Whistler BT2300 User Manual

OWNER’S MANUAL  
Whistler Bluetooth Headsets  
The Whistler Group Inc. - Corporate Offices  
3604 NW Frontage Road  
Bentonville, AR 72712  
Models:  
BT2200 (Class2/CH2)  
BT2300 (Class2/CH2)  
BT3200 (Class1/CH2)  
BT3300 (Class1/CH2)  
1-800-531-0004  
The Whistler Group Inc. - Customer Return Center  
551 North 13th Street  
Rogers, AR 72756  
P/N 303000 © 2009 The Whistler Group Inc.  
Introduction  
Introduction  
Dear Whistler Owner,  
All intellectual property rights and copyrights for the manual, hardware, and related  
software are protected by applicable law. This manual may not be copied, reprinted, or  
reproduced in any manner without the written permission of the Whistler Group.  
Thank you for purchasing a Bluetooth® Headset from the Whistler Group. If you have  
questions concerning the operation of this Whistler product please call:  
Note: Your warranty period begins at the time of purchase. The warranty is validated only  
by the dated store receipt. Record the serial number of the unit in the space provided in  
the warranty section of the manual.  
Customer Service  
1-800-531-0004  
Monday - Friday • 8:00 am - 5:00 pm CT  
or visit our website  
To fully acquaint yourself with the operation of your Whistler we recommend reading this  
Enjoy your Whistler and please drive safely.  
Sincerely,  
Please keep the receipt in a safe place. For warranty verification purposes, a copy of your  
dated store receipt must accompany any unit sent in for warranty work. If the unit is  
returned without a dated store receipt, an out of warranty service charge applies.  
The Whistler Group, Inc.  
You now have the possibility to connect devices like cell phone, PDA, GPS system  
(depending on the manufacturer), and 2-way radio systems wirelessly to your headset.  
Furthermore, you can talk wirelessly to your passenger with 2 BTS2200/2300 headsets or  
to another motorcycle operator with 2 BTS3200/3300 headsets.  
Please read the instructions for the different models carefully regarding the pairing with  
external devices and the intercom function. Design and specifications could be changed  
without prior notice.  
2
3
What is Bluetooth?  
Safety Instructions  
Bluetooth is a wireless protocol utilizing short-range communications technology facilitating  
data transmissions over short distances from fixed and/or mobile devices, creating wireless  
personal area networks (PANs).  
Please read the “Safety Rules” carefully before using this product. Following the safety rules  
prevents users from damages related with the misuse of the product. It is very important to  
follow these safety rules. We state “Caution” and “Warning” to clarify any potential risk for  
any damage associated with the misuse of the product.  
The intent behind the development of Bluetooth was the creation of a single digital  
wireless protocol, capable of connecting multiple devices and overcoming issues arising  
from synchronization of these devices. Bluetooth provides a way to connect and exchange  
information between devices such as mobile phones, telephones, laptops, personal  
computers, printers, GPS receivers, digital cameras, and video game consoles over a  
secure, globally unlicensed industrial, Scientific, and Medical (ISM) 2.4 GHz short-range  
radio frequency bandwidth.  
CAUTION  
WARNING  
May cause bodily harm or even  
death if the user ignores these  
warnings in the safety rules.  
May cause damage or shorten the life of  
the product if the user ignores these  
cautions in the safety rules.  
Attach the Bluetooth unit to the helmet and check its security before driving. — If the  
unit is not secure to the helmet, it could get damaged when falling and the user  
assumes responsibility.  
Important information concerning the Whistler Bluetooth Headsets.  
1). The paring between 2 headsets or headset and another device will be  
automatically interrupted if the reception distance is exceeded.  
Do not detach the unit forcibly during operation. — When detaching from the helmet, it  
has to be powered off and detached safely.  
2). Please make sure that the paired devices will be in close proximity.  
Do not pull on the power cord. — It may cause damage to the power cord.  
3). The Bluetooth function of other devices in the environment should be switched off  
so that they won’t interfere with the pairing process.  
Do not use a multi-socket for external adapter. — It may cause unexpected heating, fire,  
and malfunction.  
4). Please note that in some cases, the headsets cannot be paired with external  
devices because some manufacturers do not allow other Bluetooth devices than  
their own.  
Do not place the unit near a magnet. — It may cause malfunction.  
4
5
Safety Instructions  
Features - Components  
• Disconnect charger when complete.  
• When cleaning the exterior, switch off  
the unit and wipe it with a dry cloth  
only. — A wet cloth may cause and  
electronic shock.  
Main Unit  
Speakers  
Microphone  
Accessories  
• Do not use damaged cables, jack, or loose  
socket.  
• Do not place the product in an area which the  
temperature could suddenly increase.  
• Unplug the product when not using it  
for a long time.  
Microphone A  
Bracket B  
BT2300/3300  
Bracket A  
• Keep the power socket clean and free from  
dust.  
• Do not drop or throw the unit.  
Speakers A  
• Be careful with sharp surfaces when  
attaching bracket.  
• Do not clean the exterior with volatile or oily  
solvents.  
Microphone B  
• Do not overcharge the product.  
Remove when complete.  
Hook &  
Loop  
• Stop using the product in case of smoke or  
burning smell.  
3M Tape  
• Do not disassemble, repair, or modify,  
the unit.  
• Do not substitute non Whistler cables, jacks, or  
charger.  
• Do not rotate the BT2200/3200  
microphone by 360°.  
• Do not disassemble product.  
Speakers B  
Protection  
Tape  
• Keep away from children and pets.  
BT 2200/3200  
• Make sure that USB jack of the headset  
and charger are correctly connected to  
the USB socket on the module.  
Charger  
• Keep charger away from metals to avoid  
shorting the jack.  
• Please completely charge the headset  
prior to its first use.  
6
7
Match Unit to Helmet Type  
Storing and Recharging Headset  
Storing  
When the unit is not in use please consider the following steps.  
2) Flip-up Helment -  
W/microphone B  
1) Full Face Helment -  
W/microphone A  
1). When not using the headset, please store it in a dry place and switch it off to save  
battery power.  
BT2300/3300  
2). Do not place it in direct sunlight or extremely hot temperatures.  
3). Store all accessories in a dry place.  
Recharging Headset  
The Bluetooth headset has a Li-Polymer rechargeable battery. Before using the headset for  
the first time, the battery has to be charged completely.  
3) Open Face Helment  
1). Only charge the headset with the supplied charger. The headsets have a  
charge voltage of 5V. Please note that the use of different charger could  
damage the headset and void the warranty.  
BT2200/3200  
8
9
Storing and Recharging Headset  
Storing and Recharging Headset  
Battery Charge / Usage Time  
Recharging Headset - (continued)  
2). Connect the headset to the charger as described. Please make sure that the  
charger plug is inserted correctly into the headset.  
Usage Time  
Charge  
Time  
Model  
Stand-by  
Speaking/music/intercom  
BT2200/2300  
BT3200/3300  
~180h  
~90h  
~14h  
~7h  
~ 3h  
3). The red LED is illuminated during the charging process. When the headset is fully  
charged, the red LED turns off. Disconnect the charger unit from the headset after  
the charging process.  
The usage times may vary depending on the number of connected systems.  
The battery must be replaced by Whistler personnel.  
4). If the battery status is low, you will hear a warning signal in the headset.  
Check Battery Status  
Press both volume keys (+&-) for 10 seconds from power off status and then release. The  
red LED will indicate the battery status.  
Low Battery: The red LED will flash approximately 4 times (fast)  
Medium Battery: The red LED will flash approximately 2 times (slower)  
Full Battery: The red LED will flash one time (long flash).  
10  
11  
Installing Headset  
Installation of Speakers and Microphone  
Please note: Equipment will vary due to helmet type.  
Select mounting method based on helmet type.  
1) Using Bracket A (for attaching to helmet)incl. 3M adhesive tape.  
Recommened to be placed on the left hand side  
1). Please connect the headset cable (USB plug) with  
the USB socket on the module.  
2). Connect the microphone to the white plug on the  
head set cable (BT2300/3300 only).  
Double sided  
adhesive tape  
II. Please prepare the tape  
on the bracket and  
attach it to the helmet  
III. After attaching the  
bracket, the main  
module will be slipped  
on the bracket top-  
down.  
I. Please clean the  
helment surface before  
attaching the bracket.  
3). Apply the hook and Loop type to the inside of the  
helmet near your ears. Depending on the helmet  
type, the speakers can be placed on or under the  
inside helmet liner.  
2) Using Bracket B (for attaching to the helmet)  
4). Both speakers have different cable lengths. The  
shorter cable is for the module side.  
Please note: Not possible with every helmet type  
5). The microphone should be placed close to the  
mouth inside the helmet.  
I. Slip the Bluetooth  
module top-down to  
the bracket.  
II. The bracket should be attached vertically on the outer shell of  
the helment. If neccessary, please protect the helment with the  
protection tape against scratches.  
12  
13  
Button Callouts  
Button Functions  
Key  
[+] KEY  
Function  
ACTIVATE/DEACTIVATE CHANNEL 2  
INCREASE VOLUME  
ACTIVATE/DEACTIVATE CHANNEL 1  
DECREASE VOLUME  
[-] KEY  
PAIRING CHANNEL 2 AS MASTER  
REDIALING, ACCEPT CALL  
MASTER KEY [M]  
TALK KEY [T]  
RESET  
RESET OF ALL FUNCTIONS, ALL CHANNELS OFF  
TEMPORARY MUTING OF CHANNEL 1 & 2  
MUTE KEY  
The volume adjustment will be acknowledged as tones through the speakers.  
14  
15  
Basic Functions and Operation  
Pairing to a Cell Phone  
Normally, you can connect every Bluetooth cell phone to the headset. However,  
depending on the phone type, some functions cannot be operated through the headset.  
This includes the automatic music rendering after a call, redialing, or other functions.  
Therefore, if you have problems with your mobile phone, please consult the phones  
owners manual.  
Function  
Key/Action/LED  
Signal  
4 Tones  
Press the [-’] key for 4 seconds until the red LED flashes.  
Activate channel 1  
Press the [+] key for 3 seconds until the green LED flashes. If the  
headsets haven’t been paired before, the headset go into SLAVE  
mode and starts flashing rapidly.  
4 Tones  
Activate channel 2  
Stand-by  
-----------  
1 Flash per second  
Press the [-] key for 3 seconds until the red LED flashes longer then  
release.  
Automatic and manual call acceptance  
Deactivate channel 1  
4 Tones  
Press the [+] key for 3 seconds until the green LED flashes longer  
then release.  
1). The headsets offer you the possibility to choose between automatic and manual  
call acceptance. Factory settings will be “automatic” call acceptance.  
Deactivate channel 2  
Pairing  
4 Tones  
5 Tones  
Press the [+] key from power off status until the green LED starts flashing  
rapidly.  
2). To change to manual call acceptance, activate channel 1 and press the [T] key for  
5 seconds. If you want to change it to automatic again, press the [T] key again for  
5 seconds. You will also hear a sound signal in your headset.  
Connected  
Redialing  
4 Tones  
-----------  
3 flashes per second  
Briefly press/release the [T] key.  
Press [-] & [+] simultaneously from power off status for 6 seconds and release.  
low = 4 flashes  
3). If the automatic call acceptance in activated, you will hear the ringing of the  
phone in your headset which will be automatically activated after 2-3 rings. To  
hang up the phone, momentarily press the [T] key.  
Microphone sensitivity  
-----------  
middle = 2 flashes  
high = 1 long flash  
Accept call  
Manual: Press [T] key when hearing the call signal.  
Press mute key for 5 seconds  
4 Tones  
-----------  
4). If the manual call acceptance is activated, you will have to accept the call by  
pressing the [T] key during the call. To hang up the phone, you have to  
momentarily press the [T] key again.  
Stop/Play music  
Start/Stop intercom  
Low battery status  
Reset  
Press mute key momentarily  
1 Tone  
Interval sounds every 30 seconds  
-----------  
-----------  
17  
iPress [R] key when the headset is turned on;.All LEDs turn off.  
Pairing to a Cell Phone  
Pairing to a Cell Phone  
Connecting the headset with cell phone.  
Play music from mobile phone  
1). Activate the Bluetooth function of you phone and start searching for other phones  
in our environment. If necessary, make use of your mobile phone manual. Please  
make sure that all other Bluetooth devices in your environment as well as all  
channels of other headsets are switched off.  
The Bluetooth headsets have Bluetooth Version 2.0 and the A2DP protocol. With this  
protocol, you can hear music in stereo quality. To hear music in stereo quality from your  
cell phone depends on whether or not your cell phone has the A2DP protocol too.  
Otherwise, you will hear the music in mono quality only.  
2). After the search function of your cell hone has been activated, activate your  
Bluetooth headset by pressing the [-] key, from the power off status, for  
approximately 7 seconds until the red LED starts flashing rapidly.  
1). Connect your cell phone with music to you Bluetooth headset as previously  
described.  
2). Activate the music on your cell phone. The volume can be adjusted with the [+] &  
[-] keys. With the Whistler BT2000/3000 models, you can adjust the music volume  
separately from the intercom volume.  
3). On most cell phones displays, you will see the name of the headset now (Whistler  
200/300). After you choose the headset, you will be asked for a password. This  
will be 0000 in most cases. Alternatively, try 1234 or 1111. If these passwords do  
not work, please consult your cell phone manual.  
3). To stop and start the music, press the Mute key on the headset.  
4). After entering the password, connect the cell phone to the headset by following  
the directions provided by your cell phone or cell phone owners manual.  
4). If cell phone and headset have too much distance between each other, but get  
together within 30 minutes, they will connect again automatically. After 30  
minutes have passed, you have to switch off/on your headset can cell phone to  
connect them again. If this does not work, please pair both units again.  
5). Cell phone and headset are now paired. If you reactivate both units, the  
connection will be automatically activated again (paired).  
18  
19  
Pairing to a Cell Phone  
Pairing to an Audio Device  
Receiving a call while listening to music  
Connection headset with audio device  
1). While listening to music from your cell phone, you can receive calls at any time.  
In addition to your cell phone, you can also connect a Bluetooth audio device on channel  
1 at the same time (e.g. GPS system, MP3 player, BTA (Bluetooth Adapter). Before starting  
the pairing, please switch off all other Bluetooth devices in your environment.  
2). If you receive a call, the music will be muted and you will hear the ringing of the  
cell phone. Depending on your selection, the call will be accepted automatically  
or manually.  
1). Activate channel 1 as described with the [-] key.  
3). After finishing the call, the music will be automatically activated again. Please refer  
to the information on page 16.  
2). Activate the audio device and start the pairing process. Please make use of the  
audio device users manual if necessary.  
4). If you press the [T] key while listening to music, the phone will redial the last called  
number. With some phones, you have to press the [T] key twice because the  
phone selects the caller list first.  
3). Please choose your headset so that you can connect both devices.  
4). You can now use your cell phone and the audio device at the same time on  
channel 1 or only the audio device. GPS systems often offer the possibility to  
connect the phone directly with the GPS system.  
Disconnect cell phone and Bluetooth headset  
1). Switch off the Bluetooth of your cell phone and disconnect the headset.  
2). Switch off channel 1 as described on page 15.  
If you use audio devices or GPS systems without  
Bluetooth, you can use a BTA (Bluetooth Adapter)  
to connect to the audio output of the device and  
transfer the sound via Bluetooth to your headset.  
NOTE:  
3). If you now activate both devices at the same time, the Bluetooth headset is still  
existing in the phone and just has to be connected again (Last Device Search).  
20  
21  
Pairing to an Audio Device  
Intercom Function  
Operating and disconnecting the audio device  
Headset Distance  
1). You can adjust the volume of the audio device with the [+] & [-] keys of the  
headset.  
The BT2200/2300 is intended for communications between the driver and passenger. You  
will need one headset for each person. The BT3200/330 is intended for communications  
between the driver of one motorcycle to the driver of another. You will need one headset  
for each person.  
2). You can start and stop the music with the Mute key.  
3). If the audio device is out of range from the headset, the connection will be  
interrupted.  
Vox Function  
1). The headsets are equipped with VOX function. Channel 2 will be muted if there is  
no active communication between headsets. Thus, no noise will be transferred  
between headsets during this time and all connected audio devices will be active.  
4). If the audio device and headset are out of range of each other but come within  
range within 30 minutes, they will connect again automatically. After 30 minutes  
have passed while out of range, you will have to switch your headset and the  
audio device off then on to connect them again. If this does not work, please pair  
both units again.  
2). The VOX function mutes automatically after 30 seconds if the headset does not  
detect any communication signals, perhaps because the signals are too low. 5  
seconds before the intercom mutes, the headset paired as Master will get a signal.  
The Slave headset will provide a sound when deactivation of the VOX occurs.  
5). To disconnect both devices, switch off channel 1 of the headset and the audio  
device. If the headset has not been paired to any other device, they will connect  
automatically after switching on.  
3). To keep the VOX on after the signal (sound), the Master [voice] has to speak  
louder. It may be necessary to adjust the sensitivity of the microphone (page 24)  
to ensure continuous communications. After the VOX has turned off, it can be  
activated again by speaking with a loud voice into the microphone.  
The volume adjustment and other functions  
NOTE:  
may differ with some GPS systems.  
22  
23  
Intercom Function  
Intercom Function  
Vox Function (continued)  
Pairing of headsets on channel 2  
4). When activating the VOX after is has turned off, a delay of 3 seconds is required  
before resuming conversation. The activation of the VOX will provide a sound in  
the headset.  
Before you start to pair the headsets on channel 2, please switch off channel 1 as well as  
all other Bluetooth devices in your environment.  
5). Depending on the helmet type and motorcycle, ambient noises could activate the  
VOX at higher speeds (~60 MPH). In that case, please protect the microphone as  
much as possible from ambient noises and lower the microphone sensitivity. If you  
ride for long hours at high speeds, we recommend that you switch off channel 2  
at one headset. If the channel is switched on again, the headsets are paired and  
the communications can resume.  
1). Headset 1: Press the [+] key for 7 seconds (from a power off status) until the  
green LED starts flashing rapidly. This headset will be the SLAVE.  
Headset 2: Press the [M] key and the [+] simultaneously for 7 seconds until the  
green LED starts flashing rapidly. This headset will be the MASTER.  
2). As soon as the headsets have paired, the green LEDs will flash slower.  
Adjustment of microphone sensitivity  
3). As long as the headsets have not been reset, they will connect automatically with  
each other every time you turn them off then on again.  
If the VOX does not function appropriately, the microphone sensitivity should be adjusted.  
The individual adjustment depends on the helmet, riding conditions, and the voice level.  
1). Press [+] & [-] keys simultaneously for 6 seconds (from a power off status). Release  
the keys.  
2) Adjustments  
Low: 4x flashing within 2 seconds  
Middle: 2x flashing within 2 seconds  
High: 1 long flash for 2 seconds  
Repeat key presses until adjustment level desired.  
24  
25  
Intercom Function  
Intercom Function  
Cell phone and intercom  
Music and Intercom  
1). Please connect the phone to the headset on channel 1 as described.  
2). Switch off channel 1 again and activate channel 2 as described.  
3). Switch on both channels again.  
1). Connect the audio device (MP3 player, iPOD, etc.) with channel 1 of the headset  
as described.  
2). If the headsets have not been paired, switch off channel 1 and active the intercom  
on channel 2 as described (See pairing on channel 2).  
4). You can now listen to music and make calls with your phone and use the  
intercom on channel 2. Press the [+] & [-] keys to adjust the music volume.  
3). Please switch on both channels again.  
4). You can now listen to music on channel 1 and communicate on channel 2. Press  
the [-] or [+] key to adjust the volume level of the mute [M] key to stop or start the  
music.  
5). The cell phone has first priority on channel 1. The intercom will be muted when a  
call comes in. The music will also be muted during intercom use. If the VOX is  
off, the music comes back on automatically (not possible will all cell phones).  
5). The music on channel 1 will be muted when the VOX is activated. As soon as the  
VOX is muted, the music will be automatically active again.  
6). Every headset can have two devices at the same time on channel 1 and also  
intercom on channel 2. Phone calls, music, and GPS announcements can only be  
received on the headset that they are actively paired with.  
During intercom on channel 2, you can have music and telephone on  
separate devices on channel 1. The music is active as long as the VOX is  
muted. When a call comes in, music and intercom will be muted as the  
phone has first priority. During the call, the intercom cannot be activated.  
Music and intercom volume will be adjusted separately from each other.  
After the call has been finished, it will take approximately  
5 seconds before the intercom is active again.  
NOTE:  
NOTE:  
26  
27  
Intercom Function  
General Information  
Disconnect headset from music / cell phone  
1). Switch off the headset on channel 1 as described.  
2). Switch off your cell phone / MP3 player.  
Static Noise  
In some cases, there could appear static noise for a short time but this does not influence  
the general quality of the Bluetooth headset.  
Some causes:  
3). As soon as you switch on the headset and the last connected device, the devices  
will automatically connected (last device search). With some cell phones, you  
have to confirm the connection again on the phone menu.  
1). Headset not paired with proper device.  
2). Headset and device out of Bluetooth range.  
3). Strong radio interference in the environment.  
4). Too many Bluetooth devices in the environment.  
28  
29  
Specifications  
Troubleshooting  
Your Whistler headset is expertly engineered and designed to exacting quality standards to  
provide you with reliable, trouble-free operation. If your unit has been correctly installed  
following the guidelines in this manual, but is not operating optimally, please refer to the  
troubleshooting guide below.  
Technical Data  
Bluetooth version  
Frequency  
BT2200/2300  
Version 2.0  
2.4 GHz ISM Band (2.4 – 2.4835 GHz)  
BT3200/3300  
Problem: Bluetooth Headset cannot be switched on  
Please check the battery status (page 10) and charge the headset if necessary. Please  
make sure the headset is charged completely before first time use.  
Output  
0 dBm  
+17 dBm  
Bluetooth Class  
Channel/Devices  
Operating Temperature  
Dimensions  
Class 2: 10m  
Class 1: 100m  
Problem: After the headset has been switch off and on again, it does not  
connect automatically to the last paired device.  
Please make sure that the Bluetooth on the other device is activated. Switch all devices off  
and on again and put them in pairing mode. If the problem still exists, reset the headset  
and pair the headset and device again.  
2/3  
-20 ~ 50 degrees C  
84(W) x 44.5(H) x 20.5(D) mm  
50g  
Weights  
Problem: The headset is on, but you cannot hear any sound through the  
speakers.  
Please check the volume level and increase if necessary. Please check if the speakers are  
OK and that the USB connector and jack are fully engaged. Also, please check the position  
of the speakers in the helmet.  
Specifications subject to change without notice.  
30  
31  
Troubleshooting  
FCC Information  
FCC ID: U6CCAMOS-BTS200  
FCC ID: U6CCAMOS-BTS300  
Problem: The voice over the microphone is too low.  
Please make sure that the boom microphone is correctly placed close to your mouth. The  
white marking has to be in the direction of your mouth (BT2200/3200). In addition, the  
microphone sensitivity can be adjusted as required (page 24).  
This device complies with part 15 of the FCC rules. Operation is subject to the following  
two conditions: (1)This device may not cause harmful interference, and (2)This device must  
accept any interference received, including interference that may caused undesired  
operation.  
Make sure this white marking is in the  
direction of your mouth.  
Note: This equipment has been tested and found to comply with the limits for a Class B  
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide  
reasonable protection against harmful interference in a residential installation. This  
equipment generates uses and can radiate radio frequency energy and, if not installed and  
used in accordance with the instructions, may cause harmful interference to radio  
communications. However, there is no guarantee that interference will not occur in a  
particular installation.  
Problem: The call cannot be accepted during music and intercom usage.  
Make sure that the automatic call acceptance is activated. If it is set to manual call  
acceptance, you will have to press the [T] button to accept the call.  
32  
33  
FCC Information  
Warranty Information  
If this equipment does cause harmful interference to radio or television reception, which  
can be determined by turning the equipment off and on, the user is encouraged to try to  
correct the interference by one or more of the following measures:  
-- Reorient or relocate the receiving antenna.  
Consumer Warranty  
This Whistler product is warranted to the original purchaser for a period of one year from the date  
of original purchase against all defects in materials and workmanship.  
-- Increase the separation between the equipment and receiver.  
-- Connect the equipment into an outlet on a circuit different from that to which the  
receiver is connected.  
This limited warranty is void if the unit is abused, modified, installed improperly, if the  
housing has been removed, or if the serial number is missing.  
-- Consult the dealer or an experienced radio/TV technician for help.  
There are no express warranties covering this product other than those set forth in this warranty. All  
express or implied warranties for this product are limited to one year. Whistler is not liable for  
damages arising from the use, misuse, or operation of this product.  
FCC Warning  
This equipment may generate or use radio frequency energy. Changes or modifications to  
this equipment not expressly approved by they manufacturer could void the users authority  
to operate the equipment.  
Service Out of Warranty  
Units will be repaired at “out of warranty” service rates when:  
• The units original warranty has expired.  
The manufacturer hereby declares that this Bluetooth Headset is in compliance with  
the essential requirements and other relevant provisions of Directive 1999/5/EC.  
• A dated store receipt is not supplied.  
• The unit has been returned without its serial number.  
• The unit has been abused, modified, installed improperly, or had its housing removed.  
Service Under Warranty  
During the warranty period, defective units will be repaired without charge to the purchaser when  
returned with a dated store receipt to the address below. Units returned without dated store receipt  
will be handled as described in section Service Out Of Warranty.”  
34  
35  
Warranty Information  
Warranty Information  
Service Under Warranty (continued)  
Service Under Warranty (continued)  
Due to the specialized equipment necessary for testing this product, there are no authorized service  
stations for Whistler products other than Whistler.  
3. Be certain your unit is returned with its serial number. For reference, please write your  
unit serial number in the following space: _____________.  
When returning a unit for service under warranty, please follow these instructions:  
Units without serial numbers are not covered under warranty.  
1. Ship the unit in the original carton or in a suitable sturdy equivalent, fully insured, with  
return receipt requested to:  
IMPORTANT: To validate that your unit is within the warranty period, make sure you keep  
a copy of your dated store receipt. You may have registered your unit at  
store receipt must accompany any unit sent in for warranty work.  
Whistler Repair Dept.  
551 N. 13th St.  
Rogers, AR. 72756  
Please allow 3 weeks turn around time.  
Service Out of Warranty (Continued)  
IMPORTANT: Whistler will not assume responsibility for loss or damage incurred in shipping. Therefore,  
please ship your unit insured with return receipt requested. CODs will not be accepted!  
The minimum out of warranty service fee for your Whistler product is $75.00 (U.S.). If you  
require out of warranty service, please return your unit as outlined in the section “Service  
Under Warranty” along with a certified check or money order for $75.00. Payment may also  
be made by MasterCard, VISA or American Express; personal checks are not accepted.  
2. nI clude with your unit the following information, clearly printed:  
• Your name and street address (for shipping via UPS), a daytime telephone number and  
an e-mail address, if applicable.  
• A detailed description of the problem (e.g., “Unit doesn’t have any audio”).  
• A copy of your dated store receipt or bill of sale.  
In the event repairs cannot be covered by the minimum $75.00 service fee, you will be  
contacted by a Whistler technical service specialist who will outline options available to you. If you  
elect not to have your unit repaired, it will be returned to you along with your certified check  
or money order.  
36  
37  
Warranty Information  
IMPORTANT: When returning your unit for service, be certain to include a daytime telephone  
number, and an email address (if applicable).  
Customer Service  
If you have questions concerning the operation of your Whistler detector, or require service  
during or after the warranty period, please call Customer Service at:  
1-800-531-0004.  
Representatives are available to answer your questions  
Monday - Friday from 8:00 a.m. to 5:00 p.m. (CT).  
www.whistlergroup.com  
Bluetooth is a registered trade mark of Bluetooth SIG Inc.  
38  
39  

Vulcan Hart GT User Manual
Sylvania Beverage Dispenser SE80092 User Manual
Sony XC ST30 User Manual
Sony WM PSY02 User Manual
Sony VCT 550RM User Manual
Sony TRV93 User Manual
Sony SAL50F14 User Manual
Sony Ericsson SAL552002 User Manual
Sony EL S25 User Manual
Samsung SMX K40SN User Manual