Sony HANDYCAM DVD608 User Manual

2-319-496-11(1)  
Enjoying with your  
camcorder  
Digital Video Camera Recorder  
Operating Guide  
DCR-DVD108/DVD308/  
DVD608/DVD708  
Customizing your  
camcorder  
Additional  
Information  
Quick  
Reference  
Spanish Quick Guide/  
Guía rápida en español  
Additional information on this product and answers  
to frequently asked questions can be found at our  
Customer Support Website.  
http://www.sony.net/  
Printed on 70% or more recycled paper  
using VOC (Volatile Organic Compound)  
-free vegetable oil based ink.  
Printed in China  
© 2007 Sony Corporation  
WARNING  
To reduce fire or shock hazard, do  
not expose the unit to rain or  
moisture.  
This symbol is intended to alert  
the user to the presence of  
uninsulated “dangerous  
voltage” within the product’s  
enclosure that may be of  
sufficient magnitude to  
constitute a risk of electric  
shock to persons.  
This symbol is intended to alert  
the user to the presence of  
important operating and  
maintenance (servicing)  
instructions in the literature  
accompanying the appliance.  
2
IMPORTANT SAFEGUARDS  
For your protection, please read these safety  
instructions completely before operating  
the appliance, and keep this manual for  
future reference.  
Carefully observe all warnings, precautions  
and instructions on the appliance, or the one  
described in the operating instructions and  
adhere to them.  
Cleaning  
Unplug the set from the wall outlet before  
cleaning or polishing it. Do not use liquid cleaners  
or aerosol cleaners. Use a cloth lightly dampened  
with water for cleaning the exterior of the set.  
Installation  
Water and Moisture  
Use  
Do not use power-line operated sets near water –  
for example, near a bathtub, washbowl, kitchen  
sink, or laundry tub, in a wet basement, or near a  
swimming pool, etc.  
Power Sources  
This set should be operated only from the type of  
power source indicated on the marking label. If  
you are not sure of the type of electrical power  
supplied to your home, consult your dealer or  
local power company. For those sets designed to  
operate from battery power, or other sources, refer  
to the operating instructions.  
Power-Cord Protection  
Route the power cord so that it is not likely to be  
walked on or pinched by items placed upon or  
against them, paying particular attention to the  
plugs, receptacles, and the point where the cord  
exits from the appliance.  
Polarization  
This set may be equipped with a polarized ac  
power cord plug (a plug having one blade wider  
than the other).  
This plug will fit into the power outlet only one  
way. This is a safety feature. If you are unable to  
insert the plug fully into the outlet, try reversing  
the plug. If the plug should still fail to fit, contact  
your electrician to have a suitable outlet installed.  
Do not defeat the safety purpose of the polarized  
plug by forcing it in.  
Accessories  
Do not place the set on an unstable cart, stand,  
tripod, bracket, or table. The set may fall, causing  
serious injury to a child or an adult, and serious  
damage to the set. Use only a cart, stand, tripod,  
bracket, or table recommended by the  
manufacturer.  
Ventilation  
The slots and openings in the cabinet are provided  
for necessary ventilation. To ensure reliable  
operation of the set, and to protect it from  
overheating, these slots and openings must never  
be blocked or covered.  
Overloading  
Do not overload wall outlets, extension cords or  
convenience receptacles beyond their capacity,  
since this can result in fire or electric shock.  
– Never cover the slots and openings with a cloth  
or other materials.  
Object and Liquid Entry  
– Never block the slots and openings by placing  
the set on a bed, sofa, rug, or other similar  
surface.  
– Never place the set in a confined space, such as  
a bookcase, or built-in cabinet, unless proper  
ventilation is provided.  
Never push objects of any kind into the set  
through openings as they may touch dangerous  
voltage points or short out parts that could result  
in a fire or electric shock. Never spill liquid of any  
kind on the set.  
– Do not place the set near or over a radiator or  
heat register, or where it is exposed to direct  
sunlight.  
Attachments  
Do not use attachments not recommended by the  
manufacturer, as they may cause hazards.  
Continued ,  
3
 
IMPORTANT SAFEGUARDS (Continued)  
Lightning  
Safety Check  
For added protection for this set during a lightning  
storm, or when it is left unattended and unused for  
long periods of time, unplug it from the wall  
outlet and disconnect the antenna or cable system.  
This will prevent damage to the set due to  
lightning and power-line surges.  
Upon completion of any service or repairs to the  
set, ask the service technician to perform routine  
safety checks (as specified by the manufacturer)  
to determine that the set is in safe operating  
condition.  
Service  
Damage Requiring Service  
Unplug the set from the wall outlet and refer  
servicing to qualified service personnel under the  
following conditions:  
– When the power cord or plug is damaged or  
frayed.  
– If liquid has been spilled or objects have fallen  
into the set.  
– If the set has been exposed to rain or water.  
– If the set has been subject to excessive shock by  
being dropped, or the cabinet has been  
damaged.  
– If the set does not operate normally when  
following the operating instructions. Adjust  
only those controls that are specified in the  
operating instructions. Improper adjustment of  
other controls may result in damage and will  
often require extensive work by a qualified  
technician to restore the set to normal operation.  
– When the set exhibits a distinct change in  
performance – this indicates a need for service.  
Servicing  
Do not attempt to service the set yourself as  
opening or removing covers may expose you to  
dangerous voltage or other hazards.  
Refer all servicing to qualified service personnel.  
Replacement parts  
When replacement parts are required, be sure the  
service technician has used replacement parts  
specified by the manufacturer that have the same  
characteristics as the original parts.  
Unauthorized substitutions may result in fire,  
electric shock, or other hazards.  
4
Read this before operating your camcorder  
Before operating the unit, please read this  
manual thoroughly, and retain it for future  
reference.  
Owner’s Record  
The model and serial numbers are located on the  
bottom. Record the serial number in the space  
provided below. Refer to these numbers whenever  
you call upon your Sony dealer regarding this  
product.  
CAUTION  
The use of optical instruments with this product  
will increase eye hazard. Use of controls or  
adjustments or performance of procedures other  
than those specified herein may result in  
hazardous radiation exposure.  
Model No. DCR-  
Serial No.  
Model No. AC-  
No.  
Replace the battery with the specified type only.  
Otherwise, fire or injury may result.  
For customers in the U.S.A.  
If you have any questions about this product, you  
may call:  
Sony Customer Information Center  
1-800-222-SONY (7669).  
The number below is for the FCC related matters  
only.  
For customers in the U.S.A. and  
CANADA  
RECYCLING LITHIUM-ION BATTERIES  
Lithium-Ion batteries are  
recyclable. You can help preserve  
our environment by returning  
your used rechargeable batteries  
to the collection and recycling  
location nearest you.  
For more information regarding recycling of  
rechargeable batteries, call toll free 1-800-822-  
8837, or visit http://www.rbrc.org/  
Regulatory Information  
Declaration of Conformity  
Trade Name: SONY  
Model No.: DCR-DVD108  
Responsible Party:Sony Electronics Inc.  
Address: 16530 Via Esprillo, San Diego, CA  
92127 U.S.A.  
Telephone No.: 858-942-2230  
Caution: Do not handle damaged or leaking  
Lithium-Ion batteries.  
This device complies with Part 15 of the FCC  
Rules. Operation is subject to the following two  
conditions: (1) This device may not cause  
harmful interference, and (2) this device must  
accept any interference received, including  
interference that may cause undesired operation.  
Battery pack  
This device complies with Part 15 of the FCC  
Rules. Operation is subject to the following two  
conditions:  
(1) This device may not cause harmful  
interference, and (2) this device must accept any  
interference received, including interference that  
may cause undesired operation.  
This Class B digital apparatus complies with  
Canadian ICES-003.  
Continued ,  
5
 
Read this before operating your camcorder (Continued)  
digital device pursuant to Subpart B of Part 15 of  
FCC Rules.  
This product is not intended to be serviced.  
Should the product cease to function in its  
intended manner, it should be returned to the  
manufacturer or to be discarded.  
Declaration of Conformity  
Trade Name: SONY  
Model No.: DCR-DVD308  
Responsible Party:Sony Electronics Inc.  
Address: 16530 Via Esprillo, San Diego, CA  
92127 U.S.A.  
Telephone No.: 858-942-2230  
For the State of California, USA only  
Prechlorate Material - special handling may  
apply, See  
www.dtsc.ca.gov/hazardouswaste/perchlorate  
Perchlorate Material: Lithium battery contains  
perchlorate.  
This device complies with Part 15 of the FCC  
Rules. Operation is subject to the following two  
conditions: (1) This device may not cause  
harmful interference, and (2) this device must  
accept any interference received, including  
interference that may cause undesired operation.  
Notes on use  
CAUTION  
You are cautioned that any changes or  
modifications not expressly approved in this  
manual could void your authority to operate this  
equipment.  
Your camcorder is supplied with two  
kinds of operations guides.  
– “Operating Guide” (This manual)  
– “First Step Guide” for using your  
camcorder with the computer connected  
(stored on the supplied CD-ROM)  
Note  
This equipment has been tested and found to  
comply with the limits for a Class B digital  
device, pursuant to Part 15 of the FCC Rules.  
These limits are designed to provide reasonable  
protection against harmful interference in a  
residential installation. This equipment generates,  
uses, and can radiate radio frequency energy and,  
if not installed and used in accordance with the  
instructions, may cause harmful interference to  
radio communications.  
Types of the disc you can use in your  
camcorder  
You can use the following discs only.  
– 8cm DVD-RW  
– 8cm DVD+RW  
– 8cm DVD-R  
– 8cm DVD+R DL  
Use the discs with marks listed below. See  
page 14 for details.  
However, there is no guarantee that interference  
will not occur in a particular installation. If this  
equipment does cause harmful interference to  
radio or television reception, which can be  
determined by turning the equipment off and on,  
the user is encouraged to try to correct the  
interference by one or more of the following  
measures:  
– Reorient or relocate the receiving antenna.  
– Increase the separation between the equipment  
and receiver.  
– Connect the equipment into an outlet on a  
circuit different from that to which the receiver  
is connected.  
– Consult the dealer or an experienced radio/TV  
technician for help.  
For reliability durability of recording /  
playback, we recommend that you use Sony  
discs or discs with an  
VIDEO CAMERA) mark for your  
camcorder.  
*(for  
b Note  
• Using a disc other than above may cause the  
unsatisfactory recording/playback or you may  
not be able to remove the disc from your  
camcorder.  
The supplied interface cable must be used with the  
equipment in order to comply with the limits for a  
6
* Depending on the place you bought, the disc has  
mark.  
Types of “Memory Stick” you can use  
in your camcorder  
Viewfinder  
LCD screen  
You can use “Memory Stick Duo” marked  
with  
or  
(p. 101).  
“Memory Stick Duo”  
(This size can be used with your  
camcorder.)  
Battery  
• The camcorder is not dustproofed,  
dripproofed or waterproofed. See “About  
• To prevent discs from being broken or  
recorded images from being lost, do not  
do the following when either of the  
respective lamps of the POWER switch  
(p. 25) or the access lamps (p. 28, 29) is  
on:  
“Memory Stick”  
(You cannot use it in your camcorder.)  
– to remove the battery pack or AC  
Adaptor from the camcorder.  
– to apply mechanical shock or vibration to  
the camcorder.  
• You cannot use any type of memory card  
except “Memory Stick Duo.”  
• “Memory Stick PRO” and “Memory Stick  
PRO Duo” can be used only with  
“Memory Stick PRO” compatible  
equipment.  
• Do not attach a label or the like on a  
“Memory Stick Duo” or a Memory Stick  
Duo Adaptor.  
• When connecting your camcorder to  
another device with a USB cable, be sure  
to insert the connector plug in the correct  
way. Pushing the plug forcibly into the  
terminal will damage the terminal and  
may result in a malfunction of your  
camcorder.  
When using a “Memory Stick Duo”  
with “Memory Stick” compatible  
equipment  
Be sure to insert the “Memory Stick Duo”  
into the Memory Stick Duo Adaptor.  
About menu items, LCD panel,  
viewfinder, and lens  
• A menu item that is grayed out is not  
available under the current recording or  
playback conditions.  
Memory Stick Duo Adaptor  
• The LCD screen and the viewfinder are  
manufactured using extremely high-  
precision technology, so over 99.99% of  
the pixels are operational for effective  
use. However, there may be some tiny  
black points and/or bright points (white,  
red, blue, or green in color) that appear  
constantly on the LCD screen and the  
Using the camcorder  
• Do not hold the camcorder by the  
following parts.  
Continued ,  
7
Read this before operating your camcorder (Continued)  
viewfinder. These points are normal  
results of the manufacturing process and  
do not affect the recording in any way.  
operating procedures. Change the screen  
language before using your camcorder if  
necessary (p. 26).  
About this manual  
• The LCD screens and the viewfinder  
images and indicators shown in this  
manual were taken with a digital still  
camera, and may look different from what  
you actually see.  
Black point  
White, red, blue or  
green point  
• Design and specifications of recording  
media and other accessories are subject to  
change without notice.  
• The illustration used in this manual are  
based on the model DCR-DVD308.  
• Disc in this Operating Guide refers to 8cm  
DVD discs.  
• Exposing the LCD screen, the viewfinder,  
or the lens to direct sunlight for long  
periods of time may cause malfunctions.  
• Do not aim at the sun. Doing so might  
cause your camcorder to malfunction.  
Take images of the sun only in low light  
conditions, such as at dusk.  
About the Carl Zeiss lens  
Your camcorder is equipped with a Carl  
Zeiss lens, which was developed jointly by  
Carl Zeiss, in Germany, and Sony  
Corporation, and produces superior images.  
It adopts the MTF measurement system for  
video cameras and offers a quality typical  
of a Carl Zeiss lens.  
MTF= Modulation Transfer Function. The  
number value indicates the amount of light  
from a subject coming into the lens.  
On recording  
• Before starting to record, test the  
recording function to make sure the image  
and sound are recorded without any  
problems. You cannot delete images once  
you record them on a DVD-R/DVD+R  
DL. Use a DVD-RW/DVD+RW for trial  
About the marks used in this manual  
• Compensation for the contents of  
recordings cannot be provided, even if  
recording or playback is not possible due  
to a malfunction of the camcorder, storage  
media, etc.  
• The operations available depend on the  
disc used. The following marks are used  
to indicate the type of disc you can use  
for a particular operation.  
• TV color systems differ depending on the  
countries/regions. To view your  
recordings on a TV, you need an NTSC  
system-based TV.  
• Television programs, films, video tapes,  
and other materials may be copyrighted.  
Unauthorized recording of such materials  
may be contrary to the copyright laws.  
About language setting  
The on-screen displays in each local  
language are used for illustrating the  
8
   
Table of Contents  
Adjusting the exposure for backlit  
Selecting the aspect ratio (16:9 or 4:3)  
Read this before operating your  
Subject examples and solutions  
Playing back a series of still images  
What you can do with your  
Making the disc compatible with  
drives (Finalizing) .......................44  
HOME” and “ OPTION”  
menus ........................................18  
Step 1: Checking supplied items  
Dubbing to VCR or DVD/HDD  
Printing recorded images  
Step 2: Charging the battery pack  
Step 3: Turning the power on, and  
Changing the language setting  
(MANAGE DISC/MEMORY)  
Step 4: Preparing for recording  
Playing a disc on other devices  
Finding the right disc (DISC  
Step 5: Inserting a disc or a  
Deleting all scenes on the disc  
Recording and playing back with  
Recording sound with more presence  
DVD308/DVD708) ......................... 36  
Recording in dark places (NightShot  
Continued ,  
9
Table of Contents (Continued)  
What you can do with the  
HOME MENU ............................ 62  
Warning indicators and messages  
(Items to adjust beep and the  
Indicators displayed during  
(Items for when connecting other  
122  
Activating functions using the  
Recording items on the OPTION  
Viewing items on the OPTION MENU  
Functions set in the OPTION MENU  
What you can do with Windows  
Installing the “First Step Guide” and  
10  
Subject examples and solutions  
Shooting  
A child on the stage  
under a spot light  
Flowers in close-up  
BPORTRAIT...................................... 77  
BFOCUS............................................ 75  
BTELE MACRO ................................. 75  
BSPOTLIGHT.....................................77  
Focusing on the  
dog on the left side  
of the screen  
Fireworks with all  
its splendor  
BFOCUS............................................ 75  
BFIREWORKS....................................76  
BSPOT FOCUS.................................. 75  
BFOCUS ............................................75  
Getting a good shot  
of a ski slope or  
beach  
A sleeping child  
under dim light  
BBACK LIGHT................................... 37  
BBEACH............................................ 77  
BSNOW ............................................ 77  
BNightShot plus ................................37  
BCOLOR SLOW SHTR.......................78  
Checking your golf  
swing  
BSPORTS ......................................... 77  
11  
 
Enjoying with your camcorder  
What you can do with your camcorder  
Your camcorder records image data on 8cm DVD*.  
It is more convenient than video tape and far more versatile.  
Taking beautiful shots easily  
No rewinding to start recording (p.31, 34)  
Recorded images are stored in empty areas on the  
disc so there is no risk that valuable recordings are  
accidentally overwritten.  
Since no rewinding is necessary prior to recording,  
you can start shooting any time you desire.  
b Notes  
• Still images can be recorded only on "Memory Stick  
Duo."  
You can find a scene quickly using a VISUAL  
INDEX screen (p.32, 39)  
The VISUAL INDEX screen allows you to check  
recorded at a glance. All you have to do is touch the  
scene you want to view.  
The disc does not wear out no matter how many  
times you play it back. The precious moments you  
have captured on disc last for a long time.  
Records widescreen format and 5.1ch surround  
sound (p.36, 37)  
You can record high quality widescreen images on a wide  
LCD screen that shows the same 16:9 angle of view as a  
wide TV. Realistic 5.1ch surround sound can also be  
directly recorded onto the disc.  
b Notes  
• Some models may not support wide screen and 5.1 ch surround  
recording.  
*
DVD (Digital Versatile Disc) is a high-capacity optical disc.  
12  
       
A recorded disc can be played back on a variety of devices  
Playback on a DVD device or DVD drive (p.44)  
You can play back recorded and finalized** discs on a home  
DVD device, DVD recorder or DVD drive of a computer that  
supports 8cm disc.  
When finalizing the disc, you can create DVD menus to  
enable quick access to scenes you want to view.  
Playback on widescreen TV and home theater (p.42)  
Images recorded in widescreen format can be played back  
on a wide TV with complete panoramic effect. Discs are also  
recorded with 5.1ch surround sound to provide full sound on  
a home theater.  
b Notes  
• Some models may not support wide screen and 5.1 ch surround  
recording.  
Connecting camcorder to a computer  
High-speed image transfer (p.80)  
Image data can be quickly transferred to a computer  
without requiring playback.  
Computers with Hi-Speed USB (USB 2.0) provide  
even faster image transfer.  
Using the supplied software to edit and copy (p.80)  
Picture Motion Browser, the software supplied with your  
camcorder allows you to edit movies or still images stored  
in your computer to create your original DVD. Copying  
discs could not be easier enabling you to share your  
precious moments with family and friends.  
** Finalizing: a process to make it possible to play back recorded DVD on other DVD devices (p.44).  
13  
Choosing a disc  
Your camcorder is compatible with 8cm DVD-RW, DVD+RW, DVD-R and DVD+R DL.  
It does not support 12cm discs.  
Recording time  
Expected recordable time on one side of the disc.  
The recordable time varies depending on type of discs or recording mode.  
Apporoximate recordable time  
( ) : the minimum recording time  
Recording mode  
20 (18)  
30 (18)  
60 (44)  
35 (32)  
55 (32)  
110 (80)  
9M (HQ) (high quality)  
6M (SP) (standard quality)  
3M (LP) (long play)  
z Tips  
• Figures such as 9M and 6M in the table show the average bit rate. M stands for Mbps.  
• If you use a double-sided disc, you can record on both sides of the disc (p.100).  
Your camcorder uses the VBR (Variable Bit Rate) format to automatically adjust image quality to suit the  
recording scene. This technology causes fluctuations in the recording time of a disc. Movies containing  
quickly moving and complex images are recordedat a higher bit rate, and this reduces the overall recording  
time.  
Recording format for DVD-RW  
WhenyouuseaDVD-RW, you canchoosetherecordingformatfromVIDEOmodeorVR mode.  
In this manual, VIDEO mode is indicated as  
and VR mode as  
.
A recording format that is compatible with most DVD devices, especially after  
finalizing.  
In VIDEO mode, only the most recent image can be erased.  
A recording format that enables editing with your camcorder (deleting and  
rearranging the order of images).  
A finalized disc can be played back in DVD devices that support VR mode.  
VIDEO mode and VR mode  
Glossary (p.118)  
14  
         
Disc format features  
Figures in parentheses ( ) indicate page numbers.  
DVD-RW DVD+RW DVD-R DVD+R DL  
Disc types and symbols  
Symbols used in this manual  
Both 16:9 (wide) and 4:3 movie can be recorded  
z
z
z
z
z
z
z
on the same disc (37)  
Deleting the most recent recording (49)  
z
Deleting or editing recordings on your camcorder  
(48)  
Using a disc repeatedly even if the disc becomes  
z
z
z
z
z*1  
z
z
z
full by formatting*2 (59)  
*1  
*1  
Finalizing required to play on other devices (44)  
*3  
z
z
z
Creating the DVD menu when you finalize the disc  
(47)  
z
Making longer recordings on a side of a disc  
*
1 Refer to the instruction manual of your DVD device to see whether it supports the VR mode of DVD-RW.  
*2 Formatting deletes all recordings and returns the recording medium to its original empty state (p.59). Even  
when using a new disc, format it with your camcorder (p.28).  
*
3 Finalizing is required to play the disc in a DVD drive on a computer. A DVD+RW that is not finalized may  
cause the computer to malfunction.  
15  
       
Using your camcorder  
1Preparing  
(See page 21 to 30.)  
Select the disc that best suits your needs.  
Do you want to delete or edit images on your  
camcorder?  
Yes  
No  
Do you want to delete images and reuse  
the disc?  
Yes  
No  
For long recording  
* Select the recording format and format the disc on your camcorder (p.28).  
z Tips  
• You can select the disc from [DISC SELECT GUIDE] (p.58).  
2Recording, playback, editing  
(See pages 34, 39, and 48.)  
What you can do with your camcorder depends on the type of disc (p.15).  
3Viewing on your camcorder  
(See pages 32 and 39)  
You can also connect it to a TV for viewing  
(p.42).  
Continued on the next page  
16  
 
4Viewing on another DVD device  
(See pages 44, 57.)  
To view a disc recorded on your camcorder on other DVD devices, you need to finalize  
it first.  
Finalize  
DVD device /  
DVD recorder  
DVD drive  
Notes  
• The less the recording volume of the disc is, the more it takes time to finalize the disc.  
The features of a finalized disc depend on disc type.  
Finalize  
Finalize  
Recordings cannot be  
added even if there is free  
space left.  
Like commercially sold  
DVD, this disc can be  
played back in most DVD  
devices after finalizing.  
Unfinalizing allows you  
to add recordings (p.60).  
Finalize  
Finalize  
Thedisccanbeplayedback  
in a device compatible with  
the DVD-RW VR mode.  
Recordings can be added  
without unfinalizing.  
The disc can be played back without finalizing.  
But finalizing is required in some cases.  
For details, see page 44.  
Playback compatibility  
Playback compatibility with any DVDdevice is not guaranteed. Refer to the instruction manual  
supplied with your DVD device or consult your dealer.  
17  
“ HOME” and “ OPTION”  
- Taking advantage of two types of menus  
HOME MENU” - the starting point for operations with your  
camcorder  
(HELP)  
Displays a description of the item (p. 19)  
Category  
B Categories and items of the HOME MENU  
(CAMERA) category  
(MANAGE DISC/MEMORY)  
category  
Items  
Page  
MOVIE*  
PHOTO*  
Items  
Page  
FINALIZE*  
DISC SELECT GUIDE  
FORMAT*  
(VIEW IMAGES) category  
Items  
Page  
FORMAT*  
VISUAL INDEX*  
PLAYLIST  
UNFINALIZE  
DISC INFO  
(OTHERS) category  
(SETTINGS) category  
To customize your camcorder (p. 62).  
Items  
Page  
DELETE*  
EDIT  
* You can also set these items during Easy  
Handycam operation (p. 31). For items  
available in the  
page 63.  
(SETTINGS) category, see  
PLAYLIST EDIT  
PRINT  
COMPUTER  
18  
     
Using the HOME MENU  
4
5
Touch the item you want to use.  
Example: [EDIT]  
1
Turn the POWER switch to turn  
on your camcorder.  
Continue operation by following  
the guidance on the screen.  
To hide the HOME MENU screen  
2
Press  
(HOME) A (or B).  
Touch  
.
When you want to know something  
about the function of each item on the  
HOME MENU - HELP  
(HOME) B  
1 Press  
(HOME).  
The HOME MENU appears.  
(HOME) A  
2 Touch  
(HELP).  
The bottom of the  
turns orange.  
(HELP) button  
3
Touch the category you want to  
use.  
Example:  
(OTHERS) category  
Continued ,  
19  
   
HOME” and “ OPTION” (Continued)  
3 Touch the item you want to know the  
content.  
MOVIE  
Records a movie.  
Activate?  
YES  
NO  
When you touch an item, its explanation  
appears on the screen.  
To apply the option, touch [YES],  
otherwise, touch [NO].  
To deactivate the HELP  
Touch  
(HELP) again in step 2.  
Using the OPTION MENU  
Just a touch on the screen during recording  
or playback displays the functions available  
at that moment. You will find it easy to  
make various settings. See page 73 for  
further details.  
(OPTION)  
20  
 
GSetttiengpSta1rte:d Checking supplied items  
Rechargeable battery pack NP-FH40 (1)  
Make sure that you have the following  
items supplied with your camcorder.  
The number in the parentheses indicates the  
number of that item supplied.  
AC Adaptor (1) (p. 22)  
CD-ROM “Handycam Application  
Software” (1) (p. 80)  
Operating Guide (This manual) (1)  
Power cord (1) (p. 22)  
A/V connecting cable (1) (p. 42, 54)  
Wireless Remote Commander (DCR-  
DVD308/DVD708) (1) (p. 114)  
A button-type lithium battery is already installed.  
21  
       
Step 2: Charging the battery pack  
POWER switch  
2
1
3
DC IN jack  
Jack cover  
Battery  
DC plug  
4
CHG  
(charge)  
lamp  
4
Power cord  
AC Adaptor  
To the wall outlet  
You can charge the “InfoLITHIUM”  
battery pack (H series) (p. 103) after  
attaching it to your camcorder.  
4
5
Connect the power cord to the AC  
Adaptor and the wall outlet.  
The CHG (charge) lamp lights up and  
charging starts. The CHG (charge) lamp  
turns off when the battery is fully  
charged.  
Notes  
• You can use only "InfoLITHIUM" battery pack  
H series.  
1
2
Turn the POWER switch in the  
direction of the arrow to OFF  
(CHG) (The default setting).  
Disconnect the AC Adaptor from  
the DC IN jack on your  
camcorder.  
Attach the battery pack by sliding  
it in the direction of the arrow  
until it clicks.  
Notes  
• Disconnect the AC Adaptor from the DC IN  
jack holding both the camcorder and the DC  
plug.  
To remove the battery pack  
Turn the POWER switch to OFF(CHG).  
Slide the BATT (battery) release lever and  
remove the battery pack.  
3
Connect the AC Adaptor to the  
DC IN jack of your camcorder.  
Open the jack cover, and connect the  
DC plug of the AC Adaptor.  
Match the v mark on the DC plug with  
the v mark on your camcorder.  
22  
             
Remaining battery (approx.)  
BATT (battery)  
release lever  
Recording capacity (approx.)  
Notes  
Charging time  
• When you remove the battery pack or the AC  
Approximate time (min.) required when  
you fully charge a fully discharged battery  
pack.  
Adaptor, make sure that the  
(Movie) lamp/  
(Still) lamp (p. 25) is turned off.  
When storing the battery pack  
Battery pack  
Charging time  
Fully discharge the battery before storing it  
for an extended period.  
NP-FH40  
(supplied)  
125  
NP-FH50  
NP-FH70  
NP-FH100  
135  
170  
390  
To use an outside power source  
Make the same connections as you do when  
charging the battery pack. The battery pack  
will not lose its charge in this case.  
Recording time  
Approximate time (min.) available when  
you use a fully charged battery pack.  
To check the remaining battery  
(Battery Info)  
Set the POWER switch to OFF (CHG), then  
press DISP/BATT INFO.  
DCR-DVD108/DVD608  
Continuous  
recording  
time  
Typical  
recording  
time*  
Battery pack  
NP-FH40  
(supplied)  
95  
100  
110  
120  
235  
255  
545  
590  
45  
50  
NP-FH50  
NP-FH70  
NP-FH100  
50  
55  
After a while, the approximate recordable  
time and battery information appear for  
about 7 seconds. You can view the battery  
information for up to 20 seconds by  
pressing DISP/BATT INFO again while the  
information is displayed.  
110  
120  
260  
285  
Continued ,  
23  
       
Step 2: Charging the battery pack (Continued)  
DCR-DVD308/DVD708  
DCR-DVD308/DVD708  
Continuous  
recording  
time  
Typical  
recording  
time*  
LCD panel  
opened*  
LCD panel  
closed  
Battery pack  
Battery pack  
NP-FH40  
(supplied)  
110  
125  
NP-FH40  
(supplied)  
85  
95  
40  
45  
NP-FH50  
NP-FH70  
NP-FH100  
130  
280  
635  
145  
315  
725  
95  
45  
NP-FH50  
NP-FH70  
NP-FH100  
100  
110  
110  
215  
235  
235  
495  
545  
545  
50  
50  
* When the LCD backlight is on.  
50  
105  
110  
110  
235  
260  
260  
On the battery pack  
• Before changing the battery pack, Turn the  
POWER switch to OFF (CHG) and turn off the  
(Movie) lamp/  
(Still) lamp (p. 25).  
• The CHG (charge) lamp flashes during  
charging, or Battery Info (p. 23) will not be  
correctly displayed under the following  
conditions:  
– The battery pack is not attached correctly.  
– The battery pack is damaged.  
– The battery pack is worn-out (For Battery  
Info only).  
* Typical recording time shows the time when  
you repeat recording start/stop, turning the  
power on/off and zooming.  
• The power will not be supplied from the battery  
as long as the AC Adaptor is connected to the  
DC IN jack of your camcorder, even when the  
power cord is disconnected from the wall outlet.  
Notes  
• All times measured with recording mode [SP]  
under the following conditions:  
Top: When the LCD backlight turns on.  
Middle: When the LCD backlight turns off  
(DCR-DVD308/DVD708).  
• When attaching an optional video light, it is  
recommended that you use an NP-FH70/NP-  
FH100 battery pack (DCR-DVD308/DVD708).  
Bottom: Recording time when recording with  
the viewfinder while the LCD panel is closed.  
• We do not recommend using an NP-FH30,  
which only allows short recording and playback  
times, with your camcorder.  
Playing time  
Approximate time (min.) available when  
you use a fully charged battery pack.  
On the charging/recording/playback time  
• Times measured when using the camcorder at  
25 °C (77 °F) (10 °C to 30 °C (50 °F to 86 °F) is  
recommended).  
• The recording and playback time will be shorter  
when you use your camcorder in low  
temperatures.  
• The recording and playback time will be shorter  
depending on the conditions under which you  
use your camcorder.  
DCR-DVD108/DVD608  
LCD panel  
opened  
LCD panel  
closed  
Battery pack  
NP-FH40  
(supplied)  
120  
135  
NP-FH50  
NP-FH70  
NP-FH100  
140  
300  
695  
155  
330  
760  
On the AC Adaptor  
• Use the nearby wall outlet when using the AC  
Adaptor. Disconnect the AC Adaptor from the  
24  
 
Step 3: Turning the  
power on, and setting  
the date and time  
wall outlet immediately if any malfunction  
occurs while using your camcorder.  
• Do not use the AC Adaptor placed in a narrow  
space, such as between a wall and furniture.  
• Do not short-circuit the DC plug of the AC  
Adaptor or battery terminal with any metallic  
objects. This may cause a malfunction.  
• Even if your camcorder is turned off, AC power  
(house current) is still supplied to it while  
Set the date and time when using this  
camcorder for the first time. If you do not  
set the date and time, the [CLOCK SET]  
screen appears every time you turn on your  
camcorder or change the POWER switch  
position.  
POWER switch  
connected to the wall outlet via the AC Adaptor.  
1
While pressing the green button,  
turn the POWER switch  
repeatedly in the direction of the  
arrow until the respective lamp  
lights up.  
(Movie): To record movies  
(Still): To record still images  
The [CLOCK SET] screen appears.  
2
3
Select the desired geographical  
area with v/V, then touch [NEXT].  
Set [DST SET] or  
[SUMMERTIME], then touch  
[NEXT].  
Continued ,  
25  
     
Step 3: Turning the power on, and setting the date and time (Continued)  
camcorder without any operation attempted for  
approximately 5 minutes, to save battery power  
([A.SHUT OFF], p. 72).  
4
Set [Y] (year) with v/V.  
z Tips  
• The date and time does not appear during  
recording, but they are automatically recorded  
on the disc, and can be displayed during  
playback (see page 67 for [DATA CODE]).  
1
1
AM  
• Refer to page 99 for information concerning  
“World time difference.”  
• If the buttons on the touch panel do not work  
correctly, adjust the LCD screen  
([CALIBRATION], p. 105).  
5
6
7
Select [M] with b/B, then set the  
month with v/V.  
Changing the language setting  
Set [D] (day), hour and minute in  
the same way, then touch [NEXT].  
You can change the on-screen displays to  
show messages in a specified language.  
Touch  
(HOME) t  
(SETTINGS)t[CLOCK/  
LANG]t[ LANGUAGE SET], then  
select the desired language.  
Make sure that the clock is  
correctly set, then touch  
.
The clock starts.  
You can set any year up to the year  
2037.  
To turn off the power  
Turn the POWER switch to OFF (CHG).  
To reset the date and time  
Select  
(HOME) t  
(SETTINGS)  
t [CLOCK/ LANG] t [CLOCK SET],  
and set the date and time.  
b Notes  
• If you do not use your camcorder for about 3  
months, the built-in rechargeable battery gets  
discharged and the date and time settings may  
be cleared from the memory. In that case,  
charge the rechargeable battery and then set the  
date and time again (p. 107).  
• It takes a few seconds for your camcorder to be  
ready to shoot after the power is turned on. You  
cannot operate your camcorder during this time.  
• In the setting at the time of purchase, the power  
turns off automatically if you leave your  
26  
     
Step 4: Preparing for recording  
BATT INFO for a few seconds until  
disappears.  
Opening the lens cover  
Slide the LENS COVER switch to OPEN.  
b Notes  
• Do not press the buttons on the LCD frame  
when you open or adjust the LCD panel.  
z Tips  
• If you open the LCD panel 90 degrees to the  
camcorder, then rotate it 180 degrees to the lens  
side, you can close the LCD panel with the LCD  
screen facing out. This is convenient during  
playback operations.  
• On the HOME MENU, touch  
(SETTINGS)  
After recording, set the LENS COVER  
switch to CLOSE to close the lens cover.  
t [SOUND/DISP SET] t [LCD BRIGHT]  
(p. 69) to adjust the brightness of the LCD  
screen.  
• The information is displayed or hidden (display  
y no display) each time you press DISP  
BATT/INFO.  
LCD panel  
Open the LCD panel 90 degrees to the  
camcorder (1), then rotate it to the best  
angle to record or play (2).  
Viewfinder  
190 degrees to the  
You can view images using the viewfinder  
to avoid wearing down the battery, or when  
the image seen on the LCD screen is poor.  
camcorder  
290 degrees  
(max.)  
Viewfinder  
DISP/BATT INFO  
2180 degrees  
(max.)  
Viewfinder lens  
adjustment lever  
Move it until the  
image becomes  
clear.  
To turn off the LCD backlight to make  
the battery last longer  
(DCR-DVD308/DVD708)  
z Tips  
• You can adjust the brightness of the viewfinder  
Press and hold DISP/BATT INFO for a few  
backlight by selecting  
[SOUND/DISP SET] t [VF B.LIGHT] on the  
(SETTINGS) t  
seconds until  
appears.  
This setting is practical when you use your  
camcorder in bright conditions or you want  
to save battery power. The recorded image  
will not be affected by the setting. To turn  
on the LCD backlight, press and hold DISP/  
HOME MENU (p. 69).  
27  
             
Step 5: Inserting a disc or a “Memory Stick  
Duo”  
Disc  
A new 8 cm DVD-RW, DVD+RW, DVD-  
R, or DVD+R DL is required for recording  
(p. 14).  
b Notes  
• Remove dust or fingerprints from the disc  
beforehand, using a soft cloth (p.101).  
1
2
Check that the power of your  
camcorder is on.  
Set the disc with the label side facing  
out when using a single-sided disc.  
Turn the disc cover OPEN switch  
in the direction of the arrow  
(OPEN B).  
4
Close the disc cover.  
[DISC ACCESS] appears on the LCD  
screen.  
[PREPARING TO OPEN] appears on  
the LCD screen.  
It may take some time for the camcorder  
to recognize the disc.  
The disc cover slightly opens  
automatically.  
x DVD-RW/DVD+RW  
A screen appears to ask whether you  
will use [DISC SELECT GUIDE].  
Using [DISC SELECT GUIDE] lets you  
format the disc by following the  
guidance on the screen. If you do not  
want to use it, proceed to step 5.  
Disc cover  
OPEN switch  
Pickup lens  
x DVD-R/DVD+R DL  
You can start recording immediately  
after [DISC ACCESS] disappears from  
the LCD screen. You do not need to  
proceed to steps after step 5.  
ACCESS lamp  
(Disc)  
5
Touch the option that is right for  
you on the screen.  
When the disc cover  
opens slightly, open  
it further.  
x DVD-RW  
Select the recording format, [VIDEO]  
3
Set the disc with the recording  
side facing your camcorder, then  
press the center of the disc until it  
clicks.  
or [VR] (p. 14), then touch  
.
28  
         
• If you catch the belt when closing the disc  
cover, it may cause your camcorder to  
malfunction.  
• Do not touch the disc with the recording side or  
pickup lens (p.106).  
x DVD+RW  
Select the aspect ratio of the movie,  
[16:9 WIDE] or [4:3], then touch  
.
When using a double-sided disc, take care not to  
smudge the surface with fingerprints.  
• If you close the disc cover with the disc set  
incorrectly, it may cause your camcorder to  
malfunction.  
6
7
Touch [YES].  
Touch  
when [Completed.] is  
• Do not disconnect the power sources during  
formatting.  
displayed.  
When the formatting is completed, you  
can start recording on the disc.  
• Do not apply shock or vibration to your  
camcorder:  
– while the ACCESS lamp is on  
– while the ACCESS lamp is flashing  
– while [DISC ACCESS] or [PREPARING TO  
OPEN] is displayed on the LCD screen  
z Tips  
• When you use a DVD-RW while the Easy  
Handycam operation (p. 31) is set, the  
recording format is fixed to VIDEO  
mode.  
• It may take some time to remove the disc  
depending on the disc condition or recorded  
materials.  
• It may take up to 10 minutes to remove a disc if  
it is damaged or is dirty with fingerprints, etc. In  
that case, the disc might be damaged.  
To remove the disc  
1 Perform steps 1 and 2 to open the disc  
cover.  
z Tips  
• You can remove the disc when a power source  
is connected to your camcorder even when your  
camcorder is turned off. However, the disc  
recognition process (step 4) does not start.  
2 Press the disc holder in the center of the  
disc compartment, and remove the disc by  
holding the edge.  
• To delete all of the previously recorded images  
from a DVD-RW/DVD+RW, then to use it  
again to record new images, see “Deleting all  
• You can check the right disc using [DISC  
SELECT GUIDE] on the HOME MENU (page  
58).  
“Memory Stick Duo”  
You can use only a “Memory Stick Duo”  
marked with  
or  
b Notes  
z Tips  
• Be careful not to obstruct the operation with  
your hand or other objects, etc., when opening  
or closing the disc cover. Move the belt to the  
bottom of the camcorder, then open or close the  
disc cover.  
• The number of recordable images vary,  
depending on the image quality or the image  
size. For details, see page 66.  
1
Open the LCD panel.  
Continued ,  
29  
 
Step 5: Inserting a disc or a “Memory Stick Duo” (Continued)  
2
Insert the “Memory Stick Duo”  
into the “Memory Stick Duo” slot  
in the right direction until it clicks.  
Access lamp  
(“Memory Stick Duo”)  
To eject a “Memory Stick Duo”  
Lightly push the "Memory Stick Duo" in  
once and then slide it out of the slot.  
b Notes  
• Do not try to force the "Memory Stick Duo" out.  
Doing so may result in damage.  
• When the access lamp is lit or flashing, your  
camcorder is reading/writing data. Do not shake  
or knock your camcorder, turn the power off,  
eject the “Memory Stick Duo,” or remove the  
battery pack. Otherwise, image data may be  
damaged.  
• If you insert the “Memory Stick Duo” into the  
slot in the wrong direction, the “Memory Stick  
Duo,” the “Memory Stick Duo” slot, or image  
data may be damaged.  
30  
 
RecordinRg/Pelaycbaockrding and playing back with ease (Easy  
Handycam)  
Easy Handycam operation makes nearly all settings automatic so that you can perform  
recording or playing back operation without detailed settings. It also makes screen font size  
larger for easy viewing.  
Open the lens cover (p. 27)  
If the POWER  
switch is set to  
OFF (CHG), turn  
it while pressing  
the green button.  
*
DCR-DVD108/DVD608  
** DCR-DVD308/DVD708  
R
Movies  
Still Images  
1
Turn the POWER  
switch A until the  
(Movie) lamp  
1
Turn the POWER  
switch A until the  
(Still) lamp  
turns on.  
turns on.  
2
Press EASY B.  
2
3
Press EASY B.  
appears on the LCD screen.  
appears on the LCD screen.  
3
Press START/STOP C or D to  
start recording*.  
Press PHOTO E to record a still  
image**.  
6
FlashingtLights up  
[STBY]t[REC]  
Press PHOTO  
E lightly to  
adjust the  
Press PHOTO  
E fully to  
record the still  
image.  
To stop recording, press START/STOP  
again.  
focus.  
*
Movies are recorded in the [SP] recording mode.  
** Still images are recorded with the [FINE] quality on the "Memory Stick Duo."  
Continued ,  
31  
           
Recording and playing back with ease (Easy Handycam) (Continued)  
Viewing recorded movies/still images  
1
2
Turn the POWER switch A to turn on your camcorder.  
Press  
(VIEW IMAGES) F (or G).  
The VISUAL INDEX screen appears on the LCD screen. (It may take some time to  
display the VISUAL INDEX screen.)  
Returns to the  
recording screen  
Disc type  
Previous  
6 images  
Appears with the image on  
each of the tab that was  
lastly played back/recorded  
(B for the still image).  
Next  
6 images  
Returns to the recording  
screen  
Displays the movies  
Displays the still images  
3
Start playing back.  
Movies:  
Touch  
, then touch the movie you want to view.  
Return (to the VISUAL  
INDEX screen)  
Toggles Play or  
Pause as you touch  
Beginning of the scene/  
previous scene  
Next scene  
Stop (go to the  
VISUAL INDEXscreen)  
Reverse/ Forward  
32  
 
Still images:  
Touch , then touch the still image you want to view.  
Return (to the VISUAL  
INDEX screen)  
Slide show button  
Go to the VISUAL  
INDEX screen  
Previous/Next  
* [DATA CODE] is fixed to [DATE/TIME] (p. 67).  
z Tips  
Invalid buttons during Easy Handycam  
operation  
You cannot use some buttons/functions  
during Easy Handycam operation since  
they are automatically set (p. 85). [Invalid  
during Easy Handycam operation.] may  
appear if operations not available during  
Easy Handycam operation are attempted.  
• The screen returns to the VISUAL INDEX  
screen when the movies from the one you  
selected through the one at the end of the list are  
all played back.  
• You can slow down the playback speed by  
touching  
during pause.  
• You can adjust volume by selecting  
(HOME) t  
(SETTINGS) t [SOUND  
SETTINGS] t [VOLUME], then with  
To view movies on a disc on other  
devices (Finalize)  
To view movies stored on a disc on a DVD  
device or a computer, you need to "finalize"  
the disc. For details on finalize operation,  
see page 44.  
/
.
To cancel Easy Handycam operation  
Press EASY B again.  
from the screen.  
disappears  
Menu settings during Easy Handycam  
operation  
b Notes  
• For DVD-R, DVD+R DL, you cannot reuse the  
disc or record additional movies onto the disc  
once you finalize the disc even if the disc has  
free space.  
Press  
(HOME) H(or I) to display  
the menu items available for setup changes  
(p.18, 62).  
• During Easy Handycam operation, the DVD  
menu is fixed to [STYLE1].  
• You cannot record additional scenes on a  
finalized disc during Easy Handycam operation  
(p. 60).  
b Notes  
• You can neither delete nor edit movies on the  
disc during Easy Handycam operation.  
• Most of the menu items automatically return to  
the default settings. The settings of some menu  
items are fixed. For more details, see page 85.  
• DVD-RW are formatted in VIDEO mode  
(p. 14).  
(OPTION) will not appear.  
• Cancel Easy Handycam operation if you want to  
add effects to images or change settings.  
33  
   
Recording  
POWER switch A  
(HOME) E  
DCR-DVD108/DVD608  
Open the  
Lens cover  
PHOTO F  
(HOME) D  
START/STOP  
C
DCR-DVD308/DVD708  
(HOME) D  
START/STOP  
C
START/STOP B  
b Notes  
Adjusting the grip belt  
• If the access lamps (page 28, 29) is on after  
recording is finished, it means data is still being  
written onto the disc or “Memory Stick Duo.”  
Do not apply shock or vibration to your  
camcorder, and do not disconnect the battery or  
AC Adaptor.  
Adjust and fasten the grip belt as illustrated,  
and hold your camcorder properly.  
34  
     
Movies  
Still Images  
Movies are recorded on the disc. For  
recordable time, see page 14.  
Still images are recorded on the “Memory  
Stick Duo.” For the number of recordable  
still images, see page 66.  
1
2
Turn the POWER  
switch A until  
1
2
Turn the POWER  
switch A until the  
(Still) lamp  
the  
(Movie)  
lamp turns on.  
turns on.  
Press START/STOP B (or C).  
Press PHOTO F.  
FlashingtLights up  
Press slightly  
to focus  
Press full to  
record  
[STBY]t[REC]  
To stop recording, press START/STOP  
again.  
appears next to  
disappears, the image has been  
recorded.  
. When  
To switch to the movie recording  
mode using the  
(HOME) button D  
(or E)  
Touch  
(CAMERA) of HOME MENU  
t [MOVIE] or [PHOTO].  
Continued ,  
35  
   
Recording (Continued)  
zoom lever, the operation sound of the power  
zoom lever may also be recorded.  
• You cannot change the zoom speed with the  
zoom buttons on the LCD frame.  
• The minimum possible distance between  
camcorder and subject while maintaining sharp  
focus is about 1 cm (about 13/32 in.) for wide  
angle and about 80 cm (about 2 5/8 feet) for  
telephoto.  
Zooming  
You can zoom in up to the magnifications  
shown in the following table.  
(optical zoom)  
DCR-DVD108/DVD608  
DCR-DVD308/DVD708  
40 ×  
25 ×  
z Tips  
You can adjust the magnification with the  
zoom lever or the zoom button on the LCD  
frame.  
• Using [DIGITAL ZOOM] (p. 65) let you zoom  
in further than the magnification shown in the  
table.  
Recording sound with more  
presence (5.1ch surround  
recording) (DCR-DVD308/  
DVD708)  
Sound picked up by the built-in microphone  
is converted to 5.1ch surround sound and  
recorded.  
Built-in microphone  
Wider range of view:  
(Wide angle)  
Close view: (Telephoto)  
Your camcorder has Dolby Digital 5.1  
Creator installed for recording 5.1ch  
surround sound. Enjoy realistic sound when  
playingthediscondevicesthatsupport5.1ch  
surround sound.  
* DCR-DVD108/DVD608  
** DCR-DVD308/DVD708  
Move the power zoom lever slightly for a  
slower zoom. Move it further for a faster  
zoom.  
Dolby Digital 5.1 Creator, 5.1ch surround sound  
Glossary (p.118)  
b Notes  
b Notes  
[STEADYSHOT] may not reduce image  
blurring as desired when the power zoom lever  
is set to the T (Telephoto) side.  
• 5.1chsound isconvertedto2chwhen playedback  
on your camcorder.  
is displayed on the screen during 5.1ch  
recording/playback.  
• Be sure to keep your finger on the power zoom  
lever. If you move your finger off the power  
36  
             
Recording in dark places  
(NightShot plus)  
Recording in mirror mode  
Infrared port  
Open the LCD panel 90 degrees to the  
camcorder (1), then rotate it 180 degrees  
to the lens side (2).  
Set the NIGHTSHOT PLUS switch to ON.  
(
appears.)  
z Tips  
b Notes  
• A mirror-image of the subject appears on the  
LCD screen, but the image will be normal when  
recorded.  
• When recording in mirror mode, the images is  
not displayed in the viewfinder.  
• The NightShot plus and Super NightShot plus  
functions use infrared light. Therefore, do not  
cover the infrared port with your fingers or other  
objects, and remove the conversion lens  
(optional).  
• Adjust the focus manually ([FOCUS], p. 75)  
when it is hard to focus automatically.  
• Do not use the NightShot plus and Super  
NightShot plus functions in bright places. This  
may cause a malfunction.  
Selecting the aspect ratio (16:9  
or 4:3) (DCR-DVD308/DVD708)  
POWER switch  
z Tips  
• To record an image brighter, use Super  
NightShot plus function (p. 78). To record a  
movie more faithfully to the original colors, use  
Color Slow Shutter function (p. 78).  
Adjusting the exposure for  
backlit subjects  
WIDE SELECT  
To select the aspect ratio of the  
movies  
1 Turn the POWER switch until the  
(Movie) lamp turns on.  
2 Press WIDE SELECT repeatedly to select  
the desired screen aspect ratio.  
To adjust the exposure for backlit subjects,  
press BACK LIGHT to display .. To  
cancel the back light function, press BACK  
LIGHT again.  
Continued ,  
37  
                   
Recording (Continued)  
z Tips  
• Differences in the angle of view between 16:9  
(wide) and 4:3 vary depending on the zoom  
position.  
• When you view the movie on a TV, set [TV  
TYPE] to [16:9] or [4:3] according to your TV  
(16:9/4:3) (p. 42, 70).  
• When viewing 16:9 (wide) pictures with [TV  
TYPE] set to [4:3], pictures may appear rough  
depending on subjects (p. 42).  
To select the aspect ratio of the still  
images  
1 Turn the POWER switch until the  
(Still) lamp turns on.  
The aspect ratio of the picture switches to  
4:3.  
2 Press WIDE SELECT repeatedly to select  
the desired screen aspect ratio.  
b Notes  
• The size of still images is [  
[1.0M] (4:3) at the maximum.  
0.7M] (16:9) or  
z Tips  
• See page 66 for the number of recordable still  
images.  
• With the DCR-DVD108/DVD608, you can  
change the aspect ratio of movies in the HOME  
MENU. For details, see page 64.  
38  
Playback  
Zoom lever F  
DCR-DVD108/DVD608  
POWER  
switch A  
(HOME)  
D
(HOME) E  
(VIEW IMAGES) C  
(VIEW IMAGES) B  
DCR-DVD308/  
DVD708  
(HOME) D  
Turn the POWER switch A to turn on your camcorder.  
Press  
(VIEW IMAGES) B (or C).  
The VISUAL INDEX screen appears on the LCD screen. (It may take some time to  
display the VISUAL INDEX screen.)  
Returns to the  
recording screen  
Disc type  
Previous  
Appears with the image on  
each of the tab that was  
lastly played back/recorded  
(B for the still image).  
6 images  
Next  
6 images  
Returns to the  
recording screen  
(OPTION)  
Displays the movies  
Displays the still images  
z Tips  
• Moving the zoom lever F let you select whether to display 6 or 12 images on the VISUAL INDEX  
screen. To fix this number, touch  
DISPLAY] (p. 68).  
(SETTINGS) in the HOME MENU t [VIEW IMAGES SET] t  
[
Continued ,  
39  
       
Start playing back  
Movies  
Touch  
tab and the movie to be played back.  
The VISUAL INDEX screen reappears when playback from the selected movie until the  
last movie is completed.  
Return (to the VISUAL  
INDEX screen)  
Toggles Play or  
Pause as you touch  
Beginning of the scene/  
previous scene  
Next scene  
Stop (go to the  
VISUAL INDEXscreen)  
(OPTION)  
Reverse/ Forward  
Still Images  
Touch  
tab and the still image to be played back.  
Return (to the VISUAL  
INDEX screen)  
Slide show button  
(OPTION)  
Go to the VISUAL  
INDEX screen  
Previous/Next  
• One touch makes the reverse/fast forward  
approximately 5 times faster, two touches makes  
it approximately 10 times* faster.  
To switch to the playback mode  
using the  
(HOME) button D (or  
E)  
*
Approximately 8 times faster using a DVD+RW  
Touch  
INDEX]  
(VIEW IMAGES) t [VISUAL  
To adjust the movie volume  
Touch  
(OPTION) t  
tab t  
[VOLUME], then adjust it with  
/
.
z Tips  
• Touch  
/
during pause to play back  
movie slowly.  
40  
     
Using PB zoom  
Playing back a series of still  
images (Slide show)  
You can magnify still images from about  
1.1 to 5 times the original size.  
Magnification can be adjusted with the  
power zoom lever or the zoom buttons on  
the LCD frame.  
Touch  
screen.  
on the still image playback  
The slide show begins from the selected  
image.  
* DCR-DVD108/DVD608  
** DCR-DVD308/DVD708  
Touch  
to stop the slide show. To  
again.  
restart, touch  
1 Play back the still images you want to  
b Notes  
magnify.  
You cannot operate playback zoom during slide  
show.  
2 Magnify the still image with T  
(Telephoto).  
z Tips  
The screen is framed.  
• You can set continuous slide show playback  
using [SLIDE SHOW SET] on  
3 Touch the screen at the point you want  
to display in the center of the displayed  
frame.  
(OPTION)  
t
tab. The default setting is [ON]  
(continuous playback).  
4 Adjust the magnification with W (Wide  
angle)/T (Telephoto).  
To cancel, touch  
.
41  
         
Playing the picture on a TV  
Connect your camcorder to the input jack of TV or VCR using A/V connecting cable 1 or  
A/V connecting cable with S VIDEO 2. Connect your camcorder to the wall outlet using the  
supplied AC Adaptor for this operation (p.22). Refer also to the instruction manuals supplied  
with the devices to be connected.  
Device without  
S VIDEO jack  
Device with  
S VIDEO jack  
IN  
IN  
S VIDEO  
VIDEO  
VIDEO  
(Yellow)  
(White)  
(Red)  
1
(White)  
AUDIO  
AUDIO  
(Red)  
A/V OUT jack  
: Signal flow  
2
VCRs or TVs  
1 A/V connecting cable (supplied)  
To set the aspect ratio according to the  
connected TV (16:9/4:3)  
Connect to the input jack of the other device.  
2 A/V connecting cable with S VIDEO  
(optional)  
Change the setting according to the screen  
aspect ratio of the TV you will view pictures  
on.  
When connecting to another device via the S  
VIDEOjack, byusingan A/Vconnecting cable  
with an S VIDEO cable (optional), higher  
quality pictures can be produced than with an  
A/V connecting cable. Connect the white and  
red plug (left/right audio) and the S VIDEO  
plug(S VIDEOchannel)ofthe A/Vconnecting  
cable with an S VIDEO cable (optional). The  
yellow plug connection is not necessary. S  
VIDEO connection only will not output audio.  
1 Turn the POWER switch to turn on your  
camcorder.  
2 Touch  
(HOME) t  
(SETTINGS) t [OUTPUT  
SETTINGS] t [TV TYPE] t [16:9] or  
[4:3] t  
.
b Notes  
• When you connect your camcorder to a TV  
compatible with the ID-1/ID-2 system and play  
back the disc, set [TV TYPE] to [16:9]. The TV  
switches to full mode automatically. Refer also to  
the instruction manuals supplied with your TV.  
When your TV is connected to a VCR  
Connect your camcorder to the LINE IN  
input on the VCR. Set the input selector on  
theVCRtoLINE(VIDEO1, VIDEO2, etc.),  
if the VCR has an input selector.  
• When you set [TV TYPE] to [4:3], the image  
quality may deteriorate. Also, when the recorded  
42  
       
picture’s aspect ratio switches between 16:9  
(wide) and 4:3, the image may jitter.  
• When you play back a picture recorded in 16:9  
(wide) aspect ratio on a 4:3 TV not compatible  
with the 16:9 (wide) signal, set [TV TYPE] to  
[4:3].  
When your TV is monaural (When your  
TV has only one audio input jack)  
Connect the yellow plug of the A/V  
connecting cable to the video input jack and  
connect the white (left channel) or the red  
(right channel) plug to the audio input jack  
of your TV or VCR.  
z Tips  
You can display the counter on the TV screen by  
setting [DISP OUTPUT] to [V-OUT/PANEL]  
(p. 71).  
43  
Making the disc compatible with playback on  
other devices or DVD drives (Finalizing)  
Finalizing makes the recorded disc compatible for playback with other devices and DVD  
drives of computers.  
Before finalizing, you can select the style of the DVD menu which displays the image list  
(p. 47).  
Whether finalizing is required depends on the type of disc.  
DVD-RW/DVD-R/DVD+R DL require finalizing.  
DVD+RW do not require finalizing except in the following cases:  
1 To create a DVD menu  
2 To play back on a computer DVD drive  
3 If the disc has a short total recording time (less than 5 min in HQ mode, 8 min in SP mode, or  
15 min in LP mode)  
b Notes  
• Playback compatibility with all device is not guaranteed.  
• No DVD menu is created for DVD-RW (VR mode).  
Operation flow  
To play back a disc in a DVD device for the first time (p.46)  
Playback on  
other DVD device  
Finalize  
Incase1,  
2 or 3.  
Makedesiredsettingsfor  
the DVD menu.  
44  
     
To add recordings to a finalized disc (p.60)  
Recordings cannot be  
added.  
Make a new  
recording  
Unfinalize the disc.  
Recordings can be added as usual.  
When the DVD menu has been created, a  
confirmationscreenpromptsyoutoconfirmthat  
you wish to add a recording.  
b Notes  
• Even when you are using a DVD-RW or DVD+RW, you cannot record additional movies onto the disc  
after finalizing the disc during Easy Handycam operation. To do so, cancel Easy Handycam operation  
(p. 33).  
To play back a disc in a DVD device after adding a recording (p.46)  
Playback on  
other DVD device  
Finalize  
Only in case 1  
Makedesiredsettingsfor  
the DVD menu.  
Continued ,  
45  
Making the disc compatible with playback on other devices or DVD drives  
(Finalizing) (Continued)  
Finalizing a disc  
b Notes  
• It takes from a minute to a maximum of several  
hours to finalize a disc. The shorter the amount  
of material recorded on the disc, the longer it  
takes for finalizing.  
• Use the AC Adaptor as the power source to  
prevent your camcorder from running out of  
power during finalizing.  
5
6
Touch [YES] t [YES].  
Finalizing starts.  
When [Completed.] appears,  
touch  
.
• When you finalize a double-sided disc, you  
must finalize each side of the disc individually.  
b Notes  
• Do not apply shock or vibration to your  
camcorder, and do not disconnect the AC  
Adaptor during finalizing.  
When you need to disconnect the AC Adaptor,  
make sure that the power of your camcorder is  
set to off and disconnect the AC Adaptor after  
1
Place your camcorder in a stable  
position, and connect the AC  
Adaptor to the DC IN jack on your  
camcorder.  
the  
(Movie) or  
(Still) lamp goes off.  
Finalizing restarts when you connect the AC  
Adaptor and turn on your camcorder again.  
You cannot remove the disc until the finalizing  
operation is completed.  
2
3
4
Turn on the power by turning the  
POWER switch.  
• When using the discs other than DVD-RW (VR  
mode),  
Z flashes after finalizing is  
completed on the recording standby screen of  
your camcorder. Remove the disc from your  
camcorder.  
Insert the disc that you want to  
finalize.  
z Tips  
• When you set to create a DVD menu and  
finalize the disc, the DVD menu appears for a  
few seconds while finalizing the disc.  
• After the disc is finalized, the disc type/  
recording format indicator changes as shown  
below:  
Touch  
(MANAGE DISC/  
MEMORY) of the  
(HOME)  
menu t [FINALIZE].  
DVD-RW (VIDEO mode)  
DVD-RW (VR mode)  
DVD+RW  
To select a DVD menu style, touch  
(OPTION) t [DVD MENU]  
DVD-R  
DVD+R DL  
Go to step 5 if you want to finalize the  
disc using [STYLE1] (default setting).  
46  
     
To select a DVD menu style  
DVD  
+RW  
1 In step 4, touch  
(OPTION) t  
[DVD MENU].  
2 Select the desired style from 4 types of  
pattern with [T]/[t].  
Select [NO MENU] if you do not create  
a DVD menu.  
3 Touch  
.
b Notes  
• The DVD menu style is fixed to [STYLE1]  
during the Easy Handycam operation.  
47  
     
Editing (OTHERS) category Deleting images  
You can delete the images recorded on a  
This category enables you to edit or print  
disc or a “Memory Stick Duo” using your  
camcorder.  
images on a disc or "Memory Stick Duo,"  
or copy them onto your computer for  
Insert a recorded disc or “Memory Stick  
viewing, editing or creating an original  
Duo” into your camcorder.  
DVD.  
b Notes  
• You cannot retrieve the deleted images.  
• You cannot delete movies during Easy  
Handycam operation. Cancel the Easy  
Handycam operation first.  
z Tips  
(OTHERS) category  
• You can select up to 100 images at once.  
• You can delete images on the playback screen  
Item list  
from [DELETE] under  
tab.  
(OPTION) t  
DELETE  
You can delete images on a disc or a  
"Memory Stick Duo" (p. 48).  
Deleting the movies on the disc  
EDIT  
You can edit the images on a disc or a  
“Memory Stick Duo” (p. 50).  
1
Touch  
(OTHERS) of the  
PLAYLIST EDIT  
You can create and edit a Playlist (p. 51).  
(HOME) menu t [DELETE].  
PRINT  
2
3
4
Touch [  
Touch [  
DELETE].  
DELETE].  
You can print still images on a connected  
PictBridge printer (p. 55).  
COMPUTER  
You can connect your camcorder to a  
computer (p. 80).  
Touch the image that you want to  
delete.  
The selected image is marked with  
Press and hold the image on the LCD  
screen to confirm the image.  
.
48  
               
Touch  
screen.  
to return to the previous  
Deleting the still images in the  
“Memory Stick Duo”  
5
Touch  
t [YES] t  
.
1
Touch  
(OTHERS) of the  
(HOME) menu t [DELETE].  
To delete all movies on the disc at one  
time  
2
3
4
Touch [  
DELETE].  
Touch [ DELETE].  
In step 3, touch [  
[YES] t [YES] t  
DELETE ALL] t  
.
To delete the most recently recorded  
movie  
DVD  
Touch the still image that you  
want to delete.  
+RW  
In step 3, touch [  
LAST SCENE DEL]  
t
t [YES] t .  
b Notes  
• Do not remove the battery pack or the AC  
Adaptor from your camcorder while editing  
images. It may damage the disc.  
• If the deleted movie is included in the Playlist  
(p. 51), the movie is deleted also from the  
Playlist.  
• Even if you delete unnecessary images from the  
disc, the remaining disc capacity may not  
increase as much as you can make additional  
recording.  
• To delete all images recorded in the disc and  
restore the original capacity of the disc, format  
the disc (page 59).  
The selected still image is marked with  
.
Press and hold the still image on the LCD  
screen to confirm the still image.  
Touch  
to return to the previous  
screen.  
5
Touch  
t [YES] t  
.
To delete all still images on the  
“Memory Stick Duo”  
z Tips  
• The images recorded by this camcorder and  
stored onto a disc are called "original."  
In step 3, touch [ DELETE ALL] t  
[YES] t [YES] t  
.
b Notes  
• You cannot delete still images in the following  
cases:  
– "Memory Stick Duo" is write-protected.  
Continued ,  
49  
       
Deleting images (Continued)  
Dividing the image  
– write-protection is set to the still images by  
the other device.  
b Notes  
z Tips  
• You cannot divide movies during Easy  
Handycam operation. Cancel the Easy  
Handycam operation first.  
• To delete all images recorded on the “Memory  
Stick Duo,” format the “Memory Stick Duo”  
(p. 60).  
1
Touch  
(OTHERS) of the  
(HOME) menu t [EDIT].  
2
3
Touch [DIVIDE].  
Touch the movie that you want to  
divide.  
The selected movie starts playing.  
4
Touch  
at the point where  
you want to divide the movie into  
the scenes.  
The movie pauses.  
Adjusts the dividing point more  
precisely after the dividing point has  
been selected with  
.
Returns to the beginning of  
the selected movie.  
Play and pause toggles as you press  
.
5
Touch  
t [YES] t  
.
50  
   
Creating the Playlist  
b Notes  
• Movies cannot be restored once they are  
divided.  
• Do not remove the battery pack or the AC  
Adaptor from your camcorder while editing  
images. It may damage the disc.  
• Even if the divided movie is included in the  
Playlist, the movie is not divided in the Playlist.  
• A slight difference may occur from the point  
A Playlist is a list showing thumbnails of  
the movies that you have selected. The  
original scenes are not changed even  
though you edit or delete the scenes in the  
Playlist.  
Make sure to insert the recorded disc into  
your camcorder.  
where you touch  
and the actual dividing  
point, as your camcorder selects the dividing  
point based on about half-second increments.  
b Notes  
• You cannot add or edit movies during Easy  
Handycam operation. Cancel the Easy  
Handycam operation first.  
1
2
Touch  
(OTHERS) of the  
(HOME) menu t [PLAYLIST  
EDIT].  
Touch [  
ADD].  
3
Touch the scene that you want to  
add to the Playlist.  
.
The selected scene is marked with  
.
Press and hold the image on the LCD  
screen to confirm the image.  
Touch  
to return to the previous  
screen.  
4
Touch  
t [YES] t  
.
Continued ,  
51  
     
Creating the Playlist (Continued)  
2 Touch [ERASE].  
To add all the movies on the disc in  
the Playlist  
To erase all images at a time, touch  
[ERASE ALL] t [YES] t [YES] t  
.
In step 2, touch [ ADD ALL] t [YES]  
t [YES] t  
.
3 Touch the image that you want to erase  
from the Playlist.  
b Notes  
• Do not remove the battery pack or the AC  
Adaptor from your camcorder while editing the  
Playlist. It may damage the disc.  
z Tips  
• You can add a maximum of 999 movies to the  
Playlist.  
• You can add a movie when viewing it using  
The selected image is marked with  
.
[
ADD] on  
(OPTION) t  
tab.  
Press and hold the image on the LCD  
screen to confirm the image.  
Playing the Playlist  
Touch  
screen.  
to return to the previous  
Make sure to insert the disc on which the  
Playlist is added into your camcorder.  
4 Touch  
t [YES] t  
.
z Tips  
• The original images are not changed even if you  
erase the images from the Playlist.  
1
Touch  
(VIEW IMAGES) of the  
(HOME) menu t [PLAYLIST].  
The images added to the Playlist are  
displayed on the screen.  
Changing the order within the Playlist  
1 Touch  
(OTHERS) of the  
(HOME) menu t [PLAYLIST EDIT].  
2 Touch [MOVE].  
3 Select the image that you want to move.  
2
Touch the scene from which you  
want to play back.  
The selected scene is marked with  
.
The Playlist is played back from the  
selected scene to the end, then the  
screen returns to the Playlist screen.  
Press and hold the image on the LCD  
screen to confirm the image.  
Touch  
to return to the previous  
screen.  
4 Touch  
.
To erase added images from the  
Playlist at a time  
1 Touch  
(OTHERS) of the  
(HOME) menu t [PLAYLIST EDIT].  
52  
         
5 Select the destination with [T]/[t].  
z Tips  
• The original movies are not changed even if you  
divide the movie in the Playlist.  
Destination bar  
Press and hold the image on the LCD  
screen to confirm the image.  
6 Touch  
t [YES] t  
.
z Tips  
• When you select multiple images, the images  
are moved following the order appeared in the  
Playlist.  
Dividing a movie within the Playlist  
1 Touch  
(OTHERS) of the  
(HOME) menu t [PLAYLIST EDIT].  
2 Touch [DIVIDE].  
3 Select the movie that you want to divide.  
The playback of the selected movie  
starts.  
4 Touch  
at the point where you want  
to divide the movie into scenes.  
The movie pauses.  
Play and pause toggles as you press  
.
5 Touch  
t [YES] t  
.
b Notes  
• A slight difference may occur from the point  
where you touch and the actual dividing  
point, as your camcorder selects the dividing  
point based on about half-second increments.  
53  
 
Dubbing to VCR or DVD/HDD recorders  
You can dub images played back on your camcorder to other recording devices, such as VCRs  
or DVD/HDD recorders. Connect the device in either of the following ways.  
Connect your camcorder to the wall outlet using the supplied AC Adaptor for this operation  
(p. 22). Refer also to the instruction manuals supplied with the devices to be connected.  
b Notes  
• Since dubbing is performed via analog data transfer, the image quality may deteriorate.  
Device without  
S VIDEO jack  
Device with  
S VIDEO jack  
IN  
IN  
S VIDEO  
VIDEO  
VIDEO  
(Yellow)  
(White)  
(Red)  
1
(White)  
AUDIO  
AUDIO  
(Red)  
VCRs or DVD/  
HDD recorders  
A/V OUT jack  
: Video/Signal flow  
2
b Notes  
A A/V connecting cable (supplied)  
Connect to the input jack of the other  
device.  
• To hide the screen indicators (such as a counter,  
etc.) on the screen of the monitor device  
connected, set  
SETTINGS] t [DISP OUTPUT] t [LCD  
PANEL] (the default setting) on the HOME  
MENU (p. 71).  
• To record the date/time and camera settings  
data, display them on the screen (p. 67).  
• When you are connecting your camcorder to a  
monaural device, connect the yellow plug of the  
A/V connecting cable to the video input jack,  
and the red (right channel) or the white (left  
channel) plug to the audio input jack on the  
device.  
(SETTINGS) t [OUTPUT  
B A/V connecting cable with S  
VIDEO (optional)  
When connecting to another device via  
the S VIDEO jack, by using an A/V  
connecting cable with an S VIDEO  
cable (optional), higher quality images  
can be produced than with an A/V  
connecting cable. Connect the white and  
red plug (left/right audio) and the S  
VIDEO plug (S VIDEO channel) of the  
A/V connecting cable with an S VIDEO  
cable (optional). The yellow plug  
connection is not necessary. S VIDEO  
connection only will not output audio.  
54  
     
Printing recorded  
images (PictBridge  
compliant printer)  
You can print out still images using a  
PictBridge compliant printer, without  
connecting the camcorder to a computer.  
1
2
Insert the recorded disc into your  
camcorder.  
Turn on your camcorder, and  
press  
(VIEW IMAGES).  
Connect your camcorder to the AC Adaptor  
to obtain power from the wall outlet (p. 22).  
Insert the “Memory Stick Duo” containing  
still images into your camcorder and turn  
on the printer.  
Set [TV TYPE] according to the display  
device (p. 42, 70).  
3
4
Insert the recording media in the  
recording device.  
Connecting your camcorder to  
the printer  
If your recording device has an input  
selector, set it to the input mode.  
1
2
Turn on your camcorder.  
Connect your camcorder to the  
recording device (VCR or DVD/  
HDD recorder) with the A/V  
connecting cable (supplied) 1 or  
an A/V connecting cable with S  
VIDEO (optional) 2.  
Connect the (USB) jack of your  
camcorder to the printer using  
the USB cable (p. 113).  
[USB SELECT] appears on the screen  
automatically.  
Connect your camcorder to the input  
jacks of the recording device.  
3
Touch [  
PRINT].  
5
6
Start the playback on your  
camcorder, and record it on the  
recording device.  
When connection is complete,  
(PictBridge connecting) appears on  
the screen.  
Refer to the instruction manuals  
supplied with your recording device for  
details.  
When dubbing is finished, stop  
the recording device, and then  
your camcorder.  
One of the still images stored on the  
“Memory Stick Duo” will be displayed.  
b Notes  
• We can guarantee the operation of only models  
that are PictBridge compatible.  
Continued ,  
55  
     
Printing recorded images (PictBridge compliant printer) (Continued)  
b Notes  
• Refer also to the instruction manual of the  
Printing  
printer to be used.  
• Do not attempt the following operations when  
is on the screen. The operations may not be  
performed properly.  
1
Touch the still image to be  
printed.  
– To operate the POWER switch.  
– To press  
(VIEW IMAGES)  
– To disconnect the USB cable from the printer.  
– To remove the “Memory Stick Duo” from  
your camcorder  
• If the printer stops working, disconnect the USB  
cable, turn the printer off and on again, and  
restart the operation from the beginning.  
• You can select only the paper sizes that the  
printer can print.  
• On some printer models, the top, bottom, right,  
and left edges of images may be trimmed. If you  
print a still image recorded in a 16:9 (wide)  
ratio, the left and right ends of the image may be  
trimmed widely.  
The selected image is marked with  
.
Press and hold the image on the LCD  
screen to confirm the image.  
Touch  
screen.  
to return to the previous  
• Some printer models may not support the date  
printing function. Refer to your printer’s  
instruction manual for details.  
• You may not be able to print the following:  
– images edited by a computer  
– images recorded by other devices  
– images of 3MB or more  
– images with a pixel size larger than  
2848×2136  
2
3
Touch  
(OPTION), set the  
following options, then touch  
.
[COPIES]: Set number of copies of a  
still image to be printed. You can set up  
to 20 copies.  
[DATE/TIME]: Select [DATE],  
[DAY&TIME], or [OFF] (no date/time  
printed).  
z Tips  
• PictBridge is an industry standard established  
by the Camera & Imaging Products Association  
(CIPA). You can print still images without using  
a computer by connecting a printer directly to a  
digital video camera or digital still camera,  
regardless of model or manufacturer.  
[SIZE]: Select the paper size.  
If you do not change the setting, go to  
step 3.  
• You can print a still image when viewing it  
Touch [EXEC] t [YES] t  
The image selection screen appears  
again.  
.
using  
tab t [PRINT] on  
(OPTION).  
To finish printing  
Touch  
on the image selection screen.  
56  
   
Utilizing recording media  
Playing a disc on  
other devices  
(MANAGE DISC/  
MEMORY) category  
Playing a disc on other devices  
This category enables you to use a disc or a  
“Memory Stick Duo” for various purposes.  
Finalizing a disc (p. 44) let you view  
movies recorded by your camcorder on  
other DVD devices. However, we do not  
guarantee proper playback on all devices.  
DVD+RW do not require finalization to be  
played back on other devices.  
b Notes  
(MANAGE DISC/MEMORY)  
category  
• Do not use an 8 cm CD adaptor with an 8 cm  
DVD as it may cause a malfunction.  
• Make sure that a vertically installed device is  
placed in a position such as that the disc can be  
placed horizontally.  
• Some discs cannot be played back, may freeze  
for an instant between scenes. Some functions  
may be disabled on some devices.  
Item list  
FINALIZE  
You can enable discs to be played on other  
devices by finalizing them (p. 44).  
z Tips  
DISC SELECT GUIDE  
Your camcorder advises you of the right  
disc for your purpose (p. 58).  
• Devices that support subtitles can display the  
recording date and time where the subtitles  
normally appear (p. 65). Refer to the instruction  
manual of your device.  
• If you have created a DVD menu (p. 47), you  
can select the desired scene in the menu.  
FORMAT  
You can format and use the disc again  
Playing a disc on a computer  
FORMAT  
You can play a disc on a computer if a  
DVD playback application is installed on  
the computer.  
You can format and use the “Memory Stick  
Duo” again (p. 60).  
Insert the finalized disc into the DVD drive  
on your computer, and play back the disc  
using a DVD playback application.  
UNFINALIZE  
You can unfinalize a disc and record more  
images on it (p. 60).  
b Notes  
• Even when you use a DVD+RW, you must  
finalize the disc (p. 44). Otherwise, it may cause  
a malfunction.  
DISC INFO  
You can display the disc information.  
• Make sure that the DVD drive of the computer  
can play an 8 cm DVD.  
• Do not use an 8 cm CD adaptor with an 8 cm  
DVD as it may cause a malfunction.  
• The disc may not be played back, or the movies  
may not be played smoothly on some  
computers.  
Continued ,  
57  
               
Playing a disc on other devices  
(Continued)  
Finding the right disc  
(DISC SELECT GUIDE)  
Select the option that is right for you on the  
screen, then you will be informed of the  
appropriate disc for your purposes.  
• Movies stored on a disc cannot be copied  
directly onto a computer to be played back or  
edited.  
z Tips  
• For details on operations and procedures, see the  
“First Step Guide” on the supplied CD-ROM  
(p. 80).  
1
Touch  
MEMORY) of the  
(MANAGE DISC/  
(HOME).  
The volume label of the disc  
The date when the disc was first used is  
recorded (the default setting is 0:00AM  
January 1, 2007).  
<e.g.>  
When the disc was first used at 0:00 pm on  
January 1st 2007:  
2007_01_01_00H00M_AM  
2
3
Touch [DISC SELECT GUIDE].  
Touch the option that is right for  
you on the screen.  
Volume  
label  
When you answer all the questions, you  
will be informed of the right disc for  
you.  
If you insert the same type of disc as  
indicated in [DISC SELECT GUIDE],  
you can format it with your selected  
settings.  
z Tips  
• Images on discs are stored in the following  
folders:  
– DVD-RW (VR mode)  
DVD_RTAV folder  
– Other discs and modes  
VIDEO_TS folder  
58  
       
Deleting all scenes on the disc (Formatting)  
Formatting the disc  
4
Touch  
MEMORY) of the  
FORMAT].  
(MANAGE DISC/  
(HOME) t  
[
Formatting makes the recorded disc new  
and reusable by deleting all the data  
recorded on the disc. The recording  
capacity of the disc is recovered by  
formatting it.  
A DVD-R/DVD+R DL cannot be  
formatted. Replace it with a new  
disc.  
• Perform the following steps if your disc is  
DVD-RW or DVD+RW.  
x DVD-RW  
Select [VIDEO] or [VR] for the  
recording format (p. 14), then touch  
.
x DVD+RW  
Select the aspect ratio of the movie,  
If you format a finalized disc  
[16:9 WIDE] or [4:3], then touch  
.
• A DVD-RW (in VIDEO mode) returns to  
the unfinalized state. The disc must be  
finalized again to view its contents on  
other devices.  
• In the case of a DVD-RW (VR mode)/  
DVD+RW, formatting deletes all images  
on a finalized disc. One of the following  
5
6
Touch [YES].  
Touch  
when [Completed.] is  
displayed.  
icons,  
or  
, appears on the  
screen, but there is no need to finalize the  
disc again before playing the disc on other  
devices.*  
b Notes  
* To create the DVD menu on a DVD+RW,  
• Use the AC Adaptor as the power source to  
prevent your camcorder from running out of  
power during formatting.  
finalize the disc again (p. 44).  
• Do not apply shock or vibration to your  
camcorder, and do not disconnect the AC  
Adaptor during formatting.  
• When you use a double-sided disc, formatting is  
required on each side. You can format each side  
in the different recording format.  
1
Connect the AC Adaptor to the  
DC IN jack on your camcorder,  
then connect the power cord to  
the wall outlet.  
• In the case of DVD+RW , you cannot change  
the movie aspect ratio midway. Format the disc  
again to change the aspect ratio.  
• You cannot format a disc that has been  
protected on other devices. Cancel the  
protection with the original device, and then  
format it.  
2
3
Turn on your camcorder.  
Insert the disc that you want to  
format into your camcorder.  
Continued ,  
59  
       
Deleting all scenes on the disc  
(Formatting) (Continued)  
Recording additional  
scenes after finalizing  
z Tips  
• When you use a DVD-RW while the Easy  
Handycam operation (p. 31) is set, the recording  
format is fixed to the VIDEO mode.  
You can record additional movies on the  
finalized DVD-RWs/DVD+RWs after the  
following steps, if the disc has free space.  
When using the finalized DVD-RW  
(VR mode), you can record  
additional movies on the disc  
without an additional steps.  
Formatting the “Memory Stick  
Duo”  
Formatting deletes all images on a  
“Memory Stick Duo.”  
When using a DVD-RW (VIDEO  
mode) (Unfinalizing)  
1
2
Turn on your camcorder.  
Insert the "Memory Stick Duo"  
that you want to format into your  
camcorder.  
1
Connect the AC Adaptor to the  
DC IN jack on your camcorder,  
then connect the power cord to  
the wall outlet.  
3
Touch  
MEMORY) t [  
(MANAGE DISC/  
FORMAT]  
2
3
Turn on your camcorder.  
Insert the finalized disc into your  
camcorder.  
4
5
Touch  
MEMORY) of the  
[UNFINALIZE].  
(MANAGE DISC/  
(HOME) t  
4
5
Touch [YES] t [YES].  
When [Completed.] appears,  
Touch [YES] t [YES], then touch  
touch  
.
when [Completed.] appears.  
b Notes  
• Even the still images protected with another  
device against accidental deletion are also  
deleted.  
• Do not attempt the following operations when  
[Executing...] is on the screen:  
– To operate the POWER switch or buttons  
– To remove the “Memory Stick Duo”  
When using DVD+RW  
If you have created a DVD menu (p. 47)  
during finalizing, you must perform the  
following steps prior to recording  
additional movies.  
60  
           
• You cannot record additional material on the  
disc during the Easy Handycam operation.  
Cancel the Easy Handycam operation.  
1
Connect the AC Adaptor to the  
DC IN jack on your camcorder,  
then connect the power cord to  
the wall outlet.  
2
3
Turn the POWER switch to turn  
on the  
(Movie) lamp.  
Insert the finalized disc into your  
camcorder.  
A confirmation screen appears to  
prompt you to confirm that you wish to  
record additional scenes.  
4
5
Touch [YES] t [YES].  
When [Completed.] appears,  
touch  
.
b Notes  
• Use the AC Adaptor as power source to prevent  
your camcorder from running out of power  
during the operation.  
• Do not apply shock or vibration to your  
camcorder, and do not disconnect the AC  
Adaptor during the operation.  
• A DVD menu created during finalizing are  
deleted.  
• For a double-sided disc, perform these steps for  
each side of the disc.  
• You cannot record additional scenes on the  
DVD-R/DVD+R DL.  
61  
Customizing your camcorder  
What you can do with the  
category of the HOME MENU  
(SETTINGS)  
You can change the recording functions and  
the operating settings for your convenience.  
3
Touch the desired setup item.  
If the item is not on the screen, touch v/  
Using the HOME MENU  
V to change the page.  
1
Turn on your camcorder, then  
press  
(HOME).  
(HOME)  
4
5
Touch the desired item.  
If the item is not on the screen, touch v/  
V to change the page.  
(HOME)  
(SETTINGS) category  
Change the setting, then touch  
.
2
Touch  
(SETTINGS).  
62  
           
OUTPUT SETTINGS (p. 70)  
List of the (SETTINGS)  
category items  
Items  
Page  
TV TYPE  
DISP OUTPUT  
MOVIE SETTINGS (p. 64)  
Items  
Page  
CLOCK/ LANG (p. 71)  
REC MODE  
NIGHTSHOT LIGHT  
Items  
Page  
1
3
WIDE SELECT*  
CLOCK SET*  
DIGITAL ZOOM  
STEADYSHOT  
AUTO SLW SHUTTR  
REMAINING  
AREA SET  
DST SET/SUMMERTIME  
3
LANGUAGE SET*  
GENERAL SET (p. 72)  
SUB-T DATE  
Items  
Page  
PHOTO SETTINGS (p. 66)  
DEMO MODE  
CALIBRATION  
A.SHUT OFF  
Items  
Page  
2
3
IMAGE SIZE* *  
2
QUALITY  
REMOTE CTRL*  
FILE NO.  
1
* DCR-DVD108/DVD608  
NIGHTSHOT LIGHT  
2
* DCR-DVD308/DVD708  
2
3
FLASH LEVEL*  
* Also available during Easy Handycam  
operation.  
2
REDEYE REDUC*  
4
* Only [SOUND SETTINGS] is available  
during Easy Handycam operation.  
VIEW IMAGES SET (p. 67)  
Items  
Page  
DATA CODE  
DISPLAY  
4
SOUND/DISP SET* (p. 69)  
Items  
Page  
3
VOLUME*  
3
BEEP*  
LCD BRIGHT  
LCD BL LEVEL  
LCD COLOR  
VF B.LIGHT  
63  
   
MOVIE SETTINGS  
(Items for recording movies)  
NIGHTSHOT LIGHT  
When using the NightShot plus (p. 37) or  
[S. NIGHTSHOT PLS] (p. 78) function to  
record, you can record clearer images by  
setting [NIGHTSHOT LIGHT], which  
emits infrared light (invisible), to [ON] (the  
default setting).  
Touch 1, then 2.  
If the item is not on the screen, touch v/V  
to change the page.  
b Notes  
• Do not cover the infrared port with your fingers  
or other objects (p. 112).  
• Remove the conversion lens (optional).  
• The maximum shooting distance using  
[NIGHTSHOT LIGHT] is about 3 m (10 feet).  
How to set  
(HOME MENU) t page 62  
(OPTION MENU) t page 73  
The default settings are marked with B.  
WIDE SELECT (DCR-  
DVD108/DVD608)  
REC MODE (Recording  
mode)  
You can select the aspect ratio according to  
the TV connected.Refer also to the  
instruction manuals supplied with your TV.  
You can select an image quality of the  
movie from three levels.  
B 4:3  
HQ  
Records images to the full screen on a 4:3  
TV screen.  
Records in high quality mode.  
(9M (HQ))  
16:9 WIDE (  
Records images to the full screen on a 16:9  
(wide) TV screen.  
)
BSP  
Records in standard quality mode.  
(6M (SP))  
b Notes  
LP  
• When you connect your camcorder to a TV  
compatible with the ID-1/ID-2 system and play  
back the disc, set [TV TYPE] to [16:9]. The TV  
switches to full mode automatically. Refer also  
to the instruction manuals supplied with your  
TV.  
Increases the recording time (Long Play).  
(3M (LP))  
b Notes  
• If you record in the LP mode, the quality of  
scenes may be degraded, or scenes with quick  
movements may appear with a block noise when  
you play back the disc.  
• Set [TV TYPE] correctly according to the TV  
connected for playback (p. 70).  
z Tips  
• See page 14 on the expected recording time of  
each recording mode.  
64  
                           
DIGITAL ZOOM  
STEADYSHOT  
You can select the maximum zoom level in  
case you want to zoom greater than optical  
zoom magnification (p. 36). Note that the  
image quality decreases when you use the  
digital zoom.  
You can compensate for camera shake (the  
default setting is [ON]). Set  
[STEADYSHOT] to [OFF] ( ) when  
using a tripod (optional), then the image  
becomes natural.  
AUTO SLW SHUTTR  
(Auto slow shutter)  
When this is set to [ON] (the default  
setting), the shutter speed is automatically  
reduced to 1/30 second when recording in  
dark conditions.  
The right side of the bar shows the digital  
zooming factor. Thezooming zoneappears  
when you select the zooming level.  
For DCR-DVD108/DVD608  
REMAINING  
B OFF  
B AUTO  
Up to 40 × zoom is performed optically.  
Displays the remaining disc indicator for  
about 8 seconds in situations such as those  
described below.  
– When your camcorder recognizes the  
remaining disc capacity with the POWER  
80×  
Upto 40× zoom is performed optically, and  
after that up to 80 × zoom is performed  
digitally.  
switch set to  
– When you press DISP/BATT INFO to  
switch the indicator from off to on with  
the POWER switch set to  
– When you select the movie recording  
mode on the HOME MENU.  
(Movie).  
2000×  
Upto 40× zoom is performed optically, and  
after that, up to 2,000 × zoom is performed  
digitally.  
(Movie).  
For DCR-DVD308/DVD708  
ON  
B OFF  
Always displays the remaining disc  
indicator.  
Up to 25 × zoom is performed optically.  
50×  
b Notes  
Upto 25× zoom is performed optically, and  
after that up to 50 × zoom is performed  
digitally.  
• When the remaining recordable time for movies  
is less than 5 minutes, the indicator stays on the  
screen.  
2000×  
Upto 25× zoom is performed optically, and  
after that, up to 2,000 × zoom is performed  
digitally.  
SUB-T DATE  
Select [ON] (the default setting) to display  
the recording date and time when you play  
back a disc on a device with a subtitle  
display function. Also refer to the  
instruction manual of the playback device.  
65  
                       
PHOTO SETTINGS  
(Items for recording still images)  
1.0M  
0.7M  
VGA (0.3M)  
1152 × 864 1152 × 648 640 × 480  
900  
1200  
2850  
2450  
5900  
2850  
7200  
5900  
14500  
512MB  
1GB  
2400  
1800  
4900  
3750  
5000  
12000  
30000  
23500  
59000  
Touch 1, then 2.  
If the item is not on the screen, touch v/V  
to change the page.  
2GB  
10000  
12000  
7400  
19500  
9500  
23500  
4GB  
How to set  
b Notes  
(HOME MENU) t page 62  
(OPTION MENU) t page 73  
• All numbers measured at the following settings:  
Top: [FINE] is selected for image quality.  
Bottom: [STANDARD] is selected for image  
quality.  
The default settings are marked with B.  
• When using the “Memory Stick Duo” made by  
Sony Corporation. Thenumber of recordable still  
images varies depending on the recording  
environment.  
IMAGE SIZE (DCR-  
DVD308/DVD708)  
B1.0M (  
Records still images clearly.  
)
QUALITY  
B FINE (  
)
VGA (0.3M) (  
)
Records still images at the fine image  
quality level.  
Allows for the maximum number of images  
to be recorded.  
STANDARD (  
Records still images at the standard image  
quality level.  
)
b Notes  
• When the picture ratio is changed to 16:9, the  
image size is changed to [  
(p. 37).  
0.7M] (  
)
FILE NO. (File number)  
Youcan only select the imagesize for still images.  
B SERIES  
z Tips  
Assigns file numbers in sequence even if  
the “Memory Stick Duo” is replaced with  
another one.  
• The image size of DCR-DVD108/DVD608 is set  
to [VGA (0.3M)](  
).  
Number of still images recordable on  
a “Memory Stick Duo” (approx.)  
RESET  
Assigns file numbers for each “Memory  
Stick Duo”  
1.0M  
0.7M  
VGA (0.3M)  
1152 × 864 1152 × 648 640 × 480  
NIGHTSHOT LIGHT  
120  
325  
160  
390  
390  
980  
64MB  
See page 64.  
245  
650  
445  
1150  
325  
780  
590  
1400  
780  
128MB  
256MB  
1970  
1400  
3550  
66  
                     
VIEW IMAGES SET  
(Items to customize the display)  
FLASH LEVEL (DCR-  
DVD308/DVD708)  
You can set this function when you use an  
external flash (optional) that is compatible  
with your camcorder.  
HIGH(  
)
Touch 1, then 2.  
If the item is not on the screen, touch v/V  
to change the page.  
Makes the flash level higher.  
B NORMAL(  
LOW(  
)
How to set  
)
Makes the flash level lower.  
(HOME MENU) t page 62  
(OPTION MENU) t page 73  
REDEYE REDUC  
The default settings are marked with B.  
(Redeye reduction)  
(DCR-DVD308/DVD708)  
DATA CODE  
You can set this function when you use an  
external flash (optional) that is compatible  
with your camcorder.  
You can prevent redeye by activating the  
flash before recording.  
During playback, displays the information  
(data code) recorded automatically at the  
time of recording.  
B OFF  
Data code is not displayed.  
Set [REDEYE REDUC] to [ON] to use this  
function.  
DATE/TIME  
Displays the date and time.  
b Notes  
• The redeye reduction may not produce the  
desired effect due to individual differences and  
other conditions.  
CAMERADATA (below)  
Displays camera setting data.  
DATE/TIME  
SP  
ADate  
BTime  
Continued ,  
67  
                     
VIEW IMAGES SET (Continued)  
CAMERADATA  
DISPLAY  
Movie  
You can select the number of thumbnails that  
appear on the VISUAL INDEX screen.  
SP  
B ZOOM LINK  
Change the number of thumbnails (6 or 12)  
with the zoom lever on your camcorder.*  
6IMAGES  
Displays thumbnails of 6 images.  
Still image  
12IMAGES  
Displays thumbnails of 12 images.  
* You can operate with the zoom buttons on the  
LCD frame or on the Remote Commander  
(For DCR-DVD308/DVD708).  
CSteadyShot off  
DBrightness  
EWhite balance  
FGain  
GShutter speed  
HAperture value  
IExposure  
z Tips  
appears in the following cases:  
– during displaying still images recorded using  
an external flash (DCR-DVD308/DVD708).  
– during displaying still images recorded by  
another device using a flash.  
• The data code is displayed on the TV screen if  
you connect your camcorder to a TV.  
• The indicator toggles through the following  
sequences as you press DATA CODE on the  
Remote Commander: [DATE/TIME] t  
[CAMERADATA] t [OFF] (no  
indication)(DCR-DVD308/DVD708).  
• Depending on the disc condition, bars [--:--:--]  
appear.  
68  
     
SOUND/DISP SET  
(Items to adjust beep and the screen)  
B NORMAL  
Standard brightness.  
BRIGHT  
Brightens the LCD screen.  
b Notes  
• When you connect your camcorder to outside  
power sources, [BRIGHT] is automatically  
selected for the setting.  
• When you select [BRIGHT], battery life is  
slightly reduced during recording.  
• If you open the LCD panel 180 degrees to face  
the screen outside and close the LCD panel to  
the camcorder body, the setting becomes  
[NORMAL] automatically.  
Touch 1, then 2.  
If the item is not on the screen, touch v/V  
to change the page.  
How to set  
(HOME MENU) t page 62  
(OPTION MENU) t page 73  
The default settings are marked with B.  
z Tips  
• This adjustment does not affect the recorded  
images in any way.  
VOLUME  
Touch  
/
to adjust the volume  
LCD COLOR  
You can adjust the color of the LCD screen  
with  
/
.
BEEP  
B ON  
A melody sounds when you start/stop  
recording, or operate the touch panel.  
Low intensity  
z Tips  
• This adjustment does not affect the recorded  
images in any way.  
High intensity  
OFF  
Cancels the melody and shutter sound.  
LCD BRIGHT  
VF B.LIGHT (Viewfinder  
brightness)  
You can adjust the brightness of the LCD  
screen.  
You can adjust the brightness of the  
viewfinder.  
1 Adjust the brightness with  
/
.
2 Touch  
.
B NORMAL  
Standard brightness.  
z Tips  
BRIGHT  
Brightens the viewfinder screen.  
• This adjustment does not affect the recorded  
images in any way.  
b Notes  
LCD BL LEVEL (LCD  
backlight level)  
• When you connect your camcorder to outside  
power sources, [BRIGHT] is automatically  
selected for the setting.  
• When you select [BRIGHT], battery life is  
slightly reduced during recording.  
You can adjust the brightness of the LCD  
screen’s backlight.  
Continued ,  
69  
                             
SOUND/DISP SET (Continued)  
OUTPUT SETTINGS  
(Items for when connecting other devices)  
z Tips  
• This adjustment does not affect the recorded  
images in any way.  
Touch 1, then 2.  
If the item is not on the screen, touch v/V  
to change the page.  
How to set  
(HOME MENU) t page 62  
(OPTION MENU) t page 73  
The default settings are marked with B.  
TV TYPE  
You need to convert the signal depending  
on the TV connected when playing back the  
image. The recorded images are played  
back as following illustrations.  
16:9  
(Default setting for DCR-DVD308/  
DVD708)  
Select to view your images on a 16:9  
(wide) TV.  
Wide (16:9)  
images  
4:3 images  
4:3  
(Default setting for DCR-DVD108/  
DVD608)  
Select to view your images on a 4:3  
standard TV.  
Wide (16:9)  
images  
4:3 images  
70  
             
CLOCK/ LANG  
(Items to set clock and language)  
DISP OUTPUT  
B LCD PANEL  
Shows displays such as the time code on  
the LCD screen and in the viewfinder.  
V-OUT/PANEL  
Shows displays such as the time code on  
the TV screen, LCD screen, and in the  
viewfinder.  
Touch 1, then 2.  
If the item is not on the screen, touch v/V  
to change the page.  
How to set  
(HOME MENU) t page 62  
(OPTION MENU) t page 73  
CLOCK SET  
See page 25.  
AREA SET  
You can adjust a time difference without  
stopping the clock.  
Set your local area using v/V when using  
your camcorder overseas.  
Refer to the world time difference on page  
DST SET/SUMMERTIME  
You can change this setting without  
stopping the clock.  
Set to [ON] to move the time forward  
1 hour.  
LANGUAGE SET  
You can select the language to be used on  
the LCD screen.  
z Tips  
• Your camcorder offers [ENG[SIMP] ]  
(simplified English) for when you cannot  
find your native tongue among the  
options.  
71  
                       
GENERAL SET  
(Other setup items)  
A.SHUT OFF (Auto shut  
off)  
B 5min  
The camcorder is automatically turned off  
when you do not operate your camcorder  
for more than approximately 5 minutes.  
Touch 1, then 2.  
If the item is not on the screen, touch v/V  
to change the page.  
NEVER  
The camcorder is not automatically turned  
off.  
How to set  
b Notes  
(HOME MENU) t page 62  
(OPTION MENU) t page 73  
• When you connect your camcorder to a wall  
outlet, [A.SHUT OFF] is automatically set to  
[NEVER].  
The default settings are marked with B.  
REMOTE CTRL (Remote  
control) (DCR-DVD308/  
DVD708)  
DEMO MODE  
The default setting is [ON], allowing you to  
view the demonstration in about 10  
minutes, after you turn the POWER switch  
The default setting is [ON], allowing you to  
use the supplied Remote Commander  
(p. 114).  
to  
(Movie).  
z Tips  
z Tips  
• The demonstration will be suspended in  
situations such as those described below.  
– When you press START/STOP.  
• Set to [OFF] to prevent your camcorder from  
responding to a command sent by another VCR  
remote control unit.  
– When you touch the screen during the  
demonstration (The demonstration starts  
again after about 10 minutes).  
– When you slide the disc cover open switch.  
– When you remove or insert a “Memory Stick  
Duo.”  
– When you set the POWER switch to  
(Still).  
– When you press  
IMAGES).  
(HOME)/  
(VIEW  
CALIBRATION  
72  
                 
Activating functions using the OPTION MENU  
The OPTION MENU appears just like the  
pop-up window that appears when you  
When the item you want is not on the  
screen  
right-click the mouse on a computer.  
Touch another tab. If you cannot find the  
Various functions are displayed in the  
item anywhere, the function does not work  
context of the operation.  
under the situation.  
b Notes  
Using the OPTION MENU  
• The tabs and items that appear on the screen  
depend on the recording/playback status of your  
camcorder at the time.  
• Some items appear without a tab.  
• The OPTION MENU cannot be used during  
Easy Handycam operation.  
1
While using your camcorder,  
touch  
(OPTION) on the screen.  
(OPTION)  
Tab  
2
3
Touch the desired item.  
If you cannot find the desired item,  
touch another tab to change the page.  
Change the setting, then touch  
.
Continued ,  
73  
     
Activating functions using the  
OPTION MENU (Continued)  
Recording items on the OPTION  
MENU  
Viewing items on the OPTION  
MENU  
See page 73 for setting operation.  
See page 73 for setting operation.  
Items  
*
Page  
Items  
tab  
*
Page  
tab  
-
-
-
-
-
-
-
-
-
a
a
FOCUS  
DELETE  
SPOT FOCUS  
TELE MACRO  
EXPOSURE  
DELETE ALL  
tab  
DIVIDE  
a
a
a
a
SPOT METER  
SCENE SELECTION  
WHITE BAL.  
ERASE  
ERASE ALL  
MOVE  
COLOR SLOW SHTR  
S. NIGHTSHOT PLS  
-- (A tab depends on the situation)  
a
a
a
-
tab  
ADD  
-
-
-
FADER  
ADD ALL  
D.EFFECT  
PICT.EFFECT  
PRINT  
SLIDE SHOW  
VOLUME  
a
a
-
tab  
DATA CODE  
SLIDE SHOW SET  
ADD  
a
-
REC MODE  
MICREF LEVEL  
IMAGE SIZE**  
QUALITY  
a
a
a
a
-
ADD ALL  
SELF-TIMER  
FLASH MODE**  
-- (No tab)  
COPIES  
-
-
-
-
-
DATE/TIME  
SIZE  
* Items that are included also in the HOME  
MENU.  
** DCR-DVD308/DVD708  
DVD MENU  
* Items that are included also in the HOME  
MENU.  
74  
   
Functions set in the OPTION MENU  
displayed correctly if you are using a conversion  
lens (optional).)  
– When the focus mode is switched from  
automatic to manual.  
– When you set focus manually  
Items you can set only on the OPTION  
MENU will be described below.  
How to set  
(HOME MENU) t page 62  
(OPTION MENU) t page 73  
SPOT FOCUS  
The default settings are marked with B.  
You can select and adjust the focal point to  
aim it at a subject not located at the center  
of the screen.  
FOCUS  
You can adjust the focus manually. You can  
select this function also when you want to  
focus on a certain subject intentionally.  
1 Touch the subject on the screen.  
9 appears.  
2 Touch [END].  
1 Touch [MANUAL].  
9 appears.  
2 Touch  
(focusing on close subjects)/  
To adjust the focus automatically, touch  
(focusing on distant subjects) to  
[AUTO] t [END] in step 1.  
sharpen the focus.  
appears when the  
focus cannot be adjusted any closer, and  
appears when the focus cannot be adjusted  
farther away.  
b Notes  
• If you set [SPOT FOCUS], [FOCUS] is  
automatically set to [MANUAL].  
3 Touch  
.
To adjust the focus automatically, touch  
TELE MACRO  
[AUTO] t  
in step 1.  
This is useful to shoot small subjects, such  
as flowers or insects. You can blur out  
backgrounds and the subject stands out  
clearer.  
b Notes  
• The minimum possible distance between  
camcorder and subject while maintaining sharp  
focus is about 1 cm (about 13/32 in.) for wide  
angle and about 80 cm (about 2 5/8 feet) for  
telephoto.  
When you set [TELE MACRO] to [ON]  
(
), the zoom (p. 36) moves to the top of  
the T (telephoto) side automatically and  
allows recording subjects at a close distance  
as follows;  
DCR-DVD108/DVD608  
down to about 43 cm (17 in.)  
DCR-DVD308/DVD708  
z Tips  
• It is easier to focus on the subject by moving the  
power zoom lever towards T (telephoto) to  
adjust the focus, then towards W (wide angle) to  
adjust the zoom for recording. When you want  
to record a subject at close range, move the  
power zoom lever to W (wide angle), then  
adjust the focus.  
down to about 38 cm (15 in.)  
• The focal distance information (the distance at  
which the subject is focused on, for when it is  
dark and hard to adjust focus) appears for a few  
seconds in the following cases. (It will not be  
Continued ,  
75  
             
Functions set in the OPTION MENU (Continued)  
appears.  
2 Touch [END].  
To cancel, touch [OFF], or zoom to wide-  
angle (W side).  
To return the setting to automatic exposure,  
touch [AUTO] t [END] in step 1.  
b Notes  
• When recording a distant subject, focusing may  
be difficult and can take some time.  
b Notes  
• Adjust the focus manually ([FOCUS], p. 75)  
when it is hard to focus automatically.  
• If you set [SPOT METER], [EXPOSURE] is  
automatically set to [MANUAL].  
EXPOSURE  
SCENE SELECTION  
You can fix the brightness of an image  
manually. Adjust [EXPOSURE] when the  
subject is too bright or too dark relative to  
the background.  
You can record images effectively in  
various situations with the [SCENE  
SELECTION] function.  
B AUTO  
Select this to automatically record images  
effectively without the [SCENE  
SELECTION] function.  
TWILIGHT* (  
)
Select this to take night view without  
losing the mood.  
1 Touch [MANUAL].  
appears.  
2 Adjust the exposure by touching  
/
.
3 Touch  
To return the setting to automatic exposure,  
touch [AUTO] t in step 1.  
.
CANDLE (  
)
Select this to take scene without losing  
candle mood.  
SPOT METER (Flexible  
spot meter)  
SUNRISE&SUNSET* (  
)
You can adjust and fix the exposure to the  
subject, so that it is recorded in suitable  
brightness even when there is strong  
contrast between the subject and the  
background, such as subjects in the  
spotlight on stage.  
Select this to reproduce the atmosphere of  
scenes such as sunsets or sunrises.  
FIREWORKS* (  
)
Select this to take spectacular shots of  
fireworks.  
1 Touch the point where you want to fix and  
adjust the exposure on the screen.  
76  
                   
b Notes  
LANDSCAPE* (  
)
• The [WHITE BAL. ] setting is cleared when  
you set [SCENE SELECTION].  
Select to shoot distant subjects clearly.  
This setting also prevents your camcorder  
from focusing on glass or metal mesh in  
windows that comes in between the  
camcorder and the subject.  
WHITE BAL. (White  
balance)  
You can adjust the color balance to the  
brightness of the recording environment.  
PORTRAIT (  
)
B AUTO  
The white balance is adjusted  
automatically.  
OUTDOOR (  
)
Select to bring out the subject such as  
people or flowers while creating a soft  
background.  
The white balance is adjusted to be  
appropriate for the following recording  
conditions:  
SPOTLIGHT** (  
)
– Outdoors  
– Night views, neon signs and fireworks  
– Sunrise or sunset  
– Under daylight fluorescent lamps  
Select to prevent people's faces from  
appearing excessively white when subjects  
are lit by strong light.  
INDOOR (n)  
The white balance is adjusted to be  
appropriate for the following recording  
conditions:  
SPORTS** (Sports lesson) (  
)
– Indoors  
– At party scenes or studios where the lighting  
conditions change quickly  
Selecttominimizeshakewhenshootingfast  
moving subjects.  
– Under video lamps in a studio, or under  
sodium lamps or incandescent-like color  
lamps  
BEACH** (  
)
ONE PUSH (  
)
The white balance will be adjusted  
according to the ambient light.  
1 Touch [ONE PUSH].  
Select to take the vivid blue of the ocean or  
a lake.  
2 Frame a white object such as a piece of  
paper, to fill the screen under the same  
lighting conditions as you will shoot  
the subject.  
SNOW** (  
)
3 Touch [  
].  
flashes quickly. When the white  
balance has been adjusted and stored in  
the memory, the indicator stops  
flashing.  
Select to take bright pictures of a white  
landscape.  
* Your camcorder is set to focus only on distant  
subjects.  
**Your camcorder is set not to focus on nearby  
subjects.  
Continued ,  
77  
                     
Functions set in the OPTION MENU (Continued)  
b Notes  
to [ON] while the NIGHTSHOT PLUS  
switch (p. 37) is also set to ON.  
appears on the screen.  
• Set [WHITE BAL. ] to [AUTO] or adjust the  
color in [ONE PUSH] under white or cool white  
fluorescent lamps.  
To return to the normal setting, set [S.  
NIGHTSHOT PLS] to [OFF].  
• While  
is flashing quickly during [ONE  
PUSH] setting, continue to frame a white object  
until  
stops flashing.  
flashes slowly if [ONE PUSH] could not  
b Notes  
• Do not use [S. NIGHTSHOT PLS] in bright  
places. This may cause a malfunction.  
• Do not cover the infrared port with your fingers  
or other objects (p. 112).  
• Adjust the focus manually ([FOCUS], p. 75)  
when it is hard to focus automatically.  
be set.  
• When [ONE PUSH] was selected, if  
keeps  
, set [WHITE BAL.  
flashing after touching  
] to [AUTO].  
• If you set [WHITE BAL. ], [SCENE  
SELECTION] is automatically set to [AUTO].  
• The shutter speed of your camcorder changes  
depending on the brightness, which may result  
in a slowdown of the motion of the image.  
z Tips  
• If you change the battery pack with [AUTO]  
selected, or take your camcorder outdoors after  
inside use (or vice versa), select [AUTO] and  
aim your camcorder at a nearby white object for  
about 10 seconds for better color balance  
adjustment.  
• If you change the [SCENE SELECTION]  
settings or move your camcorder outdoors  
during white balance setting with [ONE PUSH],  
you need to repeat the [ONE PUSH] operation.  
FADER  
You can record a transition with the  
following effects adding to the interval  
between scenes.  
1 Select the desired effect in [STBY] (during  
fading in) or [REC] (during fading out)  
mode, then touch  
2 Press START/STOP.  
The fader indicator stops flashing and  
disappears when the fade is complete.  
.
COLOR SLOW SHTR  
(Color Slow Shutter)  
When you set [COLOR SLOW SHTR] to  
[ON], you can record an image brighter in  
color even in dark places.  
To cancel the fader before starting the  
operation, touch [OFF] in step 1.  
If you press START/STOP, the setting is  
canceled.  
appears on the screen.  
To cancel [COLOR SLOW SHTR], touch  
[OFF].  
STBY  
REC  
b Notes  
Fading out  
Fading in  
• Adjust the focus manually ([FOCUS], p. 75)  
when it is hard to focus automatically.  
• The shutter speed of your camcorder changes  
depending on the brightness, which may result  
in a slowdown of the motion of the image.  
WHITE FADER  
BLACK FADER  
S. NIGHTSHOT PLS  
(Super NightShot plus)  
The image will be recorded at a maximum  
of 16 times the sensitivity of NightShot plus  
recording if you set [S. NIGHTSHOT PLS]  
78  
               
Press PHOTO to record still images when  
[SELF-TIMER] is set to [ON] and  
appears.  
To cancel the count down, touch [RESET].  
To cancel the self-timer, select [OFF].  
D.EFFECT (Digital effect)  
When [OLD MOVIE] is selected,  
appears on the screen and you can record  
with an old movie-type atmosphere to your  
movies.  
z Tips  
To cancel [D.EFFECT], touch [OFF].  
• You can also operate by pressing PHOTO on  
the Remote Commander (p. 114) (DCR-  
DVD308/DVD708).  
PICT.EFFECT (Picture  
effect)  
FLASH MODE (DCR-  
DVD308/DVD708)  
You can add special effects to an image  
during recording or playback.  
appears.  
You can set this function when you use an  
external flash (optional) that is compatible  
with your camcorder.  
Attach the external flash to the Active  
Interface Shoe (p. 112).  
B OFF  
Does not use [PICT.EFFECT] setting.  
SEPIA  
Images appear in sepia.  
B ON (  
)
B&W  
Flashes every time.  
Images appear in black and white.  
AUTO  
PASTEL  
Flashes automatically.  
Images appear as a pale pastel drawing.  
MICREF LEVEL  
You can select the microphone level for  
recording sound.  
Select [LOW] when you want to record  
exciting and powerful sound in a concert  
hall, etc.  
B NORMAL  
Records various surround sounds,  
converting them into the certain level.  
LOW (  
)
Records surround sound faithfully. This  
setting is not suitable for recording  
conversations.  
SELF-TIMER  
The self-timer records a still image about  
10 seconds after being set.  
79  
                           
Using a Computer  
What you can do with Windows computer  
When you install the “Picture Motion  
Browser” on a Windows computer from the  
About “First Step Guide”  
supplied CD-ROM, you can enjoy the  
The “First Step Guide” is an instruction  
following operations.  
manual you can refer to on your computer.  
This describes basic operations, from initial  
hookup of your camcorder and computer  
z Tips  
• See page 84 when you use a Macintosh  
and making settings, to general operation  
computer.  
the first time you use the software “Picture  
Motion Browser” stored on the CD-ROM  
(supplied).  
Guide”” (p. 81), start the “First Step  
Guide”, then follow the instructions.  
About the help function of the  
software  
The Help guide explains all the functions of  
all the software applications. Refer to the  
Help guide for further detailed operations  
after reading the “First Step Guide”  
thoroughly.  
To display the Help guide, click the  
mark on the screen.  
Main functions  
x Importing movies taken with your  
System requirements  
camcorder  
When using “Picture Motion Browser”  
x Viewing movies imported to a  
computer  
OS: Microsoft Windows 2000 Professional,  
Windows XP Home Edition, Windows XP  
Professional or Windows XP Media Center  
Edition  
Standard installation is required.  
Operation is not assured if the above OS  
has been upgraded or in a multi-boot  
environment.  
You can manage movies and still images  
by date and time of shooting, and select  
movies or still images you want to view as  
thumbnails. These thumbnails can be  
enlarged and played in a slide show.  
x Editing images imported to a  
computer  
CPU:Intel Pentium III 1 GHz or faster.  
Application: DirectX 9.0c or later (This  
product is based on DirectX technology. It  
is necessary to have DirectX installed.)  
Sound system: Direct Sound compatible  
sound card  
x Creating an original DVD  
You can create an original DVD from  
image data imported from your camcorder.  
x Copying a disc  
Memory: 256 MB or more  
t Video Disc Copier  
You can copy all the images on a disc  
taken with your camcorder.  
80  
               
Installing the “First  
Step Guide” and  
software  
Hard disk:  
Disc volume required for installation:  
Approximately 600 MB (5 GB or more  
may be necessary when creating DVD  
videos.)  
Display: DirectX 7 or later-compatible video  
card, Minimum 1024 × 768 dots, High  
Color (16 bit color)  
Others: USB port (this must be provided  
as standard, Hi-Speed USB (USB 2.0  
compatible) is recommended), Disc drive  
that can burn DVDs (CD-ROM drive  
required for software installation)  
You need to install the “First Step Guide”  
and software to your Windows computer  
before connecting your camcorder  
to the computer. The installation is  
required only for the first time.  
Contents to be installed and procedures  
may differ depending on your OS.  
z Tips  
• See page 84 when you use a Macintosh  
computer.  
When playing still images recorded  
on a “Memory Stick Duo” on a  
computer  
Installing the “First Step Guide”  
1
2
Confirm that your camcorder is  
not connected to the computer.  
OS: Microsoft Windows 2000 Professional,  
Windows XP Home Edition, Windows XP  
Professional or Windows XP Media Center  
Edition  
Standard installation is required.  
Operation is not assured if the above OS  
has been upgraded.  
CPU: MMX Pentium 200 MHz or faster  
Others: USB port (this must be provided  
as standard)  
Turn on the computer.  
b Notes  
• Log on as Administrators for installation.  
• Close all applications running on the  
computer before installing the software.  
b Note  
• Operations are not guaranteed on all the  
recommended environments.  
For example, other open or background  
applications running on currently may limit  
product performance.  
3
Place the supplied CD-ROM in the  
disc drive of your computer.  
The installation screen appears.  
z Tips  
• If your computer has a Memory Stick slot, insert  
the “Memory Stick Duo” on which still images  
are recorded into the Memory Stick Duo  
Adaptor (optional), then insert it into the  
Memory Stick slot on your computer to copy  
still images to the computer.  
• When using a “Memory Stick PRO Duo” and  
your computer is not compatible with it, connect  
your camcorder with the USB cable instead of  
using the Memory Stick slot on the computer.  
If the screen does not appear  
1 Click [Start], then click [My  
Computer]. (For Windows 2000,  
double-click [My Computer].)  
2 Double-click [SONYPICTUTIL (E:)]  
(CD-ROM) (disc drive).*  
* Drive names (such as (E:)) may vary  
depending on the computer.  
Continued ,  
81  
     
Installing the “First Step Guide” and software (Continued)  
4
5
Click [FirstStepGuide].  
4
5
6
Check your area and country/  
region, then click [Next].  
The software is set up for your selected  
country/region.  
Select the desired language and  
the model name of your  
camcorder from the pull-down  
menu.  
Read [License Agreement], select  
[I accept the terms of the license  
agreement] when you agree, then  
click [Next].  
Connect your camcorder to your  
computer via a USB cable, then  
click [Next] on the connection  
confirmation screen.  
6
Click [FirstStepGuide(HTML)].  
Installation starts.  
When [Save is complete] appears, click  
[OK] to finish the installation.  
To install the “First Step Guide” in  
PDF  
In step 6, click [FirstStepGuide(PDF)].  
b Notes  
• Even if a screen prompting you to restart  
your computer appears, you do not need to  
restart it at this time. Restart your computer  
after completing the installation..  
To install the software “Adobe  
Reader” to display the PDF file  
In step 6, click [Adobe(R) Reader(R)].  
7
Follow the on-screen instructions  
to install the software.  
Installing the software  
Depending on the computer, you may  
need to install third party software  
(shown below). If the installation screen  
appears, follow the instructions to  
install the required software.  
1
Perform steps 1 to 3 in “Installing  
2
3
Click [Install].  
x Sonic UDF Reader  
Software required to recognize a DVD-RW  
(VR mode)  
Select the language for the  
application to be installed, then  
click [Next].  
82  
 
Viewing “First Step  
Guide”  
x Windows Media Format 9 Series  
Runtime (Windows 2000 only)  
Software required to create a DVD  
z Tips  
• See page 84 when you use a Macintosh  
computer.  
To view “First Step Guide” on your  
computer, Microsoft Internet Explorer  
Ver.6.0 or later is recommended.  
Double-click the shortcut of “First Step  
Guide” on the desktop.  
x Microsoft DirectX 9.0c  
Software required to handle movies  
Restart the computer if required to  
complete the installation.  
The short-cut icons, such as [  
(Picture Motion Browser), appear on the  
desktop.  
]
z Tips  
• You can also start this program by selecting  
[Start] t [Programs] ([All Programs] for  
Windows XP) t [Sony Picture Utility] t  
[First Step Guide] t folder with model name  
of your camcorder t HTML version of “First  
Step Guide.”  
• To view “First Step Guide” in HTML without  
installing, copy the desired language folder from  
the [FirstStepGuide] folder on the CD-ROM,  
and then double-click [Index.html].  
• Refer to the PDF version of “First Step Guide”  
in the following cases:  
– When printing the desired topics of “First  
Step Guide”  
8
Remove the CD-ROM from the  
disc drive of your computer.  
– When “First Step Guide” is not displayed  
correctly due to the browser setting even in  
recommended environment.  
– When the HTML version of “First Step  
Guide” cannot be installed.  
z Tips  
• Refer to the "First Step Guide" for how to  
remove the USB cable.  
After you install the software,  
a shortcut icon for the  
customers registration  
website is created on the  
desktop.  
• Once you register on the website, you  
can get secure and useful customer  
support.  
http://www.sony.net/registration/di/  
• For the information about Picture  
Motion Browser, visit the following  
URL:  
http://www.sony.net/support-disoft/  
83  
   
Using a Macintosh  
computer  
You can copy the still images from the  
“Memory Stick Duo” to the Macintosh.  
Install “First Step Guide” in the supplied  
CD-ROM.  
b Notes  
• The supplied software “Picture Motion  
Browser” does not operate on Mac OS.  
• Refer to “First Step Guide” for the details on  
connecting your camcorder to the computer and  
copying the still images.  
System requirements  
To copy still images from a “Memory  
Stick Duo”  
OS: Mac OS 9.1/9.2 or Mac OS X (v10.1/  
v10.2/v10.3/v10.4).  
Others: USB port (this must be provided  
as standard)  
About “First Step Guide”  
The “First Step Guide” is an instruction  
manual you can refer to on your computer.  
This describes basic operations, from initial  
hookup of your camcorder and computer  
and making setting.  
Referring to “Installing the “First Step  
Guide,”” start the “First Step Guide,” then  
follow the instructions.  
Installing “First Step Guide”  
Copy “FirstStepGuide(PDF),” stored in the  
desired language in the [FirstStepGuide]  
folder, to your computer.  
Viewing “First Step Guide”  
Double-click “FirstStepGuide(PDF).”  
If no software for viewing PDF files is  
installed on your computer, you can  
download Adobe Reader from the  
following website:  
http://www.adobe.com/  
84  
     
Troubleshooting  
Troubleshooting  
If you run into any problems using your  
camcorder, use the following table to  
troubleshoot the problem. If the problem  
persists, disconnect the power source and  
contact your Sony dealer.  
Buttons do not work.  
• During Easy Handycam operation, the  
following buttons/functions are not  
available.  
– BACK LIGHT button (p.37)  
– Playback zoom (p.41)  
– Turning the LCD backlight on and off  
(pressing and holding the DISP BATT/  
INFO button for a few seconds) (p.27)  
• Overall operations/Easy Handycam operation/  
Remote Commander ...................................... 85  
• Batteries/Power sources ................................ 86  
• LCD screen/viewfinder ................................. 87  
• Discs/“Memory Stick Duo” .......................... 87  
• Recording ...................................................... 88  
• Playing back on your camcorder .................. 90  
• Playing back a disc on other devices ............ 91  
• Editing movies on the disc ............................ 91  
The  
(OPTION) button is not  
displayed.  
• The OPTION MENU cannot be used during  
Easy Handycam operation.  
• Dubbing/Editing/Connecting to other devices ..  
....................................................................... 92  
• Connecting to a computer ............................. 92  
• Functions that cannot be used simultaneously  
....................................................................... 92  
The menu settings have been  
changed.  
• Most menu items automatically return to  
their default settings during Easy Handycam  
operation.  
• The following menu items are fixed during  
Easy Handycam operation:  
Overall operations/Easy  
Handycam operation/Remote  
Commander  
– Movie recording mode: [SP]  
The power does not turn on.  
– [  
QUALITY] for still images: [FINE]  
– [DATA CODE]: [DATE/TIME]  
– Recording format for DVD-RW: [VIDEO]  
• Attach a charged battery pack to the  
camcorder (p. 22).  
• The following menu items return to their  
default settings if the POWER switch is set  
to OFF (CHG) for more than 12 hours:  
– [FOCUS]  
– [SPOT FOCUS]  
– [EXPOSURE]  
– [SPOT METER]  
– [SCENE SELECTION]  
– [WHITE BAL. ]  
– [MICREF LEVEL]  
• Connect the plug of the AC Adaptor to the  
wall outlet (p. 22).  
The camcorder does not operate  
even when the power is set to on.  
• It takes a few seconds for your camcorder to  
be ready to shoot after the power is turned  
on. This is not a malfunction.  
• Disconnect the AC Adaptor from the wall  
outlet or remove the battery pack, then  
reconnect it after about 1 minute. If the  
functions still do not work, press the RESET  
button (p. 113) using a sharp-pointed object.  
(If you press the RESET button, all settings,  
including the clock setting, are reset.)  
• The temperature of your camcorder is  
extremely high. Turn off your camcorder  
and leave it for a while in a cool place.  
Continued ,  
85  
         
Troubleshooting (Continued)  
Even if you press EASY, menu  
settings do not switch to their  
defaults automatically.  
The supplied Remote Commander  
does not function (DCR-DVD308/  
DVD708).  
• Following menu settings remain as they  
were set even during Easy Handycam  
operation.  
– [FILE NO. ]  
– [VOLUME]  
• Set [REMOTE CTRL] to [ON] (p. 72).  
• Insert a battery into the battery holder with  
the +/– polarities correctly matching the +/–  
marks (p. 114).  
• Remove any obstructions between the  
Remote Commander and the remote sensor.  
• Point the remote sensor away from strong  
light sources such as direct sunlight or  
overhead lighting. Otherwise, the Remote  
Commander may not function properly.  
– [TV TYPE]  
– [  
DISPLAY]  
– [BEEP]  
– [SUB-T DATE]  
– [CLOCK SET]  
– [AREA SET]  
– [DST SET]/[SUMMERTIME]  
– [WIDE SELECT] *  
– [DEMO MODE]  
– [FLASH MODE] **  
Another DVD device malfunctions  
when you use the supplied Remote  
Commander (DCR-DVD308/DVD708).  
– [  
LANGUAGE SET]  
• Select a commander mode other than DVD 2  
for your DVD device, or cover the sensor of  
your DVD device with black paper.  
* DCR-DVD108/DVD608  
**DCR-DVD308/DVD708  
Your camcorder vibrates.  
Batteries/Power sources  
• Vibration occurs depending on the condition  
of the disc. This is not a malfunction.  
The power abruptly turns off.  
• When approximately 5 minutes have elapsed  
while you do not operate your camcorder,  
the camcorder is automatically turned off  
(A.SHUT OFF). Change the setting of  
[A.SHUT OFF] (p. 72), or turn on the power  
again, or use the AC Adaptor.  
A vibration is felt in your hand or a  
faint sound is heard during  
operation.  
• This is not a malfunction.  
• Charge the battery pack (p. 22).  
A motor sound is heard in the  
camcorder when the disc cover is  
closed without a disc.  
The CHG (charge) lamp does not  
light while the battery pack is being  
charged.  
• Your camcorder is trying to recognize the  
disc. This is not a malfunction.  
• Turn the POWER switch to OFF (CHG)  
(p. 22).  
• Attach the battery pack to the camcorder  
correctly (p. 22).  
• Connect the power cord to the wall outlet  
properly.  
Your camcorder gets warm.  
• This is because the power has been turned on  
for a long time. This is not a malfunction.  
Turn off your camcorder and leave it for a  
while in a cool place.  
• The battery charge is completed (p. 22).  
86  
 
The CHG (charge) lamp flashes while  
the battery pack is being charged.  
Menu items are grayed out.  
• You cannot select grayed items in the current  
recording/playback status.  
• Some functions cannot be used  
simultaneously (p. 92).  
• Attach the battery pack to the camcorder  
correctly (p. 22). If the problem persists,  
disconnect the AC Adaptor from the wall  
outlet and contact your Sony dealer. The  
battery pack may be damaged.  
The image in the viewfinder is not  
clear.  
The remaining battery time indicator  
does not indicate the correct time.  
• Move the viewfinder lens adjustment lever  
until the image appears clearly (p. 27).  
• The temperature of the environment is too  
high or too low. This is not a malfunction.  
• The battery pack has not been charged  
enough. Fully charge the battery again. If the  
problem persists, replace the battery pack  
with a new one (p. 22).  
The image in the viewfinder has  
disappeared.  
• Close the LCD panel. No image is displayed  
in the viewfinder when the LCD panel is  
open (p. 27).  
• The indicated time may not be correct  
depending on the environment of use.  
A dotted line appears on the LCD  
screen.  
The battery pack is quickly  
discharged.  
• This is not malfunction and does not affect  
recorded images.  
• The temperature of the environment is too  
high or low. This is not a malfunction.  
• The battery pack has not been charged  
enough. Fully charge the battery again. If the  
problem persists, replace the battery pack  
with a new one (p. 22).  
Discs/“Memory Stick Duo”  
The disc cannot be removed.  
• Make sure the power source (battery pack or  
AC Adaptor) is connected correctly (p. 22).  
LCD screen/viewfinder  
• The disc is damaged or is dirty with  
fingerprints, etc. In this case, it may take up  
to 10 minutes to remove the disc.  
• The temperature of your camcorder is  
extremely high. Turn off your camcorder  
and leave it for a while in a cool place.  
• Finalizing is interrupted by turning off your  
camcorder. Turn on your camcorder and  
remove the disc after finalizing is completed  
(p. 46).  
The buttons do not appear on the  
touch panel.  
• Touch the LCD screen lightly.  
• Press DISP/BATT INFO on your camcorder  
(or DISPLAY on the Remote Commander  
for DCR-DVD308/DVD708) (p. 27).  
The buttons on the touch panel do  
not work correctly or do not work at  
all.  
Images cannot be deleted.  
• The maximum number of images that you  
can delete on the index screen at one time is  
100.  
• Adjust the touch panel ([CALIBRATION])  
(p. 105).  
• Images cannot be deleted depending on the  
type and recording format of a disc (p. 15,  
48).  
Continued ,  
87  
   
Troubleshooting (Continued)  
Recording  
Remaining disc space indicator is  
not displayed.  
Refer also to “Discs/"Memory Stick Duo"”  
• Set [  
REMAINING] to [ON] to always  
display the remaining disc space indicator  
(p. 65).  
Pressing START/STOP does not  
record movies on the disc.  
The indicators of the disc type and  
the recording format on the LCD  
screen are grayed out.  
• The playback screen is displayed. Set your  
camcorder to recording standby (p. 35).  
• Your camcorder is recording the scene you  
have just shot on the disc.  
• The disc has run out of space. Use a new disc  
or format the disc (DVD-RW/DVD+RW  
only, p. 59). Or delete the unnecessary  
images (p. 48).  
• When you are using one of the following  
discs after finalizing it, make the disc to be  
able to record additional scenes (p.60). Or  
use a new disc.  
– DVD-RW (VIDEO mode)  
– DVD+RW  
• The disc may have been created other than  
your camcorder. You can play back with  
your camcorder, but you cannot record  
additional scenes.  
You cannot operate functions using  
the “Memory Stick Duo.”  
• If you use a “Memory Stick Duo” formatted  
on a computer, format it again on your  
camcorder (p. 60).  
• The temperature of your camcorder is  
extremely high. Turn off your camcorder  
and leave it for a while in a cool place.  
• Moisture condensation has occurred with the  
disc. Turn off your camcorder and leave it  
for about 1 hour in a cool place (p. 105).  
You cannot delete or format the  
“Memory Stick Duo.”  
• The maximum number of images that you  
can delete on the index screen at one time is  
100.  
• You cannot delete still images that have  
write-protection set by another device.  
You cannot record a still image.  
• The playback screen is displayed. Set your  
camcorder to recording standby (p. 35).  
• The “Memory Stick Duo” has run out of  
space. Use a new “Memory Stick Duo” or  
format the “Memory Stick Duo” (p. 60). Or  
delete the unnecessary images (p. 49).  
Data file name is incorrect or  
flashing  
• The file may be corrupted.  
• The file format may not be supported by  
your camcorder. Use the supported file  
format (p. 101).  
• You cannot record a still image on a disc on  
your camcorder.  
The ACCESS lamp lights up even  
when you stop recording.  
• Your camcorder is recording the scene you  
have just shot on the disc.  
88  
 
The recording angle looks different  
(DCR-DVD308/DVD708).  
[STEADYSHOT] does not function.  
• Set [STEADYSHOT] to [ON] (p. 65).  
• The recording angle may look different  
depending on the mode of your camcorder.  
This is not a malfunction.  
• [STEADYSHOT] may not be able to  
compensate for excessive vibrations.  
The BACK LIGHT function does not  
function.  
The actual recording time for movie  
is less than the expected  
approximate recording time of a  
disc.  
• The BACK LIGHT function cannot be used  
during Easy Handycam operation.  
• Depending on an object, such as a fast  
moving object, the time available for  
recording may shorten (p. 14).  
Tiny spots in white, red, blue, or  
green appear on the screen.  
• The spots appear when you are recording  
with [S. NIGHTSHOT PLS] or [COLOR  
SLOW SHTR]. This is not a malfunction.  
The recording stops.  
• The temperature of your camcorder is  
extremely high. Turn off your camcorder  
and leave it for a while in a cool place.  
• Moisture condensation has occurred with the  
disc. Turn off your camcorder and leave it  
about 1 hour in a cool place (p. 105).  
The color of the image is not  
correctly displayed.  
• Set the NIGHTSHOT PLUS switch to OFF  
(p. 37).  
The screen image is bright, and the  
subject does not appear on the  
screen.  
There is a time difference between  
the point where you press START/  
STOP and the point that the  
recorded movie starts/stops.  
• Set the NIGHTSHOT PLUS switch to OFF  
(p. 37).  
• On your camcorder, there may be a slight  
time difference between the point where you  
press START/STOP and the actual point that  
recording movie starts/stops. This is not a  
malfunction.  
The screen image is dark, and the  
subject does not appear on the  
screen (DCR-DVD308/DVD708).  
• Press and hold DISP/BATT INFO for a few  
seconds to turn on the backlight (DCR-  
DVD308/DVD708) (p. 27).  
The movie aspect ratio (16:9/4:3)  
cannot be changed. (DCR-DVD308/  
DVD708)  
• You cannot change the movie aspect ratio if  
your disc is DVD+RW.  
Undesirable flicker occurs.  
• This occurs when recording images under a  
fluorescent lamp, sodium lamp, or mercury  
lamp. This is not malfunction.  
The auto focus does not function.  
• Set [FOCUS] to [AUTO] (p. 75).  
• The recording conditions are not suitable for  
auto focus. Adjust the focus manually  
(p. 75).  
Continued ,  
89  
   
Troubleshooting (Continued)  
Playing back on your camcorder  
A vertical band appears when  
recording candlelight or electric light  
in the dark.  
You cannot play back a disc.  
• Turn the POWER switch to turn on your  
• This occurs when the contrast between the  
subject and the background is too high.  
This is not a malfunction.  
camcorder and press  
(VIEW IMAGES).  
• On the HOME MENU, touch  
(VIEW  
IMAGES), then [VISUAL INDEX].  
• Check out the disc compatibility (p. 14).  
• Insert a disc with the recording side facing  
your camcorder (p.28).  
• The disc that was recorded, formatted, of  
finalized on other devices may not be played  
back on your camcorder.  
A vertical white line may appear on  
an image taken in bright light.  
• This phenomenon is called the smear effect.  
This is not a malfunction.  
Black bands appear when you  
record a TV screen or computer  
screen.  
The playback image is distorted.  
• Clean the disc using a soft cloth (p. 101).  
• Set [STEADYSHOT] to [OFF] (p. 65).  
Still images stored on a “Memory  
Stick Duo” cannot be played back.  
[S. NIGHTSHOT PLS] cannot be  
operated.  
• Still images cannot be played back if you  
have modified files or folders, or have edited  
the data on a computer. (The file name  
flashes in that case.) This is not a  
malfunction (p. 102).  
• Still images recorded on other devices may  
not be played back. This is not a malfunction  
(p. 102).  
• Set the NIGHTSHOT PLUS switch to ON  
(p. 37).  
[COLOR SLOW SHTR] does not  
operate correctly.  
• [COLOR SLOW SHTR] may not operate  
correctly in total darkness. Use NightShot  
plus or [S. NIGHTSHOT PLS].  
” is indicated on an image in the  
VISUAL INDEX screen.  
You cannot adjust [LCD BL LEVEL].  
• Loading of the data may have failed. It may  
be indicated correctly when you turn off the  
power and then turn it on again, or repeat  
removing and inserting the “Memory Stick  
Duo” a couple of times.  
• You cannot adjust [LCD BL LEVEL] when:  
– The LCD panel is closed on your  
camcorder with the LCD screen facing out.  
– The power is supplied from the AC  
Adaptor.  
• This may appear on still images recorded on  
other devices, edited on a computer, etc.  
You cannot use [WIDE SELECT]  
(DCR-DVD108/DVD608).  
• You cannot use [WIDE SELECT] if your  
disc is DVD+RW.  
90  
     
No sound or only a quiet sound is  
heard when playing back a disc.  
Playback does not move to the  
previous scene when you press  
..  
• Turn up the volume (p. 40).  
• If playback crosses 2 titles made  
automatically by your camcorder when .  
is pressed, playback may not move to the  
previous scene. Select the desired scene  
from the menu screen. Refer to the  
instruction manual of the playback device  
for further information.  
• Sound is not output when the LCD screen is  
closed. Open the LCD screen.  
• When you record sound with [MICREF  
LEVEL] (p. 79) set to [LOW], the recorded  
sound may be difficult to hear.  
Playing back a disc on other  
devices  
Editing movies on the disc  
You cannot play back the disc, or the  
disc is not recognized.  
Unable to edit.  
• Your disc may not be configured for editing  
data (p. 15).  
• There are no images recorded on the disc.  
• Clean the disc using a soft cloth (p. 101).  
• Finalize the disc (p. 44).  
• A disc recorded in VR mode cannot be  
played back on a device that does not  
support VR mode. Check the compatibility  
in the instruction manual of the playback  
device.  
• Unable to edit because of the condition of  
the image.  
• You cannot edit an image protected on  
another device.  
• You cannot copy or move the images  
between a disc and a “Memory Stick Duo.”  
The playback image is distorted.  
• Clean the disc using a soft cloth (p. 101).  
Scenes cannot be added in the  
Playlist.  
” is indicated on an image in the  
• The disc is full, or the added scenes exceed  
999. Delete unnecessary scenes (p. 52).  
DVD menu.  
• You cannot add still images in the Playlist.  
• Loading of the data may have failed when  
the disc was finalized. For the following  
discs, make the disc capable of additional  
recording (p. 60), then remake the DVD  
menu by finalizing the disc again (p. 47).  
The DVD menu may be displayed correctly.  
– DVD-RW (VIDEO mode)  
A movie cannot be divided.  
• A movie that is too short cannot be divided.  
• A movie protected on another device cannot  
be divided.  
– DVD+RW  
A scene cannot be deleted.  
Playback freezes for an instant  
between the scenes.  
• Your disc may not be configured for deleting  
data (p. 15).  
• You cannot delete movie during the Easy  
Handycam operation.  
• A scene protected on another device cannot  
be deleted.  
• The image may freeze for an instant between  
scenes depending on the device being used.  
This is not a malfunction.  
• In case of a DVD+R DL, the image may  
freeze for an instant when the recording  
layer changes. This is not a malfunction.  
Continued ,  
91  
   
Troubleshooting (Continued)  
Unable to copy the images from a  
disc to a “Memory Stick Duo.”  
You cannot dub correctly.  
• The A/V connecting cable is not connected  
properly. Make sure that the A/V connecting  
cable is connected to the proper jack, i.e. to  
the input jack of another device for dubbing  
a image from your camcorder (p. 54).  
• You cannot copy a movie from a disc to a  
“Memory Stick Duo” as a still image during  
playback on your camcorder.  
Unable to finalize.  
Connecting to a computer  
• Battery is running out during finalizing. Use  
the AC Adaptor.  
• The disc has already been finalized. In the  
case of following discs, follow the required  
procedure to record additional material  
(p. 60):  
When using the movies on a disc, a  
computer does not recognize your  
camcorder.  
• Install Picture Motion Browser (p. 82).  
• Disconnect the USB device other than the  
keyboard, the mouse, and the camcorder  
from the computer.  
– DVD-RW (VIDEO mode)  
– DVD+RW  
• Disconnect the cable from the computer and  
camcorder, restart the computer, then  
connect them again correctly.  
Unable to [UNFINALIZE].  
• [UNFINALIZE] is not available for the  
following types of disc:  
– DVD-RW (VR mode)  
– DVD+RW  
– DVD-R  
– DVD+R DL  
Cannot use the supplied software,  
Picture Motion Browser, on the  
Macintosh computer.  
• You cannot use Picture Motion Browser on a  
Macintosh.  
You cannot edit or record additional  
material on a disc using other  
devices.  
Functions that cannot be used  
simultaneously  
• The following list shows examples of  
unworkable combinations of functions and  
menu items.  
• You may not be able to edit a disc recorded  
on your camcorder using other devices.  
Dubbing/Editing/Connecting to  
other devices  
Because of following  
Cannot use  
settings  
You cannot hear the sound.  
BACK LIGHT  
[SPOT METER],  
[FIREWORKS],  
[MANUAL] in  
[EXPOSURE]  
• When you are using the S VIDEO plug,  
make sure the red and white plugs of the A/V  
connecting cable are connected (p. 42).  
WIDE SELECT* [OLD MOVIE]  
The aspect ratio of the playback is  
not correct when connecting your  
camcorder to the TV.  
[SCENE  
SELECTION]  
NightShot plus,  
[S. NIGHTSHOT PLS],  
[COLOR SLOW  
SHTR],  
[OLD MOVIE], [TELE  
MACRO]  
• Set [TV TYPE] depending on your TV  
(p. 42, 70).  
[SPOT FOCUS] [SCENE SELECTION]  
92  
           
Because of following  
settings  
Cannot use  
[SPOT METER] NightShot plus,  
[S. NIGHTSHOT PLS]  
NightShot plus,  
[S. NIGHTSHOT PLS]  
[WHITE BAL. ] NightShot plus,  
[S. NIGHTSHOT PLS]  
[EXPOSURE]  
[S.NIGHTSHOT [FADER], [D.EFFECT]  
PLS]  
[COLOR SLOW [FADER],  
SHTR]  
[D.EFFECT], [SCENE  
SELECTION]  
[FADER]  
[S. NIGHTSHOT PLS],  
[COLOR SLOW  
SHTR], [D.EFFECT],  
[CANDLE],  
[FIREWORKS]  
[D.EFFECT]  
[S. NIGHTSHOT PLS],  
[COLOR SLOW  
SHTR], [FADER]  
[OLD MOVIE]  
[SCENE SELECTION],  
[PICT.EFFECT]  
[PICT.EFFECT] [OLD MOVIE]  
[TELE MACRO] [SCENE SELECTION]  
[AUTO SLW  
SHUTTR]  
[S. NIGHTSHOT PLS],  
[SCENE SELECTION],  
[COLOR SLOW  
SHTR], [D.EFFECT]  
[WIDE  
[OLD MOVIE]  
SELECT]**  
* DCR-DVD308/DVD708  
**DCR-DVD108/DVD608  
93  
                   
Warning indicators and messages  
E:20:ss / E:31:ss / E:61:ss /  
E:62:ss / E:91:ss / E:94:ss  
• A malfunction that you cannot service  
has occurred. Contact your Sony dealer  
or local authorized Sony service facility.  
Inform them of the 5-digit code, which  
starts from “E.”  
Self-diagnosis display/Warning  
indicators  
If indicators appear on the LCD screen or in  
the viewfinder, check the following.  
Some symptoms you can fix by yourself. If  
theproblem persistsevenafter you havetried  
a couple of times, contact your Sony dealer  
or local authorized Sony service facility.  
101-0001 (Warning indicator  
pertaining to files)  
Slow flashing  
C:04:00  
• The file is damaged.  
• The file is unreadable.  
(Warning indicator pertaining to  
discs)  
C:(or E:) ss:ss (Self-diagnosis  
display)  
Slow flashing  
• A disc is not inserted.*  
• Less than 5 minutes remains for  
recording movies.  
• A disc that cannot be read or written is  
inserted, such as the single-sided disc  
inserted inside out.  
C:04:ss  
• The battery pack is not an  
InfoLITHIUM” battery pack. Use an  
InfoLITHIUM” battery pack (p.103).  
• Connect the DC plug of the AC Adaptor  
to the DC IN jack of your camcorder  
securely (p.22).  
Fast flashing  
• An unrecognizable disc is inserted.*  
• A finalized DVD-RW (VIDEO mode)/  
DVD+RW is inserted into your  
camcorder during recording standby.  
• The disc is fully recorded.*  
C:13:ss  
• The disc is faulty. Use a compatible disc  
with your camcorder (p.14).  
• The disc is dirty or has scratches on it.  
Cleanthediscwiththe suppliedcleaning  
cloth (p.101).  
• The disc recorded in the different TV  
color system from your camcorder is  
C:32:ss  
inserted when  
(Movie) is selected.*  
• Symptoms that are not described above  
have occurred. Remove the disc and  
insert it again, then operate your  
camcorder again.  
Z (You need to remove the disc)*  
Fast flashing  
• Remove the power source. Reconnect it  
again and operate your camcorder again.  
• An unrecognizable disc is inserted.  
• The disc is fully recorded.  
• Turn on your camcorder again.  
• An error might have occurred with the  
disc drive in your camcorder.  
• A finalized disc is inserted.  
94  
     
E (Battery level warning)  
(Warning indicator pertaining to  
the flash)  
Slow flashing  
Fast flashing  
• The battery pack is nearly used up.  
• There is something wrong with the  
flash.  
• Depending on the operating,  
environment, or battery conditions, E  
may flash, even if there are  
approximately 20 minutes remaining.  
(Warning indicator pertaining to  
camera-shake warning)  
(High temperature warning)  
Slow flashing  
• The temperature of your camcorder is  
getting higher. Turn off your camcorder  
and leave it for a while in a cool place.  
• The amount of lights is not sufficient,  
so camera-shake easily occurs. Use the  
flash.  
• The camcorder is unsteady, so camera-  
shake easily occurs. Hold the  
camcorder steady with both hands and  
shoot the image. However, note that the  
camera-shake warning indicator does  
not disappear.  
Fast flashing*  
• The temperature of your camcorder is  
extremely high. Turn off your  
camcorder and leave it for a while in a  
cool place.  
* You hear a melody when the warning indicators  
appear on the screen (p. 69).  
(Warning indicator pertaining to  
“Memory Stick Duo”)  
Description of warning  
messages  
• No “Memory Stick Duo” is inserted  
(p. 29).  
If messages appear on the screen, follow the  
instructions.  
(Warning indicators pertaining to  
“Memory Stick Duo” formatting)*  
x Disc  
• The “Memory Stick Duo” is damaged.  
• The “Memory Stick Duo” is not  
formatted correctly (p. 60, 101).  
ZRecording on disc disabled.  
• A malfunction has occurred with the  
disc and the disc cannot be used.  
(Warning indicator pertaining to  
incompatible “Memory Stick Duo”)*  
Playback prohibited.  
• An incompatible “Memory Stick Duo”  
is inserted (p. 101).  
• You are trying to play back an  
incompatible disc with your camcorder.  
• You are trying to play back an image  
recorded with a copyright protection  
signal.  
- (Warning indicator pertaining  
to the write-protect of the “Memory  
Stick Duo”)*  
• The write-protect tab on the “Memory  
Stick Duo” is set to lock (p. 102).  
• Access to the “Memory Stick Duo” was  
restricted on another device.  
Continued ,  
95  
 
Warning indicators and messages (Continued)  
x PictBridge compliant printer  
Z Need to unfinalize disc.  
• To record on the finalized DVD-RW  
(VIDEO mode), unfinalize it (p. 60).  
Not connected to PictBridge  
compatible printer.  
• Switch off the printer and switch it on  
again, then disconnect the USB cable  
and reconnect it.  
Disc error. Remove disc.  
• Your camcorder cannot recognize the  
disc, because the disc is incompatible  
or has scratches.  
Cannot print. Check the printer.  
• Switch off the printer and switch it on  
again, then disconnect the USB cable  
and reconnect it.  
Z Disc error. Unsupported  
format.  
• The disc recorded in the different  
format code from your camcorder.  
Formatting the disc may enable you to  
use the disc on your camcorder (DVD-  
RW/DVD+RW only) (p.59).  
x Others  
No further selection is possible.  
• You can select up to 100 images only  
when:  
– deleting images  
x “Memory Stick Duo”  
– editing the playlist  
– printing still images  
Reinsert the Memory Stick.  
• Reinsert the “Memory Stick Duo” a  
few times. If even then the indicator  
flashes, the “Memory Stick Duo” could  
be damaged. Try with another  
“Memory Stick Duo.”  
Data protected.  
• The disc has been protected with  
another device.  
This Memory Stick is not  
formatted correctly.  
Cannot divide.  
• You cannot divided a movie that is  
extremely short.  
• Check the format, then format the  
"Memory Stick Duo" with your  
camcorder if necessary (p. 60, 101).  
Recovering data  
vibration.  
Avoid any  
Memory Stick folders are full.  
• Your camcorder tries to recover data  
automatically if the data writing was  
not performed properly.  
You cannot create folders exceeding  
999MSDCF. Youcannotcreateordelete  
created folders using your camcorder.  
You will have to format the “Memory  
Stick Duo” (p. 60), or delete them using  
your computer.  
Cannot recover data on disc.  
• Writing data to the disc has failed.  
Attempts were made to recover the  
data, but they were unsuccessful.  
96  
Please wait.  
• This is displayed if the disc removal  
process takes time. Turn on the  
camcorder and leave it for about 10  
minutes, preventing vibration.  
97  
Additional Information  
Using your camcorder abroad  
Power supply  
System  
Used in  
You can use your camcorder in any  
Bahama Islands, Bolivia,  
Canada, Central America,  
Chile, Colombia, Ecuador,  
Guyana, Jamaica, Japan, Korea,  
Mexico, Peru, Surinam, Taiwan,  
the Philippines, the U.S.A.,  
Venezuela, etc.  
countries/regions using the AC Adaptor  
supplied with your camcorder within the  
AC 100 V to 240 V, 50/60 Hz range. Use a  
commercially available AC plug adaptor  
[a], if necessary, depending on the design of  
the wall outlet [b].  
NTSC  
Australia, Austria, Belgium,  
China, Czech Republic,  
AC-L200/L200B  
[a]  
[b]  
Denmark, Finland, Germany,  
Holland, Hong Kong, Hungary,  
Italy, Kuwait, Malaysia, New  
Zealand, Norway, Poland,  
Portugal, Singapore, Slovak  
Republic, Spain, Sweden,  
Switzerland, Thailand, United  
Kingdom, etc.  
On TV color systems  
PAL  
Your camcorder is an NTSC-system-based  
camcorder. If you want to view the  
playback image on a TV, it must be an  
NTSC-system-based TV with an AUDIO/  
VIDEO input jack.  
PAL - M Brazil  
PAL - N Argentina, Paraguay, Uruguay.  
Bulgaria, France, Guiana, Iran,  
SECAM Iraq, Monaco, Russia, Ukraine,  
etc.  
98  
         
Setting to the local time  
You can easily set the clock to the local time by setting a time difference when using your  
camcorder abroad. Set  
SET]/[SUMMERTIME] on the HOME MENU (p. 71).  
(SETTINGS) t [CLOCK/ LANG] t [AREA SET] and [DST  
World time difference  
Time-zone  
differences  
Time-zone  
Area setting  
Area setting  
differences  
+11:00  
+12:00  
–12:00  
–11:00  
–10:00  
–09:00  
–08:00  
–07:00  
–06:00  
–05:00  
–04:00  
–03:30  
–03:00  
–02:00  
–01:00  
GMT  
Lisbon, London  
Berlin, Paris  
Solomon Is.  
+01:00  
+02:00  
+03:00  
+03:30  
+04:00  
+04:30  
+05:00  
+05:30  
+06:00  
+06:30  
+07:00  
+08:00  
+09:00  
+09:30  
+10:00  
Fiji, Wellington  
Eniwetok, Kwajalein  
Midway Is., Samoa  
Hawaii  
Helsinki, Cairo, Istanbul  
Moscow, Nairobi  
Tehran  
Abu Dhabi, Baku  
Kabul  
Alaska  
Los Angeles, Tijuana  
Denver, Arizona  
Chicago, Mexico City  
New York, Bogota  
Santiago  
Karachi, Islamabad  
Calcutta, New Delhi  
Almaty, Dhaka  
Rangoon  
Bangkok, Jakarta  
Hong Kong, Singapore, Beijing  
Seoul, Tokyo  
St. John’ s  
Brasilia, Montevideo  
Fernando de Noronha  
Azores, Cape Verde Is.  
Adelaide, Darwin  
Melbourne, Sydney  
99  
 
Maintenance and precautions  
About the Disc  
symbol  
See page 14 for the details of discs  
which you can use with your  
camcorder.  
Notes on use  
• Hold the disc by its edge while supporting  
the center hole lightly. Do not touch the  
recording side (the opposite of the printed  
side when using a single-sided disc).  
• Before shooting, be sure to remove dust  
and fingerprints from the disc with a soft  
cloth. Otherwise you may not be able to  
record or play normally in some situations  
using that disc.  
• When you set the disc in your camcorder,  
press firmly until it clicks. When the  
message [C:13:ss] appears on the LCD  
screen, open the disc cover and set the  
disc again.  
Place the  
outwards.  
Recording ismade on the rear side.  
symbol facing  
• Do not attach any adhesive material such  
as a sticker on the surface of a disc. If you  
do so, the disc may become unbalanced,  
and this may cause a malfunction of the  
disc or your camcorder.  
• When using a double-sided disc, take care  
not to smudge the surface with  
fingerprints.  
• When a double-sided disc is used in your  
camcorder, recording/playback are  
performed on that side only. You cannot  
switch to record on or play back the other  
side with the disc set to the camcorder.  
When recording/playback of one side is  
complete, remove the disc and turn it over  
to access the other side.  
Use of double-sided discs  
• Perform the following operations on each  
side of a double-sided disc:  
– Finalizing (p. 44)  
– Unfinalizing (p. 60)  
– Formatting (p. 59)  
Double-sided discs allow you to record  
both sides of a disc.  
x Recording on the A side  
Placethediscinyourcamcorderwiththeside  
with the  
symbol at the center facing  
outwards until it clicks.  
100  
         
Care and storage of the discs  
• Keep the disc clean, or the image quality  
of the audio and video output may  
deteriorate.  
• Clean the disc with a soft cloth.  
Wipe the disc from the center out. For  
dirt, clean the disc with a soft cloth  
slightly moistened in water, then remove  
the moisture with a soft, dry cloth. Do not  
use solvents such as benzine, cleaners  
intended for vinyl LPs or antistatic spray,  
as they may cause a malfunction to the  
disc.  
About the “Memory Stick”  
A "Memory Stick" is a compact, portable  
IC recording medium with a large data  
capacity. You can use only a "Memory  
Stick Duo," which is about the half size of a  
standard "Memory Stick," with your  
camcorder.  
However, we do not guarantee the  
operation of all types of "Memory Stick  
Duo" on your camcorder.  
Recording/  
Types of “Memory Stick”  
Playback  
“Memory Stick”  
(without MagicGate)  
1
“Memory Stick Duo”*  
a
(without MagicGate)  
“MagicGate Memory Stick”  
1
2
3
“Memory Stick Duo”*  
(with MagicGate)  
a* *  
• Do not expose the disc to direct sunlight  
or leave it in a humid place.  
• When you carry or store the disc, put it in  
its case.  
3
“MagicGate Memory Stick  
a*  
1
Duo” *  
• When you want to write letters or marks,  
etc. on a single-sided disc, write only on  
the printed side using an oil-based marker  
with a felt-tip, and do not touch the ink  
until it dries. Do not heat the disc or use a  
sharp-pointed tool, such as ball point pen.  
Do not dry the surface by heating. You  
cannot write, or mark, on double-sided  
discs.  
“Memory Stick PRO”  
1
2
3
“Memory Stick PRO Duo” *  
a* *  
*1 A “Memory Stick Duo” is about half the size of  
a standard “Memory Stick.”  
*2 The types of “Memory Stick” that support high  
speed data transfer. The speed of data transfer  
varies depending on the device to be used.  
3
*
“MagicGate” is a copyright protection  
technology that records and transfers the  
contents in an encrypted format. Note that data  
that uses “MagicGate” technology cannot be  
recorded or played on your camcorder.  
• Still image format: Your camcorder compresses  
and records image data in the JPEG (Joint  
Photographic Experts Group) format. The file  
extension is “.JPG.”  
• File names of still images:  
– 101- 0001: This file name appears on the  
screen of your camcorder.  
– DSC00001.JPG: This file name appears on  
the display of a computer.  
• A “Memory Stick Duo” formatted by a  
computer (Windows OS/Mac OS) does not have  
guaranteed compatibility with your camcorder.  
Continued ,  
101  
     
Maintenance and precautions (Continued)  
• Data read/write speed may vary depending on  
the combination of the “Memory Stick” and  
“Memory Stick” compliant product you use.  
• Do not insert anything other than a “Memory  
Stick Duo” into the “Memory Stick Duo” slot.  
Doing so may cause a malfunction.  
x On a location for use  
Do not use or keep the “Memory Stick  
Duo” in the following locations:  
On a “Memory Stick Duo” with a  
write-protect tab  
You can prevent accidental erasure of  
images when you slide the write-protect tab  
on the “Memory Stick Duo” with a small  
tapered object, to the write-protect position.  
• Places subject to extremely high temperature,  
such as a car parked outside in the summer.  
• Places under direct sunlight.  
• Places with extremely high humidity or subject  
to corrosive gases.  
Notes on use  
Damaged or lost image data will not be  
compensated for, and may occur in the  
following cases:  
• If you eject the “Memory Stick Duo,” turn the  
power off on your camcorder, or remove the  
battery pack for replacement while your  
camcorder is reading or writing image files on  
the “Memory Stick Duo” (while the access lamp  
is lit or flashing).  
x On the Memory Stick Duo adaptor  
After inserting a “Memory Stick Duo” into  
the Memory Stick Duo adaptor, you can use  
it with a standard “Memory Stick”  
compliant device.  
• When using a “Memory Stick Duo” with a  
“Memory Stick” compliant device, be sure to  
insert the “Memory Stick Duo” into a Memory  
Stick Duo adaptor.  
• When inserting a “Memory Stick Duo” into a  
Memory Stick Duo adaptor, make sure the  
“Memory Stick Duo” is inserted facing in the  
correct direction, then insert it all the way in.  
Note that improper use may cause a  
malfunction. Also, if you force the “Memory  
Stick Duo” into the Memory Stick Duo adaptor  
in the wrong direction, it may be damaged.  
• If you use the “Memory Stick Duo” near  
magnets or magnetic fields.  
It is recommended you make a back-up of  
important data on the hard disk of a  
computer.  
x On handling a “Memory Stick”  
Keep the following in mind when handling  
a “Memory Stick Duo.”  
• Do not insert a Memory Stick Duo adaptor  
without a “Memory Stick Duo” attached. Doing  
so may result in malfunctions of the unit.  
• Be careful not to apply excessive force when  
writing on a memo area on a “Memory Stick  
Duo.”  
• Do not attach a label or the like on a “Memory  
Stick Duo” or a Memory Stick Duo adaptor.  
x On a “Memory Stick PRO Duo”  
The maximum memory capacity of a  
“Memory Stick PRO Duo” that can be used  
on your camcorder is 4 GB.  
• When you carry or store a “Memory Stick Duo,”  
put it in its case.  
• Do not touch, or allow metallic objects to come  
into contact with the terminals.  
• Do not bend, drop or apply strong force to the  
“Memory Stick Duo.”  
• Do not disassemble or modify the “Memory  
Stick Duo.”  
On image data compatibility  
• Image data files recorded on a “Memory Stick  
Duo” by your camcorder conform to the  
“Design rule for Camera File system” universal  
standard established by the JEITA (Japan  
Electronics and Information Technology  
Industries Association).  
• On your camcorder, you cannot play back still  
images recorded on other devices (DCR-  
TRV900 or DSC-D700/D770) that do not  
conform to the universal standard. (These  
models are not sold in some regions.)  
• Do not let the “Memory Stick Duo” get wet.  
• Be careful to keep “Memory Stick Duo” media  
out of the reach of small children. There is  
danger that a child might swallow it.  
102  
     
• If you cannot use a “Memory Stick Duo” that  
has been used with another device, format it  
with your camcorder (p. 60). Note that  
formatting erases all information on the  
“Memory Stick Duo.”  
• You may not be able to play back images with  
your camcorder:  
– When playing back image data modified on  
your computer.  
To use the battery pack effectively  
• Battery pack performance decreases when the  
surrounding temperature is 10 °C (50 °F) or  
below, and the length of time you can use the  
battery pack becomes shorter. In that case, do  
one of the following to use the battery pack for a  
longer time.  
– Put the battery pack in a pocket to warm it up,  
and insert it in your camcorder right before  
you start taking shots.  
– Use a large capacity battery pack: NP-FH70/  
NP-FH100 (optional).  
• Frequent use of the LCD screen or a frequent  
playback, fast forward or rewind operation  
wears out the battery pack faster.  
– When playing back image data recorded with  
other devices.  
About the "InfoLITHIUM" battery  
pack  
Your camcorder operates only with an  
“InfoLITHIUM” battery pack (H series).  
“InfoLITHIUM” H series battery packs  
We recommend using a large capacity battery  
pack: NP-FH70/NP-FH100.  
• Be sure to set the POWER switch to OFF  
(CHG) when not recording or playing back on  
your camcorder. The battery pack is also  
consumed when your camcorder is in recording  
standby or playback pause.  
• Have spare battery packs ready for two or three  
times the expected recording time, and make  
trial recordings using a DVD-RW/DVD+RW  
before making the actual recording.  
have the  
mark.  
What is an “InfoLITHIUM” battery  
pack?  
An “InfoLITHIUM” battery pack is a  
lithium-ion battery pack that has functions  
for communicating information related to  
operating conditions between your  
camcorder and an optional AC Adaptor/  
charger.  
• Do not expose the battery pack to water. The  
battery pack is not water resistant.  
About the remaining battery time  
indicator  
The “InfoLITHIUM” battery pack  
calculates the power consumption  
according to the operating conditions of  
your camcorder, and displays the remaining  
battery time in minutes.  
• When the power goes off even though the  
remaining battery time indicator indicates that  
the battery pack has enough power to operate,  
charge the battery pack fully again. Remaining  
battery time will be indicated correctly. Note,  
however, that the battery indication will not be  
restored if it is used in high temperatures for a  
long time, or if left in a fully charged state, or  
when the battery pack is frequently used. Use  
the remaining battery time indication as a rough  
guide only.  
With an AC Adaptor/charger, the remaining  
battery time and charging time appear.  
To charge the battery pack  
• Be sure to charge the battery pack before you  
start using your camcorder.  
• We recommend charging the battery pack in an  
ambient temperature of between 10 °C to 30 °C  
(50 °F to 86 °F) until the CHG (charge) lamp  
turns off. If you charge the battery pack outside  
of this temperature range, you may not be able  
to charge it efficiently.  
• The E mark that indicates low battery flashes  
even if there are still 5 to 10 minutes of battery  
time remaining, depending on the operating  
conditions or ambient temperature.  
• After charging is complete, disconnect the cable  
from the DC IN jack on your camcorder or  
remove the battery pack.  
Continued ,  
103  
 
Maintenance and precautions (Continued)  
• For DC or AC operation, use the accessories  
recommended in these operating instructions.  
About storage of the battery pack  
• If the battery pack is not used for a long time,  
fully charge the battery pack and use it up on  
your camcorder once a year to maintain proper  
function. To store the battery pack, remove it  
from your camcorder and put it in a dry, cool  
place.  
• Do not let your camcorder get wet, for example,  
from rain or sea water. If your camcorder gets  
wet, it may malfunction. Sometimes this  
malfunction cannot be repaired.  
• If any solid object or liquid gets inside the  
casing, unplug your camcorder and have it  
checked by a Sony dealer before operating it  
any further.  
• Avoid rough handling, disassembling,  
modifying, physical shock, or impact such as  
hammering, dropping or stepping on the  
product. Be particularly careful of the lens.  
• To discharge the battery pack on your  
camcorder completely, touch  
(SETTINGS)  
t [GENERAL SET] t [A.SHUT OFF] t  
[NEVER] on the HOME MENU and leave your  
camcorder in recording standby until the power  
goes off (p. 72).  
• Keep the POWER switch setting to OFF (CHG)  
when you are not using your camcorder.  
• Do not wrap your camcorder with a towel, for  
example, and operate it. Doing so might cause  
heat to build up inside.  
• When disconnecting the power cord, pull it by  
the plug and not the cord.  
• Do not damage the power cord such as by  
placing anything heavy on it.  
About battery life  
• Battery capacity decreases over time and  
through repeated use. If decreased usage time  
between charges becomes significant, it is  
probably time to replace it with a new one.  
• Each battery’s life is governed by storage,  
operating and environmental conditions.  
About handling of your  
camcorder  
• Keep metal contacts clean.  
• Keep the Remote Commander and button-type  
battery out of children’s reach. If the battery is  
accidentally swallowed, consult a doctor  
immediately.  
• If the battery electrolytic liquid has leaked:  
– consult your local authorized Sony service  
facility.  
– wash off any liquid that may have contacted  
your skin.  
– if any liquid gets in your eyes, wash with  
plenty of water and consult a doctor.  
On use and care  
• Do not use or store the camcorder and  
accessories in the following locations:  
– Anywhere extremely hot or cold. Never leave  
them exposed to temperatures above 60 °C  
(140 °F), such as under direct sunlight, near  
heaters or in a car parked in the sun. They  
may malfunction or become deformed.  
– Near strong magnetic fields or mechanical  
vibration. The camcorder may malfunction.  
– Near strong radio waves or radiation. The  
camcorder may not be able to record properly.  
– Near AM receivers and video equipment.  
Noise may occur.  
– On a sandy beach or anywhere dusty. If sand  
or dust gets in your camcorder, it may  
malfunction. Sometimes this malfunction  
cannot be repaired.  
x When not using your camcorder for a  
long time  
• Periodically turn it on and let it run such as by  
playing back discs or recording for about 3  
minutes.  
• Remove a disc from your camcorder.  
• Use up the battery pack completely before  
storing it.  
– Near windows or outdoors, where the LCD  
screen, the viewfinder, or the lens may be  
exposed to direct sunlight. This damages the  
inside of the viewfinder or the LCD screen.  
– Anywhere very humid.  
• Operate your camcorder on DC 6.8 V/7.2 V  
(battery pack) or DC 8.4 V (AC Adaptor).  
104  
 
x To clean the LCD screen  
Moisture condensation  
If fingerprints or dust make the LCD screen  
dirty, it is recommended you use a soft  
cloth to clean it. When you use the LCD  
Cleaning Kit (optional), do not apply the  
cleaning liquid directly to the LCD screen.  
Use cleaning paper moistened with the  
liquid.  
If your camcorder is brought directly from a  
cold place to a warm place, moisture may  
condense inside your camcorder, on the  
surface of the disc, or on the pickup lens.  
This may cause a malfunction to your  
camcorder.  
x If moisture condensation has occurred  
Leave your camcorder for about 1 hour  
without turning it on.  
x On adjustment of the touch panel  
(CALIBRATION)  
The buttons on the touch panel may not  
work correctly. If this happens, follow the  
procedure below. It is recommended that  
you connect your camcorder to the wall  
outlet using the supplied AC Adaptor  
during the operation.  
x Note on moisture condensation  
Moisture may condense when you bring  
your camcorder from a cold place into a  
warm place (or vice versa) or when you use  
your camcorder in a humid place as  
follows:  
1 Turn on your camcorder, then press  
(HOME).  
• You bring your camcorder from a ski  
slope into a place warmed up by a heating  
device.  
2 Touch  
(SETTINGS) t [GENERAL  
SET] t [CALIBRATION].  
• You bring your camcorder from an air  
conditioned car or room into a hot place  
outside.  
• You use your camcorder after a squall or a  
shower.  
• You use your camcorder in a hot and  
humid place.  
3 Touch “×” displayed on the screen with the  
corner of the “Memory Stick Duo” or the  
like. The position of “×” changes.  
x How to prevent moisture condensation  
When you bring your camcorder from a  
cold place into a warm place, put your  
camcorder in a plastic bag and seal it  
tightly. Remove the bag when the air  
temperature inside the plastic bag has  
reached the surrounding temperature (after  
about 1 hour).  
Touch [CANCEL] to cancel.  
If you did not press the right spot, try the  
calibration again.  
b Notes  
• Do not use a sharp-pointed object for  
calibration. Doing so may damage the LCD  
screen.  
• You cannot calibrate the LCD screen if it is  
rotated, or closed with the screen facing out.  
LCD screen  
• Do not exert excessive pressure on the LCD  
screen, as it may cause damage.  
• If your camcorder is used in a cold place, a  
residual image may appear on the LCD screen.  
This is not a malfunction.  
• While using your camcorder, the back of the  
LCD screen may heat up. This is not a  
malfunction.  
Continued ,  
105  
         
Maintenance and precautions (Continued)  
operate your camcorder about once a month to  
keep it in optimum state for a long time.  
On handling the casing  
• If the casing is soiled, clean the camcorder body  
with a soft cloth lightly moistened with water,  
and then wipe the casing with a dry soft cloth.  
Cleaning inside the viewfinder  
Remove any dust from inside the  
viewfinder by following the steps below.  
1 Pull out the viewfinder.  
2 While pushing in the tab on the side with a  
fine-tipped object such as a ball point pen,  
pull the eyecup block in the direction of the  
arrow to remove.  
• Avoid the following to avoid damage to the  
finish:  
– Using chemicals such as thinner, benzine,  
alcohol, chemical cloths, repellent, insecticide  
and sunscreen.  
– Handling the camcorder with above  
substances on your hands.  
– Leaving the casing in contact with rubber or  
vinyl objects for a long period of time.  
On the pickup lens  
• Do not touch the lens inside the disc  
cover. Keep the disc cover closed except  
when inserting and removing the disc, to  
keep dust out.  
• When your camcorder does not work  
because the pickup lens is dirty, clean it  
with a blower (not supplied). Do not touch  
the pickup lens directly during cleaning  
because this may cause the camcorder to  
malfunction.  
3 Remove dust from the eyecup block with a  
camera blower, etc.  
Pickup lens  
4 Press the viewfinder onto the body of the  
camcorder.  
5 Remove dust from the inside area where  
the eyecup block was attached with a  
camera blower, etc.  
About care and storage of the lens  
• Wipe the surface of the lens clean with a soft  
cloth in the following instances:  
– When there are fingerprints on the lens  
surface.  
– In hot or humid locations  
– When the lens is exposed to salty air such as  
at the seaside.  
• Store in a well-ventilated location subject to  
little dirt or dust.  
• To prevent mold, periodically clean the lens as  
described above. It is recommended that you  
106  
   
6 Attach the eyecup block to the viewfinder,  
pushing it straight on until it clicks.  
On charging the pre-installed  
rechargeable battery  
Your camcorder has a pre-installed  
rechargeable battery to retain the date, time,  
and other settings even when the POWER  
switch is set to OFF (CHG). The pre-  
installed rechargeable battery is always  
charged while your camcorder is connected  
to the wall outlet via the AC Adaptor or  
while the battery pack is attached. The  
rechargeable battery will be fully  
discharged in about 3 months if you do  
not use your camcorder at all. Use your  
camcorder after charging the pre-installed  
rechargeable battery.  
b Notes  
• The eyecup block is a precision part. Do not  
disassemble it further.  
However, even if the pre-installed  
• Do not touch the lens of the eyecup block.  
rechargeable battery is not charged, the  
camcorder operation will not be affected as  
long as you are not recording the date.  
• If you turn the viewfinder lens adjustment lever  
after removing the eyecup block from your  
camcorder, the lever and lens may come out the  
eyecup block. If this happens, replace them as  
follows:  
x Procedures  
Connect your camcorder to a wall outlet  
using the supplied AC Adaptor, and leave it  
with the POWER switch set to OFF (CHG)  
for more than 24 hours.  
1 Attach the lever to the eyecup block in the  
position illustrated. Do not turn the lever  
before fitting the lens in place.  
2 Place the lens in the eyecup block so that  
the three projections fit into the respective  
grooves.  
3 Turn the lever in the direction of the arrow  
to insert the lens fully into the eyecup  
block.  
107  
   
Specifications  
Effective (Still, 16:9)  
Approx. 750 000 pixels  
Lens  
System  
Video compression format  
MPEG2/JPEG (Still images)  
Audio compression format  
Carl Zeiss Vario-Tessar  
DCR-DVD108/DVD608  
Optical:40×, Digital:80×, 2 000×  
DCR-DVD308/DVD708  
DCR-DVD108/DVD608  
Dolby Digital 2ch  
Dolby Digital Stereo Creator  
DCR-DVD308/DVD708  
Dolby Digital 2/5.1ch  
Dolby Digital 5.1 Creator  
Video signal  
NTSC color, EIA standards  
Usable discs  
8 cm DVD-RW/DVD+RW/DVD-R/  
DVD+R DL  
Recording format  
Optical:25×, Digital:50×, 2 000×  
Filter diameter: 30mm (1 3/16 in.)  
Focal length  
DCR-DVD108/DVD608  
F=1.8-4.1  
f=1.9 - 76.0mm (3/32 - 3 in.)  
When converted to a 35 mm still camera  
For movies:  
36 - 1 440mm (1 7/16 - 56 3/4 in.)  
For still images:  
36 - 1 440mm (1 7/16 - 56 3/4 in.)  
DCR-DVD308/DVD708  
F=1.8-3.2  
f=2.5 - 62.5mm (1/8 - 2 1/2 in.)  
When converted to a 35 mm still camera  
For movies:  
41 - 1 189mm (1 5/8 - 46 7/8 in.) (16:9)**  
43 - 1 075mm (1 3/4 - 42 3/8 in.) (4:3)  
For still images:  
Movie  
DVD-RW: DVD-VIDEO (VIDEO mode),  
DVD-Video Recording  
(VR mode)  
DVD+RW: DVD+RW Video  
DVD-R/DVD+R DL: DVD-VIDEO  
Still image  
Exif* Ver.2.2  
Recording time  
36 - 900mm (1 7/16 - 35 1/2 in.) (4:3)  
39 - 975mm (1 9/16 - 38 1/2 in.) (16:9)  
Color temperature  
[AUTO], [ONE PUSH], [INDOOR] (3 200 K),  
[OUTDOOR] (5 800 K)  
Minimum illumination  
DVD-RW/DVD+RW/DVD-R  
HQ:Approx. 20 min  
SP: Approx. 30 min  
LP: Approx. 60 min  
DVD+R DL  
HQ:Approx. 35 min  
SP: Approx. 55 min  
LP: Approx. 110 min  
Viewfinder  
Electric viewfinder (color)  
Image device  
DCR-DVD108/DVD608  
3 lx (lux) (AUTO SLW SHUTTR ON, Shutter  
speed 1/30 second)  
0 lx (lux) (during NightShot plus function)  
DCR-DVD308/DVD708  
4 lx (lux) (AUTO SLW SHUTTR ON, Shutter  
speed 1/30 second)  
DCR-DVD108/DVD608  
3mm(1/6type)CCD(ChargeCoupledDevice)  
Gross:  
0 lx (lux) (during NightShot plus function)  
* “Exifisafileformatforstillimages,established  
bytheJEITA(JapanElectronicsandInformation  
Technology Industries Association). Files in this  
format can have additional information such as  
your camcorder’s setting information at the time  
of recording.  
Approx. 680 000 pixels  
Effective (Movie):  
Approx. 340 000 pixels  
Effective (Still):  
Approx. 340 000 pixels  
DCR-DVD308/DVD708  
3mm (1/6 type) CCD (Charge Coupled Device)  
Gross:  
Approx. 1 070 000 pixels  
Effective (Movie,16:9)  
Approx. 670 000 pixels  
Effective (Movie,4:3)  
Approx. 690 000 pixels  
Effective (Still, 4:3)  
**In 16:9 mode, the focal length figures are actual  
figures resulting from wide angle pixel readout.  
• Manufactured under license from Dolby  
Laboratories.  
Approx. 1 000 000 pixels  
108  
   
DCR-DVD308/DVD708  
400 g (14 oz) main unit only  
450 g (15 oz) including the NP-FH40  
rechargeable battery pack and disc  
Supplied accessories  
Input/Output connectors  
Audio/Video output  
10 pin connector  
Video signal: 1 Vp-p, 75 Ω(ohms)  
Luminance signal: 1 Vp-p, 75 Ω(ohms)  
Chrominance signal: 0.286 Vp-p, 75 Ω(ohms)  
Audio signal: 327 mV (at Load impedance  
47 kΩ(kilohms)), Output impedance less than  
2.2 kΩ(kilohms)  
See page 21.  
AC Adaptor AC-L200/L200B  
Power requirements  
AC 100 - 240 V, 50/60 Hz  
Current consumption  
0.35 - 0.18 A  
USB jack  
mini-B  
REMOTE jack (DCR-DVD308/DVD708)  
Power consumption  
Stereo mini-minijack (Ø 2.5 mm)  
18W  
Output voltage  
DC 8.4V*  
Operating temperature  
LCD screen  
Picture  
DCR-DVD108/DVD608  
6.2 cm (2.5 type)  
0°C to +40°C (32°F to 104°F)  
DCR-DVD308/DVD708  
6.9 cm (2.7 type, aspect ratio 16:9)  
Total number of pixels  
Storage temperature  
-20°C to +60°C (-4°F to +140°F)  
Dimensions (Approx.)  
48 × 29 × 81 (1 15/16 × 1 3/16 × 3 1/4 in.)  
(w× h× d) excluding the projecting parts  
Mass (Approx.)  
123 200 (560 × 220)  
General  
Power requirements  
6.8 V/7.2 V (battery pack)  
8.4 V (AC Adaptor)  
Average power consumption  
170 g (6 oz) excluding the power cord  
*
See at the label of AC Adaptor for other  
specifications.  
DCR-DVD108/DVD608  
Rechargeable battery pack NP-FH40  
LCD:2.9W  
Maximum output voltage  
Viewfinder:2.7W  
DCR-DVD308/DVD708  
LCD:3.2W  
(When the LCD backlight is on)  
Viewfinder:2.9W  
DC8.4V  
Output voltage  
DC7.2V  
Capacity  
4.9 wh (680 mAh)  
Dimensions (Approx.)  
31.8 × 18.5 × 45.0 mm  
(1 5/16 × 3/4 × 1 13/16 in.) (w× h× d)  
Mass (Approx.)  
45 g (1.6 oz)  
Operating temperature  
0°C to +40°C (32°F to 104°F)  
Type  
Operating temperature  
0°C to +40°C (32°F to 104°F)  
Storage temperature  
-20°C to +60°C (-4°F to +140°F)  
Dimensions (Approx.)  
54.5 × 89 × 130.5 mm (2 1/4 × 3 5/8 × 5 1/4  
in.) (w × h × d) including the projecting parts  
54.5 × 89 × 130.5 mm (2 1/4 × 3 5/8 × 5 1/4  
in.) (w × h × d) including the projecting parts  
with supplied battery pack NP-FH40 attached  
Mass (Approx.)  
Li-ion  
DCR-DVD108/DVD608  
Design and specifications are subject to change  
without notice.  
390 g (13 oz) main unit only  
440 g (15 oz) including the NP-FH40  
rechargeable battery pack and disc  
109  
On trademarks  
Notes on the License  
• “Handycam” and  
are  
registered trademarks of Sony Corporation.  
• “Memory Stick,” “  
Duo,” “  
PRO Duo,” “  
“MagicGate,” “  
“MagicGate Memory Stick” and “MagicGate  
Memory Stick Duo” are trademarks of Sony  
Corporation.  
• “InfoLITHIUM” is a trademark of Sony  
Corporation.  
ANY USE OF THIS PRODUCT OTHER THAN  
CONSUMER PERSONAL USE IN ANY  
MANNER THAT COMPLIES WITH THE  
MPEG-2 STANDARD FOR ENCODING  
VIDEO INFORMATION FOR PACKAGED  
MEDIA IS EXPRESSLY PROHIBITED  
WITHOUT A LICENSE UNDER APPLICABLE  
PATENTS IN THE MPEG-2 PATENT  
PORTFOLIO, WHICH LICENSE IS  
,” “Memory Stick  
,” “Memory Stick  
,”  
,”  
AVAILABLE FROM MPEG LA, L.L.C., 250  
STEELE STREET, SUITE 300, DENVER,  
COLORADO 80206.  
• DVD-RW, DVD+RW, DVD-R, and DVD+R  
DL logo are trademarks.  
• Dolby and the double-D symbol are trademarks  
of Dolby Laboratories.  
• Dolby Digital 5.1 Creator is a trademark of  
Dolby Laboratories.  
• Microsoft, Windows, and Windows Media are  
either registered trademarks or trademarks of  
Microsoft Corporation in the United States and/  
or other countries.  
"C Library," "Expat," "zlib," and "libjpeg"  
software are provided in your camcorder. We  
provide this software based on license agreements  
with their owners of copyright. Based on requests  
by the owners of copyright of these software  
applications, we have an obligation to inform you  
of the following. Please read the following  
sections.  
Read “license1.pdf” in the “License” folder on the  
CD-ROM. You will find licenses (in English) of  
"C Library," "Expat," "zlib," and "libjpeg"  
software.  
• Macintosh and Mac OS are registered  
trademarks of Apple Computer, Inc in the U.S.  
and other countries.  
• Pentium is a trademark or registered trademark  
of Intel Corporation.  
• Adobe, the Adobe logo, and Adobe Acrobat are  
either registered trademarks or trademarks of  
Adobe Systems Incorporated in the United  
States and/or other countries.  
On GNU GPL/LGPL applied software  
The software that is eligible for the following  
GNU General Public License (hereinafter referred  
to as "GPL") or GNU Lesser General Public  
License (hereinafter referred to as "LGPL") are  
included in the camcorder.  
All other product names mentioned herein may be  
the trademarks or registered trademarks of their  
respective companies. Furthermore, ™ and “®”  
are not mentioned in each case in this manual.  
This informs you that you have a right to have  
access to, modify, and redistribute source code for  
these software programs under the conditions of  
the supplied GPL/LGPL.  
Source code is provided on the web. To  
download, go to the following website and select  
HDR-UX1/HDR-SR1.  
http://www.sony.net/Products/Linux/  
We would prefer you do not contact us about the  
contents of source code.  
Read “license2.pdf” in the “License” folder on the  
CD-ROM. You will find licenses (in English) of  
"GPL," and "LGPL" software.  
To view the PDF, Adobe Reader is needed. If it is  
not installed on your computer, you can download  
it from the Adobe Systems web page:  
http://www.adobe.com/  
110  
 
QIduicek Rnetfeirefnyceing parts and controls  
The numbers in ( ) are reference pages.  
A Power zoom lever (36, 41)  
B PHOTO button (31, 35)  
C POWER switch (25)  
N Tripod receptacle  
Attach the tripod (optional: the length of  
the screw must be less than 5.5 mm  
(7/32 in.)) to the tripod receptacle using  
a tripod screw.  
D Viewfinder lens adjustment lever (27)  
E Eyecup (106)  
O BATT (battery) release lever (22)  
F Viewfinder (27)  
G
(Movie)/  
(Still) mode lamps  
H Battery pack (22)  
I START/STOP button (31, 35)  
J NIGHTSHOT PLUS switch (37)  
K CHG (charge) lamp (22)  
L DC IN jack (22)  
M Grip belt (34)  
Continued ,  
111  
       
Identifying parts and controls (Continued)  
A Active Interface Shoe  
*
E Internal microphone (36)  
An Active Interface Shoe compatible  
microphone (optional) will take  
precedence when connected (DCR-  
DVD308/DVD708).  
The Active Interface Shoe supplies  
power to optional accessories such as a  
video light, a flash, or a microphone.  
The accessory can be turned on or off as  
you operate the POWER switch on your  
camcorder. Refer to the operating  
instructions supplied with your  
F Lens (Carl Zeiss Lens) (8)  
G Remote sensor*  
Point the Remote Commander (p. 114)  
towards the remote sensor to operate  
your camcorder.  
accessory for details.  
The Active Interface Shoe has a safety  
device for fixing the installed accessory  
securely. To connect an accessory, press  
down and push it to the end, and then  
tighten the screw. To remove an  
H Infrared port (64)  
I LENS COVER switch (27)  
J REMOTE jack*  
accessory, loosen the screw, and then  
press down and pull out the accessory.  
Connect other optional accessories.  
K A/V OUT jack (42, 54)  
• When you are recording movies with an  
external flash (optional) connected to the  
accessory shoe, turn off the power of the  
external flash to prevent charging noise  
being recorded.  
* DCR-DVD308/DVD708  
• When an external microphone (optional) is  
connected, it takes precedence over the  
internal microphone (p. 36).  
B ACCESS lamp (Disc) (28)  
C Disc cover OPEN switch (28)  
D Disc cover (28)  
112  
     
A “Memory Stick Duo” slot (29)  
M DISP/BATT INFO button (23)  
B LCD screen/touch panel (19, 27)  
N WIDE SELECT button** (37)  
C
(HOME) button (19, 62)  
*
DCR-DVD108/DVD608  
D Zoom buttons (36, 41)  
** DCR-DVD308/DVD708  
E START/STOP button (31, 35)  
F
(VIEW IMAGES) button (32, 39)  
G EASY button (31)  
H BACK LIGHT button (37)  
I Speaker  
Playback sounds come out from the  
speaker. For how to adjust the volume,  
J Access lamp (“Memory Stick Duo”)  
K
(USB) jack (55)  
L RESET button  
Initializes all the settings, including the  
setting of the date and time.  
Continued ,  
113  
   
Identifying parts and controls (Continued)  
button or an item with b / B / v / V, then press  
ENTER to enter.  
Remote Commander (DCR-DVD308/  
DVD708)  
b Notes  
• Remove the insulation sheet before using the  
Remote Commander.  
Insulation sheet  
• PointtheRemoteCommandertowardstheremote  
sensor to operate your camcorder (p. 112).  
• When no commands have been sent from the  
Remote Commander in a certain period, the  
orange frame disappears. When you press any of  
b/ B/ v/ V, or ENTER again, the frame appears  
at the position where it was displayed last.  
You cannot select some buttons on the LCD  
screen using b / B / v / V.  
To change the battery of the Remote  
Commander  
1 While pressing on the tab, inset your  
fingernail into the slit to pull out the battery  
case.  
2 Place a new battery with the + side facing  
up.  
3 Insert the battery case back into the Remote  
Commander until it clicks.  
A DATA CODE button (67)  
Displays the date and time or camera setting  
dataoftherecordedimageswhenyoupressthis  
during playback.  
B PHOTO button (31, 35)  
The on-screen image when you press this  
button will be recorded as a still image.  
C SCAN/SLOW buttons (32, 40)  
D . > (Previous/Next) buttons (32,  
E PLAY button (32, 40)  
F STOP button (32, 40)  
Tab  
G DISPLAY button (23)  
H Transmitter  
WARNING  
Battery may explode if mistreated. Do not  
recharge, disassemble or dispose of in  
fire.  
I START/STOP button (31, 35)  
J Power zoom buttons (36, 41)  
K PAUSE buttons (32, 40)  
L VISUAL INDEX button (32, 39)  
• When the lithium battery becomes weak, the  
operating distance of the Remote Commander  
may shorten, or the Remote Commander may  
not function properly. In this case, replace the  
battery with a Sony CR2025 lithium battery.  
Use of another battery may present a risk of fire  
or explosion.  
Displays a VISUAL INDEX screen when you  
press this during playback.  
M b / B / v / V / ENTER buttons  
When you press any button on the VISUAL  
INDEX screen or Playlist, the orange frame  
appears on the LCD screen. Select a desired  
114  
         
Indicators displayed during recording/playback  
Recording movies  
Recording still images  
SP  
A Recording mode (HQ/SP/LP) (64)  
B HOME button (19, 62)  
K Quality ([FINE] / [STD]) (66)  
L Image size (66)  
C Remaining battery (approx.) (23)  
M Appears while a still image is being  
saved.  
D Recording status ([STBY] (standby) or  
[REC] (recording))  
N Recording folder  
E Counter (hour/minute/second)  
z Tips  
F Disc type (14)  
• As the number of still images recorded in  
“Memory Stick Duo” increases, new folders are  
automatically created to store them.  
G Recording format (14)  
Appears for DVD-RW only.  
H OPTION button (20, 73)  
I VIEW IMAGES button (32, 39)  
J 5.1ch surround recording (36)  
Continued ,  
115  
     
Indicators displayed during recording/playback (Continued)  
Viewing movies  
Viewing still images  
SP  
A Recording mode (HQ/SP/LP) (64)  
B Return button  
L Image size (66)  
M Current still image number /Total  
number of recorded still images  
C Remaining battery (approx.) (23)  
D Playback mode  
N Slide show button (41)  
O Previous/Next button (33, 40)  
P Data file name  
E Counter (hour/minute/second)  
F Disc type (14)  
Q VISUAL INDEX button (32, 39)  
R Playback folder  
G Previous/Next button (32, 40)  
H Scene number  
I OPTION button (20, 73)  
J Video operation buttons (32, 40)  
K 5.1ch surround recording (36)  
116  
 
Indicator  
Meaning  
Indicators when you made  
changes  
PictBridge connecting  
Following indicators appear during  
recording/playback to indicate the settings  
of your camcorder.  
E Z  
Warning (94)  
Bottom  
Upper left  
Upper right  
Indicator  
Meaning  
SP  
Picture effect (79)  
Digital effect (79)  
Manual focus (75)  
9
SCENE SELECTION  
Bottom  
Center  
Upper left  
Backlight (37)  
.
n
White balance (77)  
SteadyShot off (65)  
Indicator  
Meaning  
5.1ch surround recording/  
playback (36)  
EXPOSURE (76)/  
SPOT METER (76)  
Self-timer recording (79)  
Tele macro (75)  
MICREF LEVEL low  
(79)  
Flash (67, 79)  
Data code during recording  
[WIDE SELECT] (64)  
WIDE SELECT (37)  
The date, time, and camera setting data of  
the recorded images are recorded  
automatically on the disc and “Memory  
Stick Duo.” They are not displayed while  
recording. However, you can check them as  
[DATA CODE] during playback (p. 67).  
You can view the recording date and time  
on another device, etc. ([SUB-T DATE],  
p. 65).  
Upper right  
Indicator  
Meaning  
Fader (78)  
LCD backlight off (27)  
Center  
Indicator  
Meaning  
NightShot plus (37)  
Super NightShot plus  
(78)  
Color Slow Shutter (78)  
Slide show set (41)  
117  
     
Glossary  
x 5.1ch surround sound  
x VR mode  
A system that plays back sound on 6 speakers, 3 at  
the front (left, right and center) and 2 at the rear  
(right and left) with an additional low-pass  
subwoofer counted as a 0.1 channel for  
frequencies of 120 Hz or lower.  
One of the recording formats you can select when  
using a DVD-RW. VR mode enables editing  
(deleting or sequence rearrangement) with your  
camcorder Finalizing the disc lets you play it back  
on a VR mode compatible DVD device.  
x DVD menu  
x VISUAL INDEX  
A menu screen that enables you to select a  
particular scene from a disc being played back on  
another device.  
This function displays images of movies and still  
images you have recorded so that you can select  
those scenes you want to play back.  
x Dolby Digital  
An audio encoding (compression) system  
developed by Dolby Laboratories Inc.  
x Dolby Digital 5.1 Creator  
Sound compression technology developed by  
Dolby Laboratories Inc. which compresses audio  
efficiently while preserving high sound quality. It  
enables recording of 5.1ch surround sound while  
using disc space more efficiently. Discs created  
by Dolby Digital 5.1 Creator can be played back  
on a device compatible with the disc created on  
your camcorder.  
x MPEG  
MPEG stands for Moving Picture Experts Group,  
the group of standards for the coding (image  
compression) of video (movie) and audio. There  
are MPEG1 and MPEG2 formats. Your  
camcorder records movies with SD (standard  
definition) image quality in MPEG2 format.  
x Thumbnail  
Reduced-size images which enable you to view  
many images at the same time. “VISUAL  
INDEX” and “DVD MENU” use a thumbnail  
display system.  
x VIDEO mode  
One of the recording formats you can select when  
using a DVD-RW. VIDEO mode provides  
excellent compatibility with other DVD devices.  
118  
                 
Index  
Numeric  
F
FORMAT  
D
DELETE  
A
DIVIDE  
G
A.SHUT OFF (Auto shut off)  
H
B
Button-type lithium battery  
I
C
E
J
Continued ,  
119  
 
Index (Continued)  
L
P
Playlist  
M
MANAGE DISC/MEMORY  
Memory Stick Duo adaptor  
Pre-installed rechargeable  
Q
T
N
R
REC MODE (Recording mode)  
O
Original  
U
S
V
120  
Spanish Quick Guide/Guía rápida en español  
Paso 1: Comprobación de los componentes  
suministrados  
Batería recargable NP-FH40 (1)  
Asegúrese de disponer de los siguientes  
componentes suministrados con su  
videocámara.  
El número entre paréntesis indica el número  
de componentes suministrados de cada  
artículo.  
CD-ROM “Handycam Application  
Software” (1)  
Adaptador de alimentación de ca (1)  
Guía de operaciones (este manual) (1)  
Cable de alimentación (1)  
Cable de conexión de A/V (1)  
Cable USB (1)  
Control remoto inalámbrico (DCR-  
DVD308/DVD708) (1)  
La pila de litio tipo botón ya viene instalada.  
122  
   
Paso 2: Carga de la batería  
Interruptor POWER  
2
1
3
Toma  
entrada de  
cc  
Cubierta de la toma  
Pila  
Clavija de cc  
4
Indicador  
CHG  
(carga)  
4
Cable de alimentación  
Adaptador de  
alimentación de ca  
Al tomacorriente de pared  
Puede cargar la batería  
3
Conecte el adaptador de  
alimentación de ca a la toma  
entrada de cc de la videocámara.  
“InfoLITHIUM” (serie H) luego de  
instalarla en la videocámara.  
b Notas  
• Únicamente es posible utilizar la batería  
“InfoLITHIUM” serie H.  
Abra la cubierta de la toma y conecte la  
clavija de cc del adaptador de  
alimentación de ca  
Oriente la marca v de la clavija de cc y  
hágala coincidir con la marca v de la  
videocámara.  
1
2
Deslice el interruptor POWER en  
el sentido de la flecha hasta la  
posición OFF (CHG) (ajuste  
predeterminado).  
4
5
Conecte el cable de alimentación  
al adaptador de alimentación de  
ca y al tomacorriente de pared.  
Instale la batería deslizándola en  
el sentido de la flecha hasta que  
haga clic.  
El indicador CHG (carga) se enciende y  
se inicia el proceso de carga. El  
indicador CHG (carga) se apaga cuando  
la batería está completamente cargada.  
Desconecte el adaptador de  
alimentación de ca de la toma  
entrada de cc de la videocámara.  
Continúa ,  
123  
Paso 2: Carga de la batería (continuación)  
b Notas  
• Desconecte el adaptador de alimentación de ca  
de la toma entrada de cc mientras sujeta la  
videocámara y la clavija de cc  
Para extraer la batería  
Deslice el interruptor POWER hacia la  
posición OFF(CHG).  
Deslice la palanca BATT (liberación de la  
batería) y extraiga la batería.  
Pasados unos instantes, se mostrarán el  
tiempo de grabación restante aproximado y  
la información de la batería durante 7  
segundo. Puede ver la información sobre la  
batería durante un máximo de 20 s  
(segundo) si presiona de nuevo DISP/  
BATT INFO mientras aparece dicha  
información.  
Palanca BATT  
(liberación de la  
batería)  
Energía restante de la batería (aprox.)  
BATTERY INFO  
NIVEL CARGA BATERÍA  
b Notas  
• Antes de extraer la batería o el adaptador de  
alimentación de ca  
TIEMPO GRAB DISPON  
compruebe que el indicador  
(película) o  
(imágenes fijas) se haya apagado.  
Capacidad de grabación (aprox.)  
Almacenamiento de la batería  
Descargue la batería completamente antes  
de guardarla durante un largo período de  
tiempo.  
Tiempo de carga  
Tiempo aproximado (min) necesario para  
cargar completamente una batería  
totalmente descargada.  
Uso de una fuente de alimentación  
externa  
Tiempo de  
carga  
Batería  
Realice las mismas conexiones que cuando  
carga la batería. La batería no se descargará  
en ese caso.  
NP-FH40  
(suministrada)  
125  
NP-FH50  
NP-FH70  
NP-FH100  
135  
170  
390  
Comprobación de la energía restante  
de la batería (Información sobre la  
batería)  
Ajuste el interruptor POWER en la posición  
OFF (CHG) y, a continuación, presione  
DISP/BATT INFO.  
Tiempo de grabación  
Tiempo aproximado (min) disponible  
cuando utiliza una batería completamente  
cargada.  
124  
b Notas  
DCR-DVD108/DVD608  
• Todos los tiempos se han calculado con el modo  
de grabación [SP] en las siguientes condiciones:  
Indicación superior: con la luz de fondo de la  
pantalla LCD encendida.  
Tiempo de  
grabación  
continua  
Tiempo de  
grabación  
normal*  
Batería  
NP-FH40  
(suministrada)  
95  
100  
110  
120  
235  
255  
545  
590  
45  
50  
Indicación central: con la luz de fondo de la  
pantalla LCD apagada (DCR-DVD308/  
DVD708).  
Indicación inferior: tiempo de grabación al  
grabar con el visor y con el panel LCD cerrado.  
NP-FH50  
NP-FH70  
NP-FH100  
50  
55  
110  
120  
260  
285  
Tiempo de reproducción  
Tiempo aproximado (min) disponible  
cuando utiliza una batería completamente  
cargada.  
DCR-DVD308/DVD708  
DCR-DVD108/DVD608  
Tiempo de  
grabación  
continua  
Tiempo de  
grabación  
normal*  
Panel LCD  
abierto  
Panel LCD  
cerrado  
Batería  
Batería  
NP-FH40  
(suministrada)  
120  
135  
NP-FH40  
(suministrada)  
85  
95  
40  
45  
NP-FH50  
NP-FH70  
NP-FH100  
140  
300  
695  
155  
330  
760  
95  
45  
NP-FH50  
NP-FH70  
NP-FH100  
100  
110  
110  
215  
235  
235  
495  
545  
545  
50  
50  
DCR-DVD308/DVD708  
50  
105  
110  
110  
235  
260  
260  
Panel LCD  
abierto*  
Panel LCD  
cerrado  
Batería  
NP-FH40  
(suministrada)  
110  
125  
NP-FH50  
NP-FH70  
NP-FH100  
130  
280  
635  
145  
315  
725  
* Con la luz de fondo de la pantalla LCD  
encendida.  
* El tiempo de grabación normal indica el tiempo  
de grabación al repetir las operaciones de inicio/  
parada, conexión/desconexión de la  
alimentación y utilización del zoom.  
Acerca de la batería  
• Antes de reemplazar la batería, mueva el  
interruptor POWER hasta la posición OFF  
(CHG) y apague el indicador  
(Imágenes fijas).  
(Película) o  
Continúa ,  
125  
Paso 2: Carga de la batería  
(continuación)  
Paso 3: Conexión de  
la alimentación y  
ajuste de la fecha y  
hora  
• El indicador CHG (carga) parpadeará durante la  
carga o la Información sobre la batería no se  
mostrará correctamente en las siguientes  
situaciones:  
– La batería no está conectada correctamente.  
– La batería está dañada.  
– La batería está completamente gastada (sólo  
para la información sobre la batería).  
• Cuando el adaptador de alimentación de ca esté  
conectado a la toma de entrada de cc de la  
videocámara, la batería no suministrará  
Ajuste la fecha y hora cuando utilice la  
videocámara por primera vez. Si no ajusta  
la fecha y hora, aparecerá la pantalla  
[AJUS.RELOJ] cada vez que encienda la  
videocámara o cambie la posición del  
interruptor POWER.  
Interruptor POWER  
alimentación, aunque el cable de alimentación  
esté desconectado del tomacorriente de pared.  
• Cuando conecte una luz de video opcional, se  
recomienda que utilice una batería NP-FH70/  
NP-FH100 (DCR-DVD308/DVD708).  
• No es recomendable utilizar una batería NP-  
FH30, que sólo permite realizar grabaciones y  
reproducciones de corta duración con la  
videocámara.  
Acerca del tiempo de carga/grabación/  
reproducción  
• Tiempos calculados utilizando la videocámara a  
una temperatura de 25 °C (se recomienda una  
temperatura de 10 a 30 °C)  
1
Mientras mantiene pulsado el  
botón verde, deslice el interruptor  
POWER varias veces en la  
dirección de la flecha para  
encender la alimentación hasta  
que se encienda el indicador  
correspondiente.  
• El tiempo de grabación y de reproducción serán  
más cortos cuando utilice la videocámara a  
bajas temperaturas.  
• En función de las condiciones en las que utilice  
la videocámara, es posible que el tiempo de  
grabación y reproducción se vean reducidos.  
Acerca del adaptador de alimentación de ca  
• Si utiliza el adaptador de alimentación de ca  
conéctelo a un tomacorriente de pared cercano.  
Si se produce alguna falla de funcionamiento al  
utilizar la videocámara, desconecte el adaptador  
de alimentación de ca del tomacorriente de  
inmediato.  
(Película): para grabar películas  
(Imágenes fijas): para tomar  
imágenes fijas  
Aparecerá la pantalla [AJUS.RELOJ].  
• No utilice el adaptador de alimentación de ca  
colocado en un espacio angosto, tal como entre  
una pared y los muebles.  
min  
AJUS.ZONA  
Chicago  
Ciudad de México  
Nueva York  
Bogotá  
Santiago  
• No provoque un cortocircuito en la clavija de cc  
del adaptador de alimentación de ca ni en el  
terminal de la batería con algún objeto metálico,  
ya que podría causar fallos de funcionamiento.  
12:00:00 AM  
AJUS.RELOJ  
SIGUIENTE  
• Aunque la videocámara esté apagada, seguirá  
recibiendo alimentación de ca (corriente  
doméstica) mientras esté conectada a la toma de  
pared mediante el adaptador de alimentación de ca  
126  
Restablecimiento de la fecha y hora  
2
Seleccione la zona geográfica  
que desee mediante v/V y, a  
continuación, toque [SIGUIENTE].  
Seleccione  
(HOME) t  
(AJUSTES) t [AJ.REL./IDIOM.  
]
t [AJUS.RELOJ] y ajuste la fecha y hora.  
b Notas  
• Si no utiliza la videocámara durante 3 meses  
aproximadamente, la batería recargable  
incorporada se descargará y es posible que los  
ajustes de fecha y hora se borren de la memoria.  
En ese caso, cargue la batería recargable  
incorporada y ajuste la fecha y hora  
3
4
Ajuste [HORA VERANO] y, a  
continuación, toque [SIGUIENTE].  
Ajuste [A] (año) mediante v/V.  
nuevamente.  
• Después de encender la videocámara, tarda unos  
cuantos segundo en estar lista para tomar  
imágenes. No es posible utilizar la videocámara  
durante este período.  
min  
A
1
M
1
D
12  
AM  
• Con el fin de ahorrar energía de la batería,  
cuando se adquiere la videocámara, ésta viene  
ajustada para apagarse automáticamente si se  
deja encendida sin realizar ninguna operación  
durante unos 5 minuto ([APAGADO AUTO]).  
AJUS.RELOJ  
SIGUIENTE  
5
6
7
Seleccione [M] mediante b/B y, a  
continuación, ajuste el mes  
mediante v/V.  
z Sugerencias  
• La fecha y la hora no aparecen durante la  
grabación, aunque se graban automáticamente  
en el disco y se pueden mostrar durante la  
reproducción ([CÓDIGO DATOS]).  
• Si los botones del panel táctil no funcionan  
correctamente, ajuste la pantalla LCD  
([CALIBRACIÓN]).  
Ajuste [D] (día), las hora y los  
minuto del mismo modo y, a  
continuación, toque [SIGUIENTE].  
Cambio del ajuste de idioma  
Compruebe que el reloj esté  
correctamente ajustado y, a  
Puede modificar las indicaciones en  
pantalla para que muestren los mensajes en  
un idioma determinado.  
continuación, toque  
.
El reloj empezará a funcionar.  
Toque  
(HOME) t  
(AJUSTES)t[AJ.REL./  
IDIOM. ]t[ AJUSTE IDIOMA] y, a  
continuación, seleccione el idioma deseado.  
Puede seleccionar cualquier año hasta  
2037.  
Para apagar la videocámara  
Deslice el interruptor POWER hacia la  
posición OFF (CHG).  
127  
Paso 4: Preparación para grabación  
Para desactivar la luz de fondo de la  
Apertura de la tapa del objetivo  
pantalla LCD y conseguir que la  
batería dure más tiempo  
(DCR-DVD308/DVD708)  
Deslice el interruptor LENS COVER hasta  
la posición OPEN.  
Mantenga presionado DISP/BATT INFO  
durante unos s (segundo) hasta que  
aparezca  
.
Este ajuste resulta práctico cuando utiliza la  
videocámara en condiciones de mucho  
brillo o si desea ahorrar energía de la  
batería. Este ajuste no afectará a la imagen  
grabada. Para encender la luz de fondo de la  
pantalla LCD, mantenga presionado DISP/  
BATT INFO durante unos s (segundo)  
Cuando haya finalizado la grabación, ajuste  
el interruptor LENS COVER en la posición  
CLOSE para cerrar la tapa del objetivo.  
hasta que  
desaparezca.  
b Notas  
Panel LCD  
• No pulse los botones del marco de la pantalla  
LCD cuando abra o ajuste el panel.  
Abra el panel LCD 90 grados respecto a la  
videocámara (1) y, a continuación, gírelo  
en el ángulo que le resulte más adecuado  
para grabar o reproducir (2).  
z Sugerencias  
• Si abre el panel LCD 90 grados respecto de la  
videocámara y lo gira 180 grados hacia el  
objetivo, podrá cerrarlo con la pantalla LCD  
mirando hacia fuera. Este procedimiento resulta  
conveniente para las operaciones de  
reproducción.  
190 grados respecto  
a la videocámara  
290 grados  
(máx.)  
• En el HOME MENU, toque  
(AJUSTES)  
t [AJUS.SON./PANT.] t [BRILLO LCD]  
para ajustar el brillo de la pantalla LCD.  
• Cada vez que presiona DISP BATT/INFO, se  
muestra u oculta la información (mostrar y no  
mostrar).  
DISP/BATT INFO  
2180 grados  
(máx.)  
128  
Paso 5: Inserción de  
un disco o un  
“Memory Stick Duo”  
Visor  
Podrá contemplar las imágenes a través del  
visor para evitar que la batería se desgaste,  
o siempre que la calidad de la imagen de la  
pantalla LCD sea muy baja.  
Disco  
Se necesita un disco DVD-RW, DVD+RW,  
DVD-R o DVD+R DL de 8 cm nuevo para  
realizar la grabación.  
Visor  
b Notas  
• Elimine de antemano el polvo o las huellas  
dactilares del disco con un paño suave.  
1
2
Compruebe que la videocámara  
esté encendida.  
Palanca de ajuste del  
objetivo del visor  
Muévala hasta que vea  
claramente la imagen.  
Deslice el interruptor OPEN de la  
cubierta del disco en la dirección  
de la flecha (OPEN B).  
z Sugerencias  
• Para ajustar el brillo de la luz de fondo del visor,  
[ABRIENDO…] aparece en la pantalla  
LCD.  
seleccione  
(AJUSTES) t [AJUS.SON./  
PANT.] t [LUZ F.VISOR] en el HOME  
MENU.  
La cubierta del disco se abrirá  
ligeramente de forma automática.  
Interruptor OPEN de  
la cubierta del disco  
Lente de  
captación  
Indicador  
ACCESS (disco)  
Cuando la cubierta  
del disco se haya  
abierto un poco,  
podrá abrirla  
completamente.  
Continúa ,  
129  
Paso 5: Inserción de un disco o un “Memory Stick Duo” (continuación)  
3
Coloque el disco con la cara de  
grabación hacia la videocámara y,  
a continuación, presione el centro  
del disco hasta que encaje en su  
sitio.  
5
Elija la opción que desee de las  
que aparecen en pantalla.  
x DVD-RW  
Seleccione el formato de grabación,  
[VIDEO] o [VR] y, a continuación,  
toque  
.
x DVD+RW  
Seleccione el formato de la película  
[PANORÁM.16:9] o [4:3] y, a  
continuación, toque  
.
6
7
Toque [SÍ].  
Cuando aparezca [Finalizado.] en  
la pantalla, toque  
.
Coloque la cara impresa del disco hacia  
afuera cuando utilice discos de una sola cara.  
Cuando se haya completado el formateo  
del disco, podrá empezar a grabar en él.  
4
Cierre la cubierta del disco.  
[ACCESO A DISCO] aparece en la  
pantalla LCD.  
z Sugerencias  
• Si utiliza un disco DVD-RW mientras la  
videocámara está ajustada para que  
funcione en el modo Easy Handycam, se  
le asignará automáticamente el modo de  
grabación VIDEO.  
Es posible que la videocámara tarde un  
tiempo en reconocer el disco.  
x DVD-RW/DVD+RW  
Aparecerá una pantalla en la que se le  
solicita si desea utilizar la [GUÍA  
SELEC.DISCO]. Si utiliza la [GUÍA  
SELEC.DISCO] podrá formatear el  
disco siguiendo las indicaciones en  
pantalla. Si no desea utilizarla, salte al  
paso 5.  
Extracción del disco  
1 Realice los pasos 1 y 2 para abrir la  
cubierta del disco.  
2 Presione la zona de sujeción del disco en el  
centro del compartimiento para discos y  
extraiga el disco sujetándolo por el borde.  
x DVD-R/DVD+R DL  
Podrá empezar a grabar inmediatamente  
después que el indicador [ACCESO A  
DISCO] desaparezca de la pantalla  
LCD. No es necesario que realice los  
pasos posteriores al 5.  
130  
 
z Sugerencias  
• Es posible expulsar un disco siempre que la  
videocámara esté conectada a una fuente de  
alimentación, aunque se encuentre apagada. No  
obstante, el proceso de reconocimiento del disco  
(paso 4) no se iniciará.  
• Compruebe cuál es el disco más adecuado para  
la grabación que desea realizar mediante la  
opción [GUÍA SELEC.DISCO] del HOME  
MENU.  
“Memory Stick Duo”  
b Notas  
Sólo se puede utilizar un “Memory Stick  
• Al abrir o cerrar la cubierta del disco, tenga  
cuidado de no obstaculizar la operación con la  
mano u otros objetos. Coloque la correa en la  
parte inferior de la videocámara y, a  
Duo” con la marca  
o
.
z Sugerencias  
continuación, abra o cierre la cubierta del disco.  
• El número de imágenes que pueden grabarse  
varía en función de la calidad o el tamaño de la  
imagen.  
• Es posible que se produzcan fallos en el  
funcionamiento de la videocámara si la correa  
queda enganchada al cerrar la cubierta del disco.  
• No toque la cara de grabación del disco ni la  
lente de captación.  
Cuando utilice un disco de doble cara, tenga  
cuidado de no ensuciar la superficie con huellas  
dactilares.  
• Es posible que se produzcan fallas en el  
funcionamiento de la videocámara si cierra la  
cubierta del disco con éste insertado  
incorrectamente.  
• No desconecte la alimentación durante el  
proceso de formateo.  
1
2
Abra el panel LCD.  
Inserte el “Memory Stick Duo” en  
la ranura para “Memory Stick  
Duo” en la dirección correcta  
hasta que haga clic.  
• No someta la videocámara a golpes ni  
vibraciones en las siguientes situaciones:  
– mientras el indicador ACCESS esté  
encendido;  
– mientras el indicador ACCESS esté  
parpadeando;  
– mientras se muestre [ACCESO A DISCO] o  
[ABRIENDO…] en la pantalla LCD.  
• Es posible que se tarde algún tiempo en expulsar  
el disco según las condiciones de éste y los  
materiales grabados.  
Indicador Access  
(“Memory Stick Duo”)  
• Es posible que la operación de expulsión de un  
disco tarde hasta 10 minuto si éste está dañado o  
sucio de huellas dactilares, etc. En ese caso, es  
posible que el disco esté dañado.  
Continúa ,  
131  
Paso 5: Inserción de un disco o un “Memory Stick Duo” (continuación)  
Para expulsar un “Memory Stick Duo”  
Empuje ligeramente el “Memory Stick  
Duo” hacia el interior de la ranura una vez  
y, a continuación, deslícelo fuera de ésta.  
b Notas  
• No intente extraer el “Memory Stick Duo” a la  
fuerza. Si lo hace, podría provocar fallas de  
funcionamiento.  
• Cuando el indicador de acceso se enciende o  
parpadea, significa que la videocámara está  
leyendo o grabando datos. No sacuda ni golpee  
la videocámara, desconecte la alimentación,  
expulse el “Memory Stick Duo” ni retire la  
batería. Si lo hace, los datos de imágenes  
podrían dañarse.  
• Si ingresa el “Memory Stick Duo” en la ranura  
en la dirección incorrecta, es posible que se  
dañen el “Memory Stick Duo”, la ranura para  
“Memory Stick Duo” o los datos de imágenes.  
132  
Grabación  
Interruptor POWER A  
(HOME) E  
DCR-DVD108/DVD608  
Abra la tapa  
del objetivo  
PHOTO F  
(HOME) D  
START/STOP  
C
DCR-DVD308/DVD708  
(HOME) D  
START/STOP  
C
START/STOP B  
b Notas  
Ajuste de la correa de sujeción  
• Si los indicadores de acceso permanecen  
encendidos una vez finalizada la grabación,  
significa que todavía se están grabando datos en  
el disco o en el “Memory Stick Duo”. No  
someta la videocámara a golpes o vibraciones,  
ni desconecte la batería o el adaptador de  
alimentación de ca  
Ajuste la correa de sujeción como muestra  
la ilustración y sujete la videocámara  
correctamente.  
Continúa ,  
133  
Grabación (continuación)  
Películas  
Imágenes fijas  
Las películas se graban en el disco.  
Las imágenes fijas se graban en el  
“Memory Stick Duo”.  
1
2
Gire el interruptor  
POWER A hasta  
que se encienda  
el indicador  
1
Gire el interruptor  
POWER A hasta  
que se encienda  
el indicador  
(película).  
(imágenes fijas).  
Presione START/STOP B (o C).  
2
Presione PHOTO F.  
min  
1,0M  
min  
ParpadeatSe enciende  
[ESPERA]t[GRAB.]  
Presiónelo  
ligeramente para  
enfocar  
Presiónelo  
completamente  
para grabar  
Para detener la grabación, presione  
START/STOP nuevamente.  
aparece junto a  
. Cuando  
desaparece, significa que se grabó la  
imagen.  
Para cambiar al modo de grabación  
de películas mediante el botón  
(HOME) D (o E)  
Toque  
(TOMA DE IMÁGENES) en  
el menú HOME MENU t [PELÍCULA] o  
[FOTO].  
134  
Reproducción  
Palanca de zoom F  
DCR-DVD108/DVD608  
Interruptor  
POWER A  
(HOME)  
D
(HOME) E  
(VISUALIZAR  
IMÁGENES) C  
(VISUALIZAR IMÁGENES) B  
DCR-DVD308/  
DVD708  
(HOME) D  
Gire el interruptor POWER A para encender la videocámara.  
Presione  
(VISUALIZAR IMÁGENES) B (o C).  
La pantalla VISUAL INDEX aparece en la pantalla LCD. (Es posible que el sistema  
tarde un tiempo en mostrar la pantalla VISUAL INDEX).  
Vuelve a la pantalla de  
grabación  
Tipo de disco  
6 imágenes  
anteriores  
Aparece con la imagen en la  
última lengüeta reproducida  
6 imágenes  
posteriores  
o grabada (B para una  
imagen fija).  
Vuelve a la pantalla  
de grabación  
(OPTION)  
Muestra las películas  
Muestra las imágenes fijas  
z Sugerencias  
• Si mueve la palanca del zoom F podrá seleccionar si desea mostrar 6 ó 12 imágenes en la pantalla  
VISUAL INDEX. Para fijar el número, toque  
(AJUSTES) en el HOME MENU t [VIS.AJUSTES  
IMÁG] t [PANTALLA ].  
Continúa ,  
135  
Reproducción (continuación)  
Inicie la reproducción.  
Películas  
Toque la lengüeta  
y la película que desee reproducir.  
La pantalla VISUAL INDEX volverá a aparecer cuando se haya completado la  
reproducción de la secuencia entre la película seleccionada y la última película.  
Volver (a la pantalla  
Alterna el modo de  
VISUAL INDEX)  
reproducción y de pausa  
cada vez que se toca.  
Principio de la escena/  
escena anterior  
Escena siguiente  
Detener (ir a la pantalla  
VISUAL INDEX)  
(OPTION)  
Rebobinado/avance rápido  
Imágenes fijas  
Toque la lengüeta  
y la imagen fija que desee reproducir.  
Volver (a la pantalla  
VISUAL INDEX)  
min  
1,0M  
Botón de presentación de  
diapositivas  
(OPTION)  
Ir a la pantalla  
VISUAL INDEX  
Anterior/Siguiente  
z Sugerencias  
• Toque  
reproducir la película en cámara lenta.  
• Si toca dichos botones una vez, el rebobinado o  
el avance rápido irán unas 5 veces más rápido y,  
si los toca 2 veces, aumentará la velocidad  
aproximadamente 10 veces*.  
Cambio al modo de reproducción  
/
durante la pausa para  
mediante el botón  
(HOME) D (o  
E)  
Toque  
(VISUALIZAR IMÁGENES)  
t [VISUAL INDEX]  
Ajuste del volumen de la película  
*
Unas 8 veces más rápido si utiliza un DVD+RW  
Toque  
(OPTION) t lengüeta  
t
[VOL.] y, a continuación, ajústelo con  
.
/
136  

Westcott 1875 User Manual
Vista Davis &amp; Sanford ATPX10 User Manual
Ultra Products ATX Cases Defender User Manual
Toshiba TEC MA 1600 100 User Manual
Tokina Monofocal Len TC0812 User Manual
Technicolor Thomson Camcorder CAMERA TTV 1707 User Manual
Sterling Allen Bradley 015 User Manual
Sony HDR CX560 User Manual
Samsung MCD MP67 User Manual
Royal Consumer Information Products ALPHA9155SC User Manual