ENGLISH
TV+
ENGLISH USER MANUAL Version 1.0
Dear Customer,
Thank you for choosing this ARCHOS product. We hope that you will enjoy
using it and that it will give you satisfaction for many years to come.
ensure that you get access to our help line, to the ARCHOS Content Portal,
and the TV Program Guide.
Wishing you the best multimedia experience,
The ARCHOS Team.
All the information contained in this manual was correct at the time of
publication. However, as we are often updating and improving our prod-
ucts, your device’s software may have a slightly different appearance or
PRGL¿HGꢀIXQFWLRQDOLW\ꢀWKDQꢀSUHVHQWHGꢀLQꢀWKLVꢀPDQXDOꢁ
Entertainment
way
TV+
MANUAL V1.0
TABLE OF CONTENTS > P. 3
6 . TRANSFERRING FILES ..................................................................4 1
6.1 USB HOST CONNECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
6.2BROWSING OTHER COMPUTERS ON THE NETWORK . . . . . . . . . . . . 42
6.3CONNECTING THE ARCHOS TO A COMPUTER . . . . . . . . . . . . . . . . . 43
7 . MAIN SETTINGS............................................................................. 4 6
7.1“SOUND” SETTINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
7.2“TV SETTINGS”. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
7.3“APPEARANCE” SETTINGS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
7.4 “NETWORK” SETTINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
7.5“LANGUAGE AND REGION” SETTINGS . . . . . . . . . . . . . . . . . . . . . . . 52
7.6“TV CONTROL” SETTINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
7.7“CLOCK” SETTINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
7.8 “FIRMWARE AND PLUG-INS” SETTINGS . . . . . . . . . . . . . . . . . . . . . 54
7.9 UPDATING THE FIRMWARE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
7.10 “SYSTEM” SETTINGS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
8 . TV RECORDING: HARDWARE SETUP ..................................5 8
8.1 CONNECTION PRINCIPLES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
8.2 CONNECTING A TUNER TO YOUR ARCHOS. . . . . . . . . . . . . . . . . . . . 58
8.3 CONNECTING WITH A TV ONLY (NO EXTERNAL TUNER) . . . . . . . . . 61
9 . THE TV PROGRAM GUIDE..........................................................6 2
9.1 WHAT’S REQUIRED TO USE THIS FUNCTION? . . . . . . . . . . . . . . . . . 62
9.2 ACTIVATING THE TV PROGRAM GUIDE ONLINE . . . . . . . . . . . . . . . . 62
9.3 TRANSFERRING THE PROGRAM DATA TO THE ARCHOS . . . . . . . . . 63
9.4 CONFIGURING THE TV CONTROL SETTINGS . . . . . . . . . . . . . . . . . . 63
9.5 SCHEDULING YOUR RECORDING . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
10 . OTHER RECORDING FUNCTIONS..........................................6 8
10.1 THE “TV SCHEDULER” . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
10.2 RECORDING VIDEO MANUALLY . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
10.3 RECORDING AUDIO MANUALLY . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
10.4 EDITING YOUR RECORDINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
TROUBLESHOOTING..........................................................................7 4
RESTARTING / RESETTING YOUR ARCHOS . . . . . . . . . . . . . . . . . . . . . . 74
SYSTEM RECOVERY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
REPAIR AND FORMATTING TOOLS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
TECHNICAL SPECIFICATIONS........................................................7 7
TECHNICAL SUPPORT INFORMATION ..........................................................................79
TV+
MANUAL V1.0
STARTING UP > P. 4
STARTING UP
DESCRIPTION OF THE ARCHOS DEVICE
LED INDICATORS
The LED indicators are located on the front of the device, on the left side:
Red light:
• light on: the ARCHOS is in standby mode.
• ÓCUJKPIꢀꢁVJGꢁ#4%*15ꢁKUꢁUVCTVKPIꢂ
Green light:
• light on: the ARCHOS is on.
CONNECTORS
On the right side of the device:
USB A Connector (for USB Host) to connect a compatible USB device such as
a USB Flash key, a digital camera or a portable media player.
1.
2 .
USB B Connector (with optional cable): to connect the ARCHOS to a computer.
See Transferring FilesꢀWRꢀOHDUQꢀKRZꢀWRꢀWUDQVIHUꢀ¿OHVꢀWRꢂIURPꢀDQRWKHUꢀ86%ꢀGHYLFHꢁ
TV+
MANUAL V1.0
STARTING UP > P. 5
On the back of the device:
3 .
Reset button: ONLY use this button if you need to restart the InstallationWizard.
When you press this button, the ARCHOS will restart and a message will pop up
VQꢁEQPÒTOꢁVJGꢁTGNCWPEJꢁQHꢁVJGꢁYK\CTFꢂꢁ+Hꢁ[QWꢁFQꢁPQVꢁTGURQPFꢁYKVJKPꢁꢃꢄꢁUGEQPFUꢅꢁ
the wizard will be automatically relaunched. See: The Installation Wizard.
ATTENTION: if you use the reset button and relaunch the wizard, no
data will be erased but your TV connection settings will be lost, and you
will have to set them up again through the wizard.
SPDIF Out*:ꢁVQꢁEQPPGEVꢁVQꢁCPꢁCORNKÒGTꢁVJCVꢁJCUꢁCPꢁ52&+(ꢁCWFKQꢁKPRWVꢁꢆUWEJꢁCUꢁ
4 .
5 .
a ‘home cinema’).
Audio/Video inputs and outputs: to connect to the Audio and Video con-
nectors of your TV (and tuner), using the supplied cables. Audio/Video inputs
and outputs available: RGB**, Component (YPbPr)*, Composite Video**, S-
Video***, Stereo Analog Audio.
Check the manual of yourTV (and tuner) to see what types of connectors your
device has.
Ethernet connector*: you can plug an Ethernet cable to connect to the
6 .
7 .
Internet and to your local network.
DC in: to connect the included power adapter.
In the event that your ARCHOS freezes or does not respond anymore,
disconnect the power adapter, wait for 15 seconds and reconnect it.
When the red LED indicator stops blinking, press the Power button on
the supplied remote control to turn on your device.
HDMI Out*: to connect to a television that has an HDMI input (such as an‘HD
Ready’TV).
8 .
* requires optional cable(s)
** US: requires optional cable(s)
*** Europe: requires optional cable(s)
TV+
MANUAL V1.0
STARTING UP > P. 6
THE REMOTE CONTROL
• You will need the remote control in order
+
to control your ARCHOS TV .
• Your ARCHOS device has an infrared re-
ceiver located on the front of the device,
on the left side (next to the LED indica-
tors). Point the supplied remote control
towards the infrared receiver.
1.
This part of the remote control is used for the Web Browser.
Use the direction pad to move the cursor that appears on the screen.
Pressing this button will activate 2 modes at the same time:
-
the “left button lock” mode: the direction pad will act as if you
moved a mouse while holding its left button at the same time. It will
allow you, for example, to use sliders or other dragging controls.
- the navigation buttons, at the top right, will allow you to move from
QPGꢁNKPMꢇÒGNFꢁVQꢁCPQVJGTꢁꢆPQTOCNN[ꢁVJG[ꢁUETQNNꢁVJGꢁRCIGꢁWRꢇFQYPꢈꢂ
Press again to disable these 2 modes.
This button is like a mouse’s left button. Depending on where you are in
the interface, it will allow you to open a link, execute a function, etc.
This button is like a mouse’s right button. Depending on where you are
in the interface, pressing this button will display a contextual menu.
2 .
These are the main buttons:
Navigation buttons: move from one item to another
Enter/Accept or Play/Pause/Resume
Exit button: Escape/Back/Stop
Up Accelerator button: High-speed fast forward, list scrolling or zoom in
TV+
MANUAL V1.0
STARTING UP > P. 7
Down Accelerator button: High-speed fast rewind, list scrolling or zoom out
Menu button: Display a text description of the available menu icons
Switch the display of the image between the ARCHOS and a tuner (not
in HDMI output mode), if you have connected one to the ARCHOS’ in-
put connectors. See TV Recording: Hardware Setup.
Power button:Turn the ARCHOS on/off
Volume buttons: Increase/decrease volume
Mute sound
Tab button:Tab between available screens
The keyboard can be used to enter a Web address, write an e-mail, name/re-
name a folder, etc:
3 .
Caps Lock key
Green Alt key: enable the keys’ green secondary functions
Blue Alt key: enable the keys’ blue secondary functions
Shift key
delete character before cursor
In order to type one of the green/blue secondary characters in capital letters
(é, è, ç, etc.), press Caps Lock, then Alt green/blue, and press the correspond-
ing key.
CONNECTING THE ARCHOS TO YOUR TV
Connection Diagram for Europe:
TV+
MANUAL V1.0
STARTING UP > P. 8
Connection Diagram for North America: *
* North America: If your TV does not have an S-video input connector, use a
standard male/male RCA cable (on the yellow video jack) instead of the sup-
plied S-video cable.
ꢃꢂ Connect the ARCHOS’ outputs to your TV’s inputs as shown above. If you have an
HDMI cable, you can connect it now.
2. Connect the included power adapter to the jack labeled DC-IN on the back of the
ARCHOS.
3. Then plug the other end of the power adapter into an available wall socket.
96JGꢁÒTUVꢁVKOGꢁ[QWꢁEQPPGEVꢁVJGꢁRQYGTꢁCFCRVGTꢅꢁVJGꢁ#4%*15ꢁYKNNꢁUVCTVꢁCWVQOCVK-
cally.The red LED indicator will start blinking while the device is starting.When
the ARCHOS is on, the green LED will light up.
8VHꢀRQO\ꢀWKHꢀVXSSOLHGꢀ$5&+26ꢀSRZHUꢀDGDSWHUꢀDVꢀRWKHUꢀDGDSWHUVꢀPD\ꢀGDPDJHꢀ
this device (even if they give the same voltage rating).
4. Make sure that your TV is switched to the AV input which the ARCHOS is con-
nected to (on the back of the TV).
5. Once the ARCHOS turns on (green light), your device will cycle between three
different video output modes in order for you to select the correct one.Wait until
[QWꢁUGGꢁCPꢁKOCIGꢁKPꢁEQNQTꢁQPꢁ[QWTꢁ68ꢁꢆVJKUꢁOC[ꢁVCMGꢁWRꢁVQꢁꢉꢄꢁUGEQPFUꢈꢅꢁCPFꢁRTGUUꢁ
OK on the remote control.
6. 6JGPꢁHQNNQYꢁVJGꢁQPꢊUETGGPꢁKPUVTWEVKQPUꢁꢆ+PUVCNNCVKQPꢁ9K\CTFꢈꢁVQꢁÒPKUJꢁKPUVCNNKPIꢁVJGꢁ
ARCHOS.
See TV Recording: Hardware Setup to learn how to connect a tuner to the ARCHOS
in order to schedule a TV recording (manually or via the TV Program Guide).
TV+
MANUAL V1.0
STARTING UP > P. 9
THE INSTALLATION WIZARD
• 6JGꢁ+PUVCNNCVKQPꢁ9K\CTFꢁYKNNꢁJGNRꢁ[QWꢁEQPÒIWTGꢁVJGꢁOCKPꢁHWPEVKQPUꢁQHꢁVJGꢁ#4%*15ꢂꢁ
• If you ever need to relaunch the Installation Wizard, press the reset button.The
#4%*15ꢁYKNNꢁTGUVCTVꢁCPFꢁCꢁOGUUCIGꢁYKNNꢁRQRꢁWRꢁVQꢁEQPÒTOꢁVJGꢁTGNCWPEJꢁQHꢁVJGꢁ
YK\CTFꢂꢁ+Hꢁ[QWꢁFQꢁPQVꢁTGURQPFꢁYKVJKPꢁꢃꢄꢁUGEQPFUꢅꢁVJGꢁYK\CTFꢁYKNNꢁDGꢁCWVQOCVKECNN[ꢁ
relaunched.
ATTENTION: if you use the reset button and relaunch the wizard, no data will
be erased but your TV connection settings will be lost, and you will have to set
them up again through the wizard.
NAVIGATING INSIDE THE WIZARD
• In the different screens of the wizard, use the up/down navigation buttons on the
remote control to highlight a parameter.
• Use the left/right buttons to select a different setting for a parameter.
• 9JGPꢁ[QWꢁJCXGꢁÒPKUJGFꢁCFLWUVKPIꢁ[QWTꢁUGVVKPIUꢅꢁWUGꢁVJGꢁPCXKICVKQPꢁDWVVQPUꢁVQꢁJKIJ-
light “Next” and press OKon the remote control to move on to the next screen.
• If you want to go back to a previous screen, select “Previous”.
CONFIGURING THE WIFI/ETHERNET CONNECTION
• At the end of the Installation Wizard, in the “Network” screen, you are invited to
EQPÒIWTGꢁ[QWTꢁ9K(Kꢇ'VJGTPGVꢁEQPPGEVKQPꢂꢁ
• Choose “WiFi”, “Ethernet Cable” (standard Ethernet cable not supplied) or
“None”, based on the way you want to connect to the Internet (or local network).
If you do not have access to the Internet, select “None”.
• See “Network” Settings.
TURNING THE ARCHOS ON/ OFF
• Press the Power button on the remote control to turn on your ARCHOS or put
it into standby mode.
• The green LED indicator, on the front of the device, lights up when the device is
on.The red LED lights up when the device is in standby mode.
TV+
MANUAL V1.0
STARTING UP > P. 10
In the event that your ARCHOS freezes or does not respond anymore, discon-
nect the power adapter, wait for 15 seconds and reconnect it. When the red
LED indicator stops blinking, press the Power button on the supplied remote
control to turn on your device.
USING THE ARCHOS INTERFACE
INTERFACE DESCRIPTION
Status Bar
• In the top right corner of the screen, the status
bar indicates the ‘network connection’ status
(WiFi or Ethernet), the volume level and the cur-
rent time of your device.
Tabs
• In the top left corner of the screen, the tabs area
shows other available applications and screens.They
vary, depending on where you are in the interface.
• When there is only one tab available, the Tab icon in
the top left corner is grayed out.
Contextual Menu
• In the lower right corner of the screen, the contextual menu area
shows the menu icons.The available options will vary, depending on
where you are in the interface.
• In the Home screen, choose the “Settings” menu item to access the
main settings of your ARCHOS.
• In the Home screen, the “Resume” menu item allows you to resume
VJGꢁNCUVꢊRNC[GFꢁOWUKEꢁQTꢁXKFGQꢁÒNGꢅꢁKHꢁKVꢁYCUꢁKPVGTTWRVGFꢁDGHQTGꢁVJGꢁGPFꢂꢁ
If the “Resume” menu icon does not appear, it means that no music
QTꢁXKFGQꢁÒNGꢁRNC[DCEMꢁECPꢁDGꢁTGUWOGFꢂ
Home Screen
• This is the main screen of your ARCHOS, showing
its main functions.
TV+
MANUAL V1.0
STARTING UP > P. 11
Main Button Actions:
• To open an application/screen via its icon or item, use the Navigation buttons to
highlight the icon/item and press OK.
• In the different applications, you can go back one level in the hierarchy by press-
ing the Exit button once.Wherever you are in the hierarchy, you can go back
directly to the Home screen by holding the Exit button.
• When several tabs are available, you can switch between them by pressing the
Tab button .
• To execute a menu icon’s function, press the Menu button M, select a menu item
with the navigation buttons, and press OK.
• While playing a video, song or photo slideshow, you can pause/resume it by
pressing OK.
Other Button Actions
• When watching a video or listening to music, you can hold the left/right
Navigation buttons to move the cursor in the progression bar to another
location in the video or song.
• To increase/decrease volume, use the Volume buttons (+/-).
• In the different browsers (File, Music,Video, Photo), you can hold the up/
FQYPꢁ0CXKICVKQPꢁDWVVQPUꢁVQꢁUETQNNꢁVJGꢁÒNGꢁNKUVꢁWRꢁCPFꢁFQYPꢂꢁ;QWꢁECPꢁCNUQꢁ
scroll faster by using the Accelerator buttons.
• In the Web browser and the PDF viewer, you can scroll up and down by
holding the up/down Navigation buttons.
PRODUCT CARE
Your ARCHOS is an electronic product that needs to be treated with care:
• Do not subject it to unnecessary shock or vibration.
•
Do not subject it to heat, keep it ventilated (especially when connected to a computer).
• Keep it away from water and excessively humid areas.
• -GGRꢁKVꢁCYC[ꢁHTQOꢁJKIJꢁGNGEVTQOCIPGVKEꢁÒGNFUꢂ
• Do not open it up.There are no user-serviceable parts inside. Opening will void
your warranty.
TV+
MANUAL V1.0
PLAYING VIDEO > P. 12
1. PLAYING VIDEO
In the Home screen, select the “Video” icon to enter the Video mode.
1.1 BROWSING THROUGH YOUR VIDEOS
• The “Video” browser allows you to navigate through the Video folder of the
ARCHOS’ hard drive.
• You can go back one level in the hierarchy by closing the current screen (Exit but-
ton ).Wherever you are in the hierarchy, you can go back directly to the Home
screen by pressing and holding down on the Exit button.
THE VIDEO BROWSER
• 6JGꢁÒTUVꢁUETGGPꢁQHꢁVJGꢁ8KFGQꢁOQFGꢁ
shows you all the videos and sub-
folders located in the Video folder.
• To play a video, highlight it, then
press OK.
• If a video is in a subfolder of the
Video folder, open the subfolder, and
you will see your video.
• ,QꢀWKHꢀ³9LGHR´ꢀEURZVHUꢃꢀHDFKꢀYLGHRꢀ¿OHꢀDSSHDUVꢀZLWKꢀDꢀWKXPEQDLOꢃꢀGLVSOD\HGꢀ
RQꢀWKHꢀOHIWꢀRIꢀWKHꢀ¿OH¶VꢀQDPHꢁꢀ
• 7RꢀGH¿QHꢀDꢀQHZꢀWKXPEQDLOꢀIRUꢀDꢀYLGHRꢀ¿OHꢃꢀRSHQꢀWKHꢀYLGHRꢃꢀVHOHFWꢀWKHꢀ³6HW´ꢀ
menu item, and choose “Thumbnail” (see: Video Playback Menu Items).
VIDEO BROWSER MENU ITEMS
“Info”
- FKURNC[UꢁCꢁOGUUCIGꢁDQZꢁYKVJꢁKPHQTOCVKQPꢁCDQWVꢁVJGꢁJKIJNKIJVGFꢁXKFGQꢁÒNGꢂ
TV+
MANUAL V1.0
PLAYING VIDEO > P. 13
“File Management”
- “RenamenꢀꢁCNNQYUꢁ[QWꢁVQꢁEJCPIGꢁVJGꢁPCOGꢁQHꢁVJGꢁJKIJNKIJVGFꢁXKFGQꢁÒNGꢁWUKPIꢁ
the remote control’s keyboard.
- “DeletenꢀꢁCNNQYUꢁ[QWꢁVQꢁFGNGVGꢁVJGꢁJKIJNKIJVGFꢁXKFGQꢁÒNGꢂꢁ#ꢁEQPÒTOCVKQPꢁ
screen will pop up.
“Bookmark”
- “Resume”: will resume playing the highlighted video from the bookmark.
- “ClearnꢀꢁYKNNꢁTGOQXGꢁVJGꢁDQQMOCTMꢁHTQOꢁVJGꢁJKIJNKIJVGFꢁXKFGQꢁÒNGꢂ
³%RRNPDUN´ꢀRQO\ꢀDSSHDUVꢀLQꢀWKHꢀPHQXꢀZKHQꢀDꢀERRNPDUNHGꢀYLGHRꢀ¿OHꢀLVꢀKLJK-
lighted.
“Settings”
- you can choose to display the Video Player settings screen (see: Video Player
Settings) or the “Sound” settings screen (see: “Sound” Settings).
1.2 VIDEO PLAYBACK
6QꢁRNC[ꢁCꢁXKFGQꢅꢁJKIJNKIJVꢁVJGꢁÒNGꢁCPFꢁpress OK.The menu overlay will disappear auto-
matically after a few seconds.
VIDEO PLAYBACK SCREEN
1.
Exit icon
2 .
XKFGQꢁÒNGꢁPCOG
3 .
4 .
Tab icon
volume level
5 .
6 .
video progression bar
menu items
TV+
MANUAL V1.0
PLAYING VIDEO > P. 14
VIDEO PLAYBACK BUTTON CONTROLS
- press once: stop the video and go back to the “Video” browser
hold: exit theVideo mode and go back directly to the Home screen.
-
pause/resume the video
accelerated fast forward
left/right: fast rewind/forward
accelerated fast rewind
display/hide the menu overlay
display available menu items
increase/decrease volume
Mute sound
VIDEO PLAYBACK MENU ITEMS
“Info”
- FKURNC[UꢁCꢁOGUUCIGꢁDQZꢁYKVJꢁKPHQTOCVKQPꢁCDQWVꢁVJGꢁEWTTGPVꢁXKFGQꢁÒNGꢂ
“Soundtrack” and/or “Subtitles”
- allows you to select a different audio track*.
- allows you to choose subtitles**.
ꢄꢀ2QO\ꢀLIꢀWKHꢀYLGHRꢀ¿OHꢀFRQWDLQVꢀVHYHUDOꢀDXGLRꢀWUDFNVꢁ
ꢄꢄꢀ2QO\ꢀLIꢀWKHꢀVXEWLWOHVꢀDUHꢀLQꢀDꢀVHSDUDWHꢀ¿OHꢁꢀ7KHꢀVXSSRUWHGꢀ¿OHꢀW\SHVꢀDUHꢅꢀꢁVUWꢃꢀ
.ssa, .sub (text based) and .smi.
“Format”
- allows you to change the way the image is displayed.
- “Auto”: adjusts the video size to best adapt to the TV.
- “Full ScreennꢀꢁGPNCTIGUꢁVJGꢁRKEVWTGꢁVQꢁÒNNꢁVJGꢁUETGGPꢂꢁ+PꢁQTFGTꢁVQꢁÒVꢁVJGꢁUETGGPꢅꢁ
your device might need to cut small parts of the image, most likely at the top
and bottom.
- “MaximizednꢀꢁGPNCTIGUꢁVJGꢁRKEVWTGꢁVQꢁÒNNꢁVJGꢁUETGGPꢅꢁEQPUKFGTKPIꢁVJGꢁKOCIGꢁKUꢁ
encoded in 2.35 format with black bands at the top and bottom.
- “Original”: displays the entire picture in its original format.
TV+
MANUAL V1.0
PLAYING VIDEO > P. 15
“Speed”
- will play the current video in slow motion or high speed.
- while paused in slow motion, you can advance frame by frame, using the right
arrow.
“Set”
- “Bookmark”: sets a bookmark at the current spot in the video. Only one
DQQMOCTMꢁRGTꢁÒNGꢁKUꢁCNNQYGFꢂꢁ;QWꢁECPꢁDQQMOCTMꢁWRꢁVQꢁꢉꢋꢁÒNGUꢂꢁ$QQMOCTMGFꢁ
videos will appear, in the “Video” browser, with a bookmark symbol and a
progression bar.
- to resume playing a video from a bookmark, go to the “Video” browser and
JKIJNKIJVꢁVJGꢁDQQMOCTMGFꢁXKFGQꢁÒNGꢂꢁ5GNGEVꢁVJGꢁmBookmark” menu item, then
choose “Resume” (“Clear” will remove the bookmark from the video).
- “ThumbnailnꢀꢁUCXGUꢁVJGꢁEWTTGPVꢁKOCIGꢁCUꢁCꢁPGYꢁVJWODPCKNꢁHQTꢁVJKUꢁÒNGꢂꢁ+PꢁVJGꢁ
“Video” browser, the video’s thumbnail will be replaced by the new one.
- “WallpapernꢀꢁVJGꢁEWTTGPVꢁKOCIGꢁYKNNꢁDGꢁFGÒPGFꢁCUꢁ[QWTꢁFGXKEGlUꢁDCEMITQWPFꢁ
image.
“Settings”
- you can choose to display the Video Player settings screen (see next section)
or the “Sound” settings screen (see: “Sound” Settings).
1.3 VIDEO PLAYER SETTINGS
• In the Video mode, you can access the Video Player settings screen by using the
“Settings” menu item .
• Use the left/right arrows to select a different setting for a parameter.
m2NC[/QFGnꢅꢁm4GRGCVꢁꢌꢁ5JWHÓGn
- the following table explains how the video player will work according to the set-
tings you chose in “PlayMode”AND “5HSHDWꢀ ꢀ6KXIÀH”.
TV+
MANUAL V1.0
PLAYING VIDEO > P. 16
“Repeat &
6KXIÀH´
“PlayMode”
What the video player does...
“Single”
“Normal”
“Repeat”
“Normal”
- RNC[UꢁVJGꢁEWTTGPVꢁXKFGQꢁÒNGꢁCPFꢁUVQRUꢂ
- RNC[UꢁVJGꢁEWTTGPVꢁXKFGQꢁÒNGꢁTGRGCVGFN[ꢂ
- RNC[UꢁCNNꢁVJGꢁXKFGQꢁÒNGUꢁQHꢁVJGꢁEWTTGPVꢁHQNFGTꢁ
one after the other, and then stops.
“Folder”
-
-
RNC[UꢁCNNꢁVJGꢁXKFGQꢁÒNGUꢁQHꢁVJGꢁEWTTGPVꢁHQNFGTꢁQPGꢁ
CHVGTꢁVJGꢁQVJGTꢂꢁ6JKUꢁYKNNꢁDGꢁTGRGCVGFꢁKPFGÒPKVGN[ꢂ
“Repeat”
“6KXIÀH”
plays all the videos of the current folder randomly.
“UPnP Thumbnails”
- here you can enable/disable the video thumbnails while browsing through your
PC’s shared videos (see: Playing your PC’s Shared Media Files). If you choose
“Disabled”, you will be able to browse through your PC’s shared videos faster.
1.4 RECORDING VIDEO
• Your ARCHOS gives you the possibility to record video from most
any standard video source.
• See: Recording Video Manually.
• You will also have the possibility to schedule TV recordings easily,
via the TV Program Guide (EPG).
• See: The TV program Guide.
1.5 PLAYING YOUR PC’S SHARED VIDEOS
• Using a WiFi or Ethernet connection, your ARCHOS gives you the
possibility to watch, directly on your TV, shared videos stored in
your PC’s Windows Media® Library.
• For this to work, you will need a WiFi or Ethernet connection and
9KPFQYUꢁ/GFKC‚ꢁ2NC[GTꢁꢃꢃꢁQTꢁJKIJGTꢍꢁKPUVCNNGFꢁQPꢁ[QWTꢁ2%ꢂꢁ
• The ARCHOS uses the UPnP (Universal Plug-and-play) standard to
play streamed videos from your PC’s Windows Media® Library.
• See: Playing your PC’s Shared Media Files.
ꢄꢀ7KHUHꢀDUHꢀRWKHUꢀSURGXFWVꢀRQꢀWKHꢀPDUNHWꢀWKDWꢀDOVRꢀFDQꢀVKDUHꢀPHGLDꢀ¿OHVꢀXVLQJꢀ
WKHꢀ83Q3ꢀVWDQGDUGꢁ
TV+
MANUAL V1.0
PLAYING MUSIC > P. 17
2 . PLAYING MUSIC
In the Home screen, select the “Music” icon to enter the Music mode.
2 .1 BROWSING THROUGH YOUR MUSIC FILES
• There are two types of views for you to browse through your songs: the Music
Library and the Music Browser.
• In both views, you can go back one level in the hierarchy by closing the current
screen (Exit button ).Wherever you are in the hierarchy, you can go back direct-
ly to the Home screen by pressing and holding down on the Exit button.
THE MUSIC LIBRARY
• The Music Library (default view)
shows your music sorted by cat-
egories (Artist, Album, Genre, etc.) if
[QWTꢁOWUKEꢁÒNGUꢁEQPVCKPꢁVJGUGꢁUQPIꢁ
information tags.
• When new music is copied to the
ARCHOS, the Music Library will be
updated automatically.
• +HꢁUQOGꢁQHꢁ[QWTꢁOWUKEꢁÒNGUꢁFQꢁPQVꢁ
contain information tags, they will
DGꢁENCUUKÒGFꢁCUꢁ(Unknown) in the
Music Library.
THE MUSIC BROWSER
• The music browser allows you to
navigate through the Music folder
of your device’s hard drive.
• To use it, select “Hard Drive” in the
initial Music Library view.
TV+
MANUAL V1.0
PLAYING MUSIC > P. 18
MUSIC LIBRARY AND MUSIC BROWSER MENU ITEMS*
“Info”
- FKURNC[UꢁCꢁOGUUCIGꢁDQZꢁYKVJꢁKPHQTOCVKQPꢁCDQWVꢁVJGꢁJKIJNKIJVGFꢁOWUKEꢁÒNGꢂ
“Show playlist”
- opens a playlist edition window on the right (see: Playlists).
“Bookmark”
- “Resume”: will resume playing the highlighted song from the bookmark.
- “ClearnꢀꢁYKNNꢁTGOQXGꢁVJGꢁDQQMOCTMꢁHTQOꢁVJGꢁJKIJNKIJVGFꢁOWUKEꢁÒNGꢂ
³%RRNPDUN´ꢀRQO\ꢀDSSHDUVꢀLQꢀWKHꢀPHQXꢀZKHQꢀDꢀERRNPDUNHGꢀPXVLFꢀ¿OHꢀLVꢀKLJK-
lighted.
“File Management”
- “RenamenꢀꢁCNNQYUꢁ[QWꢁVQꢁEJCPIGꢁVJGꢁPCOGꢁQHꢁVJGꢁJKIJNKIJVGFꢁOWUKEꢁÒNGꢁWUKPIꢁ
the remote control’s keyboard.
- “DeletenꢀꢁCNNQYUꢁ[QWꢁVQꢁFGNGVGꢁVJGꢁJKIJNKIJVGFꢁOWUKEꢁÒNGꢂꢁ#ꢁEQPÒTOCVKQPꢁ
screen will pop up.
“Settings”
- you can choose to display the Music Player settings screen (see: Music Player
Settings) or the “Sound” settings screen (see: “Sound” Settings).
* The available menu items will vary depending on the mode you chose (Music
/LEUDU\ꢀRUꢀ0XVLFꢀ%URZVHUꢆꢁ
2 .2 MUSIC PLAYBACK
• Use the up/down navigation buttons to browse through the list of audio tracks.
• 6QꢁRNC[ꢁCꢁUQPIꢅꢁJKIJNKIJVꢁVJGꢁEQTTGURQPFKPIꢁÒNGꢁCPFꢁpress OK.
TV+
MANUAL V1.0
PLAYING MUSIC > P. 19
MUSIC PLAYBACK SCREEN
1.
Exit icon
2 .
artist name, album
title, song title, play-
back status icon(s)
and track number
3 .
available tabs
4 .
5 .
volume level
previous track
6 .
7 .
8 .
next track
progression bar
menu items
MUSIC PLAYBACK BUTTON CONTROLS
- press once: stop the song and go back to the “Music” Library or browser
hold: exit the Music mode and go back directly to the Home screen.
-
pause/resume the song
accelerated fast forward
left:
- press once: back to the beginning of the song, or previous song (in the
ÒTUVꢁꢃꢄꢁUGEQPFUꢁQHꢁCꢁVTCEMꢈ
- hold: fast rewind
right:
- press once: next song
- hold: fast forward
accelerated fast rewind
tabs back to the Music Library or Music browser (depending on which mode
you launched the song from)
display available menu items
increase/decrease volume
Mute sound
TV+
MANUAL V1.0
PLAYING MUSIC > P. 20
MUSIC PLAYBACK MENU ITEMS
“Info”
- FKURNC[UꢁCꢁOGUUCIGꢁDQZꢁYKVJꢁKPHQTOCVKQPꢁCDQWVꢁVJGꢁEWTTGPVꢁOWUKEꢁÒNGꢂ
“ARCHOS home screen”
- allows you to go back to the Home screen, and browse your hard drive or
view your photos while listening to music.
“Set bookmark”
- UGVUꢁCꢁDQQMOCTMꢁCVꢁVJGꢁEWTTGPVꢁURQVꢁKPꢁVJGꢁUQPIꢂꢁ1PN[ꢁQPGꢁDQQMOCTMꢁRGTꢁÒNGꢁKUꢁ
CNNQYGFꢂꢁ;QWꢁECPꢁDQQMOCTMꢁWRꢁVQꢁꢉꢋꢁÒNGUꢂꢁ
-
to resume playing a song from a bookmark, go to the Music Library or the Music
$TQYUGTꢅꢁJKIJNKIJVꢁVJGꢁDQQMOCTMGFꢁOWUKEꢁÒNGꢂꢁ5GNGEVꢁVJGꢁmBookmark” menu
item, then choose “Resume” (“Clear” will remove the bookmark from the song).
“Set rating”
- CNNQYUꢁ[QWꢁVQꢁIKXGꢁCꢁTCVKPIꢁVQꢁVJGꢁEWTTGPVꢁUQPIꢁꢆꢃꢊꢎꢈꢁQTꢁVQꢁTGOQXGꢁVJGꢁTCVKPIꢁ
(none).
“Settings”
- you can choose to display the Music Player settings screen (see next section)
or the “Sound” settings screen (see: “Sound” Settings).
2 .3 MUSIC PLAYER SETTINGS
• In the Music mode, you can access the Music Player settings screen by using the
“Settings” menu item .
• Use the left/right arrows to select a different setting for a parameter.
TV+
MANUAL V1.0
PLAYING MUSIC > P. 21
m2NC[/QFGnꢅꢁm4GRGCVꢁꢌꢁ5JWHÓGn
- the following table explains how the audio player will work according to the set-
tings you chose in “PlayMode”AND “5HSHDWꢀ ꢀ6KXIÀH”.
- An icon shows the current modes in the Music playback screen.
“Repeat &
“PlayMode”
What the music player does...
6KXIÀH´
“Normal”
“Repeat”
“Normal”
“Single”
- plays the current song and stops.
- plays the current song repeatedly.
“Folder”
- plays all the songs of the current folder one
after the other, and then stops.
-
plays all the songs of the current folder one af-
VGTꢁVJGꢁQVJGTꢂꢁ6JKUꢁYKNNꢁDGꢁTGRGCVGFꢁKPFGÒPKVGN[ꢂ
“Repeat”
- plays the songs of the current folder ran-
domly.
“6KXIÀH”
“All”
“
”
- plays all the songs of your ARCHOS one
after the other, and then stops.
Normal
- plays all the songs of your ARCHOS one
CHVGTꢁVJGꢁQVJGTꢂꢁ6JKUꢁYKNNꢁDGꢁTGRGCVGFꢁKPFGÒ-
nitely.
“Repeat”
- plays all the songs of your ARCHOS ran-
domly.
“6KXIÀH”
- allows you to select a track to be played after the current one
KUꢁÒPKUJGFꢂ
“Queue”
- while a track is playing, switch to the browser window, se-
lect a track to highlight it, then press OK.This is your queued
track, which will be played after the current track.
- you can only queue one track at a time, and you need to se-
lect the song to queue before the end of the current track.
“Intro”
- RNC[UꢁVJGꢁÒTUVꢁHGYꢁUGEQPFUꢁQHꢁGCEJꢁVTCEMꢂꢁ;QWꢁECPꢁFGÒPGꢁVJGꢁ
length to play in “Intro duration”. Press OK during the intro
period to let the whole song play.
TV+
MANUAL V1.0
PLAYING MUSIC > P. 22
“Intro duration”
- FGÒPGUꢁHQTꢁJQYꢁNQPIꢁGCEJꢁVTCEMꢁYKNNꢁDGꢁRNC[GFꢁYJGPꢁmPlayMode” is set to “Intro”.
2 .4 PLAYLISTS
• A playlist is a list of audio tracks that the music player will automatically
play one after the other.
•
On your ARCHOS, you can play, create and edit as many playlists as you want.
• +PꢁVJGꢁ#4%*15ꢁ$TQYUGTꢅꢁRNC[NKUVUꢁCTGꢁVJGꢁÒNGUꢁYKVJꢁVJGꢁ icon.
Note: when you delete a playlist, you are only deleting the list and not the mu-
sic itself.
PLAYING A PLAYLIST
• In the Music Library, highlight the
“Playlist” line and press OK to dis-
play the available playlists.
• Highlight a playlist and press OK. A
panel showing the contents of the
playlist will open on the right.
• 1RGPꢁVJGꢁÒTUVꢁKVGOꢁKPꢁVJGꢁRNC[NKUVꢁVQꢁ
UVCTVꢁRNC[KPIꢁHTQOꢁVJGꢁÒTUVꢁVTCEMꢂ
PLAYLIST MENU ITEMS
6JGUGꢁOGPWꢁKVGOUꢁCRRGCTꢁYJGPꢁCꢁOWUKEꢁÒNGꢁKUꢁJKIJNKIJVGFꢁQPꢁVJGꢁNGHVꢁRCPGNꢀ
“Add to playlist”
- “6HOHFWHGꢀ¿OH”: will add the highlighted track at the end of the current playlist.
- “$OOꢀ¿OHV”: will add all the tracks (from the left panel) at the end of the current
playlist.
“Insert in playlist”
- “6HOHFWHGꢀ¿OH”: will insert the highlighted track before the selected item in
the current playlist.
- “$OOꢀ¿OHV”: will add all the tracks (from the left panel) before the selected
item in the current playlist.
TV+
MANUAL V1.0
PLAYING MUSIC > P. 23
These menu items appear when the focus is on the right panel (playlist editor):
“Track”
- “Remove track”: deletes the highlighted track from the playlist.
-
“Move”: allows you to change the position of the highlighted track within the
playlist. Highlight the track you want to move, select the “Track” menu item,
then choose “Move”. Use the up/down buttons to move the track and press OK.
“Playlist”
- “Clear”: clears the current playlist.
- “6KXIÀHnꢀꢁTCPFQON[ꢁUJWHÓGUꢁVJGꢁQTFGTꢁQHꢁVJGꢁUQPIUꢁKPꢁVJGꢁEWTTGPVꢁRNC[NKUVꢂ
“Save playlist”
- “Save”: saves the current playlist to the Playlists folder.
- “Save As”: same as “Save”, but it also allows you to give a personalized name
to the playlist using the remote control’s keyboard.
“Hide playlist”
- closes the playlist editor.
“Settings”
- you can choose to display the Music Player settings screen (see Music Player
Settings) or the “Sound” settings screen (see: “Sound” Settings).
CREATING A NEW PLAYLIST
ꢃꢂ While you are in the Music browser, select the “Show playlist” menu item. A
playlist panel will open on the right. By default, the new playlist contains the
same songs as the last opened playlist.You can now start modifying the playlist.
2. In the left panel, locate the songs you would like to add to your playlist. Highlight
a song and press OK to add it to the playlist. Repeat this operation with all the
tracks you want.
To add all the songs of a folder to a playlist: open the folder in the left panel
DQGꢀKLJKOLJKWꢀWKHꢀ¿UVWꢀVRQJꢁꢀ7KHQꢀXVHꢀWKHꢀ³$GGꢀWRꢀSOD\OLVW´ꢀRUꢀ³,QVHUWꢀLQꢀSOD\O-
LVW´ꢀPHQXꢀLWHPꢀDQGꢀFKRRVHꢀ³$OOꢀ¿OHV´ꢁ
3. 9JGPꢁ[QWꢁCTGꢁUCVKUÒGFꢁYKVJꢁ[QWTꢁPGYꢁRNC[NKUVꢅꢁVCDꢁVQꢁVJGꢁRNC[NKUVꢁRCPGꢅꢁUGNGEVꢁVJGꢁ
“Save playlist” menu item, and then choose “Save as”.
4. Enter the name of your new playlist using the remote control’s keyboard and
press “OK”.
8VHꢀWKHꢀWDEVꢀWRꢀMXPSꢀEDFNꢀDQGꢀIRUWKꢀEHWZHHQꢀWKHꢀOHIWꢀDQGꢀULJKWꢀSDQHOVꢁ
TV+
MANUAL V1.0
PLAYING MUSIC > P. 24
EDITING A PLAYLIST
To edit an existing playlist:
ꢃꢂ In the Music Library, highlight the “Playlist” line and press OK to display the avail-
able playlists.
2. Highlight the playlist you want to modify and press OK. A panel showing the con-
tents of the playlist will open on the right.
3. ;QWꢁECPꢁPQYꢁCFFꢅꢁUJWHÓGꢅꢁOQXGꢁQTꢁTGOQXGꢁVTCEMUꢁYKVJKPꢁVJGꢁRNC[NKUVꢅꢁWUKPIꢁVJGꢁ
appropriate menu items.The available menu items will vary according to which
panel you selected (see: Playlist Menu Items).
4. After you have made the changes you want, select the “Save playlist” menu item
and choose “Save” to save the playlist. If you wish to give it a different name,
choose “Save As”.
ADDING SONGS TO A PLAYLIST WHILE LISTENING TO MUSIC
ꢃꢂ While playing a song, use the tab button to go back to the Music Library or Music
Browser, and select the “Show playlist” menu item.
2. 6JGꢁUETGGPꢁYKNNꢁVJGPꢁJCXGꢁVYQꢁRCPGNUꢀꢁVJGꢁOWUKEꢁÒNGUꢁQPꢁVJGꢁNGHVꢁCPFꢁVJGꢁNCUVꢊ
opened playlist on the right.
3. While listening to your song, you can edit the last-opened playlist.
4. Close the playlist editor (Exit button ) to return to the playback screen.
Please note: this can only be done if you have entered the “Music” folder via
the “Music” icon in the Home screen and not via the “Files” icon.
2 .5 RECORDING ANALOGUE AUDIO
• Your ARCHOS Gives you the possibility to record audio from most
any standard line level analogue audio source.
• See: Recording Audio Manually.
2 .6 PLAYING YOUR PC’S SHARED MUSIC
• Using a WiFi or Ethernet connection, your ARCHOS gives you the
possibility to play, directly on your TV, shared music stored in your
PC’s Windows Media® Library.
• For this to work, you will need a WiFi or Ethernet connection and
9KPFQYUꢁ/GFKC‚ꢁ2NC[GTꢁꢃꢃꢁQTꢁJKIJGTꢍꢁKPUVCNNGFꢁQPꢁ[QWTꢁ2%ꢂꢁ
TV+
MANUAL V1.0
PLAYING MUSIC > P. 25
• The ARCHOS uses the UPnP (Universal Plug-and-play) standard to play streamed
music from your PC’s Windows Media® Library.
• See: Playing your PC’s Shared Media Files.
ꢄꢀ7KHUHꢀDUHꢀRWKHUꢀSURGXFWVꢀRQꢀWKHꢀPDUNHWꢀWKDWꢀDOVRꢀFDQꢀVKDUHꢀPHGLDꢀ¿OHVꢀXVLQJꢀ
WKHꢀ83Q3ꢀVWDQGDUGꢁ
TV+
MANUAL V1.0
VIEWING PHOTOS > P. 26
3 .VIEWING PHOTOS
In the Home screen, select the “Photo” icon to enter the Photo viewer.
3 .1 BROWSING THROUGH YOUR PHOTOS
• The “Photo” browser allows you to navigate through the Pictures folder of the
ARCHOS’ hard drive.
• You can go back one level in the hierarchy by closing the current screen (Exit but-
ton ).Wherever you are in the hierarchy, you can go back directly to the Home
screen by pressing and holding down on the Exit button.
THE PHOTO BROWSER
• 6JGꢁÒTUVꢁUETGGPꢁQHꢁVJGꢁ2JQVQꢁOQFGꢁ
shows all the photos and subfolders
located in the Pictures folder.
• To view a photo, highlight its
thumbnail, then press OK. If a photo
is in a subfolder of the Pictures
folder, open the subfolder, and you
will see your photo.
• The Photo Browser also allows you
to view your pictures, sorted by
date.
In the “Photo” browser each photo is displayed with a thumbnail.
PHOTO BROWSER MENU ITEMS*
“Info”
- displays a message box with information about the highlighted picture.
“Delete”
- CNNQYUꢁ[QWꢁVQꢁFGNGVGꢁVJGꢁJKIJNKIJVGFꢁRKEVWTGꢂꢁ#ꢁEQPÒTOCVKQPꢁUETGGPꢁYKNNꢁRQRꢁ
up.
TV+
MANUAL V1.0
VIEWING PHOTOS > P. 27
“Start slideshow”
- starts a slideshow from the highlighted image.
- the “Pause slideshow” menu item will appear, allowing you to pause the
slideshow.
“Settings”
- will display the Photo viewer settings screen (see Photo Viewer Settings).
* The available menu items will vary depending on where you are in the
³3KRWR´ꢀ%URZVHUꢁ
3 .2 PHOTO VIEWER
To view a picture, highlight the corresponding thumbnail and press OK. The menu
overlay will disappear automatically after a few seconds.
PHOTO VIEWER SCREEN
PHOTO VIEWER BUTTON CONTROLS
- press once: close the photo viewer and go back to the “Photo” browser
-
hold: exit the Photo mode and go back directly to the Home screen.
start/pause a slideshow
zoom in
left/right: previous/next picture
FQYPꢇWRꢀꢁTQVCVGꢁꢏꢄ„ꢁENQEMYKUGꢇEQWPVGTENQEMYKUGꢁ
TV+
MANUAL V1.0
VIEWING PHOTOS > P. 28
zoom out
display/hide the menu overlay
display available menu items
increase/decrease volume
Mute sound
PHOTO VIEWER MENU ITEMS
“Info”
- displays a message box with information about the current picture.
“Rotate”
- choose “LeftnꢁVQꢁTQVCVGꢁVJGꢁRKEVWTGꢁꢏꢄ„ꢁEQWPVGTENQEMYKUGꢂ
- choose “RightnꢁVQꢁTQVCVGꢁVJGꢁRKEVWTGꢁꢏꢄ„ꢁENQEMYKUGꢂ
“Start slideshow”
- starts a slideshow from the current image.
- the “Pause slideshow” menu item will appear, allowing you to pause the
slideshow.
“Set as wallpaper”
- FGÒPGUꢁVJGꢁEWTTGPVꢁRKEVWTGꢁCUꢁ[QWTꢁ#4%*15lꢁDCEMITQWPFꢁKOCIGꢂ
“Settings”
- will display the Photo viewer settings screen (see next section).
“Zoom”
- use the slider to magnify/demagnify the current picture.
TV+
MANUAL V1.0
VIEWING PHOTOS > P. 29
3 .3 PHOTO VIEWER SETTINGS
• In the Photo mode, you can access
the Photo viewer settings screen via
the “Settings” menu item.
• Use the left/right arrows to select a
different setting for a parameter.
“Picture Pause”
- FGÒPGUꢁVJGꢁVKOGꢁVJCVꢁGCEJꢁRKEVWTGꢁYKNNꢁDGꢁFKURNC[GFꢁFWTKPIꢁCꢁUNKFGUJQYꢂ
“Transition”
- FGÒPGUꢁVJGꢁVTCPUKVKQPꢁGHHGEVꢁVQꢁDGꢁWUGFꢁDGVYGGPꢁVYQꢁRKEVWTGUꢂꢁ6JGTGꢁCTGꢁUGXGTCNꢁ
cool effects that you can choose from.
“Sequence”
- CNNQYUꢁ[QWꢁVQꢁGPCDNGꢇFKUCDNGꢁVJGꢁUJWHÓGꢁOQFGꢂꢁ+HꢁVJKUꢁRCTCOGVGTꢁKUꢁUGVꢁVQꢁ
“6KXIÀHnꢅꢁ[QWTꢁRKEVWTGUꢁYKNNꢁDGꢁFKURNC[GFꢁTCPFQON[ꢂꢁ6QꢁFKUCDNGꢁVJGꢁUJWHÓGꢁOQFGꢅꢁ
select “Normal”.
“Format”
- allows you to change the way the picture is displayed.
- “Original”: displays the entire picture in its original format.
- “Full ScreennꢀꢁGPNCTIGUꢁVJGꢁRKEVWTGꢁVQꢁÒNNꢁVJGꢁUETGGPꢂꢁ+PꢁQTFGTꢁVQꢁÒVꢁVJGꢁUETGGPꢁQHꢁ
your TV, your device might need to cut small parts of the image, most likely at
the top and bottom.
m#PVKꢊÓKEMGTn
- if you have a regular tube type television (CRT), you can set this to “On” if you
ÒPFꢁVJCVꢁUQOGꢁRJQVQUꢁÓKEMGTꢂꢁ
3 .4 PLAYING A SLIDESHOW
• 6QꢁXKGYꢁCꢁUNKFGUJQYꢅꢁJKIJNKIJVꢁCꢁRKEVWTGꢁÒNGꢁKPꢁVJGꢁmPhoto” browser or while view-
ing a photo, and choose the “Start slideshow” menu item.
TV+
MANUAL V1.0
VIEWING PHOTOS > P. 30
• While a slideshow is playing, you can pause it at any time by selecting the “Pause
slideshow” menu item.
• ;QWꢁECPꢁFGÒPGꢁVJGꢁVKOGꢁVJCVꢁGCEJꢁRKEVWTGꢁKUꢁFKURNC[GFꢁCPFꢁVJGꢁVTCPUKVKQPꢁGHHGEVUꢁKPꢁ
the “Photo” settings (see: Photo Viewer Settings).
3 .5 VIEWING PHOTOS WHILE LISTENING TO MUSIC
You can view photos and play slideshows while listening to music:
• Choose the “ARCHOS home screen” menu item while playing a song.
• In the Home screen, select the “Photo” icon to enter the Photo mode.
• Browse through your photos (see: Browsing Through your Photos) or start a slide-
show as normal (see: Playing a Slideshow).
• To go back to the Music playback screen, go to the Home screen and select the
“Music” icon.
3 .6 PLAYING YOUR PC’S SHARED PHOTOS
• Using a WiFi or Ethernet connection, your ARCHOS gives you the
possibility to view, directly on your TV, shared photos stored in your
PC’s Windows Media® Library.
• For this to work, you will need a WiFi or Ethernet connection and
9KPFQYUꢁ/GFKC‚ꢁ2NC[GTꢁꢃꢃꢁQTꢁJKIJGTꢍꢁKPUVCNNGFꢁQPꢁ[QWTꢁ2%ꢂꢁ
• The ARCHOS uses the UPnP (Universal Plug-and-play) standard to
view streamed photos from your PC’s Windows Media® Library.
• See: Playing your PC’s Shared Media Files.
ꢄꢀ7KHUHꢀDUHꢀRWKHUꢀSURGXFWVꢀRQꢀWKHꢀPDUNHWꢀWKDWꢀDOVRꢀFDQꢀVKDUHꢀPHGLDꢀ¿OHVꢀXVLQJꢀ
WKHꢀ83Q3ꢀVWDQGDUGꢁ
TV+
MANUAL V1.0
USING THE FILE BROWSER > P. 31
4 .USING THE FILE BROWSER
6JGꢁ#4%*15ꢁ(KNGꢁ$TQYUGTꢁIKXGUꢁ[QWꢁVJGꢁRQUUKDKNKV[ꢁVQꢁPCXKICVGꢁVJGꢁÒNGꢁ
system of your ARCHOS’ hard drive. In the Home screen, select the
“Files” icon to enter the File Browser.
You will see two panels:
• The one on the left is the panel that
you usually use to navigate through
your device’s hard drive.
• The panel on the right is the one
[QWꢁYKNNꢁWUGꢁVQꢁEQR[ꢁQTꢁOQXGꢁÒNGUꢁ
and folders (see: Copying and
Moving Files and Folders).
About your ARCHOS’ hard drive:
DO NOT delete or rename the original folders: “Music”, “Pictures”, “Video”,
“Playlists”, etc. The icons on the Home screen (“Video, “Music”, “Photo”...)
lead directly to these folders and they may no longer work correctly if the fold-
ers are deleted or renamed.
4 .1 NAVIGATION
BUTTON CONTROLS
- press once: go back one level in the hierarchy
-
hold: exit the File Browser and go back directly to the Home screen.
QRGPꢁCꢁÒNGꢁQTꢁHQNFGT
UETQNNꢁWRꢁVJGꢁÒNGꢁNKUVꢁHCUVGTꢁ
left: go back up one level in the folder hierarchy
WRꢇFQYPꢀꢁUETQNNꢁVJGꢁÒNGꢁNKUVꢁWRꢁCPFꢁFQYP
UETQNNꢁFQYPꢁVJGꢁÒNGꢁNKUVꢁHCUVGTꢁ
jump between the left and right panels.
TV+
MANUAL V1.0
USING THE FILE BROWSER > P. 32
display available menu items
increase/decrease volume
Mute sound
BROWSER MENU ITEMS
Note that some of the above menu items may not appear if they are not avail-
DEOHꢀIRUꢀWKHꢀKLJKOLJKWHGꢀ¿OHꢀRUꢀIROGHUꢁ
“Info”
- FKURNC[UꢁCꢁOGUUCIGꢁDQZꢁYKVJꢁKPHQTOCVKQPꢁCDQWVꢁVJGꢁJKIJNKIJVGFꢁÒNGꢂ
“Create folder”
- creates a folder at the current location.
- you will have to enter the folder’s name using the remote control’s keyboard.
“File Management”
- “RenamenꢀꢁCNNQYUꢁ[QWꢁVQꢁEJCPIGꢁVJGꢁPCOGꢁQHꢁVJGꢁJKIJNKIJVGFꢁÒNGꢁQTꢁHQNFGTꢁWU-
ing the remote control’s keyboard.
- “DeletenꢀꢁCNNQYUꢁ[QWꢁVQꢁFGNGVGꢁVJGꢁJKIJNKIJVGFꢁÒNGꢁQTꢁHQNFGTꢁꢆCPFꢁCNNꢁKVUꢁEQP-
VGPVUꢈꢂꢁ#ꢁEQPÒTOCVKQPꢁUETGGPꢁYKNNꢁRQRꢁWRꢂ
“Copy”
- “CopynꢀꢁCNNQYUꢁ[QWꢁVQꢁEQR[ꢁVJGꢁJKIJNKIJVGFꢁÒNGꢁQTꢁHQNFGTꢁVQꢁVJGꢁNQECVKQPꢁFG-
ÒPGFꢁKPꢁVJGꢁQVJGTꢁDTQYUGTꢁRCPGNꢂ
- “&RS\ꢀDOOꢀ¿OHVnꢀꢁCNNQYUꢁ[QWꢁVQꢁEQR[ꢁCNNꢁVJGꢁÒNGUꢁQHꢁVJGꢁEWTTGPVꢁHQNFGTꢁVQꢁVJGꢁ
NQECVKQPꢁFGÒPGFꢁKPꢁVJGꢁQVJGTꢁDTQYUGTꢁRCPGNꢂ
- “MovenꢀꢁCNNQYUꢁ[QWꢁVQꢁOQXGꢁVJGꢁJKIJNKIJVGFꢁÒNGꢁQTꢁHQNFGTꢁVQꢁVJGꢁNQECVKQPꢁFG-
ÒPGFꢁKPꢁVJGꢁQVJGTꢁDTQYUGTꢁRCPGNꢂ
COPYING AND MOVING FILES AND FOLDERS
• +PꢁVJGꢁNGHVꢁRCPGNꢅꢁJKIJNKIJVꢁVJGꢁÒNGꢇHQNFGTꢁVJCVꢁ[QWꢁYCPVꢁVQꢁEQR[ꢁQTꢁOQXGꢂ
•
+PꢁVJGꢁTKIJVꢁRCPGNꢅꢁPCXKICVGꢁVQꢁVJGꢁNQECVKQPꢁYJGTGꢁ[QWꢁYKUJꢁVQꢁEQR[ꢁVJGꢁÒNGꢇHQNFGTꢁVQꢂ
• Go back to the left panel, select the “Copy” menu item and then choose “Copy”,
“&RS\ꢀDOOꢀ¿OHV” or “Move”, depending on the action that you want to carry out.
TV+
MANUAL V1.0
USING THE FILE BROWSER > P. 33
4 .2 USING THE FILE BROWSER WHILE LISTENING TO MUSIC
;QWꢁECPꢁDTQYUGꢁ[QWTꢁÒNGUꢁYJKNGꢁNKUVGPKPIꢁVQꢁOWUKEꢀ
• Choose the “ARCHOS home screen” menu item while playing a song.
• In the Home screen, select the “Files” icon to enter the File Browser and start
DTQYUKPIꢁVJTQWIJꢁ[QWTꢁÒNGUꢂ
• To go back to the Music playback screen, go to the Home screen and select the
“Music” icon.
4 .3 USING THE PDF READER
• Your ARCHOS features a PDF reader with hyperlink support.
• +PꢁVJGꢁ$TQYUGTꢅꢁ2&(ꢁÒNGUꢁCTGꢁFKURNC[GFꢁYKVJꢁVJGꢁ
icon.
• To view a PDF document, highlight the PDF document in the File Browser and
press OK.
ATTENTION: The ARCHOS PDF reader may not implement all PDF features.
)RUꢀH[DPSOHꢃꢀ\RXꢀZLOOꢀQRWꢀEHꢀDEOHꢀWRꢀRSHQꢀSDVVZRUGꢀSURWHFWHGꢀ3')ꢀ¿OHVꢁ
PDF BUTTON CONTROLS
- ꢃstꢁRTGUUꢀꢁÒVꢁVQꢁYKFVJꢁꢆKHꢁ\QQOGFꢈ
- 2nd press: exit PDF reader
follow a highlighted link (surrounded by a red outline)
previous page
navigate within the current page
next page
-
display available menu items
-
-
TV+
MANUAL V1.0
USING THE FILE BROWSER > P. 34
FOLLOWING HYPERLINKS
• Some PDF documents have hyperlinks (for instance, a table of contents, links to
an external website, etc.).
• Links are surrounded by a blue outline. A highlighted link (active link) is surround-
ed by a red outline.
• If you want to go back to the previous page (where you ‘clicked’ the link), select
the “Link back” menu item.
1RWHꢀWKDWꢀK\SHUOLQNVꢀUHIHUULQJꢀWRꢀDQꢀH[WHUQDOꢀGRFXPHQWꢀRUꢀWRꢀDꢀ85/ꢀPD\ꢀQRWꢀ
work.
PDF READER MENU ITEMS
“Hide text overlay”
- will hide all overlaid graphics (status bar, menu items, etc.) to only show the PDF
document.
“Zoom”
- allows you to adjust the zoom level.
“Previous page”
- goes to the previous page in the document.
“Next Page”
- goes to the next page in the document.
“Link back”
- will take you back to the page that you came from.
- only appears when you have previously followed a link.
“Go to page...”
- CNNQYUꢁ[QWꢁVQꢁUGNGEVꢁCꢁURGEKÒEꢁRCIGꢂ
- use the left/right buttons to select a page number.
- press “Ok” to go to this page.
TV+
MANUAL V1.0
USING THE WIFI FEATURES > P. 35
5 . USING THE WIFI FEATURES
When connected to a WiFi or Ethernet network, your ARCHOS gives you
the possibility to:
• rent or purchase online videos/music via the ARCHOS Content Portal.
See: The ARCHOS Content Portal.
• browse the web with the optional Web Browser plug-in, available at
• RNC[ꢁUJCTGFꢁOGFKCꢁÒNGUꢁUVQTGFꢁQPꢁQVJGTꢁEQORWVGTUꢁKPꢁ[QWTꢁPGVYQTMꢂꢁ
See: Playing your PC’s Shared Media Files.
• 7KHꢀ¿UVWꢀWLPHꢀ\RXꢀWXUQHGꢀRQꢀ\RXUꢀ$5&+26ꢃꢀWKHꢀLQVWDOODWLRQꢀZL]DUGꢀKHOSHGꢀ
\RXꢀFRQ¿JXUHꢀWKHꢀ:L)LꢀDQGꢀ(WKHUQHWꢀFRQQHFWLRQꢁꢀ
• Every time you restart your ARCHOS, your device will automatically con-
QHFWꢀWRꢀWKHꢀODVWꢀFRQ¿JXUHGꢀQHWZRUNꢁ
• ,Iꢀ\RXꢀZDQWꢀWRꢀFKDQJHꢀ\RXUꢀ1HWZRUNꢀFRQ¿JXUDWLRQꢃꢀVHOHFWꢀWKHꢀ³6HWWLQJV´ꢀ
menu item from the Home screen, and choose “Network”. See “Network”
Settings.
5 .1 BROWSING THE WEB
In order to browse the web, you will need the Web Browser plug-in, avail-
for your ARCHOS, you will have the possibility to browse websites*, use
web-based e-mailing, download content, etc.
*supports Flash® content and Javascript. Java virtual machine not supported.
LAUNCHING THE WEB BROWSER
From the Home screen, select the “Web” icon.
• If you are already connected to a network, the Web browser will simply open and
you can start browsing the Web.
• If WiFi / Ethernet is not enabled or if you are not connected to a network, the
device will scan for available networks and connect to a known network or display
the list of available networks so that you can connect to one of them.
• Please note: not all wireless / Ethernet networks offer access to the Internet.
Some WiFi or Ethernet networks only link several computers together, without
any Internet connection.
TV+
MANUAL V1.0
USING THE WIFI FEATURES > P. 36
If the time and date are not correctly set, you might not be able to access cer-
tain web pages (See: “Clock” settings). If you choose to set the clock automat-
ically when the ARCHOS connects to a WiFi / Ethernet network, you will need
to select your Country and City/Zone (see: “Language and Region” Settings).
USING THE WEB BROWSER
• You can use the Web browser to read your Web-based e-mail, view Web sites, and
download documents from the Internet.
• The menu overlay will disappear after a few seconds.
• The Web browser features ‘tabbed browsing’.You can have several pages opened
at the same time.They will appear in the tabs area, in the upper left corner of the
screen.When several pages are open, simply select a tab (using the Tab button) to
access the page that you want. See next section.
WEB BROWSER BUTTON CONTROLS
See: The Remote Control.
BROWSER MENU ITEMS
“Reload” / “Stop”
- will stop loading the web page, if it is currently loading.
- will refresh the current web page, if it has stopped loading.
“Navigation”
- “Forward”: will go to the next page that you browsed.
- “Back”: will go back to the previous page that you browsed.
“Zoom”
- changes the way the web page is displayed. Select a zoom mode.
TV+
MANUAL V1.0
USING THE WIFI FEATURES > P. 37
“Go to”
- “Enter URL...”: allows you to enter the address of a Web site you’d like to visit.
Enter the address using the remote control’s keyboard. Press “OK” to open the
website in the current window, or select the menu item “Open in new tab” to
open it in a new window.
- “Search...nꢀꢁCNNQYUꢁ[QWꢁVQꢁUGCTEJꢁCPꢁCFFTGUUꢁKPꢁQPGꢁQHꢁVJGꢁEQPÒIWTGFꢁUGCTEJꢁGP-
gines. Enter the key words using the remote control’s keyboard. Press “OK” to
open the results in the current window, or select the menu item “Open in new
tab” to open them in a new window.
“Favorites”
- will open the “Favorites” manager. Here you can add favorites, rename or delete
them. Select a favorite and use the “Open in new tab” menu item to open the
corresponding web page in a new window.
“Settings”
- will open the “Web Browser” settings screen. Here you can decide whether to
CEEGRVꢇKIPQTGꢁRQRWRꢁYKPFQYUꢅꢁGPCDNGꢇFKUCDNGꢁÓCUJꢁEQPVGPVꢅꢁFGNGVGꢁ[QWTꢁ+PVGTPGVꢁ
history and cookies, etc.
Please note that some Web features requiring special plug-in software or
$FWLYHꢀ;ꢀFRQWUROVꢀPD\ꢀQRWꢀZRUNꢀLQꢀWKLVꢀVSHFLDOꢀYHUVLRQꢀRIꢀWKHꢀ:HEꢀ%URZVHUꢁ
5 .2 PLAYING YOUR PC’S SHARED MEDIA FILES
Streaming one of your PC’s shared videos and displaying it on your TV
• When connected to your home WiFi / Ethernet network, your ARCHOS gives you
VJGꢁRQUUKDKNKV[ꢁVQꢁYCVEJꢅꢁFKTGEVN[ꢁQPꢁ[QWTꢁ68ꢅꢁUJCTGFꢁOGFKCꢁÒNGUꢁꢆXKFGQUꢅꢁOWUKEꢁQTꢁ
photos) stored in your PC’s Windows Media® Library.
TV+
MANUAL V1.0
USING THE WIFI FEATURES > P. 38
• For this to work, you will need a WiFi /Ethernet connection and Windows Media®
2NC[GTꢁꢃꢃꢁQTꢁJKIJGTꢁKPUVCNNGFꢁQPꢁ[QWTꢁ2%ꢍꢂꢁ
• This is especially useful when you have a large library of music and video and you
ECPPQVꢁÒVꢁKVꢁCNNꢁQPVQꢁVJGꢁKPVGTPCNꢁJCTFꢁFTKXGꢁQHꢁVJGꢁ#4%*15ꢂ
• The ARCHOS uses the UPnP (Universal Plug-and-play) standard to play streamed
OGFKCꢁÒNGUꢁHTQOꢁ[QWTꢁ2%lUꢁ9KPFQYUꢁ/GFKC‚ꢁ.KDTCT[ꢂ
* If you cannot install Windows Media® Player 11 or higher, it is possible to ac-
FHVVꢀDQGꢀVWUHDPꢀ\RXUꢀ3&¶Vꢀ¿OHVꢀIURPꢀWKHꢀ$5&+26ꢀ)LOHꢀ%URZVHUꢁꢀ6HHꢀBrowsing
Other Computers on the Network.
SETTING WINDOWS MEDIA® PLAYER’S SHARING OPTIONS
ꢃꢂ Connect the ARCHOS to your WiFi / Ethernet net-
work. See “Network” Settings.
2. Connect your PC to the same WiFi / Ethernet net-
YQTMꢁCPFꢁUVCTVꢁ9KPFQYUꢁ/GFKC‚ꢁ2NC[GTꢅꢁXGTUKQPꢁꢃꢃꢁ
or higher.
3. Click on the Library tab, and select Media shar-
ing...
4. Check the box Share my media to, and click on
OK.The ARCHOS’ icon should appear in the win-
dow, with a warning symbol next to it*.
ꢄꢀ$77(17,21ꢅꢀWKHꢀ¿UVWꢀWLPHꢀ\RXꢀVHWꢀ\RXUꢀVKDU-
ing options, it might take a couple of minutes
for your PC to display the ARCHOS’ icon.
5. Select the ARCHOS’ icon and click on the Allow button.
6. To modify your sharing settings, click on Settings.You can, for example, enter a
PCOGꢁHQTꢁ[QWTꢁUJCTGFꢁOGFKCꢁÒNGUꢂꢁ;QWꢁYKNNꢁVJGPꢁUGGꢁVJKUꢁPCOGꢁQPꢁ[QWTꢁ#4%*15ꢂꢁ
Click on OKꢁVQꢁUCXGꢁVJGꢁOQFKÒECVKQPUꢂ
7. Click on OK to close the Media Sharing window.
8. You can now close Windows Media® Player, and start viewing your PC’s shared
OGFKCꢁÒNGUꢁFKTGEVN[ꢁQPꢁ[QWTꢁ#4%*15ꢁꢆUGGꢁPGZVꢁUGEVKQPꢈꢂ
TV+
MANUAL V1.0
USING THE WIFI FEATURES > P. 39
PLAYING YOUR SHARED MEDIA FILES ON THE ARCHOS
Your PC needs to be connected to the same WiFi / Ethernet network as the one the
#4%*15ꢁYKNNꢁEQPPGEVꢁVQꢂꢁ;QWꢁCNUQꢁPGGFꢁVQꢁJCXGꢁEQPÒIWTGFꢁ9KPFQYUꢁ/GFKC‚ꢁ2NC[GTlUꢁ
sharing options (see the previous section).
ꢃꢂ On your ARCHOS, enter the Video, Music or Photo mode.
2. ;QWꢁYKNNꢁPQVKEGꢁVJCVꢁVJGꢁÒTUVꢁKVGOꢁKPꢁVJGꢁNKUVꢁKUꢁVJGꢁUJCTGFꢁOGFKCꢁÒNGUꢀꢁmNetwork
‘UPnP’”. Open this item to start scanning for devices and computers sharing
VJGKTꢁOGFKCꢁÒNGUꢁQPꢁVJGꢁ9K(Kꢁꢇꢁ'VJGTPGVꢁPGVYQTMꢂꢁ
3. +Hꢁ[QWꢁGPVGTGFꢁCꢁPCOGꢁHQTꢁ[QWTꢁUJCTGFꢁOGFKCꢁÒNGUꢁKPꢁ9KPFQYUꢁ/GFKC‚ꢁ2NC[GTꢅꢁKVꢁ
should appear. Open it, and you will see all your shared videos, songs or photos.
• If you are in the Video mode,
you will then have access to all
the videos stored in your PC’s
Windows Media® Library.
• In the same way, the Music and
Photo modes will allow you
to access all the music/photos
stored in your PC’s Windows
Media® Library.
1RWHꢅꢀ<RXꢀPD\ꢀKDYHꢀVRPHꢀYLGHRꢀ¿OHVꢀRIꢀYHU\ꢀKLJKꢀTXDOLW\ꢀDQGꢀWKHVHꢀUHTXLUHꢀ
that the WiFi connection transfers data at a high speed. If your ARCHOS is far
away from your WiFi box, it may happen that the connection speed is reduced
WKXVꢀQRWꢀDOORZLQJꢀVRPHꢀYLGHRꢀ¿OHVꢀWRꢀVWUHDPꢀIURPꢀ\RXUꢀ3&ꢀWRꢀWKHꢀ$5&+26ꢀDQGꢀ
the television.
5 .3 THE ARCHOS CONTENT PORTAL
• The ARCHOS Content Portal is an online store that offers several
video and music partners.
• This portal gives you access to video and music content that is ei-
ther free, for rent, or for purchase.
ꢃꢂ In order to activate the ARCHOS Content portal, you will need to register your
ARCHOS product online on the ARCHOS web site (www.archos.com/register).
2. /CMGꢁUWTGꢁ[QWꢁJCXGꢁEQPÒIWTGFꢁ[QWTꢁ#4%*15ꢁQPꢁCꢁ9K(Kꢁꢇꢁ'VJGTPGVꢁPGVYQTMꢁꢆUGGꢀꢁ
“Network” Settings).
TV+
MANUAL V1.0
USING THE WIFI FEATURES > P. 40
3. Select the ARCHOS “Content Portal” icon to view available online media stores
and purchase videos or songs.
Depending on your connection speed, you will have the possibility to start
playing the video/song you purchased or rented while it’s being downloaded
(streaming content websites start to play instantly). The videos/songs you get
from the ARCHOS Content Portal are saved in the “Video”/“Music” folders.
TV+
MANUAL V1.0
TRANSFERRING FILES > P. 41
6 .TRANSFERRING FILES
6 .1 USB HOST CONNECTION
• 7KHꢀ$5&+26ꢀDOORZVꢀ\RXꢀWRꢀFRQQHFWꢀDꢀ86%ꢀH[WHUQDOꢀGHYLFHꢃꢀVRꢀWKDWꢀ\RXꢀFDQꢀ
WUDQVIHUꢀ¿OHVꢀRUꢀSOD\ꢀFRQWHQWꢀGLUHFWO\ꢀRQꢀWKHꢀ$5&+26ꢁꢀ
• These devices can be Mass Storage Class (MSC) devices, such as digital
cameras, card readers, or external hard drives, or digital cameras using the
Picture Transfer Protocol (PTP).
• &KHFNꢀ\RXUꢀPDQXIDFWXUHU¶VꢀLQIRUPDWLRQꢀWRꢀ¿QGꢀRXWꢀZKHWKHUꢀ\RXUꢀGHYLFHꢀLVꢀ
an MSC or PTP device. Non Mass Storage Class devices such as printers,
Ethernet adapters, mice, keyboards, etc. are not supported.
ꢃꢂ Once the ARCHOS is on, connect the external USB device (with a standard USB
cable if needed) into the USB A port.
2. Turn on the external USB device if needed (check the documentation of your ex-
ternal USB device).
3. A double browser window will appear on the TV screen: the external USB device will
appear in the left panel, and your ARCHOS device’s hard drive in the right panel.*
ꢄꢀ<RXꢀFDQꢀDOVRꢀDFFHVVꢀWKHꢀFRQWHQWVꢀRIꢀ\RXUꢀ86%ꢀGHYLFHꢀIURPꢀWKHꢀ³9LGHR´ꢃꢀ
“Music” and “Photo” browsers.
4. ;QWꢁECPꢁVJGPꢁRNC[ꢁÒNGUꢁFKTGEVN[ꢁHTQOꢁVJGꢁ75$ꢁFGXKEGꢂꢁ6QꢁVTCPUHGTꢁÒNGUꢁVQꢇHTQOꢁ[QWTꢁ
USB device using the double browser, see Copying and Moving Files and Folders.
TV+
MANUAL V1.0
TRANSFERRING FILES > P. 42
TO DISCONNECT
ꢃꢂ Make sure that no transfer is being made.
2. From the Home screen, select the “Remove safely” menu item.
3. You can now pull out the USB cable on either end.
1RWHꢅꢀ\RXꢀPD\ꢀQRWꢀDOZD\VꢀEHꢀDEOHꢀWRꢀFRS\ꢀ¿OHVꢀWRꢀ\RXUꢀH[WHUQDOꢀ86%ꢀGHYLFHꢀ
from your ARCHOS.
6 .2 BROWSING OTHER COMPUTERS ON THE NETWORK
• When you are connected to a Windows® network, you can browse* the shared
folders of other computers in the network, using the ARCHOS File Browser.
• From the Home screen, select the “Files” icon. In the left panel of the browser,
UGNGEVꢁVJGꢁÒTUVꢁNKPGꢁKPꢁVJGꢁNKUVꢁꢆmNetwork”).Your device will connect to your WiFi /
Ethernet access point and then search for other computers in the Windows® net-
work.You can then choose a computer and start browsing its shared folders.
* If the computer with the shared folders normally has a Windows® username
and password, you will be asked to enter these before you can access the
folder contents.
7UKPIꢁVJGꢁ#4%*15ꢁFQWDNGꢁDTQYUGTꢅꢁ[QWꢁYKNNꢁDGꢁCDNGꢁVQꢁRNC[ꢁOGFKCꢁÒNGUꢁQTꢁVTCPUHGTꢁCP[ꢁ
ÒNGꢁHTQOꢁCꢁPGVYQTMGFꢁEQORWVGTꢁQPVQꢁ[QWTꢁFGXKEGꢂꢁ;QWꢁECPꢁCNUQꢁVTCPUHGTꢁÒNGUꢁHTQOꢁ[QWTꢁ
device onto a computer’s write-enabled shared folder (see Copying and Moving Files
and Folders).
If the WiFi is not enabled or if you are not connected to a network, the device
will scan for available networks and connect to a known network or display
the list of available networks so that you can connect to one of them.
TV+
MANUAL V1.0
TRANSFERRING FILES > P. 43
6 .3 CONNECTING THE ARCHOS TO A COMPUTER
CONNECTION STEPS
ꢃꢂ Plug a USB cable (not supplied) into the ARCHOS (USB B port).
2. Plug the other end of the USB cable into your running computer.
3. The ARCHOS’ icon will appear on your computer.You can now start transferring
ÒNGUꢁVQꢁKVꢂ
<RXꢀFDQQRWꢀFRS\ꢀ¿OHVꢀODUJHUꢀWKDWꢀꢇꢀ*%ꢀWRꢀWKHꢀ$5&+26ꢀGXHꢀWRꢀWKHꢀ)$7ꢈꢇꢀ¿OHꢀ
system constraints. For advanced users: in “PC Hard Drive” connection
PRGHVꢀꢉPRGHꢀꢇꢀDQGꢀꢈꢆꢃꢀWKHꢀPD[LPXPꢀVL]HꢀLVꢀꢇꢀ*%ꢀIRUꢀꢁ$9,ꢀ¿OHVꢀDQGꢀꢊꢀ*%ꢀIRUꢀ
DQ\ꢀRWKHUꢀW\SHꢀRIꢀ¿OHꢁꢀ6HHꢅꢀ“System” Settings.
TV+
MANUAL V1.0
TRANSFERRING FILES > P. 44
DISCONNECTING
When you disconnect the ARCHOS from a computer, your device automati-
FDOO\ꢀXSGDWHVꢀWKHꢀ$5&/LEUDU\ꢃꢀVRꢀWKDWꢀWKHꢀPHGLDꢀ¿OHVꢀ\RXꢀMXVWꢀFRSLHGꢀDSSHDUꢀLQꢀ
the Music and Photo Libraries.
Windows® XP or higher & WMP10 or higher
• Verify that no data are being transferred between your ARCHOS and your com-
puter.
• Now unplug the USB cable from your ARCHOS and/or computer.
Windows® 2000 or Me
DO NOT SIMPLY PULL OUTTHE CABLE AT ANYTIME!You must remove/unmount the
ARCHOS from the computer before disconnecting the USB cable to avoid loss of data
or freezing.
• 1PEGꢁCNNꢁ[QWTꢁVTCPUHGTUꢁCTGꢁÒPKUJGFꢅꢁENKEMꢁQPꢁVJGꢁkUCHGN[ꢁ
remove’ icon in the system tray, next to the clock.
• Click on the ‘safely remove’
message.
• A message will pop up, telling you that it is
now safe to disconnect the device*.You can
now safely unplug the USB cable from your
ARCHOS and/or computer.
* If you get a message saying that the device cannot be removed, close any
computer program that may still be using data on your device, such as media
players or Windows® Explorer.
Mac® OS X
DO NOT SIMPLY PULL OUT THE CABLE AT ANY TIME!
You must remove/unmount the ARCHOS from the
computer before disconnecting the USB cable to avoid
loss of data or freezing.
• On your desktop, drag the ARCHOS’ icon towards
the trashcan, which will turn into a big eject symbol.
• Drop the icon onto this eject symbol: the ARCHOS’
hard drive will disappear from the desktop.
• You can now safely unplug the USB cable from
your ARCHOS and/or computer.
TV+
MANUAL V1.0
TRANSFERRING FILES > P. 45
Linux
DO NOT SIMPLY PULL OUT THE CABLE AT
ANY TIME!
You must remove/unmount theARCHOS from
the computer before disconnecting the USB
cable to avoid loss of data or freezing.
• On your computer, right-click on the ARCHOS icon and select Safely Remove.
• Wait until the ARCHOS icon disappears, and safely unplug the USB cable from
your ARCHOS and/or computer.
TV+
MANUAL V1.0
MAIN SETTINGS > P. 46
7 .MAIN SETTINGS
In the Home screen, select the “Settings”
menu item and choose a setting.
USING THE BUTTONS
• To open a settings screen, press the Menu button and use the navigation but-
tons to highlight the “Settings” menu item.Then, select the setting you want
to modify (“Sound”, “TV Settings”, “Appearance”, etc.) and press OK.
• Once you are in a settings screen:
- use the up/down navigation buttons to highlight a parameter.
- use the left/right navigation buttons to select a different setting.
- YJGPꢁ[QWꢁJCXGꢁÒPKUJGFꢁCFLWUVKPIꢁ[QWTꢁUGVVKPIUꢅꢁRTGUUꢁVJGꢁ'ZKVꢁDWVVQPꢁ to
save them and go back to the Home screen.
- When it is possible, use the up/down navigation buttons to scroll the screen
up and down.
7 .1 “SOUND” SETTINGS
This screen allows you to adjust the
sound settings of your ARCHOS to
your personal taste.
“Audio Output”
- FGÒPGUꢁYJGVJGTꢁVJGꢁCWFKQꢁUKIPCNꢁKUꢁUGPVꢁQWVꢁXKCꢁVJGꢁmAnalog Line-Out”, “HDMI” or
“SPDIF” interface depending on how you have connected the ARCHOS to your TV.
“Bass Boost Level”
- adjusts the bass boosting level.
“Preset”
- CNNQYUꢁ[QWꢁVQꢁSWKEMN[ꢁUGNGEVꢁCꢁUQWPFꢁRTQÒNGꢂ
“Set Equalizer”
- CNNQYUꢁ[QWꢁVQꢁWUGꢁCꢁEWUVQOꢁUQWPFꢁRTQÒNGꢂꢁ5GNGEVꢁVJKUꢁQRVKQPꢁVQꢁGPVGTꢁVJGꢁGSWCNK\GTꢁ
screen (see next section).
TV+
MANUAL V1.0
MAIN SETTINGS > P. 47
“Balance” (not available in HDMI output mode)
- allows you to balance the sound between the left and right stereo channels.
“Reset”
- resets the sound parameters to the default values.
“EQUALIZER” SCREEN
• Your ARCHOS features a 5-band
equalizer.
• Select a band (Bass, Mid. bass, Mid.
range, Mid. treble or Treble), then
use the up/down arrows to change
the gain level for these frequency
ranges.
It is advised that you change these
settings while listening to music, in
order to be able to appreciate the
sound changes.
7 .2 “TV SETTINGS”
These settings could potentially make your screen go blank.You will need to select the
“Apply change” button before anything happens. Read the on-screen messagesVERY
CAREFULLY so that you do not get stuck with a blank screen.
“TV Connection”
- select the type of video output (“Composite”, “S-Video”, “Component”, “RGB” or
“HDMI”), based on how you have connected the ARCHOS to your TV.
“Resolution” *
- select the resolution that best adapts to your TV:“VGA 4/3 (640x480 60Hz)”,
“480p 16/9 (720x480 60Hz)” or “576p 16/9 (720x576 50Hz)”.
* This parameter only appears if you choose the “HDMI” TV connection mode.
TV+
MANUAL V1.0
MAIN SETTINGS > P. 48
“TV Standard” **
- choose between the “NTSC (USA)” and “PAL (Europe)” systems (select the one
that is compatible with your country’s television system).
“TV Format” **
- “4:3” or “16:9” - the format used by your television set to display images.
- the option “Wide screen” becomes available when you set the “TV standard”
parameter to “PAL (Europe)”.
** These parameters do not appear if you choose the “HDMI” TV connection mode.
“Audio Output”
- FGÒPGUꢁYJGVJGTꢁVJGꢁCWFKQꢁUKIPCNꢁKUꢁUGPVꢁQWVꢁXKCꢁVJGꢁmAnalog Line-Out”, “HDMI” or
“SPDIF” interface depending on how you have connected the ARCHOS to your TV.
“Apply change”
- use this button to apply your changes.
7 .3 “APPEARANCE” SETTINGS
“Picture name”
- allows you to select a picture to use as a wallpaper image. Select “None” if you do
not want any background image.
- you can choose between all default backgrounds or the images that you have
previously set as wallpapers.
- you can also set a picture as wallpaper from the Photo andVideo modes.
“Theme color”
- FGÒPGUꢁVJGꢁVJGOGꢁEQNQTꢁHQTꢁ[QWTꢁKEQPUꢁꢆCPFꢁHQTꢁVJGꢁDCEMITQWPFꢅꢁKHꢁ[QWꢁJCXGꢁFKU-
abled the use of a wallpaper).
TV+
MANUAL V1.0
MAIN SETTINGS > P. 49
“Cancel”
use this button to discard any changes you may have made since entering this screen.
-
7 .4 “NETWORK” SETTINGS
• 7KHꢀ¿UVWꢀWLPHꢀ\RXꢀWXUQHGꢀRQꢀ\RXUꢀ$5&+26ꢃꢀWKHꢀLQVWDOODWLRQꢀZL]DUGꢀKHOSHGꢀ
\RXꢀFRQ¿JXUHꢀWKHꢀ:L)LꢀDQGꢀ(WKHUQHWꢀFRQQHFWLRQVꢁꢀ
• Every time you restart your ARCHOS, it will automatically connect to the
ODVWꢀFRQ¿JXUHGꢀQHWZRUNꢁ
• 7KLVꢀVHFWLRQꢀH[SODLQVꢀKRZꢀWRꢀFKDQJHꢀ\RXUꢀ1HWZRUNꢀFRQ¿JXUDWLRQꢃꢀIRUꢀH[DP-
ple if you want to connect to a different network.
• This screen displays your connection
status.
• Select the “Network Details” button
to view the information concerning
the network the ARCHOS is currently
connected to: IP, security details, etc.
• You have the possibility to connect
to the internet via the WiFi or via an
Ethernet cable.
ETHERNET CABLE CONNECTION
• Select “Connect to an Ethernet Network...”
• Use the same procedure as for a WiFi open network when using an Ethernet cable.
• Jump ahead to the WiFi section Open Networks.
WIFI CONNECTION
When you select “Connect to a WiFi Network...”,The ARCHOS will scan for available
networks.The list of available networks will be displayed.
The List of Available Networks
• The list of available networks shows
all the wireless networks in range of
your device.
• In the list of available networks, you
will see the following information:
TV+
MANUAL V1.0
MAIN SETTINGS > P. 50
1.
%QPÒIWTCVKQPꢁUVCVWUꢀ
EQPÒIWTGFꢁPGVYQTM
WPEQPÒIWTGFꢁPGVYQTM
The name of the network (SSID), if it is broadcasted (if the SSID is not broad-
ECUVGFꢅꢁ[QWꢁYKNNꢁDGꢁRTQORVGFꢁVQꢁGPVGTꢁKVꢁKPꢁVJGꢁPGZVꢁEQPÒIWTCVKQPꢁUETGGPꢁKHꢁ[QWꢁ
EQPÒIWTGꢁVJKUꢁPGVYQTMꢈꢂ
2 .
3 .
4 .
The strength of the signal.
The type of encryption key that is required:
WPA key
Open network (no key)
WPA2 key
WEP key
5 .
6 .
The channel used by the network.
The type of network (Infrastructure or Ad-Hoc). Ad-Hoc networks are not sup-
ported at this time.
• Use the navigation buttons to highlight a network and press OK.
• ;QWꢁYKNNꢁDGꢁVCMGPꢁVQꢁVJGꢁEQPÒIWTCVKQPꢁUETGGPꢁHQTꢁVJKUꢁPGVYQTMꢅꢁYJGTGꢁ[QWꢁYKNNꢁ
have to enter some information to set up your access to this network.
:L)Lꢀ1HWZRUNꢀ&RQğJXUDWLRQ
+PꢁQTFGTꢁVQꢁEQPPGEVꢁVQꢁCꢁYKTGNGUUꢁPGVYQTMꢅꢁVJGꢁ#4%*15ꢁYKNNꢁPGGFꢁUQOGꢁURGEKÒEꢁKPHQT-
mation about the network.Your device will automatically pick up certain pieces of in-
formation that it needs from the WiFi router.You can enter the rest of the information
OCPWCNN[ꢁKPꢁVJGꢁPGVYQTMlUꢁEQPÒIWTCVKQPꢁUETGGPꢅꢁCUꢁUJQYPꢁKPꢁVJGꢁHQNNQYKPIꢁUGEVKQPUꢂ
Open Networks (also valid for Ethernet cable connection)
• Open networks do not require an
authentication key.
• If the network has automatic con-
ÒIWTCVKQPꢁVWTPGFꢁQPꢁꢆ&*%2ꢈꢍꢅꢁUKO-
ply select the “Connect” button,
and your ARCHOS will connect to
this network, provided the signal is
strong enough.
TV+
MANUAL V1.0
MAIN SETTINGS > P. 51
* Most networks support DHCP.
• +HꢁVJGꢁPGVYQTMꢁPGGFUꢁVQꢁDGꢁEQPÒI-
ured manually, use the left/right ar-
rows to select the “Manual” setting
on the “&RQ¿JXUDWLRQ” parameter.
• Other parameters will appear: the
required information can be ob-
tained from the person who man-
ages the network.
9JGPꢁ[QWꢁJCXGꢁÒPKUJGFꢁGPVGTKPIꢁCNNꢁVJGꢁKPHQTOCVKQPꢅꢁUGNGEVꢁVJGꢁmConnect” button,
and your ARCHOS will connect to this network, provided the signal is strong enough.
Protected Networks (WEP, WPA or WPA2 KEY)
• Protected networks require an en-
cryption key to connect.
• The type of key (WEP,WPA or
WPA2) will be detected automati-
cally by your device.
• The rest of the required information
can be obtained from the person
who manages the network.
You will have to specify the following settings:
“Key length” (for WEP networks only)
-
VJGꢁCWVJGPVKECVKQPꢁMG[ꢁECPꢁDGꢁꢃꢄꢁEJCTCEVGTUꢁNQPIꢁꢆꢐꢑDKVꢈꢁQTꢁꢋꢐꢁEJCTCEVGTUꢁNQPIꢁꢆꢃꢋꢒDKVꢈꢂ
“Key format” (for WEP networks only)
-
in some cases you may need to change the key format in order to enter a pass-
phrase/password. See the documentation that came with your WiFi router or modem.
“Key” (WEP or WPA)
- press OK, enter the encryption key using the remote control’s keyboard and press
OK again to validate.
“Authentication” (for WEP networks only)
- the network’s authentication method can be based on an “Open System (de-
fault)” or a “Shared Key”.
TV+
MANUAL V1.0
MAIN SETTINGS > P. 52
m%QPÒIWTCVKQPn
- it can be “Automatic (DHCP)” or “Manual”.
- if it is “Automatic (DHCP)”, then you do not have to enter any more information.
Simply use the “Connect” button, and your ARCHOS will connect to this network,
provided the signal is strong enough.
- KHꢁ[QWꢁOWUVꢁEQPÒIWTGꢁVJGꢁPGVYQTMꢁOCPWCNN[ꢅꢁUGNGEVꢁVJGꢁmManual” setting. Other
parameters will appear: the required information can be obtained from the person
who manages the network.
9JGPꢁ[QWꢁJCXGꢁÒPKUJGFꢁGPVGTKPIꢁCNNꢁVJGꢁKPHQTOCVKQPꢅꢁWUGꢁVJGꢁmConnect” button, and
your ARCHOS will connect to this network, provided the signal is strong enough.
)LOWHUHGꢀQHWZRUNVꢅꢀ,Iꢀ\RXUꢀQHWZRUNꢀPDQDJHUꢀDOORZVꢀRQO\ꢀVSHFL¿FꢀGHYLFHVꢀWRꢀ
FRQQHFWꢀWRꢀWKHꢀQHWZRUNꢀꢉNQRZQꢀDVꢀ0$&ꢀDGGUHVVꢀ¿OWHULQJꢆꢃꢀ\RXꢀFDQꢀVXSSO\ꢀWKHꢀ
QHWZRUNꢀPDQDJHUꢀZLWKꢀWKHꢀ0$&ꢀDGGUHVVꢀRIꢀ\RXUꢀ$5&+26ꢁꢀ7Rꢀ¿QGꢀRXWꢀZKDWꢀ
your MAC address is, select the “Settings” menu item from the Home screen,
then choose “System”. See: “System” Settings.
7 .5 “LANGUAGE AND REGION” SETTINGS
“Language”
- choose a language.
IWCIGUꢁCTGꢁKPENWFGFꢁKPꢁVJGꢁÒTOYCTGꢁCUꢁVJG[ꢁDGEQOGꢁCXCKNCDNGꢂꢁ5GGꢁUpdating the
Firmware.
“Select location”
- if your clock is set to “Automatic” (see “Clock” Settings), select your “Country”,
and “City/Zone”.
“WiFi Region”
- VJKUꢁKUꢁEQPÒIWTGFꢁCWVQOCVKECNN[ꢁCEEQTFKPIꢁVQꢁJQYꢁ[QWꢁUGVꢁ[QWTꢁNQECVKQPꢂ
TV+
MANUAL V1.0
MAIN SETTINGS > P. 53
7 .6 “TV CONTROL” SETTINGS
• This is where you can set the ARCHOS’ infrared emitter to communicate with
+
your tuner.This will allow the TV to turn on and change the channels of your
tuner (satellite receiver, set top box,VCR, DSL box) in order to make the scheduled
recordings one sets in the ARCHOS TV Program guide.
• See The TV program Guide.
7 .7 “CLOCK” SETTINGS
If you use the ARCHOS to schedule video recordings on your TV system,
make sure that the time and date are set correctly!
“Time Format”
- EJQQUGꢁDGVYGGPꢁꢃꢋJꢁQTꢁꢋꢑJꢁOQFGꢂꢁ
“Time setting”
- “Automatic”: select this parameter if you want to set the clock automatically
when your ARCHOS is connected to a WiFi / Ethernet network.You will need
to select your location in the “Language and Region” settings screen (see:
“Language and Region” Settings).
- “Manual”: select this parameter to set the current date & time manually.The fol-
lowing parameters will appear:“Hour”, “Minute”, “Year”, “Month” and “Day”.
“Synchronize now”
- if the “Time setting” parameter is set to “Automatic”, use this button to set the
clock automatically via a WiFi / Ethernet network.
- for this to work, the ARCHOS needs to be connected to a WiFi / Ethernet network.
ATTENTION: If the time & date are not correctly set, you might not be able to
access certain web pages.
TV+
MANUAL V1.0
MAIN SETTINGS > P. 54
“Hour”, “Minute”, “Year”, “Month”, “Day”
- these parameters allow you to set the current time and date manually.
7 .8 “FIRMWARE AND PLUG-INS” SETTINGS
“Firmware Ver.”
- FKURNC[UꢁVJGꢁEWTTGPVꢁXGTUKQPꢁQHꢁVJGꢁÒTOYCTGꢁCPFꢁ&KIKVCNꢁ4KIJVUꢁ/CPCIGOGPVꢁ
(DRM) system.
“Plug-ins”
- displays the current plug-ins installed on your device.
“Product Key”
- each ARCHOS has a unique number.
-
you will need this number to register your product online (www.archos.com/register).
“Firmware Update”
- WUGꢁVJKUꢁDWVVQPꢁVQꢁWRFCVGꢁVJGꢁÒTOYCTGꢁOCPWCNN[ꢁꢆUGGꢁPGZVꢁUGEVKQPꢈꢂ
“Online Firmware Update”
-
use this button to search for an online update via a WiFi / Ethernet network. If there
is one available, it will be installed automatically. See next section to learn more.
7 .9 UPDATING THE FIRMWARE
6JGꢁÒTOYCTGꢁKUꢁVJGꢁQRGTCVKPIꢁU[UVGOꢁꢆ15ꢈꢁQHꢁ[QWTꢁ#4%*15ꢂꢁ+VꢁKUꢁRGTKQFKECNN[ꢁWRFCVGFꢁ
VQꢁDTKPIꢁPGYꢁHGCVWTGUꢅꢁKORTQXGOGPVUꢁCPFꢁDWIꢁÒZGUꢂꢁ6JGTGꢁCTGꢁVYQꢁOCKPꢁYC[UꢁVQꢁWR-
FCVGꢁ[QWTꢁRTQFWEVlUꢁÒTOYCTGꢀ
+
• Directly on the ARCHOS TV via a WiFi / Ethernet network.
• Using a computer connected to the internet and a USB key.
TV+
MANUAL V1.0
MAIN SETTINGS > P. 55
(
UPDATE DIRECTLY ON THE ARCHOS WIFI / ETHERNET CONNECTION NEEDED
)
6JKUꢁKUꢁVJGꢁGCUKGUVꢁYC[ꢁVQꢁWRFCVGꢁVJGꢁÒTOYCTGꢂꢁ(QTꢁVJKUꢁVQꢁYQTMꢅꢁ[QWꢁQPN[ꢁPGGFꢁCPꢁCE-
cess to a WiFi / Ethernet network. See “Network” Settings.
ꢃꢂ From to the Home screen, select the “Settings”
menu item, and choose
“Firmware and Plug-ins”.
2. Use the “Online Firmware Update” button.
3. 6JGꢁ#4%*15ꢁYKNNꢁUGCTEJꢁQPNKPGꢁHQTꢁCꢁPGYꢁÒTOYCTGꢂꢁ+HꢁVJGTGꢁKUꢁQPGꢁCXCKNCDNGꢅꢁKVꢁ
will start downloading, and it will be installed automatically.
(
UPDATE USING A COMPUTER INTERNET CONNECTION NEEDED
)
If you cannot connect your ARCHOS to a WiFi / Ethernet network, you can also up-
FCVGꢁVJGꢁÒTOYCTGꢁWUKPIꢁCꢁEQORWVGTꢁEQPPGEVGFꢁVQꢁVJGꢁKPVGTPGVꢂꢁ;QWꢁYKNNꢁCNUQꢁPGGFꢁCꢁ
USB key (64 MB minimum size).
ꢃꢂ %QPPGEVꢁVJGꢁ75$ꢁMG[ꢁVQꢁ[QWTꢁEQORWVGTꢁCPFꢁIQꢁVQꢁYYYꢂCTEJQUꢂEQOꢇÒTOYCTGꢁQPꢁ
your web browser.
2. 5GCTEJꢁHQTꢁVJGꢁNCVGUVꢁÒTOYCTGꢁCXCKNCDNGꢁHQTꢁ[QWTꢁ#4%*15ꢁ68+.
3. Compare the latest online version with the one currently installed on your
#4%*15ꢀꢁ[QWTꢁ#4%*15lꢁÒTOYCTGꢁXGTUKQPꢁPWODGTꢁCRRGCTUꢁKPꢁVJGꢁmFirmware and
Plug-ins” settings screen (see: “Firmware and Plug-ins” Settings).
4. +HꢁVJGꢁQPNKPGꢁXGTUKQPꢁKUꢁOQTGꢁTGEGPVꢁVJCPꢁ[QWTUꢅꢁUCXGꢁVJGꢁÒNGꢁꢆÒNGꢁV[RGꢁꢂ#15ꢈꢁFKTGEVN[ꢁ
onto your USB key (place it at the root, that is to say not in any folder on the USB key).
<RXUꢀ,QWHUQHWꢀEURZVHUꢀPD\ꢀZDUQꢀ\RXꢀWKDWꢀWKHꢀFRQWHQWVꢀRIꢀWKHꢀ¿UPZDUHꢀ¿OHꢀ
could harm your computer. ARCHOS has taken precautions to insure that this
¿OHꢀZLOOꢀQRWꢀKDUPꢀ\RXUꢀFRPSXWHUꢁ
+
5. With your ARCHOS TV on and with the home screen displayed, plug the USB Key
+
+
into the USB Port of the TV .Wait for the TV to recognize the USB key and then
follow the on-screen instructions.
7 .10 “SYSTEM” SETTINGS
TV+
MANUAL V1.0
MAIN SETTINGS > P. 56
“Free Storage Space”
- displays the amount of free space on the hard drive.
1RWHꢅꢀUHSRUWHGꢀQXPEHUꢀRIꢀPHJDE\WHVꢀLVꢀELQDU\ꢋEDVHGꢀFRXQWLQJꢀꢉꢌ.E ꢌꢍꢇꢊꢀ
bytes). Thus each reported Mb represents approximately 1.05 megabytes
(decimal), and each reported Gb represents approximately 1.07 gigabytes.
Formatting also takes up space.
“USB preference” (for advanced users)
- Your preferred connection mode will be used every time you connect the
ARCHOS to a computer with an optional USB cable.The connection mode deter-
mines how your device interacts with your computer:
- /QFGꢁꢃꢀꢁmWindows Media Device”: Recommended for users of Windows Media®
2NC[GTꢁꢆ9/2ꢈꢁXGTUKQPꢁꢃꢄꢁQTꢁJKIJGTꢂꢁ9JGPꢁUGVꢁVQꢁVJKUꢁOQFGꢅꢁVJGꢁ#4%*15ꢁWUGUꢁVJGꢁ
Media Transfer Protocol (MTP).You will be able to synchronize your media library
automatically if you connect your ARCHOS to your computer via an optional
75$ꢁECDNGꢂꢁ9JGPꢁ[QWTꢁÒNGꢁVTCPUHGTꢁKUꢁÒPKUJGFꢅꢁUKORN[ꢁWPRNWIꢁVJGꢁECDNGꢁHTQOꢁVJGꢁ
ARCHOS, and your device will update the ARCLibrary (Music/Photo libraries).
- Mode 2:“PC Hard Drive”: Recommended for users of Windows® XP with
9KPFQYUꢁ/GFKC‚ꢁ2NC[GTꢁꢏꢅꢁ9KPFQYU‚ꢁꢋꢄꢄꢄꢅꢁ/Gꢅꢁ/CE‚ꢁ15ꢁ:ꢁQTꢁ.KPWZꢂꢁ
&KUEQPPGEVKQPꢀꢁYJGPꢁVJGꢁÒNGꢁVTCPUHGTꢁKUꢁQXGTꢅꢁUCHGN[ꢁWPOQWPVꢁVJGꢁ#4%*15ꢁꢆ5GGꢀꢁ
Disconnecting) and your device will do a quick ARCLibrary update (Music/Photo
NKDTCTKGUꢈꢂꢁ/C[ꢁPQVꢁKPFGZꢁCNNꢁÒNGUꢂ
- Mode 3:“PC Hard Drive (auto-ARCLib)”: Same as mode 2, but with a full
ARCLibrary update (Music/Photo libraries) at disconnection.
“Update ARCLibrary”
- Available only when “USB Preference” is set to “PC Hard Drive” (mode 2).
- This USB mode only does a quick ARCLibrary update (Music/Photo libraries). Use
the “Update ARCLibrary” button if you want to do a full ARCLibrary update.
“Product Key”
- each ARCHOS has a unique number.
-
you will need this number to register your product online (www.archos.com/register).
“MAC addresses”
- UQOGꢁ9K(Kꢁꢇꢁ'VJGTPGVꢁPGVYQTMUꢁÒNVGTꢁ/#%ꢁCFFTGUUGUꢂꢁ;QWꢁOKIJVꢁPGGFꢁVQꢁEQOOW-
nicate these addresses to the person who manages the network.
“Repair and Formatting Tools”
- use this button to access the “Repair and Formatting Tools” settings screen.This
screen allows you to do the following actions:
- “&OHDUꢀWHPSRUDU\ꢀV\VWHPꢀ¿OHVꢀDQGꢀFDFKH” (does not erase any data)
- “Reset Settings” (resets all user settings)
TV+
MANUAL V1.0
MAIN SETTINGS > P. 57
- “Format Hard DrivenꢁꢆGTCUGꢁCNNꢁFCVCꢅꢁOGFKCꢁÒNGUꢅꢁCPFꢁNKEGPUGUꢈ
- “Full ReinitializationnꢁꢆGTCUGꢁCNNꢁFCVCꢅꢁOGFKCꢁÒNGUꢅꢁNKEGPUGUꢁCPFꢁUGVVKPIUꢈ
In the event that your ARCHOS freezes or does not respond anymore,
try to restart it by disconnecting / reconnecting the power adapter (see:
Troubleshooting).
If this does not work or if you cannot access the Repair and Formatting Tools,
you can try a system recovery (see: Troubleshooting).
TV+
MANUAL V1.0
TV RECORDING: HARDWARE SETUP > P. 58
8 . TV RECORDING: HARD-
WARE SETUP
When connected to your home tuner (cable box, satellite receiver, digital
tuner, DSL box or VCR), you will be able to schedule recordings manually
or via the ARCHOS TV Program Guide (EPG).
8 .1 CONNECTION PRINCIPLES
• The ARCHOS is a ‘pass-through’ device.This means that when it is off or when
you press the TV button, it simply passes the audio and video signals (from cable
box, satellite receiver, digital tuner, etc.) through the ARCHOS to your television
(not in HDMI output mode).
• What this means is that you will place the ARCHOS ‘between’ your television
reception device (Cable box, satellite receiver, Digital TV receiver, etc.) and your
television. See diagrams on next page.
• When connecting cables between devices, always remember that the OUT con-
nectors of one device must be connected by cables to the IN connectors of the
next device.You can think of it as the signals traveling out of one device into the
next device. Finally, make sure that you always match the color of the connector
with the color of the jack it is being plugged into.
8 .2 CONNECTING A TUNER TO YOUR ARCHOS
This shows the basic connection setup of a television source (tuner), the ARCHOS, and
your TV.
ꢃꢂ Your tuner needs to be connected to your home antenna/satellite/cable.
2. Connect your tuner’s TV outputs to the ARCHOS’ inputs (see diagrams on next
page).
3. The ARCHOS’ outputs should already be connected to your TV. If not, see dia-
grams on next page.
+
9 If you can still watch TV when the ARCHOS TV is off (but plugged in), it means
that you have correctly connected the ARCHOS as a pass-through device.
: If you cannot watch TV anymore, this means that there is an incorrect connec-
tion. Check the previous connections steps carefully.
TV+
MANUAL V1.0
TV RECORDING: HARDWARE SETUP > P. 59
Connection Diagram for Europe:
Connection Diagram for North America: *
TV+
MANUAL V1.0
TV RECORDING: HARDWARE SETUP > P. 60
* North America: if either your tuner or TV does not have S-video connections,
use standard male/male RCA cables instead of the supplied S-video cables.
ARCHOS PASS-THROUGH TABLE
The ARCHOS will pass through the following video signals when it is off, or when you
press the TV button on the remote control:
Video input
Video Output
Pass-through
Composite
yellow connector or supplied
scart (Europe)
Composite
yellow connector
Yes
No
S-Video
will only show black & white image
RGB
(PR/R, PB/B,Y/G)
No
HDMI
No
Yes
S-Video
S-Video
or S-Video on supplied scart
(Europe)
Composite
No
yellow connector
will only show black & white image
RGB
(PR/R, PB/B,Y/G)
No
No
No
No
Yes
No
HDMI
RGB
(PR/R, PB/B,Y/G)
Composite
yellow connector
S-Video
RGB
(PR/R, PB/B,Y/G)
HDMI
Note for Europe:
+
In order to get the best video recording quality on the TV (RGB), you may need to set
your tuner device’s scart output to exit an RGB signal. Check your tuner’s manual.
TV+
MANUAL V1.0
TV RECORDING: HARDWARE SETUP > P. 61
Note for HDMI Connections:
•
Europe : Since the HDMI output connection does not allow a pass-through from any of
the analog inputs, ARCHOS recommends that you connect your tuner’s primary scart
+
output directly to your television and the auxiliary (secondary) scart output to the TV
+
inputs. In this case, you would not use the analog output connectors of the TV .
• North America: Since the HDMI output connection does not allow a pass-through
from any of the analog inputs, ARCHOS recommends that you connect one of your
+
tuner’s video outputs directly to the TV and a secondary video output to the TV
+
inputs. In this case, you would not use the analog output connectors of the TV .
8 .3 CONNECTING WITH A TV ONLY (NO EXTERNAL TUNER)
• If your television has output connectors in addition to the inputs, you will be able
to record from your television. Connect the TV’s audio/video outputs to the in-
+
puts of the TV .
• With this setup, you will only be able to record the channel that is currently dis-
played on the screen.You will also not be able to use the TV Program Guide or the
scheduler.
TV+
MANUAL V1.0
THE TV PROGRAM GUIDE > P. 62
9 . THE TV PROGRAM GUIDE
With the ARCHOS TV Program Guide (EPG), you will be able to schedule
TGEQTFKPIUꢁGCUKN[ꢂꢁ6JGꢁ68ꢁRTQITCOꢁIWKFGꢁUGTXKEGꢁKUꢁHTGGꢁHQTꢁVJGꢁÒTUVꢁ[GCTꢂꢁ
9 .1 WHAT’S REQUIRED TO USE THIS FUNCTION?
• In order to use this functionality, you will need to connect the powered ARCHOS
to a tuner, which can be either:
- a satellite receiver
- a Digital TV receiver
- a cable/DSL box
- a VCR
- a DVD Recorder
• See: TV Recording: Hardware Setup.
Your tuner will need to be connected to your home antenna/satellite/cable.
9 .2 ACTIVATING THE TV PROGRAM GUIDE ONLINE
After having connected the ARCHOS to your home television system, you will need to
activate the TV Program Guide (EPG) online.This is a one-time operation.
2. Access your ARCHOS account (or create one if you don’t have one yet) and regis-
VGTꢁ[QWTꢁ#4%*15ꢂꢁ+Hꢁ[QWꢁJCXGꢁCNTGCF[ꢁTGIKUVGTGFꢁ[QWTꢁ#4%*15ꢅꢁÒPFꢁVJGꢁNKPGꢁVJCVꢁ
matches your product and click on More... (on the right).
3. Follow the instructions to activate the TV Program Guide.
TV+
MANUAL V1.0
THE TV PROGRAM GUIDE > P. 63
9 .3 TRANSFERRING THE PROGRAM DATA TO THE ARCHOS
Once you have activated the TV Program Guide online, you now need to transfer its
data onto your ARCHOS. In order to do that, your ARCHOS needs to be connected to
the internet.
First time Procedure
ꢃꢂ Turn on your ARCHOS device.
2. From the Home screen, select the “Recorder” icon.
3. Select the “Update” menu item.Your ARCHOS will automatically connect to a
EQPÒIWTGFꢁPGVYQTMꢂꢁ
9+Hꢁ[QWTꢁ#4%*15ꢁÒPFUꢁCꢁEQPÒIWTGFꢁ9K(Kꢁꢇꢁ'VJGTPGVꢁPGVYQTMꢁCPFꢁKHꢁ[QWꢁJCXGꢁEQT-
rectly activated the TV Program Guide online, the TV Program data will start up-
dating automatically.This operation can take several minutes.
Do not try to operate the device while it is downloading TV Program information.
Updating the TV Program Guide periodically
• Every time you transfer the TV Program Guide information to the ARCHOS, your
device will memorize all the TV Programs within a certain period of time.
• Remember to update the data periodically: the ARCHOS will remind you to up-
date your TV Guide before it becomes obsolete (select the “Settings” menu item
if you want to set the update reminder).
• You also have the possibility to let the ARCHOS automatically update the TV
Program Guide information at night:
- Select the “Settings” menu item and set the “Automatic Updates” parameter
to “On”.
9 .4 CONFIGURING THE TV CONTROL SETTINGS
• From the ARCHOS Home Screen,
select the “Settings” menu item,
and choose “TV Control” to display
the “TV Control” settings screen.
• This settings screen allows you to
set the ARCHOS’ IR emitter as well
as configure the channel list.
TV+
MANUAL V1.0
THE TV PROGRAM GUIDE > P. 64
VERIFYING THE CHANNEL LIST
ꢃꢂ From the “TV Control” screen, select “Set TV Channel List”.
2. Verify that the channel list on the ARCHOS is the same as on your tuner.
3. Here you can deselect/select a channel or change the number of a channel.
SETTING THE IR EMITTER
• The ARCHOS has a high-powered infrared LED, located on the front of the device,
at the same place as the infrared receiver.
+
• It allows your ARCHOS TV to communicate with your tuner (VCR, cable box, sat-
ellite receiver or Digital TV receiver), so that it can turn it on and off, and change
channels on it.
• This is a one time step to set your ARCHOS device to send the correct infrared
codes to control your tuner. If you do not plan on making scheduled recordings,
then you do not need to set the infrared emitter code.
1st Test: turning your tuner off
ꢃꢂ From the “TV Control” screen, select “Set Infrared Emitter”.This first screen al-
lows you to correctly set the codes and parameters so that the ARCHOS can turn
your tuner on/off automatically (for a scheduled recording).
2. “TV Receiver”: select the type of tuner that you want to control with the IR
Emitter (“VCR”, “Cable/DSL box”, “Satellite Receiver”, “DVD Recorder” or
“Digital TV”).
3. “Receiver brand”: choose the brand of your tuner.You can use the Accelerator
buttons
on the remote control to scroll the list faster.
TV+
MANUAL V1.0
THE TV PROGRAM GUIDE > P. 65
4. Select the “Test power Off code” button. Make sure that your tuner is on.Your
ARCHOS device will then try to turn your tuner off. After a few seconds, your
ARCHOS will ask you if the device responded correctly:
9 If your tuner turned off, select “Yes”, and move on to the next section.
: If your tuner did not turn off, select “No, try next code”.Your device will try turn-
ing the tuner off again, using a different code. Repeat this operation until the
ARCHOS manages to turn the tuner off.
If none of the codes work, check that the ARCHOS is positioned in a way that
allows the infrared signal to reach your tuner’s receiver. Note: In some rare
cases the ON/OFF functionality may not work.
2nd Test: changing channels on your tuner
After you select “YesnꢁCVꢁVJGꢁGPFꢁQHꢁVJGꢁꢃst test, the following screen appears. It allows
you to correctly set the parameters so that the ARCHOS can change channels on your
tuner (for a scheduled recording).
ꢃꢂ For the “Channel” parameter, select the highest channel that is currently memo-
rized on your tuner.
2. Select the “Test channel select” button. Make sure that your tuner is on.Your
ARCHOS device will then attempt to switch your tuner to the selected channel.
After a few seconds, your ARCHOS will ask you if the device responded correctly:
9 If this worked, select “Yes”.
: If this did not work, select “No, try next option”.Your device will try again to
switch your tuner to the selected channel, using a different option*. Repeat this
operation until it successfully changes the channel on your TV receiver.
*Here is a description of the different parameters automatically set by the ARCHOS:
- “Key Delay”: delay between the emission of each digit of a channel (“Short”, “Normal”, “Long”).
- “Key: Enter”: Set to “On” if normally, you have to press an “OK” button on your turner’s remote control
CHVGTꢁ[QWꢁGPVGTꢁVJGꢁEJCPPGNꢁPWODGTꢂꢁ'ZCORNGꢀꢁ+Hꢁ[QWꢁPQTOCNN[ꢁRTGUUꢁꢃꢅꢁꢉꢅꢁmOKnꢁVQꢁCEEGUUꢁEJCPPGNꢁꢃꢉꢅꢁVJGPꢁ
this parameter is set to “On”.
TV+
MANUAL V1.0
THE TV PROGRAM GUIDE > P. 66
- “Key: -/--”: Set to “On” if normally, you need to press a special key on your tuner’s remote control before
entering a channel with several digit numbers (that is to say a channel greater than 9).This key is often
represented with this symbol:“-/--”.
- “Switches on with”: see below.
- “Time until video”: see below.
If the ARCHOS did not manage to switch your tuner to the selected channel,
you can try using a different ON/OFF code (see: 1st Test: turning your tuner off)
nd
DQGꢀGRꢀWKHꢀꢇ test again.
3. After you selected “Yes” at the end of the 2nd step, the following screen appears.
You will have to set these two parameters:
- “Switches on with”: this depends on what key you normally press, on your
tuner’s remote control, to turn it on. If you normally press the “Power” key,
select “Power”. If you can press any channel key, then select “Any channel”. If
you can press any key, select “Any key”.
- “Time until video”: select the amount of time it normally takes between the
moment you turn on your tuner, and the moment the image appears on your
TV (“0...10 seconds”, “10...30 seconds”, “>30 seconds”).
4. 9JGPꢁ[QWꢁJCXGꢁÒPKUJGFꢅꢁUGNGEVꢁmDonenꢅꢁCPFꢁCꢁEQPÒTOCVKQPꢁOGUUCIGꢁYKNNꢁCRRGCTꢂꢁ
Select “OK”.
9 .5 SCHEDULING YOUR RECORDING
ꢃꢂ In the Home screen, select the
“Recorder” icon to display the
ARCHOS TV Program Guide.
2. This screen’s menu items will al-
low you to choose a different day,
update the Program Guide data, or
change various settings (program
guide update and channel list con-
ÒIWTCVKQPꢈꢂ
TV+
MANUAL V1.0
THE TV PROGRAM GUIDE > P. 67
3. Navigate through the different TV programs, and simply select the one you wish
to record.
4. A new window will appear with a description of the TV program. Select “Record”.
5. You will go back to the TV Program Guide and a ‘REC’ icon will now appear next
to the TV Program you selected.
TV+
MANUAL V1.0
OTHER RECORDING FUNCTIONS > P. 68
10. OTHER RECORDING FUNCTIONS
10 .1 THE “TV SCHEDULER”
With the tuner connected to your ARCHOS (see: TV Recording: Hardware Setup), you
can schedule recordings manually. If you want to schedule via the TV Program Guide,
see The TV Program Guide.
• From the ARCHOS Home Screen, select the “Recorder” icon, and switch to the
“TV Scheduler” tab (Tab button ).
• This screen allows you to view, edit and schedule your recordings.
• Here you can schedule a new recording or edit an existing one: you can remove it,
edit its title, change the time, date, channel, etc.You also have the possibility to
add a safety margin to the beginning/end of the scheduled recording.To set this
parameter, use the “Settings” menu item.
NOTES ABOUT THE SCHEDULER
• The scheduler automatically reorganizes the recording events chronologically.
• If you are listening to music, watching a video or looking at photos with the de-
vice, it will not interrupt you to make the scheduled recording.
• Once the scheduled recording has been made, or the date of a recording has been
passed without the recording having been made, the schedule entry will be erased
from the scheduler.
10 .2 RECORDING VIDEO MANUALLY
With the tuner connected to your ARCHOS (see: TV Recording: Hardware
Setup), you can schedule recordings manually. If you want to schedule via
the TV Program Guide, see The TV Program Guide.
TV+
MANUAL V1.0
OTHER RECORDING FUNCTIONS > P. 69
RECORDING PROCEDURE
ꢃꢂ In the Home screen, select the “Recorder” icon and use the Tab button
to ac-
cess the “Video Recorder” mode.
2. This screen will allow you to adjust
the recording sound gain (left/right
CTTQYUꢈꢁCUꢁYGNNꢁCUꢁEQPÒIWTGꢁQVJGTꢁTG-
cording parameters (see next section).
3. You can now start a video recording
by pressing the OK button.You can
pause and resume your recording at
any time (OK button).
4. Close the screen to stop and save the recording*.The automatic stop setting
(“Auto Stop Rec”) is preset to 2 hours.
* All video recordings made by your ARCHOS device are saved in the Video/
(Rec) folder. If you wish to keep them in a different location, you can use the
³0RYH´ꢀIXQFWLRQꢀRIꢀWKHꢀ$5&+26ꢀ¿OHꢀEURZVHUꢀDIWHUꢀUHFRUGLQJꢁ
“VIDEO RECORDER” SETTINGS
To access the “Video recorder” settings screen, select the “Settings” menu item:
- “Auto Stop Rec”: the duration of time after which the ARCHOS will automatically stop re-
cording. If you disable this function, the recording will continue until you press or until the
GPVKTGꢁJCTFꢁFTKXGꢁÒNNUꢁWRꢂ
- “Rename”: CNNQYUꢁ[QWꢁVQꢁFGÒPGꢁVJGꢁÒNGPCOGꢁDGHQTGꢁVJGꢁTGEQTFKPIꢁDGIKPUꢅꢁWUKPIꢁVJGꢁTGOQVGꢁ
control’s keyboard.
- “Source”: you can choose which video input (“Auto”/“Composite”/“S-Video”/“Scart”/
“Component”/“RGB”) you want the ARCHOS to use. Normally, with a good video signal,
you can set it to “Auto” and your ARCHOS will scan its inputs to see which one is receiving
video.
- “Format”: “Auto”/“4:3”/“5:3”/“16:9”/“2.35”.This is the aspect ratio of the screen that the
ARCHOS device will record.You can set this manually, but in most cases you can just leave it
on “Auto”.
- “Widescreen”: “Auto”/“On”/“Off”. If your tuner (cable box, satellite receiver, etc.) outputs a
video signal in widescreen, you can force the ARCHOS to recognize this signal.This should be
set to “On” if recordings show people that look unusually tall and thin. But in most cases you
can just leave it on “Auto”.
TV+
MANUAL V1.0
OTHER RECORDING FUNCTIONS > P. 70
- “Bitrate”: 500kb/s, 1000kb/s, 1500kb/s, 2000kb/s, 2500kb/s. Use this to set the encoding
quality.The higher the encoding rate, the higher the image quality but also more hard drive
space will be used.
- “Sampling”: 32kHz, 48kHz.This is the sound sampling rate.The higher value gives a higher
quality sound but will take up more space on the hard drive.
- “Contrast”: adjusts the recorded image contrast.
- “Brightness” *: adjusts the recorded image brightness.
- “Saturation” *: use this to de-emphasize or saturate the colors in the recorded image.
- “Hue” *: changes the color spectrum in the recorded image.
- “RGB settings” *: “Automatic”/ “Manual”. Allows you to adjust the 3 RGB color levels
(only when the source outputs an RGB signal).
- “Blue saturation” *: Adjusts the level of blue (only when the source outputs a component
signal).
-
“Red saturation” *: Adjusts the level of red (only when the source outputs a component signal).
- “Reset”: changes the above settings to the default values.
* These parameters will vary according to which type of signals are present on
the TV+ inputs.
COPY PROTECTION
• The ARCHOS recording system is designed to respect the Macrovision™ copyright
protection system. If the source of your video is copy-protected, the device will
record in protected mode.You will see a ‘P’ icon on the recording screen (not dur-
KPIꢁRNC[DCEMꢈꢅꢁKPFKECVKPIꢁVJCVꢁVJGꢁÒNGꢁYKNNꢁDGꢁCꢁRTQVGEVGFꢁÒNGꢂ
• 2TQVGEVGFꢁÒNGUꢁECPꢁQPN[ꢁDGꢁRNC[GFꢁDCEMꢁQPꢁVJGꢁ#4%*15ꢁVJCVꢁETGCVGFꢁVJGOꢅꢁCPFꢁ
PQVꢁQPꢁCꢁEQORWVGTꢂꢁ6JGꢁRNC[DCEMꢁQHꢁRTQVGEVGFꢁÒNGUꢁKUꢁCNUQꢁNKOKVGFꢁVQꢁVJGꢁ*&/+ꢇ
HDCP video output (in this case, your TV must have an HDMI/HDCP input con-
nector). It cannot be displayed on a television using any other video output type.
10 .3 RECORDING AUDIO MANUALLY
With the ARCHOS, you have the possibility to record audio from most
CP[ꢁUVCPFCTFꢁCWFKQꢁUQWTEGꢁꢆJKꢊÒꢅꢁVWTPVCDNGꢅꢁDQQODQZꢅꢁGVEꢈꢂꢁ
RECORDING PROCEDURE
ꢃꢂ Connect your audio source’s outputs to the ARCHOS’ inputs.
TV+
MANUAL V1.0
OTHER RECORDING FUNCTIONS > P. 71
2. In the Home screen, select the “Recorder” icon and use the tabs ( button) to ac-
cess the “Video Recorder” mode.Then select the “Audio Recorder” menu item.
3. This screen will allow you to adjust the recording sound gain (left/right arrows) as
YGNNꢁCUꢁEQPÒIWTGꢁQVJGTꢁTGEQTFKPIꢁRCTCOGVGTUꢁ(see next section).
4. Start the recording by pressing the OK button.You can pause and resume your
recording at any time (OK button).
5. Close the screen to stop and save the recording*.
* All audio recordings made by your ARCHOS device are saved in the Music/
(Rec) folder. If you wish to keep them in a different location, you can use the
³0RYH´ꢀIXQFWLRQꢀRIꢀWKHꢀ$5&+26ꢀ¿OHꢀEURZVHUꢀDIWHUꢀUHFRUGLQJꢁ
“AUDIO RECORDER” SETTINGS
To access the “Audio Recorder” settings screen, select the “Settings” menu item:
- “Set Title”: allows you to give a personalized title to the recording, using the remote con-
trol’s keyboard.
- “Format”: you can choose between “PCM” (uncompressed) and “ADPCM” (compressed)
WAV format.
- “Sampling”: choose the sample rate for your recording (a higher rate gives higher sound
SWCNKV[ꢁDWVꢁCꢁNCTIGTꢁÒNGꢈꢂ
%HꢀFDUHIXOꢀWKDWꢀWKHꢀDXGLRꢀVRXUFHꢀLVꢀVXSSO\LQJꢀDꢀOLQHꢋOHYHOꢀDQGꢀQRWꢀDQꢀDPSOL¿HGꢀ
VLJQDOꢁꢀ$ꢀVLJQDOꢀWKDWꢀLVꢀDPSOL¿HGꢀWRRꢀPXFKꢀZLOOꢀUHVXOWꢀLQꢀDꢀWHUULEO\ꢀGLVWRUWHGꢀUH-
cording.
10 .4 EDITING YOUR RECORDINGS
• 8KFGQꢁÒNGUꢁTGEQTFGFꢁYKVJꢁVJGꢁ#4%*15ꢁECPꢁDGꢁGFKVGFꢁD[ꢁFGNGVKPIꢁVJGꢁUGEVKQPUꢁ[QWꢁ
do not wish included.The editing you can do is either cropping or cutting of par-
VKEWNCTꢁUGIOGPVUꢁQHꢁVJGꢁXKFGQꢁÒNGꢂꢁ
•
;QWꢁYKNNꢁOCTMꢁCꢁUGIOGPVꢁQHꢁ[QWTꢁXKFGQꢁÒNGꢅꢁCPFꢁVJGPꢁ[QWꢁYKNNꢁVGNNꢁVJGꢁ#4%*15ꢁVQꢁ
delete everything except the marked segment or to delete the marked segment from
VJGꢁXKFGQꢁÒNGꢂꢁ6JGUGꢁQRGTCVKQPUꢁECPꢁDGꢁFQPGꢁOWNVKRNGꢁVKOGUꢁQPꢁVJGꢁUCOGꢁXKFGQꢁÒNGꢂꢁ
•
1PEGꢁÒPKUJGFꢅꢁ[QWꢁYKNNꢁJCXGꢁVJGꢁQRVKQPꢁVQꢁUCXGꢁVJGꢁGFKVꢁOCTMUꢁYKVJꢁVJGꢁXKFGQꢁQTꢁVQꢁ
YTKVGꢁCꢁPGYꢁXKFGQꢁÒNGꢂꢁ+Hꢁ[QWꢁUCXGꢁ[QWTꢁÒNGꢁYKVJꢁGFKVꢁOCTMUꢅꢁ[QWꢁECPꢁCNYC[UꢁIQꢁDCEMꢁ
and change your edits at another time.The actual video information is not deleted. On
VJGꢁQVJGTꢁJCPFꢅꢁ[QWꢁECPꢁYTKVGꢁCꢁPGYꢁÒNGꢁYJKEJꢁYKNNꢁQPN[ꢁKPENWFGꢁVJGꢁXKFGQꢁRCTVUꢁVJCVꢁ
[QWꢁURGEKÒGFꢁKPꢁVJGꢁGFKVꢁUGUUKQPꢂꢁ6JKUꢁÒNGꢁYKNNꢁDGꢁUOCNNGTꢁDWVꢁ[QWꢁECPꢁPGXGTꢁWPꢊGFKVꢁKVꢂ
TV+
MANUAL V1.0
OTHER RECORDING FUNCTIONS > P. 72
EXAMPLE 1
You have recorded a music video program and would like to keep one single music
presentation. But you do not want to keep the rest of the television recording.
Beginning of recording
Video section to keep
End of recording
ꢃꢂ 1RGPꢁVJGꢁXKFGQꢁÒNGꢁ[QWꢁYCPVꢁVQꢁGFKVꢁCPFꢁRCWUGꢁKVꢂꢁ
2. In the progression bar, go to the beginning of the desired section (a), select the
“Insert a mark” menu item, and choose “Start Mark”.
3. Forward to the end of the desired section (b), select the “Insert a mark” menu
item, and choose “End Mark”.
4. Select the “Edit Selection” menu item and choose “Crop”, which will delete
everything except the designated section.
EXAMPLE 2
You have recorded a television program but would like to remove certain sections
before the program started, parts during the program, and the program afterwards
because you had recorded a little extra.
ꢃꢂ 1RGPꢁVJGꢁXKFGQꢁÒNGꢁ[QWꢁYCPVꢁVQꢁGFKVꢁCPFꢁRCWUGꢁKVꢂ
2. +PꢁVJGꢁRTQITGUUKQPꢁDCTꢅꢁIQꢁVQꢁVJGꢁDGIKPPKPIꢁQHꢁVJGꢁÒTUVꢁWPFGUKTGFꢁUGEVKQPꢁꢆCꢈꢅꢁUGNGEVꢁ
the “Insert a mark” menu item, and choose “Start Mark”. Forward to the end
QHꢁVJGꢁÒTUVꢁWPFGUKTGFꢁUGEVKQPꢁꢆDꢈꢅꢁUGNGEVꢁVJGꢁmInsert a mark” menu item, and
choose “End Mark”. Select the “Edit Selection” menu item and choose “Cut”,
which will cut out this part of the recording.
3. Go to the beginning of the second undesired section (c), select the “Insert a
mark” menu item, and choose “Start Mark”. Forward to the end of the second
undesired section (d), select the “Insert a mark” menu item, and choose “End
Mark”. Select the “Edit Selection” menu item and choose “Cut”, which will cut
out this section.
4. Do the same for the other section(s) that you want to cut out.
TV+
MANUAL V1.0
OTHER RECORDING FUNCTIONS > P. 73
• If you want to keep the edit points and be able to re-edit another time, select
the “Save edit” menu item, and choose “Save”.
•
,Iꢀ\RXꢀZDQWꢀWRꢀVDYHꢀWKHꢀHGLWHGꢀ¿OHꢀDVꢀDꢀQHZꢀLQGLYLGXDOꢀ¿OHꢃꢀVHOHFWꢀWKHꢀ³6DYHꢀHGLW´ꢀ
PHQXꢀLWHPꢃꢀDQGꢀFKRRVHꢀ³:ULWHꢀWRꢀQHZꢀ)LOH´ꢁꢀ$ꢀFRQ¿UPDWLRQꢀVFUHHQꢀZLOOꢀSRSꢀXSꢁꢀ
• If you want to cancel the edit points and restart editing, choose the “Cancel
changes and restart edit” menu item.
TV+
MANUAL V1.0
TROUBLESHOOTING > P. 74
TROUBLESHOOTING
RESTARTING / RESETTING YOUR ARCHOS
• In the event that your ARCHOS freezes or does not respond anymore, disconnect
VJGꢁRQYGTꢁCFCRVGTꢅꢁYCKVꢁHQTꢁꢃꢎꢁUGEQPFUꢁCPFꢁTGEQPPGEVꢁKVꢂꢁ9JGPꢁVJGꢁTGFꢁ.'&ꢁKPFK-
cator stops blinking, press the Power button on the supplied remote control to
turn on your device.
• ONLY use the Reset button, on the back of the device, if you need to relaunch
the Installation Wizard.When you press this button, the ARCHOS will restart and
CꢁOGUUCIGꢁYKNNꢁRQRꢁWRꢁVQꢁEQPÒTOꢁVJGꢁTGNCWPEJꢁQHꢁVJGꢁYK\CTFꢂꢁ+Hꢁ[QWꢁFQꢁPQVꢁTG-
URQPFꢁYKVJKPꢁꢃꢄꢁUGEQPFUꢅꢁVJGꢁYK\CTFꢁYKNNꢁDGꢁCWVQOCVKECNN[ꢁTGNCWPEJGFꢂꢁ5GGꢀꢁThe
Installation Wizard.
ATTENTION: if you use the reset button and relaunch the wizard, no data will
be erased but your TV connection settings will be lost, and you will have to set
them up again through the wizard.
SYSTEM RECOVERY
• If your ARCHOS does not respond correctly, or does not show certain songs or
videos that you have copied to it, try using the “Repair and Formatting Tools”
(see: System Settings).
• If using the “Repair and Formatting Tools” does not solve your problem, you can
try a system recovery. It allows you to repair the hard drive, format it, etc.
ꢃꢂ 4GUVCTVꢁ[QWTꢁFGXKEGꢁꢆFKUEQPPGEVꢁVJGꢁRQYGTꢁCFCRVGTꢁꢇꢁYCKVꢁHQTꢁꢃꢎꢁUGEQPFUꢁꢇꢁTGEQP-
nect it).
2. The red indicator starts blinking, and after a few seconds, it will start blinking
faster.While the red indicator is blinking faster, press the TV button on the re-
mote control to access the Recovery mode.
If the image does not appear, press the TV button and wait for a few seconds.
Repeat this operation until you can see the recovery screen (white back-
ground).
While you are in recovery mode, use the navigation buttons of the remote control to
move from one option to another and press OK to validate.
TV+
MANUAL V1.0
TROUBLESHOOTING > P. 75
FORCING THE FIRMWARE UPDATE
6QꢁWRFCVGꢁVJGꢁÒTOYCTGꢅꢁCNYC[UꢁVT[ꢁVQꢁFQꢁKVꢁCUꢁGZRNCKPGFꢁKPꢁVJGꢁUGEVKQPꢀꢁUpdating the
Firmware. +HꢁVJKUꢁFQGUꢁPQVꢁYQTMꢅꢁ[QWꢁECPꢁHQTEGꢁVJGꢁÒTOYCTGꢁWRFCVGꢁꢆÒTUVꢁUETGGPꢁQHꢁVJGꢁ
recovery mode):
“No”
-
ECPEGNUꢁVJGꢁÒTOYCTGꢁWRFCVGꢁCPFꢁDTKPIUꢁ[QWꢁVQꢁVJGꢁUGEQPFꢁUETGGPꢁQHꢁVJGꢁTGEQXGT[ꢁOQFGꢂ
“Yes”
- HQNNQYꢁVJGꢁQPꢊUETGGPꢁKPUVTWEVKQPUꢁVQꢁHQTEGꢁVJGꢁÒTOYCTGꢁWRFCVGꢂꢁ;QWꢁYKNNꢁPGGFꢁVQꢁ
EQPPGEVꢁCꢁ75$ꢁMG[ꢁVQꢁVJGꢁ#4%*15lꢁJQUVꢁRQTVꢁꢆVJGꢁÒTOYCTGꢁꢂ#15ꢁÒNGꢁOWUVꢁDGꢁ
located at the root of the USB key).
FORCING THE SYSTEM RECOVERY
If you select “NonꢁKPꢁVJGꢁÒTUVꢁUETGGPꢁQHꢁVJGꢁTGEQXGT[ꢁOQFGꢅꢁCꢁUGEQPFꢁUETGGPꢁCRRGCTUꢅꢁ
giving you 3 options:
“No”
- cancels the system recovery.
“Repair Disk”
- CVVGORVUꢁVQꢁTGRCKTꢁVJGꢁÒNGꢁUVTWEVWTGꢁQPꢁVJGꢁJCTFꢁFTKXGꢂ
- does not erase any data.
“Format Disk”
- formats the hard drive.
- all data (music, photos, videos, etc.), licenses and settings are erased.
REPAIR AND FORMATTING TOOLS
TV+
MANUAL V1.0
TROUBLESHOOTING > P. 76
- to access the “Repair and Formatting Tools” settings screen: from the Home
screen, select the “Settings” menu item, choose “System”, then use the “Repair
and Formatting Tools” button.This screen allows you to do the following actions:
- “&OHDUꢀWHPSRUDU\ꢀV\VWHPꢀ¿OHVꢀDQGꢀFDFKH” (does not erase any data)
- “Reset Settings” (resets all user settings)
- “Format Hard DrivenꢁꢆGTCUGꢁCNNꢁFCVCꢅꢁOGFKCꢁÒNGUꢅꢁCPFꢁNKEGPUGUꢈ
- “Full ReinitializationnꢁꢆGTCUGꢁCNNꢁFCVCꢅꢁOGFKCꢁÒNGUꢅꢁNKEGPUGUꢁCPFꢁUGVVKPIUꢈ
In the event that your ARCHOS freezes or does not respond anymore, try to
reset it (see: Restarting / Resetting your ARCHOS).
If this does not work or if you cannot access the Repair and Formatting Tools,
you can try a system recovery (see: System Recovery).
TV+
MANUAL V1.0
TECHNICAL SPECIFICATIONS > P. 77
TECHNICAL SPECIFICATIONS
HARD DRIVE CAPACITY
• See packaging.
VIDEO PLAYBACK**
• MPEG-4(4) (ASP@L5 AVI, up to DVD resolution)
• WMV (MP@ML, up to DVD resolution)
• With optional software plug-ins (available on www.archos.com):
- Podcast plug-in: H.264 up to DVD resolution and AAC sound.
- %KPGOCꢁ2NWIꢊKPꢀꢁ/2')ꢊꢋꢁ/2"/.ꢁWRꢁVQꢁꢃꢄꢁ/DRUꢁꢆWRꢁVQꢁ&8&ꢁTGUQNWVKQPꢈꢁCPFꢁ
AC3 stereo sound.
AUDIO PLAYBACK**
• 5VGTGQꢁ/2ꢉꢁFGEQFKPIꢁ"ꢁꢉꢄꢊꢉꢋꢄꢁ-DKVUꢇUꢁ%$4ꢁꢌꢁ8$4ꢅꢁ9/#ꢅꢁ2TQVGEVGFꢁ9/#ꢅꢁ9#8ꢁ
(PCM/ADPCM).
• With optional software plug-ins (available on www.archos.com):
(5)
- AAC ꢁUVGTGQꢁCWFKQꢁÒNGU
- #%ꢉꢁUVGTGQꢁCWFKQꢁÒNGU
PHOTO VIEWER***
• JPEG, BMP, PNG, GIF
PDF VIEWER
• Reads PDF documents (may not implement all PDF features)
(6)
VIDEO RECORDING
• 4GEQTFUꢁ065%ꢇ2#.ꢇ5'%#/ꢁVQꢁ/2')ꢊꢑꢁ52ꢁÒNGUꢁYKVJꢁ#&2%/ꢁUVGTGQꢁUQWPFꢅꢁ8)#ꢁ
TGUQNWVKQPꢁꢆꢐꢑꢄꢁZꢁꢑꢒꢄꢈꢁ"ꢁꢉꢄꢁQTꢁꢋꢎꢁHꢇUꢅꢁKPꢁ#8+ꢁHQTOCVꢂꢁ
AUDIO RECORDING
• In WAV (IMA ADPCM or PCM) format.
INTERFACES
• 75$ꢁꢋꢂꢄꢁ*KIJꢊ5RGGFꢁ&GXKEGꢁꢆEQORCVKDNGꢁ75$ꢁꢃꢂꢃꢈꢀꢁ/CUUꢁ5VQTCIGꢁ%NCUUꢁꢆ/5%ꢈꢁCPFꢁ
Media Transport Protocol (MTP).
• 75$ꢁꢋꢂꢄꢁ*QUVꢁꢀꢁ/CUUꢁ5VQTCIGꢁ%NCUUꢁꢆ/5%ꢈꢁCPFꢁ2KEVWTGꢁ6TCPUHGTꢁ2TQVQEQNꢁꢆ262ꢈꢁ
TV+
MANUAL V1.0
TECHNICAL SPECIFICATIONS > P. 78
CONNECTIONS
• 9K(KꢁꢆꢒꢄꢋꢂꢃꢃIꢈꢁEQPPGEVKQPꢂꢁ1RVKQPCNꢁ9GDꢁ$TQYUGTꢁRNWIꢊKPUꢁHQTꢁYGDꢁDTQYUKPIꢁ
(available on www.archos.com)
• INPUTS :
- Audio: stereo analog
- Video: composite, S-video, RGB,YPbPr (component)
- Miscellaneous: Ethernet, USB slave (USB B), USB host ( USB A), infrared receptor
for remote control, and DC-in
• OUTPUTS:
- Audio: stereo analog, SPDIF (RCA type)
- Video: composite, S-video, RGB,YPbPr, and HDMI
- Miscellaneous: infrared emitter, AV Switch
POWER SOURCE
• External: Power supply
FIRMWARE
• &GXKEGꢁCWVQOCVKECNN[ꢁFQYPNQCFUꢁNCVGUVꢁÒTOYCTGꢁWRFCVGU
PACKAGE INCLUDES
• For North America: remote control, power supply (US plug), 2 audio RCA/RCA
cables, 2 x S-Video cables, User guide, Connection sheet, Legal and safety notice,
warranty sheet
• For Europe: remote control, power supply (EU/UK plugs), RCA/SCART Output
cable, RCA/SCART Input cable, User guide, Connection sheet, Legal and safety no-
tice, warranty sheet
ꢍꢍꢁ%GTVCKPꢁDKVTCVGUꢅꢁTGUQNWVKQPUꢅꢁCPFꢇQTꢁÒNGꢁXCTKCVKQPUꢁOC[ꢁPQVꢁDGꢁEQORCVKDNGꢂ
ꢍꢍꢍꢁ%GTVCKPꢁTGUQNWVKQPUꢁCPFꢁÒNGꢁUK\GUꢁOC[ꢁPQVꢁDGꢁEQORCVKDNGꢂ
(4)ꢁꢆ/2')ꢊꢑꢀꢁ+51ꢁUVCPFCTFꢁD[ꢁ/QXKPIꢁ2KEVWTGꢁ'ZRGTVUꢁ)TQWRꢓꢁ#8+ꢀꢁCWFKQꢇXKFGQꢁÒNGꢁEQPVCKP-
er by Microsoft) without GMC and Quarter Pixel and WMV (including protected WMV).
(5)ꢁ&QGUꢁPQVꢁTGCFꢁ##%ꢁRTQVGEVGFꢁÒNGUꢂ
(6)ꢁ/CETQXKUKQP‚ꢊRTQVGEVGFꢁÒNGUꢁECPꢁQPN[ꢁDGꢁRNC[GFꢁDCEMꢁQPꢁVJGꢁ#4%*15ꢁVJCVꢁETG-
CVGFꢁVJGOꢅꢁCPFꢁPQVꢁQPꢁCꢁEQORWVGTꢂꢁ6JGꢁRNC[DCEMꢁQHꢁRTQVGEVGFꢁÒNGUꢁKUꢁCNUQꢁNKOKVGFꢁVQꢁVJGꢁ
HDMI/HDCP video output (in this case, your TV must have an HDMI/HDCP input con-
nector). It cannot be displayed on a television using any other video output type.
TV+
MANUAL V1.0
TECHNICAL SUPPORT INFORMATION > P. 79
TECHNICAL SUPPORT INFORMATION
0GGFꢁ*GNR!ꢁ;QWꢁECPꢁÒPFꢁVJGꢁKPHQTOCVKQPꢁ[QWꢁPGGFꢀ
• On our Website: see the frequently asked questions section on
support.
• 7ꢂ5ꢂꢁꢌꢁ%CPCFCꢀꢁ%CNNꢁꢒꢔꢔꢊꢉꢄꢄꢊꢒꢒꢔꢏꢁꢆVQNNꢁHTGGꢈꢂ
Allbrandsandproduct namesareregisteredtrademarksandthepropertyoftheirrespec-
tive owners. Windows Media® and Windows® are trademarks or registered trademarks
QHꢁ/KETQUQHVꢁ%QTRQTCVKQPꢁKPꢁVJGꢁ7PKVGFꢁ5VCVGUꢁCPFꢇQTꢁQVJGTꢁEQWPVTKGUꢂꢁ5RGEKÒECVKQPUꢁ
are subject to change without notice. Errors or omissions excepted. Images and illus-
trations may not always match contents. All the information contained in this guide
was correct at the time of publication.
%12;4+)*6ꢁ#4%*15ꢁ~ꢁꢋꢄꢄꢔꢂꢁ#NNꢁTKIJVUꢁTGUGTXGFꢂ
|