pause or
SD, MS, MMC, XD cards are compatible with this unit.
1. Insert the memory card according to the indication of icon beside the slot.
2. Misaligning may cause artificial damage. This may nullify the warranty.
Pull the card straightly out of the unit and avoid bending the card.
Note: When rotating a photo in thumbnail mode:
1. The Rotate icon will be changed into the Reset icon automatically, press
the Reset icon to reset the photos.
2. The Slide Show icon will be changed into the Return icon, press the
Return icon to return to previous mode.
Press Exit button to return to the previous menu.
1. During movie playing back, press EXIT button to enter the movie file list.
2. Use the navigation button to select desired folder and desired movie file.
3. Press the ENTER button to play.
Press Exit button to return to the previous menu.
Use the soft-keyboard to name the new folder.
Paste files
Select the Exit icon and press Enter button to return to the main menu.
Attn: The alarm works only when the digital photo frame is powered on.
Note: The ASSP is a software in the internal memory developed by Sungale go
manage the picture and audio files to optimize the utilization of the source
of the memory.
The ASSP is inapplicable to manage ebook and video files. Just use the unit
as a regular storage device to manage ebook and video files after connecting
the unit to the PC.
an
How can I see the file list?
to get ebooks. Make sure download ebooks in TXT format.
Where to get ebooks?
How to convert PDF or HTML
into TXT files?
convert PDF or HTML into TXT files.
The ASSP is a sofware in the internal memory to manage the picture
and audio files to optimize the utilization of the source of the memory.
It is inapplicable to manage ebook and video files.
What is the ASSP software?
How to put the ebook or video
files into the memory?
Just use the unit as a regular storage device, copy and paste the files
from the PC to the internal memory.
1. Check if the power button is on.
2. Check if the power outlet is operational.
3. Check if the power cord is damaged.
4. Check if the power plug is connected to photo frame properly.
1. Check if the cord is damaged.
2. Check if the card is connected the photo frame correctly.
3. Pull out the card, and then insert again.
1. Check if the battery is properly installed.
2. Check if the battery “protective plastic” is pulled out.
|