INDEX
1. Product Overview............................................................................................... 7
1.1 Key Features .............................................................................................. 7
1.2 Network Scheme......................................................................................... 7
2. Cabling and Setup.............................................................................................. 8
2.1 Package Contents ....................................................................................... 8
2.2 Choosing a place for your Disk Master.......................................................... 8
2.3 Cabling……................................................................................................. 9
2.4 Front Panel and LEDs.................................................................................10
2.5 Factory Default Settings.............................................................................11
2.6 Searching Disk Master NASF101 .................................................................11
3. Quick Configuration...........................................................................................12
3.1 Set a fixed IP address ................................................................................12
3.2 Disk Format...............................................................................................13
3.2 Map a network drive ..................................................................................14
4. Advanced Configuration.....................................................................................15
4.1 Status………...............................................................................................15
4.2 Identification.............................................................................................15
4.3 Data/Time Setting......................................................................................17
4.4 IP Config………...........................................................................................17
4.5 Disk Utility…….. .........................................................................................19
4.6 Maintenance..............................................................................................20
4.7 SMB Server. ..............................................................................................21
4.8 FTP Server…..............................................................................................25
4.9 Media Server .............................................................................................27
4.10 Print Server .............................................................................................28
4.11 BitTorrent................................................................................................29
APPENDIX A: Troubleshooting................................................................................32
Technical Specification...........................................................................................36
HDD Compatibility List...........................................................................................37
A06-NASF101_ME01(V1.0 Sep 2009)
3
Copyright Statement
No part of this publication may be reproduced, stored in a retrieval system, or
transmitted in any form or by any means, whether electronic, mechanical,
photocopying, recording or otherwise without the prior writing of the publisher.
Windows™ 98SE/2000/ME/XP/VIsta are trademarks of Microsoft® Corp. Pentium is
trademark of Intel. All copyright reserved.
The Atlantis Land logo is a registered trademark of Atlantis Land. All other names
mentioned mat be trademarks or registered trademarks of their respective owners.
Subject to change without notice. No liability for technical errors and/or omissions.
CE/EMC Restriction of Liability
The product described in this handbook was designed, produced and approved
according to the EMC-regulations and is certified to be within EMC limitations.
If the product is used in an uncertified PC, the manufacturer undertakes no warranty
in respect to the EMC limits. The described product in this handbook was constructed,
produced and certified so that the measured values are within EMC limitations. In
practice and under special circumstances, it may be possible, that the product may be
outside of the given limits if it is used in a PC that is not produced under EMC
certification. It is also possible in certain cases and under special circumstances,
which the given EMC peak values will become out of tolerance. In these cases, the
user himself is responsible for compliance with the EMC limits.
CE Mark Warning
This is a Class B product. In a domestic environment, this product may cause radio
interference, in which case the user may be required to take adequate measures.
Declaration of Conformity (
)
Hereby, We declare that this Dual Bay NAS is in compliance with the essential
requirements and other relevant provisions of Directive 2004/108/EC “Electromagnetic
Compatibility” within CE Marking Requirement.
Norma:EN 55022:2006: Class B, EN 61000-3-2: 2006, EN 61000-3-
3:1995+A1:2001+A2:2005, EN 55024:1998+A1:2001+A2:2003, EN 61000-4-2:2001
EN 61000-4-3:2007 EN 61000-4-4:2004 EN 61000-4-5:2005 , EN 61000-4-6:2006 EN
61000-4-8: 2001 EN 61000-4-11:2004
4
Limited Warranty
Our warranties (for hardware and software) do not cover data loss – back up the
contents of your drive to a separate storage medium on a regular basis. Also,
consequential damages; incidental damages; and costs related to data recovery,
removal and installation are not recoverable under our warranties.
Safety Information
•
•
Only qualified personnel should carry out technical work on the device.
When cleaning, avoid using cleaning sprays and any kinf of solution
containing alcohol or other flammable liquids.
•
•
Avoid overheating. This may reduce the life of the device.
Protect your device from humidity, direct sunlight as well as high and
extremely low temperatures.
•
•
Do no place any liquids on or close to the unit.
If the device is brought from a cold environment into a warmer installation
site, bedewing may occur. Wait until the temperature of the device has
equalised and it is completely dry before you connect to AC main.
Please use the supplied AC/DC Adapter included into g-box. If it is
connected to other devices, this product or power supply unit may be
damaged.
•
•
•
We recommend that you place the device on a non-slip surface.
Check the cable regularly for damage. Damaged cables must be replaced
immediately.
•
Ensure that no objects enter the connection sockets.
Before starting, take a few minutes to read this manual.
Read all of instructions and save this manual for later
reference.
Protect the NAS System from being bumped or dropped. Do
not place the NAS on an unstable cart, stand, or table. It
may fall, causing serious damage to the product.
5
Important information for the correct recycle/treatment procedures of this
equipment
The crossed-out wheeled bin symbol printed on the unit label or unit packaging indicates that this
equipment must not be disposed of as unsorted municipal waste but it should be collected
separately.
The waste of electric and electronic equipment must be treated
separately, in order to ensure that hazardous materials contained inside
the equipment are not buried thereby providing potential future problems
for the environment and human health. Moreover, it will be possible to
reuse and recycle some parts of the waste of electric and electronic
equipment, contributing to reduce the quantities of waste to be disposed
of and the depletion of natural resources.
As user of this equipment, you are responsible to return this waste of
electronic equipment to an authorised collection facility set up by your
Municipality. More detailed information on your nearest collection centre
can be obtained from your Municipality or from other competent local
entities.
If you are replacing the old equipment with a new equivalent product, the distributor must take-back
the old equipment free of charge on a one-to one basis as long as the equipment is of equivalent
type and fulfilled the same functions as the supplied equipment.
Your rôle in participating to the separate collection of waste of electric and electronic equipment is
essential to ensure that environmental protection and human health objectives connected to a
responsible treatment and recycling activities are achieved.
PS.: The above mentioned information are reported herewith in compliance with Directive 2002/96/CE, which requires a
separate collection system and specific treatment and disposal procedures for the waste of electric and electronic
land.com
6
1. Product Overview
Thank you for purchasing USB2.0 NAS Dongle storage device.
1.1 Key Features
•
•
•
•
Support USB mass storage device
Support Auto IP (DHCP server or DHCP Client)/ Fixed IP
Under network environment, it supports one 10/100Mbps Ethernet port
Password management provides secure access to HDD and web
management
•
•
•
•
•
Support Samba/FTP server
Support Bit Torrent download server
Support UPnP AV media Server & Apple i-Tunes® music server
Support USB Printer server
Compatible with Windows 2000/XP/VISTA, Mac 10.5.4 above
1.2 Network Scheme
When you have completed the steps in this Quick installation Guide, your connected
network should look similar to one of these 2 network configuration:
7
2. Cabling and Setup
2.1 Package Contents
The package should contain the following items:
•
•
•
•
•
Disk Master USB NAS Dongle
RJ45 CAT 5 cable
One Quick Start Guide (English, Italian)
One CD with driver, software, utility and manuals
Power Adapter AC-DC (5VDC, 1.2A)
If any item contained is damaged or missing, please contact your local dealer as soon
as possible.
2.2 Choosing a place for your Disk Master
When selecting a place to set up your Disk Array, be sure to follow these guidelines:
•
Place on a flat and stable surface capable of supporting at least 5Kg.
8
•
Place the Disk Master close enough to a network jack for the Ethernet
cable to reach it.
•
•
Leave at least 10cm of space at the rear of the device for ventilation.
Use a grounded wall outlet (uninterruptible online power supply with AVR
is recommended.)
•
Avoid an electrical outlet controlled by wall switches or automatic timers.
Accidental disruption of the power source may wipe out data in the
memory of your computer or Disk Array.
•
•
Keep the entire system away from potential sources of electromagnetic
interference, such as loudspeakers, cordless telephones, etc.
Avoid direct sunlight, excessive heat, moisture, or dust.
2.3 Cabling
Following is a quick installation guide to get you up and running. For further details on
each of the settings, please refer to manual on CD.
•
•
Please plug HDD Enclosure by USB 2.0 port on rear panel.
Please use the ethernet cable to connect the device and the Router/Switch
in the network.
•
Please turn on the Power Switch.
Please check the following pictures.
9
2.4 Front Panel and LEDs
LED
MEANING
Power
Link
Lit blue if powered on.
Flashes yellow when sending/receiving data.
TASTO
Reset
MEANING
Push RESET button for 30s to recovery default values on NAS
Dongle.
PORT
MEANING
Power Jack
Connect the supplied power adapter to this jack.
LAN
Please use the Ethernet cable to connect the Disk Master to
network.
USB
Please use the USB cable provided to connect an HDD
enclosure or the printer cable to connect the device’s USB port
(for printer server).
10
2.5 Factory Default Settings
The TCP/IP protocol stack and Ethernet network adapter must be installed. If not,
please refer to MS Windows relative manuals.
Before you configure this device you need to know the following default settings:
•
•
•
Username: admin
Password: atlantis
IP Address: Obtained by DHCP Server (if a DHCP isn’t available, the
device will be reacheable with the following IP address: 192.168.1.1).
Server name: DISKMASTER
•
2.6 Searching Disk Master NASF101
To run SearchUtility:
1.
2.
Insert the Cd-Rom provided and wait for autorun.
Select the product Disk Master NASF101 and after click on SearchUtility
icon.
3.
Now, the utility will discovery the NAS dongle and it show it. Press
Connect to access to the web management.
If SearchUtility will not show any device, please check
cabling.
4.
Log on the web interface using default credential (username=”admin”,
password=”atlantis”) and press OK to confirm.
11
3. Quick Configuration
3.1 Set a fixed IP address
In order to map network drive permanently on any PCs that require them, we suggest
to fix an IP Address to the LAN interface of NAS Dongle.
To set a fixed IP address on the NAS dongle, click on IP Config menu’ and set this
function on Static IP as below; after, insert the IP Address, Subnet Mask and
Gateway to the NAS dongle. If you would like to use the BT client/server, you must set
also the primary and secondary DNS Server and press Apply to confirm all
configuration.
FIELD
IP
MEANING
Insert the IP Address to assign to the NAS dongle.
Insert the Subnet Mask to assing to the NAS dongle.
Insert the Default Gateway (eg: Router’s IP Address) to assign
to the NAS dongle.
Subnet Mask
Gateway
Primary DNS
Insert the primary DNS address.
12
Secondary DNS
Insert the secondary DNS address.
3.2 Disk Format
During the first installation, it is necessary to format the disk contained into HDD
enclosure in order to create some default folder and save configuration (for BT client).
Please select Disk Utility and press Format to start the formatting procedure.
FIELD
MEANING
Disk ID
Show disk type ID and some disk information.
Press this button to format disk.
Format Disk
13
Scan Disk
Press this button to start a diagnosys procedure of the disk
connected to the NAS dongle.
3.2 Map a network drive
To create a new network drive, please see following procedure:
•
Click Start->Computer (for Windows VISTA) or My Computer->Tools
(for Windows 2000/XP)
•
•
Click on Map Network Drive
Fullfill the field Folder with the path “//x.y.z.k/PUBLIC” (where x.y.k.z
means the IP Address assigned to the NAS Adapter).
Click on Different user name ad insert Guest as username and “”
(empty) as password. Click OK to confirm.
•
•
Enable Reconnect at login option and click on Finish.
Now it is possible to use the PUBLIC folder contained on the USB disk as a local
folder.
14
4. Advanced Configuration
4.1 Status
Provide the basic information for NAS Dongle.
4.2 Identification
You can change and modify your host & group name, and password from this page.
Click “Apply” to save the setting.
In Window O/S, right click on “My computer”, choose “Properties”, and go to the
computer name tab to see your current workgroup.
For Mac O/S to join windows workgroup, open the directory access utility (under
Applications-> utilities), select SMB and click configure to modify the settings
(administrator access required to access this option.)
15
FIELD
MEANING
Host Name
This is used to identify your device on the network. If you
prefer a different name, type in the new name and click
“Apply” to save setting.
Group Name
This should be same as your workgroup. In general, the
default “WORKGROUP” will be OK. But if your workstation
belongs to different workgroup, type in the correct group name
to modify.
Press Apply to save configuration.
We strongly suggest you to change the password as soon as you
logged in, to prevent unauthorized access.
16
4.3 Data/Time Setting
You can change time setting form this page. Clicks “Apply” to save the setting. By
default SNTP is in network time service, your can also select “Synchronize to PC”. If
internet access is available we recommended setting SNTP to Network time service
instead.
4.4 IP Config
By default, the “IP config” is set to “Automatic IP”. This is the recommended setting
and will allow NAS Dongle to obtain its IP address automatically. If you prefer setting
it manually, select the static IP option, enter your own value and click apply to confirm
the new setting.
Setting it manually is useful when it often obtain a different IP address but you have a
static IP address in order to mount the network drive or setup port forwarding as an
example.
17
18
4.5 Disk Utility
In this page, you can manage the hard disk setting.
FIELD
MEANING
Format Disk
For the first time installation, you need to format hard disk into
FAT32 system file, this procedure applies to either new or
used hard disk.
Scan Disk
After the scan, it will show the number of file content and
health status for the hard disk.
19
4.6 Maintenance
This page allows you to update NAS dongle firmware, to go back to default setting or
to reboot NAS system.
Follow the steps below to update the loader and firmware for NAS Dongle:
1.
2.
Obtain the latest firmware from your vendor.
Store the firmware file in your computer and decompress them if
necessary.
3.
4.
5.
6.
Browse your system and locate the firmware (BIN file).
Click on “Upload”.
Confirm the pop-up massage to start the update.
Wait and DO NOT click anywhere else or turn off the power! This might
take a few minutes.
7.
8.
9.
Once the update is done, it will prompt you to reboot the device.
Click on ”Reboot” to restart the device.
Wait for about one minute and then go to the status page to confirm the
update is successful.
20
Click on Reset and go back to default password setting. Besides SAMBA/FTP account
setting will still remain in the NAS Dongle, rest of setting will go back to factory
default.
Press Reboot button to restart the USB NAS Dongle.
4.7 SMB Server
SMB server allows you to share data or files through LAN environment. A default
“guest” folder is created and shared to all from NAS Dongle.
Use ONLY English alphabet for folder names and no special
characters when creating new folders.
21
How to create a SMB user
Click on the “Add” button and type new account name/password and than “Next”.
In the same time, NAS Dongle will also crate a SAMBA folder named “atlantis”; now
You have to select “atlantis” and add in to “Sharing List”.
22
You can “Run” from window start button, type \\ follow by the IP address
(eg:\\192.168.1.121), and click OK to continue.
Type “atlantis” and password to login.
Now you have set up the folder that you wish to share on your NAS Dongle. The
shared folder can be accessed from other computer on your local network.
23
How to modify account password
Select the “atlantis” and than click “Modify”.
Enter new password and click “Apply” to save setting.
24
How to delete a SMB (SAMBA) account
Select an account you wish to delete, click “Delete” to proceed. Please note that all
the data inside the folder will be lost after the delete.
4.8 FTP Server
Remember to “Enable” the FTP service on the status page, when you plan on using
the FTP server.
The standard port for FTP service is 21. If required, you can change it into any port
ranging from 1025-6550. But in general, we recommended using the default port of
21.
FIELD
MEANING
FTP Status
Enable or disable FTP Server.
25
Port
Select the listening service port for FTP server.
File Language
Support
By default, the encoding is set to English. If you want to store
or transfer files with a different encoding (different language),
choose the corresponding language for the drop down list.
In order to transfer and view the files correctly, it is important that
you select the correct language.
To be able to share FTP resource via internet, you need a router
to assign the external IP to your NAS Dongle. Contact your router
vendor on how to assign the external IP.
Procedures to create, editing and remove FTP account are the
same explained for SMB Server (please refer to SMB Server).
26
4.9 Media Server
The Media server on NAS Dongle can be used to share your photo and music files with
a XBOX360® video game console from Microsoft that is connected to the same local
network. Before you start, make sure both devices are connected to the same local
network and turned on.
On your NAS Dongle, go to the XBOX360® media page and make sure photo and are
set to share folder and not disable, e.g. the “PUBLIC” is enabled Photo directory.
1.
2.
Go to media, select either Music or Pictures, and press A to continue on
your XBOX 360®.
Press X to change the source and select your network drive, it should
show up as storage-xxx and display the folder that you have set up earlier
on your NAS Dongle.
3.
Inside the shared folder, you can access to your picture or music files,
depending on which mode you are currently using. Select the files you
would like to see or to listen, and start playback.
27
4.10 Print Server
1.
Install your Printer driver into your computer, (for example. if Epson PL-
6200L Printer is connected to the NAS, you must install PL-6200L driver in
to the computer first). After driver installation, please click “Start” →
“Setting” → “Printer and Faxes” → “Add a printer”→ “Next”.
Connect the USB printer in to NAS Dongle, your network environment
should looks like diagram below:
2.
3.
4.
Select “Local printer” and click “next” to continue.
Select “Create a new port type of port:” , choose “Standard TCP/IP
Port”, and click “next” to continue.
5.
6.
7.
Enter the NAS Dongle IP address than click “next” to continue.
Select “Custom” and go to “setting”.
Select LPR in protocol, and give a queue name eg:LRxxx; select LPR byte
enable and click “OK” to finish the port setting.
8.
9.
Click “Finish” to complete TCP/IP printer setup.
Go to Pinter server page and check printer server status. If status shows
“OK”, the printer is setting up successfully.
28
The NAS Dongle Printer server does not support GDI/Host-based
printers. For some Multi Function Printers (MFP); scanning
functions might not be functional probably. Please contact Printer
Manufacture for detail Specifications.
4.11 BitTorrent
Disk Master NASF101 supports Bit torrent download independently without using PC
resource. Maximum of 4 bit torrent downloads can be running at the same time.
FIELD
MEANING
System ID
Show system ID for BT download.
Set the share folder where donwload BT contents.
Set the listening service port for BT Server.
Download Path
Server Port
29
Upload Limit
Set the upload limit for BT Server/Client
Show current downloads status.
Dowload
Queue
1.
Select “Bit torrent” server, choose the “Download Path” you wish to
use, then click “Apply” to save setting. (DO NOT change path setting
while perform BT downloading, otherwise the downloaded job will be
missing).
2.
3.
4.
Server port range can be chosen from 6881 to 65535. (6881 is the default
setting)
Create a upload speed limit: 0=unlimited upload speed (4 KBps is the
minimum speed), and click “Set” to save setting.
Click “Browse”, select .torrent file, and upload to the download queue.
The jobs listed in the Download Queue will be removed when Disk
Master is turned off or HDD is removed.
Delete a BT job
After the download complete, click “Remove” to delete the download Jobs form
queue window.
Jobs listed in the “Download Queue” will be removed when
Turbo NAS is turned off or HDD is removed.
30
Mail Notification
After the download is successful, an email will be send to designated email address.
Click “Mail setup”, input SMTP server, recipient email, SMTP A/C, Password, and click
“Apply” to save setting.
FIELD
MEANING
Enable
Enable email notification function.
Insert SMTP server address.
Inser the sender mail address that will be shown as email’s
sender.
SMTP Server
Sender
Recipient
Insert the recipient mail address.
Mail
Authentication
Check this option if SMTP server required authentication.
Username
Insert the username required by SMTP server.
Insert the password required by SMTP server.
Password
31
APPENDIX A: Troubleshooting
This chapter covers potential problems and the corresponding remedies.
A.1 Using LEDs to Diagnose Problems
The LEDs are useful aides for finding possible problem causes.
A.1.1 Power LED
The PWR LED on the front panel does not light up.
Steps
1
Corrective Action
Make sure that the Disk Master’s power adaptor is connected to the
device and plugged in to an appropriate power source. Use only the
supplied power adaptor.
2
Check that the Disk Master and the power source are both turned
on and the device is receiving sufficient power.
Check the power jack and verify.
If the error persists, you may have a hardware problem. In this
case, you should contact your vendor.
3
4
A.1.2 LED Link
The LAN LED on the front panel does not light up.
Steps
1
Corrective Action
Check the Ethernet cable connections between the Disk Master and
the computer or hub.
2
3
4
Check for faulty Ethernet cables.
Make sure your computer’s Ethernet card is working properly.
If these steps fail to correct the problem, contact your local
distributor for assistance.
A.2 Login: Username and Password
I forgot my login username and/or password.
Steps
1
Corrective Action
If you have changed the password and have now forgotten it, you
will need to upload the default configuration file. This will erase all
32
custom configurations and restore all of the factory defaults
including the password.
2
3
Before you configure this device you need to know the following
default settings:
•
•
•
Username: admin
Password: atlantis
IP address: by DHCP, (If a DHCP server isn’t available in
the network, the Disk Master will use 169.254.0.1).
Server name: DISKMASTER
•
It is highly recommended to change the default username and
password. Make sure you store the username and password in a
save place.
A.3 WEB Interface
I cannot access the web configurator.
Steps
Corrective Action
1
2
Make sure you are using Internet Explorer 7.0 and later versions.
Delete the temporary web files and log in again.
In Internet Explorer, click Tools, Internet Options and then click the
Delete Files ... button.
When a Delete Files window displays, select Delete all offline
content and click OK. (Steps may vary depending on the version of
your Internet browser.)
E.G. Internet Explorer
>Reset).
7
(Tools->Internet Options->Advanced-
I cannot access the web configurator.
Steps
Corrective Action
Check Link LED (green).
Make sure you are using the correct IP address of the Disk Master.
Found the new IP address of the Disk Master with Utility.
Reset the device.
1
2
3
4
33
A.4 General
Some of the functions and menus are not available!
Steps
1
Corrective Action
Many of the functions require a hard drive to be installed. Make sure
you have at least one HDD installed and formatted in EXT2 or EXT3.
What is the limitation of user on the NAS FTP, Samba and account mode?
Steps
1
Corrective Action
There are following limitations.
1. Maximum user number: FTP: 8 Users, Samba: 16 Users (total 64
sessions at the same time).
2. FTP Server: Maximum is able to create 16 users accountsand
maximum 16 folders shared by one account).
3. Samba Server: Share Level Access (maximum 16 folders shared
by root).
Does the NAS support Hard disk Power Management?
Steps
1
Corrective Action
The NAS uses standby mode for power management (Sleep time), if
there is no any activity ranging 5-60 min. You can go to web base >
Disk Utility > Set Sleep Time function (0 to disable function, range
5-60 to enable function.
What is the protocol of network file sharing system using by Disk Master?
Steps
1
Corrective Action
Disk Master has the built-in Samba Server for file sharing, it is using
SMB (Server Message Block) protocol to integrate TCP/IP, NETBUEI
and IPX/SPX protocol. In other words, if the client PC that can
support TCP/IP, NETBUEI or IPX/SPX, it will be compatible with
DUAL HDD NAS. You can also use the built-in FTP Server for file
sharing with Internet client.
34
Why My USB Printer can not be detected by the NAS Printer server?
Steps
1
Corrective Action
The NAS Printer server does not support GDI/Host-based printers.
For some Multi Function Printers (MFP); scanning functions might
not be functional probably. Please contact Printer Manufacture for
detail Specifications
A.5 Support
For technical questions and support, please contact our help-desk by ticket on
Atlantis Land
Via Pelizza da Volpedo, 59
20092 Cinisello Balsamo (MI) - Italy
Tel: +39. 02.00.632.300
Fax: +39. 02.66.016.666
Website: http://www.atlantis-land.com
Email: [email protected]
35
Technical Specification
Interfaces
LAN: Rj-45 10/100 Ethernet Port (auto MDI/MDI-X)
USB: USB 2.0 Port
LED: 2 diagnostics LEDs (Power, Link)
Button: Reset
HDD Specifications
Support USB Storage: USB HDD Enclosure, USB Flash
Driver (minimum 4GB)
Support HDD Capacity : up to 2TB (for single volume)
File System Specifications File System : FAT32 compatible
Single File Support: up to 127GB (over FAT32 4GB
limitation)
Advanced Features
OS Supported
Built-in FTP Server for file access from over Internet
iTunes® Server (for iTunes® player)
UPNP AV Media Server (for Xbox 360® and PS3®)
BitTorrent Client and Server
USB Print Server
SAMBA Server
DHCP Server
Microsoft® Windows® 2000, XP, VISTA
Linux and Unix (over SMB/FTP)
MAC OS 10.5.4
Dimensions
Weight
70mm x 32 mm x 24 mm (W*H*D)
130g
Operating Temperature
Storage Temperature
Operating Humidity
Storage Humidity
Input Power
0°C to 35°C
0°C to 50°C
10%-90% (without condensing)
5%-95% (without condensing)
5V DC @ 1.2A
Power Consumption
Agency and Regulatory
< 7 watts
CE
36
HDD Compatibility List
Brand
Product Family Model Number
Drive Size (GB)
1000
750
500
500
400
400
320
320
250
250
250
160
500
500
400
400
320
320
250
1000
750
500
320
250
160
750
500
400
320
250
250
Hitachi
Hitachi
Hitachi
Hitachi
Hitachi
Hitachi
Hitachi
Hitachi
Hitachi
Hitachi
Hitachi
Hitachi
Hitachi
Hitachi
Hitachi
Hitachi
Hitachi
Hitachi
Hitachi
Seagate
Seagate
Seagate
Seagate
Seagate
Seagate
Seagate
Seagate
Seagate
Seagate
Seagate
Seagate
Deskstar 7K1000 HDS721010KLA330
Deskstar 7K1000 HDS721075KLA330
Deskstar T7K500 HDT725050VLA360
Deskstar T7K500 HDT725050VLA380
Deskstar T7K500 HDT725040VLA360
Deskstar T7K500 HDT725040VLA380
Deskstar T7K500 HDT725032VLA360
Deskstar T7K500 HDT725032VLA380
Deskstar T7K500 HDT725025VLA360
Deskstar T7K500 HDT725025VLA380
Deskstar T7K250 HDT722525DLA380
Deskstar T7K250 HDT722516DLA380
Deskstar P7K500 HDP725050GLA380
Deskstar P7K500 HDP725050GLA360
Deskstar P7K500 HDP725040GLA380
Deskstar P7K500 HDP725040GLA360
Deskstar P7K500 HDP725032GLA380
Deskstar P7K500 HDP725032GLA360
Deskstar P7K500 HDP725025GLA380
Barracuda 7200.12 ST31000528AS
Barracuda 7200.12 ST3750528AS
Barracuda 7200.12 ST3500418AS
Barracuda 7200.12 ST3320418AS
Barracuda 7200.12 ST3250318AS
Barracuda 7200.12 ST3160318AS
Barracuda ES
Barracuda ES
Barracuda ES
Barracuda ES
Barracuda ES
Barracuda ES
ST3750640NS
ST3500630NS
ST3400620NS
ST3320620NS
ST3250620NS
ST3250820NS
37
Seagate
Seagate
Seagate
Seagate
Seagate
Seagate
Seagate
Seagate
Seagate
Seagate
Seagate
Seagate
Seagate
Seagate
Seagate
Seagate
Seagate
Seagate
Seagate
Seagate
Seagate
Seagate
Seagate
Seagate
Seagate
WD
Barracuda ES.2
Barracuda ES.2
Barracuda ES.2
Barracuda ES.2
ST31000340NS
ST3750330NS
ST3500320NS
ST3250310NS
1000
750
500
250
1500
1000
1000
750
750
640
500
500
320
160
250
250
250
250
200
160
160
160
160
80
Barracuda 7200.11 ST31500341AS
Barracuda 7200.11 ST31000333AS
Barracuda 7200.11 ST31000340AS
Barracuda 7200.11 ST3750330AS
Barracuda 7200.11 ST3750630AS
Barracuda 7200.11 ST3640323AS
Barracuda 7200.11 ST3500320AS
Barracuda 7200.11 ST3500620AS
Barracuda 7200.11 ST3320613AS
Barracuda 7200.11 ST3160813AS
Barracuda 7200.10 ST3250620AS
Barracuda 7200.10 ST3250410AS
Barracuda 7200.10 ST3250310AS
Barracuda 7200.10 ST3250820AS
Barracuda 7200.10 ST3200820AS
Barracuda 7200.10 ST3160815A
Barracuda 7200.10 ST3160815AS
Barracuda 7200.10 ST3160215A
Barracuda 7200.10 ST3160215AS
Barracuda 7200.10 ST380815AS
Barracuda 7200.10 ST380215AS
Caviar Blue
Caviar Blue
Caviar Blue
Caviar Blue
Caviar Blue
Caviar Blue
Caviar Blue
Caviar Blue
Caviar Blue
80
WD7500AAKS
WD6400AAKS
WD5000AAKS
WD5000AAJS
WD4000AAKS
WD4000AAJS
WD3200AAKS
WD3200AAJS
WD2500AAKS
750
640
500
500
400
400
320
320
250
WD
WD
WD
WD
WD
WD
WD
WD
38
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
WD
Caviar Green
Caviar Green
Caviar Green
Caviar Green
Caviar Green
Caviar Green
Caviar Green
Caviar Black
Caviar Black
Caviar Black
Caviar Black
AV-GP
AV-GP
AV-GP
RE3
RE3
RE3
RE3
RE3
RE2
RE2
RE2
RE2
RE2
RE2
RE2
RE2
RE2-GP
RE2-GP
RE2-GP
Caviar SE16
Caviar SE16
Caviar SE16
Caviar SE16
WD20EADS
WD15EADS
WD10EADS
WD10EACS
WD7500AACS
WD6400AACS
WD5000AACS
WD1001FALS
WD7501AALS
WD6401AALS
WD5001AALS
WD10EVCS
WD7500AVCS
WD5000AVVS
WD1002FBYS
WD7502ABYS
WD5002ABYS
WD3202ABYS
WD2502ABYS
WD7500AYYS
WD5001ABYS
WD5000ABYS
WD4001ABYS
WD4000ABYS
WD3201ABYS
WD2502ABYS
WD1601ABYS
WD1000FYPS
WD7500AYPS
WD5000ABPS
WD6400AAKS
WD7500AAKS
WD5000AAKS
WD4000AAKS
2000
1500
1000
1000
750
640
500
1000
750
640
500
1000
750
500
1000
750
500
320
250
750
500
500
400
400
320
250
160
1000
750
500
640
750
500
400
39
WD
WD
Samsung
Samsung
Samsung
Samsung
Caviar SE16
Caviar SE16
Spinpoint F1
Spinpoint F1
Spinpoint F1
Spinpoint F1
Spinpoint F1 RAID
Class
WD3200AAKS
WD2500AAKS
HD103UJ
HD753LJ
HD642JJ
320
250
1000
750
640
500
HD502IJ
Samsung
HE103UJ
1000
Samsung
Samsung
Samsung
EcoGreen F1 DT
EcoGreen F2
EcoGreen F2
HD103UI
HD103SI
HD502HI
1000
1000
500
All rights registered
Microsoft and Windows are registered trademarks of Microsoft Corporation
All trade names and marks are registered trademarks of respective companies
Specifications are subjected to change without prior notice. No liability for technical
errors and/or omissions.
This product may not work with older generation SATA drives. For more info please
check on the web site (list of Hard Drive/Printer tested).
Embedded printer server does not support GDI/Host-based printers. For some Multi
Function Printers (MFP); scanning functions might not be functional probably.
Performance and Throughput are influenced by many factors
40
|