XO Vision X348NT User Manual

R
X348NT  
PWR  
PWR  
TOUCH SCREEN 1-DIN 7 TFT LCD DVD PLAYER  
MADE IN CHINA  
Warnings and Precautions  
Warnings  
1
2
3
Only connect the unit to a 12V power supply with negative grounding.  
Never install the unit where the operation for safety driving is restrained.  
Never use the video display function in the front when driving to prevent the violation of laws  
regulations and also to reduce the risk of traffic accident except using for rear view video camera.  
4
5
Never expose the unit, amplifier, speakers to moisture or water to prevent electronic sparks or fires.  
Please don't change the fuse in the power cord without professional guidance, improper fuse may  
cause damage to this using unit or even cause fire.  
6
7
Please power off the unit at once and send it back to the after-sales service center or the dealer/  
distributor yo purchased from if one of the following symptoms is found:  
(a)NO audio output; (b)NO image output;(c)Water or other obstacle enters the unit; (d)Smoking;  
(e)Peculiar smell.  
To ensure safe driving, please adjust the volume to a safe and comfort level in case of emergency  
situations.  
2
Warnings and Precautions  
Precautions  
1
2
Never disassemble or adjust the unit without any professional guide. For details, please consult any professional car shop/  
dealer for inquiry.  
If the front panel or the TFT monitor is squalid, please use a clean silicone cloth and neutral detergent to wipe off the spot.  
Using a rough cloth and non-neutral detergent such as alcohol for cleaning may result in scratching or decoloration to the  
applicant.  
3
4
5
If any abnormal behavior of the unit is found, please refer to trouble shooting guide of this manual. If no relevant information is  
found , please press the [RESET] key on the front panel to resume factory default.  
If you have parked the car in hot or cold weather for a long time, please wait until the temperature in the car becomes normal  
before operating the unit.  
Using in-car heater in low temperature environment may result in beads coagulate inside the unit, DO NOT use the unit in this  
situation, eject the disc and wipe off the bead on the disc. If the unit still doesn't work after a few hours, please contact with  
after-sales service center.  
6
7
8
No fierce impact to the LCD monitor when it is in open position for preventing the damage to any mechanisms inside.  
To prevent the damage to the screen, avoid touching it with sharp objects.  
The monitor employs auto motorizing mechanism, please don't push, pull, or swivel the monitor manually to prevent damage  
to any mechanisms inside.  
9
To provide a clear demonstration and an alternative for easy understanding to the operation of this unit, graphic illustrations  
are used. However, these illustrations are some different from the actual images displayed in the unit.  
10 During operation the unit," "is displayed if the particular operation is not available or illegal.  
11 Operate the unit correctly according to this manual to prevent. Unnecessary problem. The guarantee won't be valid if the  
problem is caused by inappropriate operation.  
3
Electric Connection  
TV ANTENNAPLUG  
(Without TV tuner,  
without this wire.)  
CAR ANTENNA  
GRAY  
(RED)  
FRONT RIGHT RCA OUT  
FRONT LEFT RCA OUT  
REAR RIGHT RCA OUT  
(WHITE)  
(BLUE)  
GRAY  
GRAY  
(PURPLE)  
(YELLOW)  
(YELLOW)  
(WHITE)  
GRAY  
GRAY  
REAR LEFT RCA OUT  
VIDEO OUT  
BLACK  
BACK CAR VIDEO IN  
AUX LEFT IN  
BLACK  
BLACK  
BLACK  
Parking Brake Light (-)  
Back car detecting wire  
(Gray)  
(RED)  
AUX RIGHT IN  
VIDEO IN  
(YELLOW)  
(Brown)  
White/Black  
White  
To front left  
speaker  
Connect control for antenna or remote control for amplifier  
Ignition key  
switch  
(Blue)  
(Red)  
FRONT.L  
Gray/Black  
Gray  
To front right  
speaker  
ACC wire  
FRONT.R  
REAR.L  
Battery wire (Yellow)  
Green/Black  
Green  
To rear left  
speaker  
Car fuse box  
(main fuse)  
Ground wire(Black)  
Light wire  
(To car chassis)  
Battery  
Purple/Black  
Purple  
To rear right  
speaker  
(Orange)  
REAR.R  
4
Installation  
Before installing the receiver permanently, fit it in the approximate place in your car ,and connect the  
equipment according to the speakers and electrical connections. When  
your system is operated properly,(preferably with the  
car engine running), follow the instructions  
for permanent installation  
of your system.  
INSTALL THE UNIT  
1)Install half sleeve, can be with or  
without adapter. It will fit better  
with adapter.  
2)Bend over some tabs to secure  
the half sleeve inside of dash.  
3) Support strap to be strutted  
under dash, secure this strip to  
avoid skipping of disc.  
2)Bend over tabs  
of half sleeve  
(supplied)  
1) Adapter  
(not supplied)  
Half sleeve  
(supplied)  
REMOVE THE UNIT  
Insert removal wrench into the small  
gap on the right side of the unit and pull  
the unit slightly out on the same side,  
then release the wrench. Repeat the  
same action for the left side. By now,  
you can remove the unit and unplug  
the wires connector.  
3) Two wrenches for releasing  
the unit (supplied)  
5
General Features  
18  
17  
16  
19  
15  
Adjust angle  
Stop/Clock  
RPT/ST  
SRC  
RESET  
AUX IN  
14  
13  
L
EJECT  
BT  
V
MIC  
IR  
PWR  
MUTE  
BAND  
1
2
3
4
5
6
7
8
9
10 11 12  
6
General Features  
Remote Control  
18  
17  
16  
Loading and replacing the battery  
19  
15  
Stop/Clock  
RPT/ST  
Adjust angle  
SRC  
RESET  
AUX IN  
14  
13  
L
EJECT  
BT  
V
MIC  
IR  
PWR  
MUTE  
BAND  
Pull out  
1
2
3
4
5
6
7
8
9
10 11 12  
1
VOL/SRC/PWR Button: Rotate the VOL button to adjust the  
volume; press it to make confirmation./Play source switch.  
Notes of remote control using:  
2
3
5
6
7
8
9
MIC.  
4
1)Aim the remote controller at the remote sensor on the unit.  
2)Remove the battery from the remote control or insert a  
battery insulator if the battery has not been used for a  
month or longer.  
3)DO NOT store the remote control under direct sunlight  
or in high temperature environment, or it may not function  
properly.  
/
[
Signal received window.  
]/[ ]Button: Rewind, Last chapter/Forward,Next chapter.  
SD Slot.  
To eject the DISC.  
MUTE/[ ] Button: Mute/Answer.  
BAND Button: Band switch/Radio mode is random play.  
BT Button: Switch to BT function directly.  
110  
4)The battery can work for 6 months under normal condition.  
If the remote control can't work, please change the battery.  
5)Use(button shaped) lithium battery(CR-2025)only.  
6)DO NOT recharge, disassemble, heat or expose the battery  
in fire.  
11 EJECT Button: To eject the DISC.  
12 AUX IN  
13  
USB Port.  
14 Reset Button.  
15  
[
]Button: Display Open/Close.  
16 Adjust angle Button: Display position Adjustment.  
17 TFT-LCD screen.  
7)Insert the battery in proper direction according to the(+)  
and ( - ) poles.  
18 ST/RPT Button: Sound track switch/Repeat.  
19 CLOCK/STOP Button:Clock/Stop.  
8)Store the battery in a place where children cannot reach to  
avoid risk of accident.  
7
Remote Control  
Button and Function  
2 [BAND/RDM] Button: Band switch/Play randomly  
[APS/PRG] Button: Scan/Program  
[ST/RPT] Button: Stereo switch/Repeat  
PWR  
Mute  
SRC  
REC  
Sub-T  
1
2
3 [ ]Button: Play/Pause  
[
R/L  
N/P  
Band  
RDM  
]Button: Stop  
[Setup] Button: Menu setting  
[Title] Button: Title Menu  
Language  
Angle  
7
6
SEL  
APS  
PRG  
CLK  
EQ  
S T  
[ENTER] Button: Play/Confirm  
[ ][ ][ ][ ]Button: Up/down/left/right button  
RPT  
AF  
[
] Button: Ring on  
[OSD/ Id3] Button: Screen Display/ Select chapter  
] Button: Ring off  
4
3
Enter  
TA  
[
Setup  
Title  
PBC  
PTY  
[0~9]Button:0~9  
[GOTO] Button: GOTO search  
[RO/SN] Button: Radio scan  
5
6
7
2
3
1
ABC  
DEF  
4
5
4
5
6
OSD  
GHI  
JKL  
MNO  
[AF] Button: Search stations automatically  
[TA] Button: Traffic broadcast  
[PTY] Button: Program style  
I
D3  
7
8
9
PQRS  
WXYZ  
TUV  
0
RO/SN  
#
Goto  
[
[
]Button: Forward/Next chapter  
]Button: Rewind/Last chapter  
*
10+  
[+/-]Button: Increase/recluce volume  
[SEL] Button: System setting  
[CLK] Button: Clock display  
Note: This unit doesn't have RDS function, AF/TA/PTY neither.  
This unit doesn't have bluetooth function, [ ]/[ ] neither.  
If the unit hasn't some functions , some buttons won't be affected.  
[EQ] Button: Sound effect  
1
[PWR] Button: Power  
[N.P/ANGLE] Button: Video switch/Angel Adjustment  
[R.L/LANGUAGE] Button: Left/right sound track switch  
dialogue language.  
[REC/Sub-T]Button: Transfer recording/Language switch  
[MUTE] Button: Mute  
[SRC] Button: Play source switch  
8
Play operation  
Flex screen(  
)
Adjust angle  
Stop/Clock  
RPT/ST  
Open screen: Press [ ] to open.  
Close screen: Press [ ] to close.  
Note:  
If the screen stop when out press[ ] to hide the screen, then press  
[
] again the screen will out.  
When power off, the screen will hide.  
Eject  
EJECT:  
Press[ ] to eject the disc.  
Note: About 10 seconds after the disc ejected ,if not taken out, the  
disc will be absorbed in again.  
SRC  
RESET  
AUX IN  
Volume  
L
EJECT  
BT  
V
MIC  
IR  
Increasing Volume:  
Rotate the VOL button in counterclockwise direction.  
PWR  
MUTE  
BAND  
Decreasing Volume:  
Rotate the VOL button in anticlockwise direction.  
ON.OFF  
Stop/Clock  
Press [PWR] button shortly will turn the unit on. Hold [PWR]  
button down will turn off the unit.  
NOTE: When the power is on, the screen enters RADIO mode  
automatically; press [ESC] button to go back to the main menu;  
press [SRC] button shortly to switch to other modes.  
STOP:  
Press [STOP] button to stop when DVD playing.  
CLOCK:  
Press [CLOCK] to switch between radio frequency and  
clock, when radio playing.  
9
Play operation  
Display position Adjustment  
MUTE/  
MUTE: Short press this button to mute the sound, short press  
MUTE button again or press any other button to resume  
the normal listening.  
For smooth adjustment, make sure that you return the lateral  
angle to the neutral position and then adjust the tilt angle.  
Avoid physical shock on the display.  
Channel seek: In BT mode, when call comeing, press this  
button can answer.  
Tilt angle  
Stop/Clock  
RPT/ST  
Adjust angle  
Press [ADJ] button ,it can adjust the  
screen angle gradually.  
The unit has 4 grades  
Stop/Clock  
RPT/ST  
Adjust angle  
Stop/Clock  
RPT/ST  
Adjust angle  
for adjustment ,and each time you  
press the button ,it can move one  
grade down along indication; it can  
resume up along indication.  
CLOCK  
STOP  
ST  
ADJ  
RPT  
Adjust angle  
SRC  
RESET  
AUX IN  
L
V
MIC  
EJECT  
BT  
IR  
PWR  
MUTE  
BAND  
When you turn on the unit again, the angle  
will be the same as the last angle that  
you set.  
ADJ ANGLE  
Stop/Clock  
RPT/ST  
Adjust angle  
CAUTION  
Do not place any object on  
the display forcefully, or  
subject it to undue force.  
Do not move the display  
forcibly.  
The monitor's movable range  
may be limited by the type of  
car, a position where the  
display is mounted, etc.  
SRC  
RESET  
AUX IN  
L
EJECT  
BT  
V
MIC  
IR  
PWR  
MUTE  
BAND  
10  
Setup Operation  
MENU  
Video setup  
ENTER MENU: Press [MENU] button, then touch setting button, it  
Bright Color Contrast Tint  
will show in screen follows:  
Vmode  
Video mode:  
STAD  
USER  
SOFT  
VIDEO  
Menu operation  
BRIGHT  
COLOR  
14  
14  
BRIG  
CONTRAST 13  
TINT  
VMODE  
Touch [  
Touch [  
Touch [  
]/[  
]/[  
] to choose menu.  
]to adjust parameter.  
15  
STND  
] to back main menu.  
Audio setup  
Audio setup Bass Treble Balance Fader  
setup between 0~14.  
Audio mode:  
EQ setting  
AUDIO  
NORM  
FLAT  
POP  
BASS  
0
Menu operation  
TREBLE  
BALANCE  
FADER  
EQ  
-
07  
06  
06  
R
R
Touch [  
Touch [  
Touch [  
]/[  
]/[  
] to choose menu.  
]to adjust parameter.  
FLAT  
CLAS  
ROCK  
] to back main menu.  
System setup  
Loud ON and OFF  
Beep ON and OFF  
Time Adjust press [  
BASIC mode:  
BASIC  
] or[ ] button to select hour/  
Menu operation  
LOUD  
BEEP  
OFF  
ON  
minute then press [ ]or [ ]button to setup.  
CLOCK  
00:00  
Touch [  
Touch [  
Touch [  
]/[  
]/[  
] to choose menu.  
]to adjust parameter.  
] to back main menu.  
11  
Radio Operation  
Select station  
Adjust angle  
Stop/Clock  
RPT/ST  
Press [AS/PS] button  
Seek Tune:  
In radio playing mode, holding down the [AS/PS] icon will  
seek and store strong frequency stations automatically.  
Note: FM band can store 18 stations; AM band can store 12 stations.  
AF  
TA  
PTY  
Browse station  
Press [SCAN] button  
Press [SCAN] button to scan the existing station.  
SRC  
RESET  
AUX IN  
L
EJECT  
BT  
V
MIC  
IR  
PWR  
MUTE  
BAND  
Band Tune  
Manually Tune  
Note: If the unit doesn't have RDS function, the touch-screan  
won't show "AF, TA and PTY".  
Press[ ] button: adjust to higher frequency.(such as  
87.5,87.55...)  
Press[ ] button: adjust to lower frequency(such as  
105.5,105.0...)  
Band  
Press [BAND] button to transfer band.  
Automatically Tune  
Holding down the [ ] button: search higher frequency  
station, and will stop when meeting one.  
FM1  
FM2  
FM3  
Holding down the [ ] button: search lower frequency  
station, and will stop when meeting one.  
AM2  
AM1  
12  
Radio Operation  
AF(Alternative Frequency)  
Press AF and then press[ ],the machine will scan signal get  
the best frequency of the local radio station. If meet a stronger  
signal of the same program. letter TP will appear on LCD,  
and unit will automatically choose the stronger signal sought.  
Before auto scan the radio station, please turn off AF  
firstly.  
Only remote control (  
page8)  
TA(Traffic announcement)  
Press TA, the unit will prior to seek the traffic information. If the  
machine receives the traffic information, it will choose this  
signal and quit other radio signal or CD program. If press TA  
again, other program will recover and the traffic information  
program will quit.  
Only remote control (  
page8)  
PTY(Program type)  
Press PTY, the unit will begin to receive program as news,  
current affairs ,music, etc. The unit will seek the program  
automatically and will quit CD player if it gets the right program.  
If press PTY again, PTY function will quit and other program will  
play as before.  
Among AF, TA and PTY, TA has the absolute priority to be chosen.  
Only remote control (  
page8)  
Note: If the unit is without RDS function, please skip this page.  
13  
Sound Operation  
L/R  
L/R  
E
Play/pause  
In play mode, press [  
mode.  
] button to switch to play or pause  
Five direction button: In play mode, you can touch[ ][ ]icon to  
choose music, touch [E] to play music.  
Select chapter or section: In the DVD mode, press [ ] to  
TIT  
choose last chapter, press [ ]to choose next.  
Forward: Hold [ ] button down;  
Rewind: Hold [ ] button down.  
Title: In play mode, press [TIT] on the screen or remote control to  
back to the title menu, and re-select the items needed.  
RPT  
L/R  
RPT: In the play mode press[ RPT ]button then can transit among  
R/L: In VCD/CD/DVD mode, press [R/L]on the screen or remote  
control to switch among mono L mono R or stereo.  
the following status.  
REP ALL  
REP ONE  
REPEAT OFF  
14  
SD/USB Operation  
USB/SD play operation  
CLOCK  
STOP  
ST  
ADJ  
PLAY/PAUSE:  
Adjust angle  
RPT  
Press [  
Select:  
Under USB or SD play, press[  
] button to play or pause.  
SRC  
RESET  
AUX IN  
L
EJECT  
BT  
V
MIC  
IR  
PWR  
,
MUTE  
BAND  
,
]can select tracks.  
REPEAT  
Press [ST/RPT] button first to repeat the playing track  
RPT OFF  
RPT DIR  
RPT ONE  
RPT ALL  
BAND:  
Press [BAND] button to play the disc randomly.  
RDM OFF  
RDM ON  
USB/SD mode  
USB/SD mode  
Inset USB/SD,the play will to the USB/SD playing mode  
antomaticly.  
15  
Bluetooth  
The Bluetooth is wireless mode of transmission in short  
distance. Through Bluetooth function, the DVD unit establishes  
connection with Bluetooth handset. And then, these units can  
realize mutually controling and file transfering.  
Paring  
Phone set pairing step as follows:  
A: Turn on Bluetooth, then  
touch On/Off icon to turn  
on this function.  
NO.2  
Choose the Bluetooth Mode  
B: Turn on handset's Bluetooth  
function .  
Method :  
A: Press the [SOURCE] button, to  
return to main menu..  
C: When the mobile phone  
set finds the signal, input  
pairing number. Initial Pairing Code No. 0000  
B:Exhales the main menu, choose  
the Bluetooth to enter the  
Bluetooth mode.  
D: After pairing, TFT screen shows pairing succeed and  
quit the pairing.  
NO.1  
Working mode of Bluetooth  
Bluetooth has the following functions:  
A: Paring  
Make DVD Bluetooth function as handset's  
facility through pairing.  
NO.1  
-
-
B: Connecting  
After connecting with the handset,  
you can operate the mobile phone through DVD unit  
(such as H,F, call, call record etc.)  
NO.2  
16  
Bluetooth  
Mobile phone  
C: Touch Transfer icon can switch to phone answer mode.  
Touch it again can return to Bluetooth function of the unit.  
Remarks: Some mobilephone can't support this switch function.  
After connected, you can make phone call through, touch  
screen or phone record.  
A: Making mobile phone call  
After making phone call, the [ ]will shining.  
13590205862  
B: Making touch screen call  
Input the numbers on the screen, press [ ] icon can correct  
the numbers;  
Press [ ] icon to answer phone call;  
Press[ ] icon to cancel or hang up.  
13590205862  
Hang up  
You can press the [ ]button to hang up.  
13590205862  
Answering  
Answering functions as follows:  
A: After connected, the unit can use the telephone function.  
B: When there is a phone call, the Bluetooth will switch to  
phone function and show the calling number automatically.  
Note: If the unit does not have this function, pls skip it.  
Some models of mobile phones are not supported by the  
Bluetooth module of this unit.  
17  
TV Operation  
Without touch function, without these icons.  
CLOCK  
STOP  
ST  
ADJ  
Adjust angle  
RPT  
SRC  
RESET  
AUX IN  
L
EJECT  
BT  
V
MIC  
IR  
PWR  
MUTE  
BAND  
TV operation  
You need install TV antenna, when receive program.  
TV mode:  
Press [SRC] to enter main menu, then press TV icon on  
TFT screen to enter.  
Channel search:  
Press [APS] or press [AMS] to search and store TV station  
automatically.  
Direct Channel Selection:  
(Only for remote control)  
Note: If the unit does not have this function, pls skip this page.  
Enter a channel number by pressing [0]to[9].  
18  
Accessories  
External view  
External view  
........ Number of items  
........ Number of items  
1
3
............1  
............2  
2
............1  
The use of any accessories except of those provided might  
result in damage to the unit .Make sure only to use the  
accessories shipped with the unit ,as shown above.  
19  
Troubleshooting  
What appears to be trouble is not always serious. Please check the following points before calling a service center.  
Familiar characters and their meanings  
Characters  
Causes  
Remedies  
Clean the disc or change the disc.  
Insert the disc correctly.  
Insert a disc.  
Disc is too dirty.  
Disc is inserted upside down.  
No disc in the unit.  
NO Disc  
Disc is extreme dirty.  
Clean the disc or change the disc.  
Insert the disc correctly.  
Bad Disc  
Disc is inserted upside down.  
The disc is not compatible with  
the unit.  
Unkown Disc  
Clean the disc.  
Clean the disc.  
The disc's region code is not the  
same as the unit's.  
Region Error  
Disc transparence fault press disc Then change the angle and inject  
button long time exit.  
Disc inject dead  
again or change another disc.  
21  
Troubleshooting  
General problems  
Symptoms  
Causes  
Remedies  
Install a new fuse with correct rating.  
Install a new fuse with correct rating.  
Reset the unit.  
The fuse of the unit has been broken.  
The unit cannot be  
powered on.  
The fuse of car battery has been broken.  
False operations and etc.  
Battery has been exhausted.  
Change the battery.  
Remote controller does  
not work.  
Battery is not installed correctly.  
Install the battery correctly.  
Correct the connection according to(Electrical  
Connections Overall Diagram).  
Audio output connection is not correct.  
Adjust the volume to the optimum level.  
Check the speakers.  
The volume level is set to the minimum level.  
The speakers have been damagedl.  
No sound comes out or  
it's hard to hear.  
Adjust the balance of audio channel outputs. Please  
refer to (Audio control).  
The audio channel outputs are not balanced.  
The speaker cord is contacted with the  
bodywork.  
Use insulating cord for connection.  
Use original copy disc.  
Piratic disc is used.  
The speakers power rating does not fit into  
the unit output power.  
Change the speakers.  
Poor sound quality or  
sound distortion.  
Correct the connection according to(Electrical  
Connections Overall Diagram).  
The speakers are connected incorrectly.,  
The speaker cord is contacted with the  
bodywork.  
Use insulating cord for connection.  
User preset information is  
lost when ACC is off.  
Correct the connection according to(Electrical  
Connections Overall Diagram).  
ACC and BATT are connected incorrectly.  
22  
Troubleshooting  
TFT Monitor  
Symptoms  
Causes  
Remedies  
No image appears on the  
monitor and warning  
information is shown at  
all times.  
Correct the connection according to  
(Electrical Connections Overall Diagram).  
Incorrect connection of Breaking wire.  
The color system of DVD disc is not  
suited with the monitor.  
Adjust the color system of the DVD disc  
or the monitor.  
The actual color system is not the same  
as the marked color system on the label  
for some piratic discs.  
Use original copy disc.  
Abnormal display like  
as pulsatile stripes on  
the image and on.  
The video cord is broken.  
Change the video cord.  
The video cord is not connected correctly.  
Connect the video cord correctly.  
Turn off the power and then turn on the  
power again, or change to other playing  
source and then go back.  
Characters are  
abnormal.  
False operations.  
23  
Troubleshooting  
Radio Tuner  
Symptoms  
Causes  
Remedies  
Correct the connection according to  
(Electrical Connections Overall Diagram).  
Auto antenna is not extended completely.  
It's hard to receive  
stations.  
Correct the connection according to  
(Electrical Connections Overall Diagram).  
Auto antenna is not connected with the unit firmly.  
LOCAL function is on.  
Close the LOCAL function.  
Mp3 playback  
Symptoms  
Causes  
Remedies  
Change the disc.  
Disc is scratched.  
Disc is too dirty or wet.  
Clean the disc.  
Disc cannot be played  
back.  
Clean the pickup with cleaning disc.  
The pickup is dirty.  
Disc is inserted upside down.  
Insert the disc correctly.  
Change the disc.  
Disc is scratched.  
Disc is too dirty or wet.  
Clean the disc.  
Interruption occurred during  
playback.  
Change the disc.  
Some contents are damaged.  
Disc is not recorded correctly.  
Record the disc again.  
MP3's name cannot  
be displayed correctly.  
Use the regular characters.  
The name of Mp3 is not regular.  
24  
Troubleshooting  
DVD player  
Symptoms  
Causes  
There is a disc in the unit already.  
Disc is scratched.  
Remedies  
Disc cannot be inserted.  
Eject the disc then insert another one.  
Change the disc.  
Disc is too dirty or wet.  
Clean the disc.  
The pickup is dirty.  
Clean the pickup with cleaning disc.  
Change the disc.  
Disc is not compatible with the unit.  
Parental lock class is too high.  
Disc memory less than 120M.  
Disc is inserted up side down.  
Disc cannot be played back.  
Change the parental lock class.  
Choose the disc of memory more than 120M.  
Insert the disc correctly.  
The disc 's region code is not the same  
as the unit 's.  
Change the disc.  
Change another disc containing subtitle files.  
Subtitle cannot be shown.  
There is no subtitle file in the disc.  
There is only one audio language/subtitle  
in the disc.  
Change another disc containing multi-language  
audio or subtitle.  
Audio language/subtitle  
cannot be changed.  
There is just one view angle in the disc.  
Change another disc containing multi-angle.  
Select another segment to play back.  
View angle cannot be  
changed.  
Multi-angle view is not available for the  
segment playing back now.  
The unit is compatible with copy system; hence  
some discs contained the informationof copying  
prohibited cannot be played back.  
The disc is protected by the copyright.  
Image distortion.  
PBC is invalid when playing  
back VCD.  
The disc does not support PBC.  
Change another disc with PBC function.  
Close PBC function.  
Repeat playback or GOTO search  
is invalid when playing back VCD.  
PBC is on.  
25  
Specifications  
Specifications subject to change without notice.  
DISPLAY UNIT  
RECEVING FREQUENCY FIGURE  
FREQUENCY  
Liquid crystal panel.........................................7 inches wide  
Display weight ...........................................................1.7kg  
Number of pixels............................................33,6960 pixels  
Display method........................Transparent color filter format  
Drive method....................................TFT (thin film transistor)  
active matrix format  
Auto Tiny  
Stepping Stepping  
AREA  
BAND  
RANGE HZ  
87.5-108.0M  
522-1620K  
KHZ  
KHZ  
100  
FM  
AM  
50  
EUROPE  
9
9
87.5-107.9M  
530-1710K  
FM  
AM  
FM  
AM  
200  
10  
200  
10  
AMERICA  
Light source.....................................................internal light  
(built-in small fluorescent lamp)  
87.5-108.0M  
100  
10  
100  
10  
SOUTHA MERICA  
520-1620K  
87.5-108.0M  
65.0-74.0M  
522-1620K  
GENERAL  
50  
100  
30  
9
1
2
FM  
Operating power...................................12 Volts DC, negative  
ground  
RUSSIA  
30  
9
FM3  
AM  
%10THD output wiring........................Designed for using four  
speakers only front and rear  
channels cannot be combined  
in use with 2speakers.  
Load impedance.................................compatible 4 to 8 ohm  
speakers  
Fuses............................................................ .........10 amp  
Dimensions....................... 52.5cm(L)x26.0cm(W)x29.3cm(H)  
Weight........................................................................2.5Kg  
26  
1 Year Limited Manufacturer Warranty -  
XO Vision warrants to the original retail purchaser of this product that should this product have any defect,  
under normal conditions, such defect(s) will be repaired or replaced with new or reconditioned product  
(at the Company's option) without charge for parts and repair labor.  
If said product is out of stock, XO Vision has the option to replace it with a similar product or issue a refund at our discretion.  
This warranty only covers manufacturer defects and must be returned to company in original condition.  
Proof of Purchase is required. This Warranty does not cover the costs incurred for installation, removal, product damages  
(i.e. discs, tapes, etc.) or reinstallation of the product.  
This warranty is void if company deems the unit to have been damaged through modification, improper installation,  
negligence, misuse, or tampering with the Serial number and/or bar code of the unit. This warranty is a limited warranty  
for repair/replacement of product if it falls under the above conditions. XO Vision is never responsible for more than the  
purchase price of the product.  
XO Vision encourages customers to contact the retailer first and only then contact XO Vision for warranty support.  
Customer is responsible for shipping the product to us; we cover shipping back to the customer.  
If you are having trouble with your unit, please email us at: [email protected]  
In your email, please include the model number, date and place of purchase and the problem. Thank you for purchasing XO Vision.  
OWNER'S MANUAL  
Before installation and operating the unit please read  
this manual thoroughly and retain  
it for future reference  

Weil McLain STAR 34 User Manual
Weil McLain EGH 95 User Manual
Toshiba TEC MA 186 100 SERIES User Manual
Sony WM GX221 User Manual
Sony WM FX355 User Manual
Sony TR818 User Manual
Sony TC WE825S User Manual
Sony HANDYCAM PJ30 User Manual
Sony ATRAC AD CDX GT610U User Manual
Samsung AD68 00752S User Manual