Samsung WEP180 User Manual

Before using your headset  
Check the accessories  
Charge your headset  
Thank you for purchasing the Samsung Bluetooth  
Mono Headset WEP180, we hope you will be  
delighted with its operation.  
Take a moment before you get started to  
familiarize yourself with your new headset.  
Make sure you have the following items with your  
headset:  
Charge the headset's battery fully before using  
the headset for the first time.  
3
Remove the travel adapter from the headset.  
Quick Start Guide  
Bluetooth® Headset  
WEP180  
Get connected in 4 quick steps  
NOTES:  
Travel adapter, User’s Guide, 1 ear hook  
1
Plug the travel adapter into the jack on the  
headset.  
• The headset cannot be used while charging.  
• Use only a Samsung-approved charger or adapter.  
Samsung  
NOTE:  
The items supplied with your headset and the accessories  
at your Samsung dealer may vary, depending on you  
country or service provider.  
Multi-Function  
Adapter jack  
button  
• Bluetooth version: 2.0 (compatible with devices of  
Bluetooth version 1.1 or higher)  
• Supported Bluetooth profiles:  
- Headset profile  
Charge your headset  
Earpiece  
Put your headset in pairing mode  
Turn on Bluetooth on your phone and  
pair with headset  
2
Plug the travel adapter into the electrical  
outlet.  
Indicator light  
Volume control  
- Hands-free profile  
• Charge the headset until the red light on the  
headset turns to blue.  
buttons  
Microphone  
Test and use  
• The headset will be fully charged in  
approximately 2 hours 30 minutes.  
Start here  
Put your headset in  
pairing mode  
Before you can use your headset, you must pair it  
with your phone.  
Turn on Bluetooth on your  
phone and pair with headset  
Test and use  
Your phone and headset are now paired and  
ready to make and receive calls. To confirm  
they are operating properly, make a call:  
1
Set your Bluetooth phone to discover the  
headset by following your phone's guide.  
Using your WEP180  
Headquarters:  
1301 East Lookout Drive Suite 150  
Richardson, TX 75082  
1
Place the headset over your ear.  
See Wearing the headset on the reverse  
side of this guide.  
Typically, the steps involve going to the Settings,  
Connection, or Bluetooth menu on your  
phone and then selecting the option to discover  
Bluetooth devices.  
1
2
Ensure that the headset is off (see Turn  
headset on/off on the reverse side of this guide).  
See Features and Functions Guide  
on the reverse side of this guide  
for information on using your  
WEP180.  
Internet Address:  
accessories  
Press and hold the Multi-Function button until  
the indicator light turns on in blue  
(approximately 8 seconds).  
2
3
On your phone, make a call to the number  
you want.  
Your phone will find the Samsung WEP180  
headset. your headset will be displayed as  
Samsung WEP 180/185.  
If your phone and headset are successfully  
paired, you will hear ringing on the headset.  
Customer Care Center:  
1-888-987-4357  
2
3
Select your headset.  
After you have successfully paired your phone  
and headset, you do not need to repeat these  
initial setup steps each time you use the  
headset.  
When the phone asks if you want to pair with it,  
confirm by selecting Yes or OK.  
4
Enter the headset passkey or PIN, 0000.  
Guide No.: GH68-12459A  
09/2006. Rev. 1.0  

Westcott 1822 User Manual
West Bend MCD 289 User Manual
Sony XR 3300 User Manual
Sony Walkman BCR NWA800 User Manual
Sony CCD TR648E User Manual
Sony Camcorder HDR CX220 User Manual
Sony BRC Z330 User Manual
Sony A390 User Manual
Sirius Satellite Radio Stratus 6 SDSV6 User Manual
Samsung Car Video System P2350G User Manual