Sony Car Stereo System NSZ GS7 User Manual

©ꢀ2012ꢀSonyꢀCorporation  
PrintedꢀinꢀChina  
4‑421‑770‑11(2)  
InꢀtheꢀBox  
US  
Network Media Player  
Remote control  
(Remote) (1)  
AC power cord (1)  
HDMI cable (1)  
(NSZ‑GX70 only)  
Quick Setup Guide (1)  
Getting Started (1)  
Reference Guide and  
other documents  
Quick Setup Guide  
Size AA batteries (2)  
Toꢀinsertꢀbatteriesꢀintoꢀtheꢀ  
remoteꢀcontrol  
What’s this?  
IR (infrared)  
Blaster  
cable (1)  
The IR Blaster enables you to control  
connected devices with your remote.  
Please see “To control connected  
devices using the remote” shown below  
for more information.  
Sony Customer Support  
NetworkꢀMediaꢀPlayer  
NSZ-GS7/NSZ-GX70  
Please Do Not Return the Product to the Store  
(NSZ-GX70ꢀisꢀonlyꢀforꢀtheꢀUS)  
Connection  
step  
Connect to your TV  
Follow : A to connect to your TV directly.  
: B to connect to your TV via AV Receiver  
: C if your connection differs from the diagrams below.  
1
A
Direct to TV  
B
To TV via AV Receiver  
C
Other connection  
See Help Guide for other connection patterns.  
HDMIꢀcableꢀ  
FromꢀyourꢀPC  
(suppliedꢀwithꢀNSZ-GX70ꢀonly)  
AV Receiver  
HDMIꢀcableꢀ  
(suppliedꢀwithꢀNSZ-GX70ꢀonly)  
TV  
TV  
Fromꢀyourꢀsmartphoneꢀ  
(optional)  
(optional)  
HDMIꢀcableꢀ(notꢀsupplied)  
HDMIꢀcableꢀ(notꢀsupplied)  
Set Top Box /  
Digital Video Recorder  
Set Top Box /  
Digital Video Recorder  
step  
step  
step  
Prepare for Network  
connection  
Connect to the power  
source  
Start the Initial Setup  
Wizard  
2 3 4  
ACꢀpowerꢀcord  
Follow the directions for the Initial Setup  
displayed on screen.  
Connect to the power  
source  
Change the TV input  
The screen may stay dark for several seconds after the  
Sony logo appears, then the Initial Setup screen appears.  
Switch the input selector on the TV  
so that the signal from the player  
appears on your TV screen.  
Then, a screen that shows how to  
setup your remote appears.  
When the Initial Setup screen (on which a picture of  
a player and a hand holding a remote is displayed)  
appears, press and hold (Enter) to pair your remote  
with the player.  
Wireless LAN  
router*1*2  
Broadband  
router*2  
Complete the Network setup process, otherwise the Initial  
Setup Wizard cannot be closed.  
Note  
LANꢀcableꢀ(notꢀsupplied)  
This will only appear the first time you setup your  
player.  
It takes about 15 minutes to complete the Initial Setup.  
*1 When using wireless connection, you need to set the Network Setup in the Initial Setup Wizard (on step 4).  
*2 You can find MAC address in the Initial Setup Wizard (step 4) as needed. Select “Explain step” on “Connect to the Internet” screen.  
Toꢀcontrolꢀconnectedꢀdevicesꢀusingꢀtheꢀremote  
This player is equipped with a built‑in IR Blaster that accepts remote commands and sends them to various connected devices to control them with your remote. This function works when the player is turned on.  
When you set the player close to a connected device (as illustrated on the  
right), you can control the device using the remote, including operations such as  
adjusting the volume of the TV or an AV Receiver.  
However, if you place the player in a location where IR signals cannot reach,  
you cannot control connected devices with the built‑in IR Blaster. In this case,  
connect the supplied IR Blaster as follows:  
*
IRꢀBlaster  
Connect the IR Blaster cable to the player.  
Place the IR Blaster so that the infrared transmitter points to the IR receiver  
(sensor) on the device you want to control, as illustrated on the right.  
* Location of the IR receiver may vary depending on the product you are using.  

Yorkville Sound Car Speaker LS1004 User Manual
Westcott 1823 User Manual
Vizio Car Satellite TV System E4011 A2 User Manual
Texas Instruments TITANIUM TI 89 User Manual
Sony WM EX525 User Manual
Sony HANDYCAM NEX VG10 User Manual
Sony DCR HC26 User Manual
Sony Camera Accessories aws g500 User Manual
Sony 3 452 779 1100000000#User Manual
Samsung LN32A330JD User Manual