3-206-359-12(1)
Digital Camcorder
Operating Instructions
Before operating the unit, please read this manual
thoroughly and retain it for future reference.
Note
The supplied CD-ROM includes operation manuals for
the DSR-370/570WS series of digital camcorders
(English, Japanese, French, German, Italian and
Spanish versions).
For more details, see page 14 “Using the CD-ROM
Manual.”
DSR-370L/370PL
DSR-370K1/370PK1
DSR-370K2/370PK2
DSR-570WSL/570WSPL
2001 Sony Corporation
Table of Contents
Chapter 1
Overview
Product Configurations ....................................................9
Features ...........................................................................10
Features of the DSR-370/370P/570WS/570WSP Camera
Section.......................................................................... 10
Features of the DSR-570WS/570WSP Camera Section ... 12
Features of VCR Section ................................................... 12
Other Features ................................................................... 13
Using the CD-ROM Manual.............................................14
CD-ROM System Requirements ....................................... 14
Preparations ....................................................................... 14
To Read the CD-ROM Manual.......................................... 14
Location and Function of Parts .....................................15
Front View ......................................................................... 15
Right Side View ................................................................. 16
Left and Upper View ......................................................... 26
Rear and Bottom................................................................ 28
VCL-716BX Zoom Lens (for DSR-370K2/370PK2) ....... 30
VCL-719BX Zoom Lens (for DSR-370K1/370PK1) ....... 32
DXF-801/801CE Viewfinder............................................. 35
Chapter 2
Inserting and Replacing the Lithium Battery ...............37
Fitting the Lens ...............................................................39
Using Accessories ..........................................................41
Using the Viewfinder ......................................................... 41
Fitting the 5-inch Electronic Viewfinder ........................... 42
Fitting to a Tripod.............................................................. 42
Using an Optional Microphone ......................................... 43
Using a Video Light........................................................... 44
Fitting the Shoulder Strap ................................................. 45
Connecting to Audio System............................................. 46
Connecting a CA-370 Intercom Adaptor .......................... 48
Using the Optional LC-DS500 Carrying Case .................. 49
Using the Optional LC-DS300SFT Soft Carrying Case ... 49
Fitting and
Connections
Table of Contents
3
Table of Contents
Chapter 2
Connections ....................................................................50
Connecting a Number of Camcorders ............................... 50
Connecting an External VCR ............................................ 51
Connecting an i.LINK Digital Cassette Recorder ............. 51
Connecting a Camera Control Unit ................................... 52
Power Supply...................................................................53
Fitting and
Connections
(Continued)
Using a BP-L40/L40A/L60/L60A/L90/L90A/M50/M100
Battery Pack ................................................................. 53
Using an AC Adaptor ........................................................ 55
Using the Anton Bauer Intelligent Battery System ........... 55
Chapter 3
Shooting
Basic Procedure for Shooting........................................57
Using DynaLatitude Function ........................................... 58
Recording ........................................................................59
Usable Cassettes ................................................................ 59
Recording on the Internal VCR ......................................... 60
Recording External Video Signals..................................... 64
Recording on an External VCR Using the VTR/CCU
Connector (26-pin) or DV OUT Connector ................. 64
Back Space Editing .........................................................67
Starting Back Space Editing at Any Tape Position ........... 67
Using the Edit Search Function While Back Space
Editing .......................................................................... 68
Using the Freeze Mix Function ......................................... 69
Playback — Checking Recorded Contents ...................70
Checking the Recorded Contents Immediately After
Shooting — Recording Review.................................... 70
Viewing Monochrome Playback in the Viewfinder........... 70
Viewing Color Playback.................................................... 70
Setting Time Values .........................................................71
Setting the User Bit Value ................................................. 72
Setting the Time Code Value ............................................. 73
Synchronization With External Time Code Signals
— Gen-Lock ................................................................ 75
ClipLink Shooting ...........................................................77
Setting Editing Points While Shooting.............................. 79
Resuming Recording in ClipLink Mode ........................... 81
4
Table of Contents
Chapter 4
Viewfinder Screen Indications .......................................85
Changing the Viewfinder Display ..................................... 85
Viewfinder Normal Indications.......................................87
Status Indications .............................................................. 90
Viewfinder Basic Menu ...................................................92
Basic Menu Operations ..................................................... 92
Contents and Settings of Each Menu Page........................ 92
Viewfinder Advanced Menu............................................98
Advanced Menu Operations .............................................. 98
Contents and Settings of Each Menu Page...................... 100
Viewfinder Screen
Indications and
Menus
Video Output and Viewfinder Picture (DSR-570WS/
570WSP only) ............................................................ 107
Setup Files .....................................................................108
Calling up a Setup File .................................................... 108
Changing File Settings .................................................... 110
Saving File Settings......................................................... 110
Using SetupNavi and SetupLog...................................113
Setting Up the Camera Using Data Recorded on Tape ... 113
Recording the Menu Settings Onto a Tape...................... 114
Viewing SetupLog Data .................................................. 115
Chapter 5
Adjustments and
Settings
Setting on the VCR Section — VCR Menu...................117
VCR Menu Operation ....................................................118
Basic Operation ............................................................... 118
Menu 101 Setting the Real Time Clock and Calendar ... 119
Menu 201 Checking the Total Operating (Power-On)
Hours .......................................................................... 119
Menu 204 Selecting Frame Mode (DF/NDF) for Time
Code (for DSR-370/570WS only).............................. 119
Menu 206 Selecting Battery Capacity Indication .......... 120
Menu 207 Setting Standby-On Period ........................... 120
Menu 210 Using Auto-Check Function .......................... 121
Menu 211 Selecting ClipLink Function ......................... 123
Menu 212 Selecting Audio Recording Mode ................. 123
(Continued)
Table of Contents
5
Table of Contents
Chapter 5
Menu 213 Selecting Audio Reference Level.................. 124
Adjustments and
Settings (Continued)
Menu 214 Setting Fade-In/Fade-Out for the Audio
Recording Start and Stop Points ................................ 124
Menu 220 Using Setup Add
(for DSR-370/570WS only) ....................................... 125
Menu 221 Using Setup Remove
(for DSR-370/570WS only) ....................................... 125
White Balance Adjustment ...........................................126
Saving an Appropriate White Balance Value in
Memory ...................................................................... 126
Using the Preset White Balance Settings ........................ 127
Light Sources and Color Temperature............................. 128
Using the ATW (Auto Tracing White Balance)
Function ..................................................................... 128
Black Balance Adjustment ...........................................129
Shutter Settings ............................................................130
Viewfinder Screen Adjustments ..................................132
Adjusting the Lens ........................................................133
Flange Focal Length Adjustment .................................... 133
Iris Adjustments............................................................... 134
Adjusting the Iris Sensitivity ........................................... 135
Macrophotography .......................................................... 135
Settings for Special Cases ...........................................137
Skin Detail Correction..................................................... 138
Adjusting Color in the Specified Area ............................ 138
Appendix
Important Notes on Operation .....................................139
Characteristics of CCD Sensors ...................................... 140
Cleaning the Video Heads ............................................141
Warning System ............................................................142
Condensation ................................................................... 143
Troubleshooting ............................................................144
Specifications ................................................................146
Related Products.............................................................. 149
6
Table of Contents
Appendix
(Continued)
Chart of Optional Components and Accessories ......151
What Is ClipLink? ..........................................................152
How ClipLink Changes Video Production Techniques ... 152
ClipLink Operation Flow ...............................................153
Example System Configuration ...................................... 153
Data Generated When Shooting ...................................... 154
Glossary.........................................................................157
Table of Contents
7
Chapter
1
Overview
Product Configurations
The eight models, DSR-370L/370PL, DSR-370K1/
370PK1/, DSR-370K2/370PK2/ and DSR-570WSL/
570WSPL, comprise both NTSC and PAL versions
and the components as shown in the figure below.
The operation of the basic camcorder is the same in all
cases.
DSR-370K1/370PK1/370K2/370PK2
DSR-370L/370PL/570WSL/570WSPLc)
VCT-U14 Tripod
Adaptor
Microphone
DXF-801/801CE Viewfindera)
Switch guardb)
VCL-716BX Zoom Lens
(for DSR-370K2/370PK2)
Test chart for flange focal
length adjustment
Shoulder strap
• Lens mount cap
• Binding tie
• Operating instructions
VCL-719BX Zoom Lens
(for DSR-370K1/370PK1)
DSR-370/370P/570WS/
570WSP Camcorder
a)Part No. A-8279-329-A (for DSR-370/570WS)
Part No. A-8326-150-A (for DSR-370P/570WSP)
b)The switch guard can be removed. (See page 15.)
c) Use an optional zoom lens with the DSR-570WS/570WSP.
Chapter 1 Overview
9
Features
DCC+ (dynamic contrast control plus)
Prevents white breakup when shooting a high intensity
subject, and also prevents color faults in high intensity
subject.
The DSR-370/370P is a 4:3 standard screen type
digital camcorder. The DSR-570WS/570WSP is a 16:9
wide screen type (4:3/16:9 switchable) digital
camcorder.
The performance of the Camcorder CCDs is as
follows.
Black stretch and compress
Enables control of luminance signal levels in black
areas without changing the hue.
DSR-370/370P
1
/
2-inch IT type Power HAD CCD
Variety of detail corrections
The DSR-370/370P uses 1/2-inch IT type Power HAD
CCDs which excel in reduction of smear, sensitivity
and picture quality.
• Smear: –110 dB
• Sensitivity: F11.0 (at 3200 K, 2000 lux)
• S/N: 62 dB
• Skin detail function: this function gives a slightly
softer appearance to the subject’s face. The target
skin color can be automatically set.
• Black halo correction
• Red/green vertical detail correction: this function
performs vertical detail compensation for both red
and green signals.
DSR-570WS/570WSP
2
/
3-inch IT type Power HAD CCD
• Horizontal detail frequency control
The DSR-570WS/570WSP uses 2/3-inch IT type
Power HAD CCDs with 520,000 pixels which excel in
picture quality and sensitivity.
New Functions boost operability
• Smear: –120 dB
• Sensitivity: F11.0 (at 3200 K, 2000 lux)
• S/N: 63 dB
EZ (easy) mode function
When there isn’t time to check the camcorder settings,
simply press the EZ mode button to start the auto
adjustment function using standard settings. There is
no need to lose a shot for lack of setup time.
Features of the DSR-370/370P/
570WS/570WSP Camera Section
EZ (easy) focus
Press the EZ focus button before shooting to ensure a
Following are common features of the DSR-370/370P
and DSR-570WS/570WSP camera section.
quick and accurate focus.
Dual pixel readout (DPR1))
For more information about the DSR-570WS/570WSP, see
“Features of the DSR-570WS/570WSP Camera Section” on
page 12.
When the gain is set to either 18 dB or 24 dB, the gain
setting can be doubled (6 dB up) without increasing
the noise level.
Programmable gain
Sophisticated image processing
The amount of gain relative to the GAIN switch setting
(H, M, or L) can be programmed as –3 dB, 0 dB, 3
dB, 6 dB, 9 dB, 12 dB, 18 dB, 18 dB+DPR, 24 dB,
24 dB+DPR and hyper gain.
TruEye™ processing makes the following
performance features possible. This digital signal
processing has brought reproduction of natural colors
to the level achieved by the human eye.
Hyper gain
Hyper gain (36 dB , or about 60 times greater than 0
dB (about 120 times greater for DSR-570WS/570WSP
only)) can be easily set via one switch setting. This can
also be done from remote equipment.
DynaLatitude™
Enables detailed adjustment of contrast control in each
pixel in accordance with a histogram of luminance
signal levels (see page 58).
..........................................................................................................................................................................................................
1) DPR = Dual Pixel Readout
10
Chapter 1 Overview
Auto tracing white balance (ATW)
1-kHz reference signal output
Along with a color bar, a 1-kHz reference signal can
also be output.
This function automatically traces the white balance,
which constantly changes as lighting conditions
change. Auto tracing white balance is especially
useful when there is no time to manually adjust the
white balance or when shooting moves between indoor
and outdoor locations.
Freeze mix function
The freeze mix function superimposes any previously
recorded still picture on the viewfinder screen to
facilitate framing the subject when reshooting the
scene.
Total level control system (TLCS)
Even if the incoming light exceeds the range in which
the standard auto iris can control exposure, the auto
gain control (AGC) or auto exposure (AE) backs up to
ensure proper exposure.
Edit Search Function
Pressing the EDIT SEARCH buttons allows the tape to
play back in search mode. Set either of two playback
speeds.
Recording time (REC TIME) display
Recording time can be displayed in either of the
following modes.
SetupLogTM function
Settings at shooting are recorded onto the tape in real
time. This recorded data can then be used to reproduce
the same shooting conditions in subsequent shots. It
also makes it easier to identify the cause of problems
in previous shots.
• Total recording time for all cuts (TTL1))
• Total recording time for current cut (DUR2))
Viewfinder super detail
Video signals for the viewfinder are mixed with DTL
Video light control
signals to make focusing easier.
A video light connector and control switch are
equipped. You can turn the light on and off
automatically as you start and stop the VCR operation.
Dual zebra pattern display
Two types of zebra patterns, zebra 1 and zebra 2 can
be displayed simultaneously or independently. The
zebra 1 can be set to the levels ranging from 70 to 90
IRE on the DSR-370/570WS (or from 70 to 90% on
the DSR-370/570WSP) and the zebra 2 indicates the
levels of 100 IRE or more for the DSR-370/570WS (or
the levels of 100% or more for the DSR-370/
570WSP).
High-performance viewfinder (DXF-801/
801CE)
• High resolution (600 TV lines of horizontal
resolution)
• DISPLAY switch that can turn the character display
on and off
Color temperature display
• Light that can light the lens control elements
• Large-diameter eye cup for easier viewing and
focusing
When reading the white balance, the color temperature
is displayed on the viewfinder screen.
• PEAKING potentiometer for vertical and horizontal
detail control
Switching the color temperatures for the
preset white balance
You can select the preset white balance at 3200 K or
5600 K by setting the FILTER control. The preset
white balance can be switched to other value when the
menu setting is changed (see page 93).
• Two indicators can be used as TALLY indicators
• Tough die-cast aluminum body
• Automatic aspect ratio switching between 16:9 and
4:3 (DSR-570WS/570WSP only)
Video monitor output with text
The video signal with text superimposed that is shown
in the viewfinder can also be output to an external
video monitor.
..........................................................................................................................................................................................................
1) TTL = Total 2) DUR = Duration
Chapter 1 Overview
11
Features
DVCAM cassettes
Features of the DSR-570WS/
570WSP Camera Section
• This camcorder can use both standard-size and mini-
size DVCAM cassettes. According to cassette size,
the camcorder automatically corrects reel position.
• The maximum recording/playback times are 184
minutes for standard size cassettes and 40 minutes for
mini cassettes.
• DVCAM cassettes include a cassette memory.
Information about the editing points (ClipLink™ log
data) that is specified while shooting is recorded into
this cassette memory.
Following are features of the DSR-570WS/570WSP,
considered only as a 16:9 wide screen type camcorder.
For features which are common with the DSR-370/
370P 4:3 standard screen type camcorder, see
“Features of the DSR-370/370P/570WS/570WSP
Camera Section” on the previous page.
Switchable between aspect ratios 16:9 and 4:3
Menu operations allows instantaneous switching
between 16:9 (wide screen) and 4:3 (standard screen)
aspect ratios. In 4:3 mode, 16:9 video signals produced
by wide aspect CCDs are digitally processed to extract
the section corresponding to a 4:3 screen (see page
105).
Able to record the external video signals
Fitting the optional DSBK-501/501P Analog
Composite Input Board enables the camcorder to
record external analog video signals. (See pages 27, 64
and 93.)
Addition of aspect ID signal
By menu settings, a wide-aspect ID signal1) can be
added to video signals2) in 16:9 mode (see page 105).
ClipLink™ function
Automatic switching of viewfinder aspect ratio
When the supplied DXF-801/801CE viewfinder is
used, the scan size of the viewfinder screen switches
automatically to match the current aspect ratio (16:9 or
4:3) (see page 105).
The ClipLink function links all stages from shooting to
editing. Once editing points have been set with this
function during shooting, they can be used to boost the
efficiency of editing work.
Creation of clips
Features of VCR Section
Using the ClipLink function, the camcorder operator
can create clips to be used during editing.
The images captured at the Mark IN points are
recorded in a compressed format onto the tape as
“Index Pictures”3). In addition, editing point-related
data (scene number, time code for Mark IN/OUT
points, etc.) is recorded in the cassette memory.
Features of the VCR section are common to the DSR-
370/370P and DSR-570WS/570WSP.
The camcorder uses the DVCAM recording format.
The internal signal processing is digitalized to provide
more stable output signals and higher reliability.
ClipLink mode
Compatible with consumer DV
To use the ClipLink function, select the menu setting
to set the camcorder into ClipLink mode. There is also
a ClipLink continue function that enables clips to be
continued even after a break in recording.
A DV cassette recorded on a DV-format VCR can be
played back on the camcorder. (Cassettes recorded in
LP mode cannot be played back.)
..........................................................................................................................................................................................................
• The Y component of Y/C separate signals and the Y
component of component signals output from the VTR/
CCU connector.
1) ID signals complying with EIAJ CPR-1204 (DSR-370/
570WS) or complying with ETS WSS (DSR-370P/
570WSP).
3) It is necessary to fit the optional DSBK-301A Index
Picture Board.
2) Video signals refer to the following:
• Video signals output from the VIDEO OUT connector
and MONITOR OUT connector.
12
Chapter 1 Overview
PCM digital audio
Equipped with DV OUT connector
Recording/playback can be set to audio lock mode.
You are able to select between two-channel recording
(with a sampling frequency of 48 kHz) mode or four-
channel recording (with a sampling frequency of 32
kHz) mode (CH-1 and CH-2 only).
The DV OUT connector is i.LINK1) compatible. You
can connect Sony equipment with DV input
connectors.
You can control cut editing, dubbing, recording, and
recording pause if you connect the DSR-70A/70AP
Digital Videocassette Recorder (with the DSBK-140
i.LINK/DV Input/Output Board fitted) to the DV
OUT connector on the camcorder, using an i.LINK
cable (DV connecting cable). (See pages 29, 51, and
64.)
Equipped with audio output connectors
During recording or playback, audio output can be
monitored via a built-in speaker, a connected earphone
or via (two-channel) audio output connectors.
Other Features
Color playback
Can be combined with portable VCR and
CCU
Connect an external video monitor for color playback
(playback adaptor not required). This camcorder is
equipped with two video monitor connectors: one for
composite video output and the other for S-video
output.
You can connect Betacam VCRs, commercial S-VHS
VCRs, and the CCU-M5A/M5AP to the 26-pin VTR/
CCU connection on the front panel.
VCR data display
This camcorder is able to display the following data on
the viewfinder screen.
• Time values (counter, time code, or user bit values)
• Audio recording levels
• Remaining tape time
• Operation mode of the VCR section
• Remaining battery capacity
• ClipLink information
..........................................................................................................................................................................................................
1) is a trademark of Sony Corporation and indicates that
this product is in agreement with IEEE 1394-1995
specifications and their revisions.
Chapter 1 Overview
13
Location and Function of Parts
Using the CD-ROM Manual
The supplied CD-ROM includes operation manuals for
the DSR-370/570WS series of digital camcorders and
players (English, Japanese, French, German, Italian
and Spanish versions).
To Read the CD-ROM Manual
To read the operation manual contained in the CD-
ROM disc, do the following.
CD-ROM System Requirements
1 Insert the CD-ROM disc in your CD-ROM drive.
The following are required to access the supplied CD-
ROM disc.
A cover page appears automatically in your
browser.
• Computer: PC with MMX Pentium 166 MHz or
faster CPU, or Macintosh computer with PowerPC
CPU.
If it does not appear automatically in the browser,
double click the index.htm file on the CD-ROM
disc.
- Installed memory: 32 MB or more
- CD-ROM drive: × 8 or faster
• Monitor: Monitor supporting resolution of 800 × 600
or higher
2 Select and click the operation manual that you
want to read.
A PDF file of the operation manual opens.
When these requirements are not met, access to the
CD-ROM disc may be slow, or not possible at all.
Note
If you lose the CD-ROM disc or become unable to
read its content, for example because of a hardware
failure, contact a Sony service representative.
Preparations
The following software must be installed on your
computer in order to use the operation manuals
contained in the CD-ROM disc.
• Microsoft Internet Explorer Version 4.0 or higher, or
Netscape Navigator Version 4.0 or higher
• Adobe Acrobat Reader Version 4.0 or higher
Notes
• If Microsoft Internet Explorer is not installed, it may
be downloaded from the following URL:
http://www.microsoft.com/ie
• If Netscape Navigator is not installed, it may be
downloaded from the following URL:
http://home.netscape.com/
• If Adobe Acrobat Reader is not installed, it may be
downloaded from the following URL:
http://www.adobe.com/products/acrobat/
readstep.html
.........................................................................................................................................................................................................
• MMX and Pentium are registered trademarks of Intel
Corporation or its subsidiaries in the United States and
other countries.
• Netscape Navigator is a registered trademark of Netscape
Communications Corporation in the U.S. and other
countries.
• PowerPC is a registered trademark of International
Business Machines Corporation.
• Macintosh is a registered trademark of Apple Computer,
Inc.
• Adobe and Acrobat are registered trademarks of Adobe
Systems Incorporated in the United States and/or other
countries.
• Microsoft is a registered trademark of Microsoft
Corporation in the United States and/or other countries.
14
Chapter 1 Overview
Location and Function of Parts
Front View
0 Switch guard
How to remove the switch guard
1. Detach the two screws (M3).
2. Remove the switch guard, and replace
the screws detached in step 1.
1 MIC IN +48 V connector
2 VF connector
3 FILTER control
4 Lens mount
5 SHUTTER switch
6 TAKE button
7 AUDIO LEVEL knob
8 WHT/BLK switch
9 VTR button
1 MIC (microphone) IN +48 V connector (XLR 3-
pin, female)
Connect the supplied microphone or an optional
microphone (operable with a 48 V supply).
6 TAKE button
Press this button to specify an editing point (Mark IN/
OUT or Cue point) at the current tape position during
shooting. (See page 79.)
2 VF (viewfinder) connector (20-pin)
This is the connector for the DXF-801/801CE
viewfinder.
7 AUDIO LEVEL knob
You can use this knob to manually adjust the channel 1
audio recording level.
3 FILTER control
Select the color temperature conversion filter
appropriate to the lighting conditions. (See page 58.)
8 WHT/BLK (white/black) switch
This switch is used for automatic adjustment of the
white balance and black balance. (See pages 126 to
129.)
4 Lens mount
Attach the zoom lens here.
9 VTR button
Press this button to start and stop recording on the
VCR.
5 SHUTTER switch
Use this switch to set the shutter speed, CLS (clear
scan), or EVS setting (see page 130). Usually, set this
switch to OFF.
0 Switch guard
Prevents mis-operation of the EZ MODE button (4
on page 17), A.IRIS MODE switch (6 on page 17),
and ATW button (qf on page 17). When using these
buttons and switch, open the guard.
Chapter 1 Overview
15
Location and Function of Parts
Right Side View
Front section
1 EZ FOCUS button
2 EDIT SEARCH buttons
3 LIGHT switch
4 EZ MODE button and indicator
5 ZEBRA button and indicator
6 A.IRIS MODE switch and indicator
7 MENU switch
8 W.BAL switch
9 MENU dial
0 POWER switch
qa OUTPUT/DL/DCC+ switch
qs NG button
qd GAIN switch
qf ATW button and indicator
1 EZ FOCUS button
2 EDIT SEARCH buttons
Press this button to turn the “easy focus” function on.
This opens the iris, to make it easier to focus before
shooting. The indication “EZ FOCUS” appears in the
viewfinder while the function is on; to turn it off, press
the EZ FOCUS button again. If left on, the function
automatically turns off after about ten seconds.
You can see the search playback while pressing either
of these buttons at recording pause mode to quickly
find the next recording start point. Two playback
speeds are available. Press either of the buttons to the
inner position to increase the speed.
3 LIGHT (video light) switch
Note
Controls the video light connected as follows.
AUTO: turns on the video light during recording if
the power switch on the light is set to on.
MAN (manual): allows the power switch on the
video light to turn the light on and off.
If the “easy focus” function is still on when you press
the VTR button, it turns off automatically and
recording starts about one second later.
16
Chapter 1 Overview
4 EZ (“easy”) MODE button and indicator
Press this button (EZ mode on) when you want to
shoot immediately, with automatic adjustment of the
camcorder settings to standard values. (See page 104
for EZ mode setting.) When this function is used, the
iris and the white balance are adjusted automatically.
(The total level control system functions.) Press this
button again to return the camcorder to the previous
settings (EZ mode off).
9 MENU dial
Use this dial to change menu pages or settings.
0 POWER switch
Powers the camcorder on or off.
qa OUTPUT/DL/DCC+ (DynaLatitude/dynamic
contrast control plus) switch
Use this switch to select the DCC+ function, the
DynaLatitude function, or color bar output.
Select the CAM/DCC+ position in most cases.
CAM/DCC+: This activates the DCC+ function.
This prevents color faults when shooting high-
intensity subjects.
Note
EZ mode does not function in the following cases.
• When the RM-M7G Remote Control Unit is
connected
• When the CCU-M5A/M5AP Camera Control Unit is
connected
• When external analog signals are being input.
CAM/DL: This setting uses the DynaLatitude
function, which finely adjusts the contrast of each
pixel according to a histogram of luminance signal
levels. Access advanced menu page 2 to set the
DynaLatitude function ON or OFF. The
DynaLatitude effect can be set to any of three
levels, Low, STD (standard), and High with basic
menu page 2.
5 ZEBRA button and indicator
Depress this button to display a zebra pattern (diagonal
stripes) in the viewfinder.
Depending on the zebra setting in advanced menu page
4 (see page 102), the zebra 1 for video levels between
70 to 90 IRE (or 70 to 90%) and the zebra 2 for video
levels 100 IRE or more (or 100% or more) can be
displayed independently or simultaneously.
BARS: This setting displays color bars.
For details of menu operation, see Chapter 4 “Viewfinder
Screen Indications and Menus” (See page 85).
qs NG button
6 A.IRIS (auto iris) MODE switch and indicator
When you use the auto iris function (by setting the iris
selector on the lens to A), set this switch to suit the
shooting conditions. Selecting BACK L gives more
light to back-lit subjects, and selecting SPOT L adjusts
for high contrast in spot-lit subjects. For normal
shooting, set this switch to STD.
When using the ClipLink function during shooting,
you can designate a particular scene as “NG” (No
Good) by pressing this button before shooting the next
scene. Press the button again to cancel the NG setting.
qd GAIN switch
This selects one of the three gain settings, high,
medium or low. You can choose the gain values
assigned to the H, M and L settings from values from
–3 dB to 24 dB + DPR and hyper gain. (See page
100.) The factory default selections are 18 dB (H), 9
dB (M) and 0 dB (L).
7 MENU switch
When you press this switch to the ON position, the
basic menu is displayed. Keep pressing it to the ON
position to cycle through the various menu displays.
When you press the switch to the STATUS position,
the camcorder’s status (of current settings) is
displayed.
Note
When the HYPER GAIN switch (7 on page 25) is in
the ON position, the GAIN switch has no effect.
8 W. BAL (white balance) switch
This selects the white balance setting from the preset
value, the value in memory A or the value in memory
B. (See page 126.) You can select the preset white
balance at 3200 K or 5600 K using the FILTER
control (3 on page 15). You can change the preset
color temperature on basic menu page 2. (See page
93.)
qf ATW (auto tracing white balance) button and
indicator
Press this button, turning the indicator on, when you to
automatically adjust the white balance to follow
changes in the lighting conditions. (See page 128.)
Chapter 1 Overview
17
Location and Function of Parts
Rear section
1 EJECT button
STOP
REW
PLAY
F FWD
EJECT
2 Tape transport buttons and indicators
3 EARPHONE connector
4 WARNING indicator
5 LIGHT switch
6 DISPLAY switch
7 AUDIO LEVEL (CH-1/CH-2) knobs
8 Display window
9 RESET/(MENU SET) button
0 Speaker
qa ALARM knob
qs MONITOR knob
1 EJECT Z button
3 EARPHONE connector (mini-jack)
Press to open the cassette holder (1 on page 27) when
the camcorder is powered.
Connect an earphone or headphones. This outputs the
same sound that would be output to the speaker (0 on
page 21), but mutes the speaker.
2 Tape transport buttons and indicators
These buttons transport the tape as shown below.
4 WARNING indicator
This lights or blinks when an abnormality occurs.
Note
For details, see “Warning System” on page 142.
During recording, none of these buttons operates.
Buttons
Operation
5 LIGHT switch
This switches the display window (8 on page 19)
light on or off.
REW m
Rewinds the tape. The indicator lights while
the tape is being rewound.
Press while the tape is being rewound or
during playback to view reverse search
playback.
6 DISPLAY switch
Switches time value indication shown in the display
window (8 on page 19).
COUNTER: Shows the tape transport time in
HH:MM:SS (hours, minutes and seconds).
TC: Shows the time code value.
F FWD M Fast forwards the tape. The indicator lights
while the tape is being fast forwarded.
Press while the tape is being fast forwarded
or during playback to view forward search
playback.
PLAY N
Plays back the recorded video. The indicator
lights during playback.
U-BIT: Shows the user bit data in the time code.
STOP x
Stops the tape.
18
Chapter 1 Overview
The audio levels are indicated in the display window 8.
For details, see “8 Display window”.
7 AUDIO LEVEL (CH-1/CH-2) (audio recording
level adjustments for channels 1 and 2) knobs
When the AUDIO SELECT (CH-1/CH-2) switches
(4 on page 23) are set to MAN, these knobs adjust
the audio levels being recorded on channels 1 and 2.
8 Display window
Shows the following items. Use the LIGHT switch (5
on page 18) to light up the display window.
A Playback indication
B DATE indication
C Non-drop frame indication (DSR-370/570WS only)
D External synchronization lock indication
E Hold indication
F Audio level indicators
G ClipLink log data indication
dB
0
OVER
OVER
PB DATE NDF EXT-LK
HOLD
H ClipLink continue
S Time value
indication
indication
-12
-20
H
MIN
SEC
CL
FRM
R Clip remaining
indication
IP
CONT
CLIP
TAPE
BATT
DIAG
I IP indication a)
CL
IP
CONT
Q Tape remaining
indication
P Battery capacity
-30
-40
DVCAM
Li
DVCAM
Li
E
F
-∞
J Lithium backup
F
F88 3428kk
1
2
battery warning
RF SERVO HUMID SLACK
indication
O Service indication
M Audio mode indications
N Warning indications
K DVCAM indication
L Cassette memory indication
a) When the optional DSBK-301A is fitted
Indications in the display window
Description
Indication
A Playback indication
Appears during playback, fast forward or rewind with the time data display showing a
time code or user bit value.
B DATE indication
Appears when the date or time is displayed in the time value indication area S.
C Non drop-frame indication (DSR- Appears when non-drop frame mode is selected.
370/570WS only)
D External synchronization
indication
Appears when the internal time code generator is locked to an external signal input to
the TC IN connector (3 on page 28).
E Hold indication
Appears when the internal time code generator is stopped.
These show the audio recording or playback levels of channel 1 and channel 2.
F Audio level indicators
G ClipLink log data indication
H ClipLink continue indication
I IP (Index Picture) indication
Appears when using a cassette with cassette memory containing ClipLink log data.
Appears when back space editing using ClipLink function is possible.
Appears when the ClipLink function is set to on in the VCR menu and Index Picture
recording is allowed. (The optional DSBK-301A is required.)
(Continued)
Chapter 1 Overview
19
Location and Function of Parts
Indications in the display window (continued)
Description
Indication
J Lithium backup Appears when the voltage of the internal lithium backup battery (CR2032) is low. If this
battery warning indication appears, replace the lithium backup battery immediately.
For further information about replacing lithium battery, see “Inserting and Replacing
the Lithium Battery” (page 37).
K DVCAM
Disappears when the cassette being played back is not for DVCAM format.
indication
L Cassette
memory
Appears when using a cassette with cassette memory.
indication
M Audio mode
These show audio recording/playback mode.
indications
Fs32k: 4-channel mode (32kHz sampling frequency)
Fs48k: 2-channel mode (48kHz sampling frequency)
For further information about selecting audio recording mode, see “Selecting Audio
Recording Mode Menu 212” (page 123).
N Warning
Include the following.
indications
RF: Appears when the video heads are clogged, or when there is a fault in the
recording system.
SERVO: Appears when the servo lock is not functioning.
HUMID: Appears when there is condensation on the drum.
SLACK: Appears when there is a tape winding fault.
For measures against warning indications, see “Warning System” (page 142).
O Service
Appears during maintenance or VCR menu operations (page 117). It does not appear
during normal operation.
indication
P Battery
capacity
This indicates the battery capacity and voltage as shown below.
Change menu setting for the battery you are using.
indication
For menu settings, see “Selecting Battery Capacity Indication Menu 206” (page 120).
Battery voltage
Indication
BP-L40/L40A/
L60/L60A/L90/L90A
NP-1B/BP-90A
BP-M50/M100
BATT E[xxxxxx]F
15.0 V or more
14.0 to 15.0 V
13.0 to 14.0 V
12.0 to 13.0 V
11.3 to 12.0 V
11.25 to 11.3 V
11.0 to 11.25 V
11.0 V or less
12.5 V or more
12.0 to 12.5 V
11.75 to 12.0 V
11.5 to 11.75 V
11.3 to 11.5 V
11.25 to 11.3 V
11.0 to 11.25 V
11.0 V or less
14.0 V or more
BATT E[xxxxx ]F
13.65 V to 14.0 V
13.40 V to 13.65 V
12.90 V to 13.40 V
12.40 V to 12.90 V
12.25 V to 12.40 V
11.00 V to 12.25 V
11.0 V or less
BATT E[xxxxp]F
BATT E[xxx p]F
BATT E[xxpp]F
BATT E[xxpp]F (blinking)1)
BATT E[x pp]F (blinking)
BATT E[ppp]F (blinking)
1) Replace the battery pack when this indication appears.
20
Chapter 1 Overview
Indications in the display window (continued)
Indication
Description
Q Tape remaining indication
During recording or pause mode, this indication shows the remaining tape time as
shown below. It is not displayed when no cassette is loaded.
Indication
Tape time remaining
30 minutes or more
25 to 30 minutes
20 to 25 minutes
15 to 20 minutes
10 to 15 minutes
5 to 10 minutes
2 to 5 minutes
TAPExxxxxxx
TAPExxxxxx
TAPExxxxx
TAPExxxx
TAPExxx
TAPExx
TAPEx
TAPEx (blinking)
TAPE (blinking)
0 to 2 minutes
End of tape
R Clip remaining indication
This shows how many clip shots or Cue points can be recorded1).
Indication
Clip shots
51 or more
41 to 50
Cue point
CLIPxxxxxx
CLIPxxxxx
CLIPxxxx
CLIPxxx
101 points or more
81 to 100 points
61 to 80 points
41 to 60 points
21 to 40 points
1 to 20 points
1 to 6 points
31 to 40
21 to 30
CLIPxx
11 to 20
CLIPx
CLIPx (blinking) 2)
1 to 10
1 to 3
CLIP
CLIP (blinking) 2)
Cannot record
Cannot record
1) The optional DSBK-301A is required for Index Picture recording.
2) When back space editing using ClipLink function is possible (when CONT is displayed)
S Time value indication
Depending on the DISPLAY switch (6 on page 18) setting, this shows a counter
value, time code value or user bit value. Press the MENU button (1 on page 22) to
display the VCR menu.
9 RESET/(MENU SET) (counter reset/VCR
menu) button
Also, this button is used to change menu settings.
Resets the time value shown in the display window.
This button operates differently depending on settings
of the DISPLAY switch (6 on page 18) and the TC
mode switch 1 (9 on page 23) and 2 (8 on page 23).
For details on the VCR menu, see “Setting on the VCR
Section VCR Menu” (page 117).
0 Speaker
Outputs the recorded or playback audio. When a
warning indicator appears in the viewfinder or display
window, the speaker sounds a warning tone.
The speaker is muted (does not output a warning tone)
when an earphone is connected to the EARPHONE
connector (3 on page 18).
Switch setting
RESET button operation
DISPLAY: COUNTER
Resets counter value to
0:00:00.
DISPLAY: TC
TC mode switch 1: PRESET
TC mode switch 2: SET
Resets time code to
00:00:00:00.
For details on the warning tone, see “Warning System”
(page 142).
DISPLAY: U-BIT
TC mode switch 1: PRESET
TC mode switch 2: SET
Resets user bit a) to
00 00 00 00.
a)Bits of time code recorded on tape, in which users can
record necessary information.
Chapter 1 Overview
21
Location and Function of Parts
qa ALARM (alarm tone volume adjustment) knob
Controls the volume of the warning tone that is output
via the speaker (0 on page 21) or EARPHONE
connector (3 on page 18). Turning this knob to the
minimum setting mutes the alarm tone.
qs MONITOR (monitor volume adjustment) knob
Controls the volume of the sound other than the
warning tone that is output via the speaker (0 on page
21) or EARPHONE connector (3 on page 18).
Turning this knob to the minimum setting mutes the
audio output.
Operation panel under the cover
Right side
1 MENU button
2 ADVANCE button
3 SHIFT button
MENU
ADVANCE
SHIFT
REC TIME SKIN DTL
EXT VTR
OUTPUT
TTL
DUR
OFF
ON
OFF
COMPONENT.
VBS
Y/C
AUDIO LEVEL
TTL RESET
SET
PRESET
F-RUN
MONITOR SELECT
VTR
TRIGGER
AUTO
CH-1
MIX
CH-2
EXT
4 AUDIO SELECT
MAN
REGEN
DATE/TIME
SET
PARALLEL
INT ONLY
EXT ONLY
(CH-1/CH-2)
AUDIO SELECT
LITHIUM BATT
R-RUN
switches
CH-1
CH-2
ClipLink
CONTINUE
HYPER
GAIN
SETUP
FRONT MIC
LOW CUT
MONITOR OUT
CHARACTER
AUDIO IN
FRONT
REAR
ON
OFF
FILE
STD
ON
OFF
VJ MIC
WIRELESS
ON
OFF
5 AUDIO IN (CH-1/
CH-2) switches
6 Lithium battery compartment
7 MONITOR OUT CHARACTER switch
8 TC mode switch 2
9 TC mode switch 1
0 ClipLink CONTINUE button
qa MONITOR SELECT switch
setting, press this button to increment the digit that has
been selected with the SHIFT button (3 on page 23).
In other case, keep pressing this button to show the
clip remaining indication instead of time value.
(Example: CLIP 045)
1 MENU button
Press this button to display the VCR menu in the
display window.
For details about the VCR menu, see “Setting on the VCR
Section —VCR Menu” (page 117).
For time code and user bit settings, see page 71.
2 ADVANCE button
When setting time code and user bit values, or at menu
On how to use the ADVANCE button for menu settings, see
“Setting on the VCR Section —VCR Menu” (page 117).
22
Chapter 1 Overview
3 SHIFT button
8 TC (time code) mode switch 2
When setting time code and user bit values, or at menu
setting, keep pressing this button to select a digit. The
selected digit will start blinking.
In other case, keep pressing this button to show the
date (when the DISPLAY switch (6 on page 17) is
set to U-BIT) and time (when the DISPLAY switch is
set to TC) instead of time value.
Sets the mode for advancing time code values when
the TC mode switch 1 9 has been set to PRESET.
F-RUN: The time code advances continuously
whether or not the camcorder is recording. Use
this setting to align the time code value with real
time.
SET: Use this setting to set the time code or user bit
value.
R-RUN: The time code value advances only during
recording. Use this setting to have consecutive
recordings on the tape.
For time code and user bit settings, see page 71.
On how to use the SHIFT button for menu settings, see
“Setting on the VCR Section —VCR Menu” (page 117).
Note for the DSR-370/570WS
4 AUDIO SELECT (CH-1/CH-2) (audio recording
level adjustments manual/auto selection for
channels 1 and 2) switches
There are two time code frame modes: drop-frame
(DF) mode and non drop-frame (NDF) mode. This
product is shipped with drop-frame mode selected.
These select the audio recording level adjustment
method.
For details on switching between drop-frame mode and non
drop-frame mode, see “Selecting Frame Mode (DF/NDF)
for Time Code (for DSR-370/570WS only) —Menu 204”
(page 119).
AUTO: Use the AGC (automatic gain control) circuit
to automatically adjust the audio level.
MAN: Enables users to manually adjust the AUDIO
LEVEL (CH-1/CH-2) knobs (7 on page 19) for
each channel. Select AUTO if excess input levels
are likely to occur.
For details on drop-frame mode and non drop-frame mode,
see “Drop-frame mode (for DSR-370/570WS only)” on page
74.
5 AUDIO IN (CH-1/CH-2) (audio input selection
for channels 1 and 2) switches
9 TC (time code) mode switch 1
These select the input signals to channels 1 and 2.
FRONT: Signals from the microphone connected to
the MIC IN +48 V connector.
Selects between resetting the time code value or
continuing from the time code value at the end of the
previous recording.
VJ MIC: Signals from the remote control unit with
microphone connected to the REMOTE connector
2
WIRELESS: Signals from the WRR-855A
synthesized tuner connected to the WRR
connector via the CA-WR855 Camera Adaptor.
REAR: Signals from a microphone or external
equipment connected to the AUDIO IN (CH-1/
CH-2) connectors.
PRESET: This starts recording time code values on
the tape from the currently set value.
REGEN: During back space editing, this reads the
tape’s current time code value and sets the time
code to record starting from that value. The time
code value is advanced in R-RUN mode
regardless of the setting on TC mode switch 2 8.
DATE/TIME: This synchronizes the time code to
the real time clock set in the VCR menu (see page
119). In this case the time code of the DSR-370/
570WS is recorded in DF (drop-frame mode).
6 Lithium battery compartment
Insert the supplied CR2032 Lithium Battery.
Note
On how to fit the lithium battery, see page 37.
If the ClipLink function is set to on (meaning ClipLink
shooting is allowed) in menu 211 and CONT is
displayed in the display window, regardless of the
setting of this switch, the time code generator
automatically enters the REGEN mode at recording.
(When not performing ClipLink shooting, set the
ClipLink function to oFF (see page 123)).
7 MONITOR OUT (monitor output)
CHARACTER switch
Set ON to superimpose text information on the
monitor output.
Note
Set this switch ON when using the freeze mix
function.
Chapter 1 Overview
23
Location and Function of Parts
0 ClipLink CONTINUE button
When restarting ClipLink shooting, press this button to
add the new clip at the end of the recorded clips.
qa MONITOR SELECT (audio monitor selection)
switch
Selects audio output via the speaker (0 on page 21) or
earphone.
CH-1: Channel 1 audio
Note
When restart recording without pressing this button,
the pre-recorded ClipLink log data and Index Pictures
are deleted.
MIX: Mixed audio (channels 1 and 2)
CH-2: Channel 2 audio
EXT: The sound selected by an external VCR
connected to the VTR/CCU connector (0 on
page 29)
For details , see “ClipLink Shooting” (page 77).
Left side
1 REC TIME switch
2 SKIN DTL switch
3 EXT VTR OUTPUT switch
MENU
ADVANCE
SHIFT
REC TIME SKIN DTL
EXT VTR
OUTPUT
TTL
DUR
OFF
ON
OFF
COMPONENT.
VBS
Y/C
AUDIO LEVEL
TTL RESET
SET
PRESET
F-RUN
MONITOR SELECT
VTR
TRIGGER
AUTO
MAN
CH-1
MIX
CH-2
EXT
REGEN
DATE/TIME
SET
PARALLEL
INT ONLY
EXT ONLY
AUDIO SELECT
LITHIUM BATT
R-RUN
CH-1
CH-2
ClipLink
CONTINUE
HYPER
GAIN
SETUP
FRONT MIC
LOW CUT
MONITOR OUT
CHARACTER
AUDIO IN
FRONT
REAR
ON
OFF
FILE
STD
ON
OFF
VJ MIC
WIRELESS
ON
OFF
4 VTR TRIGGER switch
5 FRONT MIC LOW CUT switch
6 SETUP switch
7 HYPER GAIN switch
8 SKIN DTL SET button
9 TTL RESET button
OFF: Switches off the recording time display.
If, however, in advanced menu 6 you set the time
code display item (TC IND) to ON (see page
103), then the VCR time data (time code, counter,
or user bit value) is displayed.
1 REC (recording) TIME switch
Selects the recording time indication in the viewfinder.
TTL (TOTAL): Displays the total recording time.
The total recording time is not reset even when
you stop the VCR and power off the camcorder,
for example, to replace the battery pack.
DUR (DURATION): Displays the recording time of
the current cut.
24
Chapter 1 Overview
Note
7 HYPER GAIN switch
Setting this switch to ON increases the gain by a factor
of about 60 with respect to 0 dB (a 30 dB increase by
electronic amplification and a 6 dB increase for DPR,
bringing about a total gain increase of 36 dB, or an
increase 42 dB for the DSR-570WS/570WSP only).
When this switch is in the ON position, the indication
“HYPER” appears in the viewfinder, and the GAIN
UP indicator in the viewfinder also lights.
The recording time displayed when this switch is set to
TTL or DUR is obtained by counting the duration of
the internal reference signal input to the camcorder.
The value may not agree exactly with the value
derived from the time code values. Furthermore, the
value displayed may not be correct when another
manufacture’s VCR is connected to the camcorder.
When finished shooting, return this switch to OFF
position. The “HYPER” indication disappears and the
GAIN UP indicator goes out.
2 SKIN DTL (skin detail) switch
Set this switch to ON to use the skin detail correction
function.
Note
For details, see “Skin Detail Correction” (page 138).
Increasing the gain with this switch reduces the
horizontal resolution by approx. 50%.
3 EXT VTR OUTPUT switch
Depending on the external VCR connected to the
VTR/CCU connector (0 on page 29), this switches
the video signal output to the VCR.
COMPONENT, VBS: Component/composite video
signal
8 SKIN DTL (skin detail ) SET button
Press this button with the SKIN DTL switch 2 to
display the area detect cursor on viewfinder screen.
Place the cursor on the target and press this button to
perform skin detail correction.
Y/C: S-video signal
Note
For details, see “Skin Detail Correction” (page 138).
When a CCU (camera control unit) is connected,
component video signals/composite video signals are
output, regardless of the setting of this switch.
9 TTL (total) RESET button
Pressing this button resets the total recording time
(TTL selection) to 0.
4 VTR TRIGGER switch
Sets the function of the VTR button on the camcorder
or lens when a VCR is connected to the VTR/CCU
connector (0 on page 29) or DV OUT connector (8
on page 29).
PARALLEL: Operates both internal and external
VCRs.
INT ONLY: Operates the internal VCR only.
External VCR operation is performed locally.
EXT ONLY: Operates the external VCR only.
Set this switch to INT ONLY when you need to do
cut editing or dubbing using the DV OUT connector.
5 FRONT MIC LOW CUT switch
Set this switch to ON to insert a high-pass filter in the
microphone circuit, reducing wind noise.
Normally leave the switch in the OFF position.
6 SETUP switch
This selects the setup method for this camcorder.
FILE: Set up using both a setup file and the setup
menu.
STD: Set up using the setup menu. The setup file is
no longer displayed.
Chapter 1 Overview
25
Location and Function of Parts
Left and Upper View
Front section
1 Shoulder strap fitting
2 Attachment shoe for large viewfinder
3 Accessory fitting shoe and screw hole
4 Viewfinder left-to-right positioning ring
5 Viewfinder fitting shoe
6 REMOTE connector 1
7 Viewfinder front-to-back position locking knob
8 Fitting for optional microphone holder
9 Video light connector
0 LENS connector
qa VIDEO OUT connector
qs REMOTE connector 2
6 REMOTE connector 1 (mini-jack)
1 Shoulder strap fitting
Connect the RM-LG1 Remote Control Unit to enable
remote operation of the ClipLink function.
To use the supplied shoulder strap, fix one end here
and the other end to the right side. (See page 45.)
Note
2 Attachment shoe for large viewfinder
This allows you to attach the optional electronic
viewfinder. (See page 42.)
The RM-81 cannot be connected.
If you connect the optional cable (Sony part number:
1-790-779-11) to this connector, you can control the
zoom using the optional RM-VJ1 Remote Control Unit
(equipped with microphone and monitor), even when
using the conventional lens.
3 Accessory fitting shoe and screw hole
Attach optional video lights or other accessories. (See
page 44.)
4 Viewfinder left-to-right positioning ring
Loosen this ring to adjust the left-to-right position of
the viewfinder. (See page 41.)
For details, consult your Sony dealer.
7 Viewfinder front-to-back position locking knob
Loosen this knob to adjust the front-to-back position of
the viewfinder. (See page 41.)
5 Viewfinder fitting shoe
Fix the DXF-801/801CE Viewfinder.
26
Chapter 1 Overview
8 Fitting for optional microphone holder
You can fit an optional CAC-12 Microphone Holder
here. (See page 43.)
qs REMOTE connector 2 (10-pin)
Connect the optional RM-M7G Remote Control Unit
to this connector. Set the CAMERA SELECT switch
on the bottom of RM-M7G to 1.
9 Video light connector
Notes
A video light with a maximum power consumption of
30 W such as the Anton Bauer Ultralight 2 or
equivalent can be connected.
• EZ mode cannot be used if the RM-M7G is
connected to the camcorder.
• Be sure to turn off the power of the camcorder before
connecting the RM-M7G.
0 LENS connector (12-pin)
• Be sure to turn off the power of the camcorder before
disconnecting the equipment connected to this
connector. Otherwise, the camcorder will not work
properly.
• To control this unit from a CCU (camera control
unit), connect the RM-M7G to the CCU.
If you use a lens with cable, connect the lens cable.
qa VIDEO OUT connector (BNC)
This outputs the video signal captured by the
camcorder.
Rear section
1 Cassette holder
2 GEN LOCK IN/VIDEO IN connector a)
3 TC IN connector
4 TC OUT connector
5 S VIDEO OUT connector
6 MONITOR OUT connector
7 AUDIO OUT CH-1/CH-2 connectors
a) When the optional DSBK-501/501P is fitted
1 Cassette holder
GEN LOCK IN: When synchronizing the camcorder
to an external signal, input a reference video
signal (VBS or BS). (See page 93.)
VIDEO IN: When the optional DSBK-501/501P
Analog Composite Input Board is fitted to the
camcorder, you can input the analog video signals
(VBS) to this connector.
Power the camcorder and press the EJECT button to
open the lid. Insert the cassette and close the lid by
pressing the indication “PUSH” .
2 GEN LOCK IN (gen lock video input)/VIDEO
IN (video input) connector (BNC)
Chapter 1 Overview
27
Location and Function of Parts
3 TC IN (time code input) connector (BNC)
Input an external signal for synchronizing the built-in
time code generator. Use an SMPTE (DSR-370/
570WS) or EBU (DSR-370P/570WSP) time code
signal.
5 S VIDEO OUT (S-video output) connector (DIN
4-pin)
This outputs the image being shot or played back as S-
video signals. Connect to the S-video input connector
on an external VCR or video monitor.
Note
6 MONITOR OUT (output) connector
Use a jitterless LTC signal. Using an LTC signal
reproduced by other equipment may cause the
camcorder to malfunction.
Outputs the image being shot or played back as
composite video signals. Connect to the video input
connector on an external VCR or video monitor.
Note
4 TC OUT (time code output) connector (BNC)
This outputs time code signals from the built-in time
code generator. When a time code signal is input to
the TC IN connector, this output signal is synchronized
to it.
The output signal from this connector may discontinue
when switching the operation between recording and
playback. Do not use as a reference signal for external
equipment.
For details about time code, see “Setting the Time code
Value” on page 73.
7 AUDIO OUT CH-1/CH-2 (audio output channel
1 and 2) connectors (phono jacks)
These output the sound being recorded or played back.
Connect to a stereo amplifier or video monitor’s audio
input connectors.
Rear and Bottom
1 TALLY indicator
2 TALLY switch
3 Battery attachment
interface
6 WRR connector
7 Cable clamp
4 DC IN connector
8 DV OUT connector
5 AUDIO IN CH-1/CH-2
connectors and input
selection switches
9 DC OUT connector
0 VTR/CCU connector
qa BREAKER button
28
Chapter 1 Overview
See “Connecting to Audio System” (page 46) for more
information about how to connect a UHF synthesizer tuner.
See “Connecting a CA-370 Intercom Adaptor” (page 48)
for more information about how to connect an intercom
adaptor.
1 TALLY (back tally) indicator (red)
This indicator lights during recording. It will not light
if the TALLY switch 2 is set to OFF. This indicator
also blinks to indicate warnings in the same manner as
the REC/TALLY indicator in the viewfinder.
7 Cable clamp
2 TALLY switch
Set this switch to ON to activate the TALLY indicator
1 function.
Fasten an i.LINK cable (DV connecting cable) to the
clamp using the supplied binding tie so that the plug is
not pulled out from the DV OUT connector 8.
For details, see “Warning System” on page 142.
i.LINK cable (DV
connecting cable)
3 Battery attachment interface
Attach a battery pack or an AC-DN1/DN2A AC
Adaptor. When using the WRR-855A synthesized
tuner (for wireless microphones), attach the CA-
WR855 Camera Adaptor here.
For information about fitting a battery pack or an AC
adaptor, see “Power Supply” (page 53). For information
about attaching a synthesized tuner, see “Connecting to
Audio System” (page 46).
Binding tie
8 DV OUT connector (6-pin)
Connect to the DV input connector of an external VCR
via an i.LINK cable.
4 DC IN (DC power input) connector (XLR 4-pin,
male)
To use the camcorder with an AC power supply
connect an optional AC-550/550CE or CMA-8A/
8ACE AC Adaptor.
Notes
• This connector will not work as an input connector.
• When external equipment, such as a VCR, is
connected to this connector, the ClipLink function
and the function for audio fade-in/fade-out during
recording do not work.
5 AUDIO IN CH-1/CH-2 (audio input channel 1
and 2) connectors (XLR 3-pin, female) and input
selection switches
Connect a microphone or other external audio
equipment. Set the input selection switches as
shown below according to the microphone or
equipment.
9 DC OUT (DC power output) connector (4-pin,
female)
This connector supplies power for a WRR-810A/860A
UHF Portable Tuner.
MIC+48V ON (right position): For connecting to a
48-V microphone
Note
0 VTR/CCU connector (26-pin, male)
Connect an external VCR or CCU-M5A/M5AP or
other camera control unit.
If this position is selected for a microphone other than
48-V microphone, the microphone may be damaged.
Notes
MIC (center position): For connecting any
microphone other than 48-V microphone
LINE (left position): For connecting an external
audio signal source such as a stereo amplifier.
• This connector always outputs the signals from the
camera. It is impossible to output the playback
video of the internal VCR.
• The image size on the viewfinder or on the screen of
the RM-VJ1 does not switch automatically, even if
the aspect ratio (16:9/4:3) of the return signal, input
from an external VCR, is switched.
6 WRR (synthesizer tuner/intercom adaptor)
connector (7-pin)
Connect a CS-WR855 Camera Adaptor with attached
WRR-855 UHF Synthesizer Tuner, or a CA-370
Intercom Adaptor for the CCU-M5A/M5AP.
Chapter 1 Overview
29
Location and Function of Parts
• When this connector is used with a battery pack
attached, operation may be interrupted due to
exhaustion of the batteries. To prevent this, see
“Avoiding breaks in operation due to dead
batteries” (page 54).
qa BREAKER (breaker reset) button
If an excessive current flows in the internal circuits,
the internal circuit breaker shuts off the power supply.
Push this button after eliminating the cause of the
excessive current.
• When a CCU is connected to this connector and a
battery pack is attached, power is supplied
automatically from the battery pack. Always power
off the camcorder before attaching or detaching a
battery pack or switching the power.
VCL-716BX Zoom Lens (for DSR-370K2/370PK2)
When using a lens other than VCL-716BX or VCL-719BX,
see page 40 and page 134 (“Designating the lens”).
1 Iris ring
4 MACRO selector
2 Zoom ring
3 Focus ring
5 F.f adjustment ring
and F.f fixing knob
6 MACRO ring
Lens hood
7 ZOOM selector
8 Zoom remote control
connector
qa Instant automatic iris
adjustment button
9 RET button
qs Iris selector
qd Motorized zoom lever
0 VTR button
30
Chapter 1 Overview
1 Iris ring
9 RET (return) button
For manual iris control, set the Iris selector qs to the
“M” position, and turn this ring.
This allows you to check the video signal.
When the internal VCR is in recording pause mode,
press this button to review the last few seconds of the
recording in the viewfinder (recording review). When
an external VCR is connected, pressing this button
connects the E-E video signal1) from the external VCR
to the viewfinder while the internal VCR is recording
or no tape is inserted in the internal VCR.
When a CCU (camera control unit) is connected, you
can view the return video from the CCU in the
viewfinder.
2 Zoom ring
For direct manual zoom control, set the ZOOM
selector 7 to the “MANU.” position, and turn this
ring.
3 Focus ring
Turn this ring to focus the lens on the subject.
4 MACRO (close-up) selector
For close-up work, turn the MACRO ring 6 while
holding this button down. (See page 135.)
For details, see “Playback — Checking Recorded Contents”
(page 70).
0 VTR button
This button starts and stops recording on the VCR.
Press it once to start recording, and once more to stop.
5 F.f (flange focal length) adjustment ring and F.f
(flange focal length) fixing knob
F.f adjustment ring : To adjust the flange focal
length, loosen the F.f fixing knob, then turn the
ring. (See page 133.)
qa Instant automatic iris adjustment button
While using manual iris control, press this button to
switch temporarily to automatic iris control setting.
Automatic control is maintained as long as you hold
the button down.
F.f fixing knob: Fixes the F.f adjustment ring.
6 MACRO (close-up) ring
For close-up, turn this ring while holding the MACRO
selector down. (See page 135.)
qs Iris selector
This selects the mode of iris operation. (See page
134.)
A (automatic): automatic iris
M (manual): manual iris
7 ZOOM selector
This selects the mode of zoom operation.
SERVO: power zoom
MANU. (manual): manual zoom
qd Motorized zoom lever
8 Zoom remote control connector (8-pin)
Connect the optional Lens Remote Control Unit for
remote control of zooming.
Use this to carry out a power zoom. Pressing the lever
harder increases the zoom speed.
W end: zoom toward wide angle
T end: zoom toward telephoto
For details of the lens remote control unit, please contact
Fuji Photo Optical Co., Ltd.
..........................................................................................................................................................................................................
1) E-E video signal: “electric-to-electric” video signal.
This is an input video signal which has passed through
internal electrical circuits, but which has not been
converted to a magnetic signal.
Chapter 1 Overview
31
Location and Function of Parts
VCL-719BX Zoom Lens (for DSR-370K1/370PK1)
When using a lens other than VCL-716BX or VCL-719BX,
see page 40 and page 134 (“Designating the lens”).
1 Iris ring
2 Zoom ring
4 M (close-up) button
5 F.B adjustment ring
and F.B fixing knob
3 Focus ring
6 MACRO ring
7 ZOOM selector
8 Zoom remote control
connector
9 VTR button
0 Shtl button
qa RET button
qs Motorized zoom lever
qd Iris selector
qf Instant automatic iris adjustment button
qg Dip switchs
qh Iris gain adjustment trimmer
qj Shuttle memory position knob
3 Focus ring
1 Iris ring
Turn this ring to focus the lens on the subject.
For manual iris control, set the Iris selector qd to the
“M” position, and turn this ring.
4 M (close-up) button
For close-up work, turn the MACRO ring 6 while
2 Zoom ring
holding this button down. (See page 135.)
For direct manual zoom control, set the ZOOM
selector 7 to the “MANU.” position, and turn this
ring.
32
Chapter 1 Overview
5 F.B (flange focal length) adjustment ring and
F.B (flange focal length) fixing knob
F.B adjustment ring : To adjust the flange focal
length, loosen the F.B fixing knob, then turn the
ring. (See page 133.)
qs Motorized zoom lever
Use this to carry out a power zoom. Pressing the lever
harder increases the zoom speed.
W end: zoom toward wide angle
T end: zoom toward telephoto
F.B fixing knob: Fixes the F.B adjustment ring.
qd Iris selector
This selects the mode of iris operation. (See page
6 MACRO (close-up) ring
For close-up, turn this ring while holding the M button
134.)
down. (See page 135.)
A (automatic): automatic iris
M (manual): manual iris
7 ZOOM selector
This selects the mode of zoom operation.
SERVO: power zoom
MANU. (manual): manual zoom
qf Instant automatic iris adjustment button
While using manual iris control, press this button to
switch temporarily to automatic iris control setting.
Automatic control is maintained as long as you hold
the button down.
8 Zoom remote control connector (8-pin)
Connect the optional Lens Remote Control Unit for
remote control of zooming.
qg Dip switchs
These are used to make settings for shuttle shot
function.
This section is normally covered by a rubber cap.
9 VTR button
This button starts and stops recording on the VCR.
Press it once to start recording, and once more to stop.
qh Iris gain adjustment trimmer
Use this to adjust the iris gain.
0 Shtl button
Use this for shuttle shot function (see next page).
This section is normally covered by a rubber cap.
qa RET (return) button
qj Shuttle memory position knob
This allows you to check the video signal.
Use this for the shuttle shot function (see next page).
When the internal VCR is in recording pause mode,
press this button to review the last few seconds of the
recording in the viewfinder (recording review). When
an external VCR is connected, pressing this button
connects the E-E video signal from the external VCR
to the viewfinder while the internal VCR is recording
or no tape is inserted in the internal VCR.
Note
The E-E video from an external VCR connected to the
DV OUT connector cannot be displayed in the
viewfinder.
When a CCU (camera control unit) is connected, you
can view the return video from the CCU in the
viewfinder.
For details, see “Playback — Checking Recorded Contents”
(page 70).
Chapter 1 Overview
33
Location and Function of Parts
Shuttle shot function
What is the shuttle shot function?
The shuttle shot function allows you to zoom at
maximum speed to a preset position (shuttle memory
position) simply by pressing the lens Shtl button.
When you release the Shtl button, the lens returns to
the original position.
Shtl button
Position before
operation
Shuttle memory
position
Hold Shtl button down.
Dip switch settings
The dip switches on the VCL-719BX zoom lens (see
Release Shtl button.
page 32) are used to make shuttle shot settings.
To set the shuttle memory position
While pressing the Shtl button, rotate the shuttle
memory position knob to set the zoom position.
Rotate the knob to the T side to move in the telephoto
direction, and rotate to the W side to move in the wide-
angle direction.
Dip switches
Shuttle memory position knob
By dip switch settings, the shuttle shot function can be
assigned to the VTR button and the RET button.
Purpose
Dip switch setting
(number: position)
Turn shuttle shot Turn on
1: ON
function on or off
1: OFF
2: OFF
Turn off
Assign shuttle
Turn VTR
shot function to
VTR button
To zoom to the preset shuttle memory
position
control function
off
Press the Shtl button and keep it held down. The lens
zooms to the preset position and stops.
When you release the Shtl button, the lens returns to
the position it was in before the operation.
Turn shuttle shot 2: ON
function on
Assign shuttle
shot function to
RET button
Turn return
video display
function off
3: OFF
Note
Turn shuttle shot 3: ON
function on
The motorized zoom lever does not function while the
Shtl button is held down.
Dip switch 4 is reserved. It is not used currently.
34
Chapter 1 Overview
DXF-801/801CE Viewfinder
Note
camera or camcorder. It operates in 4:3 mode when
connected to the DSR-370/370P. It operates in either
4:3 or 16:9 mode when connected to the DSR-570WS/
570WSP.
You can switch the scan size of the DXF-801/801CE
in accordance with the aspect ratio selected on the
4 TAKE/TALLY indicator
TALLY
TAKE REC BATT
5 BATT indicator
6 REC/TALLY indicators
7 GAIN UP indicator
1 Eyepiece focusing knob
SHUTTER
GAIN UP
2 Stopper
8 SHUTTER indicator
Microphone holding screw
Microphone holder
Microphone
Eye cup
9 PEAKING control
0 CONTRAST control
qa Tally lamp
qs BRIGHT control
qd Eyepiece release catch
qf TALLY switch
qg DISPLAY switch
3 LIGHT switch and light
HIGH LOW OFF
qh Viewfinder connector
LIGHT
1 Eyepiece focusing knob
4 TAKE/TALLY indicator (orange)
Turn this to adjust the viewfinder focus to match your
eyesight. (See page 132.)
When using the ClipLink function while shooting, this
indicator lights when the TAKE button (6 on page
15) has been pressed to set a Mark IN point and goes
out when a Mark OUT point is set.
2 Stopper
Lift up when detaching the viewfinder (See page 41).
5 BATT (battery) indicator (red)
This lights when the battery capacity is low.
3 LIGHT switch and light
The light lights the lens and the switch controls the
light as follows.
Note
This indicator flashes when switches and knobs on the
camera control unit are operated. This is normal and
not a malfunction.
HIGH/LOW: Turn the light on and control the
brightness.
OFF: Turns the light off.
Chapter 1 Overview
35
Location and Function of Parts
6 REC/TALLY (recording/tally) indicators (red)
• These flashe from the time when you press the VTR
button on the lens or camcorder until recording starts,
then stay on continuously during recording.
• These are also used to indicate a fault. (See page
142.)
• When a CCU (camera control unit) is connected,
these indicators light only when a CALL signal is
received from the CCU. They do not light or flash
during VCR recording or in the case of a VCR fault.
• The lower indicator can be disabled by menu setting.
(See page 102.)
qg DISPLAY switch
Set this switch to OFF when you want to remove the
character data from the viewfinder and the monitor
connected to the MONITOR OUT connector.
However, items which are set to OFF in advanced
menu page 5 and page 6 are not displayed even when
this switch is set to ON.
qh Viewfinder connector (20-pin)
Connect this to the VF connector (2 on page 15).
7 GAIN UP indicator (orange)
This lights when the gain is 3 dB or more.
8 SHUTTER indicator (red)
This lights when the SHUTTER switch (5 on page
15) is in the ON position. (If the EVS is selected, the
indicator will not light.)
9 PEAKING control
This adjusts the outline intensity of the viewfinder
image. (See page 132.)
0 CONTRAST control
This adjusts the contrast of the viewfinder image. (See
page 132.)
qa Tally lamp
When the TALLY switch qf is in the ON position, this
operates in the same way as the REC/TALLY
indicators 6.
qs BRIGHT (brightness) control
This adjusts the brightness of the viewfinder image.
(See page 132.)
qd Eyepiece release catch
To view the viewfinder screen directly, press this
catch, and hinge up the eyepiece.
qf TALLY switch
Set this switch to the ON position to use the tally lamp
qa.
36
Chapter 1 Overview
Chapter
2
Fitting and
Connections
Inserting and Replacing the Lithium Battery
This camcorder uses a lithium battery to retain stored
Inserting or replacing the lithium battery
data. When using the camcorder for the first time, be
sure to insert the supplied lithium battery
(CR2032). The camcorder will not operate correctly
without this lithium battery.
Notes
• Carefully read the instructions for inserting and
replacing the lithium battery. Lithium batteries can
explode if misused.
• Use only CR2032 Lithium Batteries. Other types of
lithium batteries may come loose when this
camcorder is moved. If you have difficulty finding
CR2032 Lithium Batteries, contact your Sony dealer.
Lifetime of the lithium battery
When the lithium battery’s voltage falls, the lithium
backup battery warning
appears in the display
Li
window. If this warning appears, replace the lithium
battery (CR2032) within three or four days.
The lithium battery has an average service life of about
two years, however operation in ClipLink mode will
shorten the lifetime until about one year (when the
DSBK-301A is fitted).
Chapter 2 Fitting and Connections
37
Inserting and Replacing the Lithium Battery
1 Turn the POWER switch on.
2 Press down the catch at the top
of the battery cover and open
the cover.
2
Catch
Press and pull forward.
LI
LITHIUM BATT
Battery cover
1
POWER switch
3Take out the lithium battery.
Press down and pull out toward you.
4 Reverse step 3 to insert a
replacement lithium battery.
Make sure that the + symbol
on the battery is facing you.
5 Close the battery cover.
38
Chapter 2 Fitting and Connections
Fitting the Lens
Use the following procedure to fit the lens.
Note
Be sure to turn off the power before fitting the lens.
1 Remove the retaining rubber
which prevents the lens mount
from coming loose, then raise
the lens fixing lever, and
Retaining rubber
remove the lens mount cap.
Lens fixing lever
Lens mount cap
2 With the lens fixing lever
turned fully counterclockwise,
push in the lens, aligning the
projection on the lens with the
cutout on the camcorder.
Align and push in.
3 Supporting the lens, turn the
lens fixing lever fully
clockwise. Replace the
retaining rubber on the lens
mount.
Note
When removing the lens, rotate the lens fixing lever
with your finger on the curved part of the lever.
You could injure your finger if you rotate the fixing
lever with your finger on the tip of the lever.
Chapter 2 Fitting and Connections
39
Fitting the Lens
If using a 1/2” lens other than the VCL-716BX/
719BX on DSR-370/370P
Fitting optional filters
If the connector on the lens attachment section is a 14-
pin connector (VCL-714BXA and other lenses), then
the lens may be operated in the same way as the VCL-
716BX/719BX.
If the lens has a 7-pin connector, then the following
limitations apply.
Loosen the lens hood fixing screw to remove the lens
hood, then attach the filter.
Use a commercially available M82 × 0.75 size screw
to attach the filter.
• The lens iris f. value is not displayed in the
viewfinder.
• Iris operation may be slow in auto iris mode, and
hunting may occur. If this happens, you should adjust
the iris sensitivity (see page 135).
Remove lens hood
If using a lens with a 6-pin connector
This camcorder head has a 12-pin LENS connector. If
the lens cable has a 6-pin connector, fit an adaptor
cable: LO-612 (manufactured by Canon) or ECF-124
(manufactured by Fujinon) or equivalent.
When using a lens with a 6-pin connector, the
following limitations apply.
Lens hood fixing
screw
Filter (optional)
• The lens iris f. value is not displayed in the
viewfinder.
• Iris operation may be slow in auto iris mode, and
hunting may occur. If this happens, you should adjust
the iris sensitivity (see page 135).
If using a 2/3” lens (for only DSR-370/370P)
Fit the lens using the optional LO-32BMT 2/3” lens
adaptor.
40
Chapter 2 Fitting and Connections
Using Accessories
Using the Viewfinder
Removing the Viewfinder
Remove any microphone from the viewfinder before
beginning.
VF connector
1 Pull the viewfinder connector
out of the VF connector on the
front.
2 Loosen the viewfinder left-to-
right position fixing ring, then
pulling up the retaining catch,
slide the viewfinder out.
Retaining catch
Viewfinder left-to-right
position fixing ring
To fit the viewfinder
Reverse the removal procedure. (You need not hold
Adjusting the viewfinder position
the viewfinder stopper up.)
To adjust the viewfinder left-to-right position, loosen
the left-to-right fixing ring, and to adjust the front-to-
back position loosen the front-to-back position locking
knob.
Left eye adaptor
By fitting a left eye adaptor, you can use the
camcorder with your left eye to the viewfinder.
Viewfinder left-to-right
position fixing ring
Note
Viewfinger front-to-back
You cannot stow the camcorder attached with a left
eye adaptor in the LC-DS500 Carrying Case.
position locking knob
For details, consult your Sony dealer.
Chapter 2 Fitting and Connections
41
Using Accessories
Fitting the 5-inch Electronic Viewfinder
How to fit
You can fit the optional DXF-51/51CE (5-inch)/(DXF-
41/41CE (4-inch)) Electronic Viewfinder. To fit, the
following parts are required.
Remove the cover of the grip and attach the shoe and
stopper screw (accessory shoe kit).
VF Cable
Required parts to fit
Name
Part No.
Accessory Shoe Kit
A-8274-968-B
Shoe a)
Fixing ring
Adaptor cable (8-pin y 20-pin) 1-783-665-11
(DXF-41/41CE only)
Stopper
Guide
screw a)
8-pin
For details, contact your Sony dealer.
20-pin
Adaptor cable (8-pin y 20-pin)
a) Supplied with the Accessory Shoe Kit
Fitting to a Tripod
First fit the VCT-U14 Tripod Adaptor to the tripod,
then mount the camcorder on the tripod adaptor.
Removal
Hold down the red button
and pull the lever in the
direction of the arrow.
Note
VCT-U14 Tripod Adaptor
After removing the camcorder, if the tripod adaptor pin
has not returned to its original position, hold down the
red button and move the lever in the direction of the
arrow to return the pin to its original position. It is not
possible to mount a camcorder with the pin left out.
Tripod
Slide the camcorder
forward along the slot, until
it clicks firmly into place.
Pin
42
Chapter 2 Fitting and Connections
Using an Optional Microphone
Fitting the optional CAC-12 Microphone Holder
Remove the two retaining screws (M3 × 8) for the
optional microphone holder, then use these screws to
attach the CAC-12 Microphone Holder.
Screws removed from the
camcorder
CAC-12
Fitting an optional microphone
Use the following procedure to attach an optional
ECM-670 Microphone.
1 Loosen the screw of the CAC-
12 Microphone Holder, then
open the holder and replace the
microphone adaptor with the
one supplied with the ECM-
670 Microphone.
Microphone adaptor
2 Insert the microphone in the
microphone holder, close the
holder, and tighten the screw.
Connect the microphone cable
to the MIC IN +48 V
MIC IN +48 V connector
Mark
connector.
Chapter 2 Fitting and Connections
43
Using Accessories
Fitting optional microphones (operable with a
48 V supply) other than the ECM-670
Use the same fitting procedure as for the ECM-670,
but note the following differences with respect to the
microphone adaptor.
ECM-672: no microphone adaptor required.
Slender microphones (19 mm (3/4 inch) diameter):
use the microphone adaptor supplied with the
CAC-12.
Using a Video Light
You can use the Anton Bauer Ultralight 2 or
equivalent for this comcorder. Use a video light
powered by 12 V with maximum power consumption
of 30 W.
camcorder is supplied with 12 V or more power
(through the DC IN connector or battery pack). The
brightness or color temperature of the light will not
change according to voltage increase.
• If you connect the video light to the video light
connector 9 on the camcorder (page 27) and set the
LIGHT switch 3 to AUTO (page 16), you can turn
the light on and off automatically as you start and
stop the VCR operation.
Notes
• Do not use a video light with power consumption of
over 30 W.
• The brightness or color temperature of the light will
change when the supplied voltage is under 12 V.
• The output of the video light connector on the
camcorder is controlled to 12 V even when the
To fit the video light
When using a video light with a long cable
You can pass part of the cable through the camcorder
grip.
Fit the video light to the camcorder grip or the
accessory shoe on the viewfinder and connect the
video light cable to the video light connector.
Projection B
Projection A
1 Remove the cover of the
camcorder grip and break off
projection A (see the figure).
2 Pass the cable through the grip
as shown in the figure and
replace the cover.
44
Chapter 2 Fitting and Connections
When using equipment other than this
camcorder for power supply
Break off projections A and B on the camcorder. (See
step 1 of the previous section “When using a video
light with a long cable”.) Insert the cable into the grip
from the front hole and take out from the rear hole as
shown in the figure.
Fitting the Shoulder Strap
This section describes the procedure for fitting the
supplied shoulder strap to the camcorder.
1 Fit one of the clips to a
Pull up the strap to
lock the fiting.
shoulder strap fitting.
g
Clip
2 Fit the other clip to the
shoulder strap fitting on the
other side of the grip in the
same way.
Chapter 2 Fitting and Connections
45
Using Accessories
Removing the shoulder strap
g
Press here to release.
Connecting to Audio System
For connecting an intercom adaptor, see page 48.
The camcorder is able to record sound not only from
the attached microphone but also from a wireless
microphone or an external audio system.
Using a wireless microphone system
For details on using the wireless microphone system, see the
operating instructions for the microphone and tuner.
You can use the wireless microphone system including
a WRT-810A/830A UHF Wireless Microphone and a
WRR-810A/855A/860A UHF Portable Tuner to record
sound.
To connect a WRR-855A
1 Open the cover of the WRR
connector.
WRR connector
WRR
2 Insert the WRR-855A into the
CA-WR855.
Fasten the screws (supplied with
the WRR-855A).
46
Chapter 2 Fitting and Connections
3 Fit the attachment plate on the
rear side of the CA-WR855 to
the V-groove on the battery
attachment interface, and then
slide the CA-WR855 down
until it connects to the WRR
connector.
CA-WR855
4 Set one of the AUDIO IN (CH-
1/CH-2) switches to
WIRELESS.
To connect a WRR-810A/860A
Attach the WRR tuner fitting (not supplied) (Part No.
A-8278-057-A) to the rear of the camcorder as shown
in the following figure.
2,3
4
5
1 4
WRR-810A/860A
1 Pass a screwdriver through the holes and tighten
4 Attach the holder kit (two fittings and four screws,
supplied with the tuner) to the WRR tuner fitting
(one for the upper position and the other for the
lower position).
the screws .
2 Loosen the adjustment screws.
3 Adjust the metal fitting position for a battery pack
to be attached, and tighten the adjustment screws
to fix its position.
5 Mount the tuner on the WRR tuner fitting.
For details about the WRR tuner fitting (Part No. A-8278-
057-A), contact your Sony dealer.
Chapter 2 Fitting and Connections
47
Using Accessories
Using an external audio system
Connect an audio mixer or other external audio system
component to the AUDIO IN CH-1/CH-2 connector as
shown below.
AUDIO IN (CH-1/CH-2) switches: Set to REAR.
CH-1
CH-2
AUDIO IN
FRONT
REAR
VJ MIC
WIRELESS
Input selection switch: Set to LINE.
+48V ON
LINE
MIC
AUDIO IN
CH-1/CH-2
To audio mixer, etc.
Connecting a CA-370 Intercom Adaptor
You can connect a CA-370 Intercom Adaptor to this
unit to enable intercom communications.
Location and Function of Parts
1 LEVEL knob
Adjusts the volume of intercom communications.
2 INTERCOM connector (mini-jack)
1 LEVEL knob
Connect the optional DR-100 Intercom Headset.
2 INTERCOM connector
48
Chapter 2 Fitting and Connections
Connecting the CA-370 Intercom Adaptor
to this camcorder
Fit the attachment plate on the read side of the CA-370 to
the V-groove on the battery attachment interface, and then
slide the CA-370 down until it connects to the WRR
connector.
CA-370
WRR connector
Using the Optional LC-DS500
Carrying Case
For details on using the carrying case, refer to the
instruction manual supplied with the carrying case.
Using the Optional LC-DS300SFT
Soft Carrying Case
For details on using the soft carrying case, refer to the
instruction manual supplied with the soft carrying
case.
Chapter 2 Fitting and Connections
49
Connections
Connecting a Number of Camcorders
When using two or more synchronized camcorders,
connect an external sync signal to the GEN LOCK IN
connector, supplying a VBS or BS signal. The
camcorder will then operate synchronized to this
signal.
Note
When you fit the optional DSBK-501/501P, set the
VIDEO IN to CAM using the basic menu page 4. (see
page 93.)
You can adjust the synchronization using the basic
menu page 5. (See page 94.)
BNC cable
Example 1: Camcorder 2 synchronized
to the signal from camcorder 1
DSR-370/370P/570WS/570WSP
Camcorder 2
DSR-370/370P/570WS/570WSP
Camcorder 1
Portable VTR
GEN LOCK IN
VTR/CCU
VIDEO OUT
VIDEO OUT
To camera
connector
To video input
connector
CCZ-A Camera Cable
BNC cable
Example 2: Camcorders 1 and 2 synchronized to the signal
from a special effects unit or similar
DSR-370/370P/570WS/570WSP
Camcorder 1
VIDEO OUT
GEN LOCK IN
BNC cable
Video input connector
Sync signal output
connector
BNC cable
Special effects
unit or similar
DSR-370/370P/570WS/570WSP
Camcorder 2
Video input connector
BNC cable
BNC cable
VIDEO OUT
Sync signal output
connector
GEN LOCK IN
50
Chapter 2 Fitting and Connections
Connecting an External VCR
You can connect the following external VCRs to the
VTR/CCU connector (26-pin) or the DV OUT
connector for recording.
Notes
• Although power can be supplied to the camcorder
from an external VTR, the camcorder may not
operate correctly in some such cases, depending on
the power supply capacity of the VTR. It is
recommended that you power the camcorder from a
battery pack or from an external power supply.
• The VTR/CCU connector always outputs the signals
from the camera. (The playback video of the internal
VCR cannot be output.)
• When no VCR is connected to the VTR/CCU
connector (26-pin), it does not supply signals.
• A hub cannot be used to control a VCR connected to
the DV OUT connector, because the REC command
is not transmitted to the external VCR when a hub is
used.
Connecting cable
Connector
VCR
VTR/CCU
connector
CCZ-A Camera
cable (max. length
10 m (33 ft.))
BVW-50/50P/35/
35P (portable)
Digital
DV OUT
connector
i.LINK cable (DV
connecting cable)
(max. length
Videocassette
Recorder DSR-
20/20P/70A/
70AP/2000/
2000P, etc.
4.5 m (14 ft.))
However, a hub can be used to control this camcorder
from an external VCR.
Connecting an i.LINK Digital Cassette Recorder
When you connect an i.LINK-compatible digital VCR
(such as the DSR-70A/70AP) to the DV OUT
or dubbing. In this case, set the camcorder’s VTR
TRIGGER switch to INT ONLY.
connector of this camcorder using an i.LINK cable
(DV connecting cable), you can perform a cut editing
The camcorder begins to record when a REC
command is received from the connected VCR.
DSR-70A/70AP Digital
Videocassette Recorder
DSR-370/370P/570WS/570WSP
DV OUT
DV IN
i.LINK cable (DV connecting cable)
Notes
• When dubbing tapes using the DSR-70A/70AP, a
continuous recorded section of approximately five
seconds is required before the recording start point. It
is recommended to record color bars or a similar
signal beforehand at the start point of the source tape
to be dubbed on this camcorder.
• The camcorder does not support noiseless various
speed playback.
• To protect the tape, slow playback is automatically
cancelled if the slow playback lasts for about one
minute.
Chapter 2 Fitting and Connections
51
Connections
Connecting a Camera Control Unit
CCZ-A cable transmission distance when CCU
connected
The following table shows cable transmission lengths
when a CCU is connected to the DSR-370/370P/
570WS/570WSP.
You can connect CCU-M5A/M5AP Camera Control
Unit (CCU) to the VTR/CCU connector of this
camcorder.
Note the following when connecting a CCU.
• The only video signal formats that can be transmitted
from this camcorder to the CCU are VBS and R–Y/
B–Y/Y.
• A CCU cannot be used at the same time as a remote
control device connected to the REMOTE1 or
REMOTE2 connector of this camcorder.
Maximum transmission distance
Connected
viewfinder
Power not from CCU
Power from CCU
DXF-801/801CE 300 ma)
(1.5-inch type)
300 ma)
300 ma)
DXF-51/51CE
(5-inch type)
300 ma)
• When the camcorder is gen-locked to a CCU
reference signal, and then gen-locked to another
external reference signal, the other external reference
signal overrides the CCU reference signal for
camcorder gen-lock.
a) The maximum transmission distance of gen-lock signals
and return video is 150 m.
For details, contact your Sony dealer or a Sony service
representative.
• The REC/TALLY indicator on the front of the DXF-
801/801CE viewfinder lights only when a CALL
signal is received from the CCU. It does not light or
flash during VTR recording or on errors.
• The interface gain of microphone input is –20 dB.
• Three types of power supply are available for
powering the camcorder under CCU operation.
The camcorder uses power sources, if present, in the
order EXT DC IN >Battery Pack > CCU.
Before switching the camcorder power supply
between CCU and another power source, always turn
off the camcorder's Power switch.
(CCU or EX DC power is recommended for shooting
over extended periods.)
• Before using a CCU, set the camcorder’s EZ mode to
OFF (see page 17). (The advanced menu does not
appear unless it is set to OFF.)
• The color matrix switching function of the CCU-
M5A/M5AP does not work with this camcorder.
• When the OUTPUT/DL/DCC+ item on page 2 of the
advanced menu is set to DL, the knee adjustment
function of the CCU-M5A/M5AP does not work.
52
Chapter 2 Fitting and Connections
Power Supply
The following power supplies can be used with this
camcorder.
• AC power (The AC-550/550CE, AC-DN1, AC-
DN2B or CMA-8A/8ACE AC Adaptor is required.)
• BP-L40/L40A/L60/L60A/L90/L90A lithium-ion
battery pack
• BP-M50/M100 nickel metal hydride battery pack
• NP-1B Ni-Cd Battery Pack (The DC-L1Battery
Adaptor is required.)
Alternatively, you can make combined use of internal
and external batteries, by mounting one of the above
batteries as an internal battery and connecting an
external battery that can be a BP-90A contained in a
DC-210 Battery Adaptor and connected to the DC IN
connector of the camcorder.
• BP-90A Ni-Cd Battery Pack (The DC-L90 Battery
Adaptor is required.)
Using a BP-L40/L40A/L60/L60A/L90/L90A/M50/M100 Battery Pack
With a battery pack, the camcorder will operate
continuously for the time shown below.
• At low temperatures, the usable time of battery packs
decreases. When the ambient temperature is 0°C
(32°F), usable time decreases by about 10%.
(However, the usable time is affected by the power
consumption of the camcorder in addition to the
usage status of the battery packs.) The usable time of
battery packs increases if they are warmed to the
room temperature (about 20°C (68°F)) before use at
low temperatures.
DSR-370/370P
BP-L40/L40A: Approx. 80 minutes
BP-M50: Approx. 100 minutes
BP-L60A: Approx. 180 minutes
BP-M100: Approx. 230 minutes
BP-L90A: Approx. 290 minutes
• If you use the BP-L40/L40A at temperatures of 0°C
(32°F) or below, when power consumption of the
camcorder and accessories is 40 W or higher (due to
using a video light, for example), power may break
after a short time (a few minutes). To increase the
usable time, store the BP-L40/L40A in a warm place,
and power on the camcorder before the BP-L40/
L40A cools down.
DSR-570WS/570WSP
BP-L40/L40A: Approx. 70 minutes
BP-M50: Approx. 90 minutes
BP-L60A: Approx. 140 minutes
BP-M100: Approx. 200 minutes
BP-L90A: Approx. 230 minutes
• Compared to the BP-L40/L40A, the BP-L60/L60A/
L90/L90A offer better performance at low
temperatures. The BP-L60/L60A/L90/L90A are
recommended for use at low temperatures.
• Carrying a spare battery pack is recommended.
Before use, charge the battery pack with a BC-L50/
L100/L100CE/M50 Battery Charger.
Notes on using the battery pack
• A warm battery pack may not be fully recharged.
• Even when fully charged, battery packs gradually
lose their charge naturally. Use the battery packs as
soon as possible after recharging.
• To prolong the life of battery packs, store them in a
cool place (about 20°C (68°F)), and charge in a place
with an ambient temperature between 10°C and 30°C
(50°F to 86°F).
The BP-L40/L40A/L60/L60A/L90/L90A is free from
memory effect. There is no need to discharge it fully
before recharging.
• Before long-term storage, discharge the battery fully.
This extends the battery life if the battery is of the
lithium-ion type.
• It is recommended that the BP-L40/L40A be used at
30 W or less. The specified capacity may not be
obtained if it is connected to the camcorder with
accessories which is operated at 30 W or higher,
especially when the ambient temperature is low.
Chapter 2 Fitting and Connections
53
Power Supply
Attaching the battery pack
1 Press the battery pack against
the rear of the camcorder,
aligning the side line of the
battery pack with the line on
the camcorder.
BP-L40/L40A/L60/L60A/L90/L90A/
M50/M100
Align these lines.
LOCK
2 Slide the battery pack down
until its “LOCK” arrow points
at the matching line on the
camcorder.
LOCK
Matching line on the
camcorder
“LOCK” arrow
When the external battery begins to fail and
an internal battery pack is also used
Remove the DC output cable of the external battery
from the DC IN connector. The power source will
switch to the internal battery pack.
Detaching the battery pack
When the external battery begins to fail and
an internal battery pack is not used
Holding the button in, pull the
battery pack up.
First load the camcorder with a fully charged internal
battery pack, then remove the DC output cable of the
external battery from the DC IN connector. The power
source will switch to the internal battery pack. To use
an external battery again, connect a fully charged
external battery to the DC IN connector before
unloading the internal battery pack. The power source
will switch to the external battery.
LOCK
Avoiding breaks in operation due to dead
batteries
Continuous operation when operating with
only an internal battery pack
First, connect a fully charged external battery to the
If you use both an internal battery pack and an external
battery connected to the DC IN connector at the same
time, you can avoid breaks in operation due to the dead
batteries.
DC IN connector, then change the internal battery.
Notes
• Whenever an internal battery pack is loaded and an
external battery is connected to the DC IN connector,
the external battery is always used as the power
source.
• There may be some noise on the video or audio signal
at the instant the power sources are switched.
54
Chapter 2 Fitting and Connections
Using an AC Adaptor
Using the Anton Bauer
Intelligent Battery System
Using a CMA-8A/8ACE AC Adaptor
You can equip the camcorder with a special battery
mount which the Anton Bauer Corporation has
developed for its Intelligent Battery System and
Ultralight System.
When the camcorder is used with an Anton Bauer
Digital Magnum series battery, the remaining battery
capacity is shown numerically in the viewfinder
display.
Connect the camcorder to the AC power supply as
shown in the following figure, and turn the POWER
switch of the CMA-8A/8ACE ON.
To AC power source
CMA-8A/8ACE
AC Adaptor
Contact your Sony dealer for more information.
POWER switch: ON
LOCK
CCQX-3 cable
CAMERA/CCU
DC IN
Using an AC-DN1 AC Adaptor
Mount the AC-DN1 on the camcorder in the same way
as a battery, then connect to the AC power source.
To AC power
source
Note
When power consumption of the camcorder and
accessories is 38 W or higher, use the AC-DN2A/
DN2B AC adaptor (lower than 150 W).
Chapter 2 Fitting and Connections
55
Chapter
3
Shooting
Basic Procedure for Shooting
RET button
ZEBRA button
Focusing ring
POWER switch
FILTER control
VTR button
1 Power the camcorder.
2 Set the FILTER control appropriately for the
lighting conditions.
(Continued)
Chapter 3 Shooting
57
Basic Procedure for Shooting
11Setup the VCR section according to your shooting
Filter setting
Lighting conditions
objectives, then start recording.
1 (3200)
Studio halogen lighting (incandescent),
sunrise and sunset.
• During recording, the REC/TALLY indicator(s)
in the viewfinder light(s), and “REC” appears on
the viewfinder screen.
• Depending on the setting of the REC TIME
switch (see page 24), you can display the total
recording time or the length of the current cut on
the viewfinder screen.
2 (5600K +
Sunlight.
1
/
8
ND)
Use it to prevent hunting1) or to reduce the
depth of field2).
3 (5600K)
Cloudy or rainy outdoor shooting, and
fluorescent lighting.
4 (5600K +
1/64ND)
Sunlight.
Use it to prevent hunting1) or to reduce the
depth of field2).
• You can use the AUDIO LEVEL knob on the
front to manually adjust the channel 1 audio level.
To do this, you must first set up the VCR section
to enable manual adjustment of the audio
recording level.
3 Check the switch settings on the camcorder. (See
pages 15 to 30).
If there is not sufficient time to check the
camcorder settings, you can use “EZ mode” by
setting the EZ MODE button ON. The camcorder
is automatically adjusted to standard settings, and
the iris and the white balance are adjusted
automatically. (See page 104.)
12To pause recording, press the VTR button again.
Using the DynaLatitude Function
4 Check the settings in the basic menu (page 92) and
advanced menu (page 98).
This function detects the bright and dark parts of the
subject and automatically adjusts for the appropriate
contrast. The DynaLatitude function enables fine-
grained contrast adjustment according to the
5 Check the lens settings (pages 39 and 40) and
flange focal length adjustment (page 133).
luminance level of each pixel. It is effective when
shooting scenes with mixed light and dark parts.
6 Adjust the eyepiece focus, and the contrast and
brightness of the viewfinder image (page 132).
7 Check the sound system settings.
• Microphone connections
• Settings on the VCR section
8 If required, switch on the center marker and/or
safety zone (basic menu page 6 and advanced
menu page 4) and zebra pattern (ZEBRA button) in
the viewfinder image.
DL OFF
DL ON
However, the brightness of the subject on the screen
may change if the subject moves during shooting.
Also, for some subjects, there may be increased noise
in dark sections of the picture.
9 Adjust the white balance (page 126) and black
balance (page 129).
For information on turning this function on and off, see
page 100. For information on setting effect levels, see page
93.
10Turn the focusing ring so that the subject is
sharply in focus. It may be convenient to use the
EZ FOCUS button for the “EZ focus” function (see
page 16).
..........................................................................................................................................................................................................
1) Hunting: This occurs if the automatic iris function is not
able to reach a stable state, and as a result the image
brightness keeps changing, alternately lighter and darker.
2) Depth of field: This is the range over which the subject
is sharply in focus.
58
Chapter 3 Shooting
Recording
Notes on using cassettes
Usable Cassettes
• Before storing the cassette, rewind the tape to the
beginning and be sure to put the cassette in its storage
case, preferably on end instead of flat on its side. The
storage case of a DVCAM cassette is specially
designed to eusure a long-period storage of the tape.
Storing a cassette in any other condition (not
rewound, out of its case, etc.) may cause the video
and audio contents to become damaged over time.
• If the cassette memory connector (contact point)
becomes dirty, connection problems may occur and
cause a loss of functions. Remove away any dust or
dirt from this area before using the cassette.
• If the cassette is dropped on the floor or otherwise
receives a hard impact, the tape may become
slackened and may not record and or play back
correctly. For instructions on removing tape slack,
see next page.
This camcorder can use the DVCAM cassettes listed
below.
Model name
Size
PDV-64*/94*/124*/184*/34*
Standard size
Mini size
PDVM-12*/22*/32*/40*
The * in each model name is actually “ME”
(indicating that a cassette memory is contained), or
“N” (indicating that no cassette memory is contained).
The numbers in the model names show maximum
recording/playback time (minutes) for each model. For
example, the maximum recording/playback time of the
PDV-184ME is 184 minutes.
Note
• Follow the instructions on page 61 to insert a
cassette, or the camcorder may be damaged.
If you insert an incorrect type of cassette, it will be
automatically ejected.
Preventing accidental erasure
DVCAM cassettes
Set the REC/SAVE switch to SAVE to prevent
accidental erasure of recorded contents.
The following figure illustrates the DVCAM cassette’s
appearance.
REC/SAVE switch
Set to SAVE
Standard size
Mini size
REC
SAVE
Cassette memory
REC/SAVE switch
If you insert a cassette into the camcorder when this
switch is set to SAVE, the camcorder will not record
when you press the REC button.
For ClipLink shooting, a DVCAM cassette including
“cassette memory” is necessary. In the cassette
memory, data required for editing the recorded video
(ClipLink log data) is stored. This unit can record or
play back the cassettes with cassette memory of 16
kbits or less.
To enable recording
Set the REC/SAVE switch back to REC.
For details of ClipLink log data, see “ClipLink Shooting”
(page 77).
Chapter 3 Shooting
59
Recording
Checking the tape for slack
Turn the reel gently in the direction shown by the
arrow. If the reel does not move, there is no slack.
Insert the cassette into the cassette holder, close the
cassette holder, and after about 10 seconds take it out.
Paper clip, etc.
See page 61 on how to insert a cassette.
Reel
Recording on the Internal VCR
This section describes basic recording operations using
the internal VCR.
• When using a tape recorded by this camcorder to
transfer digital (video/audio/time code) signals at four
times the normal speed from the DSR-85/85P Digital
Videocassette Recorder to the ES-7 EditStation for
editing purposes, there must be about at least 40
seconds of recording on the tape before the IN point.
To perform editing without problems, it is
recommended that you pre-record at least 40
seconds of color bar signals at the beginning of the
tape.
• When dubbing tapes using the DSR-70A/70AP, a
continuous recorded section of approximately five
seconds is required before the recording start point. It
is recommended to record color bars or a similar
signal beforehand at the start point of the source tape
to be dubbed on this camcorder.
Notes
• When you will not perform ClipLink shooting, set the
ClipLink function to oFF in the VCR menu. (See
page 123 for menu setting and see page 77 for details
of ClipLink shooting.)
• Before shooting, mount or connect any required
equipment or accessories and check the power
supply. (See Chapter 2 “Fitting and Connections”.)
Also, it is desireable to make sure for problems in
camcorder’s internal operations using the auto-check
function. (See “Using Auto-Check Function —Menu
210” on page 121.)
1 3
2
1
4
60
Chapter 3 Shooting
1 Set the POWER switch to ON and check the
following items in the display window.
Indication and steps
Item to check
See also
How is the battery?
BATT E [xxxxxx] F: The battery is fully charged.
If two or fewer marks appear and the indication is blinking,
replace the battery.
“8 Display window” (page 19)
Make sure that the
window. If it is shown, replace the lithium battery.
is not shown in the display
Has the lithium battery
been inserted and is it
charged?
“Inserting and Replacing the
Lithium Battery” (page 37)
Li
Make sure that the “HUMID” indication is not shown in the
display window. If it is shown, do not use the equipment until
the “HUMID” indication disappears.
Is there a condensation
problem?
“Condensation” (page 143)
Inserting a mini-size cassette
2 Press the EJECT button to open the cassette
holder, and insert the cassette.
Stage
Make sure that the cassette’s REC/SAVE switch is
set to REC, then check for tape slack before
loading the cassette.
For details on handling cassettes, see “Usable
Cassettes” on page 59.
Inserting a standard-size cassette
PUSH
Indication “PUSH”
Cassette holder window
Guides
Mini-size cassette
match marks
PUSH
Indication “PUSH”
Lock
Cassette holder window
Insert the cassette with the cassette window (on the front) facing
outward. Push the cassette between the both guides along the
stage until it goes under the lock.
Insert the cassette with the cassette window (on the front)
facing outward.
Press “PUSH” on the cassette holder solidly to
close the holder.
(Continued)
Chapter 3 Shooting
61
Recording
Notes
operation buttons inoperable, press on the “PUSH”
indication again to make sure that the cassette holder
is solidly closed.
• Turn the power on and then insert or eject the
cassette.
• When inserting a mini-size cassette, confirm the
cassette is under the lock (see the above figure), and
then close the cassette holder. If the cassette is not
inserted fully under the lock, a stopper will prevent
the cassette holder from closing when you press
down on it.
• Internal parts of the camcorder may become bent or
otherwise damaged if you attempt to close the
cassette holder after inserting a mini-size cassette in
the wrong direction (such as with the cassette turned
backside front so the reel holes face the cassette
holder window or with the cassette turned sideways
so that a short side enters first).
Do not insert cassette sideways.
CL
• If
appears in the display window when the
cassette is loaded, it means that data has already been
recorded into the cassette memory. If you record
under this condition whether the ClipLink function is
available or not, the existing cassette memory data
will be overwritten. To avoid this, insert a new
cassette.
• After inserting the cassette, close the cassette holder
solidly by pressing on the “PUSH” indication on the
holder. Unless the cassette holder is closed solidly,
the tape will not be loaded and the tape operation
buttons will not function. If you find the tape
Do not insert cassette backside front.
3 Make the switch settings shown in the figure
below.
LIGHT
ON
WARNING
OVER dB OVER
PB DATE NDF EXT-LK
HOLD
0
OFF
-12
-20
H
MIN
SEC
FRM
CL CONT IP
DVCAM
RESET
CLIP
TAPE
BATT
DIAG
DISPLAY
-30
-40
COUNTER
TC
U-BIT
E
F
Li
-•
F
32k
48k
F8
8
1
2
RF SERVO HUMID SLACK
(MENU SET)
MENU
ADVANCE
SHIFT
REC TIME SKIN DTL
EXT VTR
OUTPUT
TTL
DUR
OFF
ON
OFF
COMPONENT.
VBS
Y/C
AUDIO LEVEL
AUDIO SELECT
(CH-1/CH-2)
TTL RESET
SET
PRESET
F-RUN
SET
MONITOR SELECT
VTR
TRIGGER
AUTO
MAN
CH-1
MIX
CH-2
EXT
REGEN
PARALLEL
INT ONLY
EXT ONLY
switches: AUTOa)
AUDIO SELECT
CH-1 CH-2
AUDIO IN
LITHIUM BATT
DATE/TIME
R-RUN
ClipLink
CONTINUE
HYPER
GAIN
SETUP
FRONT MIC
LOW CUT
MONITOR OUT
CHARACTER
FRONT
ON
OFF
FILE
STD
ON
OFF
VJ MIC
WIRELESS
ON
OFF
REAR
a) When one of these switches is set to MAN, the
recording volume can be manually adjusted. For
details, see “Manually adjusting audio recording
level” on page 63.
b) For details, see “Setting the Time Code Value” on
TC mode switch 2: F-RUN or R-RUNb)
TC mode switch 1: PRESETb)
page 73.
62
Chapter 3 Shooting
4 Display menu 212 and select the audio recording
During recording, the tape transport buttons
(EJECT, REW, F FWD, PLAY, and STOP) cannot
be used.
mode (two-channel mode or four-channel mode).
For menu operation, see “Selecting Audio Recording
Mode — Menu 212” (page 123).
Operation
Step
To view image
being shot
• Look into the viewfinder.
• Connect a video monitor to the
MONITOR OUT connector or S
VIDEO OUT connector.
Note
One of the following warning indications appears
in the display area when you change the audio
mode setting during recording pause.
To listen to audio
track being shot
Connect an earphone to the
EARPHONE connector
or listen to the audio from the
speaker.
Status
Warning indication
Fs 48k (flashes four
times per second)
Attempting to switch from 32-kHz
mode (four-channel mode) to 48-kHz
mode (two-channel mode).
To pause recording Press the VTR button on the
camcorder or lens.
For instructions on continuing to
record after a pause, see “Back
Space Editing” (page 67).
Attempting to switch from 48-kHz
mode (two-channel mode) to 32-kHz
mode (four-channel mode).
Fs 32k (flashes four
times per second)
To stop recording
Press the VTR button on the
camcorder or lens, then press the
STOP button.
The recordings at switching points prevent editing.
Avoid changing the audio mode once you have
started recording.
With this state, it is impossible to start
back space editing.
To remove the
cassette
Check that the power is on, then
press the EJECT button to open the
cassette holder and remove the
cassette. Close the cassette holder.
5 Set up the camcorder to suit your recording
objectives, and press the VTR button on the
camcorder or lens.
Recording begins when the TALLY indicator stays
lit after blinking for a moment.
Manually adjusting audio recording level
1 In step 3 above (“Recording on the Internal
VCR”), set the AUDIO SELECT (CH-1/CH-2)
switches to MAN (see page 62).
2 While checking the audio level in the display
window, turn the AUDIO LEVEL (CH-1/CH-2)
knob for the channel being used for microphone or
wireless microphone system connection (CH-1 or
CH-2) so that the maximum audio level is under
0 dB.
LIGHT
WARNING
OVER dB OVER
PB DATE NDF EXT-LK
HOLD
ON
OFF
0
-12
-20
H
MIN
SEC
FRM
Audio level
indications
CL CONT IP
RESET
CLIP
TAPE
BATT
DIAG
DISPLAY
-30
-40
DVCAM
COUNTER
TC
U-BIT
E
F
Li
-•
F
32k
48k
F8
8
1
2
RF SERVO HUMID SLACK
(MENU SET)
AUDIO LEVEL
(CH-1/CH-2)
knobs
MENU
ADVANCE
SHIFT
REC TIME SKIN DTL
EXT VTR
OUTPUT
TTL
DUR
OFF
ON
OFF
COMPONENT.
VBS
Y/C
AUDIO LEVEL
TTL RESET
SET
PRESET
F-RUN
SET
MONITOR SELECT
VTR
TRIGGER
AUTO
MAN
CH-1
MIX
CH-2
EXT
REGEN
PARALLEL
INT ONLY
EXT ONLY
AUDIO SELECT
LITHIUM BATT
DATE/TIME
R-RUN
CH-1
CH-2
ClipLink
CONTINUE
HYPER
GAIN
SETUP
FRONT MIC
LOW CUT
MONITOR OUT
CHARACTER
AUDIO IN
FRONT
REAR
ON
OFF
FILE
STD
ON
OFF
VJ MIC
WIRELESS
ON
OFF
Chapter 3 Shooting
63
Recording
When the battery is getting exhausted
Recording on an External VCR
Using the VTR/CCU Connector
(26-pin) or DV OUT Connector
When the battery is getting exhausted, the BATT
indication in the display window blinks once a second
(see page 20). Replace the battery with a charged
battery immediately.
If you continue to use the low battery, the BATT
indication will blink four times a second, and the
operation will stop.
Set the VTR TRIGGER switch as follows when
operating this unit to control an external VCR
connected to the VTR/CCU connector or the DV OUT
connector.
Simultaneous recording on the external and
internal VCR: PARALLEL
For description of how to replace batteries, see “Power
Recording on the external VCR: EXT ONLY
Supply” on page 53.
Note
For information about connectable VCRs, see “Connecting
an External VCR” (page 51).
Turn the POWER switch OFF before replacing the
battery.
Notes
• When the VTR TRIGGER switch is set to INT
ONLY, the camcorder controls only the internal VCR
even if an external VCR is connected.
Recording External Video
Signals
• When external VCRs are connected to the VCR/CCU
and DV OUT connectors, both VCRs operate in the
same way under the control of the VTR button of this
camcorder or of the lens.
When the optional DSBK-501/501P Analog
Composite Input Board is fitted to this camcorder, you
can record external video signals.
If you do not want to operate an external VCR
connected to the DV OUT connector, set the iLINK
CTL item on page 3 of the advanced menu to OFF.
• When external equipment, such as VCR, is connected
to the DV OUT connector, the ClipLink and the
audio fade-in/fade-out function during recording do
not work.
1 Connect the external video signals to the GEN
LOCK IN/VIDEO IN Connector.
2 Set VIDEO IN to EXT using basic menu page 4.
For details, see “Viewfinder Basic Menu” on page 92.
3 Press the EJECT switch to open the cassette
Note about simultaneous use of an external
VCR connected to the VTR/CCU connector
(26-pin) and an RM-M7G Remote Control Unit
connected to the REMOTE connector (10-pin)
About 15 seconds are required after the camcorder and
an external VCR are powered on for control of the
camcorder from a remote control unit to become
possible.
holder, and insert the cassette.
4 Press the VTR button on the camcorder or lens.
The camcorder starts recording.
Notes
This limitation does not apply to the external VCR if it
is powered on after you have confirmed that the
camcorder can be controlled from the remote control
unit.
• If the external video signals include noise, such as
jitter, the camcorder may not record signals properly.
• When recording external analog video signals, signals
are not output from the S VIDEO OUT connector.
• When recording external analog video signals, setup
log data is not recorded on the tape (see page 115).
64
Chapter 3 Shooting
To operate either VCR during recording,
change the VTR TRIGGER switch setting. Both
VCRs continue recording at the time of switching.
Setting to INT ONLY: The camcorder can
operate only the internal VCR.
Recording on the internal and external
VCRs simultaneously
1 Set the switches as shown in the table below.
Setting to EXT ONLY: The camcorder can
operate only the external VCR.
Switch
Setting
PARALLEL
VTR TRIGGER switch
EXT VTR OUTPUT switch
Set depending on the
connected VCR.
Note
When two external VCRs are connected using the
VTR/CCU connector and the DV OUT connector,
both VCRs operate identically in response to
operations with this camcorder or with the lens
VTR button.
2 For an external VCR connected to the VTR/CCU
connector, put the VCR into the recording paused
state.
If the tape on one of the VCR ends, exchange the
cassette and then resume recording by external
VCR operations.
For an external VCR connected to the DV OUT
connector, do one of the following, depending on
the setting of the iLINK CTL item on page 3 of the
advanced menu.
Set to ALL: Put the VCR into either the stopped
or recording paused state.
Recording on the external VCR only
Set to REC/P: Put the VCR into the recording
paused state.
1 Set the VTR TRIGGER switch to EXT ONLY.
2 For an external VCR connected to the VTR/CCU
connector, put the VCR into the recording paused
state.
3 Press the VTR button on the camcorder or lens.
The both VCRs start recording simultaneously.
For an external VCR connected to the DV OUT
connector, do one of the following, depending on
the setting of the iLINK CTL item on page 3 of the
advanced menu.
To pause recording, press the VTR button on the
camcorder or lens again.
The both VCRs go into the recording paused state.
Set to ALL: Put the VCR into either the stopped
or recording paused state.
Set to REC/P: Put the VCR into the recording
paused state.
If either VCR comes to end of tape during
recording, one VCR stops at the end of the tape,
and the other will continue recording. To restart
simultaneous recording, perform the following.
When the internal VCR has run out of tape:
Change the cassette, and press the VTR
button on the camcorder or lens.
When the external VCR has run out of tape:
Change the cassette, and start recording with
the controls on the external VCR.
3 Press the VTR button on the camcorder or lens.
The external VCR starts recording.
To pause recording
Press the VTR button on the camcorder or lens.
Note
After replacing the cassette on the external
VCR, do not press the VTR button on the
camcorder or lens, as this will pause the
internal VCR.
Chapter 3 Shooting
65
Recording
Using the viewfinder to see playback
pictures
To see playback pictures of the internal VCR
Press the PLAY button.
To see playback pictures of an external VCR
For an external VCR connected to the VTR/CCU
connector: Press the RET button on the lens when
the internal VCR is recording or no cassette is
loaded in the internal VCR. While holding down
the RET button, you can see the return video from
the external VCR.
For an external VCR connected to the DV OUT
connector: With the VTR TRIGGER switch of
this camcorder set to PARALLEL or EXT
ONLYand with the internal VCR stopped or
having no cassette loaded, start playback on the
external VCR.
Note
Depending on the VCR model, an external VCR may
not output return video when INPUT SELECT is set to
i.LINK on the external VCR. In this case, set INPUT
SELECT to another position.
66
Chapter 3 Shooting
Back Space Editing
This section describes the steps for recording several
scenes continuously.
If there is a long period before shooting
the next scene
1 Follow steps 1 to 5 (pages 60 to 63) in the
procedure “Recording on the Internal VCR” to
begin recording.
Once put the camcorder into recording pause mode, it
waits a certain (user-definable) period of time and then
automatically switches to standby-off mode. When the
camcorder is in standby-off mode, it takes time for the
recording to start after pressing the VTR button.
To continue the time code that has been recorded
on the tape, set the TC mode switch 2 to R-RUN in
step 3 (page 62).
For details on setting the timeout value for automatic
switching to standby-off mode, see “Setting Standby-On
Period — Menu 207” on page 120.
For details of time codes, see “Setting the Time Code
Value” on page 73.
2 When you have finished recording a scene, press
Starting Back Space Editing at
Any Tape Position
the VTR button on the camcorder or lens.
This pauses the recording operation.
This section describes the steps for inserting a new
scene at any desired position on the tape.
The following steps can also be used to restart
recording after an interruption has occurred.
Note
Do not do any of the following before the next
scene is shot as it will interrupt the recording
(the recording will not be continuous).
• Remove the cassette.
• Transport the tape (play, rewind, fast forward).
• Press the STOP button.
1 Perform step 1 (page 61) in “Recording on the
Internal VCR”.
• Replace the battery when the camcorder is
powered.
2 Insert the cassette containing the previous
recording.
3 When you are ready to shoot the next scene, again
3 Perform steps 3 and 4 (pages 62 and 63) in
press the VTR button on the camcorder or lens.
“Recording on the Internal VCR”.
This restarts the recording operation.
To continue from the last time code of the previous
recording, set TC mode switch 1 to REGEN.
4 Repeat steps 2 and 3 for each scene to be shot.
For details about time codes, see “Setting the Time
Code Value” on page 73.
Operation
Step
4 Press the PLAY button.
Restart an
See next section “Starting Back
interrupted recording Space Editing at Any Tape Position”.
(see step 2 above)
The recorded contents are displayed on the
viewfinder screen.
Check the recorded See “Checking the Recorded
contents
Contents Immediately After Shooting
—Recording Review” on page 70.
Operation at playback Step
Stop recording
Press the VTR button on the
camcorder or lens, then press the
STOP button.
Fast forward the tape
Rewind the tape
Press the F FWD button.
Press the REW button.
Chapter 3 Shooting
67
Back Space Editing
• If the POWER switch is turned on and off repeatedly.
• If the camcorder is left powered off for several hours.
• If the camcorder is subject to severe vibration while
powered off.
• If for any other reason the automatic recording
continuity function is unable to operate correctly.
• If the lithium battery (CR2032) is exhausted, or if no
lithium battery has been fitted.
STOP button
REW button
PLAY button
F FWD button
Using the Edit Search Function
While Back Space Editing
STOP
REW
PLAY
F FWD
EJECT
You can use the edit search function to find the desired
tape location when continuing to record from any other
location on the tape. Press and hold one of the EDIT
SEARCH buttons to activate the search playback
function for as long as you hold down it.
5 Press the STOP button when the tape reaches the
position where the new recording will start (see the
figure above).
1 Turn on the power, then insert a cassette into the
VCR.
This stops the tape.
2 Perform steps 2 to 12 in “Basic Procedure for
6 Press the RET buttonon the lens.
Shooting” (page 57).
This rewinds the tape slightly and runs it until the
continue point (specified by step 5), then sets the
camcorder to recording pause state.
3 Press and hold either of the EDIT SEARCH
buttons (REV or FWD).
7 Press the VTR button on the camcorder or lens.
This starts recording.
The edit search function enables you to search for the
continue position. For details, see next section.
Note
If you turn the POWER switch off during recording, or
when recording is paused, the camcorder automatically
goes through its shut-down sequence, then powers off.
When you next turn the POWER switch on, the
camcorder automatically finds the point at which
recording ended, and sets itself up so that you can
carry in with continuous recording. Note that this
operation takes several seconds: do not turn the
POWER switch is turned off or replace the battery
during this interval, as the automatic recording
continuity will be lost.
REV button
FWD button
The tape is moved in reverse or forward search
mode for as long as you hold down the REV or
FWD button, and the image is shown in the
viewfinder.
Note also that the recording continuity is lost in the
following cases.
68
Chapter 3 Shooting
To change the playback speed
The following indication appears on the screen.
Press the REV or FWD button down firmly into
the inner position to make the tape move at the
faster speed. Press the button down lightly to
make the tape move at the slower speed.
Note
Do not shut off the power while using the edit
search function. The VCR may not be able to find
the continue point.
For details of the playback operation, see page 70.
4 Release the REV or FWD button when you find
the tape location where you wish to continue
shooting.
4 Press the MENU dial when you see the image you
want to freeze.
The frozen playback image is displayed, mixed
with the shooting image, in monochrome. The
indication “FREEZE MIX ON” appears on the
screen.
The VCR enters recording pause mode.
5 Press the VTR button on the camcorder or the lens.
The VCR starts recording.
Using the Freeze Mix Function
The freeze mix function superimposes a freeze-frame
image of a previously recorded shot on the shooting
image displayed on the viewfinder screen.
You can use this function to easily frame a subject
within the same framework from a previous shot.
To release the freeze mix mode, press the MENU
dial again.
Note
To change the freeze-frame image
Press the PLAY button.
Use the tape transport buttons to find the desired
image and then perform step 4 again.
When the camcorder is in EZ mode, the freeze mix
function is disabled. Press the EZ MODE button to
release the EZ mode beforehand. (See page 17.)
1 Connect a color monitor to the MONITOR OUT
connector and set the MONITOR OUT
CHARACTER switch to ON. (It is not necessary
to set the MONITOR OUT CHARACTER switch
to ON when using only the viewfinder for freeze
mix operation.)
5 Once you have framed your subject, press the
MENU dial to cancel the freeze mix function.
6 Find the recording start point or insert a new
cassette for recording, then begin recording.
Notes
2 Perform steps 2 to 10 from “Basic Procedure for
• If you use the tape transport buttons during back
space editing, the back space editing mode will be
stopped. When you were using the ClipLink function
at shooting, if you simply restart the recording you
will lose any ClipLink data that was recorded. To
avoid this, press the ClipLink CONTINUE button
before restarting recording.
Shooting” (page 57).
3 Play back the tape on which the image to be used
for framework alignment has been recorded, and
press the MENU switch to ON position.
• Signals are not output from the DV OUT connector
while using the freeze mix function.
Chapter 3 Shooting
69
Playback — Checking Recorded Contents
Checking the Recorded Contents
Immediately After Shooting
— Recording Review
Immediately after shooting, you can use the recording
review function to automatically rewind and play back
the last 2 to 10 seconds of the recording to check the
recorded contents.
STOP button
REW button
PLAY button
Performing recording review
With recording paused, press the RET button on the
lens.
F FWD button
STOP
REW
PLAY
F FWD
EJECT
Depending on how long you hold down the button, the
tape is automatically rewound over the last 2 to 10
seconds of the recording, and then this last part of the
recording is shown in the viewfinder. You can also
listen to the recorded sound via an earphone or the
speaker. After the recorded part is played back, the
camcorder is automatically returns to the pause state.
Operation
Step
Fast forward the tape
Rewind the tape
Stop the tape
Press the F FWD button.
Press the REW button.
Press the STOP button.
Notes
Note
• During recording review, do not turn the POWER
switch off. The camcorder may not be able to find the
continue point.
If two or more series of Index Pictures are recorded
separately on the tape, they may be played back at
back space editing points.
• When the ClipLink function is set to oFF and you
press the VTR button on the camcorder or the lens
during recording preview, the recording preview is
halted and recording starts. In this case, back space
editing is not possible.
For details about Index Pictures, see “ClipLink Shooting”
(page 77).
• When a CCU (camera control unit) is connected, the
lens RET button does not function for recording
review.
Viewing Color Playback
Using a color television or color video monitor, you
can view a color playback (with no playback adaptors).
Connect a color television or color video monitor to
the MONITOR OUT connector or the S VIDEO OUT
connector.
Viewing Monochrome Playback
in the Viewfinder
See the previous section “Viewing Monochrome
Playback in the Viewfinder” for playback operation.
You can view a monochrome playback of the
recording in the viewfinder.
1 Turn the power on.
2 Load a cassette.
3 Press the PLAY button.
This starts playback, during which a monochrome
playback of the recording is shown in the
viewfinder.
70
Chapter 3 Shooting
Setting Time Values
The camcorder uses three types of time values: counter 2 Press the RESET/(MENU SET) button.
values, time code values, and user bits.
The time value is displayed in the viewfinder screen
and in the display window.
This resets the counter shown in the viewfinder
and display window as “0:00:00:00”.
The counter value starts advancing as the tape is
transported. It shows negative values if the tape is
rewound past the point where the counter was
reset.
LIGHT
WARNING
OVER dB OVER
PB DATE NDF EXT-LK
HOLD
ON
OFF
0
Time value
indication
-12
-20
H
MIN
SEC
FRM
RESET
CLIP
TAPE
BATT
DIAG
CL CONT IP
DVCAM
DISPLAY
-30
-40
COUNTER
TC
U-BIT
E
F
Li
-•
8
F
32k
48k
1
2
RF SERVO HUMID SLACK
F8
(MENU SET)
Note
DISPLAY
switch
Discontinuous recording in the tape may cause the
counter to malfunction during playback.
Use the DISPLAY switch to switch time value
indications.
Displaying the date/time
Type of time value
DISPLAY switch setting
The camcorder automatically records the real time of
the built-in clock on the tape in addition to time codes
and video/audio signals.
Perform the following steps to display the date or time
instead of the time value.
Counter of tape transport time COUNTER
Time code
User bits
TC
U-BIT
Note
The time code and user bits cannot be displayed if the
tape does not have time code and/or user bits
recordings or if the time code was recorded using a
non-compatible method.
1 Confirm the following.
Parts to confirm
State
Display window
The VCR menu is not displayed.
TC mode switch
1/2
Set the position other than
PRESET/SET.
For details of the time value indication in the viewfinder, see
page 87.
2 Set the DISPLAY switch to TC or U-BIT.
Resetting the counter
3 Press the SHIFT button.
The counter value shows the tape’s running time in
hours, minutes, seconds, and frames format. Before
starting a tape, perform the following steps to reset the
counter.
While pressing the SHIFT button, the date or time
is displayed at the location of the time value
indication.
DISPLAY switch setting
Indication
Time
TC
Counter
U-BIT
Date
LIGHT
WARNING
OVER dB OVER
0
PB DATE NDF EXT-LK
HOLD
ON
OFF
For description of how to set the built-in clock, see
“Setting the Real Time Clock and Calendar
— Menu 101” on page 119.
-12
-20
H
MIN
SEC
RESET
CLIP
TAPE
BATT
DIAG
CL CONT IP
DISPLAY
-30
-40
DVCAM
COUNTER
TC
U-BIT
E
F
Li
-•
1
F
32k
48k
F8
8
2
1
2
RF SERVO HUMID SLACK
(MENU SET)
1 Set the DISPLAY switch to COUNTER.
The time value indication in the display window
shows the current counter value.
Chapter 3 Shooting
71
Setting Time Values
Setting the User Bit Value
You can set the user bits as eight-digit hexadecimal
values (base 16) to have the date, time, scene number,
and other information inserted into the time code.
When using both the time code and user bits, set up the
user bits first. If you set the time code first, the internal
time code generator will remain stopped while you set
the user bits, which will set the time value off from the
original setting.
Note
Setting the user bit value may be disallowed in some
cases at ClipLink shooting. For details, see step 4 on
page 78 in “ClipLink Shooting”.
4
LIGHT
WARNING
OVER dB OVER
HOLD
PB DATE NDF EXT-LK
ON
OFF
0
-12
-20
H
MIN
SEC
FRM
CL CONT IP
DVCAM
RESET
CLIP
TAPE
BATT
DIAG
DISPLAY
-30
-40
COUNTER
TC
U-BIT
E
F
Li
-•
F
32k
48k
F8
8
1
2
RF SERVO HUMID SLACK
1
(MENU SET)
MENU
ADVANCE
SHIFT
REC TIME SKIN DTL
EXT VTR
OUTPUT
TTL
DUR
OFF
ON
OFF
COMPONENT.
VBS
Y/C
AUDIO LEVEL
TTL RESET
SET
PRESET
F-RUN
SET
MONITOR SELECT
VTR
TRIGGER
AUTO
MAN
CH-1
MIX
CH-2
EXT
REGEN
PARALLEL
INT ONLY
EXT ONLY
AUDIO SELECT
LITHIUM BATT
DATE/TIME
R-RUN
CH-1
CH-2
ClipLink
CONTINUE
HYPER
GAIN
SETUP
FRONT MIC
LOW CUT
MONITOR OUT
CHARACTER
AUDIO IN
FRONT
REAR
ON
OFF
FILE
STD
ON
OFF
VJ MIC
WIRELESS
ON
OFF
2 3
1 Set the DISPLAY switch to U-BIT.
The user bits indication appears.
Operation Step
Select a
digit
Press the SHIFT button.
Each time you press the SHIFT button,
the next digit to the right starts blinking.
Change a
value
Press the ADVANCE button.
2 Set the TC mode switch 1 to PRESET.
3 Set the TC mode switch 2 to SET.
Each time you press the ADVANCE
button, the displayed value is
incremented to F and returns to 0.
Reset
Press the RESET/(MENU SET) button.
This causes the left-most digit in the user bits
indication to start blinking.
The display returns to “00 00 00 00”.
Hexadecimal digits A to F are displayed as
follows.
4 Set the user bits.
Hexadecimal digit
A
B
C
D
E
F
Display
A
b
C
d
E
F
5 Perform step 6 in “Setting the Time Code Value”
on page 74.
72
Chapter 3 Shooting
Setting the Time Code Value
For details of setting user bits, see “Setting the User Bit
Value” on previous page.
This section describes the steps for setting time code
recording methods for particular shooting conditions
and setting initial values.
When using both the time code and user bits, setup the
user bits first. If you set the time code first, the
internal time code generator will remain stopped while
you set the user bits, which will set the time value off
from the original setting.
Note
Setting the time code value may be disallowed in some
cases at ClipLink shooting. For details, see step 4 on
page 78 in “ClipLink Shooting”.
5 4
LIGHT
WARNING
OVER dB OVER
HOLD
PB DATE NDF EXT-LK
ON
OFF
0
-12
-20
H
MIN
SEC
FRM
CL CONT IP
DVCAM
RESET
CLIP
TAPE
BATT
DIAG
DISPLAY
-30
-40
COUNTER
TC
U-BIT
E
F
Li
-•
1
F
32k
48k
F8
8
1
2
RF SERVO HUMID SLACK
(MENU SET)
MENU
ADVANCE
SHIFT
REC TIME SKIN DTL
EXT VTR
OUTPUT
TTL
DUR
OFF
ON
OFF
COMPONENT.
VBS
Y/C
AUDIO LEVEL
TTL RESET
SET
PRESET
F-RUN
SET
MONITOR SELECT
VTR
TRIGGER
AUTO
MAN
CH-1
MIX
CH-2
EXT
REGEN
PARALLEL
INT ONLY
EXT ONLY
AUDIO SELECT
LITHIUM BATT
DATE/TIME
R-RUN
CH-1
CH-2
ClipLink
CONTINUE
HYPER
GAIN
SETUP
FRONT MIC
LOW CUT
MONITOR OUT
CHARACTER
AUDIO IN
FRONT
REAR
ON
OFF
FILE
STD
ON
OFF
VJ MIC
WIRELESS
ON
OFF
2 3,6
1 Set the DISPLAY switch to TC.
2 Set the TC mode switch 1 to PRESET.
3 Set the TC mode switch 2 to SET.
The time code value can be set anywhere in the
range of “00:00:00:00” to “23:59:59:29” (DSR-
370/570WS) or “23:59:59:24 (DSR-370P/
570WSP).
5 For the DSR-370/570WS, use menu 204 to select
This causes the left-most digit in the time code
display to start blinking.
the frame mode.
Operation
Adjust the discrepancy bestrewn Select the drop-
time code value and real time frame mode.
Step
4 Set the time code initial value.
Need not adjust the discrepancy Select the non-
between time code value and real drop-frame mode.
time
Operation Step
Select a
digit
Press the SHIFT button.
Each time you press the SHIFT button,
the next digit to the right starts blinking.
For more information about the drop-frame/non-drop-
frame mode, see “Drop-frame mode (for DSR-370/
570WS only)” on next page.
Change a
value
Press the ADVANCE button.
Each time you press the ADVANCE
button, the displayed value increases.
Reset
Press the RESET/(MENU SET) button.
The display returns to “00:00:00:00”.
For details of menu operations, see page 119.
Chapter 3 Shooting
73
Setting Time Values
Restarting an interrupted recording
Perform the following steps to make the time code
continuous when the recording has been interrupted or
when the cassette tape has been removed from the
camcorder between shootings.
6 Use the TC mode switch 2 to set the desired
running mode.
Operation
Setting
Time code advances freely regardless of
F-RUN
the VCR’s current operation mode.
1 Set the TC mode switch 1 to REGEN.
Time code value advances only while
recording.
R-RUN
Time code advance is automatically set to R-RUN
even if the TC mode switch 2 has been set to F-
RUN.
If you select F-RUN, the time code starts
advancing immediately.
2 Perform steps 1 to 6 of “Starting Back Space
Drop-frame mode (for DSR-370/570WS
only)
Editing at Any Tape Position” on page 67.
When the camcorder is at the recording pause
state, the recorded time code is read from the tape
and synchronized to the internal time code
generator.
Time code is processed as 30 frames per second, but
the exact video frame frequency for NTSC signals is in
fact 29.97 frames per second. In prolonged recording,
this leads to a discrepancy between the time code and
the real time.
Drop-frame mode corrects for this by skipping two
frame counts at the beginning of every minute which is
not a multiple of ten.
3 Press the VTR button on the camcorder or lens to
restart back space editing.
Setting the time code to the real time
clock and calendar
Example: When the minute value is changing from
11 to 12
Set the TC mode switch 1 to DATE/TIME.
This synchronizes the time code generator to real time
(recorded in the user bits) and date (recorded in the
time code), using the real time clock and calendar set
in menu 101.
05:12:00:00
05:12:00:01
These two are dropped.
Once you set this switch to DATE/TIME position, it is
not possible to retrieve the previous value (user bits
and time code) in the time code generator.
In non-drop-frame mode, however, no frame counts
are omitted, and there is a gradual deviation of the time
code from real time.
For how to set the real time clock and calendar, see
“Setting the Real Time Clock and Calendar — Menu 101”
on page 119.
Making the time code continuous in back
space editing
Set the TC mode switch 2 to R-RUN and start back
space editing.
For back space editing operations, see “Back Space
Editing” on page 67.
74
Chapter 3 Shooting
Synchronization With External Time Code Signals — Gen-Lock
To edit and compile a recording that is shot using
multiple camcorders, it is necessary to synchronize the
video and time code of the various camcorders (by
gen-lock).
Note
Synchronization with external time code signals (by
gen-lock) may be disallowed in some cases at
ClipLink shooting. For details, see step 4 on page 78
in “ClipLink Shooting”
Connection for gen-lock
Connect the reference video and time code signals to
the camcorder as shown below.
Locking the video and time code signals to an
external reference signal
GEN LOCK IN
TC IN
Reference video signal
Reference time code signal
Locking the video and time code signals to
another camcorder’s video and time code
signals
If the reference camcorder is gen-locked to an external
reference signal, any other connected camcorders are
gen-locked to the same reference signal.
Using one camcorder as reference, to its video and
time code signals, lock the other camcorders’ video
and time code signals.
Composite video signal (used as reference video signal)
Time code signal (used as reference time code signal)
VIDEO OUTa)
Notes
Reference camcorder
TC OUT
• When connecting a number
of camcorders, power them
on beginning with the
reference camcorder.
TC IN
• The H phase and subcarrier
phase must be adjusted
when operating under
external synchronization.
For details, consult your
Sony dealer.
GEN LOCK IN
Locked camcorder
TC OUT
VIDEO OUTa)
a) The output signal from the MONITOR OUT connector on
the camcorder may discontinue when switching the
operation between recording and playback.
Use the output signal from the VIDEO OUT connector.
Chapter 3 Shooting
75
Setting Time Values
Locking the internal time code generator
to the reference time code
Perform the following steps to synchronize the
camcorder’s internal time code generator to an external
time code.
1 Set the TC mode switch 1 to PRESET.
2 Set the TC mode switch 2 to F-RUN.
3 Connect a reference time code and video signal to
the camcorder.
For connections, see the previous section “Connection
for gen-lock”.
“EXT-LK” will be displayed in the display
window. The internal time code generator will
maintain its externally synchronized state even
after you disconnect the reference time code signal.
The precision of this synchronization (phase
alignment) of time codes depends on the precision
of the camcorder’s sync signal generator.
Notes
• After setting up external synchronization, allow a few
seconds for the camcorder’s sync signal generator to
stabilize before recording.
• Only the time code can be externally synchronized.
User bits cannot be externally synchronized.
• If you turn the POWER switch on or off while the
camcorder is operating under external
synchronization, synchronization precision will be
reduced.
76
Chapter 3 Shooting
ClipLink Shooting
The ClipLink function is intended to be used at various
stages from recording to editing. When you record
using this function, Index Pictures are automatically
recorded along with the time code, scene number, and
other data, all of which make for more efficient
editing.
Notes
• When external equipment, such as a VCR, is
connected to the DV OUT connector, you cannot
shoot with ClipLink.
• On this camcorder, you can also use the ClipLink
function without recording Index Pictures. However,
if you perform ClipLink shooting on the unit without
fitting the optional DSBK-301A, the recorded tape
may occasionally cause malfunctions at ClipLink
continue on a DSR-1/1P.
When you perform ClipLink shooting for a system
that contains both the DSR-1/1P and this camcorder,
fit the optional DSBK-301A Index Picture Board to
this camcorder.
For an overview of the ClipLink function, see page 152.
To record Index Pictures, the optional DSBK-301A
Index Picture Board is required.
On how to attach the DSBK-301A, see the operating
instructions for the DSBK-301A.
LIGHT
WARNING
OVER dB OVER
PB DATE NDF EXT-LK
HOLD
ON
OFF
0
-12
-20
H
MIN
SEC
FRM
CL CONT IP
DVCAM
RESET
CLIP
2
3
DISPLAY
-30
-40
TAPE
BATT
DIAG
COUNTER
TC
U-BIT
E
F
Li
-•
F
32k
48k
F8
8
1
2
RF SERVO HUMID SLACK
(MENU SET)
MENU
ADVANCE
SHIFT
REC TIME SKIN DTL
EXT VTR
OUTPUT
TTL
DUR
OFF
ON
OFF
COMPONENT.
VBS
Y/C
2
AUDIO LEVEL
TTL RESET
SET
PRESET
F-RUN
SET
MONITOR SELECT
VTR
TRIGGER
AUTO
MAN
CH-1
MIX
CH-2
EXT
REGEN
PARALLEL
INT ONLY
EXT ONLY
AUDIO SELECT
LITHIUM BATT
DATE/TIME
R-RUN
CH-1
CH-2
AUDIO IN
ClipLink
CONTINUE
HYPER
GAIN
SETUP
FRONT MIC
LOW CUT
MONITOR OUT
CHARACTER
FRONT
REAR
ON
OFF
FILE
STD
ON
OFF
VJ MIC
WIRELESS
ON
OFF
1 Turn the power on and perform steps 2 to 10 in
Check point
Method
“Basic Procedure for Shooting” (page 57).
Check to see if the the
See “Selecting ClipLink
ClipLink function is on (or Function —Menu 211”
set it to on).
under “Setting on the VCR
Section —VCR Menu”
(page 123).
2 Perform steps 1 and 2 (page 61) in “Recording on
the Internal VCR”. Check the following points.
Check whether or not the
appears in the display
cassette includes cassette window when the loaded
memory. (The camcorder cassette includes cassette
supports cassettes with up memory. (The ClipLink
to 16 Kbits of cassette
memory.)
function cannot be used
unless appears in the
display window.)
Make sure that the lithium
battery has been correctly
inserted and is not used
up.
appears in the display
Li
window if the lithium
battery has not been
inserted or is used up.
Chapter 3 Shooting
77
ClipLink Shooting
CLIP and
appear in the display window.
from that data on ClipLink mode.
IP
• The number of recordable clips varies with
cassette memory capacity. Up to 45 clips (Index
Pictures) can be recorded in a 4-Kbit cassette
memory and up to 198 clips (Index Pictures) can
be recorded in a 16-Kbit cassette memory.
Display Meaning
CLIP
IP
The camcorder is in ClipLink mode.
The camcorder is in ClipLink mode and can
record Index Pictures (when the DSBK-301A
is fitted).
The following display appears on the viewfinder
screen.
3 Set the AUDIO SELECT (CH-1/CH-2) switch to
AUTO or MAN (see page 23).
4 Press the VTR button on the camcorder or the lens.
ClipLink mode
indication: CLIP
M or Ca)
Recording begins when the TALLY indicator stays
lit after blinking for a moment.
The camcorder enters ClipLink continue mode (in
which back space editing is possible using
ClipLink function) and indication CONT appears in
the display window.
Clip remaining
a) For details, see “Basic menu page 7” (page 95).
During recording, the time code (HH:MM:SS
format) at the recording start (Rec IN) point is
recorded into the camcorder’s internal memory.
Index Pictures are also recorded if you use the
DSBK-301A.
To record the cassette name/number
Access basic menu page 7 to specify a name or
number for the inserted cassette (see page 95).
Notes
• If you use a cassette that contains data recorded
via a different VCR when you enter a cassette
name/number in the cassette memory, you may
lose any data that was previously written to the
cassette memory. Also, if you use a cassette that
contains data recorded in ClipLink mode on the
camcorder for recording on a different VCR, you
may lose any data that was previously written to
the cassette memory.
• When you power the camcorder or insert a
cassette, black squares (x) blink in the place of
the clip remaining indication in the display
window (during this, the cassette memory data is
being checked). Start recording after the blinking
ends, or the ClipLink function will be disabled.
Note
When CONT appears, regardless of the setting of the
TC mode switch 1, the time code generator
automatically enters REGEN mode. Consequently,
you cannot freely specify a time code nor can you
use the external synchronization (genlock)
function.
5 To stop recording, press the VTR button on the
camcorder or the lens.
This sets recording pause mode.
The time codes (HH:MM:SS) for the current clip
(contents between the Rec IN and Rec OUT
points) are recorded along with the scene number
(as scene 001) in the cassette memory. The last
Index Picture in the recorded scene is also recorded
when the DSBK-301A is fitted.
CL
• When
appears in the display window, it
means that data has already been recorded into
the cassette memory. If you record under this
condition whether the ClipLink function is
available or not, the existing cassette memory
data will be overwritten. To avoid this, you can
either insert a new cassette or follow the
Note
While data is being recorded in the cassette
memory, cutting the power supply or opening the
cassette holder is disallowed. If you turn the
POWER switch off or press the EJECT button,
black squares (x) blink in the place of the clip
remaining indication in the display window. When
the data has been recorded, the power supply is cut
or the cassette is ejected.
procedure for appending cassette memory data, as
described in the section “Resuming Recording in
CL
ClipLink Mode” (page 81). If the
is flashing,
it means abnormality of the cassette memory. In
this case, it is impossible to continue recording
78
Chapter 3 Shooting
To continuously record the next scene
Repeat steps 4 and 5.
The scene number will be automatically incremented
Setting Editing Points While
Shooting
from the previous number.
You can use the TAKE button to record a time code
for a Cue point or a Mark IN/OUT point.
You can set or clear an “NG” designation for the
previously recorded scene before shooting the next
scene.
Setting Mark IN/OUT points as you shoot
If you have stopped the recording, see “Resuming
Recording in ClipLink Mode” (page 81).
The following data is recorded onto the cassette when
you specify Mark IN/OUT points while shooting
continuously at length, instead of during linked
recording of each scene.
Notes
• During recording pause, pressing the STOP/PLAY/F
FWD/REW buttons, performing edit search, or
ejecting the cassette will interrupt the ClipLink
shooting. With this state, it is impossible to start back
space editing using ClipLink function. (The ClipLink
• Time codes (HH:MM:SS) for Mark IN/OUT points
• Scene number: The scene number counter is
automatically incremented with each Mark OUT
point specification.
CONT
continue mode is canceled and indication
in the
• NG specification, cassette name/number
• Index Pictures for all Mark IN points (when the
DSBK-301A is fitted): these are recorded each time
recording is stopped.
display window disappears.) To perform back space
editing at the recording stop position, press the
ClipLink CONTINUE button before resuming
recording. If you do resume recording without
pressing this button first, the previous recorded data
(and Index Pictures) will be overwritten or otherwise
invalidated.
• Each time you press the STOP button, the number of
remaining clips is decremented by one. If you
resume recording with the same VCR, the number of
remaining clips is automatically incremented by one.
Note
The time codes for Rec IN/OUT points are not
recorded.
Perform the following procedure.
1 Perform steps 1 to 3 from “ClipLink Shooting”
(pages 77 and 78).
For details, see “Resuming Recording in ClipLink Mode”
(page 81).
2 Access basic menu page 7 and perform the
following operations.
• Do not unplug the power supply connector
(connected to a battery pack or AC outlet) while the
POWER switch is still set to ON, as this may cause
the ClipLink function to operate abnormally. Be sure
to set the POWER switch to OFF before
1) Set MARK/CUE to MARK.
The ClipLink mode indication “CLIP M”
appears on the viewfinder screen.
2) Set the cassette name or number if necessary.
disconnecting the power supply.
For details of menu operations, see “Basic Menu
Operations” (page 92).
3 Press the VTR button on the camcorder or lens.
The camcorder starts recording, and the REC/
TALLY indicator(s) light(s) in the viewfinder.
Chapter 3 Shooting
79
ClipLink Shooting
4 Press the TAKE button when you find a shot
Setting Cue points as you shoot
where you would like to set a Mark IN point.
The following data is recorded onto the cassette when
you specify a Cue point to highlight a scene.
• Time codes (HH:MM:SS) for Rec IN/OUT points
• Time codes (HH:MM:SS:frame) for Cue points
• Scene number: The scene number counter is
automatically incremented with each Rec OUT point
specification.
• NG designation, cassette name/number (if set from
the camcorder)
TAKE button
• Index Pictures for all Rec IN points (when the
DSBK-301A is fitted): these are recorded each time
recording is stopped.
The TAKE/TALLY indicator (orange) lights in the
viewfinder and “TAKE” appears on the screen.
5 Press the TAKE button when you find a shot
Perform the following procedure.
where you would like to set a Mark OUT point.
1 Perform steps 1 to 3 in “ClipLink Shooting”
The TAKE/TALLY indicator (orange) goes out in
the viewfinder and the “TAKE” disappears from
the screen.
At this time, the time code (HH:MM:SS) at the
Mark IN/OUT point for scene 001 is recorded to
the camcorder’s internal memory, and then
recorded to the cassette memory.
(pages 77 and 78).
2 Access basic menu page 7 and perform the
following operations.
1) Set MARK/CUE to CUE.
The ClipLink mode indication “CLIP C”
appears on the viewfinder screen.
2) Set the cassette name or number if necessary.
To set/clear NG
For details of menu operations, see “Basic Menu
Operations” (page 92).
If you press the NG button before you set the next
Mark IN point, the previous scene will be
designated as “NG” (“NG” appears on the screen).
Once NG has been set, you can cancel it by
pressing the NG button again before you set the
next Mark IN point (the “NG” on the screen
disappears).
3 Press the VTR button on the camcorder or lens.
The camcorder starts recording, and the REC/
TALLY indicator lights in the viewfinder.
4 Press the TAKE button when you find a shot
6 Repeat steps 4 and 5 as needed to record time
codes at Mark IN/OUT points, scene numbers, and
NG designations to cassette memory.
where you would like to set a Cue point.
The “CUE” indication appears (for about 1 second)
on the viewfinder screen. At this point, the time
code (HH:MM:SS:frame) at the Cue point is
recorded into the cassette memory.
The scene number is automatically incremented
each time you specify a Mark IN point.
7 To finish shooting, press the VTR button on the
5 Repeat step 4 to specify more Cue points.
camcorder or lens.
This stops the recording operation.
The Index Pictures of each Mark IN point are
recorded onto the tape (when the DSBK-301A is
fitted).
80
Chapter 3 Shooting
6 To finish shooting, press the VTR button on the
Time codes (HH:MM:SS) and scene number
(scene 001) are recorded to the cassette memory
and the Index Picture of the Rec IN point is
recorded onto the tape (when the DSBK-301A is
attached).
camcorder or lens.
This stops recording operation.
Resuming Recording in ClipLink Mode
During recording pause in ClipLink mode, pressing the
STOP/PLAY/F FWD/REW buttons, performing edit
search, or ejecting the cassette will interrupt the
ClipLink shooting. With this state, it is impossible to
start back space editing using ClipLink function. (The
ClipLink continue mode is canceled and indication
CONT in the display window disappears.) If you resume
recording on the same cassette, the previously recorded
data will be overwritten.
You can avoid this and continue recording in ClipLink
mode from the previous recording stop point by
performing the following steps.
Note
If you stop recording during the first ten seconds of
recording, you may not be able to use these steps to
continue recording in ClipLink mode.
1 3
2
1
4
1 Perform steps 2 to 10 in “Basic Procedure for
Shooting” (page 57) and step 1 (page 61) in
“Recording on the Internal VCR”.
3 Check the following points.
Result and response
Check point
If these indications do not appear in
the display window, access the
VCR menu and set ClipLink
CLIP and
IP
(when the DSBK-
301A is fitted)
appear in the
2 Insert a cassette if one is not already loaded.
function to on (see page 123).
display window
CL
The
and
indications should appear in the
Remaining clips Make sure there are enough
capacity for recording clips (see
page 21).
display window.
Note
CL
(Continued)
If the
is flashing, it means abnormality of the
cassette memory. In this case, it is impossible to
continue recording from that data on ClipLink
mode.
Chapter 3 Shooting
81
ClipLink Shooting
4 Press the ClipLink CONTINUE button.
When all Index Pictures are recorded at the end
of the recordings
The tape remaining indication in the display
window flashes as the camcorder automatically
searches the recording stop point. When it finds the
recording stop point, it stops and enters recording
pause mode.
Index Pictures
A
E
B
F
C
G
D
Recording stop
Recording restart
(ClipLink continue)
Once it has stopped, check that the CONT indication
appears in the display window.
Recording
Recording
start
stop
To find the recording stop point efficiently
If you press the ClipLink CONTINUE button after
rewinding or fast forwarding the tape to the
position between the previous recording’s start
point and stop points, the recording stop point can
more efficiently be found via an automatic search
function.
A
B
C
D
E
F
G
Clip
When two or more series of Index Pictures are
separately recorded
Two or more series of Index Pictures may be
recorded if ClipLink shooting is once interrupted
due to ejecting the cassette and resumed (in case of
changing the camcorder on resuming, for
example).
If the recording stop point cannot be found, the
CONT indication flashes in the display window.
5 Press the VTR button on the camcorder or the lens.
Index Pictures A
Index Pictures B
D E
A
B
C
F
G
This starts the recording function.
6 When the recording is finished, set recording pause
Recording Recording
mode (or specify a Mark OUT point).
stop
restart
Recording Remove
(ClipLink
continue)
Recording
stop
start
cassette.
The time code (HH:MM:SS), scene number (serial
number of scene during which recording was
stopped) and other data for the current clip
A
B
C
D
E
F
G
Clip
(contents between the Rec IN and Rec OUT points
or between Mark IN and Mark OUT points) are
recorded into cassette memory. The Index Pictures
for the recorded scene are recorded after the
recorded scene when the DSBK-301A is fitted.
Camcorder A
Camcorder B
Insert cassette in camcorder B.
If there is no need for ClipLink continue
Repeat steps 5 and 6 to start recording the next
scene.
It is not necessary to press the ClipLink CONTINUE
button when restarting recording.
See step 4 in the previous section “Resuming
Recording in ClipLink Mode”.
The Index Pictures are recorded onto the tape as
described below when the DSBK-301A is fitted.
The contents recorded on the cassette may differ in this
case depending on the settings when the recording is
restarted.
82
Chapter 3 Shooting
When recording in ClipLink mode is started and
previous recording is overwritten
Previous
New
recording
recording
Previous Index Pictures:
erased
New Index Pictures are
recorded (when the
DSBK-301A is fitted).
ClipLink log data: overwritten by new data
When recording in ClipLink mode is started after a
previous recording
Previous
recording
New
recording
New Index Pictures are
recorded (when the
DSBK-301A is fitted).
Previous Index Pictures:
retained but invalid
ClipLink log data: overwritten by new data
Chapter 3 Shooting
83
Chapter
4
Viewfinder Screen
Indications and Menus
Viewfinder Screen Indications
There are four types of indication screen which appear
in the viewfinder, as follows.
Changing the Viewfinder Display
• Normal indications
These show the operating state of the camcorder.
(See page 87.)
Use the dial and switches shown in the following
figure to switch the viewfinder display among the
normal indications, basic menu pages and advanced
menu pages.
• Status indications
Pressing the MENU switch up while the normal
indications are present calls a display of current
settings. (See page 90.)
• Basic menu
This provides settings for the lens iris, shutter speed
and so forth, and also a titling screen. (See the
section “Viewfinder Basic Menu” on pages 92 to 97.)
• Advanced menu
This provides settings for the center marker, zebra
pattern, viewfinder screen indications, and so forth.
(See the section “Viewfinder Advanced Menu” on
pages 98 to 106.)
MENU dial
POWER switch
MENU switch
Chapter 4 Viewfinder Screen Indications and Menus
85
Viewfinder Screen Indications
Displaying the normal indications and
switching to the basic menu
Status indications
Display by holding the
MENU switch up while
the normal indications
are present.
To display the normal indications, move the POWER
switch to the ON position.
To switch to and from the basic menu, use the MENU
switch or MENU dial.
“CHECK DIAG” appears before basic menu page 1
when the self diagnostic function has detected an
abnormality. (see page 97.)
Normal indications
Display by moving the
POWER switch to the
ON position.
Switch by pressing the
MENU switch down or
press and turn the
MENU dial downward.
Page 1a)
Page 2
Basic menu
Page 9b)
a) For the DSR-570WS/570WSP, when MENU MODE on page 9
of the advanced menu is set to 2, an aspect ratio (16:9/4:3)
switching menu appears before page 1 of the basic menu.
b) The menu configuration differs according to the camcorder’s
switch settings, the connected VCR, accessories (remote
control devices), and the type of input signal. A nine-page
configuration results when all of the basic menu pages are
displayed.
86
Chapter 4 Viewfinder Screen Indications and Menus
Viewfinder Normal Indications
During normal operation, the following items can be
indicated in the viewfinder.
1 VCR operation status indication
qs VCR warning indication
qd External VCR status
indication c)
2 TAKE/CUE indication
qf VCR recording mode
3 Recording time or time data
indication a)
indication c)
4 NG indication
qg White balance indication
5 Clip mode indication
qh SKIN DTL indication
qj EVS indication
6 Clip remaining indication
qk Lens f-stop indication a)
ql Gain indication a)
7 Status display area
8 EZ FOCUS indication
w; Filter setting indication a)
wa Clock indication a), b)
ws Voltage/error indication
9 LOW LIGHT indication a)
0 Audio recording level indicators a)
wd Shutter setting indication a)
qa Tape remaining indication a)
a) Whether or not to display can be selected by menu setting.
b) This is recorded over the picture being shot.
c) Displayed only when an external VCR is connected
• When the REC TIME switch is in the DUR position:
The duration of the current recording cut.
The significance of each of the indications shown in
the figure is as follows.
When there is an external VCR connected to the
VTR/CCU connector or the DV OUT connector, you
can switch the display as follows, according to the
setting of the VTR TRIGGER switch.
1 VCR operation status indication
This indicates the VCR’s current operation status
(REC, PLAY, etc.).
VTR TRIGGER switch
setting
Display
2 TAKE/CUE indication
PARALLEL or INT ONLY Recording time of the current
cut on the internal VCR
This displays a TAKE or CUE indication when using
the ClipLink function for recording.
TAKE: When recording in Mark mode, this
indication appears when a Mark IN point is set
and disappears when the next Mark OUT point is
set.
CUE: When recording in Cue mode, this indication
appears for about 1 second when a Cue point is
set.
EXT ONLY
Recording time of the current
cut on the external VCR
Note
Recording time for an external VCR (total recording
time, or recording time of the current cut) is
calculated based on the time that REC2 is displayed
in the external VCR status indication.
• When the REC TIME switch is in the OFF position
and the item TC IND in advanced menu page 6 is set
to “ON”: A time data value depending on the
DISPLAY switch settings as shown in the following
table.
3 Recording time or time data indication
This shows the following values.
• When the REC TIME switch is in the TTL position:
The total recording time. (When an external VCR is
connected, you can select whether to show the
recording time of the internal VCR or of the external
VCR using advanced menu page 4. See page 102 for
more information.)
Chapter 4 Viewfinder Screen Indications and Menus
87
Viewfinder Normal Indications
0 Audio recording level indicators
These show the recording levels of audio channels 1
and 2.
DISPLAY switch
setting
Time data displayed
COUNTER
TC
CNT: Tape transport time
TCG: a time code from the time code
generator
Channel 1
Channel 2
TCR: a time code from the time code
reader
U-BIT
UBG: a user bit value from the time
code generator
– ∞
–2 dB
0 dB
UBR: a user bit value from the time
code reader
qa Tape remaining indication
This shows the tape remaining as follows.
Time data values appear during playback, fast forward,
rewind, or recording review.
Indication
F-30
Tape remaining
At least 30 minutes
25 - 30 minutes
20 - 25 minutes
15 - 20 minutes
10 - 15 minutes
5 - 10 minutes
2 - 5 minutes
4 NG indication
30-25
An “NG” (No Good) indication appears if you
designate a recorded scene as “NG” when using the
ClipLink function for recording.
25-20
20-15
15-10
5 Clip mode indication
10-5
A “CLIP M” or “CLIP C” indication appears when
you use the ClipLink function for recording.
CLIP M: Indicates shooting in Mark mode
CLIP C: Indicates shooting in Cue mode
5-0
5-0 (flashing)
0 - 2 minutes
qs VCR warning indication
This shows warning indications about operation or
6 Clip remaining indication
status of the VCR.
The number of available clips is displayed when you
use the ClipLink function for recording.
Indication
NO TAPE
Meaning
There is no tape loaded.
7 Status display area
REC INHIBIT
The tape is in the recording inhibited
state.
One of the following values or messages is displayed
to indicate the camcorder’s current status or its
operation status.
The battery is almost exhausted.
The battery is exhausted.
LOW BATT
BATT END
• New values when changing camcorder’s settings
• Messages indicating progress or results of
adjustments
• The camcorder’s current settings
• SetupLog data recorded to a tape during shooting (see
page 115)
TAPE NEAR END The tape is near the end.
TAPE END
SERVO
HUMID
RF
The tape is at the end.
The servo lock has been lost.
There is condensation.
The video heads are clogged, or there
is some other fault in the recording
system.
8 EZ FOCUS indication
This appears when the EZ FOCUS button is pressed,
enabling the “easy focus” function.
The tape is not wound properly.
SLACK
MP TAPE
An incorrect type of cassette has been
loaded. (The cassette is automatically
ejected and the indication disappears
in about two seconds.)
Note
The status indication is not shown while this indication
appears.
CLIP DATA ERR
Abnormality of ClipLink log data in the
cassette memory data.
9 LOW LIGHT indication
This warning appears if the lighting level is
inadequate.
88
Chapter 4 Viewfinder Screen Indications and Menus
Meaning
Indication
Indication
Meaning
PARA
Simultaneous recording of the internal
and external VCRs
AUDIO 48kHz?
At back space editing, you are
switching from 32 kHz audio recording
mode (4-channel mode) to 48 kHz
audio recording mode (2-channel
mode).
INT
Recording on the internal VCR
Recording on the external VCR
EXT
AUDIO 32kHz?
At back space editing, you are
switching from 48 kHz audio recording
mode (2-channel mode) to 32 kHz
audio recording mode (4-channel
mode).
Note
Even if there is an external VCR connected to the DV
OUT connector, the above indications do not appear if
iLINK CTL on page 3 of the advanced menu is set to
OFF.
ERROR:91-13F
CLIP CONT?
Failure in loading or saving the
cassette memory data.
Asking whether you will continue
shooting in ClipLink mode or not when
the cassette contains ClipLink data.
(The indication disappears when you
press the ClipLink CONTINUE button
or start the next shooting without
pressing it.)
qg White balance indication
The following indications appear.
Indication Meaning
EZ
Operating in EZ mode (The ATW function is
selected.)
CLIP NEAR END At ClipLink shooting, capacity for only
1 to 3 clips remains.
ATW
The ATW function is selected (The ATW
button was pressed and the indication is lit.)
CLIP END
Impossible to record any more clip
shots.
W:A
W:B
W:P
W:M
White balance memory A is selected.
White balance memory B is selected.
Preset white balance is selected.
Note
Manual adjustment is performed remotely.
If the message appears other than above, contact your
Sony dealer.
qh SKIN DTL indication
This appears when the skin detail function is activated
(The SKIN DTL switch is set ON.)
qd External VCR (connected to the VTR/CCU
connector (26-pin) or DV OUT connector) status
indication (when an external VCR is connected)
Shows the external VCR operation status.
qj EVS indication
This appears when the EVS (Enhanced Vertical
definition System) function is enabled. (See page
130.)
Notes
• When the VTR TRIGGER switch is set to INT
ONLY, operation status is not shown for an external
VCR connected to the DV OUT connector, even if
that VCR starts recording.
qk Lens f-stop indication
This shows the f-stop of the lens.
• When there are external VCRs connected to both the
VTR/CCU and DV OUT connectors, REC2 is
displayed when either VCR starts recording.
• When iLINK CTL on page 3 of the advanced menu is
set to OFF, the status of an external VCR connected
to the DV OUT connector is not displayed.
Note
Depending on the lens being used, this indication may
differ slightly from the actual f-stop on the lens.
ql Gain indication
This shows the gain value, and the settings of the
HYPER GAIN switch (see page 100) and the DPR
(Dual Pixel Readout) function as shown in the
following table.
• Depending on the type of external VCR connected to
the DV OUT connector, status may not be displayed.
qf VCR recording mode indication (when an
external VCR is connected to the VTR connector
(26-pin) or DV OUT connector)
Shows recording mode of the internal and external
VCRs set by the VTR TRIGGER switch.
Chapter 4 Viewfinder Screen Indications and Menus
89
Viewfinder Normal Indications
If an error message appears, contact your Sony dealer.
Example indication Meaning
If using an Anton Bauer Intelligent Battery System
The remaining battery capacity is shown as a
percentage.
18 dB
Gain setting is 18 dB.
DPR 18 dB
The DPR function is enabled.
In this case the DPR function
approximately doubles the gain (an
increase of 6 dB) over the current
gain setting (in this case 18 dB).
wd Shutter setting indication
When the SHUTTER switch has been set to ON, the
basic menu page 1 setting for the item SHUTTER
(shutter speed, CLS frequency, EVS) is displayed here.
HYPER
The HYPER GAIN switch is in the
ON position.
In this case, regardless of the
current gain setting, the hyper gain
function increase the gain by a
factor of about 60 with respect to 0
dB (to 36 dB). In the case of the
DSR-570WS/570WSP, menu
switching allows the gain to be
increased by a factor of about 120
with respect to 0 dB (to 42 dB).
Status Indications
If you set the MENU switch to STATUS while a menu
is being displayed, the camcorder’s current setting
status will be shown in this display area.
w; Filter setting indication
This shows the setting of the FILTER control.
Indication
3200
Filter setting
1 (3200K)
56ND
2 (5600K + 1/8ND)
5600
3 (5600K)
56ND
4 (5600K + 1/64ND)
wa Clock indication
The clock indication is shown in one of the following
ways (according to the CLOCK IND setting of OFF,
CAM, or BARS in advanced menu page 8). (See page
105.)
a) When both the DCC+ and DynaLatitude
functions are set to OFF
Display
Description
OFF: Not displayed.
WHITE
White balance adjustment method
selection (PRE/A/B) and color
temperature during auto white
balance adjustment
CAM: Always displayed.
BARS: Displayed whenever color bars are
displayed.
If the clock indication is displayed during recording, it
is recorded onto the image.
A.IRIS
Iris adjustment method selection
(STD/SPOT L/BACK L)
SETUP FILE
DCC+ or DL
Setting of the SETUP switch (page
25)
ws Voltage/error indication
When power in the camcorder’s batteries grows low
and the error message LOW BATT appears, the
voltage is displayed. When power is normal, you can
view the voltage by pressing the MENU switch up to
the STATUS side and holding it there to view the
status indication.
For DCC+ indication: ON with the
OUTPUT/DL/DCC+ switch set to
CAM/DCC+ (DCC+ ON), and OFF
with the switch set to CAM/DL and DL
in advanced menu page 2 (page 100)
set to OFF (both DCC+ and
DynaLatitude OFF).
For DL indication: When setting the
OUTPUT/DL/DCC+ switch to DL and
DL in advanced menu page 2 to OFF
(DynaLatitude OFF), LOW, STD or
HIGH is displayed according to DL
LEV setting in basic menu page 2
(page 93).
An error message is displayed when an abnormality
has been detected by the auto diagnostic function
(page 97). If there is a voltage drop below 11.3 V DC
and an error has been detected, the low voltage
indication alternates at one-second intervals with the
error indication.
90
Chapter 4 Viewfinder Screen Indications and Menus
Notes
• Status indicators will not be displayed during EZ
mode.
• When the CCU function switch is set to TITLE ON,
the title display is given priority and the normal status
display (see page 86) does not appear.
However, the status display does appear while you
press the camcorder’s MENU switch up to the
STATUS side and hold it there.
Chapter 4 Viewfinder Screen Indications and Menus
91
Viewfinder Basic Menu
To display the basic menu pages, press the MENU
switch downward (to ON position) or press the MENU
dial while the normal indications are being shown in
the viewfinder. The basic menu configuration can
include up to nine pages. (The configuration depends
on the switch settings.)
Contents and Settings of Each
Menu Page
Each page’s contents and settings are described below.
Basic menu page 1
Basic Menu Operations
The common operations on all basic menu pages are
described below.
To change the page or item
The cursor is moved downward each time you press
the MENU switch down. Once the cursor has reached
the last item on a page, press down the MENU switch
to go to the next page. When the last page is being
displayed, pressing down the MENU switch returns
the display to the normal indications.
Item
Settings
A. IRIS
Sets a base value +1.0
for auto adjustment Negative adjustment values set a
of lens iris.
–1.0, –0.5, 0 (normal value), +0.5,
narrower lens iris and positive values
set a wider lens iris.
The cursor is moved upward each time you press up
the MENU switch. Once the cursor has reached the
first item on a page, pressing up the MENU switch
returns the display to the normal indications.
The cursor starts blinking when you press the MENU
dial. In this state, you can change the page or item by
turning the MENU dial.
DTL LEV
Sets the detail
(edge) emphasis.
–99 to 0 (normal value) to +99
Negative adjustment values soften the
image’s edges and positive values
sharpen them.
M. BLACK
Sets the master
pedestal level.
–99 to 0 (normal value) to +99
Negative adjustment values make
dark areas of the picture darker and
increase the contrast. Positive
adjustment values dark areas of the
picture lighter and reduce the
contrast.
To change settings
STRETCH
–16 to 0 (normal value) to +15
Sets black stretch/ This function adjusts the intensity of
compress value.
dark areas of the screen. Negative
values make these areas darker
(black compress) and positive values
make these areas brighter (black
stretch).
Align the cursor to the desired item using the MENU
switch and turn the MENU dial.
You can change settings only with the MENU dial.
Press and turn the MENU dial to align the cursor to the
desired item and press the MENU dial.
SHUTTER
DSR-370/570WS: 1/100 (normal
value), 1/250, 1/500, 1/1000,
1/2000, EVS, CLS (60.4 Hz to
200.3 Hz)
DSR-370P/570WSP: 1/60 (normal
value), 1/250, 1/500, 1/1000, 1/2000,
EVS, CLS (50.3 Hz to 201.4 Hz)
This selects either the shutter speed,
the scan frequency, or EVS for the
clear scan function. When the
SHUTTER switch is set to OFF, this
item cannot be set.
Sets shutter speed
or CLS/EVS
setting. (see page
130.)
To reset any item to its shipped settings, press the
MENU dial for 2 seconds.
For the DSR-570WS/570WSP, when MENU MODE
on page 9 of the advanced menu is set to 2, an aspect
ratio (16:9/4:3) switching menu appears before page 1
of the basic menu.
92
Chapter 4 Viewfinder Screen Indications and Menus
Basic menu page 2
Basic menu page 4
This is displayed when the optional DSBK-501/501P
Analog Composite Input Board is fitted to the
camcorder.
Item
Settings
0.0 to 0.5 (normal value) to 1.0
SKIN DTL
Sets the amount of Smaller values set a softer skin detail.
Item
Settings
skin detail
correction.
CAM (normal value)
Records the signal shot by this camcorder.
VIDEO
IN
Selects
the
DL LEV
Sets the
LOW, STD (normal value), HIGH
EXT
Set the amount of DynaLatitude
Records the signal input from the GEN LOCK IN/
VIDEO IN connector. The image on the
viewfinder and the signal output from the
MONITOR OUT connector are switched to the
external video signal. When inputting the external
video signal, “EXT INPUT” blinks on the screen.
signal
to be
DynaLatitude level. effects as high level, standard level
(STD), or low level.
recorded
onto the
internal
VCR.
PRE WHT
Sets the color
When the filter is 3200 or CROSS:
2200 to 3200 (normal value) to 4300,
temperature of the filter 5600K, 5600K + 1/8ND
preset white
balance.
When the filter is 5600K + 1/64ND:
4600 to 5600 (normal value) to 12000
Basic menu page 3
This is displayed when the SETUP switch has been set
to FILE.
If you set VIDEO IN to EXT and input the external
VBS signal from the GEN LOCK IN connector, the
image in the viewfinder and the signal output from the
MONITOR OUT connector are switched to the
external video signal. When inputting the external
video signal, “EXT INPUT” always blinks on the
screen.
For details of this operation, see “Setup Files” (page 108).
Notes
• When VIDEO IN is set to EXT, the video signals are
not output from the S VIDEO OUT connector.
• When VIDEO IN is set to EXT, the basic menu page
5 is not displayed.
• This page is not displayed when a CCU (camera
control unit) is connected.
Chapter 4 Viewfinder Screen Indications and Menus
93
Viewfinder Basic Menu
Item
Settings
Basic menu page 5
This menu is displayed when CAM is selected on the
basic menu page 4 and an external sync signal is input
to the GEN LOCK IN connector.
MARKER
Sets marker display ON/OFF.
ON (normal value), OFF
Markers are displayed
when this setting is ON
and is not displayed
when it is OFF.
When the setting is ON,
go to advanced menu
page 4 to select the type
of marker (see page
102).
DUR TIME
Sets the recording time.
00:00 to 59:59 (minute :
second)
Setting the recording time before
shooting helps you with making
scenes of equal duration.
When shooting with displaying
the recording time of the current
cut in the viewfinder (with the
REC TIME switch set to DUR),
the recording time indication
flashes to remind you that the
recording time has passed.
See “Setting the
recording time in
seconds”.
Item
Settings
SC PHASE
000 to 999
Sub carrier phase adjustment for
when the camcorder is genlocked.a)
H PHASE
000 to 135 (normal value)
to 199
Horizontal phase adjustment for
when the camcorder is genlocked.a)
a) This applies when using an external sync signal to
Setting the recording time in seconds
Move the cursor to DUR TIME, then press the MENU
dial.
synchronize operation of several camcorders (see page 50).
Note
This page is not displayed when a CCU (camera
control unit) is connected.
A value of seconds appears.
Basic menu page 6
If you turn the MENU dial when “59” is displayed, the
number under “MM” increased by one.
94
Chapter 4 Viewfinder Screen Indications and Menus
3 Turn the MENU dial until the desired character
Basic menu page 7
appears, and press it.
The character cycles through the following
sequence.
(Space)
4 Turn the MENU dial to move the text entry arrow.
5 Return to step 3 and repeat the text entry
Item
Settings
procedure.
MARK/CUE
MARK (normal value), CUE
Selects Mark mode See “ClipLink Shooting” (page 77).
6 After completing text entry, move the text entry
or Cue mode
cursor to the parenthesis position.
CHG REEL NO.
Sets the cassette
name/number
See “To set the cassette name/
number” below.
The display changes as follows.
To set the cassette name/number
Note
When using a cassette without cassette memory, you
cannot set the cassette name or number.
1 Load a cassette.
2 Press the MENU switch to move the cursor to
7 Check your cassette name/number setting, and
press the MENU dial if no more changes are
required. (To make changes or to abort the
procedure for this setting, return to step 2.)
CHG REEL NO., then press the MENU dial.
This writes the new cassette name/number to the
cassette memory, after which the display changes
as follows.
The cursor (→) changes to the text entry arrow (↓)
and the current cassette name/number is displayed.
(“NO TAPE” is displayed if you neglected to load
a cassette.)
Current cassette
name/number
Chapter 4 Viewfinder Screen Indications and Menus
95
Viewfinder Basic Menu
3 Press the MENU dial.
Basic menu pages 8 and 9
This brings up the cursor on the screen, and
switches to cursor transport mode.
You can create a title of up to four lines, each of
twelve alphanumeric or punctuation characters, and
then save it. It is then possible to record the title over
the picture while shooting.
Initial cursor position
Note
You cannot set the skin detail correction while a title is
displayed.
Entering the title (basic menu page 8)
1 Press the MENU switch or turn the MENU dial as
necessary to display basic menu page 8 (title
setting display) in the viewfinder.
4 Turn the MENU dial to move the cursor to the
position where you wish to insert a character.
To reverse the direction, turn the dial in the
opposite direction.
5 Repeat steps 2 to 4 until the title is complete.
If a title is already present, it appears on this
screen.
2 Press and turn the MENU dial until the desired
character appears.
The character cycles through the following
sequence.
6 Align the cursor to EXIT and press the MENU
dial.
(Space)
This displays basic menu page 8 again.
The title created is retained, even when you power
the camcorder off.
Press the MENU dial when the desired character
appears.
96
Chapter 4 Viewfinder Screen Indications and Menus
To record a title (basic menu page 9)
When “CHECK DIAG” is displayed
1 Access basic menu page 9 (title display).
The “CHECK DIAG” indication appears in the status
display area whenever the camcorder’s automatic self
diagnostic function detects an abnormality. Access
this page and perform error checking. (This page is
displayed as basic menu page 1.)
“CHECK DIAG” will also be displayed if there is a
problem on the sync signal input to the GEN LOCK
IN connector. Input a proper sync signal and then
perform error checking.
2 Press the MENU dial once.
The title is superimposed to the picture displayed
on the viewfinder screen.
3 Start shooting.
4 To stop the title recording, press the MENU switch
or MENU dial to clear the title display.
To perform error checking
Press the MENU dial.
When using the CCU-M5A/M5AP Camera Control Unit
The error checking performs on the digital signal
processing (DSP) and memory circuits and the results
are displayed.
When no error is detected, “OK” appears.
Example: If an abnormality is detected in the DSP
circuit.
When the CCU function switch is set to TITLE ON,
the title display is given priority and the normal status
display (see page 86) does not appear.
However, the status display does appear while you
press the camcorder’s MENU switch up to the
STATUS side and hold it there.
The error message “DIAG ERROR” appears when the
normal indications are displayed. If this message
appears, contact your Sony dealer.
Chapter 4 Viewfinder Screen Indications and Menus
97
Viewfinder Advanced Menu
Advanced Menu Operations
To reinitialize all settings in the advanced
menu to their factory defaults
See also the figure on next page.
1) Align the cursor to ALL RESET and press the
MENU dial. (The indication changes to “ALL
RESET SURE?”.)
To display the advanced menu
2) Press the MENU dial again. (The indication
changes to “ALL RESET OK” and reinitialization
completes.) To cancel the reinitialization, turn the
MENU dial (without pressing).
Move the POWER switch to the ON position while
holding down the MENU dial.
Note
The advanced menu does not appear when the
camcorder is in EZ mode.
Take the camcorder out of EZ mode first.
Note
When using the VCL-716BX Zoom Lens, after
performing the above operations, set LENS SEL (see
page 102) to 3.
To change the page
Align the cursor to the page number and press the
MENU dial so that the page number is blinking. Turn
the dial until the desired page.
To select items in a page
Press the MENU dial to blink the cursor, and press the
MENU switch to move the cursor among the menu
items. While the cursor is blinking, you can move the
cursor by turning the MENU dial.
To change settings
This operation is the same as for the basic menus.
For a description of basic menu operations, see
page 92.
98
Chapter 4 Viewfinder Screen Indications and Menus
The following example shows settings for the DSR-
570WS/570WSP. The settings are somewhat different
from those for the DSR-370/370P.
Normal indications
Move the POWER switch to
the ON position with the
MENU dial held down.
Turn the MENU dial.a)
Advanced menu
page 2
Advanced
menu page 1
Press the
MENU dial.b)
Align the cursor to
“ALL RESET” and
press the MENU dial.
Turn the
Advanced menu
page 3
Confirmation
screen
MENU dial.a)
Turn the MENU dial
(to cancel resetting).
Press the
MENU dial.b)
Press the MENU dial
(to cancel resetting).
Turn the
MENU dial.a)
Turn the MENU dial.
Advanced menu
page 9 c)
Turn the MENU dial.a)
a) Set the cursor to the page number (blinking) and turn the MENU
dial.
b) Set the cursor to EXIT MENU and press the MENU dial.
c) This page is not displayed for the DSR-370/370P. Therefore,
pages 10 to 15 are moved forward, becoming pages 9 to 14.
Press the
MENU dial.b)
Note
After page 1 of the advanced menu, some pages and items may
not be displayed, depending on the connected accessories
(remote control devices), type of input signal, switch settings,
and so on.
Chapter 4 Viewfinder Screen Indications and Menus
99
Viewfinder Advanced Menu
Contents and Settings of Each Menu Page
Advanced menu page 2
Each page’s contents and settings are described below.
The following example is for the DSR-570WS/
570WSP. HYPER is not displayed for the DSR-370/
370P.
Advanced menu page 1
Use this page to return all menu settings to their
factory preset values.
For details of this operation, see “Advanced Menu
Operations” (page 98).
Settings
Item
GAIN
This sets gain values for the positions of the GAIN switch.
The HIGH, MID, and LOW values must be set so that LOW
< MID < HIGH.
LOW
Sets the L position.
–3 dB, 0 dB (normal
value), 3 dB, 6 dB, 9 dB,
12 dB, 18 dB, 18 dB + DPR,
24 dB
Note
When using the VCL-716BX Zoom Lens, execute
ALL RESET and then set LEN SEL (see page 102) to
3.
MID
0 dB, 3 dB, 6 dB, 9 dB
(normal value), 12 dB,
18 dB, 18 dB + DPR, 24 dB,
24 dB + DPR
Sets the M position.
HIGH
Sets the H position.
3 dB, 6 dB, 9 dB, 12 dB,
18 dB (normal value),
18 dB + DPR, 24 dB, 24 dB
+ DPR, HYPER GAIN
HYPER
36 dB (normal value),
42 dB
Sets the HYPER position.
Displayed only for DSR-
570WS/570WSP.
DL
ON (normal value), OFF
When set to ON, the amount
of DynaLatitude effects is
set in the basic menu page 2
(see page 93).
Sets DynaLatitude function
ON/OFF. This setting is
valid only when the
OUTPUT/DL/DCC+ switch
has been set to CAM/DL.
For details on the
DynaLatitude function, see
page 58.
100
Chapter 4 Viewfinder Screen Indications and Menus
Item
Settings
Advanced menu page 3
AWB MEM
2 (normal value): No
Selects whether or not correspondence with FILTER
to make the FILTER
control settings. Only two
control settings (1 to 4) adjustment values (A and B) are
correspond to
separate white
balance adjustment
values stored in
memory.
stored in memory.
2 × 4FL: Correspondence with
FILTER control settings. Each of
the four control settings can be
used to set A and B adjustment
values, for a total of eight settings.
TONE
ON (normal value): Outputs
Selects whether or not audio signal.
a) For DSR-370P/570WSP: EBU75
to output a 1-kHz
audio signal with the
color bars when the
OUTPUT/DL/DCC+
has been set to
BARS.
OFF: Does not output audio
signal.
BARS
SMPTE (normal value for DSR-
370/570WS): Normal width
EBU75 (normal value for DSR-
370P/570WSP): EBU 75%
EBU100 (for DSR-370P/
Selects normal width
or narrower width for
color bars.
570WSP): EBU 100%
SPLIT (for DSR-370P/570WSP):
Not for normal operation
SNG: Narrower than normal (used
for satellite communications, etc.)
REMOTE1
REC (normal value): Specifies
recording start/stop.
MARK: Specifies a Mark IN/OUT
point.
CUE: Specifies a Cue point.
NG: Specifies NG/OK.
Sets a function for
switch 1 of the RM-
LG1 connected to the
REMOTE connector 1.
REMOTE2
REC: Specifies recording start/stop.
MARK (normal value): Specifies
a Mark IN/OUT point.
CUE: Specifies a Cue point.
NG: Specifies NG/OK.
Sets a function for
switch 2 of the RM-
LG1 connected to the
REMOTE connector 1.
BAUD RATE
9600, 38400 (normal value)
Sets a baud rate for a
computer connected
to the REMOTE
connector 2 (to be
supported in the future
version).
iLINK CTL
Selects whether to
control from the
camera the start and
stop of recording by
the external VCR
connected to the DV
OUT connector.
REC/P (normal value): When an
external VCR is recording or
recording paused, control from the
camera according to the setting of
the VTR TRIGGER switch.
ALL: When an external VCR is
recording, recording paused, or
stopped, control from the camera
according to the setting of the VTR
TRIGGER switch.
For the DSR-1500/1500P/1600/
1600P/1800/1800P/2000/2000P,
which cannot be set to recording
paused, set this item to ALL.
OFF: Do not control from the
camera.
Chapter 4 Viewfinder Screen Indications and Menus
101
Viewfinder Advanced Menu
Item
Settings
Advanced menu page 4
ZEBRA
Selects type of zebra
pattern display.
1 (normal value): Displays the
zebra pattern over parts having a
video level. between 70 and 90
IRE (or 70 and 90%).
Use the next item (ZEBRA1) to
select the base level.
a)
2: Displays the zebra pattern over
parts having video levels of 100
IRE or above (or 100% or above).
1/2: Dual display (both 1 and 2)
70 IRE (normal value) to 90 IRE
(DSR-370/570WS) or 70%
(normal value) to 90% (DSR-
370P/570WSP):
Can be set for each IRE step or
1% step.
a) For DSR-370P/570WSP: 70%
ZEBRA1
Sets base level for
zebra pattern 1.
Settings
Item
MARKER
CENT/90% (normal value):
Displays center marker and safety
zone marker at 90% size.
CENT/80%: Displays center
marker and safety zone marker at
80% size.
Selects ON/OFF
setting for center
marker, size setting,
and display ON/OFF
setting.
REC TIME
INT (normal value): Recording
time of the internal VCR
EXT: Recording time of the
external VCR connected to the
VTR/CCU connector (26-pin) or
DV OUT connector.
Selects whether to
show the recording
time (TTL) of the
internal VCR or of the
external VCR.
90%: Displays only safety zone
The safety zone value
differs as follows,
depending on the
LIMITS setting.
marker at 90% size.
80%: Displays only safety zone
marker at 80% size.
CENT: Displays only center
marker.
VF TALLY
×1: Uses only the upper REC/
TALLY indicator.
×2 (normal value): Uses two
REC/TALLY indicators.
Selects whether or not
to use more than one
REC/TALLY indicators
in the viewfinder
LIMITS set to OFF: %
value with respect to
viewfinder screen
(displayed only when
the DXF-801/801CE
viewfinder is attached).
LIMITS set to value
other than OFF: %
value with respect to
LIMITS value
LENS SEL
Select the types of the
lens.
1 (normal value), 2,3,4
For details, see “Designating the
lens” on page 134.
LIMITS
DSR-570WS/ • 16:9 mode
570WSP
OFF (normal value): Outputs
safety zone according to scan size.
4:3: 4:3 section safety zone
13:9: 13:9 section safety zone
14:9: 14:9 section safety zone
15:9: 15:9 section safety zone
• 4:3 mode
OFF (normal value): Outputs
safety zone according to scan size.
13:9: 13:9 section safety zone
14:9: 14:9 section safety zone
15:9: 15:9 section safety zone
16:9: 16:9 section safety zone
DSR-370/
370P
OFF (normal value): Outputs safety
zone according to scan size.
13:9: 13:9 section safety zone
14:9: 14:9 section safety zone
15:9: 15:9 section safety zone
16:9: 16:9 section safety zone
102
Chapter 4 Viewfinder Screen Indications and Menus
Advanced menu page 5
Advanced menu page 6
Item
SS INDa)
Settings
Item
AUDIO INDa)
Selects whether or not to
show the audio level
indication on the normal
indications.
Settings
3SEC: Displays shutter
setting for three seconds only
ON (normal value):
Displays.
OFF: Not display.
Selects the mode for
showing the shutter setting when the setting has been
when displaying the normal changed.
indications.
ALWAYS (normal value):
Displays the shutter setting at
all times.
TAPE INDa)
ON (normal value):
Displays.
OFF: Not display.
Selects whether or not to
show the remaining tape
indication on the normal
indications.
LL INDa)
ON (normal value):
Displays.
OFF: Not display.
Selects whether or not to
show the LOW LIGHT
indication on the normal
indications when inadequate
lighting is detected.
TC INDa)
Selects whether or not to
show the time data indication OFF: Not display.
on the normal indications.
ID INDa)
Selects whether or not to
display the camera ID when OFF: Not display.
displaying color bars.
ON (normal value):
Displays.
IRIS INDa)
Selects whether or not to
show the lens’s F-stop value OFF: Not display.
(iris indication) on the
normal indications. The F-
stop value is always
displayed when in EZ mode.
GAIN INDa)
Selects whether or not to
always show the gain
setting indication on the
normal indications.
ON (normal value):
Displays.
ON (normal value):
Displays.
ID SETa)
See “To set the camera ID”
on below.
Sets the camera ID (up to
eight characters, including
alphanumeric, symbols, and
spaces).
ON (normal value): Always
displays.
OFF: Displays for two
seconds only when the
setting has been changed.
a) When the viewfinder’s DISPLAY switch is set to OFF,
indications related to these items are not displayed even
when menu settings are set to ON.
FILTER INDa)
ON (normal value): Always
displays.
OFF: Displays for two
seconds only when the
setting has been changed.
Selects whether or not to
always show the FILTER
control setting indication on
the normal indications.
The FILTER control setting
indication is always
To set the camera ID
1 Press the MENU switch or turn the MENU dial to
move the cursor to ID SET.
displayed when in EZ mode.
WHITE INDa)
Selects whether or not to
show the setting of the white
balance switch.
The cursor (→) changes to the text entry arrow (↓).
ON (normal value): Displays.
OFF: Not display.
SKIN INDa)
Selects whether or not to
show the setting for skin
detail correction.
ON (normal value): Displays.
OFF: Not display.
Current camera ID
a) When the viewfinder’s DISPLAY switch is set to OFF,
indications related to these items are not displayed even
when menu settings are set to ON.
(Continued)
Chapter 4 Viewfinder Screen Indications and Menus
103
Viewfinder Advanced Menu
2 Press and turn the MENU dial to move the text
Item
Settings
entry arrow.
A.IRIS-AE
F5.6 , F8, F11, F16 (normal
Selects auto iris adjustment value)
which sets an F-stop value
that can be switched to AE
(displayed only when the EZ
MODE is set to CUSTOM).
Turn the MENU dial downward to move the cursor
to the right, or upward to move it to the left.
3 Press and turn the MENU dial to enter the desired
AGC LIMIT
0, 3, 6, 9, 12 dB (normal
characters.
Sets an upper limit value for value)
AGC adjustment (displayed
only when the EZ MODE is
set to CUSTOM).
The displayed character changes as you turn the
dial.
4 Return to step 2 and repeat the text entry
EZ mode settings
The following settings are set for the camcorder when
procedure.
EZ mode has been selected.
5 When you have finished entering the text, press
and turn the MENU dial to move the cursor to the
parenthesis position.
Item
Settings
STD
STD
0
CUSTOM
Selectable
Selectable
Selectable
Selectable
OFF
Setup file
Detail level
Master black
Black stretch
Skin detail
Shutter
This clears the displayed menu and returns to the
normal indications.
0
0
OFF
Advanced menu page 7
OFF (AE mode) OFF (AE mode)
Freeze mix
Gain
OFF
OFF
AGC mode
OFF
AGC mode
OFF
Hyper gain
Iris control method Automatic
Automatic
STD
Auto iris control
mode
STD
Iris override
0
Selectable
Not output
Selectable
Selectable
Selectable
ON
Color bar output
AGC upper limit
Not output
12dB
a) At shipping, the EZ MODE is set to STD.
AGC’s F-stop value F2.8
Item
Settings
AE’s F-stop value
ATW
F16
ON
EZ MODE
STD (normal value):
When the EZ MODE button Changes settings to
DynaLatitude
OFF
ON
OFF
has been set to EZ mode
standard settings.
ON, this selects whether or CUSTOM: Changes only
not to change the settings of some settings to standard
other switches and menus to settings.
the standard settings. (The For details of the settings
EZ mode function cannot be when STD or CUSTOM is
used during remote
operation.)
DCC+
F-stop value
indication
ON
ON
ON
Filter indication
Clock indication
ON
ON
specified, see “EZ mode
settings” below.
OFF
OFF
A.IRIS-AGC
• DSR-570WS/570WSP
OPEN, F2.8 (normal value),
F4, F5.6
Selects auto iris adjustment
which sets an F-stop value
that can be switched to AGC
(displayed only when the EZ
MODE is set to CUSTOM).
• DSR-370/370P
OPEN, F2, F2.8 (normal
value), F4, F5.6
104
Chapter 4 Viewfinder Screen Indications and Menus
Advanced menu page 8
Advanced menu page 9 (DSR-570WS/
570WSP only)
Item
Settings
Item
Settings
CLOCK IND
Selects whether or not to
display the date/time on the CAM: Displays.
normal indications.
OFF (normal value): Not
display.
16:9/4:3
16:9 (normal value)
4:3 a)
Selects whether to put
the camera in 16:9
mode or 4:3 mode.
BARS: Displays only when
color bars are displayed.
DATE MODE
Selects the date display
format.
YY MM DD (normal
value): Year/month/day
MM DD YY : Month/day/
year
DD MM YY : Day/month/
year
WIDE ID
ON (normal value): Adds.
Selects whether or not
to add a wide aspect ID
signal to video output
signals in 16:9 mode.
OFF: Does not add.
VF SCAN
AUTO (normal value):
TIME MODE
Automatically switch to 16:9 size
when the camera is in 16:9
mode, and automatically switch
to 4:3 size when the camera is in
4:3 mode.a)
12hours: 12-hour clock
24hours (normal value):
24-hour clock
Selects 16:9 or 4:3 as
the viewfinder scan size
when using the supplied
DXF-801/801CE
Viewfinder.
Selects whether to display a
12-hour clock (showing A.M.
and P.M. hours) or a 24-hour
clock.
FULL: Regardless of camera’s
mode (16:9b) or 4:3), the
viewfinder picture completely fills
the display area.
Note
Use the VCR menu to set the date and time (see page
119).
MENU MODE
Selects whether or not
switch the mode (16:9/
1 (normal value): Selects the
16:9 or 4:3 mode only with the
advanced menu.
4:3) on the basic menu. 2: Selects the 16:9 or 4:3 mode
with both the basic and advanced
menus.
a) Compared to 16:9 mode, the 4:3 mode video appears as
if a zoom lens has been adjusted slightly toward the
telephoto end (see figure on page 107).
b) When the camera is in 16:9 mode, the viewfinder picture
appears stretched vertically (see figure on page 107).
Chapter 4 Viewfinder Screen Indications and Menus
105
Viewfinder Advanced Menu
Advanced menu pages 9 to 12 (DSR-370/
370P) or pages 10 to 13 (DSR-570WS/
570WSP)
These pages are displayed only when the SETUP
switch has been to FILE.
For details of this operation, see “Setup Files” (page 108).
Advanced menu pages 13, 14 (DSR-370/
370P) or pages 14, 15 (DSR-570WS/
570WSP)
These pages are displayed only when the SETUP
switch has been to FILE.
For details of this operation, see “Using SetupNavi and
SetupLog” (page 113).
106
Chapter 4 Viewfinder Screen Indications and Menus
Video Output and Viewfinder Picture (DSR-570WS/570WSP only)
The video output and viewfinder picture of DSR-
570WS/570WSP vary as shown below according to
the settings of the 16:9/4:3 item and the VF SCAN
item of the advanced menu page 9.
Subject
Item
Settings
16:9
2
/
3-inch optics
16:9/4:3
VF SCAN
AUTO
The camera outputs 16:9 video.
The scan size of the viewfinder
picture is 16:9 size.
Viewfinder picture
Item
Settings
16:9/4:3
VF SCAN
16:9
4:3 effective area
FULL
The camera outputs 16:9 video.
The viewfinder picture is 16:9
video that has been stretched
vertically to completely fill the
display area.
16:9 effective area
Viewfinder picture
Item
Settings
4:3
16:9/4:3
VF SCAN
AUTO or FULL
The camera outputs 4:3 video that
has been electronically extracted
from the effective area of the 16:9
aspect ratio. Compared to 16:9
video, this video appears as if a
zoom lens has been adjusted
slightly toward the telephoto end.
The picture in the viewfinder is 4:3
video, which completely fills the
display area.
Viewfinder picture
Chapter 4 Viewfinder Screen Indications and Menus
107
Setup Files
You can use setup files to reproduce a particular
configuration of settings. You can also revise the
contents of setup files.
There are eight types of setup files, of which five are
factory preset setup files and the other three are user
files.
3 Move the cursor to SELECT FILE with the MENU
switch and use the MENU dial to select the desired
file.
Calling up a Setup File
This describes how to call up a setup file and use it to
replace the current menu settings.
File
Description
1 Set the SETUP switch to FILE.
STD
Settings for shooting under
standard conditions
HISAT
Settings for making pictures
vivid
FL
Settings for shooting under
fluorescent lighting
Settings for making pictures
like ones shot by film camera
FILMLIKE
SVHS/VHS
Settings to optimize camera
image for recording and
playback characteristics of S-
VHS, VHS, or Hi-8 tape
USER1 to USER3
User setup files (set to STD at
shipping)
SETUP switch
4 Move the cursor to CHG FILE and press the
The camcorder is set according to the currently-
selected file data.
MENU dial.
The display changes as shown below and the
selected file is called up.
2 Access basic menu page 3.
Current file a)
Selected file
a) An asterisk (*) appears in front of any factory preset
file whose contents have been revised at least once.
You can also call up these files via a similar operation
in advanced menu page 10 (page 9 on the DSR-370/
370P). In this page, a file recorded onto a tape can
also be called up.
For details, see “To call up files recorded onto a tape ”
(page 109).
108
Chapter 4 Viewfinder Screen Indications and Menus
5 Press the MENU dial to call up the file. To abort
the call up operation, move the MENU dial (the
display returns to the one shown in step 3).
To call up files recorded onto a tape
Load the cassette that contains the recorded files.
1 Set the SETUP switch to FILE.
During the call up operation, the following display
appears.
2 Access advanced menu page 10 (page 9 on the
DSR-370/370P).
(The following figure shows an example for the
DSR-570WS/570WSP.)
a) The model name DSR-570WS/570WSP or DSR-370/
370P is displayed when a tape saved by one of those
models is read. Nothing is displayed when a tape
saved by previous models (DSR-500WS/500WSP,
etc.) is read.
3 Move the cursor to SELECT FILE with the MENU
switch and move the MENU dial to select TAPE.
When the call up operation ends, the display
changes as shown below.
Name of file
recorded onto
tape
4 Move the cursor to CHG FILE and press the
MENU dial.
The settings of the camcorder are now replaced by
the settings in the called file.
The screen appears as shown below.
Note
Files saved to tape by the DSR-370/370P cannot
be recalled by other models.
Chapter 4 Viewfinder Screen Indications and Menus
109
Setup Files
Page 12 (page 11 on DSR-370/370P)
Changing File Settings
Item
Settings
When using advanced menu page 11 or 12 (page 10 or
11 on the DSR-370/370P), you can change the settings
about picture quality in setup files. (In basic menu
page 1, a part of items are changeable.)
The changes are accepted only until another file is
called up, after which the original settings are restored.
If you save the changes, store the modified file as one
of the user files or record it in a cassette. (See the
following section “Saving File Settings”.)
–99 to 0 (normal value) to
+99
Negative adjustment values
decrease the saturation and
positive adjustment values
increase the saturation.
SAT
Adjusts the saturation of the
image.
HUE
–99 to 0 (normal value) to
+99
Adjusts the hue of the
image.
–99 to 0 (normal value) to
+99
Negative adjustment values
decrease the saturation and
positive adjustment values
increase the saturation.
SKIN SAT
Adjusts the saturation in the
specified area of the image.
1 Perform the steps described in “To call up files
recorded onto a tape” on page 109 to call up the
selected file.
SKIN HUE
Adjusts the hue in the
specified area of the image.
–99 to 0 (normal value) to
+99
2 Access advanced menu page 11 or 12 (page 10 or
11 on the DSR-370/370P).
(The following figure shows an example for the
DSR-570WS/570WSP.)
Saving File Settings
Files whose settings have been changed for certain
shooting conditions can be saved as a user file or onto
a tape.
Currently
selected filea)
For details, see “To save setup files to a tape” (page 111).
1 Set the SETUP switch to FILE.
Currently
selected filea)
a) An asterisk (*) appears in front of any factory preset
file whose contents have been revised at least once.
3 Make the desired changes.
SETUP switch
Page 11 (page 10 on DSR-370/370P)
2 Call up a setup file whose settings approximate the
desired shooting conditions and then change some
of the settings.
Item
Settings
M.BLACK, STRETCH and
DTL LEV
See “Basic menu page 1”
(page 92).
M.GAMMA
–99 to 0 (normal value) to
For details of this operation, see “Calling up a Setup
File” (page 108), “Changing File Settings” above,
“Viewfinder Basic Menu” (pages 92 to 97), and
“Viewfinder Advanced Menu” (pages 98 to 106).
Adjusts the gamma curve.
+99
–99 to 0 (normal value) to
+99
V DTL LEV
Adjusts the vertical detail.
DTL FREQ
Adjusts the central frequency
of the detail.
LL, L, M (normal value), H,
HH
110
Chapter 4 Viewfinder Screen Indications and Menus
3 Access advanced menu page 13 (page 12 on DSR-
370/370P).
(The following figure shows an example for the
DSR-570WS/570WSP.)
Currently
selected filea)
To save setup files to a tape
Load the tape onto which the file will be recorded.
a) An asterisk (*) appears in front of any factory preset
file whose contents have been revised at least once.
1 Perform steps 1 to 4 of “Saving File Settings” and
select TAPE as the file saving destination.
4 Move the cursor to DESTINATION FILE with the
MENU switch and turn the MENU dial to select
USER1, USER2, or USER3.
File in which
current
settings are
to be stored
2 Move the cursor to STORE FILE? with the MENU
switch and press the MENU dial.
5 Move the cursor to STORE FILE? with the MENU
switch and press the MENU dial.
The display changes as shown below.
(The following figure shows an example for the
DSR-570WS/570WSP.)
The display changes as shown below.
6 Press the MENU dial to store the file. To abort the
save operation, move the MENU dial (the display
returns to the one shown at step 4).
(Continued)
When the save operation is finished, the display
changes as shown below.
Chapter 4 Viewfinder Screen Indications and Menus
111
Setup Files
3 Press the MENU dial to store the file. To abort the
save operation, move the MENU dial (the screen
returns to the screen shown in step 2).
The tape automatically rewinds and recording
starts.
The display changes as shown below. (“CAN
NOT WRITE” appears on the screen if no tape is
loaded or if the loaded tape is write-protected.)
a) During recording, the model name DSR-370/370P or
DSR-570WS/570WSP is displayed.
After the settings are stored, the following display
appears.
112
Chapter 4 Viewfinder Screen Indications and Menus
Using SetupNavi and SetupLog
The SetupNavi function records a setting of the setup
menu and setup files onto a tape, so that the same
settings can be called up and used again or copied to
another camera.
The SetupLog function records a camera setting every
few seconds at shooting and displays the recorded data
in the viewfinder during playback.
”NO TAPE” is displayed if you neglected to load a
cassette.
3 Move the cursor to RECALL DATA with the
MENU switch to call up the data recorded on the
tape. (Press the MENU switch to cancel.)
The tape is rewound and playback starts. The
display changes as follows and the call up
operation begins.
Note
The setup navigation function cannot be used with the
RCP-TX7, RM-M7G, or CCU-M5A/M5AP connected.
To use this function, disconnect the RCP-TX7, RM-
M7G, or CCU-M5A/M5AP, power the camera off, and
then power it on again.
Setting Up the Camera Using
Data Recorded on Tape
Name of data
being called up
The procedure to replace camera’s menu settings with
settings recorded onto video tape is described here.
a) The model name DSR-570WS/570WSP or DSR-370/
370P is displayed when a tape saved by one of those
models is read. Nothing is displayed when a tape
saved by previous models (DSR-500WS/500WSP,
etc.) is read.
1 Insert the cassette onto which the data was
recorded. Set the SETUP switch to FILE, then set
the POWER switch to ON while holding down the
MENU dial.
To abort the call up operation while in progress
Press the MENU dial.
Advanced menu page 1 appears.
(The following figure shows an example for the
DSR-570WS/570WSP.)
After the data has been read, the following display
appears.
(Continued)
2 Turn the MENU dial until advanced menu page 14
(page 13 on DSR-370/370P) appears.
For details of menu operation, see “Advanced Menu
Operations” (page 98).
Chapter 4 Viewfinder Screen Indications and Menus
113
Using SetupNavi and SetupLog
4 Press the MENU dial.
“NO TAPE” appears if you neglected to load a
cassette.
To cancel the setup of data that has been read,
rotate the MENU dial.
6 Press the MENU dial.
The previous menu settings are overwritten by the
data recorded on the tape.
The following display appears.
5 Change the menu settings if necessary.
7 Set the cursor to “NAME SET” and press the
MENU dial. (Press the MENU switch to cancel.)
The cursor (c) changes to the text entry cursor (x).
Recording the Menu Settings
Onto a Tape
1 Load the tape onto which the settings are to be
recorded. Turn the camcorder power on.
2 Make your basic menu settings.
For details of this operation, see “Basic Menu
Operations” (page 92).
8 Enter a name for the data.
3 Again, set the POWER switch to ON while
Moving the text entry cursor: Press the MENU
switch down to move the cursor to the right,
and press the MENU switch up to move the
cursor to the left.
holding down the MENU dial.
4 Make your advanced menu settings.
For details of this operation, see “Advanced Menu
Operations” (page 98).
Selecting the character: Turn the MENU dial
until the desired character appears.
5 Access advanced menu page 15 (page 14 on DSR-
370/370P) and move the cursor to STORE DATA.
(The following figure shows an example for the
DSR-570WS/570WSP.)
9 After completing text entry, move the cursor to the
parenthesis position.
The display changes as follows.
114
Chapter 4 Viewfinder Screen Indications and Menus
10Move the cursor to “SURE TO STORE?” and
press the MENU dial (press the MENU switch to
cancel).
1 Turn the power on and load the tape that contains
the recording to be viewed.
2 Play back the tape.
The tape is rewound and the recording starts. The
display changes as follows and the data recording
begins.
For details of playback operation, see page 70.
3 Press the MENU switch upward (to STATUS
position).
The display changes to page 1 of the status display.
Name of data
being recorded
Settings during
recording
a) During recording, the model name DSR-370/370P or
DSR-570WS/570WSP is displayed.
To abort the data recording while in progress
Press the MENU dial.
Each time you press upward the MENU switch, the
status display cycles through the status pages and
playback display in the order: page 2, page 3, the
playback display (containing the current settings),
and page 1.
After the data has been recorded, the following
display appears.
Status display (page 2)
Notes
• It takes about three and a half minutes to record the
data.
• The former setupnavi data or the recorded contents of
the tape are overwritten.
Status display (page 3)
Viewing SetupLog Data
The SetupLog function records camcorder settings
every few seconds at shooting and displays the
recorded data in the viewfinder during playback.
Note
Setup log data is not displayed when playing back a
tape containing externally recorded analog signals.
To view the SetupLog Data, perform the following
procedure.
Chapter 4 Viewfinder Screen Indications and Menus
115
Using SetupNavi and SetupLog
Notes
• SetupLog data is not recorded while SetupNavi data
or a setup file is being recorded onto the portion of a
tape. (If you play back that portion of a tape
containing SetupNavi data or a setup file, the data
displayed in the setup display is not the SetupLog
data of the playback picture.)
• In the following cases, changed settings that were not
recorded may appear as blank settings.
– SetupLog data is overwritten at intervals of a few
seconds during recording. If the settings are
changed frequently for certain items, it may not
always be recorded in time.
– If the recording time is very short, recording may
be ended before all of the data has been
overwritten.
116
Chapter 4 Viewfinder Screen Indications and Menus
Chapter
5
Adjustments and
Settings
Setting on the VCR Section — VCR Menu
You can use the VCR menu for settings on the VCR
section.
Operation
Menu No.
101
Reference
Page 119
Page 119
Real time clock and calendar settings
Cumulative hour counts:
• Head drum operating hours
• Tape transport hours
201
• Operating (power-on) hours
Frame mode selection for time code (DSR-370/570WS only)
Battery capacity indication selection
Standby-on period setting
204
206
207
210
211
212
213
214
220
221
Page 119
Page 120
Page 120
Page 121
Page 123
Page 123
Page 124
Page 124
Page 125
Page 125
Use auto-check function
Selection of ClipLink function
Audio recording mode selection
Audio reference level selection
Fade-in/fade-out setting for the audio recording start and stop points
Use setup add (DSR-370/570WS only)
Use setup remove (DSR-370/570WS only)
Chapter 5 Adjustments and Settings
117
VCR Menu Operation
Basic Operation
Display window
LIGHT
ON
WARNING
RESET
OVER dB OVER
PB DATE NDF EXT-LK
HOLD
0
OFF
-12
-20
H
MIN
SEC
FRM
CL CONT IP
DVCAM
CLIP
TAPE
BATT
DIAG
DISPLAY
-30
-40
COUNTER
TC
U-BIT
E
F
Li
-
5
F
32k
48k
1
2
RF SERVO HUMID SLACK
F8
8
(MENU SET)
2,4
3,4
1,6
MENU
ADVANCE
SHIFT
REC TIME SKIN DTL
EXT VTR
OUTPUT
TTL
DUR
OFF
ON
OFF
COMPONENT.
VBS
Y/C
AUDIO LEVEL
TTL RESET
SET
PRESET
F-RUN
SET
MONITOR SELECT
VTR
TRIGGER
AUTO
MAN
CH-1
MIX
CH-2
EXT
REGEN
PARALLEL
INT ONLY
EXT ONLY
AUDIO SELECT
LITHIUM BATT
DATE/TIME
R-RUN
CH-1
CH-2
ClipLink
CONTINUE
HYPER
GAIN
SETUP
FRONT MIC
LOW CUT
MONITOR OUT
CHARACTER
AUDIO IN
FRONT
REAR
ON
OFF
FILE
STD
ON
OFF
VJ MIC
WIRELESS
ON
OFF
1 Press the MENU button.
4 Change the settings.
“DIAG” appears in the display window and the
time data display in the display window switches
to the menu display.
Step
Operation
Select digit to be changed Press the SHIFT button.
Change the value
Press the ADVANCE
button.
5 Press the RESET/(MENU SET) button.
Menu No. (blinking)
Year (factory-set to 2001)
This records the new setting and returns to a
blinking display of the menu number.
6 Press the MENU button.
2 Press the ADVANCE button repeatedly until the
desired menu appears.
This returns the display window to the display
shown before the VCR menu.
3 Press the SHIFT button.
This shows the current settings for the menu
selected by step 2.
The setting can be changed for the digit that is
blinking.
To exit from changing settings
Press the MENU button to close the menu.
118
Chapter 5 Adjustments and Settings
On the DSR-370/570WS: Displayed in
mmddyyyy format (Example: 05012002)
On the DSR-370P/570WSP: Displayed in
ddmmyyyy format (Example: 01052002)
Menu 101 Setting the Real Time
Clock and Calendar
1 Display menu 101 and press the SHIFT button.
The current calendar setting appears in the setting
mode format (yyyymmdd).
Example: May 1, 2002
Menu 201 Checking the Total
Operating (Power-On) Hours
1 Display menu 201 and press the SHIFT button.
Blinking
Pressing the SHIFT button cycles through the
following display items.
Note
Indication
Example
A 0492Hr
b 0480Hr
C 0853Hr
201 0492
The first two digits of the year setting cannot be
changed.
Head drum operating hours
Tape transport hours
Total operating hours
Menu number
2 Use the SHIFT and ADVANCE buttons to set the
desired date.
2 Check the indication, then press the RESET/
(MENU SET) button, followed by the MENU
button.
If there are no more new settings to be made, go
directly to step 5.
This returns the display window to the display
shown before the VCR menu.
3 Press the SHIFT button while the date display is
blinking (Example: 20020501).
The current time (real time clock) setting is
displayed.
Example: 10:15:05 PM
Menu 204 Selecting Frame Mode
(DF/NDF) for Time Code (for
DSR-370/570WS only)
Blinking
Select frame modes when setting the time code.
Drop-frame mode (factory setting): When adjusting
the discrepancy between time code value and real
time
Non-drop-frame mode: When you need not adjust
the discrepancy between time code value and real
time
4 Use the SHIFT and ADVANCE buttons to set the
current time.
5 Press the RESET/(MENU SET) button.
This starts the clock advance operation.
6 Press the MENU button.
For details of time code settings, see page 73.
This returns the display window to the display
shown before the VCR menu.
The date set can be displayed in the time value
indication (see page 71) in the following way.
Chapter 5 Adjustments and Settings
119
VCR Menu Operation
1 Display menu 204.
If the setting does not need to be changed, press
the MENU button to close the menu.
The menu number and the current frame mode
setting are shown.
2 Press the SHIFT button until the desired battery
name is displayed, then press the ADVANCE
button.
Example: dF (drop-frame mode)
Pressing the ADVANCE button cycles through the
following indications.
nIcd y LI y nI-H y Antn y Auto
Blinking
Frame mode indication
Indication
Meaning
Automatic detection of battery
type.
Auto
(factory setting)
nIcd
LI
Indication for NP-1B/BP-90A
battery is selected.
If the setting does not need to be changed, press
the MENU button to close the menu.
Indication for BP-L40/L40A/L60/
L60A/L90/L90A battery is
selected.
Indication for BP-M50/M100
battery is selected.
2 Press the SHIFT button to make the frame mode
start blinking, then press the ADVANCE button.
nI-H
Antn
This switches the frame mode display as shown
below.
Indication for Anton Bauer
Magnum battery is selecteda).
Example: ndF (non-drop-frame mode)
a) To use the Anton Bauer Magnum Battery System, a
special battery mount developed by Anton Bauer
Corporation is required.
For details, contact an Anton Bauer dealer or your
Sony dealer.
Blinking
3 Press the RESET/(MENU SET) button and then
3 Press the RESET/(MENU SET) button and then
the MENU button.
the MENU button.
The settings are recorded and the display window
returns to the display shown before the VCR menu.
The settings are recorded and the display window
returns to the display shown before the VCR menu.
Menu 207 Setting Standby-On
Period
Menu 206 Selecting Battery
Capacity Indication
At recording pause state, the camcorder waits for a
certain standby-on period and then automatically
switches to standby-off mode. This standby-on period
can be set in advance.
This selects the indication type of battery capacity.
1 Display menu 206.
The selected menu number is displayed, along with
the name of the currently selected battery.
Example: nIcd (Indication for the NP-1B/BP-
90A)
1 Display menu 207.
The selected menu number is displayed, along with
the current standby-on period setting (in minutes).
Blinking
Selected battery capacity
indication
120
Chapter 5 Adjustments and Settings
Example: 8 minutes
To perform the auto-check
1 Display menu 210.
Blinking
Standby-on period
Blinking
Auto-check function
indication
If the setting does not need to be changed, press
the MENU button to close the menu.
2 Press the SHIFT button to make the auto-check
function indication (oFF) start blinking, then press
the ADVANCE button to change the indication to
“on”.
2 Press the SHIFT button until the standby-on period
starts blinking, then press the ADVANCE button.
Each press of the ADVANCE button changes the
setting as follows.
08 (factory setting) y 01 y 03 y 05
To cancel the auto-check function, press the
MENU button to close the menu.
3 Press the RESET/(MENU SET) button.
3 Press the RESET/(MENU SET) button and then
the MENU button.
This changes the display and opens the cassette
holder. If there is a cassette in the holder, it is
ejected (except during recording).
The settings are recorded and the display window
returns to the display shown before the VCR menu.
Blinking
Menu 210 Using Auto-Check
Function
4 Insert the cassette and close the cassette holder.
On the DSR-370/370P/570WS/570WSP, the internal
check can be automatically performed using the auto-
check function. Meanwhile, a test recording and
playback are also performed for about 1 minute.
Before shooting, it is desirable to perform auto-check
and make sure for problems in VCR’s internal
operations through the result of the internal check
displayed in the display window and the video and
audio recording qualities.
The display changes to the following, and the tape
is loaded.
Blinking
5 Use the tape transport buttons to change the tape
position for test recording if necessary, or advance
to step 6.
Preparations for testing
(Continued)
Make preparations as shown in the table below.
Preparation
Refer to
Connect a monitor to the MONITOR OUT or S Page 28
VIDEO OUT connector
Connect an earphone or headphones to the
EARPHONE connector
Page 18
Prepare a cassette for test recording/playback Page 59
Chapter 5 Adjustments and Settings
121
VCR Menu Operation
6 Press the VTR button on the camcorder or lens.
Confirming the result
Test recording starts.
The result of the internal check is displayed in code as
shown in the table below. When a problem is
indicated, follow the instructions to check the
camcorder and cassette. If no errors can be found,
contact your Sony dealer. Also, be sure to check the
quality of the playback video and audio (see step 7).
The display changes as shown below during
recording. (The hyphen following “At” moves to
right.)
Display
Diagnostic result
At good
VCR’s internal operations are normal. If the
video and audio recording qualities are
normal, the unit is ready for use.
After about 1 minute, the tape is rewound to the
recording start position and playback starts. The
following is displayed during playback.
At ng-01
At ng-02
There may be a problem in the VCR or the
cassette. Contact your Sony dealer.
There may be a problem in VCR’s internal
operations or data loading from the tape.
Clean the video heads using the DVM-
12CLD Cleaning Cassette (see page 141)
and repeat the auto-check. If the result is the
same, contact your Sony dealer.
7 Check the recording quality of the playback video
on the viewfinder or monitor screen. Check the
recording quality of the playback audio from the
earphone or headphones.
At ng-03
At ng-04
There may be a problem in the link between
the camera and VCR sections. If not, correct
the error and repeat the auto-check. If the
result is the same, contact your Sony dealer.
Check whether the REC/SAVE switch is set
to SAVE. If so, repeat the auto-check with
setting the switch to REC or using another
cassette whose REC/SAVE switch is set to
REC. If the result is the same, contact your
Sony dealer.
If the recording quality is poor
There may be some kind of problem whether or
not it is detected by the internal check. Refer to the
section “Troubleshooting”(page 144) and repeat
the test. If the recording quality remains poor,
contact your Sony dealer.
At ng-05
o-HAUL
At Abort
Check whether a cassette is inserted. If not,
insert a cassette and repeat the auto-check.
If the result is the same, contact your Sony
dealer.
If the video and audio recording qualities are
normal, the unit is ready for use. However,
the unit requires service. It is desirable to
consult your Sony dealer.
When playback ends, the internal check result is
displayed and the camcorder enters recording
pause mode.
The test recording or playback and internal
check have aborted (when a tape transport
button was pressed during recording or
playback or when the tape ended). To
resume the auto-check, press the MENU
button to close the menu and perform the
procedure described in the previous section
“To perform the auto-check”.
8 After confirming the result (see the next section
“Confirming the result”), press the MENU button.
The display window returns to the display shown
before the VCR menu.
122
Chapter 5 Adjustments and Settings
Menu 211 Selecting ClipLink
Function
Menu 212 Selecting Audio
Recording Mode
This setting must be made when not using the
ClipLink function.
The audio recording mode can be set to either of the
following modes.
48-kHz mode (factory setting): Enables two-
channel recording mode with 48-kHz sampling
frequency.
For details of the ClipLink function, see “ClipLink
Shooting” (page 77).
32-kHz mode: Enables four-channel recording mode
with 32-kHz sampling frequency (for CH-1 and
CH-2).
1 Display menu 211.
The ClipLink function is factory-set to on.
1 Display menu 212.
The menu number and current audio recording
mode is displayed.
Example: 48 (2-channel mode with 48-kHz
sampling frequency)
Blinking
ClipLink function on/oFF
indication
If the setting does not need to be changed, press
the MENU button to close the menu.
Blinking
Audio recording mode
indication
2 Press the SHIFT button to make the ClipLink
function on/oFF indication start blinking. Press the
ADVANCE button to change the indication to
oFF.
If the setting does not need to be changed, press
the MENU button to close the menu.
3 Press the RESET/(MENU SET) button and then
the MENU button.
2 Press the SHIFT button to make the audio
recording mode indication start blinking, then
press the ADVANCE button.
The settings are recorded and display window
returns to the display Ûêown before the VCR menu.
This switches the mode setting to the other audio
recording mode.
Example: 32 (4-channel mode with 32-kHz
sampling frequency)
Blinking
3 Press the RESET/(MENU SET) button and then
the MENU button.
The settings are recorded and display window
returns to the display shown before the VCR menu.
Chapter 5 Adjustments and Settings
123
VCR Menu Operation
Changing the audio reference level setting from
–20 dB (or –18 dB) to –12 dB increases the audio
recording level by 8 dB (or 6 dB) whether the
AUDIO SELECT (CH-1/CH-2) switch is set to
AUTO or MAN.
Menu 213 Selecting Audio
Reference Level
The audio reference level can be set to either of the
following.
–20 dB (factory setting for DSR-370/570WS) or
–18 dB (factory setting for DSR-370P/
570WSP): Audio reference level for professional
use
–12 dB: Audio reference level commonly used for
consumer DV (The maximum level is 0 dB.)
Menu 214 Setting Fade-In/Fade-
Out for the Audio Recording
Start and Stop Points
You can reduce noise at back space editing points (if
necessary) by setting the fade-in/fade-out to on. The
fade-in/fade-out transition time is within one frame
(1/30 seconds for DSR-370/570WS or 1/25 seconds for
DSR-370P/570WSP).
1 Display menu 213.
The menu number and current audio reference
level is displayed.
Example: –20 dB (for DSR-370/570WS)
1 Display Menu 214.
a)
The fade-in/fade-out is factory-set to oFF.
Blinking
Audio reference
level indication
a) For DSR-370P/570WSP: –18
Blinking
Fade-in/fade-out
setting indication
If the setting does not need to be changed, press
the MENU button to close the menu.
2 Press the SHIFT button to make the audio
reference level display start blinking, then press
the ADVANCE button.
If the setting does not need to be changed, press
the MENU button to close the menu.
2 Press the SHIFT button to make the fade-in/fade-
out setting indication start blinking, then press the
ADVANCE button to change the setting to on.
This switches the setting to the other audio
reference level.
Example: –12 dB
3 Press the RESET/(MENU SET) button and then
the MENU button.
Blinking
The settings are recorded and the display window
returns to the display shown before the VCR menu.
3 Press the RESET/(MENU SET) button and then
the MENU button.
The settings are recorded and display window
returns to the display shown before the VCR menu.
When using the camcorder in a editing system
containing both consumer DV and professional
equipment, setting the audio reference level to
–12 dB is recommended.
124
Chapter 5 Adjustments and Settings
Menu 220 Using Setup Add (for
DSR-370/570WS only)
Menu 221 Using Setup Remove
(for DSR-370/570WS only)
Use this menu to add setup to the playback video
signals.
Use this menu to remove setup from a video signal
which contains setup (when the DSBK-501/501P is
fitted).
1 Display menu 220.
1 Display menu 221.
The setup add is factory-set to oFF.
Setup remove is factory-set to on.
Blinking
Blinking
Setup add on/oFF indication
Setup remove on/oFF indication
If the setting does not need to be changed, press
the MENU button to close the menu.
If the setting does not need to be changed, press
the MENU button to close the menu.
2 Press the SHIFT button to make the setup add on/
oFF indication start blinking, then press the
2 Press the SHIFT button to make the setup remove
on/oFF indication start blinking, then press the
ADVANCE button to change the setting to on.
ADVANCE button to change the setting to on.
3 Press the RESET/(MENU SET) button and then
the MENU button.
3 Press the RESET/(MENU SET) button and then
the MENU button.
The settings are recorded and display window
returns to the display shown before the VCR menu.
The settings are recorded and display window
returns to the display shown before the VCR menu.
Note
Note
During recording the signal of the image being shot
contains setup add, when it is output from the
camcorder’s S VIDEO OUT and MONITOR OUT
connectors.
During playback, the setup is removed from the output
video signal.
Even if you set setup remove to on, the video signals
output from the camcorder’s MONITOR OUT
connector during recording will contain setup.
However, signals with setup removed are recorded
onto tape.
To have the setup added during playback, set the setup
add to on.
Chapter 5 Adjustments and Settings
125
White Balance Adjustment
1 Make the following settings.
• POWER switch: ON
Adjusting the white balance ensures that as lighting
conditions change white objects remain white in the
image and tones remain natural.
The color of light emitted varies from one light source
to another, and as the lighting changes the apparent
color of an illuminated subject changes. It is therefore,
necessary to adjust the white balance each time the
principal lighting source changes.
• OUTPUT/DL/DCC+ switch: one of the CAM
positions
• Lens iris selector: A (automatic)
• ATW button: off
2 Set the FILTER control according to the lighting
conditions. (See page 57.)
3 Set the W. BAL switch to A or B.
Saving an Appropriate White
Balance Value in Memory
4 Arrange a white subject (paper, cloth, etc.) under
the same lighting conditions as for shooting, and
zoom in on it so that as far as possible the whole
screen is white.
You can save two white balance values in separate
memories, A and B. Unless changed, the saved values
are retained for approximately ten years, even when
the camcorder is turned off.
The minimum white area requirements for the
adjustment are shown in the following figure.
Once a value is saved, you can automatically restore
the adjustment by moving the W. BAL switch to the A
or B position. This makes shooting under alternating
lighting conditions easy.
Area of white within this
rectangle should be
equivalent to at least 10% of
the image area.
Center of the screen
Separate white balance values for each
FILTER control setting
In the default case, as described above, the same two A
and B white balance values apply to all four settings of
the FILTER control. It is possible, however, to change
the AWB MEM setting in advanced menu page 3 (see
page 101) so that there are eight possibly different
values for the A and B positions.
approximately
approximately
70% of the
height of the
image
70% of the
width of the
image
5 Push the WHT/BLK switch in the WHT direction
and release.
The white balance adjustment is carried out.
During the adjustment the legend “AUTO WHITE
-OP-” appears in the viewfinder.
2
4
1
1
After a few seconds the adjustment is complete,
and the legend in the viewfinder changes to
“AUTO WHITE -OK-” plus a color temperature,
as shown in the following figure.
5 1 3
The adjustment value is automatically saved in
memory A or B as selected above.
126
Chapter 5 Adjustments and Settings
To save the white balance adjustment for different
lighting conditions, repeat steps 2 to 4 above. You can
save two different values for the white balance, in
memories A and B.
Message
Meaning and corrections to be made
The color temperature is too high. Try
the following, in this order of
precedence.
(1) If the FILTER control is in position 1,
change it to position 2, 3 or 4, then
retry the adjustment.
(2) Check that the subject is completely
white, then retry the adjustment.
(3) The color temperature may be
outside the range of the camcorder.
Fit an appropriate color temperature
conversion filter, then retry the
adjustment.
AUTO WHITE
-NG-
:C.TEMP.HI
CHG.FILTER
TRY AGAIN
Note
The color temperature display is an approximate guide.
There is a margin of error in the displayed color
temperature when the white balance is adjusted on
another DSR-370/370P/570WS/570WSP, camera, or
camcorder, even under the same conditions.
The margin of error is higher for higher temperatures.
WHITE:PRESET The W. BAL switch is in the PRESET
To recall a white balance value from memory
Before beginning shooting, set the W. BAL switch to
the A or B position. This automatically sets the
camcorder to the white balance adjustment saved in
the corresponding memory.
position.
Move the W. BAL switch to the A or B
position.
BARS
The camcorder is outputting a color bar
signal.
Move the OUTPUT/DL/DCC+ switch to
one of the CAM positions.
If white balance adjustment cannot be
completed automatically
The warning message “AUTO WHITE -NG-” appears
in the viewfinder.
Make the necessary corrections, then carry out the
process again.
Using the Preset White Balance
Settings
The camcorder provides preset white balance settings,
for instant shooting with approximately the correct
adjustment.
There are also particular shooting conditions under
which the preset values may give better results than the
human eye adjustment.
Warning messages for white balance adjustment
Message
Meaning and corrections to be made
AUTO WHITE Light level is too low.
-NG-
:LOW LIGHT
TRY AGAIN
• Increase the illumination level, open
the iris, or use the GAIN switch to
increase the video signal level.
• Check the setting of the FILTER
control.
1 Set the W. BAL switch to PRESET.
• After these checks, retry the
adjustment.
2 Set the FILTER control.
AUTO WHITE
-NG-
The subject is not white or the white
area is too small, or the lighting level is
too high.
The white balance is automatically adjusted for
3200 K when the FILTER control is in position 1
and for 5600 K in position 2, 3 or 4.
:
??
• Use a white subject.
TRY AGAIN
• Lower the illumination level, stop down
the iris, or use the GAIN switch to
decrease the video signal level.
• Check the setting of the FILTER
control.
You can change those values (3200 K and 5600 K)
to other values in basic menu page 2 (See page 93).
•
After these checks, retry the adjustment.
AUTO WHITE The color temperature is too low. Try
-NG-
the following, in this order of
precedence.
(1) If the FILTER control is in position 2,
3 or 4, change it to position 1, then
retry the adjustment.
:C.TEMP.LOW
CHG.FILTER
TRY AGAIN
(2) Check that the subject is completely
white, then retry the adjustment.
(3) The color temperature may be
outside the range of the camcorder.
Fit an appropriate color temperature
conversion filter, then retry the
adjustment.
Chapter 5 Adjustments and Settings
127
White Balance Adjustment
Using the ATW (Auto Tracing
White Balance) Function
Light Sources and Color
Temperature
The ATW function continuously adjusts the white
balance automatically to adapt to changes in lighting
conditions.
Adjustment of the white balance to match the light
source is essential to ensure correct color rendering.
The color of a light source is indicated as a color
temperature in kelvins (K). It is higher for bluish light,
and lower for reddish light. When the camcorder is
shipped it is adjusted for use with video lights (studio
lamps with a color temperature of 3200 K). For use
with other light sources, therefore, adjustment is
required.
Note
Depending on the shooting conditions, automatic
adjustment may not necessarily give optimum results.
For the best possible results, use the W. BAL switch.
To use the ATW function
First use the FILTER control to set the approximate
color temperature, then carry out white balance
adjustment.
The following table shows typical color temperature
values for different light sources.
Press the ATW button turning the indicator on.
This activates the ATW function, and the ATW
indication appears in the viewfinder.
To disable the ATW function, press the ATW button
again, turning the indicator off.
Color temperatures of different light sources
If the ATW function does not operate correctly
A warning message appears in the viewfinder as
shown in the table below.
Color temperature (K)
Light source
Natural
Artificial
Clear sky
Light cloud
M
10,000
8,000
7,000
6,000
5,000
Message
Meaning and correction to be made
:C.TEMP.LOW If the FILTER control is in position 2, 3 or
4, change it to position 1, then retry the
ATW operation.
Cloudy or rainy
skies
Blue light
M
:C.TEMP.HIGH If the FILTER control is in position 1,
change it to position 2, 3 or 4, then retry
the ATW operation.
Fluorescent light
(daylight white)
Direct sunlight, Mercury lighting
m
White light
M
noon
Fluorescent light
(white)
One hour after
sunrise or
before sunset
Fluorescent light
(warm white)
4,000
3,500
3,200
3,000
2,500
Studio lighting
m
Yellow light
M
Halogen lamps
and video lights
Thirty minutes
Incandescent
after sunrise or lighting
before sunset
Sodium street-
lighting
m
Sunrise or
sunset
Candlelight
Red light
2,000
128
Chapter 5 Adjustments and Settings
Black Balance Adjustment
If black balance adjustment cannot be
completed automatically
The warning message “AUTO BLACK -NG-” appears
in the viewfinder.
Make the necessary corrections, then carry out the
process again.
Correct adjustment of the black balance is important
for optimum operation of a camcorder. It is necessary
when using the camcorder for the first time or after a
significant period out of use, and also when there has
been a sudden change in temperature.
The adjustment value is saved in memory, and
readjustment is not normally necessary after powering
the camcorder off or simply when lighting conditions
change.
Warning messages for black balance adjustment
Message
AUTO BLACK The lens iris did not close fully.
Meaning and corrections to be made
Check whether the lens cable is
connected properly, and whether there is
a fault in the lens. If a second attempt to
carry out the adjustment fails, consult
your Sony dealer.
-NG-
: IRIS
NOT CLOSED
TRY AGAIN
AUTO BLACK The iris opened during adjustment or
there is a hardware error.
Close the iris and try again. If this fails,
consult your Sony dealer.
-NG-
??
TRY AGAIN
:
BARS
The camcorder is outputting a color bar
signal.
Move the OUTPUT/DL/DCC+ switch to
one of the CAM positions.
2
1
1 Turn on the power and check that the OUTPUT/
DL/DCC+ switch is in one of the CAM positions.
2 Push the WHT/BLK switch in the BLK direction
and release.
The lens iris closes, and black balance adjustment
is carried out.
During the adjustment the legend “AUTO BLACK
-OP-” appears in the viewfinder.
After a few seconds the adjustment is complete,
and the legend in the viewfinder changes to
“AUTO BLACK -OK-”.
Chapter 5 Adjustments and Settings
129
Shutter Settings
This section covers the settings for electronic shutter
speed, CLS (clear scan ) and EVS function.
The new value for the shutter speed or clear scan
frequency and EVS setting remains set until changed,
even when the camcorder is powered off.
Shutter speeds
There are five shutter speeds, from 1/100 s (DSR-370/
570WS) or 1/60 s (DSR-370P/570WSP) to 1/2000 s.
Increasing the shutter speed reduces blurring when
shooting a fast-moving subject. It is also possible to
reduce flicker when shooting under fluorescent
lighting by changing the shutter speed.
1 3 2
CLS (Clear Scan) function
When shooting a computer screen or projected image,
horizontal bands may appear in the camcorder image.
This is because the vertical scan frequency of the
computer-generated image is different from the
vertical scan frequency of the video system. The clear
scan function allows you to select a vertical scan
frequency to reduce this interference.
1 Set the SHUTTER switch to the ON position.
The SHUTTER indicator in the viewfinder comes
on, and it is now possible to change the shutter
speed or clear scan frequency setting and to set the
EVS function. (If the EVS is already selected, the
SHUTTER indicator will not light.)
EVS (Enhanced Vertical Scan)
2 Operate the MENU switch and MENU dial to align
the cursor with the item “SHUTTER” in basic
menu page 1.
This function enhances the vertical scan resolution
from 400 to 450 lines (or 450 to 530 lines) to reduce
flicker. However, this increases the aliasing.
Setting the shutter speed, CLS and EVS
function
Notes on setting the shutter speed
• The faster you make the shutter speed, the darker the
image becomes. Check the brightness in the
viewfinder, and if necessary increase the lighting
level or adjust the iris.
• When the shutter speed is very fast, shooting a high
intensity subject may cause long vertical tails to
appear on the highlights (smear).
3 Turn the MENU dial to select the required shutter
speed, scan frequency or EVS.
The shutter speed or clear scan frequency setting
changes in the following order:
Note on setting the CLS function
DSR-370/570WS
1/100
The vertical scan frequencies of computer screens
vary, and it may not be possible to eliminate the
interference patterns entirely. Note also that the
vertical scan frequency may change depending on the
software being run.
(Value when
shipped)
1/60
1/250
1/500
1/1000
1/2000
EVS
DSR-370P/570WSP
DSR-370/570WS
200.3Hz
201.4Hz
60.4Hz
50.3Hz
•
•
•
•
•
•
DSR-370P/570WSP
130
Chapter 5 Adjustments and Settings
When using the clear scan function
Watching the monitor screen, adjust the frequency
to give minimum interference.
If there is a black band in the monitor image,
reduce the frequency, and if there is a white band,
increase the frequency.
To return from the basic menu to the normal
indications
Press the MENU switch as many times as necessary
until the normal indications appear. The new setting
of the shutter speed or clear scan frequency appears in
the normal screen display.
When shooting is finished
Set the SHUTTER switch to the OFF position.
The SHUTTER indicator in the viewfinder goes off.
Chapter 5 Adjustments and Settings
131
Viewfinder Screen Adjustments
The following adjustments are provided to improve the
visibility of the viewfinder screen.
Contrast and brightness adjustment
Although these adjustments may make the viewfinder
image clearer, they have no effect on the output video
signal from the camcorder.
Carry out these adjustments with the color bars
displayed.
1 Set the OUTPUT/DL/DCC+ switch to the BARS
position.
Eyepiece focusing knob
BRIGHT control
The color bars appear in the viewfinder.
CONTRAST control
PEAKING control
2 Watching the color bars, turn the CONTRAST and
BRIGHT controls to adjust the contrast and
brightness.
3 Return the OUTPUT/DL/DCC+ switch to its
original position.
OUTPUT/DL/
DCC+ switch
Outline emphasis adjustment
Turning the PEAKING control changes the degree of
outline emphasis in the viewfinder image, to make
focusing easier.
Adjusting the eyepiece focus
Depending on the eyesight of the operator — whether
longsighted or shortsighted — the optimal position of
the viewfinder image varies. Adjust the eyepiece
focus to get the clearest viewfinder image for your
eyesight. First focus the image with the lens, then
adjust the eyepiece focusing knob. The adjustment
range is from –3 to 0 diopters1) (default when shipped
is 0 diopters).
Using an optional part allows you to modify the
adjustment range to –2 to +1 diopters or –0.5 to +3
diopters.
For details, consult your Sony dealer.
..........................................................................................................................................................................................................
1) Diopter: A unit to indicate the degree of convergence or
divergence of a bundle of rays.
132
Chapter 5 Adjustments and Settings
Adjusting the Lens
Flange Focal Length Adjustment
It is necessary to adjust the flange focal length (the
distance from the lens flange to the plane of the image
along the optical axis) in the following cases.
• When a lens is fitted for the first time
• After changing lenses
• When during zoom operations the focus does not
match properly from telephoto to wide angle
4,11
2 1
3
About 3 m (10 feet)
Flange focal length
adjustment test chart
9
8
6
7 5
ZOOM
MANU.
SERVO
1 Set the IRIS selector to the M position.
7 Turn the focus ring so that the test chart is in focus.
2 Turn the iris ring to open it.
8 Turn the zoom ring to the wide angle position.
3 Place the supplied flange focal length adjustment
test chart at a range of about 3 meters (10 feet), and
adjust the light so that an appropriate video output
level is obtained with the iris open.
9 Turn the F.B fixing ring so that the test chart is in
focus. Do not move the focusing ring.
10Repeat steps 6 to 9 until the image stays in focus
from telephoto to wide angle.
4 Loosen the F.B fixing knob.
11After adjustment, tighten the screw of the F.B
5 Set the ZOOM selector to the MANU. position.
6 Turn the zoom ring to the telephoto position.
fixing knob.
Chapter 5 Adjustments and Settings
133
Adjusting the Lens
Iris Adjustments
Iris ring
Instant automatic
iris button
ZEBRA button
Iris selector
A.IRIS MODE switch
There are three ways of adjusting the iris:
automatically, manually, and with the instant
automatic iris adjustment function.
To make the image clearer when shooting a
subject lit by a spotlight
In the automatic iris adjustment mode, set the A.IRIS
MODE switch to SPOT L, turning the indicator on.
Iris adjustment
Adjustment method
Operation
Using the zebra pattern in manual
adjustment mode
Automatic adjustment mode
The iris is adjusted automatically to
adapt to changes in the brightness of
the subject. This is the mode for
normal shooting.
Set the iris selector
to the A position.
To use the zebra pattern as a guideline for iris
adjustment in manual adjustment mode, press the
ZEBRA button to set it on.
Select the zebra pattern to be displayed in advanced
menu page 4 (see page 102).
Manual adjustment mode
Use this mode in the following cases:
• For special effects
• When filming a person with a very
bright sky background
• When shooting a subject with
extreme contrast
The zebra pattern can be used as a
guideline for iris adjustment.
Set the iris selector
to the M position
and turn the iris ring
as required.
• When the subject is a person
Adjust the iris manually so that the zebra pattern
appears on the highlights of the subject’s face.
• For other subjects
Adjust the iris manually so that the zebra pattern
appears on the most important parts of the subject.
Instant automatic adjustment
function
While in manual adjustment mode,
this function makes a temporary
automatic adjustment.
With the iris selector
in the M position,
hold down the
instant automatic iris
button for as long as
necessary.
Designating the lens
You have to designate the lens number according to
the types of your lens.
To make the image lighter when shooting
against the light
If the number is not designated properly, other colors
may appear on the upper and lower of the screen when
shooting a white subject.
In the automatic iris adjustment mode, set the A.IRIS
MODE switch to BACK L, turning the indicator on.
Set the number in advanced menu page 4 (page 102)
according to the following table.
134
Chapter 5 Adjustments and Settings
Lens for DSR-370/370P (1/2-inch type)
Lens number
Iris sensitivity trimmer (S
or IRIS GAIN is indicated.)
Product
1
Fujinon: VCL-714, S16X6.7B
Canon: YH18X6.7KRS, VCL-719BX
2
Fujinon: S15X6.1BE, S16X6.7BE,
S19X6.5B, S19X6.5BE, S20X6.1BE
Canon: YH18X6.7IRS, H21aX5.8, H15aX6,
H9aX3.8
IRIS
GAIN
Fujinon: VCL-716BX
3
4
When referring data setting to your Sony
dealer.
Lens for DSR-570WS/570WSP (2/3-inch type)
Product
You can see the iris sensitivity trimmer when
removing the gum cap on the front of the lens driving
unit. Use a mini-screwdriver to turn the trimmer. If
you turn it clockwise, the sensitivity increases, and if
you turn it counterclockwise, the sensitivity decreases.
It is recommended that you confirm the iris sensitivity
after replacing the lens.
Lens number
1
Fujinon: VCL-916BYA, A16X9 BRM,
A12X6.8 BRM
Canon: VCL-918BY, VCL-919BY,
YJ18X9B KRS
Fujinon: A10X4.8 BEVM/BERD, A15X8
BERM/BERD, A16X9 BERM, A20X8
BEVM/BERD, A19X8.7 BERM, A19X8.7
BRM
2
For more information, refer to the operating instructions for
the lens (or consult the lens maker).
Canon: J9aX5.2B IRS/IAS, J15aX8B IRS/
IAS
3
4
Canon: J21aX7.8B IRS/IAS, YJ18X9B IRS
When referring data setting to your Sony
dealer.
Macrophotography
If you use the lens that is not mentioned above, set the
lens number as follows:
• When using a lens without an extender, set it to 1.
• When using a lens with an extender, set it to 2.
• When using a lens with a ratio converter, set it to 2.
Use the macro function when the subject is less than
about 1.1 m (4 feet) (for the VCL-716BX) from the
front of the lens. It is possible to shoot close-ups down
to a range of 10 mm (wide angle, f = 7.5 mm).
2
4
3
You can also ask a Sony dealer more precise settings,
according to your lens. In this case, set it to 4.
1
Adjusting the Iris Sensitivity
When you use the VCL-716BX or VCL-719BX lens,
you usually need not adjust the iris sensitivity because
lenses are equipped with iris sensitivity adjustment
function.
In auto iris mode, if hunting or response delay
happens, adjust the iris sensitivity using the iris
sensitivity trimmer.
ZOOM
MANU.
SERVO
1 Bring the lens up to the subject so that the image is
the required size.
2 Move the focusing ring to the closest focus
position.
(Continued)
Chapter 5 Adjustments and Settings
135
Adjusting the Lens
3 Slide the M button toward the rear of the
camcorder, and turn the MACRO ring fully in the
direction shown by the arrow.
4 Move the ZOOM selector to the MANU. position,
and turn the manual zoom control to focus the
image.
Ending close-up shooting
Return the MACRO ring to its original position (turn
fully in the opposite direction to the arrow in the
figure).
Reducing the size of the image
After completing steps 1 to 4 above, if you wish to
reduce the size of the image, turn the MACRO ring
back slightly, then use the manual zoom control again
to focus the image.
136
Chapter 5 Adjustments and Settings
Settings for Special Cases
Settings for special cases
Shooting conditions
Setting
Effect
The background is very bright, and the
subject is too dark.
Set the A.IRIS MODE switch to BACK L, This lightens the foreground.
turning the indicator on.
The subject is under a spotlight.
Set the A.IRIS MODE switch to SPOT L, This prevents white burn-out in highlights
turning the indicator on.
of faces and clothes.
The subject is completely still (e.g. when Enable the EVS (Enhanced Vertical
This enhances the vertical resolution.
shooting documents, drawings, etc.).
definition System) function. (See page
130.)
Note
Enabling the EVS function tends to
increase the occurrence of aliasing
problems (moiré patterns). Therefore,
normally leave the function disabled.
When you wish to give a lush effect, as
when shooting a wedding or similar
occasion.
This increases the saturation of primary
colors.
Use HISAT file. (See page 108.)
Shooting under fluorescent lighting.
Use FL file. (See page 108.)
This eliminates the blue-green cast, and
restores natural hues.
When shooting bright areas mixed with
dark areas (Example: A person indoors page 2 and, then set the OUTPUT/DL/
Set DL to ON in the advanced menu
This prevents white breakup and color
faults in bright areas.
looking through a window at a bright
landscape outdoors)
DCC+ switch to CAM DL. (See page
100.)
When adjusting for skin detail or tone
(Example: When shooting to hide skin
details)
See “Skin Detail Correction” or
“Adjusting Color in the Specified Area”
(page 138).
This adjusts the skin detail or tone to a
designated active area.
To make focusing before shooting
easier.
Press the EZ FOCUS button, turning the This opens the iris, to make it easier to
“easy focus” function on. (See page 16.) focus before beginning shooting.
To begin shooting immediately when
there is no time to make adjustments.
Press the EZ MODE button, turning the This provides automatic adjustment to a
“EZ mode” function on. (See page 17.)
set of standard values, to allow
immediate shooting.
The 3200 K preset white balance makes Change the setting of the preset white
This prevents the picture from reddening.
the picture reddish.
balance on basic menu page 2 (see
page 93).
Chapter 5 Adjustments and Settings
137
Settings for Special Cases
Skin Detail Correction
Adjusting Color in the Specified
Area
This camcorder provides an easy push-button function
that designates an active skin tone area
You can adjust the color of the specified area. Perform
the same procedure as for the skin detail correction to
designate the target area.
Note
The SKIN DTL SET button is disabled while a title is
displayed in basic menu page 8 or color bars are
displayed. Before skin detail correction, clear the title
or color bars display.
1 Turn the POWER switch on with holding down the
MENU dial so that you can access the advanced
menu.
2 Display advanced menu page 12 (page 11 on DSR-
SKIN DTL
370/370P).
ON
OFF 1
SET
2,3
1 Set the SKIN DTL switch to ON.
3 Perform the procedure for the skin detail correction
to designate the area to which you apply color
adjustment.
The indication “SKIN AREA: 0” appears in the
viewfinder.
While this procedure is being performed, the menu
is not displayed.
2 Press the SKIN DTL SET button.
This causes the area detect cursor to be shown in
the viewfinder (for 10 seconds).
4 When advanced menu page 12 (page 11 on DSR-
370/370P) appears, change the value of the SKIN
SAT or SKIN HUE to adjust color in the area
designated in step 3.
3 Place the area detect cursor on the target, then
press the SKIN DTL SET button.
Note
This designates the correction area, which is
indicated by a zebra pattern, and the indication
“SKIN AREA: 0” appears again. If the area
detect cursor disappears before designating the
area, press the SKIN DTL SET button again to
display the cursor. (Return to step 2.)
Set the SKIN DTL to 1.0 in basic menu page 2 if the
skin detail correction is unnecessary.
4 Turn the MENU dial to change the SKIN AREA
value (–99 to +99)so that the zebra pattern may be
displayed in the target area.
Use basic menu page 2 to set the correction level
(see page 93).
You can also change color in the designated area
(see the following section).
138
Chapter 5 Adjustments and Settings
Appendix
Important Notes on Operation
Fitting the zoom lens
Avoid violent impacts
Dropping the unit, or otherwise imparting a violent
shock to it, is likely to cause it to malfunction.
It is important to fit the lens correctly, as otherwise
damage may result. Be sure to refer to the section
“Fitting the Lens” (See page 39).
After use
Turn the POWER switch off.
Do not cover the unit while operating
Putting a cloth, for example, over the unit can cause
excessive internal heat build-up.
When not use for a period time
Remove the battery pack.
Operation and storage
Avoid storing or operating the unit in the following
Shipping
conditions.
• Remove the cassette before transporting the unit.
• If sending the unit by truck, ship, air or other
transportation service, pack it in the shipping carton
of the unit.
• In excessive heat or cold (operating temperature
range: 0°C to 40°C (32°F to 104°F))
Remember that in summer in warm climates the
temperature inside a car with the windows closed can
easily exceed 50°C (122°F).
Care of the unit
Remove dust and dirt from the surfaces of the lenses
• In damp or dusty locations
or optical filters using a blower.
• Locations where the unit may be exposed to rain
• Locations subject to violent vibration
• Close to radio or TV transmitters producing strong
electromagnetic fields.
If the body of the unit is dirty, clean it with a soft, dry
cloth. In extreme cases, use a cloth steeped in a little
neutral detergent, then wipe dry. Do not use organic
solvents such as alcohol or thinners, as these may
cause discoloration or other damage to the finish of the
unit.
Viewfinder
• Do not leave the unit with the eyepiece pointing
directly at the sun.
In the event of operating problems
If you should experience problems with the unit,
contact your Sony dealer.
The eyepiece lens can concentrate the sun’s rays and
melt the interior of the viewfinder.
• Do not use the viewfinder close to strong magnetic
fields. This can cause picture distortion.
Appendix
139
Important Notes on Operation
Characteristics of CCD Sensors
The following effects may appear in the image. They
are characteristic of camcorders using CCDs (charge-
coupled devices), and do not indicate a malfunction.
Vertical smear
When shooting a very bright object, such as a light, the
highlight tends to produce vertical tails. This effect is
much reduced in this camcorder. (Use of the electronic
shutter increases this effect.)
Vertical tail on the image
Monitor screen
Bright object
(electric light, sun,
etc.)
White flecks
White flecks may appear on the screen during use
under high-temperature conditions. White flecks may
also appear under normal temperature conditions if the
sensitivity is increased (especially to +18 dB or
higher).
140
Appendix
Cleaning the Video Heads
Always use the special-purpose Sony DVM-12CLD
Cleaning Cassette for cleaning the audio and video
heads. Follow the instructions with the cleaning
cassette carefully, as inappropriate use of the cleaning
cassette can damage the heads.
Note
The DVM-12CLD Cleaning Cassette can be used only
once. When the DVM-12CLD is loaded in the
camcorder, only STOP, PLAY and EJECT buttons
function.
Replacing the video heads
If cleaning the video heads fails to restore picture
quality, the heads may be due for replacement.
Keep a check of the hours of head drum operation:
with normal use, the heads should need replacing
after about 1,500 hours of use.
When the heads need replacement, contact your Sony
dealer.
Check the hours of head drum operation using the VCR
menu. For details see “Checking the Total Operating
(Power-On) Hours — Menu 201” on page 119.
Replacing other parts
For replacement of all parts other than the video heads,
contact your Sony dealer.
Appendix
141
Warning System
When the camcorder is powered on, or if a fault occurs
during operation, a warning is given in the following
ways:
• By warning indications in the display window.
• By means of the WARNING indicator together with
a warning tone from the speaker or earphone.
• By the warning indicators in the viewfinder.
You can adjust the volume of the warning tone with
the ALARM knob. When this knob is turned to the
minimum position, there is no sound output at all.
Operation warnings and action to be taken
Display window
State
WARNING indication Warning tones Viewfinder indicators
Continuous REC/TALLY BATT
Continuous
1 blinks/s
Machine
action
Problem
What to do
Continuous
1 beep/s
Warning
(blinking/
indication
1 blinks/s
Continuous)
4 beeps /s
4 blinks /s
4 blinks/s
Video head After
Clean the
heads. If the
problem
gaps
detecting
clogged or head
problem in clogging,
a)
a)
persists,
a)
RF
Continuousa)
recording
circuit.
recording
continues
but quality is your Sony
power off,
and consult
poor.
Servo lock Recording
lost. continues
dealer.
Power off,
and consult
a)
a)
a)
SERVO Continuousa)
but quality is your Sony
poor.
dealer.
Condensa- The VCR
Without
powering
off, wait until
the HUMID
tion on stops, and
head drum. all
operations
HUMID
SLACK
Continuous
Continuous
are inhibited indication
except eject. disappears.
The tape
Operation
Consult your
Sony dealer
before doing
anything.d)
cannot be stops.
wound
properly.
Close to
the end of continues.
tape.
Operation
Replace the
cassette as
soon as
Blinkinga)
(1 blink/s)
a)
c)
c)
possible.
TAPE
BATT
End of
tape.
Recording, Replace the
playback or cassette or
fast forward rewind.
stops.
Blinking
(4 blinks/s)
b)
c)
Battery
almost
exhausted.
Operation
continues.
Replace the
battery as
soon as
Blinking
(1 blink/s)
b)
(Blinking in
reverse phase)
possible.
Blinking
(4 blinks/s)
Battery
exhausted. stops.
Operation
Replace the
battery.
a) During recording or at recording pause.
b) Except during playback, fast forward, rewind and
recording review
For details of warning messages displayed in the viewfinder,
see page 88.
c) During recording only
d) Do not operate the camcorder with “SLACK” indication
displayed or the tape may be damaged.
142
Appendix
Condensation
If you move a camcorder suddenly from a very cold
place to a warm place, or use it in a very humid
location, condensation may form on the head drum. If
it is operated in this state, the tape may adhere to the
drum, and cause a failure or even permanent damage.
Take the following steps to prevent this from
happening:
• Remove the cassette before moving the camcorder
from a very cold place to a warm place.
• Before inserting a cassette, turn the power on, and
check that the HUMID indication is not showing in
the display window. If it is showing, wait — do not
insert a cassette until the HUMID indication
disappears. You can save waiting time if you keep the
camcorder powered.
For details of cassette insertion and removal, see the section
“Recording on the Internal VCR” on page 60, and for
details of the HUMID indication, see the section “Warning
System” on page 142.
Appendix
143
Troubleshooting
You can use this chart to establish possible causes of
an apparent problem; always double-check before
sending the camcorder for repair. If a problem persists,
contact your Sony dealer.
Troubleshooting chart
Symptoms
Cause
Remedy
The camcorder does not power on when There is no battery pack loaded.
you turn the POWER switch on.
Load a battery pack (page 53).
The battery pack has reached the end of Replace the battery pack with a fully
its usable life.
The AC power adaptor is not connected, Connect the AC power adaptor (page
or it is not turned on. 55).
charged one (page 53).
The tape transport does not operate
when you press either VTR button.
The POWER switch of the unit is turned Turn the POWER switch on (page 17).
off.
The camcorder has reached the end of
tape.
Rewind the tape, or load a new cassette
(page 61).
The cassette is set record-inhibited.
Either load a new cassette, or release
the record-inhibit (page 59).
An incorrect type of DVCAM or DV
cassette is loaded.
Load a correct type of DV or DVCAM
cassette (page 59).
(The
The camcorder has reached the end of Either rewind the tape, or load a new
tape. cassette (page 61).
The cassette holder is not solidly closed Press on the “PUSH” indication to close
indication blinks.)
The tape transport does not operate
when you press any tape transport
button.
after the cassette is inserted.
the holder solidly (page 61).
The power supply cuts while operating.
The battery goes dead very quickly.
The battery pack is exhausted.
Replace the battery pack with a fully
charged one (page 53).
The operating temperature is very low.
Use a BP-L60/L60A or BP-L90/L90A/
M100 (page 53).
Recharge the battery pack (page 53).
The battery pack is inadequately
charged.
The battery pack is exhausted.
It is not possible to eject the cassette.
Replace the battery pack with a fully
charged one (page 53).
The POWER switch is turned off.
Turn the POWER switch on. (page 17)
Press on the “PUSH” indication to close
the holder solidly and then press the
EJECT button (page 61).
The cassette holder is not solidly closed
after the cassette is inserted.
The playback picture quality is poor.
The playback picture does not appear.
The playback sound does not hear.
The video heads are dirty.
Clean the video heads using a DVM-
12CLD Cleaning Cassette (page 141).
All controls except the EJECT button are There is condensation on the head
Remove the cassette, power off, and
wait until the condensation has
evaporated (page 143).
disabled.
drum.
Audio recording is not possible.
Adjust the setting of the AUDIO LEVEL
(CH-1/CH-2) knobs (page 19).
The AUDIO LEVEL (CH-1/CH-2) knobs
are set to the minimum level.
The AUDIO LEVEL knob on the front is
set to the minimum level.
Adjust the setting of the AUDIO LEVEL
knob (page 15).
Adjust the setting of the AUDIO LEVEL
(CH-1/CH-2) knobs, and record again
(page 19).
The audio level is too high.
The recorded sound is distorted.
The recorded sound has a high noise
level.
The audio level is too low.
Adjust the setting of the AUDIO LEVEL
(CH-1/CH-2) knobs, and record again
(page 19).
(Continued)
144
Appendix
Troubleshooting chart (continued)
Cause
Symptoms
Remedy
The unit has failed in loading or saving
the cassette memory data.
The indication “Er91-13F” appears in the
display window.
Load a new cassette (page 59).
An incorrect type of cassette is loaded.
Load a correct type of cassette (page
59).
The cassette is automatically ejected.
The time code setting is not possible.
At the recording, the ClipLink function is Only the REGEN mode can be used for
set to on (meaning ClipLink shooting is ClipLink shooting. If you will not perform
allowed) in menu 211, CONT is displayed ClipLink shooting, set the ClipLink
in the display window and the time code function to oFF (see page 123).
generator is in the REGEN mode.
The time code value does not advance
though the TC mode switch 1 or 2 is set
to the F-RUN or DATE/TIME.
Appendix
145
Specifications
Input connectors AUDIO IN CH-1/CH-2:XLR-3 pin
× 2, male
DSR-370/370P
–60 dBu, 3 kΩ
Imaging element Three-chip interline transfer CCD
Pixel resolution 768 (horizontal) × 494 (vertical)
(DSR-370)
+4 dBu, 10 kΩ
(0 dBu = 0.775 Vrms)
GEN LOCK IN: BNC
1.0 Vp-p, 75 Ω
752 (horizontal) × 582 (vertical)
(DSR-370P)
VIDEO IN: BNC
Imaging area
6.4 × 4.8 mm (corresponds to 1/2
-
1.0 Vp-p, 75 Ω
inch picture tube)
(When fitting DSBK-501/501P.
The connector shares with GEN
LOCK IN)
Built-in filter settings
1: 3200K
2: 5600K + 1/8ND
3: 5600K
TC IN: BNC
0.5 to 18 Vp-p, 10 kΩ
DC IN: XLR-4 pin, female
Output connectors
4: 5600K + 1/64ND
Sony 1/2-inch bayonet mount
Lens mount
Signal standards EIA standard signal (NTSC color
system) (DSR-370)
DV OUT: 6-pin IEEE1394, ×1
AUDIO OUT CH-1/CH-2: phono
jack
–10 dBu, 47 kΩ
(0 dBu = 0.775 Vrms)
VIDEO OUT:
CCIR standard signal (PAL color
system) (DSR-370P)
Scanning system 525 lines, 2:1 interlace (DSR-370)
625 lines, 2:1 interlace
(DSR-370P)
BNC, 1.0 Vp-p, 75 Ω
MONITOR OUT:
Scanning frequencies
Horizontal: 15.734 kHz
(DSR-370)
15.625 kHz (DSR-370P)
Vertical: 59.94 Hz (DSR-370)
50.00 Hz (DSR-370P)
BNC, 1.0 Vp-p, 75 Ω
S VIDEO OUT: DIN 4 pin
1.0 Vp-p, 75 Ω
TC OUT: BNC, 1.0 Vp-p,
75 Ω
DC OUT: 4 pin, male
EARPHONE: mini-jack
–∞ to –15.5 dBu variable, 8 Ω
LENS: 12-pin
Synchronization Internal sync
External sync, using signal input
(VBS or BS) to the GEN LOCK
IN/VIDEO IN connector or
input to the VTR/CCU
VF: 20-pin
LIGHT : 2-pin
connector.
Horizontal resolution
VTR/CCU: 26-pin
Control connectors
REMOTE 1: stereo mini-jack
REMOTE 2: 10-pin
800 TV lines (center)
Minimum illumination
0.5 lux (at f/1.4, +36 dB)
0.8 lux (at f/1.8, +36 dB)
Power supply
11 to 17 V DC
Sensitivity
Gain levels
2000 lux (f/11.0 standard, 3200 K)
Selectable –3 dB, 0 dB, 3 dB, 6 dB,
9 dB, 12 dB, 18 dB, 18 dB +
DPR, 24 dB, 24 dB + DPR, hyper
gain (30 dB + DPR)
Power consumption
20 W
Operating temperature
0°C to 40°C (32°F to 104°F)
Storage temperature
Video S/N ratio (output from the VIDEO OUT
connector)
–20°C to +60°C (–4°F to 140°F)
3.5 kg approx. (7 lb 11 oz)
(camcorder only)
62 dB (typical) (DSR-370)
60 dB (typical) (DSR-370P)
0.05% for all zones, without lens
Mass
Registration
146
Appendix
External dimensions in millimeters (inches)
Minimum illumination
0.25 lux (at F/1.4, +42 dB)
0.4 lux (at F/1.8, +42 dB)
2000 lux (F/11.0 standard, 3200 K)
Selectable –3 dB, 0 dB, 3 dB, 6 dB,
9 dB, 12 dB, 18 dB, 18 dB +
DPR, 24 dB, 24 dB + DPR, hyper
gain
Sensitivity
Gain levels
121
270 (103⁄4
536 (211⁄8
)
(47⁄8
)
Video S/N ratio (output from the VIDEO OUT
connector)
63 dB (typical) (DSR-570WS)
61 dB (typical) (DSR-570WSP)
0.05% for all zones, without lens
242 (95⁄8
)
)
Registration
Input connectors AUDIO IN CH-1/CH-2:XLR-3 pin
× 2, female
DSR-570WS/570WSP
–60 dBu, 3 kΩ
Imaging element Three-chip interline transfer CCD
Pixel resolution 980 (horizontal) × 494 (vertical)
(DSR-570WS)
+4 dBu, 10 kΩ
(0 dBu = 0.775 Vrms)
GEN LOCK IN: BNC
1.0 Vp-p, 75 Ω
980 (horizontal) × 582 (vertical)
(DSR-570WSP)
VIDEO IN: BNC
Imaging area
9.6 × 5.4 mm (corresponds to 2/3
-
inch picture tube)
1.0 Vp-p, 75 Ω
(When fitting DSBK-501/501P.
The connector shares with GEN
LOCK IN)
Built-in filter settings
1: 3200K
2: 5600K + 1/8ND
3: 5600K
TC IN: BNC
0.5 to 18 Vp-p, 10 kΩ
DC IN: XLR-4 pin, male
Output connectors
4: 5600K + 1/64ND
Lens mount
Sony 2/3-inch bayonet mount
Signal standards EIA standard signal (NTSC color
system) (DSR-570WS)
CCIR standard signal (PAL colour
system) (DSR-570WSP)
Scanning system 525 lines, 2:1 interlace (DSR-
570WS)
625 lines, 2:1 interlace
(DSR-570WSP)
Scanning frequencies
DV OUT: 6-pin IEEE1394, × 1
AUDIO OUT CH-1/CH-2: phono
jack
–10 dBu, 47 kΩ
(0 dBu = 0.775 Vrms)
VIDEO OUT:
BNC, 1.0 Vp-p, 75 Ω
MONITOR OUT:
BNC, 1.0 Vp-p, 75 Ω
S VIDEO OUT: DIN 4 pin
1.0 Vp-p, 75 Ω
TC OUT: BNC, 1.0 Vp-p,
75 Ω
DC OUT: 4 pin, female
EARPHONE: mini-jack
–∞ to –15.5 dBu variable, 8 Ω
LENS: 12-pin
Horizontal: 15.734 kHz
(DSR-570WS)
15.625 kHz (DSR-570WSP)
Vertical: 59.94 Hz (DSR-570WS)
50.00 Hz (DSR-570WSP)
Synchronization Internal sync
External sync, using signal input
(VBS or BS) to the GEN LOCK
IN/VIDEO IN connector or
input to the VTR/CCU
VF: 20-pin
VTR/CCU: 26-pin
LIGHT : 2-pin
connector.
Horizontal resolution
Control connectors
REMOTE 1: stereo mini-jack
REMOTE 2: 10-pin
16:9 Mode: 800 TV lines (center)
4:3 Mode: 850 TV lines (center)
Appendix
147
Specifications
Power supply
Power consumption
24 W
Operating temperature
0°C to 40°C (32°F to 104°F)
11 to 17 V DC
Audio system (at playback with the DSR-
1800/1800P)
Frequency response
2-channel mode: 20 Hz to 20 kHz
+0.5/–1.0 dB
Storage temperature
4-channel mode: 20 Hz to 14.5
kHz +0.5/–1.0 dB
–20°C to +60°C (–4°F to 140°F)
3.7 kg approx. (8 lb 2 oz)
(camcorder only)
Dynamic range
Min. 80 dB
Mass
Distortion (THD) (1 kHz, Max. 0.08%
reference level, 48 kHz)
External dimensions in millimeters (inches)
242 (95⁄8
)
DXF-801/801CE Viewfinder
Picture tube
Indicators
1.5-inch monochrome
REC/TALLY (×2), BATT,
SHUTTER, GAIN UP
600 TV lines
Resolution
Power supply
Power consumption
12 V DC
280 (111⁄8
536 (211⁄8
)
121
(47⁄8
)
)
2.1 W
Mass
620 g approx. (1 lb 5 oz)
Maximum external dimensions (w/h/d)
241 × 91 × 203 mm
Tape transport system
(91/2 × 35/8 × 8 inches)
Tape speed
Approx. 28.2 mm/s
Recording/playback time (using PDV-184ME)
Max. 184 minutes
VCL-716BX Zoom Lens
Fast forward/rewind time (using PDV-184ME)
Max. 12 minutes
Focal length
Zoom
7.3 to 117 mm
Manual or motorized, selectable
zoom ratio: 16 ×
Usable cassettes
Maximum aperture
Iris control
1 : 1.9
Model name
Size
Manual or automatic, selectable
f/1.9 to f/16 and C (closed)
PDV-184ME/184N/124ME/124N/
94ME/94N/64ME/64N/34ME/34N
Standard size
PDVM-40ME/40N/32ME/32N/22ME/ Mini size
22N/12ME/12N
Range of object field
Wide angle: 823 × 617 mm
(32 1/2 × 24 3/8 inches)
Telephoto: 51 × 39 mm
(2 1/8 × 1 9/16 inches)
Video system (at playback with the DSR-
1800/1800P)
Minimum object distance
1 m (39 3/8 inches)
Bandwidth Luminance (Y) DSR-370/570WS: 30 Hz to
5.0 MHz 1.0 dB
Filter thread
Mount
External dimensions (w/h/d)
82 mm dia.; 0.75 pitch
DSR-370P/570WSP: 25 Hz
Sony 1/2 -inch bayonet mount
to 5.5 MHz +1.0/–2.0 dB
Chrominance
(R–Y/B–Y)
DSR-370/570WS: 30 Hz to
1.5 MHz +1.0/–5.0 dB
123 × 102 × 205 mm
(4 7/8 × 4 1/8 × 8 1/8 inches)
excl. lens grip and incl. lens hood.
1.2 kg approx. (2 lb 10 oz)
(including lens hood)
DSR-370P/570WSP: 25 Hz
to 2.0 MHz +1.0/–2.0 dB
Mass
S/N ratio
Luminance
Min. 55 dB
K-factor (K2T, KPB)
Y/C time delay
Max. 2%
Max. 30 nsec.
148
Appendix
Flange focal length adjustment test chart (1)
Binding ties (4)
VCL-719BX Zoom Lens
Operating Instructions (1)
Focal length
Zoom
6.7 to 127 mm
Manual or power, selectable;
Design and specifications are subject to change
without notice.
zoom ratio: 19 ×
Maximum aperture
Iris control
1:1.4
Manual or automatic, selectable;
f/1.4 to f/16 and C (closed)
Related Products
Range of object field
There is a range of Sony products available to meet
every conceivable video shooting requirement. For
details, consult your Sony sales representative or
supplier.
Wide angle: 772 × 579 mm
(301/2 × 227/8 inches)
Telephoto: 42 × 32 mm
(13/4 × 15/16 inches)
Focusing range
Filter threads
Mount
Infinity to 0.9 m
Lenses
82 mm dia., 0.75 pitch (on lens)
VCL series zoom lens
Sony 1/2-inch bayonet mount
LO-32BMT 2/3” lens adapter
External dimensions (w/h/d)
139.8 × 99.5 × 218.9 mm
Remote control unit
RM-M7G/LG1/VJ1 Remote Control Unit
(55/8 × 4 × 85/8 inches)
1.45 kg approx. (3 lb 3 oz)
(including lens hood)
Mass
Camera Control Unit
CCU-M5A/M5AP Camera Control Unit
CA-370 Intercom Adaptor
VTR products
BVV-5/5PS Videocassette Recorder
BVW-50/50P Portable Videocassette Recorder
DSR-70A/70AP/1500/1500P/1600/1600P/1800/
1800P/2000/2000P Digital Videocassete Recorder
VA-5/5P/90/90P VTR Adaptor
Operating temperature
0˚C to 40˚C (32˚F to 104˚F)
Storage temperature
–20˚C to +60˚C (–4˚F to 140˚F)
Dimensions (w/h/d)
45 × 140 × 112 mm
Battery products
BP-L40/L40A/L60/L60A/L90/L90A Battery Pack
NP-1B/BP-90A Battery Pack
(113/16 × 5 5/8 × 41/2 inches)
0.35 kg approx. (12 oz)
Mass
BP-M50/M100 Battery Pack
BC-1WD/1WDCE/410/410CE Battery Charger
BC-L50/L100/L100CE Battery Charger
BC-M50 Battery Charger
Supplied accessories
VCL-719BX Zoom Lens (1) (supplied with DSR-
370K1/370PK1)
VCL-716BX Zoom Lens (1) (supplied with DSR-
370K2/370PK2)
DXF-801/801CE Viewfinder (1)
Microphone (1)
Wind screen (1)
AC power supply
CMA-8A/8ACE AC Adaptor
AC-550/550CE/DN1/DN2B AC Adaptor
Synthesized tuner products
CA-WR855 Camera Adaptor
WRR-810A/855A/860A UHF Synthesized Tuner
VCT-U14 Tripod Adaptor (1)
Shoulder strap (1)
Lens mount cap (1)
Appendix
149
Specifications
Microphone products
ECM-670/672 Electret Condenser Microphone
C-74 Condenser Microphone
CAC-12 Microphone Holder
EC-0.5C2/0.3C2 Microphone Cable
Studio equipment
SEG-2550A/2550AP Special Effects Unit
DFS-300/300P/500/500P DME Switcher
DCK-500/500P Digital Chroma Keyer
WEX-2000 Wipe Pattern Extender
DXF-51/51CE 5-inch Viewfinder (monochrome)
CA-370 Intercom Adaptor
Cables and miscellaneous
The suffix number on a cable part number indicates the
length in meters: e.g. a CCZ-A2 is 2 meters long.
(Approximate equivalents in feet: 2 m = 6 ft, 5 m = 16
ft, 10 m = 33 ft, 25 m = 82 ft, 50 m = 164 ft, 100 m =
328 ft)
Camera cables with Z-type 26-pin connectors
CCZ-A2/A5/A10/A25
Camera cables with Q-type 14-pin connectors
CCZQ-A2/A5/A10/A2AM
i.LINK cable (DV connecting cable)
CCFD-3L (6-pin y 4-pin, 3.5m)
CCF-3L (6-pin y 6-pin, 3.5m)
DSBK-301A Index Picture Board
LCR-1 Rain Cover
LC-DS500 Carrying Case
LC-DS300SFT Soft Carrying Case
DSBK-501/501P Analog Composite Input Board
150
Appendix
Chart of Optional Components and Accessories
CCZ-A cable
CCU-M5A/M5AP Camera
Control Unit
Video monitor
EC-0.5C2/0.3C2 Microphone
Cable
ECM-670/672 and C-74
Microphone
CCZ-A cable
BVW-50/50P Betacam SP
VTR
CCZQ-A cable
S VHS VCR
CAC-12 Microphone Holder
CCZ-A cable
CCZ-A cable
VA-5/5P + BVV-5/5PS
DXF-51/51CE 5-inch
Viewfinder a)
VA-5/5P + DNV-5/5P
DSBK-501/501P
Analog Composite
Input Board a)
DSR-70A/70AP Digital Videocassete
Recorder
DSBK-301A Index
Picture Bord
DSR-1500/1500P/1600/1600P/1800/1800P/
2000/2000P Digital Videocassete Recorder
DVCAM mini size cassette tape
DVCAM standard size
cassette tape
DSR-370/370P/
570WS/570WSP
BC-1WD/
DC-L1
Battery Adaptor
1WDCE
Battery
Charger
CCA-7/CCA-7-7A cable
NP-1B
Battery Pack
RM-M7G
Remote Control Unit
DC-L90
Battery Adaptor
VCT-U14 Tripod
Adaptor
BC-410/410CE
Battery Charger
BP-90A
Battery Pack
Tripod
BP-L40 d)/L40A/L60/
L60A/L90/L90A/M50/
M100 Battery Pack
BC-L100/L100CE
Battery Charger
BC-L50/M50
Battery Charger
LC-DS300SFT Soft
Carrying Case
AC-DN1
CA-WR855
Camera
Adaptor
AC Adaptor b)
CMA-8A/8ACE or AC-
550/550CE AC Adaptor
LC-DS500 Carrying Case
LCR-1 Raincover
Intercom
Adaptor
CA-370
WRR-855A UHF
Synthesized Tuner
AC-DN2B
AC Adaptor c)
a) Optional accessory shoe kit is required for fitting. For details, consult your Sony dealer.
b) Use when power consumption of the camcorder and accessories is 38 W or lower.
c) When power consumption is 38 W or higher due to fiting a video light (with power
consumption of 30 W or lower) to the camcorder, use the AC-DN2A/DN2B (150 W or
lower).
d) It is recommended that the BP-L40/L40A be used at 30 W or less (See page 53).
Appendix
151
What Is ClipLink?
The ClipLinkTM function greatly improves the
efficiency of the video production process as a whole
by recording various editing-related data on tape when
shooting. As such, ClipLink is a revolutionary
function that transcends the conventional separation of
shooting and editing.
Next, begin rough editing by viewing the Index
Pictures on the EditStation’s GUI display and
rearranging them as you wish. This eliminates the
difficult work of matching up a handwritten shot list
with recorded scenes. After you have completed this
rough editing, you can then transfer only the
recordings needed for your video program.
Note
When an external equipment, such as VCR, is
connected to the DV OUT connector, the ClipLink
function will not work.
High-speed transfer of recordings
It is also possible to transfer the editing material itself
between the DSR-85/85P and ES-7 at four times
normal speed. In other words, the transfer can be
carried out in one fourth of the real time duration. It is
of course possible to carry out a transfer at four times
normal speed when backing up video and audio data
recorded on the disk drive to the DSR-85/85P, or in the
opposite direction when loading data backed up on the
DSR-85/85P to the disk drive. Thus the time required
is much shorter than with conventional equipment (for
which, for example, transferring a 40-minute segment
of video takes 40 minutes).
How ClipLink Changes Video
Production Techniques
The following describes various ways in which
ClipLink1) video production differs from conventional
video production.
Recording of ClipLink log data lightens
the shooting workload
When you start shooting a scene, ClipLink log data
such as the scene number and time code data are
automatically recorded into the cassette memory. This
eliminates the need for a conventional “shot list”
compiled by someone using a stopwatch, clipboard
and pencil. You can also designate unwanted scenes as
“NG” (no good) and automatically skip all “NG”
scenes when editing.
Note
When using a tape recorded by this camcorder to
transfer digital (video/audio/time code) signals at four
times normal speed from the DSR-85/85P Digital
Videocassette Recorder to the ES-7 EditStation for
editing purposes, there must be about at least 40
seconds of recording on the tape before the IN point.
To perform editing without problems, it is
recommended that you pre-record at least 40
seconds of color bar signals at the beginning of the
tape.
Recorded Index Pictures drastically cut
editing time
The ClipLink function also features Index
Pictures a time-saving tool for rough editing. Each
Index Picture is a compressed image taken from the
start of each scene, which is recorded onto the tape as
a still picture. When editing, begin by transferring
only the Index Pictures and the ClipLink log data to
the EditStation’s hard disk. You can also transfer OK
scenes only (“NG” scenes are skipped).
..........................................................................................................................................................................................................
1) The ClipLink system is a video production system which
uses the cassette memory function.
152
Appendix
ClipLink Operation Flow
The following is a detailed description of how to use
the ClipLink function during the video production
process.
Example System Configuration
The following illustration shows the optimum system
configuration for using the ClipLink function.
ClipLink operation is possible even with a system
containing existing analog equipment. However, note
that a part of functions are disabled.
Shooting
DVCAM standard cassette or DVCAM mini cassette
DSR-370/370P/
570WS/570WSP
Digital Camcorder
Index Pictures: recorded on
tape
ClipLink log data: recorded in
cassette memory
ClipLink log data recorded onto DVCAM cassettes
links shooting and editing operations.
ClipLink log data transfer
ES-3/7 EditStation™
non-linear editing
system
DSR-1600a)/1800/85b) (or
DSR-1600Pa)/1800P/85Pb))
Digital Videocassette
Recorder
Index Pictures
Video output (QSDI)
ClipLink log data
RS-422A interface
Editing
ES-3/7 EditStation™
non-linear editing
system
DSR-1600a)/1800/85b (or
DSR-1600Pa)/1800P/85Pb))
Digital Videocassette Recorder
Actual AV data
QSDI input/output
a) The DSR-1600/1600P is a videocassette player.
b) Between the DSR-85/85P and ES-7, quadruple transfer is possible through the QSDI.
Appendix
153
ClipLink Operation Flow
Data Generated When Shooting
The following describes the kinds of data that is
generated when using the ClipLink function.
Index Pictures
When shooting, a single-frame image from the Mark
IN point at the start of each scene is recorded as a still
picture into the DSBK-301A’s internal memory.
These images are called “Index Pictures”. When you
finish shooting, the Index Pictures from all scenes are
recorded onto the tape after the last scene.
Index Picture
0
90
180
270
360
450
540
630
1
2
3
4
60
120
180
240
300
360
420
5
6
7
8
9
10
14
18
22
26
30
11
15
19
23
27
31
12
16
20
24
28
32
13
17
21
25
29
Tape
Scene n
Scene 3
Scene 2
Scene 1
DSBK-301A’s internal
memory (option)
720 dots
After shooting, the Index
Pictures in the internal
memory are recorded onto
the video tape.
Seven frame spaces are reserved at the end of the last
scene as a recording area for Index Pictures. (A
cassette with 16 Kbits of cassette memory can record
up to 198 Index Pictures, and a cassette with 4 Kbits of
cassette memory can record up to 45 Index Pictures.)
Up to 32 Index Pictures can be recorded onto the tape
space normally occupied by one frame, as shown
below.
ClipLink log data
convenient alternative to the conventional “shot list”.
ClipLink log data includes the following items.
ClipLink log data can be recorded automatically or
manually into the cassette memory for use as a
ClipLink log data
Description
Data (maximum length: 8 digits) consisting of alphanumeric characters and/or symbols
(This is left blank at shipping.)
Reel number (cassette number)
Scene number
A three-digit number from 001 to 198 (starts at 001 and is automatically incremented
with each scene).
This cannot be changed (set to “1” at shipping).
Take number
OK/NG
Indicates the OK/NG status of a particular scene. (In the OK case, nothing is
recorded.)
Mark IN/OUT point time codes
Cue point time code
These are the time codes that indicate the Mark IN and Mark OUT points for each
scene (HH:MM:SS). These time codes are recorded when the camcorder has been
set to MARK mode.
The frame digit is incremented at each Mark IN point and is decremented at each Mark
OUT point. (For details, see “Time codes recorded for Mark IN/OUT points” on page
155.)
This is the time code that indicates the cue points (valid up to the frame digit). This
time code is recorded when the camcorder has been set to CUE mode. When in this
mode, the time codes at the start and end of a recording (the Rec IN and Rec OUT
time codes) are automatically recorded as Mark IN/OUT points.
154
Appendix
Cue point time codes
How to record ClipLink log data
This type of data is especially useful when shooting
scenes that may contain unexpected events, such as
when shooting for sports coverage or documentaries.
Set the camcorder to CUE mode before you start to
record. While recording, each time you press the
camcorder’s TAKE button, the current time code is
recorded as a cue point time code.
The following describes how to record the various
ClipLink log data items.
OK/NG status
To designate a scene as “NG”, press the NG button on
the camcorder while shooting the scene or at any time
before you begin shooting the next scene.
All scenes that do not receive an “NG” designation are
recorded as “OK” scenes.
Start
End
Index Picture 1
recording
recording
(When you exit the VCR recording mode, changing
the OK/NG status is no longer possible.)
Scene 1
Take 1
Mark IN/OUT points time codes
This data is especially useful when shooting a video
program for which a scenario has been created.
Set the camcorder to MARK mode before you start
shooting. While shooting, each time you press the
camcorder’s TAKE button, Mark IN and Mark OUT
time codes are recorded alternately.
Rec OUT
(automatic
recording)
Cue point
time code
(manual
Cue point
time code
(manual
recording)
Cue point
time code
(manual
recording)
Rec IN
(automatic
recording)
recording)
Index Picture 1
Index Picture 2
Start
recording
End
recording
Scene 1
Take 1
Scene 2
Take 1
Mark OUT (manual
recording)
Mark IN (manual
recording)
Mark OUT
(manual
recording)
Mark IN
(manual
recording)
Appendix
155
ClipLink Operation Flow
Time codes recorded for Mark IN/OUT points
There is a gap between actual time codes and Mark IN/
OUT time codes recorded in the cassette memory, as
shown in the figure below. The frame digit is
incremented at each Mark IN point and is decremented
at each Mark OUT point.
Mark IN
(or Rec IN)
Mark OUT
(or Rec OUT)
Cue
Actual time code
12:23:15:10
12:34:20:20
12:39:24:23
Frame digit
incremented
Frame digit
decremented
Cue
Time code
recorded in the
cassette memory
12:23:16
12:34:20:20
12:39:24
(The Index
Picture is the
image around
12:23:15:10.)
Recording capacity for Mark IN/OUT time codes and Cue point time codes
When in MARK mode, up to 198 pairs of Mark IN and
Mark OUT points can be recorded (if using a cassette
with 16 Kbits of cassette memory).
When in CUE mode, up to 396 time codes points
(including all cue point time codes and all Mark (Rec)
IN and Mark (Rec) OUT time codes) can be recorded
(if using a cassette with 16 Kbits of cassette memory).
156
Appendix
Glossary
Aliasing
Condensation
Horizontal resolution
The capability of a CCD camera to
preserve detail in the horizontal
resolution.
Usually expressed as the number
of vertical lines which can be
distinguished in the reproduced
image of a test chart.
Distortion of the signal caused by
overlap of the baseband signal and
lower sideband signal when the
signal is demodulated.
Condensation refers to tiny
droplets of water that can appear in
a device, such as in the tape
transport system. When
condensation occurs on a video
head drum, the tape may stick to
the drum, which can damage not
only the tape but also the VCR
unit.
Aperture compensation
Electronic compensation for
frequency response degradations
caused to sampled high-frequency
signals by the limited aperture of
CCD image sensors.
i.LINK
i.LINK stands for IEEE1394-1995
stan-dards and their revisions. It is
applied to the DV connector
through which DV signals can be
transmitted with AV protocol.
DCC
Dynamic Contrast Control. A
video camera containing a DCC
circuit can handle a wide dynamic
range of luminance.
Black balance adjustment
To balance the black levels of the
R, G, and B channels of a video
camera so that black has no color.
IRE scale
Drum
See “Head drum”.
The scale to determine video
signal amplitudes devised by the
Institute of Radio Engineers (IRE),
an American organization now
called the Institute of Electrical
and Electronic Engineers (IEEE).
The IRE scale includes a total of
140 units, with 100 up and 40
down from zero.
CCD
Charge-coupled device. A solid
state imager used in most recent
video cameras in place of a pickup
tube. It converts input light levels
into electrical charges, which are
once stored and then output in the
form of voltage variations.
Flare
Dark or colored flashes caused by
signal overload through extreme
light reflections of polished objects
or very bright lights.
Flicker
Center marker
Repeated change of brightness on
the screen, which is caused by
frequency difference between the
camera’s scanning and the
variations in the lightning.
PCM audio
A cross that indicates the center of
the image on the viewfinder
screen.
PCM stands for “pulse code
modulation.” PCM audio means
audio signals that have been
processed by pulse code
Color conversion filter
modulation. Each analog audio
signal is converted into pulses that
are generated in rapid succession,
and each pulse is recorded as a
digital signal having a value of 0
or 1.
An optical filter used with color
video cameras to convert the color
temperature of a light source.
Gen-lock
Abbreviation of “generator lock”.
It refers to the synchronization of a
VCR to a reference sync signal.
Color temperature
The temperature in Kelvins (K) to
represent the color of a light
source.
HAD
Hole-Accumulated Diode. A CCD
sensor structure designed to
suppress certain types of noise
inherent CCDs. See also CCD.
Pedestal level
A black level which is the absolute
black level of a video signal.
Composite video signal
A composite video signal includes
a video signal, burst signal, and
sync signal.
Return video
Head drum
This refers to a video signal
returned from the VCR to the
camera or from the CCU to one
camera in a multi-camera system,
allowing the camera operator to
monitor the image output from the
camera or shot on other cameras.
A metal cylinder to which a video
head is attached. This drum is
rotated at high speeds in
synchronization with the sync
signal during recording and
playback.
Appendix
157
Glossary
S/N
S video connectors
Video gain
Signal-to-Noise ratio. The relation
of the strength of the desired signal
to the accompanying electronic
interference, the noise. If S/N is
high, sounds are reproduced with
less noise and pictures are
Input/output connectors for
separate Y (luminance) and C
(chroma) signals. This method
eliminates interference between Y
and C signals that can occur in
conventional composite video
signals to obtain a higher-
resolution picture.
Amount of amplification for video
signals, expressed in decibels (dB).
White balance adjustment
In the light of a particular color
temperature, to adjust the white
levels of the R, G, and B channels
of a color video camera so that any
white object shot in that light is
reproduced as a truly white image.
reproduced clearly without snow.
Search
The search function enables
recorded images or time codes to
be viewed while the tape is played
back at various forward or reverse
speeds, as a means of locating a
particular scene in the taped
program.
Sync
This refers to the sync
(synchronization) signal. The sync
signal is used as a reference signal
for duplicating the scanning
patterns recorded via a camera
when playing back the recording
on a monitor. The sync signal
actually includes two signals: a
horizontal sync signal and a
vertical sync signal.
Zebra pattern
Striped patterns which appear in
the viewfinder to indicate areas of
the image where the video level is
about 70 IRE (NTSC) or 70%
(PAL). This unit can show areas
where the video level is 100 IRE
(NTSC) or 100% (PAL).
Standby-off mode
One of the stop modes. In this
mode, head drum rotation is
stopped and the tape tension is
slackened. It is not possible to
switch instantaneously from this
mode to recording or playback
mode. This mode is not harmful to
the tape or heads.
Time code
The time code is a tape position
information signal that includes
time and frame data that are
recorded onto the tape when
shooting so as to facilitate
searching of editing points and
recorded scenes when viewing or
editing.
Standby-on mode
One of the stop modes. In this
mode, the head drum continues
rotating and the tape remains
wound onto the drum. This mode
enables instantaneous switching to
recording or playback mode. To
prevent damage to the tape or
heads, the device automatically
switches from standby-on mode to
standby-off mode after a certain
period of time.
User bits
These are also referred to as
“users’ bits”. The user bits are a
32-bit segment of the time code
recording area. The user can select
what to record in this segment and
how to use the recorded data. For
example, it can be used to record
date information in addition to the
time code data or ID numbers for
tape reels or programs.
158
Appendix
Sony Corporation Printed in Japan
|
Vulcan Hart V SERIES HDR BROILERS VIR1SF User Manual
Sony PDW F355L User Manual
Sony DVCAM DSR PD170P User Manual
Sony DCR SR35E User Manual
Sony BLU RAY DISC BDV E470 User Manual
Smith Cast Iron Boilers GVIOM 5R User Manual
Samsung VP D26 User Manual
Samsung RB214AB User Manual
Samsung Car Video System B2430H User Manual
Samsung 6900 User Manual