Quick Start Guide Model: 1460-4
Your new Victor calculator is versatile and loaded with features. Complete directions, explanation of key
functions and user examples can be found in the enclosed instruction manual. Quick Start will guide you
through the important settings prior to operation.
taking a few moments to register your product are:
1. Verifies the date of purchase in the event of a warranty claim.
2. If you need support, your registration helps Victor find your product quickly and provide the
assistance you need.
3. Online registration gives you the option to save a copy of your registration for your personal records.
STEP 2 Before using the printer for the first time
1. Slide off printer cover.
2. Remove the tape holding the twin spool ribbon in place.
3. Slide printer cover back into place.
STEP 3 Load the Paper
1. Turn ON calculator and set the slide switch P/NP/IP to the P position.
2. Place paper holder into position.
3. Install the paper roll on the holder.
4. Insert the paper into the printer slot.
5. Press the feed key
to feed paper to desired length.
The following parts and accessories are available for your Victor 1460-4, and may be purchased from your
7010 Twin Spool Ribbon
7050 Paper Rolls
140 Sticky Add Roll
LS-125 Calculator Stand
TROUBLESHOOTING
1. Plug machine directly into wall outlet.
2. Turn ON and set slide switch P/NP/IP to P position.
3. Use a paper clip to depress the RESET button; located on the bottom of the calculator in the lower
right corner.
4. Listen for activation noise.
5. Turn the machine right side up.
6. Test the machine.
If this procedure has not successfully resolved your problem or you have any questions regarding the
operation of your Victor calculator, contact Victor’s Customer Care Center at (800) 628-2420 or E-mail
[email protected] for further assistance.
Victor Technology
175 E Crossroads Parkway Suite D Bolingbrook, IL 60440 USA
Tel: (630) 754-4400
Fax: (630) 972-3902
Toll Free: (800) 628-2420
|