Sony Sbh20 Headset Stereo 12708070 User Manual

User guide  
Stereo Bluetooth Headset  
SBH20  
Introduction  
With the Stereo Bluetooth™ Headset SBH20 you can control incoming and outgoing  
phone calls while you listen to music in stereo from your phone or from another  
device. Such a device must support Bluetooth™, for example, a computer or a  
portable music player. During a call, the music pauses automatically and starts  
playing again when the call ends.  
3
This is an Internet version of this publication. © Print only for private use.  
Accessory overview  
1. Volume controls  
Adjust the volume.  
2. NFC detection area Swipe this area during NFC transactions.  
3. Clip  
Attach the accessory to your clothing.  
Insert the charger cable to charge the battery.  
Play the next track.  
4. Micro USB port  
5. Next key  
6. Music key/Call key Play/Pause the current media file.  
Answer incoming calls.  
Press and hold down to reject incoming calls.  
Play the previous track.  
7. Previous key  
8. Power switch  
9. Notification light  
Move the switch to turn the power on or off.  
Red light: battery level below 10%  
Green light: battery level above 90%  
Flashing orange light: battery level 10% - 90%.  
Flashing blue light indicates headset is visible to other  
Bluetooth™ devices.  
Flashing purple light indicates an incoming call.  
3.5 mm input for wired headphones.  
Place within range of your voice.  
10. Headset jack  
11. Microphone  
Compatibility information for your accessory are available at www.sonymobile.com/support.  
4
This is an Internet version of this publication. © Print only for private use.  
Basics  
Charging the battery  
Before using the Stereo Bluetooth™ Headset SBH20 for the first time, you need to  
charge the headset for approximately 2.5 hours. Sony chargers are recommended.  
To charge the battery  
1
2
Plug the charger into a power outlet.  
Plug one end of the USB cable into the charger (or into the USB port of a  
computer).  
Plug the other end of the cable into the Micro USB port on your Stereo  
Bluetooth™ Headset SBH20 device.  
3
Notification light will display the charging status after you turn off the headset.  
Turning on the headset  
To turn on the headset  
Move the switch upwards.  
Pairing the headset with your phone  
You can pair the headset with your phone manually or using NFC. After successful  
pairing, the headset connects automatically to the phone as soon as the headset is  
turned on and within range.  
5
This is an Internet version of this publication. © Print only for private use.  
To manually pair the headset with your phone  
1
2
3
4
Make sure your phone has the Bluetooth™ function turned on.  
Turn on the headset.  
Headset: Press and hold until the notification light flashes blue.  
Phone: Scan for Bluetooth™ devices, then select Stereo Bluetooth™ Headset  
SBH20 in the available devices list.  
Follow the pairing instructions that appear on your phone. If a passcode is  
required, enter 0000.  
5
To pair the headset with your phone using NFC  
1
Make sure that your phone has the NFC function turned on and that the phone  
screen is active.  
2
3
Turn on the headset.  
Place your phone over the headset so that the NFC detection area of each  
device touches the other.  
Follow the pairing instructions that appear on your phone. If a passcode is  
required, enter 0000.  
4
Adjusting the volume  
To change the call or music volume  
During a call, or when listening to music, press the Volume control key  
up or down.  
Resetting the headset  
Reset the headset if it behaves unexpectedly. Resetting the headset removes all  
information about paired devices.  
To reset the headset  
Turn off the headset, then turn on the headset again to perform a restart.  
6
This is an Internet version of this publication. © Print only for private use.  
Wearing instruction  
You can rotate the clip left or right for a more comfortable fit.  
To get the best performance from a Bluetooth™ headset when using it outdoors, it is  
recommended that you carry your phone on the same side of your body as the  
headset unit.  
7
This is an Internet version of this publication. © Print only for private use.  
Call handling  
To answer a call with the headset  
When you hear an incoming call signal, press  
.
To end a call  
During an ongoing call, press  
.
To reject a call  
When you hear an incoming call signal, press and hold down  
.
To mute the microphone during a call  
Press and hold down  
.
To answer a second call  
When you hear an incoming call signal during an ongoing call, press . The  
ongoing call is put on hold.  
To reject a second call  
When you hear an incoming call signal during an ongoing call, press and hold  
down  
.
To switch between two calls  
Press or  
.
8
This is an Internet version of this publication. © Print only for private use.  
Listening to music  
To listen to music  
1
2
Open the media player in your phone.  
Press to play the music on the headset. To pause the music, press again.  
To move between tracks  
When you listen to music, press  
or  
.
To move within a track  
Press and hold down  
or  
until you reach the desired position.  
9
This is an Internet version of this publication. © Print only for private use.  
Multipoint technology  
Use Multipoint technology to connect your headset to two Bluetooth™ devices at the  
same time. For example, if you connect your headset with two phones, you can  
receive calls from both phones without having to disconnect and reconnect.  
If you prefer that your headset connects to just one Bluetooth™ device at any given  
time, you can use Singlepoint mode instead. Before pairing your headset with a new  
device in Singlepoint mode, make sure that you disconnect it from other devices.  
Multipoint mode consumes more battery power than Singlepoint mode.  
To switch between Multipoint mode and Singlepoint mode  
1
2
3
Make sure that the headset is turned off.  
Put the headphones in your ears.  
To enter Multipoint mode, press and hold down the volume up key while  
turning on the headset. After Multipoint mode is activated, you will hear two  
beeps.  
To enter Singlepoint mode, press and hold down the volume down key while  
turning on the headset. After Singlepoint mode is activated, you will hear one  
beep.  
4
In order to connect to both paired devices in Multipoint mode, you need to restart the  
headset.  
10  
This is an Internet version of this publication. © Print only for private use.  
Troubleshooting  
I cannot answer a second call  
Make sure your phone supports the Bluetooth handsfree profile.  
Make sure the correct calling device is selected.  
Music does not play in the headset  
Make sure your phone or other device is paired with the headset. You may have to  
restart the media player and select to use the headset.  
Make sure the correct music source is selected.  
The headset turns off automatically  
The battery level is too low. The headset beeps approximately 10 minutes before it  
turns off. Charge the battery.  
Unexpected behaviour  
Restart the headset.  
No connection to the phone  
Make sure the headset is charged and within range of the phone. A maximum  
distance of 10 metres (33 feet), with no solid objects in between, is recommended.  
Check the Bluetooth settings in the phone, and reset if necessary. Pair the headset  
with the phone again.  
11  
This is an Internet version of this publication. © Print only for private use.  
Legal information  
Sony SBH20  
Prior to use, please read the Important information leaflet separately provided.  
This User guide is published by Sony Mobile Communications AB or its local affiliated company, without any  
warranty. Improvements and changes to this User guide necessitated by typographical errors, inaccuracies of  
current information, or improvements to programs and/or equipment, may be made by Sony Mobile  
Communications AB at any time and without notice. Such changes will, however, be incorporated into new  
editions of this User guide.  
All rights reserved.  
©Sony Mobile Communications AB, 2012  
Publication number: 1271-8369.3  
Interoperability and compatibility among Bluetooth™ devices varies. Device generally supports products  
utilizing Bluetooth spec. 1.2 or higher, and Headset or Handsfree profile.  
Sony is the trademark or registered trademark of Sony Corporation. Bluetooth is the trademark of the  
Bluetooth (SIG) Inc. and is used under license. All other marks are the property of their respective owners. All  
rights reserved.  
All product and company names mentioned herein are the trademarks or registered trademarks of their  
respective owners. Any rights not expressly granted herein are reserved. All other trademarks are property of  
their respective owners.  
Visit www.sonymobile.com for more information.  
All illustrations are for illustration only and may not accurately depict the actual accessory.  
12  
This is an Internet version of this publication. © Print only for private use.  
Declaration of Conformity for SBH20  
We, Sony Mobile Communications AB of  
Nya Vattentornet  
SE-221 88 Lund, Sweden  
declare under our sole responsibility that our product  
Sony type RD-0010  
and in combination with our accessories, to which this declaration relates is in  
conformity with the appropriate standards EN 300 328:V1.7.1, EN 301 489-7:V1.3.1,  
EN 301 489-17:V2.1.1 and EN 60 950-1:2006 +A11:2009+A1:2010+A12:2011  
following the provisions of, Radio Equipment and Telecommunication Terminal  
Equipment directive 1999/5/EC.  
Lund, December 2012  
Pär Thuresson,  
Quality Officer, VP, Quality & Customer Services  
We fulfil the requirements of the R&TTE Directive (1999/5/EC).  
FCC Statement  
This device complies with Part 15 of the FCC rules. Operation is subject to the following two  
conditions: (1) This device may not cause harmful interference, and (2) This device must  
accept any interference received, including interference that may cause undesired operation.  
Any change or modification not expressly approved by Sony may void the user's authority to operate the  
equipment.  
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to  
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful  
interference in a residential installation. This equipment generates, uses and can radiate radio frequency  
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to  
radio communications. However, there is no guarantee that interference will not occur in a particular  
installation.  
If this equipment does cause harmful interference to radio or television reception, which can be determined by  
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of  
the following measures:  
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and receiver.  
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  
Consult the dealer or an experienced radio/TV technician for help.  
Industry Canada Statement  
This device complies with RSS-210 of Industry Canada.  
Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this  
device must accept any interference, including interference that may cause undesired operation of the device.  
This Class B digital apparatus complies with Canadian ICES-003.  
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.  
Avis d’industrie Canada  
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de  
licence.  
L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et,  
and (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est  
susceptible d'en compromettre le fonctionnement.  
13  
This is an Internet version of this publication. © Print only for private use.  

ToCAD Carbon Fiber Monopod SunpakPRO 724M User Manual
Tiffen 46DIGEFK User Manual
Sony EL S25 User Manual
Sony DSCH90S User Manual
Sony CDX 605 User Manual
Sony CCD TRV22 User Manual
Sony CCD TR57 User Manual
Samsung VP D340 User Manual
Samsung D307 User Manual
Samsung Blu Ray Disc Player BDC5500 User Manual