Alpine CDM 7859R User Manual

R
EN  
DE  
FR  
ES  
IT  
CDM-7859R  
CDM-7858R  
CDM-7856R  
FM/MW/LW/RDS CD Receiver  
• OWNER'S MANUAL  
Please read before using this equipment.  
ALPINE ELECTRONICS, INC.  
Tokyo office: 1-1-8 Nishi Gotanda,  
ALPINE ELECTRONICS OF AUSTRALIA PTY. LTD.  
ALPINE ELECTRONICS FRANCE S.A.R.L.  
(RCS PONTOISE B 338 101 280)  
98, Rue De La Belle Etoile, Z.I. Paris Nord Il  
B.P. 50016 F-95945, Roissy, Charles De Gaulle  
Cedex, France  
6-8 Fiveways Boulevarde Keysborough,  
Shinagawa-ku,  
Tokyo 141-8501, Japan  
Tel.: (03) 3494-1101  
Victoria 3173, Australia  
Tel.: (03) 9769-0000  
ALPINE ELECTRONICS GmbH  
Kreuzerkamp 7-11 40878 Ratingen, Germany  
Tel.: 02102-45 50  
Tel.: 01-48 63 89 89  
ALPINE ELECTRONICS OF AMERICA, INC.  
19145 Gramercy Place, Torrance,  
California 90501, U.S.A.  
SE  
ALPINE ELECTRONICS OF U.K., LTD.  
13 Tanners Drive, Blakelands, Milton Keynes  
MK14 5BU, U.K.  
ALPINE ITALIA S.p.A.  
Via C. Colombo 8, 20090 Trezzano Sul Naviglio  
MI, Italy  
Tel.: 1-800-ALPINE-1 (1-800-257-4631)  
Tel.: 01908-61 15 56  
ALPINE ELECTRONICS OF CANADA, INC.  
Suite 203, 7300 Warden Ave. Markham,  
Ontario L3R 9Z6, Canada  
Tel.: 02-48 47 81  
ALPINE ELECTRONICS DE ESPAÑA, S.A.  
Portal De Gamarra 36, Pabellón 32  
01013 Vitoria (Alava)-Apdo. 133, Spain  
Tel.: 34-45-283588  
Tel.: 1-800-ALPINE-1 (1-800-257-4631)  
Designed by ALPINE Japan  
Printed in China (Y)  
68P01434K36-O  
Meiyi Printing Factory, Dalian, China  
No. 28 Chang Qing Street, Xi Gang District, Dalian, China  
ENGLISH  
Contents  
Operating Instructions  
CD Player Operation  
Inserting/Ejecting Disc ....................................13  
Normal Play and Pause ....................................13  
Music Sensor (Skip).........................................14  
Fast Forward and Backward ............................14  
Repeat Play ......................................................14  
M.I.X. (Random Play) .....................................14  
Scanning Programmes .....................................15  
Displaying and Scrolling CD Text ...................15  
Controlling CD Changer (Optional) ................15  
WARNING  
WARNING.................................................. 2  
CAUTION ................................................... 2  
PRECAUTION ........................................... 2  
Basic Operations  
Detaching the Front Panel..................................4  
Attaching the Front Panel ..................................4  
Initial System Start-Up ......................................4  
Turning Power On and Off ................................5  
Subwoofer On and Off .......................................5  
Adjusting Volume/Balance  
Informations  
In Case of Difficulty ........................................16  
Specifications ...................................................17  
(Between Left and Right)/Fader  
Installation and Connections  
(Between Front and Rear) ..............................5  
Turning Loudness On/Off ..................................5  
Adjusting Source Signal Levels .........................5  
Setting the Bass Control ....................................6  
Setting the Treble Control ..................................6  
Changing Audio Level Display Pattern .............7  
Setting the AUX Mode.......................................7  
Switching the Tuner Mode .................................7  
Precautions .......................................................18  
Installation .......................................................19  
Connection .......................................................20  
Radio Operations  
Manual Tuning ...................................................8  
Automatic Seek Tuning .....................................8  
Manual Storing of Station Presets .....................9  
Automatic Memory of Station Presets ...............9  
Tuning to Preset Stations ...................................9  
RDS Operations  
Setting RDS Reception Mode and Receiving  
RDS Stations ................................................10  
Recalling Preset RDS Stations.........................10  
Receiving RDS Regional (Local) Stations ......11  
Receiving Traffic Information..........................11  
PTY (Programme Type) Tuning ......................11  
Receiving Traffic Information While Playing  
CD or Radio..................................................12  
Priority News ...................................................12  
1-EN  
WARNING  
DO NOT PLACE HANDS, FINGERS OR FOREIGN  
WARNING  
OBJECTS IN INSERTION SLOTS OR GAPS.  
Doing so may result in personal injury or damage to the  
product.  
The exclamation point within an equilateral  
triangle and "WARNING" are intended to alert  
the user to the presence of important  
operating instructions.  
CAUTION  
Failure to heed the instructions will result in  
severe injury or death.  
The exclamation point within an equilateral  
triangle and "CAUTION" are intended to alert  
the user to the presence of important  
operating instructions.  
DO NOT OPERATE ANY FUNCTION THAT TAKES YOUR  
ATTENTION AWAY FROM SAFELY DRIVING YOUR  
Failure to heed the instructions can result in  
injury or material damage.  
VEHICLE.  
Any function that requires your prolonged attention  
should only be performed after coming to a complete stop.  
Always stop the vehicle in a safe location before  
performing these functions. Failure to do so may result in  
an accident.  
HALT USE IMMEDIATELY IF A PROBLEM APPEARS.  
Failure to do so may cause personal injury or damage to  
the product. Return it to your authorized Alpine dealer or  
the nearest Alpine Service Centre for repairing.  
KEEP THE VOLUME AT A LEVEL WHERE YOU CAN  
STILL HEAR OUTSIDE NOISE WHILE DRIVING.  
Failure to do so may result in an accident.  
PRECAUTIONS  
Temperature  
Be sure the temperature inside the vehicle is between  
+60°C (+140°F) and 10°C (+14°F) before turning your  
unit on.  
MINIMIZE DISPLAY VIEWING WHILE DRIVING.  
Viewing the display may distract the driver from looking  
ahead of the vehicle and cause an accident.  
DO NOT DISASSEMBLE OR ALTER.  
Doing so may result in an accident, fire or electric shock.  
Moisture Condensation  
You may notice the CD playback sound wavering due to  
condensation. If this happens, remove the disc from the  
player and wait about an hour for the moisture to  
evaporate.  
USE ONLY IN CARS WITH A 12 VOLT NEGATIVE  
GROUND.  
(Check with your dealer if you are not sure.) Failure to do  
so may result in fire, etc.  
Damaged Disc  
Do not attempt to play cracked, warped, or damaged  
discs. Playing a bad disc could severely damage the  
playback mechanism.  
KEEP SMALL OBJECTS SUCH AS BATTERIES OUT  
OF THE REACH OF CHILDREN.  
Swallowing them may result in serious injury. If  
swallowed, consult a physician immediately.  
Maintenance  
If you have problems, do not attempt to repair the unit  
yourself. Return it to your Alpine dealer or the nearest  
Alpine Service Station for servicing.  
USE THE CORRECT AMPERE RATING WHEN  
REPLACING FUSES.  
Failure to do so may result in fire or electric shock.  
DO NOT BLOCK VENTS OR RADIATOR PANELS.  
Doing so may cause heat to build up inside and may result  
in fire.  
USE THIS PRODUCT FOR MOBILE 12V APPLICATIONS.  
Use for other than its designed application may result in  
fire, electric shock or other injury.  
2-EN  
Installation Location  
Never Attempt the Following  
Make sure the CDM-7859R/CDM-7858R/CDM-7856R  
will not be installed in a location subjected to:  
Do not grip or pull out the disc while it is being pulled  
back into the player by the automatic reloading  
mechanism.  
Do not attempt to insert a disc into the unit when the unit  
power is off.  
Direct sun and heat  
High humidity and water  
Excessive dust  
Excessive vibrations  
Handling the Detachable Front Panel  
Do not expose to rain or water.  
Do not drop or apply shock.  
Correct Handling  
Inserting Discs  
Do not drop the disc while handling. Hold the disc by its  
edge so that no fingerprints are left on the surface. Do not  
affix tape, paper, or gummed labels to the disc. Do not  
write on the disc.  
Your player accepts only one disc at a time for playback.  
Do not attempt to load more than one disc.  
Make sure the label side is facing up when you insert the  
disc. Your player will automatically eject any disc that is  
inserted incorrectly. If the player continues to eject a  
correctly inserted disc, push the Reset switch with a  
pointed object such as a ballpoint pen.  
Playing a disc while driving on a very bumpy road may  
result in skips, but this will not scratch the disc or damage  
the player.  
CORRECT  
INCORRECT  
CORRECT  
New Discs  
As a protective measure to prevent the CD from jamming,  
the CD player will automatically eject discs with irregular  
surfaces or inserted incorrectly. When a new disc is  
inserted into the player and ejected after initial loading,  
using your finger, feel around the inside of the centre hole  
and outside edge of the disc. If you feel any small bumps  
or irregularities, this could inhibit proper loading of the  
disc. To remove the bumps, rub the inside edge of the hole  
and outside edge of the disc with a ballpoint pen or other  
such instrument, then insert the disc again.  
Disc Cleaning  
Fingerprints, dust, or soil on the surface of the disc could  
cause the CD player to skip. For routine cleaning, wipe  
the playing surface with a clean, soft cloth from the centre  
of the disc to the outer edge. If the surface is heavily  
soiled, dampen a clean, soft cloth in a solution of mild  
neutral detergent before cleaning the disc.  
Centre  
Hole  
Centre  
Hole  
New  
Disc  
Bumps  
Outside  
(Bumps)  
Irregular Shaped Discs  
Be sure to use round shape discs only for this unit and  
Disc Accessories  
There are various accessories available on the market for  
protecting the disc surface and improving sound quality.  
However, most of them will influence the thickness and/or  
diameter of the disc. Using such accessories can cause the  
disc to be out of standard specifications and may create  
operational problems. We recommend not using these  
accessories on discs played in Alpine CD players.  
never use any special shape discs.  
Use of special shape discs may cause damage to the  
mechanism.  
Transparent Sheet  
Disc Stabilizer  
3-EN  
Basic Operations  
c
POWER  
BAND  
2
MODE / LOUD  
g DN  
f UP  
1
SETUP  
Detaching the Front Panel  
Controllable With Remote Control  
This unit can be controlled with an optional  
Alpine remote control. For details, consult your  
Alpine dealer.  
Point the optional remote control transmitter at  
the remote control sensor.  
1
2
3
Press and hold the POWER button for at least 3  
seconds to turn off the power.  
Press the  
(Release) button at lower left corner  
until the front panel pops out.  
Remote control sensor  
Grasp the left side of the front panel and pull it out.  
NOTES  
The front panel may become hot in normal usage  
(especially the connector terminals), this is not a  
malfunction.  
Connectable to Remote Control Interface Box  
You can operate this unit from the vehicle's  
control unit when an Alpine Remote Control  
Interface Box (optional) is connected. For  
details, contact your Alpine dealer.  
To protect the front panel, place it in the supplied  
carrying case.  
Initial System Start-Up  
Attaching the Front Panel  
1
Immediately after installing or applying power to  
the unit, it should be initialized. To do this, first,  
remove the detachable front panel. Behind the  
front panel, to the right of the connector, there is  
a small hole. Using a pencil or other pointed  
object, press the Reset switch mounted behind  
this hole to complete the initialization procedure.  
1
First, insert the right side of the front panel into  
the main unit. Align the groove on the front panel  
with the projection on the main unit.  
2
Push the left side of the front panel until it locks  
firmly into the main unit.  
2
1
1
1
Reset switch  
NOTE  
Before attaching the front panel, make sure that there is  
no dirt or dust on the connector terminals and no  
foreign object between the front panel and the main unit.  
4-EN  
Turning Power On and Off  
Turning Loudness On/Off  
1
Press the POWER button to turn on the unit.  
Loudness introduces a special low- and high-  
frequency emphasis at low listening levels. This  
compensates for the ear's decreased sensitivity  
to bass and treble sound.  
NOTE  
The unit can be turned on by pressing any other button  
except the eject c button.  
The volume level gradually increases to the  
previous level you were listening to before the  
unit was turned off.  
Press and hold the POWER button again for at  
least 3 seconds.  
1
Press and hold the LOUD button for at least  
2 seconds to activate or deactivate the loudness  
mode. The display shows "LOUD ON" when the  
loudness mode is activated.  
NOTE  
The very first time the power is turned on, the volume  
will start from level 12, and the LOUD function will be  
on in the tuner mode.  
Adjusting Source Signal Levels  
If the difference in volume level between the CD  
player and FM radio is too great, adjust the FM  
signal level as follows.  
Subwoofer On and Off  
1
2
3
4
Press and hold the SETUP button for at least 3  
seconds.  
1
2
3
Press and hold the SETUP button for at least 3  
seconds.  
Press the g DN or f UP button to select  
the SUB-W mode.  
Press the g DN or f UP button to select  
the FM LV (FM LEVEL) mode.  
Press the BAND button to select Subwoofer ON  
or OFF.  
Press the BAND button to select the FM signal  
level HI (High) or LO (Low) to make the signal  
levels between the FM band and CD player  
closer.  
After setting is completed, press the SETUP  
button to return to normal mode.  
NOTES  
Initial mode is "Subwoofer ON."  
Set to "Subwoofer OFF" unless the subwoofer is  
used.  
4
Press the SETUP button to return to normal  
mode.  
When the subwoofer is turned on, the subwoofer  
output level can be adjusted. For more details, refer  
to the Adjusting Volume/Balance/Fader.  
Adjusting Volume/Balance  
(Between Left and Right)/Fader  
(Between Front and Rear)  
1
Press the MODE button repeatedly to choose  
the desired mode.  
Each press changes the modes as follows:  
VOL  
BAL  
FAD  
NOTE  
If the 5 or 6 button is not pressed in 5 seconds after  
selecting the BALANCE and FADER modes, the unit  
automatically sets in the VOLUME mode.  
2
Press the 5 and 6 buttons until the desired  
sound is obtained in each mode.  
5-EN  
Basic Operation  
SOURCE  
BAND  
2
1
g DN  
f UP  
BASS C.  
TREBLE C.  
SETUP  
Setting the Bass Control  
Setting the Treble Control  
You can change the Bass Frequency emphasis  
to create your own tonal preference.  
You can change the Treble Frequency emphasis  
to create your own tonal preference.  
1
Press the BASS C. button to turn on the Bass  
setting mode.  
1
Press the TREBLE C. button to turn on the  
Treble setting mode.  
2-1 Setting the Bass frequency:  
2-1 Setting Treble frequency:  
Press the g DN or f UP button to select  
the desired Bass centre frequency.  
60Hz 80Hz 100Hz 200Hz  
Press g DN or f UP button to select the  
desired Treble centre frequency.  
10kHz 12.5kHz 15kHz 17.5kHz  
Emphasizes the displayed Bass frequency  
ranges.  
Emphasizes the displayed Treble frequency  
ranges.  
2-2 Setting the Bass Band Width (Q-Factor):  
Press the BAND button to select the desired  
Bass Band Width.  
2-2 Setting Treble Level:  
Press the 5 or 6 button to select the desired  
Treble Level (-7~+7).  
You can emphasize the treble frequency.  
WIDE1 WIDE2WIDE3 WIDE4  
...........................  
(Wide)←  
(Narrow)  
NOTES  
If no buttons are pressed within 5 seconds, the Treble  
control setting will be turned off automatically.  
The settings of the Treble Level will be individually  
memorized for each source (FM, MW (LW) and CD)  
until the setting is changed. Depending on the  
connected devices, some functions and display  
indications do not work.  
Changes the displayed frequency's band width  
to narrow or wide.  
2-3 Setting the Bass Level:  
Press the 5 or 6 button to select the desired  
Bass Level (-7~+7).  
You can emphasize or weaken the bass  
frequency.  
NOTES  
If no buttons are pressed within 5 seconds, the Bass  
control setting will be turned off automatically.  
The settings of the Bass Level will be individually  
memorized for each source (FM, MW (LW) and CD)  
until the setting is changed. Depending on the  
connected devices, some functions and display  
indications do not work.  
6-EN  
Changing Audio Level Display  
Pattern  
3
4
5
Press the BAND button to toggle the mode  
between AUX ON and AUX OFF.  
Press the SETUP button to return to normal  
mode.  
1
2
Press the SETUP button for at least 3 seconds.  
Press g DN or f UP button to select the  
DISP mode.  
To adjust the volume, etc., first press the  
SOURCE button and select the AUX mode, then  
make the necessary adjustment.  
3
Press BAND button to switch the display pattern.  
DISP1 DISP2 DISP OFF  
TUNER CD AUX  
DISP1:  
Lights the Volume indicator.  
NOTE  
When AUX ON is selected, a CD Changer cannot be  
Volume indicator  
used.  
DISP2:  
Switching the Tuner Mode  
Lights the mode and value bars to show the  
settings in the Bass engine display.  
The CDM-7859R/CDM-7858R/CDM-7856R  
incorporates the MAX TUNE Pro for the highest  
quality tuner audio. Moreover, you can choose  
between two settings to suit your own personal  
sound preferences usage.  
Example settings:  
Bass center frequency:  
100 Hz  
Bass band width: WIDE1  
Bass level: - 6  
NOTE  
The last mode set will remain in effect. The mode and  
value bars light and show the Bass engine settings.  
1
2
3
Press and hold the SETUP button for at least 3  
seconds.  
DISP OFF:  
Press the g DN or f UP button to select  
NORMAL.  
Turns off the light in Bass engine display.  
If you set DISP OFF, the Volume indicator, Audio  
Level indicator, and Bass engine displays are  
not lit at all times.  
To light them, press the BAND button to exit  
DISP OFF.  
Press the BAND button to switch the TUNER  
mode.  
HI-FI NORMAL STABLE  
4
Press the SETUP button to return to normal  
mode.  
NORMAL: Standard setting  
HI-FI: Sound quality priority setting  
STABLE: Noiseless priority setting  
Setting the AUX Mode  
NOTES  
The initial setting at the factory is "NORMAL."  
If you find the sound is very noisy while listening to  
the tuner in the HI-FI mode, we recommend you  
change to the NORMAL mode.  
You can input TV/video sound by connecting an  
optional "M-Bus V-Link" (M-Bus/RCA interface  
cable KCM-122B) to this component.  
4
When the setting is completed, press the  
SETUP button to return to the normal mode.  
1
2
Press and hold the SETUP button for at least 3  
seconds.  
Press the g DN or f UP button to select  
the AUX mode.  
7-EN  
Radio Operations  
TUNE / A.ME  
BAND  
SOURCE  
g DN f UP  
F
Preset buttons  
(1 through 6)  
Manual Tuning  
Automatic Seek Tuning  
1
Press the SOURCE button to select the radio  
mode.  
1
Press the SOURCE button to select the radio  
mode.  
2
Press the BAND button repeatedly until the  
desired radio band is displayed.  
2
Press the BAND button repeatedly until the  
desired radio band is displayed.  
Each press changes the band:  
Each press changes the band:  
F1(FM1) F2(FM2) MW LW  
F1(FM1) F2(FM2) MW LW  
3
4
Press the TUNE button repeatedly until "DX  
SEEK" and "SEEK" disappear from the display.  
3
4
Press the TUNE button to illuminate the DX and  
SEEK indicators in the display.  
The SEEK indicator illuminates. With the DX  
mode activated, both strong and weak stations  
will be tuned in the Auto-Seek operation.  
Press again to return to the local mode. The DX  
indicator will turn off and the SEEK indicator will  
illuminate for a few seconds. Now, only strong  
stations will be tuned.  
NOTE  
The initial mode is DX SEEK.  
Press the g DN or f UP button to move  
downward or upward one step respectively until  
the desired station frequency is displayed.  
Press the g DN or f UP button to  
automatically seek a station downward or  
upward respectively.  
The unit will stop at the next station it finds.  
Press the same button again to seek the next  
station.  
8-EN  
Manual Storing of Station Presets  
Tuning to Preset Stations  
1
Select the radio band and tune in a desired radio  
station you wish to store in the preset memory.  
1
Press the BAND button repeatedly until the  
desired band is displayed.  
Each press changes the band:  
2
Press the F button so that the F (Function)  
indicator light goes out. Then press and hold any  
one of the preset buttons (1 through 6) for at  
least 2 seconds until the station frequency on the  
display blinks.  
F1(FM1) F2(FM2) MW LW  
2
Press the F button so that the F (Function)  
indicator light goes out. Then press the station  
preset button that has your desired radio station  
in memory.  
The display shows the band, preset number with  
a triangle and frequency of the station selected.  
3
4
Press the Preset button into which you wish to  
store the station while the frequency display is  
blinking (within 5 seconds).  
The display stops blinking once the station has  
been memorized. The display shows the band,  
preset No. with a triangle (9) and station  
frequency memorized.  
Repeat the procedure to store up to 5 other  
stations onto the same band.  
To use this procedure for other bands, simply  
select the band desired and repeat the  
procedure.  
A total of 24 stations can be stored in the preset  
memory (6 stations for each band; FM1, FM2,  
MW and LW).  
NOTE  
If you store a station in a preset memory which already  
has a station, the current station will be cleared and  
replaced with the new station.  
Automatic Memory of Station  
Presets  
1
Press the BAND button repeatedly until the  
desired radio band is displayed.  
Each press changes the band:  
F1(FM1) F2(FM2) MW LW  
2
Press and hold the A.ME button for at least 2  
seconds.  
The tuner will automatically seek and store 6  
strong stations in the selected band in order of  
signal strength.  
The frequency on the display continues to  
change while the automatic memory is in  
progress.  
When the automatic memory has been  
completed, the tuner goes to the station stored  
in the preset location No. 1.  
NOTE  
If no stations are stored, the tuner will return to the  
original station you were listening to before the auto  
memory procedure began.  
9-EN  
RDS Operations  
BAND  
T.INFO  
g DN f UP  
SETUP/F  
AF  
PTY  
Setting RDS Reception Mode and  
Receiving RDS Stations  
Recalling Preset RDS Stations  
1
Press the F button so that the F (Function)  
indicator lights up.  
The RDS (Radio Data System) is a radio  
information system using the 57 kHz subcarrier  
of regular FM broadcast. The RDS allows you to  
receive a variety of information such as traffic  
information, station names, and to automatically  
re-tune to a stronger transmitter that is  
2
3
Press the AF button to activate the RDS mode.  
Press the F button to activate the normal mode.  
The F indicator light goes out.  
broadcasting the same programme.  
4
Make sure that the F indicator light goes out,  
then press the preset button in which your  
desired RDS station is preset.  
If the preset station's signal is weak, the unit  
automatically searches and tunes to a stronger  
station in the AF (Alternative Frequencies) list.  
1
Press the F button so that the F (Function)  
indicator lights up.  
2
3
Press the AF button to activate the RDS mode.  
Press the g DN or f UP button to tune in  
the desired RDS station.  
5
If the preset station and the stations in the AF list  
cannot be received:  
Press the same preset button again within 5  
seconds to have the unit search for a station in  
the PI (Programme Identification) list.  
If there are still no stations receivable in the  
area, the unit displays the frequency of the  
preset station and the preset indicator  
disappears.  
If the signal level of the Regional (Local) station  
being tuned becomes too weak to receive,  
press the same preset button to tune in a  
Regional station in other district.  
NOTE  
When the BAND button is pressed and held for more  
than 2 seconds while a station name is displayed, the  
display shows the station frequency for 5 seconds.  
4
5
Press the AF button again to deactivate the RDS  
mode.  
Press the F button to activate the normal mode.  
The F indicator light goes out.  
Tips  
The RDS digital data includes the followings:  
NOTE  
PI  
Programme Identification  
Programme Service Name  
List of Alternative Frequencies  
Traffic Programme  
For presetting the RDS stations, refer to the Radio  
Operation section. The RDS stations can be preset in  
the F1 and F2 bands only.  
PS  
AF  
TP  
TA  
Traffic Announcement  
PTY Programme Type  
EON Enhanced Other Networks  
10-EN  
Receiving RDS Regional (Local) Stations  
PTY (Programme Type) Tuning  
1
2
3
Press and hold the SETUP button for at least 3  
seconds to activate the setting mode.  
1
2
Press the F button so that the F (Function)  
indicator lights up.  
Press the PTY button to activate the PTY mode,  
while the unit is in Radio (FM receiving) mode.  
The Programme Type of the station being  
currently received will be displayed for 5 seconds.  
If there is no receivable PTY broadcast, "NO  
PTY" will be displayed for 5 seconds.  
Press the g DN or f UP button to select  
the REG mode.  
Press the BAND button to turn on or off the REG  
(Regional) mode.  
In the REG OFF mode, the unit automatically  
keeps receiving the related local RDS station.  
If no RDS station can be received, the display  
shows "NO RDS."  
NOTE  
4
Press the SETUP button to deactivate the setting  
mode.  
If no button is pressed within 5 seconds after pressing  
the PTY button, the PTY mode will be automatically  
cancelled.  
Receiving Traffic Information  
3
4
Press the g DN and f UP buttons within 5  
seconds after activating the PTY mode to  
choose the desired programme type while the  
PTY (programme type) is being displayed. Each  
press scrolls the programme type by one.  
1
Press the T.INFO button repeatedly until the  
T.INFO indicator appears in the display.  
2
Press the g DN or f UP button to select  
your desired traffic information station. When a  
traffic information station is tuned in, the TP  
indicator lights up.  
LIGHT M CLASSICS OTHER M  
Press the PTY button within 5 seconds after  
selecting the programme type to start searching  
for a station in the selected programme type.  
The chosen programme type indicator blinks during  
searching and lights when a station is found.  
Traffic information is heard only when it is being  
broadcast. If traffic information is not being  
broadcast, the unit is set in the standby mode.  
When a traffic information broadcast begins, the  
unit automatically receives it and the display  
shows "TRF-INFO" for a few seconds and  
returns to the PS display.  
If no PTY station is found, "NO PTY" will be  
displayed for 2 seconds.  
5
Press the F button to activate the normal mode.  
The F indicator light goes out.  
When the traffic information broadcast is over, the  
unit will automatically set in the standby mode.  
NOTES  
If the traffic information broadcast signal falls below a  
certain level, the unit remains in the receiving mode  
for 1 minute. If the signal remains below a certain  
level for over 1 minute, the "T.INFO" indicator blinks.  
If you do not want to listen to the traffic information  
being received, lightly press the T.INFO button to  
skip that traffic information message. The T. INFO  
mode will remain in the ON position to receive the  
next traffic information message.  
If the volume level is changed while receiving traffic  
information, the changed volume level will be  
memorized. When traffic information is received next  
time, the volume level will be automatically adjusted  
to the level memorized.  
11-EN  
RDS Operations  
T.INFO  
g DN f UP  
F
NEWS  
Receiving Traffic Information While  
Playing CD or Radio  
Priority News  
This function allows you to preset to give priority  
to the News programme.You will never miss the  
News programme as the unit automatically gives  
priority to the News programme whenever it  
begins broadcasting, and interrupts the  
1
2
Press the T.INFO button repeatedly until the  
T.INFO indicator appears in the display.  
Press the g DN and f UP buttons to  
select a traffic information station if necessary.  
programme you are currently listening. This  
feature is functional when your unit is set to a  
mode other than the LW and MW modes.  
When a traffic information broadcast starts,  
the unit automatically mutes the CD player/  
changer or the regular FM broadcast.  
When the traffic information broadcast  
finishes, the unit automatically returns to the  
original source play before the traffic  
information broadcast began.  
1
2
Press the F button so that the F indicator lights  
up while the unit is in Radio (FM receiving)  
mode.  
Press the NEWS button to activate the  
PRIORITY NEWS mode.  
When traffic information stations cannot be  
received:  
In the tuner mode:  
When the TP signal can no longer be received  
for over 1 minute, the "T.INFO" indicator blinks.  
In the CD mode:  
"NEWS" lights up in the display.  
To disable the PRIORITY NEWS function,  
press the NEWS button.  
NOTE  
In the PRIORITY NEWS function, unlike in the T.INFO  
function, the volume does not increase automatically.  
When the TP signal can no longer be received,  
the traffic information station of another  
frequency will be selected automatically.  
3
Press the F button to activate the normal mode,  
while the unit is in Radio (FM receiving) mode.  
The F indicator light goes out.  
NOTE  
The receiver is equipped with the EON (Enhanced  
Other Networks) function in order to keep track of  
additional alternate frequencies to the AF list. The EON  
indicator appears while an RDS EON station is being  
received. If the station being received does not  
broadcast the traffic information, the receiver  
automatically tunes in the related station that  
broadcasts the traffic information when it occurs.  
3
Press the T.INFO button to deactivate the Traffic  
Information mode.  
The T.INFO indicator disappears.  
12-EN  
CD Player Operation  
- / J  
c
SOURCE  
Normal Play and Pause  
Inserting/Ejecting Disc  
1
Insert a CD. The CD player begins playback  
from the first track on the disc.  
1
Insert a CD half way into the slot with the label  
side facing up. The player automatically draws  
the disc into the disc compartment.  
The display shows the track number and  
elapsed time of the track being played. When  
the last track is played back the player returns to  
the first track and begins playback from that  
point.  
The Disc indicator appears to show that a disc  
is loaded.  
NOTE  
Three-inch (8cm) CD's can be used.  
2
Press the c button when you want to eject the  
CD.  
2
If a disc is already loaded in the CD player, press  
the SOURCE button to select the CD mode.  
NOTES  
If the CD is not removed for several seconds after it  
has been ejected, the player automatically draws the  
CD into the compartment to protect the CD.  
Only compact discs showing the marks below can be  
used.  
3
4
Press the -/J button to start CD play.  
Press the -/J button to temporarily stop CD  
playback.  
To resume playback, press the -/J button  
again.  
We cannot fully guarantee the playback of CD-R  
(CD-Recordable). You cannot playback CD-RW (CD-  
ReWritable) on this unit.  
13-EN  
CD Player Operation  
SOURCE  
- / J  
TITLE  
Preset buttons (1 through 6)  
g DN  
f UP  
F
M.I.X.  
REPEAT  
SCAN  
Music Sensor (Skip)  
Repeat Play  
1
Momentarily press the g DN button once  
during CD play to return to the beginning of the  
current track. If you wish to access a track  
further back, repeatedly press until you reach the  
desired track.  
1
Press the REPEAT button to play back  
repeatedly the track being played.  
The RPT indicator appears and the track will be  
played repeatedly.  
Press the REPEAT button again to deactivate  
Press the f UP button once to advance to the  
beginning of the next track. If you wish to access  
a track further ahead, press repeatedly until the  
desired track is reached.  
the repeat play.  
NOTE  
If a CD Changer is connected and the RPT ALL mode is  
selected, the unit repeatedly plays back all tracks on the  
disc selected.  
NOTE  
The music sensor feature is functional in the play or  
pause mode.  
RPT  
RPT ALL (OFF)  
NOTE  
In case a 6-disc CD changer is connected:  
Press the F button so that the F (Function) indicator  
lights up, then go to step 1.  
Press the F button to return to the normal mode.  
The F indicator light goes out.  
Fast Forward and Backward  
1
Press and hold the g DN or f UP button  
to quickly move backward or forward until you  
reach the desired section of the track.  
M.I.X. (Random Play)  
1
Press the M.I.X. button in the play or pause  
mode.  
The M.I.X. indicator will illuminate and the tracks  
on the disc will be played back in a random  
sequence. After all the tracks on the disc have  
been played back once, the player will begin a  
new random sequence play until the M.I.X.  
mode is cancelled.  
To cancel M.I.X. play, press the M.I.X. button again.  
NOTE  
In case a 6-disc CD changer is connected:  
Press the F button so that the F (Function) indicator  
lights up, then go to step 1.  
Press the F button to return to the normal mode.  
The F indicator light goes out.  
14-EN  
Scanning Programmes  
Controlling CD Changer (Optional)  
1
Press the SCAN button to activate the Scan  
mode.  
The first 10 seconds of each track will be played  
back in succession.  
If an optional Alpine 6-disc CD Changer is  
connected to the 8-pin DIN connector (M-Bus) of  
the CDM-7859R/CDM-7858R/CDM-7856R, you  
can control the CD Changer using the CDM-  
7859R/CDM-7858R/CDM-7856R.  
To stop scanning, press the SCAN button to  
deactivate the Scan mode.  
NOTE  
NOTE  
In case a 6-disc CD changer is connected:  
Press the F button so that the F (Function) indicator  
lights up, then go to step 1.  
Press the F button to return to the normal mode.  
The F indicator light goes out.  
The CD controls on the CDM-7859R/CDM-7858R/  
CDM-7856R for the CD Changer operation are  
functional only when the CD Changer is interconnected  
with the CDM-7859R/CDM-7858R/CDM-7856R.  
1
2
Press the SOURCE button to activate the CD  
Changer.  
The display shows "changer", the disc number  
and track number.  
Displaying and Scrolling CD Text  
While playing the audio CD with CD Text, the  
disc and track names can be displayed and  
scrolled.  
NOTE  
To start play or pause play, press the :/J button.  
Make sure that the F (Function) indicator light  
goes out, then press the Preset buttons to select  
the desired disc loaded in the CD Changer.  
1
In CD mode, press the TITLE button.  
The mode will change every time the button is  
pressed.  
CD mode:  
ELAPSED TIME DISPLAY  
TEXT DISPLAY (DISC NAME)∗  
TEXT DISPLAY (TRACK NAME)∗  
Displayed during playback of text compatible  
CD. "NO TEXT" will be displayed when the CD  
is not text compatible.  
Sample display when text compatible CD  
NOTE  
Some characters may not be displayed correctly with  
this device, depending on the character type.  
2
Press and hold the TITLE button for at least 3  
seconds to scroll the information stored on the  
disc.  
After scrolling, the display returns to normal  
mode.  
NOTE  
SCROLL: the display is scrolled only when a disc is  
loaded or when a track is changed or when the power  
turns ON during CD mode on this unit.  
Text: Text compatible CDs contain text information such  
as the disc name and track name. Such text information  
is referred to as "text."  
15-EN  
Informations  
CD insertion not possible.  
The CD is already in the CD player.  
- Eject the CD and remove it.  
In Case of Difficulty  
The CD is being improperly inserted.  
- Make sure the CD is being inserted following  
instructions in the Owner's Manual.  
Unable to fast forward or backward the CD.  
The CD has been damaged.  
- Eject the CD and discard it; using a damaged CD in  
your unit can cause damage to the mechanism.  
CD playback sound skips due to vibration.  
Improper mounting of the unit.  
If you encounter a problem, please review the  
items in the following checklist. This guide will  
help you isolate the problem if the unit is at fault.  
Otherwise, make sure the rest of your system is  
properly connected or consult your authorized  
Alpine dealer.  
- Securely re-mount the unit.  
Disc is very dirty.  
- Clean the disc.  
Disc has scratches.  
- Change the disc.  
The pick-up lens is dirty.  
- Do not use a commercial available lens cleaner disc.  
Consult your nearest ALPINE dealer.  
CD playback sound skips without vibration.  
Dirty or scratched disc.  
- Clean the disc; damaged disc should be replaced.  
Error displays (built-in CD player only)  
Mechanical error  
- Press the c button. After the error indication  
disappears, insert the disc again. If the above-  
mentioned solution does not solve the problem,  
consult your nearest ALPINE dealer.  
Basic  
No function or display.  
Vehicle's ignition is off.  
- If connected following instructions, the unit will not  
operate with the vehicle's ignition off.  
Improper power lead connections.  
- Check power lead connections.  
Blown fuse.  
- Check the fuse on the battery lead of the unit; replace  
with the proper value if necessary.  
Internal micro-computer malfunctioned due to  
interference noise etc.  
- Press the Reset switch with a ballpoint pen or other  
pointed article.  
Radio  
Unable to receive stations.  
No antenna or open connection in cable.  
- Make sure the antenna is properly connected;  
replace the antenna or cable if necessary.  
Unable to tune stations in the seek mode.  
You are in a weak signal area.  
- Make sure the tuner is in the DX mode.  
If the area you are in is a primary signal area, the  
antenna may not be grounded and connected properly.  
- Check your antenna connections; make sure the  
antenna is properly grounded at its mounting  
location.  
Indication for CD  
HI TEMP  
Protective circuit is activated due to high temperature.  
- The indicator will disappear when the temperature  
returns to within operation range.  
ERROR  
The antenna may not be the proper length.  
- Make sure the antenna is fully extended; if  
broken, replace the antenna with a new one.  
Broadcast is noisy.  
The antenna is not the proper length.  
- Extend the antenna fully; replace it if it is broken.  
The antenna is poorly grounded.  
Mechanism error.  
1. Press the c button and eject the CD.  
If not ejecting, consult your Alpine dealer.  
2. When the error indication remains after ejecting,  
press the c button again.  
If the error indication still does not turn off after pressing  
the c button for a few times, consult your Alpine dealer.  
- Make sure the antenna is grounded properly at its  
mounting location.  
Note  
When the "ERROR" is displayed:  
In case that the disc cannot be ejected by pressing the c  
button, press the Reset switch (refer to page 4) and press the  
c button again.  
CD  
If not ejecting, consult your Alpine dealer.  
CD Player/Changer not functioning.  
Out of operating temperature range +50˚C (+120˚F) for  
CD.  
- Allow the vehicle's interior (or trunk) temperature to  
cool.  
T– – – – –  
No CD is inserted.  
CD playback sound is wavering.  
Moisture condensation in the CD Module.  
- Allow enough time for the condensation to evaporate  
(about 1 hour).  
- Insert a CD.  
16-EN  
Indication for CD Changer  
HI TEMP  
Specifications  
FM TUNER SECTION  
Tuning Range  
87.5 108.0 MHz  
Protective circuit is activated due to high temperature.  
- The indicator will disappear when the temperature  
returns to within operation range.  
Mono Usable Sensitivity  
Alternate Channel Selectivity 80 dB  
Signal-to-Noise Ratio  
Stereo Separation  
0.7 µV  
65 dB  
35 dB  
ERROR - 01  
MW TUNER SECTION  
Tuning Range  
Sensitivity (IEC Standard)  
531 1,602 kHz  
25.1 µV/28 dB  
Malfunction in the CD Changer.  
- Consult your Alpine dealer. Press the magazine eject  
button and pull out the magazine.  
LW TUNER SECTION  
Tuning Range  
Sensitivity (IEC Standard)  
Check the indication. Insert the magazine again.  
If the magazine cannot be pulled out, consult your  
Alpine dealer.  
153 281 kHz  
31.6 µV/30 dB  
Magazine ejection not possible.  
CD SECTION  
Frequency Response  
- Press the magazine eject button. If the magazine does  
not eject, consult your Alpine dealer.  
5 20,000 Hz (±1 dB)  
Wow & Flutter (% WRMS) Below measurable limits  
Total Harmonic Distortion  
Dynamic Range  
Signal-to-Noise Ratio  
Channel Separation  
0.008% (at 1 kHz)  
95 dB (at 1 kHz)  
105 dB  
ERROR - 02  
A disc is left inside the CD Changer.  
85 dB (at 1 kHz)  
- Press the Eject button to activate the eject function.  
When the CD Changer finishes the eject function,  
insert an empty CD magazine into the CD Changer to  
receive the disc left inside the CD Changer.  
GENERAL  
Power Requirement  
14.4 V DC  
(1116 V allowable)  
Maximum Power Output  
Output Voltage  
Bass  
Treble  
Weight  
45 W × 4  
NO MAGZN  
2 V/10k ohms  
±14 dB at 60 Hz  
±14 dB at 10 kHz  
1.5 kg (3 lbs. 5 oz)  
No magazine is loaded into the CD Changer.  
- Insert a magazine.  
CHASSIS SIZE  
Width  
Height  
NO DISC  
178 mm (7")  
50 mm (2")  
No indicated disc.  
Depth  
155 mm (6-1/8")  
- Choose another disc.  
NOSEPIECE SIZE  
Width  
Height  
Depth  
170 mm (63/4")  
46 mm (1-13/16")  
18 mm (11/16")  
Due to continuous product improvement, specifications and  
design are subject to change without notice.  
17-EN  
Installation and Connections  
Before installing or connecting the unit, please  
read the following and pages 2 and 3 of this  
manual thoroughly for proper use.  
Caution  
HAVE THE WIRING AND INSTALLATION DONE BY  
EXPERTS.  
The wiring and installation of this unit requires special  
technical skill and experience. To ensure safety, always  
contact the dealer where you purchased this product to  
have the work done.  
Warning  
MAKE THE CORRECT CONNECTIONS.  
Failure to make the proper connections may result in fire  
or product damage.  
USE SPECIFIED ACCESSORY PARTS AND INSTALL  
THEM SECURELY.  
Be sure to use only the specified accessory parts. Use of  
other than designated parts may damage this unit internally  
or may not securely install the unit in place. This may cause  
parts to become loose resulting in hazards or product failure.  
USE ONLY IN CARS WITH A 12 VOLT NEGATIVE  
GROUND.  
(Check with your dealer if you are not sure.) Failure to do  
so may result in fire, etc.  
ARRANGE THE WIRING SO IT IS NOT CRIMPED OR  
BEFORE WIRING, DISCONNECT THE CABLE FROM  
PINCHED BY A SHARP METAL EDGE.  
THE NEGATIVE BATTERY TERMINAL.  
Failure to do so may result in electric shock or injury due  
to electrical shorts.  
Route the cables and wiring away from moving parts (like  
the seat rails) or sharp or pointed edges. This will prevent  
crimping and damage to the wiring. If wiring passes through  
a hole in metal, use a rubber grommet to prevent the wire's  
insulation from being cut by the metal edge of the hole.  
DO NOT ALLOW CABLES TO BECOME ENTANGLED  
IN SURROUNDING OBJECTS.  
Arrange wiring and cables in compliance with the manual  
to prevent obstructions when driving. Cables or wiring  
that obstruct or hang up on places such as the steering  
wheel, gear lever, brake pedals, etc. can be extremely  
hazardous.  
DO NOT INSTALL IN LOCATIONS WITH HIGH  
MOISTURE OR DUST.  
Avoid installing the unit in locations with high incidence  
of moisture or dust. Moisture or dust that penetrates into  
this unit may result in product failure.  
DO NOT SPLICE INTO ELECTRICAL CABLES.  
Never cut away cable insulation to supply power to other  
equipment. Doing so will exceed the current carrying  
capacity of the wire and result in fire or electric shock.  
Precautions  
Be sure to disconnect the cable from the () battery post  
before installing your CDM-7859R/CDM-7858R/CDM-  
7856R. This will reduce any chance of damage to the unit in  
case of a short-circuit.  
DO NOT DAMAGE PIPE OR WIRING WHEN  
Be sure to connect the colour coded leads according to the  
diagram. Incorrect connections may cause the unit to  
malfunction or damage to the vehicle's electrical system.  
When making connections to the vehicle's electrical  
system, be aware of the factory installed components (e.g.  
on-board computer). Do not tap into these leads to provide  
power for this unit. When connecting the CDM-7859R/  
CDM-7858R/CDM-7856R to the fuse box, make sure the  
fuse for the intended circuit of the CDM-7859R/CDM-  
7858R/CDM-7856R has the appropriate amperage. Failure  
to do so may result in damage to the unit and/or the  
vehicle. When in doubt, consult your ALPINE dealer.  
The CDM-7859R/CDM-7858R/CDM-7856R uses female  
RCA-type jacks for connection to other units (e.g.  
amplifier) having RCA connectors. You may need an  
adaptor to connect other units. If so, please contact your  
authorized ALPINE dealer for assistance.  
DRILLING HOLES.  
When drilling holes in the chassis for installation, take  
precautions so as not to contact, damage or obstruct pipes,  
fuel lines, tanks or electrical wiring. Failure to take such  
precautions may result in fire.  
DO NOT USE BOLTS OR NUTS IN THE BRAKE OR  
STEERING SYSTEMS TO MAKE GROUND  
CONNECTIONS.  
Bolts or nuts used for the brake or steering systems (or  
any other safety-related system), or tanks should NEVER  
be used for installations or ground connections. Using  
such parts could disable control of the vehicle and cause  
fire etc.  
KEEP SMALL OBJECTS SUCH AS BATTERY OUT OF  
THE REACH OF CHILDREN.  
Swallowing them may result in serious injury. If  
swallowed, consult a physician immediately.  
Be sure to connect the speaker () leads to the speaker ()  
terminal. Never connect left and right channel speaker  
cables to each other or to the vehicle body.  
IMPORTANT  
DO NOT INSTALL IN LOCATIONS WHICH MIGHT  
HINDER VEHICLE OPERATION, SUCH AS THE  
STEERING WHEEL OR GEARSHIFT.  
Doing so may obstruct forward vision or hamper  
movement etc. and results in serious accident.  
Please record the serial number of your unit in the  
space provided below and keep it as a permanent  
record. The serial number plate is located on the  
bottom of the unit.  
SERIAL NUMBER:  
INSTALLATION DATE:  
INSTALLATION TECHNICIAN:  
PLACE OF PURCHASE:  
18-EN  
3
Slide the CDM-7859R/CDM-7858R/CDM-7856R  
into the dashboard. When the unit is in place,  
make sure the locking pins are fully seated in the  
down position. This can be done by pressing  
firmly in on the unit while pushing the locking pin  
down with a small screwdriver.This ensures that  
the unit is properly locked and will not accidentally  
come out from the dashboard. Install the  
Detachable Front Panel.  
Installation  
1
Rubber Cap  
(Included)  
Hex Bolt  
(Included)  
Bracket  
Dashboard  
Mounting sleeve  
(Included)  
CDM-7859R/CDM-7858R/  
CDM-7856R  
Remove the Detachable Front Panel (refer to  
page 4). Slide mounting sleeve from main unit  
(see Removal Procedure below). Slide the  
mounting sleeve into the dashboard.  
Lock pin  
Removal  
1
2
Remove the detachable front panel.  
Use a small screwdriver (or similar tool) to  
push the locking pins to the upposition (see  
Fig. 3). As each pin is unlocked, gently pull out  
on the unit to make sure it does not re-lock  
before unlocking the second pin.  
2
Metal Mounting Strap  
Screw  
3
Pull the unit out, keeping it unlocked as you do so.  
Bolt Stud  
<JAPANESE CAR>  
Hex Nut (M5)  
Front frame  
CDM-7859R/CDM-7858R/  
CDM-7856R  
When your vehicle has the Bracket, mount the  
long hex bolt onto the rear panel of the CDM-  
7859R/CDM-7858R/CDM-7856R and put the  
Rubber Cap on the hex bolt. If your vehicle does  
not have the Mounting Support, reinforce the  
head unit with the metal mounting strap (not  
supplied). Connect all the leads of the CDM-  
7859R/CDM-7858R/CDM-7856R according to  
details described in the CONNECTIONS section.  
Screws (M5 × 8)  
(Included)  
CDM-7859R/CDM-7858R/  
CDM-7856R  
NOTE  
For the screw , provide a proper screw to the chassis  
installing location.  
Mounting Bracket  
19-EN  
Installation and Connections  
Connection  
Antenna  
1
ISO Antenna Plug  
2
To vehicle phone  
(Pink/Black)  
AUDIO INTERRUPT IN  
3
(Blue/White) REMOTE TURN-ON  
To amplifier or equalizer  
To power antenna  
Ignition Key  
4
5
(Red) IGNITION  
(Black) GND  
(Blue) POWER ANT  
7
6
8
9
(Yellow) BATTERY  
Battery  
A
DIN Connector PIN Configuration  
#
&
"
Shield Ground  
!
lgnition  
$
Power Supply Ground  
Data Ground  
Battery  
Data Bus  
Rch  
Lch  
Sig Gnd  
A
Speakers  
Rear Left  
Green  
)
Green/Black  
~
+
White  
Front Left  
White/Black  
Grey/Black  
Grey  
,
-
Front Right  
.
(
Violet/Black  
Violet  
/
:
Rear Right  
%
CD changer  
(Sold separately)  
Speakers  
Amplifier  
(Sold Separately)  
Rear or  
Subwoofers ∗  
;
For details on how to set the Subwoofer to ON/OFF, see "Subwoofer On and Off" on page 5.  
20-EN  
1 ISO Antenna Convertor Plug  
" Remote Control Interface Connector  
To remote control interface box.  
# Rear/Subwoofer Output RCA Connectors  
RED is right and WHITE is left.  
2 Audio Interrupt In Lead (Pink/Black)  
Connect this lead to the Audio Interface output of a  
cellular phone which provides ground shorting when  
a call is received.  
$ DIN Connector  
If a device having the interrupt feature is connected,  
audio will be automatically muted whenever the  
interrupt signal is received from the device.  
3 Remote Turn-On Lead (Blue/White)  
Connect this lead to the remote turn-on lead of your  
amplifier or signal processor.  
4 Switched Power Lead (Ignition) (Red)  
Connect this lead to an open terminal on the vehicles  
fuse box or another unused power source which  
provides (+) 12V only when the ignition is turned on  
or in the accessory position.  
Connect this to the DIN connector on the CD changer.  
% DIN Extension Cable (Included with CD changer)  
NOTE  
Older Alpine CD changer came with standard, straight  
type DIN connectors. In installations where an L-type  
connector would simplify installation, the Alpine 491002  
Adaptor can be used (sold separately).  
& Power Supply Connector  
( ISO Connector (Speaker Output)  
) Left Rear (+) Speaker Output Lead (Green)  
~ Left Rear () Speaker Output Lead (Green/  
Black)  
5 Ground Lead (Black)  
+ Left Front (+) Speaker Output Lead (White)  
, Left Front () Speaker Output Lead (White/Black)  
- Right Front () Speaker Output Lead (Grey/  
Black)  
Connect this lead to a good chassis ground on the  
vehicle. Make sure the connection is made to bare  
metal and is securely fastened using the sheet metal  
screw provided.  
. Right Front (+) Speaker Output Lead (Grey)  
/ Right Rear () Speaker Output Lead (Violet/  
Black)  
6 Power Antenna Lead (Blue)  
Connect this lead to the +B terminal of your power  
antenna, if applicable.  
: Right Rear (+) Speaker Output Lead (Violet)  
; RCA Extension Cable (sold separately)  
NOTE  
This lead should be used only for controlling the  
vehicle's power antenna. Do not use this lead to turn on  
an amplifier or a signal processor, etc.  
7 Fuse Holder (15A)  
8 Battery Lead (Yellow)  
Connect this lead to the positive (+) post of the  
vehicles battery.  
9 ISO Power Supply Connector  
! Antenna Receptacle  
Connect to the supplied ISO antenna convertor plug.  
To prevent external noise from entering the audio system.  
Locate the unit and route the leads at least 10cm away from the car harness.  
Keep the battery power leads as far away from other leads as possible.  
Connect the ground lead securely to a bare metal spot (remove any paint, dirt or grease if necessary) of the car  
chassis.  
If you add an optional noise suppressor, connect it as far away from the unit as possible. Your Alpine dealer carries  
various noise suppressors, contact them for further information.  
Your Alpine dealer knows best about noise prevention measures so consult your dealer for further information.  
21-EN  

Motorola Z8 3G User Manual
Motorola A845 User Manual
Kenwood KDC W241 User Manual
ITT Rule Computer Accessories IDL Version 70 User Manual
DeLonghi DC50T User Manual
DeLonghi Coffee Maker EC330S User Manual
Behringer UMA255 User Manual
APC SMT3000RMI2U User Manual
Aiwa NSX AJ14 User Manual
321 Studios Oil Furnace FH110D48E User Manual