Sharp Blu ray Player BD HP25U User Manual

MODEL  
BD-HP25U  
BLU-RAY DISC/DVD PLAYER  
OPERATION MANUAL  
IMPORTANT SAFETY INSTRUCTIONS  
Electricity is used to perform many useful functions, but it can also cause personal  
Additional Safety Information  
injuries and property damage if improperly handled. This product has been engineered  
and manufactured with the highest priority on safety. However, improper use can result  
in electric shock and/or fire. In order to prevent potential danger, please observe the  
following instructions when installing, operating and cleaning the product. To ensure  
your safety and prolong the service life of your Blu-ray Disc/DVD Player, please read the  
following precautions carefully before using the product.  
1) Read these instructions.  
2) Keep these instructions.  
3) Heed all warnings.  
4) Follow all instructions.  
5) Do not use this apparatus near water.  
6) Clean only with dry cloth.  
7) Do not block any ventilation openings. Install in accordance with the manufacturer’s  
instructions.  
8) Do not install near any heat sources such as radiators, heat registers, stoves, or  
other apparatus (including amplifiers) that produce heat.  
9) Do not defeat the safety purpose of the polarized or grounding-type plug. A  
polarized plug has two blades with one wider than the other. A grounding type plug  
has two blades and a third grounding prong. The wide blade or the third prong are  
provided for your safety. If the provided plug does not fit into your outlet, consult an  
electrician for replacement of the obsolete outlet.  
15) Power Sources—This product should be operated only from the type of power  
source indicated on the marking label. If you are not sure of the type of power  
supply to your home, consult your product dealer or local power company. For  
products intended to operate from battery power, or other sources, refer to the  
operating instructions.  
16) Overloading—Do not overload wall outlets, extension cords, or integral convenience  
receptacles as this can result in a risk of fire or electric shock.  
17) Object and Liquid Entry—Never push objects of any kind into this product through  
openings as they may touch dangerous voltage points or short-out parts that could  
result in a fire or electric shock. Never spill liquid of any kind on the product.  
18) Damage Requiring Service—Unplug this product from the wall outlet and refer  
servicing to qualified service personnel under the following conditions:  
a) When the AC cord or plug is damaged,  
b) If liquid has been spilled, or objects have fallen into the product,  
c) If the product has been exposed to rain or water,  
d) If the product does not operate normally by following the operating  
instructions.  
e) Adjust only those controls that are covered by the operating instructions as  
an improper adjustment of other controls may result in damage and will often  
require extensive work by a qualified technician to restore the product to its  
normal operation,  
10) Protect the power cord from being walked on or pinched particularly at plugs,  
convenience receptacles, and the point where they exit from the apparatus.  
11) Only use attachments/accessories specified by the manufacturer.  
12) Use only with the cart, stand, tripod, bracket, or table specified by the  
manufacturer, or sold with the apparatus. When a cart is used, use caution when  
moving the cart/apparatus combination to avoid injury from tip-over.  
13) Unplug this apparatus during lightning storms or when unused for long periods of  
time.  
14) Refer all servicing to qualified service personnel. Servicing is required  
when the apparatus has been damaged in any way, such as power-  
supply cord or plug is damaged, liquid has been spilled or objects have  
fallen into the apparatus, the apparatus has been exposed to rain or  
moisture, does not operate normally, or has been dropped.  
f) If the product has been dropped or damaged in any way, and  
g) When the product exhibits a distinct change in performance - this indicates a  
need for service.  
19) Replacement Parts—When replacement parts are required, be sure the service  
technician has used replacement parts specified by the manufacturer or have the  
same characteristics as the original part. Unauthorized substitutions may result in  
fire, electric shock, or other hazards.  
20) Safety Check—Upon completion of any service or repairs to this product, ask the  
service technician to perform safety checks to determine that the product is in  
proper operating condition.  
21) Wall or ceiling mounting—When mounting the product on a wall or ceiling, be sure  
to install the product according to the method recommended by the manufacturer.  
22) The main AC plug is used as disconnect device and shall always remain readily  
operable.  
2
IMPORTANT SAFETY INSTRUCTIONS  
• Water and Moisture—Do not use this product near  
• Heat—The product should be situated away from  
water - for example, near a bath tub, wash bowl,  
kitchen sink, or laundry tub; in a wet basement; or  
near a swimming pool; and the like.  
heat sources such as radiators, heat registers, stoves,  
or other products (including amplifiers) that produce  
heat.  
• Stand—Do not place the product on an unstable  
cart, stand, tripod or table. Placing the product on an  
unstable base can cause the product to fall, resulting  
in serious personal injuries as well as damage to the  
product. Use only a cart, stand, tripod, bracket or  
table recommended by the manufacturer or sold with  
the product. When mounting the product on a wall,  
be sure to follow the manufacturer’s instructions. Use  
only the mounting hardware recommended by the  
manufacturer.  
• Lightning—For added protection for this product  
during a lightning storm, or when it is left unattended  
and unused for long periods of time, unplug it from  
the wall outlet. This will prevent damage to the  
product due to lightning and power-line surges.  
To prevent fire, never place any type of candle or  
flames on the top or near the product.  
To prevent fire or shock hazard, do not expose this  
product to dripping or splashing.  
• No objects filled with liquids, such as vases, should  
be placed on the product.  
• Selecting the location—Select a place with no direct  
sunlight and good ventilation.  
To prevent fire or shock hazard, do not place the AC  
cord under the product or other heavy items.  
• Ventilation—The vents and other openings in the  
cabinet are designed for ventilation. Do not cover  
or block these vents and openings since insufficient  
ventilation can cause overheating and/or shorten the  
life of the product. Do not place the product on a bed,  
sofa, rug or other similar surface, since they can block  
ventilation openings. This product is not designed  
for built-in installation; do not place the product in an  
enclosed place such as a bookcase or rack, unless  
proper ventilation is provided or the manufacturer’s  
instructions are followed.  
3
PRECAUTIONS  
Precautions on viewing stereoscopic 3D images  
Notes on using Wireless LAN  
• Do not view stereoscopic 3D images if you have a history of photosensitivity, heart  
disease or poor health. This may cause the symptoms to worsen.  
• If you experience any health problems such as fatigue and discomfort while viewing  
stereoscopic 3D images, immediately discontinue viewing. Continuing viewing after  
symptoms appear may cause health risks. Take a break until the symptoms have  
completely disappeared.  
• When this player is connected to a wireless LAN network, transmissions between  
the wireless LAN components inside this player and a wireless LAN compatible  
broadband router (commercially available) are carried out.  
Precautions on using Wireless LAN  
• The following devices, radio stations, etc. use the same frequency bands. Do not use  
wireless LAN near them.  
• Ages of 5–6 or over are recommended for viewing stereoscopic 3D images.  
Symptoms such as fatigue and discomfort are difficult to determine in young  
children, therefore they may suddenly become ill. When viewing 3D images with  
children, please watch for eye strain symptoms.  
• When viewing stereoscopic 3D images, take a moderate break after watching one  
title. Viewing for extended periods may cause visual strain.  
Manufacturing/scientific/diagnostic equipment such as pacemakers, etc.  
Specified low power radio stations (radio stations that do not require a license)  
If this player is used near these devices, there is a possibility that radio wave  
interference may occur. Therefore transmission may not be possible or speed may be  
reduced.  
• Mobile phones, radios, etc. use different radio frequency bands from wireless LAN,  
so there will not be any effect on the transmissions of these devices or wireless LAN  
if this player is used near them.  
However, if a wireless LAN product is placed near one of these devices, audio or  
video noise may occur due to the electromagnetic waves that emit from wireless LAN  
products.  
• Radio waves will pass through the wood, glass, etc. used in standard housing,  
however they will not pass through reinforcing bars, metal, concrete, etc. Radio  
waves will not pass through walls and floors if these materials are used.  
Precautions when cleaning this product  
Turn off the main power and unplug the AC cord from the wall outlet before handling.  
To clean the outer cabinet, periodically wipe it with a soft cloth (cotton, flannel, etc.).  
• For severe dirt, soak a soft cloth (cotton, flannel, etc.) in some neutral detergent  
diluted with water, wring the cloth out thoroughly, wipe off the dirt, then wipe again  
with a soft, dry cloth.  
• Do not use chemicals or a chemically treated cloth for cleaning. It may damage the  
cabinet finish.  
4
DEAR SHARP CUSTOMER  
Thank you for your purchase of the SHARP Blu-ray Disc/DVD Player. To ensure safety and many years of trouble-free operation of your product, please read  
the Important Safety Instructions carefully before using this product.  
Getting Started  
Step 1: Unpacking  
Step 2: Selecting equipment to connect  
Make sure the following accessories are provided with the product.  
Connection varies with the equipment used. Refer to Connection  
(Pages 16–19).  
Turn off the devices before connecting.  
Remote control unit  
AC cord  
Enjoying BD-LIVE and video on demand services (e-Contents)  
To enjoy BD-LIVE content or video on demand streaming content on your TV,  
after an Internet connection is made, communication setup is required. Refer  
to “Communication Setup” (Pages 46–49).  
Step 3: Playing back video/picture/music content  
Play back video, picture or music content from the desired media source  
such as Blu-ray and DVD discs, or via the Internet.  
Refer to Playback (Pages 20–39) and video on demand streaming content  
(Pages 55–56).  
Page 20  
“AA” size battery (g2)  
Step 4: Adjust settings to suit your preference  
Adjust settings to enjoy various features and other functions for playing  
discs/content.  
Refer to Settings (Pages 40–54).  
Page 20  
Pages 15 and 20  
Optional accessories  
Wireless LAN adapter  
VR-WL25  
5
Contents  
Operating a SHARP TV Using the Remote Control.................................................... 22  
TV function control................................................................................................. 22  
Turning Off the LCD Backlight and Indications .......................................................... 22  
Using AQUOS LINK.................................................................................................... 23  
Controlling the Blu-ray disc player using AQUOS LINK ........................................ 23  
Using 3D..................................................................................................................... 23  
Control Panel.............................................................................................................. 24  
Video/Picture/Music Playback.........................................................................25  
Loading a Disc............................................................................................................ 25  
BD/DVD Video Playback............................................................................................. 25  
Displaying the disc information.............................................................................. 26  
BD/DVD Menus .......................................................................................................... 26  
Start playback by selecting a title from the top menu ........................................... 26  
Using the disc menu .............................................................................................. 26  
Using the pop-up menu......................................................................................... 27  
Enjoying BONUSVIEW or BD-LIVE............................................................................. 27  
Use of Picture in Picture function (secondary audio/video playback) ................... 28  
Virtual Package ...................................................................................................... 28  
BD-LIVE ................................................................................................................. 28  
DVD-R/-RW (VR format) / BD-RE/-R (BDAV format) Playback................................... 29  
Playback by selecting a title .................................................................................. 29  
Playback by selecting a chapter............................................................................ 30  
Sorting the titles..................................................................................................... 30  
Playback by selecting a Playlist............................................................................. 30  
Playback from the beginning or resume playback................................................. 30  
Audio CD Playback..................................................................................................... 31  
Playback from the beginning ................................................................................. 31  
Playback by selecting a track ................................................................................ 31  
Operation procedure for the “Functions” menu..................................................... 31  
Audio Data (MP3 File) Playback ................................................................................. 32  
Displaying Still Images (JPEG files)............................................................................ 33  
Accessing DLNA servers............................................................................................ 34  
Playback by selecting a file list.............................................................................. 34  
Playback Functions...........................................................................................35  
Fast Forward/Reverse (Search) .................................................................................. 35  
Skipping to the Next or the Start of the Current Chapter (Track/Title) ....................... 35  
Pause/Frame Advance Playback................................................................................ 35  
Slow Playback (Forward/Reverse).............................................................................. 35  
Repeat Playback of a Title or Chapter (Repeat Playback) ......................................... 36  
Partial Repeat Playback (Repeat Playback of a Specified Part)................................. 36  
Displaying the Audio Information ............................................................................... 37  
Switching Subtitles..................................................................................................... 37  
Switching the Angle.................................................................................................... 37  
Displaying the Angle Mark.......................................................................................... 37  
Settings During Playback .................................................................................38  
Function Control......................................................................................................... 38  
Function control operation procedure ................................................................... 38  
Functions which can be set ................................................................................... 39  
Introduction  
SAFETY INFORMATION ......................................................................................1  
IMPORTANT SAFETY INSTRUCTIONS..............................................................2  
PRECAUTIONS ....................................................................................................4  
DEAR SHARP CUSTOMER .................................................................................5  
Getting Started ....................................................................................................5  
Contents...............................................................................................................6  
What would you like to do with this Player?.....................................................8  
About Media Types..............................................................................................9  
Blu-ray Disc.................................................................................................................. 9  
Types of Discs/Media Formats that Can Be Used with This Player ............................. 9  
Discs that Cannot Be Used with This Player.............................................................. 10  
About Disc Contents .................................................................................................. 11  
BD Video ................................................................................................................ 11  
Title, Chapter and Track......................................................................................... 11  
Icons Used on BD/DVD Video Disc Cases ............................................................ 12  
The Icons Used in This Operation Manual ................................................................. 12  
Important Information.......................................................................................13  
Disc Precautions......................................................................................................... 13  
License and Copyright ............................................................................................... 13  
Major Components............................................................................................14  
Main Unit (Front)......................................................................................................... 14  
Main Unit (Rear).......................................................................................................... 14  
Remote Control Unit................................................................................................... 15  
Connection  
Connecting to a TV/projector...........................................................................16  
Connecting to an amplifier/AV receiver ..........................................................17  
HDMI connection........................................................................................................ 17  
Digital audio connection............................................................................................. 17  
Broadband Internet Connection ......................................................................18  
Wired connection (LAN cable).................................................................................... 18  
Wireless connection (wireless LAN)............................................................................ 19  
Playback  
Before Starting Playback..................................................................................20  
Loading the Batteries in the Remote Control............................................................. 20  
Approximate operating range of remote control.................................................... 20  
Connecting the Power Cord....................................................................................... 20  
Turning the Power On................................................................................................. 21  
Turning the power on ............................................................................................. 21  
Entering standby.................................................................................................... 21  
Indicators on the Player ......................................................................................... 21  
Language Setting ....................................................................................................... 22  
Changing the on-screen display language ............................................................ 22  
6
Contents  
Settings  
What to do first:  
SETTINGS...........................................................................................................40  
Common operations................................................................................................... 40  
Basic Operation for Playback Setting ........................................................................ 41  
Audio Video Settings .................................................................................................. 42  
Smart Settings............................................................................................................ 43  
AQUOS LINK.............................................................................................................. 43  
Playback Setting......................................................................................................... 44  
On Screen Language.................................................................................................. 45  
Version........................................................................................................................ 45  
System........................................................................................................................ 45  
Communication Setup................................................................................................ 46  
Sets whether “Cable” or “Wireless” is used for the network connection .............. 46  
When selecting Cable ............................................................................................ 46  
When selecting Wireless........................................................................................ 47  
The operation procedure for inputting characters manually.................................. 49  
USB Memory Management........................................................................................ 50  
Software Update Settings .......................................................................................... 51  
Auto Update from Network.................................................................................... 51  
Manual Update from Network................................................................................ 52  
Manual Update from USB memory device ............................................................ 52  
Refer to “Getting Started” (p. 5) to prepare for using this  
player.  
Introduction (pp. 1–15)  
Explains the important operation information.  
Connection (pp. 16–19)  
Shows the connecting options provided by this Player.  
Playback (pp. 20–39)  
Shows simple playback and useful functions.  
Streaming content  
Playing back video on demand streaming content........................................55  
Instantly Watching Movies from Netflix...................................................................... 55  
Playing back YouTube content ................................................................................... 55  
Enjoying Movies and Internet Application with VUDU ............................................... 56  
Settings (pp. 40–54)  
Gives you more options to suit your circumstances.  
Appendix  
Troubleshooting.................................................................................................57  
To Reset this Player................................................................................................ 60  
On-screen Error Messages ..............................................................................61  
Specifications ....................................................................................................62  
Glossary .............................................................................................................63  
Network Service Disclaimer.............................................................................66  
About Software License....................................................................................67  
LIMITED WARRANTY........................................................................................68  
Streaming content (pp. 55–56)  
Shows the Internet streaming services available with this  
player.  
Appendix (pp. 57–69)  
Provides troubleshooting tips and more information.  
The illustrations and on-screen displays in this operation manual  
are for explanation purposes and may vary slightly from the  
actual operations.  
7
What would you like to do with this Player?  
Watch high quality movies on Blu-ray discs  
Enjoy BD-LIVE functions through the Internet  
This Player is compatible with BD-LIVE. You can enjoy bonus content such  
as movie trailers through the Internet when playing back BD-Video discs  
compatible with BD-LIVE.  
This Player offers full high-definition Blu-ray disc playback.  
Video/Picture/Music Playback (p. 25)  
Enjoying BONUSVIEW or BD-LIVE (pp. 27–28)  
Enjoy stereoscopic and powerful 3D images  
This player can play 3D content from 3D compatible Blu-ray discs through  
an HDMI cable. To watch 3D images, connect a 3D compatible TV to this  
player using an HDMI cable and play the 3D content while wearing 3D  
glasses.  
Enjoy video on demand streaming content with higher  
image quality on your TV  
This player supports video on demand streaming services using the  
Internet. By connecting this player to the Internet, you can enjoy various  
content streamed on your TV. Also, with this player’s “Super Picture”  
function, you can enjoy video streaming images with higher image quality.  
Using 3D (p. 23)  
Playing back video on demand streaming content (pp. 55–56)  
Super Picture (p. 43)  
Enjoy different kinds of media sources  
Use this player to enjoy video, picture or music content from various types  
of media sources such as DVDs, USB memory devices and via the Internet.  
About Media Types (pp. 9–12)  
Video/Picture/Music Playback (p. 25)  
Access to videos, pictures and music from home network  
servers  
This player can play back video, picture and music data stored on your  
home network servers such as a DNLA certified PC.  
Simple connection and operation through HDMI  
This Player is equipped with an HDMI terminal. You can connect it to the TV  
using HDMI and no other cable will be needed to enjoy movies. If your TV is  
compatible with AQUOS LINK, you can control both the TV and this Player  
with simple operations.  
Accessing DNLA servers (p. 34)  
Connecting to a TV/projector (p. 16)  
8
About Media Types  
Recording  
Format  
Disc  
Size  
Media Format  
Recording Format  
Contents  
Blu-ray Disc  
Disc Type  
Contents  
USB memory  
device  
DivX+HD  
Audio + Video  
(Movie)  
Blu-ray Disc is the ultimate next generation optical  
media format, offering the following key features:  
• Largest capacity (25 GB single layer – 50 GB dual layer)  
– with over 5 times the amount of content possible with  
current DVDs, particularly well suited for high definition  
feature films with extended levels of interactive features  
• Pristine picture quality with the capability for full high  
definition 1920 x 1080p resolution  
• Best audio possible with uncompressed surround sound  
(higher quality than even theater audio)  
• Broadest industry support – ensuring more choice for  
consumers in the marketplace  
• Hardware products will be backward compatible with  
DVDs, allowing continued enjoyment of existing DVD  
libraries.  
• Disc Durability – new breakthroughs in hard coating  
technologies gives Blu-ray Discs the strongest  
resistance to scratches and finger prints.  
BD  
Region  
Video code A/ALL  
Audio  
+ Video  
(Movie)  
12 cm  
(5”)  
Still image  
(JPEG file)  
JPEGJ  
MP3K  
Audio  
BD-RE DL  
BD-R DL  
BDMV/BDAV  
format  
• BD/DVD video players and discs have region codes,  
which dictate the regions in which a disc can be played.  
This Player’s region code is A for BD and 1 for DVD.  
(Discs marked ALL will play in any player.)  
• BD/DVD video operations and functions may be  
different from the explanations in this manual and  
some operations may be prohibited due to disc  
manufacturer’s settings.  
• If a menu screen or operating instructions are displayed  
during playback of a disc, follow the operating  
procedure displayed.  
• The audio component of a DVD video recorded at 96  
kHz (Linear PCM) will be output as 48 kHz audio during  
playback.  
DVD Region  
Video code  
1/ALL  
Video format  
Audio  
+ Video  
(Movie)  
12 cm  
(5”)  
8 cm  
(3”)  
ALL  
1
DVD+RW/DVD+R  
DVD-RW/DVD-R  
Video/VR/  
AVCHD  
DVD+R DL/DVD-R format  
Audio  
+ Video  
(Movie)  
12 cm  
(5”)  
8 cm  
(3”)  
DL  
(finalized disc  
only)  
DivX+HD  
Types of Discs/Media Formats that  
Can Be Used with This Player  
Still  
JPEGJ  
MP3K  
NOTE  
image  
(JPEG  
file)  
• Playback for some of the discs in the left side column  
tables may not be possible depending on the disc.  
• “Finalize” refers to a recorder processing a recorded  
disc so that it will play in other DVD players/recorders  
as well as this player. Only finalized DVD discs will play  
back in this player. (This player does not have a function  
to finalize discs.)  
• The following discs can be played back in this Player.  
Do not use an 8 cm (3”) to 12 cm (5”) adapter.  
• Use discs that conform to compatible standards as  
indicated by the presence of official logos on the disc  
label. Playback of discs not complying with these  
standards is not guaranteed. In addition, the image  
quality or sound quality is not guaranteed even if the  
discs can be played back.  
Audio  
Audio  
Audio CD  
(CD-DA)  
12 cm  
(5”)  
8 cm  
(3”)  
Audio CDI  
• Some discs cannot be played back depending on the  
recording format.  
CD-RW/CD-R  
Audio CD  
(CD-DA)  
Audio  
Still  
JPEGJ  
image  
(JPEG  
file)  
Audio  
MP3K  
DivX+HD  
Audio  
+ Video  
(Movie)  
9
About Media Types  
*3 About the MP3 file format  
The following CD-RW/R discs cannot be played.  
• Discs on which data has not been recorded cannot be  
played back.  
• Discs recorded in a format other than an Audio CD and  
JPEG/MP3 file format cannot be played back.  
• Discs may not be played back depending on their  
recording status or the status of the disc itself.  
• Discs may not be played back depending on their  
compatibility with this Player.  
Discs that Cannot Be Used with  
This Player  
MP3 files are audio data compressed in the  
MPEG1/2 Audio layer-3 file format. “MP3 files” have  
“.mp3” as extensions. (Some files that have “.mp3”  
extensions or files that have not been recorded in  
MP3 format will produce noise or cannot be played.)  
The following discs cannot be played back or will  
not play back properly on this Player. If such a  
disc is mistakenly played back, speaker damage  
may occur. Never attempt to play back these  
discs.  
Playing the MP3 file format  
• The MP3 files are not played in the order they were  
recorded.  
• It is recommended to record data at a lower speed as  
data recorded at a fast speed can produce noise and  
may not be able to be played.  
• The more folders there are, the longer the reading time.  
• Depending on the folder tree, reading MP3 files can take  
time.  
*2 About the JPEG file format  
CDG, Video CD, Photo CD, CD-ROM, CD-TEXT,  
SVCD, SACD, PD, CDV, CVD, DVD-RAM, DVD-  
Audio, BD-RE with the cartridge, CD-WMA  
JPEG is a type of file format for storing still-image  
files (photos, illustrations, etc.). The Player lets you  
play JPEG format still-image files.  
File formats that are not compatible.  
• Still images in formats other than JPEG (such as TIFF)  
cannot be played.  
• There may be some files that cannot be played even if  
they are in JPEG format.  
• Progressive JPEG files cannot be played.  
• Moving image files as well as Motion JPEG format files  
cannot be played, even though they are JPEG files.  
Discs with unusual shapes cannot be played.  
• Discs with unusual shapes (heart-shaped or hexagonal  
discs, etc.) cannot be used. The use of such discs will  
cause malfunction.  
• The playing time may not be correctly displayed during  
MP3 file playback.  
The following files cannot be played on this  
player.  
• When both Audio CD [CD-DA] format and JPEG/  
MP3 file formats are recorded on a disc. (The disc is  
recognized to be an Audio CD [CD-DA] only tracks in  
Audio CD [CD-DA] format are played back.)  
• Multi-session discs cannot be played.  
The following BD video discs cannot be played.  
• Discs not displaying “A” or “ALL” for the region code  
(discs sold outside the authorized marketing area).*  
• Discs produced illegally.  
• Discs recorded for commercial use.  
The region code for this product is A.  
Other files that cannot be played back.  
You may not be able to play some still images which  
you have created, touched up, copied or otherwise  
edited on your computer.  
You may not be able to play some still images you have  
processed (rotated or saved by overwriting other images  
you have imported from the Internet or e-mail).  
*
The following DVD video discs cannot be played.  
• Discs not displaying “1” or “ALL” for the region code  
(discs sold outside the authorized marketing area).*  
• Discs produced illegally.  
• Discs recorded for commercial use.  
You may experience one or more of the following  
symptoms when playing files.  
The region code for this product is 1.  
*
The following BD-RE/R, DVD-RW/R and  
DVD+RW/R discs cannot be played.  
• Discs on which data has not been recorded cannot be  
played back.  
• It may take some time to play files depending on the  
number of folders, number of files and volume of data  
involved.  
• EXIF information will not be displayed. EXIF stands for  
Exchangeable Image File Format, and is a standard for  
storing interchange information in image files, especially  
for more information.)  
The following Audio CD*1 discs cannot be played.  
• Discs containing a signal for the purpose of protecting  
copyrights (copy control signal) may not be played back  
with this Player.  
• This Player has been designed on the premise of  
playing back Audio CDs that comply with CD (Compact  
Disc) standards.  
10  
About Media Types  
About files/folders for Still images (JPEG  
ABOUT DivX VIDEO  
Title, Chapter and Track  
• DivX® is a digital video format created by DivX, Inc. This  
is an official DivX Certified® device that plays DivX video.  
tools to convert your files into DivX video.  
files) and audio data (MP3 files)  
You can play still images (JPEG files) /audio data  
(MP3 files) with this unit by making folder(s) on discs  
or USB memory devices as shown below.  
• Blu-ray discs and DVDs are divided into “Titles”  
and “Chapters”. If the disc has more than one  
movie on it, each movie would be a separate  
“Title”. “Chapters”, on the other hand, are  
subdivisions of titles. (See Example 1.)  
• Audio CDs are divided into “Tracks”. You can think  
of a “Track” as one tune on an Audio CD. (See  
Example 2.)  
ABOUT DivX VIDEO-ON-DEMAND  
• This DivX Certified® device must be registered in order  
to play DivX Video-on-Demand (VOD) movies. To obtain  
the registration code, locate the DivX VOD section in  
your device setup menu. Go to vod.divx.com for more  
information on how to complete your registration.  
Example of a folder structure:  
Root  
L
001.jpg/001.mp3  
xxx.jpg/xxx.mp3  
L
Example 1: Blu-ray disc or DVD  
About Disc Contents  
BD Video  
001.jpg/001.mp3  
256.jpg/256.mp3  
01 Folder  
Folder  
Title 1  
Title 2  
001.jpg/001.mp3  
255.jpg/255.mp3  
L
L
Enjoy BD-specific functions including BONUSVIEW  
(BD-ROM Profile 1 Version 1.1), such as picture-in-  
picture, and BD-LIVE (page 28).  
Chapter 1  
Chapter 2  
Chapter 3  
Chapter 1  
Example 2: Audio CD  
xxx Folder  
001.jpg/001.mp3  
256.jpg/256.mp3  
For the BD video discs compatible with  
BONUSVIEW/BD-LIVE, you can enjoy additional  
contents by copying the data from the discs or  
downloading it via the Internet. For instance, this  
function is capable of playing the original movie as  
the primary video while playing video commentary  
from the film director on a small screen as a  
secondary video.  
Track 1  
Track 2  
Track 3  
Track 4  
L
Including the root directory, the maximum number of folders  
and files in each folder is limited to 256 in total.  
File and folder requirements  
• The discs or USB memory devices which this player  
can play back (recognize) are limited to the following  
properties:  
Contains EXIF format files (only JPEG files)  
Picture resolution: Between 32 x 32 and 7680 x 4320  
pixels (only JPEG files)  
NOTE  
• The available functions differ depending on the disc.  
Maximum number of folders and files in each folder:  
256  
Maximum hierarchy level of folders: 5  
File size: 20 MB or less (JPEG files)  
200 MB or less (MP3 files)  
NOTE  
• File and folder names displayed on this player may differ  
from those displayed on PCs.  
11  
About Media Types  
2
3
4
Subtitle languages  
Icons Used on BD/DVD Video Disc  
Cases  
This indicates the kind of subtitles.  
Screen aspect ratio  
Movies are shot in a variety of screen modes.  
The back of the case of a BD/DVD that is  
commercially available usually contains various  
information about the contents of the disc.  
Camera angle  
Recorded onto some BD/DVD discs are scenes  
which have been simultaneously shot from a number  
of different angles (the same scene is shot from the  
front, from the left side, from the right side, etc.).  
1
2
1. English  
2. Chinese  
1. English  
2. Chinese  
2
5
2
Region code  
This indicates the region code (playable region code).  
3
4
5
The Icons Used in This Operation  
Manual  
1 23  
4 56  
16:9 LB  
2
.............. Indicates the functions that can be  
performed for BD Video discs.  
.............. Indicates the functions that can be  
performed for BD-RE discs.  
.............. Indicates the functions that can be  
performed for BD-R discs.  
DVD Video BD Video  
BD VIDEO  
1
Audio tracks and audio formats  
BD-RE  
BD-R  
BD and DVD discs can contain up to 8 separate  
tracks with a different language on each. The first in  
the list is the original track.  
This section also details the audio format of each  
soundtrack — Dolby Digital, DTS, MPEG etc.  
...........Indicates the functions that can be  
DVD VIDEO  
performed for DVD Video discs.  
.............. Indicates the functions that can be  
performed for DVD-RW discs.  
.............. Indicates the functions that can be  
performed for DVD-R discs.  
.............. Indicates the functions that can be  
performed for Audio CDs.  
Dolby Digital  
A sound system developed by Dolby Laboratories Inc.  
that gives movie theater ambience to audio output  
when the Player is connected to a Dolby Digital  
processor or amplifier.  
DVD-RW  
DVD-R  
AUDIO CD  
CD-R  
DTS  
DTS is a digital sound system developed by DTS, Inc.  
for use in cinemas.  
.............. Indicates the functions that can be  
performed for CD-R discs.  
Linear PCM  
Linear PCM is a signal recording format used for  
Audio CDs and on some DVD and Blu-ray discs. The  
sound on Audio CDs is recorded at 44.1 kHz with  
16 bits. (Sound is recorded between 48 kHz with 16  
bits and 96 kHz with 24 bits on DVD video discs and  
between 48 kHz with 16 bits and 192 kHz with 24 bits  
on BD video discs.)  
.............. Indicates the functions that can be  
performed for CD-RW discs.  
.............. Indicates the functions that can be  
performed for USB memory devices.  
CD-RW  
USB  
12  
Important Information  
Cleaning the Pick Up Lens  
is a trademark.  
Disc Precautions  
• Never use commercially available cleaning discs. The  
use of these discs can damage the lens.  
• Request the nearest service center approved by SHARP  
to clean the lens.  
• “BD-LIVE” logo is a trademark of Blu-ray Disc  
Association.  
Be Careful of Scratches and Dust  
• BD, DVD and CD discs are sensitive to dust, fingerprints  
and especially scratches. A scratched disc may not  
be able to be played back. Handle discs with care and  
store them in a safe place.  
is a trademark of DVD Format/Logo Licensing  
Corporation.  
Warnings about dew formation  
• Condensation may form on pick up lens or disc in the  
following conditions:  
Immediately after a heater has been turned on.  
In a steamy or very humid room.  
When the Player is suddenly moved from a cold  
environment to a warm one.  
When condensation forms:  
• HDMI, the HDMI logo and High-Definition Multimedia  
Interface are trademarks or registered trademarks of  
HDMI Licensing LLC.  
• “x.v.Color” and “x.v.Color” logo are trademarks of Sony  
Corporation.  
• Java and all Java-based trademarks and logos  
are trademarks or registered trademarks of Sun  
Microsystems, Inc. in the United States and/or other  
countries.  
• “BONUSVIEW” logo is a trademark of Blu-ray Disc  
Association.  
• “AVCHD” and the “AVCHD” logo are trademarks of  
Panasonic Corporation and Sony Corporation.  
• “Blu-ray 3D” and “Blu-ray 3D” logo are trademarks of  
Blu-ray Disc Association.  
• Netflix and the Netflix logo are the registered trademarks  
of Netflix, Inc.  
Proper Disc Storage  
Place the disc in the center  
of the disc case and store the  
case and disc upright.  
• It becomes difficult for the Player to read the signals  
on the disc and prevents the Player from operating  
properly.  
Avoid storing discs in locations  
subject to direct sunlight,  
close to heating appliances or  
in locations of high humidity.  
To remove condensation:  
Take out the disc and leave the Player with the  
power off until the condensation disappears. Using  
the Player when there is condensation may cause  
malfunction.  
Do not drop discs or subject  
them to strong vibrations or  
impacts.  
YouTube is a trademark of Google Inc.  
• VUDU™ is a trademark of VUDU, Inc.  
• DivX®, DivX Certified®, DivX PlusTM HD and associated  
logos are trademarks of DivX, Inc. and are used under  
license.  
License and Copyright  
Avoid storing discs in locations  
where there are large amounts  
of dust or moisture.  
Audio-visual material may consist of copyrighted  
works which must not be recorded without the  
authority of the owner of the copyright. Refer to  
relevant laws in your country.  
• “This item incorporates copy protection technology  
that is protected by U.S. patents and other intellectual  
property rights of Rovi Corporation. Reverse engineering  
and disassembly are prohibited.”  
Handling Precautions  
• If the surface is soiled, wipe gently with a soft, damp  
(water only) cloth. When wiping discs, always move the  
cloth from the center hole toward the outer edge.  
• Manufactured under license from Dolby Laboratories.  
“Dolby” and the double-D symbol are trademarks of  
Dolby Laboratories.  
ENERGY STAR® Program Information  
• Manufactured under license under U.S. Patent #’s:  
5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,226,616;  
6,487,535; 7,392,195; 7,272,567; 7,333,929; 7,212,872  
& other U.S. and worldwide patents issued & pending.  
DTS and the Symbol are registered trademarks, &  
DTS-HD, DTS-HD Master Audio | Essential and the DTS  
logos are trademarks of DTS, Inc. Product includes  
software. ©DTS, Inc. All Rights Reserved.  
• Do not use record cleaning sprays, benzene, thinner,  
static electricity prevention liquids or any other solvent.  
• Do not touch the surface.  
• Do not stick paper or adhesive labels to the disc.  
• If the playing surface of a disc is soiled or scratched,  
the Player may decide that the disc is incompatible  
and eject the disc tray, or it may fail to play the disc  
correctly. Wipe any dirt off the playing surface with a  
soft cloth.  
Products that have earned  
the ENERGY STAR® are  
designed to protect the  
environment through  
superior energy efficiency.  
ENERGY STAR® is a U.S. registered mark.  
13  
Major Components  
Main Unit (Front)  
Main Unit (Rear)  
2
3
1
3
4
5
6
7
2
12  
4
5
1
8
9
10  
11  
1
POWER (p. 21)  
8 USB2 terminal (p. 32)  
1
AC IN terminal (p. 20)  
2
3
4
5
6
7
POWER (ON/STANDBY) indicator (p. 21) 9 Remote control sensor (p. 20)  
2 ETHERNET terminal (p. 18)  
3 W-LAN*/USB1 terminal (p. 19, 27)  
4 HDMI OUT terminal (p. 16)  
d PLAY (p. 25)  
0 BD/DVD/CD mode indicator (p. 21)  
Q Door flap  
H STOP (p. 25)  
G REV (p. 35)  
J FWD (p. 35)  
OPEN/CLOSE (p. 25)  
W Disc tray (p. 25)  
5 DIGITAL AUDIO OUT OPTICAL terminal (p. 17)  
The only wireless LAN adapter which can be connected to this player is the VR-WL25  
adapter (sold separately) (p. 5).  
*
NOTE  
• When you insert or remove a USB memory device, be sure to turn the main power off.  
Also, be sure to set “Quick Start” to “No” (See page 43) before inserting or removing  
the device. If you insert or remove the device with the player or Quick Start on, the data  
may become damaged.  
14  
Major Components  
1
POWER (p. 21)  
m OPEN/CLOSE (p. 25)  
Remote Control Unit  
2
3 AUDIO (p. 37), SUBTITLE (p. 37)  
4 Number buttons (p. 39)  
5 VUDU (p. 56)  
6
7
8
9
T SKIP/k (pp. 29, 35)  
U SKIP/l (pp. 29, 35)  
F PAUSE (pp. 32, 35)  
d PLAY (p. 25)  
1
2
3
16  
17  
0 TOP MENU/TITLE LIST (pp. 26, 29)  
Q Cursor buttons (a/b/c/d), ENTER (pp. 22, 40)  
W EXIT (p. 40)  
4
E A (Red), B (Green), C (Blue), D (Yellow)  
(pp. 29, 30, 32, 49)  
R
(Lock) (See below.)  
T3D (p. 23)  
5
6
Y DISPLAY (pp. 26, 36)  
UTV control buttons (p. 22)  
I FUNCTION (pp. 36, 38)  
O V FWD (p. 35)  
PS REV (p. 35)  
A H STOP (p. 25)  
SPOP-UP MENU (p. 27)  
Dn RETURN (pp. 31, 36)  
FPinP (p. 28)  
18  
19  
20  
21  
7
8
9
10  
22  
GHOME (pp. 22, 40)  
11  
Keylock function  
You can set the keylock to prevent accidental operations.  
This function allows TVs compatible with AQUOS LINK to also perform a Key Lock on the player.  
12  
13  
23  
Press and hold  
(Lock) for more than 2 seconds.  
• Each time you perform this operation, the function is activated or deactivated.  
• If you try to operate the Player while the keylock function is set, “Hold” blinks on the front display panel  
to indicate that the keylock function is set.  
14  
15  
24  
25  
15  
Connection  
Connecting to a TV/projector  
You can enjoy high quality digital picture and sound using an HDMI cable. (Only  
TVs/projectors with an HDMI terminal can be connected to this player.)  
When you use AQUOS LINK, make sure to use a certified HDMI cable.  
NOTE  
• In this player, HDMI Video Out” is set to “Auto” as a default (See page 42). (Normally  
set to “Auto”.) If you don’t get a stable image with “HDMI Video Out” set to “Auto”,  
select the output resolution which corresponds to the connected equipment.  
To enjoy 3D images, connection to a 3D compatible TV is needed.  
1 Be sure to turn off this Player and the TV/projector before making any  
connections.  
• For connection to a TV/projector, refer to the TV/projector’s operation manual.  
2 Firmly connect an HDMI cable (commercially available) to the HDMI OUT  
terminal on the player (1) and the HDMI IN terminal of the TV/projector (2).  
E
After connecting  
• If desired, connect audio equipment. (Page 17)  
• If necessary, perform the Audio Video Settings. (Pages 42–43)  
• Refer to AQUOS LINK function. (Pages 23 and 43)  
• Prepare the desired disc or content and start playback. (Pages 25–34)  
HDMI cable  
(commercially available)  
Projector  
TV  
16  
Connecting to an amplifier/AV receiver  
You can connect this player to an amplifier/AV receiver to enjoy digital surround  
sound. With this player, the audio connection can be made using either one of  
the following methods depending on the capabilities of the amplifier/AV receiver  
you connect.  
Digital audio connection  
You can connect an amplifier/AV receiver using an optical digital audio cable  
(commercially available).  
• HDMI connection  
• Digital audio connection  
NOTE  
• Be sure to turn off this Player and the equipment before making any connections.  
• For details on output of next generation audio formats, see page 54.  
HDMI connection  
Optical digital cable  
*
Amplifier/AV receiver  
Commercially available  
HDMI cable  
*
*
NOTE  
• When using OPTICAL DIGITAL AUDIO OUT, 5.1ch Digital Output is available. (7.1ch  
Digital Output is not available.)  
E
After connecting  
• If necessary, perform the Audio Video Settings. (Pages 42–43)  
• Prepare the desired disc or content and start playback. (Pages 25–34)  
TV  
Amplifier/  
AV receiver  
HDMI cable  
*
Commercially available  
*
NOTE  
• When using an HDMI output, 7.1 ch Digital Output is available.  
• Audio transmitted in DTS-HD High Resolution Audio and DTS-HD Master Audio  
formats is output from the HDMI terminal as Bitstream. Connect an amplifier with a  
built-in decoder to enjoy the fine sound quality.  
17  
Broadband Internet Connection  
By connecting this player to the Internet, you can enjoy a variety of content  
on your TV using BD-LIVE functions, video on-demand services (e-Contents),  
home networks and also perform software updates. In this player, the Internet  
connection can be made using either one of the following methods.  
• Wired connection (LAN cable)  
Wired connection (LAN cable)  
Connect a LAN cable (commercially available) to the ETHERNET terminal of this  
player (1) and the LAN port of the broadband router (2).  
• Wireless connection (wireless LAN) (See page 19.)  
NOTE  
• Be sure to turn off this Player and the equipment before making any connections.  
• When an Internet connection is made, wired and wireless connections cannot be used  
at the same time. Use only one of the connection types (See page 46).  
CAUTION  
• When using a broadband Internet connection, a contract with an Internet service  
provider is required. For more details, contact your nearest Internet service provider.  
• Refer to the operation manual of the equipment you have as the connected equipment  
and connection method may differ depending on your Internet environment.  
LAN cable  
*
PC  
LAN  
Internet  
Modem  
Broadband  
router  
Commercially available  
*
NOTE  
• Use a LAN cable/router supporting 10BASE-T/100BASE-TX.  
• SHARP cannot guarantee that all brands’ hubs will operate with this player.  
E
After connecting  
• Perform the communication settings. (Pages 46–49)  
• When enjoying BD-LIVE functions, see pages 28 and 44.  
• When enjoying video on-demand services (e-Contents), see pages 55–56.  
To play back files via the Home Network, see page 34.  
To update the software via the Internet, perform Software Update Settings.  
(Pages 51–52)  
18  
Broadband Internet Connection  
NOTE  
Wireless connection (wireless LAN)  
• When you insert or remove a wireless LAN adapter, be sure to turn the main power off  
and make sure that “Quick Start” is set to “No” (See page 43).  
You must use a wireless router/access point that supports IEEE802.11 b/g/n. (n is  
recommended for stable operation of the wireless network.)  
• Wireless LAN, in its nature, may cause interference, depending on the usage conditions  
(access point performance, distance, obstacles, interference by other radio devices,  
etc.).  
Insert a wireless LAN adapter (sold separately, Model number VR-WL25) into the  
W-LAN/USB1 terminal on the rear of the player.  
• Set the wireless router/access point to Infrastructure mode. Ad-hoc mode is not  
supported.  
• SHARP cannot guarantee that wireless LAN adapters other than the VR-WL25 adapter  
will operate with this player.  
• SHARP cannot guarantee that all brands’ wireless routers will operate with this player.  
E
After connecting  
• Perform the communication settings. (Pages 46–49)  
• When enjoying BD-LIVE functions, see pages 28 and 44.  
• When enjoying video on-demand services (e-Contents), see pages 55–56.  
To play back files via the Home Network, see page 34.  
To update the software via the Internet, perform Software Update Settings.  
(Pages 51–52)  
Wireless LAN  
adapter*  
PC  
Wireless  
router  
Modem  
Internet  
When a wireless connection is made, it is necessary to enter the MAC address  
shown on the wireless LAN adapter for the wireless router. We recommend writing  
down the MAC address in this operation manual. (See page 48.)  
Optional accessories*  
Wireless LAN adapter  
VR-WL25  
19  
Playback  
Before Starting Playback  
NOTE  
Loading the Batteries in the Remote  
Control  
Connecting the Power Cord  
• Do not subject the remote control unit to shock, water  
or excessive humidity.  
• The remote control unit may not function if the Player’s  
remote sensor is in direct sunlight or any other strong  
light.  
Plug the supplied AC cord into the AC IN terminal on  
the rear of the Player (1). Then plug into AC outlet  
(2).  
1 Hold in the tab on the battery cover and pull the  
cover towards the direction of the arrow.  
• Incorrect use of batteries may cause them to leak or  
burst. Read the battery warnings and use the batteries  
properly.  
• Do not mix old and new batteries, or mix different  
brands.  
• Remove the batteries if you will not use the remote  
control unit for an extended period of time.  
2 Load the two “AA” size batteries (R-06 size,  
UM/SUM-3). Place batteries with their terminals  
corresponding to the m and n indications in  
battery compartment.  
Approximate operating range of  
remote control  
Remote control sensor  
NOTE  
• Place the Player close to the AC outlet, and keep the  
power plug within reach.  
• TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT  
TOUCH THE UN-INSULATED PARTS OF ANY CABLES  
WHILE THE AC CORD IS CONNECTED.  
• The POWER (ON/STANDBY) indicator blinks while the  
Player is preparing for starting up. You cannot turn the  
Player on until the POWER (ON/STANDBY) indicator  
stops blinking.  
• If you are not going to use this Player for a long period  
of time, be sure to remove the AC cord from the AC  
outlet.  
3 Insert the smaller tab of the battery cover into  
the opening 1, and press down on the cover  
until it clicks in place 2.  
15º  
*Approx. 22 feet (7m)  
30º  
30º  
15º  
WARNING  
Remote control unit  
• Do not use or store batteries in direct sunlight or other  
excessively hot place, such as inside a car or near a  
heater.  
This can cause batteries to leak, overheat, explode or  
catch fire.  
It can also reduce the life or performance of batteries.  
20  
Before Starting Playback  
Turning the Power On  
Turning the power on  
Indicators on the Player  
Press POWER on the remote control or on the  
Player to turn on the power of the Player.  
POWER (ON/STANDBY) indicator  
Green on  
Red blinks  
Red on  
Power on  
Preparing for standby  
Standby  
NOTE  
BD/DVD/CD mode indicator  
• When you turn on this player for the first time after  
purchase or when you turn on this player after you  
perform “System Reset” (see page 45), the language  
setting screen will be displayed, so please perform the  
language setting (see step 4 of page 22).  
Blue on  
Playing back  
Loading a disc  
1
Blue blinks  
2
3
Entering standby  
Press POWER on the remote control or on the  
Player to enter standby.  
1 POWER button  
2 POWER (ON/STANDBY) indicator  
3 BD/DVD/CD mode indicator  
• If you press POWER again immediately after entering  
standby, the Player may not turn on. If this happens,  
wait for 10 seconds or more and then turn on the power  
again.  
NOTE  
• When the POWER (ON/STANDBY) indicator is blinking  
(may take some time), the Player cannot be turned on.  
21  
Before Starting Playback  
Language Setting  
Operating a SHARP TV Using the  
Remote Control  
Turning Off the LCD Backlight and  
Indications  
The Universal Remote Control may operate the  
basic functions of the SHARP TV.  
If you feel that the indicators on the player’s front  
display are too bright when watching movies, you  
can turn them off except for the POWER (ON/  
STANDBY) indicator.  
TV function control  
• TV Power: POWER  
• TV-AV Selector: INPUT  
• TV Volume up/down: VOL e/f  
• TV Channel up/down: CH r/s  
Changing the on-screen display  
language  
1 Press a/b to select “Settings”, then press d or  
ENTER.  
2 Press a/b to select “On Screen Language”,  
1 Press a/b to select “Settings”, then press d or  
then press d or ENTER.  
ENTER.  
2 Press a/b to select “Smart Settings”, then  
Audio Video Settings  
Smart Settings  
AQUOS LINK  
Playback Setting  
On Screen Language  
Communication Setup  
Version  
USB Memory Management  
Video  
press d or ENTER.  
Music  
3 Press a/b to select “Front Display/LED”, then  
press d or ENTER.  
Picture  
4 Press a/b to select “On” or “Off”, then press  
e-Contents  
ENTER.  
Software Update Settings  
Settings  
System  
5 Press HOME or EXIT to exit.  
3 Press a/b to select the language you want to  
display on the screen, then press ENTER.  
NOTE  
To select the DVD disc language, such as subtitle  
language, etc., see page 26.  
22  
Before Starting Playback  
Using AQUOS LINK  
E
AQUOS PURE MODE  
NOTE  
When you connect this player to an AQUOS LCD  
TV compatible with AQUOS LINK and set “AQUOS  
LINK” to “Yes” (page 43), images automatically  
adjusted to the most suitable image quality for the  
AQUOS TV are output from the HDMI OUT terminal  
of this player.  
• The 3D mode can be switched only when playback is  
stopped.  
• Depending on the connected TV, the images during  
playback may switch to 2D images due to changes in  
the resolution, etc. Make sure the 3D image setting is  
performed on the TV.  
• The 3D images may not be output as set in “HDMI  
Video Out”.  
• When performing Fast Forward/Reverse, images are  
shown in 2D.  
Controlling the Blu-ray disc player  
using AQUOS LINK  
What is AQUOS LINK?  
NOTE  
Using the HDMI CEC (Consumer Electronics  
Control), with AQUOS LINK you can interactively  
operate this player with your SHARP AQUOS TV.  
• In order to make AQUOS LINK available, connect an  
LCD TV to this player using an HDMI terminal. Set  
“AQUOS LINK” to “Yes” (See page 43).  
Refer to the Operation Manual of the TV for details  
regarding setup.  
What you can do with AQUOS LINK  
CAUTION  
When you connect this player to the LCD TV  
compatible with AQUOS LINK using an HDMI cable,  
you can perform the functions listed below. (See  
page 16 for connecting to the HDMI terminal).  
• When viewing 3D images, viewing for a long period  
of time or lying on your back may cause eye strain  
and discomfort. In addition, 3D images may affect the  
eyesight of young children/infants, so keep them from  
viewing the images.  
Using 3D  
E
Automatic input select function  
This sets output of 3D images.  
To view 3D images, playback of 3D content (3D BD  
video) is necessary with a 3D compatible TV and 3D  
glasses in addition to this player.  
When you start playback of this player, the input  
selector of the LCD TV will automatically switch to  
the LCD TV input terminal connected to the player  
and the playback image will appear on the screen,  
even if you are watching a TV program.  
E
Automatic power off function  
Press 3D to change to the 3D mode.  
• Each time the button is pressed, the mode switches  
between “Auto(3D)” and “2D”.  
• The status of the selected mode will be displayed on the  
TV screen.  
If you turn off the LCD TV when this player is in stop  
mode, the power of this player will be turned off  
automatically. (However, when playing back a disc  
or other content using this player, the power does  
not turn off.)  
Auto: Video signals are output as 3D when 3D content (3D  
BD video) is played or as 2D when 2D content is played.  
2D: Even if 3D content (3D BD video) is played, video  
signals are output as 2D at all times.  
E
Automatic power on function  
When you switch to the LCD TV input terminal  
connected to this player, the power of this player will  
be turned on automatically.  
• This setting (Auto(3D)/2D) can also be performed using  
the menu screen (See page 44).  
23  
Before Starting Playback  
Control Panel  
Control Panel  
Major functions of each button icon  
This function allows you to operate this player using  
the TV remote control by displaying the control  
panel on the TV screen.  
• Display the pop-up menu screen for BD  
video and the menu screen for DVD video.  
POP-UP  
MENU  
POP-UP  
MENU  
TOP MENU  
TITLE LIST  
FUNC.  
To operate this function, connect this player to a TV  
compatible with HDMI CEC (Consumer Electronics  
Control) using an HDMI cable (See page 16). Make  
sure that “Control Panel” is set to “Yes” (See page 43).  
When the settings are completed, perform the following  
operations.  
• Display the top menu screen for BD video  
and DVD video.  
TOP MENU  
TITLE LIST  
• Display the Function Control screen for BD  
video, DVD video, etc.  
FUNC.  
NOTE  
• The control panel may not be displayed depending on  
the TV. Also, it may not be available depending on the  
content.  
• When operating using the remote control of the player,  
the control panel does not appear.  
• Fast reverse (search).  
• Play.  
INSTANT  
REPLAY  
SKIP  
SEARCH  
• When playing video on demand streaming content  
available with this player, the control panel cannot be  
displayed.  
PANEL  
OFF  
Select  
Enter  
• Fast forward (search).  
• Skip to the beginning of a chapter.  
• Pause.  
1 Switch the TV input to the input source to which  
• When there is no operation for approximately  
10 seconds, the control panel disappears  
automatically.  
To display the control panel, press the PLAY button  
on the TV remote control.  
this player is connected (HDMI input).  
2 Press the PLAY button on the TV remote control.  
• The control panel appears on the TV screen.  
3 Press a/b/c/d on the TV remote control  
to select the desired button icon, then press  
ENTER.  
• The function of the selected button icon is available.  
• Skip to the next chapter.  
• Jump backward (approx. 10 seconds).  
(This function is used when you want to re-  
watch a scene that has just been shown.)  
INSTANT  
REPLAY  
• Stop.  
SKIP  
• Jump ahead (approx. 30 seconds).  
Turn off the control panel.  
SEARCH  
PANEL  
OFF  
24  
Video/Picture/Music Playback  
NOTE  
Loading a Disc  
BD/DVD Video Playback  
• The disc load time may vary depending on the disc.  
BD VIDEO  
BD-RE  
BD-R  
Regarding playback of BD video discs  
• Some of the newly released BD video discs cannot be  
played back unless you update the player software  
to the latest version. Therefore, it may be required to  
update the software of the player.  
• Refer to pages 51–54 for more information regarding  
software updates for the player.  
DVD VIDEO  
DVD-R DVD-RW  
This section explains playback of commercially  
available BD Video and DVD Video discs (like  
movies) and recorded DVD-RW/R discs.  
• This player supports DVD upscaling during DVD  
playback.  
POWER  
OPEN/CLOSE  
• For a description of other playback functions, refer to  
“Playback Functions” on pages 35–37.  
To stop playback  
Press c.  
Resume playback function  
• If you press a next, playback will resume from  
the point where the Player was previously stopped. To  
playback from the beginning, cancel resume mode by  
pressing c, then press a. (This may not  
work depending on the type of disc. In this case, open  
the disc tray or enter standby.)  
1 Press POWER to turn on the power.  
2 Press OPEN/CLOSE to open the disc tray.  
3 Load a disc on the disc tray.  
• Insert the disc with the label face up.  
• In case of disc recorded on both sides, face down  
the side to play back.  
NOTE  
• Resume playback may not function depending on the  
disc.  
• The resume playback function for discs will be cancelled  
if video on demand streaming content is viewed  
after disc playback. Disc playback will start from the  
beginning after viewing streaming content.  
1 Load a disc.  
• Playback may begin automatically, depending on  
the disc.  
• Playback begins from the first title.  
• The menu may be displayed first, depending on the  
disc. Perform playback operation by following the  
directions on the screen.  
4 Press OPEN/CLOSE to close the disc tray.  
• When loading a disc containing 3D content (3D BD  
video) with “Yes” selected in the “3D Notice” setting  
(page 45), playback will be stopped and the 3D  
notice will be displayed on the TV screen. In such  
cases, press ENTER for confirmation, and then  
playback will start.  
2 Press a if playback does not begin  
automatically or playback is stopped.  
25  
Video/Picture/Music Playback  
NOTE  
Displaying the disc information  
BD/DVD Menus  
• The procedure explained on this page is the basic  
operation procedure. Procedures vary depending on  
the BD/DVD video disc, so you may need to follow the  
instructions in the BD/DVD video disc manual or the  
instructions displayed on the screen.  
• This section explains how to play back a BD/DVD  
video disc with a top menu, disc menu or pop-up  
menu.  
• The titles listed in the top menu and a disc guide  
(for options like subtitles and audio languages) are  
given in the disc menu.  
Top menu  
• With some BD/DVD discs, the top menu may be  
referred to as the “Title Menu”. Use TOP MENU/TITLE  
LIST on the remote control when the instructions refer  
to “Title Menu”.  
Press DISPLAY during playback.  
• Each time you press DISPLAY, the display switches  
as follows.  
• If no top menu is available, the TOP MENU/TITLE LIST  
button will have no effect.  
1
BD-VIDEO  
Disc Information  
screen A  
Using the disc menu  
2
3
4
1/1  
1/101  
00:00:12  
/03:12:28  
DVD VIDEO  
Example: Select “SUBTITLE LANGUAGE”.  
Start playback by selecting a title  
from the top menu  
1 Press TOP MENU/TITLE LIST.  
• The disc menu screen is displayed if present on the  
DVD video disc.  
00:00:12  
/03:12:28  
4
Disc Information  
screen B  
BD VIDEO DVD VIDEO  
2 Press a/b to select “SUBTITLE LANGUAGE”,  
then press ENTER.  
1 Press TOP MENU/TITLE LIST.  
• The top menu screen is displayed if present on the  
BD/DVD video disc.  
No Display  
• The screen for selecting the subtitle language is  
displayed.  
1 Type of disc  
Example  
2 Title number being played / Total number of  
Example  
Titles  
MENU  
3 Chapter number being played / Total number  
of Chapters  
4 Elapsed playback time / Total playback time  
for the Title  
T O P M E N U  
1
2
3
AUDIO LANGUAGE  
SUBTITLE LANGUAGE  
AUDIO  
1
3
2
Jazz  
Latin  
4
Classic  
Rock  
NOTE  
• Disc Information Screen A disappears after about 1  
minute elapses without performing any operations.  
• For some commercially-released BD VIDEO discs, the  
total playback time display for the Chapter/Title may not  
appear.  
2 Press a/b/c/d to select the title, then press  
ENTER.  
3 Press a/b to select the subtitle language, then  
press ENTER.  
• The selected title is played back.  
4 Press TOP MENU/TITLE LIST to exit.  
26  
Video/Picture/Music Playback  
Rear  
Using the pop-up menu  
Enjoying BONUSVIEW or BD-LIVE  
BD VIDEO  
BD VIDEO  
This Player is compatible with additional functions of  
BD-Video, BONUSVIEW (BD-ROM Profile 1 Version  
1.1) and BD-LIVE.  
For BD-Video discs compatible with BONUSVIEW,  
the functions of Picture in Picture and Virtual  
Package are available. For BD-LIVE compatible  
discs, you can enjoy a variety of functions via the  
Internet in addition to the BONUSVIEW functions.  
1 Press POP-UP MENU during playback.  
• The pop up menu screen is displayed.  
• The menu contents displayed vary depending on  
the disc. For details on how to see and operate the  
pop-up menu, refer to the manual for the disc.  
USB memory device  
• If there is insufficient storage space, the data will not  
be copied/downloaded. Delete unneeded data or use a  
new USB memory device.  
• If a USB memory device containing other data  
(previously recorded) is used, the video and audio may  
not play back properly.  
• If the USB memory device is disconnected from this  
player during playback of Virtual Package/BD-LIVE data,  
playback of the disc will stop.  
• Some time may be required for the data to load (read/  
write).  
Example  
Pop-up menu  
Previous page  
Next page  
Virtual Package/BD-LIVE data is saved in Local  
Storage (USB memory device connected to this  
Player). To enjoy these functions, connect a USB  
memory device (2GB or greater) supporting USB  
2.0 High Speed (480Mbit/s) to the USB1 or USB2  
terminal on this player.  
2 Press a/b/c/d to select the desired item,  
then press ENTER.  
• Refer to “USB Memory Management” on page 50 for  
erasing the Virtual Package data and the BD-LIVE data  
in the USB memory device.  
3 Press POP-UP MENU to exit.  
• The pop-up menu will automatically disappear for  
some discs.  
When the wireless LAN adapter is not inserted into the  
USB1 terminal on the rear of the player, it is recommended  
that the USB memory device be connected to the USB1  
terminal. (When you insert or remove a USB memory  
device, be sure to turn the main power off and make sure  
that “Quick Start” is set to “No” (See page 43).)  
NOTE  
• SHARP cannot guarantee that all brands’ USB memory  
devices will operate with this player.  
• Only USB memory devices formatted with FAT 32/16 are  
compatible.  
When formatting a USB memory device using a PC,  
perform the following settings.  
Format File System: FAT32  
Allocation Unit Size: Default Allocation Size  
• Do not use a USB extension cable when connecting a  
USB memory device to the USB terminal of the player.  
Using a USB extension cable may prevent the player  
from performing correctly.  
NOTE  
• A USB memory device can be used with either the  
USB1 or USB2 terminal. When two USB memory  
devices are connected to both terminals at the same  
time, in certain situations the USB1 terminal may give  
priority to Local Storage and the USB2 terminal cannot  
be used for Local Storage.  
27  
Video/Picture/Music Playback  
NOTE  
Use of Picture in Picture function  
(secondary audio/video playback)  
Virtual Package  
• Regarding playback method of BD-LIVE contents,  
etc., perform the operations in accordance with the  
instructions in the BD disc manual.  
To enjoy BD-LIVE functions, perform the broadband  
Internet connection (pages 18–19) and communication  
settings (pages 46–49).  
• Before using this function, please read “Network Service  
Disclaimer” (page 69).  
• Refer to page 44 regarding the setup to restrict access  
to BD-LIVE contents.  
For BD-Video discs compatible with Virtual  
Package, data is copied from the discs or Internet to  
local storage. It is automatically copied to the local  
storage prior to playback. You can enjoy a variety  
of additional functions including secondary video,  
secondary audio, subtitles, movie trailers, etc.  
• The playback methods vary depending on the disc. For  
details, refer to the disc manual.  
BD-Video that includes secondary audio and  
video compatible with Picture in Picture can be  
played back with secondary audio and video  
simultaneously as a small video in the corner.  
• If the BD-LIVE screen does not appear for a while after  
you select the BD-LIVE function in the BD disc menu,  
the USB memory device may not have enough free  
space. In such cases, eject the disc from the player, and  
then erase the data in the USB memory device in the  
“USB Memory Management” menu on page 50.  
BD-LIVE  
In this Player, a variety of contents with interactive  
functions are available through BD-LIVE compatible  
Blu-ray discs by connecting to the Internet. You  
can enjoy the download of bonus features such as  
latest movie trailers to the USB memory device,  
communication compatible BD-J interactive games,  
etc.  
1 Press PinP during playback to show the  
2-picture screen.  
• The available functions differ depending on the disc.  
Primary audio/  
video  
Secondary audio/  
video  
2 To remove the secondary video, press PinP  
again.  
NOTE  
To listen to secondary audio, make sure that “Secondary  
Audio” is set to “On”. (See page 42.)  
• The secondary audio and video for Picture In Picture  
may automatically play back and be removed  
depending on the content. Also, playable areas may be  
restricted.  
28  
Video/Picture/Music Playback  
About Title List  
DVD-R/-RW (VR format) / BD-RE/-R  
(BDAV format) Playback  
Playback by selecting a title  
• The Title List can be displayed in two types,  
Thumbnail and Title Name.  
1 Load a recorded disc.  
• Each time you press A (Red), the screen changes  
between Thumbnail and Title Name.  
DVD-R DVD-RW  
BD-RE  
BD-R  
• The Title List screen is displayed.  
Example: Thumbnail screen  
You can play back a recorded disc (DVD: VR format  
finalized disc only / BD: BDAV format disc only).  
• For a description of other playback functions, refer to  
”Playback Functions” on pages 35–36.  
Thumbnail  
Program 1  
Program 1  
1
5/21 Fri 9:30 AM 110 Min.  
5/21 Fri 9:30 AM 110 Min.  
Program  
1
Program  
2
Program  
3
Program  
1
Program  
2
Program  
3
Program  
4
Program  
5
Program  
6
Program  
4
Program  
5
Program  
6
㪜㪯㪠㪫  
Select  
Title Name  
Enter  
By Chapter  
Return  
Playlist  
Exit  
Functions  
㪜㪯㪠㪫  
Select  
Title Name  
Enter  
By Chapter  
Return  
Playlist  
Exit  
Functions  
3
1
A
B
C
D
A
B
C
D
• If the Title List screen is not displayed, press TOP  
MENU/TITLE LIST.  
• When loading a BD disc with usage restrictions  
placed by a BD recorder, the password input screen  
appears. Then, input your password.  
If you input a wrong password three times, the disc  
tray will open. Close the disc tray, and then input a  
correct password.  
Title Name  
Program 1  
5/21 Fri 9:30 AM 110 Min.  
1 Program 1  
Program  
1
5/21 Fri 110 Min.  
6/15 Fri 110 Min.  
7/3 Mon 56 Min.  
9/18 Thu 40 Min.  
9/20 Sat 20 Min.  
9/25 Thu 60 Min.  
2 Program 2  
3 Program 3  
4 Program 4  
5 Program 5  
6 Program 6  
[From Old]  
2 Press a/b/c/d to select the desired title, then  
NOTE  
press ENTER to start playback.  
• “Finalize” refers to a recorder processing a recorded  
disc so that it will play in other DVD players/recorders  
as well as this player. Only finalized DVD discs will play  
back in this player. (This player does not have a function  
to finalize discs.)  
• Some discs cannot be played back depending on the  
audio format.  
• BD-RE/-R discs recorded from a BD recorder comply  
with AACS copyright protection technology. As this  
player is not intended to be compliant with AACS, such  
discs cannot be played back.  
2
3
• If you want to select additional titles, switch pages  
by pressing f or g.  
You can playback by pressing a instead of  
pressing ENTER.  
1/All 8 Titles  
㪜㪯㪠㪫  
Select  
Thumbnail  
Enter  
Return  
Playlist  
Exit  
Functions  
A
B
C
D
Sorting  
3 Press c to stop playback.  
1 Information of selected title  
2 Title Name  
Recording Date  
Recording Duration  
3 Button Guide  
NOTE  
• The Title List screen also can be displayed by pressing  
TOP MENU/TITLE LIST when playback is stopped.  
(AACS: Advanced Access Content System)  
29  
Video/Picture/Music Playback  
Playback by selecting a chapter  
Playback by selecting a Playlist  
Playback from the beginning or  
resume playback  
1 Press B (Green) while the Thumbnail screen is  
displayed.  
1 Press C (Blue) while the Title List screen is  
displayed.  
When you play back the title from the Title List after  
you stopped playback, you can select playback  
from the beginning or from the point where it was  
last stopped.  
• The chapter screen is displayed.  
• The Playlist screen is displayed.  
Example: Thumbnail screen  
Chapter  
1
Chapter  
2
Chapter  
3
Program 1  
1 Press D (Yellow) when the desired title is  
5/21 Fri 9:30 AM 110 Min.  
selected while the Title List screen is displayed.  
Chapter  
4
Chapter  
5
Chapter  
6
Program  
1
Program  
2
Program  
3
2 Press a/b to select the type of Playback, then  
press ENTER to start playback.  
• The type of Playback may be selected from “From  
Beginning” or “From Continued”.  
• If you want to select additional chapters,  
switch pages by pressing f or  
g.  
Program  
4
3 Press c to stop playback.  
㪜㪯㪠㪫  
Select  
Title Name  
To return to the Thumbnail screen, press B (Green).  
Enter  
By Chapter  
Return  
Original  
Exit  
Functions  
A
B
C
D
2 Press a/b/c/d to select the desired chapter,  
then press ENTER to start playback.  
You can playback by pressing a instead of  
pressing ENTER.  
2 Press a/b/c/d to select the desired title, then  
press ENTER to start playback.  
3 Press c to stop playback.  
3 Press c to stop playback.  
Sorting the titles  
Each time you press B (Green) while the Title Name  
screen is displayed, the Title Name display changes  
between displaying the newest title first and the  
oldest title first.  
30  
Video/Picture/Music Playback  
2 Press a if playback does not begin  
Audio CD Playback  
Operation procedure for the  
“Functions” menu  
automatically or playback is stopped.  
AUDIO CD  
3 To pause the playback at any time, press  
b.  
1 Press D (Yellow) (Functions) when the CD screen  
is displayed.  
• Press b or a to return to playback.  
This Player can play back audio CDs.  
• For a description of other playback functions, refer to  
“Playback Functions” on pages 35–36.  
4 Press c to stop playback.  
• The “Functions” menu is activated.  
Playback by selecting a track  
1 Press a/b to select the track, then press  
ENTER during playback or when playback is  
stopped.  
• Playback of the selected track will begin.  
2 Press a/b to select the desired setting, then  
press ENTER.  
• When playback is stopped, only “Track” can be  
selected.  
• For a description of each setting, see “Functions  
which can be set” (Page 39).  
3 Press a/b/c/d to set, then press ENTER.  
• Operations vary depending on the setting. Follow  
the operation instructions on the screen.  
2 Press c to stop playback.  
Playback from the beginning  
4 Press j or D (Yellow) to exit the  
1 Load an audio CD.  
• The CD screen is displayed.  
“Functions” menu.  
(The CD screen is displayed only when a compact  
disc recorded in the CD-DA format is inserted.)  
• Playback may begin automatically, depending on  
the disc.  
NOTE  
• The displayed items vary depending on the disc.  
31  
Video/Picture/Music Playback  
1 Load a disc or insert a USB memory device  
containing audio data (MP3 files).  
5 Press ENTER to play back the selected file.  
Audio Data (MP3 File) Playback  
• Playback of the selected file will begin.  
• When the wireless LAN adapter is not inserted  
into the USB1 terminal on the rear of the player, it  
is recommended that the USB memory device be  
connected to the USB2 terminal.  
CD-R  
CD-RW  
DVD-R DVD-RW  
USB  
This Player can play back audio data (MP3 files)  
recorded on CD-R/RW discs, DVD-R/RW discs and  
USB memory devices or via a home network.  
• For details on the audio data that you can play using  
this player, refer to page 11.  
NOTE  
• A USB memory device can be used with either the  
USB1 or USB2 terminal. When two USB memory  
devices are connected to both terminals at the same  
time, in certain situations the USB1 terminal may give  
priority to Local Storage and MP3 files cannot be played  
back using this terminal.  
• When MP3 files are played, the “Functions” menu is  
not available.  
2 Press a/b to select “Music”, then press d or  
List of available buttons during playback  
ENTER.  
3 Press a/b to select “DVD/CD ”, “USB Memory  
Buttons  
a/b  
Description  
Select a desired audio file.  
Play back audio file.  
*
Device” or “Home Network”, then press d or  
ENTER.  
Display name varies depending on the type of  
media inserted.  
ENTER  
*
Pause audio file playback.  
• Return to playback when  
paused.  
b
• If only a “DVD/CD” or a USB memory device is  
inserted, the “DVD/CD” or “USB Memory Device”  
selection screen does not appear. In such cases,  
after step 2, proceed to step 4.  
Skip backward.  
Skip forward.  
Stop playback.  
f
g
c
4 Press a/b to select a folder or file.  
• When you select a folder, press ENTER to open it,  
and then press a/b to select a file in the folder.  
NOTE  
• When you insert or remove a USB memory device, be  
sure to turn the main power off and make sure that  
“Quick Start” is set to “No” (See page 43).  
Folder 1  
NOTE  
• The Fast Forward/Reverse function does not work.  
• The Repeat function does not work.  
• When data in the USB memory device is played back,  
playback from the USB memory device will stop when  
OPEN/CLOSE on the remote control or the player is  
pressed or when a disc is inserted into the player.  
CD  
1 Folder 1  
2 Folder 2  
3 Folder 3  
4 Folder 4  
5 Track 01.mp3  
6 Track 02.mp3  
1/All 14 files and folders  
32  
Video/Picture/Music Playback  
1 Load a disc or insert a USB memory device  
containing Still Images (JPEG files).  
5 Press ENTER to display the selected file.  
Displaying Still Images (JPEG files)  
• The selected still image appears on the screen.  
• When the wireless LAN adapter is not inserted  
into the USB1 terminal on the rear of the player, it  
is recommended that the USB memory device be  
connected to the USB2 terminal.  
CD-R  
CD-RW  
DVD-R DVD-RW  
USB  
1/77  
This Player can display still images (JPEG files)  
recorded on CD-R/RW discs, DVD-R/RW discs and  
USB memory devices or via a home network.  
• For details on the still images that you can display using  
this player, refer to page 11.  
• Still images are played one by one while during “Slide  
show”, they are automatically replaced one after  
another.  
NOTE  
• A USB memory device can be used with either the  
USB1 or USB2 terminal. When two USB memory  
devices are connected to both terminals at the same  
time, in certain situations the USB1 terminal may give  
priority to Local Storage and JPEG files cannot be  
played back using this terminal.  
Operational buttons during still image  
display  
2 Press a/b to select “Picture”, then press d or  
ENTER.  
Buttons  
Description  
3 Press a/b to select “DVD/CD ”, “USB Memory  
*
Go to the previous/next picture in  
the same directory.  
f/  
g
Device” or “Home Network”, then press d or  
ENTER.  
Display name varies depending on the type of  
media inserted.  
d/  
e
*
• If only a “DVD/CD” or a USB memory device is  
inserted, the “DVD/CD” or “USB Memory Device”  
selection screen does not appear. In such cases,  
after step 2, proceed to step 4.  
Return to the selection screen.  
j
A (red)  
Rotate the picture by 90 degrees  
to the left.  
4 Press a/b to select a folder or file.  
• When you select a folder, press ENTER to open it,  
and then press a/b to select a file in the folder.  
B (green)  
Rotate the picture by 90 degrees  
to the right.  
Play back Slide Show.  
• Return to slide show playback  
when paused.  
a
Folder 1  
NOTE  
• When you insert or remove a USB memory device, be  
sure to turn the main power off and make sure that  
“Quick Start” is set to “No” (See page 43).  
CD  
Pause slide show playback.  
b
c
1 Folder 1  
2 Folder 2  
3 Folder 3  
4 Folder 4  
5 Image 01.jpg  
6 Image 02.jpg  
Stop still image display/slide show  
playback.  
NOTE  
1/All 14 files and folders  
• Thumbnail data will be displayed when JPEG files from  
a digital camera contain thumbnail data.  
• An icon will be displayed for JPEG files which do not  
contain thumbnail data.  
To set slide show speed/repeat playback, press D  
(Yellow) (Slide Show Menu).  
• When data in the USB memory device is played back,  
playback from the USB memory device will stop when  
OPEN/CLOSE on the remote control or the player is  
pressed or when a disc is inserted into the player.  
33  
Video/Picture/Music Playback  
Accessing DLNA servers  
4 Press a/b to select a DLNA server which you  
want to access, then press ENTER or d.  
• The folder list or file list of the DLNA server which  
you accessed is displayed.  
NOTE  
• Some files may not be playable depending on the file.  
For details, refer to pages 10–11.  
The player can browse and play movies, music and  
photos stored on your DLNA Certified media servers  
connected within your home network.  
To enjoy this function, make a broadband Internet  
connection to both your PC and this player (See pages  
18–19), and then set communication settings (See  
pages 46–49), then perform the following operation.  
To use this function, we recommend setting “Auto  
Power Off” to “No”. (See page 43.)  
• The previous screen appears when j  
is pressed.  
5 Press a/b to select the folder or file which you  
want to access, then press ENTER.  
• When you select a folder, the file list of the folder is  
displayed. Press a/b to select the file which you  
want to play, then press ENTER.  
About a home network  
This Player can display and play movies, photos  
and music content from your DLNA-compatible  
digital media servers (such as a PC and consumer  
electronics).  
• Before using this function, please read “Network Service  
Disclaimer” (page 69).  
• Playback starts.  
Root  
Playback by selecting a file list  
Before accessing DLNA servers:  
• DLNA servers and this player must be connected to the  
same local area network. Specify the settings required  
for connecting this player to the local area network.  
• DLNA servers must be turned on.  
• When a PC running DLNA server software or other  
DLNA-compatible devices are connected to this player,  
some setting changes of software or other devices may  
be required.  
1 Press a/b to select Video/Music/Picture, then  
Folder1  
Folder2  
press d or ENTER.  
2 Press a/b to select “Home Network” in the sub  
Video01.divx  
Video02.divx  
Video03.divx  
Video04.divx  
1/ALL 40 files and folders  
window.  
Video  
BD-Video  
USB-1  
• Please refer to the operating instructions for the  
software or devices for more information.  
Music  
• For operation during playback, refer to pages  
35–36.  
Picture  
e-Contents  
Settings  
Home Network  
6 Press c to stop playback.  
• The file list reappears.  
• The previous screen appears when j  
is pressed.  
Sub Window  
7 Press EXIT or HOME to exit playback.  
• The HOME screen reappears.  
3 Press ENTER or d.  
• The player automatically scans and displays DLNA  
servers within your local network.  
Video  
BD-Video  
USB-1  
Music  
Picture  
e-Contents  
Settings  
Home Network  
Select server  
1. xxxxxxxxxxxxx  
2. yyyyyyyyyyyyy  
3. zzzzzzzzzzzzzz  
4. aaaaaaaaaaaa  
Types of playable files  
Video  
DivX Plus HD (avi/divx/mkv)  
Music  
Picture  
mp3  
jpg  
34  
Playback Functions  
Fast Forward/Reverse (Search)  
Pause/Frame Advance Playback  
BD VIDEO  
DVD VIDEO  
AUDIO CD  
BD-R  
BD-RE  
BD VIDEO  
BD-R  
BD-RE  
DVD-R DVD-RW  
DVD VIDEO  
DVD-R DVD-RW  
The Pause function is enabled when b is  
pressed during playback. (If you are playing back  
an audio CD, audio data [MP3 files] or still images  
[JPEG files], these will also pause.)  
The Fast Forward/Reverse function is enabled when  
d or e is pressed during playback.  
Example: When e is pressed  
• The search speed will change each time you press the  
button.  
The Frame Advance Playback function is enabled  
when g is pressed during pause.  
• Frame Advance Playback may not function properly  
with discs other than DVD-RW/R (VR format).  
When playing back a DVD  
You cannot perform Fast Forward/Fast Reverse from  
one title and continue to another title (except when  
playing audio CDs). At the end or beginning of the title,  
Fast Forward/Fast Reverse will be cancelled and normal  
playback will automatically resume.  
NOTE  
• Some BD/DVD Video discs are not compatible with  
Pause/Frame Advance Playback.  
• Frame Advance/Reverse Playback can be performed  
for DVD discs by pressing g or  
f during pause.  
NOTE  
• Subtitles are not played back with BD/DVD video discs  
during Fast Forward and Fast Reverse.  
Slow Playback (Forward/Reverse)  
Skipping to the Next or the Start of  
the Current Chapter (Track/Title)  
BD VIDEO  
BD-R  
BD-RE  
DVD VIDEO  
DVD-R DVD-RW  
BD VIDEO  
DVD VIDEO  
AUDIO CD  
BD-R  
DVD-R DVD-RW  
CD-R CD-RW  
BD-RE  
NOTE  
• Some operations in the following playback functions  
cannot be performed depending on the specifications of  
the disc.  
The Slow Playback (Forward/Reverse) function is  
enabled when g or f is  
pressed for more than 2 seconds during pause.  
Press a to return to normal playback.  
USB  
The Skipping (to the beginning of a chapter, track  
or title) function is enabled when f or  
g is pressed during playback.  
NOTE  
• This doesn’t work for audio CDs.  
You cannot perform Slow Playback between titles. At  
the end of the title, Slow Playback will be cancelled and  
normal playback will automatically resume.  
• Reverse Slow Playback cannot be performed for BD  
video and DVD discs in AVCHD format.  
35  
Playback Functions  
5 Press ENTER.  
4 Press ENTER at the scene where you want to  
set the start point.  
Repeat Playback of a Title or  
Chapter (Repeat Playback)  
Example: Repeat playback of a title (TITLE)  
• “Set End Point” displays.  
BD-VIDEO  
5 Press ENTER at the scene where you want to  
BD VIDEO  
DVD VIDEO  
AUDIO CD  
BD-R  
BD-RE  
set the end point.  
1/3  
5/25  
00:20:30  
2 English  
1
DVD-R DVD-RW  
You can press e to fast forward to the  
scene where you want to set the end point. When  
you reach the desired scene, simply press a  
and then ENTER to set the end point.  
1 DTS  
On Title Repeat  
1 Play back the title or chapter you want to repeat.  
NOTE  
2 Press FUNCTION.  
• Press g, the Repeat Playback is  
cancelled and the next chapter being play back.  
• Press f once, the Repeat Playback is  
cancelled and the player returns to the start of current  
chapter (track).  
• If you press f again (within about 5  
seconds) the player will skip to the beginning of the  
previous chapter (track).  
• For Partial Repeat Playback, set the start and end  
points within the same title.  
• Repeat Playback may be forbidden depending on the  
disc.  
• The Function Control screen is displayed on the TV.  
3 Press a/b to select the Repeat column, then  
press ENTER.  
On Title Repeat  
4 Press a/b to select the type of Repeat  
Playback.  
• Playback Title: Repeats the title currently being  
played back.  
6 Press j or FUNCTION to close the  
Function Control screen.  
• Playback Chapter: Repeats the chapter currently  
being played back.  
• Scene Selection: Repeats the specified scene of  
title or chapter.  
NOTE  
• “Scene Selection” operation is not available for BD  
video.  
• Partial Repeat Playback may not work in multi-angle  
scenes.  
• If you press DISPLAY, you can confirm the Repeat  
Playback status.  
NOTE  
• Press j to cancel without setting the type  
of Repeat Playback.  
• For Audio CD, you can select “Playing Disc”, “Playing  
Track” and “Specify The Part” as Repeat Playback  
options.  
Partial Repeat Playback (Repeat  
Playback of a Specified Part)  
DVD VIDEO  
DVD-R DVD-RW  
AUDIO CD  
1 Press FUNCTION during playback.  
• The Function Control screen is displayed on the TV.  
2 Press a/b to select the Repeat column, then  
press ENTER.  
3 Press a/b to select “Scene Selection”, then  
press ENTER.  
• “Set Start Point” displays.  
36  
Playback Functions  
2 Press a/b to select the Angle Number column,  
Displaying the Audio Information  
Switching Subtitles  
then press ENTER.  
BD VIDEO DVD VIDEO  
You can display the audio information on the disc  
currently being played back by pressing AUDIO.  
The displayed contents vary depending on the disc.  
BD-VIDEO  
If subtitles are provided in multiple languages, you  
can switch between them.  
1/3  
5/25  
00:20:30  
2 English  
1
1 DTS  
Off  
BD VIDEO DVD VIDEO  
Press SUBTITLE during playback.  
The audio channel currently being played back will  
be displayed.  
If multiple audio channels are recorded, you can  
switch the audio channel by pressing AUDIO.  
• The display indicates the subtitle number currently  
being played back, and the subtitles appear.  
Each time SUBTITLE is pressed, the subtitles change.  
• “–” is displayed if a disc has no subtitles.  
You can also select “Off”.  
3 Press a/b to select the desired Angle Number,  
then press ENTER.  
DVD-RW DVD-R  
4 Press j or FUNCTION to close the  
NOTE  
Function Control screen.  
When a recorded broadcast with stereo or  
monaural audio is played back:  
“Stereo” is displayed. (Audio cannot be switched.)  
• Settings for subtitles can also be changed in the  
Function Control screen (Page 38).  
• The operation of subtitles differs according to each disc.  
You may need to refer to the operation manual of the  
disc.  
• The display for subtitle information automatically  
disappears after 5 seconds.  
NOTE  
• The displayed items vary depending on the disc.  
• If you access the Function Control screen during  
playback of a BD/DVD video, it may be impossible to  
operate the BD/DVD video playback. In cases like this,  
close the Function Control screen.  
• The operation of angles differs according to each disc.  
You may need to refer to the operation manual of the  
disc.  
NOTE  
• When you play a program recorded in stereo or  
monaural, and if you are listening to the Bitstream  
sound via the digital output jack, you cannot select the  
audio channel. Set “Audio Out” to “PCM” (page 42).  
• Settings for audio can also be changed in the Function  
Control screen (Page 38).  
• The operation of audio differs according to each disc.  
You may need to refer to the operation manual of the  
disc.  
Switching the Angle  
• The display for angle information automatically  
disappears after 5 seconds.  
BD VIDEO DVD VIDEO  
If multiple angles are recorded, you can switch  
between them.  
• The display for audio information automatically  
disappears after 5 seconds.  
Displaying the Angle Mark  
1 Press FUNCTION during playback.  
BD VIDEO DVD VIDEO  
• The Function Control screen is displayed on the TV.  
You can change settings so that Angle Mark appears  
in the right bottom part of the screen when multiple  
angles are recorded. The settings can be changed  
in “Settings” – “Playback Setting” – “Angle Mark  
Display” (Page 44).  
37  
Settings During Playback  
3 Operation guide display  
Provides help on remote control button operations.  
3 Press a/b/c/d to set, then press ENTER.  
• Operations vary depending on the setting. Follow  
the operation instructions on the screen.  
Function Control  
BD VIDEO  
DVD VIDEO  
AUDIO CD  
BD-R  
BD-RE  
4 Press j or FUNCTION to close the  
Function control operation  
procedure  
DVD-R DVD-RW  
Function Control screen.  
NOTE  
• If “– –” is displayed for an option like title number or  
subtitles, the disc has no titles or subtitles which can be  
selected.  
• The displayed items vary depending on the disc.  
• If you access the Function Control screen during  
playback of a BD/DVD video, it may be impossible to  
operate the BD/DVD video playback. In cases like this,  
close the Function Control screen.  
This allows you to adjust various settings at once,  
like subtitles, angle settings and the title selection  
for Direct Playback. You can adjust the video and  
audio to suit your preferences. The operations are  
the same for BD and DVD.  
Function Control screen  
BD-VIDEO  
1
1/3  
5/25  
00:20:30  
2
2 English  
1
1 DTS  
Off  
1 Press FUNCTION during playback.  
• The Function Control screen is displayed on the TV.  
ENTER  
Select  
Exit  
Enter  
Return  
2 Press a/b to select the desired setting, then  
㪜㪯㪠㪫  
press ENTER.  
3
• For a description of each setting, see “Functions  
which can be set” (Page 39).  
1 Playback status display  
Shows the operation status and the disc type.  
BD-VIDEO  
1/3  
2 Setting items  
Selects a title (or track) or chapter for playback, or  
performs video/audio settings.  
5/25  
00:20:30  
2 English  
1
1 DTS  
Off  
• Title/Track Number (Direct Title/Track Skip)  
• Chapter Number (Direct Chapter Skip)  
• Playback Elapsed Time (Direct Time Skip)  
• Subtitle Language  
• Angle Number  
• Audio  
• Repeat  
38  
Settings During Playback  
Subtitle Language  
Functions which can be set  
• Shows the currently selected subtitle language. If  
subtitles are provided in other languages, you can  
switch to your preferred language.  
Title/Track Number (Direct Title/Track Skip)  
• Shows the title number being played back (or track  
number when playing back an audio CD). You can skip  
to the start of the title (or track).  
To skip to the start of a selected title (or track), press  
the Number buttons to enter the title (or track) number  
when this option is highlighted.  
Angle Number  
• Shows the currently selected angle number. If the video  
is recorded with multiple angles, you can switch the  
angle.  
Audio  
Chapter Number (Direct Chapter Skip)  
• Shows the currently selected type of audio. You can  
select the desired type of audio.  
• Shows the chapter number being played back. You can  
skip to the start of the chapter.  
To skip to the start of a selected chapter, press the  
Number buttons to enter the chapter number when this  
option is highlighted.  
Repeat  
• The current Title (or Chapter) or partial segments can be  
repeatedly played back.  
Playback Elapsed Time (Direct Time Skip)  
NOTE  
• Shows the time elapsed from the beginning of the  
current disc title (or track). This lets you skip to a  
specific time.  
• These functions may not work with all discs.  
• Press c/d to select the Hour, Minute or Second, then  
press a/b or the Number buttons to set the time.  
Press ENTER to start playback at the set time.  
39  
Settings  
SETTINGS  
Common operations  
The “menu” enables various audio/visual settings  
and adjustments on the functions using the remote  
control unit. You need to call up the On Screen  
Display to perform settings for this player. The  
following is the explanation for the basic operations  
of the “menu”.  
Home screen display  
Press a/b to select “Settings”, then press d or ENTER.  
HOME  
Audio Video Settings  
Smart Settings  
AQUOS LINK  
Playback Setting  
On Screen Language  
Communication Setup  
Version  
USB Memory Management  
Software Update Settings  
System  
Video  
Music  
Picture  
e-Contents  
Settings  
Example: Setting “AQUOS LINK”  
Select  
ENTER  
EXIT  
Enter  
Return  
Exit  
Select a menu item  
Press a/b to select “AQUOS LINK”, then press d or ENTER.  
HOME  
Audio Video Settings  
Smart Settings  
Video  
AQUOS LINK  
Music  
Playback Setting  
On Screen Language  
Communication Setup  
Version  
USB Memory Management  
Software Update Settings  
System  
Picture  
e-Contents  
Settings  
Select  
ENTER  
EXIT  
Enter  
Return  
Exit  
Select the next item  
Press a/b to select the desired item, then press ENTER.  
Press j to return to the previous “menu” page.  
Exit the menu screen  
Press HOME or EXIT to exit.  
40  
SETTINGS  
5 Press c/d to select the parental control level  
for DVD VIDEO, BD-ROM, and then select the  
country code. Press ENTER after making each  
selection.  
Basic Operation for Playback  
Setting  
Example: Setting “Parental Control” under “Playback  
Setting”  
Parental Control  
Disc Language  
Angle Mark Display  
Password Setting  
BD Internet Access  
3D Mode  
1 Press a/b to select “Settings”, then press d or  
ENTER.  
2 Press a/b to select “Playback Setting”, then  
press d or ENTER.  
Level 3  
0
3D Notice  
3 Press a/b to select “Parental Control”, then  
press d or ENTER.  
• When you operate this Player for the first time,  
the password setting screen will be displayed.  
See “When setting the password for the first time”  
below.  
USA  
6 Press HOME or EXIT to exit.  
4 Enter your 4-digit password.  
You cannot move to the next setting screen until  
you can input the correct password.  
When setting the password for the first time.  
1 To set the password for the first time, press  
a/b to select “Yes” to enter the password  
setting menu, then press d or ENTER.  
2 Enter a 4-digit number for the password, then  
the same 4-digit number for confirmation.  
3 Press ENTER to complete the password setting  
procedure and move to the next setting screen.  
41  
SETTINGS  
2 This sets the audio output mode for DIGITAL  
AUDIO OUT (OPTICAL terminal) when selecting  
“Digital Output”.  
Audio Out  
Audio Video Settings  
You can set the audio output when connecting to  
SURROUND equipment.  
HDMI Video Out  
Item  
1 This sets the audio output connected to  
Bitstream:  
This sets the resolution of the video output for the  
HDMI terminal of this player.  
SURROUND equipment.  
• Select this when connecting to SURROUND  
equipment with a built-in decoder for DOLBY  
DIGITAL, etc.  
• Setting to Bitstream will output each audio signal by  
Bitstream.  
Normally set to “Auto” (factory preset value).  
Item  
Item  
HDMI Output: Select this when you connect using  
HDMI OUT terminal.  
Digital Output: Select this when you connect using  
DIGITAL AUDIO OUT terminal (OPTICAL).  
Auto, 1080p, 1080i, 720p, 480p  
PCM:  
• Select this when connecting to 2 channel stereo audio  
equipment.  
• Setting to PCM will output by converting each audio  
signal into PCM 2 channel audio signal.  
NOTE  
• When the BD player is connected to a 1080p 24Hz  
compatible TV and the “HDMI Video Out” is set to  
“Auto”, 1080p 24Hz will automatically be displayed  
when compatible discs are played back.  
2 You can set the audio output mode for each  
output terminal.  
NOTE  
1 This sets the audio output mode for HDMI OUT  
• See page 54 for information on output of next  
generation audio formats.  
terminal when selecting “HDMI Output”.  
Secondary Audio  
NOTE  
This toggles the clicking sound on the menu and  
audio with secondary video in picture in picture  
mode for BD-Video.  
• Select “Off” when enjoying the high quality sounds of  
BD-Video.  
• When the secondary audio is set to “On”, PCM is  
automatically selected as the audio output mode.  
Item  
Bitstream:  
Item  
• Select this when connecting to HDMI equipment with  
a built-in decoder for DOLBY DIGITAL, etc.  
• Setting to Bitstream will output each audio signal by  
Bitstream.  
On, Off  
PCM (Surround):  
• Select this when connecting to multi-channel HDMI  
equipment.  
• Setting to PCM (Surround) will output by LINEAR  
PCM by decoding audio signals recorded in each  
audio output mode such as DOLBY DIGITAL, DTS.  
(Continued on the next page)  
42  
SETTINGS  
Dynamic Range Control  
Control Panel  
Smart Settings  
This lets you adjust the range between the loudest  
and softest sounds (dynamic range) for playback  
at average volume. Use this when it is hard to hear  
dialog.  
This lets you set display of the control panel on the  
TV screen to on or off.  
Quick Start  
This turns the Quick Start function on and off.  
When the Quick Start function is on:  
• The startup time of the Player is reduced.  
• However, power consumption will increase.  
When the Quick Start function is off:  
• The player will enter the low power consumption mode  
when in standby condition.  
Item  
Yes, No  
Item  
Normal: The same audio output range is played as the  
original recorded audio output range.  
Shift*: When Dolby Digital audio is played back, the  
dynamic range of the audio is adjusted so that the  
dialog portion can be heard easily. (If the audio  
sounds abnormal, set to “Normal”.)  
AQUOS LINK  
This lets you set the Player to receive the control  
signal from the AQUOS LINK remote control via the  
HDMI cable.  
Item  
Yes, No  
Auto: When you play back audio in the Dolby TrueHD  
format, the dynamic range is automatically adjusted.  
Item  
Yes, No  
NOTE  
Lower the audio volume before setting. If you do not do  
so, the speakers may emit a loud sound or excessive  
output may be applied to the speakers.  
*
• When “Quick Start” is set to “Yes”, the Player requires  
some time to turn off.  
NOTE  
• For details, refer to the operation manual of TV.  
Super Picture  
Auto Power Off  
This enhances the quality of video streaming images  
with pixel by pixel processing technology.  
This sets the Player so that power is automatically  
shut off if playback is stopped and you do not  
perform any operations for about 10 minutes.  
Item  
Item  
On, Off  
Yes, No  
Front Display/LED  
If you feel that the indicators on the player’s front  
display are too bright when watching movies, you  
can turn them off except for the POWER (ON/  
STANDBY) indicator.  
Item  
On, Off  
43  
SETTINGS  
Disc Language (Disc Priority Language)  
Password Setting  
Playback Setting  
This lets you select the language for subtitles, audio  
and menus displayed on the screen.  
This sets the password for setting or changing the  
Parental Control Level.  
Parental Control  
This lets you set the Parental Control depending  
on the disc content. The available Parental Control  
Levels are shown below.  
Item (Subtitle)  
Item  
Select the subtitle language you want to display.  
Yes: Enter the 4-digit number.  
No  
The 4-digit password number needs to be entered  
before the Parental Control Levels and the Country  
Code are set. The Parental Control Levels and the  
Country Code cannot be set if a password has not  
been created or the password is not entered.  
• Select the rating level appropriate for the age of the  
user.  
Item (Audio)  
NOTE  
Select the audio language you want to hear.  
• When you forget the password, you can reset the  
current password using “System Reset” under  
“Settings”. (See page 45.)  
Item (Menu)  
Select the menu language you want to display.  
You can also set the new password if desired.  
NOTE  
Item (Parental control level for DVD-video)  
BD Internet Access  
• When “Auto” is selected, the priority language of the  
disc will be played back.  
8 and Off: All DVD-video can be played.  
1–7: Prohibits play of DVD-video with corresponding  
ratings recorded on them.  
This allows you to set access restriction to BD-LIVE  
contents.  
Angle Mark Display  
Item  
Item (Parental control level for BD-video)  
This lets you turn the Angle Mark Display on or off  
when BD/DVD video recorded with multiple angles  
is played back. (The Angle Mark is displayed in the  
lower right screen.)  
Permit: Allows all BD-LIVE discs.  
Limit: Allows only discs with owner certification.  
Prohibit: Prohibits all BD-LIVE discs.  
No Limit: All BD-video can be played.  
0–99 year(s): Prohibits play of BD-video with  
corresponding ratings recorded on them.  
NOTE  
Item (Country code)  
Item  
• The available functions differ depending on the disc.  
• Regarding playback method of BD-LIVE contents,  
etc., perform the operations in accordance with the  
instructions in the BD disc manual.  
To enjoy BD-LIVE functions, perform the broadband  
Internet connection (pages 18–19) and communication  
settings (pages 46–49).  
Select the country code.  
The ratings differ according to the country.  
Yes, No  
NOTE  
• Refer to “Basic Operation for Playback Setting” on page  
41 for details.  
(Continued on the next page)  
44  
SETTINGS  
3D mode  
DivX Deregistration  
Version  
This sets output of 3D images.  
You can deactivate your DivX information on the  
player.  
When you select “Version”, the system software  
version and Netflix ESN are displayed.  
To view 3D images, playback of 3D content (3D BD  
video) is necessary with a 3D compatible TV and 3D  
glasses in addition to this player.  
Item  
System  
Yes, No  
Item  
System Reset  
NOTE  
Auto: Video signals are output as 3D when 3D content  
(3D BD video) is played or as 2D when 2D content is  
played.  
You can reset all settings to the factory presets.  
2D: Even if 3D content (3D BD video) is played, video  
signals are output as 2D at all times.  
Item  
VUDU Deactivate  
Reset, Not Reset  
You can deactivate your VUDU information on the  
player.  
CAUTION  
Netflix Deactivate  
• When viewing 3D images, viewing for a long period  
of time or lying on your back may cause eye strain  
and discomfort. In addition, 3D images may affect the  
eyesight of young children/infants, so keep them from  
viewing the images.  
Item  
You can deactivate your Netflix information on the  
player.  
Yes, No  
Item  
Yes, No  
3D Notice  
DivX Registration  
This sets whether or not a notice is displayed (“Yes”  
or “No”) on the connected TV every time 3D content  
(3D BD video) is played.  
The DivX registration code is displayed.  
Item  
Item  
Yes, No  
Yes, No  
NOTE  
On Screen Language  
You can set the language you want to display on the  
screen.  
Item  
English, Español, Français  
45  
SETTINGS  
4 Press a/b to select “Change”, then press  
Communication Setup  
Sets whether “Cable” or “Wireless”  
is used for the network connection  
ENTER.  
This allows you to perform and/or change the  
communication settings and select the type of  
Internet connection from Cable or Wireless. This  
setting is required to use BD-LIVE functions, video  
on-demand services (e-Contents), home networks  
and software updates that connect to the Internet.  
Current Ethernet setup info.  
1 Press a/b to select “Settings”, then press d or  
IP Address : Auto Setup  
Netmask : Auto Setup  
ENTER.  
2 Press a/b to select “Communication Setup”,  
Gateway  
DNS  
: Auto Setup  
: Auto Setup  
then press d or ENTER.  
3 Press a/b to select “Cable/Wireless Select”,  
NOTE  
Change  
Initialize  
then press d or ENTER.  
• Make sure that the LAN cable or the wireless LAN  
adapter is connected to this player and make sure that  
the wireless router/access point is connected to the  
Internet if using the wireless LAN adapter. (See pages  
18–19.)  
• For manually performing the setting, the following  
information of the connected router or modem is  
required. Confirm the information prior to the setting.  
IP address, netmask, gateway, DNS address  
4 Press a/b to select “Cable” or “Wireless”, then  
press ENTER.  
• For initializing the current setting, select “Initialize”,  
• If selecting “Cable”, follow the [When selecting  
Cable] directions on this page, then go to step 3.  
• If selecting “Wireless”, follow the [When selecting  
Wireless] directions on the next page, then go to  
step 3.  
then press ENTER.  
5 For setting the IP address, press c/d to select  
Yes” or “No”, then press ENTER.  
Do you obtain the IP address  
automatically?  
NOTE  
• When selecting “Wireless” when the wireless LAN  
adapter is not inserted, “Wireless LAN adapter is not  
inserted” appears on the screen.  
Yes  
No  
IP Address  
Netmask  
Gateway  
When selecting Cable  
Next  
1 Press a/b to select “Settings”, then press d or  
• If selecting “Yes”: The IP address is automatically  
obtained.  
• If selecting “No”: The IP address, netmask and  
gateway are manually entered using the screen for  
inputting characters. (See page 49.)  
Regarding each of the setup values, confirm the  
specifications of your broadband router.  
ENTER.  
2 Press a/b to select “Communication Setup”,  
then press d or ENTER.  
3 Press a/b to select “Ethernet Setup (Cable)”,  
then press d or ENTER.  
(Continued on the next page)  
46  
SETTINGS  
6 Select “Next”, then press ENTER.  
5 The player scans all of the available access  
points and displays the points with the “Other  
Network” selection bar on the screen.  
When selecting Wireless  
• If selecting “Yes” in the step 5, go to the step 8.  
7 Enter your DNS address.  
CAUTION  
• During searching access point(s), “Accessing...”  
appears on the screen.  
Enter your DNS address.  
• We recommend writing down the MAC address of  
the connected wireless LAN adapter in this operation  
manual (page 48) and keeping it in a safe place. The  
MAC address is labeled on the adapter or displayed on  
the “Current Ethernet setup info.” screen (See step 5  
below).  
• When performing the wireless communication setup,  
security information for the wireless router/access  
point (WEP, WPA or WPA2 key) is required. Check your  
wireless router/access point’s information prior to setup.  
• Up to 6 items (5 access points and the “Other  
Network” selection bar) are displayed on the screen.  
• When there are six or more items retrieved, display  
the next screen by selecting “Next”, then pressing  
ENTER. (The “Other Network” selection bar is  
always displayed last.) When no available access  
points are retrieved, only the “Other Network”  
selection bar is displayed on the screen.  
Primary  
Secondary  
Next  
• The primary and secondary DNS addresses are  
entered using the screen for inputting characters.  
(See page 49.)  
Regarding each of the setup values, confirm the  
specifications of your broadband router.  
6 Press a/b to select “desired access point” or  
“Other Network”, then press ENTER.  
• For access points which are set to hide the SSID  
using the wireless router, select “Other Network” to  
set the access point.  
NOTE  
• Wireless communication setup cannot be performed  
when the wireless LAN adapter is not inserted.  
• Before this player can access the Internet wirelessly,  
setup of a wireless router/access point is required.  
8 Select “Next”, then press ENTER.  
9 For testing the connection to the Internet, after  
confirming the settings, press a/b to select  
Test”, then press ENTER.  
Select the access point.  
1 Press a/b to select “Settings”, then press d or  
• “Test” is available only when setting to obtain the IP  
address automatically. “Test” cannot be selected if  
the IP address has not been obtained automatically.  
XXXXXXXXXXXX  
YYYYYYYYYYYY  
Other Network  
ENTER.  
2 Press a/b to select “Communication Setup”,  
then press d or ENTER.  
Confirm the current setting.  
3 Press a/b to select “Ethernet Setup  
• If selecting “desired access point”, go to step 9.  
• If selecting “Other Network”, go to the next step.  
IP Address : xxx xxx xxx xxx  
(Wireless)”, then press d or ENTER.  
Netmask  
Gateway  
: xxx xxx xxx xxx  
: xxx xxx xxx xxx  
4 Press a/b to select “Change”, then press  
ENTER.  
DNS Address : xxx xxx xxx xxx  
xxx xxx xxx xxx  
MAC Address : xx xx xx xx xx xx  
Current Ethernet setup info.  
Test  
MAC Address : xx xx xx xx xx xx  
Access Point : Not Selected  
IP Address : Auto Setup  
Complete  
Netmask  
Gateway  
DNS  
: Auto Setup  
: Auto Setup  
: Auto Setup  
• As a result of the test, if the Internet connection  
fails, enter the setup values manually.  
10 Press a/b to select “Complete”, then press  
ENTER.  
Change  
Initialize  
• For initializing the current setting, select “Initialize”,  
then press ENTER.  
(Continued on the next page)  
47  
SETTINGS  
7 Press ENTER, then enter the access point  
name.  
11 Select “Next”, then press ENTER.  
Information on MAC addresses  
12 For testing after confirming the settings, select  
• The access point name is manually entered using  
the screen for inputting characters. (See page 49.)  
Test”, then press ENTER.  
A MAC address is a unique ID number for  
network equipment. A MAC address is necessary  
for MAC address filtering on the wireless router/  
access point.  
• If the test has failed, an error message appears.  
Retry to perform the settings after checking that the  
connection (page 19) is performed properly.  
Enter the access point name.  
Confirm your setting.  
Access Point:  
Before the wireless communication setup is  
performed, we recommend writing down the MAC  
address of the connected wireless LAN adapter  
and keeping it in a safe place. The MAC address  
is labeled on the adapter. (The MAC address is  
displayed on the “Current Ethernet setup info.”  
screen when wireless communication is set (See  
step 4 of page 47).)  
Access Point: XXXXXXXXXXXX  
Security key: XXXXXXXXXXXX  
Next  
Test  
8 Select “Next”, then press ENTER.  
9 Press a/b to select your appropriate security  
13 Follow steps 5–10 of “When selecting Cable”  
on page 46 to complete the network connection  
settings.  
key, then press ENTER.  
• When selecting WPA/WPA2, selectable security  
keys are PSK/TKIP and PSK/AES.  
MAC address  
Select the security key.  
OPEN  
WEP  
WPA-PSK(AES)  
WPA-PSK(TKIP)  
WPA2-PSK(AES)  
WPA2-PSK(TKIP)  
10 Press ENTER, then enter the security key code.  
• Enter the exact same security key which has been  
set in the wireless router.  
• The security key code is manually entered using the  
screen for inputting characters. (See page 49.)  
Enter the security key.  
Security key:  
Next  
48  
SETTINGS  
4 Repeat the step 3 to display all of the desired  
5 Press D (Yellow) (Complete) to fix the numbers  
The operation procedure for  
inputting characters manually  
characters/numbers in the input field.  
which have been input.  
Example: The screen for inputting numeric characters  
IP Address  
Netmask  
Gateway  
123  
NOTE  
123  
Numeric  
Edit  
• Numeric characters such as IP address can be entered  
on the input screen either by selecting each of the  
characters in the “Numeric” mode or using the Number  
buttons on the remote control.  
1
2
3
4
5
6
7
8
9
0
6 Repeat step 1 to 5 to finish inputting all the  
required characters.  
NOTE  
• Press j (Del.Char.) to delete a number/  
character you have input.  
To change a number/character you have input, press B  
(Green) (Left) or C (Blue) (Right) to select the number/  
character you want to change, and press j  
(Del.Char.). Then, press c/d to select a new number/  
character you want to input, and press ENTER.  
IP Address  
Netmask  
Gateway  
123  
1 Press ENTER at the boxes in which characters  
are to be entered, and the input screen will  
appear.  
Input character list  
Numeric  
Edit  
1ABC (Alphabet/  
numeric character)  
Num.  
ABC  
DEF  
GHI  
JKL  
MNO  
PQRS  
DEF  
TUV  
WXYZ  
Spc.  
1
2
3
4
5
6
7
8
9
0
Num. 1 2 3 4 5 6 7 8 9 0 ABC  
A B C a b c  
J K L j k l  
D E F d e f  
Selected by pressing Selected by pressing  
a/b c/d  
GHI  
G H I g h i  
JKL  
TUV  
MNO M N O m n o  
PQRS P Q R S p q r s  
T U V t u v  
WXYZ W X Y Z w x y z  
2 Press a/b to select the desired input mode.  
Spc.  
(space)  
3 Press c/d to select a number/character, then  
press ENTER.  
Numeric  
Sign  
1 2 3 4 5 6 7 8 9 0  
@ . , :  
@ . , :  
; _ - \  
$ % ! ? & # + *  
= / | ˜  
“ ‘ ˆ `  
( ) < >  
[ ]{ }  
Spc.  
@ . , :  
; _ - \  
= / | ˜  
; _ - \  
= / | ˜  
$ % ! ? $ % ! ?  
& # + * & # + *  
( ) < > ) <  
“ ‘ ˆ `  
Spc.  
“ ‘ ˆ `  
(space)  
(
>
[ ]{ }  
[
]
{
}
Edit  
Cancel  
Left  
Right  
Complete  
Del.Char.  
The same operation as the colored buttons and j can be performed by selecting  
each of the items and pressing ENTER.  
“Del.Char.” stands for deleting characters.  
49  
SETTINGS  
When you insert or remove a USB memory device,  
be sure to turn the main power off and make sure  
that “Quick Start” is set to “No” (See page 43).  
4 Press a/b to select “Erase” or “Format”, then  
Before using the USB memory device  
press ENTER.  
CAUTION:  
Erase: Deletes only BD-VIDEO data written on the  
USB memory device such as BD-LIVE data.  
• Do not remove the USB memory device or unplug  
the AC cord while the operations for “USB Memory  
Management” or “Software Update (Manual Update  
from USB memory device)” are being performed.  
• Do not use a USB extension cable when connecting  
a USB memory device to the USB1 or USB2 terminal  
on the player.  
1 Insert the USB memory device into the USB  
terminal on this player.  
Format: Be aware that all data including BD-VIDEO  
data and software update data will be deleted.  
• When the wireless LAN adapter is not inserted  
into the USB1 terminal on the rear of the player, it  
is recommended that the USB memory device be  
connected to the USB1 terminal.  
• If you want to delete only the unneeded software  
update data after the software is updated, delete  
the data on the USB memory device using a PC.  
Using a USB extension cable may prevent the  
player from performing correctly.  
NOTE  
• A USB memory device can be used with either the  
USB1 or USB2 terminal. When two USB memory  
devices are connected to both terminals at the same  
time, in certain situations the USB1 terminal may give  
priority to Local Storage and “Erase” and “Format” are  
not available for the USB memory device connected to  
the USB2 terminal.  
NOTE:  
• SHARP cannot guarantee that all brands’ USB  
memory devices will operate with this player.  
• Only USB memory devices formatted with FAT 32/16  
are compatible.  
Erase  
Erases BD-VIDEO data on USB memory.  
Format  
Erase all contents on USB memory  
including protected contents.  
When formatting a USB memory device using a PC,  
perform the following settings.  
Format File System: FAT32  
Allocation Unit Size: Default Allocation Size  
Rear  
5 Press a/b to select “Yes”, then press ENTER.  
• A confirmation message is displayed. Check that  
the correct USB memory device is displayed, and  
then continue.  
USB Memory Management  
6 Start the process.  
The following instructions explain how to delete data  
such as the Virtual Package data and the BD-LIVE  
data in a USB memory device.  
• The screen for the current operation will display.  
USB memory device  
2 Press a/b to select “Settings”, then press d or  
Complete  
OK  
ENTER.  
3 Press a/b to select “USB Memory  
Management”, then press d or ENTER.  
• The “USB Memory Management” screen is  
displayed.  
7 Press ENTER.  
• “No USB Memory” appears when no USB memory  
is inserted.  
NOTE  
• Data which has been saved to the player’s internal  
memory (game score, etc.) will also be deleted.  
50  
SETTINGS  
Update process  
Software Update Settings  
1 When this player is turned on, the Internet  
connection starts automatically.  
In this player, the software version can be updated  
using either one of the following methods.  
• Auto Update from Network  
• “Accessing...” blinks on the screen.  
• Manual Update from Network  
• Manual Update from USB memory device  
• The current version of this unit software and the  
latest version of the update file on the network are  
displayed when latest version of firmware has been  
found.  
Auto Update from Network  
This function allows you to perform the update by  
accessing an Internet connection automatically to  
check if there is a new firmware version every time  
the player is turned on.  
When using this function, it is required to perform  
the following settings in advance.  
To update this player software with update file,  
select “Yes”, and go to step 2.  
Latest version of firmware has been found.  
Firmware update is available.  
Proceed with update?  
Setup  
1 Press a/b to select “Settings”, then press d or  
Current Version :  
Latest Version :  
xxxxxxxxxx  
yyyyyyyyyy  
ENTER.  
NOTE  
If “Yes” will be selected, version update will start.  
2 Press a/b to select “Software Update  
• Make sure that the LAN cable or the wireless LAN  
adapter is connected to this player and make sure that  
the wireless router/access point is connected to the  
Internet if using the wireless LAN adapter. (See pages  
18–19.)  
• Make sure to perform the communication settings. (See  
pages 46–49.)  
Settings”, then press d or ENTER.  
Yes  
No  
3 Press a/b to select “Auto Update Setting”,  
then press d or ENTER.  
• If the latest firmware version has been already  
updated, nothing is displayed on the screen.  
4 Press a/b to select “Yes”, then press ENTER.  
• After this, an Internet connection will be made  
automatically every time this player is turned on.  
2 Press ENTER to start updating.  
• It may take time to access and download the update  
depending on the Internet connection and other factors.  
Downloading latest firmware…  
Version : yyyyyyyyyy  
CAUTION  
• Do not remove the LAN cable or the wireless LAN  
adapter or unplug the AC cord while downloading or  
updating software.  
30%  
3 When the software is successfully updated, a  
screen is displayed indicating that the update  
process is completed.  
• If the update has failed, an error message appears.  
Retry the update after checking if the broadband  
Internet connection (pages 18–19) and  
communication settings (pages 46–49) are  
performed properly.  
4 Press POWER to turn off the player before using  
again.  
51  
SETTINGS  
6 Press ENTER to start updating.  
1 Press a/b to select “Settings”, then press d or  
Manual Update from Network  
ENTER.  
Downloading latest firmware…  
Version : yyyyyyyyyy  
2 Press a/b to select “Software Update  
This function allows you to perform the update  
operation by accessing an Internet connection  
manually to check if there is a new firmware version.  
Settings”, then press d or ENTER.  
3 Press a/b to select “Manual Update”, then  
press d or ENTER.  
30%  
NOTE  
4 Press a/b to select “Network”, then press  
• Make sure that the LAN cable or the wireless LAN  
adapter is connected to this player and make sure that  
the wireless router/access point is connected to the  
Internet if using the wireless LAN adapter. (See pages  
18–19.)  
• Make sure to perform the communication settings. (See  
pages 46–49.)  
ENTER.  
7 When the software is successfully updated, a  
screen is displayed indicating that the update  
process is completed.  
5 During access to the network and checking the  
latest version of firmware, “Accessing” blinks.  
• The current version of this unit software and the  
latest version of the update file on the network are  
displayed when latest version of firmware has been  
found.  
• If the update has failed, an error message appears.  
Retry the update after checking if the broadband  
Internet connection (pages 18–19) and  
communication settings (pages 46–49) are  
performed properly.  
• It may take time to access and download the update  
depending on the Internet connection and other factors.  
To update this player software with update file,  
select “Yes”, and go to step 6.  
8 Press POWER to turn off the player.  
CAUTION  
Latest version of firmware has been found.  
Firmware update is available.  
Proceed with update?  
• Do not remove the LAN cable or the wireless LAN  
adapter or unplug the AC cord while downloading or  
updating software.  
Manual Update from USB memory  
device  
Current Version :  
Latest Version :  
xxxxxxxxxx  
yyyyyyyyyy  
This function allows software updates by inserting  
a USB memory device with the update file into the  
USB1 or USB2 terminal on this player.  
• When a software update is performed, the software  
update data must be written onto the USB memory  
device in advance using a PC.  
• The USB memory device must be clear of all files  
except software update data to allow new software  
uploading.  
If “Yes” will be selected, version update will start.  
Yes  
No  
• If the Internet connection has failed, an error  
message appears.  
Retry the update after checking if the broadband  
Internet connection (pages 18–19) and  
communication settings (pages 46–49) are  
performed properly.  
To check for the availability of a software update,  
you have any questions, please call 1-800-BE-  
SHARP (800-237-4277).  
• When software update data is released, copy the data  
onto a USB memory device after downloading it to a  
PC.  
• For methods such as downloading and copying to a  
USB memory device, carefully read the description  
shown on the website before performing the operation.  
(Continued on the next page)  
52  
SETTINGS  
1 Insert the USB memory device with the update  
file into the USB1 or USB2 terminal on this  
player.  
6 Enter the 4-digit number using 0–9.  
NOTE  
• Only USB memory devices formatted with FAT 32/16 are  
compatible.  
When formatting a USB memory device using a PC,  
perform the following settings.  
Enter 4-digit password  
• It is recommended that the USB memory  
device be connected to the USB2 terminal on  
the front of the player.  
Format File System: FAT32  
Allocation Unit Size: Default Allocation Size  
• Do not extract the firmware update file to any folders  
other than the root directory on the USB memory  
device. The firmware update file must be only one file  
directly in the root directory.  
NOTE  
7 Press ENTER to start checking data in the USB  
• A USB memory device can be used with either the  
USB1 or USB2 terminal. When two USB memory  
devices are connected to both terminals at the same  
time, in certain situations the USB1 terminal may give  
priority to Local Storage and the USB1 terminal cannot  
be used for Software Update.  
memory device.  
Insert USB memory device containing  
the software update file.  
OK  
8 During the data checking, “Checking” blinks.  
Now checking the data in USB memory device.  
Checking  
Front  
USB memory device  
2 Press a/b to select “Settings”, then press d or  
• The current version of this unit software and the  
version of the update file on the USB memory  
device are displayed. To update this player software  
with update file, select “Yes”, and press ENTER.  
ENTER.  
3 Press a/b to select “Software Update  
CAUTION  
Settings”, then press d or ENTER.  
• Do not remove the USB memory device or unplug the  
AC cord while the software is being updated.  
Software update file is detected in the USB memory device.  
Start update?  
4 Press a/b to select “Manual Update”, then  
press d or ENTER.  
5 Press a/b to select “USB Memory”, then press  
When you insert or remove a USB memory device,  
be sure to turn the main power off and make sure  
that “Quick Start” is set to “No” (See page 43).  
Current Ver. :  
Update Ver. :  
xxxxxxxxxx  
yyyyyyyyyy  
ENTER.  
• If you have not yet set the password, go to step 7.  
Yes  
No  
(Continued on the next page)  
53  
SETTINGS  
• If the USB memory device is not properly installed  
9 Press ENTER to start updating.  
• The screen becomes dark for a while until the  
update screen can be displayed. Please wait for  
the update screen to appear. Do not unplug the AC  
cord.  
10 When the software is successfully updated, a  
screen is displayed indicating that the update  
process is completed.  
or the correct update file cannot be found on  
the USB memory device, an error message is  
displayed.  
Check the file on the USB memory device, and then  
reinsert the USB memory device correctly.  
• If the update has failed, check the file in the USB  
device and try Software Update again.  
11 Press POWER to turn off the player.  
• Delete unneeded software update data using a PC  
after the software update process is completed.  
The picture will temporarily go dark until  
the software update display appears.  
Wait several minutes and do not unplug the AC cord.  
Software update file is not detected in the USB memory device.  
Confirm that you have transferred the file  
to the USB memory device and retry software update.  
Confirm that you have inserted the USB memory device  
into the correct device.  
12 Remove the USB memory device.  
OK  
OK  
There is more than one software file  
in the USB memory device.  
Confirm that only the software update file is  
in the USB memory device.  
Now updating  
Do not unplug AC cord.  
*
Update Version  
yyyyyyyyyy  
OK  
30%  
About Output of Next Generation Audio Formats  
HDMI  
DIGITAL OUT  
Next generation  
audio formats  
Maximum number of  
channels  
PCM  
Bitstream  
PCM  
2ch *2  
2ch *2  
2ch *2  
2ch *2  
2ch *2  
2ch *2  
2ch *2  
2ch *2  
Bitstream  
5.1ch *1/*3  
5.1ch *1/*3  
5.1ch *1/*3  
5.1ch *1/*3  
5.1ch *1/*3  
5.1ch *1/*3  
Dolby TrueHD  
7.1ch (48kHz/96kHz)  
5.1ch (192kHz)  
7.1ch *3  
5.1ch *3  
7.1ch *3  
7.1ch *3  
5.1ch *3/*5  
7.1ch *3  
7.1ch *3  
5.1ch *3  
7.1ch *4  
5.1ch *4  
7.1ch *4  
7.1ch *4  
5.1ch *4  
7.1ch *4  
Dolby Digital PLUS  
7.1ch (48kHz)  
DTS-HD Master Audio  
7.1ch (48kHz/96kHz)  
5.1ch (192kHz)  
DTS-HD High Resolution Audio  
LPCM  
7.1ch (48kHz/96kHz)  
7.1ch (48kHz/96kHz)  
5.1ch (192kHz)  
I
Core only  
J
K
L
M
M
Down mixed  
When “Secondary Audio” is set to “On”, the audio is output as 48kHz.  
When “Secondary Audio” is set to “On”, the audio is output as PCM.  
When 5.1ch (192kHz), the audio output is downsampled to 96kHz.  
When 2ch, the audio is output as 192kHz.  
54  
Streaming content  
Playing back video on demand streaming content  
In this player, you can enjoy a variety of video on  
demand streaming content by connecting to the  
Internet.  
3 Follow the instruction on the screen.  
4 To exit the screen;  
Playing back YouTube content  
This player can play back YouTube video content  
streaming through the Internet.  
• For more information about YouTube, see the YouTube  
website using a PC (http://www.youtube.com).  
Netflix: Press EXIT.  
VOD content  
VUDU: Press HOME.  
YouTube: Press EXIT.  
Video  
NOTE  
Instantly Watching Movies from  
Netflix  
Music  
• Some video content may not be played back with this  
player.  
• The actual functions which can be operated may differ  
from the descriptions shown.  
Picture  
e-Contents  
Settings  
Please check that the most current software  
is loaded on this player by using the software  
update function (See pages 51–54) or by visiting  
check for a download of the newest software  
version.  
Operational buttons for playback control  
Item  
VOD content  
Netflix  
• Instantly Watching Movies  
Pause the video content. To resume  
playing paused content, press  
the playback controls.  
on  
This function allows you to enjoy Netflix through the  
Internet.  
Netflix is an online DVD and Blu-ray Disc rental  
service, offering rental-by mail and streaming  
instantly to Netflix unlimited members.  
VUDU  
Skip to the previous video content on  
the video list.  
• Enjoying Movies and Internet Application  
YouTube  
Skip to the next video content on the  
video list.  
• Playing back YouTube video content streaming  
NOTE  
NOTE  
Play back all the video content on the  
video list repeatedly.  
To enjoy this function, make a broadband Internet  
connection to both your PC and this player (See pages  
18–19), and then set communication settings (See  
pages 46–49), then perform the following operation.  
To use this function, we recommend setting “Auto  
Power Off” to “No” before starting the registration. (See  
page 43.)  
• Disc playback and this function cannot be used at the  
same time.  
• As the registration process takes time, we recommend  
setting “Auto Power Off” to “No” before starting the  
registration. (See page 43.)  
• The streaming quality (SD or HD) depends on the  
network speed and original bit rate of the title.  
netflix.com/help or login to your Netflix account and  
click “Help” at the top of the page.  
Switch the video quality to high  
resolution.  
Toggle the playback screen between  
normal and full screen.  
• Before using this function, please read “Network Service  
Disclaimer” (page 69).  
Determine the point where you want to  
play back a video content by pressing  
c/d on the progress bar.  
Progress bar  
• Netflix is only available in the US.  
Playing back  
NOTE  
1 Press a/b to select “e-Contents”, then press  
To turn the playback controls on during full screen  
display, press POP-UP MENU.  
To return to the main page screen, press TOP MENU/  
TITLE LIST.  
The buttons which can be used :  
a/b/c/d / ENTER / a / b /  
c / d / e / j /  
EXIT  
d or ENTER.  
2 Press a/b to select the desired steaming  
content, then press d or ENTER.  
• The screen of the streaming content which you  
select is displayed.  
55  
Playing back streaming content  
VUDU Customer Care: When you need to talk live  
with someone, contact VUDU Customer Care at  
1-888-554-VUDU (8838) 7 a.m. to 8 p.m. Pacific, 7  
days a week (except holidays).  
NOTE  
Enjoying Movies and Internet  
Application with VUDU  
Your Internet connection is vital to your VUDU  
experience. Please refer to the chart below for minimum  
bandwidth requirements:  
SD (DVD quality): 480p 1 Mbps to 2 Mbps  
HD (HDTV quality): 720p 2.25 Mbps to 4.5 Mbps  
HDX (BD quality): 1080p 4.5 Mbps to 9 Mbps  
• VUDU Movies is only available in the U.S.  
• For more information on VUDU, visit http://www.VUDU.  
com.  
You can enjoy moves and Internet applications with  
VUDU.  
VUDU Movies is the leading HD on-demand video  
service. VUDU Movies is built into your BD Player  
and utilizes your existing Internet connection  
to deliver the highest quality on-demand video  
available today.  
Operational buttons during playback  
Buttons  
S
d
Description  
Hold down to go in reverse.  
Starts playback.  
• Disc playback and this function cannot be used at the  
same time.  
Hold down to fast forward.  
Playback stops.  
V
H
Example  
Troubleshooting - VUDU  
Sets pauses and still pictures.  
F
Pressing quickly once takes you to the  
start of the chapter currently playing.  
Each time you press it, you move back  
to the start of the previous chapter.  
T
VUDU cannot be accessed.  
• If you are not able to access other network service (e.g.  
BD-LIVE) from your device, but are not able to access  
VUDU, please contact VUDU Customer Care at 1-888-  
554-VUDU (8838).  
Pressing quickly once takes you to the  
start of the next chapter. Each time you  
press it, you move ahead to the start of  
the next chapter.  
U
• If you are not able to access any network service (e.g.  
BD-LIVE) from your device, please contact your device  
manufacture for assistance.  
VUDU Movies features:  
The activation e-mail was not obtained.  
• Check your junk or spam e-mail folders. If you are  
unable to find the activation e-mail in the folders,  
reconfirm the e-mail address you have entered, and  
then try your account settings again.  
True 1080p HD, the only service to offer 1080p quality  
video on-demand  
• Over 16,000 titles available on-demand  
• Over 3,000 titles available in HD, more than are available  
anywhere else  
• 5.1 surround sound, delivered through state-of-the-art  
Dolby Digital Plus  
• The latest Hollywood hits available the same day as  
DVD  
If you encounter any other issues during activation,  
refer to the following online resources:  
Detailed VUDU Manual: Available at  
to all aspects of the revolutionary VUDU service  
with easy-to-follow instructions.i  
• No subscription fees required  
VUDU FAQ: To learn more about VUDU, visit the  
Frequently Asked Questions at  
56  
Appendix  
Troubleshooting  
The following problems do not always suggest a defect or malfunction of this Player.  
Refer to the problems and lists of possible solutions below before calling for service.  
Power  
Problem  
Possible causes and solutions  
The Player power cannot be turned on.  
• Is the power cord firmly plugged into the AC outlet? (Page 20)  
• When the power cord is plugged into an AC outlet, press and hold POWER on the Player until “  
front panel display. Then, after the POWER indicator is lit, turn on the power. (Page 60)  
” appears on the  
• Press POWER after the POWER indicator turns on. (Page 21)  
The Player power is turned off.  
• Is “Auto Power Off” set to “Yes”? When “Auto Power Off” is set to “Yes”, the power will be automatically turned off after  
10 continuous minutes of inactivity (no playback). (Page 43)  
Basic Operation  
Problem  
Possible causes and solutions  
The remote control does not work.  
• Use the remote control within its operating range. (Page 20)  
• Replace the batteries. (Page 20)  
• Reset the remote control.  
Press and hold 1 (the number button) first and then POWER on the remote control together for more than 5 seconds.  
Cannot operate the Player.  
• Are you operating the Player within the specified operating temperature range? (Page 64)  
Playback  
Problem  
Possible causes and solutions  
The Player cannot play a disc.  
Take out the disc and clean it. (Page 13)  
• Make sure that the disc is loaded properly (aligned in disc tray and label-side up). (Page 25)  
• Make sure that region code on the disc matches that of this Player. (Page 9)  
• Allow any condensation in or near the Player to dry. (Page 13)  
• Check that the disc is recorded in the compatible TV system (PAL or NTSC).  
• The Player cannot play back video which was not recorded normally. (Page 10)  
• Proper playback may be impossible due to the state of the disc recording, a scratched, warped or dirty disc, the state of  
the pick-up, or compatibility issues between this Player and the disc being used. (Pages 10, 13)  
• When the recorded time of a disc is unusually short, playback may not be possible.  
• BD-RE/R discs recorded in a format other than BDMV/BDAV cannot be played back. (Page 9)  
The disc is automatically ejected after closing the disc  
tray.  
• Make sure that the disc is loaded properly (aligned in disc tray and label-side up). (Page 25)  
Take out the disc and clean it. (Page 13)  
• Make sure that the disc is playable. (Page 9)  
(Continued on the next page)  
57  
Troubleshooting  
Playback (Continued)  
Problem  
Possible causes and solutions  
Video stops.  
• Has the Player been subjected to shock or impact? Are you using it in an unstable location? The Player will stop if it  
senses shock or vibration.  
The Player makes a snapping sound when starting  
playback or loading a disc.  
• The player may sometimes make a snapping sound when starting playback if it has not been operated in a while. These  
sounds are not malfunctions of the player but are normal operating conditions.  
Picture  
Problem  
Possible causes and solutions  
No picture.  
• Make sure that the cable is connected correctly. (Page 16)  
• Make sure that the connected TV or the AV receiver is set to the correct input. (Pages 16–17)  
Take out the disc and clean it. (Page 13)  
• Make sure that region code on the disc matches that of this Player. (Page 9)  
• There is no picture from the HDMI output.  
Are the settings performed correctly? Please check the settings. (Page 42)  
Screen freezes and operation buttons do not work.  
Square noise (mosaic) appears on the screen.  
Turn off the power and turn on the power again.  
• If the power is not turned off, perform a reset. (Page 62)  
• Is the disc damaged or dirty? Check the condition of the disc. (Page 13)  
• Blocks in images may be visible in scenes with rapid movement due to the characteristics of digital image compression  
technology.  
Audio is not output, or images are not played back  
properly.  
• The audio may not be output or the images may not be played back properly for some discs in which copyright-  
protected contents are recorded.  
3D images cannot be output to a TV.  
• Is an HDMI cable used?  
• Are a 3D compatible TV and 3D glasses used?  
• Is a proper connection made between the HDMI OUT terminal of the player and the HDMI input terminal of the 3D  
compatible TV?  
• Is the 3D setting on this player correct? (Pages 23, 44)  
• Is the 3D setting on the TV correct?  
• Is a 3D compatible BD disc being played back?  
Noise appears on the screen.  
• When you watch TV broadcasts with the power of this player turned on, noise may appear on the TV screen. In such  
cases, turn off the power to this player or keep this player away from the TV.  
58  
Troubleshooting  
Sound  
Problem  
Possible causes and solutions  
No sound, or sound is distorted.  
• If the volume of the TV or amplifier is set to minimum, turn the volume up.  
• There is no sound during still mode, slow motion playback, fast forward and fast reverse. (Page 35)  
• DVD audio recorded in DTS is only output from the DIGITAL AUDIO OUT terminal. Connect a DTS compatible digital  
amplifier or decoder to the DIGITAL AUDIO OUT OPTICAL terminal on this Player. (Page 17)  
• Check that the audio cable is connected correctly. (Page 17)  
• Check that the cable plugs are clean.  
Take out the disc and clean it. (Page 13)  
• Audio may not be output depending on the audio recording status, such as when audio other than an audio signal or  
non-standard audio is recorded for the audio content of the disc. (Page 10)  
Audio is not output, or images are not played back  
properly.  
• The audio may not be output or the images may not be played back properly for some discs in which copyright-  
protected contents are recorded.  
Network  
Problem  
Possible causes and solutions  
Cannot connect to the Internet.  
When the wired Internet connection is made  
• Is the LAN cable connected properly?  
• Is the wrong cable such as a modular cable used? Connect a LAN cable to the ETHERNET terminal. (Page 18)  
• Is the power for the connected equipment, such as a broadband router or modem turned on?  
• Is the broadband router and/or modem properly connected?  
• Is the proper value(s) set in the network setting? Check “Communication Setup”. (Pages 46–49)  
When the wireless Internet connection is made  
• Is the wireless LAN adapter connected properly?  
• Is the power for the connected equipment, such as a wireless router or access point turned on?  
• Is the wireless router or access point properly connected?  
• Are there any obstacles, such as physical structures (brick and concrete walls, etc.) and electronics (microwave, etc.)  
between the wireless router/access point and the player? As this may cause interference with the wireless signal, make  
sure to keep obstacles away.  
• Is the proper value(s) set in the network setting? Check “Communication Setup”. (Pages 46–49)  
Cannot download BD-LIVE contents.  
• Is the LAN cable or the wireless LAN adapter connected properly?  
• Is the USB memory device properly connected? Check that the USB memory device is connected to the USB1 or USB2  
terminal of this Player.  
• Check if the BD disc supports BD-LIVE.  
• Check the setting for “BD Internet Access”. (Page 44)  
(Continued on the next page)  
59  
Troubleshooting  
Other  
Problem  
Possible causes and solutions  
The TV operates incorrectly.  
• Some TVs with wireless remote control capability may operate incorrectly when using the remote control of this Player.  
Use such TVs away from this Player.  
The Player heats up during use.  
• When using this Player, the console cabinet may heat up depending on the usage environment. This is not a malfunction.  
POWER (ON/STANDBY) indicator will remain lit.  
• When the AC cord is removed from the outlet, the POWER (ON/STANDBY) indicator will remain lit for a short period. This  
is normal and is not a malfunction.  
POWER  
To Reset this Player  
• If this Player receives strong interference from a source such as excessive static electricity, strong external noise, malfunction of power supply, or  
voltage caused by lightning during use or a wrong operation is sent to the Player, errors like the Player not accepting an operation may occur.  
Press and hold POWER on the Player until “  
” appears on the front panel display when the Player does not operate properly even after  
the power has been turned off. Then, after the POWER indicator is lit, turn on the power.  
• When a reset is performed while the power is on, the Player will turn off. Turn the power on again. At this point, it may take a few moments for the system processing to finish before  
the Player is ready for use. During the system processing, the BD/DVD/CD mode indicator on the front panel display of the player will blink. Once the system processing has finished,  
the indicator will finish blinking and then light up normally. You can operate the Player when the BD/DVD/CD mode indicator is lit.  
• Since all settings including the language setting stored in memory are also reset when a reset has been performed, they must be set again.  
• When the problem persists even after performing a reset, unplug the AC cord and plug it in again. If this does not solve the problem, contact the nearest service center approved by  
SHARP.  
60  
On-screen Error Messages  
The following messages appear on the TV screen in case of an error during operation.  
Error message  
Possible Error  
Suggested Solution  
Cannot play.  
• The disc cannot be played back with this Player.  
• Check the disc, and load it correctly.  
Incompatible disc.  
• If you load a disc which cannot be played with this  
Player (i.e. a scratched disc), or if you load a disc upside  
down, this message will appear, and the disc tray will  
automatically pop out.  
• Occurs if the loaded disc cannot be played because it is • Remove the disc.  
a non-standard disc or scratched, etc.  
Cannot operate.  
• Occurs if an operation is incorrect.  
This USB memory is not formatted properly. Please format • Occurs if there is a formatting error.  
the memory in USB memory management. • Occurs if the USB memory is not formatted with FAT  
32/16.  
• Format the USB memory again.  
• Format the USB memory with your PC.  
The Connected USB Memory cannot be used. It should be • Occurs if USB memory not compliant with USB 2.0 High • Connect USB 2.0 High Speed (480Mbit/s) compliant  
compliant with USB 2.0 Speed (480Mbit/s) is used (i.e. USB 1.0/USB 1.1). USB memory.  
61  
Specifications  
Specifications are subject to change without notice.  
General  
Power supply  
AC 120 V, 60 Hz  
Power consumption (Normal)  
Power consumption (Standby)  
Dimensions  
15 W  
0.3 W (When “Quick Start” is set to “No”)  
Approx. 16 15 16 g 1 15 16 g 7 13  
/ / /16 inch (W g H g D)  
Approx. 430 mm g 49 mm g 198 mm (W g H g D)  
Weight  
Approx. 5.1 lbs. (2.3 kg)  
Operating temperature  
Storage temperature  
Operating humidity  
TV systems  
41°F to 95°F (5°C to 35°C)  
–4°F to 140°F (–20°C to 60°C)  
10 % to 80 % (no condensation)  
NTSC system  
Playback  
Playable discs/media formats  
BD-ROM, BD-RE, BD-R,  
DVD Video, DVD+RW/+R/-RW/-R (Video/VR/AVCHD/JPEG file/MP3 file/DivX format),  
Audio CD (CD-DA), CD-RW/R (CD-DA/JPEG file/MP3 file/DivX format)  
USB memoy device (JPEG file/MP3 file format)  
Region code  
A or ALL for BD, 1 or ALL for DVD  
Input/Output  
HDMI  
HDMI 19-pin standard connector (1080p 24Hz output)  
HDMI® (Deep Color, x.v.Color, Dolby TrueHD, DTS-HD Master Audio | Essential)  
Digital audio optical output  
USB input  
Terminal: Square Optical terminal  
USB1/USB2  
USB 2.0 High Speed (480Mbit/s) correspondence (for Local storage/Software update/JPEG, MP3 and DivX playback)  
ETHERNET  
10BASE-T/100BASE-TX  
62  
Glossary  
This Player is compatible with Deep Color. You can  
enjoy this function by connecting to a Deep Color  
compatible TV using an HDMI cable.  
Ad-hoc mode (page 19)  
BD-RE (pages 9, 25)  
Ad-hoc mode is a wireless LAN communication  
format. This performs direct communication  
between equipment without an access point. (Ad-  
hoc mode is not supported.)  
A BD-RE (Blu-ray Disc Rewritable) is a recordable  
and rewritable Blu-ray Disc.  
Disc menu (page 26)  
BD-ROM  
This lets you select things like the subtitle language  
or audio format using a menu stored on the DVD  
video disc.  
BD-ROMs (Blu-ray Disc Read-Only Memory)  
are commercially produced discs. Other than  
conventional movie and video contents, these discs  
have enhanced features such as interactive content,  
menu operations using pop-up menus, selection of  
subtitle display, and slide shows. Although a BD-  
ROM may contain any form of data, most BD-ROM  
discs will contain movies in High Definition format  
for playback on Blu-ray Disc players.  
AVCHD (page 9)  
AVCHD (Advanced Video Codec High Definition)  
refers to a recording format (specification) for digital  
video cameras which can record to a disc such as  
8 cm DVD disc and play back digital high definition  
images.  
Dolby Digital  
A sound system developed by Dolby Laboratories  
Inc. that gives movie theater ambience to audio  
output when the product is connected to a Dolby  
Digital processor or amplifier.  
BDAV (page 9)  
BDAV (Blu-ray Disc Audio/Visual, BD-AV) refers to  
one of the application formats used for writable  
Blu-ray discs such as BD-R, BD-RE, etc. BDAV is a  
recording format equivalent to DVD-VR (VR mode) of  
the DVD specifications.  
Dolby Digital Plus  
Blu-ray Disc (BD) (page 9)  
A sound system developed as an extension to Dolby  
Digital. This audio coding technology supports 7.1  
multi-channel surround sound.  
A disc format developed for recording/playing high-  
definition (HD) video (for HDTV, etc.), and for storing  
large amounts of data. A single layer Blu-ray Disc  
holds up to 25 GB, and a dual-layer Blu-ray Disc  
holds up to 50 GB of data.  
Dolby TrueHD  
BD-J application  
Dolby TrueHD is a lossless coding technology that  
supports up to 8 channels of multi-channel surround  
sound for the next generation optical discs. The  
reproduced sound is true to the original source bit-  
for-bit.  
The BD-ROM format supports Java for interactive  
functions. “BD-J” offers content providers almost  
unlimited functionality when creating interactive BD-  
ROM titles.  
Chapter number (pages 38, 39)  
Sections of a movie or a music feature that are  
smaller than titles. A title is composed of several  
chapters. Some discs may only be comprised of a  
single chapter.  
BD-LIVE (page 28)  
DTS  
A variety of interactive content is available from BD-  
LIVE compatible Blu-ray discs via the Internet.  
This is a digital sound system developed by DTS,  
Inc. for use in cinemas.  
Control Panel (page 24)  
This function allows you to operate this player using  
the TV remote control by displaying the control  
panel on the TV screen.  
BDMV (page 9)  
DTS-HD High Resolution Audio  
DTS-HD High Resolution Audio is a new technology  
developed for the next generation high definition  
optical disc format.  
BDMV (Blu-ray Disc Movie, BD-MV) refers to one  
of the application formats used for BD-ROM which  
is one of the Blu-ray Disc specifications. BDMV is  
a recording format equivalent to DVD-video of the  
DVD specification.  
Copy guard  
This function prevents copying. You cannot copy  
discs marked by the copyright holder with a signal  
which prevents copying.  
DTS-HD Master Audio  
DTS-HD Master Audio is a lossless audio  
compression technology developed for the next  
generation high definition optical disc format.  
BD-R (pages 9, 25)  
A BD-R (Blu-ray Disc Recordable) is a recordable,  
write-once Blu-ray Disc. Since contents can be  
recorded and cannot be overwritten, a BD-R can be  
used to archive data or for storing and distributing  
video material.  
Deep Color  
Deep Color can reproduce rich colors, increasing  
the number of bits describing colors.  
63  
Glossary  
DTS-HD Master Audio | Essential  
DVD+/-RW (pages 9, 25)  
Linear PCM Sound  
DTS-HD Master Audio | Essential is a lossless audio  
compression technology developed for the next  
generation high definition optical disc format.  
A DVD+/-RW is a recordable and rewritable DVD.  
The re-recordable feature makes editing possible.  
The DVD+/-RW has two different formats: VR format  
and Video format. DVDs created in Video format  
have the same format as a DVD video, while discs  
created in VR (Video Recording) format allow the  
contents to be programed or edited.  
Linear PCM is a signal recording format used for  
Audio CDs and on some DVD and Blu-ray discs. The  
sound on Audio CDs is recorded at 44.1 kHz with  
16 bits. (Sound is recorded between 48 kHz with 16  
bits and 96 kHz with 24 bits on DVD video discs and  
between 48 kHz with 16 bits and 192 kHz with 24  
bits on BD video discs.)  
DVD upscaling (page 25)  
Upscaling (upconverting) refers to a function of  
various players and devices that enlarge the image  
size to fit the size of the screen of video equipments  
such as a TV.  
HDMI (page 16)  
MP3 (pages 9–11, 32, 34)  
HDMI (High-Definition Multimedia Interface) is an  
interface that supports both video and audio on  
a single digital connection. The HDMI connection  
carries standard to high definition video signals  
and multi-channel audio signals to AV components  
such as HDMI equipped TVs, in digital form without  
degradation.  
MP3 files are audio data compressed in the  
MPEG1/2 Audio layer-3 file format. “MP3 files” have  
“.mp3” as extensions.  
DVD video (pages 9, 25)  
A disc format that contains up to eight hours of  
moving pictures on a disc the same diameter as  
a CD. A single-layer single sided DVD holds up to  
4.7 GB; a double layer single-sided DVD, 8.5 GB; a  
single layer double-sided DVD, 9.4 GB; double-layer  
double-sided DVD, 17 GB. The MPEG 2 format was  
adopted for efficient video data compression. It is  
a variable rate technology that encodes the data to  
according to the status of the video for reproducing  
high-quality images. Audio information is recorded  
in a multi-channel format such as Dolby Digital,  
allowing for a realistic audio presence.  
MPEG-2  
MPEG-2 (Moving Picture Experts Group phase 2) is  
one of the video data compression schemes, which  
is adopted for DVD videos and digital broadcasts  
worldwide. Some Blu-ray Discs also use high bitrate  
MPEG-2.  
Infrastructure mode (page 19)  
Infrastructure mode is a wireless LAN  
communication format. This performs wireless  
communication through an access point.  
Multi Angle (pages 37–39)  
This is a feature of DVD and BD video discs. In  
some discs, the same scene is shot from different  
angles, and these are stored in a single disc so you  
can enjoy playback from each angle. (This function  
can be enjoyed if the disc is recorded with multiple  
angles.)  
Interlace format  
Interlace format shows every other line of an image  
as a single “field” and is the standard method for  
displaying images on television. The even numbered  
field shows the even numbered lines of an image,  
and the odd numbered field shows the odd  
numbered lines of an image.  
DVD+/-R (pages 9, 25)  
A DVD+/-R is a recordable, write-once DVD.  
Since contents can be recorded and cannot be  
overwritten, a DVD+/-R can be used to archive data  
or for storing and distributing video material. The  
DVD+/-R has two different formats: VR format and  
Video format. DVDs created in Video format have  
the same format as a DVD video, while discs created  
in VR (Video Recording) format allow the contents to  
be programed or edited.  
Multi Audio  
This is a feature of DVD and BD video discs. This  
function makes it possible to record different audio  
tracks for the same video, so you can enhance your  
enjoyment by switching the audio. (You can enjoy  
this function with discs recorded with multiple audio  
tracks.)  
JPEG (pages 9–11, 33, 34)  
JPEG (Joint Photographic Experts Group) is a still  
image data compression format and is used in most  
of digital cameras.  
Letter Box (LB 4:3) (page 41)  
A screen size with black bars on the top and bottom  
of the image to allow viewing of wide-screen (16:9)  
material on a connected 4:3 TV.  
Netflix (page 55)  
Netflix is an online DVD and Blu-ray Disc rental  
service, offering rental-by mail and streaming  
instantly to Netflix unlimited members.  
64  
Glossary  
Pan Scan (PS 4:3) (page 41)  
A screen size that cuts off the sides of the image  
to allow viewing of wide-screen (16:9) material on a  
connected 4:3 TV.  
Subtitles (pages 37–39)  
These are the lines of text appearing at the bottom  
of the screen which translate or transcribe the  
dialog. They are recorded on many DVD and BD  
video discs.  
Parental control (page 43)  
In some digital broadcasts and BD/DVD video discs,  
a control level for disc viewing is set depending on  
the age of the viewer. With this Player, you can set  
the control level for viewing such broadcasts and  
discs.  
Time number  
This indicates the play time which has elapsed from  
the start of a disc or a title. It can be used to find a  
specific scene quickly. (It may not work with some  
discs.)  
Pop-up menu (page 27)  
Title number (pages 38, 39)  
An enhanced menu operation available on BD video  
discs. The pop-up menu appears when POP-UP  
MENU is pressed during playback, and can be  
operated while playback is in progress.  
These numbers are recorded on DVD and Blu-ray  
discs. When a disc contains two or more movies,  
these movies are numbered as title 1, title 2, etc.  
Top menu (page 26)  
Progressive format  
In a BD/DVD video, this is the menu for selecting  
things like the chapter to be played back and the  
subtitle language. In some DVD videos, the top  
menu may be called the “Title Menu”.  
Compared to the Interlace format that alternately  
shows every other line of an image (field) to create  
one frame, the Progressive format shows the entire  
image at once as a single frame. This means that  
while the Interlace format can show 30 frames/60  
fields in one second, the Progressive format  
can show 60 frames in one second. The overall  
picture quality increases and still images, text, and  
horizontal lines appear sharper.  
Track number (pages 38, 39)  
These numbers are assigned to the tracks which are  
recorded on audio CDs. They enable specific tracks  
to be located quickly.  
VUDU (page 56)  
VUDU is an on-demand video service for renting or  
buying movies that can be watched instantly on TV.  
Region code (page 9)  
Code identifying a geographic region of  
compatibility for a BD/DVD.  
x.v.Color  
x.v.Color reproduces a greater range of color than  
before, showing almost all of the colors that the  
human eye can detect. (Applicable for JPEG files  
only with this system)  
Resume playback (page 25)  
If you stop playback while it is in progress, the  
Player stores the stop position in memory, and this  
function lets you playback from that point.  
YouTube (page 55)  
Skip (pages 32, 33, 35)  
YouTube is a website where users can upload and  
view video content, such as video clips and TV clips.  
You can watch the content streamed on your TV.  
This returns to the start of the chapter (or track)  
being played, or skips to the next chapter (or track).  
65  
Network Service Disclaimer  
This Sharp device facilitates the access to content and services provided by third parties. The content and services accessible via this device belong to and may  
be proprietary to third parties. Therefore, any use of such third party content and services must be in accordance with any authorization or terms of use provided by  
such content or service provider. Sharp shall not be liable to you or any third party for your failure to abide by such authorization or terms of use. Unless otherwise  
specifically authorized by the applicable content or service provider, all third party content and services provided are for personal and non-commercial use; you may  
not modify, copy, distribute, transmit, display, perform, reproduce, upload, publish, license, create derivative works from, transfer or sell in any manner or medium any  
content or services available via this device.  
Sharp is not responsible, nor liable, for customer service-related issues related to the third party content or services. Any questions, comments or service-related  
inquiries relating to the third party content or service should be made directly to the applicable content or service provider.  
You may not be able to access content or services from the device for a variety of reasons which may be unrelated to the device itself, including, but not limited to,  
power failure, other Internet connection, or failure to configure your device properly. Sharp, its directors, officers, employees, agents, contractors and affiliates shall  
not be liable to you or any third party with respect to such failures or maintenance outages, regardless of cause or whether or not it could have been avoided.  
ALL THIRD PARTY CONTENT OR SERVICES ACCESSIBLE VIA THIS DEVICE IS PROVIDED TO YOU ON AN “AS-IS” AND “AS AVAILABLE” BASIS AND SHARP AND  
ITS AFFILIATES MAKE NO WARRANTY OR REPRESENTATION OF ANY KIND TO YOU, EITHER EXPRESS OR IMPLIED, INCLUDING, WITHOUT LIMITATION, ANY  
WARRANTIES OF MERCHANTABILITY, NON-INFRINGEMENT, FITNESS FOR A PARTICULAR PURPOSE OR ANY WARRANTIES OF SUITABILITY, AVAILABILITY,  
ACCURACY, COMPLETENESS, SECURITY, TITLE, USEFULNESS, LACK OF NEGLIGENCE OR ERROR-FREE OR UNINTERRUPTED OPERATION OR USE OF THE  
CONTENT OR SERVICES PROVIDED TO YOU OR THAT THE CONTENT OR SERVICES WILL MEET YOUR REQUIREMENTS OR EXPECTATIONS.  
SHARP IS NOT AN AGENT OF AND ASSUMES NO RESPONSIBILITY FOR THE ACTS OR OMISSIONS OF THIRD PARTY CONTENT OR SERVICE PROVIDERS, NOR  
ANY ASPECT OF THE CONTENT OR SERVICE RELATED TO SUCH THIRD PARTY PROVIDERS.  
IN NO EVENT WILL SHARP AND/OR ITS AFFILIATES BE LIABLE TO YOU OR ANY THIRD PARTY FOR ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL, PUNITIVE,  
CONSEQUENTIAL OR OTHER DAMAGES, WHETHER THE THEORY OF LIABILITY IS BASED ON CONTRACT, TORT, NEGLIGENCE, BREACH OF WARRANTY,  
STRICT LIABILITY OR OTHERWISE AND WHETHER OR NOT SHARP AND/OR ITS AFFILIATES HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.  
66  
About Software License  
Information on the Software License for This Product  
Software composition  
The software included in this product is comprised of various software components whose individual copyrights are held by SHARP or by third parties.  
Software developed by SHARP and open source software  
The copyrights for the software components and various relevant documents included with this product that were developed or written by SHARP are owned  
by SHARP and are protected by the Copyright Act, international treaties, and other relevant laws. This product also makes use of freely distributed software and  
software components whose copyrights are held by third parties. These include software components covered by a GNU General Public License (hereafter GPL), a  
GNU Lesser General Public License (hereafter LGPL) or other license agreement.  
Obtaining source code  
Some of the open source software licensors require the distributor to provide the source code with the executable software components. GPL and LGPL include  
similar requirements. For information on obtaining the source code for the open source software and for obtaining the GPL, LGPL, and other license agreement  
information, visit the following website:  
We are unable to answer any questions about the source code for the open source software. The source code for the software components whose copyrights are  
held by SHARP is not distributed.  
Acknowledgements  
The following open source software components are included in this product:  
• directfb-extra • cairo • directfb • iconv • openssl • curl • freetype • jpeg • expat • mng • png • xml • zlib • kernel • net-tools  
• GNU bash • busybox • cramfs • dhcpcd • e2fsprogs • fdisk • TinyLogin • sysutils • iptables • mtd-utils • ntfs-3g • sfdisk • hotplug  
• utelnetd • procps • GNU termcap • libusb • uClibc • tcpdump • strace • hdparm • libpcap • portmap  
Software License Notice  
Software License Notice Requirements  
The software components incorporated into this product include components whose copyright holders require license notices. The license notices for these software  
components are shown below.  
OpenSSL License  
This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit. (http://www.openssl.org)  
Original SSLeay License  
This product includes cryptographic software written by Eric Young ([email protected]).  
BSD License  
This product includes software developed by the University of California, Berkeley and its contributors.  
67  
LIMITED WARRANTY  
CONSUMER LIMITED WARRANTY  
SHARP ELECTRONICS CORPORATION warrants to the first consumer purchaser that this Sharp brand product (the “Product”), when shipped in its original container, will be free  
from defective workmanship and materials, and agrees that it will, at its option, either repair the defect or replace the defective Product or part thereof with a new or remanufactured  
equivalent at no charge to the purchaser for parts or labor for the period(s) set forth below.  
This warranty does not apply to any appearance items of the Product or if the serial number or model number affixed to the Product has been removed, defaced, changed, altered or  
tampered with. This warranty does not cover installation or signal reception problems. This limited warranty will not apply if the Product has been or is being used in a commercial  
setting or application; this warranty is meant solely for the non-commercial, household use of the Product by consumers in their home or residence.  
In order to enforce the rights under this limited warranty, the purchaser should follow the steps set forth below and provide proof of purchase to the servicer.  
To the extent permitted by applicable state law, the warranties set forth are in lieu of, and exclusive of, all other warranties, express or implied. Specifically ALL OTHER WARRANTIES  
OTHER THAN THOSE SET FORTH ABOVE ARE EXCLUDED, ALL EXPRESS AND IMPLIED WARRANTIES INCLUDING THE WARRANTIES OF MERCHANTABILITY, FITNESS  
FOR USE, AND FITNESS FOR A PARTICULAR PURPOSE ARE SPECIFICALLY EXCLUDED. IF, UNDER APPLICABLE STATE LAW, IMPLIED WARRANTIES MAY NOT VALIDLY BE  
DISCLAIMED OR EXCLUDED, THE DURATION OF SUCH IMPLIED WARRANTIES IS LIMITED TO THE PERIOD(S) FROM THE DATE OF PURCHASE SET FORTH BELOW. THIS  
WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.  
The warranties given herein shall be the sole and exclusive warranties granted by Sharp and shall be the sole and exclusive remedy available to the purchaser and only for the time  
periods set forth herein. No other representations or promises made by anyone are permitted. Correction of defects, in the manner and for the period of time described herein, shall  
constitute complete fulfillment of all liabilities and responsibilities of Sharp to the purchaser with respect to the Product, and shall constitute full satisfaction of all claims, whether  
based on contract, negligence, strict liability or otherwise. Sharp does not warrant nor shall Sharp be liable, or in any way responsible, for Products which have been subject to  
abuse (including, but not limited to, improper voltage), accident, misuse, negligence, lack of reasonable care, alteration, modification, tampering, improper operation or maintenance  
or any damages or defects in the Product which were caused by repairs or attempted repairs performed by anyone other than a Sharp authorized servicer. Nor shall Sharp be liable  
or in any way responsible for any incidental or consequential economic or property damage. Some states do not allow limits on warranties or on remedies for breach in certain  
transactions; in such states, the limits herein may not apply.  
THIS LIMITED WARRANTY IS VALID ONLY IN THE FIFTY (50) UNITED STATES, THE DISTRICT OF COLUMBIA AND PUERTO RICO.  
Model Specific Section  
Your Product Model Number & Description:  
Warranty Period for this Product:  
BD-HP25U BLU-RAY DISC/DVD PLAYER  
(Be sure to have this information available when you need service for your Product.)  
One (1) year parts and labor from the date of purchase.  
Additional Item(s) Excluded from  
Warranty Coverage (if any):  
Non-rechargeable batteries.  
Where to Obtain Service:  
From a Sharp Authorized Servicer located in the United States. To find the location of the nearest Sharp Authorized Servicer,  
call Sharp toll free at 1-800-BE-SHARP.  
What to do to Obtain Service:  
Please transport the Product in its original packaging and ensure that the Product is covered to avoid scratches and  
damage. Sharp shall not be responsible for lost, stolen or misdirected mail or for damage to the product incurred during  
shipping.  
68  
VALID IN CANADA ONLY  
LIMITED WARRANTY  
Consumer Electronics Products  
Congratulations on your purchase!  
Sharp Electronics of Canada Ltd. (hereinafter called “Sharp”) gives the following express warranty to the first consumer purchaser for this Sharp brand product, when  
shipped in its original container and sold or distributed in Canada by Sharp or by an Authorized Sharp Dealer:  
Sharp warrants that this product is free, under normal use and maintenance, from any defects in material and workmanship. If any such defects should be found in  
this product within the applicable warranty period, Sharp shall, at its option, repair or replace the product as specified herein.  
This warranty shall not apply to:  
(a) Any defects caused or repairs required as a result of abusive operation, negligence, accident, improper installation or inappropriate use as outlined in the owner’s  
manual.  
(b) Any Sharp product tampered with, modified, adjusted or repaired by any party other than Sharp, Sharp’s Authorized Service Centres or Sharp’s Authorized  
Servicing Dealers.  
(c) Damage caused or repairs required as a result of the use with items not specified or approved by Sharp, including but not limited to head cleaning tapes and  
chemical cleaning agents.  
(d) Any replacement of accessories, glassware, consumable or peripheral items required through normal use of the product including but not limited to earphones,  
remote controls, AC adapters, batteries, temperature probe, stylus, trays, filters, belts, ribbons, cables and paper.  
(e) Any cosmetic damage to the surface or exterior that has been defaced or caused by normal wear and tear.  
(f) Any damage caused by external or environmental conditions, including but not limited to transmission line/power line voltage or liquid spillage.  
(g) Any product received without appropriate model, serial number and CSA/cUL markings.  
(h) Any products used for rental or commercial purposes.  
(i) Any installation, setup and/or programming charges.  
Should this Sharp product fail to operate during the warranty period, warranty service may be obtained upon delivery of the Sharp product together with proof of  
purchase and a copy of this LIMITED WARRANTY statement to an Authorized Sharp Service Centre or an Authorized Sharp Servicing Dealer. In home warranty  
service may be provided at Sharp’s discretion on any Sharp television with the screen size of 27” or larger and on any Sharp Over-the-Range Microwave Oven.  
This warranty constitutes the entire express warranty granted by Sharp and no other dealer, service centre or their agent or employee is authorized to extend, enlarge  
or transfer this warranty on behalf of Sharp. To the extent the law permits, Sharp disclaims any and all liability for direct or indirect damages or losses or for any  
incidental, special or consequential damages or loss of profits resulting from a defect in material or workmanship relating to the product, including damages for the  
loss of time or use of this Sharp product or the loss of information. The purchaser will be responsible for any removal, reinstallation, transportation and insurance  
costs incurred. Correction of defects, in the manner and period of time described herein, constitute complete fulfillment of all obligations and responsibilities of Sharp  
to the purchaser with respect to the product and shall constitute full satisfaction of all claims, whether based on contract, negligence, strict liability or otherwise.  
WARRANTY PERIODS  
Audio Product  
BD/DVD Product  
Projector  
1 year  
Microwave Open  
Air Purifier  
Portable Air Conditioner  
1 year (magnetron component-4 additional years)  
1 year  
1 year  
1 year  
1 year (lamp 90 days)  
1 year  
LCD TV  
To obtain the name and address of the nearest Authorized Sharp Service Centre or Dealer, please contact:  
SHARP ELECTRONICS OF CANADA LTD. 335 Britannia Road East, Mississauga, Ontario L4Z 1W9  
For more information on this Warranty, Sharp Extended Warranty  
Offers, Sharp Canada Products, Accessory Sales, Dealer or Service  
Locations, please call (905) 568-7140  
Visit our Web site: www.sharp.ca  
Revision 11/10/10  
69  
SHARP ELECTRONICS CORPORATION  
Sharp Plaza, Mahwah, New Jersey 07495-1163  
SHARP CORPORATION  
10P12-CH-NG  

VocoPro Car Stereo System CDG 4000 User Manual
Texas Instruments Audio Power Amplifier TPA2011D1 User Manual
Sony HDR TD20 User Manual
Sony Handycam HDR XR350V User Manual
Sony DCR HC1000E User Manual
Sony Camcorder PJ760 User Manual
Sony Camcorder CCD TR70 User Manual
Sirius Satellite Radio 8840 User Manual
Samsung DC575WI User Manual
Samsung Camcorder SCB 2000ND User Manual