Sharp AQUOS BD HP80U User Manual

BD-HP80U  
BLU-RAY DISC/DVD PLAYER  
OPERATION MANUAL  
MODE D'EMPLOI  
LECTEUR DE DISQUES BLU-RAY/DVD  
The Spanish Quick Guide is included at the end of this operation manual. (See ES-1 – ES-8.)  
Le guide rapide en espagnol est inclus à la fin de ce mode d’emploi. (Voir ES-1 – ES-8.)  
La Guía Rápida en Español se incluye al final de este manual de manejo. (Consulte ES-1 – ES-8.)  
OPERATION MANUAL  
ENGLISH  
For future reference, record the model and serial number  
(located on the rear of the product) in the space provided.  
Model No.:  
Serial No.:  
Introduction  
SAFETY INFORMATION  
This symbol warns the user of  
uninsulated voltage within the  
unit that can cause dangerous  
electric shocks.  
This symbol alerts the user  
that there are important  
operating and maintenance  
instructions in the literature  
accompanying this unit.  
• This Player is classified as a CLASS 1 LASER product.  
• The CLASS 1 LASER PRODUCT label is located on  
the bottom cabinet.  
• This product contains a low power laser device. To  
ensure continued safety do not remove any cover or  
attempt to gain access to the inside of the product.  
Refer all servicing to qualified personnel.  
1
SAFETY INFORMATION  
FCC Compliance Statement  
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:  
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including  
interference that may cause undesired operation.  
Wireless Radio  
For product available in the USA/Canada market, only channel 1–11 can be operated. Selection of other channels is not possible.  
This device is going to be operated in 2.412–2.462GHz frequency range, it is restricted in indoor environment only.  
Important: Any changes or modifications not expressly approved by the party responsible for compliance could void the users  
authority to operate the equipment.  
FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled  
environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.  
Industry Canada Statement  
This Class B digital apparatus complies with Canadian ICES-003.  
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.  
Operation is subject to the following two conditions:  
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including  
interference that may cause undesired operation of the device. This device and its antenna(s) must not be colocated or operation  
in conjunction with any other antenna or transmitter.  
Wireless Radio  
For product available in the USA/Canada market, only channel 1–11 can be operated. Selection of other channels is not possible.  
The device could automatically discontinue transmission in case of absence of information to transmit, or operational failure.  
Note that this is not intended to prohibit transmission of control or signaling information or the use of repetitive codes where  
required by the technology.  
Important: Any changes or modifications not expressly approved by the party responsible for compliance could void the users  
authority to operate the equipment.  
IC Radiation Exposure Statement: This equipment complies with IC RSS-102 radiation exposure limits set forth for an  
uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator  
& your body.  
2
DEAR SHARP CUSTOMER  
Thank you for your purchase of the SHARP Blu-ray Disc/DVD Player. To ensure safety and many years  
of trouble-free operation of your product, please read the Important Safety Instructions carefully before  
using this product.  
IMPORTANT SAFETY INSTRUCTIONS  
Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if  
improperly handled. This product has been engineered and manufactured with the highest priority on safety. However,  
improper use can result in electric shock and/or fire. In order to prevent potential danger, please observe the following  
instructions when installing, operating and cleaning the product. To ensure your safety and prolong the service life of your  
Blu-ray Disc/DVD Player, please read the following precautions carefully before using the product.  
1) Read these instructions.  
2) Keep these instructions.  
3) Heed all warnings.  
4) Follow all instructions.  
5) Do not use this apparatus near water.  
6) Clean only with dry cloth.  
7) Do not block any ventilation openings. Install in accordance with the manufacturers instructions.  
8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers)  
that produce heat.  
9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one  
wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the  
third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for  
replacement of the obsolete outlet.  
10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point  
where they exit from the apparatus.  
11) Only use attachments/accessories specified by the manufacturer.  
12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus.  
When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.  
13) Unplug this apparatus during lightning storms or when unused for long periods of time.  
14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been  
damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects  
have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate  
normally, or has been dropped.  
Additional Safety Information  
15) Power Sources—This product should be operated only from the type of power source indicated on the marking label.  
If you are not sure of the type of power supply to your home, consult your product dealer or local power company.  
For products intended to operate from battery power, or other sources, refer to the operating instructions.  
16) Overloading—Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in  
a risk of fire or electric shock.  
17) Object and Liquid Entry—Never push objects of any kind into this product through openings as they may touch  
dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on  
the product.  
18) Damage Requiring Service—Unplug this product from the wall outlet and refer servicing to qualified service personnel  
under the following conditions:  
a) When the AC cord or plug is damaged,  
b) If liquid has been spilled, or objects have fallen into the product,  
c) If the product has been exposed to rain or water,  
d) If the product does not operate normally by following the operating instructions.  
Adjust only those controls that are covered by the operating instructions as an improper adjustment of other  
controls may result in damage and will often require extensive work by a qualified technician to restore the  
product to its normal operation,  
e) If the product has been dropped or damaged in any way, and  
f) When the product exhibits a distinct change in performance - this indicates a need for service.  
19) Replacement Parts—When replacement parts are required, be sure the service technician has used replacement  
parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions  
may result in fire, electric shock, or other hazards.  
20) Safety Check—Upon completion of any service or repairs to this product, ask the service technician to perform safety  
checks to determine that the product is in proper operating condition.  
21) Wall or ceiling mounting—When mounting the product on a wall or ceiling, be sure to install the product according to  
the method recommended by the manufacturer.  
22) The main AC plug is used as disconnect device and shall always remain readily operable.  
3
IMPORTANT SAFETY INSTRUCTIONS  
• Water and Moisture—Do not use this product near water - for example, near a bath tub,  
wash bowl, kitchen sink, or laundry tub; in a wet basement; or near a swimming pool; and  
the like.  
• Stand—Do not place the product on an unstable cart, stand, tripod or table. Placing the  
product on an unstable base can cause the product to fall, resulting in serious personal  
injuries as well as damage to the product. Use only a cart, stand, tripod, bracket or  
table recommended by the manufacturer or sold with the product. When mounting the  
product on a wall, be sure to follow the manufacturers instructions. Use only the mounting  
hardware recommended by the manufacturer.  
• Selecting the location—Select a place with no direct sunlight and good ventilation.  
• Ventilation—The vents and other openings in the cabinet are designed for ventilation.  
Do not cover or block these vents and openings since insufficient ventilation can cause  
overheating and/or shorten the life of the product. Do not place the product on a bed, sofa,  
rug or other similar surface, since they can block ventilation openings. This product is not  
designed for built-in installation; do not place the product in an enclosed place such as a  
bookcase or rack, unless proper ventilation is provided or the manufacturers instructions  
are followed.  
• Heat—The product should be situated away from heat sources such as radiators, heat  
registers, stoves, or other products (including amplifiers) that produce heat.  
• Lightning—For added protection for this product during a lightning storm, or when it is left  
unattended and unused for long periods of time, unplug it from the wall outlet. This will  
prevent damage to the product due to lightning and power-line surges.  
To prevent fire, never place any type of candle or flames on the top or near the product.  
To prevent fire or shock hazard, do not expose this product to dripping or splashing.  
No objects filled with liquids, such as vases, should be placed on the product.  
To prevent fire or shock hazard, do not place the AC cord under the product or other heavy  
items.  
4
PRECAUTIONS  
Precautions on viewing stereoscopic 3D images  
• Do not view stereoscopic 3D images if you have a history of photosensitivity, heart disease or poor health. This may  
cause the symptoms to worsen.  
• If you experience any health problems such as fatigue and discomfort while viewing stereoscopic 3D images, immediately  
discontinue viewing. Continuing viewing after symptoms appear may cause health risks. Take a break until the symptoms  
have completely disappeared.  
• Ages of 5–6 or over are recommended for viewing stereoscopic 3D images. Symptoms such as fatigue and discomfort  
are difficult to determine in young children, therefore they may suddenly become ill. When viewing 3D images with  
children, please watch for eye strain symptoms.  
• When viewing stereoscopic 3D images, take a moderate break after watching one title. Viewing for extended periods may  
cause visual strain.  
Precautions when cleaning this product  
Turn off the main power and unplug the AC cord from the wall outlet before handling.  
To clean the outer cabinet, periodically wipe it with a soft cloth (cotton, flannel, etc.).  
• For severe dirt, soak a soft cloth (cotton, flannel, etc.) in some neutral detergent diluted with water, wring the cloth out  
thoroughly, wipe off the dirt, then wipe again with a soft, dry cloth.  
• Do not use chemicals or a chemically treated cloth for cleaning. It may damage the cabinet finish.  
Notes on using Wireless LAN  
• When this player is connected to a wireless LAN network, transmissions between the wireless LAN components inside  
this player and a wireless LAN compatible broadband router (commercially available) are carried out.  
Precautions on using Wireless LAN  
• The following devices, radio stations, etc. use the same frequency bands. Do not use wireless LAN near them.  
Manufacturing/scientific/diagnostic equipment such as pacemakers, etc.  
Specified low power radio stations (radio stations that do not require a license)  
If this player is used near these devices, there is a possibility that radio wave interference may occur. Therefore  
transmission may not be possible or speed may be reduced.  
• Mobile phones, radios, etc. use different radio frequency bands from wireless LAN, so there will not be any effect on the  
transmissions of these devices or wireless LAN if this player is used near them.  
However, if a wireless LAN product is placed near one of these devices, audio or video noise may occur due to the  
electromagnetic waves that emit from wireless LAN products.  
• Radio waves will pass through the wood, glass, etc. used in standard housing, however they will not pass through  
reinforcing bars, metal, concrete, etc. Radio waves will not pass through walls and floors if these materials are used.  
5
Contents  
Video/Picture/Music Playback.......................27–33  
Loading a Disc/Ejecting a Disc.................................... 27  
BD/DVD Video Playback............................................. 27  
Displaying the disc information............................... 27  
BD/DVD Menus .......................................................... 28  
Start playback by selecting a title from  
Introduction  
SAFETY INFORMATION ......................................1–2  
DEAR SHARP CUSTOMER .....................................3  
IMPORTANT SAFETY INSTRUCTIONS..............3–4  
PRECAUTIONS ........................................................5  
Contents...............................................................6–7  
What would you like to do with this Player?.........8  
the top menu....................................................... 28  
Using the disc menu.............................................. 28  
Using the pop-up menu......................................... 28  
Enjoying BONUSVIEW or BD-LIVE.............................. 29  
Use of Picture in Picture function (secondary audio/  
video playback) ................................................... 29  
Virtual Package...................................................... 29  
BD-LIVE................................................................. 29  
DVD-R/-RW (VR format) / BD-RE/-R (BDAV format)  
Playback .................................................................. 30  
Playback by selecting a title ................................... 30  
Playback by selecting a Playlist.............................. 30  
Audio CD Playback..................................................... 31  
Playback from the beginning.................................. 31  
To skip the track during playback........................... 31  
Operation procedure for the “Functions” menu ...... 31  
Audio Data (MP3 File) Playback................................... 32  
Playing back Audio data (MP3 files) ....................... 32  
To play another file during Playback ....................... 32  
To skip the file during Playback .............................. 32  
Displaying Still Images (JPEG files).............................. 33  
Displaying Still Images (JPEG files)......................... 33  
Playing back Slide Show........................................ 33  
Setting slide show speed/repeat playback ............. 33  
About Media Types............................................9–11  
Blu-ray Disc .................................................................. 9  
Types of Discs that Can Be Used with This Player......... 9  
Discs that Cannot Be Used with This Player.................. 9  
About Disc Contents................................................... 11  
BD Video ............................................................... 11  
Title, Chapter and Track......................................... 11  
Icons Used on DVD Video Disc Cases ................... 11  
The Icons Used in This Operation Manual ................... 11  
Important Information...........................................12  
Disc Precautions......................................................... 12  
License and Copyright................................................ 12  
Getting Started ......................................................13  
Major Components..........................................14–16  
Main Unit (Front).......................................................... 14  
Main Unit (Rear) .......................................................... 15  
Remote Control Unit ................................................... 16  
Player setup orientation........................................17  
Removing and replacing the terminal cover................. 17  
Remote control sensor setting ............................... 17  
Playback Functions.........................................34–36  
Fast Forward/Reverse (Search) ................................... 34  
Skipping to the Next or the Start of the Current Chapter  
(Track/Title)............................................................... 34  
Pause/Frame Advance Playback................................. 34  
Slow Playback ............................................................ 34  
Skip Search ................................................................ 34  
Replay ........................................................................ 34  
Repeat Playback of a Title or Chapter  
Connection  
Video Connection ..................................................18  
Connecting to the HDMI Terminal................................ 18  
Audio Connection..................................................19  
Connecting to the Digital Audio Terminal..................... 19  
Broadband Internet Connection ....................20–21  
Internet Connection (LAN cable).................................. 20  
Internet Connection (Wireless LAN)............................. 21  
(Repeat Playback) .................................................... 35  
Partial Repeat Playback (Repeat Playback of  
Playback  
a Specified Part)....................................................... 35  
Displaying the Audio Information................................. 36  
Switching Subtitles...................................................... 36  
Switching the Angle .................................................... 36  
Displaying the Angle Mark........................................... 36  
Before Starting Playback................................22–26  
Loading the Batteries in the Remote Control............... 22  
Approximate operating range of remote control ..... 22  
Connecting the AC adapter......................................... 23  
Turning the Power On ................................................. 23  
Turning the power on............................................. 23  
Entering standby.................................................... 23  
Indicators on the Player ......................................... 23  
Language Setting........................................................ 24  
Changing the on-screen display language.............. 24  
Operating a SHARP TV Using the Remote Control...... 24  
TV function control................................................. 24  
Turning Off the Indicator Lights.................................... 24  
Using AQUOS LINK .................................................... 25  
Controlling the Blu-ray disc player using AQUOS  
Settings During Playback ...............................37–38  
Function Control ......................................................... 37  
Function control operation procedure .................... 37  
Functions which can be set ................................... 38  
Settings  
SETTINGS.........................................................39–51  
Common operations................................................... 39  
Basic Operation for Playback Setting.......................... 39  
Audio Video Settings................................................... 40  
Smart Settings............................................................ 41  
AQUOS LINK.............................................................. 41  
Playback Setting................................................... 41–42  
On Screen Language.................................................. 42  
LINK.................................................................... 25  
Using 3D..................................................................... 25  
Control Panel.............................................................. 26  
6
Contents  
Version........................................................................ 42  
System ....................................................................... 42  
Communication Setup .......................................... 43–46  
Sets whether “Cable” or “Wireless” is used for the  
network connection............................................. 43  
When selecting Cable ...................................... 43–44  
When selecting Wireless .................................. 44–45  
The operation procedure for inputting characters  
What to do first:  
Refer to “Getting Started” (p. 13) to prepare  
for using this player.  
manually.............................................................. 46  
USB Memory Management......................................... 47  
Software Update Settings ..................................... 48–49  
Manual Update from Network................................ 48  
Manual Update from USB memory device ....... 49–50  
Digital Audio Output Selection Formats....................... 51  
Introduction (pp. 1–17)  
Explains the important operation information.  
Streaming content  
Playing back streaming content ....................52–56  
Instantly Watching Movies from Netflix .................. 52–53  
Enjoying Movies and Internet Application with  
VUDU................................................................. 54–55  
Enjoying Pandora radio............................................... 56  
Connection (pp. 18–21)  
Shows the connecting options provided by  
this Player.  
Appendix  
Troubleshooting...................................................i–iii  
To Reset this Player....................................................... iii  
On-screen Error Messages ...................................iv  
Specifications .....................................................v–vi  
Glossary ............................................................ vii–ix  
Network Service Disclaimer...................................x  
About Software License.........................................xi  
LIMITED WARRANTY..................................... xii–xiii  
Playback (pp. 22–38)  
Shows simple playback and useful functions.  
Settings (pp. 39–51)  
Gives you more options to suit your  
circumstances.  
Streaming content (pp. 52–56)  
Shows the Internet streaming services  
available with this player.  
Appendix (pp. i–xiii)  
Provides troubleshooting tips and more  
information.  
The illustrations and on-screen displays in  
this operation manual are for explanation  
purposes and may vary slightly from the actual  
operations.  
7
What would you like to do with this Player?  
Watch high quality movies on Blu-ray  
Enjoy BD-LIVE functions through the  
discs  
Internet  
This Player offers full high-definition Blu-ray disc  
playback.  
This Player is compatible with BD-LIVE. You can  
enjoy bonus content such as movie trailers through  
the Internet when playing back BD-Video discs  
compatible with BD-LIVE.  
Video/Picture/Music Playback (p. 27)  
Enjoying BONUSVIEW or BD-LIVE  
(p. 29)  
Enjoy stereoscopic and powerful 3D  
images  
This player can play 3D content from 3D  
compatible Blu-ray discs through an HDMI cable.  
To watch 3D images, connect a 3D compatible TV  
to this player using an HDMI cable and play the 3D  
content while wearing 3D glasses.  
Enjoy Internet streaming content on  
your TV  
This player supports streaming services using the  
Internet. By connecting this player to the Internet,  
you can enjoy various content streamed on your TV.  
Using 3D (p. 25)  
Playing back streaming content  
(pp. 52–56)  
Enjoy different kinds of media  
sources  
Use this player to enjoy video, picture or music  
content from various types of media sources  
such as DVDs, USB memory devices and via the  
Internet.  
About Media Types (pp. 9–11)  
Video/Picture/Music Playback (p. 27)  
Simple connection and operation  
through HDMI  
This Player is equipped with an HDMI terminal. You  
can connect it to the TV using HDMI and no other  
cable will be needed to enjoy movies. If your TV  
is compatible with AQUOS LINK, you can control  
both the TV and this Player with simple operations.  
Video Connection (p. 18)  
8
About Media Types  
• BD/DVD video players and discs have region codes, which  
dictate the regions in which a disc can be played. This  
Player's region code is A for BD and 1 for DVD. (Discs  
marked ALL will play in any player.)  
• BD/DVD video operations and functions may be different  
from the explanations in this manual and some operations  
may be prohibited due to disc manufacturer's settings.  
• If a menu screen or operating instructions are displayed  
during playback of a disc, follow the operating procedure  
displayed.  
Blu-ray Disc  
Blu-ray Disc is the ultimate next generation optical  
media format, offering the following key features:  
• Largest capacity (25 GB single layer – 50 GB dual layer)  
– with over 5 times the amount of content possible with  
current DVDs, particularly well suited for high definition  
feature films with extended levels of interactive features  
• Pristine picture quality with the capability for full high  
definition 1920 x 1080p resolution  
• Best audio possible with uncompressed surround sound  
(higher quality than even theater audio)  
• Broadest industry support – ensuring more choice for  
consumers in the marketplace  
• Hardware products will be backward compatible with  
DVDs, allowing continued enjoyment of existing DVD  
libraries.  
• Disc Durability – new breakthroughs in hard coating  
technologies gives Blu-ray Discs the strongest resistance  
to scratches and finger prints.  
• The audio component of a DVD video recorded at 96  
kHz (Linear PCM) will be output as 48 kHz audio during  
playback.  
NOTE  
• Playback for some of the discs in the left side column  
tables may not be possible depending on the disc.  
• “Finalize” refers to a recorder processing a recorded disc  
so that it will play in other DVD players/recorders as well  
as this player. Only finalized DVD discs will play back in  
this player. (This player does not have a function to finalize  
discs.)  
• Some discs cannot be played back depending on the  
recording format.  
Types of Discs that Can Be Used  
with This Player  
• The following discs can be played back in this Player. Do  
not use an 8 cm (3”) to 12 cm (5”) adapter.  
• Use discs that conform to compatible standards as  
indicated by the presence of official logos on the disc label.  
Playback of discs not complying with these standards is not  
guaranteed. In addition, the image quality or sound quality  
is not guaranteed even if the discs can be played back.  
Discs that Cannot Be Used with  
This Player  
The following discs cannot be played back or will  
not play back properly on this Player. If such a  
disc is mistakenly played back, speaker damage  
may occur. Never attempt to play back these  
discs.  
Recording  
Format  
Disc  
Size  
Disc Type  
Contents  
CDG, Video CD, Photo CD, CD-ROM, CD-TEXT, SVCD,  
SACD, PD, CDV, CVD, DVD-RAM, DVD-Audio, BD-RE  
with the cartridge, CD-WMA  
BD  
Video  
Region code  
A/ALL  
Audio  
+ Video  
(Movie)  
12 cm  
(5”)  
Discs with unusual shapes cannot be played.  
• Discs with unusual shapes (heart-shaped or hexagonal  
discs, etc.) cannot be used. The use of such discs will  
cause malfunction.  
BD-RE DL  
BD-R DL  
BDMV/BDAV  
format  
DVD  
Video  
Region code  
1/ALL  
Video format  
Audio  
+ Video  
(Movie)  
12 cm  
(5”)  
8 cm  
(3”)  
The following BD video discs cannot be played.  
• Discs not displaying “A” or “ALL” for the region code (discs  
sold outside the authorized marketing area).*  
• Discs produced illegally.  
ALL  
1
• Discs recorded for commercial use.  
DVD+RW/DVD+R  
DVD-RW/DVD-R  
DVD+R DL/DVD-R DL  
Video/VR/  
AVCHD format  
(finalized disc  
only)  
Audio  
+ Video  
(Movie)  
*
The region code for this product is A.  
The following DVD video discs cannot be played.  
• Discs not displaying “1” or “ALL” for the region code (discs  
sold outside the authorized marketing area).*  
• Discs produced illegally.  
12 cm  
(5”)  
8 cm  
(3”)  
DivX  
JPEG*2  
Still image  
(JPEG file)  
• Discs recorded for commercial use.  
*
The region code for this product is 1.  
MP3*3  
Audio  
Audio  
The following BD-RE/R, DVD-RW/R and  
DVD+RW/R discs cannot be played.  
• Discs on which data has not been recorded cannot be  
played back.  
The following Audio CD*1 discs cannot be played.  
• Discs containing a signal for the purpose of protecting  
copyrights (copy control signal) may not be played back  
with this Player.  
Audio CD*1  
Audio CD  
(CD-DA)  
CD-RW/CD-R  
Audio CD  
(CD-DA)  
Audio  
12 cm  
(5”)  
8 cm  
(3”)  
JPEG*2  
Still image  
(JPEG file)  
MP3*3  
DivX  
Audio  
• This Player has been designed on the premise of playing  
back Audio CDs that comply with CD (Compact Disc)  
standards.  
Audio  
+ Video  
(Movie)  
(Continued on the next page)  
9
About Media Types  
The following CD-RW/R discs cannot be played.  
• Discs on which data has not been recorded cannot be  
played back.  
• Discs recorded in a format other than an Audio CD and  
JPEG/MP3 file format cannot be played back.  
• Discs may not be played back depending on their  
recording status or the status of the disc itself.  
• Discs may not be played back depending on their  
compatibility with this Player.  
About files/folders for Still images  
(JPEG files) and audio data (MP3 files)  
You can play still images (JPEG files) /audio data (MP3 files)  
with this unit by making folder(s) on discs or USB memory  
devices as shown below.  
Example of a folder structure:  
Root  
4
001.jpg/001.mp3  
*
*2 About the JPEG file format  
JPEG is a type of file format for storing still-image files  
(photos, illustrations, etc.). The Player lets you play JPEG  
format still-image files.  
xxx.jpg/xxx.mp3  
4
*
001.jpg/001.mp3  
01 Folder  
Folder  
File formats that are not compatible.  
• Still images in formats other than JPEG (such as TIFF)  
cannot be played.  
• There may be some files that cannot be played even if they  
are in JPEG format.  
• Progressive JPEG files cannot be played.  
• Moving image files as well as Motion JPEG format files  
cannot be played, even though they are JPEG files.  
256.jpg/256.mp3  
001.jpg/001.mp3  
255.jpg/255.mp3  
4
4
*
001.jpg/001.mp3  
256.jpg/256.mp3  
xxx Folder  
*
Other files that cannot be played back.  
You may not be able to play some still images which you  
have created, touched up, copied or otherwise edited on  
your computer.  
You may not be able to play some still images you have  
processed (rotated or saved by overwriting other images  
you have imported from the Internet or e-mail).  
4 Including the root directory, the maximum number of  
folders and files in each folder is limited to 256 in total.  
*
File and folder requirements  
The discs or USB memory devices which this player can  
play back (recognize) are limited to the following properties:  
Contains EXIF format files (only JPEG files)  
Picture resolution: Between 32 x 32 and 6528 x 3672  
pixels (only JPEG files)  
Maximum number of folders and files in each folder: 256  
Maximum hierarchy level of folders: 5  
You may experience one or more of the following  
symptoms when playing files.  
• It may take some time to play files depending on the  
number of folders, number of files and volume of data  
involved.  
• EXIF information will not be displayed. EXIF stands for  
Exchangeable Image File Format, and is a standard for  
storing interchange information in image files, especially  
more information.)  
File size: 8 MB or less (JPEG files)  
200 MB or less (MP3 files)  
NOTE  
• File and folder names displayed on this player may differ  
from those displayed on PCs.  
*3 About the MP3 file format  
MP3 files are audio data compressed in the MPEG1/2 Audio  
layer-3 file format. “MP3 files” have “.mp3” as extensions.  
(Some files that have “.mp3” extensions or files that have not  
been recorded in MP3 format will produce noise or cannot be  
played.)  
About DivX VIDEO  
DivX® is a digital video format created by DivX, Inc. This is an  
official DivX Certified device that plays DivX video. Visit www.  
divx.com for more information and software tools to convert  
your files into DivX video.  
Playing the MP3 file format  
About DivX VIDEO-ON-DEMAND  
• The MP3 files are not played in the order they were  
recorded.  
This DivX Certified® device must be registered in order to  
play DivX Video-on-Demand (VOD) content. To generate the  
registration code, locate the DivX VOD section in the device  
setup menu. Go to vod.divx.com with this code to complete  
the registration process and learn more about DivX VOD.  
• It is recommended to record data at a lower speed as data  
recorded at a fast speed can produce noise and may not  
be able to be played.  
• The more folders there are, the longer the reading time.  
• Depending on the folder tree, reading MP3 files can take  
time.  
• The playing time may not be correctly displayed during  
MP3 file playback.  
The following files cannot be played on this  
player.  
• When both Audio CD [CD-DA] format and JPEG/MP3 file  
formats are recorded on a disc. (The disc is recognized to  
be an Audio CD [CD-DA] only tracks in Audio CD [CD-DA]  
format are played back.)  
• Multi-session discs cannot be played.  
10  
About Media Types  
DTS  
DTS is a digital sound system developed by DTS, Inc. for  
use in cinemas.  
About Disc Contents  
BD Video  
Enjoy BD-specific functions including BONUSVIEW (BD-ROM  
Profile 1 Version 1.1), such as picture-in-picture, and BD-LIVE  
(page 29).  
For the BD video discs compatible with BONUSVIEW/BD-  
LIVE, you can enjoy additional contents by copying the data  
from the discs or downloading it via the Internet. For instance,  
this function is capable of playing the original movie as the  
primary video while playing video commentary from the film  
director on a small screen as a secondary video.  
Linear PCM  
Linear PCM is a signal recording format used for Audio  
CDs and on some DVD and Blu-ray discs. The sound  
on Audio CDs is recorded at 44.1 kHz with 16 bits.  
(Sound is recorded between 48 kHz with 16 bits and 96  
kHz with 24 bits on DVD video discs and between 48  
kHz with 16 bits and 192 kHz with 24 bits on BD video  
discs.)  
2
3
4
Subtitle languages  
This indicates the kind of subtitles.  
Screen aspect ratio  
Movies are shot in a variety of screen modes.  
NOTE  
• The available functions differ depending on the disc.  
Camera angle  
Recorded onto some BD/DVD discs are scenes which  
have been simultaneously shot from a number of  
different angles (the same scene is shot from the front,  
from the left side, from the right side, etc.).  
Title, Chapter and Track  
• Blu-ray discs and DVDs are divided into “Titles” and  
“Chapters”. If the disc has more than one movie on it, each  
movie would be a separate “Title”. “Chapters”, on the other  
hand, are subdivisions of titles. (See Example 1.)  
5
Region code  
This indicates the region code (playable region code).  
• Audio CDs are divided into “Tracks”. You can think of a  
Track” as one tune on an Audio CD. (See Example 2.)  
The Icons Used in This Operation  
Manual  
Example 1: Blu-ray disc or DVD  
BD VIDEO ...........Indicates the functions that can be performed  
for BD Video discs.  
...........Indicates the functions that can be performed  
for BD-RE discs.  
...........Indicates the functions that can be performed  
for BD-R discs.  
.......Indicates the functions that can be performed  
for DVD Video discs.  
BD-RE  
BD-R  
Title 1  
Title 2  
Chapter 1 Chapter 2 Chapter 3 Chapter 1  
Example 2: Audio CD  
DVD VIDEO  
DVD-RW ...........Indicates the functions that can be performed  
for DVD-RW discs.  
............Indicates the functions that can be performed  
DVD-R  
for DVD-R discs.  
...........Indicates the functions that can be performed  
for Audio CDs.  
...........Indicates the functions that can be performed  
for CD-R discs.  
Track 1  
Track 2  
Track 3  
Track 4  
AUDIO CD  
CD-R  
Icons Used on DVD Video Disc Cases  
CD-RW  
USB  
...........Indicates the functions that can be performed  
for CD-RW discs.  
...........Indicates the functions that can be performed  
for USB memory devices.  
The back of the case of a DVD that is commercially  
available usually contains various information about the  
contents of the disc.  
1
2
1. English  
2. Chinese  
1. English  
2. Chinese  
2
2
3
4
5
1 23  
4 56  
16:9 LB  
2
1
Audio tracks and audio formats  
DVD discs can contain up to 8 separate tracks with  
a different language on each. The first in the list is the  
original track.  
This section also details the audio format of each  
soundtrack — Dolby Digital, DTS, MPEG etc.  
Dolby Digital  
A sound system developed by Dolby Laboratories Inc.  
that gives movie theater ambience to audio output when  
the Player is connected to a Dolby Digital processor or  
amplifier.  
11  
Important Information  
Disc Precautions  
License and Copyright  
Audio-visual material may consist of copyrighted works which  
must not be recorded without the authority of the owner of  
the copyright. Refer to relevant laws in your country.  
Be Careful of Scratches and Dust  
• BD, DVD and CD discs are sensitive to dust, fingerprints  
and especially scratches. A scratched disc may not be able  
to be played back. Handle discs with care and store them  
in a safe place.  
• “This item incorporates copy protection technology that is  
protected by U.S. patents and other intellectual property  
rights of Rovi Corporation. Reverse engineering and  
disassembly are prohibited.”  
Proper Disc Storage  
Place the disc in the center of the  
disc case and store the case and  
disc upright.  
• Manufactured under license from Dolby Laboratories.  
“Dolby” and the double-D symbol are trademarks of Dolby  
Laboratories.  
• Manufactured under license under U.S. Patent #s:  
5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,226,616;  
6,487,535; 7,392,195; 7,272,567; 7,333,929; 7,212,872 &  
other U.S. and worldwide patents issued & pending. DTS  
and the Symbol are registered trademarks, & DTS-HD,  
DTS-HD Master Audio | Essential and the DTS logos are  
trademarks of DTS, Inc. Product includes software. ©DTS,  
Inc. All Rights Reserved.  
Avoid storing discs in locations  
subject to direct sunlight, close to  
heating appliances or in locations  
of high humidity.  
Do not drop discs or subject them  
to strong vibrations or impacts.  
is a trademark.  
• “BD-LIVE” logo is a trademark of Blu-ray Disc Association.  
is a trademark of DVD Format/Logo Licensing  
Corporation.  
Avoid storing discs in locations  
where there are large amounts of  
dust or moisture.  
• HDMI, the HDMI logo and High-Definition Multimedia  
Interface are trademarks or registered trademarks of HDMI  
Licensing LLC.  
• “x.v.Color” and “x.v.Color” logo are trademarks of Sony  
Corporation.  
• Java and all Java-based trademarks and logos are  
trademarks or registered trademarks of Sun Microsystems,  
Inc. in the United States and/or other countries.  
• “BONUSVIEW” logo is a trademark of Blu-ray Disc  
Association.  
Handling Precautions  
• If the surface is soiled, wipe gently with a soft, damp (water  
only) cloth. When wiping discs, always move the cloth from  
the center hole toward the outer edge.  
• “AVCHD” and the “AVCHD” logo are trademarks of  
Panasonic Corporation and Sony Corporation.  
• “Blu-ray 3D” and “Blu-ray 3D” logo are trademarks of Blu-  
ray Disc Association.  
• Netflix and the Netflix logo are the registered trademarks of  
Netflix, Inc.  
• VUDU™ is a trademark of VUDU, Inc.  
• DivX®, DivX Certified® and associated logos are registered  
trademarks of DivX, Inc. and are used under license.  
• Do not use record cleaning sprays, benzene, thinner, static  
electricity prevention liquids or any other solvent.  
• Do not touch the surface.  
• Do not stick paper or adhesive labels to the disc.  
• If the playing surface of a disc is soiled or scratched, the  
Player may decide that the disc is incompatible and eject  
the disc, or it may fail to play the disc correctly. Wipe any  
dirt off the playing surface with a soft cloth.  
Cleaning the Pick Up Lens  
• Never use commercially available cleaning discs. The use  
of these discs can damage the lens.  
• Request the nearest service center approved by SHARP to  
clean the lens.  
Warnings about dew formation  
• Condensation may form on pick up lens or disc in the  
following conditions:  
− Immediately after a heater has been turned on.  
− In a steamy or very humid room.  
ENERGY STAR® Program Information  
− When the Player is suddenly moved from a cold  
environment to a warm one.  
Products that have earned  
the ENERGY STAR® are  
designed to protect the  
environment through  
When condensation forms:  
• It becomes difficult for the Player to read the signals  
on the disc and prevents the Player from operating  
properly.  
superior energy efficiency.  
To remove condensation:  
Take out the disc and leave the Player with the power  
off until the condensation disappears. Using the Player  
when there is condensation may cause malfunction.  
ENERGY STAR® is a U.S. registered mark.  
12  
Getting Started  
Step 1: Unpacking  
Make sure the following accessories are provided with the product.  
Remote control unit  
AC cord  
“AAA” size battery (g2)  
Page 22  
Page 23  
AC adapter  
Page 15 and 22  
Page 23  
WARNING: The AC adapter and AC cord supplied with this player must not be used with other equipment.  
Step 2: Selecting equipment to connect  
Connection varies with the equipment used. Refer to Connection (Pages 18–21).  
Turn off the devices before connecting.  
Enjoying BD-LIVE and streaming services  
To enjoy BD-LIVE content or streaming content on your TV, after an Internet connection is made, communication setup is  
required. Refer to “Communication Setup” (Pages 43–46).  
Step 3: Playing back video/picture/music content  
Play back video, picture or music content from the desired media source such as Blu-ray and DVD discs, or  
via the Internet. Refer to Playback (Pages 22–38) and streaming content (Pages 52–56).  
Step 4: Adjust settings to suit your preference  
Adjust settings to enjoy various features and other functions for playing discs/content.  
Refer to Settings (Pages 39–51).  
13  
Major Components  
Main Unit (Front)  
1
2
6
3
4
5
7
NOTE  
*
When you insert or remove a USB memory  
device, be sure to turn the main power off.  
8
9
10  
1
2
3
4
Remote control sensor “Top” (p. 17)  
BD/DVD/CD mode indicator (p. 23)  
Disc slot (p. 27)  
5
6
7
POWER (ON/STANDBY) indicator  
(p. 23)  
8
9
USB terminal (p. 32)  
POWER (p. 23)  
AQUOS PURE MODE indicator  
(pp. 23, 25)  
10 Remote control sensor “Front”  
(p. 17)  
EJECT (p. 27)  
3D indicator (pp. 23, 25)  
14  
Major Components  
Main Unit (Rear)  
1
2
8
3
Model label  
4
5
6
7
1
Cooling fan  
The cooling fan operates while the  
power to the Player is on.  
5
6
7
8
OPTICAL DIGITAL AUDIO OUT terminal (p. 20)  
HDMI OUT terminal (p. 19)  
ETHERNET terminal (p. 21)  
2
3
Terminal cover (p. 17)  
Screw holes for VESA 75 Mount  
Screw size: M4 (Maximum length = Mount plate thickness + 6 mm)  
Recommended tightening torque for M4 screws: 1.2 0.1N·m (12.2 1kgf·cm)  
Selector switch for Remote control  
sensor (p. 18)  
4
DC IN terminal (p. 23)  
NOTE  
• Some optical and/or HDMI cables may not fit in the compartment.  
15  
Major Components  
Remote Control Unit  
1
2
3
4
5
6
7
POWER (p. 23)  
m EJECT (p. 27)  
TOP MENU/TITLE LIST (pp. 28, 30)  
DISPLAY (pp. 27, 35)  
1
2
16  
Cursor buttons (a/b/c/d), ENTER (pp. 24, 39)  
EXIT (p. 39)  
A (Red), B (Green), C (Blue), D (Yellow)  
(pp. 30, 31, 33, 46)  
17  
18  
8
9
AUDIO (p. 36), SUBTITLE (p. 36), ANGLE (p. 36)  
PinP (p. 29)  
3
4
10 REPEAT (p. 35), OFF (for REPEAT) (p. 35)  
11 S REV (p. 34)  
19  
12 T SKIP (pp. 30, 34)  
13 REPLAY (p. 34)  
5
6
7
8
9
10  
11  
20  
14  
(Lock) (See below.)  
15 LIGHT (p. 24)  
16 TV CONTROL buttons (p. 24)  
17 HOME (pp. 24, 39)  
18 POP-UP MENU (p. 28)  
19 FUNCTION (p. 37)  
21  
22  
23  
24  
25  
26  
20 n RETURN (pp. 31, 35)  
21 PAGE r/s (p. 30)  
22 d PLAY (p. 27)  
12  
13  
23 V FWD (p. 34)  
24 F PAUSE (pp. 32, 34)  
25 U SKIP/l (pp. 30, 34)  
26 SKIP SEARCH (p. 34)  
27 H STOP (p. 27)  
27  
28  
29  
14  
15  
28 3D (p. 25)  
29 VIDEO OUTPUT RESET (p. 40)  
30 Number buttons (p. 38)  
31 ENTER (p. 38)  
This button is the same operation as 5 ENTER.  
Buttons under the cover  
32 CLEAR (p. 38)  
To clear the input number.  
31  
32  
33 VUDU (p. 54)  
34 Non-functional buttons  
30  
They have no operation at all.  
These buttons on the remote control are non-functional.  
Keylock function  
You can set the keylock to prevent accidental operations.  
This function allows TVs compatible with AQUOS LINK to  
also perform a Key Lock on the player.  
33  
34  
Press and hold  
(Lock) for more than 2 seconds.  
• Each time you perform this operation, the function is  
activated or deactivated.  
In such cases, the BD/DVD/CD mode indicator blinks.  
• When operating the player in a status where the keylock  
functions is set, the BD/DVD/CD mode indicator will  
blink for approximately 2 seconds.  
NOTE  
BD/DVD/CD mode indicator  
• This remote control unit is equipped with two ENTER  
buttons (5 and 31 listed above). The ENTER button under  
the cover is useful when using with the number buttons.  
16  
Player setup orientation  
Removing and replacing the  
terminal cover  
Securing bracket for the HDMI cable  
The terminal cover has a securing bracket to prevent  
breakage of the HDMI cable. When the HDMI cable is  
not passed straight through the securing bracket, the  
terminal cover cannot be closed.  
Before connecting the player to a TV, the AC adapter,  
etc., remove the terminal cover on the bottom of the  
player.  
b Back of the terminal cover  
1
Remove the terminal cover on the bottom of the  
player.  
b Bottom side of the player  
Securing bracket for the HDMI cable  
Remote control sensor setting  
You can select the remote control sensor from “Front”  
or “Top” depending on the orientation of the player and  
the usage situation. In most cases, the selector switch  
should be set to “Front”.  
2
3
Make the necessary connections to the player  
(pages 18–21, 23).  
Replace the terminal cover.  
• Pass the cables through the center of the terminal  
cover.  
Remote control sensor “Top”  
b Bottom side of the player  
Remote control sensor “Front”  
Pass the cables through here.  
• Replace the terminal cover so the cables pass through  
the center of the cover.  
b Bottom side of the player  
FRONT  
Selector switch for  
TOP  
Remote control sensor  
Installation example  
17  
Connection  
Video Connection  
Connecting to the HDMI Terminal  
You can enjoy high quality digital picture and sound through the HDMI terminal.  
• When you use AQUOS LINK, make sure to use a certified HDMI cable.  
• For details on digital audio output formats (PCM/bitstream), refer to the digital audio output format selection  
table on page 51.  
STEPS  
1
2
Be sure to turn off this Player and the equipment before making any connections.  
Firmly connect an HDMI cable (commercially available) to the HDMI terminals (1 and 2).  
This Player  
NOTE  
• Audio transmitted in DTS-HD High  
Resolution Audio and DTS-HD Master  
Audio formats is output from the  
HDMI terminal as Bitstream. Connect  
an amplifier with a built-in decoder to  
enjoy the fine sound quality.  
To HDMI OUT  
terminal  
1
2
• When using an HDMI output, 7.1 ch  
Digital Output is available.  
HDMI cable  
(commercially available)  
To HDMI IN  
terminal  
Projector  
AV receiver  
TV  
Equipment with an HDMI terminal  
After connecting  
• If desired, connect audio equipment. (Page 19)  
• If necessary, perform the Audio Video Settings. (Page 40)  
• Refer to AQUOS LINK function. (Pages 25 and 41)  
• Prepare the desired disc or content and start playback. (Pages 27–33)  
18  
Audio Connection  
Connecting to the Digital Audio Terminal  
You can connect audio equipment or the TV to the OPTICAL DIGITAL AUDIO OUT terminal.  
• For details on digital audio output formats (PCM/bitstream), refer to the digital audio output format selection  
table on page 51.  
STEPS  
1
2
Be sure to turn off this Player and the equipment before making any connections.  
Firmly connect an optical digital cable (commercially available) to the optical digital audio terminals (1 and 2).  
This Player  
• When using OPTICAL DIGITAL AUDIO OUT,  
5.1 ch Digital Output is available.  
7.1 ch Digital Output is not available.  
NOTE:  
7.1 ch Audio is available via the HDMI terminal.  
To OPTICAL DIGITAL  
AUDIO OUT terminal  
1
NOTE  
• Digital audio cannot be copied from the  
OPTICAL DIGITAL AUDIO OUT terminal.  
Optical digital cable  
(commercially available)  
To OPTICAL DIGITAL  
AUDIO IN terminal  
2
TV  
Amplifier  
Audio equipment with a digital audio input terminal  
After connecting  
• If necessary, perform the Audio Video Settings. (Page 40)  
• Prepare the desired disc or content and start playback. (Pages 27–33)  
19  
Broadband Internet Connection  
Internet Connection (LAN cable)  
• By connecting this player to the Internet, you can enjoy a variety of content on your TV using BD-LIVE functions,  
video streaming services and also perform software updates.  
• When using the Internet, a broadband Internet connection as shown below is required.  
STEPS  
1
2
Be sure to turn off this Player and the equipment before making any connections.  
Firmly connect a LAN cable (commercially available) to the ETHERNET terminal (1 and 2).  
This Player  
• When an Internet connection is made,  
wired and wireless connections cannot  
be used at the same time. Use only one  
of the connection types (See page 43).  
To ETHERNET  
terminal  
CAUTION  
1
• When using a broadband Internet connection, a contract  
with an Internet service provider is required. For more  
details, contact your nearest Internet service provider.  
• Refer to the operation manual of the equipment you have  
as the connected equipment and connection method may  
differ depending on your Internet environment.  
LAN cable  
(commercially available)  
NOTE  
• Use a LAN cable/router supporting 10BASE-T/100BASE-  
TX.  
To LAN terminal  
2
• SHARP cannot guarantee that all brands’ hubs will operate  
with this player.  
LAN  
Internet  
Modem  
Hub or broadband router  
PC  
Example of a Broadband Internet Connection  
After connecting  
• Perform the communication settings. (Pages 43–46)  
• When enjoying content on your TV using BD-LIVE functions and video streaming services, refer to BD-LIVE  
(pages 29 and 42) or video streaming services (pages 52–56).  
To update the software via the Internet, perform Software Update Settings. (Page 48)  
20  
Broadband Internet Connection  
Internet Connection (Wireless LAN)  
• By connecting this player to the Internet, you can enjoy a variety of content on your TV using BD-LIVE functions,  
video streaming services and also perform software updates.  
You can connect to a network using a wireless router/access point.  
STEPS  
1
Be sure to turn off this Player and the equipment before making any connections.  
This Player  
• When an Internet connection is made, wired and  
wireless connections cannot be used at the same time.  
Use only one of the connection types (See page 43).  
• This player is equipped with an IEEE 802.11n internal  
wireless unit, which also supports the 802.11b/g  
standards.  
CAUTION  
• When using a broadband Internet connection, a contract  
with an Internet service provider is required. For more  
details, contact your nearest Internet service provider.  
• Refer to the operation manual of the equipment you have  
as the connected equipment and connection method may  
differ depending on your Internet environment.  
PC  
NOTE  
Wireless router/  
access point  
You must use a wireless router/access point that supports  
IEEE802.11 b/g/n. (n is recommended for stable operation  
of the wireless network.)  
• Wireless LAN, in its nature, may cause interference,  
depending on the usage conditions (access point  
performance, distance, obstacles, interference by other  
radio devices, etc.).  
• Set the wireless router/access point to Infrastructure mode.  
Ad-hoc mode is not supported.  
Modem  
Internet  
Example of  
a Broadband Internet Connection  
• SHARP cannot guarantee that all brands’ wireless routers  
will operate with this player.  
After connecting  
• Perform the communication settings. (Pages 43–46)  
• When enjoying content on your TV using BD-LIVE functions and video streaming services, refer to BD-LIVE  
(pages 29 and 42) or video streaming services (pages 52–56).  
To update the software via the Internet, perform Software Update Settings. (Page 48)  
21  
Playback  
Before Starting Playback  
Loading the Batteries in the  
Remote Control  
Approximate operating range of  
remote control  
You can select the remote control sensor from “Front”  
or “Top” depending on the orientation of the player and  
the usage situation. In most cases, the selector switch  
should be set to “Front”. See page 17 to switch the  
remote control sensor.  
1
Hold in the tab on the battery cover and pull the  
cover towards the direction of the arrow.  
Remote control sensor  
2
Load the two “AAA” size batteries (R-03 size,  
UM/SUM-4). Place batteries with their terminals  
corresponding to the m and n indications in  
battery compartment.  
30º  
30º  
Approx. 22 feet (7 m)  
c Remote control unit  
3
Insert the smaller tab of the battery cover into  
the opening 1, and press down on the cover  
until it clicks in place 2.  
NOTE  
• Do not subject the remote control unit to shock, water or  
excessive humidity.  
• The remote control unit may not function if the Player's  
remote sensor is in direct sunlight or any other strong light.  
• Incorrect use of batteries may cause them to leak or burst.  
Read the battery warnings and use the batteries properly.  
• Do not mix old and new batteries, or mix different brands.  
• Remove the batteries if you will not use the remote control  
unit for an extended period of time.  
WARNING  
• Do not use or store batteries in direct sunlight or other  
excessively hot place, such as inside a car or near a heater.  
This can cause batteries to leak, overheat, explode or  
catch fire.  
It can also reduce the life or performance of batteries.  
22  
Before Starting Playback  
Connecting the AC adapter  
Turning the power on  
Press POWER on the remote control or on the Player  
to turn on the power of the Player.  
• The POWER indicator lights green.  
1 Plug the AC adapter cord in to the DC IN  
terminal on the rear of the Player.  
2 Plug the supplied AC cord into the AC adapter.  
NOTE  
3 Then, plug into an AC outlet.  
• When you turn on this player for the first time after  
purchase or when you turn on this player after you perform  
“System Reset” (see page 42), the language setting screen  
will be displayed, so please perform the language setting  
(see step 4 of page 24).  
Entering standby  
Press POWER on the remote control or on the Player  
to enter standby.  
• The POWER indicator lights red.  
• If you press POWER again immediately after entering  
standby, the Player may not turn on. If this happens, wait  
for 10 seconds or more and then turn on the power again.  
AC adapter  
AC cord  
Indicators on the Player  
NOTE  
• Place the Player close to the AC outlet, and keep the  
power plug within reach.  
POWER (ON/STANDBY) indicator  
Green on  
Red on  
Power on  
Standby  
• TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT  
TOUCH THE UN-INSULATED PARTS OF ANY CABLES  
WHILE THE AC CORD IS CONNECTED.  
• The AC adapter may become warm after long-time use.  
This is normal and does not indicate malfunction.  
• If you are not going to use this Player for a long period of  
time, be sure to remove the AC cord from the AC outlet.  
AQUOS PURE MODE indicator  
Green on Output in AQUOS PURE  
MODE (See page 25.)  
BD/DVD/CD mode indicator  
Turning the Power On  
Blue on  
Playing back  
Blue blinks  
Loading a disc/updating  
3D indicator  
Green on  
Video signal output is 3D  
images (See page 25).  
BD/DVD/CD mode indicator  
POWER  
POWER (ON/STANDBY) indicator  
AQUOS PURE MODE indicator  
3D indicator  
23  
Before Starting Playback  
Language Setting  
Operating a SHARP TV Using the  
Remote Control  
The Universal Remote Control may operate the basic  
functions of the SHARP TV.  
TV function control  
Changing the on-screen display  
language  
1
Press HOME to display the menu screen.  
• The same operation can be performed by pressing  
ENTER after selecting the HOME icon on the Wall  
Paper screen.  
• TV Power: POWER  
• TV-AV Selector: INPUT  
2
Press a/b to select “Settings”, then press d or  
• TV Volume up/down: VOL e/f  
• TV Channel up/down: CH r/s  
ENTER.  
Movie  
Picture  
Music  
e-Contents  
Settings  
Turning Off the Indicator Lights  
If you feel that the indicators on the player are too  
bright when watching movies, you can turn them off  
except for the POWER indicator.  
3
4
Press a/b to select “On Screen Language”,  
then press d or ENTER.  
Press LIGHT to turn the indicators on or off.  
• Each time the button is pressed, the indicators are turned  
on or off.  
• The on/off setting can also be performed using the menu  
screen (See page 41).  
Audio Video Settings  
Smart Settings  
AQUOS LINK  
Playback Setting  
On Screen Language  
Communication Setup  
Version  
USB Memory Management  
Software Update Settings  
System  
Press a/b to select the language you want to  
display on the screen, then press ENTER.  
NOTE  
To select the DVD disc language, such as subtitle  
language, etc., see page 28.  
24  
Before Starting Playback  
Using AQUOS LINK  
Using 3D  
This sets output of 3D images.  
Controlling the Blu-ray disc player  
using AQUOS LINK  
To view 3D images, playback of 3D content (3D BD  
video) is necessary with a 3D compatible TV and 3D  
glasses in addition to this player.  
What is AQUOS LINK?  
Using the HDMI CEC (Consumer Electronics Control), with  
AQUOS LINK you can interactively operate this player with  
your SHARP AQUOS TV.  
What you can do with AQUOS LINK  
When you connect this player to the LCD TV compatible with  
AQUOS LINK using an HDMI cable, you can perform the  
functions listed below. (See page 18 for connecting to the  
HDMI terminal).  
Press 3D to change to the 3D mode.  
• Each time the button is pressed, the mode switches  
between “Auto(3D)” and “2D”.  
The status of the selected mode will be displayed on the  
TV screen.  
E Automatic input select function  
Auto: Video signals are output as 3D when 3D content (3D  
BD video) is played or as 2D when 2D content is played.  
2D: Even if 3D content (3D BD video) is played, video signals  
are output as 2D at all times.  
When you start playback of this player, the input selector of  
the LCD TV will automatically switch to the LCD TV input  
terminal connected to the player and the playback image will  
appear on the screen, even if you are watching a TV program.  
• This setting (Auto(3D)/2D) can also be performed using the  
menu screen (See page 42).  
E Automatic power off function  
If you turn off the LCD TV when this player is in stop mode,  
the power of this player will be turned off automatically.  
(However, when playing back a disc or other content using  
this player, the power does not turn off.)  
Regarding the 3D indicator  
The 3D indicator lights green only when playing 3D content  
(3D BD video) with the setting “Auto(3D)” selected.  
E Automatic power on function  
When you switch to the LCD TV input terminal connected  
to this player, the power of this player will be turned on  
automatically.  
E AQUOS PURE MODE  
3D indicator  
When you connect this player to an AQUOS LCD TV  
compatible with AQUOS LINK and set “AQUOS LINK” to  
Yes” (page 41), images automatically adjusted to the most  
suitable image quality for the AQUOS TV are output from the  
HDMI OUT terminal of this player.  
NOTE  
• The 3D mode can be switched only when playback is  
stopped.  
• Depending on the connected TV, the images during  
playback may switch to 2D images due to changes in  
the resolution, etc. Make sure the 3D image setting is  
performed on the TV.  
The AQUOS PURE MODE indicator on the player lights in  
green.  
• The 3D images may not be output as set in “HDMI Video  
Out”.  
• When performing Fast Forward/Reverse, images are  
shown in 2D.  
AQUOS PURE MODE indicator  
CAUTION  
NOTE  
• When viewing 3D images, viewing for a long period of time  
or lying on your back may cause eye strain and discomfort.  
In addition, 3D images may affect the eyesight of young  
children/infants, so keep them from viewing the images.  
• In order to make AQUOS LINK available, connect an LCD  
TV to this player using an HDMI terminal. Set “AQUOS  
LINK” to “Yes” (See page 41).  
Refer to the Operation Manual of the TV for details  
regarding setup.  
25  
Before Starting Playback  
Control Panel  
Major functions of each button icon  
This function allows you to operate this player using  
the TV remote control by displaying the control panel  
on the TV screen.  
To operate this function, connect this player to a TV  
compatible with HDMI CEC (Consumer Electronics Control)  
using an HDMI cable (See page 18). Make sure that  
“Control Panel” is set to “Yes” (See page 41). When the  
settings are completed, perform the following operations.  
• Display the pop-up menu screen  
POP-UP  
for BD video and the menu screen  
MENU  
for DVD video.  
TOP MENU  
TITLE LIST  
• Display the top menu screen for  
BD video and DVD video.  
NOTE  
• Display the Function Control  
screen for BD video, DVD video,  
etc.  
• The control panel may not be displayed depending on the  
TV. Also, it may not be available depending on the content.  
• When operating using the remote control of the player, the  
control panel does not appear.  
FUNC.  
• When playing video streaming content available with this  
player, the control panel cannot be displayed.  
• Fast reverse (search).  
• Play.  
1
2
Switch the TV input to the input source to which  
this player is connected (HDMI input).  
Press the PLAY button on the TV remote  
control.  
• The control panel appears on the TV screen.  
Control Panel  
• Fast forward (search).  
• Skip to the beginning of a chapter.  
• Pause.  
POP-UP  
MENU  
TOP MENU  
TITLE LIST  
FUNC.  
• Skip to the next chapter.  
INSTANT  
REPLAY  
SKIP  
• Jump backward (approx. 10  
seconds). (This function is used  
when you want to re-watch a  
scene that has just been shown.)  
SEARCH  
INSTANT  
REPLAY  
PANEL  
OFF  
Select  
Enter  
• Stop.  
• When there is no operation for approximately 10  
seconds, the control panel disappears automatically.  
To display the control panel, press the PLAY button  
on the TV remote control.  
SKIP  
SEARCH  
• Jump ahead (approx. 30  
seconds).  
3
Press a/b/c/d on the TV remote control  
to select the desired button icon, then press  
ENTER.  
PANEL  
OFF  
Turn off the control panel.  
• The function of the selected button icon is available.  
26  
Video/Picture/Music Playback  
NOTE  
Loading a Disc/Ejecting a Disc  
• The disc load time may vary depending on the disc.  
Regarding playback of BD video discs  
• Some of the newly released BD video discs cannot be  
played back unless you update the player software to the  
latest version. Therefore, it may be required to update the  
software of the player.  
Refer to pages 48–50 for more information regarding  
software updates for the player.  
To stop playback  
POWER  
EJECT  
Press H STOP.  
1
2
Press POWER to turn on the power.  
Load a disc into the disc slot.  
• Insert the disc with the label face up.  
• In case of disc recorded on both sides, face down the  
side to play back.  
Resume playback function  
• If you press d PLAY next, playback will resume from  
the point where the Player was previously stopped. To  
playback from the beginning, cancel resume mode by  
pressing H STOP, then press d PLAY. (This may not  
work depending on the type of disc.)  
NOTE  
• Resume playback may not function depending on the disc.  
• The resume playback function for discs will be cancelled  
if streaming content is viewed after disc playback. Disc  
playback will start from the beginning after viewing  
streaming content.  
To eject a disc  
Displaying the disc information  
While in stop mode, press EJECT.  
BD/DVD Video Playback  
BD VIDEO  
BD-RE  
DVD-R  
BD-R  
DVD-RW  
Press DISPLAY during playback.  
• Each time you press DISPLAY, the display switches  
DVD VIDEO  
as follows.  
This section explains playback of commercially  
available BD Video and DVD Video discs (like movies)  
and recorded DVD-RW/R discs.  
• This player supports DVD upscaling during DVD playback.  
• For a description of other playback functions, refer to  
“Playback Functions” on pages 34–36.  
Disc Information Screen A  
BD-VIDEO  
1
2
1/1  
1/101  
00:00:12  
/03:12:28  
3
4
Disc Information Screen B  
00:00:12  
/03:12:28  
4
1
2
Load a disc.  
Playback may begin automatically, depending on the disc.  
• Playback begins from the first title.  
• The menu may be displayed first, depending on the  
disc. Perform playback operation by following the  
directions on the screen.  
• When loading a disc containing 3D content (3D BD  
video) with “Yes” selected in the “3D Notice” setting  
(page 42), playback will be stopped and the 3D notice  
will be displayed on the TV screen. In such cases,  
press ENTER for confirmation, and then playback will  
start.  
No Display  
1 Type of disc  
2 Title number being played / Total number of Titles  
3 Chapter number being played / Total number of  
Chapters  
4 Elapsed playback time / Total playback time for the  
Title  
Press d PLAY if playback does not begin  
automatically or playback is stopped.  
NOTE  
• Disc Information Screen A disappears after about 1 minute  
elapses without performing any operations.  
• For some commercially-released BD VIDEO discs, the total  
playback time display for the Chapter/Title may not appear.  
27  
Video/Picture/Music Playback  
BD/DVD Menus  
Using the disc menu  
• This section explains how to play back a BD/DVD  
video disc with a top menu, disc menu or pop-up  
menu.  
• The titles listed in the top menu and a disc guide (for  
options like subtitles and audio languages) are given  
in the disc menu.  
DVD VIDEO  
Example: Select “SUBTITLE LANGUAGE”.  
1
Press TOP MENU/TITLE LIST.  
• The disc menu screen is displayed if present on the  
DVD video disc.  
2
Press a/b to select “SUBTITLE LANGUAGE”,  
then press ENTER.  
• The screen for selecting the subtitle language is  
displayed.  
Example  
MENU  
1
2
3
AUDIO LANGUAGE  
SUBTITLE LANGUAGE  
AUDIO  
Start playback by selecting a title  
from the top menu  
BD VIDEO DVD VIDEO  
3
4
Press a/b to select the subtitle language, then  
1
Press TOP MENU/TITLE LIST.  
• The top menu screen is displayed if present on the  
BD/DVD video disc.  
press ENTER.  
Press TOP MENU/TITLE LIST to exit.  
Example  
Using the pop-up menu  
T O P M E N U  
1
3
2
Jazz  
Latin  
BD VIDEO  
4
Classic  
Rock  
1
Press POP-UP MENU during playback.  
• The pop up menu screen is displayed.  
• The menu contents displayed vary depending on the  
disc. For details on how to see and operate the pop-  
up menu, refer to the manual for the disc.  
2
Press a/b/c/d to select the title, then press  
ENTER.  
• The selected title is played back.  
Example  
NOTE  
Pop-up menu  
• The procedure explained on this page is the basic  
operation procedure. Procedures vary depending on  
the BD/DVD video disc, so you may need to follow the  
instructions in the BD/DVD video disc manual or the  
instructions displayed on the screen.  
Previous page  
Next page  
Top menu  
2
3
Press a/b/c/d to select the desired item,  
• With some BD/DVD discs, the top menu may be referred  
to as the “Title Menu”. Use TOP MENU/TITLE LIST on  
the remote control when the instructions refer to “Title  
Menu”.  
then press ENTER.  
Press POP-UP MENU to exit.  
• The pop-up menu will automatically disappear for  
some discs.  
• If no top menu is available, the TOP MENU/TITLE LIST  
button will have no effect.  
28  
Video/Picture/Music Playback  
Enjoying BONUSVIEW or BD-LIVE  
BD VIDEO  
1
2
Press PinP during playback to show the 2-  
This Player is compatible with additional functions of  
BD-Video, BONUSVIEW (BD-ROM Profile 1 Version  
1.1) and BD-LIVE.  
For BD-Video discs compatible with BONUSVIEW, the  
functions of Picture in Picture and Virtual Package are  
available. For BD-LIVE compatible discs, you can enjoy  
a variety of functions via the Internet in addition to the  
BONUSVIEW functions.  
picture screen.  
Virtual Package/BD-LIVE data is saved in Local  
Storage (USB memory device connected to this  
Player). To enjoy these functions, connect a USB  
memory device (2GB or greater) supporting USB 2.0  
High Speed (480Mbit/s) to the USB terminal on this  
player.  
Primary  
audio/video  
Secondary  
audio/video  
To remove the secondary video, press PinP  
again.  
NOTE  
To listen to secondary audio, set the digital audio output  
setting (See “Audio Out” on page 40) according to the  
digital audio output format selection table on page 51.  
• The secondary audio and video for Picture In Picture may  
automatically play back and be removed depending on the  
content. Also, playable areas may be restricted.  
When you insert or remove a USB memory device, be sure to  
turn the main power off.  
USB memory  
device  
Virtual Package  
• If there is insufficient storage space, the data will not be  
copied/downloaded. Delete unneeded data or use a new  
USB memory device.  
• If a USB memory device containing other data (previously  
recorded) is used, the video and audio may not play back  
properly.  
• If the USB memory device is disconnected from this player  
during playback of Virtual Package/BD-LIVE data, playback  
of the disc will stop.  
For BD-Video discs compatible with Virtual Package,  
data is copied from the discs or Internet to local  
storage. It is automatically copied to the local storage  
prior to playback. You can enjoy a variety of additional  
functions including secondary video, secondary audio,  
subtitles, movie trailers, etc.  
• The playback methods vary depending on the disc. For  
details, refer to the disc manual.  
• Some time may be required for the data to load (read/write).  
• Refer to “USB Memory Management” on page 47 for  
erasing the Virtual Package data and the BD-LIVE data in  
the USB memory device.  
BD-LIVE  
In this Player, a variety of contents with interactive  
functions are available through BD-LIVE compatible Blu-  
ray discs by connecting to the Internet. You can enjoy  
the download of bonus features such as latest movie  
trailers to the USB memory device, communication  
compatible BD-J interactive games, etc.  
NOTE  
• SHARP cannot guarantee that all brands’ USB memory  
devices will operate with this player.  
• Only USB memory devices formatted with FAT 32/16 are  
compatible.  
When formatting a USB memory device using a PC,  
perform the following settings.  
• The available functions differ depending on the disc.  
NOTE  
Format File System: FAT32  
• Regarding playback method of BD-LIVE contents, etc.,  
perform the operations in accordance with the instructions  
in the BD disc manual.  
Allocation Unit Size: Default Allocation Size  
• Do not use a USB extension cable when connecting a USB  
memory device to the USB terminal of the player.  
− Using a USB extension cable may prevent the player  
from performing correctly.  
To enjoy BD-LIVE functions, perform the broadband  
Internet connection (pages 20–21) and communication  
settings (pages 43–46).  
• Before using this function, please read “Network Service  
Disclaimer” (page x).  
• Refer to page 42 regarding the setup to restrict access to  
BD-LIVE contents.  
Use of Picture in Picture function  
(secondary audio/video playback)  
If the BD-LIVE screen does not appear for a while after  
you select the BD-LIVE function in the BD disc menu, the  
USB memory device may not have enough free space. In  
such cases, eject the disc from the player, and then erase  
the data in the USB memory device in the “USB Memory  
Management” menu on page 47.  
BD-Video that includes secondary audio and video  
compatible with Picture in Picture can be played back  
with secondary audio and video simultaneously as a  
small video in the corner.  
29  
Video/Picture/Music Playback  
DVD-R/-RW (VR format) / BD-RE/-R  
(BDAV format) Playback  
Playback by selecting a title  
1
Load a recorded disc.  
• Disc playback will begin automatically.  
• Playback begins from the first title.  
DVD-R DVD-RW  
BD-RE  
BD-R  
You can play back a recorded disc (DVD: VR format  
finalized disc only / BD: BDAV format disc only).  
• For a description of other playback functions, refer to  
”Playback Functions” on pages 34–35.  
2
3
Press H STOP.  
Press TOP MENU/TITLE LIST.  
• The Title List screen is displayed.  
Program 1  
1
5/21 Fri 9:30 AM 110 Min.  
1 Program 1  
2 Program 2  
3 Program 3  
4 Program 4  
5 Program 5  
6 Program 6  
5/21 Fri 110 Min.  
Program  
1
6/15 Fri 110 Min.  
7/3 Mon 56 Min.  
9/18 Thu 40 Min.  
9/20 Sat 20 Min.  
9/25 Thu 60 Min.  
2
3
1/All 8 Titles  
㪜㪯㪠㪫  
Exit  
Select  
Enter  
Return  
Playlist  
C
1 Information of selected title  
2 Title Name  
Recording Date  
Recording Duration  
3 Button Guide  
• When loading a BD disc with usage restrictions placed  
by a BD recorder, the password input screen appears.  
Then, input your password.  
If you input a wrong password three times, the disc  
will be ejected. Load the disc into the disc slot again,  
and then input a correct password.  
NOTE  
• “Finalize” refers to a recorder processing a recorded disc  
so that it will play in other DVD players/recorders as well  
as this player. Only finalized DVD discs will play back in  
this player. (This player does not have a function to finalize  
discs.)  
4
5
Press a/b to select the desired title, then press  
ENTER to start playback.  
• If you want to select additional titles, switch pages by  
pressing PAGE r/s.  
• Some discs cannot be played back depending on the  
audio format.  
• BD-RE/-R discs recorded from a BD recorder comply with  
AACS copyright protection technology. As this player is not  
intended to be compliant with AACS, such discs cannot be  
played back.  
The same operation can be performed by pressing  
KSKIP or LSKIP/l.  
You can playback by pressing d PLAY instead of  
pressing ENTER.  
Press H STOP to stop playback.  
(AACS: Advanced Access Content System)  
Playback by selecting a Playlist  
1
Press C (Blue) while the Title List screen is  
displayed.  
• The Playlist screen is displayed.  
2
3
Press a/b to select the desired title, then press  
ENTER to start playback.  
Press H STOP to stop playback.  
30  
Video/Picture/Music Playback  
Audio CD Playback  
To skip the track during playback  
AUDIO CD  
Press KSKIP or LSKIP/l.  
• Press KSKIP to skip backward.  
• Press LSKIP/l to skip forward.  
This Player can play back audio CDs.  
• For a description of other playback functions, refer to  
“Playback Functions” on pages 34–35.  
Operation procedure for the  
“Functions” menu  
1
Press D (Yellow) (Functions) when the CD screen  
is displayed.  
• The “Functions” menu is activated.  
2
Press a/b to select the desired setting, then  
press ENTER.  
Playback from the beginning  
• When playback is stopped, only “Track” can be  
selected.  
1
Load an audio CD.  
• The CD screen is displayed.  
• For a description of each setting, see “Functions  
which can be set” (Page 38).  
(The CD screen is displayed only when a compact  
disc recorded in the CD-DA format is inserted.)  
• Playback may begin automatically, depending on the  
disc.  
3
4
Press a/b/c/d to set, then press ENTER.  
• Operations vary depending on the setting. Follow the  
operation instructions on the screen.  
Example: when playing back Track 6  
Press n RETURN or D (Yellow) to exit the  
“Functions” menu.  
NOTE  
• The displayed items vary depending on the disc.  
• Audio channel and time skip functions are not available.  
2
3
4
Press d PLAY if playback does not begin  
automatically or playback is stopped.  
To pause the playback at any time, press F PAUSE.  
• Press F PAUSE or d PLAY to return to playback.  
Press H STOP to stop playback.  
NOTE  
• Time display for each track will not be indicated on the  
screen until the track is played back.  
31  
Video/Picture/Music Playback  
5
Press ENTER to play back the selected file.  
• Playback of the selected file will begin.  
Audio Data (MP3 File) Playback  
CD-R  
CD-RW  
DVD-R  
DVD-RW  
USB  
This Player can play back audio data (MP3 files)  
recorded on CD-R/RW discs, DVD-R/RW discs and  
USB memory devices.  
• For details on the audio data that you can play using this  
player, refer to page 10.  
• When MP3 files are played, the “Functions” menu is  
not available.  
6
7
To pause the playback at any time, press F PAUSE.  
• Press F PAUSE or d PLAY to return to playback.  
Press H STOP to stop playback.  
To play another file during Playback  
Press a/b to select the file you want to play, then  
press ENTER.  
• The chosen file will be played.  
To skip the file during Playback  
Press KSKIP or LSKIP/l.  
• Press KSKIP to skip backward.  
• Press LSKIP/l to skip forward.  
Playing back Audio data (MP3 files)  
When you insert or remove a USB memory device, be  
sure to turn the main power off.  
1
Load a disc or insert a USB memory device  
containing audio data (MP3 files), then press  
HOME to display the menu screen.  
2
3
Press a/b to select “Music”, then press d or  
ENTER.  
Press a/b to select “DVD/CD*” or “USB  
Memory Device”, then press d or ENTER.  
*
Display name varies depending on the type of media  
inserted.  
• If only a “DVD/CD” or a USB memory device is  
inserted, the “DVD/CD” or “USB Memory Device”  
selection screen does not appear. In such cases, after  
step 2, proceed to step 4.  
4
Press a/b to select a folder or file.  
• When you select a folder, press ENTER to open it,  
and then press a/b to select a file in the folder.  
Folder 1  
CD  
1 Folder 1  
2 Folder 2  
3 Folder 3  
4 Folder 4  
5 Track 01.mp3  
6 Track 02.mp3  
NOTE  
• The Fast Forward/Reverse function does not work.  
• The Repeat function does not work.  
• When data in the USB memory device is played back,  
playback from the USB memory device will stop when  
EJECT on the remote control or the player is pressed or  
when a disc is inserted into the player.  
1/All 14 files and folders  
32  
Video/Picture/Music Playback  
NOTE  
Displaying Still Images (JPEG files)  
• Thumbnail data will be displayed when JPEG files from a  
digital camera contain thumbnail data.  
CD-R  
CD-RW  
DVD-R  
DVD-RW  
USB  
• An icon will be displayed for JPEG files which do not  
contain thumbnail data.  
• When data in the USB memory device is played back,  
playback from the USB memory device will stop when  
EJECT on the remote control or the player is pressed or  
when a disc is inserted into the player.  
This Player can display still images (JPEG files)  
recorded on CD-R/RW discs, DVD-R/RW discs and  
USB memory devices.  
• For details on the still images that you can display using  
this player, refer to page 10.  
• Still images are played one by one while during “Slide  
show”, they are automatically replaced one after another.  
5
Press ENTER to display the selected file.  
• The selected still image appears on the screen.  
1/77  
6
7
Press KSKIP or LSKIP/l to replace  
one image with another.  
• The same operation can be performed by pressing  
S REV/V FWD.  
• Press n RETURN if you wish to return to the  
selection screen.  
To stop the still image display at any time, press  
H STOP.  
Playing back Slide Show  
Displaying Still Images (JPEG files)  
1
To play back Slide Show, in Step 6 of the  
“Displaying Still Images (JPEG files)”, press  
d PLAY (Slide Show).  
When you insert or remove a USB memory device, be  
sure to turn the main power off.  
• The still images inside the selected folder are played  
as a slide show.  
1
Load a disc or insert a USB memory device  
containing Still Images (JPEG files), then press  
HOME to display the menu screen.  
2
3
To pause the playback at any time, press  
F PAUSE.  
• Press d PLAY to return to playback of a slide show.  
2
3
Press a/b to select “Picture”, then press d or  
ENTER.  
To stop the playback at any time, press  
H STOP.  
Press a/b to select “DVD/CD*” or “USB  
Memory Device”, then press d or ENTER.  
*
Display name varies depending on the type of media  
inserted.  
Setting slide show speed/repeat  
playback  
• If only a “DVD/CD” or a USB memory device is  
inserted, the “DVD/CD” or “USB Memory Device”  
selection screen does not appear. In such cases, after  
step 2, proceed to step 4.  
1
Press D (Yellow) (Slide Show Menu) while the  
selection screen is displayed.  
• The setting screen for “Slide Show Speed”/“Repeat  
Mode Setting” appears.  
4
Press a/b to select a folder or file.  
• When you select a folder, press ENTER to open it,  
and then press a/b to select a file in the folder.  
2
3
Press a/b to select “Slide Show Speed”, then  
press d or ENTER.  
Press a/b to select the desired speed, then  
press ENTER.  
• The slide show speed may be selected from “Fast”,  
“Normal”, “Slow1” and “Slow2”.  
Folder 1  
CD  
1 Folder 1  
2 Folder 2  
3 Folder 3  
4 Folder 4  
5 Image 01.jpg  
6 Image 02.jpg  
4
5
Press a/b to select “Repeat Mode Setting”,  
then press d or ENTER.  
Press a/b to select the desired item, then  
press ENTER.  
• The desired item may be selected from “Yes” or “No”.  
1/All 14 files and folders  
6
Press EXIT to exit.  
33  
Playback Functions  
Pause/Frame Advance Playback  
BD VIDEO  
BD-R  
BD-RE  
DVD VIDEO  
DVD-R  
DVD-RW  
The Pause function is enabled when F PAUSE is  
pressed during playback. (If you are playing back an  
audio CD, audio data [MP3 files] or still images [JPEG  
files], these will also pause.)  
The Frame Advance Playback function is enabled when  
L SKIP/l is pressed during pause.  
• Frame Advance Playback may not function properly with  
discs other than DVD-RW/R (VR format).  
NOTE  
• Some BD/DVD Video discs are not compatible with Pause/  
Frame Advance Playback.  
• Frame Reverse Playback cannot be performed with this  
player.  
NOTE  
• Some operations in the following playback functions  
cannot be performed depending on the specifications of  
the disc.  
• Frame Advance Playback does not work for BD-R/-RE.  
Slow Playback  
Fast Forward/Reverse (Search)  
BD VIDEO  
BD-R  
BD-RE  
BD VIDEO  
DVD VIDEO  
AUDIO CD  
BD-R  
DVD-R  
BD-RE  
DVD-RW  
DVD VIDEO  
DVD-R  
DVD-RW  
The Slow Playback function is enabled when  
L SKIP/l or is pressed for more than 2  
seconds during pause.  
The Fast Forward/Reverse function is enabled when  
G REV or J FWD is pressed during playback.  
Example: When J FWD is pressed  
• Press d PLAY to return to normal playback.  
• The search speed will change each time you press the  
button.  
NOTE  
• This doesn't work for audio CDs.  
You cannot perform Slow Playback between titles. At the  
end of the title, Slow Playback will be cancelled and normal  
playback will automatically resume.  
• Reverse Slow Playback cannot be performed with this  
player.  
When playing back a DVD  
You cannot perform Fast Forward/Fast Reverse from  
one title and continue to another title (except when  
playing audio CDs). At the end or beginning of the title,  
Fast Forward/Fast Reverse will be cancelled and normal  
playback will automatically resume.  
NOTE  
Skip Search  
• Subtitles are not played back with BD/DVD video discs  
during Fast Forward and Fast Reverse.  
BD VIDEO  
BD-R  
BD-RE  
DVD-RW  
DVD VIDEO  
DVD-R  
Skipping to the Next or the Start of  
the Current Chapter (Track/Title)  
Playback skips 30 seconds ahead when SKIP SEARCH  
is pressed during playback.  
BD VIDEO  
BD-R  
DVD-R  
CD-R  
BD-RE  
DVD-RW  
CD-RW  
Replay  
DVD VIDEO  
AUDIO CD  
BD VIDEO  
BD-R  
DVD-R  
BD-RE  
DVD-RW  
USB  
DVD VIDEO  
The Skipping (to the beginning of a chapter, track or  
title) function is enabled when T SKIP or  
U SKIP/l is pressed during playback.  
Playback jumps back 10 seconds when REPLAY is  
pressed during playback.  
34  
Playback Functions  
Repeat Playback of a Title or  
Chapter (Repeat Playback)  
Partial Repeat Playback (Repeat  
Playback of a Specified Part)  
BD VIDEO  
DVD VIDEO  
AUDIO CD  
BD-R  
BD-RE  
DVD VIDEO  
AUDIO CD  
DVD-R  
DVD-RW  
DVD-R  
DVD-RW  
1
2
Press REPEAT during playback.  
Press a/b to select “Scene Selection”, then  
press ENTER.  
• “Set Start Point” displays.  
1
2
3
Play back the title or chapter you want to repeat.  
Press REPEAT.  
Press a/b to select the type of Repeat  
Playback.  
• Playback Title: Repeats the title currently being played  
back.  
Playback Title  
Playback Chapter  
• Playback Chapter: Repeats the chapter currently  
being played back.  
• Scene Selection: Repeats the specified scene of title  
or chapter.  
Scene Selection  
Set Start Point  
3
4
Press ENTER at the scene where you want to  
set the start point.  
Playback Title  
Playback Chapter  
Scene Selection  
• “Set End Point” displays.  
Press ENTER at the scene where you want to  
set the end point.  
You can press V FWD to fast forward to the scene  
where you want to set the end point. When you  
reach the desired scene, simply press I PLAY and  
then ENTER to set the end point. To cancel Repeat  
Playback, press REPEAT-OFF or REPEAT.  
• Press n RETURN to cancel without setting the  
type of Repeat Playback.  
• For Audio CD, you can select “Playing Disc”, “Playing  
Track” and “Specify The Part” as Repeat Playback  
options.  
NOTE  
• Press LSKIP/l, the Repeat Playback is cancelled  
4
Press ENTER.  
Example: Repeat playback of a title (TITLE)  
and the next chapter being play back.  
• Press KSKIP once, the Repeat Playback is cancelled  
and the player returns to the start of current chapter (track).  
• If you press KSKIP again (within about 5 seconds)  
the player will skip to the beginning of the previous chapter  
(track).  
• For Partial Repeat Playback, set the start and end points  
within the same title.  
• Repeat Playback may be forbidden depending on the disc.  
• Partial Repeat Playback may not work in multi-angle  
scenes.  
• If you press DISPLAY, you can confirm the Repeat  
Playback status.  
BD-VIDEO  
1/3  
5/25  
00:20:30  
2 English  
1
1 DTS  
On Title Repeat  
On Title Repeat  
5
Press REPEAT-OFF or REPEAT to return to  
normal playback.  
NOTE  
• “Scene Selection” operation is not available for BD video.  
35  
Playback Functions  
Displaying the Audio Information  
Switching the Angle  
You can display the audio information on the disc  
currently being played back by pressing AUDIO.  
• The displayed contents vary depending on the disc.  
BD VIDEO  
DVD VIDEO  
If multiple angles are recorded, you can switch  
between them.  
BD VIDEO  
DVD VIDEO  
Press ANGLE during playback.  
The audio channel currently being played back will be  
displayed.  
If multiple audio channels are recorded, you can switch  
the audio channel by pressing AUDIO.  
• The display indicates the angle number currently being  
played back. Each time you press ANGLE, the angle  
switches.  
To return to the previous angle, press ANGLE to cycle  
through the angles until you return to the original angle.  
DVD-RW  
DVD-R  
When a recorded broadcast with stereo or  
monaural audio is played back:  
NOTE  
• The displayed items vary depending on the disc.  
• If you access the Function Control screen during playback  
of a BD/DVD video, it may be impossible to operate the  
BD/DVD video playback. In cases like this, close the  
Function Control screen.  
“Stereo” is displayed. (Audio cannot be switched.)  
NOTE  
• When you play a program recorded in stereo or monaural,  
and if you are listening to the Bitstream sound via the digital  
output jack, you cannot select the audio channel. Set the  
digital audio output setting to “PCM” (page 40).  
• Settings for audio can also be changed in the Function  
Control screen (Page 37).  
• The operation of angles differs according to each disc. You  
may need to refer to the operation manual of the disc.  
• The display for angle information automatically disappears  
after 5 seconds.  
• The operation of audio differs according to each disc. You  
may need to refer to the operation manual of the disc.  
• The display for audio information automatically disappears  
after 5 seconds.  
Displaying the Angle Mark  
BD VIDEO  
DVD VIDEO  
You can change settings so that Angle Mark appears  
in the right bottom part of the screen when multiple  
angles are recorded. The settings can be changed in  
“Settings” – “Playback Setting” – “Angle Mark Display”  
(Page 41).  
Switching Subtitles  
BD VIDEO  
DVD VIDEO  
If subtitles are provided in multiple languages, you can  
switch between them.  
Press SUBTITLE during playback.  
• The display indicates the subtitle number currently being  
played back, and the subtitles appear.  
Each time SUBTITLE is pressed, the subtitles change.  
• “–” is displayed if a disc has no subtitles.  
You can also select “Off”.  
NOTE  
• Settings for subtitles can also be changed in the Function  
Control screen (Page 37).  
• The operation of subtitles differs according to each disc.  
You may need to refer to the operation manual of the disc.  
• The display for subtitle information automatically  
disappears after 5 seconds.  
36  
Settings During Playback  
Function control operation  
procedure  
Function Control  
BD VIDEO  
DVD VIDEO  
AUDIO CD  
BD-R  
BD-RE  
DVD-R  
DVD-RW  
This allows you to adjust various settings at once, like  
subtitles, angle settings and the title selection for Direct  
Playback. You can adjust the video and audio to suit  
your preferences. The operations are the same for BD  
and DVD.  
1
Press FUNCTION during playback.  
• The Function Control screen is displayed on the TV.  
2
Press a/b to select the desired setting, then  
press ENTER.  
Function Control screen  
• For a description of each setting, see “Functions  
which can be set” (Page 38).  
BD-VIDEO  
1
1/3  
5/25  
BD-VIDEO  
00:20:30  
2 English  
1
1 DTS  
Off  
1/3  
2
5/25  
00:20:30  
2 English  
1
1 DTS  
Off  
ENTER  
Select  
Enter  
Return  
㪜㪯㪠㪫  
Exit  
3
1 Playback status display  
Shows the operation status and the disc type.  
3
4
Press a/b/c/d to set, then press ENTER.  
• Operations vary depending on the setting. Follow the  
operation instructions on the screen.  
Press n RETURN or FUNCTION to close the  
Function Control screen.  
2 Setting items  
Selects a title (or track) or chapter for playback, or performs  
video/audio settings.  
NOTE  
• If “– –” is displayed for an option like title number or  
subtitles, the disc has no titles or subtitles which can be  
selected.  
• The displayed items vary depending on the disc.  
• If you access the Function Control screen during playback  
of a BD/DVD video, it may be impossible to operate the  
BD/DVD video playback. In cases like this, close the  
Function Control screen.  
• Title/Track Number (Direct Title/Track Skip)  
• Chapter Number (Direct Chapter Skip)  
• Playback Elapsed Time (Direct Time Skip)  
• Subtitle Language  
• Angle Number  
• Audio  
• Repeat  
3 Operation guide display  
Provides help on remote control button operations.  
37  
Settings During Playback  
Functions which can be set  
Title/Track Number (Direct Title/Track Skip)  
• Shows the title number being played back (or track number when playing back an audio  
CD). You can skip to the start of the title (or track).  
To skip to the start of a selected title (or track), press the Number buttons to enter the  
title (or track) number when this option is highlighted.  
Chapter Number (Direct Chapter Skip)  
• Shows the chapter number being played back. You can skip to the start of the chapter.  
To skip to the start of a selected chapter, press the Number buttons to enter the  
chapter number when this option is highlighted.  
Playback Elapsed Time (Direct Time Skip)  
• Shows the time elapsed from the beginning of the current disc title (or track). This lets  
you skip to a specific time.  
• Press c/d to select the Hour, Minute or Second, then press a/b or the Number  
buttons to set the time. Press ENTER to start playback at the set time.  
NOTE  
ENTER button under the Cover: Enters the input number.  
CLEAR button under the Cover: Clears the input number.  
Subtitle Language  
• Shows the currently selected subtitle language. If subtitles are provided in other  
languages, you can switch to your preferred language.  
Angle Number  
• Shows the currently selected angle number. If the video is recorded with multiple angles,  
you can switch the angle.  
Audio  
• Shows the currently selected type of audio. You can select the desired type of audio.  
Repeat  
• The current Title (or Chapter) or partial segments can be repeatedly played back. Repeat  
Playback is also possible with the REPEAT button on the remote control.  
NOTE  
• These functions may not work with all discs.  
38  
SSetEtingTs TINGS  
Common operations  
The “menu” enables various audio/visual settings and adjustments on the functions using the remote control unit.  
You need to call up the On Screen Display to perform settings for this player. The following is the explanation for  
the basic operations of the “menu”.  
Example: Setting “AQUOS LINK”  
Display the menu screen  
Select a menu item  
1
2
Press HOME to display the menu screen.  
Press a/b to select “AQUOS LINK”,  
then press d or ENTER.  
Movie  
Picture  
Music  
e-Contents  
Settings  
• The same operation can be performed  
by pressing ENTER after selecting the  
HOME icon on the Wall Paper screen.  
Press a/b to select “Settings”, then press  
d or ENTER.  
Audio Video Settings  
Smart Settings  
AQUOS LINK  
Playback Setting  
On Screen Language  
Communication Setup  
Version  
USB Memory Management  
Software Update Settings  
System  
Select the next item  
3
Press a/b to select the desired item,  
then press ENTER.  
Exit the menu screen  
4
Press n RETURN to return to the  
previous “menu” page.  
Press HOME or EXIT to exit.  
2 Enter a 4-digit number for the password, then  
Basic Operation for Playback Setting  
the same 4-digit number for confirmation.  
Example: Setting “Parental Control” under “Playback Setting”  
3 Press ENTER to complete the password setting  
1
Press HOME to display the menu screen.  
• The same operation can be performed by pressing  
ENTER after selecting the HOME icon on the Wall  
Paper screen.  
procedure and move to the next setting screen.  
6
Press c/d to select the parental control level  
for DVD VIDEO/BD-ROM, and then select the  
country code. Press ENTER after making each  
selection.  
2
3
4
Press a/b to select “Settings”, then press d or  
ENTER.  
Press a/b to select “Playback Setting”, then  
press d or ENTER.  
Press a/b to select “Parental Control”, then  
press d or ENTER.  
• When you operate this Player for the first time, the  
password setting screen will be displayed. See “When  
setting the password for the first time” below.  
Example: when the selected parental control level is “8”  
Parental Control  
Disc Language  
Angle Mark Display  
Password Setting  
BD Internet Access  
8 [Adult]  
USA  
5
Enter your 4-digit password.  
You cannot move to the next setting screen until you  
can input the correct password.  
When setting the password for the first time.  
1 To set the password for the first time, press a/b  
to select “Yes” to enter the password setting  
menu, then press d or ENTER.  
7
Press HOME or EXIT to exit.  
39  
SETTINGS  
Audio Video Settings  
Audio Out  
This lets you set the digital audio output format  
according to the capabilities of the connected audio  
equipment.  
TV Aspect Ratio  
You can set the screen aspect ratio of the connected  
TV, and adjust the video output.  
If you switch your TV (i.e. because you have bought a  
new one) and the screen aspect ratio of the connected  
TV changes, you will have to change the “TV Aspect  
Ratio” setting.  
To listen to the secondary audio of Blu-ray discs, select  
“PCM” or “Bitstream (Mix)”.  
• For details, refer to the digital audio output format selection  
table on page 51.  
Item  
PCM, Bitstream (Mix), Bitstream  
Item  
Wide 16:9: Select this when connecting to a TV with a  
16:9 screen aspect ratio.  
Normal 4:3: Select this when connecting to a TV with a  
4:3 screen aspect ratio.  
NOTE  
• Make sure to select a compatible digital audio output  
format, otherwise you will hear no sound or a garbled  
noise.  
• If the HDMI device (Receiver, TV) is not compatible with  
compressed formats (Dolby digital, DTS), the audio signal  
outputs as PCM.  
• Secondary and Effect audio is not present on DVD video.  
• This setting has no effect on the analog (L/R) audio or  
HDMI audio output to your TV. It is only valid for the optical  
and HDMI audio output to a receiver.  
• If you play MPEG audio soundtracks, the audio signal  
format will be PCM regardless of digital audio output format  
selection (PCM or Bitstream).  
<When selecting Normal 4:3>  
Item  
Letter Box: If you connect to a TV with a screen aspect  
ratio of 4:3 and playback a DVD with 16:9 video, the  
video will be played back with black bands at the top  
and bottom while maintaining the 16:9 ratio.  
Pan Scan: If you connect to a TV with a screen aspect  
ratio of 4:3 and playback a DVD with 16:9 video, the  
video will be played back with the left and right sides of  
the image cut off to display in 4:3 screen aspect ratio.  
(This function works if the disc is labelled for 4:3PS.)  
Dynamic Range Control  
This lets you adjust the range between the loudest  
and softest sounds (dynamic range) for playback  
at average volume. Use this when it is hard to hear  
dialog.  
HDMI Video Out  
This sets the resolution of the HDMI video output.  
Some TVs are not fully compatible with the Blu-ray  
disc player, which may cause the image distortion.  
In this case, press VIDEO OUTPUT RESET on the  
remote control for five seconds. “HDMI Video Out” will  
be reset to “Auto” (factory preset value).  
Item  
Normal: The same audio output range is played as the  
original recorded audio output range.  
Shift*: When Dolby Digital audio is played back, the  
dynamic range of the audio is adjusted so that the  
dialog portion can be heard easily. (If the audio sounds  
abnormal, set to “Normal”.)  
Item  
Auto: When you play back audio in the Dolby TrueHD  
format, the dynamic range is automatically adjusted.  
Auto, 1080p, 1080i, 720p, 480p  
NOTE  
*
Lower the audio volume before setting. If you do not do so,  
the speakers may emit a loud sound or excessive output  
may be applied to the speakers.  
• When the BD player is connected to a 1080p 24Hz  
compatible TV and the “HDMI Video Out” is set to  
“Auto”, 1080p 24Hz will automatically be displayed when  
compatible discs are played back.  
40  
SETTINGS  
Smart Settings  
Playback Setting  
Auto Power Off  
Parental Control  
This sets the Player so that power is automatically shut  
off if playback is stopped and you do not perform any  
operations for about 10 minutes.  
This lets you set the Parental Control for BD-ROM/  
DVD-video depending on the disc content.  
The 4-digit password number needs to be entered  
before the Parental Control Levels and the Country  
Code are set. The Parental Control Levels and the  
Country Code cannot be set if a password has not  
been created or the password is not entered.  
• Select the rating level appropriate for the age of the user.  
Item  
Yes, No  
Front LED  
If you feel that the indicators on the player are too  
bright when watching movies, you can turn them off  
except for the POWER indicator.  
Item (Parental control level)  
8 and Off: All BD-video/DVD-video can be played.  
1–7: Prohibits play of BD-video/DVD-video with  
corresponding ratings recorded on them.  
Item  
On, Off  
Item (Country code)  
Select the country code.  
• The ratings differ according to the country.  
Control Panel  
This lets you set display of the control panel on the TV  
screen to on or off.  
NOTE  
• Refer to “Basic Operation for Playback Setting” on page 39  
for details.  
Item  
Yes, No  
Disc Language (Disc Priority Language)  
Screen Saver  
This lets you select the language for subtitles, audio  
and menus displayed on the screen.  
This function helps prevent burn-in on the TV screen  
by leaving the player with the power turned on for a  
long period of time. This lets you set the length of time  
before it activates.  
Item (Subtitle)  
Select the subtitle language you want to display.  
Item  
Off, 5min, 10min, 20min, 30min  
Item (Audio)  
Select the audio language you want to hear.  
AQUOS LINK  
Item (Menu)  
Select the menu language you want to display.  
This lets you set the Player to receive the control signal  
from the AQUOS LINK remote control via the HDMI  
cable.  
NOTE  
• When “Auto” is selected, the priority language of the disc  
will be played back.  
Item  
Yes, No  
NOTE  
Angle Mark Display  
• For details, refer to the operation manual of TV.  
This lets you turn the Angle Mark Display on or off  
when BD/DVD video recorded with multiple angles is  
played back. (The Angle Mark is displayed in the lower  
right screen.)  
Item  
Yes, No  
(Continued on the next page)  
41  
SETTINGS  
Password Setting  
On Screen Language  
This sets the password for setting or changing the  
Parental Control Level.  
You can set the language you want to display on the  
screen.  
Item  
Item  
English, Español, Français  
Yes: Enter the 4-digit number.  
No  
NOTE  
Version  
• When you forget the password, you can reset the current  
password using “System Reset” under “Settings”. (See this  
page.)  
When you select “Version”, the system software  
version and Netflix ESN are displayed.  
You can also set the new password if desired.  
System  
BD Internet Access  
System Reset  
This allows you to set access restriction to BD-LIVE  
contents.  
You can reset all settings to the factory presets.  
Item  
Item  
Reset, Not Reset  
Permit: Allows all BD-LIVE discs.  
Limit: Allows only discs with owner certification.  
Prohibit: Prohibits all BD-LIVE discs.  
Netflix Deactivate  
NOTE  
You can deactivate your Netflix information on the  
player.  
• The available functions differ depending on the disc.  
• Regarding playback method of BD-LIVE contents, etc.,  
perform the operations in accordance with the instructions  
in the BD disc manual.  
To enjoy BD-LIVE functions, perform the broadband Internet  
connection (pages 20–21) and communication settings  
(pages 43–46).  
Item  
Yes, No  
DivX Registor  
The DivX registration code is displayed.  
3D mode  
Item  
Yes, No  
This sets output of 3D images.  
To view 3D images, playback of 3D content (3D BD  
video) is necessary with a 3D compatible TV and 3D  
glasses in addition to this player.  
NOTE  
Item  
Auto: Video signals are output as 3D when 3D content  
(3D BD video) is played or as 2D when 2D content is  
played.  
2D: Even if 3D content (3D BD video) is played, video  
signals are output as 2D at all times.  
DivX Deactivate  
You can deactivate your DivX information on the player.  
Item  
Yes, No  
CAUTION  
• When viewing 3D images, viewing for a long period of time  
or lying on your back may cause eye strain and discomfort.  
In addition, 3D images may affect the eyesight of young  
children/infants, so keep them from viewing the images.  
NOTE  
VUDU Deactivate  
3D Notice  
You can deactivate your VUDU information on the  
player.  
This sets whether or not a notice is displayed (“On” or  
“Off”) on the connected TV every time 3D content (3D  
BD video) is played.  
Item  
Yes, No  
Item  
On, Off  
42  
SETTINGS  
5
Press a/b to select “Change”, then press  
ENTER.  
Communication Setup  
This allows you to perform and/or change the  
communication settings and select the type of Internet  
connection from Cable or Wireless (built-in). This  
setting is required to use BD-LIVE functions, video  
streaming services and software updates that connect  
to the Internet.  
Current Ethernet setup info.  
IP Address : Auto Setup  
Netmask : Auto Setup  
Gateway  
DNS  
: Auto Setup  
: Auto Setup  
NOTE  
Change  
Initialize  
• Make sure that the LAN cable is connected to this player  
if a wired Internet connection is made. Make sure that the  
wireless router/access point is connected to the Internet if  
a wireless Internet connection is made. (See pages 20–21.)  
• For manually performing the setting, the following  
information of the connected router or modem is required.  
Confirm the information prior to the setting.  
• For initializing the current setting, select “Initialize”,  
then press ENTER.  
6
For setting the IP address, press c/d to select  
Yes” or “No”, then press ENTER.  
− IP address, netmask, gateway, DNS address  
Do you obtain the IP address  
automatically?  
Yes  
No  
IP Address  
Netmask  
Gateway  
Next  
• If selecting “Yes”: The IP address is automatically  
obtained.  
• If selecting “No”: The IP address, netmask and  
gateway are manually entered using the screen for  
inputting characters. (See page 46.)  
Regarding each of the setup values, confirm the  
specifications of your broadband router.  
Sets whether “Cable” or “Wireless”  
is used for the network connection  
1
2
Press HOME to display the menu screen.  
Press a/b to select “Settings”, then press d or  
ENTER.  
7
8
Select “Next”, then press ENTER.  
• If selecting “Yes” in the step 5, go to the step 9.  
3
4
5
Press a/b to select “Communication Setup”,  
then press d or ENTER.  
Enter your DNS address.  
Press a/b to select “Cable/Wireless Select”,  
then press d or ENTER.  
Press a/b to select “Cable” or “Wireless”, then  
press ENTER.  
Enter your DNS address.  
Primary  
• If selecting “Cable”, follow the [When selecting Cable]  
directions below, then go to step 4.  
• If selecting “Wireless”, follow the [When selecting  
Wireless] directions on the next page, then go to step  
4.  
Secondary  
Next  
• The primary and secondary DNS addresses are  
entered using the screen for inputting characters. (See  
page 46.)  
When selecting Cable  
Regarding each of the setup values, confirm the  
specifications of your broadband router.  
1
Press HOME to display the menu screen.  
Press a/b to select “Settings”, then press d or  
ENTER.  
Press a/b to select “Communication Setup”,  
then press d or ENTER.  
Press a/b to select “Ethernet Setup (Cable)”,  
then press d or ENTER.  
2
3
4
9
Select “Next”, then press ENTER.  
(Continued on the next page)  
43  
SETTINGS  
10 For testing the connection to the Internet, after  
confirming the settings, press a/b to select  
Test”, then press ENTER.  
When selecting Wireless  
• “Test” is available only when setting to obtain the IP  
address automatically. Test” cannot be selected if the  
IP address has not been obtained automatically.  
CAUTION  
• When performing the wireless communication setup,  
security information for the wireless router/access point  
(WEP, WPA or WPA2 key) is required. Check your wireless  
router/access points information prior to setup.  
Confirm the current setting.  
IP Address : xxx xxx xxx xxx  
NOTE  
Netmask  
Gateway  
: xxx xxx xxx xxx  
: xxx xxx xxx xxx  
• Before this player can access the Internet wirelessly, setup  
of a wireless router/access point is required.  
DNS Address : xxx xxx xxx xxx  
xxx xxx xxx xxx  
MAC Address : xx xx xx xx xx xx  
1
2
Press HOME to display the menu screen.  
Press a/b to select “Settings”, then press d or  
ENTER.  
Test  
Complete  
3
4
5
Press a/b to select “Communication Setup”,  
• As a result of the test, if the Internet connection fails,  
enter the setup values manually.  
then press d or ENTER.  
Press a/b to select “Ethernet Setup  
(Wireless)”, then press d or ENTER.  
Press a/b to select “Change”, then press  
ENTER.  
11 Press a/b to select “Complete”, then press  
ENTER.  
Current Ethernet setup info.  
MAC Address : xx xx xx xx xx xx  
Access Point : Not Selected  
IP Address : Auto Setup  
Netmask  
Gateway  
DNS  
: Auto Setup  
: Auto Setup  
: Auto Setup  
Change  
Initialize  
• For initializing the current setting, select “Initialize”,  
then press ENTER.  
6
The player scans all of the available access  
points and displays the points with the “Other  
Network” selection bar on the screen.  
• During searching access point(s), “Accessing...”  
appears on the screen.  
• Up to 6 items (5 access points and the “Other  
Network” selection bar) are displayed on the screen.  
• When there are six or more items retrieved, display  
the next screen by selecting “Next”, then pressing  
ENTER. (The “Other Network” selection bar is always  
displayed last.) When no available access points are  
retrieved, only the “Other Network” selection bar is  
displayed on the screen.  
44  
SETTINGS  
12 Select “Next”, then press ENTER.  
7
Press a/b to select “desired access point” or  
“Other Network”, then press ENTER.  
• For access points which are set to hide the SSID  
using the wireless router, select “Other Network” to  
set the access point.  
13 For testing after confirming the settings, select  
Test”, then press ENTER.  
• If the test has failed, an error message appears.  
Retry to perform the settings after checking that the  
connection (page 21) is performed properly.  
Confirm your setting.  
Select the access point.  
XXXXXXXXXXXX  
YYYYYYYYYYYY  
Other Network  
Access Point: XXXXXXXXXXXX  
Security key: XXXXXXXXXXXX  
Test  
• If selecting “desired access point”, go to step 10.  
• If selecting “Other Network”, go to the next step.  
14 Follow steps 6–11 of “When selecting Cable”  
on pages 43–44 to complete the network  
connection settings.  
8
Press ENTER, then enter the access point  
name.  
• The access point name is manually entered using the  
screen for inputting characters. (See page 46.)  
Information on MAC addresses  
Enter the access point name.  
A MAC address is a unique ID number for network  
equipment. A MAC address is necessary for MAC  
address filtering on the wireless router/access  
point.  
Access Point:  
Before the wireless communication setup is  
performed, we recommend writing down the MAC  
address and keeping it in a safe place. (The MAC  
address is displayed on the “Current Ethernet  
setup info.” screen when wireless communication  
is set (See step 5 of page 44).)  
Next  
9
Select “Next”, then press ENTER.  
10 Press a/b to select your appropriate security  
key, then press ENTER.  
• When selecting WPA/WPA2, selectable security keys  
are PSK/TKIP and PSK/AES.  
MAC address  
Select the security key.  
OPEN  
WEP  
WPA-PSK(AES)  
WPA-PSK(TKIP)  
WPA2-PSK(AES)  
WPA2-PSK(TKIP)  
11 Press ENTER, then enter the security key code.  
• Enter the exact same security key which has been set  
in the wireless router.  
• The security key code is manually entered using the  
screen for inputting characters. (See page 46.)  
Enter the security key.  
Security key:  
Next  
45  
SETTINGS  
4
Repeat the step 3 to display all of the desired  
characters/numbers in the input field.  
The operation procedure for  
inputting characters manually  
Example: The screen for inputting numeric characters  
NOTE  
• Numeric characters such as IP address can be entered on  
the input screen either by selecting each of the characters  
in the “Numeric” mode or using the Number buttons on  
the remote control.  
123  
Numeric  
Edit  
1
2
3
4
5
6
7
8
9
0
IP Address  
Netmask  
Gateway  
123  
NOTE  
• Press n RETURN (Del.Char.) to delete a number/  
character you have input.  
Input numbers/characters can also be deleted by pressing  
A (Red).  
To change a number/character you have input, press B  
(Green) (Left) or C (Blue) (Right) to select the number/  
character you want to change, and press n RETURN  
(Del.Char.). Then, press c/d to select a new number/  
character you want to input, and press ENTER.  
1
Press ENTER at the boxes in which characters  
are to be entered, and the input screen will  
appear.  
Numeric  
Edit  
5
Press D (Yellow) (Complete) to fix the numbers  
which have been input.  
1
2
3
4
5
6
7
8
9
0
IP Address  
Netmask  
Gateway  
123  
Selected by  
pressing a/b  
Selected by  
pressing c/d  
2
3
Press a/b to select the desired input mode.  
Press c/d to select a number/character, then  
press ENTER.  
6
Repeat step 1 to 5 to finish inputting all the  
required characters.  
Input character list  
1ABC (Alphabet/  
numeric character)  
Num.  
ABC  
DEF  
GHI  
JKL  
MNO PQRS  
TUV  
DEF  
WXYZ  
Spc.  
Num.  
GHI  
1 2 3 4 5 6 7 8 9 0  
G H I g h i  
ABC  
A B C a b c  
J K L j k l  
D E F d e f  
JKL  
TUV  
MNO  
M N O m n o  
W X Y Z w x y z  
PQRS  
Spc.  
P Q R S p q r s  
(space)  
T U V t u v  
WXYZ  
Numeric  
Sign  
1 2 3 4 5 6 7 8 9 0  
@ . , :  
; _ - \ $ % ! ? & # + * = / | ˜  
“ ‘ ˆ `  
( ) < >  
[ ]{ }  
Spc.  
@ . , :  
& # + *  
( ) < >  
@
&
(
.
,
:
; _ - \  
= / | ˜  
;
_
-
|
\
˜
$ % ! ?  
“ ‘ ˆ `  
$
%
!
?
#
+
*
=
[
/
ˆ
`
)
<
>
[
]{  
}
]
{
}
Spc.  
(space)  
Edit  
Cancel  
Left  
Right  
Complete  
Del.Char.  
*
The same operation as the colored buttons and n RETURN can be performed by selecting  
each of the items and pressing ENTER.  
“Del.Char.” stands for deleting characters.  
46  
SETTINGS  
4
5
Press a/b to select “USB Memory Management”,  
then press d or ENTER.  
• The “USB Memory Management” screen is displayed.  
• “No USB Memory” appears when no USB memory is  
inserted.  
Before using the USB memory device  
CAUTION:  
• Do not remove the USB memory device or unplug  
the AC cord while the operations for “USB Memory  
Management” or “Software Update (Manual Update  
from USB memory device)” are being performed.  
• Do not use a USB extension cable when connecting a  
USB memory device to the USB terminal on the player.  
− Using a USB extension cable may prevent the player  
from performing correctly.  
Press d or ENTER to proceed.  
Erase: Deletes only BD-VIDEO data written on the USB  
memory device such as BD-LIVE data.  
• If you want to delete all of the data or delete only the  
unneeded software update data after the software is  
updated, delete the data on the USB memory device  
using a PC.  
NOTE:  
• SHARP cannot guarantee that all brands’ USB memory  
devices will operate with this player.  
• Only USB memory devices formatted with FAT 32/16  
are compatible.  
6
Press a/b to select “Yes”, then press ENTER.  
\
7
Start the process.  
• The screen for the current operation will display.  
When formatting a USB memory device using a PC,  
perform the following settings.  
Format File System: FAT32  
Allocation Unit Size: Default Allocation Size  
Complete  
OK  
USB Memory Management  
8
Press ENTER.  
The following instructions explain how to delete data  
such as the Virtual Package data and the BD-LIVE  
data in a USB memory device.  
NOTE  
• Data which has been saved to the players internal memory  
(game score, etc.) will also be deleted.  
When you insert or remove a USB memory device, be  
sure to turn the main power off.  
1
Insert the USB memory device into the USB  
terminal on this player.  
USB memory  
device  
2
3
Press HOME to display the menu screen.  
Press a/b to select “Settings”, then press d or  
ENTER.  
47  
SETTINGS  
6
During access to the network and checking the  
latest version of firmware, “Accessing” blinks.  
• The current version of this unit software and the latest  
version of the update file on the network are displayed  
when latest version of firmware has been found.  
To update this player software with update file, select  
Yes”, and go to step 7.  
Software Update Settings  
In this player, the software version can be updated  
using either one of the following methods.  
• Manual Update from Network  
• Manual Update from USB memory device  
Latest version of firmware has been found.  
Firmware update is available.  
Proceed with update?  
Manual Update from Network  
This function allows you to perform the update  
operation by accessing an Internet connection  
manually to check if there is a new firmware version.  
Current Version :  
Latest Version :  
xxxxxxxxxx  
yyyyyyyyyy  
If “Yes” will be selected, version update will start.  
NOTE  
Yes  
No  
• Make sure that the LAN cable is connected to this player  
if a wired Internet connection is made. Make sure that the  
wireless router/access point is connected to the Internet if  
a wireless Internet connection is made. (See pages 20–21.)  
• Make sure to perform the communication settings. (See  
pages 43–46.)  
• If the firmware has already been updated to the latest  
version, the following message appears.  
Present version of firmware is latest version.  
You do not need to update.  
• It may take time to access and download the update  
depending on the Internet connection and other factors.  
Version :  
xxxxxxxxxx  
OK  
CAUTION  
• While downloading or updating the software, do not  
remove the LAN cable when it is used for the Internet  
connection, do not unplug the AC cord, do not remove any  
cables from the router/access point and do not turn off the  
router/access point.  
If the Internet connection has failed, an error message  
appears.  
Retry the update after checking if the broadband  
Internet connection (pages 20–21) and communication  
settings (pages 43–46) are performed properly.  
7
Press ENTER to start updating.  
Downloading latest firmware…  
Version : yyyyyyyyyy  
30%  
8
9
When the software is successfully updated, a  
screen is displayed indicating that the update  
process is completed.  
• If the update has failed, an error message appears.  
Retry the update after checking if the broadband  
Internet connection (pages 20–21) and communication  
settings (pages 43–46) are performed properly.  
1
2
Press HOME to display the menu screen.  
Press a/b to select “Settings”, then press d or  
ENTER.  
Press POWER to turn off the player.  
3
4
5
Press a/b to select “Software Update  
Settings”, then press d or ENTER.  
Press d or ENTER to move to the menu to the  
right.  
Press a/b to select “Network”, then press  
ENTER.  
48  
SETTINGS  
CAUTION  
Manual Update from USB memory  
device  
• Do not remove the USB memory device or unplug the AC  
cord while the software is being updated.  
This function allows software updates by inserting a  
USB memory device with the update file into the USB  
terminal on this player.  
• When a software update is performed, the software update  
data must be written onto the USB memory device in  
advance using a PC.  
When you insert a USB memory device, be sure to  
turn the main power off.  
1
Insert the USB memory device with the update  
file into the USB terminal on this player.  
• The USB memory device must be clear of all files except  
software update data to allow new software uploading.  
To check for the availability of a software update,  
you have any questions, please call 1-800-BE-  
SHARP (800-237-4277).  
USB memory  
device  
• When software update data is released, copy the data onto  
a USB memory device after downloading it to a PC.  
• For methods such as downloading and copying to a USB  
memory device, carefully read the description shown on  
the website before performing the operation.  
2
Press POWER to turn on the power.  
• The screen shown in part 2 of step 9 will be  
automatically displayed. (Go to part 2 of step 9.)  
• If “No” is selected in part 2 of step 9 and wish to  
update the software manually, perform the operations  
from step 3.  
NOTE  
• Only USB memory devices formatted with FAT 32/16 are  
compatible.  
3
4
Press HOME to display the menu screen.  
Press a/b to select “Settings”, then press d or  
ENTER.  
Press a/b to select “Software Update  
Settings”, then press d or ENTER.  
Press d or ENTER to move to the menu to the  
right.  
When formatting a USB memory device using a PC,  
perform the following settings.  
Format File System: FAT32  
Allocation Unit Size: Default Allocation Size  
• Do not extract the firmware update file to any folders other  
than the root directory on the USB memory device. The  
firmware update file must be only one file directly in the root  
directory.  
5
6
7
Press a/b to select “USB Memory”, then press  
ENTER.  
• If you have not yet set the password, go to step 8.  
8
Press ENTER to start checking data in the USB  
memory device.  
Insert USB memory device containing  
the software update file.  
OK  
9
1 During the data checking, “Checking” blinks.  
Now checking the data in USB memory device.  
Checking  
(Continued on the next page)  
49  
SETTINGS  
2 The current version of this unit software and the  
11 When the software is successfully updated, a  
screen is displayed indicating that the update  
process is completed.  
version of the update file on the USB memory device  
are displayed. To update this player software with  
update file, select “Yes”, and press ENTER.  
• If the update has failed, check the file in the USB  
device and try Software Update again.  
Software update file is detected in the USB memory device.  
Start update?  
12 Remove the USB memory device.  
13 Press POWER to turn off the player.  
• Delete unneeded software update data using a PC  
after the software update process is completed.  
Current Ver. :  
Update Ver. :  
xxxxxxxxxx  
yyyyyyyyyy  
Yes  
No  
3 If the USB memory device is not properly installed or  
the correct update file cannot be found on the USB  
memory device, an error message is displayed.  
Check the file on the USB memory device, and then  
reinsert the USB memory device correctly.  
Software update file is not detected in the USB memory device.  
Confirm that you have transferred the file  
to the USB memory device and retry software update.  
Confirm that you have inserted the USB memory device  
into the correct device.  
OK  
There is more than one software file  
in the USB memory device.  
Confirm that only the software update file is  
in the USB memory device.  
OK  
10 Press ENTER to start updating.  
• The screen becomes dark for a while until the update  
screen can be displayed. Please wait for the update  
screen to appear. Do not unplug the AC cord.  
The picture will temporarily go dark until  
the software update display appears.  
Wait several minutes and do not unplug the AC cord.  
OK  
Now updating  
Do not unplug AC cord.  
Update Version  
*
yyyyyyyyyy  
30%  
50  
SETTINGS  
Digital Audio Output Selection Formats  
Audio Stream  
Output  
terminal  
Setup  
Definition  
Dolby  
Digital  
Plus  
Dolby  
Digital  
Dolby  
TrueHD  
DTS-HD DTS-HD  
PCM  
DTS  
HR  
MA  
PCM  
7.1ch  
PCM  
7.1ch  
HDMI OUT  
OPTICAL  
PCM  
PCM  
PCM  
PCM  
PCM  
PCM  
Decodes Primary, Secondary  
and Effect audio streams  
together into PCM audio.  
PCM  
PCM 2ch PCM 2ch PCM 2ch PCM 2ch  
PCM 2ch PCM 2ch  
Decodes Primary, Secondary  
and Effect audio streams  
together into PCM audio, then  
re-encodes the PCM audio  
into DTS bitstream.  
Bitstream  
(Mix)  
HDMI OUT/  
OPTICAL  
DTS  
5.1ch  
DTS  
5.1ch  
DTS  
DTS  
DTS  
DTS  
DTS  
Dolby  
Digital  
Plus  
Outputs only the Primary  
audio soundtrack (main  
soundtrack of the movie) so  
Dolby  
Digital  
Dolby  
TrueHD  
DTS-HD  
HR  
DTS-HD  
MA  
HDMI OUT  
OPTICAL  
PCM  
DTS  
DTS  
Bitstream that your audio equipment  
can decode the audio  
Dolby  
Digital  
Dolby  
Digital  
Dolby  
Digital  
DTS-ES  
5.1ch  
DTS-ES  
5.1ch  
PCM 2ch  
bitstream. You will not hear  
Secondary and Effect audio.  
Blu-ray discs may include three audio streams.  
• Primary Audio: The audio soundtrack of the main feature  
• Secondary Audio: Additional soundtrack such as director or actors commentary.  
• Interactive Audio: Interactive sounds will be heard when selected.  
Interactive Audio is different on each Blu-ray Disc.  
NOTE  
• Digital audio cannot be copied from the OPTICAL DIGITAL AUDIO OUT terminal.  
51  
Streaming content  
Playing back streaming content  
4
Read the Disclaimer displayed on the screen. If  
Instantly Watching Movies from Netflix  
you agree, press a on the last page to select  
“Agree”, then press ENTER.  
(If you do not agree, this service cannot be  
used.)  
Please check that the most current software is  
loaded on this player by using the software update  
sharpusa.com/products/support/ to check for a  
download of the newest software version.  
5
Obtain the Netflix activation code.  
If you don’t have a Netflix account  
1 Press a/b to select “no-start my FREE trial”,  
This function allows you to enjoy Netflix through the  
Internet.  
Netflix is an online DVD and Blu-ray Disc rental service,  
offering rental-by mail and streaming instantly to Netflix  
unlimited members.  
then press ENTER.  
The screen of this player shown on the TV  
To enjoy this function, make a broadband Internet  
connection to both your PC and this player (See pages  
20–21), and then set communication settings (See pages  
43–46), then perform the following operation.  
• Before using this function, please read “Network Service  
Disclaimer” (page x).  
NOTE  
• Disc playback and this function cannot be used at the  
same time.  
• As the registration process takes time, we recommend  
setting “Auto Power Off” to “No” before starting the  
registration. (See page 41.)  
2
from your PC.  
• The streaming quality (SD or HD) depends on the network  
speed and original bit rate of the title.  
com/help or login to your Netflix account and click “Help”  
at the top of the page.  
3 Press a/b to select “I’m now a member”, then  
press ENTER.  
The screen of this player shown on the TV  
• Netflix is only available in the US.  
• Illustrations are examples and may differ from the actual  
Netflix screens.  
The buttons which can be used :  
a/b/c/d / ENTER / d PLAY / F PAUSE /  
H STOP / G REV / J FWD / EXIT  
Settings for watching Netflix content on  
your TV  
If you have a Netflix account  
1
Press HOME to display the menu screen.  
• The same operation can be performed by pressing  
ENTER after selecting the HOME icon on the Wall  
Paper screen.  
Press a/b to select “yes-activate instant  
streaming from Netflix”, then press ENTER.  
The screen of this player shown on the TV  
2
Press a/b to select “e-Contents”, then press  
d or ENTER.  
The screen of this player shown on the TV  
Movie  
Picture  
Music  
e-Contents  
Settings  
3
Press a/b to select “Netflix”, then press d or  
ENTER.  
52  
Playing back streaming content  
6
You will see the following window.  
10 Press c/d to select the desired title, then press  
• The activation code is displayed.  
ENTER.  
The screen of this player shown on the TV  
11 The title you selected is displayed.  
To return to the step 10, press a.  
Press a/b to select “play”, then press ENTER  
or d PLAY to start playback.  
The screen of this player shown on the TV  
7
and then enter the activation code displayed in step  
6.  
The screen of the PC  
The screen of this player shown on the TV  
• After a period of time, the player will be activated, and  
the empty instant Queue screen will be displayed on  
your TV from the player.  
Adding content to the Instant Queue  
8
To add a movie to the instant Queue of this  
player, select the “Add to Instant” button on  
Netflix “Watch Instantly” web page using your  
PC.  
• After a period of time, the instant Queue registered  
using your PC will appear on your TV screen.  
• After a period of time, playback of the movie begins.  
12 To pause the playback at any time, press  
F PAUSE.  
• Press F PAUSE or d PLAY to return to playback.  
13 To stop the playback or go to step 11, press a  
or H STOP.  
Playing back content on your TV  
14 Press EXIT to exit.  
9
The title selection screen in the Instant Queue is  
displayed.  
• Once this function is set and the registration is  
completed, the next time this service is used instant  
Queue screens such as the following can be displayed  
directly by pressing ENTER after selecting the  
NETFLIX icon on the Wall Paper screen.  
Fast Forward/Reverse  
The Fast Forward/Reverse function is enabled when  
G REV or J FWD is pressed during playback.  
The screen of this player shown on the TV  
• When you want to display movies by genre, press a,  
select the desired genre by pressing c/d, then press  
ENTER. The title selection screen for the selected  
genre will be displayed.  
53  
Playing back streaming content  
Enjoying Movies and Internet  
Application with VUDU  
You can enjoy moves and Internet applications with  
VUDU.  
VUDU Movies is the leading HD on-demand video  
service. VUDU Movies is built into your BD Player and  
utilizes your existing Internet connection to deliver the  
highest quality on-demand video available today.  
Example  
Getting Started  
1
2
Press HOME to display the menu screen.  
Press a/b to select “e-Contents”, then press  
d or ENTER.  
VUDU Movies features:  
True 1080p HD, the only service to offer 1080p quality  
video on-demand  
• Over 16,000 titles available on-demand  
• Over 3,000 titles available in HD, more than are available  
anywhere else  
• 5.1 surround sound, delivered through state-of-the-art  
Dolby Digital Plus  
• The latest Hollywood hits available the same day as DVD  
• No subscription fees required  
3
Press a/b to select “Vudu”, then press d or  
ENTER.  
• The VUDU application screen is displayed.  
• The same operation can be performed by pressing  
ENTER after selecting the VUDU icon on the Wall  
Paper screen.  
You can also display the VUDU application screen by  
pressing VUDU.  
4
Press a/b/c/d to select the desired item, and  
then press ENTER.  
• Follow the instructions on the screen.  
NOTE  
To enjoy this function, make a broadband Internet  
connection to both your PC and the BD player (See pages  
20–21), and then set Communication Setup (see pages  
43–46), then perform the “Getting Started” operation to  
the right.  
Watching a Movie on VUDU  
When it comes time to watch a movie on VUDU, you  
will need to set up an account.  
1
• Before using this function, please read “Network Service  
Disclaimer” (page x).  
• For more information on VUDU, visit http://www.VUDU.  
com.  
Your Internet connection is vital to your VUDU experience.  
Please refer to the chart below for minimum bandwidth  
requirements:  
SD (DVD quality): 480p 1 Mbps to 2 Mbps  
HD (HDTV quality): 720p 2.25 Mbps to 4.5 Mbps  
HDX (BD quality): 1080p 4.5 Mbps to 9 Mbps  
• VUDU Movies is only available in the U.S.  
• Illustrations are examples and may differ from the actual  
VUDU screens.  
Press a/b/c/d to select “Sign up for VUDU  
now! Click here to get started”, and then press  
ENTER.  
Press c/d to select “SIGN up now”, and then  
press ENTER.  
2
3
Enter your e-mail address.  
• An activation e-mail will be sent to your PC. Click on  
the link to complete the activation process.  
• Following the instructions on the screen, make all the  
necessary settings.  
• Disc playback and this function cannot be used at the  
same time.  
54  
Playing back streaming content  
If the Settings on the PC Are Incorrect  
The screen as shown below will be displayed.  
Following the instructions on the screen, send e-mail  
again and make all the necessary settings.  
Troubleshooting - VUDU  
VUDU cannot be accessed.  
• If you are not able to access other network service (e.g.  
BD-LIVE) from your device, but are not able to access  
VUDU, please contact VUDU Customer Care at 1-888-  
554-VUDU (8838).  
Example  
• If you are not able to access any network service (e.g.  
BD-LIVE) from your device, please contact your device  
manufacture for assistance.  
The activation e-mail was not obtained.  
• Check your junk or spam e-mail folders. If you are unable  
to find the activation e-mail in the folders, reconfirm the e-  
mail address you have entered, and then try your account  
settings again.  
If you encounter any other issues during activation,  
refer to the following online resources:  
Detailed VUDU Manual: Available at  
aspects of the revolutionary VUDU service with easy-to-  
follow instructions.  
Operational buttons during playback  
Description  
Hold down to go in reverse.  
Starts playback.  
Buttons  
S
d
VUDU FAQ: To learn more about VUDU, visit the  
Frequently Asked Questions at  
Hold down to fast forward.  
Playback stops.  
V
H
VUDU Customer Care: When you need to talk live with  
someone, contact VUDU Customer Care at 1-888-554-  
VUDU (8838) 7 a.m. to 8 p.m. Pacific, 7 days a week  
(except holidays).  
Sets pauses and still pictures.  
F
Pressing quickly once takes you to the start  
of the chapter currently playing. Each time  
you press it, you move back to the start of  
the previous chapter.  
T
U
Pressing quickly once takes you to the start  
of the next chapter. Each time you press  
it, you move ahead to the start of the next  
chapter.  
Deactivating the VUDU Function  
You can deactivate streaming from VUDU to your  
player using “VUDU Deactivate” in the “Settings” menu  
(See page 42).  
55  
Playing back streaming content  
Enjoying Pandora radio  
6
7
8
Using your PC, visit website address you have  
noted in step 5.  
Complete the Pandora registration process with  
the activation code you have noted in step 5.  
You can instantly listen to personalized radio stations,  
streamed over the Internet, from Pandora via this  
player.  
To enjoy this function, make a broadband Internet  
connection to both your PC and this player (See pages  
20–21), and then set communication settings (See pages  
43–46), then perform the following operation.  
• Before using this function, please read “Network Service  
Disclaimer” (page x).  
On your player, press ENTER to complete the  
activation.  
NOTE  
• For questions regarding the Pandora service, please visit  
e-mail: [email protected].  
NOTE  
• Disc playback and this function cannot be used at the  
same time.  
• Pandora Radio is only available in the U.S.  
Activating your player  
Before using the Pandora streaming service via the  
Internet, you are required to activate your player.  
1
2
Press HOME to display the menu screen.  
Press a/b to select “e-Contents”, then press  
d or ENTER.  
3
Press a/b to select “Pandora”, then press d  
or ENTER.  
• The same operation can be performed by pressing  
ENTER after selecting the Pandora icon on the Wall  
Paper screen.  
4
If you don’t have a Pandora account, you will  
need to create one. Select “No” by pressing  
c/d, then press ENTER.  
If you have a Pandora account, select “Yes”,  
then press ENTER. Enter your e-mail and  
password to sign in your account.  
5
The activation code number appears. Make  
sure to note the activation code number and the  
website address.  
56  
Appendix  
Troubleshooting  
The following problems do not always suggest a defect or malfunction of this Player.  
Refer to the problems and lists of possible solutions below before calling for service.  
Power  
Problem  
Possible causes and solutions  
The Player power cannot be turned  
on.  
• Make sure that the AC adapter cord is connected to the DC IN terminal on the  
rear of the player, the AC cord is connected to the AC adapter and the AC cord is  
plugged into an AC outlet. (Page 23)  
• Reset the player. (Page iii)  
The Player power is turned off.  
• Is “Auto Power Off” set to “Yes”? When “Auto Power Off” is set to “Yes”, the  
power will be automatically turned off after 10 continuous minutes of inactivity (no  
playback). (Page 41)  
Basic Operation  
Problem  
Possible causes and solutions  
The remote control does not work.  
• Use the remote control within its operating range. (Page 22)  
• Replace the batteries. (Page 22)  
• Reset the remote control.  
− Press and hold 1 (the number button) first and then POWER on the remote  
control together for more than 5 seconds.  
Cannot operate the Player.  
• Are you operating the Player within the specified operating temperature range?  
(Page v)  
Playback  
Problem  
Possible causes and solutions  
The Player cannot play a disc.  
Take out the disc and clean it. (Page 12)  
• Make sure that the disc is loaded properly (label-side up). (Page 27)  
• Make sure that region code on the disc matches that of this Player. (Page 9)  
• Allow any condensation in or near the Player to dry. (Page 12)  
• Check that the disc is recorded in the compatible TV system (PAL or NTSC).  
• The Player cannot play back video which was not recorded normally. (Page 9)  
• Proper playback may be impossible due to the state of the disc recording, a  
scratched, warped or dirty disc, the state of the pick-up, or compatibility issues  
between this Player and the disc being used. (Pages 9, 12)  
• When the recorded time of a disc is unusually short, playback may not be possible.  
• BD-RE/R discs recorded in a format other than BDMV/BDAV cannot be played  
back. (Page 9)  
The disc is automatically ejected  
after loading a disc.  
• Make sure that the disc is loaded properly (label-side up). (Page 27)  
Take out the disc and clean it. (Page 12)  
• Make sure that the disc is playable. (Page 9)  
Video stops.  
• Has the Player been subjected to shock or impact? Are you using it in an unstable  
location? The Player will stop if it senses shock or vibration.  
The Player makes a snapping sound • The player may sometimes make a snapping sound when starting playback if it has  
when starting playback or loading  
a disc.  
not been operated in a while. These sounds are not malfunctions of the player but  
are normal operating conditions.  
(Continued on the next page)  
i
Troubleshooting  
Picture  
Problem  
Possible causes and solutions  
No picture.  
• Make sure that the cables are connected correctly. (Page 18)  
• Make sure that the connected TV or the AV receiver is set to the correct input.  
(Page 18)  
Take out the disc and clean it. (Page 12)  
• Make sure that region code on the disc matches that of this Player. (Page 9)  
• There is no picture from the HDMI output.  
− Are the settings performed correctly? Please check the settings. (Page 40)  
Screen freezes and operation  
buttons do not work.  
Turn off the power and turn on the power again.  
• If the power is not turned off, perform a reset. (Page iii)  
• Is the disc damaged or dirty? Check the condition of the disc. (Page 12)  
Widescreen video appears vertically  
stretched, or black bands appear at  
the top and bottom of the screen.  
• Is “TV Aspect Ratio” set to match the connected TV? (Page 40)  
• If you are using a widescreen TV, is the “TV Aspect Ratio” set to “Wide”? (Page 40)  
Square noise (mosaic) appears on  
the screen.  
• Blocks in images may be visible in scenes with rapid movement due to the  
characteristics of digital image compression technology.  
Audio is not output, or images are  
not played back properly.  
• The audio may not be output or the images may not be played back properly for  
some discs in which copyright-protected contents are recorded.  
3D images cannot be output to a TV. Is an HDMI cable used?  
• Are a 3D compatible TV and 3D glasses used?  
• Is a proper connection made between the HDMI OUT terminal of the player and the  
HDMI input terminal of the 3D compatible TV?  
• Is the 3D setting on this player correct? (Pages 25, 42)  
• Is the 3D setting on the TV correct?  
• Is a 3D compatible BD disc being played back?  
Noise appears on the screen.  
• When you watch TV broadcasts with the power of this player turned on, noise may  
appear on the TV screen. In such cases, turn off the power to this player or keep  
this player away from the TV.  
Sound  
Problem  
Possible causes and solutions  
No sound, or sound is distorted.  
• If the volume of the TV or amplifier is set to minimum, turn the volume up.  
• There is no sound during still mode, slow motion playback, fast forward and fast  
reverse. (Page 34)  
• Check that the audio cable is connected correctly. (Page 19)  
• Check that the cable plugs are clean.  
Take out the disc and clean it. (Page 12)  
• Audio may not be output depending on the audio recording status, such as when  
audio other than an audio signal or non-standard audio is recorded for the audio  
content of the disc. (Page 9)  
Audio is not output, or images are  
not played back properly.  
• The audio may not be output or the images may not be played back properly for  
some discs in which copyright-protected contents are recorded.  
ii  
Troubleshooting  
Network  
Problem  
Possible causes and solutions  
Cannot connect to the Internet.  
When the wired Internet connection is made  
• Is the LAN cable connected properly?  
• Is the wrong cable such as a modular cable used? Connect a LAN cable to the  
ETHERNET terminal. (Page 20)  
• Is the power for the connected equipment, such as a broadband router or modem  
turned on?  
• Is the broadband router and/or modem properly connected?  
• Is the proper value(s) set in the network setting? Check “Communication Setup”.  
(Pages 43–45)  
When the wireless Internet connection is made  
• Is the power for the connected equipment, such as a wireless router or access point  
turned on?  
• Is the wireless router or access point properly connected?  
• Are there any obstacles, such as physical structures (brick and concrete walls, etc.)  
and electronics (microwave, etc.) between the wireless router/access point and the  
player? As this may cause interference with the wireless signal, make sure to keep  
obstacles away.  
• Is the proper value(s) set in the network setting? Check “Communication Setup”.  
(Pages 43–45)  
Cannot download BD-LIVE contents. • Make sure that this player is connected to the Internet.  
• Is the USB memory device properly connected? Check that the USB memory  
device is connected to the USB terminal of this Player.  
• Check if the BD disc supports BD-LIVE.  
• Check the setting for “BD Internet Access”. (Page 42)  
Other  
Problem  
Possible causes and solutions  
The TV operates incorrectly.  
The Player heats up during use.  
POWER indicator will remain lit.  
• Some TVs with wireless remote control capability may operate incorrectly when  
using the remote control of this Player. Use such TVs away from this Player.  
• When using this Player, the console cabinet may heat up depending on the usage  
environment. This is not a malfunction.  
• When the AC cord is removed from the outlet, the POWER indicator will remain lit  
for a short period. This is normal and is not a malfunction.  
POWER indicator  
To Reset this Player  
• If this Player receives strong interference from a source such as excessive static electricity,  
strong external noise, malfunction of power supply, or voltage caused by lightning during  
use or a wrong operation is sent to the Player, errors like the Player not accepting an  
operation may occur.  
Press and hold POWER on the Player until the POWER indicator disappears.  
POWER  
• When a reset is performed while the power is on, the Player will turn off. Turn the power on again. At this point, it may take  
a few moments for the system processing to finish before the Player is ready for use. During the system processing, the BD/  
DVD/CD mode indicator on the Player will blink. Once the system processing has finished, the indicator will finish blinking and  
then light up normally. You can operate the Player when the BD/DVD/CD mode indicator is lit.  
• Since all settings including the language setting stored in memory are also reset when a reset has been performed, they must  
be set again.  
• When the problem persists even after performing a reset, unplug the AC cord and plug it in again. If this does not solve the  
problem, contact the nearest service center approved by SHARP.  
iii  
On-screen Error Messages  
The following messages appear on the TV screen in case of an error during operation.  
Error message  
Cannot play.  
Possible Error  
Suggested Solution  
• The disc cannot be played back with  
this Player.  
• Check the disc, and load it correctly.  
Incompatible disc.  
• If you load a disc which cannot be  
played with this Player (i.e. a scratched  
disc), or if you load a disc upside down,  
this message will appear, and the disc  
will automatically pop out.  
• Occurs if the loaded disc cannot be  
played because it is a non-standard disc  
or scratched, etc.  
• Remove the disc.  
Cannot operate.  
• Occurs if an operation is incorrect.  
• Occurs if there is a formatting error.  
This USB memory is not formatted  
• Format the USB memory again.  
• Format the USB memory with your  
PC.  
properly. Please format the memory in • Occurs if the USB memory is not  
USB memory management.  
formatted with FAT 32/16.  
The Connected USB Memory cannot  
be used. It should be compliant with  
USB 2.0  
• Occurs if USB memory not compliant  
with USB 2.0 High Speed (480Mbit/s) is  
used (i.e. USB 1.0/USB 1.1).  
• Connect USB 2.0 High Speed  
(480Mbit/s) compliant USB memory.  
iv  
Specifications  
Specifications are subject to change without notice.  
General  
Power requirements  
DC 12V (with the supplied AC adapter)  
Power consumption (Normal)  
Power consumption (Standby)  
Dimensions  
16 W (with the supplied AC adapter at AC 120V, 60 HZ)  
0.4 W (with the supplied AC adapter at AC 120V, 60 HZ)  
Approx. 17 g 2 1/2 g 8 5/8 inch (W g H g D)  
Approx. 430 mm g 36 mm g 218 mm (W g H g D)  
Weight  
Approx. 5.1 lbs. (2.3 kg)  
41°F to 95°F (5°C to 35°C)  
–4°F to 140°F (–20°C to 60°C)  
10 % to 80 % (no condensation)  
NTSC system  
Operating temperature  
Storage temperature  
Operating humidity  
TV systems  
Playback  
Playable discs  
BD-ROM, BD-RE, BD-R,  
DVD Video, DVD+RW/+R/-RW/-R (Video/VR/AVCHD/JPEG file/MP3 file/DivX format),  
Audio CD (CD-DA), CD-RW/R (CD-DA/JPEG file/MP3 file/DivX format)  
Region code  
A or ALL for BD, 1 or ALL for DVD  
Input/Output  
HDMI  
HDMI 19-pin standard connector (1080p 24Hz output)  
HDMI® (Deep Color, x.v.Color, Dolby TrueHD, DTS-HD Master Audio | Essential)  
Digital audio optical output  
USB input  
Terminal: Square Optical terminal  
USB 2.0 High Speed (480Mbit/s) correspondence (for Local storage/Software  
update/JPEG, MP3 and DivX playback)  
ETHERNET  
10BASE-T/100BASE-TX  
AC Adapter  
Power requirements  
Rated output  
AC 100–240V, 50/60Hz  
DC 12V, 5A  
(Continued on the next page)  
v
Specifications  
Wireless LAN (Internal antenna)  
Frequency band  
Draft 802.11n Radio: 2.4GHz  
802.11g Radio: 2.4GHz  
802.11b Radio: 2.4GHz  
2.412 – 2.462GHz (channel 1–11)  
Modulation  
DBPSK @ 1Mbps  
DQPSK@ 2Mbp  
CCK@ 5.5/11 Mbps  
BPSK@ 6/9 Mbps  
QPSK@ 12/18Mbps  
16-QAM@ 24/36 Mbps  
64-QAM@ 48/54 Mpb and above, Rx up to 300Mbps  
Transport power and  
sensitivity  
Tx output power:  
(Typical)  
11b 16.5 +/- 1 dBm  
11g 16 +/- 1 dBm@54Mbps  
11n 15 +/- 1 dBm  
Rx sensitivity: (Typical) -84 dBm @11 Mbps  
-72 dBm @54 Mbps  
-64 dBm @64-QAM, 20MHz channel spacing  
-61 dBm @64-QAM, 40MHz channel spacing  
Security  
AP (Infrastructure) mode supports  
- Static WEP that support both 64 and 128 bit keys.  
- WPA(TKIP) with PSK  
Ad-hoc mode supports  
- None (plaintext)  
- Static WEP that supports both 64 and 128 bit keys.  
vi  
Glossary  
Ad-hoc mode (page 21)  
Chapter number (pages 37, 38)  
Sections of a movie or a music feature that are smaller  
than titles. A title is composed of several chapters.  
Some discs may only be comprised of a single  
chapter.  
Ad-hoc mode is a wireless LAN communication  
format. This performs direct communication between  
equipment without an access point. (Ad-hoc mode is  
not supported.)  
AVCHD (page 9)  
Control Panel (page 26)  
AVCHD (Advanced Video Codec High Definition) refers  
to a recording format (specification) for digital video  
cameras which can record to a disc such as 8 cm  
DVD disc and play back digital high definition images.  
This function allows you to operate this player using  
the TV remote control by displaying the control panel  
on the TV screen.  
Copy guard  
BDAV (page 9)  
This function prevents copying. You cannot copy discs  
marked by the copyright holder with a signal which  
prevents copying.  
BDAV (Blu-ray Disc Audio/Visual, BD-AV) refers to one  
of the application formats used for writable Blu-ray  
discs such as BD-R, BD-RE, etc. BDAV is a recording  
format equivalent to DVD-VR (VR mode) of the DVD  
specifications.  
Deep Color  
Deep Color can reproduce rich colors, increasing the  
number of bits describing colors.  
BD-J application  
This Player is compatible with Deep Color. You can  
enjoy this function by connecting to a Deep Color  
compatible TV using an HDMI cable.  
The BD-ROM format supports Java for interactive  
functions. “BD-J” offers content providers almost  
unlimited functionality when creating interactive BD-  
ROM titles.  
Disc menu (page 28)  
This lets you select things like the subtitle language or  
audio format using a menu stored on the DVD video  
disc.  
BD-LIVE (page 29)  
A variety of interactive content is available from BD-  
LIVE compatible Blu-ray discs via the Internet.  
Dolby Digital  
BDMV (page 9)  
A sound system developed by Dolby Laboratories Inc.  
that gives movie theater ambience to audio output  
when the product is connected to a Dolby Digital  
processor or amplifier.  
BDMV (Blu-ray Disc Movie, BD-MV) refers to one  
of the application formats used for BD-ROM which  
is one of the Blu-ray Disc specifications. BDMV is a  
recording format equivalent to DVD-video of the DVD  
specification.  
Dolby Digital Plus  
A sound system developed as an extension to Dolby  
Digital. This audio coding technology supports 7.1  
multi-channel surround sound.  
BD-R (pages 9, 27)  
A BD-R (Blu-ray Disc Recordable) is a recordable,  
write-once Blu-ray Disc. Since contents can be  
recorded and cannot be overwritten, a BD-R can be  
used to archive data or for storing and distributing  
video material.  
Dolby TrueHD  
Dolby TrueHD is a lossless coding technology that  
supports up to 8 channels of multi-channel surround  
sound for the next generation optical discs. The  
reproduced sound is true to the original source bit-for-  
bit.  
BD-RE (pages 9, 27)  
A BD-RE (Blu-ray Disc Rewritable) is a recordable and  
rewritable Blu-ray Disc.  
DTS  
BD-ROM  
This is a digital sound system developed by DTS, Inc.  
for use in cinemas.  
BD-ROMs (Blu-ray Disc Read-Only Memory) are  
commercially produced discs. Other than conventional  
movie and video contents, these discs have enhanced  
features such as interactive content, menu operations  
using pop-up menus, selection of subtitle display, and  
slide shows. Although a BD-ROM may contain any  
form of data, most BD-ROM discs will contain movies  
in High Definition format for playback on Blu-ray Disc  
players.  
DTS-HD High Resolution Audio  
DTS-HD High Resolution Audio is a new technology  
developed for the next generation high definition  
optical disc format.  
DTS-HD Master Audio  
DTS-HD Master Audio is a lossless audio compression  
technology developed for the next generation high  
definition optical disc format.  
Blu-ray Disc (BD) (page 9)  
A disc format developed for recording/playing high-  
definition (HD) video (for HDTV, etc.), and for storing  
large amounts of data. A single layer Blu-ray Disc  
holds up to 25 GB, and a dual-layer Blu-ray Disc holds  
up to 50 GB of data.  
(Continued on the next page)  
vii  
Glossary  
DTS-HD Master Audio | Essential  
DTS-HD Master Audio | Essential is a lossless audio  
compression technology developed for the next  
generation high definition optical disc format.  
JPEG (pages 9, 10, 33)  
JPEG (Joint Photographic Experts Group) is a still  
image data compression format and is used in most of  
digital cameras.  
DVD upscaling (page 27)  
Letter Box (LB 4:3) (page 40)  
Upscaling (upconverting) refers to a function of various  
players and devices that enlarge the image size to fit the  
size of the screen of video equipments such as a TV.  
A screen size with black bars on the top and bottom  
of the image to allow viewing of wide-screen (16:9)  
material on a connected 4:3 TV.  
DVD video (pages 9, 27)  
Linear PCM Sound  
A disc format that contains up to eight hours of moving  
pictures on a disc the same diameter as a CD. A single-  
layer single sided DVD holds up to 4.7 GB; a double  
layer single-sided DVD, 8.5 GB; a single layer double-  
sided DVD, 9.4 GB; double-layer double-sided DVD, 17  
GB. The MPEG 2 format was adopted for efficient video  
data compression. It is a variable rate technology that  
encodes the data to according to the status of the video  
for reproducing high-quality images. Audio information  
is recorded in a multi-channel format such as Dolby  
Digital, allowing for a realistic audio presence.  
Linear PCM is a signal recording format used for Audio  
CDs and on some DVD and Blu-ray discs. The sound  
on Audio CDs is recorded at 44.1 kHz with 16 bits.  
(Sound is recorded between 48 kHz with 16 bits and  
96 kHz with 24 bits on DVD video discs and between  
48 kHz with 16 bits and 192 kHz with 24 bits on BD  
video discs.)  
MP3 (pages 9, 10, 32)  
MP3 files are audio data compressed in the MPEG1/2  
Audio layer-3 file format. “MP3 files” have “.mp3” as  
extensions.  
DVD+/-R (pages 9, 27)  
MPEG-2  
A DVD+/-R is a recordable, write-once DVD. Since  
contents can be recorded and cannot be overwritten,  
a DVD+/-R can be used to archive data or for storing  
and distributing video material. The DVD+/-R has  
two different formats: VR format and Video format.  
DVDs created in Video format have the same format  
as a DVD video, while discs created in VR (Video  
Recording) format allow the contents to be programed  
or edited.  
MPEG-2 (Moving Picture Experts Group phase 2) is  
one of the video data compression schemes, which  
is adopted for DVD videos and digital broadcasts  
worldwide. Some Blu-ray Discs also use high bitrate  
MPEG-2.  
Multi Angle (pages 36–38)  
This is a feature of DVD and BD video discs. In some  
discs, the same scene is shot from different angles,  
and these are stored in a single disc so you can enjoy  
playback from each angle. (This function can be  
enjoyed if the disc is recorded with multiple angles.)  
DVD+/-RW (pages 9, 27)  
A DVD+/-RW is a recordable and rewritable DVD. The  
re-recordable feature makes editing possible. The  
DVD+/-RW has two different formats: VR format and  
Video format. DVDs created in Video format have the  
same format as a DVD video, while discs created in  
VR (Video Recording) format allow the contents to be  
programed or edited.  
Multi Audio  
This is a feature of DVD and BD video discs. This  
function makes it possible to record different audio  
tracks for the same video, so you can enhance your  
enjoyment by switching the audio. (You can enjoy  
this function with discs recorded with multiple audio  
tracks.)  
HDMI (page 18)  
HDMI (High-Definition Multimedia Interface) is an  
interface that supports both video and audio on  
a single digital connection. The HDMI connection  
carries standard to high definition video signals  
and multi-channel audio signals to AV components  
such as HDMI equipped TVs, in digital form without  
degradation.  
Netflix (pages 52, 53)  
Netflix is an online DVD and Blu-ray Disc rental service,  
offering rental-by mail and streaming instantly to Netflix  
unlimited members.  
Pandora Radio (page 56)  
Pandora Radio is a personalized Internet radio service  
that helps you find new music based on your old and  
current favorites.  
Infrastructure mode (page 21)  
Infrastructure mode is a wireless LAN communication  
format. This performs wireless communication through  
an access point.  
Pan Scan (PS 4:3) (page 40)  
A screen size that cuts off the sides of the image  
to allow viewing of wide-screen (16:9) material on a  
connected 4:3 TV.  
Interlace format  
Interlace format shows every other line of an image  
as a single “field” and is the standard method for  
displaying images on television. The even numbered  
field shows the even numbered lines of an image, and  
the odd numbered field shows the odd numbered lines  
of an image.  
viii  
Glossary  
Parental control (page 41)  
x.v.Color  
In some digital broadcasts and BD/DVD video discs,  
a control level for disc viewing is set depending on  
the age of the viewer. With this Player, you can set the  
control level for viewing such broadcasts and discs.  
x.v.Color reproduces a greater range of color than  
before, showing almost all of the colors that the human  
eye can detect. (Applicable for JPEG files only with this  
system)  
Pop-up menu (page 28)  
An enhanced menu operation available on BD video  
discs. The pop-up menu appears when POP-UP  
MENU is pressed during playback, and can be  
operated while playback is in progress.  
Progressive format  
Compared to the Interlace format that alternately  
shows every other line of an image (field) to create one  
frame, the Progressive format shows the entire image  
at once as a single frame. This means that while the  
Interlace format can show 30 frames/60 fields in one  
second, the Progressive format can show 60 frames in  
one second. The overall picture quality increases and  
still images, text, and horizontal lines appear sharper.  
Region code (page 9)  
Code identifying a geographic region of compatibility  
for a BD/DVD.  
Resume playback (page 27)  
If you stop playback while it is in progress, the Player  
stores the stop position in memory, and this function  
lets you playback from that point.  
Skip (pages 31, 32, 34)  
This returns to the start of the chapter (or track) being  
played, or skips to the next chapter (or track).  
Subtitles (pages 36–38)  
These are the lines of text appearing at the bottom of  
the screen which translate or transcribe the dialog.  
They are recorded on many DVD and BD video discs.  
Time number  
This indicates the play time which has elapsed from  
the start of a disc or a title. It can be used to find a  
specific scene quickly. (It may not work with some  
discs.)  
Title number (pages 37, 38)  
These numbers are recorded on DVD and Blu-ray  
discs. When a disc contains two or more movies,  
these movies are numbered as title 1, title 2, etc.  
Top menu (page 28)  
In a BD/DVD video, this is the menu for selecting  
things like the chapter to be played back and the  
subtitle language. In some DVD videos, the top menu  
may be called the “Title Menu”.  
Track number (pages 37, 38)  
These numbers are assigned to the tracks which are  
recorded on audio CDs. They enable specific tracks to  
be located quickly.  
VUDU (pages 53–54)  
VUDU is an on-demand video service for renting or  
buying movies that can be watched instantly on TV.  
ix  
Network Service Disclaimer  
This Sharp device facilitates the access to content and services provided by third parties. The content and  
services accessible via this device belong to and may be proprietary to third parties. Therefore, any use of such  
third party content and services must be in accordance with any authorization or terms of use provided by  
such content or service provider. Sharp shall not be liable to you or any third party for your failure to abide by  
such authorization or terms of use. Unless otherwise specifically authorized by the applicable content or service  
provider, all third party content and services provided are for personal and non-commercial use; you may not  
modify, copy, distribute, transmit, display, perform, reproduce, upload, publish, license, create derivative works  
from, transfer or sell in any manner or medium any content or services available via this device.  
Sharp is not responsible, nor liable, for customer service-related issues related to the third party content or  
services. Any questions, comments or service-related inquiries relating to the third party content or service should  
be made directly to the applicable content or service provider.  
You may not be able to access content or services from the device for a variety of reasons which may be unrelated  
to the device itself, including, but not limited to, power failure, other Internet connection, or failure to configure your  
device properly. Sharp, its directors, officers, employees, agents, contractors and affiliates shall not be liable to you  
or any third party with respect to such failures or maintenance outages, regardless of cause or whether or not it  
could have been avoided.  
ALL THIRD PARTY CONTENT OR SERVICES ACCESSIBLE VIA THIS DEVICE IS PROVIDED TO YOU ON  
AN “AS-IS” AND “AS AVAILABLE” BASIS AND SHARP AND ITS AFFILIATES MAKE NO WARRANTY OR  
REPRESENTATION OF ANY KIND TO YOU, EITHER EXPRESS OR IMPLIED, INCLUDING, WITHOUT LIMITATION,  
ANY WARRANTIES OF MERCHANTABILITY, NON-INFRINGEMENT, FITNESS FOR A PARTICULAR PURPOSE  
OR ANY WARRANTIES OF SUITABILITY, AVAILABILITY, ACCURACY, COMPLETENESS, SECURITY, TITLE,  
USEFULNESS, LACK OF NEGLIGENCE OR ERROR-FREE OR UNINTERRUPTED OPERATION OR USE OF THE  
CONTENT OR SERVICES PROVIDED TO YOU OR THAT THE CONTENT OR SERVICES WILL MEET YOUR  
REQUIREMENTS OR EXPECTATIONS.  
SHARP IS NOT AN AGENT OF AND ASSUMES NO RESPONSIBILITY FOR THE ACTS OR OMISSIONS OF  
THIRD PARTY CONTENT OR SERVICE PROVIDERS, NOR ANY ASPECT OF THE CONTENT OR SERVICE  
RELATED TO SUCH THIRD PARTY PROVIDERS.  
IN NO EVENT WILL SHARP AND/OR ITS AFFILIATES BE LIABLE TO YOU OR ANY THIRD PARTY FOR ANY  
DIRECT, INDIRECT, SPECIAL, INCIDENTAL, PUNITIVE, CONSEQUENTIAL OR OTHER DAMAGES, WHETHER  
THE THEORY OF LIABILITY IS BASED ON CONTRACT, TORT, NEGLIGENCE, BREACH OF WARRANTY, STRICT  
LIABILITY OR OTHERWISE AND WHETHER OR NOT SHARP AND/OR ITS AFFILIATES HAVE BEEN ADVISED OF  
THE POSSIBILITY OF SUCH DAMAGES.  
x
About Software License  
Information on the Software License for This Product  
Software composition  
The software included in this product is comprised of various software components whose individual copyrights are held by  
SHARP or by third parties.  
Software developed by SHARP and open source software  
The copyrights for the software components and various relevant documents included with this product that were developed or  
written by SHARP are owned by SHARP and are protected by the Copyright Act, international treaties, and other relevant laws.  
This product also makes use of freely distributed software and software components whose copyrights are held by third parties.  
These include software components covered by a GNU General Public License (hereafter GPL), a GNU Lesser General Public  
License (hereafter LGPL) or other license agreement.  
Obtaining source code  
Some of the open source software licensors require the distributor to provide the source code with the executable software  
components. GPL and LGPL include similar requirements. For information on obtaining the source code for the open source  
software and for obtaining the GPL, LGPL, and other license agreement information, visit the following website:  
We are unable to answer any questions about the source code for the open source software. The source code for the software  
components whose copyrights are held by SHARP is not distributed.  
Acknowledgements  
The following open source software components are included in this product:  
• directfb-extra • cairo • directfb • iconv • openssl • curl • freetype • jpeg • expat • mng • png • xml • zlib • kernel • net-tools  
• GNU bash • busybox • cramfs • dhcpcd • e2fsprogs • fdisk • TinyLogin • sysutils • iptables • mtd-utils • ntfs-3g • sfdisk • hotplug  
• utelnetd • procps • GNU termcap • libusb • uClibc • tcpdump • strace • hdparm • libpcap • portmap  
Software License Notice  
Software License Notice Requirements  
The software components incorporated into this product include components whose copyright holders require license notices.  
The license notices for these software components are shown below.  
OpenSSL License  
This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit. (http://www.openssl.org)  
Original SSLeay License  
This product includes cryptographic software written by Eric Young ([email protected]).  
BSD License  
This product includes software developed by the University of California, Berkeley and its contributors.  
xi  
CONSUMER LIMITED WARRANTY  
(Valid for warranty service in the U.S. and PUERTO RICO only)  
CONSUMER LIMITED WARRANTY  
SHARP ELECTRONICS CORPORATION warrants to the first consumer purchaser that this Sharp brand product (the  
“Product”), when shipped in its original container, will be free from defective workmanship and materials, and agrees that  
it will, at its option, either repair the defect or replace the defective Product or part thereof with a new or remanufactured  
equivalent at no charge to the purchaser for parts or labor for the period(s) set forth below.  
This warranty does not apply to any appearance items of the Product or if the serial number or model number affixed to  
the Product has been removed, defaced, changed, altered or tampered with. This warranty does not cover installation  
or signal reception problems. This limited warranty will not apply if the Product has been or is being used in a commer-  
cial setting or application; this warranty is meant solely for the non-commercial, household use of the Product by  
consumers in their home or residence.  
In order to enforce the rights under this limited warranty, the purchaser should follow the steps set forth below and  
provide proof of purchase to the servicer.  
To the extent permitted by applicable state law, the warranties set forth are in lieu of, and exclusive of, all other warran-  
ties, express or implied. Specifically ALL OTHER WARRANTIES OTHER THAN THOSE SET FORTH ABOVE ARE  
EXCLUDED, ALL EXPRESS AND IMPLIED WARRANTIES INCLUDING THE WARRANTIES OF MERCHANTABILITY,  
FITNESS FOR USE, AND FITNESS FOR A PARTICULAR PURPOSE ARE SPECIFICALLY EXCLUDED. IF, UNDER APPLI-  
CABLE STATE LAW, IMPLIED WARRANTIES MAY NOT VALIDLY BE DISCLAIMED OR EXCLUDED, THE DURATION OF  
SUCH IMPLIED WARRANTIES IS LIMITED TO THE PERIOD(S) FROM THE DATE OF PURCHASE SET FORTH BELOW.  
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY  
FROM STATE TO STATE.  
The warranties given herein shall be the sole and exclusive warranties granted by Sharp and shall be the sole and exclu-  
sive remedy available to the purchaser and only for the time periods set forth herein. No other representations or prom-  
ises made by anyone are permitted. Correction of defects, in the manner and for the period of time described herein,  
shall constitute complete fulfillment of all liabilities and responsibilities of Sharp to the purchaser with respect to the  
Product, and shall constitute full satisfaction of all claims, whether based on contract, negligence, strict liability or other-  
wise. Sharp does not warrant nor shall Sharp be liable, or in any way responsible, for Products which have been subject  
to abuse (including, but not limited to, improper voltage), accident, misuse, negligence, lack of reasonable care, altera-  
tion, modification, tampering, improper operation or maintenance or any damages or defects in the Product which were  
caused by repairs or attempted repairs performed by anyone other than a Sharp authorized servicer. Nor shall Sharp be  
liable or in any way responsible for any incidental or consequential economic or property damage. Some states do not  
allow limits on warranties or on remedies for breach in certain transactions; in such states, the limits herein may not  
apply.  
THIS LIMITED WARRANTY IS VALID ONLY IN THE FIFTY (50) UNITED STATES, THE DISTRICT OF COLUMBIA. AND  
PUERTO RICO  
Model Specific Section  
Your Product Model Number & Description:  
BD-HP80U BLU-RAY DISC/DVD PLAYER  
(Be sure to have this information available when you need  
service for your Product.)  
Warranty Period for this Product:  
One (1) year parts and labor from the date of purchase.  
Additional Item(s) Excluded from  
Warranty Coverage (if any):  
Non-rechargeable batteries.  
Where to Obtain Service:  
From a Sharp Authorized Servicer located in the United  
States. To find the location of the nearest Sharp Authorized  
Servicer, call Sharp toll free at 1-800-BE-SHARP.  
What to do to Obtain Service:  
Please transport the Product in its original packaging and  
ensure that the Product is covered to avoid scratches and  
damage. Sharp shall not be responsible for lost, stolen or  
misdirected mail or for damage to the product incurred  
during shipping.  
TO OBTAIN PRODUCT INFORMATION, CALL 1-800-BE-SHARP OR VISIT www.sharpusa.com  
xii  
SHARP ELECTRONICS CORPORATION  
Sharp Plaza, Mahwah, New Jersey 07495-1163  
SHARP CORPORATION  
Printed in China  
Imprimé en Chine  
TINS-E893WJQZ  
10P08-CH-NG  
<ORC9005-A>  

Weil McLain P SGO User Manual
Tiffen Domke F 9 User Manual
Tektronix Cable Box SDA601 User Manual
Sony HXR MC50P User Manual
Sony HDW 730S User Manual
Sony DCR TRV241E User Manual
Sony CCD TR User Manual
Sony CCD TR618 User Manual
Sony Car Stereo System CXS 2100 User Manual
Rosewill R BC 01 User Manual