Samsung SDC 311 SERIES User Manual

COLOR CCD CAMERA  
INSTRUCTION MANUAL  
SDC-311 SERIES  
SDC-241 SERIES  
SALESꢀNETWORK  
·
SAMSUNG OPTO-ELECTRONICS AMERICA INC.  
·SAMSUNG TECHWIN CO., LTD  
40 SEAVIEW DIRVE, SECAUCUS N.J  
07094, U.S.A.  
OPTICS & DIGITAL IMAGING DIV.  
145 -3, SANGDAEWON 1-DONG, JUNGWON-GU,  
SUNGNAM, KYUNGKI-DO, KOREA  
462-121  
TEL :(201)902-0347  
FAX: (201)902-9342  
SAMSUNG CCD CAMERA  
TEL :82 -031-740-8121~41  
FAX:82 -031-740-8145  
P/NO.:6806-0231-01C  
Printed in Korea  
Features  
Contents  
.......................................................................  
Electronic Iris  
Automatic Backlight Compensation  
PRECAUTIONS  
6
...........................................  
Electronicꢁirisꢁshutterꢁisꢁautomatically  
controlledꢁatꢁtheꢁspeedꢁof  
GETTING TO KNOW YOUR CAMERA  
8
8
Theꢁ backlightꢁ compensationꢁ technology  
allowsꢁ theꢁ cameraꢁ toꢁ findꢁ theꢁ best  
pictureꢁ conditionsꢁ inꢁ anyꢁ environment  
andꢁautomaticallyꢁgivesꢁaꢁnecessaryꢁlight  
levelꢁcompensation,ꢁsoꢁthatꢁyouꢁ  
........................................................................  
Frontꢁ  
1/60~1/100,000sec(NTSCꢁModels),ꢁ/  
1/50~1/100,000sec(PALꢁModels).  
.....................................................................  
Bottomꢁ  
9
.......................................................................  
Backꢁ  
10  
11  
canalwaysobtaintheclearpicture,the  
finestꢁdetailꢁandꢁperfectꢁlightꢁcontrast.  
............................................................  
Accessoriesꢁ  
Video/DC Selection Switch  
.......................................................................  
CONNECTION  
12  
High Resolution  
.......................................................................  
........................................  
Lensꢁ  
12  
Theꢁcameraꢁacceptsꢁ2ꢁtypesꢁofꢁautoꢁirisꢁ  
lenses(DCꢁtype/VIDEOꢁtype)ꢁand  
InstallingꢁAutoꢁIRIS Lensꢁ  
12  
Theꢁhorizontalꢁresolutionꢁofꢁ470ꢁTVꢁlinesꢁcanꢁ  
beꢁachievedꢁbyꢁusingꢁaꢁhighꢁdensityꢁCCDꢁ  
havingꢁeffectiveꢁ410,000ꢁpixels,ꢁwhichꢁ  
providesꢁclean,ꢁnoiselessꢁandꢁreliable  
pictures.  
isꢁsetꢁwithꢁVIDEO/DCꢁselectionꢁswitch.  
.................................  
InstallingꢁC/CSꢁ-MountꢁLensꢁ  
14  
............................................  
ConnectingꢁtoꢁMonitorꢁ  
..............................................  
16  
ConnectingꢁtoꢁPowerꢁ  
17  
SYNC. System  
(SDC-241Seriesꢁꢁhaveꢁ270,000ꢁpixelsꢁand  
canꢁachieveꢁ330ꢁTVꢁlines)  
.........................................................  
MENUꢁSETUPꢁ  
18  
...........................................  
YouꢁcanꢁselectꢁINT(Internalꢁ  
Synchronization)ꢁmodeꢁorꢁL. L(Linelock  
Synchronization)ꢁmode.  
TROUBLESHOOTINGꢁ  
20ꢁꢁ  
...................................................................  
High Sensitivity  
SPECIFICATIONS  
22  
WeꢁutilizeꢁaꢁhighꢁsensitivityꢁSonyꢁcolorꢁCCD  
imager.ꢁThisꢁallowsꢁforꢁclearꢁandꢁvivid  
imagesꢁunderꢁdarkꢁsituationꢁasꢁlowꢁasꢁa  
minimumꢁofꢁ0.4 lux.  
COLOR CCD CAMERA  
COLOR CCD CAMERA  
4
5
Precautions  
Do not drop the camera or subject  
them to physical shocks.  
Never keep the camera face to strong  
light directly.  
Do not install the camera in extreme  
temperature conditions.  
Do not install or use the camera in an  
environment where the humidity is high.  
Doꢁuseꢁtheꢁcameraꢁunderꢁconditionsꢁwhere  
temperaturesꢁareꢁwithinꢁ-10°Cꢁtoꢁ50°C.  
Especiallyꢁbeꢁcarefulꢁforꢁventilationꢁunder  
highꢁtemperature.  
Itꢁcanꢁcauseꢁtheꢁimageꢁqualityꢁtoꢁbeꢁpoor.  
Itꢁcanꢁcauseꢁmalfunctionsꢁtoꢁoccur.  
ItꢁcanꢁdamageꢁtheꢁCCD.  
Do not expose the camera to rain or  
spill beverage on it.  
Do not touch the front glass of the  
camera.  
Do not install the camera under  
unstable lighting conditions.  
Never use the camera close to a  
gas or oil leak.  
Ifꢁitꢁgetsꢁwet,ꢁwipeꢁitꢁdryꢁimmediately.  
Liquidsꢁcanꢁcontainꢁmineralsꢁthatꢁcorrode  
theꢁelectronicꢁcomponents.  
Itꢁisꢁoneꢁofꢁtheꢁmostꢁimportantꢁpartsꢁof  
camera.  
Severeꢁlightingꢁchangeꢁorꢁflickerꢁcan  
causeꢁtheꢁcameraꢁtoꢁworkꢁimproperly.  
Itꢁcanꢁcauseꢁmalfunctionsꢁtoꢁoccur.  
Beꢁcarefulꢁnotꢁtoꢁbeꢁstainedꢁbyꢁfingerprint.  
Do not disassemble the camera.  
Thereꢁareꢁnoꢁuser-serviceableꢁ  
partsꢁinsideꢁit.  
•Ifꢁtheꢁcameraꢁisꢁexposedꢁtoꢁspotlightꢁorꢁobjectꢁreflectingꢁtheꢁstrongꢁlight,  
smearꢁorꢁbloomingꢁmayꢁoccur.  
•Pleaseꢁcheckꢁtheꢁpowerꢁwhetherꢁitꢁsatisfiesꢁtheꢁnormalꢁspecification  
beforeꢁconnectingꢁtheꢁcamera.  
COLOR CCD CAMERA  
COLOR CCD CAMERA  
7
6
Getting to Know Your Camera  
Tripod Mounting Hole  
Bottom  
Used to install the camera on an optional  
tripod. The tripod must be equipped with  
the screw specified as shown below.  
Front  
Focal Length Adjusting Knob.  
Used to adjust Back focal length.  
1/4-20ꢁUNCꢁ(20ꢁTHREAD)  
L:4.5mm 0.2mmꢁ(ISOꢁstandard),ꢁ  
Tripod Mounting Bracket Screw Hole.  
Used to fix Tripod mounting bracket on  
the top of the camera.  
L
orꢁ0.197”(ASAꢁstandard)ꢁ  
Auto Iris Lens Connector.  
Used to connect Auto iris lens plug.  
You can remove and install this bracket  
on the top of the camera. You must use  
the supplied screw or the equivalent  
(within 4mm). If not, the bracket may  
not fixed properly.  
Back Focus Lock Screw.  
Used to fix Focal length adjusting knob.  
COLOR CCD CAMERA  
COLOR CCD CAMERA  
8
9
Back  
AC type  
DC type  
Power LED  
Power LED  
The LED turned on  
when power is supplied.  
Video Output Jack  
Used to connect an external  
video monitor in jack.  
Video Output Jack  
Used to connect an external  
video monitor in jack.  
The LED turned on  
when power is supplied.  
V. PHASE  
Used to adjust vertical  
phase  
DC Level  
Used to adjust DC IRIS lens level.  
(You can adjust DC level when  
ESC mode is off.)  
DC Level  
Used to adjust DC IRIS lens level.  
(You can adjust DC level when  
ESC mode is off.)  
Linelock mode from 0~270  
Menu Setup Switch  
Used to choose the desired menu  
on or off, select the menu.  
Menu Setup Switch  
Used to choose the desired menu  
on or off, select the menu.  
GND  
Power ground.  
GND  
Power ground.  
Power Input Terminal  
It involved power input.  
Use only AC 24V, UL Listed  
Class 2 Power Supply  
(SDC-311PA)  
Power Input Terminal  
It involved power input.  
AC24V GND  
(SDC-311NA/241NA)  
(SDC-241PA)  
Iris Lens Plug  
Instruction Manual  
High Voltage Type  
•Theꢁimageꢁhasꢁbeenꢁsetꢁforꢁoptimumꢁperformanceꢁatꢁtheꢁfactory.  
Doꢁnotꢁremoveꢁtheꢁcoverꢁunlessꢁitꢁisꢁabsolutelyꢁnecessary.  
Itꢁcouldꢁcauseꢁdamageꢁtoꢁcomponentsꢁandꢁproblems.  
-Beꢁsureꢁtoꢁcheckꢁtheꢁpowerꢁisꢁoffꢁwhenꢁremovingꢁtheꢁcover.  
COLOR CCD CAMERA  
COLOR CCD CAMERA  
11  
10  
Connection  
4. Remove the protecting cap, and attach the lens into the camera  
by turning clockwise.  
Lens  
Lens is not supplied with this camera. Purchase a lens suitable  
for your environment. This camera accepts auto iris lens, both  
C- and CS-mount lens.  
5. Connect the lens plug to the auto iris connector on the rear of the  
camera.  
•Ifꢁtheꢁlensꢁisꢁstainedꢁwithꢁfingerprintꢁorꢁsomething,ꢁtheꢁimageꢁqualityꢁ  
mightꢁbeꢁpoor.ꢁ  
•Itꢁisꢁrecommendedꢁtoꢁuseꢁaꢁhighꢁqualityꢁlensꢁtoꢁimproveꢁtheꢁimageꢁ  
qualityꢁunderꢁlowꢁillumination.  
Installing Auto Iris Lens  
6. Set the DC/VIDEO selection switch to DC or VIDEO according to  
the type of the lens.  
1. Peel the end of lens cable outer cover approximately 8mm.  
approx.8mm  
2. Peel the end of the cable inner cover approximately 2mm.  
approx.2mm  
3. Remove the cover from the connector pin supplied, and solder  
the lens cable to the connector pin as shown below.  
Cover  
Video type :  
DC type :  
Lens cable  
No.1 Pin Red (Power source)  
No.2 Pin N. C  
No.3 Pin White (Video signal)  
No.4 Pin Black (GND)  
No.1 Pin Damping -  
No.2 Pin Damping +  
No.3 Pin Drive +  
No.4 Pin Drive -  
No.3 Pin  
No.1 Pin  
Connector  
No.4 Pin  
No.2 Pin  
COLOR CCD CAMERA  
COLOR CCD CAMERA  
13  
12  
In case of mounting a C-mount lens  
Installing C/CS-Mount lens  
Before mounting a lens, please check whether it is a C-mount or  
1.ꢁAfterꢁremovingꢁtheꢁprotecting  
cap,ꢁloosenꢁtheꢁBackꢁfocusꢁlockꢁ  
screwꢁwithꢁscrewdriver.  
2.ꢁTurnꢁtheꢁFocalꢁlengthꢁadjusting  
knobꢁtoꢁcounterclockwiseꢁuntil  
locking.  
CS-mount lens.  
The back focus has set for CS-mount lens at the factory.  
If the mount is changed to the C-mount lens, it may need to  
be re-adjusted.  
In case of mounting a CS-mount lens  
After removing the protecting cap, attach the lens into the  
camera by turning clockwise.  
3.ꢁAttachꢁtheꢁlensꢁintoꢁtheꢁcameraꢁ 4.ꢁTurnꢁtheꢁFocalꢁlengthꢁadjusting  
byꢁturningꢁclockwise.  
knobꢁtoꢁclockwiseꢁslowlyꢁatꢁthe  
bestꢁpoint.  
•Useꢁtheꢁlensꢁunderꢁtheꢁspecificationꢁasꢁshown.ꢁOtherwiseꢁ  
theꢁlensꢁcanꢁdamageꢁtheꢁcameraꢁorꢁabnormalꢁfixingꢁmayꢁbeꢁresultedꢁin.ꢁ  
5.ꢁTightenꢁtheꢁBackꢁfocusꢁlockꢁscrewꢁ  
withꢁscrewdriver.  
C-mount lens : 10 mm or less  
CS-mount lens : 5 mm or less  
•DoꢁnotꢁturnꢁtheꢁFocalꢁlengthꢁadjustingꢁknob  
tooꢁmuchꢁtoꢁclockwiseꢁafterꢁclickingꢁwhen  
useꢁCS-mountꢁlens.  
•Aꢁheavyꢁlensꢁmayꢁdisturbꢁtheꢁbalanceꢁwithꢁtheꢁcameraꢁandꢁpossiblyꢁresultsꢁinꢁdamage.ꢁ  
Don'tꢁuseꢁmoreꢁthanꢁ450gꢁlens.  
•ItꢁisꢁrecommendedꢁtoꢁsetꢁtheꢁlensꢁALCꢁmodeꢁtoꢁAvꢁmodeꢁ(Average).  
Pkꢁmodeꢁcanꢁbeꢁoccurredꢁꢁhunting.  
COLOR CCD CAMERA  
COLOR CCD CAMERA  
15  
14  
Connecting to Monitor  
Connect the VIDEO Out jack to the monitor VIDEO In jack.  
Connecting to Power  
Each model has different power specification, please check the name of  
the model and power specification before connecting to power source.  
Please refer to the sticker identifying the model, which is attached on  
the product, for power specification.  
CCDꢁCamera  
Monitor  
AC outlet  
•Theꢁwireꢁisꢁpolarized.ꢁBeꢁsureꢁto  
220V  
connectꢁtheꢁwireꢁwithꢁwhiteꢁlineꢁon  
itsꢁcoveringꢁto‘ -ꢁterminalꢁand  
connectꢁtheꢁotherꢁoneꢁto  
‘ +ꢁteminal.  
100V  
•UseꢁDCꢁ12Vꢁpowerꢁsourceꢁ  
forꢁSDC-311(241)ꢁND/PD.  
•UseꢁACꢁ24V~50Hzꢁpowerꢁsource  
forꢁSDC-311(241)PA.  
AC adaptor  
• As a connecting method varies according to instruments, refer to  
the manual supplied with the instrument.  
220V  
100V  
(Theꢁwireꢁisꢁnon-polarized.)  
• Connect the cable after power is turned off.  
AC24V GND  
• Set the 75/Hi-Z selection switch as shown below if you have  
•Theꢁwireꢁisꢁnon -polarized.  
•UseꢁACꢁ24Vꢁ60Hzꢁpowerꢁ  
sourceꢁforꢁSDC-311(241)NA.  
※Connectꢁtheꢁwireꢁbyꢁpushingꢁthe  
button  
intermediate device.  
AC adaptor  
CCDꢁCamera  
Intermediate  
Endꢁmonitor  
230V  
•UseꢁACꢁ230V~50Hzꢁꢁpowerꢁsourceꢁfor  
SDC-311(241)PH.  
230V~50Hz  
•Beꢁsureꢁtoꢁconnectꢁpowerꢁafterꢁallꢁtheꢁinstallationꢁisꢁdone.  
•NoteꢁthatꢁACꢁadaptorꢁisꢁnotꢁsuppliedꢁwithꢁcamera.  
•SinceꢁtheꢁwireꢁofꢁDCꢁpowerꢁtypeꢁisꢁpolarized,ꢁbeꢁcarefulꢁwhen  
Connectingꢁit.ꢁꢁꢁꢁ  
COLOR CCD CAMERA  
COLOR CCD CAMERA  
17  
16  
Menu Setup  
④ Whiteꢁbalanceꢁcontrolꢁmode  
1)ꢁATWꢁ(AutoꢁTracingꢁWhiteꢁbalance)ꢁ:ꢁTheꢁcameraꢁautomatically  
controlsꢁtheꢁwhiteꢁbalanceꢁinꢁanyꢁenvironment.  
2)ꢁAWCꢁ(AutoꢁWhiteꢁbalanceꢁControl)ꢁ:ꢁTheꢁWhiteꢁbalanceꢁisꢁautomatically  
adjustedꢁinꢁaꢁspecificꢁenvironment.  
Use the six Setup Menu buttons on the rear of the camera.  
Menu Setup Switch  
① ElectonicꢁShutterꢁspeedꢁControlꢁ : OFF  
② Flickerless  
ESC FL BLC ATW VIDEO INT  
: OFF  
③ BacklightꢁCompensation  
④ AutoꢁWhiteꢁBalance  
⑤ LENSꢁSelection  
⑥ SyncꢁModeꢁ  
: OFF  
•PleaceꢁselectꢁESCꢁOFFꢁthatꢁchromaꢁmavꢁbeꢁchanceꢁperiodicallv  
becauseꢁofꢁATWꢁmovementꢁunderꢁtheꢁfluorescentꢁlightsꢁindoor.  
: ATW  
: VIDEO  
:ꢁINTꢁ  
⑤ Lensꢁselection  
OFF ON OFF AWC DC LL  
(SDC-241/311ꢁACꢁpowerꢁonly)  
1)ꢁManualꢁLens  
SetꢁMenuꢁSetupꢁswitchꢁESC  
Function of Menu Setup Switch  
2)ꢁAutoꢁIRISꢁLens  
ⓐ VIDEOꢁLensꢁ:ꢁSetꢁtheꢁESCꢁOFFꢁinꢁMenuꢁSetupꢁswitch,ꢁandꢁturn  
DC/VIDEOꢁselectionꢁswitchꢁVIDEO.  
Ifꢁyouꢁneed,ꢁadjustꢁtheꢁbrightnessꢁofꢁtheꢁscreen  
ofꢁtheꢁscreenꢁwithꢁadjustmentꢁVR(ALC,ꢁLEVEL)ꢁon  
theꢁVIDEOꢁlens.  
① ESCꢁ(ElectronicꢁShutterꢁControl)  
YouꢁcanꢁturnꢁESCꢁorꢁOFFꢁtheꢁElectronicꢁShutterꢁControlꢁfeature.  
ThisꢁESCꢁmodeꢁautomaticallyꢁcontrolsꢁtheꢁshutterꢁspeedꢁfrom‘1/60’  
toꢁ 1/100,000ꢁsecꢁ(NTSC),ꢁfromꢁ 1/50’toꢁ 1/100,000sec.ꢁ(PAL)  
IfꢁyouꢁwantꢁtoꢁuseꢁDCꢁorꢁVIDEOꢁlens,ꢁconfirmꢁthisꢁswitchꢁturnꢁOFF.  
(Electronicꢁshutterꢁisꢁfixedꢁinꢁ 1/60’sec.ꢁ(NTSC)ꢁorꢁ 1/50’secꢁ(PAL)  
ⓑ DCꢁLensꢁꢁꢁ :ꢁSetꢁtheꢁESCꢁOFFꢁinꢁtheꢁMenuꢁSetupꢁswitch,ꢁand  
theꢁDC/VIDEOꢁselectionꢁswitchꢁDC.  
② FLꢁ(Flickerless)  
Itꢁmayꢁnecessaryꢁtoꢁadjustꢁtheꢁbrightꢁofꢁtheꢁscreen.  
Ifꢁyouꢁneeds,ꢁhandleꢁtheꢁDCꢁLEVELꢁtheꢁrearꢁofꢁthe  
camera.  
Flickerlessꢁfunction.ꢁInꢁthisꢁfunction,ꢁelectronicꢁshutterꢁisꢁfixedꢁin  
‘1/100sec(NTSC)ꢁorꢁ 1/120’sec(PAL)  
FLꢁfunctionꢁcanꢁcompensationꢁtheꢁflickerꢁcausedꢁbyꢁpower  
frequently,ꢁbutꢁsetꢁoffꢁinꢁtheꢁareaꢁnotꢁusingꢁaꢁ60ꢁHzꢁACꢁpowerꢁonꢁNTSC.  
⑥ INT/L.Lꢁ(SynchronizationꢁSystemꢁMode)  
Twoꢁsynchronizationꢁmodesꢁareꢁavailable.ꢁInꢁL.Lꢁmode,ꢁUseꢁV.Phase  
adjustꢁrelationꢁbetweenꢁtheꢁzeroꢁcrossingꢁpointꢁofꢁACꢁpowerꢁwave  
andꢁV─SyncꢁPulseꢁofꢁtheꢁcamera'sꢁvideoꢁsignal.  
TheꢁV.Phaseꢁhasꢁbeenꢁsetꢁatꢁ220ꢁdegreesꢁandꢁcanꢁbeꢁreadjusted  
inꢁtheꢁrangeꢁofꢁ0ꢁtoꢁ270ꢁdegreesꢁasꢁneed.  
③ BLCꢁ(BacklightꢁCompensation)  
Whenꢁtheꢁlightingꢁsourceꢁinꢁtheꢁrearꢁofꢁobject,ꢁtheꢁobjectꢁmightꢁbe  
seenꢁsomeꢁdarkness.ꢁIfꢁyouꢁwantꢁtoꢁseeꢁobjectꢁclearly,ꢁturnꢁthis  
switchꢁBLC.ꢁTheꢁeffectiveꢁareaꢁwhereꢁbacklightꢁcompensationꢁis  
fixedꢁinꢁtheꢁcenterꢁofꢁtheꢁscreen.  
L.Lꢁmodeꢁcanꢁbeꢁusedꢁinꢁ60Hzꢁ(SDC-241/311NA).  
50Hzꢁ(SDC-241/311PA/PH)  
IfꢁyouꢁwantꢁtoꢁuseꢁDCꢁorꢁVIDEOꢁlens,ꢁconfirmꢁthisꢁswitchꢁOFF.  
0ꢁꢁꢁꢁꢁ 5ꢁꢁꢁꢁꢁꢁ 10ꢁꢁꢁꢁꢁꢁ15  
0
7
⑦ AGCꢁ(AutoꢁGainꢁControl)  
Alwaysꢁon.  
13  
15  
COLOR CCD CAMERA  
19  
COLOR CCD CAMERA  
18  
Troubleshooting  
If you have trouble operating your camera, refer to the following.  
If the guidelines do not enable you to solve the problem, contact  
an authorized technician.  
Problem  
Solution  
The color of the picture is not  
matched.  
• Check that you have properly set White Balance  
Control Mode.  
Problem  
Solution  
• Adjust the contrast feature of the monitor.  
The contrast on the screen  
is too weak.  
• Check that the power cord and line connection  
between the camera and monitor are made  
properly.  
• If the camera is exposed under too strong light,  
change the camera position.  
Nothing appears on the  
screen.  
• Does the camera face to directly to the sun or  
fluorescent lighting?  
• Check that the DC/VIDEO selection switch on the  
rear of the camera is set to a proper position  
according to the type of your auto iris lens.  
Change the camera position.  
The image on the screen  
flickers.  
• Check that the DC/VIDEO selection switch on  
the rear of the camera set to a proper position  
according to the type of your auto iris lens.  
The image on the screen  
is dark.  
Check that you have set ESC feature  
• Check that you have used 50Hz (PAL models),  
60Hz(NTSC models) the linelock synchronization  
mode cannot be used.  
• Check if the lens are stained. If  
dirty, clean the lens with soft,  
clean cloth.  
The image on the screen  
is dim.  
The image on the screen is  
distorted.  
Use the Synchronization Mode to INT mode.  
The camera is not work  
properly, and the surface  
of the camera case is hot.  
• Check that you have connected the  
camera to a proper power.  
COLOR CCD CAMERA  
COLOR CCD CAMERA  
21  
20  
Specifications  
SDC-311 Series  
SDC-241 Series  
SDC-311ND SDC-311NA  
SDC-311PD SDC-311PA SDC-311PH  
SDC-241ND SDC-241NA SDC-241PD SDC-241PA SDC-241PH  
Item  
Item  
ACꢁ24V  
60Hz  
ACꢁ24V~ AC230V~  
50Hzꢁ  
ACꢁ24V  
DCꢁ12V  
ACꢁ24V~ AC230V~  
DCꢁ12V  
PowerꢁSource  
PowerꢁSource  
DCꢁ12V  
DCꢁ12V  
60Hz  
50Hz  
50Hzꢁ  
50Hz  
PowerꢁConsumption  
InputꢁCurrent  
4.5W  
6.5W  
240mA  
4.5W  
6.5W  
6.5W  
PowerꢁConsumption  
InputꢁCurrent  
4.0W  
6.0W  
240mA  
4.0W  
6.0W  
6.0W  
350mA  
350mA  
240mA  
32mA  
320mA  
320mA  
240mA  
28mA  
INT/Linelock  
selectable  
INT/Linelock  
selectable  
SYNC.ꢁSystem  
Pick-UpꢁDevice  
ScanningꢁSystem  
INTꢁOnly  
INTꢁOnly  
INT/Linelockꢁꢁselectable  
SYNC.ꢁSystem  
Pick-UpꢁDevice  
ScanningꢁSystem  
INTꢁOnly  
INTꢁOnly  
INT/Linelockꢁꢁselectable  
1/3  
CCD,ꢁ768(H)×494(V)  
1/3”CCD,ꢁ510(H)×492(V)  
2:1ꢁInterlace(NTSCꢁStandard)  
525ꢁLinesꢁ/ꢁ60ꢁFieldsꢁ/30ꢁFrames  
1.0ꢁVp-pꢁNTSCꢁComp  
1/3  
CCD,ꢁ500(H)×582(V)  
1/3”CCD,ꢁ752(H)×582(V)  
2:1ꢁInterlace(PALꢁStandard)  
625ꢁLinesꢁ/ꢁ50ꢁFieldsꢁ/ꢁ25Frames  
1.0ꢁVp-pꢁPALꢁComp  
2:1ꢁInterlace(NTSCꢁStandard)  
525ꢁLinesꢁ/ꢁ60ꢁFieldsꢁ/30ꢁFrames  
1.0ꢁVp-pꢁNTSCꢁComp  
2:1ꢁInterlace(PALꢁStandard)  
625ꢁLinesꢁ/ꢁ50ꢁFieldsꢁ/ꢁ25Frames  
1.0ꢁVp-pꢁPALꢁComp  
VideoꢁOutput  
ElectronicꢁIris  
MinimumꢁIllumlnation  
Resolution  
BacklightꢁCompensation  
IrisꢁMode  
VideoꢁOutput  
ElectronicꢁIris  
MinimumꢁIllumlnation  
Resolution  
BacklightꢁCompensation  
IrisꢁMode  
1/60~1/100,000ꢁsec  
1/60~1/100,000ꢁsec  
1/50~1/100,000ꢁsec  
1/50~1/100,000ꢁsec  
0.7ꢁLuxꢁatꢁFꢁ1.2  
0.3ꢁLuxꢁatꢁFꢁ1.2  
480(H)ꢁTVꢁIines  
ON/OFFꢁSelectable  
VIDEOꢁ/ꢁDCꢁ/ꢁESCꢁSelectable  
Cꢁ/ꢁCSꢁMountꢁChangeable  
AlwaysꢁOn  
330(H)ꢁTVꢁIines  
ON/OFFꢁSelectable  
VIDEOꢁ/ꢁDCꢁ/ꢁESCꢁSelectable  
Cꢁ/ꢁCSꢁMountꢁChangeable  
AlwaysꢁOn  
Lens  
Lens  
AGC  
AGC  
Flickerless  
WhiteꢁBalance  
Gamma  
ON/OFFꢁSelectable  
ATWꢁ/ꢁAWCꢁ  
Flickerless  
WhiteꢁBalance  
Gamma  
ON/OFFꢁSelectable  
ATWꢁ/ꢁAWCꢁ  
γ=0.45  
γ=0.45  
S/NꢁRatio  
AmbientꢁTemp  
Dimension  
48dBꢁ(AGCꢁOFF)  
S/NꢁRatio  
AmbientꢁTemp  
Dimension  
48dBꢁ(AGCꢁOFF)  
10°C~+50°C  
10°C~+50°C  
55(W)×50(H)ꢁ×121(L)ꢁmmꢁ(WithoutꢁLens)  
55(W)×50(H)ꢁ×121(L)ꢁmmꢁ(WithoutꢁLens)  
530gꢁ  
(Withoutꢁ (Withoutꢁ (Withoutꢁ  
Lens)  
550gꢁ  
530gꢁ  
(Withoutꢁ (Withoutꢁ (Withoutꢁ  
Lens)  
550gꢁ  
320g  
(Without  
Lens)  
530gꢁ  
(Without  
Lens)  
320gꢁ  
320g  
(Without  
Lens)  
530g  
(Without  
Lens)  
320gꢁ  
Weight  
Weight  
Lens)  
Lens)  
Lens)  
Lens)  
Accessory  
Accessory  
Irisꢁjack,ꢁInstructionꢁManual  
Irisꢁjack,ꢁInstructionꢁManual  
Design and specifications are subject to change without notice.  
Design and specifications are subject to change without notice.  
COLOR CCD CAMERA  
COLOR CCD CAMERA  
23  
22  

Vulcan Hart ML52210 User Manual
Vivitar Digital Binocular Camera viv cv 530v User Manual
Tiffen Pro T User Manual
Sony DSX S200X User Manual
Sony CDX GT430IP User Manual
Sony Camcorder HDR SR11E User Manual
Sony Camcorder CD TRV25 User Manual
Sony Camcorder BRC H700 User Manual
Scotch Brand 5.1.10 User Manual
Sanyo KR 600AAL User Manual