Alpine CDM 9823 User Manual

R
EN  
FR  
ES  
CDM-9823  
CDM-9821  
FM/AM Compact Disc Receiver  
• OWNER'S MANUAL  
Please read before using this equipment.  
• MODE D'EMPLOI  
Veuillez lire avant d’utiliser cet appareil.  
• MANUAL DE OPERACIÓN  
Léalo antes de utilizar este equipo.  
ALPINE ELECTRONICS MARKETING, INC.  
1-1-8 Nishi Gotanda,  
Shinagawa-ku, Tokyo 141-0031, Japan  
Phone 03-5496-8231  
ALPINE ELECTRONICS OF AUSTRALIA PTY. LTD.  
6-8 Fiveways Boulevarde Keysborough,  
Victoria 3173, Australia  
ALPINE ELECTRONICS FRANCE S.A.R.L.  
(RCS PONTOISE B 338 101 280)  
98, Rue de la Belle Etoile, Z.I. Paris  
Nord II, B.P. 50016, 95945 Roissy  
Charles de Gaulle Cedex, France  
Phone 01-48638989  
Phone 03-9769-0000  
ALPINE ELECTRONICS OF AMERICA, INC.  
19145 Gramercy Place, Torrance,  
California 90501, U.S.A.  
ALPINE ELECTRONICS GmbH  
Kreuzerkamp 7, 40878 Ratingen,  
Germany  
ALPINE ITALIA S.p.A.  
Viale C. Colombo 8, 20090 Trezzano  
Sul Naviglio (MI), Italy  
Phone 1-800-ALPINE-1 (1-800-257-4631)  
Phone 02102-4550  
ALPINE ELECTRONICS OF CANADA, INC.  
7300 Warden Ave., Suite 203, Markham,  
Ontario L3R 9Z6, Canada  
ALPINE ELECTRONICS OF U.K. LTD.  
Alpine House  
Phone 02-484781  
Fletchamstead Highway,  
Coventry CV4 9TW, U.K.  
Phone 0870-33 33 763  
ALPINE ELECTRONICS DE ESPAÑA, S.A.  
Portal de Gamarra 36, Pabellón, 32  
01013 Vitoria (Alava) - APDO 133,  
Spain  
Phone 1-800-ALPINE-1 (1-800-257-4631)  
Phone 945-283588  
Designed by ALPINE Japan  
Meiyi Printing Factory, Dalian, China  
No. 28 Chang Qing Street, Xi Gang District, Dalian, China  
Printed in China (S)  
68P02294K96-O  
ENGLISH  
Contents  
Operating Instructions  
CD Player Operation  
Inserting/Ejecting Disc ................................... 10  
Normal Play and Pause ................................... 10  
Music Sensor (Skip)........................................ 11  
Fast Forward and Backward ........................... 11  
Repeat Play ..................................................... 11  
M.I.X. (Random Play) .................................... 11  
Scanning Programs ......................................... 11  
Controlling CD Changer (Optional) ............... 11  
Information  
WARNING  
WARNING.................................................. 2  
CAUTION ................................................... 2  
PRECAUTIONS ......................................... 2  
Basic Operation  
Detaching the Front Panel................................. 4  
Attaching the Front Panel ................................. 4  
Initial System Start-Up ..................................... 4  
Turning Power On and Off ............................... 4  
Subwoofer On and Off ...................................... 4  
Adjusting Volume/Balance (Between Left and  
Right)/Fader (Between Front and Rear) ........ 5  
Turning Loudness On/Off (CDM-9821 only) ... 5  
Audio Mute Function ........................................ 5  
BBE Mode On/Off (CDM-9823 only).............. 5  
Setting the AUX Mode...................................... 5  
Displaying Time................................................ 6  
Setting Time ...................................................... 6  
Setting the Bass Control ................................... 6  
Setting the Treble Control ................................. 7  
Setting the Bass Type ........................................ 7  
Radio Operation  
In Case of Difficulty ....................................... 12  
Specifications .................................................. 13  
Installation and Connections  
Warning ........................................................... 14  
Caution ............................................................ 14  
Precautions ...................................................... 14  
Installation ...................................................... 15  
Connections .................................................... 16  
LIMITED WARRANTY  
Changing the Radio Frequencies for each  
Country .......................................................... 8  
Manual Tuning .................................................. 8  
Automatic Seek Tuning .................................... 8  
Manual Storing of Station Presets .................... 8  
Automatic Memory of Station Presets .............. 9  
Tuning to Preset Stations .................................. 9  
1-EN  
WARNING  
DO NOT PLACE HANDS, FINGERS OR FOREIGN  
WARNING  
OBJECTS IN INSERTION SLOTS OR GAPS.  
Doing so may result in personal injury or damage to the  
product.  
This symbol means important instructions.  
Failure to heed them can result in serious  
injury or death.  
CAUTION  
DO NOT OPERATE ANY FUNCTION THAT TAKES  
YOUR ATTENTION AWAY FROM SAFELY DRIVING  
YOUR VEHICLE.  
Any function that requires your prolonged attention  
should only be performed after coming to a complete stop.  
Always stop the vehicle in a safe location before  
performing these functions. Failure to do so may result in  
an accident.  
This symbol means important instructions.  
Failure to heed them can result in injury or  
material property damage.  
HALT USE IMMEDIATELY IF A PROBLEM APPEARS.  
Failure to do so may cause personal injury or damage to  
the product. Return it to your authorized Alpine dealer or  
the nearest Alpine Service Center for repairing.  
KEEP THE VOLUME AT A LEVEL WHERE YOU CAN  
STILL HEAR OUTSIDE NOISE WHILE DRIVING.  
Failure to do so may result in an accident.  
PRECAUTIONS  
Temperature  
MINIMIZE DISPLAY VIEWING WHILE DRIVING.  
Viewing the display may distract the driver from looking  
ahead of the vehicle and cause an accident.  
Be sure the temperature inside the vehicle is between  
+60°C (+140°F) and –10°C (+14°F) before turning your  
unit on.  
DO NOT DISASSEMBLE OR ALTER.  
Doing so may result in an accident, fire or electric shock.  
Moisture Condensation  
You may notice the CD playback sound wavering due to  
condensation. If this happens, remove the disc from the  
player and wait about an hour for the moisture to  
evaporate.  
USE ONLY IN CARS WITH A 12 VOLT NEGATIVE  
GROUND.  
(Check with your dealer if you are not sure.) Failure to do  
so may result in fire, etc.  
Damaged Disc  
Do not attempt to play cracked, warped, or damaged  
discs. Playing a bad disc could severely damage the  
playback mechanism.  
KEEP SMALL OBJECTS SUCH AS BATTERIES OUT  
OF THE REACH OF CHILDREN.  
Swallowing them may result in serious injury. If  
swallowed, consult a physician immediately.  
Maintenance  
If you have problems, do not attempt to repair the unit  
yourself. Return it to your Alpine dealer or the nearest  
Alpine Service Station for servicing.  
USE THE CORRECT AMPERE RATING WHEN  
REPLACING FUSES.  
Failure to do so may result in fire or electric shock.  
DO NOT BLOCK VENTS OR RADIATOR PANELS.  
Doing so may cause heat to build up inside and may result  
in fire.  
USE THIS PRODUCT FOR MOBILE 12V APPLICATIONS.  
Use for other than its designed application may result in  
fire, electric shock or other injury.  
2-EN  
Installation Location  
Never Attempt the Following  
Make sure the CDM-9823/CDM-9821 will not be  
installed in a location subjected to:  
Do not grip or pull out the disc while it is being pulled  
back into the player by the automatic reloading  
mechanism.  
Do not attempt to insert a disc into the unit when the unit  
power is off.  
Direct sun and heat  
High humidity and water  
Excessive dust  
Excessive vibrations  
Handling the Detachable Front Panel  
Do not expose to rain or water.  
Do not drop or apply shock.  
Correct Handling  
Inserting Discs  
Do not drop the disc while handling. Hold the disc so you  
will not leave fingerprints on the surface. Do not affix  
tape, paper, or gummed labels to the disc. Do not write on  
the disc.  
Your player accepts only one disc at a time for playback.  
Do not attempt to load more than one disc.  
Make sure the label side is facing up when you insert the  
disc. Your player will automatically eject any disc that is  
inserted incorrectly. If the player continues to eject a  
correctly inserted disc, push the Reset switch (located  
behind the detachable front panel) with a pointed object  
such as a ball-point pen.  
CORRECT  
Playing a disc while driving on a very bumpy road may  
result in skips, but this will not scratch the disc or damage  
the player.  
INCORRECT  
CORRECT  
New Discs  
As a protective measure to prevent the CD from jamming,  
the CD player will automatically eject discs with irregular  
surfaces or inserted incorrectly. When a new disc is  
inserted into the player and ejected after initial loading,  
using your finger, feel around the inside of the center hole  
and outside edge of the disc. If you feel any small bumps  
or irregularities, this could inhibit proper loading of the  
disc. To remove the bumps, rub the inside edge of the hole  
and outside edge of the disc with a ball-point pen or other  
such instrument, then insert the disc again.  
Disc Cleaning  
Fingerprints, dust, or soil on the surface of the disc could  
cause the CD player to skip. For routine cleaning, wipe  
the playing surface with a clean, soft cloth from the centre  
of the disc to the outer edge. If the surface is heavily  
soiled, dampen a clean, soft cloth in a solution of mild  
neutral detergent before cleaning the disc.  
New  
Disc  
Center  
Hole  
Center  
Hole  
Bumps  
Outside  
(Bumps)  
Disc Accessories  
There are various accessories available on the market for  
protecting the disc surface and improving sound quality.  
However, most of them will influence the thickness and/or  
diameter of the disc. Using such accessories can cause the  
disc to be out of standard specifications and may create  
operational problems. We recommend not using these  
accessories on discs played in Alpine CD players.  
Irregular Shaped Discs  
Be sure to use round shape discs only for this unit and  
never use any special shape discs.  
Use of special shape discs may cause damage to the  
mechanism.  
Transparent Sheet  
Disc Stabilizer  
3-EN  
Basic Operation  
Initial System Start-Up  
Immediately after installing or applying power to the  
unit, it should be initialized. To do this, first, remove  
the detachable front panel. Behind the front panel, to  
the right of the connector, there is a small hole.  
Using a ball-point pen or other pointed object, press  
the RESET switch mounted behind this hole to  
complete the initialization procedure.  
SOURCE/  
POWER  
BAND  
MODE/Rotary encoder  
1
g f  
MUTE F/SETUP  
RESET switch  
Turning Power On and Off  
Detaching the Front Panel  
1
Press the SOURCE/POWER button to turn on  
the unit.  
1
2
3
Press and hold the SOURCE/POWER button for  
more than 3 seconds to turn off the power.  
NOTE  
The unit can be turned on by pressing any other button  
except the eject c and DISP button.  
Press the  
(Release) button at lower left corner  
until the front panel pops out.  
Press and hold the SOURCE/POWER button for  
more than 3 seconds to turn off the unit.  
Grasp the left side of the front panel and pull it  
out.  
NOTE  
The very first time the power is turned on, the unit will be  
in the tuner mode at volume level 12, with BBE* or the  
LOUD** function on.  
* CDM-9823 only.  
** CDM-9821 only.  
NOTES  
The front panel may become hot in normal usage  
(especially the connector terminals), this is not  
malfunction.  
To protect the front panel, place it in the supplied  
carrying case.  
Subwoofer On and Off  
1
2
3
4
Press and hold the F/SETUP button for at least 3  
seconds.  
Attaching the Front Panel  
Press the g or f button to select the SUB  
( Subwoofer) mode.  
1
First, insert the right side of the front panel into  
the main unit. Align the 2 small holes on the front  
panel with the 2 projections on the main unit.  
Press the BAND button to select Subwoofer ON  
or OFF.  
2
Push the left side of the front panel until it locks  
firmly into the main unit.  
After setting is completed, press the F/SETUP  
button to return to normal mode.  
2
NOTES  
Initial mode is "Subwoofer ON."  
1
Set to "Subwoofer OFF" unless the subwoofer is used.  
When the subwoofer is turned on, the subwoofer  
output level can be adjusted. For more details, refer to  
the Adjusting Volume/Balance/Fader.  
NOTE  
Before attaching the front panel, make sure that there is  
no dirt or dust on the connector terminals and no foreign  
object between the front panel and the main unit.  
4-EN  
BBE Mode On/Off  
(CDM-9823 only)  
Adjusting Volume/Balance  
(Between Left and Right)/Fader  
(Between Front and Rear)  
The BBE (Barcus Berry Electronics) processor  
installed in this unit is designed to correct the  
phase distortion inherent in most loudspeaker  
designs. Ensuring the phase integrity of the signal  
driving the speakers improves the accurate  
reproduction of the sound.  
1
Press the MODE (Rotary encoder) repeatedly  
to choose the desired mode.  
Each press changes the modes as follows:  
Volume Subwoofer*  
Fader Balance ←  
Volume  
: 0 ~ 35  
1
Press and hold the Rotary encoder for at least 2  
seconds to turn on the BBE mode.  
Each press toggles between the BBE on and off  
modes.  
Subwoofer : 0 ~ +15  
Balance  
: BL+8 ~ BR+8  
: FR+8 ~ FF+8  
Fader  
Setting the AUX Mode  
NOTES  
If the Rotary encoder is not pressed within 5 seconds  
after selecting the BALANCE or FADER mode, the  
unit automatically returns to the VOLUME mode.  
* When the subwoofer is set to ON, the level of the  
subwoofer can be adjusted.  
You can input TV/video sound by connecting an  
optional "M-Bus V-Link" (M-Bus/RCA interface  
cable KCM-122B) to this component.  
2
Turn the Rotary encoder until the desired sound  
is obtained in each mode.  
1
2
3
4
5
Press and hold the F/SETUP button for at least 3  
seconds.  
Press the g or f button to select the AUX  
mode.  
Turning Loudness On/Off  
(CDM-9821 only)  
Press the BAND button to toggle the mode  
between AUX ON and AUX OFF.  
Loudness introduces a special low- and high-  
frequency emphasis at low listening levels. This  
compensates for the ear's decreased sensitivity to  
bass and treble sound.  
Press the F/SETUP button to return to normal  
mode.  
To adjust the volume, etc., first press the  
SOURCE/POWER button and select the AUX  
mode, then make the necessary adjustment.  
1
Press and hold the Rotary encoder for at least  
2 seconds to activate or deactivate the loudness  
mode.  
The display shows "LOUD" when the loudness  
mode is activated.  
TUNER CD AUX  
NOTES  
When AUX ON is selected, a CD Changer cannot be  
used.  
Audio Mute Function  
This unit is not XM compatible. However, by using the  
optional XME-T210RF, XM Satellite Radio can be  
listened to from this unit. The XME-T210RF’s  
Activating this function will instantly lower the  
volume level by 20 dB.  
controller must be used to control the XM functions.  
1
Press the MUTE button to activate the MUTE  
mode. The audio level will decrease by about  
20 dB.  
Pressing the MUTE button again will bring the  
audio back to its previous level.  
5-EN  
Basic Operation  
Setting the Bass Control  
You can change the Bass Frequency emphasis to  
create your own tonal preference.  
BAND  
Rotary encoder  
1
Press the CENTER f button to select the Bass  
setting mode.  
Each press changes the modes as follows:  
Bass setting  
mode  
Treble setting  
mode  
Normal  
mode  
g
f
CENTER f  
DISP  
2-1 Setting the Bass Center Frequency:  
Press the g or f button to select the  
desired Bass center frequency.  
60Hz 80Hz 100Hz 200Hz  
Displaying Time  
Emphasizes the displayed Bass frequency  
ranges.  
1
Press the DISP button repeatedly until the  
clock time is displayed.  
2-2 Setting the Bass Band Width (Q-Factor):  
Press the BAND button to select the desired  
Bass Band Width.  
Each press changes the modes as follows:  
Radio mode  
1
2
3
4
Clock priority  
mode  
Radio frequency  
........................  
(Narrow)  
(Wide)  
CD Player and Changer modes  
Changes the displayed frequency's band width to  
narrow or wide.  
Clock priority  
mode  
Track No.  
mode  
Playing time  
mode  
2-3 Setting the Bass Level:  
Turn the Rotary encoder to select the desired  
Bass Level (-7~+7).  
NOTE  
Selecting any tuner or CD function while in the clock  
priority mode will interrupt the time display  
momentarily. The function selected will be displayed for  
about 5 seconds before the time returns to the display.  
You can emphasize or weaken the bass  
frequency.  
NOTES  
If no buttons are pressed within 15 seconds, the Bass  
control setting will be turned off automatically.  
The settings of the Bass Level will be individually  
memorized for each source (FM, AM and CD) until the  
setting is changed. The Bass frequency and Bass Band  
Width settings adjusted for one source are effective for  
all other sources (FM, AM and CD).  
* Selecting any of the "Setting the Bass Types" (TYPE 1  
through 3), temporarily replaces the custom settings  
you have made above.  
Setting Time  
1
In the Clock priority mode, press and hold the  
DISP button for at least 3 seconds while the  
time is displayed. The time indication will blink.  
2
3
4
Turn the Rotary encoder to adjust the hours  
while the time indication is blinking.  
When the hour has been adjusted, press the  
Rotary encoder.  
Turn the Rotary encoder to adjust the minutes  
while the time indication is blinking. The time is  
automatically set 5 seconds after the minute  
adjustment. The time can also be manually set by  
pressing the Rotary encoder.  
6-EN  
Setting the Bass Type  
Setting the Treble Control  
This function allows for 3 different Bass type  
settings. Select the one that appeals to you the  
most.  
You can change the Treble Frequency emphasis  
to create your own tonal preference.  
1
Press the CENTER f button to select the Treble  
setting mode.  
Each press changes the modes as follows:  
1
2
Press and hold the CENTER f button for at least  
2 seconds to set the Bass Type.  
Select the desired type (1 through 3) by pressing  
the g or f button within 15 seconds.  
Type 1 will sound best if you have a subwoofer  
in your system. Use Type 2 or 3 if you are using  
small diameter speakers.  
Bass setting  
mode  
Treble setting  
mode  
Normal  
mode  
2-1 Setting Treble frequency:  
Press g or f button to select the desired  
Treble center frequency.  
3
Press the CENTER f button for at least 2  
seconds to return to the normal mode.  
10kHz 12.5kHz 15kHz 17.5kHz  
Emphasizes the displayed Treble frequency  
ranges.  
NOTES  
“Bass Center Frequency” and “Bass Band Width”  
previously set are replaced when selecting TYPE 1  
through 3. When Bass Type is OFF, your previous  
settings are restored.  
2-2 Setting Treble Level:  
Turn the Rotary encoder to select the desired  
Treble Level (-7~+7).  
You can emphasize the treble frequency.  
NOTES  
If no buttons are pressed within 15 seconds, the Treble  
control setting will be turned off automatically.  
The settings of the Treble Level will be individually  
memorized for each source (FM, AM and CD) until the  
setting is changed. The Treble frequency settings  
adjusted for one source are effective for all other  
sources (FM, AM and CD).  
7-EN  
Radio Operation  
Automatic Seek Tuning  
1
Press the SOURCE/POWER button until a radio  
frequency appears in the display.  
SOURCE/  
POWER  
TUNE/A.ME BAND  
2
Press the BAND button repeatedly until the  
desired radio band is displayed.  
Each press changes the band:  
F1(FM1) F2(FM2) AM  
3
4
Press the TUNE/A.ME button to illuminate the  
DX and SEEK indicators in the display.  
With the DX (Distance) mode activated, both  
strong and weak stations will be tuned in the  
Auto-Seek operation.  
Press again to return to the local mode. The DX  
indicator will turn off and the SEEK indicator will  
remain illuminated. Now, only strong stations will  
be tuned.  
F/SETUP Preset buttons (1 through 6)  
g
f
Changing the Radio Frequencies  
for each Country  
For customers not living in North America, change the  
radio frequencies as follows.  
1
2
3
Press and hold the F/SETUP button for at least 3  
Press the g or f button to automatically  
seek for a station downward or upward  
respectively.  
The unit will stop at the next station it finds.  
Press the same button again to seek the next  
station.  
seconds.  
Choose the area mode by pressing the g or  
f button.  
Choose either A-1 or A-2 by pressing the BAND  
button.  
A-1: Radio frequencies for North America  
A-2: Other Radio frequencies  
Manual Storing of Station Presets  
NOTE  
The stored radio stations will be cleared every time you  
change the setting.  
1
Select the radio band and tune in a desired radio  
station you wish to store in the preset memory.  
Manual Tuning  
2
Press and hold the Preset buttons (1 through  
6) that you want to store the station on for at  
least 2 seconds.  
The selected station is stored. The display shows  
the band, preset No. and station frequency  
memorized.  
1
2
Press the SOURCE/POWER button until a radio  
frequency appears in the display.  
Press the BAND button repeatedly until the  
desired radio band is displayed.  
Each press changes the band:  
3
Repeat the procedure to store up to 5 other  
stations onto the same band.  
F1(FM1) F2(FM2) AM  
To use this procedure for other bands, simply  
select the band desired and repeat the  
procedure.  
A total of 18 stations can be stored in the preset  
memory (6 stations for each band; FM1, FM2  
and AM ).  
3
4
Press the TUNE/A.ME button repeatedly until  
"DX SEEK" and "SEEK" disappear from the  
display.  
NOTE  
The initial mode is DX SEEK.  
NOTE  
Press the g or f button to move downward  
or upward one step respectively until the desired  
station frequency is displayed.  
If you store a station in a preset memory which already  
has a station, the current station will be cleared and  
replaced with the new station.  
NOTE  
The ST indicator or STEREO indicator appears on the  
display when a Stereo FM station is tuned in.  
8-EN  
Automatic Memory of Station  
Presets  
1
2
3
Press the SOURCE/POWER button to select the  
radio mode.  
Press the BAND button repeatedly until the  
desired radio band is displayed.  
Press and hold the TUNE/A. ME button for at  
least 2 seconds.  
The frequency on the display continues to  
change while the automatic memory is in  
progress. The tuner will automatically seek and  
store 6 strong stations in the selected band. They  
will be stored into presets 1 to 6 buttons in order  
of signal strength.  
When the automatic memory has been  
completed, the tuner goes to the station stored in  
the preset location No. 1.  
NOTE  
If no stations are stored, the tuner will return to the  
original station you were listening to before the auto  
memory procedure began.  
Tuning to Preset Stations  
1
2
3
Press the SOURCE/POWER button to select the  
radio mode.  
Press the BAND button repeatedly until the  
desired band is displayed.  
Press the station Preset button that has your  
desired radio station in memory.  
The display shows the band, preset number and  
frequency of the station selected.  
9-EN  
CD Player Operation  
Inserting/Ejecting Disc  
Disc Select buttons  
SOURCE/  
1
Insert a CD half way into the slot with the label  
side facing up. The player automatically draws  
the disc into the disc compartment.  
(1 through 6)  
POWER  
-/J  
c
g
f
4
5
6
The Disc indicator appears to show that a disc is  
loaded.  
NOTE  
Three-inch (8cm) CD's can be used.  
2
Press the c(Eject) button when you want to  
eject the CD.  
About playable media.  
Use only compact discs with the label side showing the  
NOTES  
CD logo marks below.  
If the CD is not removed for several seconds after it  
has been ejected, the player automatically draws the  
CD into the compartment to protect the CD.  
Do not insert or remove a CD forcibly when loading  
or ejecting a CD, as malfunction may result.  
If you use unspecified compact discs, correct  
performance cannot be guaranteed.  
You can play CD-Rs (CD-Recordable)/CD-RWs (CD-  
ReWritable) for audio use on this unit.  
However, you cannot play CD-Rs/CD-RWs containing  
MP3 formatted audio files.  
Normal Play and Pause  
1
Insert a CD. The CD player begins playback from  
the first track on the disc.  
Some of the following CDs may not play on this unit:  
Flawed CDs, CDs with fingerprints, CDs exposed to  
extreme temperatures or sunlight (e.g., left in the car  
or this unit), CDs recorded under unstable conditions,  
CDs not designed for audio use, CDs on which a  
recording failed a re-recording was attempted, copy-  
protected CDs which do not conform to the audio CD  
industry standard.  
The display shows the track number. When the  
last track is played back the player returns to the  
first track.  
On handling Compact Discs (CD/CD-R/  
CD-RW)  
Do not touch the surface.  
Do not expose the disc to direct sunlight.  
Do not affix stickers or labels and do not write on the  
surface.  
If a CD is already loaded in the CD player, press  
the SOURCE button to select the CD mode.  
Clean the disc when it is dusty.  
Make sure that there are no bumps around the disc.  
Do not use commercially available disc accessories.  
2
Press the -/J button to temporarily stop CD  
playback.  
To resume playback, press the -/J button  
again.  
Do not leave the disc in the car or the unit for  
a long time. Never expose the disc to direct  
sunlight. Heat and humidity may damage the CD  
and you may not be able to play it again.  
To customers using CD-R/CD-RW  
If a CD-R/CD-RW cannot be played back, make sure  
close session (finalization) has been performed.  
Finalize the CD-R/CD-RW if necessary, and attempt  
playback again.  
10-EN  
Music Sensor (Skip)  
Scanning Programs  
1
Momentarily press the g button once during  
CD play to return to the beginning of the current  
track. If you wish to access the beginning of a  
track further back, repeatedly press until you  
reach the desired track.  
1
Press the 6 (  
mode.  
The first 10 seconds of each track will be played  
back in succession.  
) button to activate the Scan  
To stop scanning, press the 6 (  
) button and  
Press the f button once to advance to the  
beginning of the next track. If you wish to access  
the beginning of a track further ahead, press  
repeatedly until the desired track is reached.  
deactivate the Scan mode.  
NOTE  
In case a 6-disc CD changer is connected :  
In CD changer mode, press the "F" button to illuminate  
the "FUNC" indicator and go to step 1.  
NOTE  
The music sensor feature is functional in the play or  
pause mode.  
Controlling CD Changer (Optional)  
Fast Forward and Backward  
If an optional Alpine 6-disc CD Changer is  
connected to the 8-pin DIN connector (M-Bus) of  
the CDM-9823/CDM-9821, you can control the  
CD changer using the CDM-9823/CDM-9821.  
1
Press and hold the g or f button to quickly  
move backward or forward until you reach the  
desired section of the track.  
NOTE  
The CD controls designed specifically for CD changer  
operation are functional only when a CD Changer is  
interconnected with the CDM-9823/CDM-9821.  
Repeat Play  
1
Press the 4 (  
the track being played.  
) button to play back repeatedly  
1
2
Press the SOURCE/POWER button to activate  
the CHANGER mode.  
The REPEAT indicator appears and the track will  
be played repeatedly.  
Press the 4 (  
deactivate the repeat play.  
) button again and select OFF to  
Press the Disc Select buttons (1 through 6)  
corresponding to one of the discs loaded in the  
CD Changer. The selected disc number appears  
in the display and CD playback starts.  
NOTE  
If a CD Changer is connected and the REPEAT ALL  
mode is selected, the unit repeatedly plays back all tracks  
on the disc selected.  
NOTES  
After selecting the desired disc, you can operate in the  
same way as for the CDM-9823/CDM-9821 CD  
player.  
REPEAT REPEAT ALL (OFF)  
For details, please see the CD Player Operation  
section.  
If the "FUNC" indicator is illuminated the Disc Select  
buttons become nonfunctional.  
NOTE  
In case a 6-disc CD changer is connected :  
In CD changer mode, press the "F" button to illuminate  
the "FUNC" indicator and go to step 1.  
M.I.X. (Random Play)  
1
Press the 5 (  
mode.  
) button in the play or pause  
The M.I.X. indicator will illuminate and the tracks  
on the disc will be played back in a random  
sequence.  
To cancel M.I.X. play, press the 5 (  
) button  
again to turn off the M.I.X.  
NOTE  
In case a 6-disc CD changer is connected :  
In CD changer mode, press the "F" button to illuminate  
the "FUNC" indicator and go to step 1.  
11-EN  
Information  
CD  
In Case of Difficulty  
CD Player/Changer not functioning.  
• Out of operating temperature range +50˚C (+120˚F) for  
CD.  
- Allow the vehicle's interior (or trunk) temperature to  
cool.  
CD playback sound is wavering.  
• Moisture condensation in the CD Module.  
- Allow enough time for the condensation to evaporate  
(about 1 hour).  
If you encounter a problem, please turn the power off,  
then on again. If the unit is still not functioning  
normally, please review the items in the following  
checklist. This guide will help you isolate the problem  
if the unit is at fault. Otherwise, make sure the rest of  
your system is properly connected or consult your  
authorized Alpine dealer.  
CD insertion not possible.  
• A CD is already in the CD player.  
- Eject the CD and remove it.  
Basic  
No function or display.  
• The CD is being improperly inserted.  
- Make sure the CD is being inserted following  
instructions in the CD Player Operation section.  
Unable to fast forward or backward the CD.  
• The CD has been damaged.  
- Eject the CD and discard it; using a damaged CD in  
your unit can cause damage to the mechanism.  
CD playback sound skips due to vibration.  
• Improper mounting of the unit.  
- Securely re-mount the unit.  
• Disc is very dirty.  
- Clean the disc.  
• Disc has scratches.  
Vehicle's ignition is off.  
- If connected following instructions, the unit will not  
operate with the vehicle's ignition off.  
• Improper power lead connections.  
- Check power lead connections.  
• Blown fuse.  
- Check the fuse on the battery lead of the unit; replace  
with the proper value if necessary.  
• Internal micro-computer malfunctioned due to  
interference noise etc.  
- Press the RESET switch with a ball-point pen or other  
pointed article.  
- Change the disc.  
• The pick-up lens is dirty.  
Radio  
Unable to receive stations.  
• No antenna or open connection in cable.  
- Make sure the antenna is properly connected;  
replace the antenna or cable if necessary.  
Unable to tune stations in the seek mode.  
You are in a weak signal area.  
- Do not use a commercial available lens cleaner disc.  
Consult your nearest ALPINE dealer.  
CD playback sound skips without vibration.  
• Dirty or scratched disc.  
- Clean the disc; damaged disc should be replaced.  
Error displays (built-in CD player only)  
• Mechanical error  
- Make sure the tuner is in the DX mode.  
• If the area you are in is a primary signal area, the  
antenna may not be grounded and connected properly.  
- Check your antenna connections; make sure the  
antenna is properly grounded at its mounting location.  
• The antenna may not be the proper length.  
- Make sure the antenna is fully extended; if broken,  
replace the antenna with a new one.  
- Press the c button. After the error indication  
disappears, insert the disc again. If the above-  
mentioned solution does not solve the problem,  
consult your nearest ALPINE dealer.  
Broadcast is noisy.  
• The antenna is not the proper length.  
- Extend the antenna fully; replace it if it is broken.  
• The antenna is poorly grounded.  
- Make sure the antenna is grounded properly at its  
mounting location.  
12-EN  
Specifications  
Indication for CD  
– – – H  
FM TUNER SECTION  
Tuning Range  
Mono Usable Sensitivity  
50 dB Quieting Sensitivity  
87.7 – 107.9 MHz  
9.3 dBf (0.8 µV/75 ohms)  
13.5 dBf (1.3 µV/75 ohms)  
• Protective circuit is activated due to high temperature.  
- The indicator will disappear when the temperature  
returns to within operation range.  
Alternate Channel Selectivity 80 dB  
Signal-to-Noise Ratio  
Stereo Separation  
Capture Ratio  
65 dB  
35 dB  
2.0 dB  
– – – E  
• Mechanism error.  
1. Press the c button and eject the CD.  
If not ejecting, consult your Alpine dealer.  
2. When the error indication remains after ejecting,  
press the c button again.  
If the error indication still does not turn off after  
pressing the c button for a few times, consult your  
Alpine dealer.  
AM TUNER SECTION  
Tuning Range  
Sensitivity (IEC Standard)  
530 – 1,710 kHz  
22.5 µV/27 dB  
CD PLAYER SECTION  
Frequency Response  
Wow & Flutter (% WRMS) Bleow measurable limits  
Total Harmonic Distortion  
Dynamic Range  
5 – 20,000 Hz ( 1 dB)  
Note  
When the "- - - E" is displayed:  
0.008% (at 1 kHz)  
95 dB (at 1 kHz)  
105 dB  
In case that the disc cannot be ejected by pressing the c  
button, press the RESET switch (refer to page 4) and  
press the c button again.  
Signal-to-Noise Ratio  
Channel Separation  
If not ejecting, consult your Alpine dealer.  
85 dB (at 1 kHz)  
T – – –  
PICKUP  
Wave length  
Laser power  
795 nm  
CLASS I  
• No CD is inserted.  
- Insert a CD.  
GENERAL  
Power Requirement  
Indication for CD Changer  
– – – H  
14.4 V DC  
(11–16 V allowable)  
18 W RMS × 4*(CDM-  
9823 only)  
16W RMS × 4*(CDM-9821  
only)  
Power Output  
• Protective circuit is activated due to high temperature.  
- The indicator will disappear when the temperature  
returns to within operation range.  
*Primary amplifier ratings per CEA-2006 Standard  
• Power output: measured at 4 Ohms and 1% THD+N  
• S/N: 80 dBA (reference: 1 W into 4 Ohms)  
E - 01  
• Malfunction in the CD Changer.  
Maximum Pre-Output Voltage 2 V/10 k ohms  
- Consult your Alpine dealer. Press the magazine eject  
button and pull out the magazine.  
Check the indication. Insert the magazine again.  
If the magazine cannot be pulled out, consult your  
Alpine dealer.  
Bass  
14 dB at 60 Hz  
14 dB at 10 kHz  
1.5 kg (3 lbs. 5 oz)  
Treble  
Weight  
• Magazine ejection not possible.  
- Press the magazine eject button. If the magazine does  
not eject, consult your Alpine dealer.  
CHASSIS SIZE  
Width  
Height  
178 mm (7")  
50 mm (2")  
Depth  
160 mm (6-1/4")  
– – – –  
NOSEPIECE SIZE  
• No magazine is loaded into the CD Changer.  
- Insert a magazine.  
Width  
Height  
Depth  
170 mm (6–3/4")  
46 mm (1-13/16")  
20 mm (11/16")  
T – – –  
• No indicated disc.  
- Choose another disc.  
Due to continuous product improvement, specifications and  
design are subject to change without notice.  
E E E E  
• Misconnection or disconnection of CD Changer.  
- Check connection between CD Changer and control  
unit.  
13-EN  
Installation and Connections  
Before installing or connecting the unit, please  
read the following and pages 2 and 3 of this  
manual thoroughly for proper use.  
USE SPECIFIED ACCESSORY PARTS AND INSTALL  
THEM SECURELY.  
Be sure to use only the specified accessory parts. Use of  
other than designated parts may damage this unit  
internally or may not securely install the unit in place.  
This may cause parts to become loose resulting in hazards  
or product failure.  
Warning  
MAKE THE CORRECT CONNECTIONS.  
Failure to make the proper connections may result in fire  
or product damage.  
ARRANGE THE WIRING SO IT IS NOT CRIMPED OR  
PINCHED BY A SHARP METAL EDGE.  
USE ONLY IN CARS WITH A 12 VOLT NEGATIVE  
GROUND.  
(Check with your dealer if you are not sure.) Failure to do  
so may result in fire, etc.  
Route the cables and wiring away from moving parts (like  
the seat rails) or sharp or pointed edges. This will prevent  
crimping and damage to the wiring. If wiring passes  
through a hole in metal, use a rubber grommet to prevent  
the wire’s insulation from being cut by the metal edge of  
the hole.  
BEFORE WIRING, DISCONNECT THE CABLE FROM  
THE NEGATIVE BATTERY TERMINAL.  
Failure to do so may result in electric shock or injury due  
to electrical shorts.  
DO NOT INSTALL IN LOCATIONS WITH HIGH  
MOISTURE OR DUST.  
Avoid installing the unit in locations with high incidence  
of moisture or dust. Moisture or dust that penetrates into  
this unit may result in product failure.  
DO NOT ALLOW CABLES TO BECOME ENTANGLED  
IN SURROUNDING OBJECTS.  
Arrange wiring and cables in compliance with the manual  
to prevent obstructions when driving. Cables or wiring  
that obstruct or hang up on places such as the steering  
wheel, gear lever, brake pedals, etc. can be extremely  
hazardous.  
Precautions  
Be sure to disconnect the cable from the (–) battery post  
before installing your CDM-9823/CDM-9821. This will  
reduce any chance of damage to the unit in case of a  
short-circuit.  
DO NOT SPLICE INTO ELECTRICAL CABLES.  
Never cut away cable insulation to supply power to other  
equipment. Doing so will exceed the current carrying capacity  
of the wire and result in fire or electric shock.  
Be sure to connect the color coded leads according to the  
diagram. Incorrect connections may cause the unit to  
malfunction or damage to the vehicle’s electrical system.  
When making connections to the vehicle’s electrical  
system, be aware of the factory installed components  
(e.g. on-board computer). Do not tap into these leads to  
provide power for this unit. When connecting the CDM-  
DO NOT DAMAGE PIPE OR WIRING WHEN  
DRILLING HOLES.  
When drilling holes in the chassis for installation, take  
precautions so as not to contact, damage or obstruct pipes,  
fuel lines, tanks or electrical wiring. Failure to take such  
precautions may result in fire.  
98  
2
3/CDM-98  
2
1 to the fuse box, make sure the fuse for  
the intended circuit of the CDM-98  
2
3/CDM-98 1 has  
2
the appropriate amperage. Failure to do so may result in  
damage to the unit and/or the vehicle. When in doubt,  
consult your ALPINE dealer.  
The CDM-9823/CDM-9821 uses female RCA-type  
jacks for connection to other units (e.g. amplifier)  
having RCA connectors. You may need an adaptor to  
connect other units. If so, please contact your  
authorized ALPINE dealer for assistance.  
DO NOT USE BOLTS OR NUTS IN THE BRAKE OR  
STEERING SYSTEMS TO MAKE GROUND CONNECTIONS.  
Bolts or nuts used for the brake or steering systems (or  
any other safety-related system), or tanks should NEVER  
be used for installations or ground connections. Using  
such parts could disable control of the vehicle and cause  
fire etc.  
Be sure to connect the speaker (–) leads to the speaker  
(–) terminal. Never connect left and right channel  
speaker cables to each other or to the vehicle body.  
DO NOT INSTALL IN LOCATIONS WHICH MIGHT  
HINDER VEHICLE OPERATION, SUCH AS THE  
STEERING WHEEL OR GEARSHIFT.  
Doing so may obstruct forward vision or hamper  
movement etc. and results in serious accident.  
IMPORTANT  
Please record the serial number of your unit in the  
space provided below and keep it as a permanent  
record. The serial number plate is located on the  
bottom of the unit.  
Caution  
HAVE THE WIRING AND INSTALLATION DONE BY  
EXPERTS.  
The wiring and installation of this unit requires special  
technical skill and experience. To ensure safety, always  
contact the dealer where you purchased this product to  
have the work done.  
SERIAL NUMBER:  
INSTALLATION DATE:  
INSTALLATION TECHNICIAN:  
PLACE OF PURCHASE:  
14-EN  
3
Installation  
1
Mounting Sleeve  
(Included)  
Dashboard  
No Pressure Here  
Lock Pin  
Slide the CDM-9823/CDM-9821 into the dashboard.  
When the unit is in place, make sure the locking pins  
are fully seated in the down position. This can be  
done by pressing firmly in on the unit while pushing  
the locking pin down with a small screwdriver. This  
ensures that the unit is properly locked and will not  
accidentally come out from the dashboard. Install the  
Detachable Front Panel.  
No Pressure Here  
CDM-9823/CDM-9821  
Remove the Detachable Front Panel (refer to page  
4). Slide mounting sleeve from main unit. (see  
“Removal” on this page).  
Removal  
Slide the mounting sleeve into the dashboard.  
1 Remove the DETACHABLE FRONT PANEL.  
2 Use a small screwdriver (or similar tool) to push  
the locking pins to the "up" position (see above  
drawing). As each pin is unlocked, gently pull out  
on the unit to make sure it does not re-lock before  
unlocking the second pin.  
NOTE  
Please examine the installation. Make certain that no  
external pressure is applied to either the top of the unit  
or the removable nosepiece.  
3 Pull the unit out, keeping it unlocked as you do  
so.  
Screw  
2
Hex Nut (M5)  
<JAPANESE CAR>  
∗∗  
Bolt Stud  
Metal  
Mounting  
Strap  
Face Plate  
CDM-9823/CDM-9821  
Chassis  
Ground Lead  
Screws (M5 × 8)  
(Included)  
Reinforce the head unit with the metal mounting  
strap (not supplied). Secure the ground lead of the  
CDM-9823/CDM-9821  
unit to a clean metal spot using a screw ( ) already  
attached to the vehicle’s chassis.  
Ground Lead  
NOTE  
For the screw marked **, use an appropriate screw for  
the chosen mounting location.  
Mounting Bracket  
Connect each input lead coming from an amplifier or  
equalizer to the corresponding output lead coming  
from the left rear of the CDM-9823/CDM-9821.  
Connect all other leads of the CDM-9823/CDM-9821  
according to details described in the  
NOTE  
Secure the ground lead of the unit to a clean metal spot  
using a screw ( ) already attached to the vehicle's  
chassis.  
CONNECTlONS section.  
15-EN  
Installation and Connections  
Connections  
1
Antenna  
2
POWER ANT  
Blue  
To power antenna  
REMOTE  
TURN-ON  
3
Blue/White  
To amplifier or equalizer  
IGNITION  
BATTERY  
4
5
6
Red  
Ignition Key  
Yellow  
7
GND  
Black  
Battery  
u
Speakers  
Gray  
9
p
SPEAKER  
RIGHT  
FRONT  
Gray/  
Black  
;
i
Front right  
Violet/  
Black  
q
w
SPEAKER  
RIGHT  
REAR  
8
Violet  
Rear right  
Rear left  
Front left  
e
r
Green  
SPEAKER  
LEFT  
Green/  
Black  
REAR  
White/  
Black  
t
y
SPEAKER  
LEFT  
FRONT  
White  
Speakers  
Front Left  
o
Amplifier  
Front Right  
(CDM-9823 only)  
o
Rear or Subwoofers∗  
Amplifier  
a
CD Changer  
(Sold Separately)  
When Subwoofer is set to OFF: Output is from Rear speakers.  
When Subwoofer is set to ON: Output is from Subwoofer.  
For details on how to set the Subwoofer to ON/OFF, see “Subwoofer On and Off” on page 4.  
16-EN  
Antenna Receptacle  
Left Rear (+) Speaker Output Lead (Green)  
1
2
e
r
Power Antenna Lead (Blue)  
Connect this lead to the +B terminal of your power  
antenna, if applicable.  
Left Rear (–) Speaker Output Lead (Green/  
Black)  
Left Front (–) Speaker Output Lead (White/Black)  
Left Front (+) Speaker Output Lead (White)  
Front Output RCA Connectors (CDM-9823 only)  
t
y
u
u
Remote Turn-On Lead (Blue/White)  
Connect this lead to the remote turn-on lead of your  
amplifier or signal processor.  
3
4
Rear/Subwoofer RCA Connectors (CDM-9821  
only)  
RED is right and WHITE is left.  
Switched Power Lead (Ignition) (Red)  
Connect this lead to an open terminal on the vehicle's  
fuse box or another unused power source which  
provides (+)12V only when the ignition is turned on  
or in the accessory position.  
Rear/Subwoofer Output RCA Connectors (CDM-  
9823 only)  
RED is right and WHITE is left.  
i
Battery Lead (Yellow)  
Connect this lead to the positive (+) post of the  
vehicle's battery.  
5
6
RCA Extension Cable (Sold Separately)  
o
;
DIN Connector  
Connect this to the DIN connector on the CD  
Changer.  
Ground Lead (Black)  
Connect this lead to a good chassis ground on the  
vehicle. Make sure the connection is made to bare  
metal and is securely fastened using the sheet metal  
screw provided.  
DIN Extension Cable (Sold Separately)  
a
NOTE  
Older Alpine CD Changer came with standard, straight  
type DIN connectors. In installations where an L-type  
connector would simplify installation, the Alpine 491002  
Adaptor can be used (Sold Separately).  
Fuse Holder (10A)  
7
8
9
p
Power Supply Connector  
Right Front (+) Speaker Output Lead (Gray)  
Right Front (–) Speaker Output Lead (Gray/  
Black)  
Right Rear (–) Speaker Output Lead (Violet/  
Black)  
q
w
Right Rear (+) Speaker Output Lead (Violet)  
To prevent external noise from entering the audio system.  
Locate the unit and route the leads at least 10cm away from the car harness.  
Keep the battery power leads as far away from other leads as possible.  
Connect the ground lead securely to a bare metal spot (remove any paint, dirt or grease if necessary) of the car chassis.  
If you add an optional noise suppressor, connect it as far away from the unit as possible. Your Alpine dealer carries  
various Alpine noise suppressors, contact them for further information.  
Your Alpine dealer knows best about noise prevention measures so consult your dealer for further information.  
17-EN  
LIMITED WARRANTY  
ALPINE ELECTRONICS OF AMERICA, INC. AND ALPINE OF CANADA INC. ("Alpine"), are dedicated to quality  
craftsmanship and are pleased to offer this Warranty. We suggest that you read it thoroughly. Should you have any  
questions, please contact your Dealer or Alpine at one of the telephone numbers listed below.  
You should provide a detailed description of the  
[PRODUCTS COVERED:  
2
problem(s) for which service is required.  
You must supply proof of your purchase of the product.  
You must package the product securely to avoid  
damage during shipment.  
This Warranty covers Car Audio/Visual Products and  
Related Accessories ("the product"). Products purchased in  
the Canada are covered only in the Canada. Products  
purchased in the U.S.A. are covered only in the U.S.A.  
3
4
[HOW WE LIMIT IMPLIED WARRANTIES:  
ANY IMPLIED WARRANTIES INCLUDING FITNESS FOR  
USE AND MERCHANTABILITY ARE LIMITED IN  
DURATION TO THE PERIOD OF THE EXPRESS  
WARRANTY SET FORTH ABOVE AND NO PERSON IS  
AUTHORIZED TO ASSUME FOR ALPINE ANY OTHER  
LIABILITY IN CONNECTION WITH THE SALE OF THE  
PRODUCT.  
[LENGTH OF WARRANTY:  
This Warranty is in effect for one year from the date of the  
first consumer purchase.  
[LIFETIME TAPE HEAD WARRANTY:  
All Alpine Car Audio analog tape heads excluding Video  
tape heads are warranted for life against manufacturing  
defects causing failure.  
[WHO IS COVERED:  
[HOW WE EXCLUDE CERTAIN DAMAGES:  
ALPINE EXPRESSLY DISCLAIMS LIABILITY FOR  
INCIDENTAL AND CONSEQUENTIAL DAMAGES  
CAUSED BY THE PRODUCT. THE TERM "INCIDENTAL  
DAMAGES" REFERS TO EXPENSES OF  
This Warranty only covers the original purchaser of the  
product, who must reside in the United States, Puerto Rico  
or Canada.  
[WHAT IS COVERED:  
This Warranty covers defects in materials or workmanship  
(parts and labor) in the product.  
TRANSPORTING THE PRODUCT TO THE ALPINE  
SERVICE CENTER, LOSS OF THE ORIGINAL  
PURCHASER'S TIME, LOSS OF THE USE OF THE  
PRODUCT, BUS FARES, CAR RENTALS OR OTHERS  
COSTS RELATING TO THE CARE AND CUSTODY OF  
THE PRODUCT. THE TERM "CONSEQUENTIAL  
DAMAGES" REFERS TO THE COST OF REPAIRING OR  
REPLACING OTHER PROPERTY WHICH IS DAMAGED  
WHEN THIS PRODUCT DOES NOT WORK PROPERLY.  
THE REMEDIES PROVIDED UNDER THIS WARRANTY  
ARE EXCLUSIVE AND IN LIEU OF ALL OTHERS.  
[WHAT IS NOT COVERED:  
This Warranty does not cover the following:  
Damage occurring during shipment of the product to  
Alpine for repair (claims must be presented to the  
carrier).  
1
Damage caused by accident, abuse, negligence,  
misuse, improper connections, improper operation or  
failure to follow instructions contained in the Owner's  
manual.  
2
[HOW STATE/PROVINCIAL LAW RELATES TO THE  
WARRANTY:  
Damage caused by act of God, including without  
limitation, earthquake, fire, flood, storms or other acts of  
nature.  
3
This Warranty gives you specific legal rights, and you may  
also have other rights which vary form state to state and  
province to province. In addition, some states/provinces do  
not allow limitations on how long an implied warranty lasts,  
and some do not allow the exclusion or limitation of  
incidental or consequential damages. Accordingly,  
limitations as to these matters contained herein may not  
apply to you.  
Any cost or expense related to the removal or  
reinstallation of the product.  
Service performed by an unauthorized person, company  
or association.  
Any product which has the serial number defaced,  
altered or removed.  
Any product which has been adjusted, altered or  
modified without Alpine's consent.  
Any product not distributed by Alpine within the United  
States, Puerto Rico or Canada.  
Any product not purchased from an Authorized Alpine  
Dealer.  
Any product that has been determined to contain an  
excessive amount of dust or dirt and any product that  
contains other contaminants including liquid or foreign  
objects.  
4
5
6
7
8
9
p
[IN CANADA ONLY:  
This Warranty is not valid unless your Alpine car audio  
product has been installed in your vehicle by an Authorized  
Installation Center, and this warranty stamped upon  
installation by the installation center.  
[HOW TO CONTACT CUSTOMER SERVICE:  
Should the product require service, please call the following  
number for your nearest Authorized Alpine Service Center.  
[HOW TO OBTAIN WARRANTY SERVICE:  
U.S.A.  
CANADA  
1-800-ALPINE-1 (1-800-257-4631)  
1-800-ALPINE-1 (1-800-257-4631)  
You are responsible for delivery of the product to an  
Authorized Alpine Service Center or Alpine for repair  
and for payment of any initial shipping charges. Alpine  
will, at its option, repair or replace the product with a  
new or reconditioned product without charge. If the  
repairs are covered by the warranty, and if the product  
was shipped to an Authorized Alpine Service Center or  
Alpine, Alpine will pay the return shipping charges.  
1
Alpine Electronics of America, Inc., 19145 Gramercy Place, Torrance, California 90501, U.S.A.  
Alpine Electronics of Canada, Inc., Suite 203, 7300 Warden Ave. Markham, Ontario, L3R 9Z6, Canada  

Lenoxx Electronics CD 1095 User Manual
Kyocera KX440 User Manual
Kingston Technology Computer Drive DT4000 User Manual
iLive ICP310B User Manual
Huawei Technologies Cell Phone U8860 User Manual
HTC HD7 User Manual
Fujitsu MPG3XXXAH E User Manual
Emerson CKS3038S User Manual
Audiovox SP 11CD User Manual
ABB TA514 SAFETY User Manual