Vivitar DVR 810HD User Manual

DVR 810HD  
Digital Video Camcorder  
User’s Manual  
© 2009 Sakar International, Inc. All rights reserved.  
Windows and the Windows logo are registered trademarks of Microsoft Corporation.  
All other trademarks are the property of their respective companies.  
Introduction  
Thank you for purchasing the DVR 810HD Digital Video Camcorder. With your  
camera you can shoot video clips, take individual photos and record audio files. In  
addition, a SD compatible memory card of up to 8GB needs to be inserted for  
normal use in order to expand the memory of your DVR camera.  
Key Features  
5 dial modes - Camera, Video, Audio, Playback and Set Up.  
Digital Video resolutions 1280x720 Pixels (HD), 640x480 (VGA), 320x240  
(QVGA).  
8.1 mega-pixels camera with choice of 6 digital camera resolutions- 8M, 7M ,5M,  
3M ,2M and 1.3 M  
2.7" TFT LCD  
8 X Digital Zoom  
Supports external SD memory card up to 8GB  
2
   
Built-in Microphone  
Takes digital photos, videos and record audio files  
Delete, rotate, protect, crop and print photos directly on and from your camera  
Vivitar Experience Image Manager software for uploading and managing photos  
and videos to or from the most popular photo sharing and social network  
websites.  
What your digital video camera includes  
Digital Video Camcorder  
USB cable  
TV cable  
Vivitar Experience Image Manager software Installation CD  
Quick Start Guide  
Wrist strap  
3
 
Computer System Requirements for Windows XP  
To be able to download photos and videos to your PC, you will need the following  
minimum configuration:  
Pentium 4 processor or above with Windows XP service pack 2  
512 MB RAM, with 100MB of free disk space  
1024 x 768 Recommended screen resolution  
16-bit color or higher display adaptor  
CD-ROM Drive  
QuickTime 6 or higher  
Microsoft Internet Explorer 7 or higher  
Windows Media Player 10 or higher  
Internet connection required  
Computer System Requirement for Windows Vista  
To be able to download photos and videos to your PC you will need the following  
minimum configuration:  
Windows Vista  
800MHz processor and 512 MB of system memory  
4
   
20GB hard drive with at least 15GB of available space  
Support for Super VGA graphics  
Available USB Interface  
CD-ROM drive  
QuickTime 6 or higher  
Microsoft Internet Explorer 7 or higher  
Internet connection required  
Computer System Requirements for Macintosh  
Macintosh with Intel processor running Mac OS X v10.4.6 or later  
256 MB RAM, 100 MB free disk space  
Display: 1024 x 768 or higher-resolution monitor  
QuickTime 6 or higher  
Internet connection required  
5
 
A Quick Look at your Digital Video Camera  
6
 
Preparing Your Camera for Use  
Battery Installation  
Your DVR camcorder requires 4 “AAA” batteries (not included). It is recommended that  
alkaline batteries be used.  
1.  
2.  
Open the battery compartment on the side of the camera.  
Insert the batteries in accordance with the polarity indicated in the battery  
compartment.  
3.  
Return and close the battery cover.  
7
 
Note:  
On removing the batteries from the camera all photos and videos clips in limited built-in  
memory will be lost.  
Limited internal memory is provided in order to test photos and videos  
A SD Memory card is required for normal use. All the media in the built-in memory will  
be lost if no SD Memory Card has been inserted in the DVR when you change your  
batteries.  
We strongly recommend downloading your photos and videos regularly to your  
computer.  
Remove the batteries from the DVR camera when not in use for an extended period.  
Inserting an SD Memory Card  
An SD compatible memory card of up to 8GB (not included) is needed for normal use and  
should be inserted into your DV camera. SD Memory cards expand the amount of  
memory thus allowing an increase in the number of movies, photos and audio that can be  
captured before transferring them to a computer.  
8
 
Media sitting on the memory card is not lost when your camera’s power runs low or on  
replacing the batteries.  
1. Locate the SD card slot on the bottom of the camera.  
2. Insert an SD memory card correctly in the direction shown.  
3. Press the memory card until you hear a Clicksound. The memory card when properly  
inserted will sit flush with the camera.  
Note: After you insert an SD memory card, the  
icon will appear on the LCD, indicating  
that your SD memory card has been installed successfully, and the media you capture will  
now be stored on the card and not in the limited internal memory.  
9
This product supports SD cards of up to 8GB.  
Formatting will delete all data on the SD Memory Card including protected data.  
Do not remove the SD memory Card during formatting as this may damage the card  
and render it unusable.  
Be sure to format the card with the camera.  
DVR Function Control  
To power on the camera you need to flip open the LCD Screen. The Power  
button is situated on the inside of the camera.  
Power on  
Press the Power button to turn on your DVR.  
The LCD monitor will light up indicating that your DVR is ready for use.  
Power off  
10  
 
Press the Power button to turn your DVR camera off. The DVR camera will switch off.  
If the DVR camera is not in use or in an operation mode for 60 seconds it will switch  
off automatically.  
When there is insufficient battery power, a Low Batterymessage will appear on the LCD  
screen. The camera will automatically power off a few moments later.  
Capturing Videos  
In order to capture videos (with audio) using your camera you need to turn the dial to  
the Video mode. This camera requires a compatible SD card of up to 8 GB for normal  
operation.  
The video  
1. Press the Record button to the right of the dial to start shooting.  
2. icon will appear and begin to flash. The elapsed time of the video will  
appear on the top right on the LCD.  
icon will now appear on the top left corner of the LCD.  
A
3. Press the Record button again to stop the recording.  
11  
4. The recorded file will be saved in AVI format.  
Note:  
1. During shooting the video you can adjust the zoom to focus in on your  
subject.  
2. You can view the AVI files in playback mode.  
3. Once they are downloaded to the PC view them using Quick Time and  
Windows Media Player.  
4. As the internal memory of the camera is limited it should be used for test  
files only.  
5. Please insert an SD memory card of up to 8 GB for normal use.  
6. When the internal memory is full, a “Disk Fullmessage will flash on the  
LCD screen when you attempt to shoot further videos.  
In Video mode there are three video resolutions for you to choose from before  
capturing your video. The higher the resolution selected the better the quality of the  
video, however higher quality videos use up more memory.  
To enter the Setup options for Video mode press on the OK button on the joystick.  
The different modes are explained in detail below.  
12  
Scene  
Your camcorder comes supplied with different scenes for you to take photos in  
almost every type of environment - Auto, Scenery, Night Scenery, Portrait, Night  
Portrait, Beach, Sports and Party.  
Select the scenery for the present light and environmental conditions.  
1. Press the OK button.  
2. Press the Right/Left joystick button to select the Scene icon  
the bottom left of the LCD.  
that appears on  
3. Press the Up/Down joystick button to select the desired scenery option from the  
menu that appears.  
4. Press the OK button to confirm, save your choice and exit.  
Note:  
After selecting your scenery, the corresponding icon will appear on the left hand  
side of the LCD.  
Resolution  
You can select different Video resolutions - High Definition (HD) 1280x720 pixels /  
VGA 640x480 pixels / QVGA 320x240 pixels  
1. Press the OK button.  
13  
2. Press the Right/Left joystick button to select the Resolution icon  
that  
appears on the bottom left of the LCD.  
.
3. Press the Up/Down joystick button to select the desired resolution option from the  
menu that appears.  
4. Press the OK button to confirm, save your choice and exit.  
Note:  
After selecting your resolution, the corresponding icon will appear on the left hand  
side of the LCD.  
Exposure  
This setting allows you to control the brightness of your images.  
1. Press the OK button.  
2. Press the Right/Left joystick button to select the Exposure option.  
3. Press the Up/Down joystick button to select an exposure value (from +3 to -3)  
from the menu that appears.  
4. Press the OK button to confirm, save your choice and exit.  
Note:  
The corresponding exposure number will appear on the left side of the LCD screen.  
14  
White Balance  
This setting is used to adjust the color of your videos as per your light source.  
1. Press the OK button.  
2. Press the Right/Left joystick button to select the White balance option.  
3. Press the Up/Down joystick button to choose the best option from the menu that  
appears: Auto/Daylight/Cloudy/Fluorescent/Incandescent.  
4. Press the OK button to confirm, save your choice and exit.  
Note:  
The corresponding White Balance icon will appear on the left side of the LCD screen.  
.
Noise Reduction  
Your camcorder has a built-in function to reduce noise during recordings  
.
1. Press the OK button.  
2. Press the Right/Left joystick button to select the Noise Reduction option.  
3. Press the Up/Down joystick button to choose On or Off from the menu that  
appears.  
4. Press the OK button to confirm, save the choice and exit.  
15  
Note: The corresponding Noise Reduction icon will appear on the left side of the  
LCD screen.  
Taking photos  
After you power on your camcorder, switch the mode dial to the camera  
The camera icon will now appear on the top left corner of the LCD screen.  
icon.  
The camera`s internal memory is limited to a few photos per each resolution.  
Important: Insert a compatible SD card of up to 8GB for normal camera use  
Use the image that appears in the LCD to compose your shot.  
1. Hold the camera steady and press the shutter button on the top of the camera  
near the zoom control.  
2. The camera will beep and the picture taken is now saved to the memory.  
3. The number of photos that can be taken for each resolution and per the memory  
card inserted appears on the top right of the LCD screen.  
4. After the shot is taken the number is reduced by one.  
16  
5. When the camcorder's internal memory is full, “Disk Fullwill appear on the LCD  
screen when you attempt to press the Shutter button to take a photo. Either  
download the photo to your computer using the Vivitar Experience Image  
Manager software as described below in the section “Transfer photos and  
videos to your computer” and thereafter delete them from your SD card or  
insert another SD card to continue taking more photos and videos  
6. The number of photos that can be captured not only depends on the SD card’s  
capacity but also on the resolution selected. Better quality photos are taken at  
higher resolutions but these will also take up more memory on the card.  
Delete last file  
While in camera mode, you can delete the last photo taken.  
1. Press the Right/Delete joystick button.  
2. A Delete message appears on the LCD  
3. Use the Right/Left joystick button to select either Yes” or “No.  
4. Press the OK button to confirm and save your choice and revert to the camera  
mode.  
17  
Digital Zoom function  
You can magnify your subject up to 8 times using the digital zoom.  
1. Press the T/W button found at the top of the camera to the right to zoom in to  
the object.  
2. Press the T/W button left to zoom back out.  
3. The digital zoom icon  
will appear on your LCD screen.  
Self-Timer  
You can include yourself in a photo by using this feature to delay the time  
between your pressing of the shutter button and when the photo is actually taken.  
1. Press the OK button  
2. Press the Right/Left joystick button to select the Self Timer icon  
bottom left of the LCD screen.  
on the  
3. Press the Up/Down joystick button to select one of the options 5S/10S/Off  
from the menu that appears.  
4. Press the OK button to confirm, save the choice and exit.  
5. The Self Timer icon selected now appears on the top of the LCD.  
6. Press the Shutter button to begin the timer to take the photo.  
7. The timer countdown will appear in the center of the LCD accompanied by loud  
beeps until the photo is taken.  
18  
Note: For quick Self Timer settings whilst in the Camera mode you can press the  
Left joystick button to select the self timer options 5S/10S/Off. The camera will  
beep and the Self Timer icon on the top of the LCD will change as per your choice.  
Multi-Snapshot  
Take 3 consecutive photos automatically.  
You will need an SD card inserted in order to use this feature  
1.  
2.  
3.  
Press the OK button.  
Press the Right/Left joystick button to select the Multi-Snapshot option.  
Press the Up/Down joystick button to select On from the menu that  
appears.  
4.  
5.  
6.  
Press the OK button to confirm, save the choice and exit.  
Press the shutter button.  
The camera will take 3 consecutive photos  
Note: The default setting for the Multi-snapshot icon that appears at the top of the  
LCD is Off.  
Resolution  
19  
The image size and quality settings determine the number of photos that can be  
saved and the amount of memory required for each photo. The higher the quality  
of the photo the more memory it will take. The image size and quality will also  
affect the maximum size you can print your photo effectively.  
To set the resolution:  
1.  
2.  
Press the OK button.  
Press the Right/Left joystick button to select icon  
bottom left of the LCD.  
option on the  
3.  
4.  
Press the Up/Down joystick button to select the resolution size you  
choose 8M, 7M, 5M, 3M, 2M or 1.3M.  
Press the OK button to confirm.  
Note: The resolution icon appears beneath the camera icon on the LCD  
screen.  
Quality  
The quality of your photos also affects the number of shots you can take. The  
Super setting means you can take fewer photos, but they will be better quality.  
1.  
2.  
3.  
Press the OK button.  
Press the Right/Left joystick button to select the Image Quality option.  
Press the Up/Down joystick button to select the quality you desire –  
Super/Fine/Normal.  
20  
4.  
Press the OK button to confirm.  
Note: The corresponding Quality icon will appear at the top left of the LCD  
screen.  
ISO  
This is a special function that allows you to compensate the light conditions when  
the light source is not good and also where you are not using the flash or tripod.  
When you want to use ISO sensitization, please choose the low ISO value to  
prevent blotches appearing on your photo.  
1.  
2.  
3.  
Press the OK button.  
Press the Right/Left joystick button to select the ISO option.  
Press the Up/Down joystick button to select an ISO value from the  
menu that appears 100/200/400/800/1600/3200.  
Press the OK button to confirm, save and exit.  
4.  
Note: The corresponding ISO icon will appear on the LCD screen.  
Sharpness  
21  
This setting allows you to adjust the sharpness of your images, making edges  
more or less distinct.  
1.  
2.  
3.  
Press the OK button.  
Press the Right/Left joystick button to select the Sharpness option.  
Press the Up/Down joystick button to select a sharpness value form the  
menu that appears Soft/Normal/Sharp.  
4.  
Press the OK button to confirm, save your choice and exit.  
Anti-Shake  
Your Digital Camcorder has a function that prevents blurry photos as a result of  
trembling when taking photos. Due to this function, you are not required to use a  
tripod for steady shooting photos.  
To set as below:  
1.  
Press the OK button.  
2.  
3.  
Press the Right/Left joystick button to select the icon  
Press the Up/Down joystick button to select On from the menu that  
appears.  
option  
4.  
Press the OK button to confirm, save and exit.  
Note: The icon  
will appear on the LCD screen.  
22  
Time Stamp  
With this function, you may record the date and time on your photo.  
1.  
2.  
3.  
4.  
Press the OK button.  
Press the Right/Left joystick button to select the Time Stamp option.  
Press the Up/Down joystick button to select On/Off from the menu.  
Press the OK button again to confirm, save and exit.  
Scene  
Your camcorder comes supplied with different scenes for you to take photos in  
almost every type of environment - Auto, Scenery, Night Scenery, Portrait, Night  
Portrait, Beach, Sports and Party.  
Select the scenery for the present light and environmental conditions.  
1.  
2.  
3.  
4.  
Press the OK button.  
Press the Right/Left joystick button to select the Scene icon  
appears on the bottom left of the LCD.  
Press the Up/Down joystick button to select the desired scenery option  
from the menu that appears.  
that  
Press the OK button to confirm, save your choice and exit.  
23  
Note:  
After selecting your scenery, the corresponding icon will appear on the left hand  
side of the LCD.  
Exposure  
This setting allows you to control the brightness of your images.  
1. Press the OK button.  
2. Press the Right/Left joystick button to select the Exposure option.  
3. Press the Up/Down joystick button to select an exposure value (from +3 to -3)  
from the menu that appears.  
4. Press the OK button to confirm, save your choice and exit.  
Note:  
The corresponding exposure number will appear on the left side of the LCD screen.  
White Balance  
This setting is used to adjust the color of your videos as per your light source.  
1. Press the OK button.  
2. Press the Right/Left joystick button to select the White balance option.  
24  
3. Press the Up/Down joystick button to choose the best option from the menu that  
appears: Auto/Daylight/Cloudy/Fluorescent/Incandescent.  
4. Press the OK button to confirm, save your choice and exit.  
Note:  
The corresponding White Balance icon will appear on the left side of the LCD  
screen.  
.
Audio Mode  
An SD card needs to be inserted to use this mode.  
Switch the mode dial to the position.  
1. Press the Shutter button to start recording audio files.  
2. The elapse time will appear on the LCD screen.  
3. Press the Shutter button to stop and save the file as a WAV audio on your  
SD memory card.  
Playback mode  
25  
Switch the mode dial to the  
videos in your camcorder.  
icon position. You can playback the photos and  
In Playback mode you can rotate, protect, delete your photos and you can  
protect and delete video clips. You can also print photos directly from your  
camcorder using PictBridge.  
Note:  
If there are no images in your memory the No FILE” message will appear on  
the LCD screen.  
Thumbnail display  
When the camcorder is in the Playback Mode  
1. Press the Up button for the images to appear as thumbnails.  
2. Select a JPG file and press the OK button for the image to appear in full  
screen.  
3. In full screen display mode, you can press the W/T button right/left to enter  
zoom in/out mode  
4. Press the Up/Down/Left/Right joystick button to scroll through the photo.  
Note: when you select a JPEG file, the icon  
will appear on the LCD screen.  
Operation for still photos  
26  
Select a still photo (an icon  
will show on the LCD).  
You now have the option to edit these photos - delete, rotate, protect, crop or  
print.  
Protect  
You can protect your photos/videos from accidental deletion.  
1. Press the OK button.  
2. Press the Right/Left joystick button to select the Protect option.  
3. Press the Up/Down joystick button to select one of Lock One/Lock  
All/Unlock One/Unlock All.  
4. Press the OK button to confirm, save and exit.  
Note: At step 3, select Unlock one/Unlock alland press OK button to  
unlock the file.  
Rotate  
You can rotate photos on the camera  
1. Press the OK button.  
2. Press the Right/Left joystick button to select the Rotate option.  
3. Press the Up/Down joystick button to select how much degrees you want  
to rotate the photo.  
4. Press the OK button to confirm, save and exit.  
27  
Delete  
You can delete unwanted photos and videos at any time to free up  
memory. You can delete one image or video clip at a time or delete all the  
unprotected photos and videos that are currently recorded on the memory  
card at once.  
1. Press the OK button.  
2. Press the Right/Left joystick button to select the Delete option.  
3. Press the Up/Down joystick button to select either This Image/This Video  
(to delete the currently selected image) or ALL (delete all unprotect  
images).  
4. Press the OK button.  
5. A Delete message will appear.  
6. Press the Right/Left joystick button to select Yesor No.  
7. Press the OK button to confirm, save your choice and exit.  
.
Print directly with PictBridge  
Your camcorder allows you to print photos directly from your camera to a  
compatible printer with PictBridge.  
1. Select a photo you want to print.  
2. Press the OK button.  
28  
3. Press the Right/Left joystick button to select the PictBridge  
option.  
4. Press the Up/Down joystick button and select PictBridge to print the photo.  
5. Press the OK button to enter the PictBridge mode. If you are not  
connected to a printer the following message will appear on the LCD  
Please connect to device.  
6. Connect your camcorder to a compatible printer with the provided USB  
cable to allow for direct printing.  
7. If you wish to print the selected photo select the "This Image" option.  
8. Press the OK button to start Printing.  
9. If you want to print another photo, select "Select Image" option.  
10. Press the OK button.  
11. Press the Left/Right button to select the photo you wish to print.  
12. Press the OK button and select "This Image" to start printing.  
Operation for AVI file  
You can playback AVI files recorded on your camera  
1. Select an AVI file you want to play.  
2. Press the Record button to start playing the file.  
3. Press the Record button again to stop.  
29  
Note: For how to protect and delete photos/videos, please refer to the  
Operation of still photos section above.  
Setup Mode  
To access the Setup mode turn the mode dial all the way to the left to Set Up.  
In this mode you can set the Default setting, Format, Date format, Time format,  
Date/Time setting, Frequency, TV-out, Auto power off and Buzzer.  
Default setting  
1.  
2.  
3.  
4.  
Press the OK button.  
Press the Right/Left joystick button to select the Default Setting option.  
Press the Up/Down joystick button to select Yes” or “No.  
Press the OK button to confirm, save your choice and exit.  
Format  
You can delete all files in internal memory or SD memory card by using this  
feature.  
Caution: Please make sure to download the images first before using this  
30  
feature as all the images sitting in the card will be erased from the card or  
internal memory. This process is irreversible.  
1.  
2.  
3.  
4.  
5.  
6.  
7.  
Press the OK button.  
Press the Right/Left joystick button to select the Format option.  
Press the Up/Down button to select OK” or “Cancel”  
Press the OK button.  
A Format message will appear on the LCD.  
Press the Right/Left joystick button to select Yes” or “No.  
Press the OK button to confirm, save and begin the format.  
Date Format  
You can set the date format that will appear on the LCD as well as in the  
metadata of the photo.  
1.  
2.  
3.  
Press the OK button.  
Press the Right/Left joystick button and select the Date Format option.  
Press the Up/Down joystick button to select one of the following date  
formats - YY/MM/DD; MM/DD/YY; DD/MM/YY; Hide.  
4. Press the OK button to confirm, save and exit to the LCD screen.  
Note: the Date format will be displayed on the LCD screen in both the camera  
mode and video mode. If you selected Hide in step 3, it wont be displayed on  
the screen.  
31  
Time Format  
You can set the time up in either a 12 hour or 24 hour format.  
1. Press the OK button.  
2. Press the Right/Left joystick button and select the Time Format option.  
3. Press the Up/Down joystick button to select one of 12 hour/24 hour/Hide.  
4. Press the OK button to confirm, save and exit.  
Note: the Time format will be displayed on the LCD screen in both the camera  
mode and video mode. If you selected Hide in step 3, it wont be displayed on  
the screen.  
Date/Time Setting  
Set the correct date and time via this function.  
1. Press the OK button.  
2. Press the Right/Left joystick button and select the Date/Time Setting  
option.  
3. Press the Up/Down joystick button to select Date/Time Setting.  
4. Press the OK button to confirm.  
5. Now you can select and highlight the Time/Date options by pressing  
the Right/Left joystick button.  
6. Press the Up/Down joystick button to set the date and time.  
32  
7. Once you have set the Date and Time continue to use the Left/Right  
joystick button to select the Confirm option.  
8. Press the OK button to confirm, save and exit.  
Note: the Date/Time format will be displayed on the LCD screen in both the  
camera mode and video mode.  
Frequency  
Generally speaking, 60HZ is for the U.S. and 50HZ for Europe and Japan.  
The default setting is 60HZ  
1.  
2.  
3.  
4.  
Press the OK button.  
Press the Right/Left joystick button to select the Frequency option.  
Press the Up/Down joystick button to select 50/60Hz from the menu.  
Press the OK button to confirm, save and exit.  
TV Out  
The image of the picture you wish to capture on the LCD can also be  
displayed on your TV screen instead when using the TV cable provided.  
1.  
2.  
Press the OK button.  
Press the Right/Left joystick button to select the TV Out option.  
33  
3.  
Press the Up/Down joystick button to select either NTSC or PAL mode  
according how your TV is set.  
4.  
5.  
Press the OK button to confirm and save this choice.  
Connect your DVR to your TV with the supplied TV cable.  
Auto Power Off  
In order to conserve the energy supply of your camera when it is not in use  
you can set the time the camcorder will automatically turn off when not  
active.  
1. Press the OK button.  
2. Press the Right/Left joystick button to select the Auto Power off option.  
3. Press the Up/Down joystick button to select one of 1 Minute/2Minutes/Off.  
4. Press the OK button to confirm and save your choice  
Note: If you select “Off” from the menu your camera will never automatically turn  
off.  
If left on for an extended period of time without turning it off yourself this will lead  
to the batteries being drained quicker.  
Buzzer  
Your camcorder emits a beep or buzzer sound when you press any button.  
The default setting is on. To set this buzzer on or off  
1.  
Press the OK button.  
34  
2.  
3.  
4.  
Press the Right/Left joystick button to select the Buzzer option.  
Press the Up/Down button to select either “Buzzer on” or “Buzzer off.  
Press the OK button to confirm and save your choice.  
Install the Vivitar Experience Image Manager Software  
Warning: Do not plug your camera into the computer until the software  
installation is complete.  
You must be connected to the internet to install and run the Vivitar  
Experience Image Manager software.  
1. Insert the installation CD into your CD-ROM drive. The installation screen should  
automatically open.  
35  
 
2. On PC: The Vivitar Experience Image Manager Installer window appears. If the  
window does not appear, open the application’s CD/DVD drive and click on  
“Setup.bat” to launch the installer.  
3. On Macintosh: Click the icon to install the Vivitar Experience Image Manager.  
4. If you do not have internet access at the time of inserting the CD-ROM, connect  
to the internet and then click the “Install Vivitar Experience Image Manager”  
button to begin the installation  
Note: If you do not have internet access, you can still download media from the  
36  
camera. Click the “How to transfer photos and videos from my camera to my  
computer” button for instructions.  
5. If you have internet access, the “Choose your language” window opens, choose  
your language and click “Next” to open the next window.  
6. Select your camera model from the list and click “Next” to open the next window.  
7. Click “Next” to confirm your camera model selection and to install the application.  
8. Please wait while the application is being installed on your computer.  
37  
9. Please review the license terms.  
On PC: Click the “I Agree” button to continue.  
On Macintosh: Click the “I accept the terms of this license agreement” and then  
click “Next” to continue.  
10. On PC only: Let the “Vivitar Experience Image Manager” installer create the  
folder to where the program will be installed, and then click “Install”.  
11. Please wait while the application continues the installation process on your  
computer.  
12. On PC: Click the “Close” button when the installation is complete.  
On Macintosh: Click the “Quit” button when the installation is complete.  
13. Click the “Launch Vivitar Experience Image Manager” to open the application or  
close the window and run the Vivitar Experience Image Manager from your  
computer.  
38  
Connect your camera to the computer  
1. Use the USB cable that came with your camera to connect your camera to your  
computer.  
2. Turn your camera on.  
3. The first time you connect the device to the computer you will have to wait a few  
seconds until the computer recognizes the device.  
Get photos and videos from your camera to your  
computer  
An SD card needs to be inserted. Do not disconnect the cable during transfer. Doing  
so will cancel the transfer of any files on their way to your computer.  
1. Select the “Get images” button from the Main menu.  
39  
   
2. The “Get media from device” window opens.  
40  
3. You can select to download photos, videos or both.  
4. Select your camera (removable disk) from the device window. If your camera is  
the only USB device connected then it will be selected automatically.  
5. Select a location on the computer where to place the new photo and video files.  
6. Add the new photo and video files to albums if desired.  
7. Select to remove the media files from the selected device (removable disk) after  
the import.  
8. Click the “Get media” button to transfer the photos and videos from your camera  
to your computer.  
A media download progress bar appears on the bottom left showing the number  
of media files downloading to your computer. A message appears when the  
download is complete.  
9. The photo and video files that you selected are now downloaded to your  
computer to the selected folder and albums ready for your use.  
Get started!  
Using the Vivitar Experience Image Manager, you can upload and manage photos and  
videos to and from the most popular photo sharing and social networking sites -  
Facebook, Flickr, MySpace, Picasa, Photobucket and YouTube. Seamlessly transfer  
photos and videos from one social network to another. Organize your images by  
creating offline and online albums. Edit images using automatic and manual tools. Use  
automatic “Geotagging” with built in Google Maps.  
41  
 
For more details on how to use the Vivitar Experience Image Manager open the  
Help file or click the “Take the Tour” button on the application`s Home page.  
Transfer media from my camera to my computer manually (Using  
Windows)  
1. Use the USB cable that came with your camera to connect your camera to your  
computer.  
2. A window appears with a list of options, select “Open folder to view files” and click  
OK.  
3. Open the DCIM folder and the folder inside to view the media files.  
4. Select the media and copy the files from this folder into your computer.  
Optionally, select the files and choose Copy from the Edit menu. Then select a  
folder and choose Paste from the Edit menu.  
5. We recommend that you copy the images into the Pictures/My Pictures folder and  
the videos into the Videos/My Videos folder.  
6. Do not disconnect the cable during transfer. Doing so will cancel the transfer of  
any files on their way to your computer.  
Transfer media from my camera to my computer manually (Using  
Macintosh)  
1. Use the USB cable that came with your camera to connect your camera to your  
42  
   
computer.  
2. The camera’s device icon appears on the desktop.  
3. Click on the device icon and open the DCIM folder and the folder inside to view  
the media files.  
4. Select the files and drag them into your computer. Optionally, select the files and  
choose Copy from the Finder’s Edit menu. Then select a folder and choose Paste  
from the Edit menu.  
5. We recommend that you copy the images into the Pictures folder and the videos  
into the Movies folder.  
6. Do not disconnect the cable during transfer. Doing so will cancel the transfer of  
any files on their way to your computer.  
Maintenance of Your Digital Camera  
The digital camera is a delicate device. Please handle your camera with care to avoid  
damaging it.  
Sakar Warranty Card  
This warranty covers for the original consumer purchaser only and is not transferable.  
Products that fail to function properly UNDER NORMAL USAGE, due to defects in  
material or workmanship. Your product will be repaired at no charge for parts or labor for  
a period of one year.  
43  
   
What Is Not Covered By Warranty:  
Damages or malfunctions not resulting from defects in material or workmanship and  
damages or malfunctions from other than normal use, including but limited to, repair by  
unauthorized parties, tampering, modification or accident.  
What To Do When Service Is Required:  
When returning your defective product (postage pre-paid) for service, your package  
should include:  
1. Copy of original bill of sale  
2. A detailed written description of the problem.  
3. Your return address and telephone number (Daytime)  
MAIL TO ADDRESS BELOW:  
Sakar International  
Attention: Service Department  
195 Carter Drive  
Edison, NJ 08817  
TECHNICAL SUPPORT  
For technical support issues please visit our website at www.vivitar.com. You can find  
manuals, software and FAQ’s at the website. Can’t find what you are looking for? E-mail  
us at [email protected] and one of our technical support team members will answer  
your questions. For phone support in the US please call 1-800-592-9541, in the UK call  
44  
0800 917 4831. If you would like to call from anywhere else, please visit www.vivitar.com  
for your local toll free number.  
Technical Specifications  
Image Sensor  
CMOS Sensor  
3264*2448(8.1M),3072*2304(7.0M),  
2592*1944(5.0M),2048*1536(3.0M),  
1600*1200(2.0M). 1280*960 (1.3M)  
HD: 1280*720p (20fps);  
VGA: 640*480 (30fps );  
QVGA: 320*240 (30fps )  
2.7’’TFT(4:3)  
Image  
Resolution  
Video  
Resolution  
LCD Display  
LCD Swivel  
90°  
Internal Memory  
External  
Memory  
16MB  
SD card up to 8 GB  
Example: External Memory of 2GB SD Card:  
Video: HD/16min; VGA/29min; QVGA/60min  
Images: 8.1M/2088; 7.0M/2164; 5.0M/2880;  
3.0M/4016;2.0M/5730;1.3M/7612.  
f=7.45mm, F=2.8  
Storage  
capability  
Lens  
45  
 
Digital Zoom  
Self-timer  
File Format  
Anti-Shake  
TV out  
8x  
5s/10s  
JPEG ( Still Image) /AVI ( Video) / WAV (Audio)  
YES  
YES  
Microphone  
Speaker  
YES  
YES  
Recorder  
Interface  
YES  
USB 2.0  
System  
Requirements  
Windows XP, VISTA or Mac OS X (10.4.6 or higher)  
Battery  
Working  
Temperature  
4*AAA  
0-40 C  
46  
Trouble Shooting  
Q: I have taken photos and selected the “Get Images” button. I get a message  
that the images were successfully transferred but the photos do not appear on  
my computer. What do I do?  
47  
 
First ensure that you have in fact taken photos. Press the Shutter button to take  
some sample photos and then try downloading them again.  
With test photos if the camera powers off before you upload them to the computer  
the photos are not stored in the camera`s memory. These photos should be  
uploaded quickly before the camera powers off.  
If the photos are saved to the SD memory card then all the photos should appear.  
Q: How do I make sure I don't lose important pictures?  
Your camera uses SDRAM memory, which requires a constant electric current to  
store your test photos.  
Should your camera lose power (for instance if the battery dies or run out of power)  
all stored pictures will be lost. This camera requires an SD card for normal use. If  
the camera powers off nothing will happen to the images stored on the SD memory  
card. We recommend always downloading your photos to your computer as soon  
as possible to prevent unintentional data loss.  
Q: I deleted images using the Vivitar Experience Image Manager. The photo was  
also deleted from my computer. How do I recover photos that I accidently  
deleted?  
All images deleted using the Vivitar Experience Image Manager are sent to your  
computer`s Recycle or Trash Bin and can be retrieved from there.  
RP08DVDV030C7RKSE00  
A00-090518GES  
48  

Westcott 1809 User Manual
Transition Networks MEDIA CONVERTERS E 100BTX FRL 01(SC) User Manual
Tiffen Davis & Sanford ATPXT User Manual
Sub Zero ICB430 User Manual
Sony Wide Conversion Lens VCLHGA07B User Manual
Sony DCR TRV5 User Manual
Sony DCR SX20K User Manual
Sony CX520VE User Manual
Samsung LN37A330JD User Manual
Samsung HMX Q130BP User Manual