Sony Blu ray Player BDV E490 User Manual

4-418-859-12(1)  
Blu-ray Disc™/  
DVD Home Theatre  
System  
Operating Instructions  
BDV-E490/BDV-E390/BDV-E385/BDV-E290/BDV-E190/BDV-T39  
and/or peripherals in order to meet  
FCC emission limits.  
apparatus combination to avoid  
injury from tip-over.  
plug from the AC outlet  
immediately.  
Important Safety  
Instructions  
1) Read these instructions.  
2) Keep these instructions.  
3) Heed all warnings.  
On watching 3D video  
images  
Some people may experience  
discomfort (such as eye strain,  
fatigue, or nausea) while watching  
3D video images. Sony  
13) Unplug this apparatus during  
lightning storms or when  
4) Follow all instructions.  
5) Do not use this apparatus near  
water.  
unused for long periods of time.  
14) Refer all servicing to qualified  
service personnel. Servicing is  
required when the apparatus  
has been damaged in any way,  
such as power-supply cord or  
plug is damaged, liquid has  
been spilled or objects have  
fallen into the apparatus, the  
apparatus has been exposed to  
rain or moisture, does not  
operate normally, or has been  
dropped.  
recommends that all viewers take  
regular breaks while watching 3D  
video images. The length and  
frequency of necessary breaks will  
vary from person to person. You  
must decide what works best. If you  
experience any discomfort, you  
should stop watching the 3D video  
images until the discomfort ends;  
consult a doctor if you believe  
necessary. You should also review  
(i) the instruction manual and/or the  
caution message of any other  
device used with, or Blu-ray Disc  
contents played with this product  
and (ii) our website (http://  
6) Clean only with dry cloth.  
7) Do not block any ventilation  
openings. Install in accordance  
with the manufacturer’s  
instructions.  
8) Do not install near any heat  
sources such as radiators, heat  
registers, stoves, or other  
apparatus (including  
amplifiers) that produce heat.  
9) Do not defeat the safety  
purpose of the polarized or  
grounding-type plug. A  
For the customers in  
Canada  
polarized plug has two blades  
with one wider than the other. A  
grounding type plug has two  
blades and a third grounding  
prong. The wide blade or the  
third prong are provided for  
your safety. If the provided  
plug does not fit into your  
outlet, consult an electrician for  
replacement of the obsolete  
outlet.  
esupport.sony.com/) for the latest  
information. The vision of young  
children (especially those under six  
years old) is still under  
development. Consult your doctor  
(such as a pediatrician or eye  
doctor) before allowing young  
children to watch 3D video images.  
Adults should supervise young  
children to ensure they follow the  
recommendations listed above.  
To reduce the risk of fire or electric  
shock, do not expose this apparatus  
to dripping or splashing, and do not  
place objects filled with liquids,  
such as vases, on the apparatus.  
The nameplate and the date of  
manufacture marking are located  
on the bottom exterior.  
Properly shielded and grounded  
cables and connectors must be used  
for connection to host computers  
and/or peripherals.  
10) Protect the power cord from  
being walked on or pinched  
particularly at plugs,  
For the customers in  
the U.S.A.  
convenience receptacles, and  
the point where they exit from  
the apparatus.  
Blu-ray Disc/DVD  
receiver (HBD-E390/  
HBD-E385/HBD-T39)  
This equipment must not be co-  
located or operated in conjunction  
with any other antenna or  
transmitter.  
Precautions  
11) Only use attachments/  
accessories specified by the  
manufacturer.  
On power sources  
• The unit is not disconnected from  
the mains as long as it is  
connected to the AC outlet, even  
if the unit itself has been turned  
off.  
12) Use only with the cart, stand,  
tripod, bracket, or table  
specified by the manufacturer,  
or sold with the apparatus.  
When a cart is used, use caution  
when moving the cart/  
• As the main plug is used to  
disconnect the unit from the  
mains, connect the unit to an  
easily accessible AC outlet.  
Should you notice an abnormality  
in the unit, disconnect the main  
This equipment complies with FCC  
radiation exposure limits set forth  
for an uncontrolled environment  
and meets the FCC radio frequency  
(RF) Exposure Guidelines in  
Supplement C to OET65.  
US  
3
This equipment should be installed  
and operated keeping the radiator at  
least 20cm or more away from  
person’s body (excluding  
extremities: hands, wrists, feet and  
ankles).  
unauthorized copies of some  
commercially-produced film and  
videos and their soundtracks.  
When a prohibited use of an  
unauthorized copy is detected, a  
message will be displayed and  
playback or copying will be  
interrupted.  
More information about Cinavia  
technology is provided at the  
Cinavia Online Consumer  
Information Center at http://  
additional information about  
Cinavia by mail, send a postcard  
with your mailing address to:  
Cinavia Consumer Information  
Center, P.O. Box 86851, San  
Diego, CA, 92138, USA.  
LLC in the United States and  
other countries.  
• Java is a trademark of Oracle and/  
or its affiliates.  
• “BD-LIVE” and  
“BONUSVIEW” are trademarks  
of Blu-ray Disc Association.  
• “Blu-ray Disc” is a trademark.  
• “Blu-ray Disc,” “DVD+RW,”  
“DVD-RW,” “DVD+R,” “DVD-  
R,” “DVD VIDEO,” and “CD”  
logos are trademarks.  
For the customers in  
Canada  
Blu-ray Disc/DVD  
receiver (HBD-E390)  
• “Blu-ray 3D” and “Blu-ray 3D”  
logo are trademarks of Blu-ray  
Disc Association.  
Operation is subject to the  
following two conditions:  
(1) this device may not cause  
interference, and (2) this device  
must accept any interference,  
including interference that may  
cause undesired operation of this  
device.  
• “BRAVIA” is a trademark of  
Sony Corporation.  
• “AVCHD” and the “AVCHD”  
logo are trademarks of Panasonic  
Corporation and Sony  
Copyrights and  
Trademarks  
• This system incorporates with  
Dolby* Digital and Dolby Pro  
Logic adaptive matrix surround  
decoder and the DTS** Digital  
Surround System.  
Corporation.  
, “XMB,” and “xross media  
bar” are trademarks of Sony  
Corporation and Sony Computer  
Entertainment Inc.  
This equipment complies with IC  
radiation exposure limits set forth  
for an uncontrolled environment  
and meets RSS-102 of the IC radio  
frequency (RF) Exposure rules.  
This equipment should be installed  
and operated keeping the radiator at  
least 20cm or more away from  
person’s body (excluding  
• “PlayStation” is a registered  
trademark of Sony Computer  
Entertainment Inc.  
* Manufacturedunder license  
from Dolby Laboratories.  
Dolby, Pro Logic, and the  
double-D symbol are  
trademarks of Dolby  
Laboratories.  
• Music and video recognition  
technology and related data are  
®
extremities: hands, wrists, feet and  
ankles).  
provided by Gracenote .  
Gracenote is the industry standard  
in music recognition technology  
and related content delivery. For  
more information, please visit  
CD, DVD, Blu-ray Disc, and  
music and video-related data from  
Gracenote, Inc., copyright ©  
2000-present Gracenote.  
Gracenote Software, copyright ©  
2000-present Gracenote. One or  
more patents owned by Gracenote  
apply to this product and service.  
See the Gracenote website for a  
nonexhaustive list of applicable  
Gracenote patents. Gracenote,  
CDDB, MusicID, MediaVOCS,  
the Gracenote logo and logotype,  
and the “Powered by Gracenote”  
logo are either registered  
**Manufacturedunder license  
under U.S. Patent Nos:  
5,956,674; 5,974,380;  
6,226,616; 6,487,535;  
7,212,872; 7,333,929;  
7,392,195; 7,272,567 &  
other U.S. and worldwide  
patents issued & pending.  
DTS-HD, the Symbol, &  
DTS-HD and the Symbol  
together are registered  
trademarks of DTS, Inc.  
Product includes software.  
© DTS, Inc. All Rights  
Reserved.  
Copy Protection  
• Please be advised of the advanced  
content protection systems used in  
both Blu-ray Disc and DVD  
media. These systems, called  
AACS (Advanced Access  
Content System) and CSS  
(Content Scramble System), may  
contain some restrictions on  
playback, analog output, and  
other similar features. The  
operation of this product and the  
restrictions placed may vary  
depending on the date of  
purchase, as the governing board  
of the AACS may adopt or change  
its restriction rules after the time  
of purchase.  
• This system incorporates High-  
Definition Multimedia Interface  
TM  
(HDMI ) technology.  
HDMI, the HDMI logo and High-  
Definition Multimedia Interface  
are trademarks or registered  
trademarks or trademarks of  
Gracenote in the United States  
and/or other countries.  
• Cinavia Notice  
This product uses Cinavia  
technology to limit the use of  
trademarks of HDMI Licensing  
US  
4
®
• DLNA , the DLNA Logo and  
DLNA CERTIFIED are  
trademarks, service marks, or  
certification marks of the Digital  
Living Network Alliance.  
®
®
• Wi-Fi , Wi-Fi Protected Access  
®
• “Made for iPod,” and “Made for  
iPhone” mean that an electronic  
accessory has been designed to  
connect specifically to iPod or  
iPhone, respectively, and has been  
certified by the developer to meet  
Apple performance standards.  
Apple is not responsible for the  
operation of this device or its  
compliance with safety and  
regulatory standards. Please note  
that the use of this accessory with  
iPod or iPhone may affect  
• Opera Browser from Opera  
®
and Wi-Fi Alliance are  
registered marks of the Wi-Fi  
Alliance.  
Software ASA. Copyright 1995-  
2010 Opera Software ASA. All  
rights reserved.  
• Wi-Fi CERTIFIED™, WPA™,  
WPA2™ and Wi-Fi Protected  
Setup™ are marks of the Wi-Fi  
Alliance (BDV-E390/BDV-  
E385/BDV-T39 only).  
• All other trademarks are  
trademarks of their respective  
owners.  
• WPA™, WPA2™ and Wi-Fi  
Protected Setup™ are marks of  
the Wi-Fi Alliance (BDV-E490/  
BDV-E290/BDV-E290/BDV-  
E190 only).  
• Other system and product names  
are generally trademarks or  
registered trademarks of the  
manufacturers. ™ and ® marks  
are not indicated in this document.  
wireless performance.  
• The Wi-Fi CERTIFIED Logo is a  
certification mark of the  
• Windows Media is either a  
registered trademark or trademark  
of Microsoft Corporation in the  
United States and/or other  
Wi-Fi Alliance (BDV-E390/  
BDV-E385/BDV-T39 only).  
• The Wi-Fi Protected Setup Mark  
is a mark of the Wi-Fi Alliance  
(BDV-E390/BDV-E385/BDV-  
T39 only).  
End User License  
Information  
Gracenote® End User  
License Agreement  
This application or device contains  
software from Gracenote, Inc. of  
Emeryville, California  
(“Gracenote”). The software from  
Gracenote (the “Gracenote  
Software”) enables this application  
to perform disc and/or file  
identification and obtain music-  
related information, including  
name, artist, track, and title  
information (“Gracenote Data”)  
from online servers or embedded  
databases (collectively, “Gracenote  
Servers”) and to perform other  
functions. You may use Gracenote  
Data only by means of the intended  
End-User functions of this  
countries.  
This product contains technology  
subject to certain intellectual  
property rights of Microsoft. Use  
or distribution of this technology  
outside of this product is  
• “PhotoTVHD” and the “PhotoTV  
HD” logo are trademarks of Sony  
Corporation.  
prohibitedwithout the appropriate  
license(s) from Microsoft.  
• MPEG Layer-3 audio coding  
technology and patents licensed  
from Fraunhofer IIS and  
®
Content owners use Microsoft  
PlayReady content access  
technology to protect their  
intellectual property, including  
copyrighted content. This device  
uses PlayReady technology to  
access PlayReady-protected  
content and/or WMDRM-  
Thomson.  
• This product incorporates  
proprietary technology under  
license from Verance Corporation  
and is protected by U.S. Patent  
7,369,677 and other U.S. and  
worldwide patents issued and  
pending as well as copyright and  
trade secret protection for certain  
aspects of such technology.  
Cinavia is a trademark of Verance  
Corporation. Copyright 2004-  
2010 Verance Corporation. All  
rights reserved by Verance.  
Reverse engineering or  
disassembly is prohibited.  
• iPhone, iPod, iPod classic, iPod  
nano, and iPod touch are  
trademarks of Apple Inc.,  
registered in the U.S. and other  
countries.  
protected content. If the device  
fails to properly enforce  
restrictions on content usage,  
content owners may require  
Microsoft to revoke the device’s  
ability to consume PlayReady-  
protected content. Revocation  
should not affect unprotected  
content or content protected by  
other content access technologies.  
Content owners may require you  
to upgrade PlayReady to access  
their content. If you decline an  
upgrade, you will not be able to  
access content that requires the  
upgrade.  
application or device.  
You agree that you will use  
Gracenote Data, the Gracenote  
Software, and Gracenote Servers  
for your own personal non-  
commercial use only. You agree  
not to assign, copy, transfer or  
transmit the Gracenote Software or  
any Gracenote Data to any third  
party. YOU AGREE NOT TO USE  
OR EXPLOIT GRACENOTE  
US  
5
DATA, THE GRACENOTE  
SOFTWARE, OR GRACENOTE  
SERVERS, EXCEPT AS  
EXPRESSLY PERMITTED  
HEREIN.  
or categories that Gracenote may  
provide in the future and is free to  
discontinue its services at any time.  
GRACENOTE DISCLAIMS ALL  
WARRANTIES EXPRESS OR  
IMPLIED, INCLUDING, BUT  
NOT LIMITED TO, IMPLIED  
WARRANTIES OF  
About These  
Operating  
Instructions  
You agree that your non-exclusive  
license to use the Gracenote Data,  
the Gracenote Software, and  
• The instructions in these  
Operating Instructions  
describe the controls on the  
remote. You can also use the  
controls on the unit if they  
have the same or similar  
names as those on the remote.  
• In this manual, “disc” is used  
as a general reference for  
BDs, DVDs, Super Audio  
CDs, or CDs unless otherwise  
specified by the text or  
illustrations.  
Gracenote Servers will terminate if  
you violate these restrictions. If  
your license terminates, you agree  
to cease any and all use of the  
Gracenote Data, the Gracenote  
Software, and Gracenote Servers.  
Gracenote reserves all rights in  
Gracenote Data, the Gracenote  
Software, and the Gracenote  
Servers, including all ownership  
rights. Under no circumstances will  
Gracenote become liable for any  
payment to you for any information  
that you provide. You agree that  
Gracenote, Inc. may enforce its  
rights under this Agreement against  
you directly in its own name.  
The Gracenote service uses a  
unique identifier to track queries  
for statistical purposes. The  
MERCHANTABILITY, FITNESS  
FOR A PARTICULAR  
PURPOSE, TITLE, AND NON-  
INFRINGEMENT. GRACENOTE  
DOES NOT WARRANT THE  
RESULTS THAT WILL BE  
OBTAINED BY YOUR USE OF  
THE GRACENOTE SOFTWARE  
OR ANY GRACENOTE  
SERVER. IN NO CASE WILL  
GRACENOTE BE LIABLE FOR  
ANY CONSEQUENTIAL OR  
INCIDENTAL DAMAGES OR  
FOR ANY LOST PROFITS OR  
LOST REVENUES.  
• The instructions in this  
manual are for BDV-E490,  
BDV-E390, BDV-E385,  
BDV-E290, BDV-E190, and  
BDV-T39. BDV-E490 is the  
model used for illustration  
purposes. Any difference in  
operation is clearly indicated  
in the text, for example,  
“BDV-E490 only.”  
© Gracenote, Inc. 2009  
purpose of a randomly assigned  
numeric identifier is to allow the  
Gracenote service to count queries  
without knowing anything about  
who you are. For more information,  
see the web page for the Gracenote  
Privacy Policy for the Gracenote  
service.  
• Some illustrations are  
presented as conceptual  
drawings, and may be  
The Gracenote Software and each  
item of Gracenote Data are licensed  
to you “AS IS.” Gracenote makes  
no representations or warranties,  
express or implied, regarding the  
accuracy of any Gracenote Data  
from in the Gracenote Servers.  
Gracenote reserves the right to  
delete data from the Gracenote  
Servers or to change data categories  
for any cause that Gracenote deems  
sufficient. No warranty is made that  
the Gracenote Software or  
different from the actual  
products.  
• The items displayed on the  
TV screen may vary  
depending on the area.  
• The default setting is  
underlined.  
Gracenote Servers are error-free or  
that functioning of Gracenote  
Software or Gracenote Servers will  
be uninterrupted. Gracenote is not  
obligated to provide you with new  
enhanced or additional data types  
US  
6
 
Table of Contents  
Changing the Brightness of the Front  
Panel Display.................................. 37  
Connecting the other components  
(Set-top box, etc.) ...................19  
Connecting the antenna  
(aerial) .....................................20  
Step 3: Preparing for Network  
Connection.............................. 20  
Step 4: Performing the Easy  
Setup........................................ 22  
Step 6: Enjoying Surround  
Sound....................................... 24  
Selecting the Audio Format, Multilingual  
Tracks, or Channel..........................33  
Enjoying Multiplex Broadcast  
Sound..............................................33  
Using the Control for HDMI Function for  
“BRAVIA” Sync ............................35  
Deactivating the Buttons on  
the Unit ...........................................37  
Controlling Your TV with the Supplied  
Remote............................................37  
US  
7
Unpacking  
BDV-E490  
• Front speakers (2)  
• Speaker-bottom covers (2)  
• Bases (2)  
• Remote commander  
(remote) (1)  
• R6 (size AA) batteries (2)  
• Lower parts of the front  
speakers (2)  
• Dock for iPod/iPhone  
(TDM-iP30) (1)  
• Surround speakers (2)  
• USB cable (1)  
• Video cord (1)  
• Center speaker (1)  
• Screws (8)  
• FM wire antenna (aerial) (1)  
• Operating Instructions  
• Quick Setup Guide  
or  
• Subwoofer (1)  
• Speaker Installation Guide  
US  
8
 
BDV-E390/BDV-E290  
• Front speakers (2)  
• FM wire antenna (aerial) (1) • Operating Instructions  
• Quick Setup Guide  
• Speaker Installation Guide  
or  
• Remote commander  
(remote) (1)  
• Surround speakers (2)  
• R6 (size AA) batteries (2)  
• Center speaker (1)  
• Dock for iPod/iPhone  
(TDM-iP30) (1)  
• USB cable (1)  
• Video cord (1)  
• Subwoofer (1)  
US  
9
BDV-E385  
• Front speakers (2)  
• FM wire antenna (aerial) (1) • Operating Instructions  
• Quick Setup Guide  
• Speaker Installation Guide  
or  
• Remote commander  
(remote) (1)  
• Surround speakers (2)  
• R6 (size AA) batteries (2)  
• Video cord (1)  
• Center speaker (1)  
• Subwoofer (1)  
US  
10  
BDV-E190  
• Front speakers (2)  
• Foot pads (2)  
• Operating Instructions  
• Quick Setup Guide  
• Speaker Installation Guide  
• FM wire antenna (aerial) (1)  
or  
• Surround speakers (2)  
• Center speaker (1)  
• Video cord (1)  
• Remote commander  
(remote) (1)  
• R6 (size AA) batteries (2)  
• Subwoofer (1)  
US  
11  
BDV-T39  
• Front speakers (2)  
• FM wire antenna (aerial) (1) • High Speed HDMI cable (1)  
or  
• Remote commander  
(remote) (1)  
• Surround speakers (2)  
• Operating Instructions  
• Quick Setup Guide  
• Speaker Installation Guide  
• R6 (size AA) batteries (2)  
• Center speaker (1)  
• Dock for iPod/iPhone  
(TDM-iP30) (1)  
• USB cable (1)  
• Video cord (1)  
• Subwoofer (1)  
US  
12  
Index to Parts and Controls  
For more information, refer to the pages indicated in parentheses.  
Front panel  
VOL  
VOL  
FUNCTION  
Slot  
A
"/1 (on/standby)  
D
E
(USB) port (page 26)  
Open the cover using a fingernail in the slot.  
Turns on the unit, or sets it to standby mode.  
(remote sensor)  
B Disc tray (page 25)  
C Play operation buttons  
Z (open/close)  
N (play)  
F Front panel display  
x (stop)  
VOL +/–  
./> (previous/next)  
FUNCTION (page 23)  
Selects the playback source.  
US  
13  
   
Front panel display  
About the indications in the front panel display  
A Lights up when repeat play is  
F Displays the system’s status, such as  
activated.  
radio frequency, etc.  
When you press DISPLAY, the stream  
information/decoding status is displayed  
when the function is set to “TV.”  
The stream information/decoding status  
may not appear depending on the stream or  
item being decoded.  
B Lights up when stereo sound is  
received. (Radio only)  
C Lights up when the system is playing  
via the PARTY STREAMING function.  
D Lights up when muting is on.  
E Lights up when the HDMI (OUT) jack is  
correctly connected to an HDCP (High-  
bandwidth Digital Content Protection)  
compliant device with HDMI or DVI  
(Digital Visual Interface) input.  
Rear panel  
DIGITAL IN  
OPTICAL  
L
OUT  
ARC  
R
FM COAXIAL  
75  
FRONT  
R
FRONT  
L
SUBWOOFER CENTER  
SPEAKERS  
SUR  
R
SUR  
L
LAN (100)  
TV  
VIDEO OUT  
AUDIO IN  
ANTENNA  
A SPEAKERS jacks (page 17)  
E LAN (100) terminal (page 20)  
B TV (DIGITAL IN OPTICAL) jack (page  
F AUDIO (AUDIO IN L/R) jacks (page 19)  
G ANTENNA (FM COAXIAL 75Ω) jack  
C VIDEO OUT jack (page 18)  
D HDMI (OUT) jack (page 18)  
US  
14  
   
TV "/1 (on/standby) (page 37)  
Remote control  
Turns on the TV or sets it to standby mode.  
"/1 (on/standby) (pages 22, 34)  
Turns on the system or sets it to standby  
mode.  
SPEAKERS  
TV  
TV AUDIO  
1
B Number buttons (pages 34, 37)  
Enters the title/chapter numbers, preset  
station number, etc.  
BRAVIA Sync  
DIMMER  
SLEEP  
1
4
2
5
8
3
6
AUDIO (page 33)  
Selects the audio format/track.  
9
FUNCTION  
3D  
2
3
4
7
9
SUBTITLE  
AUDIO  
0
RED  
SUBTITLE  
YELLOW  
BLUE  
GREEN  
Selects the subtitle language when  
multilingual subtitles are recorded on a BD-  
ROM/DVD VIDEO.  
TOP MENU  
POP UP/ MENU  
C Color buttons (yellow/blue/red/green)  
Short cut keys for selecting items on some  
BD menus (can also be used for Java  
interactive operations on BDs).  
RETURN  
OPTIONS  
SOUND MODE  
SOUND MODE  
5
6
HOME  
NETFLIX PRESET PRESET  
SEN  
TUNING  
STOP  
D TOP MENU  
TUNING  
PLAY  
Opens or closes the BD’s or DVD’s Top  
Menu.  
DISPLAY  
PAUSE  
8
POP UP/MENU  
VOL TV VOL  
MUTING  
Opens or closes the BD-ROM’s Pop-up  
Menu, or the DVD’s menu.  
TV INPUT  
7
OPTIONS (pages 24, 30, 38)  
Displays the options menu on the TV screen  
or in the front panel display. (The location  
differs based on the selected function.)  
Number 5, AUDIO, VOL +, and N buttons  
have a tactile dot. Use the tactile dot as a  
reference when operating the remote.  
RETURN  
Returns to the previous display.  
: For TV operations  
C/X/x/c  
Moves the highlight to a displayed item.  
(enter)  
Enters the selected item.  
The system automatically  
returns to standby mode  
If any button on the unit or remote is not pressed  
within 30 minutes, the system automatically  
returns to standby mode.  
E SOUND MODE +/– (page 24)  
Selects the sound mode.  
HOME (pages 22, 34, 35, 38, 40)  
Enters or exits the system’s home menu.  
A
Z (open/close)  
NETFLIX  
SPEAKERS TVyAUDIO  
Accesses the “NETFLIX” online service.  
Selects whether TV sound is output from  
the system’s speakers or the TV’s  
speaker(s). This function works only when  
you set [Control for HDMI] to [On]  
SEN  
Accesses the “Sony Entertainment  
Network™” online service.  
US  
15  
 
F Playback operation buttons  
H DISPLAY (pages 25, 28, 38)  
Displays playback and web browsing  
information on the TV screen.  
./> (previous/next)  
Skip to the previous/next chapter, track, or  
file.  
Displays the preset radio station, frequency,  
etc., in the front panel display.  
I DIMMER  
m/M (fast/slow/freeze frame)  
Fast reverse/fast forward the disc during  
playback. Each time you press the button,  
the search speed changes.  
Sets the brightness of the front panel  
display to either of 2 levels.  
SLEEP (page 36)  
Activates slow-motion play when pressed  
for more than one second in pause mode.  
Plays one frame at a time when pressed in  
pause mode.  
Sets the sleep timer.  
FUNCTION (pages 23, 34)  
Selects the playback source.  
3D  
Converts 2D content into simulated 3D  
content when connected to a 3D compatible  
device.  
• During Blu-ray 3D Disc playback, slow-motion  
reverse play and single-frame reverse play are  
not available.  
N (play)  
Starts or re-starts playback (resume play).  
Activates One-Touch Play (page 35) when  
the system is on and set to the “BD/DVD”  
function.  
X (pause)  
Pauses or re-starts playback.  
x (stop)  
Stops playback and remembers the stop  
point (resume point). The resume point for  
a title/track is the last point you played or  
the last photo for a photo folder.  
Radio operation buttons  
PRESET +/–  
TUNING +/–  
G MUTING  
Turns off the sound temporarily.  
VOL +/– (page 34)  
Adjusts the volume.  
TV VOL +/–  
Adjusts the TV volume.  
TV INPUT  
Switches the TV’s input source between the  
TV and other input sources.  
US  
16  
Step 2: Connecting the  
System  
Do not connect the AC power cord (mains lead)  
of the unit to a wall outlet (mains) until all the  
other connections are made.  
Getting Started  
Step 1: Installing the  
System  
To assemble the speakers, refer to the supplied  
“Speaker Installation Guide.” (BDV-E490 only)  
How to position the system  
Install the system by referring to the illustration  
below.  
• When you connect another component with a volume  
control, turn down the volume of the other  
components to a level where sound is not distorted.  
A
B
F
C
G
Connecting the speakers  
Connect the speaker cords to match the color of  
the SPEAKERS jacks of the unit.  
When connecting to the unit, insert the  
connector until it clicks.  
D
E
Purple  
(Subwoofer)  
A Front speaker (L (left))  
B Front speaker (R (right))  
C Center speaker  
D Surround speaker (L (left))  
E Surround speaker (R (right))  
F Subwoofer  
Green  
(Center speaker)  
White  
(Front left  
speaker (L))  
Red  
(Front right  
speaker (R))  
G Unit  
• Use caution when placing the speakers and/or  
speaker stands attached to the speakers on a specially  
treated (waxed, oiled, polished, etc.) floor, as staining  
or discoloration may result.  
FRONT  
R
FRONT  
L
SUBWOOFER CENTER  
S
R
S
L
SPEAKERS  
• Do not lean or hang on a speaker, as it may fall down.  
Gray  
(Surround right  
speaker (R))  
• You can install the speakers on a wall. For details,  
refer to the supplied “Speaker Installation Guide.”  
Blue  
(Surround left  
speaker (L))  
US  
17  
         
Connecting the TV  
Select one of the following connection methods according to the input jacks on your TV.  
B A  
DIGITAL IN  
OPTICAL  
L
OUT  
ARC  
R
FM COAXIAL  
75  
FRONT  
R
FRONT  
L
SUBWOOFER CENTER  
SPEAKERS  
SUR  
R
SUR  
L
LAN (100)  
TV  
VIDEO OUT  
AUDIO IN  
ANTENNA  
C
D
Video connections  
A
High quality  
HDMI cable1)  
OUT  
ARC  
(supplied with BDV-T39 only)  
2)  
or  
B
Video cord  
(supplied with BDV-E385/  
BDV-E190 only3))  
VIDEO OUT  
Standard  
quality  
1) High Speed HDMI cable  
2) If the HDMI IN jack of your TV is compatible with the ARC (Audio Return Channel) function, an HDMI cable  
connection can also send a digital audio signal from the TV. For setting the Audio Return Channel function, see  
[Audio Return Channel] (page 44).  
3) The supplied video cord is for connection of the Dock for iPod/iPhone. (BDV-E490/BDV-E390/BDV-E290/BDV-  
T39 only)  
Audio connections  
If you do not connect the system to the TV’s HDMI jack that is compatible with the ARC function,  
make an appropriate audio connection for listening to TV sound via the system’s speakers.  
C
D
High quality  
DIGITAL IN  
OPTICAL  
Digital optical cord (not supplied)  
Audio cable (not supplied)  
DIGITAL OUT  
OPTICAL  
TV  
L
L
AUDIO  
OUTPUT  
R
R
AUDIO IN  
Standard  
quality  
US  
18  
   
Connecting the other components (Set-top box, etc.)  
Connect the system so that video signals from the system and other component are sent to the TV, and  
audio signals from the component are sent to the system as follows.  
TV  
Video out  
Component  
(Set-top box, VCR, PlayStation®, or  
digital satellite receiver, etc.)  
Audio out  
Signal flow  
System  
: Video signal  
: Audio signal  
Select one of the following connection methods according to the jack type of the component.  
DIGITAL IN  
OPTICAL  
L
OUT  
ARC  
R
FM COAXIAL  
75  
FRONT  
R
FRONT  
L
SUBWOOFER CENTER  
SPEAKERS  
SUR  
R
SUR  
L
LAN (100)  
TV  
VIDEO OUT  
AUDIO IN  
ANTENNA  
A
B
A
B
High quality  
DIGITAL IN  
OPTICAL  
Digital optical cord (not supplied)  
DIGITAL OUT  
OPTICAL  
TV  
L
Audio cable (not supplied)  
L
AUDIO  
OUTPUT  
R
R
AUDIO IN  
Standard  
quality  
• If you make either connection above, set [Control for HDMI] in [HDMI Settings] of [System Settings] to [Off]  
• You can enjoy component sound by selecting the “AUDIO” function for connection B.  
US  
19  
   
Connecting the antenna  
(aerial)  
Step 3: Preparing for  
Network Connection  
Rear panel of the unit  
• To connect the system to your network, perform  
[Easy Network Settings]. For details, see “Step 4:  
L
OUT  
ARC  
R
FM COAXIA
75  
LAN (100)  
VIDEO OUT  
AUDIO IN  
ANTENA  
For BDV-E390/BDV-E385/BDV-T39  
Select the method based on your LAN (Local  
Area Network) environment.  
or  
• If you use a wireless LAN  
The system has built-in Wi-Fi, and you can  
connect the system to the network by making  
the network settings.  
FM wire antenna (aerial)  
(supplied)  
• If you use other than a wireless LAN  
Connect to the network by making a LAN  
cable connection as follows.  
• Be sure to fully extend the FM wire antenna (aerial).  
• After connecting the FM wire antenna (aerial), keep  
it as horizontal as possible.  
Rear panel of the unit  
DIGITAL IN  
OPTICAL  
L
OUT  
ARC  
R
FM COAXIAL  
75  
LAN 100)  
TV  
VIDEO OUT  
AUDIO IN  
ANTENNA  
• If you have poor FM reception, use a 75-ohm coaxial  
cable (not supplied) to connect the unit to an outdoor  
FM antenna (aerial).  
Broadband router  
LAN  
LAN cable (not supplied)  
US  
20  
       
For BDV-E490/BDV-E290/BDV-  
E190  
Before performing the network  
settings  
Select the method based on your LAN (Local  
Area Network) environment.  
When your wireless LAN router (access point)  
is Wi-Fi Protected Setup (WPS)-compatible,  
you can easily set the network settings with the  
WPS button.  
Front panel of the unit  
If not, check the following information in  
advance, and record it in the space provided  
below.  
FUNCTION  
• The network name (SSID*) that identifies  
your network**.  
1
Broadband  
router  
2
• If security is set on your wireless network, the  
security key (WEP key, WPA key)**.  
LAN  
*
SSID (Service Set Identifier) is a name that identifies a  
particular wireless network.  
**You need to check the settings of your wireless  
LAN router to get the information about SSID and  
security key. For details:  
USB Wireless LAN  
Adapter  
– visit the following website:  
LAN cable  
(not supplied)  
(not supplied)  
– refer to the instruction manual supplied with the  
wireless LAN router  
– consult the manufacturer of the wireless LAN  
router  
DIGITAL IN  
OPTICAL  
L
OUT  
ARC  
R
FM COAXIAL  
75  
LAN (100)  
TV  
VIDEO OUT  
AUDIO IN  
ANTENNA  
About wireless LAN security  
Since communication via the wireless LAN  
function is established by radio waves, the  
wireless signal may be susceptible to  
interception. To protect wireless  
communication, this system supports various  
security functions. Be sure to correctly  
configure the security settings in accordance  
with your network environment.  
Rear panel of the unit  
1 Wired Setup  
Use a LAN cable to connect to the LAN (100)  
terminal on the unit.  
• A shielded interface cable (LAN cable), straight or  
crossover, is recommended.  
x No Security  
2 USB Wireless Setup  
Although you can easily make settings, anyone  
can intercept wireless communication or intrude  
into your wireless network, even without any  
sophisticated tools. Keep in mind that there is a  
risk of unauthorized access or interception of  
data.  
Use a wireless LAN via the USB Wireless LAN  
Adapter (Sony UWA-BR100* only).  
The USB Wireless LAN Adapter may not be  
available in some regions/countries.  
* As of November 2011.  
x WEP  
Turn the unit off before connecting the  
WEP applies security to communications to  
prevent outsiders from intercepting  
communications or intruding into your wireless  
network. WEP is a legacy security technology  
that enables older devices which do not support  
TKIP/AES to be connected.  
extension cable or inserting the USB Wireless  
LAN Adapter. After inserting the USB Wireless  
LAN Adapter to the base and connecting the  
extension cable to the  
unit on again.  
(USB) port, turn the  
US  
21  
 
x WPA-PSK (TKIP), WPA2-PSK (TKIP)  
TKIP is a security technology developed in  
response to the deficiencies of WEP. TKIP  
assures a higher security level than WEP.  
Step 4: Performing the  
Easy Setup  
x WPA-PSK (AES), WPA2-PSK (AES)  
AES is a security technology that uses an  
advanced security method distinct from WEP  
and TKIP.  
Before performing Step 4  
Make sure all connections are secure, and then  
connect the AC power cord (mains lead).  
AES assures a higher security level than WEP or  
TKIP.  
Follow the Steps below to make the basic  
adjustments and network settings for the system.  
Displayed items vary depending on the country  
model.  
1
Insert two R6 (size AA) batteries  
(supplied) by matching the 3 and #  
ends on the batteries to the markings  
inside the compartment.  
2
3
4
Turn on the TV.  
Press [/1.  
Switch the input selector on your TV so  
that the signal from the system  
appears on the TV screen.  
The Easy Setup Display for OSD language  
selection appears.  
US  
22  
             
5
Perform [Easy Initial Settings]. Follow  
the on-screen instructions to make the  
Step 5: Selecting the  
Source  
basic settings using C/X/x/c and  
.
You can select the playback source.  
C/X/x/c  
Press FUNCTION repeatedly until the  
desired function appears in the front panel  
display.  
Depending on the connection method  
(page 18), perform the following setting.  
• HDMI cable connection: Follow the  
instructions that are displayed on the TV  
screen.  
When you press FUNCTION once, the current  
function appears in the front panel display, then  
each time you press FUNCTION, the function  
changes as follows.  
• Video cord connection: Select [16:9] or  
[4:3] so that the picture is displayed  
correctly.  
“BD/DVD” t “USB” t “FM” t “TV” t  
“AUDIO” t “BD/DVD” t …  
Function  
Source  
6
7
After completing of [Easy Initial  
Settings], perform [Easy Network  
Settings]. Press C/X/x/c to select [Easy  
“BD/DVD”  
Disc or network device to be  
played by the system  
Network Settings], then press  
.
“USB”  
USB device or iPod/iPhone that is  
connected to the  
(USB) port  
The Easy Network Settings display  
appears.  
“FM”  
“TV”  
FM radio (page 34)  
Follow the on-screen instructions to  
make the network settings using C/X/x/  
Component (TV, etc.) that is  
connected to the TV (DIGITAL  
IN OPTICAL) jack on the rear  
panel, or a TV compatible with the  
Audio Return Channel function  
that is connected to the HDMI  
(OUT) jack on the rear panel  
c and  
.
If the system cannot connect to the network,  
To recall the Easy Initial Settings  
display/Easy Network Settings  
display  
“AUDIO”  
Component that is connected to  
the AUDIO (AUDIO IN L/R)  
jacks on the rear panel (page 19)  
1
Press HOME.  
The home menu appears on the TV screen.  
Some functions may be changed via the TV screen by  
pressing FUNCTION, X/x, and  
2
3
Press C/c to select  
Press X/x to select [Easy Setup], then  
press  
Press X/x to select the setting, then  
press  
[Setup].  
.
.
4
.
• [Easy Initial Settings]  
• [Easy Network Settings]  
The Easy Initial Settings display/Easy  
Network Settings display appears.  
US  
23  
   
Sound mode  
Effect  
Step 6: Enjoying  
Surround Sound  
After performing the previous Steps and starting  
playback, you can easily enjoy pre-programmed  
sound modes that are tailored to different kinds  
of sound sources. They bring the exciting and  
powerful sound of movie theaters into your  
home.  
[Sports]  
(“SPORTS”)  
The system provides optimized  
sound for watching sports  
programs.  
[Night]  
(“NIGHT”)  
Suitable for watching movies at  
night by reducing loud sounds  
while maintaining clear dialog.  
[2ch Stereo]  
(“2CH ST.”)  
The system outputs the sound  
from the front speakers and  
subwoofer regardless of sound  
format or number of channels.  
[Demo Sound]  
The system provides ear-catching  
(“DEMO SND”) sound, suitable for presentations,  
etc.  
Selecting the sound mode  
To select the sound mode from  
the option menu  
Press SOUND MODE +/– repeatedly during  
playback until the desired mode appears in  
the front panel display or on the TV screen.  
1
2
Press OPTIONS and X/x to select  
[Sound Mode], then press  
You can select the following items. The text  
enclosed in brackets ([--]) appears on the TV  
screen, and the text enclosed in double quotation  
mark (“--”) appears in the front panel display.  
.
Press X/x to select the sound mode,  
then press  
.
• The sound mode can be selected only when [Sound  
Effect] is set to [Sound Mode On] (page 42). When  
[Sound Effect] is set to other than [Sound Mode On],  
the sound mode setting does not apply.  
Sound mode  
Effect  
[Auto]  
(“AUTO”)  
The system selects [Movie] or  
[Music] automatically to produce  
the sound effect depending on the  
disc or sound stream.  
• To enjoy 2-channel source such as a CD in multi-  
channel output, select [Auto] or [Sports].  
• 2-channel source: The system  
simulates surround sound from  
2-channel sources and outputs  
sound from the 5.1 channel  
speakers by duplicating  
2-channel source sound across  
each speaker.  
• Multi-channel source: The  
system outputs sound from the  
speakers depending on the  
number of channels of the  
source.  
[Movie]  
(“MOVIE”)  
The system provides the  
optimized sound for watching  
movies.  
[Music]  
(“MUSIC”)  
The system provides the  
optimized sound for listening to  
music.  
[Audio Enhancer] The system optimizes 2-channel  
(“ENHANCER”) sources by enhancing sound lost  
by audio compression.  
US  
24  
   
3
Insert a BD-ROM with BONUSVIEW/  
BD-LIVE.  
Playback  
The operation method differs depending on  
the disc. Refer to the operating instructions  
of the disc.  
Playing a Disc  
For playable discs, see “Playable Discs”  
• To delete data in the USB memory, select [Erase BD  
Data] in [Video], and press . All data stored in  
the buda folder will be deleted.  
1
2
Switch the input selector on your TV so  
that the signal from the system  
appears on your TV screen.  
Enjoying Blu-ray 3D  
Press Z, and place a disc on the disc  
tray.  
You can enjoy Blu-ray 3D Discs with the 3D  
logo*.  
*
1
Prepare for Blu-ray 3D Disc playback.  
• Connect the system to your 3D-  
compatible TV using a High Speed HDMI  
cable (supplied with BDV-T39 only).  
• Set [3D Output Setting] and [TV Screen  
Size Setting for 3D] in [Screen Settings]  
3
Press Z to close the disc tray.  
Playback starts.  
2
Insert a Blu-ray 3D Disc.  
The operation method differs depending on  
the disc. Refer to the operating instructions  
supplied with the disc.  
If playback does not start automatically,  
select  
in the  
[Video],  
[Music], or  
.
[Photo] category, and press  
• Refer also to the operating instructions of your 3D-  
compatible TV.  
Enjoying BONUSVIEW/BD-LIVE  
Some BD-ROMs with “BD-LIVE Logo*” have  
bonus content and other data that can be  
downloaded for enjoyment.  
*
1
2
Connect the USB device to the  
(USB) port (page 13).  
For local storage, use a 1 GB or larger USB  
memory.  
Prepare for BD-LIVE (BD-LIVE only).  
• Connect the system to a network  
• Set [BD Internet Connection] to [Allow]  
US  
25  
           
Displaying the playback  
information  
Playing from a USB  
Device  
You can play video/music/photo files on a  
connected USB device.  
You can check the playback information, etc.,  
by pressing DISPLAY.  
The displayed information differs depending on  
the disc type and system status.  
For playable types of files, see “Playable Types  
Example: when playing a BD-ROM  
1
Connect the USB device to the  
Refer to the operating instructions of the  
USB device before connecting.  
2
Press HOME.  
The home menu appears on the TV screen.  
3
4
Press C/c to select  
[Video],  
[Music], or  
[Photo].  
Press X/x to select  
[USB device],  
then press  
.
• Do not remove the USB device during  
operation. To avoid data corruption or damage  
to the USB device, turn the system off before  
connecting or removing the USB device.  
A
B
C
D
Output resolution/Video frequency  
Title number or name  
The currently selected audio setting  
Available functions (  
subtitle)  
angle,  
audio,  
E
Playback information  
Enjoying an iPod/iPhone  
(BDV-E490/BDV-E390/BDV-E385/BDV-  
E290/BDV-T39 only)  
Displays play mode, playing status bar, disc  
type, video codec, bit rate, repeat type, elapsed  
time, total playing time  
F
G
Chapter number  
You can enjoy the music/video*/photo* and  
charge the battery of an iPod/iPhone via the  
system.  
The currently selected angle  
* BDV-E490/BDV-E390/BDV-E290/BDV-T39  
only.  
Compatible iPod/iPhone models  
Update your iPod/iPhone with the latest  
software before using with the system.  
Made for iPod touch 4th generation, iPod touch  
3rd generation, iPod touch 2nd generation, iPod  
nano 6th generation, iPod nano 5th generation  
(video camera), iPod nano 4th generation  
(video), iPod nano 3rd generation (video), iPod  
classic, iPhone 4S, iPhone 4, iPhone 3GS,  
iPhone 3G  
US  
26  
       
4
Press X/x to select [iPod], then  
press  
To enjoy an iPod/iPhone via the  
system  
.
x If you selected [Video]* or [Music] in  
Step 3  
The video/music files are listed on the TV  
screen. Go to the next Step.  
1
(For BDV-E490/BDV-E390/BDV-E290/  
BDV-T39)  
Connect the Dock for iPod/iPhone to  
the  
(USB) port (page 13), then place  
the iPod/iPhone onto the Dock for iPod/  
iPhone.  
x If you selected [Photo] in Step 3*  
[Please change the TV input to the video  
input...] appears on the TV screen. Switch  
the input selector on your TV so that the  
signal from the iPod/iPhone appears on  
your TV screen. Then, start the slideshow  
by operating the iPod/iPhone directly.  
When you play a video/photo file, connect  
the video out jack of the Dock for iPod/  
iPhone to the video input jack of your TV  
with a video cord before placing the iPod/  
iPhone onto the Dock for iPod/iPhone.  
* BDV-E490/BDV-E390/BDV-E290/BDV-T39  
only.  
TV  
(USB) port of the unit  
5
Press C/X/x/c and  
that you want to play.  
to select the file  
The sound from the iPod/iPhone is played  
on the system.  
VIDEO IN  
When you play a video file, switch the input  
selector on your TV so that the signal from  
the iPod/iPhone appears on your TV screen.  
(BDV-E490/BDV-E390/BDV-E290/BDV-  
T39 only.)  
USB cable (supplied)  
Dock for iPod/iPhone (supplied)  
You can operate the iPod/iPhone using the  
buttons on the supplied remote.  
USB  
DE  
For operation details, refer to the operating  
instructions of the iPod/iPhone.  
• To change a system setting, such as the sound mode  
setting, while viewing images from your iPod/iPhone  
on your TV, select the input on your TV for this  
system before operating the system. (BDV-E490/  
BDV-E390/BDV-E290/BDV-T39 only.)  
• The iPod/iPhone is charged when connected to the  
system while the system is turned on.  
Video cord (supplied)  
(For other models)  
Connect the iPod/iPhone to the  
(USB) port (page 13) with the iPod/  
iPhone’s USB cable.  
• Sony cannot accept responsibility in the event that  
data recorded to iPod/iPhone is lost or damaged when  
using an iPod/iPhone connected to this unit.  
• Do not remove the iPod/iPhone during operation. To  
avoid data corruption or damage to the iPod/iPhone,  
turn the system off when connecting or removing the  
iPod/iPhone.  
2
3
Press HOME.  
The home menu appears on the TV screen.  
Press C/c to select  
[Video]*,  
[Music], or [Photo]*.  
* BDV-E490/BDV-E390/BDV-E290/BDV-T39  
only.  
• The System Audio Control function does not work  
while playing video/photo files via the iPod/iPhone  
(BDV-E490/BDV-E390/BDV-E290/BDV-T39  
only).  
• The system can recognize up to 5,000 files (including  
folders).  
US  
27  
C Network condition indicator  
Indicates signal strength for a wireless  
connection.  
Indicates a wired connection.  
Playing via a Network  
D
E
F
Network transmission speed  
The next video file name  
Enjoying Sony Entertainment  
Network (SEN)  
The currently selected video file name  
Sony Entertainment Network serves as a  
gateway delivering selected Internet content and  
a variety of on-demand entertainment straight to  
your unit.  
Playing files on a Home  
Network (DLNA)  
You can play video/music/photo files on other  
DLNA-certified components by connecting  
them to your home network.  
• For customers in the U.S. and Canada:  
Some Internet content requires registration via a PC  
before it can be played. For further details, visit the  
following website:  
This unit can be used as a player and renderer.  
• Server: Stores and sends files  
• Player: Receives and plays files from the  
server  
• Some Internet content may not be available in some  
regions/countries.  
• Renderer: Receives and plays files from the  
server, and can be operated by another  
component (controller)  
1
Prepare for Sony Entertainment  
Network.  
Connect the system to a network (page 20).  
• Controller: Operates the renderer component  
2
3
Press SEN.  
Server  
Press C/X/x/c to select the Internet  
content and a variety of on-demand  
entertainment, then press  
.
Video streaming control panel  
The control panel appears when a video file  
starts playing. The displayed items may differ  
depending on the Internet content provider.  
To display again, press DISPLAY.  
Player  
Player  
(This system)  
Prepare for using the DLNA function.  
• Connect the system to a network (page 20).  
• Prepare other DLNA-certified components.  
For details, see the operating instructions of  
the components.  
A
B
Control display  
Press C/X/x/c or  
for playback operations.  
Playing status bar  
Status bar, cursor indicating the current  
position, playing time, duration of the video  
file  
US  
28  
     
To play files stored on a DLNA  
server via the system (DLNA  
Player)  
Playing the same music in  
different rooms (PARTY  
STREAMING)  
Select the DLNA server icon from  
[Video],  
[Music], or  
[Photo] in the home menu,  
then select the file that you want to play.  
You can play the same music at the same time  
across all Sony components which are  
Server  
compatible with the PARTY STREAMING  
function and connected to your home network.  
Contents in  
[Music] and the “FM” and  
“AUDIO” functions can be used with the  
PARTY STREAMING function.  
There are two kinds of PARTY STREAMING-  
compatible components.  
• PARTY host: Plays and sends music.  
• PARTY guest: Plays music that is sent from  
PARTY host.  
Player  
(This system)  
To play remote files by operating  
the system (Renderer) via a DLNA  
controller  
You can operate the system with a DLNA-  
certified controller, such as iPhone, when  
playing files stored on a DLNA server.  
This unit can be used as a PARTY host or  
PARTY guest.  
PARTY host  
(This system)  
Server  
PARTY guest  
PARTY guest  
Renderer  
Controller  
(This system)  
Prepare for PARTY STREAMING.  
Control this system using a DLNA controller.  
For details of operation, see the operating  
instructions of the DLNA controller.  
• Connect the system to a network (page 20).  
• Connect components which are compatible  
with the PARTY STREAMING function.  
To use the system as the PARTY  
host  
• Do not operate the system with the supplied remote  
and a DLNA controller at the same time.  
• For details about the DLNA controller, refer to the  
operating instructions of the DLNA controller.  
Select a track in  
[Music], a radio station in  
[Radio], or  
[AUDIO] in [Input],  
press OPTIONS, then select [Start PARTY]  
from the options menu to start.  
To close, press OPTIONS, then select [Close  
PARTY] from the options menu.  
• The system is compatible with the “Play To” function  
of Windows Media Player 12 that comes standard  
with Windows 7.  
®
US  
29  
A
B
Content details  
Displays a list of related information, such as  
title, cast, track, or artist.  
• If content that is not compatible with the PARTY  
STREAMING function is played, the system closes  
PARTY automatically.  
[Playback History]  
Displays a list of previously played BD-ROM/  
DVD-ROM/CD-DA (music CD) titles. Select  
a title to acquire content information.  
To use the system as a PARTY  
guest  
Select  
[PARTY] in  
[Music], then select  
C
[Search History]  
the PARTY host device icon.  
To leave the PARTY, press OPTIONS, then  
select [Leave PARTY].  
Displays a list of previous searches performed  
via the [Video Search] or [Music Search]  
function.  
To close the PARTY, press OPTIONS, then  
select [Close PARTY].  
To search for further related  
information  
Select an item in the lists, then select the service  
for searches.  
• The sale and product lineup of products that are  
compatible with the PARTY STREAMING function  
differ depending on the area.  
Searching for video/music  
information  
Available Options  
Various settings and playback operations are  
available by pressing OPTIONS. The available  
items differ depending on the situation.  
You can acquire content information using  
Gracenote technology and search for related  
information.  
Common options  
1
2
Connect the system to a network  
Item  
Details  
Insert a disc with content about which  
you want to search.  
[Sound Mode]  
Changes the sound mode  
setting (page 24).  
You can perform a video search from a BD-  
ROM or DVD-ROM, and a music search  
from a CD-DA (music CD).  
[Shuffle Setting]  
(iPod/iPhone only)  
(BDV-E490/BDV-  
E390/BDV-E385/  
BDV-E290/BDV-T39  
only)  
Sets shuffle playback.  
3
4
Press C/c to select  
[Video] or  
[Music].  
[Repeat Setting]  
[3D Menu]  
Sets repeat playback.  
Press X/x to select  
[Video Search]  
or  
[Music Search].  
[Simulated 3D]: Adjusts the  
simulated 3D effect.  
[3D Depth Adjustment]:  
Adjusts the depth of 3D  
images.  
The content information is displayed.  
[2D Playback]: Sets playback  
to 2D image.  
[Play/Stop]  
Starts or stops playback.  
[Play from beginning] Plays the item from the  
beginning.  
[Start PARTY]  
Starts a party with the  
selected source.  
This item may not appear  
depending on the source.  
US  
30  
   
Item  
Details  
Item  
Details  
[Leave PARTY]  
Leaves from a party which  
the system is participating in.  
The PARTY STREAMING  
function continues among  
other participating devices.  
[Subtitle]  
Selects the subtitle language  
when multilingual subtitles  
are recorded on a BD-ROM/  
DVD VIDEO.  
[Angle]  
Switches to other viewing  
angles when multi-angles are  
recorded on BD-ROMs/DVD  
VIDEOs.  
[Close PARTY]  
For PARTY host: Closes a  
party.  
For PARTY guest: Closes a  
party which the system is  
participating in. The PARTY  
STREAMING function ends  
for all other participating  
devices.  
[IP Content Noise  
Reduction]  
Adjusts the video quality for  
Internet content.  
[Video Search]  
Displays information on the  
BD-ROM/DVD-ROM based  
on Gracenote technology.  
[Video] only  
[Music] only  
Item  
Details  
Item  
Details  
[A/V SYNC]  
Adjusts the gap between  
picture and sound. For  
[Add Slideshow  
BGM]  
Registers music files in the  
USB memory as slideshow  
background music (BGM).  
[Music Search]  
Displays information on the  
audio CD (CD-DA) based on  
Gracenote technology.  
[3D Output Setting] Sets whether or not to output  
3D video automatically.  
[Video Settings]  
• [Picture Quality Mode]:  
Selects the picture settings  
for different lighting  
environments.  
[Photo] only  
Item  
Details  
[Slideshow]  
Starts a slideshow.  
Changes the slideshow speed.  
• [BNR]: Reduces the  
mosaic-like block noise in  
the picture.  
[Slideshow Speed]  
[Slideshow Effect]  
Sets the effect when playing a  
slideshow.  
• [MNR]: Reduces minor  
noise around the picture  
outlines (mosquito noise).  
[Slideshow BGM]  
• [Off]: Turns off the  
function.  
[Pause]  
Pauses playback.  
• [My Music from USB]: Sets  
the music files registered in  
[Add Slideshow BGM].  
• [Play from Music CD]: Sets  
the tracks on CD-DAs  
(music CDs).  
[Top Menu]  
Displays the BD’s or DVD’s  
Top Menu.  
[Menu/Popup Menu] Displays the BD-ROM’s  
Pop-up Menu or DVD’s  
menu.  
[Change Display]  
[Rotate Left]  
Switches between [Grid  
View] and [List View].  
[Title Search]  
Searches for a title on BD-  
ROMs/DVD VIDEOs and  
starts playback from the  
beginning.  
Rotates the photo  
counterclockwise by  
90 degrees.  
[Chapter Search]  
[Audio]  
Searches for a chapter and  
starts playback from the  
beginning.  
[Rotate Right]  
[View Image]  
Rotates the photo clockwise  
by 90 degrees.  
Selects the audio format/  
track.  
Displays the selected picture.  
US  
31  
   
Adjusting the delay between  
the picture and sound  
(A/V SYNC)  
When the sound does not match the pictures on  
the TV screen, you can adjust the delay between  
the picture and sound.  
The setting method differs depending on the  
function.  
When playing via other than the  
“FM” or “TV” function  
1
Press OPTIONS.  
The option menu appears on the TV screen.  
2
3
Press X/x to select [A/V SYNC], then  
press  
.
Press C/c to adjust the delay between  
the picture and sound.  
You can adjust from 0 ms to 300 ms in 25  
ms increments.  
4
Press  
.
The setting is made.  
When playing via the “TV”  
function  
1
Press OPTIONS.  
The option menu appears in the front panel  
display.  
2
3
Press X/x repeatedly until “A/V SYNC”  
appears in the front panel display, then  
press  
or c.  
Press X/x to adjust the delay between  
the picture and sound.  
You can adjust from 0 ms to 300 ms in 25  
ms increments.  
4
5
Press  
.
The setting is made.  
Press OPTIONS.  
The option menu in the front panel display  
turns off.  
US  
32  
   
x CD  
• [ Stereo]: The standard stereo sound.  
• [ 1/L]: The sound of the left channel  
(monaural).  
Sound Adjustment  
Selecting the Audio  
Format, Multilingual  
Tracks, or Channel  
• [ 2/R]: The sound of the right channel  
(monaural).  
• [ L+R]: The sound of both the left and right  
channels output from each individual speaker.  
When the system is playing a BD/DVD VIDEO  
recorded in multiple audio formats (PCM,  
Dolby Digital, MPEG audio, or DTS) or  
multilingual tracks, you can change the audio  
format or language.  
With a CD, you can select the sound from the  
right or left channel and listen to the sound of the  
selected channel through both the right and left  
speakers.  
Enjoying Multiplex  
Broadcast Sound  
(DUAL MONO)  
You can enjoy multiplex broadcast sound when  
the system receives or plays a Dolby Digital  
multiplex broadcast signal.  
Press AUDIO repeatedly during playback to  
select the desired audio signal.  
• To receive a Dolby Digital signal, you need to  
connect a TV or other component to the TV  
(DIGITAL IN OPTICAL) jack with a digital optical  
cord (pages 18, 19). If your TV’s HDMI IN jack is  
compatible with the Audio Return Channel function  
(pages 18,44), you can receive a Dolby Digital signal  
via an HDMI cable.  
The audio information appears on the TV  
screen.  
x BD/DVD VIDEO  
Depending on the BD/DVD VIDEO, the choice  
of language varies.  
When 4 digits are displayed, they indicate a  
(page 57) to confirm which language the code  
represents. When the same language is  
displayed two or more times, the BD/DVD  
VIDEO is recorded in multiple audio formats.  
Press AUDIO repeatedly until the desired  
signal appears in the front panel display.  
• “MAIN”: Sound of the main language will be  
output.  
• “SUB”: Sound of the sub language will be  
output.  
x DVD-VR  
• “MAIN/SUB”: Mixed sound of both the main  
and sub languages will be output.  
The types of sound tracks recorded on a disc are  
displayed.  
Example:  
• [ Stereo]  
• [ Stereo (Audio1)]  
• [ Stereo (Audio2)]  
• [ Main]  
• [ Sub]  
• [ Main/Sub]  
• [ Stereo (Audio1)] and [ Stereo (Audio2)] do not  
appear when only one audio stream is recorded on the  
disc.  
US  
33  
             
Presetting radio stations  
Tuner  
You can preset up to 20 stations. Before tuning,  
make sure to turn down the volume to minimum.  
Listening to the Radio  
1
2
Press FUNCTION repeatedly until “FM”  
appears in the front panel display.  
1
2
Press FUNCTION repeatedly until “FM”  
appears in the front panel display.  
Press and hold TUNING +/– until the  
auto scanning starts.  
Select the radio station.  
Scanning stops when the system tunes in a  
station.  
Automatic tuning  
Press and hold TUNING +/– until the auto  
scanning starts.  
3
Press OPTIONS.  
The option menu appears on the TV screen.  
[Auto Tuning] appears on the TV screen.  
Scanning stops when the system tunes in a  
station.  
4
5
6
Press X/x to select [Preset Memory],  
then press  
Press X/x to select the preset number  
you want, then press  
.
To cancel automatic tuning, press any  
buttons other than VOL +/–.  
.
Manual tuning  
Repeat Steps 2 to 5 to store other  
stations.  
Press TUNING +/– repeatedly.  
To change a preset number  
3
Adjust the volume by pressing  
VOL +/–.  
Select the desired preset number by pressing  
PRESET +/–, then perform the procedure from  
Step 3.  
If an FM program is noisy  
If an FM program is noisy, you can select  
monaural reception. There will be no stereo  
effect, but reception will improve.  
Selecting a preset station  
1
Press OPTIONS.  
1
Press FUNCTION repeatedly until “FM”  
appears in the front panel display.  
The option menu appears on the TV screen.  
2
3
Press X/x to select [FM Mode], then  
The last received station is tuned in.  
press  
.
2
Press PRESET +/– repeatedly to select  
the preset station.  
Press X/x to select [Monaural].  
• [Stereo]: Stereo reception.  
The preset number and frequency appear on  
the TV screen and front panel display.  
Each time you press the button, the system  
tunes in one preset station.  
• [Monaural]: Monaural reception.  
4
Press  
.
The setting is made.  
• You can select the preset station number directly  
by pressing the number buttons.  
• You can set [FM Mode] to each preset station  
separately.  
• Each time you press DISPLAY, the display in  
the front panel display changes as follows:  
Frequency t Preset number t Decoding  
status* t Frequency t …  
To turn off the radio  
Press "/1.  
*Appears when [Sound Effect] is set to [Dolby  
Pro Logic], [DTS Neo:6 Cinema], or [DTS  
Neo:6 Music] (page 42).  
US  
34  
         
can change the speakers to which TV sound is  
output by pressing  
SPEAKERS TVyAUDIO.  
Other Operations  
• When sound from the TV or other components  
is output via the speakers of the system, you  
can adjust the volume and turn off the sound of  
the system by operating the TV.  
Using the Control for  
HDMI Function for  
“BRAVIA” Sync  
This function is available on TVs with the  
“BRAVIA” Sync function.  
By connecting Sony components that are  
compatible with the Control for HDMI function  
via an HDMI cable, operation is simplified.  
Audio Return Channel  
You can enjoy TV sound via the system by using  
just one HDMI cable. For details of the setting,  
Language Follow  
When you change the language for the on-screen  
display of the TV, the system’s on-screen  
display language is also changed after turning  
the system off and on.  
• To use the “BRAVIA” Sync function, turn on the  
system and all components that are connected to the  
system after connecting them with an HDMI cable.  
Control for HDMI - Easy Setting  
You can set the system’s [Control for HDMI]  
function automatically by enabling the  
corresponding setting on the TV.  
For details about the Control for HDMI  
Setting the Speakers  
[Speaker Settings]  
To obtain the best possible surround sound, set  
the speakers’ distance from your listening  
position. Then use the test tone to adjust the  
balance of the speakers.  
System Power Off  
You can turn the system off in sync with the TV.  
1
Press HOME.  
The home menu appears on the TV screen.  
• The system does not turn off automatically while  
playing music or when set to the “FM” function.  
2
3
Press C/c to select  
Press X/x to select [Audio Settings],  
then press  
Press X/x to select [Speaker Settings],  
then press  
[Setup].  
One-Touch Play  
.
When you press N on the remote, the system  
and your TV turn on, and your TV’s input is set  
to the HDMI input to which the system is  
connected.  
4
.
The [Speaker Settings] display appears.  
5
Press X/x to select the item, then press  
System Audio Control  
You can simplify operation to enjoy sound from  
.
Check the following settings.  
the TV or other components.  
You can use the System Audio Control function  
as follows:  
x [Distance]  
When you move the speakers, be sure to set the  
parameters of the distance from the listening  
position to the speakers.  
You can set the parameters from 0 to 23 feet (0.0  
to 7.0 meters).  
• When the system is turned on, the sound of the  
TV or other components can be output from  
the speakers of the system.  
• When sound from the TV or other components  
is output via the speakers of the system, you  
US  
35  
                 
7
Press RETURN.  
[Front Left/Right] 10 ft/3.0 m: Set the front  
speaker distance.  
The system returns to the previous display.  
[Center] 10 ft/3.0 m: Set the center speaker  
distance.  
[Surround Left/Right] 10 ft/3.0 m: Set the  
surround speaker distance.  
[Subwoofer] 10 ft/3.0 m: Set the subwoofer  
distance.  
8
9
Press X/x to select [Test Tone], then  
press  
.
Press X/x to select [Off], then press  
.
• The test tone signals are not output from the HDMI  
(OUT) jack.  
• You can change the unit of measurement (feet or  
meters) by pressing the color button (RED).  
• To adjust the volume of all the speakers at one time,  
press VOL +/–.  
x [Level]  
You can adjust the sound level of the speakers.  
You can set the parameters from –6.0 dB to +6.0  
dB. Be sure to set [Test Tone] to [On] for easy  
adjustment.  
Using the Sleep Timer  
[Front Left/Right] 0.0 dB: Set the front speaker  
level.  
[Center] 0.0 dB: Set the center speaker level.  
[Surround Left/Right] 0.0 dB: Set the surround  
speaker level.  
You can set the system to turn off at a preset  
time, so you can fall asleep listening to music.  
The time can be preset in intervals of 10  
minutes.  
Press SLEEP.  
[Subwoofer] 0.0 dB: Set the subwoofer level.  
Each time you press SLEEP, the minutes display  
(the remaining time) in the front panel display  
changes by 10 minutes.  
x [Test Tone]  
The speakers will emit a test tone to adjust  
[Level].  
When you set the sleep timer, the remaining  
time appears every 5 minutes.  
When the remaining time is less than 2 minutes,  
“SLEEP” flashes in the front panel display.  
[Off]: The test tone is not emitted from the  
speakers.  
[On]: The test tone is emitted from each speaker  
in sequence while adjusting level. When you  
select one of the [Speaker Settings] items, the  
test tone is emitted from each speaker in  
sequence.  
To check the remaining time  
Press SLEEP once.  
To change the remaining time  
Adjust the sound level as follows.  
Press SLEEP repeatedly to select the desired  
time.  
1
2
Set [Test Tone] to [On].  
Press X/x to select [Level], then press  
.
3
4
Press X/x to select the desired speaker  
type, then press  
.
Press C/c to select the left or right  
speaker, then press X/x to adjust the  
level.  
5
6
Press  
.
Repeat Steps 3 to 5.  
US  
36  
         
Code numbers of controllable  
TVs  
If more than one code number is listed, try  
entering them one at a time until you find the  
code that works with your TV.  
Deactivating the Buttons  
on the Unit  
(Child Lock)  
Manufacturer  
SONY  
Code number  
You can deactivate the buttons on the unit  
(except for "/1) for preventing misoperation,  
such as child mischief (child lock function).  
01 (default)  
LG  
02  
PANASONIC  
SAMSUNG  
SHARP  
05  
Press x on the unit for more than 5  
seconds.  
02, 06  
03  
“LOCKED” appears in the front panel display.  
The child lock function is activated and the  
buttons on the unit are locked. (You can operate  
the system by using the remote.)  
TOSHIBA  
VIZIO  
04  
07  
To cancel, press x for more than 5 seconds so  
that “UNLOCK” appears in the front panel  
display.  
Changing the Brightness  
of the Front Panel  
Display  
• When you operate the buttons on the unit while the  
child lock function is on, “LOCKED” flashes in the  
front panel display.  
Press DIMMER.  
Each time you press DIMMER, the brightness of  
the front panel display is changed.  
Controlling Your TV with  
the Supplied Remote  
By adjusting the remote signal, you can control  
your TV with the supplied remote.  
Saving Power in Standby  
Mode  
• When you replace the batteries of the remote, the  
code number may reset itself to the default (SONY)  
setting. Reset the appropriate code number.  
Check that the following settings are both made:  
– [Control for HDMI] in [HDMI Settings] is set  
to [Off] (page 44).  
– [Quick Start Mode] is set to [Off] (page 44).  
Preparing the remote for  
controlling the TV  
Press and hold TV "/1 while entering your  
TV’s manufacturer’s code (see the table)  
using the number buttons. Then release TV  
"/1.  
If the setting is unsuccessful, the currently  
registered code is not changed. Re-enter the  
code number.  
US  
37  
             
Internet Browser display  
Browsing Websites  
You can check website information by pressing  
DISPLAY. The display information differs  
depending on the website and page status.  
1
Prepare for Internet browsing.  
Connect the system to a network (page 20).  
2
Press HOME.  
The home menu appears on the TV screen.  
3
4
Press C/c to select  
Press X/x to select [Internet Browser],  
then press  
The [Internet Browser] display appears.  
[Network].  
.
• Some websites may not display correctly, or not  
function.  
A
B
C
Page title  
To enter a URL  
Select [URL entry] from the options menu.  
Enter the URL using the software keyboard,  
then select [Enter].  
Page address  
Cursor  
Move by pressing C/X/x/c. Place the cursor  
on the link you want to view, then press  
The linked website is displayed.  
.
To set the default start page  
While the page you want to set is displayed,  
select [Set as start page] from the options menu.  
D
E
SSL icon  
Appears when the linked URL is secured.  
Signal strength indicator  
Appears when the system is connected to a  
wireless network.  
To return to the previous page  
Select [Previous page] from the options menu.  
When the previous page does not appear even if  
you select [Previous page], select [Window List]  
from the options menu and select the page you  
want to return to from the list.  
F
G
H
Progress bar/Loading icon  
Appears when the page is being read, or during  
file download/transfer.  
Text input field  
Press , then choose [Input] from the options  
menu to open the software keyboard.  
To quit Internet Browser  
Press HOME.  
Scroll bar  
Press C/X/x/c to move the page display left,  
up, down, or right.  
US  
38  
   
Items  
Details  
Available options  
[Open in new  
window]  
Opens a link in a new  
window.  
Various settings and operations are available by  
pressing OPTIONS.  
The available items differ depending on the  
situation.  
[Character encoding] Sets the character code.  
[Display certificate] Displays server certificates  
sent from pages that support  
SSL.  
Items  
Details  
[Browser Setup]  
Displays the Internet Browser  
settings.  
• [Zoom]: Increases or  
decreases the size of the  
displayed contents.  
• [JavaScript Setup]: Sets  
whether to enable or disable  
JavaScript.  
• [Cookie Setup]: Sets  
whether or not to accept  
browser cookies.  
• [SSL Alarm Display]: Sets  
whether to enable or disable  
SSL.  
[Input]  
Displays the software  
keyboard to enter characters  
while browsing a website.  
[Break]  
[Delete]  
Moves the cursor to the next  
line in the text input field.  
Erases one character on the  
left side of the cursor during  
text input.  
[Window List]  
Displays a list of all currently  
opened websites.  
Allows you to return to a  
previously displayed website  
by selecting the window.  
[Bookmark List]  
[URL entry]  
Displays the bookmark list.  
Allows you to enter a URL  
when the software keyboard  
is displayed.  
[Previous page]  
[Next page]  
Moves to a previously  
displayed page.  
Moves to the previously  
displayed next page.  
[Cancel loading]  
[Reload]  
Stops loading a page.  
Reloads the same page.  
[Add to Bookmark]  
Adds the currently displayed  
website to the bookmark list.  
[Set as start page]  
Sets the currently displayed  
website as the default start  
page.  
US  
39  
Icon  
Explanation  
Re-runs the Easy Setup to make  
Settings and Adjustments  
the basic settings.  
Resets the system to the factory  
settings.  
Using the Setup Display  
You can make various adjustments to items such  
as picture and sound.  
The default settings are underlined.  
[Network Update]  
For information about update functions, refer to  
• Playback settings stored in the disc take priority over  
the Setup Display settings and not all the functions  
described may work.  
the following website:  
1
Press HOME.  
The home menu appears on the TV screen.  
During a software update, “UPDATING”  
appears in the front panel display. After the  
update completes, the main unit automatically  
turns off. Please wait for the software update to  
complete; do not turn the main unit on or off, or  
operate the main unit or TV.  
2
3
Press C/c to select  
Press X/x to select the setup category  
icon to change, then press  
[Setup].  
.
You can setup the following options.  
Icon  
Explanation  
Updates the software of the  
system.  
Makes the screen settings  
according to the type of  
connecting jacks.  
Makes the audio settings  
according to the type of  
connecting jacks.  
Makes detailed settings for BD/  
DVD playback.  
Makes detailed settings for the  
Parental Control function.  
Makes detailed settings for  
Super Audio CD playback.  
Makes the system-related  
settings.  
Makes detailed settings for  
Internet and network.  
US  
40  
           
x [Output Video Format]  
[Screen Settings]  
[HDMI]: Normally select [Auto]. Select  
[Original Resolution] to output the resolution  
recorded on the disc. (When the resolution is  
lower than SD resolution, it is scaled up to SD  
resolution.)  
x [3D Output Setting]  
[Auto]: Normally select this.  
[Off]: Select this to display all contents in 2D.  
[Video]: Automatically sets the lowest  
resolution.  
x [TV Screen Size Setting for 3D]  
Sets the screen size of your 3D compatible TV.  
x [BD-ROM 24p Output]  
[Auto]: Outputs 1920 × 1080p/24 Hz video  
signals only when connecting a 1080/24p-  
compatible TV using the HDMI (OUT) jack.  
[On]: Select this when your TV is compatible  
with 1080/24p video signals.  
x [TV Type]  
[16:9]: Select this when connecting to a wide-  
screen TV or a TV with a wide-mode function.  
[4:3]: Select this when connecting to a 4:3  
screen TV without a wide-mode function.  
[Off]: Select this when your TV is not  
compatible with 1080/24p video signals.  
x [Screen Format]  
[Full]: Select this when connecting to a TV with  
a wide-mode function. Displays a 4:3 screen  
picture in 16:9 aspect ratio even on a wide-  
screen TV.  
[Normal]: Changes the picture size to fit the  
screen size with the original picture aspect ratio.  
x [DVD-ROM 24p Output]  
[Auto]: Outputs 1920 × 1080p/24 Hz video  
signals only when connecting a 1080/24p-  
compatible TV using the HDMI (OUT) jack.  
[Off]: Select this when your TV is not  
compatible with 1080/24p video signals.  
x [DVD Aspect Ratio]  
[Letter Box]: Displays a wide picture with black  
bands on the top and bottom.  
x [YCbCr/RGB (HDMI)]  
[Auto]: Automatically detects the type of  
external device, and switches to the matching  
color setting.  
[YCbCr (4:2:2)]: Outputs YCbCr 4:2:2 video  
signals.  
[YCbCr (4:4:4)]: Outputs YCbCr 4:4:4 video  
signals.  
[RGB]: Select this when connecting to a device  
with an HDCP compliant DVI jack.  
[Pan & Scan]: Displays a full-height picture on  
the entire screen, with trimmed sides.  
x [HDMI Deep Color Output]  
[Auto]: Normally select this.  
[16bit], [12bit], [10bit]: Outputs 16bit/12bit/  
10bit video signals when the connected TV is  
compatible with Deep Color.  
x [Cinema Conversion Mode]  
[Off]: Select this when the picture is unstable or  
colors appear unnatural.  
[Auto]: Normally select this. The unit  
automatically detects whether the material is  
video-based or film-based, and switches to the  
appropriate conversion method.  
[Video]: The conversion method suited for  
video-based material will always be selected  
regardless of the material.  
x [Pause Mode] (BD/DVD VIDEO/DVD-R/  
DVD-RW only)  
[Auto]: The picture, including subjects that  
move dynamically, is output with no jitter.  
Normally select this position.  
US  
41  
                                 
[Frame]: The picture, including subjects that do  
not move dynamically, is output in high  
resolution.  
• When [Control for HDMI] is set to [On] (page 44),  
[Audio Output] is set to [Speaker + HDMI]  
automatically and this setting cannot be changed.  
• When [Audio Output] is set to [HDMI], the output  
signal format for the “TV” function is 2-channel  
linear PCM.  
[Audio Settings]  
x [Sound Effect]  
x [BD Audio MIX Setting]  
You can set the system’s sound effects (SOUND  
MODE setting (page 24)) on/off.  
For a 2-channel source, you can select [Dolby  
Pro Logic], [DTS Neo:6 Cinema], or [DTS  
Neo:6 Music] to simulate surround sound.  
[On]: Outputs the audio obtained by mixing the  
interactive audio and secondary audio to the  
primary audio.  
[Off]: Outputs the primary audio only.  
[Sound Mode On]: Enables the surround effect  
of the sound mode (page 24). The sampling  
frequency upper limit is set to 48 kHz.  
[Dolby Pro Logic]: The system simulates  
surround sound from 2-channel sources and  
outputs sound from all the 5.1 channel speakers  
(Dolby Pro Logic decoding).  
[DTS Neo:6 Cinema]/[DTS Neo:6 Music]: The  
system simulates surround sound from  
2-channel sources and produces 6.1 channel  
sound (DTS Neo:6 Cinema/DTS Neo:6 Music  
mode decoding).  
x [Audio DRC]  
You can compress the dynamic range of the  
sound track.  
[Auto]: Performs playback at the dynamic range  
specified by the disc (BD-ROM only).  
[On]: The system reproduces the sound track  
with the kind of dynamic range that the  
recording engineer intended.  
[Off]: No compression of dynamic range.  
x [Attenuate - AUDIO]  
[Off]: The sound effects are disabled. You can  
hear sound as it is recorded.  
Distortion may occur when you listen to a  
component connected to the AUDIO (AUDIO  
IN L/R) jacks. You can prevent distortion by  
attenuating the input level on the unit.  
x [Speaker Settings]  
To obtain the best possible surround sound, set  
the speakers. For details, see “Setting the  
[On]: Attenuates the input level. The output  
level will decrease at this setting.  
[Off]: Normal input level.  
x [Audio Output]  
You can select the output method where the  
audio signal is output.  
[Speaker]: Outputs multi-channel sound from  
the system’s speakers only.  
[Speaker + HDMI]: Outputs multi-channel  
sound from the system’s speakers and 2-channel  
linear PCM signals from the HDMI (OUT) jack.  
[HDMI]: Outputs sound from the HDMI (OUT)  
jack only. Sound format depends on the  
connected component.  
US  
42  
                 
[BD/DVD Viewing  
Settings]  
[Parental Control  
Settings]  
x [BD/DVD Menu Language]  
x [Password]  
You can select the default menu language for  
BD-ROMs or DVD VIDEOs.  
When you select [Select Language Code], the  
display for entering the language code appears.  
Enter the code for your language by referring to  
Set or change the password for the Parental  
Control function. A password allows you to set  
a restriction on BD-ROM, DVD VIDEO, or  
Internet video playback. If necessary, you can  
differentiate the restriction levels for BD-ROMs  
and DVD VIDEOs.  
x [Audio Language]  
x [Parental Control Area Code]  
You can select the default track language for  
BD-ROMs or DVD VIDEOs.  
When you select [Original], the language given  
priority in the disc is selected.  
Playback of some BD-ROMs or DVD VIDEOs  
can be limited according to the geographic area.  
Scenes may be blocked or replaced with  
different scenes. Follow the on-screen  
When you select [Select Language Code], the  
display for entering the language code appears.  
Enter the code for your language by referring to  
instructions and enter your four-digit password.  
x [BD Parental Control]/[DVD Parental  
Control]/[Internet Video Parental Control]  
By setting Parental Control, scenes can be  
blocked or replaced with different scenes.  
Follow the on-screen instructions and enter your  
four-digit password.  
x [Subtitle Language]  
You can select the default subtitle language for  
BD-ROMs or DVD VIDEOs.  
When you select [Select Language Code], the  
display for entering the language code appears.  
Enter the code for your language by referring to  
x [Internet Video Unrated]  
[Allow]: Allows the playback of unrated  
Internet videos.  
[Block]: Blocks the playback of unrated Internet  
videos.  
x [BD Hybrid Disc Playback Layer]  
[BD]: Plays BD layer.  
[DVD/CD]: Plays DVD or CD layer.  
[Music Settings]  
x [BD Internet Connection]  
[Allow]: Normally select this.  
[Do not allow]: Prohibits Internet connection.  
x [Super Audio CD Playback Layer]  
[Super Audio CD]: Plays the Super Audio CD  
layer.  
[CD]: Plays the CD layer.  
x [Super Audio CD Playback Channel]  
[DSD 2ch]: Plays the 2-channel area.  
[DSD Multi]: Plays the multi-channel area.  
US  
43  
                                       
[Off]: Off.  
[System Settings]  
x [Gracenote Settings]  
[Auto]: Automatically downloads disc  
information when you stop playback of the disc.  
To download, the system must be connected to  
the network.  
x [OSD Language]  
You can select your language for the system on-  
screen displays.  
[Manual]: Downloads disc information when  
[Video Search] or [Music Search] is selected.  
x [HDMI Settings]  
[Control for HDMI]  
[On]: On. You can operate mutually between  
x [System Information]  
components that are connected with an HDMI  
cable.  
You can display the system’s software version  
information and the MAC address.  
[Off]: Off.  
x [Software License Information]  
You can display the Software License  
Information.  
[Audio Return Channel]  
This function is available when you connect the  
system to a TV’s HDMI IN jack that is  
compatible with the Audio Return Channel  
function.  
[Auto]: The system can receive the digital audio  
signal of the TV automatically via an HDMI  
cable.  
[Network Settings]  
[Off]: Off.  
x [Internet Settings]  
Connect the system to the network beforehand.  
• This function is available only when [Control for  
HDMI] is set to [On].  
[Wired Setup]: Select this when you connect to  
a broadband router using a LAN cable.  
[Wireless Setup(built-in)] (BDV-E390/BDV-  
E385/BDV-T39 only): Select this when you use  
the wireless LAN that is built into the system for  
wireless network connection.  
[USB Wireless Setup] (BDV-E490/BDV-E290/  
BDV-E190 only): Select this when you use a  
USB Wireless LAN Adapter for wireless  
network connection.  
x [Quick Start Mode]  
[On]: Shortens the startup time from standby  
mode. You can operate the system quickly after  
turning it on.  
[Off]: The default setting.  
x [Auto Display]  
[On]: Automatically displays information on the  
screen when changing the viewing titles, picture  
modes, audio signals, etc.  
[View Network Status]: Displays the current  
network status.  
[Off]: Displays information only when you  
press DISPLAY.  
• For further details, visit the following website and  
check the FAQ:  
x [Screen Saver]  
[On]: Turns on the screen saver function.  
[Off]: Off.  
x [Network Connection Diagnostics]  
You can run the network diagnostic to check if  
the network connection has been made properly.  
x [Software Update Notification]  
[On]: Sets the system to inform you of newer  
software version information (page 40).  
US  
44  
                                     
x [Connection Server Settings]  
Sets whether or not to display the connected  
DLNA server.  
[Easy Setup]  
x [Easy Initial Settings]  
x [Renderer Options]  
Runs [Easy Initial Settings] to make the basic  
settings. Follow the on-screen instructions.  
[Auto Access Permission]: Sets whether or not  
to allow automatic access from a newly detected  
DLNA controller.  
[Smart Select]: Allows a Sony DLNA controller  
to find the system as the target component to  
operate by using the infrared ray. You can set  
this function to on or off.  
x [Easy Network Settings]  
Runs [Easy Network Settings] to make the basic  
network settings. Follow the on-screen  
instructions.  
[Renderer Name]: Displays the system’s name  
as it is listed on other DLNA devices on the  
network.  
[Resetting]  
x [Renderer Access Control]  
Sets whether or not to accept commands from  
DLNA controllers.  
x [Reset to Factory Default Settings]  
You can reset the system settings to the factory  
default by selecting the group of settings. All the  
settings within the group will be reset.  
x [PARTY Auto Start]  
[On]: Starts a PARTY or joins an existing  
PARTY at the request of a networked device  
compatible with the PARTY STREAMING  
function.  
x [Initialize Personal Information]  
You can erase your personal information stored  
in the system.  
[Off]: Off.  
x [Media Remote Device Registration]  
Registers your “Media Remote” device.  
x [Registered Media Remote Devices]  
Displays a list of your registered “Media  
Remote” devices.  
US  
45  
                             
• Do not place the system in a place where medical  
equipment is in use. It may cause a malfunction of  
medical equipment.  
Additional Information  
Precautions  
On safety  
• To prevent fire or shock hazard, do not place objects  
filled with liquids, such as vases, on the system, or  
place the system near water, such as near a bathtub or  
shower room. Should any solid object or liquid fall  
into the cabinet, unplug the system and have it  
checked by qualified personnel before operating it  
any further.  
• If you use a pacemaker or other medical device,  
consult your physician or the manufacturer of your  
medical device before using the wireless LAN  
function.  
On operation  
• If the system is brought directly from a cold to a warm  
location, or is placed in a very damp room, moisture  
may condense on the lenses inside the unit. Should  
this occur, the system may not operate properly. In  
this case, remove the disc and leave the system turned  
on for about half an hour until the moisture  
evaporates.  
• Do not touch the AC power cord (mains lead) with  
wet hands. Doing so may cause an electric shock.  
• When you move the system, take out any disc. If you  
do not, the disc may be damaged.  
On power sources  
• If anything falls into the cabinet, unplug the unit and  
have it checked by qualified personnel before  
operating it any further.  
• Unplug the unit from the wall outlet (mains) if you do  
not intend to use it for an extended period of time. To  
disconnect the cord, pull it out by the plug, never by  
the cord.  
On adjusting volume  
• Do not turn up the volume while listening to a section  
with very low level inputs or no audio signals. If you  
do, the speakers may be damaged when a peak level  
section is suddenly played.  
On placement  
• Place the system in a location with adequate  
ventilation to prevent heat build-up in the system.  
• At high volume, over long periods of time, the cabinet  
becomes hot to the touch. This is not a malfunction.  
However, touching the cabinet should be avoided. Do  
not place the system in a confined space where  
ventilation is poor as this may cause overheating.  
• Do not block the ventilation slots by putting anything  
on the system. The system is equipped with a high  
power amplifier. If the ventilation slots are blocked,  
the system can overheat and malfunction.  
On cleaning  
• Clean the cabinet, panel, and controls with a soft cloth  
slightly moistened with a mild detergent solution. Do  
not use any type of abrasive pad, scouring powder or  
solvent such as alcohol or benzine.  
If you have any questions or problems concerning  
your system, please consult your nearest Sony dealer.  
On cleaning discs, disc/lens  
cleaners  
• Do not use cleaning discs or disc/lens cleaners  
(including wet or spray types). These may cause  
the apparatus to malfunction.  
• Do not place the system on surfaces (rugs, blankets,  
etc.) or near materials (curtains, draperies) that may  
block the ventilation slots.  
• Do not install the system in a confined space, such as  
a bookshelf or similar unit.  
• Do not install the system near heat sources such as  
radiators, air ducts, or in a place subject to direct  
sunlight, excessive dust, mechanical vibration, or  
shock.  
On replacement of parts  
• In the events that this system is repaired, repaired  
parts may be collected for reuse or recycling  
purposes.  
• Do not install the system in an inclined position. It is  
designed to be operated in a horizontal position only.  
• Keep the system and discs away from components  
with strong magnets, such as microwave ovens, or  
large loudspeakers.  
On your TV’s color  
• If the speakers should cause the TV screen to have  
color irregularity, turn off the TV then turn it on after  
15 to 30 minutes. If color irregularity should persist,  
place the speakers further away from the TV set.  
• Do not place heavy objects on the system.  
• Do not place metal objects in front of the front panel.  
They may limit reception of radio waves.  
US  
46  
   
IMPORTANT NOTICE  
Caution: This system is capable of holding a still  
Notes about Discs  
On handling discs  
• To keep the disc clean, handle the disc by its  
edge. Do not touch the surface.  
video image or on-screen display image on your  
television screen indefinitely. If you leave the still  
video image or on-screen display image displayed  
on your TV for an extended period of time you risk  
permanent damage to your television screen.  
Projection televisions are especially susceptible to  
this.  
• Do not stick paper or tape on the disc.  
On moving the system  
• Before moving the system, make sure that there is no  
disc inserted, and remove the AC power cord (mains  
lead) from the wall outlet (mains).  
• Do not expose the disc to direct sunlight or  
heat sources such as hot air ducts, or leave it in  
a car parked in direct sunlight as the  
temperature may rise considerably inside the  
car.  
• After playing, store the disc in its case.  
On cleaning  
• Before playing, clean the disc with a cleaning  
cloth.  
Wipe the disc from the center out.  
• Do not use solvents such as benzine, thinner,  
commercially available cleaners, or anti-static  
spray intended for vinyl LPs.  
This system can only play a standard circular  
disc. Using neither standard nor circular discs  
(e.g., card, heart, or star shape) may cause a  
malfunction.  
Do not use a disc that has a commercially  
available accessory attached, such as a label or  
ring.  
US  
47  
 
“PROTECT” and “PUSH PWR” appear  
alternately in the front panel display.  
t Press "/1 to turn off the system, and check the  
following items after “STANDBY”  
disappears.  
Troubleshooting  
If you experience any of the following  
difficulties while using the system, use this  
troubleshooting guide to help remedy the  
problem before requesting repairs. Should any  
problem persist, consult your nearest Sony  
dealer.  
• Are the + and – speaker cords short-  
circuited?  
• Are you using only the specified speakers?  
• Is anything blocking the ventilation holes of  
the system?  
• After checking the above items and fixing  
any problems, turn on the system. If the cause  
of the problem cannot be found even after  
checking all the above items, consult your  
nearest Sony dealer.  
Note that if service personnel changes some  
parts during repair, these parts may be retained.  
General  
The power does not turn on.  
t Check that the AC power cord (mains lead) is  
connected securely.  
“LOCKED” appears in the front panel  
display.  
t Set the child lock function to off (page 37).  
The remote does not function.  
t The distance between the remote and the unit is  
too far.  
“DEMO. LOCK” appears in the front panel  
display.  
t Contact your nearest Sony dealer or local  
authorized Sony service facility.  
t The batteries in the remote are weak.  
The disc tray does not open and you cannot  
remove the disc even after you press Z.  
t Try the following:  
“Exxxx” appears in the front panel display.  
t Contact your nearest Sony dealer or local  
authorized Sony service facility and give the  
error code.  
1 Press and hold N and Z on the unit for  
more than 5 seconds to open the disc tray.  
2 Remove the disc.  
3 Disconnect the AC power cord (mains  
lead) from the wall outlet (mains), then  
reconnect after several minutes.  
appears without any messages on the  
entire TV screen.  
t Contact your nearest Sony dealer or local  
authorized Sony service facility.  
The system does not work normally.  
t Disconnect the AC power cord (mains lead)  
from the wall outlet (mains), then reconnect  
after several minutes.  
Picture  
There is no picture.  
t Check the output method on your system  
Messages  
There is no picture when you make an HDMI  
cable connection.  
t The unit is connected to an input device that is  
not HDCP (High-bandwidth Digital Content  
Protection) compliant (“HDMI” on the front  
panel does not light up) (page 18).  
[A new software version is available. Please  
go to the “Setup” section of the menu and  
select “Network Update” to perform the  
update.] appears on the TV screen.  
t See [Network Update] (page 40) to update the  
system to a newer software version.  
US  
48  
 
No picture appears when the video output  
resolution selected in [Output Video Format]  
is incorrect.  
t Press and hold N and VOL – on the unit for  
more than 5 seconds to reset the video output  
resolution to the lowest resolution.  
Sound  
There is no sound.  
t The speaker cords are not connected securely.  
t Check the speaker settings (page 35).  
The dark area of the picture is too dark/the  
bright area is too bright or unnatural.  
t Set [Picture Quality Mode] to [Standard]  
There is no sound from the TV via the HDMI  
(OUT) jack when using the Audio Return  
Channel function.  
t Set [Control for HDMI] in [HDMI Settings] of  
[System Settings] to [On] (page 44). Also, set  
[Audio Return Channel] in [HDMI Settings] of  
[System Settings] to [Auto] (page 44).  
t Make sure that your TV is compatible with the  
Audio Return Channel function.  
t Make sure that an HDMI cable is connected to  
a jack on your TV that is compatible with the  
Audio Return Channel function.  
The picture is not output correctly.  
t Check the [Output Video Format] settings in  
[Screen Settings] (page 41).  
t If the analog and digital signals are output at  
the same time, set [BD-ROM 24p Output] or  
[DVD-ROM 24p Output] in [Screen Settings]  
to [Off] (page 41).  
t For BD-ROMs, check the [BD-ROM 24p  
Output] settings in [Screen Settings] (page 41).  
The system does not output sound of TV  
programs correctly when connected to a set-  
top box.  
t Set [Audio Return Channel] in [HDMI  
Settings] of [System Settings] to [Off]  
Picture noise appears.  
t Clean the disc.  
t If the picture output from your system goes  
through your VCR to get to your TV, the copy-  
protection signal applied to some BD/DVD  
programs could affect picture quality. If you  
still experience problems even when you  
connect your unit directly to your TV, try  
connecting your unit to the other input jacks.  
t Check the connections (page 19).  
Severe hum or noise is heard.  
t Move your TV away from the audio  
components.  
t Clean the disc.  
An image is not displayed on the entire TV  
screen.  
t Check the setting of [TV Type] in [Screen  
Settings](page 41).  
The sound loses stereo effect when you play  
a CD.  
t Select stereo sound by pressing AUDIO  
t The aspect ratio on the disc is fixed.  
Color irregularity occurs on the TV screen.  
t If the speakers are used with a CRT-based TV  
or projector, install the speakers at least 1.0 ft  
(0.3 meters) from the TV set.  
t If the color irregularity persists, turn off the TV  
set once, then turn it on after 15 to 30 minutes.  
t Make sure that no magnetic object (magnetic  
latch on a TV stand, health care device, toy,  
etc.) is placed near the speakers.  
The sound comes from the center speaker  
only.  
t Depending on the disc, the sound may come  
from the center speaker only.  
No sound or only a very low-level sound is  
heard from the surround speakers.  
t Check the speaker connections and settings  
(pages 17, 35).  
t Check the sound mode setting (page 24).  
t Depending on the source, the effect of the  
surround speakers may be less noticeable.  
t A 2-channel source is being played.  
There is no picture after playing a video/  
photo file on the iPod/iPhone. (BDV-E490/  
BDV-E390/BDV-E385/BDV-E290 only.)  
t Select the input on your TV for this system.  
US  
49  
Distortion occurs in the sound of a connected  
component.  
t Reduce the input level for the connected  
component by setting [Attenuate - AUDIO]  
The language for the soundtrack/subtitle or  
angles cannot be changed.  
t Try using the BD’s or DVD’s menu.  
t Multi-lingual tracks/subtitles or multi-angles  
are not recorded on the BD or DVD being  
played.  
Bonus contents or other data that are  
contained in a BD-ROM cannot be played.  
t Try the following:  
Tuner  
Radio stations cannot be tuned in.  
t Check that the antenna (aerial) is connected  
securely. Adjust the antenna (aerial) or connect  
an external antenna (aerial) if necessary.  
t The signal strength of the stations is too weak  
(when tuning in with automatic tuning). Use  
manual tuning.  
1 Remove the disc.  
2 Turn the system off.  
3 Remove and reconnect the USB device  
4 Turn the system on.  
5 Insert the BD-ROM with BONUSVIEW/  
BD-LIVE.  
Playback  
USB device  
The disc does not play.  
t The region code on the BD/DVD does not  
match the system.  
t Moisture has condensed inside the unit and  
may cause damage to the lenses. Remove the  
disc and leave the unit turned on for about half  
an hour.  
t The system cannot play a recorded disc that is  
not correctly finalized (page 52).  
The USB device is not recognized.  
t Try the following:  
1 Turn the system off.  
2 Remove and reconnect the USB device.  
3 Turn the system on.  
t Make sure that the USB device is securely  
connected to the  
t Check if the USB device or a cable is damaged.  
t Check if the USB device is on.  
(USB) port.  
t If the USB device is connected via a USB hub,  
disconnect it and connect the USB device  
directly to the unit.  
File names are not displayed correctly.  
t The system can only display ISO 8859-1  
compliant character formats. Other character  
formats may be displayed differently.  
t Depending on the writing software used, the  
input characters may be displayed differently.  
BRAVIA Internet Video  
A disc does not start playing from the  
beginning.  
t Resume play has been selected. Press  
OPTIONS and select [Play from beginning],  
The picture/sound is poor/certain programs  
display with a loss of detail, especially  
during fast-motion or dark scenes.  
t Picture/sound quality may be poor depending  
on Internet content providers.  
then press  
.
t Picture/sound quality may be improved by  
changing the connection speed. Sony  
Playback does not start from the resume  
point where you last stopped playing.  
t The resume point may be cleared from  
memory depending on the disc when  
• you open the disc tray.  
recommends a connection speed of at least 2.5  
Mbps for standard-definition video and 10  
Mbps for high-definition video.  
t Not all videos contain sound.  
• you disconnect the USB device.  
• you play other content.  
• you turn off the unit.  
The picture is small.  
t Press X to zoom in.  
US  
50  
Move the system and the wireless LAN router  
closer to each other.  
“BRAVIA” Sync ([Control for  
HDMI])  
t Devices that use a 2.4 GHz frequency band,  
such as a microwave, Bluetooth, or digital  
cordless device, may interrupt communication.  
Move the unit away from such devices, or turn  
off such devices.  
The [Control for HDMI] function does not  
work (“BRAVIA” Sync).  
t Check that [Control for HDMI] is set to [On]  
t If you change the HDMI connection, turn the  
system off and on again.  
t If power failure occurs, set [Control for HDMI]  
to [Off], then set [Control for HDMI] to [On]  
t Check the following and refer to the operating  
instructions supplied with the component.  
• The connected component is compatible with  
the [Control for HDMI] function.  
The desired wireless router is not shown in  
the wireless network list.  
t Press RETURN to return to the previous  
screen, and try [Wireless Setup(built-in)]/  
[USB Wireless Setup] again. If the desired  
wireless router is still not detected, select  
[Manual registration].  
• The connected component’s setting for the  
[Control for HDMI] function is correct.  
Network connection  
The system cannot connect to the network.  
t Check the network connection (page 20) and  
the network settings (page 44).  
Wireless LAN connection  
You cannot connect your PC to the Internet  
after [Wi-Fi Protected Setup (WPS)] is  
performed.  
t The wireless settings of the router may change  
automatically if you use the Wi-Fi Protected  
Setup function before adjusting the settings of  
the router. In this case, change the wireless  
settings of your PC accordingly.  
The system cannot connect to the network or  
the network connection is unstable.  
t Check if the wireless LAN router is on.  
t Check the network connection (page 20) and  
the network settings (page 44).  
t Depending on the usage environment,  
including the wall material, radio wave  
reception conditions, or obstacles between the  
system (or USB wireless LAN adapter) and the  
wireless LAN router, the possible  
communication distance may be shortened.  
US  
51  
   
Therefore, these discs may not be compatible  
with this product.  
Playable Discs  
Note on playback operations of a  
BD/DVD  
Some playback operations of a BD/DVD may be  
intentionally set by software producers. Since  
this system plays a BD/DVD according to the  
disc contents the software producers designed,  
some playback features may not be available.  
1)  
Blu-ray Disc  
BD-ROM  
2)  
BD-R/BD-RE  
DVD-ROM  
3)  
DVD  
DVD-R/DVD-RW  
DVD+R/DVD+RW  
3)  
CD  
CD-DA (Music CD)  
CD-ROM  
Note about double-layer BDs/  
DVDs  
CD-R/CD-RW  
Super Audio CD  
The playback picture and sound may be  
momentarily interrupted when the layers switch.  
1)Since Blu-ray Disc specifications are new and  
evolving, some discs may not be playable depending  
on the disc type and version. Also, the audio output  
differs depending on the source, connected output  
jack, and selected audio settings.  
Region code (BD-ROM/DVD  
VIDEO only)  
Your system has a region code printed on the  
bottom of the unit and will only play a BD-  
ROM/DVD VIDEO (playback only) labeled  
ALL  
2)BD-RE: Ver.2.1  
BD-R: Ver.1.1, 1.2, 1.3 including organic pigment  
type BD-R (LTH type)  
BD-Rs recorded on a PC cannot be played if  
postscripts are recordable.  
with identical region codes or  
.
3)A CD or DVD disc will not play if it has not been  
correctly finalized. For more information, refer to the  
operating instructions supplied with the recording  
device.  
Discs that cannot be played  
• BDs with cartridge  
• BDXLs  
• DVD-RAMs  
• HD DVDs  
• DVD Audio discs  
• PHOTO CDs  
• Data part of CD-Extras  
• Super VCDs  
• Audio material side on DualDiscs  
• For U.S. and Canada models: A disc recorded  
in a color system other than NTSC, such as  
PAL  
(This system conforms to the NTSC color  
system.)  
Notes on discs  
This product is designed to play back discs that  
conform to the Compact Disc (CD) standard.  
DualDiscs and some music discs encoded with  
copyright protection technologies do not  
conform to the Compact Disc (CD) standard.  
US  
52  
     
• Some files may not play depending on the file format,  
the file encoding, the recording condition, or DLNA  
server condition.  
Playable Types of Files  
Video  
• Some files edited on a PC may not play.  
• The system can recognize the following files or  
folders in BDs, DVDs, CDs and USB devices:  
– up to folders in the 9th layer, including the root  
folder  
File format  
Extensions  
1)5)  
MPEG-1 Video/PS  
“.mpg,” “.mpeg,” “.m2ts,”  
“.mts”  
MPEG-2 Video/PS,  
1)6)  
TS  
– up to 500 files/folders in a single layer  
• The system can recognize the following files or  
folders stored in the DLNA server:  
Xvid  
“.avi”  
1)5)  
MPEG4/AVC  
“.mkv,” “.mp4,” “.m4v,”  
“.m2ts,” “.mts”  
– up to folders in the 19th layer  
1)5)  
WMV9  
“.wmv,” “.asf”  
3)5)  
– up to 999 files/folders in a single layer  
• Some USB devices may not work with this system.  
• The system can recognize Mass Storage Class (MSC)  
devices (such as flash memory or an HDD), Still  
Image Capture Devices (SICDs), and 101-key  
keyboards.  
2)  
AVCHD  
Music  
File format  
Extensions  
MP3 (MPEG-1 Audio  
Layer III)  
“.mp3”  
• To avoid data corruption or damage to USB memory  
or other devices, turn the system off before  
connecting or removing USB memory or other  
devices.  
1)4)5)  
AAC/HE-AAC  
“.m4a”  
“.wma”  
“.wav”  
1)4)  
WMA9 Standard  
• The system may not play high bit rate video files from  
a DATA CD smoothly. It is recommended to play  
high bit rate video files using a DATA DVD or  
DATA BD.  
LPCM  
Photo  
File format  
Extensions  
“.jpg,” “.jpeg”  
“.gif”  
JPEG  
7)  
GIF  
7)  
PNG  
“.png”  
8)  
MPO  
“.mpo”  
1)The system does not play files encoded with DRM.  
2)AVCHD Ver.2.0 (AVCHD 3D/Progressive)  
compatible.  
3)The system plays AVCHD-format files that are  
recorded via a digital video camera, etc. To watch  
AVCHD-format files, the disc with AVCHD-format  
files on it must be finalized.  
4)The system does not play files encoded with  
Lossless, etc.  
5)The system does not play these files via the DLNA  
function.  
6)The system plays SD resolution only via the DLNA  
function.  
7)The system does not play animated PNG or animated  
GIF files.  
8)For MPO files other than 3D, the key image or the  
first image is displayed.  
US  
53  
   
Supported Audio  
Formats  
Audio formats supported by this system are as  
follows.  
Specifications  
Amplifier Section  
BDV-E490/BDV-E390/BDV-E385/BDV-E290/  
BDV-T39  
U.S.models:  
AUDIO POWER SPECIFICATIONS  
POWER OUTPUT AND TOTAL HARMONIC  
DISTORTION:  
Function  
Format  
“BD/DVD”  
“TV” (DIGITAL IN)  
LPCM 2ch  
a
a
a
(FTC)  
Front L + Front R:  
With 3 ohms loads, both  
channels driven, from 180  
Hz - 20 kHz; rated 50 watts  
per channel minimum  
RMS power, with no more  
than 1% total harmonic  
distortion from 250 milli  
watts to rated output.  
LPCM 5.1ch,  
LPCM 7.1ch  
Dolby Digital  
a
a
a
Dolby  
TrueHD,  
DolbyDigital  
Plus  
DTS  
a
a
Other models:  
POWER OUTPUT (rated)  
Front L/Front R:  
DTS-ES  
Discrete 6.1,  
DTS-ES  
75 W + 75 W (at 3 ohms,  
1 kHz, 1% THD)  
POWER OUTPUT (reference)  
Matrix 6.1  
DTS96/24  
a
a
Front L/Front R/Surround L/Surround R:  
DTS-HD  
High  
Resolution  
Audio  
125 W (per channel at  
3 ohms, 1 kHz)  
250 W (at 6 ohms, 1 kHz)  
250 W (at 6 ohms, 80 Hz)  
Center:  
Subwoofer:  
Inputs (Analog)  
AUDIO (AUDIO IN)  
Inputs (Digital)  
DTS-HD  
Master  
Audio  
a
Sensitivity: 1 V/400 mV  
TV (Audio Return Channel/OPTICAL)  
Supported formats: LPCM  
a: Supported format.  
–: Unsupported format.  
2CH (up to 48 kHz), Dolby  
Digital, DTS  
• For LPCM 2ch format, the supported sampling  
frequency of the digital signal is up to 48 kHz when  
using the “TV” function.  
BDV-E190  
POWER OUTPUT (rated)  
Front L/Front R:  
40 W + 40 W (at 3 ohms,  
1 kHz, 1% THD)  
POWER OUTPUT (reference)  
Front L/Front R/Surround L/Surround R:  
40 W (per channel at  
3 ohms, 1 kHz)  
Center:  
Subwoofer:  
70 W (at 6 ohms, 1 kHz)  
70 W (at 6 ohms, 80 Hz)  
Inputs (Analog)  
AUDIO (AUDIO IN)  
Inputs (Digital)  
Sensitivity: 2 V/700 mV  
TV (Audio Return Channel/OPTICAL)  
Supported formats: LPCM  
2CH (up to 48 kHz), Dolby  
Digital, DTS  
US  
54  
   
0.62 kg (1 lb 5 7/8 oz) (with  
speaker cord)  
Video Section  
Outputs  
VIDEO: 1 Vp-p 75 ohms  
Type A (19pin)  
Front/Surround (SS-TSB117) for BDV-E190  
HDMI Section  
Connector  
Dimensions (approx.)  
91 mm × 148 mm × 87 mm  
(3 5/8 in × 5 7/8 in ×  
3 1/2 in) (w/h/d)  
Front:  
0.33 kg (11 5/8 oz) (with  
speaker cord)  
Surround:  
0.38 kg (13 3/8 oz) (with  
speaker cord)  
BD/DVD/Super Audio CD/CD System  
Signal format system  
NTSC  
Mass (approx.)  
USB Section  
(USB) port:  
Type A (For connecting  
USB memory, memory  
card reader, digital still  
camera, and digital video  
camera)  
Center (SS-CTB113) for BDV-E490/BDV-  
E390/BDV-E385/BDV-E290/BDV-T39  
LAN Section  
LAN (100) terminal  
Dimensions (approx.)  
245 mm × 87 mm × 78 mm  
(9 3/4 in × 3 1/2 in ×  
3 1/8 in) (w/h/d)  
0.59 kg (1 lb 4 3/4 oz) (with  
speaker cord)  
100BASE-TX Terminal  
Wireless LAN Section  
Blu-ray Disc/DVD receiver (HBD-E390/HBD-  
E385/HBD-T39)  
Standards Compliance  
Frequency and Channel 2.4 GHz - 2.4835 GHz  
[CH1 -11]  
Mass (approx.)  
IEEE 802.11 b/g/n  
Center (SS-CTB112) for BDV-E190  
Dimensions (approx.)  
145 mm × 94 mm × 84 mm  
(5 3/4 in × 3 3/4 in ×  
3 3/8 in) (w/h/d)  
FM Tuner Section  
System  
PLL quartz-locked digital  
synthesizer  
Mass (approx.)  
0.39 kg (13 3/4 oz) (with  
speaker cord)  
Tuning range  
87.5 MHz - 108.0 MHz  
(100 kHz step)  
Subwoofer (SS-WSB115) for BDV-E490  
Antenna (aerial)  
Antenna (aerial) terminals 75 ohms, unbalanced  
FM wire antenna (aerial)  
Dimensions (approx.)  
225 mm × 365 mm × 320  
mm (8 7/8 in × 14 3/8 in ×  
12 5/8 in) (w/h/d)  
6.1 kg (13 lb 7 1/8 oz) (with  
speaker cord)  
Speakers  
Mass (approx.)  
Front (SS-TSB119) for BDV-E490  
Dimensions (approx.)  
95 mm × 680 mm × 71 mm  
(3 3/4 in × 26 7/8 in ×  
2 7/8 in) (w/h/d) (wall-  
mounted part)  
Subwoofer (SS-WSB114) for BDV-E390/  
BDV-E385/BDV-E290/BDV-T39  
Dimensions (approx.)  
215 mm × 335 mm × 260  
mm (8 1/2 in × 13 1/4 in ×  
10 1/4 in) (w/h/d)  
260 mm × 1,190 mm × 260  
mm (10 1/4 in × 46 7/8 in ×  
10 1/4 in) (w/h/d) (whole  
speaker)  
Mass (approx.)  
3.9 kg (8 lb 9 5/8 oz) (with  
speaker cord)  
Mass (approx.)  
1.2 kg (2 lb 10 3/8 oz) (wall-  
mounted part)  
2.9 kg (6 lb 6 1/4 oz) (with  
speaker cord and stand)  
Subwoofer (SS-WSB113) for BDV-E190  
Dimensions (approx.)  
177 mm × 280 mm × 245  
mm (7 in × 11 1/8 in ×  
9 3/4 in) (w/h/d)  
2.7 kg (5 lb 15 1/4 oz) (with  
speaker cord)  
Front/Surround (SS-TSB118) for BDV-E390/  
BDV-E385/BDV-E290/BDV-T39  
Mass (approx.)  
Surround (SS-TSB118) for BDV-E490  
Dimensions (approx.)  
95 mm × 210 mm × 93 mm  
(3 3/4 in × 8 3/8 in ×  
3 3/4 in) (w/h/d)  
Front:  
Mass (approx.)  
0.54 kg (1 lb 3 oz) (with  
speaker cord)  
Surround:  
US  
55  
General  
Power requirements  
120 V AC, 60 Hz  
Power consumption  
BDV-E490/BDV-E390/BDV-E385/BDV-E290/  
BDV-T39  
On: 130 W  
Standby: 0.3 W (at the  
Power Saving mode)  
On: 95 W  
BDV-E190  
Standby: 0.3 W (at the /  
Power Saving mode)  
430 mm × 50 mm × 275  
mm (17 in × 2 in ×  
10 7/8 in) (w/h/d) incl.  
projecting parts  
Dimensions (approx.)  
Mass (approx.)  
2.8 kg (6 lb 2 3/4 oz)  
Design and specifications are subject to change  
without notice.  
• Standby power consumption 0.3W.  
• Over 85% power efficiency of amplifier block is  
achieved with the full digital amplifier, S-Master.  
US  
56  
Language Code List  
The language spellings conform to the ISO 639: 1988 (E/F) standard.  
Parental Control/Area Code List  
US  
57  
   
Index  
Numerics  
R
G
Registered Media Remote  
Devices 45  
A
H
Reset to Factory Default  
Settings 45  
HDMI  
I
Initialize Personal Information  
45  
S
Internet Video Parental Control  
43  
B
BD Hybrid Disc Playback  
Layer 43  
Software License Information  
44  
L
M
Media Remote Device  
Registration 45  
Super Audio CD Playback  
Channel 43  
C
Super Audio CD Playback  
Layer 43  
N
Network Connection  
Diagnostics 44  
T
TV Screen Size Setting for 3D  
41  
O
D
U
P
W
E
Q
F
US  
58  
 
The software of this system may be updated in the future. To find out details on any  
available updates, please visit the following URL.  
(1)  
©2012 Sony Corporation  
Printed in Malaysia  

Westcott 1815 User Manual
Weil McLain CG Series 11 User Manual
U Line 2275DWRWOL User Manual
Tiffen Provista F12 User Manual
Sony Handycam Vision CDD TRV78E User Manual
Sony Handycam DCR SR77E User Manual
Sony DCR SR62E User Manual
Silva Boating Equipment 100p User Manual
Silva Boating Equipment 70p User Manual
Samsung VP D 130 i User Manual