BLU-RAY DISC / DVD VIDEO PLAYER
DBP-1610
Owner’s Manual
Manuel de I’Utilisateur
Manual del Usuario
T Button illustrations used in this manual for operation explanation are
for the Remote Control Unit.
You can operate the unit using the button of the same name on the
front panel of the unit.
T Les illustrations des boutons présentes dans ce manuel servent à
expliquer le fonctionnement de la télécommande.
Vous pouvez contrôler l’appareil à l’aide du bouton portant le même
nom sur la façade de l’appareil.
T Las ilustraciones de los botones utilizadas en este manual con
propósitos de explicación son para la unidad del mando a distancia.
Puede operar la unidad utilizando el botón del mismo nombre en el
panel delantero de la unidad.
ESPAÑOL FRANÇAIS ENGLISH
ⅥNote on use / Observations relatives a l’utilisation / Notas sobre el uso
CLASS 1
LASER PRODUCT
Do not place the unit on the furniture that is capable of being
tilted by a child and an adult leaning, pulling, standing or
climbing on it. A falling unit can cause serious injury or even
death.
•
•
•
Keep the apparatus free from moisture, water, and
dust.
Protéger l’appareil contre l’humidité, l’eau et
lapoussière.
Mantenga el equipo libre de humedad, agua y
polvo.
•
•
•
Do not let foreign objects into the apparatus.
Ne pas laisser des objets étrangers dans l’appareil.
No deje objetos extraños dentro del equipo.
ⅥCopyrights / Droits d’auteur / Derechos de Autor
•
•
•
Avoid high temperatures.
Allow for sufficient heat dispersion when installed
in a rack.
Eviter des températures élevées.
Tenir compte d’une dispersion de chaleur suffisante
lors de l’installation sur une étagère.
Evite altas temperaturas.
Permite la suficiente dispersión del calor cuando
está instalado en la consola.
• It is prohibited by law to reproduce, broadcast, rent or play discs
in public without the consent of the copyright holder.
• La reproduction, la diffusion, la location, le prêt ou la lecture
publique de ces disques sont interdits sans le consentement du
détenteur des droits d’auteur.
• De acuerdo con las leyes está prohibido reproducir, emitir,
alquilar o interpretar discos en público sin la autorización del
propietario de los derechos de autor.
•
•
Unplug the power cord when not using the
apparatus for long periods of time.
Débrancher le cordon d’alimentation lorsque
l’appareil n’est pas utilisé pendant de longues
périodes.
•
•
•
Do not let insecticides, benzene, and thinner come
in contact with the apparatus.
Ne pas mettre en contact des insecticides, du
benzène et un diluant avec l’appareil.
No permita el contacto de insecticidas, gasolina y
diluyentes con el equipo.
•
Desconecte el cordón de energía cuando no utilice
el equipo por mucho tiempo.
•
•
•
Handle the power cord carefully.
Hold the plug when unplugging the cord.
Manipuler le cordon d’alimentation avec précaution.
Tenir la prise lors du débranchement du cordon.
Maneje el cordón de energía con cuidado.
Sostenga el enchufe cuando desconecte el cordón
de energía.
* (For apparatuses with ventilation holes)
•
Never disassemble or modify the apparatus in any
way.
•
•
•
Do not obstruct the ventilation holes.
Ne pas obstruer les trous d’aération.
No obstruya los orificios de ventilación.
•
•
Ne jamais démonter ou modifier l’appareil d’une
manière ou d’une autre.
Nunca desarme o modifique el equipo de ninguna
manera.
II
ENGLISH
Contents
Virtual Surround ................................................................................... 24
Pure Direct Mode ................................................................................. 24
Playing Back an Audio CD or a Disc with DivX®/MP3/
Kodak Picture CD ................................................................................. 27
Cleaning Discs ......................................................................................... 3
Unplayable Discs .................................................................................... 5
Color Systems .......................................................................................... 5
Loading the Batteries ............................................................................ 6
Setting this Unit not React to Other DENON’s DVD Player’s
Front Panel ............................................................................................... 7
Rear Panel ................................................................................................. 7
Connecting to a TV ...............................................................................11
Connecting to a Display Device and an Amplifier/
Audio Setting .........................................................................................12
Digital Connection to an AV Amplifier with Built-in
Connection to a Device with 2-channels of Analog
Connection Test ................................................................................... 38
Enable(Easy) ........................................................................................... 38
Enable(Custom) .................................................................................... 38
Disable ..................................................................................................... 40
Operations Using Disc Menu, Title Menu, and
1
ENGLISH
ENGLISH
Introduction
• Noise or disturbance tends to occur particularly when using
indoor antennas or 300Ω/ohms feeder wires. We recommend
using outdoor antennas and 75Ω/ohms coaxial cables.
Important
Dew Warning
Moisture condensation may occur inside the unit when it is
moved from a cold place to a warm place, or after heating a cold
room or under conditions of high humidity. Do not use the unit at
least for 2 hours until its inside is dry.
Use only discs marked with logos listed on page 4.
Power Supply
Note
• For heat dispersal, do not install this equipment in a
confined space such as a book case or similar unit.
The main power supply is engaged when the main plug is
plugged in a 120V, 60Hz AC outlet. To operate the unit, press
[POWER ON] or <ON/STANDBY> to turn on the unit.
Avoid the Hazards of Electrical Shock and Fire
• Do not handle the AC cord with wet hands.
• Do not pull on the AC cord when disconnecting it from AC wall
outlet. Grasp it by the plug.
• If, by accident, water is spilled on this unit, unplug the AC cord
immediately and take the unit to our authorized service center
for servicing.
Warning
To avoid fire or electric shock, do not expose this unit to rain or
moisture.
10 cm or more
WARNING:
LIVE PARTS INSIDE.
DO NOT REMOVE ANY SCREWS.
ON / STANDBY
SD CARD
Before Using
Pay attention to the following before using this unit:
●Moving the unit.
Installation Location
For safety and optimum performance of this unit:
To prevent short-circuits or damaged wires in the connection
cables, always unplug the power supply cord and disconnect the
connection cables between all other audio components when
moving the unit.
• Do not stand the unit up vertically. Install the unit in a horizontal
and stable position. Do not place anything directly on top of the
unit. Do not place the unit directly on top of the TV.
• Shield it from direct sunlight and keep it away from sources of
intense heat. Avoid dusty or humid places. Avoid places with
insufficient ventilation for proper heat dissipation. Do not block
the ventilation holes on the sides of the unit. Avoid locations
subject to strong vibration or strong magnetic fields.
• Be sure to remove a disc and unplug the AC cord from the outlet
before carrying the unit.
●Store the owner’s manual in a safe place.
After reading the owner’s manual, store it in a safe place as it
could come in handy in the future.
●Whenever <ON/STANDBY> is in the STANDBY state, the unit
is still connected to AC line voltage.
Please be sure to unplug the cord when you leave home for, say,
a vacation.
Wall
Cautions on Handling
●Cautions on using mobile phones.
Using a mobile phone near this unit may result in noise. If so,
move the mobile phone away from this unit when it is in use.
●Before turning the power operation button on.
Check once again that all connections are correct and that there
are no problems with the connection cables. Always set the
power operation button to the standby position before
connecting and disconnecting connection cables.
●Sufficiently ventilate the place of installation.
If the unit is left in a room full of the smoke from cigarettes, etc.,
for long periods of time, the surface of the optical pickup could
get dirty, in which case it will not be able to read the signals
properly.
●Note that the illustrations in these instructions may differ
from the actual unit for explanation purposes.
Non-use periods - Turn off the unit when it is not in use. Unplug
the unit from the household AC outlet if it is not to be used for a
long time. Unplug the unit during lightning storms.
About Copyright
Unauthorized copying, broadcasting, public performance and
lending of discs are prohibited.
This product incorporates copyright protection technology that is
protected by U.S. patents and other intellectual property rights.
Use of this copyright protection technology must be authorized
by Macrovision, and is intended for home and other limited
viewing uses only unless otherwise authorized by Macrovision.
Reverse engineering or disassembly is prohibited.
Please read this owner’s manual carefully before using the unit,
and keep it for future reference.
Cautions on Installation
Noise or disturbance of the picture may be generated if this unit or
any other electronic equipment using microprocessors is used
near a tuner or TV.
If this happens, take the following steps:
U. S. Patent No’s, 6,836,549; 6,381,747; 7,050,698;
6,516,132 and 5,583,936.
• Install this unit as far as possible from the tuner or TV.
• Set the antenna wires from the tuner or TV away from this unit’s
AC cord and input/output connection cords.
2
ENGLISH
ENGLISH
●BD-Live
Features
About Discs
BD-Live (BD-ROM version 2 Profile 2.0) that allows interactive
functions to be used when this unit is connected to the Internet
in addition to the BONUSVIEW function. The various functions
differ depending on the disc.
●PIP (Picture in Picture) (BONUSVIEW) Setting
Some BD-Video have the PIP (picture-in-picture) function which
enables you to display the secondary video in the primary video.
You can call up the secondary video by pressing [MODE]
whenever the scene contains the secondary video.
●Pure Direct
The sound quality of analog audio output is improved by stop
output of video signals, etc.
●On-Screen Display
Information about the current operation can be displayed on a
screen, allowing you to confirm the currently active functions
(such as program playback) using the remote control.
●Picture Control
Picture control adjusts the picture quality of the specific display.
●DRC (Dynamic Range Control)
Use this procedure to set the dynamic range of the output
signals when playing back BD/DVD/AVCHD recorded in Dolby
Digital/Dolby Digital Plus/Dolby TrueHD.
Disc Handling
• Handle the discs so that fingerprints and dust do not adhere to
the surfaces of the discs.
• Always store the disc in its protective case when it is not used.
• Note that discs with special shapes cannot be played on this
product. Do not attempt to play back such discs, as they may
damage the unit.
●x.v.Color
This unit supports playback of video contents on discs recorded
with “x.v.Color” technology. To watch this video content with the
“x.v.Color” space, a TV or other display device supporting both
video image reproduction using “x.v.Color” standard and
capability of manual switching of its color space setting is
required. Please refer to the owner’s manual of your display
device for further information.
Cleaning Discs
• When a disc becomes dirty, clean it with a cleaning cloth. Wipe
the disc from the center to out. Do not wipe in a circular motion.
• Do not use solvents such as benzine, thinner, commercially
available cleaners, detergent, abrasive cleaning agents or
antistatic spray intended for analog records.
Supplied Accessories
Please check to make sure the following items are included with
the main unit in the carton.
remote control (RC-1128)
AC cord (5.2ft/1.6m)
service station list
“AA” (R6) batteries x2
owner’s manual
warranty card
●Playing Back the Contents in SD Memory Card
• You can playback AVCHD, MP3, Windows Media™ Audio, or
JPEG stored in an SD Memory Card.
• You can store picture-in-picture commentary, subtitles or other
extras for BD-ROM ver. 2 (Profile 2.0/ Profile 1.1) files in an SD
Memory Card and playback with the BD-ROM.
●Playing Back AVCHD Files
This unit supports playback of AVCHD format files (new format
for high definition video camcorders) recorded on disc/SD card.
Your high definition personal archive is playable in HD quality.
●Playing Back DivX® File
You can enjoy DivX® files which are recorded on BD-RE/-R,
DVD-RW/-R or CD-RW/-R.
• Official DivX® Certified product
• Plays all versions of DivX® video (including DivX® 6/DivX® HD)
with standard playback of DivX® media files.
●Playing Back an MP3 File
You can enjoy MP3 files which are recorded on BD-RE/-R,
DVD-RW/-R, CD-RW/-R or SD Memory Card.
●Playing Back Windows Media™ Audio File
You can enjoy Windows Media™ Audio files which are recorded
on BD-RE/-R, DVD-RW/-R, CD-RW/-R or SD Memory Card.
●Displaying a JPEG picture
Kodak Picture CD can be played back. Still images stored in JPEG
format on BD-RE/-R, DVD-RW/-R, CD-RW/-R or SD Memory Card
can also be played back.
RCA audio cable (3.2ft/1.0m)
RCA video cable (3.2ft/1.0m)
●BD-J Application
• With some BD that supports Java applications (BD-J), you can
enjoy interactive function (e.g. game).
3
ENGLISH
ENGLISH
Playable files
Logos
Media
Readable cards
Playable files / data
Playable Discs and Files
DVD-RW/-R
SD Memory Card (8MB - 2GB) AVCHD, MP3, Windows Media™
This unit is compatible to play back the following discs.
To play back a BD or DVD, make sure that it meets the
requirements for region codes and color systems as described on
page 5. You can play back discs that have the following logos on
the disc. Other disc types are not guaranteed to play back.
SD Memory Card
(including SDHC)
miniSD Card
Audio, JPEG, Picture-in-picture
SDHC Memory Card (4GB - 8GB)
miniSD Card (8MB - 2GB)
AVCHD
commentary, subtitles or other
extras for BD-ROM ver. 2 (Profile
microSD Card
microSD Card (8MB - 2GB)
2.0/ Profile 1.1)
Playable discs
Blu-ray Disc
Logos
BD-RE/-R
DVD-RW/-R
CD-RW/-R
Note for SD Memory Cards
DivX®
MP3
- BD-Video
• Do not remove the SD Memory Card or turn the unit to the
standby mode while the contents of the card is in playback. It
may result in malfunction or loss of the card’s data.
• Please keep the SD Memory Cards in their cases when you are
not using them.
- BD-RE (ver.2.1)
(Recorded in BDMV format)
- BD-R (ver.1.1/1.2/1.3)
(Recorded in BDMV format)
(Unclosed discs may not be played back.)
—
—
BD-RE/-R
DVD-RW/-R
• Do not try to open or modify the card.
CD-RW/-R
Windows Media™
Audio
• Do not touch the terminal surface with your fingers or any
SD Memory Card
(including SDHC)
miniSD Card
microSD Card
DVD-Video
metals.
• Do not attach additional labels or stickers to cards.
• Do not remove the label of the SD Memory Cards.
• This unit supports SD Memory Card with FAT12/FAT16 file
system, and SDHC Memory Card with FAT32 file system.
• This unit may not read the SD Memory Cards formatted on
computer. If that is the case, please reformat the SD Memory
Cards on this unit and try again.
JPEG
DVD-RW
(Finalized discs only)
(Finalized discs only)
Note
DVD-R
DVD-R DL
• ABOUT DIVX VIDEO: DivX® is a digital video format created by
DivX, Inc. This is an official Divx Certified device that plays
software tools to convert your files into DivX video.
• This unit does not support mini SDHC and micro SDHC
Memory Card.
CD-DA (audio CD)
CD-RW
• For miniSD Card and microSD Card adapter is necessary.
• ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device
must be registered in order to play DivX Video-on-Demand
(VOD) content. To generate the registration code, locate the
DivX VOD section in the device setup menu. Go to
miniSD Card
microSD Card
Adapter
Adapter
miniSD Card
microSD Card
vod.divx.com with this code to complete the registration
process and learn more about DivX VOD.
CD-R
• Discs containing the DivX® files with the DivX® GMC (Global
Motion Compensation) playback feature, which is DivX®
supplemental function, cannot be played back on this unit.
• Portions of this product are protected under copyright law
and are provided under license by ARIS/SOLANA/4C.
Kodak Picture CD
• This unit cannot play back the disc contents protected by
Windows Media™ Digital Rights Management (DRM).
• “WMA” (Windows Media™ Audio) is an audio codec
developed by Microsoft® in the United States of America.
—
DTS-CD (5.1 Music Disc)
4
ENGLISH
ENGLISH
Unplayable Discs
Region Codes
Symbols Used in this Owner’s Manual
BD-Video
The following discs will not play back on this unit.
• BD-RE (ver. 1.0) (BD-disc with cartridge)
• BD-RE (ver. 2.1) (Recorded in BDAV format)
• BD-R (ver. 1.1/ 1.2/ 1.3) (Recorded in BDAV format)
• BD that contains AVCHD files
This unit has been designed to play back BD with
region A and DVD-Video with region 1. You cannot
play back BD or DVD-Video that are labeled for other
regions. Look for the symbols on the right on your BD
or DVD-Video. If these region symbols do not appear
on your BD or DVD-Video, you cannot play back the
disc in this unit. The letter or number inside the
globe refers to region of the world. A BD or
To specify for which media type each function is, we put the
following symbols at the beginning of each item to operate.
Symbol
Description
Description refers to BD-Video and BD-RE (ver. 2.1)/
BD-R (ver. 1.1/ 1.2/ 1.3) recorded in BDMV format
DVD-Video
BD-V
• Multi-session burn BD/DVD with DivX® files
Description refers to DVD-Video and DVD-RW/-R
recorded in video mode
• Multi-session burn BD-RE/-R with MP3/Windows Media™ Audio/
JPEG files
• BD/DVD hybrid disc (e.g. Total Hi Def hybrid disc)
• BD-Video that does not include “A” on its region code.
DVD-V
DVD-Video labeled for a specific region can only play
back on the unit with the same region code.
Description refers to DVD-RW/-R recorded in VR mode
Description refers to audio CD and DTS-CD
DVD-VR
CD
• DVD-Video that does not include either “1” nor “ALL” on its
region code.
Description refers to DVD-RW/-R and SD Card with
AVCHD files
• DVD-ROM/RAM (For DVD-ROM discs, data files in DivX® 3.11, 4.x,
5.x and 6.x can be played)
AVCHD
Structure of Disc/SD Memory Card Contents
Description refers to BD-RE/-R, DVD-RW/-R and
CD-RW/-R with DivX® files
The contents of disc are generally divided into titles. Titles may be
further subdivided into chapters.
• DVD-RW/-R recorded in non-compatible recording format
• CD-ROM (Data files in DivX® 3.11, 4.x, 5.x and 6.x can be played)
• CDV (Only the audio part can be played)
• CD-G (Only the audio signals can be output)
• Compact Disc-Interactive (CD-I)
• Video Single Disc (VSD)
• Video CD, Super Video CD
• Super audio CD (Only the sound on the CD layer can be heard.
The sound on the high-density super audio CD layer cannot be
heard.)
®
DivX
BD/DVD/AVCHD
Description refers to BD-RE/-R, DVD-RW/-R, CD-RW/-R
and SD Memory Card with MP3 files
Description refers to BD-RE/-R, DVD-RW/-R, CD-RW/-R
and SD Memory Card with Windows Media™ Audio
files
title 1
title 2
MP3
WMA
JPEG
chapter 1 chapter 2 chapter 1 chapter 2 chapter 3
Description refers to BD-RE/-R, DVD-RW/-R, CD-RW/-R
and SD Memory Card with JPEG files
Audio CDs are divided into tracks.
Audio CD
track 3
• DVD-Audio
• HD DVD
track 1
track 2
track 4
track 5
If you do not find any of the symbols listed above under the
function heading, the operation is applicable to all media.
• Disc with recording area less than 55mm in diameter
• Unauthorized disc (Pirated disc)
• Unfinalized disc
Data discs or SD Memory Cards containing DivX® (in discs only)/
MP3/Windows Media™ Audio/JPEG are divided into folders, and
the folders are subdivided into files.
About the button names in this explanation
< > : Buttons on the main unit
[ ] : Buttons on the remote control
Button name only:
Color Systems
DivX®/MP3/Windows Media™ Audio/JPEG
folder (group) 1
folder (group) 2
BD and DVD are recorded in different color systems throughout
the world. The most common color system is NTSC (which is used
primarily in the United States and Canada).
Buttons on the main unit and remote control
file (track) 1 file (track) 2 file (track) 3 file (track) 4 file (track) 5
This unit uses NTSC, so BD or DVD you play back must be recorded
in the NTSC system. You cannot play back BD or DVD recorded in
other color systems.
5
ENGLISH
ENGLISH
About the Remote Control
Using a Remote Control
Changing the Signal Code of a Remote Control
Keep in mind the following when using the remote control:
To avoid the other DENON’s BD players responding the remote
signal of this unit, you can change the signal code of the remote
control. If the signal code of the remote control does not match to
the signal code of the unit, you cannot control the unit with the
remote control.
Loading the Batteries
• Make sure that there are no obstacles between the remote
control and infrared sensor window on the unit.
• Remote operation may become unreliable if strong sunlight or
fluorescent light is shining on infrared sensor window of the
unit.
A Open the battery
B Insert two “AA” (R6)
batteries, with each one
oriented correctly.
compartment cover.
• Remote control for different devices can interfere with each
other. Avoid using remote control for other equipment located
close to the unit.
ⅥChange the signal code of the unit
1) In stop mode, press [SETUP].
• Replace the batteries when you notice a fall off in the operating
2) Use [Y / Z] to select
, then press [ENTER].
range of the remote control.
• The maximum operable ranges from the unit are as follows.
3) Use [Y / Z] to select
, then press [ENTER].
- Line of sight:
approx. 23 feet (7m)
4) Use [U / V] to select “Remote Control Setting”.
5) Press [ENTER] to select “DENON1” or “DENON2”.
- Either side of the center: approx. 23 feet (7m) within 30°
C Close the cover.
ON / STANDBY
SD CARD
Others
Cautions on Batteries
30°
30°
Remote Control Setting DENON1
HDMI CEC
Media Select
Network Connection
Network Update
• Use “AA” (R6) batteries in this remote control.
• Replace the batteries with new ones approximately once a
year, though this depends on the frequency with which the
remote control is used.
On
Disc
Enable(Easy)
23 feet (7m) 30°
23 feet (7m)
23 feet (7m) 30°
Setting this Unit not React to Other DENON’s DVD
Player’s Remote Control
• If the remote control does not operate within a close
proximity of the main unit, replace the batteries with new
ones, even if less than a year has passed.
• The included batteries serve only for verifying operation.
Replace them with new batteries as soon as possible.
• When inserting the batteries, be careful to do so in the
proper direction, following the and marks in the remote
control’s battery compartment.
• To prevent damage or battery fluid leakage:
- Do not mix a new battery with an old one.
- Do not mix two different types of batteries such as alkaline
and manganese.
- Do not short-circuit, disassemble, heat or dispose of
batteries in flames.
• Remove the batteries when not planning to use the remote
control for a long period of time.
• If the batteries should leak, carefully wipe off the fluid from
the inside of the battery compartment, then insert new
batteries.
6) Press [SETUP] to exit.
• At this point the new signal code of the unit is effective. Please
change the signal code of the remote control to match to the
signal code of the unit with following procedure.
If you have other DENON’s DVD players around this unit, this unit
reacts to the commands you made for DVD players through its
remote control. To avoid this situation, you can set this unit not
react to other DENON’s DVD player's remote control.
ⅥChange the signal code of the remote control
1) In stop mode, press [SETUP].
2) Press [7],[8],[9],[2].
Set to “DENON1”:
Press and hold [RETURN], and press [3], [2], [1].
3) Press [SETUP].
Set to “DENON2”:
• “Only Attached Remocon” will be displayed on the upper
right corner of the screen and this unit only react to the
commands from this unit's remote control.
Press and hold [RETURN], and press [1], [2], [3].
• If the signal code does not match, the signal code of the main
unit will be displayed on the front panel display.
• The default setting and the setting after you change the
batteries is “DENON1”.
• If the code setting on the unit is “DENON1”, and the setting on
the remote control is “DENON2”, “PLAYER 1” is shown on the
front panel display.
Remocon” will be displayed on the upper right corner of the
screen and this unit react to both the commands from this unit's
remote control and the other DENON’s DVD players' remote
control.
Note
• The setting remains after you turn the unit to the standby
mode or unplug the AC cord.
• If you try to operate this unit with the other DENON’s DVD
players' remote control, some of the operation may not be
available depending on the manufactured year or type of the
remote control.
6
ENGLISH
ENGLISH
Part Names and Functions
Front Panel
Rear Panel
1
2
3
4
5
6
10 1112 13
9
AC IN
COAXIAL
ROOM TO ROOM
DIGITAL OUT
PCM BITSTREAM
COMPONENT VIDEO OUT
VIDEO OUT
(
/
)
REMOTE CONTROL
ON / STANDBY
2ch AUDIO OUT
L
R
SD CARD
ETHERNET
HDMI OUT
7
8
3
4
5 6 7
8
1
2
The unit can also be turned on by pressing the buttons with circled numbers.
1. Power indicator
8. h / g (FAST FORWARD/REVERSE)
1. AC Inlet (AC IN)
7. ETHERNET Terminal
button
This indicator lights up in green when the
power is on, and lights up in red in standby
mode.
Use to connect the AC cord to supply the
power.
Use to connect a telecommunications
Press to search forward / backward through
equipment with LAN cable.
a disc.
2. DIGITAL OUT (COAXIAL) jack
Use digital audio coaxial cable to connect to
an AV receiver, Dolby Digital decoder or
other device with a digital audio coaxial
input jack.
3. COMPONENT VIDEO OUT jacks
Use a component video cable to connect to
a display device with component input jacks.
4. VIDEO OUT jack
8. HDMI OUT jack
2. ON/STANDBY button
9. Disc tray
Use an HDMI cable to connect to a display
with an HDMI input jack.
Press to turn on the unit, or to turn the unit
to the standby mode. (In standby mode, this
unit still consumes small amount of power.
To completely shut down the unit, you must
unplug the AC cord.)
Place a disc when opening the disc tray.
10. A (OPEN/CLOSE) button
Press to open or close the disc tray.
11. B (PLAY) button
Press to start or resume playback.
12. C (STOP) button
Press to stop playback.
13. H / G (SKIP DOWN/UP) button
Note
• Do not touch the inner pins of the jacks on
the rear panel. Electrostatic discharge may
cause permanent damage to the unit.
3. Infrared sensor window
Receives signals from your remote control so
that you can control the unit from a distance.
4. Display
5. SD CARD slot
Use an RCA video cable to connect to a TV
monitor, AV receiver or other device.
5. REMOTE CONTROL IN / OUT jacks
Connecting the DENON Satellite Remote
Control to these jacks enables you to
operate more than one DENON components
with one remote control.
Press to skip down/up titles/chapters/tracks/
files.
Insert an SD Memory Card, and play back the
contents in it.
6. HDMI RESOLUTION button
Press to set the HDMI jack’s video signal
6. 2ch AUDIO OUT jacks
output mode.
Use an RCA audio cable to connect these
jacks to the 2-channel audio input jacks of
your amplifier with 2- channel input
terminals.
7. F (STILL/PAUSE) button
Press to pause playback.
7
ENGLISH
ENGLISH
Remote Control
1. POWER ON button
20. REW h button
• Press to turn the unit on.
• During playback, press to fast reverse the playback.
21. STILL/PAUSE F button
2. POWER OFF button
• Press to turn the unit to standby mode.
3. A-B REPEAT button
• Press to mark a segment between A and B for A-B repeat
playback.
4. REPEAT button
• Press to select the repeat mode.
5. RANDOM button
• Press to display the random playback screen for shuffling the
playback order of tracks/files.
6. ZOOM button
• During playback, press to enlarge the picture on the screen.
7. CLEAR button
31
29
• Press to pause playback.
• When playback is in pause, press repeatedly to forward the
playback step by step.
30
28
1
2
22. FFW g button
3
• During playback, press to fast forward the playback.
• When playback is in pause, press to slow forward the playback.
23. PLAY B button
4
• Press to start playback or resume playback.
24. MODE button
5
• During playback, press to display the picture adjustment
menu, and dialog speed.
6
7
• During the JPEG playback, press to display menus for
changing the visual effect for switching the image or
changing the size of the image.
8
• Press to clear the information once entered, to clear the
marker settings, or to cancel the programming for CD, etc.
8. RED/GRN/BLU/YEL button
• Press to select item on some BD menus.
• When file list / thumbnail list is shown, press to switch
between pages.
27
25
9
• In stop mode with BD inserted, press to display a menu for
setting the BD audio mode.
10
• During playback of BD, DVD, audio CD, AVCHD, DivX®, MP3
or Windows Media™ Audio, press to display a menu for
setting the virtual surround.
11
12
9. TOP MENU button
• During BD playback, press to turn the picture-in-picture
feature on or off (only applicable to BD-Video which
supports the PIP (BONUSVIEW) function).
• In stop mode with audio CD, or disc with MP3, Windows
Media™ Audio, JPEG files inserted, press to display menus for
program and random playback.
• Press to display the top menu.
10. Cursor U / V / Y / Z buttons
• Press to select items or settings.
11. ENTER button
26
24
13
14
• Press to confirm or select menu items.
12. SETUP button
15
16
25. AUDIO button
• Press to display the setup menu.
13. SUBTITLE button
• Press to display the subtitle menu.
14. ANGLE button
• Press to display the audio menu.
26. RETURN button
• Press to return to the previously displayed menu screen.
27. POP UP MENU / MENU button
17
18
19
20
23
21
• Press to access various camera angles on the disc.
• Press to rotate the JPEG/Kodak Picture images clockwise by
90 degrees.
• Press to display the pop-up menu/disc menu/file list.
• Press to change “Original” and “Playlist” on the TV screen.
28. SEARCH MODE button
22
15. PURE DIRECT button
• Press to display the search menu.
29. Number buttons
• Press to stop output of video signals, etc., and output only
the analog audio signals to achieve high quality sound from
analog audio outputs.
• Press to enter the title/chapter/track/file numbers.
30. OPEN/CLOSE A button
16. DISPLAY button
• Press to display the On-Screen display menu.
17. SKIP H button
• Press to open or close the disc tray.
31. DIMMER button
• Press to adjust the brightness of the front panel display.
• During playback, press to return to the beginning of the
current title, chapter, track or file.
18. SKIP G button
Note
• During playback, press to skip the next chapter, track or file.
19. STOP C button
• [ZOOM] is not available for BD and AVCHD.
• [RANDOM] is not available for BD, DVD, AVCHD and DivX®.
The unit can also be turned on by pressing the buttons with
circled numbers.
• Press to stop playback.
• Press to exit from the title menu.
8
ENGLISH
ENGLISH
Front Panel Display
Examples of Displays during Operation
Display
Description
1
2
Power on
Standby mode
Tray open
Tray is closing
Loading the disc
No disc inserted
* Brightness of the display can be adjusted. Refer to “Panel Display” in “Function Setup” on page 36.
1) Displays playback status icon. Refer to the table below.
This unit cannot read the disc or SD Memory Card inserted.
Stop mode
2) Displays various kinds of information such as title number, elapsed time, repeat mode, etc.
Playback status icon
Mode
HDMI output mode (480i) is selected.
HDMI output mode (480p) is selected.
HDMI output mode (720p) is selected.
HDMI output mode (1080i) is selected.
HDMI output mode (1080p) is selected.
HDMI output mode (1080p24 frame) is selected.
HDMI output mode (Source Direct) is selected.
Pure direct mode is set to pure direct off.
Disc
SD Memory Card
Playback is in progress
Stop mode
Pause mode
Fast forward mode
Fast reverse mode
Pure direct mode is set to video signal off.
Pure direct mode is set to front panel display off.
Slow forward mode
(for AVCHD only)
Pure direct mode is set to video signal and front panel display off.
Appears when the connected display device or other device does
not support HDCP.
Appears while repeat function is set
Note
Adjusting the Brightness of the Display
• When playing back the disc that contains more than 100 titles, display of the chapter and time
on the front panel display will be moved a few dots to the right.
You can adjust the brightness of the display by the pressing [DIMMER] repeatedly. The brightness
changes as bright A dimmer A auto each time you press [DIMMER]. If you select auto, the display
gets dimmer during playback.
Note
• [DIMMER] is not available when the setup menu is displayed.
9
ENGLISH
ENGLISH
Connections
Connect the DBP-1610 as follows before using. Make connections according to the equipment you are connecting.
Some DBP-1610 settings may be necessary depending on the connection method. Check each connection item for more information.
Home theater playback
Playing back with a direct connection to a TV
Using BD-Live function or updating the software
version of DBP-1610
1- Playing back using multi-channel system
2
4
DBP-1610
O
N
/
S
T
A
N
D
B
Y
SD
CARD
Audio + Video
DBP-1610
O
N
/
S
T
A
N
D
B
Y
S
D
CARD
DBP-1610
O
N
/
S
T
A
N
D
B
Y
SD
CARD
or
• LAN connection
Audio
Video
Multi-channel Audio + Video
: page 15
(VIDEO OUT/COMPONENT VIDEO OUT)
• HDMI connection
or
Playing back 2-channel audio
Multi-channel Audio
3
• Digital audio connection
DBP-1610
O
N
/
S
T
A
N
D
B
Y
SD
CARD
Video
(VIDEO OUT/COMPONENT VIDEO OUT)
• 2ch audio connection
10
ENGLISH
ENGLISH
Connecting to a TV
Connecting to a Display Device with HDMI Cable
Connecting this unit to device with an HDMI jack using an HDMI cable enables digital transfer of both
digital video signals and multi-channel audio signals.
Make one of the following connections, depending on the capabilities of your existing device.
After making the connection, please make HDMI settings on setup menu according to your display
Method 1
standard picture
Method 2
better picture
this unit
analog audio
display device
Method 3
AC IN
COAXIAL
best audio and picture
DIGITAL OUT
COMPONENT VIDEO
(
PCM
/
BITSTREAM
)
COMPONENT
VIDEO IN
AUDIO IN
VIDEO
IN
R
L
ETHERNET
HDMI OUT
Y
display device
(Green)
A display device
PB/CB
with an HDMI
(Blue)
compatible port
PR/CR
(Red)
To HDMI Input jack
RCA
audio
cable
RCA video
cable
component
video cable
HDMI cable
and
or
Cables not included.
Please purchase the necessary cables at your local store.
Use a cable on which the HDMI logo is indicated (a certified HDMI product) for connection to the
HDMI connector.
this unit
(Red)
(Blue)
(Green)
OOMTO ROOM
2ch AUDIO OUT
L
R
MOTE CONTROL
VIDEO OUT
2ch AUDIO OUT
L
R
Normal playback may not be possible when using a cable other than one on which the HDMI logo
is indicated (a non-HDMI-certified product).
COMPONENT VIDEO OUT
COMPONENT VIDEO OUT
2ch AUDIO OUT
VIDEO OUT
Connecting to a Display Device and an Amplifier/Receiver with HDMI Cable
Connecting this unit to display device and an amplifier/receiver with an HDMI jack using HDMI cables
enables digital surround sound with high quality video.
Supplied cables used in this connection are as follows:
• RCA audio cable (L/R) x 1
Front Speaker (left)
Front Speaker (right)
Center
Speaker
• RCA video cable x 1
Please purchase the rest of the necessary cables at your local store.
this unit
amplifier
display device
Note
AC IN
COAXIAL
HDMI IN
DIGITAL OUT
COMPONENT VIDEO
(
PCM
/
BITSTREAM
)
HDMI IN
HDMI OUT
• Connect this unit directly to the TV. If the RCA audio/video cables are connected to a VCR,
pictures may be distorted due to the copy protection system.
ETHERNET
HDMI OUT
• If the display device to which the player is to be connected is compatible with progressive scan
video, connect to the component video input.
• This unit’s COMPONENT VIDEO OUT jacks are compatible for 480i/480p/720p/1080i video
resolution. If the connected display device is not compatible for 480p/720p/1080i video
resolution, set “Component Output” to “480i”.
• If the picture is not output properly to the display device because of the “HDMI Video
Resolution” or “Component Output” setting, press and hold B on the front panel for more than
5 seconds. The “HDMI Video Resolution” setting will be reset to the default automatically.
• If you are using HDMI connection and set “HDMI Video Resolution” to “Source Direct”, “1080p” or
“1080p24”, picture may not be output properly to the display device. In that case, set “HDMI
Video Resolution” to “480i”, “480p”, “720p” or “1080i”.
HDMI cable
HDMI cable
Subwoofer
Surround
back (For
Surround
back (For
7.1-channel) 7.1-channel)
(left)
(right)
Surround Speaker (left)
Surround Speaker (right)
Cables not included.
Please purchase the necessary cables at your local store.
11
ENGLISH
ENGLISH
HDMI Output Mode and Actual Output Signals
Audio Setting
Press <HDMI RESOLUTION> to select the HDMI output mode. HDMI video resolution changes as
following.
When using HDMI connections make the “HDMI Audio Out” settings in the “Audio” menu on the
setup menu according to the specifications of the device or monitor to be connected.
Front Panel Display
HDMI Video Resolution
480 Interlaced
Device to be connected
“HDMI Audio Out” setting
HDMI Multi(Normal)
Output HDMI audio signal
Device compatible with DTS,
DTS-HD, Dolby Digital, Dolby
Digital Plus or Dolby TrueHD
decoding
Dolby Digital, Dolby Digital Plus,
Dolby TrueHD, DTS, or DTS-HD
bitstream are output from HDMI
OUT. Make the speaker settings on
the connected AV amplifier, etc.
Multi-channel audio signals are
output from the HDMI OUT. Make
the speaker settings with the
speaker setting items appear after
you select “HDMI Multi(LPCM)”.
Down-mixed 2-channel audio
signals are output from HDMI
OUT.
Press <HDMI RESOLUTION>
480 Progressive
Press <HDMI RESOLUTION>
720 Progressive
Press <HDMI RESOLUTION>
1080 Interlaced
Press <HDMI RESOLUTION>
1080 Progressive
Press <HDMI RESOLUTION>
1080 Progressive 24 frame
Press <HDMI RESOLUTION>
Source Direct
Press <HDMI RESOLUTION>
Device compatible with 3 or
more channels of audio inputs
(not DTS, DTS-HD, Dolby Digital,
Dolby Digital Plus or Dolby
TrueHD compatible)
HDMI Multi(LPCM)
Device compatible with
2-channel audio input or device
not compatible with audio input
HDMI connection to a display
device, and digital audio
connection (coaxial) to an AV
amplifier.
HDMI 2ch
Audio Mute
HDMI audio will be muted, and
Dolby Digital/DTS bitstream or
PCM will be output from DIGITAL
OUT depending on the “Digital
Out” setting. Refer to page 13.
ⅥAudio signals output from HDMI OUT
Disc type Audio recording
format
“HDMI Audio Out” setting
HDMI Multi(Normal) HDMI Multi(LPCM)
Note
HDMI 2ch
• You can change the HDMI output mode with <HDMI RESOLUTION> during playback as well.
(This is not available during BD/AVCHD playback.)
Dolby Digital
Dolby Digital Plus
Dolby TrueHD
DTS
Dolby Digital
Dolby Digital Plus*1
Dolby TrueHD*2
DTS
DTS-HD*3
Multi PCM
Dolby Digital
DTS
Multi PCM
Multi PCM*4
Multi PCM*5
Multi PCM
Multi PCM*6
Multi PCM
Multi PCM
Multi PCM
2ch PCM
2ch Downmix PCM
2ch Downmix PCM*4
2ch Downmix PCM*5
2ch Downmix PCM
2ch Downmix PCM*6
2ch Downmix PCM
2ch Downmix PCM
2ch Downmix PCM
2ch PCM
• Video and audio signals may be distorted temporarily when switching to/from the HDMI output mode.
on the setup menu. Refer to page 31.
• In order to get natural and high quality film reproduction of 24-frame film material, use HDMI
cable (High Speed HDMI cable is recommended) and select “1080p24”, “Auto” or “Source Direct”
if the connected display device is compatible with 1080p24 frame input.
• For AVCHD and DivX®, 24-frame film material will be output as 60 frame, even if the connected
device is compatible with 1080p24 frame input and “HDMI Video Resolution” is set to “1080p24”,
“Auto” or “Source Direct”.
• When “HDMI Video Resolution” is set to “1080p”, “1080p24” or “Source Direct”, the “Component
Output” will be set to “480i” automatically.
• If the video is not properly from HDMI OUT jack after you set the “HDMI Video Resolution” setting,
change the HDMI video resolution to the compatible resolution by pressing
<HDMI RESOLUTION> or press and hold B on the front panel for more than 5 seconds to reset
the setting.
• “HDMI Deep Color” is available only when the display device is connected by HDMI cable and
supports HDMI Deep Color.
• For “Auto” in “HDMI Deep Color”, using the High Speed HDMI cable is recommended.
BD-Video
DTS-HD
PCM
Dolby Digital
DVD-Video DTS
PCM
DTS-CD
2ch PCM
DTS
Multi PCM
Multi PCM
Multi PCM
Multi PCM
2ch PCM
2ch Downmix PCM
2ch Downmix PCM
2ch Downmix PCM
2ch Downmix PCM
2ch PCM
Dolby Digital
PCM
Dolby Digital
MP3/ MP2
Dolby Digital
Multi PCM
Dolby Digital
2ch PCM
AVCHD
DivX®
audio CD/ MP3/ Windows
Media™ Audio
2ch PCM
2ch PCM
2ch PCM
12
ENGLISH
ENGLISH
When HDMI is not connected or the “Audio Mute” is selected in “HDMI Audio Out” setting, the audio
signals output from DIGITAL OUT changes depending on the “Digital Out” setting. Refer to the
following table.
To set “Digital Out”, press [SETUP], then select “Quick” A “HDMI Audio Out” A “Audio Mute” or
“Custom” A “Audio” A “HDMI Audio Out” A “Audio Mute”.
• If “BD Audio Mode” is set to “HD Audio Output” or the BD title does not have secondary or
interactive audio, the audio will be output as shown in the table.
• If the “BD Audio Mode” is set to “Mix Audio Output” and the BD title has secondary or interactive
audio, the audio will be output as follows:
*1 Dolby Digital or Multi PCM (Only the independent substream is decoded.)
*2 Dolby Digital or Multi PCM (Only the Dolby Digital substream is decoded.)
*3 DTS or Multi PCM (Only the core substream is decoded.)
Disc type
Audio recording format
“Digital Out” setting
Bitstream LPCM
Dolby Digital
*4 As shown in the table (Only the independent substream is decoded.)
*5 As shown in the table (Only the Dolby Digital substream is decoded.)
Dolby Digital
Dolby Digital Plus
Dolby TrueHD
DTS
2ch Downmix PCM
2ch Downmix PCM*1
2ch Downmix PCM*2
2ch Downmix PCM
2ch Downmix PCM*3
2ch Downmix PCM
2ch Downmix PCM
2ch Downmix PCM
2ch PCM
*6 As shown in the table (Only the core substream is decoded.)
Dolby Digital
Dolby Digital
DTS
• If the connected device is not compatible with the HDMI BITSTREAM, audio will be output as Multi
PCM or 2ch Downmix PCM depending on the capability of the connected device, even if you select
BD-Video
DTS-HD
DTS
Copyright protection system
PCM
Dolby Digital
DTS
2ch Downmix PCM
Dolby Digital
DTS
To play back the digital video images of a BD/DVD via an HDMI connection, it is necessary that both
the unit and the display device (or an AV amplifier) support a copyright protection system called
HDCP (high-bandwidth digital content protection system). HDCP is copy protection technology that
comprises data encryption and authentication of the connected AV device. This unit supports HDCP.
Please read the owner’s manual of your display device (or AV amplifier) for more information.
DVD-Video
PCM
2ch PCM
DTS-CD
AVCHD
DTS
2ch Downmix PCM
2ch Downmix PCM
2ch Downmix PCM
2ch Downmix PCM
2ch PCM
* HDMI: High-Definition Multimedia Interface
Dolby Digital
PCM
Dolby Digital
MP3/ MP2
Dolby Digital
2ch Downmix PCM
Dolby Digital
2ch PCM
Note
• When using HDCP-incompatible display device, the image will not be viewed properly.
• The audio signals from the HDMI jack (including the sampling frequency, the number of
channels and bit length) maybe limited by the device that is connected.
DivX®
audio CD/ MP3/ Windows Media™ Audio
2ch PCM
2ch PCM
• Among the monitors that support HDMI, some do not support audio output (e.g. projectors). In
connections with device such as this unit, audio signals are not output from the HDMI output jack.
• This table applies only when HDMI is not connected or the “Audio Mute” is selected in “HDMI Audio
Out” setting.
• If “BD Audio Mode” is set to “HD Audio Output” or the BD title does not have secondary or
interactive audio, the audio will be output as shown in the table.
• If the “BD Audio Mode” is set to “Mix Audio Output” and the BD title has secondary or interactive
audio, the audio will be output as follows:
Digital Connection to an AV Amplifier with Built-in Decoder
digital audio coaxial cable
*1 Only the independent substream is decoded.
*2 Only the Dolby Digital substream is decoded.
*3 Only the core substream is decoded.
audio
DIGITAL AUDIO INPUT
COAXIAL
COAXIAL
AC IN
COAXIAL
ROOM TO
Note
DIGITAL OUT
COMPONENT VIDEO OUT
VIDEO OUT
(
PCM
/
BITSTREAM
)
REMOTE C
DIGITAL OUT
• In order to output PCM signal from DIGITAL OUT jack while outputting the HDMI audio signal,
set “BD Audio Mode” to “Mix Audio Output” and set “HDMI Audio Out” to “HDMI Multi(LPCM)”.
ETHERNET
HDMI OUT
(
PCM
/
BITSTREAM
)
digital audio coaxial
input jack
this unit
Cables not included.
Please purchase the necessary cables at your local store.
ⅥAudio signals output from DIGITAL OUT (COAXIAL)
When both HDMI and DIGITAL OUT is connected to other devices, the audio signals currently output
from the HDMI OUT will be output from the DIGITAL OUT jack as well, except that HDMI 2ch signal
will be output from HDMI OUT jack, when connected device does not support Dolby Digital and DTS.
< When HDMI is not connected or “Audio Mute” is selected···>
13
ENGLISH
ENGLISH
Connection to a Device with 2-channels of Analog Audio Inputs
Network Connection with LAN
• You can use a disc which offers BD-Live function by connecting the unit to the Internet.
(For BD-Live information, please refer to page 28.)
RCA audio cable
audio
Stereo component
Telecommunications
equipment (modem, etc.)
AUDIO IN
L
this unit
2ch AUDIO OUT
R
L
AC IN
ROOM TO ROOM
T
UT
REMOTE CONTROL
R
Hub or broadband router
2ch AUDIO OUT
R
L
WAN
LAN
LAN
Supplied cables used in this connection are as follows:
• RCA audio cable (L/R) x 1
5
4
3
2
1
LAN cable
Note
LAN cable
• When connecting to a 2-channel audio stereo device, use the 2ch AUDIO OUT jacks. For software
recorded in multi-channel, analog signals that have been down-mixed into 2 channels are
output.
Internet
this unit
ETHERNET
ROOM TO ROOM
AC IN
COAXIAL
DIGITAL OUT
COMPONENT VIDEO OUT
VIDEO OUT
(
PCM
/
BITSTREAM
)
REMOTE CONTROL
2ch AUDIO OUT
L
R
ETHERNET
HDMI OUT
No supplied cables are used in this connection:
Please purchase the necessary cables at your local store.
Note
• After connecting to the Internet, set up necessary network settings.
• Do not insert any cable other than a LAN cable to the ETHERNET terminal to avoid damaging the
unit.
• If your telecommunications equipment (modem, etc.) does not have broadband router
functions, connect a broadband router.
• If your telecommunications equipment (modem, etc.) has broadband router functions but there
is no vacant port, use a hub.
• For a broadband router, use a router which supports 10BASE-T/100BASE-TX.
• Do not connect your PC directly to the ETHERNET terminal of this unit.
14
ENGLISH
ENGLISH
Connecting the AC cord
After you made all necessary connections, connect the AC cord to the AC IN. Then connect the AC
cord to the AC outlet.
AC outlet
AC IN
COAXIAL
AC 120V, 60 Hz
DIGITAL OUT
COMPONENT VIDEO OUT
(
PCM
/
BITSTREAM
)
AC cord
ETHERNET
HDMI OUT
Supplied cables used in this connection are as follows:
• AC cord x 1
Note
• Insert the plugs securely. Incomplete connections will result in the generation of noise.
15
ENGLISH
ENGLISH
Playback
[POWER OFF]
Direct Playback
Disc playback
BD-V
AVCHD
DVD-V DVD-VR
Turn on the power of this unit. (Refer to “Turning
[POWER ON]
A
: page 17
1
: page 25
: page 27
Turn on the display device and select the
appropriate input on the device to which the unit
is connected.
2
3
4
SD Card playback
Press A to open the disc tray.
[U / V / Y / Z]
: page 27
: page 17
[ENTER]
Place the disc on the disc tray with its label side
facing up.
NOTE
•
may appear at the top-right on the screen when the
operation is prohibited by the disc or this unit.
B
C
• During the playback of 2-layered disc, pictures may stop
for a moment. This happens when the 1st layer switches
to the 2nd layer. This is not a malfunction.
• The operation may vary when you play back with disc
menu. Refer to the manual accompanying the disc for
details.
Align the disc to the
disc tray guide.
Turning the Power On
Press [POWER ON] or <ON/STANDBY> to turn on the unit.
The power indicator lights green.
Press A to close the disc tray.
5
It may take a while to load
the disc.
ⅥTurning the unit to the standby mode
Press [POWER OFF] or <ON/STANDBY> to turn the unit to the
standby mode.
A B C
Some discs may start playback automatically.
The power indicator lights red.
Press B to start playback.
Menu screen may appear.
In this case, use [U / V / Y / Z] to select the desired
item, then press [ENTER].
6
7
Note
ON / STANDBY
SD CARD
• Power continues to be supplied to some of the circuitry even
when the power is in the standby mode. When leaving home
for long periods of time or when traveling, unplug the AC
cord from the AC outlet.
Press C once to stop playback temporarily.
To eject the disc:
Press A to open the disc tray, then remove the disc
before turning the unit to the standby mode.
<ON/STANDBY>
About the button names in this explanation
< > : Buttons on the main unit
[ ] : Buttons on the remote control
Button name only:
Buttons on the main unit and remote control
16
ENGLISH
ENGLISH
Pause
[POP UP MENU /
MENU]
Note
1) During playback, press F.
• If the feature is not available,
screen.
may appear on the TV
[TOP MENU]
[U / V / Y / Z]
Playback will be paused.
• Contents of menus and corresponding menu operations may
vary among discs. Refer to the manual accompanying the disc
for details.
F
[ENTER]
• BD/DVD/AVCHD menu varies depending on discs.
2) Press B to return to normal playback.
Playing Back a VR mode DVD-RW/-R
Note
C
B
• For BD, DVD and DivX®, set “Still Mode” to “Field” in the
“Video” menu if pictures in the pause mode are blurred (refer
to page 31).
DVD-VR
h
g
F
When you are playing back a VR mode DVD-RW/-R, you can
choose “Original” or “Playlist” if the disc contains a “Playlist”.
1) In stop mode, press [POP UP MENU / MENU] to call up the
DVD menu.
2) Use [Y / Z] to select “Original” or “Playlist”.
Operations Using Disc Menu, Title Menu, and Popup
Menu
Resume Playback
1) During playback, press C.
• Resume message will appear on the screen.
DVD-VR
BD-V DVD-V AVCHD
CH2 LP
Many of BD and DVD disc contains Disc menu (DVD), Title menu
(BD/DVD/AVCHD) or Pop-up menu (BD-Video) which describes
the contents of the disc, or a disc menu, which guides you through
the available functions in the disc. The contents of the menus may
differ depending on the discs.
Resume ON
Original
Playlist
Press 'PLAY' to play from here.
To play from the beginning,
press 'STOP' first and then 'PLAY'.
8. CH2 LP
9. CH2 LPS
10. JAN/ 1/09 12:13AM 35-16 SP
11. JAN/ 1/09 12:15AM 35-16 SP
12. JAN/ 1/09 12:03AM 35-16 SP
13. JAN/ 1/09 12:08AM 35-16 SP
14. JAN/ 1/09 12:12AM 35-16 SP
Title Info
∗∗:∗∗:∗∗
∗∗/∗∗/∗∗(∗∗∗)
∗∗:∗∗ ∗∗
Time
Date
Start
:
:
:
2/
2
<Example: BD>
Page Up
Page Down
Disc menu (DVD)
1) Press [POP UP MENU / MENU].
• The disc menu will appear.
2) Press B.
3) Use [U / V] to select desired title, then press B or [ENTER].
In a few seconds, playback will resume from the point at which
it stopped last. To cancel the resume playback and start
playing back the disc from the beginning, press C again while
the playback is stopped.
2) Use [U / V / Y / Z] to select an item, then press [ENTER].
Note
Title menu (BD/DVD/AVCHD)
1) Press [TOP MENU].
2) Use [U / V / Y / Z] to select an item, then press [ENTER].
• “Original” is the title which is actually recorded on the disc.
• Playlist is edited version of the Original.
• If the disc does not contain Playlist, Playlist will not be
displayed on the DVD menu.
Note
• For MP3, Windows Media™ Audio or JPEG, playback will
resume from the beginning of the current file.
• The resume information will be saved even when the power is
in standby mode.
Pop-up menu (BD-Video)
• This is a special feature available for some BD. When you
press [POP UP MENU / MENU], a menu pops out on the
screen while the contents still play back.
• If you open the disc tray or press C again in stop mode, the
resume information will be cleared.
• Resume playback may not be available for the BD that
supports Java applications (BD-J).
1) During BD playback, press [POP UP MENU / MENU].
2) Use [U / V / Y / Z] to select an item, then press [ENTER].
• In the “SD Card” mode, the resume information will be
cleared when:
- the SD Memory Card is removed.
- the unit is turned to the standby mode.
17
ENGLISH
ENGLISH
Fast Forward / Fast Reverse Playback
Step by Step Playback
Dialog Speed
®
DivX
®
BD-V DVD-V DVD-VR CD AVCHD
DivX
BD-V DVD-V DVD-VR AVCHD
AVCHD
DVD-V DVD-VR
BD-V
1) During playback, press F.
This function plays back approximately at 1.3 times of normal
playback while keeping the sound output. This function is
available only on discs recorded in the Dolby Digital format.
MP3
WMA
• Playback will pause and sound will be muted. The disc
advances frame by frame each time F is pressed.
1) During playback, press h or g repeatedly to select a
desired forward or reverse speed.
h Button
1) During playback, press [MODE] repeatedly until the dialog
speed setting appears.
F
1
2
2
3
3
4
4
5
5
g Button
Off
1
2) Press B to return to normal playback.
2) Press [ENTER] or [Y / Z] to switch
(x1.3), or off.
2) Press B to return to normal playback.
Note
“Off” : Plays back in normal speed.
• For BD, DVD and AVCHD, speed changes in 5 different levels.
For audio CD, DivX®, MP3 and Windows Media™ Audio,
speed changes in 3 different levels.
• For audio CD, MP3 and Windows Media™ Audio, sound will
be output at any speed of fast forward and reverse search.
• Set “Still Mode” to “Field” in the “Video” menu if pictures in
the pause mode are blurred (refer to page 31).
• Only step by step forward is available.
: Plays back approximately at 1.3 times of normal
playback.
“
”
3) Press B to return to normal playback.
Note
Note
• Every time you press
C, the setting will be turned “Off”.
[A-B REPEAT]
[REPEAT]
• For MP3 and Windows Media™ Audio, fast forward/fast
reverse search between different files are not available.
• For audio CD, fast forward/fast reverse search between
different tracks are not available during the program and
random playback.
• Subtitle can be viewed during this function.
• Picture adjustment, and audio language setting cannot be
changed during this function.
• Virtual surround does not function during this function.
• This function may not work at some points on a disc.
• During this function, Multi/2ch PCM will be output from
HDMI output, 2ch PCM will be output from digital audio
output, or 2ch analog sound will be output from analog
audio out.
[RANDOM]
[BLU]
• For some DivX® files, fast forward/fast reverse search may not
function.
[CLEAR]
[YEL]
[U / V / Y / Z]
Slow Forward Playback
[ENTER]
[RETURN]
®
DivX
BD-V DVD-V DVD-VR AVCHD
1) During playback, press F.
2) Press g.
[MODE]
• Slow motion playback will begin and sound will be muted.
3) Press g repeatedly to select a desired speed.
• Slow forward speed changes in 3 different levels.
g Button
C
B
1
2
3
4) Press B to return to normal playback.
Note
• Set “Still Mode” to “Field” in the “Video” menu if pictures in
• Slow reverse is not available.
18
ENGLISH
ENGLISH
3) Press B to start program playback.
Repeat Playback
Available repeat function may vary depending on the discs.
• Program playback will start.
Note
• The chapter/title/track/group repeat setting will be cleared
when moving to other chapter, title, track/file or folder.
• Repeat playback does not function during A-B repeat
playback.
Note
1) During playback, press [REPEAT] repeatedly until desired
repeat mode appears on the screen.
• During the program playback, press C once to set the resume
point, and then press B to resume the program playback
from where C was pressed (audio CD) or from beginning of
the file where C was pressed (MP3, Windows Media™ Audio,
or JPEG).
twice to display the
program screen. To go back to the normal program playback,
The following repeat modes are available.
• Repeat chapter/title is not available with some scenes.
• A-B Repeat can only be set within the current title or current
track/file.
Repeat mode
Chapter repeat
Available media
BD-V DVD-V DVD-VR
AVCHD
• During the program playback, press
C
• A-B Repeat is not available with some scenes.
• To cancel the A point which was set, press [CLEAR].
• A-B Repeat playback does not function during chapter, title,
track, group or all repeat playback.
The current chapter will be
played back repeatedly.
press [RETURN] to exit from the program screen, then press
• Your program is still stored until either the disc tray is open or
power is turned to the standby mode.
B.
Title repeat
BD-V DVD-V DVD-VR
AVCHD
• For some DivX® files, A-B Repeat playback may not function.
The current title will be
played back repeatedly.
• Up to 99 tracks/files can be entered.
• To repeat the current track/file in the program, press
[REPEAT] repeatedly until “
back. To repeat the entire program press [REPEAT]
repeatedly until “ All” appears during playback.
Track repeat
Program Playback
®
CD
DivX
MP3
Track” appears during play
The current track or file will
be played back repeatedly.
CD
MP3
WMA JPEG
WMA JPEG
You can program the disc to play back in your desired order.
Group repeat
• Even if an inserted disc contains mixed MP3 and Windows
Media™ Audio files, program function allows 99 files in
combination of MP3 and Windows Media™ Audio files.
• The total number of selected tracks for the program playback
will be displayed in the front panel display.
• Playback from a desired track/ file and random playback are
not available during program playback.
®
DivX
MP3 WMA
1) In stop mode, press [MODE].
• The program screen will appear.
2) Use [U / V] to select a track/file, then press [ENTER].
The current folder will be
played back repeatedly.
JPEG
All repeat
- / 7
®
DivX
DVD-VR
CD
All titles, tracks or files in
the media will be played
back repeatedly.
Program
MP3
MP3 WMA JPEG
MP3_1
MP3_2
MP3_3
MP3_4
MP3_5
MP3_6
MP3_7
A-B Repeat
PIP (Picture in Picture) (BONUSVIEW) Setting
1/
2
1/
1
Page Down
BD-V
®
BD-V DVD-V DVD-VR CD AVCHD
DivX
Some BD-Video have the PIP (picture-in-picture) function which
Desired section can be played back repeatedly.
<Example : MP3>
enables you to display the secondary video in the primary video.
You can call up the secondary video by pressing [MODE]
repeatedly whenever the scene contains the secondary video.
1) Press [A-B REPEAT] at the desired starting point A.
2) Press [A-B REPEAT] at the desired ending point B.
• The repeat sequence begins.
• For MP3, Windows Media™ Audio, and JPEG, use [U / V] to
select a folder, then press [ENTER] first, and then use
[U / V] to select a track/file, then press [ENTER].
• Press [CLEAR] to erase the last track/file of the program.
• Select “All Clear” at the bottom of the list to erase all the
tracks/files in the program.
3) Press [A-B REPEAT] to exit the sequence.
• The programmed track/file is displayed in the right hand
screen.
primary video
• If the entire program cannot be displayed on the screen, “L”
or “K” appears.
• Use [Y / Z] to go back forward between the hierarchy of
folders.
secondary video
• If eight or more tracks/files were set in a program, use [BLU]/
[YEL] to see all the tracks/files.
19
ENGLISH
ENGLISH
1) During playback, press [MODE] repeatedly until the PIP
Zoom
setting appears.
• PIP information will appear.
2) Use [U / V] to select the secondary video you want.
• The secondary video will be displayed and the secondary
audio will be output.
Note
• During the random playback, press C once to set the resume
point, and then press B to resume the random playback from
where C was pressed (audio CD) or from beginning of the file
where C was pressed (MP3, Windows Media™ Audio, or
JPEG).
®
DVD-V DVD-VR
JPEG
DivX
This function allows you to enlarge the video image and to pan
through the zoomed image.
3) Press [RETURN] or [MODE] to remove the PIP information.
1) Press [ZOOM] during playback.
• Playback will continue.
• During the random playback, press C twice to display the
random playback screen. To cancel the random playback,
press [RANDOM] when the random playback screen is
displayed.
• To repeat the current track/file in the random selection, press
[REPEAT] repeatedly until “
Note
2) Press [ZOOM] repeatedly to select a desired zoom factor:
x1.2, x1.5, x2.0, x4.0 or off.
• The secondary audio will not be output when the secondary
audio is set to “Off” or when “BD Audio Mode” is set to “HD
Audio Output”. Refer to “Setting the BD Audio Mode” on
• “x4.0” zoom is not available for DivX® and JPEG.
x1.2
x1.5
x2.0
Track” appears during
playback. To repeat the entire random selection press
[REPEAT] repeatedly until “
All” appears during
Random Playback
x4.0
playback.
CD
MP3
WMA JPEG
• You cannot go back to the previous track/file during random
playback.
This function shuffles the play back order of tracks/files.
3) Use [U / V / Y / Z] to move the zoomed picture across the
• For a disc containing mixed MP3 and Windows Media™ Audio
files, random playback of those files will be performed.
1) In stop mode, press [RANDOM].
screen.
- - / 14
Total
Random
CD-DA
0 : 59 : 28
1
2
3
4
5
6
7
3 : 40
5 : 38
3 : 06
4 : 38
3 : 28
3 : 12
5 : 09
[the Number buttons]
[ZOOM]
[CLEAR]
[SEARCH MODE]
1/
2
Page Down
[U / V / Y / Z]
<Example: audio CD>
2) Press B to start random playback.
[ENTER]
[RETURN]
4) Press [ZOOM] repeatedly to exit zoom mode.
[ANGLE]
G
H
20
ENGLISH
ENGLISH
ⅥUsing [SEARCH MODE]
By using the [SEARCH MODE], you can select following search
options.
ⅥMarker search
This feature allows you to assign a specific point on a title or track
to be called back later.
Note
• For BD and AVCHD, zoom function is not available.
• Zoom function does not work while disc menu is shown.
• Navigation screen is not available on JPEG.
• You cannot pan through the zoomed picture on some JPEG
files.
Search mode
Available media
1) During playback, press [SEARCH MODE] repeatedly until
marker setting appears.
2) Use [Y / Z] to select a marker number (1-9).
/
BD-V DVD-V DVD-VR
AVCHD
Title / Chapter search
• For some DVD, “x4.0” zoom is not available.
• For DivX® files with small image, zoom function is not
available.
: :
--- -- -- --
Track Search
®
CD DivX
MP3
• For DivX®, depending on the size of the image, some zoom
factor may not be available.
3) When the disc reaches the point you want to set a marker,
press [ENTER].
WMA JPEG
• For DivX®, when changing the zoom factor or moving the
zoom position, the screen may become black for a moment.
This is not a malfunction.
• The title or track and elapsed playback time will appear on
the screen.
Time Search
BD-V DVD-V DVD-VR
®
4) Press [SEARCH MODE] or [RETURN] to exit.
5) To return to the marker later, call the marker setting by
pressing [SEARCH MODE] repeatedly during playback or in
stop mode, and use [Y / Z] to choose a desired marker,
then press [ENTER].
CD AVCHD DivX
Marker Search
BD-V DVD-V DVD-VR
AVCHD
Camera Angle
BD-V DVD-V
1) Select a type of search by pressing [SEARCH MODE].
• Every time you press [SEARCH MODE], type of search
changes.
2) Enter the desired chapter, track, file, title number or time
to search for using [the Number buttons].
• Chapter, title, track or time search will start.
e.g.
Some BD and DVD contain scenes which have been shot
simultaneously from various angles. You can change the camera
Note
• Opening the disc tray, turning the unit to the standby mode
markers.
angle when
appears on the screen.
1) Press [ANGLE] during playback.
• The selected angle will be displayed on the display bar at the
top of the screen.
• To clear a marker, use [Y / Z] to select the marker number to
be cleared and press [CLEAR].
• You can mark up to 9 points.
• For BD-Video and AVCHD, marker search between different
titles is not available.
• For BD and AVCHD, you can return to the maker only during
playback.
• For the disc with less than 10 titles, press the title number
directly.
• For discs with 10 or more but less than 100 titles, to play back
a single-digit title, press [0] first, then the title number (e.g.
for title 3, press [0], [3]). To play back a double-digit title,
press the title number.
2) Use [U / V] to select your desired angle.
Note
• If the “Angle Icon” setting is “Off” in the “Others” menu,
will not appear. Refer to page 36.
• For discs with 100 or more titles, to play back a single or a
double-digit title, press [0] first, then the title number (e.g.
for title 3, press [0], [0], [3] and for title 26, press [0], [2], [6]).
To play back a triple-digit title, press the title number.
Search
ⅥUsing H / G
1) Press G to skip to the next chapter, track or file during
Note
playback.
• During program and random playback, search functions are
not available except the search using H / G.
• Time search function is available only in the same track, file or
title.
To go back to the previous chapter, track or file, press H
twice in quick successions.
Note
• If title contains no chapters, H / G changes the title.
• For some DivX® files, time search may not function.
• For BD and AVCHD, chapter and time search are available
only during playback.
21
ENGLISH
ENGLISH
ⅥBit rate information
WMA
[POP UP MENU /
MENU]
[TOP MENU]
OFF (File information (elapsed time)) A File name information
A Tag information (title name) A Tag information (artist name)
A OFF (File information (elapsed time))
[U / V / Y / Z]
[ENTER]
[AUDIO]
A
B L1
[SUBTITLE]
[DISPLAY]
JPEG
OFF A File information A File name information A OFF
On-Screen Display
ⅥChapter information
<For VR mode DVD-RW/-R>
You can check information about the current disc by pressing
[DISPLAY].
To call the On-Screen Display, press [DISPLAY] during playback.
Each time you press [DISPLAY], the information changes.
Depending on the media, available information varies.
AORG
A
B
2/5 0:00:00
BD-V AVCHD
OFF A Title/Chapter information A Title information (elapsed
time) A Title information (remaining time) A HDMI information
A OFF
I Bit rate (the amount of video data currently being read)
J Layer number (Only for 2-layered discs)
<Title / Chapter information for BD/AVCHD>
(L0: Layer 0 is played back. L1: Layer 1 is played back)
K Type of title (ORG: original, PL: playlist)
DVD-V DVD-VR
OFF A Chapter information (elapsed time)
ⅥTrack/File information
2/5
1
A Chapter information (remaining time) A Title information
(elapsed time) A Title information (remaining time)
A Bit rate information A HDMI information A OFF
12
13
14
15
2/5 0:00:00 SD
T
A Current chapter number/total number of chapters
B Elapsed time/remaining time of the current chapter
C Current repeat setting (Only when repeat setting is active)
(C: Chapter repeat, T: Title repeat, AB : A-B repeat)
D Indicates that the multi camera angle images are available
on the scene
CD
OFF (Track information (elapsed time)) A Track information
(remaining time) A Disc information* (elapsed time)
A Disc information* (remaining time) A OFF (Track information
(elapsed time))
L Current track (file) number/total number of track (file)
M Elapsed time/remaining time of the current track (file)
N Indication of SD Memory Card playback
(* not available during the program/random playback)
E Current playback status
F Current title number
O Current repeat setting (Only when repeat setting is active)
®
DivX
(T: Track/file repeat, G: Group repeat, A: All repeat)
OFF A File information (elapsed time) A File information
(remaining time) A File name information A HDMI information
A OFF
ⅥTitle information
ⅥDisc information
16
17
MP3
0:04:00
1/10
OFF (File information (elapsed time)) A File name information
A OFF (File information (elapsed time))
1/10 0:04:00
A
G Current title number/total number of titles
H Elapsed time/remaining time of the current title
P Current track number/Total number of tracks
Q Elapsed time/remaining time of the current disc
22
ENGLISH
ENGLISH
ⅥHDMI information
Ⅵ
®
DVD-V DVD-VR CD AVCHD DivX
1) During playback, press [AUDIO].
2) Use [U / V] to select your desired audio stream/channel.
ⅥFile name information
1
22
18
Video Info
Audio Info
Max Channel
:
:
:
YCbCr
/
1080i
1
ENG
Dolby D
3/2.1ch
48k
/4
MP3 MUSIC
23
24
Dolby Digital
6ch
• For audio CD, you can select following options.
“Stereo” : Both right and left channels are active (stereo)
“L-ch”
“R-ch”
3) Press [AUDIO] to exit.
: Only left channel is active
: Only right channel is active
U HDMI video format
V Resolution of the HDMI output image
W HDMI audio format
R Media icon and File name
DivX® file
:
: MP3 file
: JPEG file
Windows Media™
Audio file
X Maximum numbers of audio channels that can be
:
accepted by the connected device
Note
• For VR mode DVD-RW/-R with MTS (Multi-channel Television
Sound) system, you can switch between “1.Main” (main
audio), “1. Sub” (sub audio), and “1.Main/Sub” (main and sub
audio).
ⅥTag information
Note
• If HDMI is not connected, “---” will be displayed for HDMI
information.
19
• For some BD, secondary audio will be output even when sub-
picture is off.
• The sound mode cannot be changed during playback of discs
not recorded in multiple sound.
• Some discs allow to change audio language setting on the
disc menu. (Operation varies between discs. Refer to the
manual accompanying the disc.)
• Pressing [AUDIO] may not work on some discs with multiple
audio Streams/Channels (e.g. DVD which allow to change
audio setting on the disc menu).
TITLE
Selecting the Format of Audio and Video
Selecting Audio Streams/Channels
®
BD-V DVD-V DVD-VR CD AVCHD
DivX
Some discs or SD Cards with AVCHD files contain multiple audio
streams. Those are often in different audio languages or audio
formats. For BD, available audio varies depending on the “BD
[DISPLAY]
20
• If you choose a language that has a 3-letter-language code,
the code will be displayed every time you change the Audio
Language setting. If you choose any other Languages, “---”
• Audio Language selection cannot be made during dialog
ARTIST NAME
Ⅵ
BD-V
1) During playback, press [AUDIO].
2) Use [U / V] to select “Primary” or “Secondary” audio to
set, then press [ENTER].
S Title name based on tag information of current Windows
Media™ Audio file
Primary
• If the disc has no audio language, “Not Available” will be
displayed.
T Artist name based on tag information of current Windows
1
ENG
Secondary
ENG
Dolby D
Multi-ch
Multi-ch
/3
/3
Media™ Audio file
• For discs with DivX® files, only MP3, MP2 or Dolby Digital
audio is displayed. Other audio will be displayed with “---”.
• For DTS-CD (5.1 music disc), “DTS” will be displayed.
(Selecting audio streams or channels is not available.)
2
Dolby D+
“Primary”
: Sets the audio for the main picture.
“Secondary” : Sets the audio for the sub-picture. When
sub-picture is on, the “Secondary” audio will
be output with the sub-picture.
• In order to listen to the secondary audio, the “BD Audio Mode”
must be set to “Mix Audio Output”. Refer to page 24.
3) Use [U / V] to select your desire audio stream/channel.
4) Press [AUDIO] to exit.
23
ENGLISH
ENGLISH
Video / audio outputs for each mode
Selecting Subtitle Language
“Normal”
:
Normal playback mode (pure direct mode
is off).
®
BD-V DVD-V ΑVCHD DivX
[U / V / Y / Z]
BD, DVD-Video, AVCHD and DivX® may have subtitles in 1 or more
languages. Available subtitle languages can be found on the disc
case. You can switch subtitle languages anytime during playback.
“VideoOff”
“Disp.Off”
:
:
Video signal will not be output.
[ENTER]
[RETURN]
Circuitry for front panel display and
indicators will be shut down.
[MODE]
[PURE DIRECT]
Ⅵ
BD-V
“All Off”
:
Video signal will not be output and
circuitry for front panel display and
indicators will be shut down.
1) During playback, press [SUBTITLE].
2) Use [U / V] to select “Primary Subtitle”, “Secondary
Virtual Surround
Subtitle” or “Subtitle Style”, then press [ENTER].
Note
®
BD-V DVD-V DVD-VR CD AVCHD
DivX
Primary Subtitle
Secondary Subtitle
Subtitle Style
2 ENG/11
2 ENG/11
2/25
• If you turn off the unit or put this unit to standby mode, the
pure direct mode will go back to “Normal”.
• [PURE DIRECT] is not available when the setup menu is
displayed.
MP3
WMA
You can enjoy stereo phonic virtual space through your existing
2-channel stereo system.
“Primary Subtitle” : Sets the subtitle for the main picture.
“Secondary Subtitle”: Sets the subtitle for the sub-picture.
1) During playback, press [MODE] repeatedly until the virtual
surround setting appears.
“Subtitle Style”
: Sets style of the subtitle.
Setting the BD Audio Mode
BD-V
3) Use [U / V] to select your desired subtitle.
4) Press [SUBTITLE] to exit.
Off
BD audio mode is to choose between two ways; you could output
the secondary and interactive audio accompanied by the primary
audio or you could output the primary audio only. Depending on
the setting of the mode, Dolby Digital, DTS, Dolby Digital Plus,
Dolby TrueHD, or DTS-HD output changes between Multi PCM
and bitstream.
2) Use [U / V] to select “1” (Natural effect), “2” (Emphasized
effect) or “Off”.
Ⅵ
®
DivX
DVD-V AVCHD
1) During playback, press [SUBTITLE].
3) Press [RETURN] to exit.
2) Use [U / V] to select your desired subtitle.
Note
1
ENG
/3
• Select virtual surround “Off” or lower the volume if the sound
1) In stop mode with BD inserted, press [MODE].
2) Use [U / V] to select desired setting.
Ⅵ“Mix Audio Output”
If it is available, BD-Video’s secondary and interactive audio will be
output with the primary audio.
3) Press [SUBTITLE] to exit.
is distorted.
• This function cannot be used during dialog speed (refer to
page 18).
Note
• For the virtual surround, audio signal will always be 2-channel
• Some discs will only allow you to change the subtitle from the
disc menu. Press [TOP MENU] or [POP UP MENU / MENU] to
display the disc menu.
• If 4-digit language code appears in the subtitle menu, refer to
PCM.
• The secondary audio is the audio for the sub picture
(Director’s comment etc.) and the interactive audio is the
audio for the interactive application (Button click sounds
etc.).
Pure Direct Mode
• If the disc has no subtitle language or subtitle style, “Not
Available” will be displayed.
®
BD-V DVD-V DVD-VR CD AVCHD
DivX
Ⅵ“HD Audio Output”
Only the primary audio will be output. Set this mode in order to
output Dolby Digital, Dolby Digital Plus, Dolby TrueHD, DTS or
DTS-HD sound of BD through HDMI connection.
• For DivX®, the screen only displays the number of subtitle
languages.
MP3
WMA
Use this function to shut down unused circuitry to achieve high
quality analog sound.
1) Press [PURE DIRECT] repeatedly to select your desired pure
3) Press [RETURN] to exit.
direct mode.
• You can also set “BD Audio Mode” from the setup menu.
Refer to page 32.
• Each time you press [PURE DIRECT], the pure direct mode
changes as “Normal” A “VideoOff” A “Disp.Off” A “All Off”
A “Normal”. The modes will be displayed on the front panel
display.
Note
24
ENGLISH
ENGLISH
Playing Back an Audio CD or a Disc with DivX®/MP3/
Windows Media™ Audio/JPEG File
Adjustment range
(* : Default setting)
Off*
+1: Execute MPEG
noise reduction
which reduce the
block noise and
mosquito noise on
the subtitle on movie.
+2: Execute 3D noise
reduction which
detect and delete the
noise by comparing
each picture frames.
Adjusting the Picture
Item
Description
®
DivX
BD-V DVD-V DVD-VR AVCHD
You can adjust the picture quality and store the setting you have
adjusted on memory 1-5.
®
CD DivX
MP3 WMA
JPEG
Insert a disc with DivX®, MP3, Windows Media™
Audio, JPEG files.
• The file list will appear on the screen.
1) During playback, press [MODE] repeatedly until the picture
adjustment menu appears.
1
2
Noise
Reduction
(Not
available for
BD/AVCHD)
• Picture adjustment menu:
Use [U / V] to select a desired folder, file or title,
then press [ENTER]. Use [Y / Z] to go back and
forward between the hierarchies.
• If you press B or [ENTER] on the files, playback will
start.
Reduces the noise of the
playback picture.
Memory 1
2) Use [U / V] to select a memory from “Memory 1” to
“Memory 5” to store your setting, then press [ENTER].
3) Use [U / V] to select an item to be adjusted, then use
[Y / Z] to adjust the setting.
-- / 28
+3: Execute both
MPEG noise reduction
and 3D noise
File List
ABC
2.Brightness
1.Contrast
0
0
MP3_1
MP3_2
MP3_3
MP3_4
MP3_5
MP3_6
MP3_7
reduction.
6.Black Level
7.5 IRE
2/
3
[BLU]
Adjustment range
(* : Default setting)
Page Up
Page Down
Media Mode
Item
Description
[YEL]
Adjusts the difference
between the bright and
dark parts of the picture.
Adjusts the brightness of
the picture.
A Track/ file information
B Playback status
C Current disc or folder name will be displayed.
Contrast
-7 to +7 (0*)
[U / V / Y / Z]
[ENTER]
(For audio CD, “CD-DA” will be displayed.)
Brightness
Sharpness
0 to +15 (0*)
-6 to +6 (0*)
D List of the file/ folder names in the current folder/disc
E Current page/ total page number
F Operation guide
Adjusts the sharpness of
the picture.
Changes the amount of
gamma correction to
adjust overall brightness
of a picture. Make dark/
bright section easier to
see.
B
Icons:
Gamma
Correction
0 to +5 (0*)
: Folders
DivX® files
:
Adjusts the balance
between green and red.
Color
-7 to +7 (0*)
: MP3 files
0 IRE or 7.5 IRE
(7.5 IRE*)
Black Level *1
Adjusts the black level.
: Windows Media™ Audio files
: JPEG files
*1 Not effective for the video signal of COMPONENT VIDEO OUT
(480p/720p/1080i) and HDMI OUT jacks.
It is recommended that files to be played back in this unit are
recorded under the following specifications:
25
ENGLISH
ENGLISH
<DivX®>
Hint for the purchased or rental official DivX® Certified
Official DivX® Certified product
• Playable codec of AVI files
To Play Back the DivX® Subtitle Created by the
User.
product
• When you purchased or rented a DivX® file through the official
site of DivX® video which is called DivX® Video-On-Demand
(VOD) services, a registration code is required every time you get
DivX® 3.x, DivX® 4.x, DivX® 5.x,
DivX® 6.x
:
The subtitle created by the user can be displayed during DivX®
playback.
• Maximum size of image
: 1920 x 1080 @30 fps
1280 x 720 @60 fps
1) After selecting the DivX® file, use [U / V] to select the
file you want to playback, then press [BLU].
Subtitle list will appear.
• Sampling frequency of audio : 16 kHz - 48 kHz
• Audio type
• Some DivX® VOD files are
DivX(R) VOD Rental
: MPEG1 audio layer 3 (MP3),
restricted with the limited
MPEG1 audio layer 2,
Dolby Digital
- - / 11
This rental has
views left.
playable times (you cannot play
them back beyond the limit). If
your DivX® VOD file has such limit,
the playback confirmation screen
will appear.
Do you want to use one of your views now?
Subtitle List
55
<MP3 / Windows Media™ Audio>
• Sampling frequency
• Constant bit rate
[ Off
]
: 44.1 kHz or 48 kHz
[ SMI ]
[ SRT ]
[ SUB ]
Yes
No
: 112 kbps - 320 kbps (MP3),
48 kbps - 192 kbps (Windows
Media™ Audio)
• Use [Y / Z] to select “Yes” if you want to play back the file, or to
select “No” if you do not wish to play it back. Then, press [ENTER]
to confirm the selection.
File List
<JPEG>
• Upper limit
• If there is more than one extension, the extension selection
appears in the subtitle list.
: 2,560 x 1,900 dots
• You cannot play back the
(sub sampling is 4:4:4)
5,120 x 3,840 dots
(sub sampling is up to 4:2:2)
Rental Expired
DivX® VOD files, of which rental
2) Use [U / V] to select the desired extension of the
This rental is expired.
period has been expired. In such
subtitle file you want to display, then press [ENTER].
Please push ‘ENTER’.
case, press [ENTER] and select
other files that can be played
back.
• Lower limit
• File size of image maximum : 12 MB
: 32 x 32 dots
• If you insert a BD-RE/-R, DVD-RW/-R, CD-RW/-R with DivX® files
that are mixed with MP3/Windows Media™ Audio/JPEG files, the
playback media selection screen will be displayed. Use [U / V]
to select your desired media to play back then press [ENTER].
• You cannot play back the
Note
Authorization Error
DivX® VOD files obtained with
• The system can recognize up to 255 folders/999 files for CD,
999 folders/9999 files for BD, DVD and SD Memory Card.
• The name of folder and file can be displayed up to 28
characters. Unrecognizable characters will be replaced with
asterisks.
This player is not authorized to play this video.
different registration codes on
Please push ‘ENTER’.
Please select the media to play back.
this unit. Press [ENTER] and select
other files that can be played
back.
Video
Audio
Picture
• The 9th and deeper hierarchies cannot be displayed for CD
and the 10th and deeper hierarchies cannot be displayed for
BD, DVD and SD Memory Card.
• You cannot playback the DivX®
Resolution Error
file that has the resolution which
• Files whose extension is other than “.avi/ .divx (DivX®)”, “.mp3
(MP3)”, “.wma (Windows Media™ Audio)” or “.jpg / .jpeg
(JPEG)” will not be listed.
This player does not support this video format.
this unit does not support. This
Please push ‘ENTER’.
• Press [YEL] to call up the playback media selection screen in stop
mode.
unit does not support the DivX®
files that have the image size that
exceeds 1920 x 1080 @30 fps or
1280 x 720 @60 fps.
• Some unplayable folders or files may be listed due to the
recording status.
• High-resolution JPEG files take longer to be displayed.
• Progressive JPEG files (JPEG files saved in progressive format)
cannot be played back on this unit.
• For DivX® files with audio format
Audio Format Error
other than MPEG1 audio layer 3
This player does not support this audio format.
• This unit recognize up to 8 characters of file name in the SD
Memory Card. Characters after 8th will not be displayed.
• If a disc contains AVCHD files, the playback of other files
which are in the same disc is not available.
(MP3), MPEG1 audio layer 2 and
Please push ‘ENTER’.
Dolby Digital, audio will not be
output and only the video will be
output.
• File list cannot be called up during playback of DivX® or JPEG
files.
26
ENGLISH
ENGLISH
What is DivX®?
Tips for JPEG/Kodak Picture Playback
• DivX® is a codec (compression/decompression) that can compress
images to a very small amount of data. The software can compress
video data from almost any devices to the size that can be sent on
the Internet without compromising visual quality of the images.
• A file with an extension of “.avi” and “.divx” is called an DivX®
file. All files with the DivX® extension are recognized as MPEG4.
• For more information for DivX®, please visit
• Every press on [ANGLE] will turn the image clockwise by 90
degrees when an image is displayed.
[U / V / Y / Z]
• To change the visual effect for switching the playback image,
press [MODE] once, then use [Y / Z] or [ENTER] to switch
between “Cut In/Out” and “Fade In/Out”. The size change
may have no effect on some files (e.g. files with a small
picture size).
• To change the size of the playback image, during the JPEG/
Kodak Picture playback. Press [MODE] twice, then use
[Y / Z] or [ENTER] to switch between “Normal” (100%) and
“Small” (93%). The size change may have no effect on some
files (e.g. files with a small picture size).
[ENTER]
[SETUP]
[ANGLE]
[RETURN]
[MODE]
Note for DivX®
• Even if the file has an extension of either “.avi” and “.divx”, this
unit cannot play it back if it is recorded in the format other
than DivX®.
C
B
• It may take a while for audio and images to be output after
you inserted a disc and pressed B.
• When playing back the files recorded in high bit rates, the
images can be interrupted in some occasions.
Kodak Picture CD
This unit can also run JPEG files stored on Kodak Picture CD. You
can enjoy picture images on the display device set by playing back
the Picture CD. This unit confirms to ver.7.0 of Kodak Picture CD.
For details of Kodak Picture CD, contact a shop that provides
developing service of Kodak Inc.
Reading the SD Memory Card
MP3
JPEG
WMA
AVCHD
• Although DivX® logo has been obtained for this unit, it may
not be able to play back some data, depending on the
characteristics, bit rates, or audio format settings, etc.
• A DivX® file whose file size exceeds 32 GB cannot be played back.
• If a large-sized DivX® file is selected, it may take awhile to start
the playback (over 20 seconds sometimes).
You can play back the AVCHD, MP3, Windows Media™ Audio and
JPEG files in an SD Memory Card. With the SD Memory Card, you
can also enjoy the special additional contents for BD-ROM Profile
1.1 which can be downloaded from the Internet. You can store the
contents on an SD Memory Card via computer and play them back
with the BD-Video. For more information about the special
additional contents, please refer to the instruction book that came
with the disc.
When Kodak Picture CD is inserted in this unit, Kodak
Picture CD menu appear automatically on the screen.
1
- - / 32
• If you try to playback the DivX® file that has the screen
resolution which this unit does not support, the playback will
be stopped and error message will appear.
Thumbnail
Pictures
Picture 1
Picture 2
Picture 5
Picture 3
Picture 6
• Some DivX® files cannot be played back on this unit due to
the configuration and characteristics of the disc, or due to the
condition of recording and authoring software.
ON / STANDBY
SD CARD
Picture 4
• If DivX® files written on a CD-RW/-R or DVD-RW/-R cannot be
played back, rewrite them on a BD-RE/-R and try to play back.
2/
6
Page Prev
Page Next
Note for DivX® Subtitle
ⅥInserting the SD Memory Card and playback
Insert an SD Memory Card, with the label side
A File information
B Playback status
C Operation guide
• To utilize this function, the following conditions must meet.
- Playback file and the subtitle file must have the same name.
- Playback file and the subtitle file must locate in the same folder.
- Only the subtitle files with the following extensions are
supported; .smi (.SMI), .srt (.SRT), .sub (.SUB), .ass (.ASS), .ssa
(.SSA), .txt (.TXT). (.sub (.SUB) and .txt (.TXT) files may not be
recognized.)
facing up, into the SD CARD slot until it clicks.
If no disc is in operation, “Media Select” screen will
appear on the TV screen.
1
D Current page/ total page number
Use [U / V / Y / Z] to select a desired track to be
played back, then press B or [ENTER].
• An image will be played back from the selected track
and go to the next one in turn.
2
3
SD CARD
- The subtitles that exceeds the playback time of the DivX® file
will not be displayed.
SD Memory Card
Press C to stop playback.
Use [U / V] to select “SD Card”, then press
[ENTER].
The file list will appear.
2
27
ENGLISH
ENGLISH
ⅥRemoving the SD Memory Card
Enjoying BD-Live Discs with Internet
BD-V
In stop mode, push the SD Memory Card and then
slowly remove your finger.
You can enjoy the BD-Live functions which enable you to use the
interactive functions when the unit is connected to the Internet.
(For the Network connection, refer to page 38.)
1
ⅥSetting the media
If the “Media Select” screen disappears before you make the
selection, follow the following procedure to select the media to
playback.
Grasp the card and pull it out from the SD CARD
slot.
This will set the unit to “Disc” mode.
Examples for BD-Live interactive functions :
- Download the additional contents such as the movie’s trailer,
subtitles and BD-J, etc.
2
- While downloading, special video data may be played back.
Press [SETUP] in stop mode.
Compatible Cards:
- SD Memory Card (8MB - 2GB)
• Service and functions differ depending on the disc.
• Follow the instructions given by the disc when using the
BD-Live function.
• You must insert an SD Memory Card when using the BD-Live
function. (SD Memory Card of 1GB is recommended.)
• Do not remove the SD Memory Card when using the BD-Live
function.
1
- SDHC Memory Card (4GB - 8GB)
- miniSD Card (8MB - 2GB)
- microSD Card (8MB - 2GB)
Use [Y / Z] to select
, then press [ENTER].
2
3
4
• For miniSD Card and microSD Card, adapter will be required.
Use [U / V] to select “Media Select”.
Note
• The “Media Select” screen will disappear under the
conditions listed below:
Press [ENTER] repeatedly to select “SD Card”.
Note
- when the screen saver is activated.
- when [RETURN] is pressed.
- when the setup menu is called up.
• You must connect the unit to the Internet and set up
necessary settings in order to use the BD-Live function.
• For certain discs, setting for “BD-Live Setting” may need to be
changed.
• Do not remove the card during its playback.
• This unit supports SD Memory Card with FAT12/FAT16 file
system, and SDHC Memory Card with FAT32 file system.
• Do not delete the folders or files in the SD Memory Card with
your computer. This unit might not read the SD Memory Card.
• This unit recognizes up to 8 characters of file name in the SD
Memory Card. Characters after 8th will not be displayed.
• If a folder or file name includes one of the following
unrecognizable characters, the folder or file name may not be
displayed correctly.
Quick
Media Select
SD Card
BD Audio Mode
HDMI Audio Out
HDMI Video Resolution
Component Output
OSD Language
Mix Audio Output
HDMI Multi(Normal)
Auto
480i
English
• Depending on your connection environment, it may take
time to connect to the Internet or the Internet may not be
connected.
• When BD-Live functions are used and the unit is connected to
the Internet, you may be charged for this communication.
• Some discs with BD-Live function require memory when
playing back the content.
• This will set the unit to “SD Card” mode. To play
back the contents in any discs, exit “SD Card” mode
by selecting “Disc”.
If you cannot play back a disc with BD-Live function, insert an
SD card(1GB or more) which is formatted on this unit.
Press [SETUP] to exit.
- Unrecognizable characters :
. , " = + [ ] ; / \ : | ¥
Note for AACS Online
5
• Even if you turn the unit to the standby mode in “SD Card”
mode, it will be in “Disc” mode the next time you turn it on.
• The player or disc IDs may be sent to the content provider
when playing back a disc with BD-Live function.
• If you save your viewing history on the server by using these
IDs, you will be introduced to other similar movies.
• You can save game score histories.
28
ENGLISH
ENGLISH
Function Setup
Use [U / V] to select setting items.
Follow the procedure below depending on the
setting items.
For setting item A :
Press [ENTER] repeatedly to change options.
For setting item B :
[the Number buttons]
[CLEAR]
3
4
5
6
Follow the procedure below depending on the
setting items.
For setting item A :
[RED / GRN / BLU /
YEL]
1) Press [ENTER].
2) Use [U / V] to select options, then press
Press [ENTER] repeatedly to change options.
For setting item B :
[U / V / Y / Z]
[ENTER].
[ENTER]
• Use [Y] or [RETURN] to go back to the previous
screen.
1)Press [ENTER].
[SETUP]
2)Use [U / V] to select options, then press [ENTER].
[RETURN]
• Use [Y] or [RETURN] to go back to the previous
screen.
Press [SETUP] to exit.
Press [SETUP] to exit.
B
5
Using the Setup Menu
In the setup menu, you can change the setting for audio, video,
language, etc. You cannot change the setting during playback.
Custom
Custom menu contains all the setting items.
Quick
Press [SETUP] in stop mode.
Quick setting menu contains setting items extracted from
custom setting menu which may be used frequently.
1
Press [SETUP] in stop mode.
Use [Y / Z] to select
, then press [ENTER].
1
2
2
3
Use [Y / Z] to select your desired setting category,
Use [Y / Z] to select
, then press [ENTER].
then press [ENTER].
: Language
: Video
: Audio
: Ratings
: Others
Quick
Use [U / V] to select setting items.
• The setting items which are not available with current
situation of this unit will be displayed in gray and you
cannot select the items.
4
Media Select
Disc
BD Audio Mode
HDMI Audio Out
HDMI Video Resolution
Component Output
OSD Language
Mix Audio Output
HDMI Multi(Normal)
Auto
480i
English
29
ENGLISH
ENGLISH
Ⅵ
Video
Ⅵ
Language
Video
Video
Language
TV Aspect
16:9 Wide
YCbCr
Normal
Max
Progressive Mode
Still Mode
Auto
Dialog
Original
Off
HDMI Select
Auto
Subtitle
HDMI RGB Setting
HDMI Auto Format
HDMI Video Resolution
HDMI Deep Color
Component Output
Wall Paper
Picture
Disc Menu
English
English
English
OSD Language
DivX Subtitle
Auto
Auto
480i
Setting items Options
TV Aspect
Setting items
Options
16:9 Wide*:
Dialog
Sets the language for audio.
Original*/English/French/Spanish/German/Italian/
Swedish/Dutch/Russian/Chinese/Japanese/Korean/
Danish/Finnish/Norwegian/Icelandic/Hungarian/
Romanian/Turkish/Greek/Irish/Portuguese/Polish/
Czech/Slovak/Bulgarian/Other
Sets a picture size according to
aspect ratio of the connected
display device.
Select this when a wide-screen TV is connected.
Disc recorded in wide screen format is played over the
entire screen.
4:3 Pan & Scan:
Select this to play back the disc recorded in wide screen
format with 4:3 TV in the pan & scan mode (with the
sides of the picture cut off). Discs which pan & scan is
not specified are played in the letter box mode.
Subtitle
Sets the language for subtitle.
Off*/English/French/Spanish/German/Italian/Swedish/
Dutch/Russian/Chinese/Japanese/Korean/Danish/
Finnish/Norwegian/Icelandic/Hungarian/Romanian/
Turkish/Greek/Irish/Portuguese/Polish/Czech/Slovak/
Bulgarian/Other
4:3 Letter Box:
Select this to play back the disc recorded in wide screen
format with 4:3 TV in the letter box mode. (with black
strips at the top and bottom).
4:3 Squeeze Auto:
When playing 4:3 images, the picture is displayed in the
center of the 16:9 screen with a 4:3 aspect ratio.
Disc Menu
Sets the language for disc menu.
English*/French/Spanish/German/Italian/Swedish/
Dutch/Russian/Chinese/Japanese/Korean/Danish/
Finnish/Norwegian/Icelandic/Hungarian/Romanian/
Turkish/Greek/Irish/Portuguese/Polish/Czech/Slovak/
Bulgarian/Other
Auto/English*/Français/Español
OSD Language
Sets the language for OSD
(on-screen display).
4:3 Squeeze On:
The picture is displayed in the center of the 16:9 TV
screen with a 4:3 aspect ratio, regardless of the original
image size.
DivX Subtitle
Sets the language for DivX®
Subtitle.
English*/French/Spanish
HDMI Select
Select an HDMI output mode
between “YCbCr” and “RGB”.
YCbCr*:
Component format video signals and audio signals are
output from the HDMI OUT.
• Settings with (*) are the default.
• Quick menu consists of the setting menus frequently used, and they are accompanied with
RGB:
mark.
RGB format video signals and audio signals are output
from the HDMI OUT.
Code” on page 47). Only the languages supported by the disc can be selected.
:
:
Displaying the menu
Cancel the menu
Move the cursor
(Up/Down/Left/Right)
Remote control operation
buttons
: Confirm the setting
: Return to previous menu
30
ENGLISH
ENGLISH
Setting items
HDMI RGB Setting
Sets the digital RGB image range
(data range) output from the HDMI
OUT.
Options
Setting items
Progressive Mode
Sets the optimum progressive
mode for the image material
output from HDMI OUT jack and
COMPONENT VIDEO OUT jacks.
Options
Auto*:
Normal*:
The progressive mode will detect 24-frame film material
(movies) and automatically select appropriate
progressive mode.
Output as “16 (black)” to “235 (white)”.
Enhanced:
Output as “0 (black)” to “255 (white)”.
Depending on the display device you are using, the
black colors may seem to stand out when using HDMI
connections. If so, set to “Enhanced”.
Video:
Suited for playing video material discs (TV shows or
animation).
Auto*:
Still Mode
Adjusts picture resolution and
quality in still mode.
HDMI Auto Format
Makes the setting of the “Auto” for
“HDMI Video Resolution”.
Max*:
Automatically selects the best resolution setting
(“Frame” or “Field”) based on the data characteristics of
the pictures.
The maximum resolution that can be input to the
connected HDMI device is detected and the HDMI
output resolution is selected automatically.
Field:
Panel:
Stabilizes the pictures, although the picture quality may
become coarse due to the limited amount of data.
Select “Field” when the pictures are still unstable even if
“Auto” is selected.
The number of pixels of the connected HDMI device’s
panel is detected and the HDMI output resolution is
selected automatically.
Auto*:
Frame:
HDMI Video Resolution
HDMI video resolution will be selected automatically
depending on the connected HDMI device and setting
of the “HDMI Auto Format”.
Displays relatively motionless pictures in higher
resolution. “Frame” improves the picture quality,
although it may unstabilize the pictures due to alternate
output of 2-field data.
Sets the HDMI video resolution.
Source Direct:
HDMI video resolution will be set to the recorded
resolution of a playback media.
480i
480p
720p
1080i
1080p
1080p24:
Gives a natural and high quality film reproduction of 24-
frame film material. The connected display device has to
be compatible with 1080p24 frame input.
HDMI Deep Color
Auto*:
Sets whether output the picture
from HDMI with the Deep Color or
not.
The picture through the HDMI will be output with Deep
Color if the connecting device supports Deep Color.
Off:
The picture through the HDMI will be output without
Deep Color.
480i*
480p
720p
1080i
Component Output
Sets the video resolution for
component output.
:
:
Displaying the menu
Cancel the menu
Move the cursor
(Up/Down/Left/Right)
Remote control operation
: Confirm the setting
: Return to previous menu
buttons
31
ENGLISH
ENGLISH
Setting items
Wall Paper
Sets the picture to be displayed on
the screen for stop mode or audio
playback mode.
Options
Ⅵ
Audio
Picture*
Blue
Black
Gray
Audio
• Settings with (*) are the default.
• Quick menu consists of the setting menus frequently used, and they are accompanied with
BD Audio Mode
HDMI Audio Out
Down Sampling
DRC
Mix Audio Output
HDMI Multi(Normal)
mark.
Off
• For “HDMI RGB Setting”, select “Enhanced” if the black-white contrast is not clear. The setting is
effective only for HDMI RGB output.
Auto
• Even if “HDMI Video Resolution” is set to “1080p24”, for the BD that is not recorded by 1080p24
frame or for DVD, a video resolution supported by the disc and the display device will be output
instead of 1080p24 frame.
• An individual picture on the screen is called as “Frame” , which consists of two separate images
called as “Field”. Some pictures may be blurred at the auto setting in “Still Mode” due to their
data characteristics.
• If the picture is not output properly to the display device because of the “HDMI Video
Resolution” or “Component Output” setting, press and hold B on the front panel for more than
5 seconds. Both settings will be reset to the default automatically.
• If “Component Output” is set to “480i”/“480p”, “4:3 Squeeze Auto” and “4:3 Squeeze On” in “TV
Aspect” are not available.
Setting items Options
BD Audio Mode
Mix Audio Output*:
Output the secondary and interactive audio with
For BD, select whether to output
the secondary and interactive
audio with primary audio if it is
available or only the primary
audio. Refer to “Setting the BD
primary audio if it is available.
• If HDMI is connected, for video resolution for the component output, you can only select video
resolution that currently output from HDMI OUT or 480i.
HD Audio Output:
Output only the primary audio. Set this mode in order to
output Dolby Digital, Dolby Digital Plus, Dolby TrueHD,
DTS or DTS-HD sound of BD through HDMI connection.
• If the video resolution for the component output and HDMI video resolution does not match, the
video resolution for the component output will be switched to current HDMI output resolution.
COMPONENT VIDEO OUT jacks may not output any signals depend on the disc material.
• If you play back copy-protected DVD-Video, 480p signal will be output from the COMPONENT
VIDEO OUT jacks, when “Component Output” is set to “720p” or “1080i”.
• The setting items which are not available with current situation of this unit will be displayed in
gray and you cannot select the items.
• Even if “HDMI Select” is set to “YCbCr”, if the display device does not support YCbCr, RGB will be
output.
• If “HDMI Video Resolution” is set to “Source Direct”, “1080p” or “1080p24”, you cannot set
“Component Output”.
HDMI Multi(Normal)*:
The multi-channel audio signals are output from the
HDMI OUT with a bitstream or PCM.
HDMI Audio Out
Sets the audio format for the audio
output from the HDMI OUT.
HDMI Multi(LPCM):
The multi-channel audio signals are output from the
HDMI OUT with a PCM.
HDMI 2ch:
The audio signals are output from the HDMI OUT with a
downmixed to 2ch PCM.
Audio Mute:
Mutes the HDMI audio signal, and set the signal format
of the DIGITAL OUT.
options.
• The default setting of the “BD Audio Mode” is “Mix Audio Output”. If you want to output only the
high quality primary audio, set “BD Audio Mode” to “HD Audio Output”.
:
:
Displaying the menu
Cancel the menu
Move the cursor
(Up/Down/Left/Right)
Remote control operation
buttons
: Confirm the setting
: Return to previous menu
32
ENGLISH
ENGLISH
Setting items
Down Sampling
Sets the digital audio output when
playing BD or DVD recorded in
PCM.
Options
Bitstream*:
When playing back discs recorded in Dolby Digital, Dolby Digital Plus, Dolby TrueHD, DTS or
DTS-HD, the corresponding core stream (Dolby Digital or DTS) are output.
On:
PCM signals are converted to 48 kHz for output.
• Set to “On” when using digital connections to an AV
amplifier that is not compatible with sampling
frequencies of 96 kHz.
LPCM:
Full decoded 2ch PCM signal will be output from DIGITAL OUT.
• This setting is not effective when the HDMI audio signal is output.
Off*:
• When both HDMI and DIGITAL OUT is connected to other devices, the audio signals currently
output from the HDMI OUT will be output from the DIGITAL OUT jack as well, except that HDMI 2ch
signal will be output from HDMI OUT jack, when connected device does not support Dolby Digital
and DTS.
• When “BD Audio Mode” is set to “Mix Audio Output”, the audio output from DIGITAL OUT will follow
the setting in the “HDMI Audio Out”. (When outputting Multi PCM from HDMI OUT, 2ch Downmix
PCM will be output from DIGITAL OUT.)
For BD or DVD recorded in PCM without copyright
protection, 2-channel audio signals up to 192 kHz are
output as PCM signals with no conversion.
DRC
Auto*:
Sets whether to compress the
range of sound volume (Dynamic
Range Control) when Dolby Digital,
Dolby Digital Plus or Dolby TrueHD
audio is played back.
When the discs that are recorded in the Dolby TrueHD
format is in playback, this unit detects DRC setting of
the disc and set the DRC setting of this unit to “On” or
“Off” automatically.
Off
Speaker Setting
This unit allows you to enjoy multi-channel surround sound such as 7.1-channel / 5.1-channel
surround.
On
<Example of basic layout with 7.1ch surround system>
• Settings with (*) are the default.
• Quick menu consists of the setting menus frequently used, and they are accompanied with
mark.
• Under following circumstances, “HDMI Multi(Normal)”, “HDMI Multi(LPCM)” and “HDMI 2ch” is
not available.
Front speaker (left)
Front speaker (right)
- HDMI cable is not connected to HDMI OUT jack.
- Connected display device is off.
- Connected display device is not compatible with audio output.
Center speaker
Digital Out Setting
Subwoofer
When the “Audio Mute” is selected in “HDMI Audio Out” setting, audio signal of the HDMI is muted
and the audio signals output from DIGITAL OUT changes depending on the “Digital Out” setting.
Surround speaker (left)
Surround speaker (right)
<“Digital Out” setting>
Audio A HDMI Audio Out A Audio Mute
Surround back speaker (left)
Surround back speaker (right)
:
:
Displaying the menu
Cancel the menu
Move the cursor
(Up/Down/Left/Right)
Remote control operation
buttons
: Confirm the setting
: Return to previous menu
33
ENGLISH
ENGLISH
To make the most of its feature, set up your speakers appropriately by referring to the table below.
• For “Speaker Configuration” setting, the settings of each speaker size may be adjusted
automatically corresponding to each setting. (e.g. If “Front” is set to “Small”, you cannot set
“Center”, “Surround” and “Surround Back” to “Large”.)
Speaker setting options are available in SETUP A Quick A HDMI Audio Out A HDMI Multi(LPCM) or
SETUP A Custom A Audio A HDMI Audio Out A HDMI Multi(LPCM)
Menu
Setting items
Test Tone:
“Test Tone” is the test
tone which can be
output from the
speakers so that you
can adjust the volume
for each speaker.
Options
Off*
Descriptions
How to navigate through the “HDMI Multi(LPCM)” setting
1) Use [U / V] to select the menu item.
Channel Level
Tests or sets the
volume for each
speaker.
Select “Off” to deactivate
the “Test Tone” feature.
Select “Manual”, then
press [ENTER] to manually
set the volume for the
desired speaker.
Select “Auto”,then press
[ENTER] to automatically
output the test tone from
each speaker.
2) Use [U / V] to select setting items.
• Use [RETURN] to go back to the previous screen.
3) Use [Y / Z] to select desired options. (Except for “Test Tone” and “Default”.)
Manual
Auto
For “Test Tone”:
Use [Y / Z] to select “Manual” or “Auto”, then press [ENTER].
• The test tone will be output. If you select “Manual”, use [U / V] to select desired speaker, then use
[Y / Z] to adjust the volume. If you select “Auto”, use [Y / Z] to adjust the volume of the speaker
that output the test tone.
• If you want to stop the test tone, press [RETURN].
For “Default”:
Front Lch
0 dB to -12 dB If you have selected
(0 dB*)
0 dB to -12 dB
(0 dB*)
0 dB to -12 dB
(0 dB*)
0 dB to -12 dB
(0 dB*)
0 dB to -12 dB
(0 dB*)
0 dB to -12 dB
(0 dB*)
0 dB to -12 dB
(0 dB*)
Press [ENTER] to reset the “Speaker Configuration”, “Channel Level” or “Delay Time”
“Manual” in “Test Tone”,
select the desired speaker
to set and adjust the
volume for the selected
speaker.
If you have selected
“Auto” in “Test Tone”, test
tone will be output
automatically in order.
Adjust the volume of the
speaker that output the
test tone.
setting to the default.
Center
4) Press [SETUP] to exit.
Menu
Setting items
Front
Options
Large*
Descriptions
Front Rch
Speaker Configuration
Select the desired
speaker to set. Then
change the setting
appropriately by
referring to the
Large:
For the large speakers
with strong low frequency
reproduction capabilities.
Small:
For the small speakers
which do not provide
strong bass sound.
You cannot change the
setting of “Subwoofer”.
If connected device is not
compatible with
subwoofer, “Subwoofer”
will be displayed in gray.
Surround Rch
Surround Back Rch
Surround Back Lch
Surround Lch
Subwoofer
Small
Large*
Small
On*
Center
descriptions.
Subwoofer
Surround
Large*
Small
Large*
Small
0 dB to -12 dB
(0 dB*)
Surround Back
Default
Default
Select “Default”, then
press [ENTER] to reset the
“Channel Level” setting to
the default.
Select “Default”, then
press [ENTER] to reset the
“Speaker Configuration”
setting to the default.
:
:
Displaying the menu
Cancel the menu
Move the cursor
(Up/Down/Left/Right)
Remote control operation
buttons
: Confirm the setting
: Return to previous menu
34
ENGLISH
ENGLISH
Ⅵ
Ratings
Menu
Delay Time
Setting items
Distance
Options
Feet*
Descriptions
Ratings control allows you to set a limit, which prevents your children from viewing inappropriate
materials. Playback will stop if the ratings exceed the levels you set, and it will require you to enter a
password before the disc will play back.
Set the desired measure
system. This measure system
will be used for “Delay Time”
setting. Press [ENTER] to
switch the setting.
This is a parameter
for optimizing the
timing at which the
sound is output from
the speakers
according to their
distance from the
listening position.
Meters
Front
0ft to 60ft (12ft*) Select the distance from the
(0m to 18m
(3.6m*))
0ft to 60ft (12ft*)
(0m to 18m
(3.6m*))
listening point to the
speaker to get the ideal
delay time.
Ratings
Center
BD Rating Level
DVD Rating Level
Password Change
All
All
Surround
Surround Back
Default
0ft to 60ft (10ft*)
(0m to 18m
(3.0m*))
0ft to 60ft (10ft*)
(0m to 18m
(3.0m*))
1) Use [Y / Z] to select
2) Press [the Number buttons] to enter your 4-digit password.
, then press [ENTER].
Select “Default”, then press
[ENTER], to reset the “Delay
Time” setting to the default.
For the first time use: Press [the Number buttons] to enter any 4-digit number (except for 4737),
then press [ENTER]. That number will be used as the password from the second time. Record your
password in case you forget it.
• Settings with (*) are the default.
• If you forgot the password, enter [4], [7], [3], [7]. The password will be cleared and rating level
will be set to “All”.
• For “Delay Time”, the difference between the value of the “Front”, “Surround” and “Surround
Back” setting cannot exceed 15 ft (4.5m), and the difference between the value of the “Front”
and “Center” setting cannot exceed 5 ft (1.5m).
• While you input the password, press [CLEAR] to clear the number, then re-enter the password.
• For “Delay Time”, the value of the “Center”, “Surround” and “Surround Back” setting cannot
exceed the value of the “Front” setting.
• For “Delay Time”, the setting of “Center”, “Surround” and “Surround Back” will be changed
automatically to the setting value of the “Front”. (e.g. If the “Front” is set to 60ft (18m), the setting
of “Center”, “Surround” and “Surround Back” will be changed to 60ft (18m) as well.)
• If you want to stop the test tone, press [RETURN].
Proceed to A – C
A) BD Rating Level
1) Use [U / V] to select “BD Rating Level”, then press [ENTER].
2) Use [U / V] to select your desired option, then press [ENTER].
“All”
: To release the limitation.
“Age Setting” : To set the age limitation.
• After selecting “Age Setting”, use [the Number buttons] to enter the age from 0 – 254.
(e.g. for age 15, press [0], [1], [5])
3) Press [SETUP] to exit.
B) DVD Rating Level
1) Use [U / V] to select “DVD Rating Level”, then press [ENTER].
2) Use [U / V] to select a desired level, then press [ENTER].
3) Press [SETUP] to exit.
:
:
Displaying the menu
Cancel the menu
Move the cursor
(Up/Down/Left/Right)
Remote control operation
buttons
: Confirm the setting
: Return to previous menu
3 5
ENGLISH
ENGLISH
Setting items
Angle Icon
Options
Description
RATING EXPLANATIONS
• All
• 8 [Adult]
: Parental control is inactive; all discs can play back.
: DVD software of any grades (adult/general/children) can be played
back.
On
Off*
On:
The angle icon appears on the
screen when playback the scene
with various angle.
• 7 [NC-17]
• 6 [R]
• 5 [PGR]
• 4 [PG13]
• 3 [PG]
• 2 [G]
: No one under 17 admitted.
: Restricted; under 17 requires accompanying parent or adult guardian.
: Parental guidance recommended.
: Unsuitable for children under 13.
: Parental guidance suggested.
: General audience.
Off:
The angle icon disappears on the
screen.
On:
Screen Saver T
On*
Off
If this unit is left with no activity
for more than 5 minutes, the
screen saver will be activated.
• 1 [Kid Safe] : Suitable for children.
C) Password Change
Off:
1) Use [U / V] to select “Password Change”, then press [ENTER].
2) Enter a new 4-digit password, then press [ENTER].
3) Press [SETUP] to exit.
Sets off the screen saver.
On:
If this unit is left with no activity
for more than 30 minutes, this
unit turns to the standby mode
automatically.
Auto Power Off
On*
Off
Ⅵ
Others
Off:
Sets off the auto power off.
Panel Display
Sets the brightness of the
front panel display.
Bright*
Dimmer
Auto
Bright:
Others
Others
Front panel display gets brighter.
Dimmer:
Front panel display gets darker.
Auto:
Front panel display gets darker
during playback.
Remote Control Setting
HDMI CEC
DENON1
On
Angle Icon
Off
Screen Saver
Auto Power Off
Panel Display
Slide Show
On
Media Select
Disc
On
Network Connection
Network Update
Enable(Easy)
Bright
5sec
DivX(R) VOD
Closed Caption
Off
Slide Show
5sec*
10sec
Sets the display time for
the still picture (in JPEG
format) playback.
T Screen saver does not function during playback or when the playback is paused.
:
:
Displaying the menu
Cancel the menu
Move the cursor
(Up/Down/Left/Right)
Remote control operation
buttons
: Confirm the setting
: Return to previous menu
36
ENGLISH
ENGLISH
Setting items
DivX(R) VOD
Options
Registration Code
Your registration code is:
cccccccccc
To learn more visit
Description
Setting items
HDMI CEC
Sets whether to utilize
the HDMI CEC function.
Options
Description
This menu item provides you with
the DivX® VOD registration code.
The DivX® registration code is
required when downloading the
DivX® VOD files from the Internet.
To learn more about DivX® VOD,
On*
Off
Disc*
SD Card
Disc:
Media Select
Select this when you play back a
Select the media to
playback.
disc.
SD Card:
Deactivation Code
Your deactivation code is:
cccccccc
To learn more visit
This menu item provides you with
the DivX® VOD deactivation code.
The DivX® deactivation code is
required when re-downloading
the DivX® VOD files from the
Internet after deactivating. To
learn more about DivX® VOD, visit
This menu deactivates the
DivX® VOD files and provides you
with new registration code and
deactivation code in order to
download the DivX® VOD files
from the Internet.
Select this when you play back a
SD Memory Card.
Network Connection
Refer to “Network
for more details of each
setting.
Connection Test
Enable(Easy)*
Perform the network connection
test to check if the network
settings are correctly made.
Set all the network settings to the
default settings. (In most cases,
you can connect to the Internet
without making any changes to
the default settings.)
Set the network settings manually
in accordance with your network
environment, if necessary.
Deactivate the network
connection.
Deactivation
Yes
No*
Enable(Custom)
Disable
Closed Caption
On
Sets whether to display
the closed caption or not
using the caption decoder
(commercially available ).
Off*
Network Update
Refer to “Network
more detail.
Yes
No*
You can update the firmware
version by connecting this unit to
the Internet.
Remote Control Setting
Changes the signal code
of a remote control. (Refer
DENON1*
DENON2
:
:
Displaying the menu
Cancel the menu
Move the cursor
(Up/Down/Left/Right)
Remote control operation
buttons
: Confirm the setting
: Return to previous menu
37
ENGLISH
ENGLISH
If you want to set the network settings back to the default settings as above (except “BD-Live
Network Connection
Setting”), follow the procedure below.
2) Use [U / V] to select “Enable(Easy)”, then press [ENTER].
Connection Test
• The unit will start the connection test automatically and the test result will appear right after the
test finishes.
• After the connection test finishes, press [ENTER] to go to network status confirmation screen.
3) Press [ENTER] to activate the network settings and set the network connection
automatically. Press [SETUP] to exit.
After you made IP address/DNS settings or when a LAN cable is connected, always perform the
connection test to check if the connection is correctly made.
1) Press [SETUP] in stop mode.
2) Use [Y / Z] to select
, then press [ENTER].
3) Use [Y / Z] to select
, then press [ENTER].
4) Use [U / V] to select “Network Connection”, then press [ENTER].
5) Use [U / V] to select “Connection Test”, then press [ENTER].
Connection test will start automatically and the test result will appear right after the connection test
finishes.
Note
• The setting of “BD-Live Setting” will not be set back to the default, even if you follow the
procedure.
• “Testing...” : The test is in progress.
Enable(Custom)
• “Pass”
• “Fail”
: Connection test is successfully completed.
: Connection test failed. Check the connection settings.
If you need to set specific settings manually in accordance with your network environment, select
“Enable(Custom)” to set each setting as necessary.
Press [ENTER] to go to the list of network status confirmation screen.
ⅥIP Address Setting
2) Use [U / V] to select “Enable(Custom)”, then press [ENTER].
3) Use [U / V] to select “IP Address Setting”.
Connection Test
IP Address
∗∗∗
∗∗∗
∗∗∗
∗∗∗
∗∗∗
.
.
.
.
.
∗∗∗
∗∗∗
∗∗∗
∗∗∗
∗∗∗
.
.
.
.
.
∗∗∗
∗∗∗
∗∗∗
∗∗∗
∗∗∗
.
.
.
.
.
∗∗∗
∗∗∗
∗∗∗
∗∗∗
∗∗∗
Subnet Mask
4) Press [ENTER] repeatedly to select the desired setting.
“Auto(DHCP)” : If your router has DHCP server function, select “Auto(DHCP)”.
Default Gateway
Primary DNS
Secondary DNS
“Manual”
: If your router does not have DHCP server function, select “Manual”.
then press ‘ENTER’.
If you select “Manual”, follow the following instruction to set the IP address.
Use [U / V] to select “IP Address”, then press [ENTER].
• IP address setting screen will appear. Enter IP address, subnet mask and default gateway with
[U / V / Y / Z] and [the Number buttons].
6) Press [ENTER] to go back to the previous screen or press [SETUP] to exit.
Note
• If the connection test passes, you can enjoy the BD-Live functions using the Internet without
making any extra settings.
IP Address Setting
• If the connection test fails, you may need to change the MAC address settings of your router.
You can check the MAC address of this unit at the bottom of the “Enable(Custom)” screen.
IP Address
∗∗∗
.
.
.
∗∗∗
.
.
.
∗∗∗
.
.
.
∗∗∗
Subnet Mask
∗∗∗
∗∗∗
∗∗∗
∗∗∗
∗∗∗
∗∗∗
∗∗∗
∗∗∗
Default Gateway
then press ‘ENTER’.
Enable(Easy)
Network settings are set to the following settings initially. (In most cases, you can connect to the
Internet without making any changes to the default settings.)
• Enter the IP address number after checking the specifications of your router.
• If the IP address number is unknown, check the IP address number of other devices.
(e.g. PC connected via LAN cable) and assign a different number from those of other devices.
After you enter all correctly, press [ENTER].
- IP Address Setting
- DNS Setting
- Proxy Setting
- Connection Speed
- BD-Live Setting
Auto(DHCP)
Auto(DHCP)
Do Not Use
Auto
• Confirmation message will appear.
Allow
:
:
Displaying the menu
Cancel the menu
Move the cursor
(Up/Down/Left/Right)
Remote control operation
buttons
: Confirm the setting
: Return to previous menu
38
ENGLISH
ENGLISH
ⅥProxy Setting
2) Use [U / V] to select “Proxy Setting”.
IP Address Setting
3) Press [ENTER] repeatedly to select the desired setting.
• For default settings, select “Do Not Use”.
Is Setting OK?
IP Address
∗∗∗
∗∗∗
∗∗∗
.
.
.
∗∗∗
∗∗∗
∗∗∗
.
.
.
∗∗∗
∗∗∗
∗∗∗
.
.
.
∗∗∗
∗∗∗
∗∗∗
Subnet Mask
Default Gateway
• Please use this setting when instructed by your Internet service provider.
If you select “Use”, follow the following instruction to set the proxy address and proxy port.
No
Yes
Proxy Address
Use [U / V] to select “Proxy Address”, then press [ENTER].
Enter proxy address.
• The keyboard screen will appear.
Use [U / V] to select “Yes”, then press [ENTER] to complete the setting.
5) Press [SETUP] to exit.
ⅥDNS Setting
2) Use [U / V] to select “DNS Setting”.
Proxy Address
3) Press [ENTER] repeatedly to select the desired setting.
“Auto(DHCP)” : If your router has DHCP server function select “Auto(DHCP)”.
∗∗∗∗∗∗∗∗∗∗∗∗_
1
a
k
2
b
l
3
4
d
n
x
5
e
o
y
6
f
7
g
q
.
8
h
r
9
i
0
c
j
t
“Manual”
: If your router does not have DHCP server function, select “Manual”.
m
w
p
z
s
_
If you select “Manual”, follow the following instruction to set the DNS.
u
v
-
OK
Use [U / V] to select “Primary DNS”, then press [ENTER].
Clear
All Clear
a/A/@
OK
• DNS setting screen will appear. Enter primary DNS and secondary DNS with [U / V / Y / Z]
and [the Number buttons].
[U / V / Y / Z] : Move the highlight.
[the Number buttons] : Enter number.
[ENTER] : Enter the highlighted number/word.
DNS Setting
[RED] : Clear the entered number or word.
[GRN] : Clear all the entered numbers or words.
[BLU] : Switch between abc ? ABC ? @!?
[YEL] : Set the entered number or word.
Primary DNS
∗∗∗
∗∗∗
.
.
∗∗∗
∗∗∗
.
.
∗∗∗
∗∗∗
.
.
∗∗∗
∗∗∗
Secondary DNS
then press ‘ENTER’.
After you enter all correctly, press [YEL].
• Confirmation message will appear.
• Enter the numbers instructed by your Internet provider.
• If the number is unknown, check the number of other devices (e.g. PC connected via LAN
cable) and assign the same number.
Proxy Address
After you enter all correctly, press [ENTER].
Is Setting OK?
************
• Confirmation message will appear.
No
DNS Setting
Yes
Is Setting OK?
Primary DNS
∗∗∗
∗∗∗
.
.
∗∗∗
∗∗∗
.
.
∗∗∗
∗∗∗
.
.
∗∗∗
∗∗∗
Use [U / V] to select “Yes”, then press [ENTER] to complete the setting and go back to the
Secondary DNS
proxy setting screen.
No
Yes
Use [U / V] to select “Yes”, then press [ENTER] to complete the setting.
4) Press [SETUP] to exit.
:
:
Displaying the menu
Cancel the menu
Move the cursor
(Up/Down/Left/Right)
Remote control operation
buttons
: Confirm the setting
: Return to previous menu
39
ENGLISH
ENGLISH
“10BASE Full” : Set the connection speed to “10BASE Full”.
“100BASE Half” : Set the connection speed to “100BASE Half”.
“100BASE Full” : Set the connection speed to “100BASE Full”.
Proxy Port
Use [U / V] to select “Proxy Port”, then press [ENTER].
• Proxy port setting screen will appear.
Enter proxy port number with [the Number buttons].
4) Press [RETURN] to go back to previous screen, or press [SETUP] to exit.
ⅥBD-Live Setting
Proxy Port
You can limit the Internet access from the BD-Live functions. (The default setting is “Allow”.)
Please select the input Proxy Port.
then press ‘ENTER’.
2) Use [U / V] to select “BD-Live Setting”, then press [ENTER].
3) Use [U / V] to select the desired setting, then press [ENTER].
∗∗∗∗∗
“Allow” : Internet access is permitted from all BD-Live contents.
“Limited Allow” : Internet access is permitted only for BD-Live contents which have content
owner certificates. Internet access without the certificates are prohibited.
“Prohibit” : Internet access is prohibited from all BD-Live contents.
After you enter all correctly, press [ENTER] to complete the setting.
4) Press [SETUP] to exit.
4) Press [RETURN] to go back to previous screen, or press [SETUP] to exit.
Note
For IP Address Settings and DNS Settings:
Disable
• The range of input number is between 0 and 255.
You can deactivate all the network connection and settings by following the instructions below.
2) Use [U / V] to select “Disable”, then press [ENTER].
3) Press [RETURN] to go back to previous screen, or press [SETUP] to exit.
• If you enter a number larger than 255, the number will automatically be 255.
• The manually entered number will be saved even if you change the setting to “Auto(DHCP)”.
• When you enter a wrong number, press [CLEAR] to cancel. (The number will be back to “0”.)
• If you want to enter 1 or 2-digit number in one cell, press [Z] to move on to the next cell.
• If the entered IP address or the default gateway or primary DNS number is same as the default
setting, IP address setting will be set to “Auto(DHCP)”. (The manually entered number will be
saved.)
• When IP address setting is set to “Manual”, the setting of DNS setting will automatically be
“Manual” and when IP address setting is set to “Auto(DHCP)”, you can set either “Auto(DHCP)” or
“Manual” for DNS setting.
Note
• The network connection can be reactivated by setting the network connection to “Enable(Easy)”
or “Enable(Custom)”.
Network Update
For Proxy Settings:
You can update the software by connecting the unit to the Internet.
2) Use [U / V] to select “Network Update”, then press [ENTER].
• Confirmation message will appear.
3) Use [U / V] to select “Yes”, then press [ENTER].
• The range of input number for the proxy port number is between 0 and 65535. (If you enter a
number larger than 65535, it will be regarded as 65535.)
• For proxy port, the selected ports may be blocked and not be able to use depending on your
network.
• This unit will start checking for the latest firmware version.
4) Confirmation message will appear.
ⅥConnection Speed
Use [U / V] to select “Yes”, then press [ENTER].
You can set connection speed as your preference. (The default setting is “Auto”.)
• The unit will start downloading the latest firmware version.
5) When the download completes, confirmation message will appear.
Press [ENTER].
2) Use [U / V] to select “Connection Speed”, then press [ENTER].
3) Use [U / V] to select the desired setting, then press [ENTER].
• The unit will start updating the firmware version.
“Auto” : Set the appropriate connection speed automatically, in accordance with your
network environment.
“10BASE Half” : Set the connection speed to “10BASE Half”.
• It may take a while to complete the updating. (Please wait until “100%” appears on the front
panel display.)
6) After updating finishes, this unit will restart and open the disc tray automatically.
:
:
Displaying the menu
Cancel the menu
Move the cursor
(Up/Down/Left/Right)
Remote control operation
buttons
: Confirm the setting
: Return to previous menu
40
ENGLISH
ENGLISH
Setting items
Erase Saved BD-ROM
Data (SD Card)
Options
Description
Note
Yes
No*
Yes:
• Please do not unplug the AC cord or LAN cable while executing the “Network Update”.
• All settings will remain the same even if you update the firmware version.
• The disc tray will open automatically after updating finishes. This is not a malfunction.
Re-format BD-ROM Data (SD Card)
used for BD-Java.
No:
Does not perform the initialization.
Network Settings
Yes
No*
Yes:
Initialize
Initialize all the network settings.
No:
Initialize the setting or SD Memory Card.
Does not perform the initialization.
1) Press [SETUP] in stop mode.
Initialize
2) Use [Y / Z] to select
, then press [ENTER].
3) Use [U / V] to select a desired option, then press [ENTER].
Setup
“Setup”
: All the settings except for the “Ratings” and “Network
Connection” setting will be reset to default.
: Initialize the SD Memory Card.
Format SD Card
Erase Saved BD-ROM Data (Player)
Erase Saved BD-ROM Data (SD Card)
Network Settings
“Format SD Card”
“Erase Saved BD-ROM Data (Player)” : BD-ROM data for Player used for BD-Java will be
initialized.
“Erase Saved BD-ROM Data (SD Card)” : BD-ROM data for SD Card (available only when an SD
Memory Card is inserted) used for BD-Java will be
initialized.
“Network Settings”
: Reset the network setting to the default.
Setting items
Setup
Options
Description
4) Confirmation message will appear. Use [U / V] to select “Yes”, then press [ENTER].
5) Press [SETUP] to exit.
Yes
Yes:
No*
Resets all settings in setup, except
for “Ratings” and “Network
Note
Connection”, to the factory default.
• Do not remove the SD Memory Card while executing the “Format SD Card” or “Erase Saved BD-
ROM Data (SD Card)”. It will damage the card.
No:
Does not perform the initialization.
Yes:
• “Format SD Card” and “Erase Saved BD-ROM Data (SD Card)” are not available when a Blu-ray
Disc is in the unit.
Format SD Card
Yes
No*
Re-format SD Card.
No:
Does not perform the initialization.
Erase Saved BD-ROM
Data (Player)
Yes
No*
Yes:
Re-format BD-ROM Data (Player)
used for BD-Java.
No:
Does not perform the initialization.
:
:
Displaying the menu
Cancel the menu
Move the cursor
(Up/Down/Left/Right)
Remote control operation
buttons
: Confirm the setting
: Return to previous menu
41
ENGLISH
ENGLISH
Others
Trademark Information
Explanation of Terms
Numerics
4:3 Letter Box
When a wide (16 : 9) disc is played back by connecting a 4 : 3 TV
and the DBP-1610, this function plays back the image with black
area at the top and bottom.
DivX®, DivX Certified®, and associated logos are trademarks of
DivX, Inc. and are used under license.
Manufactured under license from Dolby Laboratories. Dolby and
the double-D symbol are trademarks of Dolby Laboratories.
4:3 Pan-and-Scan
When a wide (16 : 9) disc is played back by connecting a 4 : 3 TV
and the DBP-1610, this function cuts left and right of the played
back image to the 4 : 3 size according to the disc’s control
information.
Manufactured under license under U.S. Patent #’s: 5,451,942;
5,956,674; 5,974,380; 5,978,762; 6,226,616; 6,487,535; 7,392,195;
7,272,567; 7,333,929; 7,212,872 & other U.S. and worldwide
patents issued & pending. DTS is a registered trademark and the
DTS logos, Symbol, DTS-HD and DTS-HD Master Audio | Essential
are trademarks of DTS, Inc. ©1996-2008 DTS, Inc. All Rights
Reserved.
Windows Media and the Windows logo are trademarks or
registered trademarks of Microsoft Corporation in the United
States and/or other countries.
A
Analog Audio
An electrical signal that directly represents sound. Compare this to
digital audio which can be an electrical signal, but is an indirect
representation of sound. See also “Digital Audio”.
“BONUSVIEW” is a trademark of Blu-ray Disc Association.
Aspect Ratio
This is the length and width ratio of the TV screen. The
conventional TV’s screen ratio is 4 : 3 and the wide screen TV’s
screen ratio is 16 : 9.
HDMI, the HDMI logo and High-Definition Multimedia Interface
are trademarks or registered trademarks of HDMI Licensing LLC.
“BD-LIVE” logo is trademark of Blu-ray Disc Association.
AVCHD
“Blu-ray Disc” and
are trademarks.
AVCHD is a new format for high definition video camcorders
which can record and play high-resolution HD images.
“x.v.Color” and the “x.v.Color” logo are trademarks of Sony
Corporation.
is a trademark of DVD Format/Logo Licensing Corporation.
B
is trademark of Eastman Kodak Company.
SDHC logo is a trademark.
BD-J (Java)
With BD-Videos, there are fun software with more interactive
functions (games) using Java applications.
BD-Live
BD-Live is a BD-Video (BD-ROM version 2 Profile 2.0) which
contains new functions (e.g. Internet connection), in addition to
the BONUSVIEW function.
Java and all other trademarks and logos are trademarks or
registered trademarks of Sun Microsystems, Inc. in the United
States and/or other countries.
Bit Rate
This expresses the read amount per 1 second of video/audio data
recorded in a disc.
Blu-ray Disc
“AVCHD” and the “AVCHD” logo are trademarks of Panasonic
Corporation and Sony Corporation.
This is one-side 1 layer disc having 25GB capacity and can record
high vision video movie and games.
42
ENGLISH
ENGLISH
BONUSVIEW
Dolby Digital Plus
HDMI
Special images for BD-Videos. It includes comment of the movie
director, simultaneously developing sub-story, and images from
different angles.
This is an extension version of Dolby Digital and is a high sound
quality digital audio technology adopted as an optional audio for
Blu-ray disc.
This is an abbreviation of High-Definition Multimedia Interface,
which is an AV digital interface that can be connected to a TV or
amplifier. Video signal and audio signal can be connected using 1
cable.
Dolby TrueHD
C
Hub
This lossless coding technology is adopted as optional audio for
Blu-ray disc and supports 7.1 channels.
A device used for connecting multiple devices to the network.
Chapter
This is a break intended by a producer who organizes the title of
BD or DVD-Video. The chapter search function searches the
beginning of this break.
Downmix
I
This function converts the number of channels of surround audio
to less number of channels and plays back.
DTS
This is an abbreviation of Digital Theater System, which is a digital
audio system developed by DTS. When playing back audio by
connecting this system with a device such as DTS amplifier,
accurate sound field position and realistic sound effect as if you
are in a movie theater can be obtained.
Interactive Audio
Audio such as click sound that is generated during operation and
is recorded in the title of BD-Videos.
Interlacing (interlaced scanning)
This conventional method used to project images on a TV displays
1 frame of image in half and half, respectively as 2 fields.
Component Video Output
Each signal of luminance (Y) and component (PB/CB, PR/CR) is
independent to output so that you can experience picture color as
it is. Also, due to compatibility with progressive video (525p/
480p), you can experience higher-density picture than that in
interlace (525i/480i).
IP Address
DTS-HD
D
A set of numbers which are assigned to devices participating in a
computer network.
This audio technology provides higher sound quality and
enhanced functionality than the conventional DTS and is adopted
as an optional audio for Blu-ray disc. This technology supports
multi-channel, high data transfer speed, high sampling frequency,
and lossless audio playback. Maximum 7.1 channels are supported
in Blu-ray disc.
Deep Color
J
This technology allows expression of more number of colors than
the conventional 8 bits and can reproduce colors close to natural
ones without color streak.
DHCP (Dynamic Host Configuration Protocol)
This mechanism automatically perform network configuration
such as IP address for network devices including DBP-1610, PC,
and broadband router.
JPEG (Joint Photographic Experts Group)
JPEG is a method of compressing still picture files. You can copy
JPEG files on disc or SD Memory Card from a computer and play
back the files on this unit.
Dynamic Range
The difference between the maximum undistorted sound level
and the minimum sound level that is discernible above the noise
emitted by the device.
L
Digital Audio
LAN (Local Area Network)
A group of computer networks covering a small area like a
company, school or home.
An indirect representation of sound by numbers. During
recording, the sound is measured at discrete intervals (44,100
times a second for CD audio) by an analog-to-digital converter,
generating a stream of numbers. On playback, a digital-to-analog
converter generates an analog signal based on these numbers.
F
Finalize
Linear PCM
This is processing that enables playing back of disc of BD/DVD/CD,
which was recorded using a recorder, by other players.
This signal is uncompressed PCM (Pulse Code Modulation) signal.
This is the same system as the CD audio but this uses 192kHz,
96kHz, and 48kHz sampling frequencies in BD or DVD and
provides higher sound quality than CD.
G
DivX®
DivX® is a codec (compression/decompression) that can compress
pictures to a very small amount of data. The software can
compress video data from almost any devices to the size that can
be sent on the Internet without compromising visual quality of
the pictures.
Gateway
Local Storage
IP address of the electronic devices (such as router) which provide
Internet access.
A storage area of sub contents for playing virtual packages on
BD-Video.
H
M
DNS Server
HDCP
MPEG
A server which translates Internet domain names into IP
addresses.
Dolby Digital (5.1ch Surround)
This is a stereophonic effect developed by Dolby Laboratories.
This is maximum 5.1 channels of independent multi-channel
audio system.
When transmitting digital signals between devices, this copyright
protection technology encrypts the signals to prevent content
from being copied without authorization.
This is an abbreviation of Moving Picture Experts Group, which is
an international standard of the moving picture audio
compression method. Images of BD and DVD are recorded using
this method.
43
ENGLISH
ENGLISH
P
S
PCM (Pulse Code Modulation)
Sampling Frequency
The most common system of encoding digital audio, found on CD The rate which sound is measured by a specified interval to turn
and DAT. Excellent quality, but requires a lot of data compared to
formats such as Dolby Digital and MPEG audio. For compatibility
with digital audio recorders (CD, MD and DAT) and AV amplifiers
with digital inputs, this unit can convert Dolby Digital and MPEG
audio to PCM. See also “Digital Audio”.
into digital audio data. The numbers of sampling in one second
defines as sampling frequency. The higher the rate, the better the
sound quality.
Secondary Audio
The audio signals recorded in the BONUSVIEW of BD-Video.
(e.g. Comment of movie director)
Picture-in-Picture
This BD-Video function allows you to view making or commentary
scenes in the secondary video while viewing the main story in the
primary video.
Subnet Mask
A mask which is used to determine what subnet an IP address
belongs to.
Popup Menu
T
This menu recorded in BD software. While playing back a BD, this
menu can be displayed on the front of the screen and can be
operated.
Primary Audio
This audio signal is recorded in the main story in BD-Video.
Title
This is the unit of content that consists of chapters of BD or DVD-
Video. Some BD or DVD-Video may include multiple titles.
V
Progressive (sequential scanning)
This is a scanning system of video signal that displays 1 frame of
video as one image. Compared to the interlace system, this system
provides images with less flickering and bleeding.
Virtual Package
The function which copies data to other media (local storage)
from the Internet and play the secondary video, secondary audio
and the subtitle at the same time. The method of the playback
varies depending on discs.
Proxy Server
Proxy server is a server which acts as an intermediary between a
workstation user and the Internet to ensure security.
W
R
Windows Media™ Audio
Windows Media™ Audio is the audio compressing technology
developed by Microsoft. You can copy Windows Media™ Audio
files on disc or SD Memory Card from a computer and play them
back on this unit.
Rating
Depending on the age of the viewer, this function restricts playing
back of BD-Video or DVD-Video. DBP-1610 can be set to restrict
viewing in 1 to 254 level for BD-Video, and 1 to 8 level for DVD-
Video.
X
Region Code
x.v.Color
This code indicates country or region where the BD or DVD-Video
can be played back.
Router
A networking device which distinguishes the IP address assigned
to each device and routing and forwarding information in the
computer network.
“x.v.Color” is a promotion name given to the products that have
the capability to realize a wide color space based on the xvYCC
specifications and is a trademark of Sony Corporation.
44
ENGLISH
ENGLISH
Index
Playback (SD Card) ............................................................................... 27, 28
Popup menu .......................................................................................8, 17, 44
Program playback ....................................................................................... 19
Progressive .......................................................................................12, 31, 44
Pure direct mode .....................................................................................9, 24
) A
page
) F
page
A-B Repeat ................................................................................................. 8, 19
AC cord ....................................................................................................... 3, 15
Angle .................................................................................................... 8, 21, 36
Aspect ratio .............................................................................................30, 42
Audio language ............................................................................................23
Audio signal .....................................................................................12, 13, 33
Audio stream/channel ...............................................................................23
AVCHD .................................................................................3, 4, 5, 12, 13, 42
Fast forward .....................................................................................7, 8, 9, 18
Fast reverse .......................................................................................7, 8, 9, 18
Format ..................................................................... 4, 12, 13, 26, 31, 32, 33
) H
page
) R
page
HDMI cable ................................................................................................7, 11
HDMI Deep Color ................................................................................. 31, 43
HDMI resolution .......................................................................................7, 12
Random playback ....................................................................................8, 20
RCA audio cable ...........................................................................3, 7, 11, 14
RCA video cable ..................................................................................3, 7, 11
Region code ...............................................................................................5, 44
Remote control ............................................................................... 6, 7, 8, 37
Repeat playback .......................................................................................8, 19
Resume playback ......................................................................................... 17
) I
page
) B
page
Initialize ............................................................................................................41
Interactive audio ............................................................................ 24, 32, 43
Interlace ............................................................................................ 12, 31, 43
BD audio mode ......................................................................................24, 32
BD-Live ...................................................................................3, 14, 28, 40, 42
BD-Video .........................................................................................4, 5, 12, 13
Brightness ........................................................................................... 9, 25, 36
) J
JPEG ........................................................................ 3, 4, 5, 25, 26, 27, 36, 43
) L page
page
) S
page
) C
page
SD Card ..............................................................................4, 7, 27, 28, 37, 41
Sharpness ....................................................................................................... 25
Slow forward .............................................................................................9, 18
Source Direct ......................................................................................9, 12, 31
Speaker setting ...............................................................................33, 34, 35
Step by step playback ................................................................................ 18
Subtitle language ........................................................................................ 24
Supplied accessories .....................................................................................3
CD-DA ................................................................................................................ 4
CD-RW/-R ......................................................................................................4, 5
Channel level .................................................................................................34
Chapter ..................................................................................5, 19, 21, 22, 43
LAN cable ...................................................................................................7, 14
Language code ..................................................................................... 30, 47
) M
page
Marker ..............................................................................................................21
MP3 ................................................................................ 3, 4, 5, 12, 13, 25, 26
) D
page
) T
page
Dialog speed ..................................................................................................18
Dimmer ...................................................................................................8, 9, 36
Disc menu ........................................................................................... 8, 17, 30
DivX® VOD ...............................................................................................26, 37
DTS ......................................................................... 12, 13, 24, 32, 33, 42, 43
DTS-CD .............................................................................................4, 5, 12, 13
DVD-RW/-R ............................................................................................4, 5, 17
DVD-Video ......................................................................................4, 5, 12, 13
) N
page
Title .................................................................................. 5, 17, 19, 21, 22, 44
Top menu ..........................................................................................................8
Track .............................................................................................. 5, 19, 21, 22
Network update .................................................................................... 37, 40
Noise reduction .............................................................................................25
) O
On-screen display .............................................................................. 3, 8, 22
) P page
page
) V
Virtual surround ........................................................................................... 24
) W page
) X page
x.v.Color ...............................................................................................3, 42, 44
) Z page
Zoom ............................................................................................................8, 20
page
Parental .................................................................................................... 35, 36
Password ................................................................................................. 35, 36
Pause ...................................................................................................7, 8, 9, 17
Picture Adjustment ......................................................................................25
Picture control .................................................................................................3
Playback (DVD-RW/-R) ........................................................................ 17, 20
45
ENGLISH
ENGLISH
Troubleshooting
If the unit does not perform properly when operated as instructed in this owner’s manual, check the unit, consulting the following checklist.
Problem
Solution
Page
Problem
Solution
Page
No power
- Check if the AC cord is properly connected.
- Unplug the AC cord once, and wait for 5-10 seconds and then plug it
in again.
–
–
Buttons do not work or the unit
stops responding
- To completely reset the unit, unplug the AC cord from the AC outlet
for 5-10 seconds.
–
The unit does not respond to some - Operations may not be permitted by the disc.
operating commands during
playback
No sound or picture
- Check if the connected display device is turned on.
- Check the HDMI connection. (Check the status of the HDMI related
indications.)
- Check the RCA audio/video cable connections.
- Check if the pure direct mode is set to “VideoOff” or “All Off”. If it is
the case, set it to “Disp.Off” or “Normal”.
- Check whether the connected display device or other device
supports HDCP. (This unit will not output a video signal unless the
other device supports HDCP.)
- Check whether the output format of this unit (HDMI FORMAT)
matches the supported input format of other connected device.
- Check if the “HDMI Deep Color” is set to “Auto”. If it is the case, set it
to “Off”.
–
Refer to the instructions of the disc.
The unit cannot read BD/DVD/CD - Condensation? (Let sit 1 or 2 hours)
- You are attempting to play a disc other than one with one of the
marks on page 4.
- Wipe the dirt off the disc or replace the disc.
Angle does not switch
- The angle cannot be switched for BD/DVD which do not contain
multiple angles. In some cases multiple angles are only recorded for
specific scenes.
title is selected
The password for rating level has - Enter the default password “4737”, then your forgotten password will
been forgotten
Distorted picture
- Sometimes a small amount of picture distortion may appear.
This is not a malfunction.
- Connect this unit directly to the TV. If the RCA audio/video cables are
connected to a VCR, pictures may be distorted due to the copy
protection system.
–
be cleared.
Cannot connect to the network
- Check if the LAN cable connection is properly made.
- Turn on the modem or broadband router.
- Check the network settings.
- Check if the broadband router and/or modem is correctly connected.
- Check the “BD-Live Setting”.
–
Completely distorted picture or
black/white picture with BD/DVD
- Make sure the disc is compatible with this unit.
Cannot connect to the network
while my PC is connected to the
network
- Check the content of your Internet service contract to see if your
Internet Service Provider prevents multiple terminals connecting at
the same time.
–
No sound or distorted sound
- Adjust the volume.
–
- Check that the speakers are connected correctly.
- Check the HDMI connections.
- Check the “Audio” settings.
Cannot use the BD-Live function
- Use an SD card with enough space.
- Remove the write protection of an SD card.
–
Picture freezes momentarily during - Check the disc for fingerprints/scratches and clean with a soft cloth
playback
wiping from center to edge.
- Clean the disc.
The playback of BD-Video or
download of data does not
perform properly
- Check if an SD card is correctly inserted.
- Do not remove the card during playback as some BD-Videos require
an SD card during playback.
Disc cannot be played back
- Clean the disc.
- Ensure the disc label is facing up.
- Check if the disc is defective by trying another disc.
- Cancel the ratings control or change the control level.
- Insert a correct disc that can be played back on this unit.
–
“HDCP NOK” appears on the front “HDCP NOK” appears under the following conditions:
panel display
- When the connected device does not support HDCP.
- When the connected device is recognized as an HDCP incompatible
by HDMI SRM.
- When the connected device supports HDCP but cannot be
recognized as an HDCP compatible for some reason.
SD Memory Card cannot be read
- The format of the card does not match to this unit or the card is not
compatible.
–
–
No return to start-up screen when - Reset this unit by turning it off, then on again.
disc is removed
Note
The unit does not respond to the - Aim the remote control directly at infrared sensor window on the
remote control
front of the unit.
• Some functions are not available in specific modes, but this is not a malfunction. Read the
description in this owner’s manual for details on correct operations.
• Some functions are prohibited on some discs.
- Reduce the distance to infrared sensor window.
- Replace the batteries in the remote control.
- Re-insert the batteries with their polarities (+/- signs) as indicated.
- Make the signal code of the remote control match to the signal code
of the unit.
–
46
ENGLISH
ENGLISH
Language Code
Language
Esperanto
Estonian
Code
5161
5166
Language
Kinyarwanda
Kirghiz
Kirundi
Korean [KOR]
Kurdish
Code
6469
5771
6460
5761
5767
Language
Quechua
Rhaeto-Romance
Romanian [RUM]
Russian [RUS]
S
Samoan
Sangho
Sanskrit
Scots Gaelic
Serbian
Serbo-Croatian
Sesotho
Setswana
Shona
Sindhi
Singhalese
Siswat
Slovak [SLO]
Slovenian
Somali
Spanish [SPA]
Sundanese
Swahili
Swedish [SWE]
T
Tagalog
Tajik
Code
6367
6459
6461
6467
Language
Tigrinya
Tonga
Tsonga
Turkish [TUR]
Turkmen
Twi
Code
6655
6661
6665
6664
6657
6669
Language
A-B
Abkhazian
Afar
Afrikaans
Albanian
Amharic
Code
4748
4747
4752
6563
4759
4764
5471
4765
4771
4772
4847
5167
4860
5072
4854
4855
4864
4853
5971
4851
F-H
Faroese
Fiji
Finnish [FIN]
French [FRE]
Frisian
Galician
Georgian
German [GER]
Greek [GRE]
Greenlandic
Guarani
Gujarati
Hausa
Hebrew
Hindi
Hungarian [HUN]
I-K
5261
5256
5255
5264
5271
5358
5747
5051
5158
5758
5360
5367
5447
5569
5455
5467
L-N
6559
6553
6547
5350
6564
6554
6566
6660
6560
6550
6555
6565
6557
6558
6561
5165
6567
6569
6568
Laothian
Latin
Latvian;Lettish
Lingala
Lithuanian
Macedonian
Malagasy
Malay
Malayalam
Maltese
Maori
Marathi
Moldavian
Mongolian
Nauru
Nepali
Norwegian [NOR]
O-R
Occitan
Oriya
Oromo(Afan)
Panjabi
Pashto;Pushto
Persian
Polish [POL]
Portuguese [POR]
5861
5847
5868
5860
5866
5957
5953
5965
5958
5966
5955
5964
5961
5960
6047
6051
6061
U-Z
Arabic
Ukrainian
Urdu
Uzbek
Vietnamese
Volapuk
Welsh
Wolof
Xhosa
Yiddish
Yoruba
Zulu
6757
6764
6772
6855
6861
4971
6961
7054
5655
7161
7267
Armenian
Assamese
Aymara
Azerbaijani
Bashkir
Basque
Bengali;Bangla
Bhutani
Bihari
Bislama
Breton
Bulgarian [BUL]
Burmese
Byelorussian
C-E
Cambodian
Catalan
Chinese [CHI]
Corsican
Croatian
Czech [CZE]
Danish [DAN]
Dutch [DUT]
English [ENG]
Icelandic [ICE]
Indonesian
Interlingua
Interlingue
Inupiak
5565
5560
5547
5551
5557
5347
5566
5647
5669
5760
5765
5757
5759
4947
7254
4961
5464
4965
5047
6058
5160
6149
6164
6159
6247
6265
5247
6258
6266
Irish [IRI]
6658
6653
6647
6666
6651
6654
4861
Italian [ITA]
Japanese [JPN]
Javanese
Kannada
Kashmiri
Kazakh
Tamil
Tatar
Telugu
Thai
Tibetan
Note
• If you choose a language that has a 3-letter-language code (written in bracket), the code will be
choose any other languages, ‘---’ will be displayed instead.
47
ENGLISH
ENGLISH
Specifications
ANALOG AUDIO OUTPUT
Output level: 2Vrms (10kΩ/kohms)
2 channel (L, R) output connector: Pin jacks, 1 set
SIGNAL SYSTEM
NTSC color
APPLICABLE DISCS
(1) BD/DVD-Video Discs
AUDIO OUTPUT PROPERTIES
(1) Frequency response
1-layer 12cm single-sided discs, 2-layer 12cm single-sided discs, 2-layer 12cm double-sided discs
(1 layer per side) / 1-layer 8cm single-sided discs (DVD)
(2) BD-RE/BD-R (Recorded in BDMV format)
1-layer 12cm single-sided discs, 2-layer 12cm single-sided discs
1-layer 8cm single-sided discs, 2-layer 8cm single-sided discs
(3) DVD-R
1-layer 12cm single-sided discs, 2-layer 12cm single-sided discs
1-layer 8cm single-sided discs, 2-layer 8cm single-sided discs
(4) DVD-RW
1 BDs (linear PCM)
: 20Hz to 22kHz (48kHz sampling)
: 20Hz to 44kHz (96kHz sampling)
: 20Hz to 88kHz (192kHz sampling)
: 20Hz to 22kHz (48kHz sampling)
: 20Hz to 44kHz (96kHz sampling)
: 20Hz to 20kHz
2 DVDs (linear PCM)
3 CDs
(2) S/N ratio
(3) Total harmonic distortion : 1kHz 0.004%
: 115dB
(4) Dynamic range
: 100dB (BD/DVD) / 98dB (CD)
1-layer 12cm single-sided discs
1-layer 8cm single-sided discs
(5) Compact discs (audio CD)
12cm discs, 8cm discs
(6) CD-RW/-R
DIGITAL AUDIO OUTPUT
Coaxial digital output: Pin jack, 1 set
POWER SUPPLY
AC 120V, 60Hz
12cm discs, 8cm discs
POWER CONSUMPTION
30W (Standby: 0.6W)
APPLICABLE MEMORY CARDS
(1) SD Memory Card
(2) SDHC Memory Card
(3) miniSD Card
MAXIMUM EXTERNAL DIMENSIONS
W : 435mm (17-3/16")
H : 106mm (4-3/16")
(4) microSD Card
D : 309.3mm (12-3/16")
(including protruding parts)
VIDEO OUTPUT
Y output level: 1Vp-p (75Ω/ohms)
Output connectors: Pin jack, 1 set
MASS
4.1 kg (9.1 lbs)
COMPONENT OUTPUT
Y output level: 1Vp-p (75Ω/ohms)
PB/CB output level: 0.7Vp-p (75Ω/ohms)
PR/CR output level: 0.7Vp-p (75Ω/ohms)
Output connectors: Pin jacks, 1 set
REMOTE CONTROL
RC-1128
Infrared pulse type
Supply: DC 3V, 2 R6/AA batteries
External dimensions:
HDMI OUTPUT
W : 52mm (2-1/16")
H : 227mm (8-15/16")
D : 30mm (1-3/16")
Output jack: 19-pin HDMI terminal, 1 set
HDMI ver. 1.3a (Deep Color, Dolby Digital Plus, Dolby TrueHD, DTS-HD)
ETHERNET TERMINAL
10BASE-T/ 100BASE-TX, 1 set
Mass: 138g (0.3 lbs) (including batteries)
• For purposes of improvement, specifications and design are subject to change without notice.
48
ENGLISH
License
c) If the modified program normally reads commands interactively when run, you must cause it, when started running
for such interactive use in the most ordinary way, to print or display an announcement including an appropriate
copyright notice and a notice that there is no warranty (or else, saying that you provide a warranty) and that users
may redistribute the program under these conditions, and telling the user how to view a copy of this License.
(Exception: if the Program itself is interactive but does not normally print such an announcement, your work based
on the Program is not required to print an announcement.)
8. If the distribution and/or use of the Program is restricted in certain countries either by patents or by copyrighted
interfaces, the original copyright holder who places the Program under this License may add an explicit geographical
distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus
excluded. In such case, this License incorporates the limitation as if written in the body of this License.
This section describes software license used for DBP-1610. To
maintian the correct content, the original (English) is used.
9. The Free Software Foundation may publish revised and/or new versions of the General Public License from time to
time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new
problems or concerns.
Exhibit A
These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from
the Program, and can be reasonably considered independent and separate works in themselves, then this License,
and its terms, do not apply to those sections when you distribute them as separate works. But when you distribute the
same sections as part of a whole which is a work based on the Program, the distribution of the whole must be on the
terms of this License, whose permissions for other licensees extend to the entire whole, and thus to each and every
part regardless of who wrote it.
GPL
GNU GENERAL PUBLIC LICENSE
Version 2, June 1991
Each version is given a distinguishing version number. If the Program specifies a version number of this License which
applies to it and "any later version", you have the option of following the terms and conditions either of that version
or of any later version published by the Free Software Foundation. If the Program does not specify a version number
of this License, you may choose any version ever published by the Free Software Foundation.
Copyright (C) 1989, 1991 Free Software Foundation, Inc.,
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.
10. If you wish to incorporate parts of the Program into other free programs whose distribution conditions are different,
write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write
to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two
goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of
software generally.
Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the
intent is to exercise the right to control the distribution of derivative or collective works based on the Program.
Preamble
In addition, mere aggregation of another work not based on the Program with the Program (or with a work based on
the Program) on a volume of a storage or distribution medium does not bring the other work under the scope of this
License.
The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU
General Public License is intended to guarantee your freedom to share and change free software--to make sure the
software is free for all its users. This General Public License applies to most of the Free Software Foundation's software
and to any other program whose authors commit to using it. (Some other Free Software Foundation software is covered
by the GNU Lesser General Public License instead.) You can apply it to your programs, too.
NO WARRANTY
3. You may copy and distribute the Program (or a work based on it, under Section 2) in object code or executable form
under the terms of Sections 1 and 2 above provided that you also do one of the following:
11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO THE
EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS
AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR
IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU.
SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR
CORRECTION.
a) Accompany it with the complete corresponding machine-readable source code, which must be distributed under
the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or,
When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are designed to
make sure that you have the freedom to distribute copies of free software (and charge for this service if you wish), that
you receive source code or can get it if you want it, that you can change the software or use pieces of it in new free
programs; and that you know you can do these things.
b) Accompany it with a written offer, valid for at least three years, to give any third party, for a charge no more than
your cost of physically performing source distribution, a complete machine-readable copy of the corresponding
source code, to be distributed under the terms of Sections 1 and 2 above on a medium customarily used for
software interchange; or,
To protect your rights, we need to make restrictions that forbid anyone to deny you these rights or to ask you to
surrender the rights. These restrictions translate to certain responsibilities for you if you distribute copies of the
software, or if you modify it.
12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR
ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO
YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT
OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING
RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO
OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.
c) Accompany it with the information you received as to the offer to distribute corresponding source code. (This
alternative is allowed only for noncommercial distribution and only if you received the program in object code or
executable form with such an offer, in accord with Subsection b above.)
For example, if you distribute copies of such a program, whether gratis or for a fee, you must give the recipients all the
rights that you have. You must make sure that they, too, receive or can get the source code. And you must show them
these terms so they know their rights.
The source code for a work means the preferred form of the work for making modifications to it. For an executable
work, complete source code means all the source code for all modules it contains, plus any associated interface
definition files, plus the scripts used to control compilation and installation of the executable. However, as a special
exception, the source code distributed need not include anything that is normally distributed (in either source or
binary form) with the major components (compiler, kernel, and so on) of the operating system on which the
executable runs, unless that component itself accompanies the executable.
We protect your rights with two steps: (1) copyright the software, and (2) offer you this license which gives you legal
permission to copy, distribute and/or modify the software.
END OF TERMS AND CONDITIONS
How to Apply These Terms to Your New Programs
Also, for each author's protection and ours, we want to make certain that everyone understands that there is no
warranty for this free software. If the software is modified by someone else and passed on, we want its recipients to
know that what they have is not the original, so that any problems introduced by others will not reflect on the original
authors' reputations.
If you develop a new program, and you want it to be of the greatest possible use to the public, the best way to achieve
this is to make it free software which everyone can redistribute and change under these terms.
If distribution of executable or object code is made by offering access to copy from a designated place, then offering
equivalent access to copy the source code from the same place counts as distribution of the source code, even
though third parties are not compelled to copy the source along with the object code.
To do so, attach the following notices to the program. It is safest to attach them to the start of each source file to most
effectively convey the exclusion of warranty; and each file should have at least the "copyright" line and a pointer to
where the full notice is found.
Finally, any free program is threatened constantly by software patents. We wish to avoid the danger that redistributors
of a free program will individually obtain patent licenses, in effect making the program proprietary. To prevent this, we
have made it clear that any patent must be licensed for everyone's free use or not licensed at all.
4. You may not copy, modify, sublicense, or distribute the Program except as expressly provided under this License. Any
attempt otherwise to copy, modify, sublicense or distribute the Program is void, and will automatically terminate your
rights under this License. However, parties who have received copies, or rights, from you under this License will not
have their licenses terminated so long as such parties remain in full compliance.
<one line to give the program's name and a brief idea of what it does.>
Copyright (C) <year> <name of author>
The precise terms and conditions for copying, distribution and modification follow.
GNU GENERAL PUBLIC LICENSE
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
5. You are not required to accept this License, since you have not signed it. However, nothing else grants you
permission to modify or distribute the Program or its derivative works. These actions are prohibited by law if you do
not accept this License. Therefore, by modifying or distributing the Program (or any work based on the Program), you
indicate your acceptance of this License to do so, and all its terms and conditions for copying, distributing or
modifying the Program or works based on it.
This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public
License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later
version.
0. This License applies to any program or other work which contains a notice placed by the copyright holder saying it
may be distributed under the terms of this General Public License. The "Program", below, refers to any such program
or work, and a "work based on the Program" means either the Program or any derivative work under copyright law:
that is to say, a work containing the Program or a portion of it, either verbatim or with modifications and/or translated
into another language. (Hereinafter, translation is included without limitation in the term "modification".) Each
licensee is addressed as "you".
This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied
warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
more details.
6. Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a
license from the original licensor to copy, distribute or modify the Program subject to these terms and conditions. You
may not impose any further restrictions on the recipients' exercise of the rights granted herein. You are not
responsible for enforcing compliance by third parties to this License.
You should have received a copy of the GNU General Public License along with this program; if not, write to the Free
Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
Activities other than copying, distribution and modification are not covered by this License; they are outside its scope.
The act of running the Program is not restricted, and the output from the Program is covered only if its contents
constitute a work based on the Program (independent of having been made by running the Program). Whether that
is true depends on what the Program does.
Also add information on how to contact you by electronic and paper mail.
7. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to
patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the
conditions of this License, they do not excuse you from the conditions of this License. If you cannot distribute so as to
satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence
you may not distribute the Program at all. For example, if a patent license would not permit royalty-free redistribution
of the Program by all those who receive copies directly or indirectly through you, then the only way you could satisfy
both it and this License would be to refrain entirely from distribution of the Program.
If the program is interactive, make it output a short notice like this when it starts in an interactive mode:
Gnomovision version 69, Copyright (C) year name of author
Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
This is free software, and you are welcome to redistribute it under certain conditions; type `show c' for details.
1. You may copy and distribute verbatim copies of the Program's source code as you receive it, in any medium, provided
that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of
warranty; keep intact all the notices that refer to this License and to the absence of any warranty; and give any other
recipients of the Program a copy of this License along with the Program.
The hypothetical commands `show w' and `show c' should show the appropriate parts of the General Public License. Of
course, the commands you use may be called something other than `show w' and `show c'; they could even be mouse-
clicks or menu items--whatever suits your program.
If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the
section is intended to apply and the section as a whole is intended to apply in other circumstances.
You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection
in exchange for a fee.
It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest
validity of any such claims; this section has the sole purpose of protecting the integrity of the free software
distribution system, which is implemented by public license practices. Many people have made generous
contributions to the wide range of software distributed through that system in reliance on consistent application of
that system; it is up to the author/donor to decide if he or she is willing to distribute software through any other
system and a licensee cannot impose that choice.
You should also get your employer (if you work as a programmer) or your school, if any, to sign a "copyright disclaimer"
for the program, if necessary. Here is a sample; alter the names:
2. You may modify your copy or copies of the Program or any portion of it, thus forming a work based on the Program,
and copy and distribute such modifications or work under the terms of Section 1 above, provided that you also meet
all of these conditions:
Yoyodyne, Inc., hereby disclaims all copyright interest in the program `Gnomovision' (which makes passes at
compilers) written by James Hacker.
a) You must cause the modified files to carry prominent notices stating that you changed the files and the date of any
change.
<signature of Ty Coon>, 1 April 1989
Ty Coon, President of Vice
b) You must cause any work that you distribute or publish, that in whole or in part contains or is derived from the
Program or any part thereof, to be licensed as a whole at no charge to all third parties under the terms of this
License.
This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License.
This General Public License does not permit incorporating your program into proprietary programs. If your program is a
subroutine library, you may consider it more useful to permit linking proprietary applications with the library. If this is
what you want to do, use the GNU Lesser General Public License instead of this License.
1
LICENSE
GNU LESSER GENERAL PUBLIC LICENSE
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
However, linking a "work that uses the Library" with the Library creates an executable that is a derivative of the Library
(because it contains portions of the Library), rather than a "work that uses the library". The executable is therefore
covered by this License. Section 6 states terms for distribution of such executables.
Exhibit B
LGPL
0. This License Agreement applies to any software library or other program which contains a notice placed by the
copyright holder or other authorized party saying it may be distributed under the terms of this Lesser General Public
License (also called "this License"). Each licensee is addressed as "you".
GNU LESSER GENERAL PUBLIC LICENSE
Version 2.1, February 1999
When a "work that uses the Library" uses material from a header file that is part of the Library, the object code for the
work may be a derivative work of the Library even though the source code is not. Whether this is true is especially
significant if the work can be linked without the Library, or if the work is itself a library. The threshold for this to be true
is not precisely defined by law.
Copyright (C) 1991, 1999 Free Software Foundation, Inc.
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.
A "library" means a collection of software functions and/or data prepared so as to be conveniently linked with
application programs (which use some of those functions and data) to form executables.
If such an object file uses only numerical parameters, data structure layouts and accessors, and small macros and
small inline functions (ten lines or less in length), then the use of the object file is unrestricted, regardless of whether it
is legally a derivative work. (Executables containing this object code plus portions of the Library will still fall under
Section 6.)
The "Library", below, refers to any such software library or work which has been distributed under these terms. A
"work based on the Library" means either the Library or any derivative work under copyright law: that is to say, a work
containing the Library or a portion of it, either verbatim or with modifications and/or translated straightforwardly into
another language. (Hereinafter, translation is included without limitation in the term "modification".)
[This is the first released version of the Lesser GPL. It also counts as the successor of the GNU Library Public License,
version 2, hence the version number 2.1.]
Preamble
Otherwise, if the work is a derivative of the Library, you may distribute the object code for the work under the terms of
Section 6. Any executables containing that work also fall under Section 6, whether or not they are linked directly with
the Library itself.
"Source code" for a work means the preferred form of the work for making modifications to it. For a library, complete
source code means all the source code for all modules it contains, plus any associated interface definition files, plus
the scripts used to control compilation and installation of the library.
The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU
General Public Licenses are intended to guarantee your freedom to share and change free software--to make sure the
software is free for all its users.
6. As an exception to the Sections above, you may also combine or link a "work that uses the Library" with the Library to
produce a work containing portions of the Library, and distribute that work under terms of your choice, provided that
the terms permit modification of the work for the customer's own use and reverse engineering for debugging such
modifications.
Activities other than copying, distribution and modification are not covered by this License; they are outside its scope.
The act of running a program using the Library is not restricted, and output from such a program is covered only if its
contents constitute a work based on the Library (independent of the use of the Library in a tool for writing it).
Whether that is true depends on what the Library does and what the program that uses the Library does.
This license, the Lesser General Public License, applies to some specially designated software packages--typically
libraries--of the Free Software Foundation and other authors who decide to use it. You can use it too, but we suggest
you first think carefully about whether this license or the ordinary General Public License is the better strategy to use in
any particular case, based on the explanations below.
You must give prominent notice with each copy of the work that the Library is used in it and that the Library and its
use are covered by this License. You must supply a copy of this License. If the work during execution displays
copyright notices, you must include the copyright notice for the Library among them, as well as a reference directing
the user to the copy of this License. Also, you must do one of these things:
1. You may copy and distribute verbatim copies of the Library's complete source code as you receive it, in any medium,
provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and
disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of any warranty; and
distribute a copy of this License along with the Library.
When we speak of free software, we are referring to freedom of use, not price. Our General Public Licenses are designed
to make sure that you have the freedom to distribute copies of free software (and charge for this service if you wish);
that you receive source code or can get it if you want it; that you can change the software and use pieces of it in new
free programs; and that you are informed that you can do these things.
a) Accompany the work with the complete corresponding machine-readable source code for the Library including
whatever changes were used in the work (which must be distributed under Sections 1 and 2 above); and, if the work
is an executable linked with the Library, with the complete machine-readable "work that uses the Library", as object
code and/or source code, so that the user can modify the Library and then relink to produce a modified executable
containing the modified Library. (It is understood that the user who changes the contents of definitions files in the
Library will not necessarily be able to recompile the application to use the modified definitions.)
You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection
in exchange for a fee.
To protect your rights, we need to make restrictions that forbid distributors to deny you these rights or to ask you to
surrender these rights. These restrictions translate to certain responsibilities for you if you distribute copies of the library
or if you modify it.
2. You may modify your copy or copies of the Library or any portion of it, thus forming a work based on the Library, and
copy and distribute such modifications or work under the terms of Section 1 above, provided that you also meet all of
these conditions:
For example, if you distribute copies of the library, whether gratis or for a fee, you must give the recipients all the rights
that we gave you. You must make sure that they, too, receive or can get the source code. If you link other code with the
library, you must provide complete object files to the recipients, so that they can relink them with the library after
making changes to the library and recompiling it. And you must show them these terms so they know their rights.
b) Use a suitable shared library mechanism for linking with the Library. A suitable mechanism is one that (1) uses at
run time a copy of the library already present on the user's computer system, rather than copying library functions
into the executable, and (2) will operate properly with a modified version of the library, if the user installs one, as
long as the modified version is interface-compatible with the version that the work was made with.
a) The modified work must itself be a software library.
b) You must cause the files modified to carry prominent notices stating that you changed the files and the date of any
change.
We protect your rights with a two-step method: (1) we copyright the library, and (2) we offer you this license, which
gives you legal permission to copy, distribute and/or modify the library.
c) Accompany the work with a written offer, valid for at least three years, to give the same user the materials specified
in Subsection 6a, above, for a charge no more than the cost of performing this distribution.
c) You must cause the whole of the work to be licensed at no charge to all third parties under the terms of this License.
To protect each distributor, we want to make it very clear that there is no warranty for the free library. Also, if the library
is modified by someone else and passed on, the recipients should know that what they have is not the original version,
so that the original author's reputation will not be affected by problems that might be introduced by others.
d) If a facility in the modified Library refers to a function or a table of data to be supplied by an application program
that uses the facility, other than as an argument passed when the facility is invoked, then you must make a good
faith effort to ensure that, in the event an application does not supply such function or table, the facility still
operates, and performs whatever part of its purpose remains meaningful.
d) If distribution of the work is made by offering access to copy from a designated place, offer equivalent access to
copy the above specified materials from the same place.
Finally, software patents pose a constant threat to the existence of any free program. We wish to make sure that a
company cannot effectively restrict the users of a free program by obtaining a restrictive license from a patent holder.
Therefore, we insist that any patent license obtained for a version of the library must be consistent with the full freedom
of use specified in this license.
e) Verify that the user has already received a copy of these materials or that you have already sent this user a copy.
(For example, a function in a library to compute square roots has a purpose that is entirely well-defined
independent of the application. Therefore, Subsection 2d requires that any application-supplied function or table
used by this function must be optional: if the application does not supply it, the square root function must still
compute square roots.)
For an executable, the required form of the "work that uses the Library" must include any data and utility programs
needed for reproducing the executable from it. However, as a special exception, the materials to be distributed need
not include anything that is normally distributed (in either source or binary form) with the major components
(compiler, kernel, and so on) of the operating system on which the executable runs, unless that component itself
accompanies the executable.
Most GNU software, including some libraries, is covered by the ordinary GNU General Public License. This license, the
GNU Lesser General Public License, applies to certain designated libraries, and is quite different from the ordinary
General Public License. We use this license for certain libraries in order to permit linking those libraries into non-free
programs.
These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from
the Library, and can be reasonably considered independent and separate works in themselves, then this License, and
its terms, do not apply to those sections when you distribute them as separate works. But when you distribute the
same sections as part of a whole which is a work based on the Library, the distribution of the whole must be on the
terms of this License, whose permissions for other licensees extend to the entire whole, and thus to each and every
part regardless of who wrote it.
It may happen that this requirement contradicts the license restrictions of other proprietary libraries that do not
normally accompany the operating system. Such a contradiction means you cannot use both them and the Library
together in an executable that you distribute.
When a program is linked with a library, whether statically or using a shared library, the combination of the two is legally
speaking a combined work, a derivative of the original library. The ordinary General Public License therefore permits
such linking only if the entire combination fits its criteria of freedom. The Lesser General Public License permits more lax
criteria for linking other code with the library.
7. You may place library facilities that are a work based on the Library side-by-side in a single library together with other
library facilities not covered by this License, and distribute such a combined library, provided that the separate
distribution of the work based on the Library and of the other library facilities is otherwise permitted, and provided
that you do these two things:
Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the
intent is to exercise the right to control the distribution of derivative or collective works based on the Library.
We call this license the "Lesser" General Public License because it does Less to protect the user's freedom than the
ordinary General Public License. It also provides other free software developers Less of an advantage over competing
non-free programs. These disadvantages are the reason we use the ordinary General Public License for many libraries.
However, the Lesser license provides advantages in certain special circumstances.
In addition, mere aggregation of another work not based on the Library with the Library (or with a work based on the
Library) on a volume of a storage or distribution medium does not bring the other work under the scope of this
License.
a) Accompany the combined library with a copy of the same work based on the Library, uncombined with any other
library facilities. This must be distributed under the terms of the Sections above.
b) Give prominent notice with the combined library of the fact that part of it is a work based on the Library, and
explaining where to find the accompanying uncombined form of the same work.
For example, on rare occasions, there may be a special need to encourage the widest possible use of a certain library, so
that it becomes a de-facto standard. To achieve this, non-free programs must be allowed to use the library. A more
frequent case is that a free library does the same job as widely used non-free libraries. In this case, there is little to gain
by limiting the free library to free software only, so we use the Lesser General Public License.
3. You may opt to apply the terms of the ordinary GNU General Public License instead of this License to a given copy of
the Library. To do this, you must alter all the notices that refer to this License, so that they refer to the ordinary GNU
General Public License, version 2, instead of to this License. (If a newer version than version 2 of the ordinary GNU
General Public License has appeared, then you can specify that version instead if you wish.) Do not make any other
change in these notices.
8. You may not copy, modify, sublicense, link with, or distribute the Library except as expressly provided under this
License. Any attempt otherwise to copy, modify, sublicense, link with, or distribute the Library is void, and will
automatically terminate your rights under this License. However, parties who have received copies, or rights, from
you under this License will not have their licenses terminated so long as such parties remain in full compliance.
In other cases, permission to use a particular library in non-free programs enables a greater number of people to use a
large body of free software. For example, permission to use the GNU C Library in non-free programs enables many more
people to use the whole GNU operating system, as well as its variant, the GNU/Linux operating system.
Once this change is made in a given copy, it is irreversible for that copy, so the ordinary GNU General Public License
applies to all subsequent copies and derivative works made from that copy.
9. You are not required to accept this License, since you have not signed it. However, nothing else grants you
permission to modify or distribute the Library or its derivative works. These actions are prohibited by law if you do not
accept this License. Therefore, by modifying or distributing the Library (or any work based on the Library), you
indicate your acceptance of this License to do so, and all its terms and conditions for copying, distributing or
modifying the Library or works based on it.
Although the Lesser General Public License is Less protective of the users' freedom, it does ensure that the user of a
program that is linked with the Library has the freedom and the wherewithal to run that program using a modified
version of the Library.
This option is useful when you wish to copy part of the code of the Library into a program that is not a library.
4. You may copy and distribute the Library (or a portion or derivative of it, under Section 2) in object code or executable
form under the terms of Sections 1 and 2 above provided that you accompany it with the complete corresponding
machine-readable source code, which must be distributed under the terms of Sections 1 and 2 above on a medium
customarily used for software interchange.
The precise terms and conditions for copying, distribution and modification follow. Pay close attention to the difference
between a "work based on the library" and a "work that uses the library". The former contains code derived from the
library, whereas the latter must be combined with the library in order to run.
10. Each time you redistribute the Library (or any work based on the Library), the recipient automatically receives a
license from the original licensor to copy, distribute, link with or modify the Library subject to these terms and
conditions. You may not impose any further restrictions on the recipients' exercise of the rights granted herein. You
are not responsible for enforcing compliance by third parties with this License.
If distribution of object code is made by offering access to copy from a designated place, then offering equivalent access to
copy the source code from the same place satisfies the requirement to distribute the source code, even though third parties
are not compelled to copy the source along with the object code.
5. A program that contains no derivative of any portion of the Library, but is designed to work with the Library by being
compiled or linked with it, is called a "work that uses the Library". Such a work, in isolation, is not a derivative work of
the Library, and therefore falls outside the scope of this License.
2
LICENSE
11. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to
patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the
conditions of this License, they do not excuse you from the conditions of this License. If you cannot distribute so as
to satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a
consequence you may not distribute the Library at all. For example, if a patent license would not permit royalty-free
redistribution of the Library by all those who receive copies directly or indirectly through you, then the only way you
could satisfy both it and this License would be to refrain entirely from distribution of the Library.
Yoyodyne, Inc., hereby disclaims all copyright interest in the library `Frob' (a library for tweaking knobs) written by
James Random Hacker.
•
Redistribution in binary form must provide a disclaimer that states that the software is based in part of the work of
the FreeType Team, in the distribution documentation. We also encourage you to put an URL to the FreeType
web page in your documentation, though this isn't mandatory.
<signature of Ty Coon>, 1 April 1990
Ty Coon, President of Vice
These conditions apply to any software derived from or based on the FreeType Project, not just the unmodified files.
If you use our work, you must acknowledge us. However, no fee need be paid to us.
That's all there is to it!
3. Advertising
If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the
section is intended to apply, and the section as a whole is intended to apply in other circumstances.
Neither the FreeType authors and contributors nor you shall use the name of the other for commercial, advertising, or
promotional purposes without specific prior written permission.
Exhibit C
It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest
validity of any such claims; this section has the sole purpose of protecting the integrity of the free software
distribution system which is implemented by public license practices. Many people have made generous
contributions to the wide range of software distributed through that system in reliance on consistent application of
that system; it is up to the author/donor to decide if he or she is willing to distribute software through any other
system and a licensee cannot impose that choice.
Free Type
We suggest, but do not require, that you use one or more of the following phrases to refer to this software in your
documentation or advertising materials: `FreeType Project', `FreeType Engine', `FreeType library', or `FreeType
Distribution'.
The FreeType Project LICENSE
2006-Jan-27
As you have not signed this license, you are not required to accept it. However, as the FreeType Project is copyrighted
material, only this license, or another one contracted with the authors, grants you the right to use, distribute, and
modify it. Therefore, by using, distributing, or modifying the FreeType Project, you indicate that you understand and
accept all the terms of this license.
Copyright 1996-2002, 2006 by
David Turner, Robert Wilhelm, and Werner Lemberg
This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License.
Introduction
12. If the distribution and/or use of the Library is restricted in certain countries either by patents or by copyrighted
interfaces, the original copyright holder who places the Library under this License may add an explicit geographical
distribution limitation excluding those countries, so that distribution is permitted only in or among countries not
thus excluded. In such case, this License incorporates the limitation as if written in the body of this License.
4. Contacts
The FreeType Project is distributed in several archive packages; some of them may contain, in addition to the
FreeType font engine, various tools and contributions which rely on, or relate to, the FreeType Project.
There are two mailing lists related to FreeType:
This license applies to all files found in such packages, and which do not fall under their own explicit license. The
license affects thus the FreeType font engine, the test programs, documentation and makefiles, at the very least.
13. The Free Software Foundation may publish revised and/or new versions of the Lesser General Public License from
time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new
problems or concerns.
•
•
Discusses general use and applications of FreeType, as well as future and wanted additions to the library and
distribution. If you are looking for support, start in this list if you haven't found anything to help you in the
documentation.
Discusses bugs, as well as engine internals, design issues, specific licenses, porting, etc.
This license was inspired by the BSD, Artistic, and IJG (Independent JPEG Group) licenses, which all encourage
inclusion and use of free software in commercial and freeware products alike. As a consequence, its main points are
that:
Each version is given a distinguishing version number. If the Library specifies a version number of this License which
applies to it and "any later version", you have the option of following the terms and conditions either of that version
or of any later version published by the Free Software Foundation. If the Library does not specify a license version
number, you may choose any version ever published by the Free Software Foundation.
•
•
•
We don't promise that this software works. However, we will be interested in any kind of bug reports. (`as is'
distribution)
You can use this software for whatever you want, in parts or full form, without having to pay us. (`royalty-free'
usage)
You may not pretend that you wrote this software. If you use it, or only parts of it, in a program, you must
acknowledge somewhere in your documentation that you have used the FreeType code. (`credits')
Our home page can be found at
14. If you wish to incorporate parts of the Library into other free programs whose distribution conditions are
incompatible with these, write to the author to ask for permission. For software which is copyrighted by the Free
Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our decision
will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting
the sharing and reuse of software generally.
LibJPEG
In plain English:
We specifically permit and encourage the inclusion of this software, with or without modifications, in commercial
products. We disclaim all warranties covering The FreeType Project and assume no liability related to The FreeType
Project.
NO WARRANTY
1. We don't promise that this software works. (But if you find any bugs, please let us know!)
2. You can use this software for whatever you want. You don't have to pay us.
3. You may not pretend that you wrote this software. If you use it in a program, you must acknowledge somewhere in
your documentation that you've used the IJG code.
15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE LIBRARY, TO THE EXTENT
PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/
OR OTHER PARTIES PROVIDE THE LIBRARY "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR
IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE LIBRARY IS WITH YOU.
SHOULD THE LIBRARY PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR
CORRECTION.
Finally, many people asked us for a preferred form for a credit/disclaimer to use in compliance with this license. We
thus encourage you to use the following text:
"""
In legalese:
Portions of this software are copyright© <year> The FreeType Project (www.freetype.org). All rights reserved.
"""
The authors make NO WARRANTY or representation, either express or implied, with respect to this software, its quality,
accuracy, merchantability, or fitness for a particular purpose. This software is provided "AS IS", and you, its user, assume
the entire risk as to its quality and accuracy.
Please replace <year> with the value from the FreeType version you actually use.
16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR
ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE, BE LIABLE TO
YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT
OF THE USE OR INABILITY TO USE THE LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING
RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE LIBRARY TO
OPERATE WITH ANY OTHER SOFTWARE), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.
This software is copyright (C) 1991-1998, Thomas G. Lane.
All Rights Reserved except as specified below.
Legal Terms
0. Definitions
Permission is hereby granted to use, copy, modify, and distribute this software (or portions thereof) for any purpose,
without fee, subject to these conditions:
(1) If any part of the source code for this software is distributed, then this README file must be included, with this
copyright and no-warranty notice unaltered; and any additions, deletions, or changes to the original files must be
clearly indicated in accompanying documentation.
Throughout this license, the terms `package', `FreeType Project', and `FreeType archive' refer to the set of files
originally distributed by the authors (David Turner, Robert Wilhelm, and Werner Lemberg) as the `FreeType Project',
be they named as alpha, beta or final release.
END OF TERMS AND CONDITIONS
(2) If only executable code is distributed, then the accompanying documentation must state that "this software is based
in part on the work of the Independent JPEG Group".
(3) Permission for use of this software is granted only if the user accepts full responsibility for any undesirable
consequences; the authors accept NO LIABILITY for damages of any kind.
`You' refers to the licensee, or person using the project, where `using' is a generic term including compiling the
project's source code as well as linking it to form a `program' or `executable'. This program is referred to as `a program
using the FreeType engine'.
How to Apply These Terms to Your New Libraries
If you develop a new library, and you want it to be of the greatest possible use to the public, we recommend making it
free software that everyone can redistribute and change. You can do so by permitting redistribution under these terms
(or, alternatively, under the terms of the ordinary General Public License).
This license applies to all files distributed in the original FreeType Project, including all source code, binaries and
documentation, unless otherwise stated in the file in its original, unmodified form as distributed in the original
archive. If you are unsure whether or not a particular file is covered by this license, you must contact us to verify this.
These conditions apply to any software derived from or based on the IJG code, not just to the unmodified library. If you
use our work, you ought to acknowledge us.
To apply these terms, attach the following notices to the library. It is safest to attach them to the start of each source file
to most effectively convey the exclusion of warranty; and each file should have at least the "copyright" line and a
pointer to where the full notice is found.
Permission is NOT granted for the use of any IJG author's name or company name in advertising or publicity relating to
this software or products derived from it. This software may be referred to only as "the Independent JPEG Group's
software".
The FreeType Project is copyright (C) 1996-2000 by David Turner, Robert Wilhelm, and Werner Lemberg. All rights
reserved except as specified below.
<one line to give the library's name and a brief idea of what it does.>
Copyright (C) <year> <name of author>
1. No Warranty
We specifically permit and encourage the use of this software as the basis of commercial products, provided that all
warranty or liability claims are assumed by the product vendor.
THE FREETYPE PROJECT IS PROVIDED `AS IS' WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED,
INCLUDING, BUT NOT LIMITED TO, WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
IN NO EVENT WILL ANY OF THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY DAMAGES CAUSED BY THE
USE OR THE INABILITY TO USE, OF THE FREETYPE PROJECT.
This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public
License as published by the Free Software Foundation; either version 2.1 of the License, or (at your option) any later
version.
This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied
warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License
for more details.
2. Redistribution
This license grants a worldwide, royalty-free, perpetual and irrevocable right and license to use, execute, perform,
compile, display, copy, create derivative works of, distribute and sublicense the FreeType Project (in both source and
object code forms) and derivative works thereof for any purpose; and to authorize others to exercise some or all of the
rights granted herein, subject to the following conditions:
You should have received a copy of the GNU Lesser General Public License along with this library; if not, write to the
Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
Also add information on how to contact you by electronic and paper mail.
•
Redistribution of source code must retain this license file (`FTL.TXT') unaltered; any additions, deletions or
changes to the original files must be clearly indicated in accompanying documentation. The copyright notices of
the unaltered, original files must be preserved in all copies of source files.
You should also get your employer (if you work as a programmer) or your school, if any, to sign a "copyright disclaimer"
for the library, if necessary. Here is a sample; alter the names:
3
LICENSE
Open SSL
License Information for the Software Used in the Unit
OpenSSL License
/*
About GPL (GNU-General Public License), LGPL (GNU
Lesser General Public License) License
Copyright (c) 1998-2008 The OpenSSL Project. All rights reserved.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the
following conditions are met:
1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following
disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following
disclaimer in the documentation and/or other materials provided with the distribution.
3. All advertising materials mentioning features or use of this software must display the following acknowledgment:
"This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit. (http://
www.openssl.org/)"
This product uses GPL/LGPL software and software made by other companies. After you purchase this product, you
may procure, modify or distribute the source code of the GPL/LGPL software that is used in the product. DENON
provides the source code based on the GPL and LGPL licenses at the actual cost upon your request to our
customer service center. However, note that we make no guarantees concerning the source code. Please also
understand that we do not offer support for the contents of the source code.
4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to endorse or promote products derived from
this software without prior written permission. For written permission, please contact [email protected].
5. Products derived from this software may not be called "OpenSSL" nor may "OpenSSL" appear in their names without
prior written permission of the OpenSSL Project.
6. Redistributions of any form whatsoever must retain the following acknowledgment:
"This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit (http://
www.openssl.org/)"
THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY EXPRESSED OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR ITS CONTRIBUTORS BE LIABLE FOR ANY
DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
This product includes cryptographic software written by Eric Young ([email protected]). This product includes
software written by Tim Hudson ([email protected]).
*/
Original SSLeay License
/* Copyright (C) 1995-1998 Eric Young ([email protected]) All rights reserved.
This package is an SSL implementation written by Eric Young ([email protected]).
The implementation was written so as to conform with Netscapes SSL.
This library is free for commercial and non-commercial use as long as the following conditions are adhered to. The
following conditions apply to all code found in this distribution, be it the RC4, RSA, lhash, DES, etc., code; not just the
SSL code. The SSL documentation included with this distribution is covered by the same copyright terms except that
the holder is Tim Hudson ([email protected]).
Copyright remains Eric Young's, and as such any Copyright notices in the code are not to be removed.
If this package is used in a product, Eric Young should be given attribution as the author of the parts of the library used.
This can be in the form of a textual message at program startup or in documentation (online or textual) provided with
the package.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the
following conditions are met:
1. Redistributions of source code must retain the copyright notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following
disclaimer in the documentation and/or other materials provided with the distribution.
3. All advertising materials mentioning features or use of this software must display the following acknowledgement:
"This product includes cryptographic software written by Eric Young ([email protected])"
The word 'cryptographic' can be left out if the routines from the library being used are not cryptographic related :-).
4. If you include any Windows specific code (or a derivative thereof) from the apps directory (application code) you
must include an acknowledgement:
"This product includes software written by Tim Hudson ([email protected])"
THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
The licence and distribution terms for any publically available version or derivative of this code cannot be changed. i.e.
this code cannot simply be copied and put under another distribution licence [including the GNU Public Licence.]
*/
4
LICENSE
Denon Brand Company, D&M Holdings Inc.
E5KC1UD / 1VMN27754B ★★
Printed in China
5411 10285 308D
|