Samsung LN40A330JD User Manual

LN26A330JꢀD LN32A330JꢀD  
LN37A330JꢀD LN40A330JꢀD  
1-800-SAMSUNG (7267864)  
Samsung Electronics America, Inc.  
105 Challenger Road Ridgefield Park, NJ 07660-0511  
Samsung Electronics Canada Inc., Customer Service  
55 Standish Court Mississauga, Ontario L5R 4B2  
Call center hours of operation (Mon-Sun 9AM-12AM EST).  
To register this product please visit  
Rear Panel / Side Panel Jacks  
The product color and shape may  
vary depending on the model.  
1 AUDIO OUT  
5 ANT IN  
9 EX-LINK  
2 DIGITAL AUDIO OUT (OPTICAL) 6 POWER INPUT  
0 KENSINGTON LOCK  
3 PC IN [PC] / [AUDIO]  
7 SERVICE  
4 HDMI IN ꢀ, 2, 3  
8 COMPONENT IN ꢀ, 2 / AV IN ꢀ  
/ DVI IN (HDMI2) [R-AUDIO-L]  
Video Input Performance Comparison  
Audio Output Performance Comparison  
/
HDMI/DVI  
PC/COMPONENT  
S-VIDEO  
Best  
Better  
Good  
OPTICAL (Digital)  
Best  
AUDIO (Analog)  
Normal  
/
VIDEO  
Normal  
English-ꢀ  
Connections  
Connecting a DVD Player or Cable Box/Satellite receiver (Set-Top Box) via HDMI  
Connect an HDMI Cable between  
the HDMI IN (1 or 2) jack on the  
TV Rear Panel  
TV and the HDMI jack on the  
DVD Player or Cable Box/Satellite  
receiver (Set-Top Box).  
What is HDMI?  
HDMI(High-Definition Multimedia  
Interface), is an interface that enables the  
transmission of digital audio and video  
signals using a single cable.  
DVD Player or Cable Box/  
Satellite receiver (Set-Top Box)  
The difference between HDMI and DVI  
is that the HDMI device is smaller in  
size and has the HDCP (High Bandwidth  
Digital Copy Protection) coding feature  
installed.  
HDMI Cable (Not supplied)  
Each DVD Player or Cable Box/Satellite receiver (Set-Top Box) has a different back panel configuration.  
Connecting a DVD Player or Cable Box/Satellite receiver (Set-Top Box) via DVI  
Connect a DVI to HDMI Cable or  
DVI-HDMI Adapter between the  
HDMI IN 2 jack on the TV and the DVI  
jack on the DVD Player or Cable Box/  
Satellite receiver (Set-Top Box).  
TV Rear Panel  
Connect Audio Cables between the  
DVI IN (HDMI 2) [R-AUDIO-L] jack on  
the TV and the DVD Player or Cable  
2
Box/Satellite receiver (Set-Top Box).  
DVD Player or Cable Box/  
Satellite receiver (Set-Top Box)  
Audio Cable (Not supplied)  
2
DVI to HDMI Cable (Not supplied)  
Each DVD Player or Cable Box/Satellite receiver (Set-Top Box) has a different back panel configuration.  
When connecting a DVD Player or Cable Box/Satellite receiver (Set-Top Box), match the color of the connection terminal to the  
cable.  
When using an HDMI/DVI cable connection, you must use the HDMI IN 2 jack.  
English-3  
Connecting a DVD Player or Cable Box/Satellite receiver (Set-Top Box)  
via Component cables  
Connect a Component Cable between  
the COMPONENT IN (1 or 2)  
[Y, PB, PR] jacks on the TV and the  
COMPONENT [Y, PB, PR] jacks on  
the DVD Player or Cable Box/Satellite  
receiver (Set-Top Box).  
TV Rear Panel  
Connect Audio Cables between the  
COMPONENT IN(1 or 2) [R-AUDIO-L]  
jacks on the TV and the AUDIO OUT  
DVD Player or Cable Box /  
Satellite receiver (Set-Top Box)  
2
jacks on the DVD Player or Cable  
Box/Satellite receiver (Set-Top Box).  
Component video separates the video  
into Y (Luminance (brightness)), Pb  
(Blue) and Pr (Red) for enhanced video  
quality.  
Be sure to match the component video  
and audio connections.  
For example, if connecting  
Component Cable  
(Not supplied)  
a Component video cable to  
COMPONENT IN 1, connect the audio  
cable to COMPONENT IN 1 also.  
2
Audio Cable (Not supplied)  
Each DVD Player or Cable Box/  
Satellite receiver (Set-Top Box) has a  
different back panel configuration.  
When connecting a DVD Player or  
Cable Box/Satellite receiver (Set-Top  
Box), match the color of the connection  
terminal to the cable.  
Connecting a Camcorder  
Connect a Video Cable between  
the AV IN 1 [Y/VIDEO] jack on the  
TV and the VIDEO OUT jack on the  
camcorder.  
2
Camcoder  
TV Rear Panel  
Connect Audio Cables between the  
AV IN 1[R-AUDIO-L] jacks on the TV  
and the AUDIO OUT jacks on the  
camcorder.  
Each Camcorder has a different back  
panel configuration.  
When connecting to AV IN 1, the color  
of the AV IN 1 [Y/VIDEO] jack (Green)  
does not match the color of the video  
cable (Yellow).  
Video Cable (Not supplied)  
Audio Cable (Not supplied)  
2
English-4  
Connecting a VCR  
Video Connection  
Unplug the cable or antenna  
from the back of the TV.  
2
TV Rear Panel  
Connect the cable or antenna  
to the ANT IN terminal on the  
back of the VCR.  
VCR Rear Panel  
Connect an RF Cable between  
the ANT OUT terminal on the  
VCR and the ANT IN terminal  
on the TV.  
Connect a Video Cable between  
the VIDEO OUT jack on the  
VCR and the AV IN 1 [Y/VIDEO]  
jack on the TV.  
3
4
Connect Audio Cables between  
the AUDIO OUT jacks on  
the VCR and the AV IN 1 [R-  
AUDIO-L] jacks on the TV.  
RF Cable (Not supplied)  
3
4
Video Cable (Not supplied)  
If you have a “mono” (non-stereo)  
VCR, use a Y-connector (not  
supplied) to hook up to the right  
and left audio input jacks of the  
TV. If your VCR is stereo, you  
must connect two cables.  
Audio Cable (Not supplied)  
Follow the instructions in “Viewing a VCR or Camcorder Tape” to view your VCR tape.  
Each VCR has a different back panel configuration.  
When connecting a VCR, match the color of the connection terminal to the cable.  
When connecting to AV IN 1, the color of the AV IN 1 [Y/VIDEO] jack (Green) does not match the color of the video cable  
(Yellow).  
English-ꢁ  
Connecting a Digital Audio System  
Connect an Optical Cable between  
the “DIGITAL AUDIO OUT  
(OPTICAL)” jacks on the TV and  
the Digital Audio Input jacks on the  
Digital Audio System.  
TV Rear Panel  
Digital Audio System  
When a Digital Audio System is  
connected to the “DIGITAL AUDIO  
OUT (OPTICAL)” jack: Decrease  
the volume of the TV and adjust  
the volume level with the system’s  
volume control.  
5.1CH audio is possible when the TV  
is connected to an external device  
supporting 5.1CH.  
Optical Cable (Not supplied)  
Each Digital Audio System has a  
different back panel configuration.  
When the receiver (home theater) is  
set to On, you can hear sound output  
from the TV’s Optical jack. When the TV  
is displaying a DTV(air) signal, the TV  
will send out 5.1 channel sound to the  
Home theater receiver. When the source  
is a digital component such as a DVD  
and is connected to the TV via HDMI,  
only 2 channel sound will be heard from  
the Home Theater receiver. If you want  
to hear 5.1 channel audio, connect the  
DIGITAL AUDIO OUT (OPTICAL) jack  
on the DVD player or Cable/Satellite  
Box directly to an Amplifier or Home  
Theater, not the TV.  
Connecting an Amplifier/DVD Home Theater  
Connect Audio Cables between the  
AUDIO OUT [R-AUDIO-L] jacks on  
the TV and AUDIO IN [R-AUDIO-L]  
jacks on the Amplifier/DVD Home  
Theater.  
TV Rear Panel  
Amplifier/DVD Home Theater  
When an audio amplifier is  
connected to the "AUDIO OUT  
[R-AUDIO-L]" jacks: Decrease the  
volume of the TV and adjust the  
volume level with the Amplifier’s  
volume control.  
Each Amplifier/DVD Home Theater has  
a different back panel configuration.  
Audio Cable (Not supplied)  
When connecting an Amplifier/DVD  
Home Theater, match the color of the  
connection terminal to the cable.  
English-6  
Connecting a PC  
Using the D-Sub Cable  
Connect a D-Sub Cable between  
TV Rear Panel  
PC IN [PC] connector on the TV  
and the PC output connector on  
your computer.  
Connect a PC Audio Cable  
between the PC IN [AUDIO] jack  
on the TV and the Audio Out jack of  
the sound card on your computer.  
2
PC  
D-Sub Cable (Not supplied)  
PC Audio Cable (Not supplied)  
2
Using the HDMI/DVI Cable  
Connect an HDMI/DVI cable between  
TV Rear Panel  
the HDMI IN 2 jack on the TV and  
the PC output jack on your computer.  
Connect a 3.5 mm Stereo mini-  
plug/2RCA Cable between the DVI  
IN(HDMI2) [R-AUDIO-L] jack on the  
TV and the Audio Out jack of the  
sound card on your computer.  
2
Each PC has a different back panel  
configuration.  
PC  
HDMI/DVI Cable (Not supplied)  
When connecting a PC, match the  
color of the connection terminal to the  
cable.  
When using an HDMI/DVI cable  
connection, you must use the HDMI  
IN 2 jack.  
3.5 mm Stereo mini-plug/2RCA Cable (Not supplied)  
2
English-7  
The TV begins memorizing all available stations.  
After all the available channels are stored, it start to  
remove scrambled channels.  
Turning the TV On and Off  
Press the POWER button on the remote control.  
Press the EXIT button to exit.  
You can also use the POWER button on the TV.  
AutoProgram  
Auto Program in Progress.  
DTV Cable : --  
Cable : ꢀꢀ  
Viewing the Menus  
Cable 24  
ꢀꢀ  
%
Stop  
Enter  
Return  
AutoProgram  
With the power on, press the MENU button.  
Removing scrambled channel.  
The main menu appears on the screen.  
The menu’s left side has icons: Picture, Sound,  
Channel, Setup, Input.  
DTV Cable ꢁꢁ  
ꢂ0  
%
Stop  
Enter  
Press the ▲ or ▼ button to select one of the icons.  
Return  
Then press the ENTER  
button to access the  
2
icon’s sub-menu. Press the EXIT button to exit.  
The on-screen menus disappear from the  
screen after about one minute.  
Storing Channels in Memory  
(Automatic Method)  
Press the MENU button to display the menu.  
Press the ▲ or ▼ button to select “Channel”, then  
press the ENTER  
button.  
Press the ▲ or ▼ button to select “Auto Program”,  
then press the ENTER button.  
2
3
To Stop the Auto Program Function  
Press the MENU button while the Auto Program function is  
being executed. You can also press the ENTER  
to stop the setup.  
Press the ▲ or ▼ button to select the antenna  
connection, then press the ENTER button.  
button  
TV  
Auto Program  
Selects the antenna to execute the Auto  
Program function.  
Checking to see if Channels were Stored in Memory  
Start  
Start  
Start  
Air  
Press the CH button. Only the channels stored in memory  
will be selected (in order).  
Cable  
Auto  
Selecting the antennas  
Move  
Enter  
Return  
Air: “Air” antenna signal.  
When selecting the Cable TV system:  
Cable: “Cable” antenna signal.  
Auto: “Air” and “Cable” antenna signals.  
Press the ENTER  
program.  
button to start the auto  
4
Press the ◄ or ► button, then press the ▲ or ▼ to  
select the correct analog signal cable system source  
among “STD”, “HRC”, and “IRC”.  
Press the ENTER  
button.  
If you have Digital cable TV, select the cable system  
signal source for both Analog and Digital.  
TV  
Auto Program  
Selects a cable signal type for your location.  
Analog  
STD  
HRC  
IRC  
Start  
Digital  
STD  
HRC  
IRC  
Move  
Enter  
Return  
English-ꢂ  
Setting the Channel List  
Picture Mode  
Using this menu, you can Add/Delete or set Favorite  
channels and use the program guide for digital broadcasts.  
To use the Channel List function, first run “Auto Program”.  
Dynamic: Selects the picture for high-definition in a bright  
room.  
Standard: Selects the picture for the optimum display in a  
normal environment.  
Movie: Selects the picture for viewing movies in a dark  
room.  
Press the MENU button. Press the ▲ or ▼ button to  
select “Channel”, then press the ENTER  
button.  
Press the ▲ or ▼ button to select “Channel List”,  
then press the ENTER  
button.  
Customizing the Picture Settings  
Your television has several setting options that allow you to  
control the picture quality.  
Press the ENTER  
button to select “All”.  
2
3
Press the ◄, ►, ▲ or ▼ button to select a channel  
to delete, then press the ENTER button.  
Press the ▲ or ▼ button to select “Delete”, then  
press the ENTER button to delete the channel.  
To select the desired picture mode, follow the  
“Changing the Picture Standard” instructions  
numbers 1 and 2.  
Press the ◄, ►, ▲ or ▼ button to select a channel  
to add, then press the ENTER button.  
Press the ▲ or ▼ button to select “Add”, then press  
Press the ▲ or ▼ button to select “Backlight”,  
“Contrast”, “Brightness”, “Sharpness”, “Color” or  
4
2
“Tint”, then press the ENTER  
button.  
the ENTER  
button to add the channel.  
Press the ◄ or ► button to decrease or increase  
the value of a particular item. Press the EXIT button  
to exit.  
Channel List / All  
Air ꢁ  
ꢀ / 2  
3
DTV Air 2-ꢀ  
Air3  
Air4  
Air ꢁ  
Air 6  
Air 7  
DTV Air 7-ꢀ  
Air ꢂ  
Air ꢃ  
Air ꢀ0  
DTV Air ꢀ0-ꢀ  
Watch
Add  
DTV Air ꢀ0-ꢀ  
DTV Air ꢀ0-2  
DTV Air ꢀ0-3  
Air ꢀ2  
DTV Air ꢀ3-ꢀ  
DTV Air ꢀ3-2  
DTV Air ꢀ3-3  
DTV Air ꢀ3-4  
When you make changes to “Backlight”,  
“Contrast”, “Brightness”, “Sharpness”, “Color”  
or “Tint”, the OSD will be adjusted accordingly.  
Delete  
Favorite  
DTV Air ꢀ0-3  
Add All  
In PC mode, you can only make changes to  
“Backlight”, “Contrast” and “Brightness”.  
List Mode  
Delete All  
Move  
Enter  
Return  
Settings can be adjusted and stored for each  
external device you have connected to an input  
of the TV.  
TV  
Picture  
: Standard  
Mode  
7
Changing the Picture Standard  
You can activate either Dynamic, Standard, Movie by  
making a selection from the menu.  
Backlight  
Contrast  
Brightness  
Sharpness  
Color  
ꢃꢁ  
4ꢁ  
ꢁ0  
ꢁ0  
Tint  
G ꢁ0  
R ꢁ0  
Press the MENU button to display the menu.  
▼ More  
Press the ENTER  
button, to select “Picture”.  
2
Move  
Enter  
Return  
Backlight  
Press the ENTER  
Press the ▲ or ▼ button to select “Dynamic”,  
“Standard” or “Movie”.  
Press the ENTER  
button to select “Mode”.  
7
Move  
Adjust  
Return  
button.  
TV  
Picture  
Mode  
: Dynamic  
Dynamic  
Backlight  
Contrast  
Brightness  
Sharpness  
Color  
7
ꢃꢁ  
Standard  
Movie  
Picture Adjustment  
4ꢁ  
ꢁ0  
ꢁ0  
Backlight: Adjusts the brightness of LCD back light.  
Contrast: Adjusts the contrast level of the picture.  
Brightness: Adjusts the brightness level of the picture.  
Sharpness: Adjusts the edge definition of the picture.  
Color: Adjusts color saturation of the picture.  
Tint: Adjusts the color tint of the picture.  
Tint  
G ꢁ0  
R ꢁ0  
▼ More  
Move  
Enter  
Return  
English-ꢃ  
To Select the Source  
TV  
Source List  
TV  
AV  
: ----  
: ----  
: ----  
: ----  
: ----  
: ----  
Componentꢀ  
Component2  
PC  
HDMIꢀ  
HDMI2  
▼ More  
Move  
Enter  
Return  
Press the SOURCE button on the Remote Control  
You can select the TV mode or an input source connected to the TV set. Use this button to choose an input source that you  
would like to watch.  
Available signal sources: TV, AV, Component1, Component2, PC, HDMI1, HDMI2.  
You can choose only those external devices that are connected to the TV.  
English-ꢀ0  
Troubleshooting  
If the TV seems to have a problem, first try this list of possible problems and solutions.  
If none of these troubleshooting tips apply, call your nearest Samsung service center.  
Problem  
Possible Solution  
Poor picture  
Try another channel. / Adjust the antenna. / Check all wire connections.  
Try another channel. / Adjust the antenna.  
Poor sound quality.  
No picture or sound.  
Try another channel. / Press the SOURCE button. /  
Make sure the TV is plugged in. / Check the antenna connections.  
No sound or sound is too low at maximum First, check the volume of units connected to your TV (digital broadcasting  
volume.  
receiver, DVD, cable broadcasting receiver, VCR, etc.). Then, adjust the TV  
volume accordingly.  
Picture rolls vertically.  
Check all wire connections.  
The TV operates erratically.  
The TV won’t turn on.  
Unplug the TV for 30 seconds, then try operating it again.  
Make sure the wall outlet is working.  
Remote control malfunctions  
Replace the remote control batteries.  
Clean the upper edge of the remote control (transmission window).  
Check the battery terminals.  
“Check signal cable” message.  
“Not Supported Mode” message.  
Ensure that the signal cable is firmly connected to the PC source.  
Check the maximum resolution and connected device’s Video frequency.  
Compare these values with the data in the Display Modes.  
Digital broadcasting screen problem.  
The image is too light or too dark.  
Black bars on the screen.  
Please check the digital signal strength and input antenna.  
Adjust the Brightness and Contrast. / Adjust the Fine tuning.  
Make sure the broadcast you’re receiving is High Definition (HD).  
HD channels sometimes broadcast Standard Definition (SD) programming, which  
can cause black bars.  
Set your cable/satellite box to stretch or widescreen mode to eliminate the bars.  
Picture has a Red/Green or Pink tint.  
Closed Captioning not working.  
Make sure the Component cables are connected to the correct jacks.  
If you are using a Cable/Satellite box, you must set Closed Captioning on the box,  
not your TV.  
Snowy picture.  
Your cable box may need a firmware upgrade. Please contact your Cable  
company.  
Ghosting on picture  
This is sometimes caused by compatibility issues with your cable box.  
Try connecting Component cables instead.  
Horizontal bars appear to flicker, jitter or  
Adjust the Coarse tuning and then adjust the Fine tuning.  
shimmer on the image.  
Vertical bars appear to flicker, jitter or  
Adjust the Coarse tuning and then adjust the Fine tuning.  
shimmer on the image.  
Screen is black and power indicator light  
blinks steadily.  
On your computer check: Power, Signal Cable.  
The TV is using its power management system.  
Move the computer's mouse or press any key on the keyboard.  
Image is not centered on the screen.  
Adjust the horizontal and vertical position.  
The screen position must be adjusted on the output source (i.e. STB) with a  
digital signal.  
The picture appears distorted in the  
corner of the screen.  
If "Just Scan" is selected with some external devices, the picture may appear  
distorted in the corner of the screen. This symptom is caused by the external  
devices, not TV.  
The “Resets all settings to the default  
values” message appears  
This appears when you press and hold the EXIT button for a while. The product  
settings are reset to the factory defaults.  
English-ꢀꢀ  
Contact SAMSUNG WORLDWIDE  
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG  
customer care center.  
Contacte con SAMSUNG WORLDWIDE  
Si tiene alguna pregunta o comentario referente a nuestros productos, por favor contacte con nuestro Servicio de Atención al  
Cliente.  
Country  
Web Site  
Address  
Customer Care Center  
Samsung Electronics Canada Inc., Customer  
Service 55 Standish Court Mississauga,  
Ontario L5R 4B2 Canada  
CANADA  
1-800-SAMSUNG(726-7864)  
Samsung Electronique Canada Inc.,  
Service à la Clientèle 55 Standish Court  
Mississauga, Ontario L5R 4B2 Canada  
Samsung Electronics America, Inc.  
105 Challenger Road  
U.S.A  
1-800-SAMSUNG(726-7864)  
Ridgefield Park, NJ 07660-0511  
BN6ꢂ-0ꢀꢁꢀ6A-00  

Weil McLain 382 200 300 User Manual
Vita Mix BarBoss User Manual
Vista Davis & Sanford CourierXTT User Manual
Star Manufacturing Peristaltic Heated Condiment Dispenser HPDE2 User Manual
Sony Handycam DCR PC109 User Manual
Sony DSCH70R User Manual
Sharp XE A201 User Manual
Sharp ERA420 User Manual
Scotch Brand 5.1.10 User Manual
Samsung HMX H104BN User Manual