Model : M2180
Instruction Manual
Bluetooth Car Stereo Compact Disc
MP3/CD-RW/CD-R/CD SD/MMC USB
Media Player with PLL FM Stereo Radio
Radio Data System (RDS)
Detachable Front Panel System
Content
Function …………………..………. 2
Warnings ………………………….. 4
Drawings ………………………….. 5
Location …………………………… 6
Installation
LCD display …………………….. 17
Panel release button ………….. 17
CD slot …………………………… 18
CD eject button …………………. 18
Pause button . ……………………18
Intro button ………………………. 18
Precautions ……………………...7
Mounting example……………….7 Repeat button……………………..18
Detaching and attaching Random button……………………18
The front panel……………………8 Select MP3 Files …………………. 19
ISO connector……………………9 Reset ..………………………………19
Maintenance……………………..10 DSP ………………………………….20
Operation
Bluetooth ……….………….……… 21
Bluetooth ………………………….. 22
Bluetooth ……………………………23
Specifications ………………………24
Power on/off……………………..11
Select
Volume Knob
TA seek/TA alarm………………..11
PI Mute/PI Sound………………..12
Retune L/S……………………….12
MASK DPI ……………………….13
Beep Mode ….…………………..13
Preset Stations …………………13
RDS Function
AF/REG function………………...14
TA function……………………….15
PTY function……………………..15
Display…………………………….15
Mode button………………………16
Band/Loud button……………….16
Automatic or manual tuning……16
A/PS…………………………………17
-3-
Warnings
The exclamation point within the triangle is a warning sign alerting
the user of important instructions accompanying the product.
The lightening flash with arrowhead symbol within the triangle is a
warning sign alerting the user of voltage inside the unit.
The reduce the risk of electric shock, do not remove the cover. No
user serviceable parts inside the unit. Refer all servicing to qualified
personnel.
Invisible laser radiation when the unit is opened or interlocks defeated.
Avoid exposure to laser beam. User of controls, adjustments or procedures
other than those specified herein may result in hazardous
radiation exposure.
This unit must not be exposed to moisture or rain.
This unit should be positioned so that it is properly ventilated.
Do not expose this unit to direct sunlight or heat radiating sources.
-4-
Drawings
-5-
Location
LOCATIONS OF CONTROLS
1. POWER ON/OFF
2. FUNCTION SELECT BUTTON
3. VOL UP/VOL DOWN
4. PRESET STATIONS (1, 2, 3, 4, 5, 6)
5. AF FUNCTION (ALTERNATIVE FREQUENCIES)
6. TA FUNCTION (TRAFFIC ANNOUNCEMENT)
7. PTY FUNCTION (PROGRAM TYPE)
8. DISPLAY BUTTON (CLK)
9. MODE BUTTON (MODE)
10. BAND BUTTON (BND)
11.12. AUTOMATIC OR MANUAL TUNING (FREQ UP ꢀ OR FREQ DOWN ꢁ /
CD TRACK/SEARCH BUTTON
13. AUTO SEEK SEARCH TUNING (AS/PS)
14. LCD DISPLAY
15. PANEL RELEASE BUTTON ( )
16. CD SLOT
17. CD EJECTS BUTTON ( )
18. PAUSE BUTTON
19. INTRO BUTTON (PREVIEW ALL TRACKS)( INT)
20. REPEAT BUTTON (RPT)
21. RANDOM BUTTON (RDM)
22.23. -/+10 TRACK SEARCH DOWN/UP
24. RESET BUTTON
25. BLUETOOTH FUNCTION
26. SD/MMC CARD JACK
27. USB JACK
-6-
Installation
INSTALLATION
PRECAUTIONS
Choose the mounting location carefully so that the unit will not interfere with the
normal driving functions of the driver. Avoid installing the unit where it would be
subject to high temperatures, such as from direct sunlight or hot air from the heater,
or where it would be subject to dust, dirt or excessive vibration.
Use only the supplied mounting hardware for a safe and secure installation.
Be sure to remove the front panel before installing the unit.
Mounting angle adjustment
Adjust the mounting angle to less than 30.
MOUNTING EXAMPLE
Installation in the dashboard
Keep the release key in the safe place as you may need it in future to
remove the unit from the car.
-7-
Installation
Detaching and attaching the front panel
The front panel of this unit can be detached in order to prevent the unit from being
stolen.
DETACHING THE FRONT PANEL
Before detaching the front panel, be sure to press the PWR button to turn off the
unit first. Then press the button and detach the panel by pulling it towards you as
illustrated.
Note: Be sure not to drop the panel when detaching it from the unit.
ATTACHING THE FRONT PANEL
Make sure the front panel is the right way up when attaching it to the unit as it
cannot be attached upside down.
Bring side B of panel to side A of main unit.
Inset the panel in and push until it clicks. Panel is attached.
Notes:
Do not press the front panel hard against the unit when attaching it. It can be
easily attached by pressing it lightly against the unit.
When you carry the front panel with you, put it in the supplied front panel case.
Do not press hard or give excessive pressure to the display window of the front
panel when attaching it to the unit.
-8-
Installation
ISO CONNECTOR
RCA Jack Line Out (Rear/Front)-Gray DUAL
:Red(F/R right) DUAL
:White(F/R left) DUAL
Bluetooth microphone Jack:
:Yellow single
CONNECTOR A
1.
2.
3.
4. MEMORY +12V
5. AUTO ANTENNA OUTPUT
6.
7. +12V (TO IGNITION KEY)
8. GROUND
The connector A no.7 must be connected by car ignition key in order to
avoid that car battery becomes weak when the car will be not used for
long period.
CONNECTOR B
1. REAR RIGHT SPEAKER (+)
2. REAR RIGHT SPEAKER (-)
3. FRONT RIGHT SPEAKER (+)
4. FRONT RIGHT SPEAKER (-)
5. FRONT LEFT SPEAKER (+)
6. FRONT LEFT SPEAKER (-)
7. REAR LEFT SPEAKER (+)
8. REAR LEFT SPEAKER (-)
-9-
Installation
Maintenance
FUSE REPLACEMENT
If the fuse blows, check the power connection and replace the fuse. If the fuse
blows again after the replacement, there may be an internal malfunction. In this
case, consult your nearest repairing center.
Warning
Use the specified amperage fuse for each lead. Use of a higher amperage fuse may
cause serious damage.
-10-
Operation
OPERATING INSTRUCTIONS
1. POWER ON/OFF
By pressing this key (1), the unit is switched on and off.
This unit is turned on by pressing any key.
2. SELECT (SEL)
3. VOLUME KNOB
Rotate Volume up/down knob to control the VOLUME to select other functions,
press the SEL (2) button shortly until the desired functions is shown on the display.
Figure 1 shows how control functions are selected using the SEL button.
Fig. 1 Selection of sound control functions
1. VOLUME 2. SELECT3. BASS 4. TREBLE 5. BALANCE 6.FADER
To increase or decrease the volume by rotating the volume knob. These buttons
can be used to adjust the BASS, TREBLE, BALANCE and FADER.
(1) TA SEEK/TA ALARM (2)
When press the SEL button (2) for more than 2 seconds it is activated as selecting
mode of these function.
TA SEEK Mode or TA ALARM mode is selected by rotating the volume knob.
-11-
Operation
TA SEEK mode:
When newly turned station does not receive TA information for 5sec, the radio
retunes to next station which has not the same station (PI) as the last station, but
has the TA information. In TA seek mode, the current station can be changed to
the completely different station be cause the unit searches TA station when the field
strength of the current station is very weak, or the current station has no TA signal.
-TA ALARM mode:
Any automatic retune mode is not activated, just can be heard Beep sound.
(2) PI MUTE / PI SOUND (2)
When press the SEL button for more than 2 seconds, it is activated as selecting
mode of these function.
(3) RETUNE L/S
When press the SEL button for more than 2 seconds, it is activated as selecting
mode of these function.
(4) MASK DPI (2)
When press the SEL button for more than 2 seconds, it is activated as selecting
mode of these function.
-12-
Operation
MASK DPI: masked only the AF which has different PI.
MASK ALL: masked the AF which has different PI and
NO RDS signal with field strength.
(5)BEEP MODE (2)
When press the SEL button for more than 2 seconds, it
is activated as selecting mode of these function.
(6)DSP MODE (2)
When press the SEL button for more than 2 seconds, it
is activated as selecting mode of these function.
4. PRESET STATIONS (1, 2, 3, 4, 5, 6)
(A) RADIO MODE:
When press short, these keys select a preset station directly. When press longer
than 1 sec., current station is stored in preset memory bank. When PTY mode is
selected, the PTY switch is shared as follows:
PTY music group---PTY speech group---OFF
MUSIC
SPEECH
1. POP M, ROCK M
2. EASY M, LIGHT M
3. CLASSICS, OTHER M
4. JAZZ, COUNTRY
5. NATION M, OLDIES
6. FOLK M
1. NEWS, AFFAIRS, INFO
2. SPORT, EDUCATE, DRAMA
3. CULTURE, SCIENCE, VARIED
4. WEATHER, FINANCE, CHILDREN
5. SOCIAL, RELIGION, PHONE IN
6. TRAVEL, LEISURE, DOCUMENT
-13-
Operation
(B) CD/MP3/SD/MMC/USB PLAYER MODE:
1. PAUSE
2. INTRO
3. REPEAT 4. RANDOM
5. -10 6. +10
USING THE RDS FUNCTION
What is RDS?
The RDS (Radio Data System) is a digital information system developed by the
EBU (European Broadcast Union). Piggy-backed on normal FM broadcasts, RDS
offers a variety of information services and automatic retuning functions for
RDS-compatible car stereos.In1988, RDS became available in the United Kingdom,
France, West Germany, Ireland and Sweden. Test trans-missions are being
conducted in many other European countries. It is expected that RDS will be
available in most western European countries in the near future.
5. AF/REG function (ALTERNATIVE FREQUENCIES)
When press short, AF/REG switching mode is selected.
When AF/REG switching mode is selected, the radio checks the signal strength of
the AF all the time. When press long, it is activated as regional mode ON/OFF.
-Regional mode ON:
AF switching or PI SEEK is implemented to the station which have all PI codes
same as current station. REG segment is turned on in LCD display.
-Regional mode OFF
The regional code in the format of PI code is ignored when AF switching or PI SEEK
is implemented.
-14-
Operation
6. TA function (TRAFFIC ANNOUNCEMENT)
When press short, it is activated as TA mode on or off.
When TA mode is on and traffic announcement is transmitted.
-When the unit is in CD/MP3 mode, it will switch to radio mode temporarily.
-If the volume level was under the threshold point, it will be raised to the threshold
point.
-When TA station is received, A segment is turned on in LCD display.
7. PTY function (PROGRAM TYPE)
PTY MUSIC---PTY SPEECH---PTY OFF
While selecting PTY type, its selection is implemented by preset buttons as
described in preset key. When PTY is selected, the radio starts to search
corresponding PTY information, and stops if the corresponding PTY information is
detected.
8. DISPLAY (DISP)
Selects radio frequency, clock display and PTY NONE.
To set the clock:
(1). with clock display selected, hold down the "DISP" button until clock display
starts flashing.
(2). Rotate the volume knob to change minutes and hours.
(3). Press "DISP" button to start the clock.
When this key is pressed it is operated as the conversion of each display mode as
follow.
1) Incase of receiving RDS station
TUNER MODE
PS---PTY---FREQ---CT
CD/MP3 PLAYER MODE
CDP---PS---PTY---FREQ---CT
-15-
Operation
2) In case of receiving NON RDS station
RADIO MODE
CLOCK---FREQ ---NO PTY
CD/MP3 PLAYER MODE
CDP---FREQ---CT---NO PTY
Each display time is several seconds, and come back to1’st position after several
seconds.
CT=clock time
FREQ=frequency
9. MODE BUTTON (MODE)
By pressing this key, user can select RADIO mode or CD/MP3/SD/MMC/USB
PLAYER mode.
10. BAND BUTTON (BND)
Each band is toggled cyclically by pressing this key FM1-FM2-FM3. When press
longer than 1 sec, they are operated as LOUD ON or LOUD OFF.
11.12. AUTOMATIC OR MANUAL TUNING (FREQ UP :
OR FREQ DOWN 9 )
(A) RADIO MODE
When press short, these keys are operated as MANUAL tuning mode.
When press longer than 1 sec., they are operated as SEEK tuning mode.
(B) CD/MP3/SD/MMC/USB PLAYER MODE
When press short, they are operated as TRACK UP/DOWN mode.
When press longer than 1 secretary, they are operated as CUE or REVIEW mode.
-16-
Operation
13. AUTO SEEK SEARCH TUNING (AS/PS)
By pressing shortly, the radio searches for each preset Station.
When field strength level is bigger than the threshold level of stop level, the radio is
holding at that preset number for 5 secretaries.
With releasing mute, and then searches again. By pressing longer than 1sec and
then 6 strongest stations are preset to the corresponding preset number.
When AS operation is finished, the radio executes the preset scan.
14. LCD DISPLAY
The liquid Crystal Display will display the current state of the unit.
15. PANEL RELEASE BUTTON
Press this button and the left-hand part of the panel will be released.
CD CONTROL LOCATION OF PARTS
11. 12. SKIP TRACK/SEARCH BUTTON
FORWARD AND REVERSE TRACK SEARCH
(or changing songs)
Press the SKIP button( TUN ꢁ or TUN ꢀ ) during play
to go to the desired track(song).
TUN ꢀ ...REVERSE
TUN ꢁ ...FORWARD
Press and hold the SKIP button (TUN ꢁ or TUN ꢀ) during play to scan the disc
at high speed. When the desired music section of the disc is found, release the
button. Normal play will resume. When CD/MP3 play is finished, CD/MP3 mode
automatically changes to FIRST TRACK.
-17-
Operation
16. CD SLOT
17. CD EJECT BUTTON
Press the EJECT button (17) to remove the CD.
18. PAUSE BUTTON
During PLAY mode, press PAUSE button (18) to PAUSE.
Press it again to resume play.
19. INTRO BUTTON (Preview all Tracks)
When this button (19) is pressed, INT indication is displayed and the first several
seconds of each track of the disc are played.
Press again to stop intro and listen to track.
20. REPEAT BUTTON (RPT)
When this button is pressed, RPT indication is displayed and play of the selected
track will be continually repeated until the Track Repeat mode is cancelled by
pressing RPT button (20) again.
21. RANDOM BUTTON (RDM)
When this button is pressed, RDM indication is displayed and each track of the disc
are played in random instead of normal progression. To cancel RANDOM mode,
press RDM button (21) again.
22, 23. 10 TRACK DOWN/UP SELECT:
(In case of MP3/SD/MMC/USB files)
5: 10 TRACK DOWN
6: 10 TRACK UP
-18-
Operation
HOW TO SELECT MP3 FILES
1. Searching Track:
Press "AS/PS" , then searching track is activated.
Press "SEL", then the first digit is blinking.
With "VOL
Press "SEL", then the first digit is fixed and second digit is blinking.
With "VOL / VOL " knob, select 2' nd and 3' rd respectively.
/ VOL
"knob, select first digit you want.
Then automatically the song you selected will start.
2. Searching File Name:
Press "AS/PS" twice, then file search is activated.
Press "SEL", then the first directory is displayed.
With "VOL
Press "SEL" again, then the directory is fixed and the first file name
With "VOL / VOL " knob, you can select the file you want is displayed.
/ VOL
" knob, you can select the directory you want.
Press "SEL", Then The Song you selected will start.
3. Searching Character:
Press "AS/PS" 3 times, then character search mode is activated.
Press enter "SEL" button, then "A" character is displayed.
With "VOL
/ VOL
" knob, you can select the letter you want.
Press enter "SEL" key longer than 2 secretary.
Then song which has same character you selected is displayed.
With "VOL
/ VOL
" knob, you can select the song you want.
Press enter "SEL" key, then the song you selected will start.
-19-
Operation
24. RESET
Reset button (24) is placed on the housing. The reset
button is to be activated for the following:
Initial installation of the unit when all
wiring is completed.
All the function button do not operated.
Error symbol on the display.
25. Bluetooth function
1: Bluetooth Multi-Function key
- Pairing
- Pick up call
- Ending call
- Redial
- Voice dialing
2: Speaker Mute
3: Bluetooth status LED Indication
4. Microphone
5. Volume control
INTRODUCTION
The M2180 Bluetooth car CD/MP3 player not only provide the audio function but
also hands-free Communication using cell phones .This user guide can help you to
establishing a connection with your mobile phone, You need to have a phone with
embedded Bluetooth capability. The phone can be tucked away in your pocket or in
a bag while you handle incoming call and outgoing calls, and adjust the volume up
or down using the button on the car player. This device utilizes Bluetooth wireless
technology version V1.2 that supports Bluetooth Headset and/or Handsfree profile.
-20-
Operation
PAIRING
The M2180 Bluetooth device can store pairing info for 3 phone, pls make sure the
paired phone are not connect to the device when pairing the new mobile phone.
Make sure that you have paired the device with your Bluetooth phone before you
start to use it.
Step 1. check your mobile phone’s user guide, then find out the location of the
Bluetooth menu in your phone, and turn Bluetooth on.
Step 2. Press and hold the “
” the player display will show “Phone” ,then a
“do do” melody will be played, release the button, the blue light will flash
quickly.
Step 3. Perform “Bluetooth device discovery” on your mobile phone. It takes few
seconds to search for and find other Bluetooth devices around you.
Step 4. Phone display will show “Haoshengda” as found and ask for your
confirmation that you want ot pair it, pls confirm it, then Enter Passkey
“1234”(default) when your phone prompts your, The phone will start pair
with car player, then the phone will advise that pairing has been successful,
the blue LED will flash one time per 2 sec.
-21-
Operation
If pairing failed, the blue LED indication keeps flashing rapidly for 2 minutes,
during the period, please repeat step 3 to 4 for paring again, Over 2 minutes,
the blue LED will back to normal, and if a re-pairing is needed. Please refer to
step 2 to 4 above.
During pairing, if you want to stop the process, push the “
” for 2 sec,
then a “dn dn dn dn dn” down going melody will played, the player will back
to normal status.
NOTE: Most mobile phone show a Bluetooth linkage symbol on the display screen,
once M2180 and phone have successfully paired, you are ready to make and
receive call.
ANSWER A CALL
When player is on (Play music or radio)
When a call is coming, the music will stop, Player display will show” Phone”,
meanwhile the “do lu do lu,do lu do lu” up going melody will be played.
Auto answer: If the mobile phone set to auto answer under hands -free or headset
mode, the call will automatically after few rings or depends upon your mobile phone
setting.
Manual answer: Answer the call by simply push the “
” once .it will have “do”
sound, then start the conversation
When player is off (car is power on)
When call is coming, it will auto turn on the player, display will show “phone”,
meanwhile the “do lu do lu,do lu do lu” up going melody will be played.
Auto answer: If the mobile phone set to auto answer under hands -free or headset
mode, the call will automatically after few rings or depends upon your mobile phone
setting.
Manual answer: Answer the call by simply push the “
“do” sound, then start the conversation
” once, it will have a
-22-
Operation
ENDING A CALL
Simply push the “
” once to ending a call, after few sec, it will back to the
status before call. (For example, if the player is off before phone call, then after
phone call it will turn off automatically.)
LAST NUMBER REDIAL
While M2180 car player is in standby condition (not in conversation), press and hold
the “
” for 2 ~3 sec, and your phone will redial the last number.
VOICE DIALING
Voice dialing function on your phone must be turned on and voice tag must When
M2180 car player is in standby condition (not in conversation), Simply push (1 sec)
the “
” once, then CD player display will show “Phone”, then push
again (1 sec), it will come out “do” sound, then will prompt you to speak the
voice tag that was previously stored in the phone’s voice dial phone book.
SPEAKER MUTE & VOLUME CONTROL
Speaker mute: simply push “
” button for 1 sec, the speaker will mute,
push” ” again (1 sec), disable the speaker mute function.
Volume control: you can adjustment of speaker volume higher or lower by turning
the “Volume control wheel”.
Notice: M2180 Bluetooth device had built in DSP echo cancel technology, to
minimize echo and background noise, but please still don’t turning the volume too
high since it might interrupt with microphone and cause some echo.
-23-
Specification
SPECIFICATIONS
FM SECTION
Frequency range
Channel step
87.5-108.0MHz
50KHz
Intermediate frequency
10.7MHz
Sensitivity
2µVat 30 dB S/N
Stereo separation
>30dB
>60dB
Signal to noise radio
CD/MP3 PLAYER SECTION
Signal to Noise Ratio
Channel Separation
>60dB
>50dB (1 KHz)
20Hz-20KHz
Frequency Response
LINE-OUT
Output
300-800mV .
10KOhm
Impedance
GENERAL
Power Supply Voltage
Max Current Consumption
Max Output power
DC 12 Volts Negative Ground
15A
40W x 4 CH
Specifications and the design are subject to possible modification
without notice due to improvement.
If at any time in the future you should need to dispose of this product.
Please note that Waste electrical products should not be disposed of
with household waste.
Please recycle where facilities exist. Check with your Local Authority
or retailer for recycling advice. (Waste Electrical and Electronic
Equipment Directive)
-24-
|