Toshiba BDX2150KU User Manual

Blu-ray Disc™/DVD Player  
BDX2150KU/BDK21KU  
Owner’s Manual  
Important Safety Information  
the provided plug does not fit into your outlet, consult  
an electrician for replacement of the obsolete outlet.  
10. Protect the power cord from being walked on or pinched  
particularly at plugs, convenience receptacles, andthe  
point where they exit from the apparatus.  
SAFETY PRECAUTIONS  
11. Only use attachments/accessories specified by the  
manufacturer.  
12. Use only with the cart, stand, tripod, bracket,  
or table specified by the manufacturer, or  
sold with the apparatus. When a cart is  
CAUTION: VISIBLE LASER RADIATION WHEN  
OPEN. DO NOT STARE INTO BEAM.  
used, use caution when moving the cart/  
apparatus combination to avoid injury from tip-over.  
13. Unplug this apparatus during lightning storms or when  
unused for long periods of time.  
AVIS  
14. Refer all servicing to qualified service personnel.  
Servicing is required when the apparatus has been  
damaged in any way, such as the power-supply cord  
or plug is damaged, liquid has been spilled or objects  
have fallen into the apparatus, the apparatus has been  
exposed to rain or moisture, does not operate normally,  
WARNING:TO REDUCE THE RISK OF ELECTRIC  
SHOCK, DO NOT REMOVE COVER (OR BACK).  
NO USER-SERVICEABLE PARTS INSIDE. REFER  
SERVICING TO QUALIFIED SERVICE PERSONNEL.  
The lightning flash with an arrowhead symbol,  
within the equilateral triangle, is intended to  
alert the user to the presence of uninsulated  
“dangerous voltage” within the product’s  
enclosure that may be of sufficient magnitude to  
constitute a risk of electric shock to persons.  
or has been dropped.  
ADDITIONAL SAFETY INSTRUCTIONS  
15. Do not overload wall outlets;extension cords, or integral  
convenience receptacles as this can result in a risk of  
fire or electric shock.  
16. Never expose the apparatus to dripping or splashing or  
place items such as vases, aquariums, any other item  
filled with liquid, or candles on top of the unit.  
17. Keep your fingers well clear of the disc tray as it is  
closing.Neglecting to do so may cause serious personal  
injury.  
The exclamation point within the equilateral  
triangle is intended to alert the user to  
the presence of important operating and  
maintenance (servicing) instructions in this  
owner’s manual.  
WARNING: TO REDUCE THE RISK OF FIRE OR  
ELECTRIC SHOCK, DO NOT EXPOSETHIS APPLIANCE  
TORAINORMOISTURE.DANGEROUSHIGHVOLTAGES  
ARE PRESENT INSIDE THE ENCLOSURE. DO  
NOT OPEN THE CABINET. REFER SERVICING TO  
QUALIFIED PERSONNEL ONLY.  
18. Do not place anything on top of this unit.  
19. Do not place the apparatus on amplifiers or equipment  
that may produce heat.  
20. Never block or cover the slots or openings in the unit.  
Never place the unit: 1) on a bed, sofa, rug or similar  
surface; 2) too close to drapes, curtains, or walls; or 3)  
in a confined space such as a bookcase, built-in cabinet,  
or any other place with poor ventilation.  
The symbol for Class II  
(Double lnsulation)  
The slots and openings are provided to protect the  
unit from overheating and to help maintain reliable  
operation.  
21. Do not use a cracked, deformed, or repaired disc.These  
discs are easily broken and may cause serious personal  
injury and apparatus malfunction.  
IMPORTANT SAFETY INSTRUCTIONS  
1. Read these instructions.  
2. Keep these instructions.  
3. Heed all warnings.  
4. Follow all instructions.  
5. Do not use this apparatus near water.  
6. Clean only with a dry cloth.  
7. Do not block any of the ventilation openings. Install in  
accordance with the manufacturer’s instructions.  
8. Do not install near any heat sources such as radiators,  
heat registers, stoves, or other apparatus (including  
amplifiers) that produce heat.  
9. Do not defeat the safety purpose of the polarized or  
grounding-type plug. A polarized plug has two blades  
with one wider than the other. A grounding type plug  
has two blades and a third grounding prong.The wide  
blade or the third prong is provided for your safety. If  
22. If the apparatus should emit smoke or an unusual odor,  
immediately disconnect the power cord from the wall  
outlet. Wait until the smoke or smell stops, then ask  
your dealer for a check and repair. Neglecting to do so  
may cause fire.  
23. During thunderstorms, do not touch the connecting  
cables or the apparatus.  
24. Warning:To prevent spread of fire, keep candles or other  
open flames away from this product at all times.  
25. Mains plug is used as disconnect device and it should  
remain readily operable during intended use. In order  
to disconnect the apparatus from the mains completely,  
the mains plug should be disconnected form the mains  
socket outlet completely.  
3
Important Safety Information  
CAUTION:  
On Placement  
To prevent direct exposure to laser beam, do not try to  
open the enclosure.Visible and invisible laser radiation  
when open and interlocks defeated. DO NOT STARE  
INTO BEAM.  
Do not use this unit in places which are extremely hot,  
cold, dusty or humid.  
Do not restrict the air flow of this unit by placing it  
somewhere with poor air flow, by covering it with a  
cloth, or by placing it on bedding or carpeting.  
Be sure to remove the disc and unplug the AC power  
cord from the outlet before carrying the unit.  
Use of controls or adjustments or performance of  
procedures other than those specified may result in  
hazardous radiation exposure.  
Danger of explosion if battery is incorrectly replaced.  
Replace only with the same or equivalent type.  
On Safety  
Do not handle the AC power cord with wet hands and  
do not put your fingers or objects into the unit.  
When connecting or disconnecting the AC power  
cord, grip the plug and not the cord itself. Pulling the  
cord may damage it and create a hazard.  
Warning: Batteries shall not be exposed to excessive heat  
such as sunshine, fire or the like.  
FCC Information  
This device complies with Part 15 of the FCC Rules.  
Operation is subject to the following two conditions:(1) this  
device may not cause harmful interference, and (2) this  
device must accept any interference received, including  
interference that may cause undesired operation.  
The party responsible for compliance to these rules is:  
Toshiba America Information Systems, Inc.  
When you are not going to use the unit for a long  
period of time, disconnect the AC power cord.  
On Condensation  
When left in a heated room where it is warm and  
damp, water droplets or condensation may form  
inside the equipment. When there is condensation  
inside the unit, the unit may not function normally. Let  
the unit stand for 1-2 hours before turning the power  
on or gradually heat the room and allow the unit to dry  
before use.  
9740 Irvine Blvd., Irvine, CA 92618.  
Ph: 1-800-631-3811  
Note:This equipment has been tested and found to comply  
with the limits for a Class B digital device, pursuant to part  
15 of the FCC Rules.These limits are designed to provide  
reasonable protection against harmful interference in a  
residential installation. This equipment generates, uses,  
and can radiate radio frequency energy and, if not installed  
and used in accordance with the instructions, may cause  
harmful interference to radio communications.  
However, there is no guarantee that interference will not  
occur in a particular installation. If this equipment does  
cause harmful interference to radio or television reception,  
which can be determined by turning the equipment off and  
on, the user is encouraged to try to correct the interference  
by one or more of the following measures:  
On Recycling  
This unit’s packaging materials are  
recyclable and can be reused. Please  
dispose of any materials in accordance  
with your local recycling regulations.  
Batteries should never be thrown away  
or incinerated but disposed of in accordance with your  
local regulations concerning chemical wastes.  
Products that earn the ENERGY STAR®  
prevent greenhouse gas emissions by  
meeting strict energy efficiency guidelines  
set by the U.S. Environmental Protection  
Agency and the U.S. Department of Energy.  
ENERGY STAR and the ENERGY STAR  
mark are registered U.S. marks.  
-
-
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and  
receiver.  
-
-
Connect the equipment into an outlet on a circuit  
different from that to which the receiver is connected.  
Consult the dealer or an experienced radio/TV  
technician for help.  
FCC Radiation Exposure Statement:  
This equipment complies with FCC radiation exposure  
limits set forth for an uncontrolled environment.  
This equipment should be installed and operated with  
minimum distance 20cm between the radiator and your  
body.  
This class B digital apparatus complies with Canadian  
ICES-003.  
Cet appareil numérique de la classe B est conforme à  
la norme NMB-003 du Canada.  
WARNING: Changes or modifications to this unit not  
expressly approved by Toshiba, or parties authorized by  
Toshiba, could void the user’s authority to operate the  
equipment.  
4
Supplied Accessories  
Remote Control with Batteries (AAA x 2) .............. x 1  
Owner’s Manual..................................................... x 1  
Quick Start Guide.................................................. x 1  
“DVD” is a trademark of DVD Format / Logo Licensing  
Corporation.  
HDMI Cable(only included for BDK21KU model) .. x 1  
Symbols Used in this Manual  
x.v.Color and x.v.Color logo are registered trade-  
marks of Sony Corporation.  
To specify for which media type each function is, we put  
the following symbols at the beginning of each item to  
operate.  
Symbol  
Description  
“AVCHD” and the “AVCHD” logo are trademarks of  
Panasonic Corporation and Sony Corporation.  
Description refers to BD-video and BD-  
RE / BD-R recorded in BDMV format  
Description refers to DVD-video  
Description refers to Audio CD / DTS-CD  
HDMI, the HDMI logo, and High-Definition Multimedia  
Interface are trademarks or registered trademarks of  
HDMI Licensing LLC in the United States and other  
countries.  
Description refers to DVD-RW/-R with  
AVCHD files  
Description refers to BD-RE/-R, DVD-  
RW/-R and CD-RW/-R  
Description refers to BD-RE/-R, DVD-  
RW/-R and CD-RW/-R  
Description refers to BD-RE/-R, DVD-  
RW/-R and CD-RW/-R  
Blu-ray  
Disc™,  
Blu-ray™,  
BD-Live™  
and  
If you do not find any of the symbols listed above under  
the function heading, the operation is applicable to all  
media.  
BONUSVIEW™ and the logos are trademarks of the  
Blu-ray Disc Association.  
Trademark Information  
BLOCKBUSTER name, design and related marks are  
trademarks of Blockbuster L.L.C. © All rights reserved.  
Netflix is a registered trademark of Netflix Inc.  
VUDU is a trademark of VUDU, Inc.  
CinemaNow is a registered trademark of Best Buy, Inc.  
YouTube is a registered trademark of Google, Inc.  
Pandora is a registered trademark of Pandora Media,  
Inc.  
Manufactured under license from Dolby Laboratories.  
Dolby, Pro Logic and the double-D symbol are  
trademarks of Dolby Laboratories.  
Picasa is a trademark of Google, Inc.  
Windows Media and theWindows logo are trademarks  
or registered trademarks of Microsoft Corporation in  
the United States and/or other countries.  
Manufactured under license under U.S. Patent  
Nos: 5,956,674; 5,974,380; 6,226,616; 6,487,535;  
7,392,195; 7,272,567; 7,333,929; 7,212,872 & other  
U.S. and worldwide patents issued & pending. DTS-  
HD, the Symbol, & DTS-HD and the Symbol together  
are registered trademarks & DTS-HD Master Audio  
Oracle and Java are registered  
trademarks of Oracle and/or its  
affiliates. Other names may be  
trademarks of their respective  
owners.  
|
includes software. © DTS, Inc. All Rights Reserved.  
Essential is  
a
trademark of DTS, Inc. Product  
5
Features  
Blu-ray Disc™  
x.v.Color®  
You can enjoy Blu-ray Disc™ which is capable of storing  
five times more data than a conventional DVD.  
This unit supports playback of video contents on discs  
recorded with “x.v.Color” technology. To watch this video  
content with the “x.v.Color”, a TV or other display device  
supporting both video image reproduction using the  
“x.v.Color” standard and capable of manually switching its  
color setting is required.Please refer to the owner’s manual  
of your display device for further information.  
BD-Java  
With some Blu-ray Disc™ which support Java applications,  
you can enjoy the interactive functions such as games or  
interactive menus.  
Easy and simple connection to your HDTV via  
HDMI®  
BD-Live™  
BD-Live™ (BD-ROM version 2 Profile 2.0) that allows  
interactive functions to be used when this unit is connected  
to the Internet in addition to the BONUSVIEW function.The  
various functions differ depending on the disc.  
Connect this unit to your HDTV with one single HDMI (High-  
Definition Multimedia Interface) cable. It is recommended  
to use a High Speed HDMI Cable for better compatibility.  
The high definition video output signal will be transferred  
to your HDTV without conversion to analog signals, so you  
will get excellent picture and sound quality.  
Full high-definition video playback  
Watch movies in the highest picture quality available  
for your HDTV. This unit offers full high-definition video  
playback up to 1080p resolution for an amazing viewing  
experience. A highly detailed picture and increased  
sharpness delivers a more true-to-life picture.  
Thanks to other multiple outputs, you can also easily  
connect to your home theater system or amplifier.  
HDMI® CEC (Consumer Electronics Control)  
This unit supports HDMI CEC, which allows integrated  
system control over HDMI and is part of the HDMI  
standard.  
DVD Upconversion for enhanced picture quality  
Your current DVD will look even better than before thanks  
to video upconversion. Upconversion will increase the  
resolution of standard definition DVD to high definition up  
to 1080p over an HDMI connection. The picture will be  
less jagged and more realistic for a near high-definition  
experience.  
This function may not work properly on some devices.  
HDMI 1080p/24F output (Blu-ray Disc™ only)  
This unit is equipped with a feature which can provide  
the smooth movement in the playback of film originated  
material with the frame rate of 24 frames per second with  
progressive scan.(Available only when theTV is connected  
by an HDMI cable and compatible with 1080p/24F frame  
input.)  
Enjoy your content on different kinds of media  
Full backwards compatibility with Blu-ray Disc™, DVD and  
CD ensures that you can continue to enjoy your current  
audio-video collection. Additionally, you can view JPEG  
digital pictures or listen to MP3 or Windows Media™  
Audio music files.  
Copyright protection system  
To play back the digital video images of a Blu-ray Disc™  
/ DVD via an HDMI connection, it is necessary that  
both the unit and the TV (or an AV amplifier) support  
a copyright protection system called HDCP (high-  
bandwidth digital content protection system). HDCP is  
copy protection technology that comprises data encryption  
and authentication of the connected AV device. This unit  
supports HDCP. Please read the operating instructions of  
your TV (or AV amplifier) for more information.  
PIP (BONUSVIEW™)  
Some BD-videos have the PIP function which enables you  
to display the secondary video in the primary video. You  
can call up the secondary video by pressingBONUSVIEW  
whenever the scene contains the secondary video.  
Pop-up menu  
Some BD-video have pop-up menu which is a navigation  
menu that can be called up and be operated on the TV  
screen without interrupting the playback.You can call up the  
pop-up menu by pressing POP/TOP or MENU.Contents in  
the pop-up menu vary depending on the disc.  
Playing back AVCHD files  
This unit supports playback of AVCHD format files (new  
format for high definition video camcorders) recorded on  
disc. Your high definition personal archive is playable in  
HD quality.  
6
Identification of Controls  
Front Panel  
1
2
3 4  
5
6
7
1. Disc tray  
6. PLAY  
button  
2. Power indicator  
3. Remote sensor  
7. POWER button  
Press to turn on the unit, or to turn the unit into  
the standby mode. (To completely turn off the  
unit, you must unplug the AC power cord.)  
4. OPEN/CLOSE  
5. STOP button  
button  
Rear Panel  
1
2
3
4
5
1. AC power cord  
4. USB Port  
Use to connect a USB flash drive/wireless LAN  
adapter (not included).  
5. LAN terminal  
Use to connect a network equipment with LAN  
cable.  
Connect to a standard AC outlet to supply power  
to this unit.  
Unplug this cord from the AC outlet to completely  
turn off the unit.  
2. COAXIAL DIGITAL AUDIO OUT jack  
Use to connect an AV receiver / amplifier, Dolby  
Digital / DTS decoder or other device with a  
coaxial digital audio input jack using a coaxial  
digital audio cable.  
3. HDMI OUT jack  
Use to connect a TV with an HDMI compatible  
port via an HDMI cable.  
*
HDMI connection is required. Cables are  
not included for BDX2150KU model. Analog  
connection is not supported.  
7
Identification of Controls  
Remote Control  
No. Item  
Description  
POWER  
OPEN/CLOSE Press to open or close the disc  
tray.  
1
2
3
1
13  
14  
Press to display the search  
menu.  
GOTO  
During playback, press to fast  
reverse the playback.  
REV  
During playback, press once  
to return to the beginning  
of the current title, chapter,  
track or file.  
GOTO  
Clear  
2
15  
16  
HOME MENU MENU BONUS VIEW POP/TOP  
During playback, press twice  
to return to the previous title,  
chapter, track or file.  
4
SKIP  
REV  
PLAY  
STOP  
FWD  
During the JPEG playback,  
press to return to the previous  
file.  
17  
18  
19  
20  
3
4
5
SKIP  
SKIP  
INFO  
PAUSE  
STEP  
Press to pause playback.  
PAUSE  
STEP  
SLOW  
Press to advance one frame.  
Press to play back the disc in  
slow motion.  
5
SLOW  
INFO  
Press  
information.  
to  
display  
disc  
21  
OK  
Press to return to the previous  
menu.  
6
7
RETURN  
RETURN  
NETFLIX  
Press to turn random function  
on or off for Audio CD, MP3 or  
WMA disc.  
6
22  
23  
RANDOM  
ANGLE  
Press to select a viewing angle  
if multiple angles are available  
on the disc.  
RANDOM ANGLE  
PIC RESOLUTION  
8
7
8
9
10  
24  
25  
26  
27  
SUB AUDIO 2nd. SUB 2nd. AUDIO  
A-B REPEAT  
SUB  
Press to display the subtitle  
menu.  
9
(SUBTITLE)  
11  
12  
10  
AUDIO  
Use to select the audio mode.  
Press to play back a defined  
section between point A and B  
repeatedly.  
11  
12  
A-B  
SE-R0402  
Press to toggle between  
various repeat modes.  
REPEAT  
POWER  
Press to turn on the unit, or to  
turn the unit into the standby  
mode. (To completely turn off  
the unit, you must unplug the  
power cord.)  
13  
8
Identification of Controls  
No. Item  
Description  
In playback mode, use to adjust  
picture quality according to  
your preference (Actual effect  
to picture may vary depending  
on TV.):  
In playback mode, press  
GOTO, then press the  
number buttons to enter a  
title, chapter, track, time or  
file number.  
Number but-  
tons  
25  
PIC  
14  
15  
E.P.M (Enhanced Picture  
Mode):The picture is sharper  
with enhanced color.  
In menu mode, press to enter  
the parental code password.  
Sharpness  
CLEAR  
Press to clear an input error.  
In PIP mode, press to turn the  
audio for the secondary video  
on or off.  
Press to display the Connected  
in home menu.  
HOME MENU  
MENU  
26  
27  
2nd. AUDIO  
Press to display disc menu.  
In PIP mode, press to turn  
the subtitle for the secondary  
video on or off.  
2nd. SUB  
Press to switch picture-in-  
picture feature on or off (only  
applicable to BD-video which  
supports the PIP function).  
(SUBTITLE)  
BONUSVIEW  
16  
Installing batteries  
During  
Blu-ray  
playback, press to open  
Disc  
a
Install the batteries (AAAx2) matching the polarity indicated  
inside battery compartment of the remote control.  
menu that lets you control  
Blu-ray Disc playback.  
POP/TOP  
Open the cover.  
During DVD playback, press  
to open the DVD menu (if  
available).  
1
During playback, press to fast  
forward the playback.  
17  
18  
FWD  
Press to start playback or  
resume playback.  
PLAY  
Insert batteries.  
During playback, press to skip  
to the next title, chapter, track  
or file.  
2
19  
SKIP  
During the JPEG playback,  
press to go to the next file.  
20  
21  
Press to stop playback.  
STOP  
Make sure to match the + and – on the batteries to  
the marks indicated in the battery compartment.  
Press to select items or  
settings.  
/
/
/
Press to confirm or select  
menu items.  
Close the cover.  
OK  
3
Caution: Never throw batteries into a fire.  
Notes:  
Press to use Netflix service  
directly. (Make sure your Blu-  
ray Disc™ player is correctly  
connected to the internet and  
network settings are properly  
configured.)  
22  
NETFLIX  
Do not mix different battery types or combine used  
batteries with new ones.  
If the remote control does not operate correctly, or if  
the operating range becomes reduced, replace both  
batteries with new ones.  
Press to select items  
on some Blu-ray Disc™  
contents.  
RED / GREEN  
/ BLUE /YEL-  
LOW  
If the batteries are dead or if you will not be using the  
remote control for a long time, remove the batteries  
to prevent battery acid from leaking into the battery  
compartment.  
23  
24  
When file list / thumbnail list  
is shown, press to switch  
between pages.  
Press to select the video  
resolution in full stop mode.  
RESOLUTION  
9
Identification of Controls  
Operating with the remote control  
* Do not expose the remote sensor of the Blu-ray Disc™  
player to a strong light source such as direct sunlight  
or other illumination. If you do so, you may not be able  
to operate the Blu-ray Disc™ player via the remote  
control.  
Point the remote control at the remote sensor  
and press the buttons.  
Notes:  
Direct the remote control at the remote sensor of the  
Blu-ray Disc™ player.  
When using the remote control, press the buttons at  
intervals of about 1 second to ensure the correct mode  
of operation.  
POWER  
Do not drop or give the remote control a shock.  
Do not leave the remote control near an extremely hot  
or humid place.  
Do not spill water or put anything wet on the remote  
control.  
Distance: About 5 m from the front of the remote  
sensor.  
Do not open the remote control.  
Angle:  
About 30° in each direction of the front of the  
remote sensor.  
If the remote control is not going to be used for a long  
time, remove the battery to avoid damage caused by  
battery leakage corrosion.  
Connections  
Connecting to a TV using an HDMI® cable  
This connection provides better picture quality and supports up to 1080i/1080p, 1080p/24F resolution.  
Connect a HDMI cable from the HDMI output jack on this product to the HDMI input jack on the TV.  
High  
Definition  
TV  
HDMI Cable  
(only included for  
BDK21KU model)  
HDMI IN  
HDMI OUT  
Notes:  
HDMI connection is required. Cables are not included for BDX2150KU model. Analog connection is not  
supported.  
Do not tilt the connector when inserting it into the HDMI jack, and make sure the shapes of the jack and the  
connector are matched.  
When using a non-HDCP compatible TV, the image will not display properly.  
An HDMI cable carries both video and audio signals. If you want to use TV speakers, you do not need to make an  
additional audio connection if you are using an HDMI cable.  
10  
Connections  
Connecting to a digital amplifier/AV receiver  
Route the sound from this player to other device to enhance audio output.  
Connect a coaxial cable from the COAXIAL DIGITAL jack on this product to the COAXIAL jack on the device.  
If your AV receiver or amplifier has an HDMI jack, you can also connect the HDMI cable to HDMI IN jack on your AV  
receiver or amplifier.  
AV receiver / amplifier  
DIGITAL AUDIO INPUT  
COAXIAL  
digital audio coaxial cable  
(not included)  
Connecting to network  
Your Blu-ray Disc™ player can be connected to your home network:  
By connecting an Ethernet cable to the ETHERNET jack on the rear of your player and to a wired hub or router. Using  
a wired network provides the best performance, because the attached devices connect directly to the network and  
are not subject to radio frequency interference.  
Connecting your player to a wired router  
Connect an Ethernet cable (CAT5 or better with RJ45 connector) to the ETHERNET jack on the back of your player  
and to an Ethernet jack on a hub or broadband router.  
Hub or broadband router  
Networking equipment  
(modem, etc.)  
Notes:  
Do not connect a modular  
p h o n e c a bl e t o t h e  
ETHERNET jack.  
WAN  
LAN  
1
LAN  
When plugging or unplugging  
the cable, hold the connector  
on the end of the cable.  
When unplugging, do not  
pull on the cable.Press down  
the lock tab and pull the  
connector out of the jack.  
Because there are various  
connection configurations,  
follow the instructions from  
your telecommunication  
carrier or Internet service  
provider.  
5
4
3
2
LAN cable  
LAN cable  
Internet  
LAN  
11  
Connections  
Connecting your player to a wireless access point or router (Need the optional Wi-Fi unit which is sold  
separately)  
Your Blu-ray Disc™ player can also be connected to network with a Wireless access point.  
1. A wireless AP/IP router is required to make a wireless network connection. Connect the wireless LAN adapter to the  
USB port on the rear panel of the Blu-ray Disc™ Player, and set the wireless network options.  
2. After the Wi-Fi device is inserted into the USB port, press  
enter.  
(For detailed information, please refer to the user guide for WLM-10UB1 or WLM-10NB1.)  
/
to select “Network” from Settings, and press OK to  
Notes:  
This unit is compatible with TOSHIBA’s Wireless  
LAN Adapter only.  
Model name: WLM-10UB1 or WLM-10NB1  
You must use a wireless IP sharer that supports  
IEEE 802.11 a/b/g/n. (n is recommended for  
stable operation of the wireless network.)  
Wireless LAN, in its nature, may cause  
interference, depending on the use condition  
(AP performance, distance, obstacle, interference  
by other radio devices, etc.).  
USB  
Set the wireless IP sharer to Infrastructure mode.  
Ad-hoc mode is not supported.  
Wireless access point  
Modem Port  
When applying the security key for the AP  
(wireless IP sharer), only the following is  
supported.  
1) Authentication Mode : WPAPSK, WPA2PSK  
2) Encryption Type : WEP, TKIP, AES  
For models without built-in Wi-Fi®, BD-Live™  
is only supported via Ethernet so when using  
single USB port for internet access, BD-Live™  
will not be available.  
Wireless LAN  
Adapter  
Modem Cable  
Connecting a USB Flash Drive  
A USB flash drive provides an additional memory to  
software upgrade and enjoy BD-Live™ bonus content.  
You can also enjoy playing back MP3/WMA/JPEG files  
stored in the USB flash drive.  
Inserting a USB flash drive into the USB port on the back  
of Blu-ray Disc™ player until it clicks.  
Notes:  
Connect only a USB flash drive to the USB port on this product.  
If you cannot easily insert the USB flash drive, you may have  
inserted it incorrectly. Try to turnover the device and then insert  
again.  
USB  
Do not remove the USB flash drive during playback.  
BD-Live™: Access to BD-Live™ requires use of USB flash drive  
(not included) installed in the USB port.For additional information  
regarding the access to BD-Live™, see page 21 of the manual.  
TOSHIBA does not guarantee 100% compatibility with all USB  
flash drives.  
USB Flash Drive  
CAUTION: If you want to enjoy BD-Live™ bonus content, you should  
connect a USB flash drive to USB port, and an Ethernet cable to the  
ETHERNET jack on the back of your player and to an Ethernet jack on  
a hub or broadband router.  
12  
Playback  
Information on Playback  
Before you start playing back a disc, read the following  
information.  
Unplayable Discs and Files  
The following discs will not be played back in this unit.  
CD-ROM  
CD-I (compact disc-interactive)  
DVD-RAM  
VSD (video single disc)  
DVD-audio  
HD DVD  
VIDEO CD  
Unfinalized disc  
Playable Discs and Files  
This unit is compatible to play back the following discs  
/ files.  
To play back a disc / file, make sure that it meets the  
requirements for region codes and color systems as  
described below. You can play back discs that have the  
following logos.  
SACD  
Other disc types are not guaranteed to play back.  
Blu-ray Disc™ / DVD containing DivX® files.  
Blu-ray Disc™ / DVD hybrid disc (played back as a BD-  
video only)  
Playable discs  
Blu-ray Disc™  
Logos  
Blu-ray Disc™ that contains AVCHD files  
DVD-RW/-R recorded in non compatible recording  
format.  
Super Audio CD - Only the sound on the CD layer can  
be heard. The sound on the high-density Super Audio  
CD layer cannot be heard.  
Playability of dual discs are not guaranteed.  
Multi session disc  
Multi border disc  
- BD-ROM (single / dual layer)  
- BD-RE (single / dual layer)  
(Recorded in BDMV format)  
- BD-R (single / dual layer)(Re-  
corded in BDMV format) (Un-  
closed discs may not be played  
back.)  
DVD-ROM  
DVD-RW  
DVD-R  
Region Codes  
This unit has been designed to play back BD-video with  
region “A” and DVD-video with region “1” or “ALL. You  
cannot play back BD-video or DVD-video that are labeled  
for other regions.Look for the symbols on the right on your  
BD-video or DVD-video.  
If these region symbols do not appear on your BD-video  
or DVD-video, you cannot play back the disc in this unit.  
The letter or number inside the globe refers to region of  
the world. A BD-video or DVD-video labeled for a specific  
region can only be played back in the unit with the same  
region code.  
CD-DA (audio CD)  
CD-RW  
CD-R  
DTS-CD  
-
BD-video  
Playable files  
Media  
AVCHD  
DVD-RW/-R  
MP3  
DVD-video  
BD-RE/-R, DVD-  
RW/-R, CD-RW/-R  
Windows MediaTM Audio  
JPEG  
Color System  
BD-video and DVD-video are recorded in different color  
systems throughout the world. The most common color  
system is NTSC (which is used primarily in the United  
States and Canada).  
This unit cannot playback the disc contents protected  
by Windows Media™ Digital Rights Management  
(DRM).  
13  
Playback  
Structure of Disc Contents  
Place the disc on the disc tray.  
The contents of Blu-ray Disc™ / DVD / AVCHD are  
generally divided into titles. Titles may be further  
subdivided into chapters.  
3
With the playback side  
down  
TM  
Blu-ray Disc / DVD / AVCHD  
title 1 title 2  
chapter 1 chapter 2 chapter 1 chapter 2 chapter 3  
4 Press OPEN/CLOSE to close the disc tray.  
Playback starts.  
Audio CD is divided into tracks.  
If you insert a Blu-ray disc or a DVD that  
contains a top menu, a menu may appear. Use  
audio CD  
track 3  
track 1  
track 2  
track 4  
track 5  
/
then press OK to start playback.  
/
/
to select the title you want to view,  
You may need to press the POP/TOP or MENU  
button to display disc menu (depending on the  
actual Blu-ray disc or DVD.)  
Data discs or USB flash drives containing MP3 / WMA  
/JPEG are divided into folders, and the folders are  
subdivided into files.  
To start playback in stop mode  
Press PLAY.  
MP3 / WMA / JPEG  
folder (group) 2  
file 4  
folder (group) 1  
file 1  
To pause playback (still mode)  
file 2  
file 3  
file 5  
Press PAUSE during playback.  
To resume normal playback, press the PLAY button.  
• The sound is muted during still mode.  
To stop playback  
Press STOP. The home menu is displayed.  
For Blu-ray discs, press  
then press OK to start playback at the beginning of  
/
to select BD-ROM,  
the disc.  
Basic Playback  
Preparations  
For DVDs/audio CDs, press  
normal playback.  
PLAY to resume  
When you want to view a disc, turn on the TV and select  
the video input connected to the Blu-ray Disc™ player.  
• Depending on the disc, playback starts where it  
stopped or at the beginning of the disc.  
• If you press  
completely. To stat playback again, press  
Playback starts at the beginning of the disc.  
STOP twice, playback stops  
PLAY.  
CAUTION:  
Keep your fingers well clear of the disc tray as itis closing.  
Neglecting to do so may cause serious personal injury.  
To remove the disc  
Press OPEN/CLOSE.  
Remove the disc after the disc tray  
opens completely.  
Press the POWER button.  
1
POWER  
Be sure to press the OPEN/CLOSE  
button to close the disc tray after you  
remove the disc.  
The Blu-ray Disc™ player  
turns on.  
To turn the power off  
Press POWER button to turn the unit off.  
Press OPEN/CLOSE.  
2
The disc tray opens.  
14  
Playback  
Variable Speed Playback  
Locating a Desired Section  
You can play discs at various speeds, and resume playback  
from the location where you stopped playback.  
Normally, Blu-ray discs and DVDs are divided into titles,  
and the titles are sub-divided into chapters. Audio CDs  
are divided into tracks.You can quickly locate any specific  
title, chapter, or track.  
Playing in fast reverse / forward directions  
Locating a title using the pop/top menu  
Press  
or  
during playback.  
FWD  
: Fast forward playback  
: Fast reverse playback  
Press POP/TOP.  
REV  
1
POP/TOP  
The pop/top menu appears on the  
TV screen.  
Each time you press this button, the fast-forward  
or fast-reverse speed changes in the following  
sequence:  
Press  
want.  
/
/
/
to select the title you  
Fast x 2  
Fast x 4  
Fast x 8  
Fast x 16  
2
3
If the titles in the top menu are assigned a  
number, you can directly locate a specific title  
by pressing its designated number with the  
number buttons.  
Fast x 32  
Fast x 64  
Fast x 128.  
To resume normal playback  
Press PLAY.  
Notes:  
Press OK.  
The Blu-ray Disc™ player mutes sound and subtitles  
during reverse and forward scan.  
The playback speed may differ depending on the disc.  
Playback starts from Chapter 1 of the selected  
title.  
Playing frame by frame  
Locating a specific chapter or track  
Press  
during still playback.  
STEP  
Each time you press this button, the picture  
advances one frame.  
Press  
or track number you want.  
or  
repeatedly to access the chapter  
To resume normal playback  
Press PLAY.  
Playback starts from the selected chapter or track.  
SKIP  
: Playback starts from the beginning of the current  
chapter or track.When you press twice in quick  
successions, playback starts from the beginning  
of the preceding chapter or track.  
Note: The sound is muted during frame by frame playback.  
Playing in slow motion  
SKIP  
: To locate succeeding chapters or tracks.  
Press  
during playback.  
SLOW  
Each time you press this button, the slow-  
motion speed changes in the following  
sequence:  
Note: Some titles may not display chapter numbers.  
Slow x 1/2  
Slow x 1/4  
Slow x 1/8  
To resume normal playback  
Press PLAY.  
Notes:  
The sound is muted during slow-motion playback.  
3 speeds are available.  
15  
Playback  
Accessing a Specific Location Directly  
Locating a specific title/chapter/time  
Press GOTO.  
(Press GOTO once)  
1
The Goto menu appears on the TV screen.  
Goto File:  
/ 21 (Current: 10)  
GOTO  
e.g.  
1
2
3
a. Press the GOTO button once:  
:
the desired file number  
1
2
3
: the total file number  
Goto Title:  
/ 4 (Current: 1)  
: the currently playing file number  
(Press GOTO twice)  
1
2
3
:
the desired title number  
1
2
3
: the total title number  
: the currently playing title number  
Goto Time:  
:
:
/ 01:50:46 (Current: 0:05:52)  
1
2
3
:
the desired time (hh:mm:ss)  
1
2
3
b. Press the GOTO button twice:  
: the total time  
: the elapsed time  
Goto Chapter:  
/ 30 (Current: 1)  
Press the number buttons to enter title,  
chapter (track) number or time.  
1
2
3
2
3
:
the desired chapter number  
1
2
3
While accessing the TIME using number  
buttons, just enter 2 digits in order.  
: the total chapter number  
: the currently playing chapter number  
The first two numbers you entered represent  
hours.  
The second two numbers you entered  
represent minutes.  
c. Press the GOTO button for 3 times:  
The third two numbers you entered represent  
seconds.  
Goto Time:  
:
:
/ 01:50:46 (Current: 0:05:52)  
Press the CLEAR button to reset the  
numbers.  
1
2
3
Press OK.  
:
the desired time (hh:mm:ss)  
1
2
3
: the total time  
Playback starts from the selected section.  
: the elapsed time  
(Press GOTO once)  
Goto Track:  
/ 21 (Current: 10)  
1
2
3
:
the desired track number  
: the total track number  
: the currently playing track number  
1
2
3
16  
Playback  
Playing in a Random Order  
Repeating a Title, Chapter,Track or Specific Segment  
Repeating a title, chapter or track  
Playing tracks or files in a random order  
Press REPEAT repeatedly to select the desired  
repeat mode during playback.  
Press RANDOM repeatedly to select Random ON  
during playback.  
e.g.  
Once you turn RANDOM function on, the RANDOM  
indicator will be activated and the system will play  
all files in a random sequence.  
Repeat Off  
Repeat Off  
Repeat Title  
Repeat All  
Repeat Chapter  
Repeat Track  
Repeat Off  
Repeat Off  
To resume normal playback  
Press RANDOM repeatedly until  
displayed.  
is  
Random Off  
PIP (BONUSVIEW™) Setting  
Repeat Off  
Repeat Off  
Repeat All  
Repeat All  
Repeat File  
Repeat Off  
Some Blu-ray discs have the PIP function which enables  
you to display the secondary video in the primary video.  
You can call up the secondary video by pressing BONUS  
VIEW whenever the scene contains the secondary video.  
See the documentation that came with the disc for playback  
instructions.  
Repeat Off  
Notes:  
The repeat setting will be cancelled when you stop  
playback.  
The chapter, title or track repeat will be cleared when  
moving to another chapter, title, track / file or folder.  
Repeat playback does not function during A-B repeat  
playback.  
Chapter and title repeat are not available with some  
scenes.  
When the repeat setting is set for a MP3 or WMA folder  
(file), the repeat setting will be cancelled if you select other  
MP3 or WMA folder (file) to playback.  
Press BONUS VIEW during playback to turn  
PIP mode on.  
1
BOUNS VIEW  
Press 2nd. AUDIO to turn the audio for the  
video in the PinP window on or off.  
2
2nd. AUDIO  
Repeating a specific segment  
Press 2nd. SUB to turn the subtitle for the video  
in the PinP window on or off.  
3
Press A-B at the desired starting point A  
during playback.  
2nd. SUB  
1
2
Press A-B at the desired ending point B  
during playback.  
The Blu-ray Disc™ player automatically returns  
to point A and starts repeat playback of the  
selected segment (A-B).  
Primary video  
To resume normal playback  
Secondary video  
Press A-B until  
is displayed.  
Repeat Off  
Notes:  
Some discs may not permit A-B repeat operation.  
You can specify a segment only within the current title or  
track.  
You cannot set the A-B repeat function for a segment that  
includes multiple camera angles.  
To resume normal playback  
Press BONUS VIEW to turn off the PIP mode.  
Note: PIP audio cannot be heard unless Bitstream  
Mixed has been selected on the Audio menu. For more  
information, see “Audio Setting” on page 23.  
A-B repeat does not function during chapter, title, track or  
all repeat playback.  
17  
Playback  
Camera Angle  
Subtitle Selection  
Some BD-video and DVD-video contain scenes which have  
been shot simultaneously from various angles.  
During playback, press SUB.  
1
2
During playback, press ANGLE.  
1
Subtitle  
01/07 ENG  
N/A  
The selected angle will be displayed on the  
display bar at the top of the TV screen.  
PIP Subtitle  
In the example “01/07 ENG”,  
Angle  
01/03  
“01” indicates the currently selected subtitle.  
“07” indicates the total number of subtitles.  
“ENG” indicates the subtitle language.  
The first digit indicates the current viewing  
angle, and the second digit indicates the total  
number of viewing angles.  
Press , then use  
angle.  
/
to select the desired  
Press , then use  
angle.  
/
to select the desired  
2
Displaying On-screen Information  
Audio Selection  
You can check information about the current disc by  
pressing INFO.  
During playback, press AUDIO.  
1
Title 1 Chapter 1/25  
BD-ROM  
0:02:00  
1:57:35  
Audio  
01/03 ENG Dolby TrueHD  
01/03 ENG Dolby TrueHD  
Off  
Play  
PIP Audio  
In the example “01/03 ENG Dolby TrueHD”,  
“01” indicates the currently selected audio  
channel.  
“03” indicates the total number of audio  
channels.  
Title 1 Chapter 1/18  
0:02:00  
DVD  
1:57:35  
Off  
Play  
“ENG” indicates the audio language.  
“DolbyTrueHDdescribes the currently selected  
audio format.  
Track 1/12  
0:00:20  
Press , then use  
audio language and audio format.  
/
to select the desired  
CD-DA  
0:05:35  
Off  
Off  
Play  
2
Notes:  
File: 1/5 song1.mp3  
Title: Cool Track  
The available options of Audio vary from different disc  
format.  
Artist: Ricardo Funiccio  
Album: Dead Dux  
PIP Audio is not available for all discs. It only applies to  
Blu-ray discs that supports picture-in-picture features.  
Off  
Off  
Play  
0:02:00  
0:30:00  
File: 4/13 flower.jpg  
Off  
Pause  
18  
Playback  
Playing AVCHD/MP3/WMA/JPEG Files  
Settings: This option enables you to define Slide  
Show Effects (None, Horizontal Scroll, Fade and  
Shutter) and Slide Show Delay (5 Seconds, 2  
Seconds, 1 Second, No Delay, 10 Seconds, 15  
Seconds and 30 Seconds). After setting, press to  
highlight Ok and then press OK to confirm.  
You can play AVCHD, MP3, WMA or JPEG files that have  
been recorded on a disc on the Blu-ray Disc™ player.  
Playing files on a data disc  
When you insert a data disc containing picture, music, or  
video files into your player, icons are added to the menu  
to indicate that video, music, or picture files are available  
for playback.  
Slide Show Effects  
Slide Show Delay  
None  
No Delay  
Ok  
Press OPEN/CLOSE to open the disc tray,  
place a disc that contains video/  
JPEG files.  
Main Menu: Returns to the main menu.  
MP3/  
1
2
Previous Folder: This item only appears if your  
optical disc or USB flash drive contains several  
different picture folders.  
In Home Menu, press  
and then press  
/
to select Media,  
Start Slide Show: This option enables you to view  
picture (files) one after another automatically.  
,
If a USB flash drive containing music is inserted  
at the same time, the system will enter the  
source selection screen shown as below:  
Browse Music: Goes back to Music folder.  
Press  
then press OK to start playing.  
/
to select the desired photo, and  
Optical Disc  
USB1  
4
5
:
Press REPEAT repeatedly to select the  
desired repeat mode.  
To play music files while viewing photos,  
follow the following steps:  
If no USB flash drive is inserted, the system will  
only show optical disc.  
• Press RETURN.  
• Use /  
press OK.  
to select Browse Music, then  
Press  
/
to select a desired source and  
then press to highlight an option, and then  
press OK.  
3
• Select the desired track and press OK to  
start playing.  
(For example: selecting the Pictures)  
To stop playing and return to the main menu,  
follow one of the steps described below:  
Pictures  
6
Optical Disc  
30 item(s)  
1
• Press STOP.  
• Press RETURN.  
• Press , then use  
Menu and then press OK to confirm.  
/
to highlight Main  
Settings  
Thumbnail  
Main Menu  
Start Slide Show  
Browse Music  
Now Playing  
Tile N/A Chapter N/A  
2
3
1
: defines the total number of files that a device  
contains.  
2
3
: shows the currently playing file number.  
: shows all pictures in thumbnail mode.  
19  
Playback  
Using a USB Flash Drive  
Using Media Player Function  
Operating Media Player Function  
You can play MP3, WMA or JPEG files that have been  
stored on USB flash drives on the Blu-ray Disc™ player.  
Operating a USB Flash Drive  
Set Media Player to “ON”.  
1For detailed operations, please refer to the  
“Media Player” section in “System Setting”  
on page 24.  
Inserting a USB flash drive into the USB  
port on the back of Blu-ray Disc™ player  
until it clicks.  
1
In Home Menu, press  
and then press  
/
to select Media,  
.
2
In Home Menu, press  
and then press  
/
to select Media,  
.
If Media Player is set to “OFF”, Media Player  
will not function.  
2
If no optical disc is inserted, the system will only  
show USB flash drive.  
Press  
press  
OK.  
/ to select a desired source, then  
to highlight an option, and press  
3
Press  
press  
OK.  
/ to select a desired source, then  
to highlight an option, and press  
3
Notes:  
Make sure your player is properly connected to the  
network before using Media Player. Furthermore, you  
need other Media Player servers in the network to see  
and/or hear contents.  
For detailed operations, please follow the instructions in  
Playing files on a data disc” on page 19 for details.  
Removing the USB Flash Drive  
Do not remove the LAN connector during playback.  
In stop mode, gently pull the USB flash drive out  
slowly.  
Notes:  
If you cannot easily insert the USB flash drive, you may  
have inserted it incorrectly. Try to turnover the device  
and then insert again.  
Do not remove the USB flash drive during playback.  
20  
Customizing the Function Settings  
You can change the default settings to customize  
performance to your preference.  
3. Follow the on-screen instructions to customize the  
following settings to your preference:  
OSD Language Settings  
General Operations  
(English/French/Spanish)  
Resolution  
1. Press  
full stop mode, the Settings menu appears.  
2. Press button, then use button to select the  
setting options.  
3. Press OK button.  
/
to select Settings in home menu while in  
(HDMI Auto/1080p/1080i/720p/480p/480i)  
TV Aspect  
/
(16:9 Wide/16:9 Pillabox/4:3 Pan and Scan/4:3  
Letterbox)  
4. Press or RETURN button to return to the previous  
menu.  
Optical Disc Auto Play  
(Disable/Enable)  
Screen Saver Duration  
Info  
(Off /5 Minutes/10 Minutes/ 20 Minutes/ 30  
Minutes)  
Quick Setup  
4. After setting, press OK to confirm and exit the setup.  
Note: If it is the first time for the player to start up or  
users restore all settings to factory defaults, the system  
will prompt you to perform Quick Setup. Repeat the steps  
described as above to complete the setup.  
BD-Live  
Display  
Audio  
Using BD-Live™ Features  
A
Language  
Some (but not all) Blu-ray Disc™ discs contain additional  
features that are made available to players that are  
connected to the internet, and have additional memory  
added. These additional features may include things like:  
Parental  
the ability to download new movie trailers  
additional ‘commentary’ by actors and directors  
multiperson game play and chat  
submenu display area  
Settings menu items  
In order to access BD-Live™ functions, the player must  
be properly configured for BD-Live internet access, and it  
must be equipped with additional memory.  
Info Menu  
This menu displays the following information:  
Note: BD-Live™ requires connection of a USB flash  
drive of at least 1 GB (sold separately) to USB port. For  
models without built-inWi-Fi®, BD-Live™ is only supported  
via Ethernet so when using single USB port for internet  
access, BD-Live™ will not be available. Performance  
of interactive features may vary due to disc design or  
content, and may also require an always-on broadband  
internet connection. Firmware update may be required  
for some interactive features. Some features may require  
additional bandwidth. Internet services are available only  
in the United States.  
Software Version  
Software Date  
Netflix ESN  
1. In the main menu of Settings, press button, then use  
button to select Info to display the version information  
on software and Netflix ESN.  
/
2. Press or RETURN to go to the previous menu.  
1. In the main menu of Settings, press button, then use  
/
button to select BD-Live, then press OK.  
/
Performing Quick-Setup  
2. Press  
3. Use  
to select an option, and then press OK.  
to select the desired setting, and then press  
/
OK to confirm.  
4. Press to go to the previous menu.  
1. In the main menu of Settings, press button, then use  
/ button to select Quick Setup, and then press OK  
to confirm.  
BD-Live Internet Access:  
2. Press OK to perform Quick Setup.  
To exit the setup menu:  
Limit Access — Allows Internet access with valid BD-  
Live™ network access approval.  
Always Allow Access — Always allows BD-Live  
Internet access.  
Prohibit Access — Never allows BD-Live Internet  
access.  
Use button to highlight “No thanks. I’ll go through  
the full setup menu later”, and then press OK.  
Or press button directly.  
21  
Customizing the Function Settings  
In order to set the player up for BD-Live Internet Access,  
perform the following steps:  
Resolution:  
You can define the video output resolution in this option.  
1. In the main menu of Settings, press button, then use  
to select BD-Live, then press OK.  
to select “BD-Live Internet Access”, and  
TV Type  
Resolution  
/
2. Press  
/
then press OK.  
If your TV is a high-definition  
TV(HDTV) connected to the HDMI  
jack on your player and you want your  
player to set the output resolution  
based on information exchanged  
between the TV and your player over  
the HDMI cable.  
3. Use  
/
OK to confirm.  
to select the desired setting, and then press  
HDMI Auto  
4. Make sure that “Limit Access” or “Always Allow  
Access” is checked.  
5. Once the USB flash drive has been inserted, if there  
is not at least 100Mbyte of free space on the device,  
you should choose “Erase Blu-ray Storage” from the  
BD-Live setup menu.  
If the TV is a high-definition TV  
(HDTV) capable of 1080p (any frame  
rate) connected to the HDMI jack on  
your player  
1080p  
6. Press to return to the main menu of Settings, then  
use  
/
to highlight Network, and then press OK.(For  
details, please refer to “Network Connection Settingon  
Page 25.)  
If your TV is a high-definition TV  
(HDTV) capable of 1080i only  
1080i  
720p  
480p  
480i  
Notes:  
Depending on your connection environment, it may take  
time to connect to the Internet or the Internet may not  
be connected.  
When BD-Live™ function are used and the unit is  
connected to the Internet, you may be charged for this  
communication.  
If your TV is a high-definition TV  
(HDTV) capable of 720p only  
If your TV is an enhanced-definition  
TV (EDTV) capable of 480p only  
Do not remove the USB flash drive when using the  
BD-Live™ function.  
If your TV is a standard-definition TV  
(SDTV) capable of 480i only  
BD-Live Storage:  
Notes:  
This option is used to tell the Blu-ray Disc™ player whether  
or not to use an inserted USB flash drive to store BD-Live™  
content (movie trailers, additional scenes, etc.).  
Selecting a resolution the TV does not support could  
result in an unstable picture or loss of the picture. See  
the documentation that came with the TV to find the  
resolutions the TV supports.  
In order to add BD-Live™ memory for BD-Live Internet  
Access, insert a USB flash drive (1GB is recommended)  
into the USB port on the player.  
Only the HDMI output on your player supports 1080p  
video output at any frame rate.  
Erase Blu-ray Storage:  
TV Aspect:  
If you choose OK to erase Blu-ray storage, all bookmarks  
and BD-Live™ content saved in memory are deleted.  
16:9 wide, 16:9 Pillarbox, 4:3 Pan and Scan and 4:3  
Letter Box are available for your choice.  
Film Mode:  
Display Setting  
Movies are recorded on film at a rate of 24 pictures (frames)  
per second. Many of the movies on Blu-ray discs are  
placed on the discs at this frame rate. If your TV supports  
24 frames per second, but you would prefer viewing the  
video at a higher frame rate, you should turn off Film Mode.  
Off selects a 60 frames/second output format.  
1. In the main menu of Settings, press button to select  
Display, and then press OK to confirm.  
2. Press  
3. Use  
/
to select an option, and then press OK.  
to select the desired option, and then press  
/
OK to confirm your selection.  
4. Press to go to the previous menu.  
Deep Color:  
This option decides whether to turn off the Deep Color  
(color depth) setting for video signals output from the  
HDMI OUT jack.  
HDMI Status:  
This option displays the HDMI status. If an HDMI TV is  
connected, Connected appears. If an HDMI TV is not  
connected, Disconnected appears.  
Connecting the player and a TV that supports Deep  
Color allows more accurate color reproduction than when  
connecting it to a TV that does not support Deep Color.  
It is recommended to set this option Off if the picture is  
unstable or colors appear unnatural.  
HDMI Preferred Format:  
This option shows the best HDMI format for the connected  
TV. If HDMI is not pulled out, a composite image is not  
output.  
* HDMI connection is required.Cables are not included for  
BDX2150KU model. Analog connection is not supported.  
22  
Customizing the Function Settings  
This would be useful, for instance, when you want to watch  
a movie in the evening when others might be sleeping.  
Audio Setting  
NOTE:This setup menu item has no effect unless you have  
selected “Bitstream Mixed” in the Blu-ray Disc™ player’s  
audio setup menu.  
The settings in the Audio menu will configure the Blu-ray  
Disc™ player’s digital audio outputs (HDMI or Coaxial).  
1. In the main menu of Settings, press button, then use  
/
When Dynamic Range Control is set to Off, movie  
soundtracks are played with the standard dynamic range.  
button to select Audio, then press OK button.  
2. Press  
3. Use  
/
to select an option, and then press OK.  
When movie soundtracks are played at low volume orfrom  
smaller speakers, you can set Dynamic Range Control to  
On.Your player applies appropriate compression to make  
low-level content more intelligible and prevent dramatic  
passages from getting too loud.  
/
press OK to confirm your selection.  
to select your preferred audio items, and then  
4. Press to go to the previous menu.  
PCM Downsampling:  
Selecting the “Auto” option turns on the Dynamic Range  
Control for all Blu-ray Disc™ movie soundtracks except  
Dolby TrueHD. If you have selected a Dolby TrueHD track  
on the Blu-ray Disc™ disc, the “auto” selection tells the  
Blu-ray Disc™ player to only turn on dynamic range control  
if information embedded in the Dolby TrueHD sound track  
tells it to do so.  
If you don’t have a surround sound receiver connected  
to the Blu-ray Disc™ player, you should leave the PCM  
downsampling to 48 kHz, and proceed to the next setup  
menu item.  
If you have a surround sound receiver connected tothe Blu-  
ray Disc™ player, and you have connected to the surround  
receiver via the Blu-ray Disc™ player’s HDMI output, this  
setting has no effect on the audio going to the HDMI output  
of the player.Leave the PCM downsampling to 48 kHz, and  
proceed to the next setup menu item.  
Stereo Downmix:  
Select whether to downmix the multi-channel audio into  
fewer channels.  
Auto — Downmixes the multi-channel audio into  
the specific stereo that the connected equipment  
supports.  
NOTE: Incorrectly setting the digital audio output’s PCM  
sampling rate too high may result in unpredictable audio  
playback.  
Stereo (LoRo) — Downmixes the multi-channel audio  
into two channel stereo. Choose when the Blu-ray  
Disc™ player is connected to the equipment that does  
not support virtual surround function such as Dolby  
Pro Logic.  
Digital Output:  
PCM Stereo — Sets the output to PCM Stereo if you  
have not an audio receiver connected to your Blu-ray  
Disc™ player or the audio receiver connected to Blu-ray  
disc player is not a 5.1/7.1 channel receiver.  
Surround Encoded (LtRt) — Downmixes the multi-  
channel audio into surround compatible stereo.Choose  
when the Blu-ray Disc™ player is connected to the  
equipment that supports virtual surround function such  
as Dolby Pro Logic.  
Bitstream HD — Lets your player send Dolby TrueHD  
or DTS-HD MA bitstreams over HDMI (if your player is  
connected to a compatible HDMI audio receiver).If your  
player is not connected to a compatible HDMI receiver  
(for example, your player is connected directly to the  
TV, a compatible audio signal is automatically sent  
over the HDMI connection. With this setting, Blu-ray  
audio is limited to the soundtrack for the main movie  
(no PIP audio).  
Language Setting  
1. In the main menu of Settings, press button, then use  
/
Bitstream Legacy — Sends a DTS or Dolby Digital  
bitstream from the disc over the HDMI connection.  
Blu-ray audio is limited to the soundtrack for the main  
movie (no PIP audio).  
to select Language, and then press OK.  
to select OSD, Menu, Audio or Subtitle, and  
2. Press  
/
then press OK.  
3. Use  
/ to select your preferred language, and then  
press OK to confirm your selection.  
Bitstream Mixed — Sends a Dolby Digital or DTS  
bitstream over the HDMI or Coaxial connection. This  
mode is primarily intended for use when you want to  
hear both PIP audio and the movie audio.  
4. Press to go to the previous menu.  
OSD:  
PCM 5.1 — Sends a PCM audio signal of up to 5.1  
channels over the HDMI connection.  
This option enables you to select the on-screen menu  
language.  
PCM 7.1 — Sends a PCM audio signal of up to 7.1  
channels over the HDMI connection.  
Menu:  
This option lets you to select the disc menu language.  
Dynamic Range Control:  
Notes:  
Dynamic Range Control means that you can allow the Blu-  
ray Disc™ player to make the loud parts of a movie’s audio  
track quieter than they would be in the theatre, without  
making the dialog of the actors any quieter.  
Not all languages are available on all discs.  
Most discs only have one menu language.  
23  
Customizing the Function Settings  
7 [NC-17] — Not suitable for anyone under 17.  
Audio:  
8 [Adult] — All Blu-ray discs and DVDs can be  
played.  
You can choose the audio language from this option to  
your preference.  
4. Press to go to the previous menu.  
Notes:  
Not all languages are available on all discs.  
Setting the parental control password  
Some discs do not let you select the audio language  
using your player’s menu. Instead, you have to select  
the audio language from the disc setup menu (the menu  
that appears after you insert the disc).  
1. In the main menu of Settings, press , then press  
to select Parental, and then press OK.  
/
2. Press  
OK.  
/
to select Parental Password, then press  
Subtitle:  
3. Enter a 4-digit number for the parental password, then  
use to highlight Ok, and then press OK to confirm.  
If you forget your password, reset your player to the  
factory defaults. For more information, see “Restore  
factory defaults” on page 25.  
You can customize your preferred subtitle language in  
this option.  
Notes:  
Not all languages are available on all discs.  
4. Press to go to the previous menu.  
Some discs do not let you select the subtitle language  
using your player’s menu.Instead, you have to select the  
subtitle language from the disc setup menu (the menu  
that appears after you insert the disc).  
System Setting  
You can also select the subtitle language from the  
subtitle menu in the on-screen menu.  
1. In the main menu of Settings, press button, then use  
/
button to select System, then press OK.  
/
/
OK to confirm.  
4. Press to go to the previous menu.  
2. Press  
3. Use  
to select an option, and then press OK.  
to select the desired setting, and then press  
Parental Control  
1. In the main menu of Settings, press , then press  
to select Parental, and then press OK.  
/
Optical Disc Auto Play:  
2. Press  
3. Use  
/
to select an option, and then press OK.  
to select the desired option, and then press  
If Enable is selected, it will load data and play back  
automatically when you insert a Blu-ray disc.WhenDisable  
is selected and if you insert a Blu-ray disc, the disc you can  
select will be displayed on the Settings menu.  
/
OK to confirm your selection.  
4. Press to go to the previous menu.  
Note: If Parental Control was previously turned On, you  
will be prompted to enter the parental control password  
before being allowed to change these settings. (See  
Turning parental control on or off” for details.)  
Media Player:  
Media Player technology enables you to create an  
interoperability network with other devices for resource  
sharing based on a network.  
Selecting the parental country  
Screen Saver Duration:  
Parental Country is fixed in USA.  
This Blu-ray Disc™ player has a screen saver feature that  
turns the screen black when your player is inactive.You can  
set the interval time you want your player to wait before  
activating the screen saver.  
Turning parental control on or off  
1. In the main menu of Settings, press , then press  
to select Parental, and then press OK.  
/
2. Press  
OK.  
3. Press  
/
to select Parental Control, then press  
Note: The unit shuts down automatically in about thirty  
minutes if it remains idle and no activities are made.  
/
to select On or Off, then press OK.  
CEC Support:  
4. Press to go to the previous menu.  
This option is used to allow the TV remote control to  
control certain functions of the Blu-ray Disc™ player; and  
for the Blu-ray Disc™ player to control certain functions  
of the TV.  
Setting the parental control level  
1. In the main menu of Settings, press , then press  
to select Parental, and then press OK.  
/
2. Press  
3. Press  
/
/
to select Parental Level, then press OK.  
to select the rating level you want to block,  
On: Allow mutual control of devices through HDMI.  
Off: Do not allow CEC control.  
then press OK. The rating and all higher ratings will be  
blocked.You can select:  
Notes:  
Not all TVs are compatible with your Blu-ray Disc™  
player.  
1 [Kid Safe] — Suitable for all children.  
2 [G] — General audiences.  
The default setting is Off. Select On if CEC control is  
necessary.  
3 [PG] — Parental guidance suggested.  
4 [PG-13] — Not suitable for anyone under 13.  
5 [PG-R] — Parental guidance recommended.  
Update Via Network:  
This option displays the required storage space if the Blu-  
ray Disc™ player is connected to internet for upgrade.  
6 [R] — Not suitable for anyone under 17 unless  
supervised by a parent or adult guardian.  
24  
Customizing the Function Settings  
For detailed upgrade operation, please refer to “UpgradingYour Player’s Firmware” on this page.  
Restore factory defaults:  
Choose one of the options, then press OK to pop up a dialog box, choose Ok in the box, and then press OK to  
confirm.  
To apply the deactivation, please plug off the player after operating deactivation.  
Actions  
Response  
Restore factory settings and deactivate All settings (including Parental Password) will be restored to the factory  
all connected applications  
Restore factory settings  
defaults and all connected applications will be deactivated.  
Restores all settings (including Parental Password) to the factory defaults.  
Deactivate all connected applications Deactivates all connected applications  
Deactivate Netflix  
Deactivates the connected Netflix application  
Deactivates the connected YouTube application  
Deactivates the connected VUDU application  
Deactivates the connected Pandora application  
Deactivates the connected Picasa application  
Deactivates the connected Blockbuster application  
Deactivates the connected CinemaNow application  
DeactivateYouTube  
Deactivate VUDU  
Deactivate Pandora  
Deactivate Picasa  
Deactivate Blockbuster  
Deactivate CinemaNow  
Network Connection Setting  
Note: The option Wireless appears only while a wireless LAN adapter  
is inserted into the USB port.  
IP Settings  
Link Status  
Link Down  
00:23:18:75:b1:2b  
Dynamic  
0.0.0.0  
Configuring a wired Internet connection  
MAC Address  
IP Mode  
1. Press  
to select IP Mode, then press OK.  
2. Press to select an IP mode.You can select:  
/
to select Network in stop mode, then press OK. Press  
/
IP Address  
Subnet Mask  
Gateway  
/
0.0.0.0  
Manual — Lets you manually configure network settings, such as  
IP address, subnet mask, and gateway settings.  
Dynamic — Uses DHCP to automatically obtain an IP address.  
0.0.0.0  
Primary DNS  
Secondary DNS  
0.0.0.0  
3. Press or RETURN to go to the previous menu.  
0.0.0.0  
Apply  
Cancel  
Network Test  
UpgradingYour Player’s Firmware  
This player needs to stay up to date to make sure that you have the latest features available.This is done with a software  
update.You may periodically see a screen that prompts you to update your firmware. It is highly recommended that you  
apply all updates available to enhance and enjoy product features.  
Automatic updates over the Internet  
1. Make sure that your player is successfully connected to the Internet.If new firmware is available, you will see a message  
prompting you to update your firmware. Follow the directions in the update program to complete the firmware update  
procedure for the player.  
2. Use  
/
on the TV screen.  
to highlight “OK”, and then press OK. The software will begin downloading, and a status bar will appear  
3. After the firmware update has completed successfully, a message will appear indicating the player will automatically  
turn itself off and restart.  
Note: Never turn off the player during a firmware update process. Let the firmware update process finish.  
Toshiba America Information Systems, Inc. will not be responsible for damage or malfunction caused to the player by  
an unstable internet connection or consumer negligence during firmware updates.  
25  
Using the Connected Applications  
Some models are equipped with the capability to watch movies over the internet.  
Watching Movies with BLOCKBUSTER®  
Watching Movies with CinemaNow®  
This Blu-ray Disc™ Player enables you to use the following  
services provided by Blockbuster.  
This Blu-ray Disc™ Player enables you to use the following  
services provided by CinemaNow.  
1. In Home Menu, press  
2. Press , then press  
then press OK to enter Blockbuster main menu.  
/
to select Connected.  
1. In Home Menu, press  
2. Press , then press  
and then press OK to enter CinemaNow main menu.  
/
to select Connected.  
/
to highlight Blockbuster, and  
/
to highlight CinemaNow,  
Movies : Display movies.  
Movies : Display movies.  
TV Shows : Display TV Shows.  
TV Shows : Display TV Shows.  
Find : Search for a desired movie or TV show by  
entering it manually.  
Search All : Search for a desired movie or TV show  
by entering it manually.  
My Library : Display a title that you bought or  
rented.  
My Videos : Display a title that you bought or  
rented.  
My Favorites : Display a title that has been added  
to My Favorites.  
Wish List : Display a title that has been added to  
Wish List.  
Configure : Activate or deactivate the Blu-ray  
Disc™ Player.  
Settings : Activate or deactivate the Blu-ray Disc™  
Player.  
Help : Get customer service contact information and  
check the current software version.  
Help : Get customer service contact information and  
check the current software version.  
3. If you don’t have a Blockbuster account yet, visit  
www.blockbuster.com to create your account.  
3. If you don’t have a CinemaNow account yet, visit www.  
cinemanow.com/bbactivate to create your account.  
4. Use  
OK.  
/
/
/
to select the Configure, then press  
4. Use  
OK.  
/
/
/
to select the Settings, then press  
5. Use the number buttons on the remote control to enter  
the activation code that is created by the web site, then  
use to highlight Activate, and press OK to confirm.  
5. Press the Activate.  
6. Use the number buttons on the remote control to enter  
the activation code that is created by the web site, then  
use to highlight Activate, and press OK to confirm.  
When the Blu-ray Disc™ Player is activated, you will  
move to the Home page.  
When the Blu-ray Disc™ Player is activated, you will  
move to the Home page.  
6. Press  
press OK.  
7. Press  
/
to select the Movies or TV Shows, then  
7. Press  
press OK.  
8. Press  
/
to select the Movies or TV Shows, then  
/
/
/
to select the desired title, then press  
OK.  
/
/
/
to select the desired title, then press  
8. Press  
OK.  
/
to select the Rent or Buy, then press  
OK.  
9. Press  
OK.  
/
/
to select the Rent or Buy, then press  
9. Press  
/
OK.If you want to play any of the titles that your bought,  
to select the Submit Order, then press  
10.Press  
to select the Submit Order, then press  
simply click Play Now.  
OK.If you want to play any of the titles that your bought,  
simply click Play Now.  
10.Press to go to the previous menu.  
11.Press to go to the previous menu.  
26  
Using the Connected Applications  
appear on the TV screen. Select your desired one using  
the remote control of the player. You can control Netflix  
streaming video with the following keys of the remote  
control of this player:  
Watching Movies with Netflix®  
To use Netflix service, connect this player to your  
network, and make the network settings if they are not  
finished yet.  
To start playing movie.  
To pause playback while in PLAY mode.  
1. Launching Netflix movie  
In Home Menu, press  
use , and then press  
then press OK to enter.  
/
to select Connected, then  
to highlight “Netflix”, and  
To stop playing and return to a list of  
movie titles.  
/
To pause playing movie.  
To start playing while in PAUSE mode.  
2. Creating Netflix account  
If you are not a Netflix Member:  
To pause playing and open a list of scenes.  
Pressing further proceeds to the next  
scene.  
Select “no”. Read the instructions displayed on the TV  
PC. Sign up to create your account, then select “I’m now  
a member”.  
To pause playing and open a list of scenes.  
Pressing further proceeds to the previous  
scene.  
To stop playing and return to a list of movie  
titles.  
To pause playing and open a list of scenes.  
Fast forward play starts.  
To pause playing and open a list of scenes.  
Fast reverse play starts.  
HOME To stop playing and return to Home Menu.  
MENU  
If you are a Netflix Member:  
Select “Yes”.  
OK  
To pause playing of Trick play screen while  
in PLAY mode.  
To start playing the movie in case of during  
Trick play screen.  
3. Activating Netflix player  
To play streaming video via Netflix service, Netflix player  
needs to be activated. Read the instructions displayed on  
your PC.Sign in to your Netflix account, if necessary.Enter  
Note: Resolution of video streamed from Netflix varies  
depending on communication speed or bitrate of each  
content, etc.  
the activation code displayed on the TV screen.  
Watching Movies withYouTube®  
1. In Home Menu, press  
2. Press , then press  
then press OK to confirm.  
/
to select Connected.  
to highlight YouTube, and  
/
3. Please enjoy any contents.  
4. Preparing Instant Queue  
To play streaming video via Netflix service, Netflix player  
needs to be activated. Read the instructions displayed on  
your PC.Sign in to your Netflix account, if necessary.Enter  
the activation code displayed on the TV screen.  
Now you can view Netflix streaming video.  
After having activated Netflix player and prepared Instant  
Queue, movies and TV episodes in your Instant Queue  
27  
Using the Connected Applications  
Listening to Music with Pandora®  
Browsing Photos with Picasa®  
Signing in with your account  
Using an existing Pandora account  
1. In Home Menu, press  
2. Press , then press  
then press OK to confirm.  
/
to select Connected.  
To display photos in your web album on the screen, you  
need to sign in with your Picasa account.  
/
to highlight Pandora, and  
1. In Home Menu, press  
/
to select Connected.  
3. Select “I have a Pandora account” from the option  
list.  
2. Press , then press  
press OK to confirm.  
/
to highlight Picasa, and then  
4. Sign in with your test account.  
3. Enter your user name using the virtual keyboard, and  
press OK while [OK] is selected.  
Creating a new account on the Blu-ray Disc™  
player  
4. Enter the password using the virtual keyboard, and  
press OK while [OK] is selected.  
1. In Home Menu, press  
2. Press , then press  
then press OK to confirm.  
/
to select Connected.  
Your web album is displayed on the screen.  
/
to highlight Pandora, and  
Creating a new Picasa account on your PC  
3. Select “I am new to Pandora” from the option list.  
Go to http://picasa.google.com/ to create a new  
account.  
4. You will be given an activation code. Use this activation  
code to generate a new account and link it to the Blu-ray  
Disc™ player using a PC.  
Creating a new Pandora account on your PC  
Go to http://www.pandora.com/ to create a new  
account.  
Watching Movies with VUDU™  
Creating a Vudu account on your player  
1. In Home Menu, press  
/
to select Connected.  
2. Press , then press  
press OK to confirm.  
/
to highlight Vudu, and then  
3. Follow the instructions to create an account, it will ask  
for an email address.  
4. Enter YOUR email addre ss using the keyboard that  
appears on the screen. VUDU will then display a  
message on the TV “Sending you an email”.  
Creating a Vudu account on your PC  
1. VUDU will send you an email with a hyper-link; click on  
the link.  
2. In the Vudu page that comes up on your PC’s browser  
after clicking the link, enter the e-mail and password of  
the owner of the account.  
3. VUDU will then display a message “Enabling your  
device to view movies.The email message on your  
TV screen will disappear when done”.  
4. On yourTV, you can now navigate to aVudu movie, and  
‘buy’ or ‘rent’ it.  
28  
Troubleshooting & Maintenance  
Troubleshooting  
If the unit does not perform properly when operated as instructed in this manual, check the unit, consulting the following  
checklist.  
Problem  
Solution  
No power  
- Check if the AC cord is properly connected.  
- Unplug the AC cord once, and wait for 5-10 seconds and then plug it in  
again.  
No sound or picture  
- Check if the connected TV is turned on.  
- Check if the connections are made securely and correctly.  
- Check whether the connected TV or other device supports HDCP. (This unit  
will not output a video signal unless the other device supports HDCP.)  
- Check whether the output format of this unit (HDMI FORMAT) matches the  
supported input format of other connected device.  
Distorted picture  
- Sometimes a small amount of picture distortion may appear. This is not a  
malfunction.  
- Connect this unit directly to the TV.  
Completely distorted picture or  
black / white picture with Blu-  
ray Disc™ / DVD  
- Make sure the disc is compatible with this unit.  
No sound or distorted sound  
- Adjust the volume.  
- Check if speakers are connected correctly.  
- Check the HDMI connections.  
- Check the settings in “Audio” menu.  
Picture freezes momentarily  
during playback  
- Check the disc for fingerprints / scratches and clean with a soft cloth wiping  
from center to edge.  
- Clean the disc.  
Disc cannot be played back  
- Clean the disc.  
- Ensure the disc label is facing up.  
- Check if the disc is defective by trying another disc.  
- Cancel the ratings control or change the control level.  
- Insert a correct disc that can be played back on this unit.  
No return to start-up screen  
when disc is removed  
- Reset this unit by turning it off, then on again.  
The unit does not respond to  
the remote control  
- Aim the remote control directly at infrared sensor window on the front panel.  
- Reduce the distance to infrared sensor window.  
- Replace the batteries in the remote control.  
- Re-insert the batteries with their polarities (+ / - signs) as indicated.  
Buttons do not work or the unit  
stops responding  
- To completely reset the unit, unplug the AC cord from the AC outlet for 5-10  
seconds.  
The unit does not respond to  
some operating commands  
during playback  
- Operations may not be permitted by the disc.  
Refer to the instructions of the disc.  
29  
Troubleshooting & Maintenance  
Problem  
Solution  
The unit cannot read Blu-ray  
Disc™ / DVD/ CD  
- Dew condensation may form inside the unit. Do not use this unit for at least a  
few hours until its inside gets dry.  
- Wipe the dirt off the disc or replace the disc.  
Angle does not switch  
- The angle cannot be switched for Blu-ray Disc™ / DVD which do not contain  
multiple angles.  
In some cases multiple angles are only recorded for specific scenes.  
Playback does not start when  
the title is selected  
- Check the settings in “Parental” menu.  
The password for rating level has - If you forget your password, reset your player to the factory defaults and your  
been forgotten  
forgotten password will be cleared. For more information, see “Restore fac-  
tory defaults” on page 25.  
Cannot connect to the network  
- Check if the LAN cable connection is properly made.  
- Turn on the modem or broadband router.  
- Check if the broadband router and/or modem is correctly connected.  
- Check the “Network Connection Setting”.  
Cannot connect to the network  
while my PC is connected to the  
network  
- Check the content of your Internet service contract to see if your Internet  
service provider prevents multiple terminals connecting at the same time.  
Cannot use the BD-Live™  
function  
- Use a USB flash drive with enough space.  
Notes:  
Some functions are not available in specific modes, but this is not a malfunction. Read the description in this manual  
for details on correct operations.  
Some functions are prohibited on some discs.  
Maintenance  
Servicing  
Please refer to relevant topics on “Troubleshooting & Maintenance” before returning the product.  
If this unit becomes inoperative, do not try to correct the problem by yourself. There are no user-serviceable parts  
inside. Turn off, unplug the power plug, and please call our helpline to locate an Authorized Service Center.  
Cleaning the cabinet  
Never use a solvent, thinner, benzene or alcohol to clean the unit. Do not spray insecticide liquid near the unit. Such  
chemicals may discolor the surface or damage the unit.  
Cleaning discs  
When a disc becomes dirty, clean it with a cleaning cloth. Wipe the disc from the center to out. Do not wipe in a  
circular motion.  
Do not use solvents such as benzine, thinner, commercially available cleaners, detergent, abrasive cleaning agents  
or antistatic spray intended for analog records.  
Cleaning the disc lens  
If this unit still does not perform properly although you refer to the relevant sections and to “Troubleshooting” in this  
manual, the laser optical pickup unit may be dirty. Consult your dealer or an Authorized Service Center for inspection  
and cleaning of the laser optical pickup unit.  
Disc handling  
Handle the discs so that fingerprints and dust do not adhere to the surfaces of the discs.  
Always store the disc in its protective case when it is not used.  
Note that discs with special shapes (heart-shaped discs, octagonal discs, etc.) cannot be played back on this unit.  
Do not attempt to playback such discs, as they may damage the unit.  
IR signal check  
If the remote control is not working properly, you can use a digital camera (including a cellular phone with built-in  
camera) to see if it is sending out an infrared signal.  
30  
Glossary  
Analog Audio  
Dolby® Digital Plus  
An electrical signal that directly represents sound.  
Compare this to digital audio which can be an electrical  
signal, but is an indirect representation of sound.  
Dolby Digital Plus is the next generation digital audio  
compression technology developed as an extension to  
Dolby Digital. Blu-ray Disc supports 7.1 multi-channel  
surround sound output.  
Aspect Ratio  
Dolby® TrueHD  
The width of a TV screen relative to its height.  
Dolby TrueHD is a lossless coding technology developed  
for next generation optical discs. Blu-ray Disc supports  
7.1 multi-channel surround sound output.  
Conventional TVs are 4:3 (in other words, the TV screen  
is almost square); widescreen models are 16:9 (the TV  
screen is almost twice as wide as it is high).  
DTS®  
AVCHD  
DTS is  
a
multi-channel surround sound system. By  
AVCHD is  
a
new format for high definition video  
connecting to DTS decoder, you can enjoy movie dynamic  
and realistic sound like movie theater. DTS surround  
sound technologies were developed by DTS, Inc.  
camcorders which can record and play high-resolution  
HD images.  
BD-Java  
DTS-HD®  
With some Blu-ray Disc™ which support Java  
applications, you can enjoy the interactive functions such  
as games or interactive menus.  
DTS-HD is a lossless coding technology developed as an  
extension of the original DTS Coherent Acoustics format.  
Blu-ray Disc supports 7.1 multi-channel surround sound  
output.  
BD-Live™  
BD-Live™ is a BD-video (BD-ROM version 2 Profile 2.0/  
Profile 1.1) which contains new functions (e.g. Internet  
connection), in addition to the BONUSVIEW function.  
Gateway  
IP Address of the electronic devices (such as router)  
which provide Internet access.  
Blu-ray Disc™ (BD)  
HDMI (High-Definition Multimedia Interface)  
Blu-ray Disc™ is a next generation optical video disc which  
is capable of storing much more data than a conventional  
DVD is. The large capacity makes it possible to benefit  
from the features such as high-definition videos, multi-  
channel surround sounds, interactive menus and so on.  
A digital interface between audio and video source. It can  
transmit component video, audio, and control signal with  
one cable connection.  
Hub  
Chapter  
A
network.  
device used for connecting multiple device to the  
Just as a book is split up into several chapters, a title on a  
BD-video or DVD-video is usually divided into chapters.  
IP Address  
Component Video Output  
A set of numbers which are assigned to devices  
participating in a computer network.  
Each signal of luminance (Y) and component (PB/CB, PR/  
CR) is independent to output so that you can experience  
picture Color as it is. Also, due to compatibility with  
progressive video (525p/480p), you can experience  
higher-density picture than that in interlace (525i/480i).  
JPEG (Joint Photographic Experts Group)  
JPEG is a method of compressing still picture files. You  
can copy JPEG files on BD-RE/-R, DVD-RW/-R or CD-  
RW/-R from a computer and play back the files in this  
unit.  
Digital Audio  
An indirect representation of sound by numbers. During  
recording, the sound is measured at discrete intervals  
(44,100 times a second for CD audio) by an analog-to-  
digital converter, generating a stream of numbers. On  
LAN (Local Area Network)  
A group of computer networks covering a small area like  
a company, school or home.  
playback,  
analog signal based on these numbers.  
a
digital-to-analog converter generates an  
Local Storage  
A storage area of sub contents for playing virtual  
packages on BD-video.  
DNS Server  
A server which translates Internet domain names into IP  
addresses.  
MP3 (MPEG audio layer 3)  
MP3 is a method of compressing files.You can copy MP3  
files on BD-RE/-R, DVD-RW/-R or CD-RW/-R from the  
computer and play back the files on this unit.  
Dolby® Digital  
The system to compress digital sound developed by  
Dolby Laboratories. It offers you sound of stereo (2ch) or  
multi-channel audio.  
31  
Glossary  
PCM (Pulse Code Modulation)  
Subnet Mask  
The most common system of encoding digital audio,  
found on CD and DAT. Excellent quality that requires a  
lot of data compared to formats such as Dolby Digital and  
MPEG audio.For compatibility with digital audio recorders  
(CD, MD and DAT) and AV amplifiers with digital inputs,  
this unit can convert Dolby Digital, DTS, and MPEG audio  
to PCM.  
A mask which is used to determine what subnet an IP  
address belongs to.  
Title  
A collection of chapters on BD-video or DVD-video.  
Track  
Audio CD use tracks to divide up the content of a disc.  
a
Proxy Server  
The BD-video or DVD-video equivalent is called  
chapter. See also “Chapter”.  
Proxy server is a server which acts as an intermediary  
between a workstation user and the Internet to ensure  
security.  
Virtual Package  
The function which copies data to other media (local  
storage) from the Internet and play the secondary video,  
secondary audio and the subtitle at the same time. The  
method of the playback varies depending on discs.  
Region Code  
Regions associate discs and players with particular areas  
of the world. This unit will only play back discs that have  
compatible region codes.You can find the region code of  
your unit by looking on the rear panel. Some discs are  
compatible with more than one region (or all regions).  
Windows Media™ Audio  
Windows Media™ Audio is the audio compressing  
technology developed by Microsoft. You can copy  
Windows Media™ Audio files on BD-RE/-R, DVD-RW/-R  
or CD-RW/-R from a computer and play them back on  
this unit.  
Router  
A networking device which distinguishes the IP address  
assigned to each device and routing and forwarding  
information in the computer network.  
x.v.Color  
Sampling Frequency  
“x.v.Color” is a promotion name given to the products that  
have the capability to realize a wide color space based  
on the xvYCC specifications and is a trademark of Sony  
Corporation.  
The rate which sound is measured by a specified interval  
to turn into digital audio data. The numbers of sampling  
in one second defines as sampling frequency. The higher  
the rate, the better the sound quality.  
Specifications  
General  
Signal system  
NTSC color  
Power requirements  
Power consumption  
Dimensions (width x height x depth)  
Weight  
120 V AC, 60 Hz  
15 W  
360 × 36 × 192.7 mm  
1.02 kg  
Operating temperature  
Operating humidity  
41°F (5°C) to 95°F (35°C)  
Less than 80 % (no condensation)  
Terminals  
HDMI output  
HDMI jack x 1  
Video: 480i, 480p, 720p, 1080i, 1080p, 1080p/24F / Audio  
Audio output (Coaxial digital)  
RCA jack x 1  
0.5 Vp-p (75 )  
USB terminal x 1  
LAN terminal  
5V  
500mA  
100BASE-T  
Note:  
• The specifications and design of this product are subject to change without notice.  
32  
Limited Warranty  
Limited United States Warranty for Digital Audio Video (“DAV”) Product  
Toshiba America Information Systems, Inc. (“TAIS”) makes the following limited warranties to original consumers in the  
United States. THESE LIMITED WARRANTIES EXTEND TO THE ORIGINAL CONSUMER PURCHASER OR ANY  
PERSON RECEIVING THIS DAV PRODUCT AS A GIFT FROM THE ORIGINAL CONSUMER PURCHASER AND TO  
NO OTHER PURCHASER ORTRANSFEREE. DAV PRODUCTS PURCHASED INTHE U.S.A.OR PUERTO RICO AND  
USED ANYWHERE OUTSIDE OFTHE U.S.A.OR PUERTO RICO, INCLUDING, WITHOUT LIMITATION, CANADA AND  
MEXICO, ARE NOT COVERED BY THESE WARRANTIES. DAV PRODUCTS PURCHASED ANYWHERE OUTSIDE  
OFTHE U.S.A. OR PUERTO RICO, INCLUDING, WITHOUT LIMITATION, CANADA AND MEXICO, AND USED INTHE  
U.S.A., ARE NOT COVERED BY THESE WARRANTIES.  
Limited 90-Day Warranty on Parts and Labor  
TAIS WARRANTS THIS PRODUCT AND ITS PARTS AGAINST DEFECTS IN MATERIALS OR WORKMANSHIP  
FOR A PERIOD OF 90-DAYS FROM THE DATE OF ORIGINAL RETAIL PURCHASE. DURING THIS PERIOD,TAIS  
WILL, AT TAIS’ SOLE DISCRETION, REPAIR OR REPLACE A DEFECTIVE PART/PRODUCT WITH A NEW OR  
REFURBISHED PART/PRODUCTWITHOUT CHARGETOYOU FOR PARTS OR LABOR. ANY PART OR PRODUCT  
REPLACED UNDERTHIS LIMITEDWARRANTY BECOMESTHE PROPERTY OFTAIS. IN SOME CASES,YOU MAY  
BE RESPONSIBLE FOR DELIVERING THE PRODUCT TO A SERVICE CENTER.  
Rental Units – The limited warranty period begins on the date of the first rental or thirty (30) days after the date of  
shipment to the rental firm, whichever comes first.  
Your Responsibility – Read the owner’s manual thoroughly before installing or operating this Product. Complete and  
Registration of your Product will enable TAIS to contact you in the unlikely event a safety notification is required under  
the U.S. Consumer Product Safety Act. Failure to complete and return the product registration card does not diminish  
your warranty rights.  
THE ABOVE WARRANTIES ARE SUBJECT TO THE FOLLOWING CONDITIONS:  
(1) This Limited Warranty is extended only to the original purchaser and only covers product purchased as new. (2) A  
purchase receipt or other proof of the original purchase date is required for warranty service. (3) All warranty servicing  
of this Product must be performed by an Authorized TAIS Service Provider. (4) The warranties from TAIS are effective  
only if this Product is purchased and operated in the U.S.A. or Puerto Rico. (5) Removal and reinstallation of product  
that is mounted in such a manner as to impede normal service is not covered under these warranties. This includes  
wall mounts, custom cabinets and other installation methods that do not provide for direct and immediate access to the  
product for service purposes. Labor service charges for set installation, setup, adjustment of customer controls, and  
installation or repair of antenna, satellite or cable systems are not covered by this limited warranty. (6) Reception or  
other problems caused by inadequate antenna systems, misaligned satellite dishes, improperly installed cable drops or  
use with non-standard signals or sources are your responsibility and are not covered by this limited warranty. (7) This  
limited warranty is void if the product is used outside the range of the temperature (heat/cold) and/or moisture operating  
conditions as outlined in the product’s specification listed in the Owner’s manual, or if the product is exposed to excessive  
smoke, dust, or other airborne contaminants or environmental conditions. (8) Warranties extend only to defects in  
materials or workmanship as limited above, and do not extend to any Product or parts that have been lost or discarded  
by you or to damage to the Product or parts caused by fires, misuse, abuse, accident, Acts of God (such as lightning or  
fluctuations in electric power), improper installation, improper maintenance, or use in violation of instructions furnished  
by TAIS; use or malfunction through simultaneous use of this Product and connected equipment; or to units that have  
been modified or had the serial number removed, altered, defaced, or rendered illegible. (9) Product purchased “AS-IS”  
or “With known faults, defects or problems” are not covered by this limited warranty. (10) Product previously owned or  
registered by a consumer and resold is not covered by this limited warranty. (11) Product that is refurbished and resold  
is not covered under this limited warranty.  
How to Obtain Warranty Services  
After following all of the operating instructions in the Owner’s manual, review the section entitled “Concierge” located on  
provided on the web site or please contactTAISConsumer Solution Center toll free at 1-800-631-3811. You must present  
upon request your original bill of sale or other proof of purchase including the serial number for in warranty service.  
ALLWARRANTIES IMPLIED BYTHE LAW OF ANY STATE OFTHE U.S.A., INCLUDINGTHE IMPLIEDWARRANTIES  
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY LIMITED TO THE  
DURATION OFTHE LIMITED WARRANTIES SET FORTH ABOVE.WITHTHE EXCEPTION OF ANY WARRANTIES  
IMPLIED BY THE LAW OF ANY STATE OF THE U.S.A. AS HEREBY LIMITED, THE FOREGOING LIMITED  
WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, GUARANTEES, AGREEMENTS, AND  
SIMILAR OBLIGATIONS OF TAIS WITH RESPECT TO THE REPAIR OR REPLACEMENT OF ANY PARTS. IN NO  
EVENT SHALL TAIS BE LIABLE FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES (INCLUDING, BUT NOT  
LIMITED TO, LOST PROFITS, BUSINESS INTERRUPTION, OR MODIFICATION OR ERASURE OF RECORDED  
33  
Limited Warranty  
DATA CAUSED BY USE, MISUSE OR INABILITY TO  
USE THIS PRODUCT).  
agreement between you and Toshiba Corporation  
(“Toshiba”) with regard to the copyrighted Software  
provided with this EULA. Use of any software and related  
documentation (“Software”) provided with a Toshiba Blu-  
ray Disc™ Player, or made available by downloading or  
otherwise to you by Toshiba in whatever form or media,  
will constitute your acceptance of these terms, unless  
separate terms are provided by the software supplier or  
Toshiba in the documentation accompanying the Toshiba  
Blu-ray Disc™ Player or otherwise, in which case certain  
additional or different terms may apply. If you do not agree  
with the terms of this EULA, do not use, download, install  
or copy the Software. If you wish to return a complete  
Blu-ray Disc™ Player system (hardware and software),  
contact the retailer where you purchased the Blu-ray  
Disc™ Player, and comply with the retailer’s standard  
return policies and procedures.  
No person, agent, distributor, dealer or company is  
authorized to change, modify or extend the terms of  
these warranties in any manner whatsoever. The time  
within which an action must be commenced to enforce  
any obligation of TAIS arising under this limited warranty  
or under any statute, or law of the United States or any  
state thereof, is hereby limited to ninety (90) days from the  
date you discover or should have discovered, the defect.  
This limitation does not apply to implied warranties arising  
under the law of any state of the U.S.A.  
THIS LIMITED WARRANTY GIVES YOU SPECIFIC  
LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER  
RIGHTS WHICH MAY VARY FROM STATE TO STATE  
IN THE U.S.A. SOME STATES OF THE U.S.A. DO  
NOT ALLOW LIMITATIONS ON THE DURATION OF  
AN IMPLIED WARRANTY, WHEN AN ACTION MAY  
BE BROUGHT, OR THE EXCLUSION OR LIMITATION  
OF INCIDENTAL OR CONSEQUENTIAL DAMAGES.  
THEREFORE, THE ABOVE PROVISIONS MAY NOT  
APPLY TOYOU UNDER SUCH CIRCUMSTANCES.  
Article 1 Definition  
The Software means all programs contained in the  
Toshiba Blu-ray Disc™ Player. The copyright of the  
Software belongs to Toshiba and/or its suppliers,  
including BSQUARE Corporation and/or its suppliers.  
The Software is protected by copyright laws, Universal  
Copyright Convention, and other laws and conventions  
related to intellectual property rights. The content of the  
Software and manual is subject to change by Toshiba  
without notice.  
Disclaimer  
BDX2150 requires a wireless adapter - sold separately.  
1080p capable display required for viewing in 1080p.  
Viewing HD content and up-converting DVD content may  
require an HDCP capable input on your display device.  
While up-converting DVD video content may result in a  
picture that appears to be near HD quality, results may  
vary depending on content, display and settings. Feature  
performance may vary and may also require an always-  
on broadband internet connection. Firmware update and  
additional bandwidth may be required.BD-Live™ requires  
connection of a USB flash drive of at least 1 GB (sold  
separately) to USB port. BD-Live™ is only supported  
via Ethernet so when using single USB port for internet  
access, BD-Live™ will not be available. Performance  
of interactive features may vary due to disc design or  
content, and may also require an always-on broadband  
internet connection. Firmware update may be required  
for some interactive features. Some features may require  
additional bandwidth. Internet services are available only  
in the United States. Third party internet services are not  
provided by Toshiba, may change or be discontinued at  
any time and may be subject to third party restrictions.  
Toshiba makes no representations or warranties about  
these services, which may require the creation of a user  
account through a computer with internet access. Third  
party internet service users may incur one-time and/  
or recurring charges. For Dolby® TrueHD and DTS-HD  
Master Audio | Essential™ playback, content encoded in  
Dolby® TrueHD and DTS-HD Master Audio | Essential™  
format required. Viewing 1080p/24 fps output requires  
1080p/24 fps encoded content and an HD display capable  
of accepting a 1080p/24Hz signal. Supported file types:  
JPEG, MP3, WMA, and AVCHD. Some recordable media,  
cards or files may not be supported.Product specifications,  
information and availability are all subject to change  
without notice.  
Article 2 License Grant and Use Conditions  
Toshiba grants to you a personal, non-transferable and  
non-exclusive right to use the copy of the Software in  
accordance with this EULA.You may permanently transfer  
all of your rights under this EULA, provided you transfer  
complete Blu-ray Disc™ Player together with all of the  
Software, you retain no copies, and the recipient agrees  
to the terms of this EULA. If the Software is an upgrade  
version, any transfer must include all prior versions of the  
Software. For maintenance purposes, you may update  
the version of the Software only for the Blu-ray Disc™  
Player that is owned by you.  
Article 3 Prohibited Uses  
Unless otherwise expressly provided in this EULA or  
the product manual accompanying the Toshiba Blu-ray  
Disc™ Player:  
3.1. You may not copy the Software, in whole or in part,  
without express written permission by Toshiba and/or  
its suppliers.  
3.2. You may not assign, resell, distribute or sublicense  
the Software or a copy of the Software.  
3.3. You may not create, assign, resell, or sublicense  
secondary works of the Software without permission.  
3.4. You may not modify, analyze, reverse engineer,  
decompile or disassemble any part of the Software.  
3.5. You may not combine or incorporate the Software  
with or into any other application.  
3.6. You may not print the Software.  
Article 4 Disclaimer  
4.1. THE HARDWARE PRODUCT LIMITED WARRANTY  
IS SET FORTH IN THE DOCUMENTATION  
ACCOMPANYING THE HARDWARE PRODUCT.  
END USER LICENSE AGREEMENT  
4.2. THE SOFTWARE IS PROVIDED “AS-IS” AND “AS-  
AVAILABLE,”WITHOUTWARRANTIESOFANYKIND.  
This End User License Agreement (“EULA”) is a legal  
34  
ALL WARRANTIES AND CONDITIONS, EXPRESS  
OR IMPLIED, CONTRACTUAL OR STATUTORY,  
INCLUDING BUT NOT LIMITED TO, ANY IMPLIED  
WARRANTIES OF MERCHANTABILITY OR  
FITNESS FOR A PARTICULAR PURPOSE, TITLE  
OR NON-INFRINGEMENT ARE HEREBY WAIVED  
BY YOU AND DISCLAIMED BY TOSHIBA.THIS  
EULA REPRESENTS THE SOLE AND EXCLUSIVE  
OBLIGATION OF TOSHIBA AND ITS SUPPLIERS  
WITH RESPECT TO THE SOFTWARE.  
Copyright© 1995-200[7] Adobe Systems Incorporated.  
All rights reserved. Macromedia, Flash, Macromedia  
Flash, [and Macromedia Flash Lite] are trademarks or  
registered trademarks of Adobe Systems Incorporated in  
the United States and other countries.  
License information on the software used in the  
TOSHIBA Blu-ray Disc™ player  
This document is statement purpose only. Not concerned  
with operation of this product.  
The software pre-installed in the TOSHIBA Blu-ray  
Disc™ player consists of multiple, independent software  
components. Each software component is copyrighted by  
TOSHIBA or a third party.  
Article 5 Limitation of Liability  
TO THE MAXIMUM EXTENT NOT PROHIBITED BY  
APPLICABLE LAW, IN NO EVENT SHALL TOSHIBA  
AND/OR ITS SUPPLIERS BE LIABLE FOR PERSONAL  
INJURY, OR ANY INCIDENTAL, SPECIAL, INDIRECT,  
The TOSHIBA Blu-ray Disc™ player uses software  
components that are distributed as freeware under a  
third-party end-user license agreement or copyright  
notice (hereinafter referred to as a “EULA”).  
PUNITIVE  
OR  
CONSEQUENTIAL  
DAMAGES  
WHATSOEVER, INCLUDING, WITHOUT LIMITATION,  
DAMAGES FOR LOSS OF PROFITS, LOSS OF  
DATA, BUSINESS INTERRUPTION, OR ANY OTHER  
COMMERNCIAL DAMAGES OR LOSSES, ARISING  
OUT OF OR RELATED TO YOUR USE OR INABILITY  
TO USE THE SOFTWARE, HOWEVER CAUSED,  
REGARDLESS OF THE THEORY OF LIABILITY  
(CONTRACT, TORT, OR OTHERWISE) AND EVEN  
IF TOSHIBA AND/OR ITS SUPPLIERS HAS BEEN  
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.  
SOME JURISDICTIONS DO NOT ALLOW THE  
LIMITATIONOFLIABILITYFORPERSONALINJURY, OR  
FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES;  
THEREFORE, THE ABOVE LIMITATIONS MAY NOT  
APPLY TO YOU UNDER SUCH CIRCUMSTANCES.  
THE AGGREGATE LIABILITY OF TOSHIBA AND ITS  
SUPPLIERS IN CONNECTION WITH THE SOFTWARE,  
REGARDLESS OFTHE FORM OF ANY LEGAL ACTION  
OR PROCEEDING, SHALL BE LIMITED TO DIRECT  
DAMAGES NOT TO EXCEED THE AMOUNT PAID FOR  
THE TOSHIBA BLU-RAY PLAYER.  
Some EULAs require that the source code of the  
applicable component be disclosed as the condition for  
distributing the software component in executable format.  
You can check the software components subject to such  
EULA requirements on the following phone number:  
Phone number: 1-800-631-3811  
TOSHIBA provides a warranty for the TOSHIBA Blu-ray  
Disc™ player you have purchased under conditions set  
forth by TOSHIBA.  
However, some of the software components distributed  
under an EULA are made available for use by the user  
on the assumption that they are not copyrighted or  
warranted by TOSHIBA or any third party.These software  
components are licensed to the user free of charge and  
therefore not covered by any warranty within the scope of  
the applicable laws. These software components are not  
subject to any copyrights or other third-party rights and are  
provided in “as is” condition without any warranty, whether  
express or implied. “Warranty” here includes, but not  
limited to, an implied warranty for marketability or fitness  
for specific uses. All risks associated with the quality or  
performance of these software components are assumed  
by the user. TOSHIBA shall not be liable whatsoever  
for any cost of repair or correction or other incidental  
expense incurred in connection with a defect found in any  
of these software components. Unless specified under  
the applicable laws or in a written agreement, a party who  
changes or redistributes the software with consent from  
the copyright holders or based on the aforementioned  
licenses shall not be held liable whatsoever for any loss  
arising from the use of or inability to use such software  
components. The same applies even when the copyright  
holders or relevant third parties have been informed of  
the possibility of such loss. “Loss” here includes normal,  
special, incidental and indirect loss (including, but not  
limited to, the loss of data or its accuracy; loss incurred by  
the user or any third party; and interface incompatibility  
with other software). Please read each EULA for details  
on the use conditions and items that must be observed  
regarding these software components.  
Article 6 Export Control  
Any export, directly or indirectly, of the Software in  
contravention of the United States Export Administration  
Regulations, or any other applicable law, regulation, or  
order, is prohibited.  
Article 7 Termination of License  
In the event that you fail to comply with any of the terms  
and conditions contained herein, Toshiba shall have the  
right to immediately terminate this Agreement without any  
notification to you. Upon termination of this Agreement,  
you shall cease all use of the Software and destroy all  
copies, in whole and/or in part.  
Article 8 Governing Law  
This EULA is governed by the laws of Japan, without  
references to the conflict of laws principles. Any and all  
disputes arising hereunder shall be resolved exclusively  
by the Tokyo District Court, Japan, and you hereby  
consent to the exclusive jurisdiction of such court.  
Article 9 Severability  
If any provision of this EULA shall be held to be invalid,  
illegal or unenforceable, the validity, legality and  
enforceability of the remaining provisions hereof shall not  
in any way be affected or impaired.  
The table below lists the software components pre-  
installed in the TOSHIBA Blu-ray Disc™ player, which are  
subject to EULAs. The user should read the applicable  
EULAs carefully before using these software components.  
The EULAs are exhibited in their original text (English)  
as exactly written by the respective parties other than  
TOSHIBA.  
(C) 2001-2010 Toshiba Corporation  
The Software contains Macromedia® [Flash®] [Flash  
Lite™] technology of Adobe Systems Incorporated.  
35  
Open-Source Software Included in the Blu-ray  
Disc™ Player:  
Open-Source Software Included in the Kernel/Rootfs:  
(*= source must be distributed on request)  
A copy of the GPL license is provided in Appendix K  
A copy of the LGPL license is provided in Appendix L  
Software  
License (*= source must be distributed  
on request)  
Utility  
Base Version  
License  
GPL 2.0  
GPL 2.0  
GPL 2.0  
GPL 2.0  
GPL 2.0  
GPL 2.0  
GPL 2.0  
GPL 2.0  
GPL 2.0  
GPL 2.0  
GPL 2.0  
GPL 2.0  
GPL 2.0  
GPL 2.0  
GPL 2.0  
GPL 2.0  
GPL 2.0  
GPL 2.0  
GPL 2.0  
GPL 2.0  
GPL 2.0  
GPL 2.0  
GPL 2.0  
GPL 2.0  
GPL 2.0  
zlib license  
A copy of the GPL2.0 license is provided in Appendix K  
A copy of the LGPL2.1 license is provided in Appendix L  
*kernel  
*arp  
net-tools-1.52  
GNU Bash-3.2  
cramfs  
*backtrace  
GPL2  
*bash  
*directfb-extra GPL2  
*cramfsck  
*dhcpcd  
*e2fsprogs  
*fdisk  
*cairo  
LGPL2  
GPL2  
dhcpcd-1.3  
e2fsprogs-1.41.5  
fdisk-2.10m  
TinyLogin-0.80  
sysutils  
*directfb  
*iconv  
LGPL2  
openssl  
BSD-old dual license.  
The terms and conditions which apply to  
this software are provided in Appendix H.  
This product includes software developed  
by the OpenSSL Project for use in the  
OpenSSL Toolkit  
*getty  
*hostname sysutils  
*ifconfig  
*kill  
net-tools-1.52  
sysutils  
(http://www.openssl.org)  
*mkcramfs  
*ntfs-3g  
cramfs  
curl  
The terms and conditions which apply to  
this software are provided in Appendix A.  
ntfs-3g 2009.4.4  
TinyLogin-0.80  
sysutils  
*passwd  
*ps  
*freetype  
The terms and conditions which apply to  
this software are provided in Appendix G.  
Recommended advertisement is:  
Portions of this software are copyright ©  
<year> The FreeType  
*route  
net-tools-1.52  
sfdisk-3.07  
*sfdisk  
*shutdown  
*tinylogin  
*hotplug  
*utelnetd  
*procps  
sysutils  
reserved.  
TinyLogin-0.80  
hotplug-1.8  
utelnetd-0.1.3  
procps-3.2.8  
freetype-2.1.2  
GNU Bash-2.05  
GNU termcap 1.3  
zlib-1.2.3  
jpeg  
expat  
mng  
png  
xml  
The terms and conditions which apply to this  
software are provided in Appendix B.  
The terms and conditions which apply to  
this software are provided in Appendix I.  
*libfreetype.so.6.3.  
*libtermcap.so  
*libtermcap.so.2.0.8  
zlib  
The terms and conditions which apply to this  
software are provided in Appendix C.  
The terms and conditions which apply to this  
software are provided in Appendix D.  
The terms and conditions which apply to this  
software are provided in Appendix E.  
The terms and conditions which apply to this software are  
provided in Appendix F.  
zlib  
The terms and conditions which apply to  
this software are provided in Appendix F.  
libusb.so  
uClibc  
libusb-0.1.12  
LGPL 2.1  
uClibc-nptl-0.9.29- LGPL 2.1  
20070423  
Elecktra  
Ping6  
Ping  
BSD-new  
BSD-new  
BSD-new  
BSD-new  
tcpdump  
tcpdump-4.0.0  
BSD-new  
The terms and conditions which apply to this software are  
provided in Appendix M.  
Tftp  
strace  
strace 4.5.18  
BSD-new  
Tracepath6  
Tracepath  
Traceroot6  
BSD-new  
BSD-new  
BSD-new  
The terms and conditions which apply to this software are  
provided in Appendix M.  
hdparm  
hdparm-6.9  
BSD-new  
Unzip  
Vedit  
Vi  
BSD-new  
BSD-new  
BSD-new  
The terms and conditions which apply to this software are  
provided in Appendix M.  
libpcap  
libcap-1.0.0  
BSD-new  
The terms and conditions which apply to this software are  
provided in Appendix M.  
View  
Ltdl  
BSD-new  
LPGL  
portmap  
portmap  
BSD-old  
fontconfig  
pixman  
The terms and conditions which apply to this software are  
provided in Appendix J.  
qlite  
Advertising sentence is:  
Copyright (c) 1990 The Regents  
of the University of California. All  
rights reserved.  
malloc-extras  
xslt  
init  
openssl  
openssl 0.9.8k  
BSD-old. See  
advertisement  
notice above.  
nandtest  
36  
Utility  
License  
Utility  
agetty  
awk  
License  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
Utility  
nice  
License  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
pata_platform.ko  
scsi_wait_scan.ko  
Badblocks  
compile_et  
e2fsck  
GPL  
od  
GPL  
cat  
pivot_root  
printenv  
printf  
pwd  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.1  
GPL2.1  
GPL2.1  
Unique license  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
GPL2.0  
chgrp  
chmod  
chown  
chroot  
cmp  
flash_erase  
flash_eraseall  
flash_info  
fsck  
readlink  
reboot  
renice  
rmdir  
rm  
cp  
cut  
geneccerror  
hdparm  
date  
dd  
rmmod  
samba  
sdiff  
hotplog  
df  
libcom_err  
libe2p  
diff3  
diff  
sed  
libext2fs  
dirname  
dmesg  
du  
seq  
libgcc_s  
simpleinit  
sleep  
sort  
libnandutils  
libproc  
echo  
egrep  
env  
nanddump  
nandwrite  
netstat  
stty  
swapoff  
swapon  
sync  
expr  
ntpdate  
false  
fgrep  
find  
top  
syslogd  
tail  
tune2fs  
ubiattach  
ubicrc32  
ubidetach  
ubiformat  
ubimkvol  
ubinfo  
free  
tar  
gawk  
grep  
tee  
touch  
tr  
gunzip  
gzexe  
gzip  
true  
tty  
ubinize  
head  
hexdump  
hostname  
id  
umount  
unnamed  
uniq  
ubirename  
ubirmvol  
ubiupdatevol  
vmstat  
unzip  
wc  
install  
kill  
libusb-config  
libusbpp  
libuuid  
which  
whoami  
xargs  
yes  
klogd  
ln  
Tip  
logger  
login  
ls  
Unzip  
zcat  
brcm_wifi.hotplug  
hostname  
libss  
zcmp  
zdiff  
lsmod  
lzo  
zforce  
zgrep  
zmore  
znew  
libstdc++  
mk_cmds  
mke2fs  
md5sum  
mkdir  
mknod  
mkswap  
modprobe  
more  
mount  
mv  
mklost+found  
mount.hotplug  
mtdinfo  
nandsim.ko  
tftpd  
ncurses  
37  
Luxi Font Copyright  
Luxi fonts copyright (c) 2001 by Bigelow & Holmes Inc. Luxi font instruction code copyright (c) 2001 by URW++ GmbH.  
All Rights Reserved. Luxi is a registered trademark of Bigelow & Holmes Inc. Permission is hereby granted, free of  
charge, to any person obtaining a copy of these Fonts and associated documentation files (the “Font Software”), to  
deal in the Font Software, including without limitation the rights to use, copy, merge, publish, distribute, sublicense, and/  
or sell copies of the Font Software, and to permit persons to whom the Font Software is furnished to do so, subject to  
the following conditions:  
The above copyright and trademark notices and this permission notice shall be included in all copies of one or more  
of the Font Software.  
The Font Software may not be modified, altered, or added to, and in particular the designs of glyphs or characters in the  
Fonts may not be modified nor may additional glyphs or characters be added to the Fonts. This License becomes null  
and void when the Fonts or Font Software have been modified.  
THE FONT SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED,  
INCLUDING BUT NOT LIMITED TO ANY WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR  
PURPOSE AND NONINFRINGEMENT OF COPYRIGHT, PATENT, TRADEMARK, OR OTHER RIGHT. IN NO EVENT  
SHALL BIGELOW & HOLMES INC. OR URW++ GMBH. BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER  
LIABILITY, INCLUDING ANY GENERAL, SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES,  
WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF THE USE OR  
INABILITY TO USE THE FONT SOFTWARE OR FROM OTHER DEALINGS IN THE FONT SOFTWARE.  
Except as contained in this notice, the names of Bigelow & Holmes Inc. and URW++ GmbH. shall not be used in  
advertising or otherwise to promote the sale, use or other dealings in this Font Software without prior written  
authorization from Bigelow & Holmes Inc. and URW++ GmbH.  
For further information, contact:  
Appendix A - CURL license  
COPYRIGHT AND PERMISSION NOTICE  
Copyright (c) 1996 - 2009, Daniel Stenberg, <[email protected]>.  
All rights reserved.  
Permission to use, copy, modify, and distribute this software for any purpose with or without fee is hereby granted,  
provided that the above copyright notice and this permission notice appear in all copies.  
THE SOFTWARE IS PROVIDED „AS IS“, WITHOUTWARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING  
BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND  
NONINFRINGEMENT OFTHIRD PARTY RIGHTS.IN NO EVENT SHALLTHE AUTHORS OR COPYRIGHT HOLDERS  
BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT  
OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER  
DEALINGS IN THE SOFTWARE.  
Except as contained in this notice, the name of a copyright holder shall not be used in advertising or otherwise to  
promote the sale, use or other dealings in this Software without prior written authorization of the copyright holder.  
Appendix B - JPEG License  
LEGAL ISSUES  
============  
In plain English:  
1. We don’t promise that this software works. (But if you find any bugs, please let us know!)  
2. You can use this software for whatever you want. You don’t have to pay us.  
3. You may not pretend that you wrote this software. If you use it in a program, you must acknowledge somewhere in  
your documentation that you’ve used the IJG code.  
In legalese:  
The authors make NO WARRANTY or representation, either express or implied, with respect to this software, its quality,  
accuracy, merchantability, or fitness for a particular purpose. This software is provided “AS IS”, and you, its user,  
assume the entire risk as to its quality and accuracy.  
This software is copyright (C) 1991-1998, Thomas G. Lane.  
All Rights Reserved except as specified below.  
Permission is hereby granted to use, copy, modify, and distribute this software (or portions thereof) for any purpose,  
without fee, subject to these conditions:  
(1) If any part of the source code for this software is distributed, then this README file must be included, with this  
copyright and no-warranty notice unaltered; and any additions, deletions, or changes to the original files must be  
clearly indicated in accompanying documentation.  
(2) If only executable code is distributed, then the accompanying documentation must state that “this software is based  
38  
in part on the work of the Independent JPEG Group”.  
(3) Permission for use of this software is granted only if the user accepts full responsibility for any undesirable  
consequences; the authors accept NO LIABILITY for damages of any kind.  
These conditions apply to any software derived from or based on the IJG code, not just to the unmodified library. If you  
use our work, you ought to acknowledge us.  
Permission is NOT granted for the use of any IJG author’s name or company name in advertising or publicity relating  
to this software or products derived from it. This software may be referred to only as “the Independent JPEG Group’s  
software”.  
We specifically permit and encourage the use of this software as the basis of commercial products, provided that all  
warranty or liability claims are assumed by the product vendor.  
Appendix C - MNG License  
/* *********************************************************************************************************************************  
COPYRIGHT NOTICE:  
Copyright (c) 2000 Gerard Juyn ([email protected])  
[You may insert additional notices after this sentence if you modify this source]  
For the purposes of this copyright and license, “Contributing Authors” is defined as the following set of individuals:  
Gerard Juyn  
The MNG Library is supplied “AS IS”. The Contributing Authors disclaim all warranties, expressed or implied, including,  
without limitation, the warranties of merchantability and of fitness for any purpose. The Contributing Authors assume  
no liability for direct, indirect, incidental, special, exemplary, or consequential damages, which may result from the use  
of the MNG Library, even if advised of the possibility of such damage.  
Permission is hereby granted to use, copy, modify, and distribute this source code, or portions hereof, for any purpose,  
without fee, subject to the following restrictions:  
1. The origin of this source code must not be misrepresented; you must not claim that you wrote the original software.  
2. Altered versions must be plainly marked as such and must not be misrepresented as being the original source.  
3. This Copyright notice may not be removed or altered from any source or altered source distribution.  
The Contributing Authors specifically permit, without fee, and encourage the use of this source code as a component  
to supporting the MNG and JNG file format in commercial products. If you use this source code in a product,  
acknowledgment would be highly appreciated.  
Parts of this software have been adapted from the libpng package. Although this library supports all features from the  
PNG specification (as MNG descends from it) it does not require the libpng package. It does require the zlib library and  
optionally the IJG jpeg library, and/or the “little-cms” library by Marti Maria (depending on the inclusion of support for  
JNG and Full-Color-Management respectively.  
This library’s function is primarily to read and display MNG animations. It is not meant as a full-featured image-editing  
component! It does however offer creation and editing functionality at the chunk level. (future modifications may include  
some more support for creation and or editing)  
*/  
Appendix D - PNG License File Distribution Clause  
The Contributing Authors and Group 42, Inc. specifically permit, without fee, and encourage the use of this source code  
as a component to supporting the PNG file format in commercial products. If you use this source code in a product,  
acknowledgment is not required but would be appreciated.  
Appendix E – XML License  
Except where otherwise noted in the source code (e.g. the files hash.c, list.c and the trio files, which are covered by a  
similar licence but with different Copyright notices) all the files are:  
Copyright (C) 1998-2003 Daniel Veillard. All Rights Reserved.  
Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated  
documentation files (the “Software”), to deal in the Software without restriction, including without limitation the rights to  
use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to  
whom the Software is furnished to do so, subject to the following conditions:  
The above copyright notice and this permission notice shall be included in all copies or substantial portions of the  
Software.  
THE SOFTWARE IS PROVIDED “AS IS”, WITHOUTWARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING  
BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND  
NONINFRINGEMENT. IN NO EVENT SHALL THE DANIEL VEILLARD BE LIABLE FOR ANY CLAIM, DAMAGES OR  
OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF  
OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.  
39  
Except as contained in this notice, the name of Daniel Veillard shall not be used in advertising or otherwise to promote  
the sale, use or other dealings in this Software without prior written authorization from him.  
Appendix F – zlib Distribution Conditions  
This software is provided ‘as-is’, without any express or implied warranty. In no event will the authors be held liable for  
any damages arising from the use of this software.  
Permission is granted to anyone to use this software for any purpose, including commercial applications, and to alter it  
and redistribute it freely, subject to the following restrictions:  
1. The origin of this software must not be misrepresented; you must not claim that you wrote the original software. If  
you use this software in a product, an acknowledgment in the product documentation would be appreciated but is  
not required.  
2. Altered source versions must be plainly marked as such, and must not be misrepresented as being the original  
software.  
3. This notice may not be removed or altered from any source distribution.  
Jean-loup Gailly  
Mark Adler  
If you use the zlib library in a product, we would appreciate *not* receiving lengthy legal documents to sign.The sources  
are provided for free but without warranty of any kind. The library has been entirely written by Jean-loup Gailly and Mark  
Adler; it does not include third-party code.  
If you redistribute modified sources, we would appreciate that you include in the file ChangeLog history information  
documenting your changes. Please read the FAQ for more information on the distribution of modified source versions.  
Appendix G – Freetype License  
The FreeType Project LICENSE  
------------------------------------------  
2006-Jan-27  
Copyright 1996-2002, 2006 by  
David Turner, Robert Wilhelm, and Werner Lemberg  
Introduction  
=========  
The FreeType Project is distributed in several archive packages; some of them may contain, in addition to the FreeType  
font engine, various tools and contributions which rely on, or relate to, the FreeType Project.  
This license applies to all files found in such packages, and which do not fall under their own explicit license.The license  
affects thus the FreeType font engine, the test programs, documentation and makefiles, at the very least.  
This license was inspired by the BSD, Artistic, and IJG (Independent JPEG Group) licenses, which all encourage  
inclusion and use of free software in commercial and freeware products alike. As a consequence, its main points are  
that:  
o
o
o
We don’t promise that this software works. However, we will be interested in any kind of bug reports. (`as is’  
distribution)  
You can use this software for whatever you want, in parts or full form, without having to pay us. (`royalty-free’  
usage)  
You may not pretend that you wrote this software. If you use it, or only parts of it, in a program, you must acknowledge  
somewhere in your documentation that you have used the FreeType code. (`credits’)  
We specifically permit and encourage the inclusion of this software, with or without modifications, in commercial  
products. We disclaim all warranties covering The FreeType Project and assume no liability related to The FreeType  
Project.  
Finally, many people asked us for a preferred form for a credit/disclaimer to use in compliance with this license.We thus  
encourage you to use the following text:  
“””  
Portions of this software are copyright © <year> The FreeType Project (www.freetype.org). All rights reserved.  
“””  
Please replace <year> with the value from the FreeType version you actually use.  
Legal Terms  
=========  
0. Definitions  
-----------------  
Throughout this license, the terms `package’, `FreeType Project’, and `FreeType archive’ refer to the set of files  
originally distributed by the authors (David Turner, Robert Wilhelm, and Werner Lemberg) as the `FreeType Project’, be  
they named as alpha, beta or final release.  
40  
`You’ refers to the licensee, or person using the project, where `using’ is a generic term including compiling the project’s  
source code as well as linking it to form a `program’ or `executable’. This program is referred to as `a program using  
the FreeType engine’.  
This license applies to all files distributed in the original FreeType Project, including all source code, binaries and  
documentation, unless otherwise stated in the file in its original, unmodified form as distributed in the original archive. If  
you are unsure whether or not a particular file is covered by this license, you must contact us to verify this.  
The FreeType Project is copyright (C) 1996-2000 by David Turner, Robert Wilhelm, and Werner Lemberg. All rights  
reserved except as specified below.  
1. No Warranty  
-------------------  
THE FREETYPE PROJECT IS PROVIDED `AS IS’ WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR  
IMPLIED, INCLUDING, BUT NOT LIMITED TO, WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A  
PARTICULAR PURPOSE. IN NO EVENT WILL ANY OF THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE  
FOR ANY DAMAGES CAUSED BY THE USE OR THE INABILITY TO USE, OF THE FREETYPE PROJECT.  
2. Redistribution  
---------------------  
This license grants a worldwide, royalty-free, perpetual and irrevocable right and license to use, execute, perform,  
compile, display, copy, create derivative works of, distribute and sublicense the FreeType Project (in both source and  
object code forms) and derivative works thereof for any purpose; and to authorize others to exercise some or all of the  
rights granted herein, subject to the following conditions:  
o
Redistribution of source code must retain this license file (`FTL.TXT’) unaltered; any additions, deletions or changes  
to the original files must be clearly indicated in accompanying documentation.The copyright notices of the unaltered,  
original files must be preserved in all copies of source files.  
o
Redistribution in binary form must provide a disclaimer that states that the software is based in part of the work of  
the FreeType Team, in the distribution documentation. We also encourage you to put an URL to the FreeType web  
page in your documentation, though this isn’t mandatory.  
These conditions apply to any software derived from or based on the FreeType Project, not just the unmodified files. If  
you use our work, you must acknowledge us. However, no fee need be paid to us.  
3. Advertising  
------------------  
Neither the FreeType authors and contributors nor you shall use the name of the other for commercial, advertising, or  
promotional purposes without specific prior written permission.  
We suggest, but do not require, that you use one or more of the following phrases to refer to this software in your  
documentation or advertising materials: `FreeType Project’, `FreeType Engine’, `FreeType library’, or `FreeType  
Distribution’.  
As you have not signed this license, you are not required to accept it. However, as the FreeType Project is copyrighted  
material, only this license, or another one contracted with the authors, grants you the right to use, distribute, and modify  
it. Therefore, by using, distributing, or modifying the FreeType Project, you indicate that you understand and accept all  
the terms of this license.  
4. Contacts  
---------------  
There are two mailing lists related to FreeType:  
Discusses general use and applications of FreeType, as well as future and wanted additions to the library and  
distribution.  
If you are looking for support, start in this list if you haven’t found anything to help you in the documentation.  
Discusses bugs, as well as engine internals, design issues, specific licenses, porting, etc.  
--- end of FTL.TXT ---  
Appendix H – Openssl License  
LICENSE ISSUES  
==============  
The OpenSSL toolkit stays under a dual license, i.e. both the conditions of the OpenSSL License and the original  
SSLeay license apply to the toolkit.  
See below for the actual license texts. Actually both licenses are BSD-style Open Source licenses. In case of any  
license issues related to OpenSSL, please contact [email protected].  
41  
OpenSSL License  
------------------------  
/* ====================================================================  
Copyright (c) 1998-2008 The OpenSSL Project. All rights reserved.  
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following  
conditions are met:  
1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following  
disclaimer.  
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following  
disclaimer in the documentation and/or other materials provided with the distribution.  
3. All advertising materials mentioning features or use of this software must display the following acknowledgment:  
“This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit. (http://www.  
openssl.org/)”  
4. The names “OpenSSL Toolkit” and “OpenSSL Project” must not be used to endorse or promote products derived  
from this software without prior written permission. For written permission, please contact openssl-core@openssl.  
org.  
5. Products derived from this software may not be called “OpenSSLnor may “OpenSSLappear in their names without  
prior written permission * of the OpenSSL Project.  
6. Redistributions of any form whatsoever must retain the following acknowledgment: “This product includes software  
developed by the OpenSSL Project for use in the OpenSSL Toolkit (http://www.openssl.org/)”  
THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS’’ AND ANY EXPRESSED OR IMPLIED  
WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND  
FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT  
OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR  
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS  
OR SERVICES;LOSS OF USE, DATA, OR PROFITS;OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON  
ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE  
OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE  
POSSIBILITY OF SUCH DAMAGE.  
This product includes cryptographic software written by EricYoung ([email protected]).This product includes software  
written by Tim Hudson ([email protected]).  
*/  
Original SSLeay License  
--------------------------------  
/* Copyright (C) 1995-1998 Eric Young ([email protected])  
All rights reserved.  
This package is an SSL implementation written by Eric Young ([email protected]). The implementation was written  
so as to conform with Netscapes SSL.  
This library is free for commercial and non-commercial use as long as the following conditions are aheared to. The  
following conditions apply to all code found in this distribution, be it the RC4, RSA, lhash, DES, etc., code; not just the  
SSL code. The SSL documentation included with this distribution is covered by the same copyright terms except that  
the holder is Tim Hudson ([email protected]).  
Copyright remains EricYoung’s, and as such any Copyright notices in the code are not to be removed. If this package is  
used in a product, EricYoung should be given attribution as the author of the parts of the library used.This can be in the  
form of a textual message at program startup or in documentation (online or textual) provided with the package.  
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following  
conditions are met:  
1. Redistributions of source code must retain the copyright notice, this list of conditions and the following disclaimer.  
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following  
disclaimer in the documentation and/or other materials provided with the distribution.  
3. All advertising materials mentioning features or use of this software must display the following acknowledgement:  
“This product includes cryptographic software written by Eric Young ([email protected])”  
The word ‘cryptographic’ can be left out if the rouines from the library being used are not cryptographic related :-).  
4. If you include any Windows specific code (or a derivative thereof) from the apps directory (application code) you  
must include an acknowledgement: “This product includes software written by Tim Hudson ([email protected])”  
THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS’’ AND ANY EXPRESS OR IMPLIED WARRANTIES,  
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR  
A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE  
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES  
42  
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,  
DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,  
WHETHER IN CONTRACT, STRICT LIABILITY, ORTORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN  
ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.  
The licence and distribution terms for any publically available version or derivative of this code cannot be changed. i.e.  
this code cannot simply be copied and put under another distribution licence [including the GNU Public Licence.]  
*/  
Appendix I – Expat License  
Copyright (c) 1998, 1999, 2000 Thai Open Source Software Center Ltd and Clark Cooper Copyright (c) 2001, 2002,  
2003, 2004, 2005, 2006 Expat maintainers.  
Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated  
documentation files (the “Software”), to deal in the Software without restriction, including without limitation the rights to  
use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to  
whom the Software is furnished to do so, subject to the following conditions:  
The above copyright notice and this permission notice shall be included in all copies or substantial portions of the  
Software.  
THE SOFTWARE IS PROVIDED “AS IS”, WITHOUTWARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING  
BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND  
NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY  
CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,  
ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN  
THE SOFTWARE.  
Appendix J – Portmap License  
/*-  
Copyright (c) 1990 The Regents of the University of California. All rights reserved.  
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following  
conditions are met:  
1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following  
disclaimer.  
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following  
disclaimer in the documentation and/or other materials provided with the distribution.  
3. All advertising materials mentioning features or use of this software must display the following acknowledgement:  
This product includes software developed by the University of California, Berkeley and its contributors.  
4. Neither the name of the University nor the names of its contributors may be used to endorse or promote products  
derived from this software without specific prior written permission.  
THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS’’ AND ANY EXPRESS OR  
IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY  
AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS  
OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR  
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS  
OR SERVICES;LOSS OF USE, DATA, OR PROFITS;OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON  
ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE  
OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE  
POSSIBILITY OF SUCH DAMAGE.  
*/  
Appendix K – GNU GPL 2.0  
GNU GENERAL PUBLIC LICENSE  
Version 2, June 1991  
Copyright (C) 1989, 1991 Free Software Foundation, Inc.  
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA  
Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.  
Preamble  
The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU  
General Public License is intended to guarantee your freedom to share and change free software -- to make sure the  
software is free for all its users.This General Public License applies to most of the Free Software Foundation’s software  
and to any other program whose authors commit to using it. (Some other Free Software Foundation software is covered  
by the GNU Lesser General Public License instead.) You can apply it to your programs, too.  
43  
When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are designed to  
make sure that you have the freedom to distribute copies of free software (and charge for this service if you wish), that  
you receive source code or can get it if you want it, that you can change the software or use pieces of it in new free  
programs; and that you know you can do these things.  
To protect your rights, we need to make restrictions that forbid anyone to deny you these rights or to ask you to surrender  
the rights. These restrictions translate to certain responsibilities for you if you distribute copies of the software, or if you  
modify it.  
For example, if you distribute copies of such a program, whether gratis or for a fee, you must give the recipients all the  
rights that you have.You must make sure that they, too, receive or can get the source code. And you must show them  
these terms so they know their rights.  
We protect your rights with two steps: (1) copyright the software, and (2) offer you this license which gives you legal  
permission to copy, distribute and/or modify the software.  
Also, for each author’s protection and ours, we want to make certain that everyone understands that there is no  
warranty for this free software. If the software is modified by someone else and passed on, we want its recipients to  
know that what they have is not the original, so that any problems introduced by others will not reflect on the original  
authors’ reputations.  
Finally, any free program is threatened constantly by software patents. We wish to avoid the danger that redistributors  
of a free program will individually obtain patent licenses, in effect making the program proprietary. To prevent this, we  
have made it clear that any patent must be licensed for everyone’s free use or not licensed at all.  
The precise terms and conditions for copying, distribution and modification follow.  
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION  
0. This License applies to any program or other work which contains a notice placed by the copyright holder saying it  
may be distributed under the terms of this General Public License. The “Program”, below, refers to any such program  
or work, and a “work based on the Program” means either the Program or any derivative work under copyright law:  
that is to say, a work containing the Program or a portion of it, either verbatim or with modifications and/or translated  
into another language. (Hereinafter, translation is included without limitation in the term “modification”.) Each licensee  
is addressed as “you”.  
Activities other than copying, distribution and modification are not covered by this License; they are outside its scope.  
The act of running the Program is not restricted, and the output from the Program is covered only if its contents  
constitute a work based on the Program (independent of having been made by running the Program). Whether that is  
true depends on what the Program does.  
1.You may copy and distribute verbatim copies of the Program’s source code as you receive it, in any medium, provided  
that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of  
warranty; keep intact all the notices that refer to this License and to the absence of any warranty; and give any other  
recipients of the Program a copy of this License along with the Program.  
You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection  
in exchange for a fee.  
2.You may modify your copy or copies of the Program or any portion of it, thus forming a work based on the Program,  
and copy and distribute such modifications or work under the terms of Section 1 above, provided that you also meet  
all of these conditions:  
a) You must cause the modified files to carry prominent notices stating that you changed the files and the date of any  
change.  
b) You must cause any work that you distribute or publish, that in whole or in part contains or is derived from the  
Program or any part thereof, to be licensed as a whole at no charge to all third parties under the terms of this  
License.  
c) If the modified program normally reads commands interactively when run, you must cause it, when started running  
for such interactive use in the most ordinary way, to print or display an announcement including an appropriate  
copyright notice and a notice that there is no warranty (or else, saying that you provide a warranty) and that users  
may redistribute the program under these conditions, and telling the user how to view a copy of this License.  
(Exception: if the Program itself is interactive but does not normally print such an announcement, your work based  
on the Program is not required to print an announcement.)  
These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from  
the Program, and can be reasonably considered independent and separate works in themselves, then this License,  
and its terms, do not apply to those sections when you distribute them as separate works. But when you distribute the  
same sections as part of a whole which is a work based on the Program, the distribution of the whole must be on the  
terms of this License, whose permissions for other licensees extend to the entire whole, and thus to each and every  
part regardless of who wrote it.  
Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the  
intent is to exercise the right to control the distribution of derivative or collective works based on the Program.  
In addition, mere aggregation of another work not based on the Program with the Program (or with a work based on  
the Program) on a volume of a storage or distribution medium does not bring the other work under the scope of this  
License.  
44  
3.You may copy and distribute the Program (or a work based on it, under Section 2) in object code or executable form  
under the terms of Sections 1 and 2 above provided that you also do one of the following:  
a) Accompany it with the complete corresponding machine-readable source code, which must be distributed under the  
terms of Sections 1 and 2 above on a medium customarily used for software interchange; or,  
b) Accompany it with a written offer, valid for at least three years, to give any third party, for a charge no more than your  
cost of physically performing source distribution, a complete machine-readable copy of the corresponding source  
code, to be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software  
interchange; or,  
c) Accompany it with the information you received as to the offer to distribute corresponding source code. (This  
alternative is allowed only for noncommercial distribution and only if you received the program in object code or  
executable form with such an offer, in accord with Subsection b above.)  
The source code for a work means the preferred form of the work for making modifications to it. For an executable work,  
complete source code means all the source code for all modules it contains, plus any associated interface definition  
files, plus the scripts used to control compilation and installation of the executable. However, as a special exception,  
the source code distributed need not include anything that is normally distributed (in either source or binary form) with  
the major components (compiler, kernel, and so on) of the operating system on which the executable runs, unless that  
component itself accompanies the executable.  
If distribution of executable or object code is made by offering access to copy from a designated place, then offering  
equivalent access to copy the source code from the same place counts as distribution of the source code, even though  
third parties are not compelled to copy the source along with the object code.  
4.You may not copy, modify, sublicense, or distribute the Program except as expressly provided under this License. Any  
attempt otherwise to copy, modify, sublicense or distribute the Program is void, and will automatically terminate your  
rights under this License. However, parties who have received copies, or rights, from you under this License will not  
have their licenses terminated so long as such parties remain in full compliance.  
5.You are not required to accept this License, since you have not signed it. However, nothing else grants you permission  
to modify or distribute the Program or its derivative works. These actions are prohibited by law if you do not accept this  
License. Therefore, by modifying or distributing the Program (or any work based on the Program), you indicate your  
acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying the Program  
or works based on it.  
6. Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a  
license from the original licensor to copy, distribute or modify the Program subject to these terms and conditions. You  
may not impose any further restrictions on the recipients’ exercise of the rights granted herein.You are not responsible  
for enforcing compliance by third parties to this License.  
7. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to  
patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the  
conditions of this License, they do not excuse you from the conditions of this License. If you cannot distribute so as to  
satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence  
you may not distribute the Program at all. For example, if a patent license would not permit royalty-free redistribution of  
the Program by all those who receive copies directly or indirectly through you, then the only way you could satisfy both  
it and this License would be to refrain entirely from distribution of the Program.  
If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the  
section is intended to apply and the section as a whole is intended to apply in other circumstances.  
It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest  
validity of any such claims; this section has the sole purpose of protecting the integrity of the free software distribution  
system, which is implemented by public license practices. Many people have made generous contributions to the wide  
range of software distributed through that system in reliance on consistent application of that system; it is up to the  
author/donor to decide if he or she is willing to distribute software through any other system and a licensee cannot  
impose that choice.  
This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License.  
8. If the distribution and/or use of the Program is restricted in certain countries either by patents or by copyrighted  
interfaces, the original copyright holder who places the Program under this License may add an explicit geographical  
distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus  
excluded. In such case, this License incorporates the limitation as if written in the body of this License.  
9. The Free Software Foundation may publish revised and/or new versions of the General Public License from time to  
time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems  
or concerns.  
Each version is given a distinguishing version number. If the Program specifies a version number of this License which  
applies to it and “any later version”, you have the option of following the terms and conditions either of that version or of  
any later version published by the Free Software Foundation. If the Program does not specify a version number of this  
License, you may choose any version ever published by the Free Software Foundation.  
10. If you wish to incorporate parts of the Program into other free programs whose distribution conditions are different,  
write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to  
the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals  
45  
of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software  
generally.  
NO WARRANTY  
11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM,  
TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE  
COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM “AS IS” WITHOUT WARRANTY OF  
ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES  
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY  
AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU  
ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.  
12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY  
COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS  
PERMITTED ABOVE, BE LIABLETOYOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR  
CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING  
BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY  
YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS),  
EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.  
END OF TERMS AND CONDITIONS  
Appendix L – GNU LGPL 2.1  
GNU LESSER GENERAL PUBLIC LICENSE  
Version 2.1, February 1999  
Copyright (C) 1991, 1999 Free Software Foundation, Inc.  
59 Temple Place, Suite 330, Boston, MA 02111-1307 USA  
Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.  
[This is the first released version of the Lesser GPL. It also counts as the successor of the GNU Library Public License,  
version 2, hence the version number 2.1.]  
Preamble  
The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU  
General Public Licenses are intended to guarantee your freedom to share and change free software -- to make sure  
the software is free for all its users.  
This license, the Lesser General Public License, applies to some specially designated software packages -- typically  
libraries -- of the Free Software Foundation and other authors who decide to use it.You can use it too, but we suggest  
you first think carefully about whether this license or the ordinary General Public License is the better strategy to use in  
any particular case, based on the explanations below.  
When we speak of free software, we are referring to freedom of use, not price. Our General Public Licenses are  
designed to make sure that you have the freedom to distribute copies of free software (and charge for this service if you  
wish); that you receive source code or can get it if you want it; that you can change the software and use pieces of it in  
new free programs; and that you are informed that you can do these things.  
To protect your rights, we need to make restrictions that forbid distributors to deny you these rights or to ask you to  
surrender these rights.These restrictions translate to certain responsibilities for you if you distribute copies of the library  
or if you modify it.  
For example, if you distribute copies of the library, whether gratis or for a fee, you must give the recipients all the rights  
that we gave you.You must make sure that they, too, receive or can get the source code. If you link other code with the  
library, you must provide complete object files to the recipients, so that they can relink them with the library after making  
changes to the library and recompiling it. And you must show them these terms so they know their rights.  
We protect your rights with a two-step method: (1) we copyright the library, and (2) we offer you this license, which gives  
you legal permission to copy, distribute and/or modify the library.  
To protect each distributor, we want to make it very clear that there is no warranty for the free library. Also, if the library  
is modified by someone else and passed on, the recipients should know that what they have is not the original version,  
so that the original author’s reputation will not be affected by problems that might be introduced by others.  
Finally, software patents pose a constant threat to the existence of any free program. We wish to make sure that a  
company cannot effectively restrict the users of a free program by obtaining a restrictive license from a patent holder.  
Therefore, we insist that any patent license obtained for a version of the library must be consistent with the full freedom  
of use specified in this license.  
Most GNU software, including some libraries, is covered by the ordinary GNU General Public License. This license,  
the GNU Lesser General Public License, applies to certain designated libraries, and is quite different from the ordinary  
General Public License. We use this license for certain libraries in order to permit linking those libraries into non-free  
programs.  
46  
When a program is linked with a library, whether statically or using a shared library, the combination of the two is legally  
speaking a combined work, a derivative of the original library. The ordinary General Public License therefore permits  
such linking only if the entire combination fits its criteria of freedom. The Lesser General Public License permits more  
lax criteria for linking other code with the library.  
We call this license the “Lesser” General Public License because it does Less to protect the user’s freedom than the  
ordinary General Public License. It also provides other free software developers Less of an advantage over competing  
non-free programs.These disadvantages are the reason we use the ordinary General Public License for many libraries.  
However, the Lesser license provides advantages in certain special circumstances.  
For example, on rare occasions, there may be a special need to encourage the widest possible use of a certain library,  
so that it becomes a de-facto standard. To achieve this, non-free programs must be allowed to use the library. A more  
frequent case is that a free library does the same job as widely used non-free libraries. In this case, there is little to gain  
by limiting the free library to free software only, so we use the Lesser General Public License.  
In other cases, permission to use a particular library in non-free programs enables a greater number of people to use  
a large body of free software. For example, permission to use the GNU C Library in non-free programs enables many  
more people to use the whole GNU operating system, as well as its variant, the GNU/Linux operating system.  
Although the Lesser General Public License is Less protective of the users’ freedom, it does ensure that the user of  
a program that is linked with the Library has the freedom and the wherewithal to run that program using a modified  
version of the Library.  
The precise terms and conditions for copying, distribution and modification follow. Pay close attention to the difference  
between a “work based on the library” and a “work that uses the library”. The former contains code derived from the  
library, whereas the latter must be combined with the library in order to run.  
GNU LESSER GENERAL PUBLIC LICENSE  
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION  
0. This License Agreement applies to any software library or other program which contains a notice placed by the  
copyright holder or other authorized party saying it may be distributed under the terms of this Lesser General Public  
License (also called “this License”). Each licensee is addressed as “you”.  
A “library” means a collection of software functions and/or data prepared so as to be conveniently linked with application  
programs (which use some of those functions and data) to form executables.  
The “Library”, below, refers to any such software library or work which has been distributed under these terms. A  
“work based on the Library” means either the Library or any derivative work under copyright law: that is to say, a work  
containing the Library or a portion of it, either verbatim or with modifications and/or translated straightforwardly into  
another language. (Hereinafter, translation is included without limitation in the term “modification”.)  
“Source code” for a work means the preferred form of the work for making modifications to it. For a library, complete  
source code means all the source code for all modules it contains, plus any associated interface definition files, plus the  
scripts used to control compilation and installation of the library.  
Activities other than copying, distribution and modification are not covered by this License; they are outside its scope.  
The act of running a program using the Library is not restricted, and output from such a program is covered only if its  
contents constitute a work based on the Library (independent of the use of the Library in a tool for writing it). Whether  
that is true depends on what the Library does and what the program that uses the Library does.  
1.You may copy and distribute verbatim copies of the Library’s complete source code as you receive it, in any medium,  
provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer  
of warranty; keep intact all the notices that refer to this License and to the absence of any warranty; and distribute a  
copy of this License along with the Library.  
You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection  
in exchange for a fee.  
2.You may modify your copy or copies of the Library or any portion of it, thus forming a work based on the Library, and  
copy and distribute such modifications or work under the terms of Section 1 above, provided that you also meet all of  
these conditions:  
a) The modified work must itself be a software library.  
b) You must cause the files modified to carry prominent notices stating that you changed the files and the date of any  
change.  
c) You must cause the whole of the work to be licensed at no charge to all third parties under the terms of this  
License.  
d) If a facility in the modified Library refers to a function or a table of data to be supplied by an application program that  
uses the facility, other than as an argument passed when the facility is invoked, then you must make a good faith  
effort to ensure that, in the event an application does not supply such function or table, the facility still operates, and  
performs whatever part of its purpose remains meaningful.  
(For example, a function in a library to compute square roots has a purpose that is entirely well-defined independent of  
the application. Therefore, Subsection 2d requires that any application-supplied function or table used by this function  
must be optional: if the application does not supply it, the square root function must still compute square roots.)  
47  
These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the  
Library, and can be reasonably considered independent and separate works in themselves, then this License, and its  
terms, do not apply to those sections when you distribute them as separate works. But when you distribute the same  
sections as part of a whole which is a work based on the Library, the distribution of the whole must be on the terms  
of this License, whose permissions for other licensees extend to the entire whole, and thus to each and every part  
regardless of who wrote it.  
Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the  
intent is to exercise the right to control the distribution of derivative or collective works based on the Library.  
In addition, mere aggregation of another work not based on the Library with the Library (or with a work based on  
the Library) on a volume of a storage or distribution medium does not bring the other work under the scope of this  
License.  
3.You may opt to apply the terms of the ordinary GNU General Public License instead of this License to a given copy  
of the Library. To do this, you must alter all the notices that refer to this License, so that they refer to the ordinary GNU  
General Public License, version 2, instead of to this License. (If a newer version than version 2 of the ordinary GNU  
General Public License has appeared, then you can specify that version instead if you wish.) Do not make any other  
change in these notices.  
Once this change is made in a given copy, it is irreversible for that copy, so the ordinary GNU General Public License  
applies to all subsequent copies and derivative works made from that copy.  
This option is useful when you wish to copy part of the code of the Library into a program that is not a library.  
4.You may copy and distribute the Library (or a portion or derivative of it, under Section 2) in object code or executable  
form under the terms of Sections 1 and 2 above provided that you accompany it with the complete corresponding  
machine-readable source code, which must be distributed under the terms of Sections 1 and 2 above on a medium  
customarily used for software interchange.  
If distribution of object code is made by offering access to copy from a designated place, then offering equivalent access  
to copy the source code from the same place satisfies the requirement to distribute the source code, even though third  
parties are not compelled to copy the source along with the object code.  
5. A program that contains no derivative of any portion of the Library, but is designed to work with the Library by being  
compiled or linked with it, is called a “work that uses the Library”. Such a work, in isolation, is not a derivative work of  
the Library, and therefore falls outside the scope of this License.  
However, linking a “work that uses the Library” with the Library creates an executable that is a derivative of the Library  
(because it contains portions of the Library), rather than a “work that uses the library”. The executable is therefore  
covered by this License. Section 6 states terms for distribution of such executables.  
When a “work that uses the Library” uses material from a header file that is part of the Library, the object code for the  
work may be a derivative work of the Library even though the source code is not.  
Whether this is true is especially significant if the work can be linked without the Library, or if the work is itself a library.  
The threshold for this to be true is not precisely defined by law.  
If such an object file uses only numerical parameters, data structure layouts and accessors, and small macros and  
small inline functions (ten lines or less in length), then the use of the object file is unrestricted, regardless of whether  
it is legally a derivative work. (Executables containing this object code plus portions of the Library will still fall under  
Section 6.)  
Otherwise, if the work is a derivative of the Library, you may distribute the object code for the work under the terms of  
Section 6. Any executables containing that work also fall under Section 6, whether or not they are linked directly with  
the Library itself.  
6. As an exception to the Sections above, you may also combine or link a “work that uses the Library” with the Library  
to produce a work containing portions of the Library, and distribute that work under terms of your choice, provided  
that the terms permit modification of the work for the customer’s own use and reverse engineering for debugging such  
modifications.  
You must give prominent notice with each copy of the work that the Library is used in it and that the Library and its use  
are covered by this License. You must supply a copy of this License. If the work during execution displays copyright  
notices, you must include the copyright notice for the Library among them, as well as a reference directing the user to  
the copy of this License. Also, you must do one of these things:  
a) Accompany the work with the complete corresponding machine-readable source code for the Library including  
whatever changes were used in the work (which must be distributed under Sections 1 and 2 above); and, if the work  
is an executable linked with the Library, with the complete machine-readable “work that uses the Library”, as object  
code and/or source code, so that the user can modify the Library and then relink to produce a modified executable  
containing the modified Library. (It is understood that the user who changes the contents of definitions files in the  
Library will not necessarily be able to recompile the application to use the modified definitions.)  
b) Use a suitable shared library mechanism for linking with the Library. A suitable mechanism is one that (1) uses at run  
time a copy of the library already present on the user’s computer system, rather than copying library functions into  
the executable, and (2) will operate properly with a modified version of the library, if the user installs one, as long as  
the modified version is interface-compatible with the version that the work was made with.  
c) Accompany the work with a written offer, valid for at least three years, to give the same user the materials specified  
48  
in Subsection 6a, above, for a charge no more than the cost of performing this distribution.  
d) If distribution of the work is made by offering access to copy from a designated place, offer equivalent access to copy  
the above specified materials from the same place.  
e) Verify that the user has already received a copy of these materials or that you have already sent this user a copy.  
For an executable, the required form of the “work that uses the Library” must include any data and utility programs  
needed for reproducing the executable from it. However, as a special exception, the materials to be distributed need  
not include anything that is normally distributed (in either source or binary form) with the major components (compiler,  
kernel, and so on) of the operating system on which the executable runs, unless that component itself accompanies  
the executable.  
It may happen that this requirement contradicts the license restrictions of other proprietary libraries that do not normally  
accompany the operating system. Such a contradiction means you cannot use both them and the Library together in  
an executable that you distribute.  
7. You may place library facilities that are a work based on the Library side-by-side in a single library together with  
other library facilities not covered by this License, and distribute such a combined library, provided that the separate  
distribution of the work based on the Library and of the other library facilities is otherwise permitted, and provided that  
you do these two things:  
a) Accompany the combined library with a copy of the same work based on the Library, uncombined with any other  
library facilities. This must be distributed under the terms of the Sections above.  
b) Give prominent notice with the combined library of the fact that part of it is a work based on the Library, and  
explaining where to find the accompanying uncombined form of the same work.  
8. You may not copy, modify, sublicense, link with, or distribute the Library except as expressly provided under  
this License. Any attempt otherwise to copy, modify, sublicense, link with, or distribute the Library is void, and will  
automatically terminate your rights under this License. However, parties who have received copies, or rights, from you  
under this License will not have their licenses terminated so long as such parties remain in full compliance.  
9.You are not required to accept this License, since you have not signed it. However, nothing else grants you permission  
to modify or distribute the Library or its derivative works. These actions are prohibited by law if you do not accept  
this License. Therefore, by modifying or distributing the Library (or any work based on the Library), you indicate your  
acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying the Library  
or works based on it.  
10. Each time you redistribute the Library (or any work based on the Library), the recipient automatically receives  
a license from the original licensor to copy, distribute, link with or modify the Library subject to these terms and  
conditions.You may not impose any further restrictions on the recipients’ exercise of the rights granted herein.You are  
not responsible for enforcing compliance by third parties with this License.  
11. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited  
to patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the  
conditions of this License, they do not excuse you from the conditions of this License. If you cannot distribute so as to  
satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence  
you may not distribute the Library at all. For example, if a patent license would not permit royalty-free redistribution of  
the Library by all those who receive copies directly or indirectly through you, then the only way you could satisfy both it  
and this License would be to refrain entirely from distribution of the Library.  
If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the  
section is intended to apply, and the section as a whole is intended to apply in other circumstances.  
It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest  
validity of any such claims; this section has the sole purpose of protecting the integrity of the free software distribution  
system which is implemented by public license practices. Many people have made generous contributions to the wide  
range of software distributed through that system in reliance on consistent application of that system; it is up to the  
author/donor to decide if he or she is willing to distribute software through any other system and a licensee cannot  
impose that choice.  
This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License.  
12. If the distribution and/or use of the Library is restricted in certain countries either by patents or by copyrighted  
interfaces, the original copyright holder who places the Library under this License may add an explicit geographical  
distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus  
excluded. In such case, this License incorporates the limitation as if written in the body of this License.  
13. The Free Software Foundation may publish revised and/or new versions of the Lesser General Public License from  
time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new  
problems or concerns.  
Each version is given a distinguishing version number. If the Library specifies a version number of this License which  
applies to it and “any later version”, you have the option of following the terms and conditions either of that version or of  
any later version published by the Free Software Foundation. If the Library does not specify a license version number,  
you may choose any version ever published by the Free Software Foundation.  
14. If you wish to incorporate parts of the Library into other free programs whose distribution conditions are incompatible  
with these, write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation,  
49  
write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two  
goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of  
software generally.  
NO WARRANTY  
15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE LIBRARY,  
TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE  
COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE LIBRARY “AS IS” WITHOUT WARRANTY OF  
ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES  
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY  
AND PERFORMANCE OFTHE LIBRARY IS WITHYOU. SHOULDTHE LIBRARY PROVE DEFECTIVE,YOU ASSUME  
THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.  
16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY  
COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE LIBRARY AS  
PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL  
OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE LIBRARY (INCLUDING  
BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY  
YOU OR THIRD PARTIES OR A FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN  
IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.  
END OF TERMS AND CONDITIONS  
How to Apply These Terms to Your New Libraries  
If you develop a new library, and you want it to be of the greatest possible use to the public, we recommend making it  
free software that everyone can redistribute and change.You can do so by permitting redistribution under these terms  
(or, alternatively, under the terms of the ordinary General Public License).  
To apply these terms, attach the following notices to the library. It is safest to attach them to the start of each source file  
to most effectively convey the exclusion of warranty; and each file should have at least the “copyright” line and a pointer  
to where the full notice is found.  
<one line to give the library’s name and a brief idea of what it does.>  
Copyright (C) <year> <name of author>  
This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General  
Public License as published by the Free Software Foundation; either version 2.1 of the License, or (at your option)  
any later version.  
This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied  
warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public  
License for more details.  
You should have received a copy of the GNU Lesser General Public License along with this library; if not, write to the  
Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA  
Also add information on how to contact you by electronic and paper mail.You should also get your employer (if you work  
as a programmer) or your school, if any, to sign a “copyright disclaimer” for the library, if necessary. Here is a sample;  
alter the names:  
Yoyodyne, Inc., hereby disclaims all copyright interest in the library `Frob’ (a library for tweaking knobs) written by  
James Random Hacker.  
<signature of Ty Coon>, 1 April 1990  
Ty Coon, President of Vice  
That’s all there is to it!  
Appendix M – BSD-New  
/*  
Copyright (c) 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997  
The Regents of the University of California. All rights reserved.  
Redistribution and use in source and binary forms, with or without modification, are permitted provided that: (1) source  
code distributions retain the above copyright notice and this paragraph in its entirety, (2) distributions including binary  
code include the above copyright notice and this paragraph in its entirety in the documentation or other materials  
provided with the distribution, and (3) all advertising materials mentioning features or use of this software display the  
following acknowledgement:  
``This product includes software developed by the University of California, Lawrence Berkeley Laboratory and its  
contributors.’’ Neither the name of the University nor the names of its contributors may be used to endorse or promote  
products derived from this software without specific prior written permission.  
THIS SOFTWARE IS PROVIDED ``AS IS’’ AND WITHOUT ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING,  
WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR  
PURPOSE.  
*/  
50  
Appendix N – CinemaNow  
Third Party Requirements  
a. gSOAP.  
The following notice is applicable to the CinemaNow SDK. Company is required to include such notice in the  
documentation for any Embedded Products it distributes.  
Part of the software embedded in this product is gSOAP software.  
Portions created by gSOAP are Copyright (C) 2001-2004 Robert A. van Engelen, Genivia Inc. All Rights Reserved.  
THE SOFTWARE IN THIS PRODUCT WAS IN PART PROVIDED BY GENIVIA INC AND ANY EXPRESS OR IMPLIED  
WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND  
FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR  
ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,  
BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR  
PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER  
IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY  
OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.  
b. [THE CODE IS BEING PROVIDED IN OBJECT CODE SO THE ABOVE DOESN’T APPLY]  
c. Curl/ 7.12.2  
COPYRIGHT AND PERMISSION NOTICE  
Copyright (c) 1996 - 2009, Daniel Stenberg, <[email protected]>.  
All rights reserved.  
Permission to use, copy, modify, and distribute this software for any purpose with or without fee is hereby granted,  
provided that the above copyright notice and this permission notice appear in all copies.  
THE SOFTWARE IS PROVIDED “AS IS”, WITHOUTWARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING  
BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND  
NONINFRINGEMENT OFTHIRD PARTY RIGHTS.IN NO EVENT SHALLTHE AUTHORS OR COPYRIGHT HOLDERS  
BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT  
OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER  
DEALINGS IN THE SOFTWARE.  
Except as contained in this notice, the name of a copyright holder shall not be used in advertising or otherwise to  
promote the sale, use or other dealings in this Software without prior written authorization of the copyright holder.  
d. C-ARES 1.6.0  
Copyright 1998 by the Massachusetts Institute of Technology.  
Permission to use, copy, modify, and distribute this software and its documentation for any purpose and without fee is  
hereby granted, provided that the above copyright notice appear in all copies and that both that copyright notice and this  
permission notice appear in supporting documentation, and that the name of M.I.T.not be used in advertising or publicity  
pertaining to distribution of the software without specific, written prior permission. M.I.T. makes no representations  
about the suitability of this software for any purpose. It is provided “as is” without express or implied warranty.  
e. Openssl 0.9.5a  
Original SSLeay License  
----------------------------  
Copyright (C) 1995-1998 Eric Young ([email protected]) All rights reserved.  
This package is an SSL implementation written by EricYoung ([email protected]).The implementation was written so  
as to conform with Netscapes SSL.This library is free for commercial and non-commercial use as long as the following  
conditions are adhered to. The following conditions apply to all code found in this distribution, be it the RC4, RSA, lhash,  
DES, etc., code; not just the SSL code. The SSL documentation included with this distribution is covered by the same  
copyright terms except that the holder is Tim Hudson ([email protected]).  
Copyright remains EricYoung’s, and as such any Copyright notices in the code are not to be removed. If this package is  
used in a product, EricYoung should be given attribution as the author of the parts of the library used.This can be in the  
form of a textual message at program startup or in documentation (online or textual) provided with the package.  
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following  
conditions are met:  
1. Redistributions of source code must retain the copyright notice, this list of conditions and the following disclaimer.  
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following  
disclaimer in the documentation and/or other materials provided with the distribution.  
3. All advertising materials mentioning features or use of this software must display the following acknowledgement:  
“This product includes cryptographic software written by EricYoung ([email protected])”.The word ‘cryptographiccan  
be left out if the routines from the library being used are not cryptographic related :-).  
4. If you include any Windows specific code (or a derivative thereof) from the apps directory (application code) you must  
51  
include an acknowledgement: “This product includes software written by Tim Hudson ([email protected])”  
THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS’’ AND ANY EXPRESS OR IMPLIED WARRANTIES,  
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR  
A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE  
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES  
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,  
DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,  
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN  
ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.  
The license and distribution terms for any publicly available version or derivative of this code cannot be changed. i.e. this  
code cannot simply be copied and put under another distribution license [including the GNU Public License.]  
Content owners use Windows Media digital rights management technology (WMDRM) to protect their intellectual  
property, including copyrights.This device uses WMDRM software to access WMDRM-protected content. If the WMDRM  
software fails to protect the content, content owners may ask Microsoft to revoke the software’s ability to use WMDRM  
to play or copy protected content. Revocation does not affect unprotected content. When you download licenses for  
protected content, you agree that Microsoft may include a revocation list with the licenses. Content owners may require  
you to upgrade WMDRM to access their content. If you decline an upgrade, you will not be able to access content that  
requires the upgrade.  
Printed in China  
811-215091W011  

Vista Davis &amp; Sanford DPJR18 User Manual
Tektronix Car Amplifier 5B10N User Manual
Sungale AD1020 User Manual
Sony XR C850RW User Manual
Sony Stereo System ST JX285 User Manual
Sony DVCAM DSR 400PL User Manual
Sony DSR 500WSL User Manual
Sony BDP S770 User Manual
Sharp Scientific Calculator EL506XBWH User Manual
Samsung SyncMaster 225MS User Manual