Bogen DCM290P User Manual

Output Connections  
The DCM290P provides separate stereo  
outputs via analog RCA connectors and  
digital optical and coaxial connectors.  
MULTI-DISC CD PLAYER  
5-Disc  
MP3/WMA Decoders  
CD Player  
MP3/WMA decoders play finalized CD-  
R/RW discs containing MP3 or WMA  
audio files. A single CD-R/RW disc can  
contain up to 10 times more tracks than an  
ordinary audio CD. Installations requiring  
long-play background music are excellent  
applications for CD-R/RW discs contain-  
ing a large number of MP3 files.  
DCM290P*  
This 5-Disc CD Player is capable of loading and removing discs without  
interrupting play. Plays audio CDs as well as CD-R/RW discs with MP3  
and WMA files. A rack mounting kit is included.  
Playback Modes  
Audio track selection can be configured in  
a variety of ways for playback. Tracks can  
be played back sequentially or randomly,  
manually or programmed (up to 32 tracks)  
from any one or up to five loaded discs.  
Random playback functions include ran-  
dom playback of tracks from one, all or  
programmed tracks from the loaded discs.  
Once all tracks are played back in random  
order, "repeat playback" plays back the  
same selected tracks in a different random  
order.  
Product Features:  
3-mode random playback (full random,  
program random, disc sequential random)  
5-Disc CD changer  
Load or remove discs without  
interrupting play mode  
Includes rack mount kit (3 rack spaces)  
UL and C-UL listed  
Stereo output via analog RCA jacks  
and digital output via coaxial and  
optical jacks  
Power Requirements:  
Dimensions:  
120V AC  
Program up to 32 tracks from up to  
five separate discs  
MP3 and WMA decoders  
Infrared remote control  
17-1/8" W x 4-3/4" H x 15-3/4" D  
(without Rack Kit)  
Product Weight:  
13 lb.  
Intelligent Disc Scan  
When using the remote control, the disc  
skip button rotates the carousel tray  
clockwise or counterclockwise when  
searching for a disc for faster playback.  
*This product is not covered by Bogen Limited Warranty. Please contact  
Customer Service for warranty information on this product.  
Antenna Connections  
Anyone who has installed a tuner inside  
an industrial building knows that radio  
signals dont penetrate too far into these  
steel-laced structures. Because the  
TP30D is designed for industrial instal-  
lations, it contains inputs for both exter-  
nal 300-ohm (twin line) and 75-ohm  
(coaxial) antenna feeds. The 75-ohm  
input uses an “f” connector and is ideal  
for receiving feeds from antenna distri-  
bution systems or cable systems. For  
convenience, the TP30D also provides a  
built-in antenna that uses the AC line  
cord as its antenna for those situations  
that are less demanding.  
AM/FM TUNER  
TP30D  
The TP30D is a compact, commercial-grade AM/FM tuner for background music  
applications. The 18 FM and 12 AM station presets can be automatically scanned  
to make finding a desired station quick and easy. Stations are tuned using  
push-button controls and the backlit LCD display.  
Product Features:  
Provides background music on paging  
systems and MOH for telephone systems  
PLL-synthesized tuning for drift-free  
operation  
75-ohm and 300-ohm antenna connectors  
Includes FM dipole antenna and AM loop  
Heavy-duty, commercial-grade construction  
Rack-mountable (1 rack space) with an  
accessory mounting kit  
Push-button controls  
Large, easy-to-read backlit LCD station  
frequency display (orange)  
18 FM and 12 AM station presets  
Automatic scanning of station presets  
Stereo or mono operation  
Excellent sensitivity, image rejection  
and frequency response  
Precise tuning and superior signal quality  
Low hum, low noise, low distortion  
Output cables included  
UL and C-UL listed  
Whether sitting on a shelf or mounted in  
a rack, the TP30D is a great choice for an  
industrial-grade tuner.  
Accessories  
RPK46A  
Power Requirements:  
Dimensions:  
120V AC  
10-1/2" W x 1-5/8" H x 7-1/8" D  
Rack Mount  
Kit  
Product Weight:  
6 lb.  
55  
Space Saving  
CD PLAYER & AM/FM RECEIVER  
CDR1  
The CDR1 is an excellent choice for sup-  
plying background music to a paging  
system. It incorporates a full-featured  
receiver and CD player in an extremely  
compact size. When rack-mounted using  
the optional mounting kit, the CDR1 fits  
in 2 rack spaces.  
The CDR1 is a combination  
CD Player and AM/FM Receiver,  
providing reliable, economic  
background music for sound systems.  
Dual Outputs  
Product Features:  
A unique feature of the CDR1 is its dual  
outputs. Since it is designed for paging  
systems, a set of signal level RCA outputs  
is available on the rear of the unit. These  
outputs can feed the music or AUX inputs  
of a paging system directly. But the CDR1  
also contains a pair of 1-watt outputs that  
can drive 8-ohm speakers directly.These  
outputs provide a convenient way to sup-  
ply local music or to monitor the receiver  
tuning, without the need to run paging  
speakers into the equipment room.  
Single Disc CD Player & AM/FM Receiver  
Stereo & Mono signal out  
1W minimum, @ 8-ohms stereo output  
Power Requirements:  
Dimensions:  
12V DC/3A  
Adjustable loudness contour  
12- or 24-hour time display  
AUX input via 1/8" stereo jack  
Pluggable screw terminal connector  
for antenna & speaker wiring  
Rack-mountable (2 rack spaces)  
w/accessory mounting kit  
External power supply (UL and C-UL listed) included  
7-1/4" W x 2-1/8" H x 9-1/4" D  
4 lb.  
Product Weight:  
CD Player: Plays CD, CD-R, and CD-RW discs  
Browse, Repeat, Random Play, and Pause functions  
Accessories  
RK78  
Receiver: 30 Station presets: 5 selectable bands (3 FM and 2 AM)  
can be programmed with 6 stations each  
Rack  
Mount Kit  
Manual Tuner, Auto Seek, and Preset Scan features  
Pluggable screw terminal inputs for AM loop and FM dipole antennas  
F-Type connector for coaxial 75-ohm antenna  
Commercial Sound Use  
FM RADIO RECEIVER  
FMR  
The FMR is an advanced commercial music  
source. It may be housed in a compact and  
familiar package, but this is no simple tran-  
sistor radio. It has two types of outputs.The  
line output is designed to interface with  
any AUX input, and the 1-watt output has  
enough power to supply even older tele-  
phone systems’ music-on-hold inputs.  
They both have level controls so you can  
use them simultaneously. The FMR also has  
a tone control to further shape the sound.  
This economical FM Radio Receiver provides  
background music (BGM) to paging systems  
or music-on-hold (MOH) to telephone systems.  
Another feature that makes the FMR  
unique is its external antenna connec-  
tions. The built-in telescoping antenna is  
convenient, but radio signals dont pene-  
trate very far into most industrial build-  
ings. Connect the FMRs external antenna  
terminals to a roof antenna or RF distri-  
bution feed for crystal-clear reception.  
Product Features:  
Automatic Frequency Control prevents signal drift  
LED indicator illuminates when the signal is strongest  
1W output for MOH to telephone systems  
Line-level output for background music to paging systems  
Connects to a variety of telephone and paging systems  
including self-amplified speaker systems  
Built-in monitor speaker makes tuning easy  
Telescoping antenna built-in or  
connect to an external antenna  
Volume and tone controls  
Wall-mountable  
Accessories  
PRS40C  
Power Requirements: 12V or 24V DC power supply  
(not included)  
Dimensions:  
3-3/8" W x 6" H x 1-1/2" D  
1 lb.  
Power Supply  
(12V DC)  
Product Weight:  
57  
MICROPHONES  
Bogen's microphone line includes a variety of types and styles (handheld, wireless handheld/lavaliere, desktop, gooseneck, boundary,  
and overhead hanging) to meet your application needs, from paging systems to instrument and vocal reproduction. These  
microphones provide clear, natural, intelligible sound reproduction with accurate response and dependable performance.  
WIRELESS SYSTEMS  
UHF Wireless Microphone Systems  
UDMS16HH  
• UHT16 Handheld Mic  
• UDR16 UHF Receiver  
includes:  
UDMS16HH, UDMS16BP  
These Wireless Microphone Systems offer users the freedom to  
move around while speaking. System choices consist of a 16-channel  
PLL-synthesized UHF Receiver with either a handheld microphone  
or lavaliere microphone and body-pack transmitter.  
UHT16 Handheld Microphone  
Sleek metal housing with internal antenna  
UDR16  
for optimum aesthetics and durable long life  
Uni-directional neodymium dynamic cartridge  
for optimum sound, maximum feedback rejection,  
and minimal handling noise  
Audio mute switch allows convenient audio muting while  
UHT16  
leaving the transmitter "ON"  
LED indicator: Unit "ON", and "Low Battery Alert"  
Convenient, economical operation with AA alkaline  
UDMS16BP  
or NiMH batteries (2x)  
includes:  
Mic clip available (model MC28)  
2" dia. x 9-1/8" long; 10 oz.  
• UBP16 Body-Pack  
& Lavaliere Mic  
UBP16 Body-Pack w/Lavaliere Microphone  
• UDR16 UHF Receiver  
Audio mute switch allows convenient audio muting while  
UBP16  
leaving the transmitter "ON"  
LED indicator: Unit "ON", and "Low Battery Alert"  
Locking 3.5mm mini-jack provides secure connection for  
removable microphone  
Convenient, economical operation with AAA alkaline  
or NiMH batteries (2x)  
2-1/4" W x 3-3/8" H x 1-1/8" D; 3 oz.  
UDR16  
UDR16 16-Channel PLL-Synthesized UHF Receiver  
Offers 16 user-selectable frequencies in UHF 470-510 MHz band;  
120 dB dynamic range; operation up to 500 feet line-of-sight  
Accessories  
RPK89  
DigiTRU Diversity™ for maximum range and dropout protection,  
full LED indicators, 1/4" unbalanced and XLR balanced outputs,  
Tone Squelch™ for locking out potential interference, noiseless  
transmitter ON/OFF switching, and level control for unbalanced output  
Half-rack receiver design with front panel dual antennas, powered  
by wall power adapter  
Rack Mount  
(Single Unit)  
BCHM  
Headset  
Microphone  
RPK90  
Rack Mount  
(Double Unit)  
8-1/8" W x 1-7/8" H x 5-1/2" D; 1 lb.  
DESKTOPS  
DDU250  
MBS1000A  
Dynamic Desktop Microphone  
Desktop Paging Microphone  
The DDU250 is a high-quality, dynamic, gooseneck desktop  
microphone ideal for any PA system. The gooseneck permits  
the user to adjust the microphone’s angle and height to suit  
the user’s needs. 4-1/4" W x 18-1/4" H x 6-1/4" D; 3.5 lb.  
The MBS1000A is a dynamic, dual-impedance,  
desktop microphone designed for all industrial and  
commercial public address and paging applications.  
4-3/8" W x 9-3/8" H x 5-7/8" D; 1.25 lb.  
Cardioid pickup pattern  
Cardioid pickup pattern  
Locking mechanism with push-to-talk bar for  
long announcements  
Push-to-talk or lift-to-talk operation  
Impedance: Hi-Z, 50k ohms; Lo-Z, 500 ohms  
Frequency response range of 45 Hz - 15 kHz  
Sensitivity: Lo-Z: -72 dB +/- 3 dB; Hi-Z: -52 dB +/- 3 dB  
Rubberized black finish with die cast base  
4-conductor, 2-shielded cable included  
Push-to-lock and push-to-talk switches  
Excellent speech intelligibility with low ambient noise  
Effective feedback control  
16" long, fully flexible gooseneck stalk shock-mounted to a heavy  
zinc die cast base  
10-ft. cable with external contact closure outputs for the talk switches  
500-ohm Impedance  
Frequency response range of 100 Hz - 12 kHz  
Sensitivity of -76 dB +/- 3 dB  
58  
MICROPHONES  
HANDHELDS  
GOOSENECKS  
GCU250  
HDU250  
Condenser Gooseneck  
Microphone  
Professional Handheld  
Stage Microphone  
1
The GCU250 is a high-performance, partially rigid, 15- 4" ad-  
justable gooseneck condenser microphone capable of meeting  
the stringent demands of today's conference and PA systems. It is  
an intelligent choice for sound reinforcement applications. It has  
an integral XLR male connector mounting base and requires a 9V-  
52V DC phantom power source. Slim and compact, the GCU250  
is designed to minimize intrusion between the user and the audi-  
ence. 18-1/4" L x 3/4" dia.; 4 ounces.  
The HDU250 is a dynamic microphone ideal for acoustically  
demanding environments. It features a heavy zinc die cast case  
with a rigid, low noise cable-mount system and a lockable silent  
reed switch. 7" D x 2" dia.; 1 lb.  
Cardioid pickup pattern  
High-output design with excellent gain before feedback characteristics  
High sound pressure capability without distortion  
Low sensitivity to breath/pop noise  
Cardioid pickup pattern  
Clean, accurate vocal reproduction with low ambient noise  
Integral breath/wind filter  
250-ohm Impedance  
Frequency response range of 50 Hz - 18 kHz  
Sensitivity of -65 dB +/- 3 dB  
Efficient shock-mount system prevents handling and  
transmission noise  
High sensitivity Neodymium capsule  
250-ohm Low-impedance  
Frequency response range of 50 Hz - 18 kHz  
Sensitivity of -72 dB +/- 3 dB  
Integral multi-layer breath/wind filter; includes mic clip  
Rubberized black finish; rugged, reliable construction  
Snap-on windscreen  
Durable all-metal case with non-glare black finish  
GDU150  
HDU150  
Dynamic Gooseneck  
Microphone  
Handheld Stage  
Microphone  
The GDU150 is a dynamic, gooseneck microphone that features  
a durable all-metal case with a non-glare black finish. It has a  
10-1/4" long, fully flexible neck with an integral XLR mounting  
base. 17" L x 1-1/4" dia.; 1 lb.  
The HDU150 is an attractive, dynamic, all-purpose microphone ideally  
suited for a wide variety of vocal and sound reinforcement applications.  
6-1/2" D x 1-1/2" dia.; 1 lb.  
Cardioid pickup pattern  
Cardioid pickup pattern  
Outstanding speech intelligibility, feedback rejection,  
and user sound isolation  
Wide dynamic range with high-end sparkle and minimum feedback  
Low sensitivity to breath and popping sounds  
Lockable, silent on/off reed switch  
500-ohm Impedance  
Frequency response range of 70 Hz - 15 kHz  
Sensitivity of -70 dB +/- 3 dB  
Rubber shock-mount system for attenuation of handling & cable noise  
Rigid, low-noise cable-mount system  
Rubberized black finish; durable ball-shaped design; includes mic clip  
High sound pressure capability and low sensitivity  
to breath/pop noise  
Superior shock-mount system to reject handling and  
transmission noise  
Integral multi-layer breath/wind filter  
500-ohm Impedance  
Frequency response range of 100 Hz - 12 kHz  
Sensitivity of -75 dB +/- 3 dB  
Silent push-on/push-off talk switch on base  
Rugged, reliable construction  
HDO100  
Address Microphone  
The HDO100 is an attractive, dynamic microphone perfectly suited for  
public address applications and instrument sound reproduction.  
Handheld Public  
MGN19  
Industrial Gooseneck  
Microphone  
6
-1/2" D x 1-1/2" dia.; 1 lb.  
Omni-directional pickup pattern  
The MGN19 is a dynamic, push-button activated  
microphone designed for all industrial and commercial  
public address and paging applications.  
23-1/2" L x 1-1/4" dia.; 1.25 lb.  
Clean, clear reproduction with minimal ambient sound  
Low sensitivity to handling noise and stage vibrations  
Lockable, silent on/off reed switch  
500-ohm Impedance  
Frequency response range of 70 Hz - 15 kHz  
Sensitivity of -72 dB +/- 3 dB  
Internal rubber shock isolation system  
Rugged, reliable construction; includes mic clip  
Rubberized black finish  
Omni-directional pickup pattern  
Rugged, reliable design for quality, long-term use  
under strenuous handling conditions  
400-ohm Impedance  
Frequency response range of 50 Hz - 12 kHz, w/ 2 kHz boost  
Sensitivity of -76 dB +/- 3 dB  
Push-to-talk switch on MIC housing  
Accessories  
More Microphone  
Accessories  
Chrome-plated screen & gooseneck with black Cycolac® housing  
WSGCU250  
Mic Windscreen  
(for GCU250)  
MC27  
4-conductor, 2-shielded cable included  
19" flexible neck with mounting flange  
Mic Clip  
(for HD Handhelds)  
on Page 60  
59  
MICROPHONES  
OVERHEAD  
BOUNDARY  
WCU250  
SCU250  
Professional Overhead  
Hanging Microphone  
Professional Boundary  
Microphone  
The WCU250 is a back electret condenser, professional mi-  
crophone perfectly suited for picking up audio from large  
groups. Because it can hang from the ceiling and is compact in  
size, the WCU250 is very useful in minimizing visual  
distraction for the performers and the audience alike,  
and limits intrusion into the working space.  
The SCU250 is an unobtrusive, surface-mount, boundary, condenser  
microphone ideal for meeting rooms, conferences, and stage productions  
where minimum visibility is ideal. It requires an external 9V - 52V DC  
phantom power supply. 2-3/4" W x 3/4" H x 3-1/4" D; 1 lb.  
The WCU250 cable is terminated by a mini-XLR (female). A mini-  
XLR to standard XLR adapter (included) houses the pre-amplifier.  
It requires an external 9V - 52V DC phantom power supply.  
Cardioid pickup pattern  
Full, rich reproduction of voice and music  
Low sensitivity to stage vibration and thumping noise  
Well-suited in capturing the sound source and immediate surroundings  
Excellent user sound isolation with excellent feedback rejection  
Phantom power operated  
1-1/4" D x 1/2" dia.; 5 ounces.  
Cardioid pickup pattern  
250-ohm Impedance  
Clear, crisp sound with outstanding ambient noise isolation  
Frequency response range of 20 Hz - 18 kHz  
Sensitivity of -58 dB +/- 3 dB  
Low-impedance balanced output  
Mounting keyways for hanging or for secure attachment to  
the mounting surface  
Heavy-duty metal case; matte black finish  
Utilizes a superior-quality, state-of-the-art transducer element  
and circuitry  
Transformerless, direct-coupled design to ensure clear, transparent  
reproduction of even the most delicate transients at the highest  
output levels  
Phantom power operated  
250-ohm Impedance  
Outputs for interfacing with auxiliary equipment  
Frequency response range of 50 Hz - 18 kHz  
Sensitivity of -65 dB +/- 3 dB  
Integrated metal hanger; matte black finish; 20-ft. cable included  
Stainless steel, adjustable black hanger  
(other accessories listed on page 59)  
MICROPHONE ACCESSORIES  
STANDS  
MOUNTS  
MFM  
SF4 - Floor Stand  
MFM - Flange Mount  
34" to 62" adjustable height  
For use with models GCU250 & GDU150  
3-pin female XLR connector, non-shock-isolated  
Round 10" diameter die cast  
base, 9 lb.  
3-1/4" H x 1-3/4" dia. base, 3 ounces  
Grip-action clutch and  
chrome-plated tubing  
MSM - Shock-Isolated Microphone Base  
For use with models GCU250 & GDU150  
SB6 - Floor Boom Stand  
Telescopic floor stand  
Sliding 30" boom arm  
34" to 62" adjustable  
height, 6 lb.  
Chrome-plated tubing  
Tripod base  
Provides superior mechanical noise and vibration handling  
Lightweight ABS material housing  
XLR (female) connector  
Thick, shock-absorbing rubber cushion  
4-3/4" W x 1-3/4" H x 4" D; 6 ounces  
MSM  
DS3 - Desk Stand  
3" chrome-finish tube  
6" cast iron base, 3 lb.  
CABLES  
XLR25 - Microphone Cable  
For use with models HDU250,  
HDU150, & HDO100  
25' cable; Male XLR to female XLR,  
XLR25  
2-conductor plus shield  
DS3  
SB6  
SF4  
MAC - Microphone Cable Assembly  
For use with models HDU250,  
HDU150, & HDO100  
25' cable; Female XLR to stripped andtinned  
wires, 2-conductor plus shield  
MAC  
60  

Motorola RBR MotoTalk User Manual
Melissa ide line 745 192 User Manual
LG Electronics P690B User Manual
La Crosse Technology WT 3122H User Manual
JVC KD S790 User Manual
HP Hewlett Packard INTEGRITY RX3600 User Manual
Hitachi Travelstar HTS723232L9A360 User Manual
Grindmaster B 3WL User Manual
Dell Computer Accessories 3424P User Manual
Black Box Computer Accessories NBDEPC 12 User Manual