Sony Discman D E401 User Manual

zOt h e r Op e ra t io n s  
To  
Press  
Pla yin g t ra cks in ra n d o m  
o rd e r (Sh u ffle Pla y)  
3-861-764-24 (1)  
Usin g o t h e r fu n ct io n s  
Pause (main unit  
only)  
^
Pla yin g t ra cks re p e a t e d ly  
(Re p e a t Pla y)  
To m in im ize skip p in g (ESP2)  
Playing a CD right  
away!  
The ESP (Electronic Shock Protection)  
function minimize skipping by using a buffer  
memory that stores music data and plays it  
back in the event of a shock.  
You can play the tracks in a CD in random  
order.  
Resume play after  
pause (main unit  
only)  
^
You can play tracks repeatedly in normal,  
INTRO PGM, shuffle or RMS (Random Music  
Sensor) play modes. Repeat all the tracks or  
only one track.  
PLAY  
MODE  
The new ESP2 (ESP Squared) system uses a  
new DSP (Digital Signal Processor) which can  
read and store music data more efficiently,  
providing a level of continuous skip  
protection not found in traditional buffer  
memory units. This decreases the frequency  
of sound skipping and the need to utilize the  
buffer memory. Use this function when  
listening in a car or while walking.*  
Find the beginning  
of the current track  
(AMS*)  
=once**  
=repeatedly**  
+ once**  
+ repeatedly**  
If you want to play a CD right now, choose to use your player on house  
current. Other choices are the following three: rechargeable battery, dry  
batteries (see “Power Sources” on the reverse side) and car battery.  
Find the beginning  
of previous tracks  
(AMS)  
Co m p a ct Disc  
During play, press PLAY MODE repeatedly  
until “SHUF” appears.  
The tracks play in random order.  
Co m p a ct Pla ye r  
* Although ESP2 provides excellent protection  
against skipping, it will not prevent skipping  
while jogging or running.  
Find the beginning  
of the next track  
(AMS)  
REPEAT/  
ENTER  
PLAY  
MODE  
1
Connect  
To re p e a t a ll t h e t ra cks  
Press REPEAT/ ENTER during play.  
The “ ” indication appears.  
Find the beginning  
of succeeding  
tracks (AMS)  
Operating Instructions  
ESP  
to a wall  
outlet  
Ab o u t a re a co d e  
To cancel shuffle play, press PLAY MODE  
repeatedly until the play mode indication  
disappears from the display.  
The area code of the player you purchased is shown on upper left of the bar  
code label on the package.  
For accessories supplied with your player, check the area code of your model  
and refer to “Supplied accessories” toward the end of this manual.  
Go forward  
quickly  
Hold down  
+**  
When using  
earphones  
Note  
Go backwards  
quickly  
Hold down  
=**  
• During shuffle play, you cannot return to  
previous tracks by pressing = .  
Press ESP.  
The ESP indication appears.  
To cancel repeat play, press REPEAT/ ENTER  
again.  
*AMS = Automatic Music Sensor  
**These operations are possible during both  
play and pause.  
AC power adaptor  
To re p e a t a sin g le t ra ck  
1 Press REPEAT/ ENTER while the track you  
want to repeat is playing.  
To re m o ve t h e CD  
Remove the CD while pressing the pivot.  
Pla yin g t ra cks in t h e o rd e r  
yo u w a n t (RMS p la y)  
The “  
” indication appears.  
To release the ESP function, press ESP again.  
Earphones  
or  
DC IN 4.5 V  
Notes  
Headphones*  
• Playing may stop when the player gets a strong  
shock even with the ESP function on.  
• You may hear a noise or sound skip when:  
— listening to a dirty or scratched CD,  
— listening to an audio test CD or,  
— the player receives continuous shock.  
• Sound may drop for a while if you press ESP  
during play.  
You can program up to 22 tracks to play in  
any order you choose.  
D-E400  
D-E400AN  
D-E401  
D-E403  
2 Press PLAY MODE repeatedly until “1”  
appears.  
D-E400HR  
D-E401SR  
D-E405  
^
PLAY  
MODE  
D-E406CK  
To e n jo y m o re p o w e rfu l b a ss so u n d  
(So u n d fu n ct io n )  
You can enjoy a powerful bass-boosted  
sound.  
*U2 model supplied  
with headphones.  
2/REMOTE  
REPEAT/  
ENTER  
D-E409CK  
To repeat another track, press = or + .  
=/ +  
For models supplied w ith the AC plug adaptor  
If the AC power adaptor does not fit the wall outlet, use the AC plug adaptor.  
Notes on controlling the volume w ith  
the remote control  
Set the VOL (volume) control on the remote  
control to MAX. Then adjust the volume on the  
player to the level that you want to be the  
maximum volume of the remote control.  
To cancel repeat play, press REPEAT/ ENTER  
again.  
Sony Corporation 1998  
1
2
During play, press PLAY MODE  
repeatedly until “RMS*flashes.  
For models supplied w ith the remote control  
• Connect the plug of the earphones/ headphones to the remote control, not to the 2/  
REMOTE jack of the player.  
• Connect the earphones/ headphones to the remote control firmly. A loose connection may  
cause noise during playback.  
INFORMATION  
We lco m e !  
Notes on display  
Pla yin g o n ly t h e t ra cks  
yo u w a n t (INTRO PGM Pla y)  
SOUND  
• When you press ^ or ( (when RESUME  
is set to OFF), the total number of tracks in  
the CD and the total playing time appear for  
about 2 seconds.  
• During play, the track number and the  
elapsed playing time of the current track  
appear.  
• During pause, the elapsed playing time  
flashes in the display.  
• Between tracks, the time to the beginning of  
the next track will appear with the “–”  
indication.  
Listening for many hours at maximum  
volume may damage your hearing.  
Flashing  
Thank you for purchasing the Sony  
Compact Disc Compact Player.  
Before operating your player, please  
read this manual and retain it for  
future reference.  
Press SOUND to select “MB (Mega Bass)” or  
“GRV (Groove).” “GRV” is more effective.  
*RMS = Random Music Sensor  
Fo r t h e cu st o m e rs in t h e USA  
This equipment has been tested and found to  
comply with the limits for a Class B digital  
device, pursuant to Part 15 of the FCC Rules.  
These limits are designed to provide reasonable  
protection against harmful interference in a  
residential installation. This equipment  
generates, uses, and can radiate radio frequency  
energy and, if not installed and used in  
accordance with the instructions, may cause  
harmful interference to radio communications.  
However, there is no guarantee that interference  
will not occur in a particular installation. If this  
equipment does cause harmful interference to  
radio or television reception, which can be  
determined by turning the equipment off and on,  
the user is encouraged to try to correct the  
interference by one or more of the following  
measures:  
- Reorient or relocate the receiving antenna.  
- Increase the separation between the equipment  
and receiver.  
- Connect the equipment into an outlet on a  
circuit different from that to which the receiver  
is connected.  
- Consult the dealer or an experienced radio/ TV  
technician for help.  
You are cautioned that any changes or  
modifications not expressly approved in this  
manual could void your authority to operate this  
equipment.  
You can choose and play your favorite tracks  
by scanning through the beginning of each  
track in a CD.  
2
3
Place a CD  
Press = or + to choose a track.  
The track number and the playing order  
appear.  
Note  
• If the sound is distorted when emphasizing  
bass, turn down the volume.  
Ab o u t t h is m a n u a l  
^
PLAY  
MODE  
The instructions in this manual are for the  
D-E400, D-E400AN, D-E400HR, D-E401,  
D-E401SR, D-E403, D-E405, D-E406CK and  
D-E409CK. Before you start reading, check your  
model number.  
Flashing  
To lo ck t h e b u t t o n s  
You can lock your player against any  
accidental operations.  
You can still operate the player with the  
remote control.  
Track number  
OPEN  
Notes on handling CDs  
• To keep the CD clean, handle it by its edge.  
Do not touch the surface.  
• Do not stick paper or tape onto the CD.  
• Do not expose the CD to direct sunlight or  
heat sources such as hot air ducts. Do not  
leave the CD in a car parked under direct  
sunlight.  
The D-E400AN is the model used for illustration  
purposes.  
REPEAT/  
ENTER  
Playing order  
+
Ow n e r’s Re co rd  
3
4
5
Press REPEAT/ ENTER to program the  
track.  
1
During play, press PLAY MODE  
repeatedly until “INTRO PGM” flashes.  
The model and the serial numbers are located at  
the bottom. Record these numbers in the spaces  
provided below. Refer to them whenever you  
call upon your Sony dealer regarding this  
product.  
Flashing  
Repeat steps 2 and 3 to program the  
remaining tracks.  
Label side up  
Press ^ .  
1Press OPEN to open the lid.  
2Fit the CD to the pivot.  
Model No. __________ Serial No.__________  
HOLD  
“RMS” stops flashing and the tracks you  
have chosen play in the order you  
specified.  
2
3
Press ^ to start scanning .  
The player plays about the first 15  
seconds of each track and “INTRO PGM”  
flashes faster.  
WARNING  
If you press p, the program will be erased.  
To prevent accidental erasure, set the  
RESUME switch to ON.  
Slide HOLD in the direction of the arrow.  
When you press any button, “Hold” appears in  
the display and you cannot operate the player.  
To p re ve n t fire o r sh o ck  
h a za rd , d o n o t e xp o se  
t h e u n it t o ra in o r  
m o ist u re .  
Play  
Press REPEAT/ ENTER while the track  
you want is playing. To skip the track,  
press + or just wait for the next track.  
To cancel RMS play, press PLAY MODE until  
“RMS” disappears.  
To unlock, slide HOLD back.  
Fo r t h e cu st o m e rs in Au st ra lia  
The supply cord of the AC power adaptor cannot  
be replaced; if the cord is damaged, the AC  
power adaptor should be discarded.  
1 Press ^.  
After you have gone through the CD, “INTRO  
PGM” stops flashing and the tracks you have  
chosen play automatically.  
To ch e ck t h e p ro g ra m  
During programming:  
Press REPEAT/ ENTER before step 5.  
During RMS play:  
Press PLAY MODE repeatedly until “RMS”  
flashes, then press REPEAT/ ENTER.  
Each time you press REPEAT/ ENTER, the  
track number and the playing order appear in  
the order you specified.  
Not these ways  
To a vo id e le ct rica l  
sh o ck, d o n o t o p e n t h e  
ca b in e t . Re fe r se rvicin g  
t o q u a lifie d p e rso n n e l  
o n ly.  
Continue to the reverse side m  
Fo r t h e cu st o m e rs n o t in Po la n d  
To finish programming before going through  
the whole CD, press ^. The selected tracks  
will be played.  
The  
mark on the unit is valid only for  
products marketed in Poland.  
If you press p, the program will be erased.  
To prevent accidental erasure, set the  
RESUME switch to ON.  
Fo r t h e cu st o m e rs n o t in Eu ro p e  
The CE mark on the unit is valid  
only for products marketed in the  
European Union.  
CAUTION  
Note  
The use of optical instruments with this product  
will increase eye hazard.  
2 Adjust the volume.  
• If you program another track after the 22nd  
track, the first track programed is cleared and  
the new track is programed instead.  
To cancel INTRO PGM play, press PLAY  
MODE repeatedly until the play mode  
indication disappears from the display.  
Fo r t h e cu st o m e rs n o t in Ru ssia  
To stop play, press p.  
The  
mark on the unit and package is valid  
only for products marketed in Russia.  

Taylor AM 1700 BL User Manual
Sunbeam Blender PB2000 User Manual
Sony TRV18 User Manual
Sony Handycam HDR XR350VE User Manual
Sony Handycam HDR SR12E User Manual
Sony CDX L450V User Manual
Sony CDX 1000RF User Manual
Sony Camcorder DCR TRV11 User Manual
Sony ACTIVE SUBWOOFER SA W3800 User Manual
Siemens Operating Control and Monitoring Devices 270 User Manual