Avenview DVI C5 M SET User Manual

DVI Extender over Single CAT5 Mini SET  
Model #: DVI-C5-M-SET  
© 2010 Avenview Inc. All rights reserved.  
The contents of this document are provided in connection with Avenview Inc. (“Avenview”) products. Avenview makes no representations or warranties with  
respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any  
time without notice. No license, whether express, implied, or otherwise, to any intellectual property rights is granted by this publication. Except as set forth in  
Avenview Standard Terms and Conditions of Sale, Avenview assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products  
including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right.  
Reproduction of this manual, or parts thereof, in any form, without the express written permission of Avenview Inc. is strictly prohibited.  
Section 1: Getting Started  
1.1 Important Safeguards  
Please read all of these instructions carefully before you use the device. Save this manual for future  
reference.  
What the warranty does not cover  
Any product, on which the serial number has been defaced, modified or removed.  
Damage, deterioration or malfunction resulting from:  
Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized  
product modification, or failure to follow instructions supplied with the product.  
Repair or attempted repair by anyone not authorized by us.  
Any damage of the product due to shipment.  
Removal or installation of the product.  
Causes external to the product, such as electric power fluctuation or failure.  
Use of supplies or parts not meeting our specifications.  
Normal wear and tear.  
Any other causes which does not relate to a product defect.  
Removal, installation, and set-up service charges.  
1.2 Safety Instructions  
The Avenview DVI-C5-M-SET, DVI Extender over Single CAT5 Mini has been tested for conformance to safety  
regulations and requirements, and has been certified for international use. However, like all electronic  
equipment’s, the DVI-C5-M-SET should be used with care. Read the following safety instructions to protect  
yourself from possible injury and to minimize the risk of damage to the unit.  
Do not dismantle the housing or modify the module.  
Dismantling the housing or modifying the module may result in electrical shock or burn.  
Refer all servicing to qualified service personnel.  
Do not attempt to service this product yourself as opening or removing housing may expose you to  
dangerous voltage or other hazards  
Keep the module away from liquids.  
Spillage into the housing may result in fire, electrical shock, or equipment damage. If an object or liquid  
falls or spills on to the housing, unplug the module immediately.  
Have the module checked by a qualified service engineer before using it again.  
Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device before  
cleaning.  
3
     
1.3 Regulatory Notices Federal Communications Commission (FCC)  
This equipment has been tested and found to comply with Part 15 of the FCC rules. These limits are designed  
to provide reasonable protection against harmful interference in a residential installation.  
Any changes or modifications made to this equipment may void the user’s authority to operate this  
equipment.  
1.4 Introduction  
The DVI-C5-M-SET, DVI over Single CAT5 Extender Mini extends your PC DVI transmission distance up to 25m  
(80ft) at 1024x768 and 15m (50 ft) at 1920x1200 resolutions. With DVI-C5-M-SET, users can transmit high  
quality digital video of PC applications through one cost effective CAT-5/5e LAN cables to the remote monitor  
or projector, instead of using short and expensive DVI cables. With embedded EDID inside the adapter, your  
PC will continue to send the digital video even when the monitor is not connected. The user can then  
disconnects the monitor, place it in a remote location and reconnect it without rebooting the operating  
system.  
The DVI-C5-M-SET includes two units: transmitting and receiving units. The transmitting unit is connected to  
your PC DVI output and the receiving unit is connected to the monitor. While successfully connected, the two  
LED lights on the RJ-45 connector will blink. The transmission distance between the sending (transmitter) and  
receiving units (receiver) can be up to 25m (80ft) at XGA (1024x768) and 15m (50ft). With compact size,  
DVI-C5-M-SET is the most cost effective choice for bringing your impressive digital video to the remote display.  
-
-
DVI 1.1 compliant  
Extends the transmission length from the sources up to 25m (80ft) at 1024x768 and 15m (50ft) at  
1920x1200  
-
-
-
Units can used as Transmitter or Receiver  
Receiving unit can learn EDID information for DVI enabled display device  
Direct plug-in at Transmitter and Receiver  
1.5 Package Contents  
Before you start the installation of the converter, please check the package contents.  
-
-
-
DVI-C5-M-S  
DVI-C5-M-R  
User’s Manual  
x 1  
x 1  
x 1  
4
     
1.6 Before Installation  
Put the product in an even and stable location. If the product falls down or drops, it may cause an  
injury or malfunction.  
Don’t place the product in too high temperature (over 50°C), too low temperature (under 0°C) or high  
humidity.  
Use the DC power adapter with correct specifications. If inappropriate power supply is used then it  
may cause a fire.  
Do not twist or pull by force ends of the optical cable. It can cause malfunction.  
5
 
Section 2: Specifications  
Item  
Description  
DVI-C5-M-S  
DVI Extender Transmitter  
DVI-C5-M-R  
Units  
DVI Extender Receiver  
Unit Description  
DVI Compliance  
Video Bandwidth  
1.1  
Single Link 165 MHz (4.95Gbps)  
1920x1200 @ 60Hz: ~ 15meter (80feet) (CAT5e)  
Resolution and Distance  
1024x768: ~ 25meter (80feet) (CAT5e)  
No  
Audio Support  
1.2 Volts (peak-to-peak)  
5 Volts (peak-to-peak, TTL)  
Input TMDS Signal  
Input DDC Signal  
Input  
1 x DVI  
1 x RJ45  
1 x DVI  
1 x RJ45  
Output  
DVI-I (29-pin male digital only)  
DVI Connector  
RJ45 Connector  
Dimensions (L x W x H)  
Power Supply  
WE/SS 8P8C with 2 LED indicators  
2” x 1.6” x 0.8”  
2” x 1.6” x 0.8”  
Not Required  
Environmental  
Operating Temperature  
Storage Temperature  
Relative Humidity  
32˚ ~ 104˚F (0˚ to 40˚C)  
-4˚ ~ 140˚F (-20˚ ~ 60˚C)  
20~90% RH (no condensation)  
6
 
Disclaimer  
While every precaution has been taken in the preparation of this document, Avenview Inc. assumes no liability with respect to the  
operation or use of Avenview hardware, software or other products and documentation described herein, for any act or omission of  
Avenview concerning such products or this documentation, for any interruption of service, loss or interruption of business, loss of  
anticipatory profits, or for punitive, incidental or consequential damages in connection with the furnishing, performance, or use of the  
Avenview hardware, software, or other products and documentation provided herein.  
Avenview Inc. reserves the right to make changes without further notice to a product or system described herein to improve reliability,  
function or design. With respect to Avenview products which this document relates, Avenview disclaims all express or implied warranties  
regarding such products, including but not limited to, the implied warranties of merchantability, fitness for a particular purpose, and  
non-infringement.  
7

Nokia 1202 User Manual
Nikon Cell Phone Accessories V2 User Manual
NEC Digital Telephone Xen IPK User Manual
Motorola Cell Phone 031431a User Manual
Maxtor OneTouch STM303203OTB3E1 RK User Manual
Lenoxx Electronics CD 160 User Manual
JVC CA UXH33 User Manual
GE PGS975WEM User Manual
Dell Computer Accessories 3448P User Manual
Cambridge Audio Azur 340C User Manual