user GuIDe
-
pro hD
WELCOmE!
Thank you for purchasing the Slingbox PrO-HD. Follow these instructions to connect
your new Slingbox and to start watching yourTV programs almost anywhere.
If you run into any problems along the way, visit our support web site where you
can find video tutorials, technical articles and ways to contact Sling for help:
:
WHAT’S IN THE BOX
-
User guide
Slingbox PrO HD
audio and Video (aV) accessories
-
Component
Video Cable
Composite
aV Cable
Stereo
audio Cable
Coax
Cable
S Video
Cable
Power and network accessories
3
Power adapter
Ethernet Cable
remote Control Ir Cable
1
HERE'S WHAT YOU CAN CONNECT TO
:
YOUR SLINGBOX
The Slingbox PrO-HD supports connecting up to three audio/video sources:
• One high definition (HD) device using component cables for video. You can
use either analog or digital cables for audio.
• One standard definition (SD) device using composite cables for audio and
video. If your a/V device has S-Video, you can use an S-Video cable for video.
• One coaxial (COAX) device. Use a coaxial cable for both audio and video.
Choose the highest quality connection that each a/V source has available. If you
have two devices that use the same kind of connection, connect the one that
you watch most often.
NOTE:THE SLINGBOX PRO-HD SUPPORTS RESOLUTIONS UPTO
1080i. IF YOUR A/V SOURCE OUTPUTS 1080p, YOU MUST SET ITTO
1080i . THE SLINGBOX WILL NOT WORK WITH 1080p.
TIP:your Slingbox comes with component, composite, and coaxial cables to pass-
through connections to yourTV or set top box. Use the highest quality connection that
yourTV has available.
2
:
BEFORE YOU BEGIN SETUP
To make the setup process easier, write down the type, brand and model of the
a/V sources, along with information about your home network. This will come in
handy when you configure the software later on.
-
HD High Definition Source
:
:
SOUrCETyPE [Ex Digital Video recorder (DVr)]
:
:
branD [Ex Dish network]
:
:
MODEL [Ex ViP722]
-
SD Standard Definition Source
:
:
SOUrCETyPE [Ex Video Cassette recorder (VCr)]
:
branD
:
MODEL
-
COAX Coaxial Source
:
:
SOUrCETyPE [Ex CableTV]
:
branD
:
MODEL
Network Information
:
rOUTEr branD anD MODEL
:
MODEM branD anD MODEL
:
InTErnET SErVICE PrOVIDEr (ISP)
:
:
TyPE OF InTErnET SErVICE [Ex DSL]
3
:
STEP 1 CONNECT YOUR HD SOURCE
:
VIDeo
If you have a high-definition device, you can connect it to
your Slingbox with the included component video cables.
Component video cables have a set of green, blue and red
connectors. Connect these cables to the component jacks
labeled In on your Slingbox PrO-HD. These jacks are in the top
row on the back of your Slingbox. Connect the other ends of
the component cables to the output component jacks on your
HD video source
.
If your HD a/V source is already connected to yourTV with
component cables, disconnect them from theTV and then
re-connect these cables to the component In jacks on your
Slingbox. Use the matching cable set included with your
Slingbox to connect to the component OUT jacks on the back of
your Slingbox, and then to the In jacks yourTV.
NOTE:THE SLINGBOX PRO-HD SUPPORTS RESOLUTIONS UP
TO 1080i. IF YOUR A/V SOURCE OUTPUTS 1080p, YOU MUST
SET ITTO 1080i . THE SLINGBOX WILL NOT WORK WITH 1080p.
4
:
AuDIo
analog audio connectors are usually red and white. To connect
using analog audio, use the included stereo audio cable. The
red connector is for the right audio channel, and white is for the
left audio channel. Insert one end of these audio cables into the
jacks labeled In on your Slingbox PrO-HD. These jacks are also
in the top row on the back of your Slingbox. Insert the other
end into the audio output jacks on your a/V source. These jacks
are typically labeled aUDIO OUT.
:
TIP If your HD source has digital audio, connect it for
better sound. Digital audio connections are usually
orange. These connections are also called S/PDIF
(Sony/Philips Digital Interface) audio. Connect one end
of the S/PDIF audio cable (sold separately) to the orange
-
jack labeled In on your Slingbox PrO HD. Connect the
other end to the output S/PDIF audio jack on your a/V
source. These audio jacks are typically labeled DIgITaL
aUDIO OUT or S/PDIF OUT.
5
:
STEP 2 CONNECT YOUR SD SOURCE
:
VIDeo
If you have an SD (standard definition) a/V device, you can
connect it to your Slingbox using the included composite
cables. Composite cables have a yellow connector for video,
along with red and white connectors for audio. Insert the
yellow connector into the yellow composite jack labeled In on
your Slingbox PrO-HD. This jack is in the top row on the back of
your Slingbox. Connect the other end of this video cable to the
yellow video output jack on your SD video source
If your SD a/V source is already connected to yourTV with
composite cables, disconnect them from theTV and then
re-connect these cables to the composite In jacks on your
Slingbox. Use the matching cable set included with your
Slingbox to connect to the composite OUT jacks on the back of
your Slingbox, and then to the In jacks yourTV.
6
:
AuDIo
Composite cables also have red and white connectors for
audio. Insert the red connector into the red composite jack
labeled In on your Slingbox PrO-HD. These jacks are also in
the top row on the back of your Slingbox. Connect the other
end of this cable to the red output audio jack on your SD
source. repeat this process with the cable that has the white
connectors.
TIP: If your SD source has an S-Video jack, use it instead of the yellow
video connector to get higher quality video. Connect the S-Video cable to
the S-Video jack labeled IN on your Slingbox PRO-HD.
Connect the other end of the S-Video cable to the output
S-Video jack on your A/ V source. An S-Video connection
carries video but no sound, so connect the audio as
explained above. Use the red and white connectors that
are part of the included composite cables. You don’t
need to use the yellow connector if you have S-Video.
7
:
STEP 3 CONNECT YOUR COAX SOURCE
Coaxial cable carries both video and sound. They're used to
connect antennas or to some cableTV systems. Connect your
coaxial source to the jack labeled COax In on your Slingbox
PrO-HD
.
If your coaxial a/V source is already connected to yourTV with
a coaxial cable, disconnect it from theTV and then re-connect
this cable to the COax In jack on your Slingbox. Use the
matching cable included with your Slingbox to connect to the
COax OUT jack on the back of your Slingbox, and then to the
In jack yourTV.
8
:
STEP 4 ATTACH REMOTE CONTROL IR CABLE
Connect the remote control Ir cable to the Ir jack on the
Slingbox. next, place a remote control Ir cable head on the top
or bottom of your a/V device so it points at its Ir sensor.
Make sure that the head of the remote control
Ir cable extends out far enough over the front
your a/V device to send a signal to it. you may
want to affix the remote control Ir cables using
the adhesive pads after you've determined their
IR SENSOR SIDE VIEW
correct positions.
:
TIP The Ir sensor is on the front of your a/V device. Some sensors are behind
a dark, reddish plastic window. Others may be hidden behind the plastic on the
front of the device. If you don't see the sensor, shine a flashlight on the front of
the device and look for a small bulb similar to the one on the end of
the remote control Ir cable. To control more than one device, you
can use the multi-head remote control Ir cable that came with your
Slingbox PrO-HD. you can use one or more Ir heads per device as
needed.
9
:
STEP 5 LINK TO YOUR NETwORK
• Plug one end of the Ethernet cable into the Slingbox
nETWOrK jack.
• Connect the other end into your router.
The Slingbox works with almost any router with a high-speed
Internet connection or a broadband home network. you must
have a router to use the Slingbox.
:
TIP For best video performance, Sling Media recommends that you use wired
Ethernet to connect Slingbox PrO-HD to your home network. Wireless connections
may not be able to handle the large amount of information in a high-quality video
stream.
Is yourTV in a different room than your router? Use a SlingLinkTUrbO to avoid using
wireless connections. The SlingLinkTUrbO acts as an extension cord for the Internet
by using your home's existing electrical wiring to transmit the Ethernet signal. For
10
:
STEP 6 ATTACH THE pOwER ADApTER
• Connect the power adapter cable into the Slingbox
POWEr jack.
• Plug the power adapter into an electrical outlet.
WARNING:THE INCLUDED POWER SUPPLY IS FORTHE
-
SLINGBOX PRO HD. DO NOT USETHIS POWER SUPPLY
ONTHE SLINGBOX CLASSIC, THE SLINGBOX AV ORTHE
SLINGBOX PRO.
When plugged in, the power light comes on, and the lights
blink a few times as the Slingbox starts up. The network light
will remain on while your Slingbox is successfully connected to
your network. both the power and network lights should be on
and not blinking.
TIP: If the network light does not come on within 30 seconds,
make sure that you have correctly connected the Slingbox to your
network router. Check the connectors to see that they are firmly
inserted. If the network light still does not come on, try resetting
your Slingbox by holding down the reset button on the back for 10
seconds. When you let go of the button, the network light should
come on. SeeTroubleshooting on page 13 for more solutions, or
NETWORK
POWER
11
:
STEP 7 INSTALL THE SOFTwARE
now that you have the Slingbox connected, you’re ready to install the
software. before you do, make sure that your computer is on the same
network as your Slingbox.
the instructions to download the latest software to your
PC or Mac. Once you've downloaded the software, follow
the onscreen instructions to install SlingPlayer™ and to
configure your Slingbox. Configure your Slingbox on your
computer before you install SlingPlayer Mobile on your
*
PDa, mobile phone, or smart phone.
:
STEP 8 ENJOY YOUR SLINgBOX!
Congratulations! now that you've set up everything, you're now ready to enjoy
*
watching yourTV on your PC, Mac or mobile phone - at home or 3,000 miles
-
away - via the Internet. Thanks for buying the Slingbox PrO HD.
*To watch your Slingbox on your mobile phone you must purchase SlingPlayer Mobile software separately.
There are versions of SlingPlayer Mobile specific to many PDas, mobile phones, and smart phones. Visit
SlingPlayer Mobile.
12
TROUBLESHOOTING
NETWORK
POWER
1. If the power light is not on:
Disconnect the power cable from both the Slingbox and the electrical outlet and
reconnect them - making sure that they are secure.
2. If the network light is not on:
Disconnect the Ethernet cable from the back of the Slingbox and re-insert it. you
will hear a click when it is fully inserted.
Do the same with the other end of the Ethernet cable, making sure that it is
attached to your router.
Make sure that your router is on the same home network as your Slingbox.
3. If the network light is continuously blinking:
Press and hold the reset button on the back of the Slingbox for 10 seconds. The
lights on the front of the Slingbox quickly flash from left to right, and then flash
slowly. This resets the Slingbox to factory settings. If you've already configured
your Slingbox using SlingPlayer, you'll need to go through the setup assistant again
after you reset your Slingbox.
Turn your router off and back on again. note: Most routers do not have on/off
switches. you may need to unplug and plug the router back into the electrical
outlet.
4. If the SlingPlayer software does not discover the Slingbox on your network:
Some firewall security software blocks the Slingbox from being recognized on
your home network. If this occurs, you need to change your security
software settings to see the Slingbox as a device on your network.
5. If you don’t see your audio/video source while installing the SlingPlayer software:
re-check the cable connections between your a/V devices and the Slingbox.
Make sure that the cables are fully inserted into the connectors on the back of the
Slingbox and your a/V devices. The cables should fit snugly.
6. If the SlingPlayer application is not controlling your A/V source:
Make sure the remote control Ir cable is fully inserted. Move the Ir emitters to a
different location on the front of your cable/satellite box or DVr.
7. If yourTV is no longer receiving a signal:
Connect the output of the Slingbox to yourTV's inputs. Make sure yourTV is set to
the correct input. For example, if your Slingbox is connected to yourTV's InPUT 1
jacks, change the input setting to InPUT 1.
Turn your router off and back on again. note: Most routers do not have on/off
switches. you may need to unplug and plug the router back into the electrical
outlet.
NEED MORE HELP?
go to support.slingmedia.com
13
TECHNICAL SPECIFICATIONS
:
SLINGBOX PRO-HD (US/CAN) SPECIFICATIONS
Dimensions (unit only)
Weight (unit only)
Power requirements
Inputs
13.25” (w) x 5.63” (d) x 2.38” (h)
4 lbs.
5V/4a
rCa type audio (Lr)
S/PDIF audio
Component video (rCa type)
Composite video (rCa type)
Coaxial input
Outputs
rCa type audio (Lr)
S/PDIF audio
Component video (rCa type)
Composite video (rCa type)
Coaxial output
Source Control
network
Ir emitter
10/100 base-T Ethernet rJ-45
(3) front panel LEDs:
•Status
Display
•Network
•Power
:
SLINGBOX PRO-HD POWER ADAPTER (US/CAN)
Make
Ktec
Model number
Input Voltage range
Input Frequency range
Input Current
KSaFF0500400W1US
100VaC to 240VaC
50 Hz to 60 Hz
0.8a Max
Output Voltage
Output regulation
Output Load range
+5V
4.6~5.4V
0~4.0a
14
WARRANTY, SAFETY, REGULATORY, AND
LEGAL INFORmATION
sling Media, Inc. - slingbox
Limited Warranty and Non-Warranty returns policy
Limited Warranty:
What Does This Warranty Cover? This warranty only covers defects in Slingbox
hardware products purchased from Sling Media authorized resellers.
how Long Does the Coverage Last? your Slingbox hardware product is
warranted to be free of defects for one (1) year from the original date of
purchase.
What will sling Media Do? If your Slingbox hardware product is defective,
Sling Media will repair or replace it with the same product, or another
product with similar features.
how Do You Get Warranty service? Please contact the Sling Media technical
-
-
-
support team at 1 877 gO SLIng (option #4) to verify eligibility. Once the
Sling Media technical support agent determines that your eligible Slingbox
product is defective, that agent will provide you with a return Material
authorization (rMa) number and the address of the Sling Media returns
Center. returns sent to the Sling Media returns Center or to the corporate
offices without an rMa number will be rejected.
Upon receipt at Sling Media’s designated returns Center, Sling Media will
service the original Slingbox hardware product and use reasonable efforts
to send it, or the replacement product, to you within 10 business days.
repaired or replacement products will be shipped back to you at Sling
Media’s expense. you are responsible for costs to ship the original Slingbox
hardware product to Sling Media’s returns Center for repair or replacement.
What Does This Warranty Not Cover? you may only exercise this warranty
from the country in which you purchased your Slingbox hardware product.
Sling Media will not send repaired or replacement products to addresses
outside the country in which you purchased your Slingbox hardware product.
15
also, consequential and incidental damages are not recoverable under this
warranty. Some states do not allow the exclusion or limitation of incidental
or consequential damages, so the above limitation or exclusion may not
apply to you. Sling Media may charge for out-of-warranty service at a rate
of $150 (USD), which includes costs to ship the repaired or replacement
product to you.
any IMPLIED WarranTIES, InCLUDIng IMPLIED WarranTIES OF
MErCHanTabILITy anD FITnESS FOr a ParTICULar PUrPOSE, arE
LIMITEDTOTHE DUraTIOn OFTHE WarranTy STaTED abOVE (I.E. OnE
yEar FrOMTHE DaTE OF PUrCHaSE).
This warranty gives you specific legal rights, and you may also have other
rights which vary from state to state. To the maximum extent permitted by
law, Sling Media reserves the right to modify this warranty at any time.
16
Non-Warranty returns policy:
For products purchased at Sling Media’s online store:
If you purchased your Slingbox hardware product directly from Sling Media’s
online store and are dissatisfied, you may return it at your expense within 30
days from original shipment as long as it is in good condition.
Please contact the Sling Media Online Store billing support team at
-
-
1 877 gO SLIng (option #2) to obtain a return Material authorization (rMa)
number. Our agents will help you through the process through which
you can return your product. Products must be shipped to Sling Media’s
designated returns Center using a trackable shipping method, and packaged
appropriately for safe shipment. you are responsible for one-way shipping
charges.
returns sent to the Sling Media returns Center or to the corporate offices
without an rMa number will be rejected.
Upon receipt at the designated Sling Media returns Center, Sling Media
will refund the purchase price of your product (including tax). your original
shipping and handling costs will not be refunded.
For products purchased at a retail store:
If you purchased your product through a retail location (online or in person),
you may be eligible for a full credit in accordance with the retailer’s return
policy. you should contact the retail location where you purchased the
product, as return policies vary. Sling Media cannot accept product returns
for products purchased through a retail location.
17
Important safety Instructions
Please read all of these instructions and retain for future reference.
Follow all warnings and instructions.
• Do not use a Slingbox near water.
• Do not place the product near heat sources such as direct sunlight,
radiators, heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
• Do not block the ventilation holes on the Slingbox. A Slingbox requires
adequate ventilation. Do not place a Slingbox in a cabinet or built-
in installation unless sufficient ventilation is provided. Do not place
anything on top of a Slingbox, including another Slingbox.
• Operate this product from the type of power source indicated on the
marking label.
• Route power cables so they are not likely to be walked on, rolled
over, or pinched by items placed upon or against them, or otherwise
subject to abuse, paying particular attention to cords at plugs,
convenience receptacles, and the point where they exit from the
product.
• Never push objects of any kind into this product through openings as
they may touch dangerous voltage points or short-out parts that could
result in a fire or electric shock. never spill liquid of any kind on the
product.
• Unplug a Slingbox before cleaning. Use only a dry cloth to clean the
Slingbox.
• Do not place this product on an unstable cart, stand, tripod, bracket,
or table.
18
Lightning
For added protection of this product during a lightning storm, or when it is
left unattended and unused for long periods, unplug it from the wall outlet.
servicing
Do not attempt to service this product yourself, as opening or removing
covers may expose you to dangerous voltage or other hazards. refer
all servicing to qualified service personnel. Contact your local office for
servicing information.
Damage requiring service
Unplug this product from the wall outlet and refer servicing to qualified
service personnel under the following conditions:
• When the power-supply cord or plug is damaged.
• If liquid has been spilled, or objects have fallen into the product.
• If the product has been exposed to rain or water.
• If the product does not operate normally by following the operating
instructions. adjust only those controls covered by the operating
instructions. an improper adjustment of other controls may result in
damage and will often require extensive work by a qualified technician to
restore the product to its normal operation.
• If the product has been dropped or damaged in any way.
• When the product exhibits a distinct change in performance.
replacement parts
When replacement parts are required, be sure the service technician has
used replacement parts specified by the manufacturer or parts that have
the same characteristics as the original part. Unauthorized substitution may
result in fire, electric shock or other hazards.
safety check
Upon completion of any service or repairs to this product, ask the service
technician to perform safety checks to determine that the product is in
proper operating condition.
19
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated “dangerous voltage” within the
product’s enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended
to alert the user to the presence of important operating
and maintenance (servicing) instructions in the literature
accompanying the product.
WARNING:
To reduce the risk of fire or electric
shock, do not expose this product
to rain or moisture.
Note to CATV Installer:
This reminder is provided to call the CaTV system installer’s attention to
section 820-40 of the nEC, which provides guidelines for proper grounding
and, in particular, specifies that the cable ground shall be connected to the
grounding system of the building, as close to the point of cable entry as
practical.
20
environmental Information
This symbol indicates that your Slingbox must be disposed of
properly according to local laws and regulations. When your
Slingbox reaches its end of life, contact your local authorities
to learn about recycling options.
Sling Media cares about the environment. Some of our packaging materials
are made from recycled paper and all of our packaging is designed to be
recycled.
Federal Communications Commission Notices
This device complies with Part 15 of the FCC rules. Operation is subject
to the following two conditions: (1)This device may not cause harmful
interference and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a
class b digital device, pursuant to part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses and can radiate
radio frequency energy and if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
21
This equipment has been certified to comply with the limits for a class b
computing device, pursuant to FCC rules. Operation with non-approved
equipment or cables is likely to result in interference to radio andTV
reception. The user is cautioned that changes and modifications made to
the equipment without the approval of manufacturer could void the user’s
authority to operate this equipment.
This Class b digital apparatus meets all requirements of the Canadian
Interference-Causing Equipment regulations. Cet appareil numerique de
la classe b respecte toutes les exigences du reglement sur le materiel
brouilleur du Canada.
22
Legal Notices
soundTouch
SlingPlayer software uses the SoundTouch Sound Processing Library
SoundTouch Library Copyright © Olli Parviainen 2001-2005.
Microsoft
This product includes technology owned by Microsoft Corporation and
under a license from Microsoft Licensing, gP. Use or distribution of such
technology outside of this product is prohibited without a license from
Microsoft Corporation and/or Microsoft Licensing, gP as applicable.
zConf
SlingPlayer software uses Dynamic Linked Library, Copyright zConf, LLC.
Dolby Laboratories
This product contains one or more programs protected under international
and U.S. copyright laws as unpublished works. They are confidential and
proprietary to Dolby Laboratories. Their reproduction or disclosure, in whole
or in part, or the production of derivative works there from without the
express permission of Dolby Laboratories is prohibited. Copyright 1993-2002
by Dolby Laboratories. all rights reserved. Manufactured under license from
Dolby Laboratories.
23
NOTES:
24
25
-
pro hD
|