Samsung SCL700 User Manual

ENGLISH  
Video Camcorder  
8mm  
COLOR LCD  
SCL700/L710/L750/L770  
SCL700/L710/L750/L770  
Hi  
ELECTRONICS  
US  
Owner’s Instruction Book  
Before operating the unit, please read  
this instruction book thoroughly, and retain it for  
future reference.  
ENGLISH  
Contents (continued )  
Program AE (Automatic Exposure) ................................................................................................................................................42  
DSE (Digital Special Effects) in CAMERA mode ...........................................................................................................................44  
Setting and Recording DATE/TIME................................................................................................................................................46  
Selecting and Recording a Title .....................................................................................................................................................48  
Fade In and Out .............................................................................................................................................................................50  
PIP (SCL750/L770 only).................................................................................................................................................................51  
Snap Shot (SCL750/L770 only) .....................................................................................................................................................52  
White Balance ................................................................................................................................................................................53  
Demonstration ................................................................................................................................................................................54  
Setting the Date/Title color.............................................................................................................................................................55  
Lighting Techniques........................................................................................................................................................................56  
Playing back a Tape  
To watch with LCD ........................................................................................................................................................................57  
To watch with TV monitor...............................................................................................................................................................57  
Various Functions in PLAYER mode..............................................................................................................................................59  
Adjusting the LCD ..........................................................................................................................................................................60  
Setting the Speaker ON/OFF.........................................................................................................................................................60  
DSE in PLAYER mode ...................................................................................................................................................................60  
Multi Playback (Using the PAL60 System).....................................................................................................................................61  
USB interface (SCL770 only)...........................................................................................................................................62  
Installing USB Media 2.0 Program.................................................................................................................................................63  
Maintenance  
Cleaning and Taking care of the Camcorder..................................................................................................................................66  
Cleaning the Viewfinder ......................................................................................................................................................66  
Cleaning the LCD Panel ......................................................................................................................................................66  
Cleaning the Video Heads ..................................................................................................................................................66  
Storing the Camcorder.........................................................................................................................................................66  
Using Your Camcorder Abroad......................................................................................................................................67  
Troubleshooting  
Self Diagnosis Display ..................................................................................................................................................................68  
Checking.........................................................................................................................................................................................69  
Moisture Condensation ..................................................................................................................................................................71  
Specifications ............................................................................................................................................................................72  
Index...............................................................................................................................................................................................73  
Warranty......................................................................................................................................................................................75  
3
ENGLISH  
Notices a nd Sa fety Instructions  
Notices regarding rotation of LCD screen  
Please rotate the LCD screen carefully as illustrated.  
Unintended rotation may cause damage to the inside of the  
hinge that connects the LCD screen to the Camcorder.  
1)  
2)  
1) LCD screen closed.  
2) Standard recording by using the LCD screen.  
90°  
3)  
3) Making a recording by looking at the LCD screen from the top.  
90°  
4)  
5)  
4) Making a recording by looking at the LCD screen from the front.  
5) Making a recording with the LCD screen closed.  
90°  
90°  
Notices regarding the LENS  
Do not let the LENS point toward the sun.  
Direct sunlight can damage the CCD  
(Charge Coupled Device).  
4
ENGLISH  
Notices a nd Sa fety Instructions  
Notices regarding electronic viewfinder  
1) Do not place the camcorder so that the  
viewfinder is pointing towards the sun.  
Direct sunlight can damage the inside of the  
viewfinder. Be careful when placing the  
camcorder under sunlight or by a window.  
2) Do not pick up the camcorder by the viewfinder.  
3) Unintended rotation may cause damage to the  
viewfinder.  
2
3
1
Notices regarding moisture condensation  
1) A sudden rise in atmospheric temperature may cause condensation to  
form inside the camcorder.  
for example:  
When you take the camcorder from cold temperature outside to  
warm temperature inside during the winter.  
When you take the camcorder from cool temperature inside to  
hot temperature outside during the summer.  
2) If the “DEW” protection feature is activated, leave the camcorder in a  
dry, warm room with the cassette compartment opened and the battery  
removed.  
3) If the “DEW” protection feature is activated unexpectedly,  
and you want to override it, detach, then reinstall the battery pack  
and lithium battery.  
DEW  
Please make sure that the condensation has disappeared  
completely. (see page 71)  
5
ENGLISH  
Notices a nd Sa fety Instructions  
Notices regarding the battery pack  
Make sure that the battery pack is charged before recording outdoors.  
To preserve battery power, keep your camcorder turned off when you are not operating it.  
When your camcorder is in CAMERA mode, if it is left in STANDBY for more than 5 minutes without operation,  
it will automatically turn off to protect against unexpected battery discharge.  
It is a good idea to use the viewfinder instead of the LCD when recording for a long time because the LCD uses  
more battery power.  
Make sure that the battery pack is fitted firmly into place.  
Dropping the battery pack might damage it.  
When the battery reaches the end of its life, please contact your local dealer.  
The batteries have to be dealt with as chemical waste.  
Notices regarding the Lithium battery  
Warning: Keep the LITHIUM BATTERY out of the reach of children. Should the battery be swallowed,  
consult a doctor immediately.  
The lithium battery maintains the clock function, TITLE, CUSTOM function and preset contents memory;  
even if the battery pack or AC power adapter is removed.  
The lithium battery for the camcorder lasts about 8~10 months under normal operation from time of installation.  
When the lithium battery becomes weak or dead, the date/time indicator flashes about 5 seconds when  
you set the power switch to CAMERA. In this case, replace the lithium battery with type CR2025. (see page 21)  
* When the lithium battery  
becomes weak or dead please  
contact your local dealer. The  
batteries have to be dealt with  
as chemical waste.  
WARNING:  
LITHIUM BATTERY MUST BE  
RECYCLED OR DISPOSED  
OF PROPERLY.  
6
ENGLISH  
Notices a nd Sa fety Instructions  
Notices with Recording or Playback by using LCD  
1) The LCD monitor is manufactured by using high precision technology.  
However, there may be some tiny specks (red, blue or green in color)  
that appear on the LCD monitor. These specks are normal and do not  
affect the recorded picture in any way.  
2) When using the LCD monitor outdoors in direct sunlight,  
it may be difficult to view. If this occurs, use the viewfinder.  
3) The LCD monitor's OSD is turned off when the LCD is placed in the  
forward direction.  
Notices regarding the hand strap  
It is very important to adjust the hand strap for better recording.  
(see page 20)  
Do not insert your hand in the hand strap forcibly,  
the buckle may be damaged.  
Notices regarding video head cleaning  
To ensure normal recording and clear picture, clean the video heads. When playing back the pictures,  
if they are noisy or hardly visible, the video heads may be dirty. If this happens, clean the video heads with a dry  
type cassette cleaner.  
Do not use a wet type cassette cleaner. It may damage the video heads. (see page 66)  
5 minutes off timer in STANDBY mode  
To protect against tape and head-drum wear, your camcorder will automatically turn off if it is left in STANDBY  
mode without operation for more than 5 minutes.  
7
ENGLISH  
Notices a nd Sa fety Instructions  
Safety Instructions  
This symbol is intended to alert the user to the presence of uninsulated  
dangerous voltage within the product’s enclosure that may be of sufficient  
magnitude to constitute a risk of fire or electric shock.  
CAUTION  
RISK OF ELECTRIC SHOCK  
DO NOT OPEN  
CAUTION:  
TO REDUCE THE RISK OF ELECTRIC  
SHOCK, DO NOT REMOVE COVER(OR  
BACK). NO USER SERVICEABLE PARTS  
INSIDE, REFER SERVICING TO  
This symbol is intended to alert the user to the presence of important  
operating and maintenance instructions in the literature accompanying  
this product.  
QUALIFIED SERVICE PERSONNEL.  
To prevent electric shock, match wide  
blade of plug to wide slot and fully  
insert.  
1. READ INSTRUCTIONS:  
7. WATER AND MOISTURE:  
All the safety and operating instructions should be read  
before the CAMCORDER is operated.  
Do not use this CAMCORDER near water;  
for example, near a bathtub, wash bowl, kitchen sink, laundry  
tub, in a wet basement, near a swimming pool or lake.  
2. RETAIN INSTRUCTIONS:  
The safety and operating instructions should be retained  
for future reference.  
8. ACCESSORIES:  
Do not place this CAMCORDER on an unstable cart, stand,  
tripod, bracket or table.  
3. HEED WARNINGS:  
All warnings on the CAMCORDER and in the operating  
instructions should be adhered to.  
The CAMCORDER may fall, causing serious injury to a child  
or adult, and serious damage to the unit.  
Use only with a cart, stand, tripod, bracket, or table  
recommended by the manufacturer or sold with the  
CAMCORDER. Any mounting of the unit should follow the  
manufacturer’s instructions and should use a mounting  
accessory recommended by the manufacturer.  
4. FOLLOW INSTRUCTIONS:  
All operating and maintenance instructions should  
be followed.  
5. CLEANING:  
Unplug this CAMCORDER from the wall outlet before  
cleaning. Do not use liquid or aerosol cleaners.  
Use a dry cloth used for dusting cabinets.  
A. An appliance and cart combination  
should be moved with care.  
Quick stops, excessive force and uneven surfaces may  
cause the appliance and cart combination to overturn.  
PORTABLE CART WARNING  
6. ATTACHMENTS:  
Do not use attachments not recommended by the  
CAMCORDER product manufacturer as they may be  
hazardous.  
(Symbol provided by RETAC)  
8
ENGLISH  
Notices a nd Sa fety Instructions  
9. VENTILATION:  
13. OUTDOOR ANTENNA GROUNDING:  
Slots and openings in the cabinet are provided for  
ventilation to ensure reliable operation of  
the CAMCORDER and to protect it from overheating.  
These openings must not be blocked or covered.  
Never place your CAMCORDER on a bed, sofa, rug, or  
other similar surface: on or near a radiator or heat  
register.  
This CAMCORDER should not be placed in a built-in  
installation such as a bookcase or rack unless  
proper ventilation is provided or the manufacturer’s  
instructions have been adhered to.  
If an outside antenna or cable system is connected to the  
CAMCORDER, be sure the antenna or cable system is  
grounded to provide some protection against voltage  
surges and built-up static charges, Section 810 of the  
National Electrical Code, ANSI/NFPA No. 70-1984,  
provides information with respect to proper grounding of  
the mast and supporting structure, grounding of the  
lead-in wire and supporting structure, grounding of the  
mast and supporting structure, grounding of the lead-in  
wire to an antenna discharge unit, size of grounding to  
conductors, location of antenna-discharge unit, connection  
to grounding electrodes and requirements for the  
grounding electrode.  
10. POWER SOURCES:  
The CAMCORDER should be operated only from the type  
of power source indicated on the label.  
If you are not sure of the type of power supply at your  
home, consult your appliance dealer or local power  
company.  
See figure below.  
A CAMCORDER is intended to be operated from battery  
power, or other sources, refer to the operating instructions.  
ANTENNA  
LEAD IN  
WIRE  
GROUND  
CLAMP  
11.GROUNDING OR POLARIZATION:  
ANTENNA  
This CAMCORDER may be equipped with either a  
polarized 2-wire AC line plug (a plug having one blade  
wider than the other) or a 3-wire grounding type plug,  
a plug having a third (grounding) pin.  
If you are unable to insert the plug fully into the outlet,  
try reversing the plug. If the plug still fails to fit,  
contact your electrician to replace your outlet.  
Do not defeat the safety purpose of the polarized plug.  
DISCHARGE UNIT  
(NEC SECTION 810-20)  
ELECTRIC  
SERVICE  
GROUNDING CONDUCTORS  
EQUIPMENT  
(NEC SECTION 810-21)  
GROUND CLAMPS  
POWER SERVICE GROUNDING  
ELECTRODE SYSTEM  
(NEC ART 250, PART H)  
NEC NATIONAL ELECTRICAL CODE  
12. POWER-CORD PROTECTION:  
Power-supply cords should be routed so that they are not  
likely to be walked on or pinched by items placed upon or  
against them, paying particular attention to cords or plugs,  
convenient receptacles, and the point where they exit from  
the unit.  
9
ENGLISH  
Notices a nd Sa fety Instructions  
14. LIGHTNING:  
19. DAMAGE REQUIRING SERVICE:  
For added protection of this CAMCORDER during a  
lightning storm or when it is left unattended and unused  
for long periods of time, unplug it from the wall outlet and  
disconnect the antenna or cable system.  
This will prevent damage to the CAMCORDER due to  
lightning and power-line surges.  
Unplug this CAMCORDER from the wall outlet and  
refer servicing to qualified service personnel under the  
following conditions:  
a. When the power-supply cord or plug is damaged.  
b. If any liquid has been spilled onto, or objects have  
fallen into the CAMCORDER.  
15. POWER LINES:  
c. If the CAMCORDER has been exposed to rain or water.  
d. If the CAMCORDER does not operate normally by  
following the operating instructions, adjust only those  
controls that are covered by the operating instructions.  
Improper adjustment of other controls may result in  
damage and will often require extensive work by a  
qualified technician to restore the CAMCORDER to its  
normal operation.  
An outside antenna system should not be located in the  
vicinity of overhead power lines or other electric light or  
power circuits where it can fall into such power lines or  
circuits.  
When installing an outside antenna system, extreme care  
should be taken to keep from touching such power lines  
or circuits as contact with them might be fatal.  
e.If the CAMCORDER has been dropped or the cabinet  
has been damaged.  
f. When the CAMCORDER exhibits a distinct change in  
performance, this indicates a need for service.  
16. OVERLOADING:  
Do not overload wall outlets and extension cords as this  
can result in a risk of fire or electric shock.  
17. OBJECTS AND LIQUIDS:  
20. REPLACEMENT PARTS:  
Never push objects of any kind into this CAMCORDER  
through openings as they may touch dangerous voltage  
points or short out a part that could result in a fire or  
electric shock.  
Never spill liquids of any kind onto the CAMCORDER.  
Should spillage occur, unplug uni and have it checked by  
a technician before use.  
When replacement parts are required, be sure the service  
technician has used replacement parts specified by the  
manufacturer and having the same characteristics as the  
original part.  
Unauthorized substitutions may result in fire,  
electric shock or other hazards.  
21. SAFETY CHECK:  
18. SERVICING:  
Upon completion of any service or repairs to this  
CAMCORDER, ask the service technician to perform  
safety checks to determine that the CAMCORDER is  
in safe operating order.  
Do not attempt to service this CAMCORDER yourself.  
Opening or removing covers may expose you to  
dangerous voltage or other hazards.  
Refer all servicing to qualified service personnel.  
10  
ENGLISH  
Notices a nd Sa fety Instructions  
NOTE TO CATV SYSTEM INSTALLER:  
This reminder is provided to call the CATV system installer’s  
attention to Article 820-40 of the NEC that provides guidelines  
for proper grounding and, in particular, specifies that the  
cable ground shall be connected to the grounding system of  
the building as close to the point of cable entry as practical.  
USER INSTALLER CAUTION:  
Your authority to operate this FCC certified equipment could  
be voided if you make changes or modifications not expressly  
approved by this party responsible for compliance to part 15  
FCC rules.  
11  
ENGLISH  
Getting to Know Your Ca m cord er  
Features  
Your camcorder has many features for recording and playing back.  
Snap Shot (SCL750/L770 only)  
The Snap Shot function lets you record an object at a standstill for a limited time in Camera mode. (see page 52)  
PIP (SCL750/L770 only)  
The PIP function shows where the center of the image is while recording in Digital Zoom of the Camera mode. (see page 51)  
BLC  
When you record a subject with the light source behind the subject or a subject with a light background,  
use the BLC function. (see page 41)  
DSE (Digital Special Effects)  
The DSE enables you to give a creative look to your films by adding various special effects. (see page 44)  
Program AE (Auto Exposure)  
The Program AE enables you to adapt the shutter speed and aperture to the type of scene to be filmed. (see page 42)  
DIS (SCL750/L770 only)  
The DIS compensates for unstable images caused by hand shake, particularly at high magnification. (see page 39)  
22x High ratio zoom lens  
Zooming is a recording technique that lets you change the size of the subject in the picture.  
For more professional recordings, use the zoom function. (see page 34)  
Digital Zoom (880x)  
Zooms more than 22x are performed digitally. (see page 35)  
Macro  
The macro function allows you to record your subject at close range.  
You have to adjust the zoom fully wide for macro recording. (see page 34)  
EASY  
This mode enables even the beginner to easily make a recording. (see page 37)  
Multi PLAYBACK (PAL60)  
PAL60 is a special output signal format with which a tape recorded on this camcorder (NTSC format) can be viewed  
on a PAL TV.  
Hi8  
Hi8 is an enhanced 8mm format.  
When a Hi8 cassette is inserted, the camcorder will automatically select the Hi-8 format for record or playback.  
12  
ENGLISH  
Getting to Know Your Ca m cord er  
Front View  
3. REC SEARCH  
(REW)  
4. REC SEARCH  
(FF)  
2. PLAY/STILL (LIGHT)  
5. DATE/TIME (STOP)  
7. EVF  
6. TAPE EJECT  
13. VIDEO LIGHT  
1. LENS  
9. Remote Sensor  
10. LCD  
8. MIC  
11. CUSTOM  
12. EASY  
1. Lens (see page 72)  
6. TAPE EJECT (see page 26)  
Use when ejecting the tape.  
2. PLAY/STILL (LIGHT) (see page 58)  
PLAY/STILL works in PLAYER mode.  
LIGHT works in CAMERA mode.  
7. EVF (Electronic Viewfinder)  
8. MIC  
3. REC SEARCH  
(REW)  
MIC works in CAMERA mode.  
REC SEARCH  
works in STANDBY mode. (see page 28)  
9. Remote Sensor (SCL710/L750/L770 only)  
10. LCD (see page 29)  
REW works in PLAYER mode. (see page 59)  
4. REC SEARCH  
(FF)  
REC SEARCH  
works in STANDBY mode. (see page 28)  
11. CUSTOM  
FF works in PLAYER mode. (see page 59)  
CUSTOM works in CAMERA mode.  
5. DATE/TIME (STOP)  
12. EASY  
DATE/TIME works in CAMERA mode.  
(see page 47)  
EASY works in CAMERA mode.  
STOP works in PLAYER mode. (see page 58)  
13. VIDEO LIGHT (SCL700/L750/L770 only)  
13  
ENGLISH  
Getting to Know Your Ca m cord er  
Side View  
24. BLC  
14. MENU ON/OFF  
23. FADE  
15. ENTER (MF)  
16. UP/DOWN Dial (VOLUME)  
20. SPEAKER  
22. LCD Open  
17. S-VIDEO out  
18. P.AE  
19. DSE  
21. Lithium Battery  
14. MENU ON/OFF (see page 30)  
MENU ON/OFF works in CAMERA and  
PLAYER mode.  
19. DSE (see page 44)  
DSE works in CAMERA and PLAYER mode.  
20. SPEAKER (see page 60)  
15. ENTER (MF) (see page 30)  
ENTER works in MENU mode.  
Speaker works in PLAYER mode.  
21. Lithium Battery (see page 21)  
22. LCD open  
MF works in CAMERA mode. (see page 40)  
16. UP/DOWN dial (VOLUME)  
UP/DOWN dial works in MENU mode. (see page 30)  
VOLUME works in PLAYER mode. (see page 60)  
23. FADE (see page 50)  
FADE works in CAMERA mode.  
17. S-VIDEO out  
24. BLC (see page 41)  
18. PROGRAM AE (see page 42)  
PROGRAM AE (Auto Exposure) works in  
CAMERA mode.  
BLC works in CAMERA mode  
14  
ENGLISH  
Getting to Know Your Ca m cord er  
Rear View  
25. ZOOM  
26. CASSETTE  
Compartment  
36. BATTERY EJECT  
27. Hooks for shoulder strap  
37. SNAP SHOT/D.ZOOM  
28. AUDIO/VIDEO Out  
39. USB JACK (SCL770 only)  
MIC  
32. START/STOP  
33. External MIC  
35. Battery Pack Compartment  
(SCL750/L770 only)  
29. LENS Cap  
38. Recharging Indicator  
34. DC Jack  
30. Hand Strap  
31. POWER Switch  
25. ZOOM (see page 34)  
33. External MIC (SCL750/L770 only) (see page 72)  
34. DC Jack (see page 22)  
26. Cassette Compartment  
27. Hooks for Shoulder Strap (see page 21)  
28. AUDIO/VIDEO out (see page 57)  
29. LENS Cap  
35. Battery Pack Compartment (see page 23)  
36. BATTERY EJECT  
37. SNAP SHOT/D.ZOOM  
SNAP SHOT works in CAMERA mode.  
(SCL750/L770 only, see page 52)  
D.ZOOM works in CAMERA mode.  
(SCL700/L710 only, see page 36)  
30. Hand Strap (see page 20)  
31. POWER Switch (see page 22)  
- CAMERA : Select to record.  
- OFF : Select to turn off the camcorder.  
- PLAYER : Select to playback.  
38. Recharging Indicator (see page 23)  
39. USB Jack (SCL770 only) (see page 65)  
32. START/STOP (see page 28)  
15  
START/STOP works in CAMERA mode.  
ENGLISH  
Getting to Know Your Ca m cord er  
OSD (On Screen Display)  
You can turn the OSD on/off by setting the Display menu on/off.  
The TITLE, DATE/TIME, EASY and CUSTOM functions can be operated even after the OSD is turned off.  
The OSD is displayed in the viewfinder and the LCD monitor.  
a. Zoom position (see page 34)  
OSD in CAMERA mode  
Indicates zoom position.  
b. DIS (SCL750/L770 only)  
(see page 39)  
r
b a  
t
s q  
Indicates DIS is activated.  
p
o
x
z
Hi8  
x
REC  
0:00:00  
EASY  
c
c. Battery level (see page 25)  
880  
W
T
CINEMA  
m
f
n
XX  
Indicates the power left in the battery.  
OFF  
(
)
TITLE  
BLC  
e
d
y
g
h
k
d. Manual Focus (see page 40)  
Indicates manual focus is on.  
Auto Focus is not displayed.  
WAIT-10S  
SELF-30S  
12:00 AM  
AUG. 29, 2002  
j
i
e. BLC (see page 41)  
Indicates BLC is activated.  
f. Program AE (see page 42)  
OSD in PLAYER mode  
Indicates Program AE mode is  
activated. (  
,
,
,
,
)
r q  
g. Self record waiting timer.  
(SCL710/L750/L770 only) (see page 19)  
Indicates 10 second timer.  
c
p
o
u
Hi8  
PLAY  
0:00:25  
Z.RTN  
CINEMA  
TITLE  
TAPE!  
h. Self record recording timer.  
(SCL710/L750/L770 only) (see page 19)  
(30 seconds or END).  
v
l
w
VOLUME  
i. Date (see page 46)  
Indicates the date of the recording.  
16  
ENGLISH  
Getting to Know Your Ca m cord er  
OSD (On Screen Display)  
j. Time (see page 46)  
Indicates the time you are recording.  
k. Title (see page 48)  
Indicates the recorded title you have set.  
It is superimposed on the scene.  
l. Self diagnosis (see page 68)  
Displays different diagnostic indicators concerning the camcorder’s operation.  
m. DSE (Digital Special Effect) (see page 44)  
Indicates the DSE mode is activated.  
The operation modes are GHOST, STROBE, SEPIA, B&W, NEG., MIRROR, ART, MOSAIC, 16:9(WIDE) and CINEMA.  
n. White Balance mode (see page 53)  
Indicates the White Balance mode is activated.  
The White Balance modes are AUTO, INDOOR(  
) and OUTDOOR(  
).  
o. Tape counter  
Indicates amount of the tape used.  
p. Operation mode  
Indicates the operation mode is activated.  
The operation modes are STBY, REC , STOP, PLAY(  
), FF(  
), REW(  
), EJECT.  
q. Hi8 (see page 58)  
Indicates you are using Hi8 tape when recording or playing back.  
r. DEW(  
) condensation (see page 71)  
Monitors the moisture condensation.  
s. Digital zoom (see page 35)  
Indicates digital zoom is activated.  
t. Snap Shot (see page 52)  
Indicates the time left during Snap Shot Recording.  
u. Zero return (SCL710/L750/L770 only) (see page 59)  
Indicates that the zero return is activated.  
v. PB DSE  
Shows that the PB DSE mode is active.  
w. VOLUME  
x. EASY & CUSTOM  
Shows when the easy or custom mode is active.  
y. LIGHT (SCL700/L750/L770 only)  
Shows when the Light is switched on.  
z. Remocon (  
OFF) (SCL710/L750/L770 only)  
Indicates the remocon off mode is activated.  
17  
ENGLISH  
Getting to Know Your Ca m cord er  
Accessories Supplied with Camcorder  
Make sure that the following basic accessories are  
1. AC Power Adapter  
2. AC cord  
3. Battery Pack  
supplied with your camcorder.  
Basic Accessories  
1. AC Power Adapter. (see page 22)  
2. AC cord. (see page 22)  
AD44-00038A  
AD39-00028A  
AD43-00065A  
3. Battery Pack. (see page 23)  
4. Audio/Video Cable. (see page 57)  
5. Shoulder strap. (see page 21)  
6. Instruction Book.  
6. Instruction Book  
4. AUDIO/VIDEO Cable 5. Shoulder Strap  
Video Camcorder  
8mm  
COLOR LCD  
7. Remote Control. (see page 19)  
(SCL710/L750/L770 only)  
AD39-40200A  
AD63-00202A  
8. Lithium Battery for Remote Control.  
(see page 19) (SCL710/L750/L770 only)  
Lithium Battery for Clock.  
7. Remote Control  
8. Lithium Batteries  
9. Software CD  
(TYPE: CR2025, see page 21)  
9. Software CD (SCL770 only)  
10. USB Cable (SCL770 only)  
11. USB AUDIO Cable (SCL770 only)  
AD59-00062A  
AD43-10130H  
AD46-00033B  
10. USB Cable  
11. USB AUDIO Cable  
AD39-00073A  
AD39-00074A  
Optional Accessories  
12. S-VIDEO cable  
12. S-VIDEO cable. (see page 58)  
AC39-42001Z  
18  
ENGLISH  
Getting to Know Your Ca m cord er  
Remote Control (SCL710/L750/L770 only)  
Description of Buttons  
1. Start/Stop (see page 27)  
2. Self Timer  
3. Still (see page 59)  
4. WIDE (see page 34)  
5. TELE (see page 34)  
6. Display (see page 16)  
3
6
11  
START/  
COUNTER  
RESET  
WIDE  
STOP DISPLAY  
4
5
12  
1
2
8
9
7
SELF  
TIMER  
ZERO  
RETURN  
STILL  
TELE  
7.  
8.  
9.  
10.  
(Play) (see page 58)  
(FF) (see page 59)  
(REW) (see page 59)  
(Stop) (see page 58)  
10  
11. Counter Reset (see page 59)  
12. Zero Return (see page 59)  
Remote Control Battery Installation  
You must insert or replace this battery when:  
-
-
You purchase the camcorder.  
The remote control doesn’t work.  
Insert Lithium Battery, following the + and - markings.  
Be careful not to reverse the polarity of the battery.  
Self Timer Recording  
The Self Timer function on the remote control allows you to start and  
stop recording automatically.  
Example: recording yourself  
Two options are available  
-
-
WAIT-10S/SELF-30S: wait 10 seconds, followed by 30 seconds of recording.  
WAIT-10S/SELF-END: wait 10 seconds, followed by recording until you press the  
START/STOP button again.  
19  
ENGLISH  
Prep a ring  
1. Set power switch to CAMERA mode.  
1
CAMERA  
2. Press Self Timer button until the appropriate indicator is  
displayed on the LCD:  
START/  
COUNTER  
RESET  
WIDE  
STOP DISPLAY  
2
3
SELF  
TIMER  
ZERO  
RETURN  
STILL  
TELE  
WAIT-10S/SELF-30S  
WAIT-10S/SELF-END  
WAIT-10S  
SELF-30S  
3. Press START/STOP button to start the timer.  
: After waiting for 10 seconds, recording starts.  
: If you have selected SELF-30S, recording stops automatically  
after 30 seconds.  
START/  
STOP DISPLAY  
COUNTER  
RESET  
WIDE  
SELF  
TIMER  
ZERO  
RETURN  
STILL  
TELE  
: If you have selected SELF-END, press START/STOP again  
when you wish to stop recording.  
Note: When recording with the timer, you can press START/STOP button again to cancel the function.  
Adjusting the Hand Strap and Shoulder Strap  
Hand Strap  
It is very important to adjust the hand strap for better recording.  
The hand strap enables you to:  
-
-
Hold the camcorder in a stable, comfortable position.  
Press the Zoom and the red Record button without  
having to change the position of your hand.  
1. Pull open the Hand Strap cover and release the Hand Strap,  
adjust its length and stick it back onto the Hand Strap cover.  
2. Close the Hand Strap cover back up again.  
20  
ENGLISH  
Prep a ring  
Shoulder Strap  
The Shoulder Strap allows you to carry your camcorder with complete safety.  
1. Insert each end of the strap into the hooks on the camcorder.  
2. Put the end of each strap through the buckle, adjust the length  
of the strap, then pull it tight in the buckle .  
Lithium Battery Installation  
The lithium battery maintains the clock function, title and preset contents of the memory; even if the battery pack or  
AC power adapter is removed.  
The lithium battery for the camcorder lasts about 8~10 months under normal operation from the time of installation.  
When the lithium battery becomes weak or dead, the date/time indicator flashes for about 5 seconds when you set  
the power switch to CAMERA.  
When this occurs, replace the lithium battery with type CR2025.  
1. Take out the holder from the lithium battery compartment.  
2. Insert the side of the lithium battery toward the bottom  
of the holder.  
3. Reinsert the holder into the lithium battery compartment.  
Note: If the holder is inserted in the wrong direction,  
it will not fit correctly.  
Warning: Keep the LITHIUM BATTERY out of the reach of  
the children.  
Should the battery be swallowed, consult a doctor  
immediately.  
21  
ENGLISH  
Prep a ring  
Connecting the Power Source  
There are two ways to connect power source.  
-
-
Using the AC Power Adapter : used for indoor recording.  
Using the Battery Pack: used for outdoor recording.  
To use the AC Power Adapter  
1
2
CAMERA  
3
1. Connect the AC Power Adapter to the AC cord.  
2. Connect the AC cord to a wall socket.  
Note: The plug and wall socket type may be different depending on regional conditions.  
3. Connect the other end of the DC cable to DC jack of the camcorder.  
4. To set the camcorder to the CAMERA mode.  
a. Hold down the tab of the power switch and push the switch to CAMERA mode.  
b. Make sure that the Lens Cap is open.  
c. Open the LCD monitor and make sure that the image appears in the LCD monitor.  
-
The LCD monitor is turned on automatically when it’s opened more than 30 degrees.  
Note: If the adapter is used next to a TV or the camcorder,  
it may cause the TV or camcorder to emit noise.  
Move the adapter away from the TV, camcorder or the antenna cable.  
22  
ENGLISH  
Prep a ring  
To use the Battery Pack  
How long will the battery last for recording?  
Depends on how often zoom is used in recording. Prepare as many battery packs as possible.  
Recharging the Battery Pack  
1. Attach the battery pack to the camcorder.  
1
2
4
3
2. Connect the AC Power Adapter to the AC cord  
and connect the AC cord to a wall socket.  
3. Connect the DC cable to the DC jack of the camcorder.  
4. Turn off the camcorder power, and the recharging indicator  
will start blinking and begin recharging.  
-
Blinking once a second : Indicates less than  
50% has been charged.  
OFF  
-
Blinking twice a second : Indicates 50% ~ 75%  
has been recharged.  
-
-
-
Blinking three times a second : Indicates 75% ~ 100% has been recharged.  
Blinking stops and stays on : Recharging has been completed.  
On for a second and off for a second: Indicates there is an error. Reset the battery pack and DC cable.  
5. If recharging is completed, separate the camcorder, AC power adapter, and battery pack.  
Even if the power is turned off, battery will be discharged.  
Note: Battery pack may be charged a little at the time of purchase.  
23  
ENGLISH  
Prep a ring  
Using the Battery Pack  
Continuous recording time table based on model and battery type.  
SCL750/L770  
SCL700/L710  
Model  
Battery  
Type  
LCD ON,  
EVF OFF  
LCD OFF,  
EVF ON  
LCD ON,  
EVF OFF  
LCD OFF,  
EVF ON  
Approximately  
90 minutes  
Approximately  
130 minutes  
Approximately  
80 minutes  
Approximately  
120 minutes  
SB-L110A  
Approximately  
130 minutes  
Approximately  
190 minutes  
Approximately  
120 minutes  
Approximately  
160 minutes  
SB-L160  
SB-L320  
Approximately  
260 minutes  
Approximately  
390 minutes  
Approximately  
240 minutes  
Approximately  
340 minutes  
The continuous recording times given in the table are approximate.  
Actual recording time depends on usage.  
Notes:  
The battery pack should be recharged in a room temperature that is between 0°C(32°F) and 40°C(104°F).  
It should never be charged in a room temperature that is below 0°C(32°F).  
The life and capacity of the battery pack will be reduced if it is used in temperatures below 0°C,  
even when it is fully recharged.  
The life and capacity of the battery pack will be reduced if the battery pack is left in temperatures above  
40°C(104°F) for a long period, even when it is fully recharged.  
Do not put the battery pack near any heat source (fire or flames, for example).  
24  
ENGLISH  
Prep a ring  
Battery Level Display  
The battery level display indicates the amount of power remaining  
in the battery pack.  
1
2
3
1. Fully charged  
2. 10~40% consumed  
3. 40~60% consumed  
4. 60~80% consumed  
(prepare a charged one)  
5. 80~95% consumed  
4
5
(change the battery)  
6. 100% consumed  
6
(camcorder will turn off soon, change the battery as soon as possible)  
Please refer to the table on page 24 for approximate continuous recording times.  
The recording time is affected by environmental temperature and conditions.  
The recording time becomes very short in a cold environment. The continuous recording time in the operating  
instructions is measured under the condition of using a fully charged battery pack at 25°C(77°F).  
As the environmental temperature and conditions may be different when you actually use the camcorder,  
the remaining battery time may not be the same as the approximate continuous recording times given  
in these instructions.  
Tips for Battery Identification.  
A charge mark is provided on the battery pack to help you remember whether it  
has been charged or not.  
Two colors are provided (red and black)-you may choose which one indicates charged  
and which indicates discharged.  
Note: The charge mark does not affect the battery’s charge status.  
25  
ENGLISH  
Prep a ring  
Inserting and Ejecting a Cassette  
There are several cassette types, depending on:  
-
-
-
Color system used  
Recording/playback time.  
Hi8  
Inserting and Ejecting a Cassette  
TAPE  
EJECT  
2
1
Check to see if the battery pack is in place or the AC adapter is  
connected.  
1. Press the EJECT button.  
-
-
The compartment opens automatically.  
Insert the cassette with the transparent window facing outward  
and the protection tab toward the top.  
PUSH  
2. Press the PUSH mark until the compartment clicks into place.  
a.  
b.  
Note: When you have recorded a cassette that you wish to keep,  
you can protect it from being accidentally erased.  
a. Recording Impossible (Protection):  
Push the red tab on the cassette to cover up the opening.  
b. Recording possible:  
If you no longer wish to keep the recording on the cassette,  
push the red tab back so that it no longer covers up the opening.  
26  
ENGLISH  
Ba sic Record ing  
Making Your First Recording  
Please make these preparations before recording.  
Did you connect a power source?  
(Battery Pack or AC Power Adapter)  
BATTERY  
Did you set the power switch to CAMERA position?  
CAMERA  
Did you insert a cassette? (see page 26)  
Open the LCD monitor and make sure that STANDBY is displayed in the OSD  
(if the red tab of the cassette is opened, STANDBY will not be displayed)  
Did you open the LENS CAP?  
Make sure the image you want to record appears in the LCD monitor.  
Make sure the battery level indicates that there is enough remaining power for recording. (see page 25)  
We recommend that beginners, who are using the camcorder for the first time,  
switch the EASY mode on. (see page 37)  
REC  
X:XX:XX  
a. To start recording, press the red START/STOP button.  
Recording starts and REC should be displayed on the LCD.  
27  
ENGLISH  
Ba sic Record ing  
b. To stop recording, press the red START/STOP button  
STBY  
again.  
Y:YY:YY  
When Recording stops, STANDBY should be displayed  
on the LCD.  
When a cassette is loaded and the camcorder is left in STANDBY mode for over 5 minutes without being used,  
it will turn off automatically. To use it again, push the red START/STOP button or set the power switch to OFF and  
then back to CAMERA. This Auto Power Off feature is designed to save battery power and to protect the Head Drum  
and tape.  
REC SEARCH  
You can view a recorded picture with the REC SEARCH  
in STANDBY mode. REC SEARCH allows you to reverse and  
REC SEARCH allows you to forward, for as long as you keep pressing.  
,
function  
REC SEARCH  
,
If you press the REC SEARCH  
button briefly in STANDBY mode,  
your camcorder will play back in reverse for 3 seconds and return to  
the original position automatically.  
REC SEARCH  
Press briefly)  
(
28  
ENGLISH  
Ba sic Record ing  
Hints for Stable Image Recording  
While recording, it is very important to hold the camcorder correctly.  
For stable recording, fix the LENS cap firmly by clipping it on the hand strap.  
(refer to figure)  
Recording with the LCD monitor  
1. Hold the camcorder firmly using the hand strap. (see page 20)  
2. Place your right elbow against your side.  
3. Place your left hand under or next to the LCD to support and adjust it.  
Do not touch the built-in microphone.  
4. Choose a comfortable, stable position for the shots that you are taking.  
You can lean against a wall or on a table for greater stability.  
Do not forget to breathe gently.  
5. Use the LCD frame as a guide to determine the horizontal plane.  
6. Whenever possible, use a tripod.  
Recording with the Viewfinder  
1. Hold the camcorder firmly with the hand strap. (see page 20)  
2. Place your right elbow against your side.  
3. Place your left hand under the camcorder to support it.  
Do not touch the built-in microphone.  
4. Choose a comfortable, stable position for the shots.  
You can lean against a wall or on a table for greater stability.  
Do not forget to breathe gently.  
5. Put your eye firmly against the eyecap.  
6. Use the viewfinder frame as a guide to determine the horizontal plane.  
7. Whenever possible, use a tripod.  
29  
ENGLISH  
Ba sic Record ing  
Adjusting the LCD  
Your camcorder is equipped with a 2.5 inch color Liquid Crystal Display (LCD) screen, which allows you to view  
recording or playback directly.  
Depending on the conditions in which you are using the camcorder (indoors or outdoors for example),  
you can adjust:  
Brightness  
Color  
MENU  
LCD ADJUST  
DIS ..............................OFF  
D.ZOOM ......................OFF  
PIP ..............................OFF  
DISPLAY......................ON  
WHITE BAL..................AUTO  
WL REMOCON............ON  
1. Make sure that the battery pack is in place.  
2. Set the power switch to CAMERA mode. (see page 22)  
NEXT: MENU  
3. Open the LCD monitor, then the LCD will turn on.  
4. Press the MENU ON/OFF button, the MENU list will be displayed.  
MENU  
LCD ADJUST  
DIS ..............................OFF  
D.ZOOM ......................OFF  
PIP ..............................OFF  
DISPLAY......................ON  
WHITE BAL..................AUTO  
WL REMOCON............ON  
5. Turn the UP/DOWN dial to LCD ADJUST.  
NEXT: MENU  
LCD ADJUST  
[17]  
BRIGHT  
COLOR  
[17]  
6. Press ENTER.  
EXIT: MENU  
The LCD ADJUST MENU will be displayed.  
LCD ADJUST  
[20]  
BRIGHT  
COLOR  
[17]  
7. Turn the UP/DOWN dial to adjust the LCD brightness.  
EXIT: MENU  
LCD ADJUST  
[20]  
BRIGHT  
COLOR  
[19]  
8. Press ENTER.  
The cursor will move to the next item.  
EXIT: MENU  
30  
ENGLISH  
Ba sic Record ing  
9. Turn the UP/DOWN dial to adjust the LCD color setting.  
10. Press ENTER.  
For further adjustment, repeat steps 7, 8, 9.  
11. Press the MENU ON/OFF button to end the setting.  
Notes: If you don't press a button within 30 seconds, the setting will disappear.  
The MENU ON/OFF function will not operate in EASY mode.  
Adjusting Focus of the VIEWFINDER  
Focus:  
Use the focus adjustment knob of the VIEWFINDER to focus the picture.  
31  
ENGLISH  
Ba sic Record ing  
Playing back a tape on the LCD  
You can monitor the playback picture on the LCD monitor.  
Make sure that the battery pack is in place.  
1. Hold down the tab of the power switch and push the switch to  
PLAYER mode.  
1
2
3
PLAYER  
2. Insert the tape you have just recorded.  
PUSH  
3. Open the LCD monitor and make sure that STOP is displayed on the OSD.  
Adjust the angle of the LCD monitor and set the brightness or the color  
if necessary.  
4
5
4. Press the  
(REW) button to rewind the tape to the beginning.  
STOP  
REW  
To stop REWIND, press the (STOP) button.  
Camcorder stops automatically after rewinding.  
5. Press the  
(PLAY/STILL) button to start playback.  
You can see the video you recorded on the LCD.  
To stop the PLAY operation, press the (STOP) button.  
PLAY/  
STILL  
STOP  
Note: You can also monitor the picture on a TV screen,  
after connecting the camcorder to a TV or VCR. (see page 57)  
32  
ENGLISH  
Ba sic Record ing  
Adjusting the LCD during PLAY  
The LCD adjustment method in PLAYER mode is identical to step number 4 of page 30, except the power switch must  
be set to PLAYER.  
Controlling the Sound from the Speaker  
When you use the LCD monitor while playing back,  
you can hear sound from the Speaker.  
Volume of the Speaker is controlled by the UP/DOWN dial tab  
on the camcorder.  
If you close the LCD monitor, the LCD monitor and Speaker are  
turned off.  
If the speaker does not work properly, check the following:  
Is the LCD monitor closed?  
Is the volume adjusted to a low level?  
Is the speaker off? (see page 60)  
Notes: Lower the volume if vibration from the built-in speaker  
causes screen disturbance.  
PLAY/STILL  
Volume display will automatically disappear 2 seconds  
after adjusting.  
Viewing a Still Picture  
Press  
(PLAY/STILL) button during playback.  
To resume playback, press the  
again.  
(PLAY/STILL) button  
FF  
REW  
Picture Search  
Keep pressing  
To resume normal playback, release the button.  
(FF) or  
(REW) button during playback.  
33  
ENGLISH  
Ad va nced Record ing  
Zooming In and Out  
Zoom works in CAMERA mode only.  
Zooming is a recording technique that lets you change the size of the subject in the picture. For more professional  
looking recordings, do not use the zoom function too often.  
You can also choose from two zoom speeds to suit different needs :  
Gradual zoom (9~12 seconds from TELE/WIDE to WIDE/TELE)  
High-Speed zoom (3~6 seconds from TELE/WIDE to WIDE/TELE)  
Use these features for different shots; please note that overuse of the zoom feature can lead to unprofessional  
looking results and a reduction of battery pack usage time.  
T
1. Move the zoom lever a little for a gradual zoom,  
move it further for a high-speed zoom.  
W
Your zooming is monitored on the OSD.  
2. T (Telephoto) side:  
Subject appears closer.  
3. W (Wide angle) side:  
Subject appears further away.  
Note: MACRO  
If you cannot get a sharp focus in telephoto zoom, move the lever to the “W” side until the focus is sharp.  
You can record a subject that is at least 1 mm away from the lens surface in the wide angle position.  
34  
ENGLISH  
Ad va nced Record ing  
Digital Zoom  
Digital Zoom works in CAMERA mode only.  
Zooms more than 22x are performed digitally.  
The picture quality deteriorates as you go towards the “T” side.  
We recommend that you use the DIS (SCL750/L770) feature with the DIGITAL ZOOM for picture stability.  
(see page 39)  
W
T
MENU  
W
x
T
880  
LCD ADJUST  
DIS........................ON  
D.ZOOM ..............ON  
PIP........................OFF  
DISPLAY ..............ON  
WHITE BAL ..........AUTO  
WL REMOCON ....ON  
NEXT: MENU  
1. Set the power switch to CAMERA mode. (see page 22)  
Open the LCD monitor and adjust the LCD monitor so as to see comfortably.  
2. Make sure that the DIGITAL ZOOM feature is on. (see page 36)  
3. When you move the ZOOM lever to the “T” side, the picture will be enlarged  
within 22x minimum to 880x maximum ZOOM.  
W
x
T
880  
3
T
This is the DIGITAL ZOOM boundary.  
W
T
x
880  
shows the digital zoom area  
shows the optical zoom area  
4. If you do not want to use the DIGITAL ZOOM, set the DIGITAL ZOOM function to OFF in the MENU list.  
(see page 36)  
35  
ENGLISH  
Ad va nced Record ing  
Setting the DIGITAL ZOOM ON/OFF (SCL750/L770 only)  
The DIGITAL ZOOM feature is explained on page 35.  
1. Set the power switch to CAMERA mode. (see page 22)  
MENU  
LCD ADJUST  
DIS........................OFF  
D.ZOOM ..............OFF  
PIP........................OFF  
DISPLAY ..............ON  
WHITE BAL ..........AUTO  
WL REMOCON ....ON  
2. Press the MENU ON/OFF button.  
The MENU list will appear.  
NEXT: MENU  
MENU  
LCD ADJUST  
DIS........................OFF  
D.ZOOM ..............OFF  
PIP........................OFF  
DISPLAY ..............ON  
WHITE BAL ..........AUTO  
WL REMOCON ....ON  
3. Turn the UP/DOWN dial to D. ZOOM.  
NEXT: MENU  
MENU  
4. Press ENTER.  
The DIGITAL ZOOM setting will change.  
LCD ADJUST  
DIS........................OFF  
D.ZOOM ..............ON  
PIP........................OFF  
DISPLAY ..............ON  
WHITE BAL ..........AUTO  
WL REMOCON ....ON  
5. Press the MENU ON/OFF button to end setting.  
NEXT: MENU  
Setting the DIGITAL ZOOM ON/OFF (SCL700/L710 only)  
1. Set the power switch to CAMERA mode.  
2. Press D. ZOOM ON/OFF button.  
W
x
T
880  
D.ZOOM  
The DIGITAL ZOOM indicators will be displayed on the screen,  
and DIGITAL ZOOM function will operate.  
3. To deactivate the DIGITAL ZOOM function, press the D.ZOOM button again.  
The DIGITAL ZOOM indicators disappear from the screen.  
Note: The D.ZOOM ON/OFF function will not operate in EASY mode.  
36  
ENGLISH  
Ad va nced Record ing  
EASY Mode (for Beginners)  
Even a beginner can easily make a recording using the EASY mode.  
The EASY mode only operates in CAMERA mode.  
1. Set the power switch to CAMERA mode (see page 22).  
2. By pressing the EASY button, all the functions of the camera will be  
set to off and the recording settings will be set to the following basic mode.  
Battery level, recording mode, counter, date/time,  
STBY  
X:XX:XX  
EASY  
DIS (  
) will be displayed as the camcorder starts to run.  
The word “EASY” will appear on the LCD at the same time.  
However, the Date/Time will only be seen if it has been  
previously set.  
JAN. 31, 2002  
(DIS (  
) will be displayed on SCL750/L770 only)  
3. Press the START/STOP button to start recording.  
Recording will begin using the basic automatic environment settings.  
4. Pressing the EASY button again turns the EASY mode off.  
The camera will return to the settings that were set prior to  
the EASY mode being switched on.  
Note: The Easy mode settings are stored in the camera (provided a good lithium battery has been installed).  
37  
ENGLISH  
Ad va nced Record ing  
CUSTOM-Creating your own customized recording settings  
You can customize the settings and save them for future use.  
The CUSTOM function only operates in CAMERA mode.  
MENU  
LCD ADJUST  
DIS........................OFF  
D.ZOOM ..............OFF  
PIP........................OFF  
DISPLAY ..............ON  
WHITE BAL ..........AUTO  
WL REMOCON ....ON  
1. Set the power switch to CAMERA mode.  
2. Press the MENU ON/OFF button, to bring up the MENU list.  
3. Turn the UP/DOWN dial until CUSTOM SET is highlighted.  
NEXT: MENU  
MENU  
4. Press the ENTER button, the CUSTOM menu will appear.  
Set the status of each item to what you want.  
CUSTOM SET  
CLOCK SET  
TITLE SET  
TITLE ..................OFF  
D/TITLE COLOR..WHITE  
C.RESET..............0:00:00  
DEMO ..................OFF  
5. To exit the menu, press the MENU ON/OFF button twice.  
6. By pressing the CUSTOM button, the Custom settings will come up.  
Date/Time and Title will only appear if these have been  
set in advance. (see page 46)  
CUSTOM SETTING  
DIS ......................ON  
PIP ......................OFF  
D.ZOOM ..............OFF  
WHITE BAL..........AUTO  
DATE/TIME ..........OFF  
TITLE ..................OFF  
PROGRAM AE ....AUTO  
DSE SELECT ......OFF  
The word “CUSTOM” will be displayed on the LCD at the same time.  
Example: When the CUSTOM SET is set as follows;  
CUSTOM SETTING  
DIS ......................ON  
STBY  
-0:00:03  
EXIT: MENU  
PIP ......................ON  
D.ZOOM ..............ON  
WHITE BAL..........INDOOR  
DATE/TIME ..........DATE/TIME  
TITLE ..................CONTINUE  
PROGRAM AE ....  
880x  
SEPIA  
CUSTOM  
Pressing the CUSTOM button,  
displays  
CONGRATULATIONS  
TITLE  
12:00 AM  
DSE SELECT ......SEPIA  
CONTINUE  
JAN.1,2002  
EXIT: MENU  
7. Press the START/STOP button to start recording.  
Recording will begin using the new CUSTOM settings.  
8. To switch Custom off, press the CUSTOM button once.  
The camera will revert to the settings that were set prior to the CUSTOM mode being switched on.  
Notes:  
In CUSTOM mode, the DIS and PIP functions are not available.  
If you want to use these, you must first switch the EASY or CUSTOM mode off.  
The CUSTOM settings will be stored in the camera (provided a good lithium battery has been installed).  
38  
ENGLISH  
Ad va nced Record ing  
DIS (Digital Image Stabilizer, SCL750/L770 only)  
The DIS function works in CAMERA mode only.  
DIS (Digital Image Stabilizer) is a handshake compensation function that compensates for any shaking or moving  
of the hand holding the camcorder (within reasonable limits).  
It provides more stable pictures when:  
Recording in the Zoom In mode  
Recording a small object close-up  
Recording and walking at the same time  
Recording through the window of a vehicle  
1. Set the power switch to CAMERA mode. (See page 22)  
Open the LCD monitor and adjust it to see comfortably.  
LCD ADJUST  
DIS........................OFF  
D.ZOOM ..............OFF  
PIP........................OFF  
DISPLAY ..............ON  
WHITE BAL ..........AUTO  
WL REMOCON ....ON  
2. Press the MENU ON/OFF button.  
The MENU list will appear.  
NEXT: MENU  
3. Turn the UP/DOWN dial to DIS.  
LCD ADJUST  
DIS........................OFF  
D.ZOOM ..............OFF  
PIP........................OFF  
DISPLAY ..............ON  
WHITE BAL ..........AUTO  
WL REMOCON ....ON  
4. Press ENTER.  
The DIS setting will change.  
5. Press the MENU ON/OFF button to end the setting.  
NEXT: MENU  
(
)
When the DIS is set, the DIS mark  
will be displayed on the OSD.  
LCD ADJUST  
DIS........................ON  
D.ZOOM ..............OFF  
PIP........................OFF  
DISPLAY ..............ON  
WHITE BAL ..........AUTO  
WL REMOCON ....ON  
Notes: 1. It is recommended you deactivate the handshake compensation  
function when using a tripod.  
2. The DIS function will not operate in the DSE mode.  
3. The MENU ON/OFF function will not operate in EASY mode.  
NEXT: MENU  
39  
ENGLISH  
Ad va nced Record ing  
MF/AF (Manual Focus/Auto Focus)  
The MF/AF function works in the CAMERA mode only.  
In most situations, it is better to use the Automatic Focus feature, as it enables you to concentrate on the creative  
side of your recording.  
Manual focusing may be necessary under certain conditions that make automatic focusing inadequate.  
Auto Focusing  
The AF (Auto Focus) mode is set automatically when you switch on the Power switch.  
If you are inexperienced with camcorders, we recommend that you use  
the Auto Focus mode.  
Manual Focusing  
In the following situations, you should obtain better results by adjusting  
the focus manually.  
a. A picture containing several objects, some close to the camcorder,  
others further away.  
b. A person enveloped in fog or surrounded by snow.  
c. Very shiny or glossy surfaces like a car.  
d. People or objects moving constantly or quickly like an athlete or crowd.  
1. Set the power switch to CAMERA mode. (see page 22)  
2. Press the MF button.  
MF icon will appear in display.  
3. Zoom in the subject to be recorded by pushing the ZOOM tab to the “T” side.  
40  
ENGLISH  
Ad va nced Record ing  
4. Turn the UP/DOWN dial up or down until the object is focused.  
5. You will obtain a sharp picture after zooming out.  
6. To return to AF(Auto Focus), press the MF button again.  
MF icon will disappear.  
Note: The MF function will not operate in EASY mode.  
BLC  
BLC works in the CAMERA mode.  
* BLC on  
* BLC off  
Back lighting exists when the subject is darker than the background:  
-
-
The subject is placed in front of a window.  
The person to be recorded is wearing white or shiny  
clothes and is placed against a bright background;  
the person’s face is too dark to distinguish their features.  
The subject is outdoors and the background is overcast.  
The light sources are too bright.  
-
-
-
The subject is against a snowy background.  
1. Set the power switch to CAMERA mode. (see page 22)  
2. Press BLC button.  
Normal - BLC - Normal  
BLC enhances only the subject.  
Note: BLC function will not operate in P.AE or EASY mode.  
41  
ENGLISH  
Ad va nced Record ing  
PROGRAM AE (Automatic Exposure)  
The PROGRAM AE function works in the CAMERA mode only.  
The PROGRAM AE modes allow you to adjust shutter speeds and aperture to suit different recording conditions.  
They give you creative control over the depth of the field.  
There are 6 automatic exposure modes.  
1. AUTO mode  
Auto balance between the subject and the background.  
To be used in normal conditions.  
The shutter speed automatically varies from 1/60 to 1/250 second, depending on the picture.  
2. SPORTS mode (  
)
For recording people or objects moving quickly; you should able to play back the picture in slow motion on an  
8 mm VCR or stop on a given image with very little blur.  
3. PORTRAIT mode (  
)
For focusing on the background of the subject, the background being out of focus.  
The PORTRAIT mode is most effective when used outdoors.  
The shutter speed automatically varies from 1/60 to 1/1000 second, depending on the picture.  
4. SPOTLIGHT mode (  
)
To record correctly when there is only light on the subject and not the rest of the picture.  
The shutter speed is 1/60 second.  
5. SAND/SNOW mode (  
)
For recording when the people or objects are darker than the background because of reflected light from sand  
or snow.  
The shutter speed automatically varies from 1/60 to 1/250 second, depending on the picture.  
6. HSS (High Speed Shutter) mode (  
)
For recording fast-moving subjects such as the players in golf or tennis games.  
You may need to light the recording area.  
42  
ENGLISH  
Ad va nced Record ing  
Setting the PROGRAM AE(Automatic Exposure) mode  
1. Set the power switch to CAMERA mode.  
STBY  
2. Press the P.AE button, the (  
) symbol will be displayed.  
0:00:00  
JAN.31,2002  
3. Press the P.AE button until the appropriate symbol is displayed.  
(
)
No Display : Full Auto mode.  
Notes:  
The P.AE mode chosen will be recorded on the tape.  
To end the P.AE function, press the P.AE button once or several times,  
until the P.AE Icon is no longer displayed.  
The P.AE function will not operate in EASY mode.  
The BLC function will not operate in P.AE mode.  
43  
ENGLISH  
Ad va nced Record ing  
DSE (Digital Special Effects) in CAMERA mode  
The digital effects enable you to give a creative look to your recording by adding various special  
effects.  
Select the appropriate digital effect for the type of picture that you wish to record.  
There are several DSE modes.  
(SCL700/L710: 8 modes, SCL750/L770: 10 modes)  
1
2
4
1. Normal picture.  
2. GHOST: This mode gives the image a dragging effect.  
(SCL750/L770 only)  
3. STROBE: This mode works by inserting a cutting effect on the image.  
There are 50 fields in a normal recorded picture. (SCL750/L770 only)  
4. SEPIA: This mode gives the image a SEPIA effect.  
5. B&W(Black & White): This mode allows the image to be recorded in black  
and white.  
3
5
6
8
6. NEG.(Negative): This mode allows images to be recorded by reflecting the  
color of the image.  
7. MIRROR: This mode cuts the image in half, using the mirror effect.  
8. ART: Adds a paint-like effect, called solarization, to the image.  
9. MOSAIC: This mode gives the image a checkered design.  
10. 16:9(WIDE): This mode provides a 16:9(WIDE) television display.  
11. CINEMA: This mode covers the upper/lower portion of the screen to give a  
movie-like effect.  
7
10  
9
Notes: DIS, PIP functions will not operate in DSE mode.  
DSE function will not operate in EASY or CUSTOM mode.  
11  
44  
ENGLISH  
Ad va nced Record ing  
Selecting and recording DSE effects  
1. Set the power switch to CAMERA mode.  
STBY  
X:XX:XX  
GHOST  
2. Press the DSE button, GHOST or SEPIA will be displayed.  
3. Keep pressing the DSE button, until the desired mode is  
displayed.  
4. Press the START/STOP button to start recording.  
5. To exit the DSE functions, press the DSE button once or several  
times until no DSE mode is displayed on the LCD.  
Notes:  
It is recommended that you set the DSE mode in STBY mode.  
DSE functions will not operate in EASY or CUSTOM mode.  
45  
ENGLISH  
Ad va nced Record ing  
Setting and Recording the DATE/TIME  
Setting and recording the date/time feature works in the CAMERA mode only.  
You can record the date/time on your tapes, so you will know when it was made. The date and time are recorded  
whenever they are displayed on the viewfinder or LCD.  
Setting a DATE/TIME  
Setting the DATE/TIME is possible in CAMERA STANDBY mode only.  
MENU  
1. Make sure that you have installed the LITHIUM BATTERY. (see page 21)  
The LITHIUM BATTERY is needed to maintain the clock.  
LCD ADJUST  
DIS........................OFF  
D.ZOOM ..............OFF  
PIP........................OFF  
DISPLAY ..............ON  
WHITE BAL ..........AUTO  
WL REMOCON ....ON  
2. Set the power switch to CAMERA mode. (see page 22)  
NEXT: MENU  
3. Press the MENU ON/OFF button, then the MENU list will appear.  
MENU  
CUSTOM SET  
CLOCK SET  
TITLE SET  
TITLE....................OFF  
D/TITLE COLOR ..WHITE  
C.RESET ..............0:00:00  
DEMO ..................OFF  
4. Turn the UP/DOWN dial until CLOCK SET is highlighted.  
NEXT: MENU  
CLOCK SETTING  
12:00 AM  
JAN. 1, 2002  
5. Press ENTER.  
EXIT: MENU  
CLOCK SETTING is possible when the DATE and TIME appear.  
BLINKING indicates the possible changes for the setting.  
The year will be the first to blink.  
CLOCK SETTING  
12:00 AM  
JAN. 1, 2005  
6. Turn the UP/DOWN dial to set the desired year.  
EXIT: MENU  
46  
ENGLISH  
Ad va nced Record ing  
7. Press ENTER.  
CLOCK SETTING  
The month to be reset will blink.  
12:00 AM  
JAN. 1, 2005  
EXIT: MENU  
8. Turn the UP/DOWN dial to set the desired month.  
CLOCK SETTING  
12:00 AM  
FEB. 1, 2005  
9. Press ENTER.  
EXIT: MENU  
The day to be reset will blink.  
CLOCK SETTING  
10. You can set the day, hour and minute following the same procedure  
used for setting the year and month.  
12:00 AM  
FEB. 1, 2005  
EXIT: MENU  
11. Press ENTER after setting the minute and the clock setting screen will  
disappear. The selected date and time will then be displayed.  
Recording the DATE/TIME  
1. Make sure that you have set the DATE/TIME.  
2. Set the power switch to CAMERA mode. (see page 22)  
Open the LCD monitor and adjust it to see comfortably.  
3. Press the DATE/TIME button the required number of times.  
To record the date only, press the DATE/TIME button once.  
To record the date and time, press the DATE/TIME button twice.  
4. Press the START/STOP button to record the DATE/TIME on your recording.  
Notes:  
If your date and time settings are not maintained in the camcorder,  
it means the installed LITHIUM BATTERY is discharged. (see page 21)  
You cannot conceal the recorded date or time during playback.  
The DATE/TIME function cannot be turned off in EASY or CUSTOM mode.  
47  
ENGLISH  
Ad va nced Record ing  
Selecting and Recording a Title  
Selecting and recording a TITLE is possible in the CAMERA mode only.  
The TITLE feature allows you to select a preset title stored in the camcorder’s memory.  
You can also select the language of the titles.  
Selecting a Language and Setting a Title  
Selecting a language is possible in CAMERA STANDBY mode only.  
The factory default language is ENGLISH.  
You can change the language.  
1. Make sure that you have installed the LITHIUM BATTERY or have the AC adapter attached. (see page 21)  
2. Set the power switch to CAMERA mode. (see page 22)  
Open the LCD monitor and adjust it to see comfortably.  
3. Press the MENU ON/OFF button. The MENU list will appear.  
MENU  
LCD ADJUST  
DIS........................OFF  
D.ZOOM ..............OFF  
PIP........................OFF  
DISPLAY ..............ON  
WHITE BAL ..........AUTO  
WL REMOCON ....ON  
EXIT: MENU  
4. Turn the UP/DOWN dial until TITLE SET is highlighted.  
MENU  
CUSTOM SET  
CLOCK SET  
TITLE SET  
TITLE....................OFF  
D/TITLE COLOR ..WHITE  
C.RESET ..............0:00:00  
DEMO ..................OFF  
EXIT: MENU  
5. Press ENTER.  
A list of available languages will appear.  
LANGUAGE SELECT  
ENGLISH [HAVING FUN]  
FRENCH  
GERMAN  
ITALIAN  
SPANISH  
RUSSIAN  
EXIT: MENU  
48  
ENGLISH  
Ad va nced Record ing  
6. Turn the UP/DOWN dial to select the appropriate language.  
ENGLISH [HAVING FUN]  
FRENCH  
You may select languages from ENGLISH/FRENCH/  
GERMAN/ITALIAN/SPANISH/RUSSIAN.  
GERMAN  
ITALIAN  
SPANISH  
RUSSIAN  
7. Press ENTER.  
Then, the title list in the language you chose will appear.  
8. Turn UP/DOWN dial to whichever TITLE you desire.  
ANNIVERSARY  
CONGRATULATIONS  
GRADUATION  
HAPPY BIRTHDAY  
HAPPY NEW YEAR  
HAVING FUN  
9. Press ENTER.  
The selected title will appear on the screen for  
2 ~ 3 seconds and will disappear. At the same,  
the camcorder will return to the menu mode.  
MENU  
Recording a Title  
CUSTOM SET  
CLOCK SET  
Note:  
Make sure that you have selected a TITLE from  
the TITLE list.  
TITLE SET  
TITLE...................CONTINUE  
D/TITLE COLOR ..WHITE  
C.RESET ..............0:00:00  
DEMO ..................OFF  
1. Set power switch to CAMERA mode.  
EXIT: MENU  
Open the LCD monitor and adjust it to see comfortably.  
2. Press MENU.  
3. Turn the UP/DOWN dial until TITLE........OFF is highlighted.  
4. Press ENTER to choose between OFF, AUTO-10S and CONTINUE.  
5. Press START/STOP button to record the title with your picture.  
If you want to change TITLE recording time, select title recording time (OFF, AUTO-10S, CONTINUE) on MENU.  
Notes: The title moves horizontally from the right side to the left side 10 seconds after you turn on the title.  
MENU ON/OFF function will not operate in EASY or REC mode.  
49  
ENGLISH  
Ad va nced Record ing  
Fade In and Out  
The FADE function works in CAMERA mode only.  
You can give your films a professional look by using special  
effects such as fading in and out at the beginning or end of a  
sequence.  
STBY  
0:00:00  
To Start Recording  
1. Before recording, hold down the FADE button.  
The picture and sound gradually disappear (fade out).  
REC  
0:00:15  
2. Press the START/STOP button and at the same time release  
the FADE button.  
Recording starts and the picture and sound gradually appear  
(fade in).  
REC  
0:00:15  
To Stop Recording (using FADE IN / FADE OUT)  
3. When you wish to stop recording, hold down the FADE button.  
The picture and sound gradually disappear (fade out).  
STBY  
0:00:15  
4. When the picture has disappeared,  
press the START/STOP button to stop recording.  
Press the FADE button  
a. FADE OUT  
Gradual disappearance  
a. FADE OUT  
(Approx. 4 seconds)  
b. FADE IN  
(Approx. 4 seconds)  
Gradual appearance  
b. FADE IN  
Release the FADE button  
50  
ENGLISH  
Ad va nced Record ing  
PIP (Picture-In-Picture, SCL750/L770 only)  
The PIP(Picture-In-Picture) feature works in combination with the DIGITAL ZOOM function by using a small,  
superimposed screen to show an image that is wider than the image being recorded.  
This should help you to get a more clear idea of what you are recording.  
-
The PIP function works in CAMERA mode only.  
1. Set the power switch to CAMERA mode.  
2. Turn on DIGITAL ZOOM. (see page 35)  
CAMERA  
3. Press the MENU ON/OFF button, the MENU List  
will be displayed.  
MENU  
4. Turn the UP/DOWN dial until PIP..........OFF is highlighted.  
LCD ADJUST  
DIS........................OFF  
D.ZOOM ..............OFF  
PIP........................OFF  
DISPLAY ..............ON  
WHITE BAL ..........AUTO  
WL REMOCON ....ON  
5. Press ENTER, PIP ON and a small screen  
should appear.  
EXIT: MENU  
6. Check which part you are recording on the PIP screen, and turn the  
Zoom button to “T” position to activate the DIGITAL ZOOM mode.  
ENTER  
Start recording by pressing the START/STOP button  
when the portion you want to record appears.  
MENU  
LCD ADJUST  
DIS........................OFF  
D.ZOOM ..............OFF  
PIP........................ON  
DISPLAY ..............ON  
WHITE BAL ..........AUTO  
WL REMOCON ....ON  
7. Setting PIP......ON to OFF in the MENU will make the small  
screen disappear and switch the PIP mode off.  
EXIT: MENU  
Notes: When you use the PIP function while making a recording,  
the PIP screen will be recorded on the Tape.  
The MENU ON/OFF function will not operate in EASY mode.  
PIP function will not operate in DSE mode.  
51  
ENGLISH  
Ad va nced Record ing  
Snap Shot (SCL750/L770 only)  
With the SNAP SHOT feature, your camcorder functions like a regular film camera,  
allowing you to take single still pictures.  
-
The SNAP SHOT function operates in the CAMERA mode.  
1. Set the power switch to CAMERA mode.  
CAMERA  
2. Aim the Camera at the image you want to record and  
press the SNAP SHOT button.  
At this time, be careful not to shake your camcorder because the  
image will be blurred.  
SNAP SHOT  
3. After the SNAP SHOT button has been pressed,  
your camcorder will record the still image for 6 seconds,  
then automatically return to STANDBY mode.  
You can check the remaining time for SNAP SHOT recording by  
looking at the time displayed on the screen.  
To stop SNAP SHOT recording, press the SNAP SHOT button  
again.  
SNAP SHOT  
Notes:  
If the camcorder is knocked or shaken while taking a SNAP SHOT, the image may be blurred.  
The SNAP SHOT function will not operate in MENU mode.  
SNAP SHOT function will not operate in DSE mode.  
52  
ENGLISH  
Ad va nced Record ing  
White Balance  
WHITE BALANCE is a recording function that preserves the unique color of the object in any recording condition.  
You may select the appropriate WHITE BALANCE mode to obtain good image color quality.  
-
-
-
AUTO: This mode is generally used to control the WHITE BALANCE automatically.  
INDOOR (  
): Controls WHITE BALANCE according to the indoor ambience.  
OUTDOOR (  
): Controls WHITE BALANCE according to the outdoor ambience.  
Setting a White Balance Mode  
1. Set the power switch to CAMERA mode.  
2. Press the MENU ON/OFF button, then the MENU list will appear.  
MENU  
LCD ADJUST  
3. Turn the UP/DOWN dial until  
DIS........................OFF  
D.ZOOM ..............OFF  
PIP........................OFF  
DISPLAY ..............ON  
WHITE BAL ..........AUTO  
WL REMOCON ....ON  
WHITE BAL. .......AUTO is highlighted.  
EXIT: MENU  
MENU  
LCD ADJUST  
DIS........................OFF  
D.ZOOM ..............OFF  
PIP........................OFF  
DISPLAY ..............ON  
WHITE BAL ..........AUTO  
WL REMOCON ....ON  
4. Press ENTER.  
You can set it to INDOOR or OUTDOOR  
by pressing the ENTER button.  
EXIT: MENU  
MENU  
LCD ADJUST  
DIS........................OFF  
D.ZOOM ..............OFF  
PIP........................OFF  
DISPLAY ..............ON  
WHITE BAL ..........OUTDOOR  
WL REMOCON ....ON  
5. Press the MENU ON/OFF button to exit  
the WHITE BALANCE setting screen.  
EXIT: MENU  
Note: The MENU ON/OFF function will not operate in EASY or REC mode.  
53  
ENGLISH  
Ad va nced Record ing  
Demonstration  
Demonstration automatically shows you the major functions that are included with your camcorder so that  
you may use them more easily.  
The DEMO function is only available in CAMERA mode when tape is not in the camcorder.  
The Demonstration operates repeatedly until the POWER switch is set to OFF.  
1. Set the power switch to CAMERA mode.  
2. Press the MENU ON/OFF button, then the MENU list will appear.  
MENU  
LCD ADJUST  
DIS........................OFF  
D.ZOOM ..............OFF  
PIP........................OFF  
DISPLAY ..............ON  
WHITE BAL ..........AUTO  
WL REMOCON ....ON  
3. Turn the UP/DOWN dial so that DEMO is highlighted.  
EXIT: MENU  
MENU  
CUSTOM SET  
CLOCK SET  
TITLE SET  
TITLE....................OFF  
D/TITLE COLOR ..WHITE  
C.RESET..............0:00:00  
DEMO ..................OFF  
4. Press ENTER to select ON.  
Demonstration will start.  
EXIT: MENU  
SAMSUNG  
5. Set the POWER switch to OFF to end the Demonstration.  
DEMONSTRATION  
Note: The MENU ON/OFF function will not operate in EASY or REC mode.  
54  
ENGLISH  
Ad va nced Record ing  
Setting the Date/Title Color  
1. Set the power switch to CAMERA mode. (see page 22)  
MENU  
LCD ADJUST  
2. Press the MENU ON/OFF button.  
DIS........................OFF  
D.ZOOM ..............OFF  
PIP........................OFF  
DISPLAY ..............ON  
WHITE BAL ..........AUTO  
WL REMOCON ....ON  
The MENU list will appear.  
NEXT: MENU  
3. Turn the UP/DOWN dial to D/TITLE COLOR.......WHITE.  
MENU  
CUSTOM SET  
CLOCK SET  
TITLE SET  
TITLE....................OFF  
D/TITLE COLOR ..WHITE  
C.RESET ..............0:00:00  
DEMO ..................OFF  
EXIT: MENU  
4. Press ENTER.  
A list of available colors will appear.  
DATE/TITLE COLOR SELECT  
[WHITE]  
WHITE  
YELLOW  
CYAN  
MAGENTA  
RED  
GREEN  
BLUE  
5. Turn the UP/DOWN dial to select the appropriate color.  
6. Press ENTER.  
EXIT: MENU  
DATE/TITLE COLOR SELECT  
[YELLOW]  
WHITE  
YELLOW  
CYAN  
MAGENTA  
RED  
GREEN  
BLUE  
EXIT: MENU  
7. Press the MENU ON/OFF button to end setting.  
The title and Date/time will appear in the color you chose.  
55  
ENGLISH  
Ad va nced Record ing  
Lighting Techniques  
When you use your camcorder, there are only two possible recording environments.  
-
-
You will be recording outdoors (Normal recording or through an ND(Neutral Density) filter).  
You will be recording indoors (Video light recommended or required).  
The single greatest influence on picture quality is the level of brightness, measured in lux.  
The following table lists a few common situations, the corresponding level of brightness and any associated  
recommendations.  
Situations  
Brightness (lux)  
Recommendations  
Snow-covered mountains or fields.  
Sandy beach on a hot summer’s day.  
On a sunny day in the middle of the afternoon.  
On a gloomy day, an hour after the sunrise.  
Office with fluorescent lighting near  
to a window.  
100,000  
100,000  
35,000  
2,000  
ND filter recommended.  
²
Normal recording.  
²
²
1,000  
On a sunny day, an hour before the sunset.  
Department store counter.  
Room lit by two 30W fluorescent lights.  
1,000  
500 to 700  
300  
²
²
Video light recommended.  
Arcade at night.  
Candle light.  
150 to 200  
10 to 15  
Video light required.  
²
After Recording  
1. Eject the tape that you have recorded. (see page 26)  
2. If you want to protect accidental erasure of the tape you have recorded, push the red tab on the cas-  
sette.  
3. Set the POWER switch to OFF.  
4. Close the LENS cover.  
5. Remove the BATTERY PACK from the camcorder.  
56  
ENGLISH  
Pla ying b a ck a Ta p e  
To view a tape that you have recorded.  
Playback function works in PLAYER mode only.  
There are two ways to see a tape;  
To watch with LCD: recommended for outdoor use.  
To watch with TV monitor: recommended for indoor use.  
To watch with LCD  
To view a tape using the LCD monitor. (see page 32)  
To watch with TV monitor  
It is practical to use a TV monitor to view tapes indoors.  
To play a tape back, the TV must feature a compatible color system. (see page 67)  
Connecting to a TV which has an Audio and Video input jack  
Use the Audio/Video cable supplied with your camcorder.  
The yellow plug: Video  
The white plug: Audio(L)  
Connecting to a TV which has no Audio and Video input jack  
You can connect your camcorder to a TV through a VCR.  
Set the input selector on the VCR to LINE.  
The yellow plug: Video  
The white plug: Audio(L)  
Note: To view the cassette on the television screen,  
select the channel reserved for your VCR on the television.  
(Refer to your VCR or television instruction book)  
57  
ENGLISH  
Pla ying b a ck a Ta p e  
Notes:  
SCL700/L710/L750/L770 feature a monaural audio system. If your TV or VCR are stereo,  
connect the audio cable to input “L” of your TV or VCR.  
You can use an S-VIDEO cable to obtain better quality pictures if you have an S-VIDEO connector on your TV.  
While playing back on a TV screen, close the LCD panel. Otherwise, picture distortion may occur.  
Playback  
1. Use the TV/VIDEO button to select VIDEO on your TV.  
2. Connect power source (battery or AC Power Adapter) to the camcorder.  
Set the power switch to PLAYER mode.  
3. Insert a tape you want to see.  
Make sure that STOP is displayed.  
PLAYER  
4. Press the  
(PLAY/STILL) button.  
The picture you recorded appears on the TV after 2 to 3 seconds.  
Press (STOP) to stop playing.  
If the tape reaches its end during playback,  
the tape will rewind automatically.  
PLAY/STILL  
Notes:  
Vibration from the built-in speaker can cause picture distortion.  
It is best to turn the built-in speaker off when your camcorder is connected to the TV.  
The system (Hi8/8mm) is selected automatically, depending on the tape format.  
This camcorder does not support LP recording and playback.  
58  
ENGLISH  
Pla ying b a ck a Ta p e  
Various Functions in PLAYER mode  
To view a STILL picture (Playback pause)  
PLAY/STILL  
-
-
Press  
(PLAY/STILL) button during playback.  
(PLAY/STILL) button again.  
To resume playback, press  
Note: Your camcorder will automatically stop if it is left for more than  
5 minutes in STILL mode without operation in order to  
prevent tape and head-drum wear.  
FF  
REW  
To locate a scene (picture search)  
-
Press  
(FF) or  
(REW) buttons during playback.  
To resume normal playback, release the buttons.  
Zero RETURN (SCL710/L750/L770 only)  
The ZERO RETURN function works in STOP of PLAYER mode.  
You can Fast Forward or Rewind to 0:00:00 automatically.  
START/  
STOP DISPLAY  
COUNTER  
RESET  
WIDE  
1. Set the power switch to PLAYER mode.  
Make sure that STOP is displayed.  
2. Press the ZERO RETURN button.  
SELF  
TIMER  
ZERO  
RETURN  
STILL  
TELE  
Z.RETURN is displayed.  
FF or REW works automatically.  
Notes:  
The ZERO RETURN button does not work when the TAPE COUNTER reads 0:00:00.  
Set the COUNTER RESET to “C.RESET 0:00:00” in MENU mode at the start of the cassette or the required  
sequence.  
When you wish to find this point on the tape again, press Z.RETURN button when playback is stopped.  
59  
ENGLISH  
Pla ying b a ck a Ta p e  
Adjusting the LCD  
The LCD control in PLAYER mode is identical to step 3 of page 30, except the power switch must be  
set to PLAYER mode.  
Setting the Speaker ON/OFF  
The speaker is turned ON/OFF by opening/closing the LCD.  
The speaker ON/OFF setting operates when the LCD is opened.  
When it is set to OFF, the speaker won’t turn on even after opening  
the LCD.  
MENU  
LCD ADJUST  
SPEAKER ............ON  
DISPLAY ..............ON  
PAL CONV. ..........OFF  
WL.REMOCON ....ON  
C.RESET ..............0:00:00  
EXIT: MENU  
1. Set the power switch to PLAYER mode.  
2. Press the MENU ON/OFF button,  
then the MENU list will appear.  
MENU  
LCD ADJUST  
SPEAKER ............OFF  
DISPLAY ..............ON  
PAL CONV. ..........OFF  
WL.REMOCON ....ON  
C.RESET ..............0:00:00  
3. Turn the UP/DOWN dial to SPEAKER.  
4. Press ENTER to switch the selection.  
5. Press the MENU ON/OFF button again to end the SPEAKER setting.  
EXIT: MENU  
Volume control  
Speaker volume can be controlled by turning  
the MENU dial during playback.  
Note: When the MENU list is on, volume will not be changed.  
DSE in PLAYER mode  
The procedure for using DSE in PLAYER mode is the same as the procedure for using DSE in CAMERA mode,  
except that the power switch must be set to PLAYER instead of CAMERA. Please refer to pages 44 and 45.  
Note: The GHOST, STROBE, NEG., MIRROR, MOSAIC, CINEMA and 16:9(WIDE) effects will not operate when your  
camcorder is in PLAYER mode.  
Pressing the DSE button will scroll through the available settings.  
Stop at the one you require.  
60  
ENGLISH  
Pla y in g b a ck th e Ta p e  
Multi Playback (using the PAL60 System)  
This Camcorder can convert an NTSC tape recorded in the SP mode to the “PAL60” format,  
allowing you to view it on a PAL TV which has Vertical sync adjustment circuitry for 60Hz.  
- “PAL60” is a special output signal format with which a PAL TV can be used to view a tape recorded  
by an NTSC recorder.  
1. Set POWER switch to PLAYER mode.  
2. Insert an NTSC tape you want to see.  
3. Press MENU ON/OFF button, then the MENU list will appear.  
4. Turn the UP/DOWN dial to “PAL CONV. .....OFF”  
5. Press ENTER, then it will change to “PAL CONV. .....PAL60”  
Now you can see the picture by pressing the PLAY button.  
6. Press MENU ON/OFF button to end setting.  
Notes: 1. This Camcorder can not record using the “PAL60” system.  
2. When an NTSC tape is being played back, the picture on the PAL monitor screen may shrink in  
the Vertical direction.  
3. If the signal recorded on the tape is in bad condition, the PAL60 playback system may malfunction.  
4. A PAL recorded tape can not be played back on this camcorder.  
61  
ENGLISH  
USB interfa ce (SCL7 7 0 only)  
Transferring a Digital Image through a USB Connection  
You can easily transfer a still image from a camera, tape, memory to a PC without additional add-on cards  
via a USB connection.  
If you transfer data to a PC, you need to install the software (Driver, Editing software) supplied with the  
camcorder.  
System Requirements  
CPU : Intel® Pentium IITM processor compatible or better  
Operating system : Windows® 98/98SE/ME/2000/XP  
RAM : 64 MB or more  
CD-ROM: 4x CD-ROM drive  
VIDEO : 65,000-color or better video display card  
Available USB port  
Hard Disc : 4GB (8GB recommended)  
Reference  
Intel® Pentium IITM is a trademark of the Intel Corporation.  
Windows® is a registered trademark of the Microsoft® Corporation.  
All other brands and names are property of their respective owners.  
62  
ENGLISH  
USB interfa ce (SCL7 7 0 only)  
Installing USB Media 2.0 Program  
Do not connect the camcorder to PC before installing the program.  
If another camera or scanner is connected, please disconnect it in advance.  
This explanation is based on Windows® 98SE OS.  
How to install the program  
1. The install program automatically operate when the CD is inserted into CD-ROM.  
Reference  
If the install program does not operate, please double click Install.exe in CD-ROM Drive.  
2. Click  
to install the program.  
3. Follow the instruction to install.  
63  
ENGLISH  
USB interfa ce (SCL7 7 0 only)  
4. The below window displays the folder to install the program.  
4.  
Basically the program is installed in the following folder.  
C:\Programfiles\Samsung\USB Media 2.0  
Click  
to change the folder.  
5. Connect the camcorder to PC.  
6.  
6. PC finds a new hardware and install a driver automatically.  
7. If the driver is installed, the install is completed.  
8. Execute USB Media 2.0 player on the Windows wall paper.  
Reference  
USB Media 2.0 User's Manual is included on the accompanying CD in Adobe's Portable Document Format (PDF).  
The user's manual can be viewed using Acrobat Reader software, which is also included on the CD.  
(The Acrobat Reader is a freeware product of Adobe Systems, Inc.)  
64  
ENGLISH  
USB interfa ce (SCL7 7 0 only)  
Connecting to a PC  
1. Connect a USB cable to the USB port on the PC.  
2. Connect the other end of the USB cable into the proper terminal on the camcorder. (USB jack)  
3. Connect the audio cable to the Line input jack of the PC.  
If the PC has no Line input jack, connect the audio cable to the MIC input jack.  
In this case, however, a noise may be produced depending on the PC.  
Notes  
If you disconnect the USB cable from the PC or the camcorder while transferring, the data transmission will stop  
and the data may be damaged.  
If you connect the USB cable to a PC via a USB HUB or simultaneously connect the USB cable along with other  
USB devices, the camcorder may not work properly.  
-
In this case, remove the other USB devices from the PC and reconnect the camcorder.  
USB Cable  
MIC  
USB AUDIO Cable  
65  
ENGLISH  
Ma intena nce  
Cleaning and Taking care of the Camcorder  
Cleaning the Viewfinder  
Releasing the Eyecap  
1. Pull the VIEWFINDER up and then turn the screw counter-clockwise.  
2. Pull the EYECAP out.  
3. Clean the EYECAP and the VIEWFINDER screen with a soft cloth  
and cotton swab or a blower.  
Reattaching the Eyecap  
4. Put the EYECAP on the VIEWFINDER.  
5. Put the screw back on.  
Cleaning the LCD panel  
Open the LCD monitor and wipe it gently with a soft cloth.  
Be careful not to damage the panel.  
Cleaning the Video Heads  
To ensure normal recording and clear pictures, clean the video heads.  
When the playback pictures are noisy or hardly visible, the video heads may be dirty.  
a.  
Normal Picture  
a
b
c
b, c. Noisy Picture  
If this happens, clean the video heads  
with a dry type cassette cleaner.  
1. Set the power switch to PLAYER mode.  
2. Insert the cleaning tape.  
3. Press the  
4. Press the  
(PLAY/STILL) button.  
(STOP) button after about 30 seconds.  
Check the quality of the picture using a video cassette.  
If it is still bad, repeat the operation. If the problem  
continues, contact your local authorized service center.  
Storing the Camcorder  
1. You must detach the BATTERY PACK from the  
camcorder when storing.  
2. Keep the camcorder in a ventilated, dry and warm place.  
3. Do not keep the camcorder in a place where the  
temperature often changes, such as in a car.  
4. Keep the camcorder in a stable place.  
66  
ENGLISH  
Using Your Ca m cord er Ab roa d  
Using Your Camcorder Abroad  
Each country or area has its own electric and TV color system.  
Before using your camcorder abroad, check the following:  
Power sources  
You can use your camcorder in any country or area that uses 100V to 240V, 50/60 Hz.  
Use a commercially available AC plug adapter, if necessary, depending on the power used.  
Color system  
You can view your recording on the LCD or viewfinder.  
However, to view a recording on a television or to make a copy to a video cassette recorder,  
the television or VCR must be NTSC or PAL60(Player mode only) compatible and have the appropriate  
audio/video jacks.  
PAL-compatible area  
Australia, Austria, Belgium, Bulgaria, China, CIS, Czech Republic, Denmark, Egypt, Finland, France, Germany,  
Greece, Great Britain, Holland, Hong Kong, Hungary, India, Iran, Iraq, Kuwait, Libya, Malaysia, Mauritius,  
Rumania, Saudi Arabia, Singapore, Slovak Republic, Spain, Sweden, Switzerland, Syria, Thailand, Tunisia, etc.  
NTSC-compatible area  
Bahamas, Canada, Central America, Japan, Mexico, Philippines, Korea, Taiwan, United States, etc.  
Note: You can make recordings with your camcorder anywhere in the world.  
67  
ENGLISH  
Troub leshooting  
Troubleshooting  
Before contacting a service center, perform the following simple checks. They might save you the time and  
expense of an unnecessary call.  
Self Diagnosis Display  
Display  
Blinking  
Inform that...  
Action  
the battery pack is almost  
discharged  
Change it to a charged  
one.  
slow  
fast  
the battery pack is fully  
discharged.  
Change it to a charged  
battery.  
the tape has almost reached  
its end.  
TAPE END!  
slow  
Prepare a new one.  
TAPE END!  
TAPE!  
no  
the tape reached its end  
Change to a new one.  
Insert a tape.  
slow  
there is no tape in the camcorder.  
the tape is protected  
from recording.  
If you want to record,  
release the protection.  
PROTECTION!  
slow  
slow  
D.EMG  
C.EMG  
R.EMG  
L.EMG  
the camcorder has some  
mechanical fault.  
1. Eject the tape.  
2. Set to OFF  
3. Detach the battery.  
4. Reattach the battery.  
* Please contact your local authorized  
service center if the problem  
continues.  
moisture condensation  
has formed in the camcorder.  
slow  
see page 71.  
68  
ENGLISH  
Troub leshooting  
Checking  
If you run into any problem using the camcorder, use the following table to troubleshoot the problem.  
If these instructions do not allow you to solve the problem, take a note of:  
The model and serial number marked on the bottom of the camcorder.  
Your warranty, if applicable.  
Then contact your nearest authorized service center.  
Symptom  
Explanation/Solution  
Check the battery pack (see page 23)  
You cannot switch the  
camcorder on.  
or the AC power adapter. (see page 22)  
Start/Stop does not  
operate while recording  
Check the POWER, set it to CAMERA.  
You have reached the end of the cassette.  
Check the record protection tab on the cassette. (see page 26)  
The camcorder goes  
off automatically.  
You have left the camcorder set to STANDBY  
for more than 5 minutes without using it.(see page 28)  
The battery pack is fully used up. (see page 25)  
The battery pack is  
quickly exhausted.  
The atmospheric temperature is too low. (see page 25)  
The battery pack has not been charged fully.(see page 23)  
The battery pack is completely dead, and cannot be recharged.  
Use another battery pack.  
You cannot eject the  
cassette from the  
compartment.  
The battery pack is fully used up.  
A mechanical fault might have occurred. (see page 68)  
The DATE/TIME indicator  
flashes more than 2 times  
when you set the  
The lithium battery is not installed or is fully used up. (see page 21)  
camcorder to CAMERA.  
The playback picture  
is poor.  
The video heads might be dirty. (see page 66)  
You cannot operate any  
functions on the camcorder.  
A mechanical fault might have occurred (see page 68).  
69  
ENGLISH  
Troub leshooting  
Symptom  
Explanation/Solution  
A vertical stripe appears when  
you record a bright subject  
against a dark background  
(candle flame, for example).  
The contrast between the subject and the background is too great for the  
camcorder to operate normally. Make the background bright to reduce the  
contrast or use the BLC function while you are recording. (see page 41)  
The image quality on the LCD  
is poor.  
The use of VIEWFINDER is recommended when recording under sunlight.  
(see page 7)  
Adjust the LCD. (see page 30)  
The image in the viewfinder is  
blurred.  
The viewfinder lens has not been adjusted.  
Turn the viewfinder focus ring until the screen comes into sharp focus.  
(see page 31)  
The tape does not move when  
you press the Play, Fast  
Set the POWER switch to PLAYER.  
You have reached the beginning or end of the cassette.  
Forward or Rewind buttons.  
The picture does not appear in  
the viewfinder.  
The LCD monitor is opened.  
There is no sound from the  
SPEAKER when playing back  
the tape.  
Make sure the SPEAKER is ON. (see page 60)  
The lithium battery is not installed or is fully used up.  
(see page 21)  
The Date/Time or Title disap-  
peared even though you had it  
set.  
70  
ENGLISH  
Troub leshooting  
Moisture Condensation  
If the camcorder is brought directly from a cold place to a warm place, moisture may condense inside the  
camcorder, on the surface of the tape, or on the lens. In this condition, the tape may stick to the head drum and be  
damaged or the unit may not operate correctly.  
To prevent possible damage under these circumstances,  
the camcorder has a built-in moisture sensor.  
If there is moisture inside the camcorder, DEW  
DEW  
is displayed.  
If this happens, none of the functions except cassette ejection will work.  
Open the cassette compartment and remove the battery for at least two  
hours in a warm dry room.  
Please follow this procedure when the DEW protection feature is  
unexpectedly activated and you want to override it:  
(Please make sure that the condensation has disappeared completely.)  
1. Take the battery pack out.  
2. Take the lithium battery out.  
3. Put the lithium battery back.  
4. Put the battery pack back.  
71  
ENGLISH  
Sp ecifica tions  
These technical specifications and design may be changed without notice.  
System  
SCL700/L710/L750/L770  
Recording system  
Video: 2 rotary heads Helical scanning FM  
Audio: FM monaural system  
NTSC color, EIA standard  
Hi8 or 8mm  
Video signal  
Usable cassette  
Tape speed  
Speed mode  
Recording time  
FF or REW time  
Image device  
Optical zoom ratio  
Focal length: f  
F
SP: 14.345 mm/sec  
Record: SP only Playback: SP only  
P6-120: 120 min.  
P6-120: approx. 6.5 min.  
CCD (Charge Coupled Device)  
22x  
3.6~79.2 mm  
1.6  
Filter diameter  
Focus system  
Macro  
46 mm  
Inner  
Auto wide macro  
Min. Illumination  
0.3 lux (visible)  
LCD monitor  
Size/Pic. cell  
Method  
2.5 inch/112k  
TFT  
Connectors  
Video out  
Audio out  
External mic  
Mini jack, 1 Vp-p, 75 ohms, Unbalanced  
Mini jack, 7.7 dBs, imp.: less than 820 ohms  
Monaural ø3.5 (SCL750/L770)  
General  
Power requirements  
Power consumption  
*Recording, LCD ON  
Built-in mic  
Built-in speaker  
Operating temperature  
Dimension (WxHxD)  
Weight  
DC 8.4 V (1.5 A)  
SCL700/L710 : 5.4 W, SCL750/L770: 5.9 W  
Condenser mic, omni-directional  
Dynamic, 0.5 W standard  
0°C to 40°C (32°F to 104°F)  
101x104x174 mm (3.98x4.09x6.85 inches)  
780 g (1.716 lbs)  
72  
ENGLISH  
Ind ex  
- A -  
- E -  
ABROAD ..............................................................................67  
AC POWER ADAPTER ........................................................22  
ADJUSTING ........................................................................30  
AF ........................................................................................40  
AUDIO ..................................................................................56  
AUTO FOCUSING .................. ............................................40  
AUTO MODE........................................................................42  
AUTO POWER OFF ............................................................28  
EASY ....................................................................................37  
EJECT ..................................................................................26  
ENTER..................................................................................30  
EXTERNAL MIC ..................................................................72  
- F -  
FADE IN................................................................................50  
FADE OUT............................................................................50  
FAR ......................................................................................40  
FF (FAST FORWARD) ........................................................59  
FILTER DIAMETER..............................................................72  
FOCAL LENGTH ..................................................................72  
- B -  
BATTERY..............................................................................23  
BATTERY LEVEL ................................................................25  
BATTERY PACK ..................................................................23  
BLC ......................................................................................41  
BRIGHTNESS ......................................................................30  
- G -  
GHOST ................................................................................44  
- C -  
- H -  
CAMERA ..............................................................................22  
CASSETTE ..........................................................................26  
CASSETTE HOLDER ..........................................................15  
CLEANING ..........................................................................66  
COLOR ................................................................................30  
CONTENTS............................................................................2  
COUNTER............................................................................59  
CUSTOM ..............................................................................38  
HAND STRAP ......................................................................20  
Hi8 ........................................................................................58  
- L -  
LCD ......................................................................................30  
LENS ....................................................................................13  
LITHIUM BATTERY..............................................................21  
- D -  
- M -  
DATE ....................................................................................46  
DATE/TIME ..........................................................................46  
DC CABLE............................................................................22  
DEMO ..................................................................................54  
DEW ....................................................................................71  
DIGITAL ZOOM ....................................................................35  
DIMENSIONS ......................................................................72  
DIS........................................................................................39  
DISPLAY ..............................................................................16  
DSE ......................................................................................44  
MIRROR ..............................................................................44  
MOISTURE ..........................................................................71  
MOSAIC................................................................................44  
73  
ENGLISH  
Ind ex  
SNAP SHOT ........................................................................52  
SPEAKER ............................................................................60  
SPECIFICATIONS................................................................70  
SPORTS MODE ..................................................................42  
SPOTLIGHT MODE ............................................................42  
START/STOP ......................................................................27  
STILL....................................................................................59  
STOP ..................................................................................58  
STROBE ..............................................................................44  
SYSTEM ..............................................................................72  
S-VIDEO ............................................................................58  
- N -  
ND FILTER ..........................................................................56  
NEAR....................................................................................40  
NEG......................................................................................44  
NTSC....................................................................................67  
- O -  
OPERATION MODE ............................................................17  
OSD ....................................................................................16  
- P -  
- T -  
PIP ......................................................................................51  
PLAY ....................................................................................58  
PLAYER ..............................................................................58  
PORTRAIT MODE ..............................................................42  
POWER CONSUMPTION....................................................72  
POWER REQUIREMENT....................................................72  
POWER SWITCH ................................................................22  
PROGRAM AE ....................................................................42  
TAPE COUNTER ................................................................17  
TAPE EJECT........................................................................26  
TAPE END ..........................................................................68  
TIME ....................................................................................46  
TITLE ..................................................................................48  
TROUBLESHOOTING ........................................................69  
TV MONITOR ......................................................................57  
- V -  
- R -  
VIDEO..................................................................................57  
VIDEO HEAD ......................................................................66  
VOLUME..............................................................................60  
RECHARGING ....................................................................23  
REC SEARCH ....................................................................28  
REMOTE CONTROL............................................................19  
REW (REWIND) ..................................................................59  
- W -  
- S -  
WAIT-10S ............................................................................19  
WEIGHT ..............................................................................72  
WHITE BALANCE................................................................53  
SAFETY INSTRUCTIONS ....................................................4  
SAND/SNOW MODE ..........................................................42  
SELF-30S ............................................................................19  
SELF-END ..........................................................................19  
SELF DIAGNOSIS ..............................................................68  
SELF RECORD....................................................................19  
SELF TIMER........................................................................19  
SEPIA ..................................................................................44  
SHOULDER STRAP ............................................................21  
- Z -  
ZERO RETURN ..................................................................59  
ZOOM ..................................................................................34  
74  
ENGLISH  
W a rra nty  
SAMSUNG  
LIMITED WARRANTY  
SAMSUNG Electronics America Inc. (SEA), warrants that this product is free from defective material and  
workmanship.  
SEA further warrants that if product fails to operate properly within the specified warranty period and the failure is  
due to improper workmanship or defective material, SEA will repair or replace the product at it’s option.  
All warranty repairs must be performed by a SEA authorized service center. The name and address of the  
location nearest you can be obtained by calling toll free: 1-800 SAMSUNG (1-800-726-7864).  
Labor  
90 days carry-in  
Parts  
1 year  
On carry-in models, transportation to and from the service center is the customer’s responsibility.  
The original dated sales receipt must be retained by the customer and is the only acceptable proof of purchase.  
It must be presented to the authorized service center.  
EXCLUSIONS (WHAT IS NOT COVERED)  
This warranty does not cover damage due to accident, fire, flood and/or other acts of God; misuse,  
incorrect line voltage, improper installation, improper or unauthorized repairs, commercial use,  
or damage that occurs in shipping.  
Exterior and interior finish, lamps, and glass are not covered under this warranty.  
Customer adjustments which are explained in the instruction manual are not covered under the terms of this  
warranty. This warranty will automatically be voided for any unit found with a missing or altered serial number.  
This warranty is valid only on products purchased in the United States and Puerto Rico.  
Some States do not allow the exclusions or limitations of incidental or consequential damages, or allow  
limitations on how long an implied warranty lasts, so the above limitations or exclusions may not apply to you.  
This warranty gives you specific legal rights, and you may also have other rights which vary from State to State.  
75  
THIS CAMCORDER IS MANUFACTURED BY:  
ELECTRONICS  
SAMSUNG Electronics America Inc.  
105 Challenger Road Ridgefield Park N.J 07660-0511  
Tel: 1-800-SAMSUNG (1-800-726-7864)  
*Samsung Electronics’ Internet Home Page  
AD68-00441B  

Weil McLain HE (Series 3) User Manual
Tokina MONOFOCAL LENS TC1214DC User Manual
Sony XR 3208MK2 User Manual
Sony Walkman WM FX481 User Manual
Sony HVL F60M User Manual
Sony DVD108E User Manual
Sony DT 18 55MM F3.5 5.6 SAM User Manual
Sony CCD TRV87 User Manual
Sanyo EP93F User Manual
Samsung Car Video System 2493HM User Manual