2-887-519-11(1)
© 2006 Sony Corporation
For your protection, please read these safety
instructions completely before operating
the appliance, and keep this manual for
future reference.
Clea
Unplug the set from the wall outlet before
cleaning or polishing it. Do not use liquid cleaners
or aerosol cleaners. Use a cloth lightly dampened
with water for cleaning the exterior of the set.
n
i
n
Carefully observe all warnings, precautions
and instructions on the appliance, or the one
described in the operating instructions and
Insttion
adhere to them.
alla
WadM
teranoisture
U
se
Do not use power-line operated sets near water –
for example, near a bathtub, washbowl, kitchen
PowerSources
sink, or laundry tub, in a wet basement, or near a
swimming pool, etc.
This set should be operated only from the type of
power source indicated on the marking label. If
you are not sure of the type of electrical power
supplied to your home, consult your dealer or
local power company. For those sets designed to
operate from battery power, or other sources, refer
to the operating instructions.
Power-CordProtection
Route the power cord so that it is not likely to be
walked on or pinched by items placed upon or
against them, paying particular attention to the
plugs, receptacles, and the point where the cord
exits from the appliance.
Polarization
Accessories
This set may be equipped with a polarized ac
power cord plug (a plug having one blade wider
than the other).
Do not place the set on an unstable cart, stand,
tripod, bracket, or table. The set may fall, causing
serious injury to a child or an adult, and serious
damage to the set. Use only a cart, stand, tripod,
bracket, or table recommended by the
manufacturer.
This plug will fit into the power outlet only one
way. This is a safety feature. If you are unable to
insert the plug fully into the outlet, try reversing
the plug. If the plug should still fail to fit, contact
your electrician to have a suitable outlet installed.
Do not defeat the safety purpose of the polarized
Ventilation
plug by forcing it in.
The slots and openings in the cabinet are provided
for necessary ventilation. To ensure reliable
Overloadin
operation of the set, and to protect it from
overheating, these slots and openings must never
be blocked or covered.
Do not overload wall outlets, extension cords or
convenience receptacles beyond their capacity,
since this can result in fire or electric shock.
– Never cover the slots and openings with a cloth
or other materials.
O
bjectandLiquidEntry
– Never block the slots and openings by placing
the set on a bed, sofa, rug, or other similar
surface.
Never push objects of any kind into the set
through openings as they may touch dangerous
voltage points or short out parts that could result
in a fire or electric shock. Never spill liquid of any
kind on the set.
– Never place the set in a confined space, such as
a bookcase, or built-in cabinet, unless proper
ventilation is provided.
– Do not place the set near or over a radiator or
heat register, or where it is exposed to direct
Attacments
sunlight.
Do not use attachments not recommended by the
manufacturer, as they may cause hazards.
Continued ,
3
LitninSafetyCeck
For added protection for this set during a lightning
storm, or when it is left unattended and unused for
long periods of time, unplug it from the wall
outlet and disconnect the antenna or cable system.
This will prevent damage to the set due to
lightning and power-line surges.
Upon completion of any service or repairs to the
set, ask the service technician to perform routine
safety checks (as specified by the manufacturer)
to determine that the set is in safe operating
condition.
Service
DamaeRequSece
irinrvi
Unplug the set from the wall outlet and refer
servicing to qualified service personnel under the
following conditions:
– When the power cord or plug is damaged or
frayed.
– If liquid has been spilled or objects have fallen
into the set.
– If the set has been exposed to rain or water.
– If the set has been subject to excessive shock by
being dropped, or the cabinet has been
damaged.
– If the set does not operate normally when
following the operating instructions. Adjust
only those controls that are specified in the
operating instructions. Improper adjustment of
other controls may result in damage and will
often require extensive work by a qualified
technician to restore the set to normal operation.
– When the set exhibits a distinct change in
performance – this indicates a need for service.
Servicin
Do not attempt to service the set yourself as
opening or removing covers may expose you to
dangerous voltage or other hazards.
Refer all servicing to qualified service personnel.
Replacementparts
When replacement parts are required, be sure the
service technician has used replacement parts
specified by the manufacturer that have the same
characteristics as the original parts.
Unauthorized substitutions may result in fire,
electric shock, or other hazards.
4
ReulatoryInformation
Enlis
Declaration of Conformity
Trade Name: SONY
Model No.: HVR-V1U
Before operating the unit, please read this
manual thoroughly, and retain it for future
reference.
Responsible Party: Sony Electronics Inc.
CAUTION
Address: 16530 Via Esprillo, San Diego, CA
92127 U.S.A.
Replace the battery with the
specified type only. Otherwise, fire
or injury may result.
Telephone Number: 858-942-2230
This device complies with Part 15 of the FCC
Rules.
Operation is subject to the following two
conditions:
ForcustomersinteU.S.A.and
(1) This device may not cause harmful
interference, and (2) this device must accept any
CANADA
interference received, including interference
that may cause undesired operation.
HVR-V1Uonly
RECYCLINGLITHIUM-IONBATTERIES
CAIN
U
T
O
Lithium-Ion batteries are
You are cautioned that any changes or
modifications not expressly approved in this
manual could void your authority to operate this
equipment.
recyclable. You can help preserve
our environment by returning
your used rechargeable batteries
to the collection and recycling
location nearest you.
For more information regarding recycling of
rechargeable batteries, call toll free 1-800-822-
8837, or visit http://www.rbrc.org/
Note
This equipment has been tested and found to
comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference in a
residential installation. This equipment generates,
uses, and can radiate radio frequency energy and,
if not installed and used in accordance with the
instructions, may cause harmful interference to
radio communications.
However, there is no guarantee that interference
will not occur in a particular installation. If this
equipment does cause harmful interference to
radio or television reception, which can be
determined by turning the equipment off and on,
the user is encouraged to try to correct the
interference by one or more of the following
measures:
Caution: Do not handle damaged or leaking
Lithium-Ion batteries.
O
wner'sRecord
The model and serial numbers are located on the
bottom. Record the serial number in the space
provided below. Refer to these numbers whenever
you call upon your Sony dealer regarding this
product.
Model No. HVR-
Serial No.
Model No. AC-
No.
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment
and receiver.
– Connect the equipment into an outlet on a
ForcustomersinteU.S.A.
circuit different from that to which the receiver
is connected.
– Consult the dealer or an experienced radio/TV
technician for help.
If you have any questions about this
product, you may call:
Sony Customer Information Center 1-800-
686-SONY (7669).
The number below is for the FCC related
matters only.
The supplied interface cable must be used with the
equipment in order to comply with the limits for a
digital device pursuant to Subpart B of Part 15 of
FCC Rules.
Continued ,
5
ForteStateofCalifornia,USAonly
Perchlorate Material - special handling may
apply, See
www.dtsc.ca.gov/hazardouswaste/perchlorate
Perchlorate Material: Lithium battery contains
perchlorate.
Tofcassetteyoucanuseinyour
ypes
camcde
o
r
r
Your camcorder is capable of recording in
HDV, DVCAM and DV formats.
When recording in HDV/DV format, it is
recommended to use mini DV cassettes.
When recording in DVCAM format, it is
recommended to use mini DVCAM
cassettes.
Mini DV cassettes with Cassette Memory
TeHDVstandards
• Digital high-definition (HD) video signals
are recorded and played back on a DV
format cassette.
• HDV signals are compressed in MPEG2
format, which is adopted in BS (broadcast
satellite) digital and terrestrial digital
HDTV broadcastings and in Blu-ray disc
recorders.
T
i
ypes
nyourcamcorder
of“MemoryStick”youcanuse
There are two sizes of “Memory Stick.”
You can use “Memory Stick Duo” marked
with
or
“Memory Stick Duo”
(This size can be used with your
camcorder.)
6
“Memory Stick”
(You cannot use it in your camcorder.)
b Notes
• You cannot use any type of memory card except
“Memory Stick Duo.”
• “Memory Stick PRO” and “Memory Stick PRO
Duo” can be used only with “Memory Stick
PRO” compatible equipment.
b Notes
• The camcorder is not dustproof, dripproof or
waterproof.
• Before connecting your camcorder to another
device with an HDMI cable, component video
cable, USB or i.LINK cable, be sure to insert the
connector plug the correct way, and not forcibly
• Do not attach a label or the like on a “Memory
Stick Duo” or a Memory Stick Duo Adaptor.
We
n
us
i
n
a
“
Mem
o
r
yS
t
i
c
k
Du
o
”
to avoid damaging the terminal, or cause a
malfunction of your camcorder.
wit“oryStick”cotible
Mem
mpa
Abmeems,CDpael,
ewfde,adle
equpme
i
n
t
o
uu
t
n
i
t
L
n
Be sure to insert the “Memory Stick Duo”
into the Memory Stick Duo Adaptor.
viinrnns
• A menu item that is grayed out is not
available under the current recording or
playback conditions.
Memory Stick Duo Adaptor
• The LCD screen and the viewfinder are
manufactured using extremely high-
precision technology, so over 99.99% of
the pixels are operational for effective
use. However, there may be some tiny
black points and/or bright points (white,
red, blue, or green in color) that appear
constantly on the LCD screen and the
viewfinder. These points are normal
results of the manufacturing process and
do not affect the recording in any way.
U
sintecamcorder
• Do not hold the camcorder by the
following part.
7
• Exposing the LCD screen, the viewfinder,
or the lens to direct sunlight for long
periods of time may cause malfunctions.
This function that can be used when
USB cable is connected.
• Do not aim at the sun. Doing so might
cause your camcorder to malfunction.
Take pictures of the sun only in low light
conditions, such as at dusk.
Abouttismanual
• The images of the LCD screen and the
viewfinder used in this manual for
illustration purposes are captured using a
digital still camera, and therefore may
Onrecordin
appear different.
• Before starting to record, test the
recording function to make sure the
picture and sound are recorded without
any problems.
• Compensation for the contents of
recordings cannot be provided, even if
recording or playback is not possible due
to a malfunction of the camcorder, storage
media, etc.
• The on-screen displays in each local
language are used for illustrating the
operating procedures. Change the screen
language before using your camcorder if
• Design and specifications of recording
media and other accessories are subject to
change without notice.
• TV color systems differ depending on the
countries/regions. To view your
recordings on a TV, you need an NTSC
system-based TV.
• Television programs, films, video tapes,
and other materials may be copyrighted.
Unauthorized recording of such materials
may be contrary to the copyright laws.
AboutteCarlZeisslens
Your camcorder is equipped with a Carl
Zeiss lens, which was developed jointly by
Carl Zeiss, in Germany, and Sony
Corporation, and produces superior images.
It adopts the MTF measurement system for
video cameras and offers a quality typical
of a Carl Zeiss lens. Also, the lens for your
camcorder is T -coated to suppress
OnplayinbackHDVtapesonoter
unwanted reflections and faithfully
devices
reproduce colors.
MTF= Modulation Transfer Function. The
number value indicates the amount of light
from a subject coming into the lens.
A tape recorded in the HDV format cannot
be played back on a device that is not
compatible with the HDV format.
Check the contents of tapes by playing
them back on this camcorder prior to
playing them back on other devices.
Notes on the icons used in this
manual
Features available for the HDV
format only.
Features available for the DVCAM
format only.
Features available for the DV SP
format only.
This function that can be used when
i.LINK cable is connected.
8
Read this first ...........................................................................................5
Step 2: Attaching the supplied microphone and the lens hood with
Adjusting the volume .......................................................................... 42
Continued ,
9
Menu items ............................................................................................ 59
IRIS/STEADYSHOT/BACK LIGHT, etc.)
1
0
Getting Started
Large eyecup(1) (p. 21)
Make sure that you have following items
supplied with your camcorder.
The number in the parentheses indicates the
number of that item supplied.
• The cassette tape and “Memory Stick Duo” are
compatible cassettes and “Memory Stick Duo”
for your camcorder.
Rechargeable battery pack NP-F570 (1)
Lens hood with lens cover (1) (p. 15)
Wind Screen (1) (p. 14)
Microphone (1) (p. 14)
Wireless Remote Commander (1)
CD-ROM “Manuals for Digital HD Video
A button-type lithium battery is already installed.
Operating Guide (This manual) (1)
Component video cable (1) (p. 52)
1
3
4
Connect the plug of the
microphone to the INPUT1 jack
5.
5
6
Put the microphone cable into the
cable holder 4.
1
2
Attach the wind screen 1 to the
microphone 2.
Loosen the screw of the
microphone holder 3 and open
the cover.
3
Place the microphone into the
holder with the model name
facing upward, close the cover,
and tighten the screw.
1
4
ToontesutterofteLensood
pe
Attacinlensoodwitlens
w
itlenscover
cover
Move the lens cover lever up and down to
open or close the lens cover.
2
1
Move the lens cover lever to OPEN
to open the lens cover, and move
the lever to CLOSE to close the lens
cover.
Lens hood fixing screw
Align the marks on the lens hood to
those on the camcorder, and turn the
lens hood in the direction of the
arrow. Tighten the lens hood fixing
screw.
ToroveteLensoodwitlens
em
c
over
Loosen the lens hood fixing screw and turn
the lens hood in the opposite direction of
the arrow in the illustration above.
z Tip
• If you attach, remove or adjust an 62mm (2 1/
2in.) PL filter or MC protector, remove the lens
hood.
1
5
You can charge the battery by
2
With the B mark on the DC plug
facing the cassette compartment,
connect the AC Adaptor to the DC
IN jack on your camcorder.
attaching the “InfoLITHIUM” battery
pack (L series) to your camcorder.
b Note
• You cannot use batteries other than the
“InfoLITHIUM” battery pack (L series)
3
4
5
Connect the power cord to the AC
Adaptor.
DC plug
DC IN jack
Connect the power cord to the
wall outlet.
To the wall
outlet
AC Adaptor
Power cord
Set the POWER switch to OFF
(CHG).
1
Press the battery pack and slide it
down.
The CHARGE lamp lights up and
charging starts.
1
6
AftercarintebatteryRecordintime
The CHARGE lamp turns off when the
battery is fully charged. Disconnect the AC
Adaptor from the DC IN jack.
Approximate time (min.) available when
you use a fully charged battery pack.
Recording in the HDV format
z Tip
ContinuousTypil
ca
ackrec
meme
Ba
tterypordingrecording
• You can check the remaining battery with
titi*
NP-F570
(supplied)
135
135
135
280
290
280
415
430
415
80
80
80
T
o
r
em
o
ve
t
eba
t
t
e
r
ypac
k
Slide the POWER switch to OFF (CHG).
Push the BATT RELEASE (battery release)
button and remove the battery pack.
NP-F770
165
170
165
235
240
235
NP-F970
Recording in the DVCAM (DV) format
C
t
o
n
t
i
n
d
u
i
o
u
s
T
y
p
i
ca
l
Ba
t
t
er
y
p
ackrec
o
r
n
g
rec
o
r
d
i
n
g
i
me
t
i
me
*
NP-F570
(supplied)
135
140
135
290
290
290
430
85
90
85
BATT RELEASE
(battery release) button
Ca
r
i
n
t
i
me
NP-F770
175
175
175
255
Approximate time (min.) required when
you fully charge a fully discharged battery
pack.
NP-F970
Ba
t
t
er
y
p
ackC
h
ar
g
i
n
g
t
i
me
435
430
260
255
NP-F570 (supplied)
NP-F770
260
370
485
NP-F970
Top:
When the LCD backlight turns on.
Middle: When the LCD backlight turns off.
Bottom: Recording time when recording with
the viewfinder while the LCD panel is
closed.
* Typical recording time shows the time when
you repeat recording start/stop, turning the
power on/off and zooming.
b Note
• You cannot use the NP-F330 battery pack with
this camcorder.
Continued ,
1
7
On the charging/recording/playback time
P
layintime
• Times measured with the camcorder at 25 °C
(77 °F) (10 to 30 °C (50 °F to 86 °F)) is
recommended).
Approximate time (min.) available when
you use a fully charged battery pack.
• The recording and playback time will be shorter
when you use your camcorder in low
LCDpanelLCDpanel
temperatures.
HDV format pictures
Batterypack
opened*closed
• The recording and playback time will be shorter
depending on the conditions under which you
use your camcorder.
NP-F570
(supplied)
200
200
NP-F770
NP-F970
410
620
410
620
U
s
i
n
a
n
o
u
t
s
i
dep
o
we
r
s
o
u
r
ce
You can use the AC Adaptor to obtain AC.
While you are using the AC Adaptor, the
battery pack will not lose its charge even
DVCAM (DV) format pictures
LCDpanelLCDpanel
Ba
t
t
er
y
p
ack
when it is attached to your camcorder.
opened*closed
NP-F570
210
210
(supplied)
Connect your camcorder as shown
in Step3:Charging the battery pack
NP-F770
NP-F970
435
660
435
660
* When the LCD backlight turns on.
On the battery pack
• Before changing the battery pack, slide the
POWER switch to OFF (CHG).
• The CHARGE lamp flashes during charging, or
displayed under the following conditions.
– The battery pack is not attached correctly.
– The battery pack is damaged.
On the AC Adaptor
• Use the nearby wall outlet when using the AC
Adaptor. Disconnect the AC Adaptor from the
wall outlet immediately if any malfunction
occurs while using your camcorder.
• Do not use the AC Adaptor placed in a narrow
space, such as between a wall and furniture.
• Do not short-circuit the DC plug of the AC
Adaptor or battery terminal with any metallic
objects. This may cause a malfunction.
– The battery pack is worn-out (For Battery
Info only).
• The power will not be supplied from the battery
as long as the AC Adaptor is connected to the
DC IN jack of your camcorder, even when the
power cord is disconnected from the wall outlet.
PRECAUTION
• Even if your camcorder is turned off, AC power
(house current) is still supplied to it while
• When attaching an optional video light, it is
recommended that you use a NP-F970 battery
pack.
connected to the wall outlet via the AC Adaptor.
1
8
To record or play back, slide the POWER
switch to the respective direction.
When using it for the first time, [CLOCK
2
3
Hold the camcorder properly.
POWER switch
Ensure a good grip, then fasten
the grip belt.
1
While pressing the green button,
set the POWER switch.
If the POWER
switch is set to OFF
(CHG), slide it
while pressing the
green button.
CAMERA: To record pictures.
VCR: To play or edit pictures.
b Note
• After you have set the date and time ([CLOCK
power of your camcorder, the current date and
time will be displayed on the LCD screen for a
few seconds.
Toturnofftepower
Slide the POWER switch to OFF (CHG).
b Note
• If warning messages appear on the screen,
1
9
If th
ToturnoteLCDbacklittomake
ff
TeLCDpanel
tebatterylastloner
Press and hold the DISPLAY/BATT INFO
button for a few seconds until appears.
This setting is practical when you use your
camcorder in bright conditions or where
you want to save battery power. The
recorded picture will not be affected by the
setting. To turn on the LCD backlight, press
and hold the DISPLAY/BATT INFO
button for a few seconds until
Open the LCD panel while pressing the
OPEN button 90 degrees to the camcorder
(1), then rotate it to the best angle to
record or play (2).
disappears.
z Tip
brightness of the LCD screen.
You can view pictures using the viewfinder
to save the battery, or when the picture on
the LCD screen is not clear.
z Tips
• If you rotate the LCD panel 180 degrees toward
the lens from the position 1, you can close the
LCD panel with the LCD screen facing outward.
This is convenient during playback operations.
• To close the LCD panel with the LCD screen
inward, rotate the LCD panel to the position 1,
and then close the LCD panel.
z Tips
• You can adjust the brightness of the viewfinder
• To display images both on the LCD display and
in the viewfinder, set [VF POWERMODE] to
• To display images in black and white in the
2
0
We
ntepictureinteviewfinderis
ardto
see
If you cannot see the picture in the
viewfinder clearly under bright
circumstances, use the supplied large
eyecup. To attach the large eyecup, stretch
it slightly and align it with the eyecup
groove in the viewfinder. You can attach
the large eyecup facing either the right or
left side.
b Note
• Do not remove the pre-attached eyecup.
Large eyecup (supplied)
Attach with
the protruding
part at the top.
2
1
|
