Quick Guide
POS50 Series
April. 2006 (V1.0)
1
Chapter 1
Unpacking
Unpacking the POS Terminal, please check the following items are presented and in good conditions:
a. Main Unit
b. CD: User’s Manual & Driver Bank
The driver disk includes user’s manual and all of driver software of peripheral, such as touch
screen, VGA, LAN….etc.
c. Power Cord: Optional USA, Europe, UK or Australia type.
3
Chapter 2
Specification
2.1 Specification
The POS system configuration including 8.4”, 12.1” and 15” as followings,
Main Board
CPU
AMD Geode LX-800
System Memory
1 x DDR400 SO-DIMM Socket, up to 1GB
Display
TFT LCD Size
Brightness
8.4”
12.1”
15”
180nits
300nits
250nits
1024x768
Resolution
800x600
Touch Screen
5 Wire Resistive Type
Storage Device
No Support
HDD
2.5” Slim Type
Compact Flash
1 x Type II, Slot
I/O Ports
Serial
USB
2x RS232 (Pin9 with 5/12V Selected)
2x RS232 (Internal Touch & MSR Used)
2 x USB2.0
2 x USB2.0 Internal Stand By
LAN
1 x RJ45, 10/100 Base-T
1 x RJ11 (Power 12V)
AC97 2.0 Compliant, Speaker 2 x 2W
Others
Cash Drawer
Audio
Power Supply
Internal Adapter, 12V / 80W, ATX
FCC / CE
Compliance
Weight (Kgs)
1.8
3.2
4.4
Operating Temperature
5 ~ 40 ﾟ C
Optional Accessory
802.11g, USB I/F
Wireless LAN
MSR
ISO STD 3 Tracks, KB I/F
4
2.2 I/O ports
Following ports show all of ports of system.
a. DC IN: connector for power adapter input 12VDC.
b. Cash Drawer: provide IO port address 280H for cash drawer control by RJ11.
c. COM 1/2: standard D sub serial port with 5V / 12VDC selected on pin9.
d. LAN: 10 / 100 base-T by RJ45 connector.
e. USB: play and plug USB 2.0.
f. Power Switch: toggle switch for power on.
g. MSR PS2: for attached MSR PS2 interface connection.
5
Chapter 3
Installation
3.1 OS Installation
3.1.1 Embedded WEPOS / WinCE
CD ROM Driver with USB interface
If you bought the system including WEPOS / WinCE operation system, please follow up
below procedure.
a. Connect CDROM to the USB port of system.
b. Turn on the system and enter completely into WEPOS.
c. Up load your application software into WEPOS platform.
d. Complete installation and execute the AP.
Note: We suggest that you buy and use factory recommend CD-ROM with USB interface while you are
placed first sample unit.
3.1.2 Win XP
If you would like to install the Win XP, we suggest the system’s configuration include 256MB RAM and
HDD.
a. Connect CDROM to the USB port of system.
b. Turn on the system and press “ Del” key enter to CMOS setup.
c. Select icon “Advanced BIOS Features“.
Phoenix – Award BIOS CMOS Setup Utility
¾
¾
¾
¾
¾
¾
¾
Standard CMOS Features
Advanced BIOS Features
Advanced Chipset Features
Integrated Peripherals
Power Management Setup
PnP / PCI Configuration
PC Health Status
ESC: Quit
F10: Save & Exit Setup
6
d. Select “First Boot Device” to “USB-CDROM”.
e. Press “F10” to save setup change and quit.
f. Install the Win XP, follow up the OS installation guide.
Phoenix – Award BIOS CMOS Setup Utility
Advanced BIOS Features
Virus Warning
[Disabled]
[Enabled]
[Disabled]
[USB-CDROM]
[HDD-0]
[CDROM]
[Enabled]
[On]
CPU Internal Cache
Boot From Lan Control
First Boot Device
Second Boot Device
Third Boot Device
Boot Other Device
Boot UP NumLock Status
Gate A20 Option
[Fast]
Typematic Rate Setting
Typematic Rate (Chars/Sec)
Typematic Delay (Msec)
Security Option
[Disabled]
6
250
[Setup]
OS Select For DRAM > 64MB
Small Logo(EPA) Show
[Non-OS2]
[Disabled]
3.2 Touch Driver Installation
Refer to list procedure of touch driver as followings, which is based on Win XP as example.
7
8
9
10
11
3.3 MSR / I-Button PS2 interface Installation
a. The MSR Kit included Bracket and Module.
b. Turn the system to rear side.
c. Screw up the bracket on the fixed hole.
12
d. Screw up the MSR module and connect the cable into connector.
3.4 Cash Drawer
For the 3rd version M/B which is released from end of April. The cash drawer pin assignment
as followings. In order to program the cash drawer easily, we also provide OPOS driver.
Pin
1
Assignment
GND
2
3
4
Data Out
Data In
12V
5
NC
6
GND
Note:
I/O Address: 280H for Cash Drawer which is controlled by
Data bit: Data IN =>Bit 0, Data OUT=>Bit 1
Normally recommend drive the Cash Drawer by out FF to I/O 280H.
13
Chapter 4
Jumper Definition
4.1Main Board Layout
14
4.2 LCD Power setting
•
JP2: This jumper is for the setting of LCD panel voltage.
JP2 Description
2-4
4-6
+3.3V
+5V
•
JP2: This jumper is for the setting of LCD panel shift clock.
JP2 Description
1-3
3-5
Inverted
Normal
4.3 COM1/2 Power Selection
JP3
1-3
3-5
7-9
2-4
4-6
8-10
Description
COM1 RI Pin Use +12V
COM1 RI Pin Use +5V
COM1 RI Pin Use RI
COM2 RI Pin Use +12V
COM2 RI Pin Use +5V
COM2 RI Pin Use RI
4.4 COM3 Power Selection
JP4
Description
1-2
5-6
3-4
COM3 RI Pin Use +12V
COM3 RI Pin Use +5V
COM3 RI Pin Use RI
4.5 IDE Disk Drive Connector
•
a. CN10: Primary IDE Connector (Pitch 2.00 mm)
PIN
1
Description
RESET#
PIN
2
Description
GROUND
3
5
7
9
DATA 7
DATA 6
DATA 5
DATA 4
DATA 3
DATA 2
DATA 1
DATA 0
4
6
8
DATA 8
DATA 9
DATA 10
DATA 11
DATA 12
DATA 13
DATA 14
DATA 15
N/C
GROUND
GROUND
GROUND
GROUND
GROUND
N/C
10
12
14
16
18
20
22
24
26
28
30
32
11
13
15
17
19
21
23
25
27
29
31
GROUND
IDE DREQ
IOW#
IOR#
IDE DRDYA
IDE DACK
INTERRUPT
15
33
35
37
39
41
43
SA1
SA0
HDC CS0#
HDD ACTIVE#
VCC5
34
36
38
40
42
44
CABLE_80P
SA2
HDC CS1#
GROUND
VCC5
GND
b. CN8: Compact Flash Storage Card Socket
PIN
Description
GROUND
PIN
Description
1
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
CARD DETECT1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
D3
D4
D5
D6
D7
CS1#
N/C
GROUND
N/C
N/C
N/C
VCC
N/C
N/C
N/C
N/C
A2
A1
A0
D0
D1
D2
N/C
D11
D12
D13
D14
D15
CS3#
N/C
IOR#
IOW#
OBLIGATORY TO PULL HIGH
IRQ15
VCC
SLAVE
N/C
RESET#
IORDY
DRQ
ACK
ACTIVE#
PDIAG#
D8
D9
D10
CARD DETECT2
GROUND
4.6Fan Connector
These connectors can supply +5V/500mA to the cooling fan. In the connector there have a “rotation” pin. The
rotation pin is to get the fan’s rotation signal to system. So the system BIOS could recognize the fan speed.
Please note only specified fan offers the rotation signal.
•
CN11 : Fan connector
PIN
1
2
Description
Rotation Signal
VCC5
3
GND
16
4.7Serial Ports
The system provides three high speed NS16C550 compatible UARTS with Read/Receive 16 byte FIFO. Four
com ports are in IO connector.
•
•
COM1: CN25 DB9-pin header
COM2: CN26 DB9-pin header
PIN
Description
DATA CARRIER DETECT (DCD)
RECEIVE DATA (RXD)
TRANSMIT DATA (TXD)
DATA TERMINAL READY (DTR)
GROUND
DATA SET READY (DSR)
REQUEST TO SEND (RTS)
CLEAR TO SEND (CTS)
RING INDICATOR (RI)
1
2
3
4
5
6
7
8
9
•
COM2: CN27 pin header 2.0mm
PIN
Description
DATA CARRIER DETECT (DCD)
RECEIVE DATA (RXD)
TRANSMIT DATA (TXD)
DATA TERMINAL READY (DTR)
GROUND
1
2
3
4
5
DATA SET READY (DSR)
REQUEST TO SEND (RTS)
CLEAR TO SEND (CTS)
RING INDICATOR (RI)
6
7
8
9
10
11
12
13
14
N/C
+5V
N/C
+12V
GROUND
•
COM3: CN24 for Card Reader.
PIN
Description
1
2
GROUND
+5V
3
RXD3
4
TXD3
5
6
7
8
KB_DATA_OUT
KB_CLK_OUT
KB_DATA_IN
KB_CLK_IN
RI3
9
10
11
12
13
14
15
DTR3
CTS3
RTS3
DSR3
DCD3
KB_EN
4.8Power Connector
17
•
•
CN21: Power Connector Input
PIN Description PIN Description
1
2
GND
GND
3
4
Power IN(+12V)
Power IN(+12V)
CN28: Power Connector Output
PIN Description PIN Description
1
2
+5V
GND
3
4
GND
+12V
4.9VGA Connector
The pin assignments are as following.
•
CN3: 10-pin Connector
PIN
1
Description
RED
PIN
2
Description
DDCDAT
3
5
7
9
GREEN
BLUE
HSYNC
VSYNC
4
6
8
10
DDCCLK
GROUND
GROUND
GROUND
4.10LCD & INVERTOR Connector
The pin assignments are as following.
CN2: 15-pin Connector for LCD
PIN
1
Description
LVD0-
2
LVD0+
3
4
GROUND
N/C
5
N/C
6
7
GROUND
LVD1-
8
LVD1+
9
LVD2-
10
11
12
13
14
15
LVD2+
GROUND
LVDCK-
LVDCK+
LCD_VCC
LCD_VCC
•
CN1: 6-pin Connector for INVERTOR
PIN
1
Description
+12V
2
BKL_ Enable
18
3
4
5
6
GROUND
N/C
+12V
GROUND
4.11USB Port Connector
•
•
•
•
USB1: CN22
USB2: CN23
USB3: CN31
USB4: CN15
PIN
1
Description
+5V
2
3
4
DATA-
DATA+
GROUND
4.12 Audio Connector
The pin assignments are as following.
•
CN17: LINE_OUT connector
PIN
Description
1
2,3
4
LINE_OUT_L
LINE_OUT_GROUND
LINE_OUT_R
•
CN16: MIC_IN connector
PIN
1
Description
MIC_IN
2
GROUND
4.13 LED
The pin assignments are as following.
•
CN6: LED connector
PIN Description PIN
Description
POWER LED+
HDD LED+
1
3
5
POWER LED-
HDD LED-
LAN LED-
2
4
6
LAN LED+
4.14 Power & Reset Button
•
CN13: ATX Power button
PIN
Description
1
2
ATX Power button +
ATX Power button -
•
CN5: Reset button
19
PIN
Description
1
2
Reset button +
Reset button -
4.15 Cash Drawer Connector
•
CN20
PIN
DESCRIPTION
PIN
DESCRIPTION
1
3
5
GROUND
DIN_0
N.C
2
4
6
DOUT_0
+12V
GROUND
4.16 Keyboard / Mouse connector
•
CN19: Keyboard/Mouse Connector
PIN
DESCRIPTION
1
2
3
4
5
6
VCC5
MOUSE DATA
MOUSE CLK
KEYBOARD DATA
KEYBOARD CLK
GROUND
4.17 Touch Connector
The pin assignments are as following.
•
CN29: Touch 5W connector
PIN
DESCRIPTION
1
2
3
4
5
RT
RL
SG
LT
LL
•
CN30 : Touch 7W connector
PIN
DESCRIPTION
1
2
NC
U
3
4
NC
R
5
6
NC
A
7
8
NC
L
9
NC
B
NC
D
NC
C
NC
10
11
12
13
14
15
20
|
Motorola MOTO 68014173001 User Manual
LG Electronics P500H User Manual
Kenwood KDC W657 User Manual
Intel 80gb Oem Dc S3500 Hd Ssd SSDSC1NB080G401 User Manual
HTC S743 User Manual
Grindmaster SHUTTLE APBIC 330V2 User Manual
Freecom Technologies Mobile Hard Drives User Manual
Brinkmann 844 0350 0 User Manual
Black & Decker SDC740 User Manual
Andis Company 60040 User Manual