Vizualogic A 1150 User Manual

1493 Bentley Drive • Corona, CA 92879 • 951-272-1996 • 800-624-7960 • Fax 951-272-1584  
99-9138-000 Rev. 1 7/06  
9. INFRARED TRANSMITTERS – Transmits audio information from the  
A-1250 Monitor Layout  
source displayed on-screen to the wireless headphones.  
10. AUXILIARY INPUT JACK – Allows an external A/V source to be connected  
and viewed. The external source can only be viewed on the monitor that it is  
physically connected to.  
1
2
3
4
5
6
7
11. HEADPHONE JACK – Allows the use of wired headphones (not included)  
to be connectedAto-th1e1m5on0itor.Monitor Layout  
AUX  
8
9
10  
11  
1
1. IR Sensor – Allows the remote to navigate the OSD (On Screen Display) on  
MENU  
SOURCE  
POWER  
2
this unit and to control other functions and accessories.  
3
4
5
6
7
2. Light Sensor – Detects ambient light levels and dims the screen accordingly.  
3. MONITOR / DVD CONTROL BUTTON #1 - When set to Monitor Control  
mode, operates as the UP button. When set to DVD Control mode,  
operates as the PLAY button.  
4. MONITOR / DVD CONTROL BUTTON #2 – When set to Monitor Control  
mode, operates as the DOWN button. When set to DVD Control mode,  
operates as the PAUSE button.  
5. MONITOR / DVD CONTROL BUTTON #3 – When set to Monitor Control  
mode, operates as the MENU button. When set to DVD Control mode,  
operates as the STOP button  
6. MONITOR / DVD CONTROL BUTTON #4 – When set to Monitor Control  
mode, operates as the SOURCE button. When set to DVD Control mode,  
operates as the PREVIOUS button.  
1. IR Sensor – Allows the remote to navigate the OSD (On Screen Display) on  
this unit and to control other functions and accessories.  
2. Power LED – Illuminates in green when the headrest monitor is turned on.  
3. Power – Press to turn the headrest monitor on or off.  
4. Source – Changes the source displayed on the monitor. Each press of the  
SOURCE button advances the source in the following sequence:  
7. MONITOR / DVD CONTROL BUTTON #5 – When set to Monitor Control  
mode, operates as the ZOOM button. When set to DVD Control mode,  
operates as the NEXT button.  
Dual DVD system: DRIVER DVD 4 PASSENGER DVD 4 EXT AUX  
Single DVD system: DRIVER DVD 4 EXT AUX  
5. Menu – Accesses monitor picture adjustment settings. Each press of the  
8. POWER / TOGGLE – Press momentarily to toggle between on-screen DVD  
MENU button advances through the functions as follows:  
and Monitor Control functions. Press and hold to turn the monitor off.  
4
5
CONTRAST 4 BRIGHTNESS 4 COLOR 4 TINT 4 SHARPNESS 4  
DIMMER 4 RESET DEFAULT  
Once the desired selection has been made, use the 5 or 6 buttons to change  
the function setting.  
A-1250 Monitor On-Screen Functions  
SOFT BUTTON CONTROLS  
When any of the DVD / Monitor Control buttons are pressed, a row of icons will  
appear directly above the buttons. To alternate between DVD and Monitor  
Control functions, momentarily press the POWER / TOGGLE button. To perform  
a desired function, press the button directly underneath the desired icon.  
6. 5(UP) – Increases volume output of wired headphone jack. When in MENU  
mode also increases the value of the desired function.  
7. 6(DOWN) – Decreases volume output of wired headphone jack. When in  
MENU mode also decreases the value of the desired function.  
MONITOR CONTROLS  
Loading a Disc  
To open/reveal the DVD loading  
slot, PRESS on the top-center of  
the monitor frame (indicated by  
the Vizualogic logo).  
5 (UP) – Increases volume output of wired headphone jack. When in MENU  
mode also increases the value of the desired function.  
NOTE: Do not put pressure  
directly on the screen. Latch  
the monitor in the fully closed  
position when DVD loading slot  
is not in use.  
6 (DOWN) – Decreases volume output of wired headphone jack. When in  
MENU mode also decreases the value of the desired function.  
MENU – Accesses monitor picture adjustment settings. Each press of the MENU  
button advances through the functions as follows:  
CONTRAST 4 BRIGHTNESS 4 COLOR 4 TINT 4 SHARPNESS 4  
DIMMER 4 RESET DEFAULT  
1. EJECT – Press this  
Once the desired selection has been made, use the 5 or 6 buttons to change  
the function setting.  
button to eject the disc.  
1
SOURCE – Changes the source displayed on the monitor. Each press of the  
SOURCE button changes the source in the following sequence:  
2. Disc Slot  
2
3. LCD Panel  
3
Dual DVD system:  
DRIVER DVD 4 PASSENGER DVD 4 EXT AUX 4 AUX  
To load a disc, insert the the disc  
vertically with the label surface  
facing the rear of the vehicle.  
Gently lower the disc into the disc  
slot, until the loader motor accepts  
the disc and lowers it into the DVD player. Once the disc has been loaded,  
press on the monitor frame to conceal the DVD loading slot.  
6
Single DVD system:  
DRIVER DVD 4 EXT AUX 4 AUX  
ZOOM – Changes the size of the image displayed on-screen from wide, normal,  
or zoom  
7
Connecting External Devices  
DVD CONTROLS  
USING THE AUXILIARY INPUT JACK (A-1250 ONLY)  
Each A-1250 monitor has a 3.5mm auxiliary input jack labeled AUX located  
on the bottom left of the screen. To connect an external source (video  
game system, camcorder, etc.) to the monitor, use the available 3.5mm to  
RCA auxiliary input adapter cable (to connect an iPod® use the available  
Vizualogic Video Input cable). Using either the remote or the monitor-con-  
trol buttons, press the SOURCE button until AUX has been selected. The  
auxiliary device can now be viewed.  
4 (Play) – Plays a disc that is loaded into the integrated DVD player.  
< (Stop) – Stops playing a disc that is loaded into the integrated DVD player.  
; (Pause) – Pauses a disc that is loaded into the integrated DVD player.  
9 (Previous) – Accesses the previous chapter or track.  
NOTE: Any source connected via the screen-mounted AUX jack can only  
be viewed on the screen that the auxiliary source is physically connected  
to.  
: (Next) – Accesses the next chapter or track.  
USING THE WIRED HEADPHONE JACK (A-1250 ONLY)  
Adjusting the Picture Settings  
The A-1250 and A-1150 features multiple picture adjustment settings that allow the  
user to tailor the picture to their preferences. To access the picture adjustment set-  
tings, press the MENU button. Each press of the MENU button will advance through  
the settings shown below. Once the desired selection has been made, use the 5 or  
6buttons to change the setting level.  
Each A-1250 monitor has a 3.5mm wired headphone jack labeled  
.
To use, simply connect a pair of wired headphones (not included) to the  
wired headphone jack and use the 5or 6monitor control buttons to  
adjust the headphone volume output.  
NOTE: Using the monitor control buttons to change the wired headphone  
volume output will not affect the volume output of the wireless IR  
headphones.  
CONTRAST - Adjust to increase or decrease picture contrast.  
BRIGHTNESS - Adjust to brighten or darken the picture.  
COLOR - Adjust to increase or decrease the color intensity.  
TINT - Adjust to increase or decrease the color hue.  
SHARPNESS - Adjust to sharpen or soften the picture.  
DIMMER - Adjust to brighten or darken the monitor backlight. Select from:  
DIMMER HI (100% backlight), DIMMER MED (85% backlight) and  
DIMMER LOW (65% backlight)  
USING THE A/V CONTROL MODULE AUXILIARY INPUT  
The A-1250 and A-1150 system features auxiliary component RCA input  
jacks on the A/V Control Module. Devices connected to this input can be  
viewed on either screen (independently or simultaneously), as well as out-  
put through the vehicle stereo via the integrated FM Transmitter. To view  
this input press the SOURCE button until EXT. AUX is displayed.  
RESET DEFAULT - Resets the above picture settings to the default values.  
NOTE: Consult your installer to determine how to access this input.  
8
9
Remote Control Operations  
NOTE: The remote control will control all Monitor and integrated DVD functions.  
The remote is not a fully universal remote control and is only guaranteed to  
work with Vizualogic products.  
DVD FUNCTIONS  
9. UP – Moves up within the  
DVD SETUP menu.  
SOURCE  
ZOOM  
SOURCE  
MONITOR FUNCTIONS  
2
1
3
7
8
4
FM  
MONITOR  
10. DOWN – Moves down  
within the DVD SETUP  
menu.  
SOURCE  
ZOOM  
SOURCE  
1. MONITOR POWER – Press  
this button to turn the monitor  
ON. The current video source  
will be displayed on-screen, and  
within a few seconds the picture  
will appear. Press the button  
again to turn the monitor OFF.  
FREQ  
PICTURE  
15  
16  
17  
9
FM  
MONITOR  
RETURN  
FREQ  
PICTURE  
5
6
SETUP  
MENU  
14  
RETURN  
SETUP  
MENU  
ENTER  
FR  
TITLE  
STOP  
12  
13  
10  
11. RIGHT – Moves right within  
PLAY  
PREV  
PAUSE  
FF  
the DVD SETUP menu.  
ENTER  
FR  
TITLE  
STOP  
11  
PLAY  
PREV  
PAUSE  
FF  
NEXT  
SLOW  
REPEAT  
12. LEFT – Moves left within the  
2. SOURCE SELECT – All video  
sources connected to the AV  
inputs can be viewed on the  
monitor by pressing this  
NEXT  
SLOW  
REPEAT  
DVD SETUP menu.  
1
4
7
2
5
3
6
13. ENTER – Confirms a  
1
4
7
2
5
3
6
selection.  
button. Each time the button is  
pressed, the AV source will  
change in the following  
sequence: DRIVER DVD,  
PASSENGER DVD (if equipped)  
EXT AUX, AUX.  
DISP.  
8
9
GO  
14. RETURN – Return to  
previous menu screen or  
playing point.  
DISP.  
SUB  
8
9
GO  
A-B  
0
TITLE  
MUTE  
SUB  
A-B  
0
AUDIO  
ZOOM  
PBC  
TITLE  
MUTE  
15. SETUP – Navigates SETUP  
MENU. There are 4 pages to  
configure System  
AUDIO  
ZOOM  
PBC  
3. UP – Shifts right or up OSD  
menu. Increases the value of  
CONTRAST, BRIGHTNESS,  
(1) General Setup  
(2) Audio Setup  
(3) Video Setup  
COLOR, TINT, SHARPNESS or DIMMER.  
4. DOWN Shifts left or down OSD menu. Decreases the value of  
CONTRAST, BRIGHTNESS, COLOR, TINT, SHARPNESS, or DIMMER.  
5. PICTURE Press this button to adjust the value of CONTRAST,  
(4) Password Setup.  
BRIGHTNESS, COLOR, TINT, SHARPNESS, or DIMMER.  
6. ZOOM – Selects the screen among wide/normal/zoom.  
16. MENU – Goes to the Root Menu on the disc.  
7. FM SOURCE SELECT – While aiming the remote at the Driver Side Monitor,  
press this button to turn on the Frequency Modulator. Press this button  
repeatedly to change the Frequency Modulator’s audio source between  
DRIVER DVD, PASSENGER DVD, EXT AUX, and FM OFF.  
17. TITLE – Navigates the Title Menu on the disc.  
8. FREQUENCY SELECT – While aiming the remote at the Driver Side Monitor,  
press this button to select the desired Frequency Modulator channel.  
10  
11  
Remote Control Operations  
18. PLAY – Press this button to play a disc that is loaded into the integrated  
(continued)  
27. DISPLAY – Shows information on the top of the screen including title,  
chapter/track, time elapsed, and time remaining, or turns off the display.  
28. SUBTITLE – Changes the subtitle language to other available languages or  
DVD player.  
turns the subtitles off  
19. PAUSE – Press this button to  
(only applicable if the  
disc contains multiple  
subtitle languages).  
SOURCE  
ZOOM  
SOURCE  
SOURCE  
ZOOM  
SOURCE  
pause a disc that is loaded into  
the integrated DVD player. For  
more information, consult the  
DVD Basics section.  
FM  
MONITOR  
FM  
MONITOR  
FREQ  
PICTURE  
FREQ  
PICTURE  
RETURN  
RETURN  
29. GOTO – Navigates the  
Go To Menu and allows  
the selection of the  
SETUP  
MENU  
SETUP  
MENU  
ENTER  
FR  
TITLE  
STOP  
ENTER  
FR  
TITLE  
STOP  
19  
20  
20. STOP – Press this button to stop  
PLAY  
PREV  
PAUSE  
FF  
PLAY  
PREV  
PAUSE  
FF  
18  
21  
playing the movie or song.  
desired title, chapter,  
track or song on the disc.  
NEXT  
SLOW  
REPEAT  
NEXT  
SLOW  
REPEAT  
22  
24  
25  
STOP4PLAY: Resumes play from  
30. A-B (Except MP3) –  
Repeats disc from user  
selected point A to  
point B.  
where disc was stopped.  
23  
3
6
1
4
7
2
5
1
4
7
2
5
3
6
35  
STOP4STOP4PLAY: Restarts  
play from the beginning of the  
disc.  
26  
29  
30  
27  
28  
34  
DISP.  
8
9
GO  
DISP.  
8
9
GO  
31. PBC (Video CD only)  
Turns the PBC (Play Back  
Control) on or off  
SUB  
SUB  
A-B  
0
A-B  
0
TITLE  
TITLE  
21. PREV – Plays the previous  
MUTE  
MUTE  
31  
32  
AUDIO  
ZOOM  
PBC  
AUDIO  
ZOOM  
PBC  
chapter or track.  
33  
32. ZOOM – Enlarges the  
picture in the movie by  
2x, 3x or 4x. Shrinks the  
22. NEXT – Plays the next chapter  
or track.  
23. FR (Fast Rewind) – Press this button to search disc backward continuous-  
picture in the movie by 1/2x, 1/3x, or 1/4x.  
ly. There are 5 speed options to choose from: 2X, 4X, 8X, 16X, and 32X.  
33. AUDIO – Changes the audio track to another available language (only  
24. FF (Fast Forward) – Press this button to search disc forward continuously.  
applicable if the disc contains multiple audio tracks).  
There are 5 speed options to choose from: 2X, 4X, 8X, 16X, and 32X  
34. MUTE – Press this button to mute the audio to the wireless headphones.  
The screen will display ‘MUTE’ in the lower left corner when using this  
feature. Press the button again to restore audio to the previously set level.  
25. SLOW – Press this button to slow playback. There are 4 speed options to  
choose from: 1/2, 1/4, 1/8, 1/16.  
35. NUMBERS 0 to 9 – Use these these buttons to access a specific chapter  
26. REPEAT – (Except VCD with PBC on) Repeats all or a part of a chapter,  
or track.  
title, track, or an entire disc.  
12  
13  
Playing Audio CDs  
When playing an audio CD, the DISPLAY banner appears automatically. It  
displays the current track and the amount of the time for that track playing, the  
total amount of time on the disc and the current time running on the disc. Press  
the DISPLAY button on the remote to display the DISPLAY banner. The options  
below show you what happens when you press the DISPLAY button.  
SELECTING FOLDERS AND SONGS  
When an MP3 disc is inserted in the player, the navigation screen appears  
automatically. You can change folders and songs by navigating through the  
file system. The DVD player plays the songs in order they were burned onto  
the disc.  
1. If a disc is playing, press STOP. Press the UP or DOWN arrow button to go  
through the folder list on the left side of the navigation screen.  
Press DISPLAY (1x) – ”Single Elapsed” appears along with the current track  
number playing and the time of that track .  
Press DISPLAY (2x) – ”Total Remain” appears along with the current track  
number playing and the amount of time remaining on  
the entire CD.  
2. Once the folder you want is highlighted, press ENTER.  
3. Press the UP or DOWN arrow button going through the song list and highlight  
the song you want. Press ENTER to begin the playback of the highlighted song.  
Press DISPLAY (3x) – ”Single Remain” appears along with the current track  
number playing and the amount of time remaining.  
Press DISPLAY (4x) – ”Total Elapsed” appears along with the current track  
number playing and the total time playing on CD.  
SKIPPING SONGS  
Use NEXT (:) button on the remote control to move to the next song. Use  
the PREV (9) button to move to the beginning of the song currently playing.  
Press the button twice to move to the previous song.  
Using the REPEAT Feature  
SELECTING A PLAY MODE  
The default mode for the REPEAT feature is OFF. Pressing REPEAT button  
multiple times changes the REPEAT options as follows:  
Track - repeats the current track that is playing.  
All - repeats the entire disc that is currently playing.  
You can temporarily choose what order the songs will play on a disc. The  
FOLDER play mode is the default playback mode. To access the play mode  
options, press REPEAT button.  
The play mode options are as follows:  
Playing MP3 CDs  
MP3 is a format for storing digital audio. An audio CD quality song can be  
compressed into the MP3 format with very little loss of quality, while taking up  
much less disc space. CD-R/RW discs that have been encoded in MP3 format  
can be played on the integrated DVD player.  
Single: Plays a selected song.  
Folder: Plays the folder in the order the songs were recorded.  
Random: Plays the songs in the random order.  
Shuffle: Plays the songs in random order (from within the selected folder).  
USING THE REPEAT FEATURE  
The default mode for the repeat feature is OFF. Pressing REPEAT multiple times  
changes the repeat option:  
REPEAT One – repeats the song that is playing.  
REPEAT Folder – repeats the folder that is playing.  
14  
15  
IR Headphones  
Audio Playback  
The Vizualogic A-1250 and A-1150 System features multiple ways to enjoy the  
audio portion of a desired source. The audio can be experienced through the  
use of Infrared Headphones or with the integrated wireless FM Modulator  
The Vizualogic All-In-One System features integrated Infrared (IR) transmitters on  
the front of each monitor. The driver’s side monitor transmits on channel ‘A’ and  
the passenger side transmits on channel ‘B’. To listen to the source displayed on  
monitor, turn on the headphones and select the corresponding audio channel  
for the monitor being viewed. NOTE: Always adjust volume control on the  
headphones to the lowest setting before turning them on.  
FM Modulator Playback  
To listen to the audio portion of the viewed source though the vehicle’s  
stereo system aim the remote at the driver’s side monitor and simply press the  
FM SOURCE button to turn the FM modulator on. The screen will now display  
FM SOURCE: DRIVER DVD. The Audio portion of the source originating from  
the Driver's side headrest will now be audible through the vehicle's stereo. If a  
different audible source is desired, press the FM SOURCE button again to select  
from PASSENGER DVD, EXT AUX, and OFF. Once the desired audible source  
has been selected, the transmitting frequency the FM modulator transmits on  
can be changed by pressing the FM FREQ button on the remote. Tune the vehi-  
cle’s radio to the corresponding station to listen to the source that is displayed  
on the driver’s side monitor.  
To change the transmitting frequency, aim the remote at the driver’s side  
monitor and press the FM FREQ button. Each press of the button advances the  
frequency as follows:  
1. POWER OFF-ON – Manually turns the headphones on or off. POWER LED  
FM CH1 88.5MHz4FM CH2 88.7MHz4FM CH3 88.9MHz4FM CH4  
89.1MHz4FM CH5 89.3MHz4FM CH6 89.54FM CH7 89.74FM8 89.9  
will illuminate while the headphones are on.  
2. IR CHANNEL SELECTOR – Switches audio reception between IR Channel A  
To turn the FM Modulator Off aim the remote at the driver’s side monitor and  
press the FM SOURCE button repeatedly until FM OFF is displayed.  
and IR Channel B.  
3. POWER LED – Illuminates in red to indicate that headphones are on.  
NOTE: All of the FM Modulator control functions can also be controlled in a  
similar fashion using the buttons on the front of the monitor.  
4. VOLUME – Increases or decreases the volume output of the wireless  
headphones.  
16  
17  
OptionalAccessories  
To increase the enjoyment and utility of your Vizualogic System, several  
accessories are available from your local authorized distributor/retailer. For more  
Care and Maintenance  
Your Vizualogic System is a product of superior design and craftsmanship and  
should be treated with care. The suggestions below will help to fulfill any  
warranty obligations and provide many years of enjoyment.  
• Cleaning the Monitor Screen and Housing: The components may be cleaned  
by occasionally wiping with a soft, lint-free, cotton cloth that has been slightly  
dampened with water.  
WIRELESS STEREO HEADPHONES  
• 2-channel  
• IR headphones  
CAUTION: Do not use liquids, abrasives, aerosol cleaners, or paper  
cleaning products because they will result in permanent damage to the  
finish of your components! The LCD screen is made of a specially coated  
glass and can be scratched or damaged by abrasive or ammonia-based  
window cleaners.  
• Use and Storage:  
- These units contain precision electronics that must be protected from dust,  
dirt, and moisture.  
- Never spill liquids on any of the components. Liquids, humidity, and  
precipitation contain minerals that will corrode electronic circuits.  
AUXILIARY INPUT ADAPTER CABLE  
• 3.5mm to RCA  
• Take care to avoid the following:  
- Rough handling can break internal circuit boards. Do not drop, knock, or  
shake the components.  
- Do not attempt to paint or refinish the components. Paint can clog moving  
parts and prevent proper operation.  
- The components can be damaged by non-expert handling. Attempting to  
open any of the components may void the limited warranty.  
VIZUALOGIC VIDEO INPUT CABLE (VV I C)  
• 3.5mm to iPod dock connector  
18  
19  
Limited Warranty  
Troubleshooting  
No Picture  
Terms of Warranty  
(1) Verify that the correct video input mode is used on the monitor.  
(2) Verify that the video cables are securely connected.  
TMI Products, Inc (Company) warrants to the original retail purchaser that the automotive  
video product(s) purchased from a Company authorized installer, within the first ninety  
(90) days after new vehicle delivery, are free from defects in materials or workmanship  
under normal use and conditions for a period of at least three (3) years from date of  
purchase or the first 36,000 miles as registered on the vehicle’s odometer at time of  
installation, whichever occurs first, with exception of remote control(s), and / or  
headphones which is warranted for a period of sixty (60) days from date of purchase.  
Products purchased or installed more than ninety (90) after new vehicle delivery are  
warranted for a period of one (1) year from date of purchase. A sales receipt is required  
to provide proof of date of purchase.  
No Sound  
(1) Verify that the correct audio output mode is used on the monitor.  
(2) Verify that the audio cables are securely connected.  
(3) Ensure that the FM Transmitter has been turned on.  
IR Sensor Inoperative  
(1) Verify that the batteries in the remote are installed correctly and in good  
condition.  
Should the product(s) be determined defective during the applicable warranty period, the  
defect(s) will be repaired or replaced with a new or reconditioned part(s), at the  
Company’s option.  
(2) Verify that the remote sensor eye is not obstructed.  
Specifications  
EXCEPT AS EXPRESSLY SET FORTH IN THIS WARRANTY, THE COMPANY MAKES NO  
OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING ANY IMPLIED  
Display Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .LCD  
Screen Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7.0˝ (Diagonal)  
Resolution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .480(w) x 234(h)  
Brightness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .500 nits (typ.)  
Video Display System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .NTSC/PAL  
Horizontal View Angle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .120°  
Vertical View Angle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100°  
Operating Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .-30° to 80° C  
Expected Backlight Life . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15,000 hours (typ.)  
Operating Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 to 16V DC  
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR  
A
PARTICULAR  
PURPOSE. THE COMPANY EXPRESSLY DISCLAIMS ALL WARRANTIES NOT  
STATED IN THIS LIMITED WARRANTY. ANY IMPLIED WARRANTIES THAT MAY  
BE IMPOSED BY LAW ARE LIMITED TO THE TERMS OF THIS EXPRESSED  
LIMITED WARRANTY.  
20  
21  
How to Obtain Warranty Service  
To obtain warranty service, the product(s) must be returned to a Company  
authorized installer accompanied by proof of warranty coverage.  
Notes  
How State Law Relates to the Warranty  
Some states do not allow limitation on how long an implied warranty lasts. In  
such states, the limitations or exclusions of this Limited Warranty may not apply.  
Some states do not allow the exclusion or limitation of incidental or  
consequential damages. In such states, the exclusion or limitation of this  
Limited Warranty may not apply to you. This Limited Warranty gives you  
specific legal rights and you may have other rights which vary from state to  
state.  
What is Excluded from this Limited Warranty  
This limited warranty excludes:  
• Elimination of externally generated static or noise, or the correction of  
antenna problems or weak television reception.  
• Costs incurred for installation, removal or reinstallation of the product(s).  
• Damage to tapes, video games, software, camcorders, discs, speakers,  
accessories or vehicle electrical systems.  
• Cosmetic damage or damage due to negligence, misuse, abuse, failure to  
follow operating instructions, accidental spills or customer applied cleaners.  
• Damage due to environmental causes such as floods, airborne fallout,  
chemicals, salt, hail, windstorms, lightning or extreme temperatures.  
• Damage due to accidents, road hazards, fire, theft or vandalism.  
• Damage due to improper installation or connection, including connection to  
equipment of another manufacturer, modification of existing equipment, use  
of a faulty cassette tape or VCP head cleaning.  
• Product(s) which have been opened or tampered with for any reason or  
which have been damaged due to alteration or service performed by anyone  
other than the Company or a Company authorized installer.  
22  
23  
Notes  
24  

Vista Davis &amp; Sanford VOYAGER3H User Manual
Texas Instruments Nspire Navigator System NAVNSCRK302L1 User Manual
Star Manufacturing 6115RCBD User Manual
Sony WM FX227 User Manual
Sony Walkman WM FS220 User Manual
Sony FCB EX45MCC User Manual
Sony CDX GT420U User Manual
Sony BLU RAY DISC BDP BX57 User Manual
Sirius Satellite Radio STAREMATE REPLAY ST2 User Manual
Sennheiser Sound Field System EMP 2015 User Manual