User Manual
High Definition Digital Camcorder
www.samsung.com/register
For video recording, use a memory card that supports faster write speeds.
-
Memory Card: A Class 6 SDHC card or above.
HMX-T10WN
HMX-T10BN
HMX-T10ON
IMPORTANT INFORMATION ON USE
About this user manual
Before using this camcorder
Thank you for purchasing this Samsung
Camcorder. Please read this user manual
carefully before you use the camcorder and
keep it handy for future reference. Should
your camcorder fail to operate correctly, refer
to Troubleshooting.
•
•
This camcorder records video in H.264
(MPEG4 part10/AVC) format and in
High Definition Video (HD-VIDEO) or
Standard Definition Video (SD-VIDEO).
You can play back and edit the video
recorded by the camcorder on a
personal computer using the internal
software of this camcorder.
This User Manual covers HMX-T10WN,
HMX-T10BN, HMX-T10ON models.
•
Illustrations of model HMX-T10BN are
used in this user manual.
The displays in this user manual may not
be exactly the same as those you see on
the LCD screen.
Designs and specifications of the
camcorder and other accessories are
subject to change without any notice.
In this user manual, the icon or symbol in
the parenthesis appearing in a description
of a submenu item indicates it will
appear on the screen when setting the
corresponding item.
•
•
Please note that this camcorder is not
compatible with other digital video
formats.
•
Before recording important video, make
a trial recording.
Play back your trial recording to make sure
the video and audio have been recorded
properly.
•
•
•
Recorded contents may be lost due to a
mistake when handling this camcorder
or memory card, etc. Samsung will not
provide compensation for damages due to
the loss of recorded contents.
Ex) Submenu item of “Video Quality”
page 50
•
Make a backup of important recorded
data.
- “Super Fine” ( ): Records in
the Super Fine quality. (If set, the
corresponding icon ( ) will appear
on the screen.)
Protect your important recorded data
by copying the files to a PC. We also
recommend you copy it from your PC to
other recording media for storage. Refer
to the software installation and USB
connection guide.
The following terms are used in this
manual:
•
‘Scene’ refers to the point where you
press the Record Start/Stop button to
start recording until you press again to
pause the recording.
•
The terms ‘photo’ and ‘still image’ are
used interchangeably and have the same
meaning.
iii
before reading this user manual
•
Copyrights: Please note that this
camcorder is intended for individual
use only.
Notes regarding trademarks
All the trade names and registered
•
Data recorded on the storage media in
this camcorder using other digital/analog
media or devices is protected by the
Copyright Act and cannot be used without
permission of the owner of the copyright,
except for personal enjoyment. Even if
you record an event such as a show,
performance, or exhibition for personal
enjoyment, we strongly recommend that
you obtain permission beforehand.
trademarks mentioned in this manual or
other documentation provided with your
Samsung product are trademarks or
registered trademarks of their respective
holders. Furthermore, “™” and “®” are not
mentioned in each case in this manual.
•
•
The SD logo is a trademark. The SDHC
logo is a trademark.
Microsoft®, Windows®, Windows Vista®,
Windows® 7, and DirectX® are either
registered trademarks or trademarks of
the Microsoft Corporation in the United
States and/or other countries.
•
We recommend you use the camcorder
at least once a month to maintain its
performance and operating life.
•
•
Check the image resolution before
developing photos.
•
Intel®, Core™, Core 2 Duo®, and
Pentium® are the registered trademarks or
trademarks of the Intel Corporation in the
United States and other countries.
Make sure to check all functions of the
camcorder before recording to prevent
recording failure.
•
•
AMD and Athlon™ are either registered
trademarks or trademarks of AMD in the
United States and other countries.
•
For Open Source licenses information,
refer to the “Opensource-T10.pdf” in the
provided CD-ROM
Macintosh, Mac OS are either registered
trademarks or trademarks of Apple Inc. in
the United States and/or other countries.
•
•
•
•
YouTube is a trademark of Google Inc.
Flickr is a trademark of Yahoo.
Facebook is a trademark of Facebook Inc.
HDMI, the HDMI logo and High-Definition
Multimedia Interface are trademarks or
registered trademarks of HDMI Licensing
LLC.
•
Adobe, the Adobe logo, and Adobe
Acrobat are either registered trademarks
or trademarks of Adobe Systems
Incorporated in the United States and/or
other countries.
iv
important safety instructions
This symbol indicates that dangerous
voltage consisting a risk of electric
shock is present within this unit.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This symbol indicates that there are
important operating and maintenance
instructions in the literature
accompanying this unit.
Warning
To Reduce The Risk Of Fire Or Electric Shock, Do Not Expose This Apparatus To Rain Or
Moisture.
Caution
Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such
as vases, shall be placed on the apparatus.
To disconnect the apparatus from the mains, the plug must be pulled out from the mains
socket, therefore the mains plug shall be readily operable.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
10. Protect the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles, and the point where they exit from
the apparatus.
11. Only use attachment/accessories specified by
4. Follow all instructions.
the manufacturer.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
12. Use only with the cart, stand, tripod, bracket, or
table specified by the manufacturer,
or sold with the apparatus.
7. Do not block any ventilation openings. Install in
When a cart is used, use caution
when moving the cart/apparatus
combination to avoid injury from tip-
over.
accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such
as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce
heat.
13. Unplug this apparatus during lightning storms or
when unused for long periods of time.
9. Do not defeat the safety purpose of the polarized
or grounding-type plug. A polarized plug has
two blades with one wider than the other. A
grounding type plug has two blades and a
third grounding prong. The wide blade or the
third prong are provided for your safety. If the
provided plug does not fit into your outlet,
consult an electrician for replacement of the
obsolete outlet.
14. Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has
been damaged in any way, such as power-
supply cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus,
the apparatus has been exposed to rain or
moisture, does not operate normally, or has
been dropped.
v
important safety instructions
15. Apparatus shall not be exposed to dripping or
splashing and no objects filled with liquids, such
as vases, shall be placed on the apparatus.
20. OUTDOOR ANTENNA GROUNDING:
CAMCORDER, be sure the antenna or cable
system is grounded to provide some protection
against voltage surges and built-up static
charges, Section 810 of the National Electrical
Code, ANSI/NFPA No. 70-1984, provides
information with respect to proper grounding of
the mast and supporting structure, grounding
of the lead-in wire and supporting structure,
grounding of the mast and supporting structure,
grounding of the lead-in wire to an antenna
discharge unit, size of grounding to conductors,
location of antenna-discharge unit, connection
to grounding electrodes and requirements for
the grounding electrode. See figure below.
16. VENTILATION:
Slots and openings in the cabinet are provided
for ventilation to ensure reliable operation
of the CAMCORDER and to protect it from
overheating. These openings must not
be blocked or covered. Never place your
CAMCORDER on a bed, sofa, rug, or other
similar surface: on or near a radiator or heat
register. This CAMCORDER should not be
placed in a built-in installation such as a
bookcase or rack unless proper ventilation is
provided or the manufacturer’s instructions have
been adhered to.
17. POWER SOURCES:
ANTENNA
LEAD IN
WIRE
The CAMCORDER should be operated only from
the type of power source indicated on the label.
If you are not sure of the type of power supply
at your home, consult your appliance dealer
or local power company. A CAMCORDER is
intended to be operated from battery power, or
other sources, refer to the operating instructions.
GROUND
CLAMP
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
ELECTRIC
SERVICE
GROUNDING CONDUCTORS
EQUIPMENT
(NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
NEC NATIONAL ELECTRICAL CODE
18. GROUNDING OR POLARIZATION:
This CAMCORDER may be equipped with
either a polarized 2-wire AC line plug (a plug
having one blade wider than the other) or a
3-wire grounding type plug, a plug having a third
(grounding) pin. If you are unable to insert the
plug fully into the outlet, try reversing the plug.
If the plug still fails to fit, contact your electrician
to replace your outlet. Do not defeat the safety
purpose of the polarized plug.
21. LIGHTNING:
For added protection of this CAMCORDER
during a lightning storm or when it is left
unattended and unused for long periods of time,
unplug it from the wall outlet and disconnect
the antenna or cable system. This will prevent
damage to the CAMCORDER due to lightning
and powerline surges.
19. POWER-CORD PROTECTION:
22. POWER LINES:
Power-supply cords should be routed so that
they are not likely to be walked on or pinched
by items placed upon or against them, paying
particular attention to cords or plugs, convenient
receptacles, and the point where they exit from
the unit.
An outside antenna system should not be
located in the vicinity of overhead power lines
or other electric light or power circuits where it
can fall into such power lines or circuits. When
installing an outside antenna system, extreme
care should be taken to keep from touching
such power lines or circuits as contact with
them might be fatal.
vi
23. OVERLOADING:
27. REPLACEMENT PARTS:
Do not overload wall outlets and extension
cords as this can result in a risk of fire or electric
shock.
When replacement parts are required, be sure
the service technician has used replacement
parts specified by the manufacturer and having
the same characteristics as the original part.
Unauthorized substitutions may result in fire,
electric shock or other hazards.
24. OBJECTS AND LIQUIDS:
Never push objects of any kind into this
CAMCORDER through openings as they may
touch dangerous voltage points or short out
a part that could result in a fire or electric
shock. Never spill liquids of any kind onto the
CAMCORDER. Should spillage occur, unplug
unit and have it checked by a technician before
use.
28. SAFETY CHECK:
Upon completion of any service or repairs to
this CAMCORDER, ask the service technician
to perform safety checks to determine that the
CAMCORDER is in safe operating order.
29. To prevent damage which may result in fire or
shock hazard, do not expose this appliance to
rain or moisture.
25. SERVICING:
Do not attempt to service this CAMCORDER
yourself. Opening or removing covers may
expose you to dangerous voltage or other
hazards. Refer all servicing to qualified service
personnel.
30. If this power supply is used at 240V ac, a
suitable plug adaptor should be used.
26. DAMAGE REQUIRING SERVICE:
Unplug this CAMCORDER from the wall outlet
and refer servicing to qualified service personnel
under the following conditions:
a. When the power-supply cord or plug is
damaged.
b. If any liquid has been spilled onto, or objects
have fallen into the CAMCORDER.
c. If the CAMCORDER has been exposed to
rain or water.
d. If the CAMCORDER does not operate
normally by following the operating
instructions, adjust only those controls that
are covered by the operating instructions.
Improper adjustment of other controls may
result in damage and will often require
extensive work by a qualified technician
to restore the CAMCORDER to its normal
operation.
e. If the CAMCORDER has been dropped or
the cabinet has been damaged.
f. When the CAMCORDER exhibits a distinct
change in performance, this indicates a need
for service.
vii
important safety instructions
USER INSTALLER CAUTION:
NOTE:
Your authority to operate this FCC certified
This equipment has been tested and found to
equipment could be voided if you make changes or
comply with the limits for a Class B digital device,
modifications not expressly approved by this party
pursuant to part 15 of the FCC Rules.
responsible for compliance to part 15 FCC rules.
These limits are designed to provide reasonable
NOTE:
protection against harmful interference in a
residential installation.
Hg LAMP(S) INSIDE THIS PRODUCT CONTAIN
MERCURY AND MUST BE RECYCLED OR
DISPOSED OF ACCORDING TO LOCAL,
STATE OR FEDERAL LAWS. For details
see lamprecycle.org, eiae.org, or call
1-800-Samsung (7267864)
This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used
in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference will
not occur in a particular installation.
If this equipment does cause harmful interference
to radio or television reception, which can be
determined by turning the equipment off and on, the
user is encouraged to try to correct the interference
by one or more of the following measures:
CALIFORNIA USA ONLY
This Perchlorate warning applies only to
primary CR (Manganese Dioxide) Lithium coin
cells in the product sold or distributed ONLY
in California USA
“ Perchlorate Material - special handling may
apply, See www.dtsc.ca.gov/hazardouswaste/
perchlorate.”
-
-
Reorient or relocate the receiving antenna.
Increase the separation between the equipment
and receiver.
-
Connect the equipment into an outlet on a
circuit different from that to which the receiver is
connected.
-
Consult the dealer or an experienced radio/TV
technician for help and for additional suggestions.
The user may find the following booklet prepared
by the Federal Communications Commission
helpful: “How to Identify and Resolve Radio-
TV Interference Problems.” This Booklet is
available from the U.S. Government Printing
Office, Washington, D.C. 20402, Stock No.
004-000-00345-4.
FCC Warning
The user is cautioned that changes or modifications
not expressly approved by the manufacturer could
void the user’s authority to operate the equipment.
This device complies with Part 15 of FCC Rules.
Operation is subject to the following two conditions;
(1) This device may not cause harmful interference,
and
(2) This device must accept any interference
received, including interference that may cause
undesired operation.
viii
safety information
The safety precautions illustrated below are to prevent personal injury or material damages.
Heed all instructions carefully.
WARNING
Prohibited action.
Do not touch the product.
Means that there is a potential
risk of serious personal injury.
Do not disassemble the
product.
This precaution must be
followed.
CAUTION
Means that there is a potential
risk of personal injury or
damage to the product.
Unplug from the power supply.
WARNING
W
4
W
4
Using the camcorder at
temperatures over 60 (140
may result in fire. Keeping the
battery at a high temperature
may cause an explosion.
℃
℉
)
Do not allow water or metal and
inflammable matter to enter the
camcorder or AC power adaptor.
Doing so may pose a fire hazard.
Do not overload outlets or
extension cords as this may
result in abnormal heat or fire.
W
4
Do not aim the camcorder directly
into the sun. Doing so could cause
eye injuries, as well as lead to
malfunctioning of internal parts of
the product.
No sand or dust! Fine sand or
dust entering the camcorder or
AC power adaptor could cause
malfunctions or defects.
No oil! Oil entering the camcorder
or AC power adaptor could cause
electric shock, malfunctions or
defects.
Do not bend the power cord or
damage the AC power adaptor by
pressing on it with a heavy object.
There may be a risk of fire or
electric shock.
Do not use the AC adaptor if it has
damaged, split or broken cords or
wires. Doing so may cause fire or
electric shock.
Do not disconnect the AC adaptor
by pulling on its power-cord, as this
could damage the power-cord.
ix
safety information
Never use cleaning fluid or similar
chemicals to clean the camcorder.
Do not spray cleaners directly on
the camcorder.
Do not connect the AC adaptor unless
the plug can be fully inserted with no
part of the blades exposed.
Do not dispose of the battery in a
fire as it may explode.
W
4
Keep the used lithium battery or
memory card out of the reach
of children. If the lithium battery
or memory card is swallowed
by a child, consult physician
immediately.
Keep the camcorder away from
water when using it near the beach
or pool or when it rains. There is a
risk of malfunction or electric shock.
Do not plug or unplug the power
cord with wet hands. There is a risk
of electric shock.
W
4
If the camcorder emits an abnormal
sound, or smell or smokes, unplug
the power-cord immediately and
request service from a Samsung
service center. There is a risk of fire
or personal injury.
When cleaning the AC adaptor,
unplug the power-cord. There is
a risk of malfunction or electric
shock.
Keep the power-cord unplugged
when not in use or during lightning
storms. There is a risk of fire.
W
4
If the camcorder malfunctions,
immediately detach the AC adaptor
or battery from the camcorder.
There is a risk of fire or injury.
Do not attempt to disassemble,
repair, or modify the camcorder or
the AC adaptor to avoid a risk of
fire or electric shock.
x
CAUTION
W
4
Do not drop or expose the
Do not use the camcorder on a
tripod (not supplied) in a place
where it is subject to severe
vibrations or impact.
Do not press the surface of the
LCD with force, or hit it with a sharp
object. If you push the LCD surface,
display unevenness may occur.
camcorder, battery, AC adaptor,
or other accessories to severe
vibrations or impact. This may
cause a malfunction or injury.
W
4
Do not use the camcorder in direct
sunlight or near heating equipment.
This may cause a malfunction or
injury.
Do not expose the camcorder to
soot or steam. Thick soot or steam
could damage the camcorder case
or cause a malfunction.
Do not leave the camcorder in
a closed vehicle for a long time,
where the temperature is very high.
W
4
Do not expose the camcorder to
insecticide. Insecticide entering the
camcorder could cause the product
to operate abnormally. Turn the
camcorder off and cover it with vinyl
sheet, etc. before using insecticide.
Do not use the camcorder near dense
exhaust gas generated by gasoline or
diesel engines, or near a corrosive gas
such as hydrogen sulphide. Doing so
may corrode the external or internal
terminals, disabling normal operation.
Do not expose the camcorder to
sudden changes in temperature or
high humidity. There is also a risk of
defect or electric shock when using
outdoors during lightning storms.
W
4
Do not wipe the camcorder body
with benzene or thinner. The
exterior coating could peel off or
the surface could deteriorate.
Do not place the camcorder with
the open LCD screen down.
xi
Do not leave the LCD screen open
when not using the camcorder
.
safety information
W
4
W
4
Do not use the camcorder near sources
of strong radio waves or magnetism
such as speakers or large motors. Noise
from these sources could distort the
video or audio you are recording.
Do not hold the camcorder by the
LCD monitor when lifting it. The
LCD screen could detach and the
camcorder may fall.
Do not use the camcorder near a TV
or radio: This could cause distortion
on the TV screen or interference in
the radio broadcasts.
w
T
W
4
Use Samsung-approved accessories
only. Using products from other
manufacturers may cause
overheating, fire, explosion, electric
shock or personal injuries caused by
abnormal operation.
Keep important data separately.
Samsung is not responsible for
data loss.
Place the camcorder on a stable
surface that is well ventilated.
W
4
Only plug the adaptor plug into a socket
that is easily accessible. If any problem
occurs with the product, you must pull
the plug out of the socket to disconnect
the power completely. Turning off the
power button on the product does not
completely disconnect the power.
xii
contents
07
You can record videos in H.264 format!
QUICK START GUIDE
07
11
12
14
What’s included with your camcorder
Location of controls
Identifying the screen displays
GETTING TO KNOW THE
CAMCORDER
11
17
18
19
Inserting/ejecting the battery
Charging the battery
Checking the battery state
GETTING STARTED
17
22
23
24
24
25
Turning your camcorder on/off
Switching to the power saving mode
Setting the operation modes
BASIC OPERATION OF THE
CAMCORDER
Using the Display(
) button
Using the touch panel
22
26
Setting the time zone and date/time for
the first time
Selecting the languages
FIRST TIME SETTINGS
27
26
28
Inserting / ejecting a memory card
(not supplied)
Selecting a suitable memory card
(not supplied)
GETTING READY TO START
RECORDING
29
31
32
32
33
Recordable time and capacity
Using the hand strap
Adjusting the LCD screen
Basic camcorder positioning
28
3
contents
34
36
37
38
Recording videos
Capturing photos during video recording
Recording photos
Recording with ease for beginners
(smart auto)
Zooming
BASIC RECORDING
34
39
40
41
43
Changing the playback mode
Playing back videos
Viewing photos
BASIC PLAYBACK
40
45
46
48
Handling menus and quick menus
Menu items
Quick menu items
USING THE MENU ITEMS
45
49
50
50
51
51
52
53
54
55
55
56
57
58
59
60
61
62
62
63
63
64
65
SCENE
ADVANCED RECORDING
Video Resolution
Video Quality
Photo Resolution
Photo Sharpness
White Balance
Aperture
Shutter
EV
Super C.Nite
Back Light
Focus
Anti-Shake (OIS: Optical Image Stabilizer)
Digital Effect
Fader
Tele Macro
Cont. Shot
Wind Cut
Digital Zoom
Self Timer
49
4
Quick View
Guideline
66
67
68
68
Play Option
Highlight
Slide Show Option
File Info
ADVANCED PLAYBACK
66
69
70
71
72
Deleting files
Protection from accidental erasure
Dividing a video
EDITING FILES
Combining videos
69
73
74
74
75
75
76
76
76
77
77
78
79
79
80
81
82
82
83
83
84
84
85
85
86
Setting menu items
Card Info
Format
File No.
Time Zone
Date/Time Set
Date Type
Time Type
Date/Time Display
LCD Brightness
Auto LCD Off
Beep Sound
Shutter Sound
Auto Power Off
Quick On STBY
PC Software
USB Connect
HDMI TV Out
TV Connect Guide
TV Display
SYSTEM SETTING
73
Default Set
Language
Demo
Anynet+ (HDMI-CEC)
5
contents
87
Connecting to a high definition TV with
HDMI
CONNECTING TO A TV
89
90
Connecting to a regular TV
Viewing on a TV screen
87
91
Dubbing to a VCR or DVD/HDD recorder
Direct printing with a PictBridge printer
DUBBING VIDEOS
91
92
PRINTING PHOTOS
92
94
95
What you can do with a windows computer
Using the Intelli-studio program
USING WITH A WINDOWS
COMPUTER
100 Using as a removable storage device
94
102 Warning indicators and messages
107 Symptoms and solutions
TROUBLESHOOTING
113 Maintenance
114 Using your camcorder abroad
MAINTENANCE &
ADDITIONAL INFORMATION
115 Specifications
SPECIFICATIONS
6
quick start guide
This quick start guide introduces the basic operation and features of your camcorder. See the
reference pages for more information.
You can record videos in H.264 format!
You can record videos in H.264 format that is convenient to email and share with your friends
and family. You can also take photos with your camcorder.
STEP 1: Get ready
1. Insert the battery to the camcorder. page 17
•
Make sure that the SAMSUNG logo is facing up
and the battery is placed as shown in the figure.
2. Charge the battery fully. page 18
•
The battery is fully charged when the CHG
(charging) indicator light turns green.
3. Insert a memory card. page 28
•
You can use commercially available SDHC (SD
High Capacity) or SD memory cards with this
camcorder.
STEP 2: Record with your camcorder
Zoom(W/T) lever
Zoom (W/T)
button
PHOTO button
Recording start/stop button
Recording start/
stop button
MODE button/
Mode indicator
LCD screen
Your camcorder turns on when you open the LCD screen.
7
quick start guide
Recording videos
Your camcorder uses advanced H.264
compression technology to give you the
clearest video quality.
Recording photos
1. Open the LCD screen.
2. Press the PHOTO button lightly to
adjust the focus.
1. Open the LCD screen.
3. Fully press the PHOTO button when
2. Press the Recording start/stop
the subject is in focus.
button.
•
To stop recording, press the
Recording start/stop button.
00:00:00
[307Min]
9999
Using ‘Quick On STBY’ by opening/closing the LCD screen.
When you close the LCD screen during standby, your camcorder goes to Quick On STBY
mode (power saving mode). You can start recording quickly when you open the LCD screen.
page 81
•
•
The default video resolution setting is “1080/60i.” You can also record in SD (standard
definition) video quality.
You can also take photos while recording videos. page 36
8
STEP 3: Play back videos or photos
Viewing videos or photos on the LCD screen
You can find recordings quickly by using the thumbnail index view.
1. Touch the Play (
) tab on the screen in STBY mode.
HD
SD
2. Touch the thumbnail (
/
/
) tab, then touch the desired image.
STBY 00:00:00
[307Min]
9999
HD
SD
3/3
Viewing on a high definition TV
You can enjoy HD (high definition) videos on an HDTV.
page 87
You can also play back videos on an SD (standard definition) image quality TV. page 89
STEP 4: Save recorded videos or photos
Simple and fun! Enjoy the various features of the internal
Intelli-studio program on your Windows computer.
Using the Intelli-studio program built into your camcorder, you
can import videos/photos into your computer and edit or share
the videos/photos with your friends and family. For details, see
pages 94-101
9
quick start guide
Importing and viewing videos/photos from the
camcorder to your PC
Contents Manager
Saved files into your PC
1. Launch the Intelli-studio program by
connecting the camcorder to your PC with a
USB cable.
•
A new file saving screen appears with the
Intelli-studio main window. Click “Yes”, and
the uploading procedure starts.
2. The new files are saved to your PC and
registered to “Contents Manager” on the
Intelli-studio program.
•
You can arrange the files by different criteria
such as Face, Date, etc.
Folders directory on your PC
3. Double-click on the file you would like to
playback.
Sharing videos/photos on YouTube/Flickr/
FaceBook
Share your contents with the world by uploading videos and photos directly to a web
site with one click.
Click “Share” “Upload” tab on the browser. page 99
Intelli-studio runs automatically after you connect your camcorder to a Windows computer if
you have set “PC Software: On” in the Settings menu. page 82
STEP 5: Delete videos or photos
If the storage media is full, you cannot record new videos or photos. Delete videos or
photos that you have saved to a computer from the camcorder’s storage media. Then
you can record new videos or photos on newly freed up space.
Touch the Play (
) tab Menu (
) tab “Delete” on the LCD screen. page 69
10
getting to know the camcorder
WHAT'S INCLUDED WITH YOUR CAMCORDER
Your new camcorder comes with the following accessories. If any of these items is missing from
your box, call Samsung’s Customer Care Center.
Model name
Color
Memory card slot
LCD screen
Lens
HMX-T10WN
HMX-T10BN
HMX-T10ON
White
Black
Orange
10x (Optical)
100x (Digital)
Yes
Color /Touch panel
•
Although some features of the models are different, they operate in the
same way.
Checking your accessories
Battery
(BP125A)
(AD43-00197A)
AC power adaptor
(AA-MA9 type)
(AD44-00151A)
Audio/Video cable
(AD39-00184A)
USB cable
(AD39-00169A)
Optional accessories
Hand strap
(AD63-04924A)
User manual CD
(AD46-00355A)
Quick start guide
(AD68-05486A)
Mini HDMI cable
(AD39-00159A)
•
•
•
The exact appearance of each item may vary by model.
The contents may vary depending on the sales region.
Parts and accessories can be purchased after consulting with your local Samsung dealer.
SAMSUNG is not responsible for reduced battery life time or malfunctions caused by any
unauthorized use of accessories such as the AC power adaptor or the batteries.
A memory card is not included. See page 29 for memory cards compatible with your camcorder.
Your camcorder includes the user manual CD and the printed quick start guide.
•
•
11
getting to know the camcorder
LOCATION OF CONTROLS
Front/Left
Lens
Internal microphone
Display button
Power button
AUTO
SMART
button
TFT LCD screen
(Touch screen)
Q.MENU button
Zoom (W/T) button
Recording start/stop button
Internal speaker
During a recording, be careful not to block the internal microphone and lens.
12
Rear/Right/Top/Bottom
Zoom (W/T) lever
PHOTO button
Recording
start/stop
button
Charging (CHG) indicator
DC IN jack
Jack cover (DC IN)
MODE button /
Mode indicator
•
: Record mode
(Video/Photo)
: Play mode
USB, HDMI, AV(Audio/Video) jack
Jack cover (USB, HDMI, AV)
•
Hand strap hook
Tripod receptacle
Battery/Memory card cover
OPEN/CLOSE switch
Memory card slot
Battery slot
Battery release switch
13
getting to know the camcorder
IDENTIFYING THE SCREEN DISPLAYS
The available functions vary depending on the operation mode you’ve selected. Different indicators appear
depending on the setting values.
PRECHECK!
•
•
This On Screen Display (OSD) is shown in the record (
) mode only.
Select the record mode by pressing the MODE button. page 24
Record mode
Center of the LCD screen
STBY
00:00:00
[307Min]
9999
Indicator
Meaning
00:00:00
Time counter (video recording time)
Warning indicators and messages
Card Full
[307Min]
Remaining recordable time
Optical zoom / Digital zoom bar
Time Zone (visit)
F2
Card Full
-
0.3
JAN/01/2010 12:00AM
JAN/01/2010 12:00AM
Date/Time
Left of the LCD screen
Indicator
Right of the LCD screen
Indicator
Meaning
Meaning
Storage media (Memory card)
Record mode (Video/Photo)
/
Operating status (standby/recording)
/ Self Timer*
Battery info. (remaining charge level)
STBY
/ /
Image counter (total number of
recordable photo images),
Photo Resolution, Video Quality,
Video Resolution
,
,
,
9999
SCENE / Smart Auto / Digital Effect
White Balance, Fader*
/
/
,
,
Manual focus*, Touch Point*
Anti-shake(OIS)
Manual aperture* / Manual shutter* /
Super C.Nite
,
Tele Macro*, Back Light
Cont. Shot, Wind Cut
Photo Sharpness
Menu tab
F2
/
S.1/60 /
,
EV (Exposure Value)*
Play tab
- 0.3
•
•
•
•
•
•
•
•
Settings of functions marked with * are not retained when the camcorder is turned off.
The on-screen indicators are based on an 32GB SDHC memory card capacity.
The screen above is an example and may differ from the actual display.
For warning indicators and messages, see pages 102~106
The illustrated items above and their positions can be changed without notice to improve performance.
The total number of recordable photos is based on available space on the storage media.
The largest number the OSD Image Counter can display is “9,999.”
14
This camcorder provides one record mode which combines the video and photo record modes. You can easily record videos or photos in
the same mode without having to change it.
PRECHECK!
HD
SD
•
•
This On Screen Display (OSD) is shown in video play (
Select the Play (
/
) mode only.
HD
SD
) tab on the LCD screen to select the video play (
/
) mode. page 40
Video play mode
Top of the LCD screen
Indicator
Meaning
00:00:05/00:00:50
_
100 0001
Video play mode
JAN/01/2010 12:00AM
Operating status (play/pause)
Playback time/recorded time
Storage media (Memory card)
,
00:00:05/00:00:50
Battery info. (remaining charge level)
Play Option
100_0001
File name (file number)
Video Quality, Video Resolution
Protect
,
Bottom of the LCD screen
JAN/01/2010 12:00AM Date/Time
Indicator
Meaning
10
Volume control
Volume tab / Play related function
tab (frame advance)
/
Return tab
Play related function tab (skip/
search/pause/playback/slow
playback)
Menu tab
•
•
The play related tab, the volume control, and the return tab appear briefly on the screen.
They reappear when you touch the screen anywhere.
For warning indicators and messages, see pages 102~106
15
getting to know the camcorder
PRECHECK!
•
•
This On Screen Display (OSD) is shown in photo play ( ) mode only.
Select the Play (
) tab on the LCD screen to select the photo play ( ) mode. page 40
Photo play mode
Top of the LCD screen
Indicator
1/10
Meaning
_
100 0001
Photo play mode
JAN/01/2010 12:00AM
X1.1
Slide show / Playback zoom (X1.1~X8.0)
File name (file number)
/
100_0001
1/10
Photo image counter (current image /
total number of recorded images)
Storage media (memory card)
Battery info.
Erase protection
Photo resolution
Date/Time
Bottom of the LCD screen
Indicator
Meaning
JAN/01/2010 12:00AM
Volume tab (when activating slide show)
Return tab
Previous image/Next image tab
Slide show start tab
Menu tab
16
getting started
INSERTING/EJECTING THE BATTERY
Purchase extra batteries to allow continuous use of your camcorder.
Battery release switch
To insert the battery
To eject the battery
1. Open the battery cover by sliding the
1. Open the battery cover by sliding the
OPEN/CLOSE switch toward OPEN.
OPEN/CLOSE switch toward OPEN.
2. Slide the Battery release switch in the
2. Insert the battery into the battery slot until
direction as shown in the figure.
it locks.
•
Make sure that the SAMSUNG logo is
facing up and the battery is placed as
shown in the figure.
3. Close the battery cover by sliding the
OPEN/CLOSE switch toward CLOSE.
3. Close the battery cover by sliding the
OPEN/CLOSE switch toward CLOSE.
Samsung is not responsible for problems that are caused by using unapproved batteries. If you use
batteries from other manufacturers, there is a danger of overheating, fire, or explosion.
17
getting started
CHARGING THE BATTERY
You can charge the battery using the AC power adaptor or the USB cable.
PRECHECK!
•
•
Insert the battery into the camcorder. page 17
To charge, use the supplied AC power adaptor or the USB cable.
To charge the battery
Charge the battery using the AC power adaptor or the USB cable.
•
The charging (CHG) indicator lights up and charging starts. After the battery is fully charged,
the charging (CHG) indicator turns green.
Using the AC power adaptor
Using the USB cable
Connect the AC power adaptor to the camcorder
properly, and then plug the AC Power adaptor in the
wall outlet.
Connect the USB cable to the camcorder properly,
and then connect the other end to a USB port of a
PC.
Please make sure that there are no foreign substances in the plug and socket when you connect the AC
power supply to the camcorder.
•
•
When charging, if both the USB cable and AC power adaptor are connected, the AC power adaptor will
override the USB.
You cannot operate the camcorder using USB power only. Use the power adaptor or battery to power the
camcorder.
•
•
USB charging time may depend on the type of USB host on your PC.
If you use the camcorder while you are charging the battery, charging may take longer.
18
CHECKING THE BATTERY STATE
You can check the charging state and remaining battery capacity.
To check the charging state
The color of the LED indicates the power or
charging state.
(Orange)
(Green)
Charging
Fully charged
Error
(Off)
Battery level display
The battery level display shows the amount of battery power remaining in the battery.
STBY 00:00:00
[307Min]
9999
Battery level
indicator
State
Message
Fully charged
25~50% used
50~75% used
75~95% used
95~98% used
-
-
-
-
-
Exhausted (flickers):
The device will soon turn off.
-
Change the battery as soon as possible.
The device will be forced to turn off
after 3 seconds.
“Low
Battery”
-
The figures above are based on a fully charged battery at a normal temperature. Low ambient
temperature may affect the use time.
19
getting started
Available running time for the battery
Battery type
BP125A
Using the AC power adaptor: approx. 120 min.
Using the USB cable: approx. 270 min.
Charging time
Video resolution
HD
SD
Continuous recording time
Playback time
Approx. 110 min.
Approx. 140 min.
Approx. 120 min.
Approx. 160 min.
•
•
Charging time: Approximate time in minutes required to fully charge a completely exhausted
battery.
Recording/Playback time: Approximate time available when you have fully charged the
battery.
‘HD’ stands for high definition image quality and ‘SD’ stands for standard image quality.
The time is only for reference. Times shown above are measured under Samsung’s test
conditions. Your times may differ, depending on your usage and conditions.
The recording and playback times will be shorter when you use your camcorder in low
temperatures.
•
•
Continuous Recording (without zoom)
The continuous recording time above shows the available recording time when you record
without using any other function after recording starts.
The battery may discharge 2-3 times faster than this reference if you use the record start/stop,
the zoom, and the play functions. Prepare additional batteries with the expectation that the
actual recording time is about 1/3 to 1/2 of the times listed above.
Using an AC power source
We recommend that you use the AC power adaptor to power the camcorder from a household
AC outlet when recording and playing the camcorder indoors. The connection is the same as
that for battery charging. page 18
20
About the battery
• Battery Properties
A lithium-ion battery is small-sized and has a high capacity. Low ambient temperature (below 50ºF
(10Cº)) may shorten its usage time and affect its function. Before recording in low temperatures, put
the battery into your pocket to warm it, then install it in the camcorder.
• Make sure to store the battery separately after use.
-
-
-
A small amount of battery power is consumed when the battery is stored in the camcorder even
if the camcorder power is off.
The battery may be completely discharged, if it has been installed and left in the camcorder for a
long period of time. If this occurs, the battery may not fully operate even if you charge it.
If the battery is not used for a long time, fully charge the battery and then, using your camcorder,
drain the charge completely once every 3 months to keep the battery functioning properly. To
store the battery, remove it from your camcorder and put it in a cool, dry place.
• Charge an extra battery before using the camcorder outdoors in cold temperatures.
-
The cold temperature may shorten the length of time you can use the battery before needing to
recharge it.
-
Carry the supplied AC power adaptor to charge the battery while travelling.
• Check whether the battery terminal is damaged if the battery falls or is dropped.
-
If you install a battery with the damaged terminal into the camcorder, you can damage the
camcorder.
• Remove the battery and the memory card from the camcorder and disconnect the AC power
adaptor after use.
-
Store the battery in a stable, cool and dry place.
(Recommended temperature : 59ºF ~ 77ºF (15Cº~ 25Cº), recommended humidity: 40%~ 60%)
Temperatures that are too high or too low shorten the battery lifetime.
The battery terminals can become rusty or malfunction if the battery is stored in a smoky or dusty
location.
-
-
• Recyle or dispose of your dead batteries properly.
• The battery lifetime is limited.
-
Battery capacity decreases over time and through repeated use. If decreased usage time
between charges becomes significant, it is probably time to replace the battery with a new one.
Each battery’s life is affected by storage, operating, and environmental conditions.
-
•
•
•
Make sure to turn off the camcorder before disconnecting the AC power adaptor. Otherwise, you
can damage the storage media or data.
Use a nearby wall outlet when using the AC power adaptor. Disconnect the AC power adaptor
from the wall outlet immediately if any malfunction occurs while using your camcorder.
Do not place the AC Adaptor in a confined space when you use it, such as between a wall and a
piece of furniture.
•
•
Be sure to use the included AC power adaptor to power the camcorder. Using other AC power
adaptors could cause electric shock or result in fire.
You can use the AC power adaptor around the world. An AC plug adaptor is required in some
foreign countries. If you need one, purchase it from your distributor.
•
•
The charging time will vary depending on the charge remaining in the battery.
The battery is charged over 95% after about 2 hours, and the indicator color changes to green. It
takes about 2 hours and 40 minutes for the battery to charge 100%.
21
basic operation of the camcorder
TURNING YOUR CAMCORDER ON/OFF
LCD screen
1. Open the LCD screen to turn on the
camcorder.
•
Your camcorder turns on
automatically when you open the
LCD screen.
2. To turn off the camcorder, press the
Power ( ) button for about one
second.
Power button
•
The camcorder operates the self-diagnosis function when powered on. If a warning message
appears, refer to ‘warning indicators and messages’ (pages 102~106) and take corrective actions.
If you close the LCD screen when the power is on, the power saving mode activates. page 23
The camcorder turns on automatically if connecting the AC power adaptor or inserting the battery
to the camcorder with the LCD screen open.
•
•
When using this camcorder for the first time
When you use your camcorder for the first time or reset it, the time zone screen appears at start-up.
Select your geographical location, and then set the date and time. page 26
If you do not set the date and time, the time zone screen appears every time you turn on the camcorder.
22
SWITCHING TO THE POWER SAVING MODE
If you need to use the camcorder for an extended time, the following functions enable you to
prevent unnecessary energy consumption.
Quick On STBY Mode in the STBY mode
The camcorder switches to "Quick On STBY"
mode when you close the LCD screen. page 81
Sleep mode in the Play mode (includes the thumbnail index view)
•
The camcorder switches to the sleep mode when you close the LCD screen and then, if idle
for more than 20 minutes, the camcorder turns off. However, if “Auto Power Off: 5 Min” is
set, the camcorder turns off in 5 minutes.
•
If you open the LCD screen or connect a cable to the camcorder when the camcorder is in
sleep mode, the camcorder returns to the last active operation mode.
After 20 minutes
LCD screen is closed
<Sleep mode>
<Power off>
•
•
The power saving mode does not work in the following situations:
-
-
-
When the camcorder has a cable connection. (Audio/Video cable, Mini HDMI, or USB, etc.)
While recording, playing back, or while running a slideshow.
When the LCD screen is opened.
The camcorder consumes less battery power in the power saving mode. However, if you plan to
use the camcorder for an extended time, we recommend you turn off the camcorder by pressing
the Power ( ) button when not using it.
23
basic operation of the camcorder
SETTING THE OPERATION MODES
You switch the operating mode in the following order each time you press the MODE button.
Record mode (
)
Play mode ( ).
↔
•
•
Each time the operation mode changes, the respective mode indicator lights turn on.
Touching the Play (
) tab in the record mode switches the operation mode to the play mode.
MODE button / Mode indicators
•
(Record mode):
To record videos or photos.
(Play mode):
00:00:00
99[39097Min]
STBY
•
To play videos or photos, or edit them.
Play tab
This camcorder provides one record mode which combines the video and photo record modes.
You can easily record videos or photos in the same mode without having to change modes.
USING THE DISPLAY( ) BUTTON
When the power is on, press the Display ( ) button to display or hide the on-screen
information or not.
Switching the information display mode
Press the Display(
) button.
The full and minimum display modes alternate.
Full display mode
Minimum display mode
STBY 00:00:00
[307Min]
9999
STBY
•
•
Warning indicators and messages may appear depending on the recording conditions.
The Display ( ) button does not work when the menu or quick menu screen is being displayed.
24
USING THE TOUCH PANEL
The touch panel lets you playback
and record with a simple touch of your
finger. Place your hand on the rear
side of the LCD screen, then touch
the items displayed on the screen.
Touch
STBY 00:00:00
[307Min]
9999
Slightly touch items with your finger to select
them or to execute functions.
•
•
Do not place a protective film on the LCD screen.
If you leave a film attached to the LCD screen for a long time, strong adhesion between the film and
the surface of the screen may cause a malfunction of the touch panel.
•
•
Be careful not to accidentally press the buttons near the LCD panel while using the touch panel.
The tabs and indicators that appear on the LCD screen depend on the current recording/playback
status of your camcorder.
•
The camcorder does not recognize touches if you touch more than two points on the screen at the
same time. Touch one point at a time.
25
first time settings
SETTING THE TIME ZONE AND DATE/TIME
FOR THE FIRST TIME
Set the date and time of your local area when you turn on the
Home
camcorder for the first time.
London,Lisbon
1. Open the LCD screen to turn on the camcorder.
[GMT 00:00] JAN/01/2010 12:00AM
•
The time zone (“Home”) screen appears displaying settings for
Lisbon and London (Greenwich Mean Time).
2. Select your local area on the map by touching the left ( ) or right
(
•
) tab on the LCD screen, and then press the (
The “Date/Time Set” screen appears.
) tab.
Date/Time Set
Month
Day
Year
JAN
Hr
/
01
/
2010
Min
3. Touch the date and time information, and then change the setting
12
:
00
AM
values by using the up ( ) or down ( ) tabs.
4. Make sure the clock is correctly set, and then touch the (
The message “Date/Time Set” appears.
) tab.
•
Date/Time Set
Date/Time Set
JAN/01/2010 12:00AM
•
•
•
You can set the year up to 2037, based on the “Home” item.
Set “Date/Time Display” to On. page 77
Activating the ( ) icon moves the time forward by 1 hour.
Internal rechargeable battery
•
•
Your camcorder includes a internal rechargeable battery that retains the date and time settings even
after the power is turned off.
If the battery is depleted, the current date/time values are reset to the default values. If this occurs, you
need to recharge the internal rechargeable battery (see below), and then re-set the current date and time.
Charging the internal rechargeable battery
•
•
The internal battery is always recharged while your camcorder is connected to the AC power or while
the battery is attached.
If you have not used the camcorder for about 2 weeks and you have not connected the AC power
or the battery to it, the internal battery fully discharges. If this occurs, charge the internal battery by
connecting the camcorder to the supplied AC adaptor for 24 hours.
26
SELECTING THE LANGUAGES
You can select the language of the menu or messages displayed on the LCD screen.
The camcorder retains the language setting even when you turn it off.
1. Touch the Menu (
) Setting ( ) tab.
Language
2. Touch the up ( )/down ( ) tab until “Language” appears.
Demo
3. Touch “Language,” and then touch the desired OSD language.
6/6
Anynet+(HDMI-CEC)
4. Touch the Exit ( ) or Return (
The camcorder displays the menus and messages in the
language you selected.
) tab to complete the setting.
•
Language
English
한국어
1/8
Français
Deutsch
Supported languages
Ελληνικά
Srpski
日本語
ไทย
English
Português
Polski
Čeština
한국어
Nederlands
Svenska
Suomi
Français
Deutsch
Italiano
Slovensky
Magyar
Hrvatski
Українська
Русский
中文
Türkçe
Română
Български
Norsk
Español
Dansk
•
•
“Language” options may be changed without a prior notice.
The camcorder retains the language you select even when not connected to the battery or AC
power.
•
The date and time format may change depending on the language you selected.
27
getting ready to start recording
INSERTING / EJECTING A MEMORY CARD
(NOT SUPPLIED)
Terminal portion
To insert a memory card
To eject a memory card
1. Open the memory card cover by sliding
1. Open the memory card cover by sliding
the OPEN/CLOSE switch toward OPEN.
the OPEN/CLOSE switch toward OPEN.
2. Insert the memory card into the card slot
2. Gently push the memory card to eject it.
until it softly clicks.
3. Close the memory card cover by sliding
•
Make sure that the camcorder is
placed as shown above and the term-
inal portion of the card is facing up.
the OPEN/CLOSE switch toward CLOSE.
3. Close the memory card cover by sliding
the OPEN/CLOSE switch toward CLOSE.
•
•
To avoid data loss, turn off the camcorder by pressing the Power ( ) button for one second
before inserting or ejecting the memory card.
Be careful not to push the memory card too hard. The memory card may suddenly pop out.
Your camcorder supports only SD (Secure Digital) and SDHC (Secure Digital High Capacity) cards.
Card compatibility may vary depending on the manufacturer and the type of memory card.
28
SELECTING A SUITABLE MEMORY CARD
(NOT SUPPLIED)
Compatible memory cards
Usable memory card (1GB~32GB)
•
You can use SD (Secure Digital) and
SDHC (Secure Digital High Capacity)
cards with this camcorder.
Terminals
Terminals
We recommend you use an SDHC (Secure
Digital High Capacity) card.
Protection
tab
Protection
tab
This camcorder supports SD cards up
to 2GB. We cannot guarantee normal
operation with SD cards bigger than 2GB.
MMC (Multi Media Card) and MMC Plus
are not supported.
<SD>
<SDHC>
•
•
Compatible memory card capacity:
SD: 1GB ~ 2GB
SDHC: 4GB ~ 32GB
Use compatible memory card brands.
Others are not guaranteed to work. A list
of compatible brands is below:
SDHC (Secure Digital High Capacity) cards
•
An SDHC card is a higher version
(Ver. 2.00) of the SD card and supports
capacities above 2GB.
•
•
SDHC cards cannot be used with current
SD enabled host devices.
-
SDHC/SD cards: Panasonic, SanDisk,
TOSHIBA
•
•
For video recording, use a memory card
that supports faster write speeds (above
SDHC Class 6 card).
Common cautions for memory cards
•
Damaged data may not be recoverable.
We recommend you make a back-up of
important data separately on the hard disk
of your PC.
SD/SDHC memory cards have a
mechanical write-protection switch.
Setting the switch prevents accidental
erasure of files recorded on the card. To
enable writing, move the switch up in the
direction of the terminals. To set write
protection, move the switch down.
•
•
Turning the power off or removing a
memory card during an operation such
as formatting, deleting, recording, and
playback may cause data loss.
If you modify the name of a file or folder
stored in the memory card with your PC,
your camcorder may not recognize the
modified file.
29
getting ready to start recording
Handling a memory card
The camcorder supports SD and
•
We recommend that you power off before
inserting or removing the memory card to
avoid data loss.
SDHC memory cards, giving you a
wider choice of cards to choose from!
The data storage speed may differ,
depending on the manufacturer and
production system.
•
We can not guarantee that you can use
memory cards formatted by other devices.
When you format a card, be sure to format
the memory card using this camcorder.
You must format newly-purchased
memory cards, memory cards with data
that your camcorder cannot recognize,
and cards with data saved by other
devices. Note that formatting erases all
data on the memory card.
•
SLC (single level cell) system: faster
write speed enabled.
•
•
MLC (multi level cell) system: only
lower write speed is supported.
For best results, we recommend using a
memory card that supports a faster write
speed.
Using a lower write speed memory card
for recording video may cause difficulties
when storing.
You may even lose your video data during
the recording.
In an attempt to preserve every bit of the
recorded video, the camcorder forcibly
stores the video on the memory card and
displays a warning:
“Low speed card. Please record at a
lower resolution.”
If you are unavoidably using a low speed
memory card, the resolution and quality
of the recording may be lower than the
value you set. page 50
The higher the video resolution and
quality, the more memory the camcorder
uses.
•
•
If you cannot use a memory card that has
been used with another device, format it
with your camcorder. Note that formatting
erases all information on the memory card.
A memory card has a certain life span. If
you cannot record new data, you have to
purchase a new memory card.
•
•
Do not bend, drop, or subject the card to
strong impacts.
Do not place foreign substances on the
memory card terminals. Use a soft dry
cloth to clean the terminals if required.
Do not paste anything other than the label
provided with the card on the label pasting
area of the card.
•
•
•
Do not use a damaged memory card.
Be careful to keep the memory card out of
the reach of children, who might swallow it.
•
•
Samsung is not responsible for data loss due to misuse, including loss caused by any PC virus.
We recommend using a memory card case to avoid data loss that can be caused by moving the
card or by static electricity.
30
•
After a period of use, the memory card may get warm. This is normal and is not a malfunction.
RECORDABLE TIME AND CAPACITY
Listed below are the available video recording times and the number of photos the camcorder
can take, by card memory size and resolution. Refer to the recordable video time and the
number of photos when recording videos or taking photos.
Recording time available for video in minutes
Storage media (Capacity)
Resolution
Quality
1GB
8
2GB
15
4GB
30
8GB
61
16GB
125
152
193
177
235
351
521
688
1011
32GB
253
Super Fine
Fine
1080/60i
9
18
36
74
307
Normal
Super Fine
Fine
12
11
14
21
32
42
62
23
46
94
390
21
42
86
357
720/60p
480/60p
28
57
115
171
254
336
494
475
Normal
Super Fine
Fine
42
84
708
63
126
166
244
1051
1387
2039
83
Normal
123
(Unit: Approximate minutes of recording)
Recordable number of photos
Storage media (Capacity)
Resolution
1GB
656
2GB
1251
2346
4GB
2482
4654
8GB
5014
9402
16GB
9999
9999
32GB
9999
9999
2880x1620
1920x1080
1173
(Unit: Approximate number of images)
≒
1GB
1,000,000,000 bytes : Actual formatted capacity may be less as the internal firmware uses
a portion of the memory.
•
•
•
•
•
•
•
Actual recording times may differ depending on the recording conditions and the subject.
The higher the quality and resolution, the more memory is used.
Lower resolution and quality increases the recording time, but the image quality may suffer.
The bit rate automatically adjusts to the recording image. Accordingly, the recording time may vary.
Memory cards bigger than 32GB may not operate normally.
When a video file exceeds 1.8GB, a new video file is created automatically.
The maximum number of recordable photo and video files is 9999 respectively.
31
getting ready to start recording
USING THE HAND STRAP
Attach the strap and place your hand through the loop to prevent the camcorder from being
dropped.
Insert the end of the hand strap into the hook
of the camcorder as shown in the illustration.
1
2
ADJUSTING THE LCD SCREEN
The wide LCD screen on your camcorder offers high quality image viewing.
1. Open the LCD screen with your finger.
•
The screen opens up to 90°.
2. With the LCD screen open 90°, rotate it
forwards (towards the lens) or backwards.
•
You can rotate it up to 180° towards
the lens and up to 90° backward. To
view recordings more conveniently,
rotate the screen by 180° towards the
lens, and then fold it back to the body.
Excessive rotation may damage the connective hinge between the screen and the camcorder.
Clean fingerprints or dust on the screen with a soft cloth.
32
BASIC CAMCORDER POSITIONING
Use both hands while taking a video or photo to prevent the camcorder from shaking.
Try to avoid any slight movement while shooting.
Aim the camcorder as shown in the
illustration.
1. Loop the hand strap around your wrist.
2. Hold the camcorder with both your hands.
3. Make sure your footing is stable and there
is no danger of colliding with another
person or object.
4. Aim and focus as shown in the illustration.
Adjusting the shooting angle
<Low angle>
<High angle>
<Self-recording>
•
This camcorder’s lens angle is approx. 20˚ higher than the rest of the camcorder body. When you
record, this prevents strain on the wrist and allows you to record videos in a comfortable position
with a clear view of your subjects while you record.
•
•
Make sure the camcorder lens is angled for proper shooting.
We recommend you keep the sun behind you while shooting.
33
basic recording
RECORDING VIDEOS
This camcorder supports both High Definition (HD) and Standard Definition (SD) image
resolutions. Set the resolution you want before recording. page 50
PRECHECK!
•
•
Insert a memory card. page 28
Select the record mode by pressing the MODE button. page 24
Two recording start/stop buttons to suit your preference!
This camcorder features two Recording start/stop buttons.
One is on the rear side of the camcorder, the other is on the
LCD screen. Select the one that works best for you.
1. Select a subject to record.
00:00:00
[307Min]
•
•
Adjust the LCD panel to the best angle for recording.
Use the Zoom lever or Zoom button to adjust the size of the
subject. page 39
2. Press the Recording start/stop button.
The recording ( ) indicator appears, and recording starts.
•
STBY 00:00:00
[307Min]
9999
3. To stop recording, press the Recording start/stop button again.
4. Touch the Quick View ( ) icon to view the most recently
recorded video.
•
After the Quick View is complete, your camcorder returns to
the standby mode.
34
•
•
If power is interrupted or an error occurs during recording, the video may not be recorded/edited.
Samsung is not responsible for any damage caused by a failure of normal recording or playback
operations because of a memory card error.
•
•
Note that damaged data cannot be recovered.
Do not turn off the camcorder or remove the memory card while the camcorder is accessing the
memory card. Doing so may damage the memory card or the data in the memory card.
•
•
Videos are compressed in the H.264 (MPEG-4.AVC) format.
Eject the battery when you have finished recording to prevent unnecessary battery power
consumption.
•
•
•
For the on-screen information display, see page 14
For approximate recording time, see page 31.
Sound is recorded by the internal stereo microphone located on the front of the camcorder.
Make sure that the microphone is not blocked.
•
Before recording an important video, make sure to test the recording function to see if there are
any problems with the audio or video recording.
•
•
For various functions available during recording, see pages 49~65
If the power cable/battery is disconnected or recording is interrupted, the camcorder switches to
the data recovery mode. While data is being recovered, no other function is enabled.
You can adjust the brightness of the LCD screen in the menu options. Adjusting the LCD screen
does not affect the image being recorded. page 77
In the record mode, you can set the Quick View menu option. The Quick View icon appears when
you have set the Quick View menu option to On.
•
•
•
The menu setting tabs shown on the LCD screen do not affect the image the camcorder is
recording.
35
basic recording
CAPTURING PHOTOS DURING VIDEO RECORDING
Your camcorder can capture photos without interrupting video recording.
PRECHECK!
•
•
Insert a memory card. page 28
Select the record mode by pressing the MODE button.
page 24
1. Press the Recording start/stop button.
•
The recording ( ) indicator appears, and recording
starts.
00:00:00
[307Min]
2. While recording the video, frame the scene you want to
photograph, and then press the PHOTO button.
•
•
When the (
) indicator disappears, the camcorder has
recorded the photo image without a shutter sound.
Video keeps recording, even while you take photos.
00:00:32
[307Min]
3. To stop recording, press the Recording start/stop button again.
•
•
Photos are captured in 1920x1080 resolution regardless of the resolution of the video recording.
When the HDMI cable is connected to the camcorder, you cannot capture a photo while recording
a video.
36
RECORDING PHOTOS
You can take photos and store them in the storage media. Set the desired resolution before
recording. page 51
PRECHECK!
•
•
Insert a memory card. page 28
Select the record mode by pressing the MODE button. page 24
1. Select a subject to record.
•
•
Adjust the LCD panel to the best angle for recording.
Use the Zoom lever or Zoom button to adjust the size of
the subject. page 39
2. Frame the subject in the LCD screen, and then half-press the
PHOTO button.
9999
•
When the subject is in focus, ( ) indicator appears green.
If it appears red, readjust the focus.
3. Fully press the PHOTO button.
4. Touch the Quick View ( ) icon to view the most recently
STBY 00:00:00
[307Min]
recorded photo.
9999
•
To return to the standby mode, touch the Return (
) tab.
Do not turn off the camcorder or remove the memory card when taking photos as it may damage the
storage media or data.
•
The recordable number of photos varies depending on the recording conditions and the photo
resolution. page 31
•
•
•
•
The camcorder does not record audio when you take photos.
If focusing is difficult, use the manual focus function. page 57
For the on-screen display information, see page 14.
Adjust the brightness of the LCD screen using menu items. Adjusting the brightness does not affect
the recorded image. page 77
•
•
For various functions available during recording, see pages 49~65
Photo files conform to the DCF (Design rule for Camera File system) standard, established by JEITA
(Japan Electronics and Information Technology Industries Association).
37
basic recording
RECORDING WITH EASE FOR BEGINNERS (SMART AUTO)
In Smart Auto mode, your camcorder automatically chooses the appropriate settings based
on the type of scene it detects (Indoor, Night, etc.). Smart Auto mode is helpful if you are not
familiar with the best camcorder settings for various scenes.
1. Press the SMART AUTO button.
•
The Smart Auto ( ) and Anti-shake(OIS) (
icon appear on the LCD screen.
)
2. Align your subject in the frame.
•
The camcorder automatically detects the scene
when you align the subject.
•
The appropriate scene icon appears on the LCD
screen.
STBY 00:00:00
[307Min]
9999
Appears when recording a very bright scene. (White)
Appears when recording an outdoor scene. (Landscape)
Appears when recording indoors. (Indoor)
<When recording a close-up>
Appears when recording at night. (Night)
Appears when recording a close-up. (Macro)
Appears when recording images of landscapes with
backlighting. (Backlight)
3. Press the Recording start/stop button or PHOTO button. pages 34, 37
4. To cancel Smart Auto mode, press the SMART AUTO button again.
•
Buttons unavailable during Smart Auto operation: Menu (
Most settings are automatically adjusted in Smart Auto mode. To set or adjust functions on your own,
release the Smart Auto mode first.
) tab / Q.MENU button/ etc.
•
•
•
You can not access Smart Auto mode while recording. You must set this function before recording.
When the camcorder fails to recognize the recording situation, it records in the basic settings (
).
The camcorder may not select the correct scene depending on shooting conditions, such as camcorder
shake, lighting, and distance to the subject.
•
If the camcorder detects more than one scene at the same time, Smart Auto prioritizes as follows:
Backlight Macro White Landscape Night Indoor
For example, a) If White and Indoor can be applied at the same time, then White is selected and the
corresponding icon appears.
b) If White and Landscape can be applied at the same time, then White is selected and the
corresponding icon appears.
38
ZOOMING
This camcorder allows you to record using optical 10x
power zoom and digital zoom by sliding the Zoom lever or
pressing the Zoom button on the LCD panel.
To zoom in
To zoom out
Press the T (zoom) button on the LCD panel or slide
the zoom lever towards T (telephoto).
Press the W (zoom) button on the LCD panel or
slide the zoom lever towards W (wide angle).
•
•
The distant subject is gradually magnified.
The highest zoom magnification ratio is 10x in the
normal zoom-in.
•
•
The subject gets smaller and further away.
The smallest optical zoom ratio is the subject’s
original size when zoomed-out.
W : Wide angle
T : Telephoto
Zoom speed
When using the zoom function, you can decrease zoom speed by slowly moving the Zoom (W/T) lever. Moving it faster increases
the zoom speed. However, you cannot adjust the zoom speed when using the Zoom (W/T) button on the LCD panel.
•
•
•
Using the optical zoom does not degrade the image quality and clarity.
Use the digital zoom when you want to zoom more than the optical zoom range. page 63
Focusing may become unstable when you record with a fast zoom or zoom into a subject standing
too far away. If this occurs, use the manual focus function. page 57
The minimum distance you can have between the camcorder and subject while maintaining sharp
focus is about 1cm (about 0.4 inches) for wide angle and about 50cm (about 19.7 inches) for
telephoto. If you want to shoot the subject close to the lens at a wide angle, use the Tele Macro
function. page 61
•
•
When using the zoom function and holding the camcorder with your hand, use Anti-shake(OIS) for
stable recording. page 58
•
•
Frequent use of the zoom function consumes more power.
The camcorder can record the sound of the zoom mechanism.
39
basic playback
CHANGING THE PLAYBACK MODE
•
You can set the record mode and the play mode in turn with the MODE button.
You can also switch the operation mode directly into the playback thumbnail display by touching the
Play (
) tab on the LCD screen.
•
•
The most recently created file is highlighted in the thumbnail view.
The camcorder selects the thumbnail display options based on the standby mode that was last used.
However, you can choose the video (HD or SD) or photo thumbnail view display options by touching the
HD ( HD ), SD ( SD ), or photo (
) tab on the LCD screen.
Understanding how to change the operation modes
You can easily change the operation modes by touching the LCD screen or using the buttons as
shown in the following figures:
STBY 00:00:00
[307Min]
9999
HD
SD
HD
SD
3/3
3/3
HD
SD
To change thumbnail display type
You can choose from these thumbnail display options: 3x2 (
), 4x3 (
), and Date (
).
HD
SD
HD
SD
HD
SD
JAN/01/2010 (17)
3/3
2/2
2/2
<3X2 type>
<4X3 type>
<Sorted by date>
40
PLAYING BACK VIDEOS
You can preview recorded videos in the thumbnail index view, find the video you want quickly,
and playback directly.
PRECHECK!
•
•
Insert a memory card. page 28
Touch the Play ( ) tab on the LCD screen to select the play mode. page 40
1. Touch the HD ( HD ) or SD ( SD ) tab.
HD
SD
•
Video thumbnails corresponding to the video resolution you
selected appear on the screen.
•
To change the current thumbnail page, touch the up ( ) or
down ( ) tab.
3/3
2. Touch the thumbnail of the desired video clip.
•
The camcorder plays the video you selected and playback
control tabs appear briefly. They reappear when you touch
anywhere on the screen.
00:00:05/00:00:50
100 0013
_
•
To stop playback and return to the thumbnails, touch the
Return ( ) tab.
Do not power off the camcorder or eject the memory card during video playback. Doing so may
damage the recorded data.
•
•
It may take some time to start playback, depending on the size and quality of the selected video.
The camcorder may not play the following video files:
-
-
A video recorded on another device.
A video whose file format is not supported by the camcorder.
•
•
•
•
You can use various play options during the video playback. page 42
You can set playback settings using the “Play Option” menu. page 66
You can play the recorded videos on a TV or PC. pages 87, 98
If you touch the Menu (
screen appears.
) tab or Q.MENU button during playback, play is paused and the menu
41
basic playback
Various playback operations
Playback / Pause / Stop
•
•
Playback and pause alternate when you touch the Pause (
Touch the Return ( ) tab to stop playback.
) / Play (
) tab during playback.
Search playback
00:00:05/00:00:50
100 0013
_
During playback, each touch of the Reverse search (
Forward search ( ) tab increases the play speed:
) /
•
RPS (Reverse Playback Search)/FPS (Forward Playback Search) rate:
x2 x4 x8 x2
Skip playback
Touch the Reverse skip (
) / Forward skip (
) tab plays the next video.
) plays the beginning of the scene. If you touch the Reverse skip (
) tab during playback.
•
•
Touching the Forward skip (
Touching the Reverse skip (
) for
three seconds or less after a video starts, the camcorder plays the previous video.
Place and hold your finger on the Reverse skip ( ) / Forward skip ( ) tab to search for a video number
quickly. When you lift off your finger, the camcorder plays the video you selected.
•
Slow playback
When playback is paused, touching the Reverse slow (
00:00:05/00:00:50
100 0013
) /
_
Forward slow (
) tab reduces the playback speed:
•
Reverse/forward playback slow rate: x1/2 x1/4 x1/8 x1/2
Frame by frame playback
When playback is paused, touch the Reverse frame advance (
) / Forward
frame advance (
) to make the video go in reverse or forward one frame at a time.
00:00:05/00:00:50
100 0013
To adjust the volume
You can hear the recorded sound from the internal speaker.
_
1. Touch the Volume (
2. Touch the ( )/(
) tab on the LCD screen.
) tab to increase or decrease audio volume.
•
You can adjust the sound level between “0~19.” When the level is at
“0,” you cannot hear sound.
00:00:05/00:00:50
100 0013
_
10
•
•
Touch the Play (
) tab to play back in normal speed.
42
You can hear the recorded sound only when you playback at normal speed.
VIEWING PHOTOS
You can view recorded photos using various playback functions.
PRECHECK!
•
•
Insert a memory card. page 28
Touch the Play ( ) tab on the LCD screen to select the play mode. page 40
1. Touch the Photo ( ) tab.
HD
SD
•
•
The thumbnail view appears.
To change the current thumbnail page, touch the up ( ) or
down ( ) tab.
3/3
2. Touch the photo you want to display.
•
The camcorder displays the photo you selected in full screen
and playback control tabs appear briefly. They reappear when
you touch anywhere on the screen.
HD
SD
3/3
3. To return to the thumbnails, touch the Return (
) tab.
14/17
_
100 0014
Do not power off the camcorder or eject the memory card during photo playback. Doing so may
damage the recorded data.
•
•
Loading time may vary depending on the size and quality of the photo you selected.
Your camcorder may not play back the following photo files normally:
-
-
A photo recorded on another device.
A photo with a file format not supported by this camcorder. (One that does not conform to DCF
standards.)
•
Touch previous image (
) / next image (
) tab to view the previous and next photo.
43
basic playback
Viewing a slide show
You can view a photo slide show with background music.
14/17
_
100 0014
Touch the Slide Show (
) tab during photo playback.
•
The ( ) indicator appears. The slide show starts from the current selected
photo.
•
To stop the slide show, touch the Return (
) tab.
To start a slide show in the menu screen
Touch the Menu ( ) tab
14/17
_
100 0014
“Slide Show Start.”
Slide Show Start
Slide Show Option
Delete
1/2
Protect
•
•
All photos are played back depending on the slide show options. page 68
If you select the thumbnail display by date (
corresponding date in the slide show.
), the camcorder plays back only photos taken on the
•
You can adjust the background music’s volume level using the Volume (
slide show with music.
) tab while playing back the
Zooming during photo playback
You can magnify a playback image. Touch up/down/left/right to
select the area to magnify.
14/17
_
100 0014
1. Touch the photo you want to magnify.
•
The camcorder displays the selected photo on the full screen.
2. Adjust the magnification with the Zoom (W/T) button or Zoom
(W/T) lever.
•
•
Magnification starts from the center of the photo.
You can zoom in from x1.1 to x8.0.
X 3.0
3. Touch the up ( )/down ( )/left ( )/right ( ) tab to view the
area you want on the magnified photo.
4. To cancel, touch the Return (
) tab.
•
•
Photos recorded on other devices or those edited on a PC cannot be magnified.
While the playback zoom is in use, other images cannot be selected.
44
using the menu items
HANDLING MENUS AND QUICK MENUS
The instructions below are examples of how to access and use menu
items using the Menu Tab and the Q.MENU Button. When you access
and use other menu items, use these examples as guides.
STBY 00:00:00
[307Min]
9999
PRECHECK!
•
•
Insert a memory card. page 28
Select the record mode by pressing the MODE button. page 24
Q.MENU button
Menu tab
Using the Menu ( ) tab
1. Touch the Menu (
) tab on the touch panel.
The menu screen appears.
•
•
SCENE
To change the current page, touch the up ( )/down (
tab.
)
Video Resolutio
Video Quality
1/6
2. Touch “ SCENE.” (The SCENE function is used here as an
Photo Resolution
example.)
SCENE
3. Touch the desired option.
•
•
Adjust the setting values accordingly.
Auto
To exit the menu, touch the Exit ( ) or Return ( ) tab.
Sports
Portrait
Spotlight
1/2
Using the Q.MENU button
Quick menu enables you to access your favorite functions quickly.
You can easily select the desired menu with one-touch.
Video
Photo
SCENE
Resolution
Resolution
1. Press the Q.MENU button on your camcorder to see the
EV
Focus
WB
available menu options.
•
The quick menu screen appears.
2. Touch “Focus.” (The Focus function is used here as an example.)
Focus
3. Touch the desired option.
•
•
Adjust the setting values accordingly.
To exit the menu, touch the Exit ( ) or Return ( ) tab.
Manual
Touch Point
Auto
•
•
When using Menu or Quick menu items, some menu items can not be used at the same time, or may be
grayed out. For more information, see Troubleshooting on page 112.
For easy understanding, the menu setting procedures on this page are explained using the simplest
methods. Menu setting methods can differ depending on the menu options you choose.
45
using the menu items
MENU ITEMS
•
•
The items available in each menu vary depending on the operating mode.
For item operation details, see the page number listed under Page in the table.
Recording menu items
Items
SCENE
Default value
Auto
1080/60i
Fine
Page
49
50
50
51
51
52
53
54
55
55
56
57
58
59
60
61
62
62
63
63
64
65
Video Resolution
Video Quality
Photo Resolution
Photo Sharpness
White Balance
Aperture
2880x1620
Normal
Auto
Auto
Auto
0
Shutter
EV
Super C.Nite
Back Light
Focus
Normal
Off
Auto
On
Anti-Shake(OIS)
Digital Effect
Fader
Off
Off
Tele Macro
Cont. Shot
Wind Cut
Off
Off
Off
Digital Zoom
Self Timer
Off
Off
Quick View
Guideline
On
Off
46
Playback menu items
Operation
Video
Photo
Thumbnail
mode
Default
value
Page
Thumbnail
Single
Single
Items
Play Option
Highlight
Delete
X
X
X
X
X
X
Play All
66
67
69
-
-
X
X
Protect
Off (Single) 70
Divide
Combine
File Info
-
-
-
-
-
71
72
68
44
68
Edit
X
X
X
Slide Show Start
Slide Show Option
X
X
: available, X : not available
•
•
Menu options and default values may be changed without prior notice.
Some grey colored menu options cannot be selected. page 112
47
using the menu items
QUICK MENU ITEMS
•
•
The items available in each menu vary depending on the operating mode.
For item operation details, see the page number listed under Page in the table.
Recording menu items
Items
SCENE
Default value
Auto
Page
49
Video Resolution
Photo Resolution
WB
1080/60i
2880x1620
Auto
50
51
52
EV
0
55
Focus
Auto
57
Playback menu items
Operation
mode
Video
Thumbnail
Photo
Page
Single
Thumbnail
Single
Item
Highlight
X
X
X
X
X
67
69
70
71
72
68
Delete
Protect
Divide
Combine
File Info
Edit
X
X
: available, x : not available
Menu options and default values may be changed without a prior notice.
48
advanced recording
SCENE
Using the iScene function, you can select a setting that matches the scene you are shooting
(Sports, Portrait, etc.). Based on your selection, the camcorder sets the appropriate shutter
speed and aperture automatically for optimal recording.
PRECHECK!
Select the record mode by pressing the MODE button. page 24
1. Touch the Menu (
) tab “ SCENE.”
SCENE
Auto
2. Touch the desired submenu item.
Sports
Portrait
Spotlight
•
To change the current page, touch the up ( )/down (
tab.
)
1/2
3. To exit the menu, touch the Exit ( ) or Return (
) tab.
Submenu items
•
•
•
•
Auto: For recording under normal conditions.
Sports ( ): For recording people or objects in motion.
Portrait ( ): For recording portraits. Captures natural skin tones.
Spotlight ( ): When strong light strikes the subject. On stage, for
example.
•
Beach/Snow ( ): Where the reflection of light is intense such as a
snowfield or beach.
•
•
•
Food ( ): To make food more colorful.
Candle Light ( ): For recording in the soft glow of candlelight.
Indoor ( ): For recording indoors with artificial light.
When you specify “Aperture: Manual” or “Shutter: Manual,” the SCENE mode is cancelled.
49
advanced recording
Video Resolution
You can select the resolution of the video to be recorded.
PRECHECK!
Select the record mode by pressing the MODE button. page 24
1. Touch the Menu (
) tab “Video Resolution.”
Video Resolution
1080/60i
2. Touch the desired submenu item.
720/60p
480/60p
3. To exit the menu, touch the Exit ( ) or Return (
) tab.
1/1
Submenu items
•
•
•
1080/60i ( ): Records in the HD (1920x1080/60i) format.
720/60p ( ): Records in the HD (1280x720/60p) format.
480/60p ( ): Records in the SD (720x480/60p) format.
•
•
•
“60i” indicates the camcorder will record in interlaced scan mode at 60 fields per second.
“60p” indicates the camcorder will record in progressive scan mode at 60 frames per second.
Recorded files are encoded using Variable Bit Rate (VBR). VBR is an encoding system that
automatically adjusts the bit rate in response to the image being recorded.
•
The available video recording time differs according to the video resolution you select. page 31
Video Quality
You can select the quality of the video to be recorded.
PRECHECK!
Select the record mode by pressing the MODE button. page 24
1. Touch the Menu (
) tab “Video Quality.”
Video Quality
Super Fine
2. Touch the desired submenu item.
Fine
3. To exit the menu, touch the Exit ( ) or Return (
) tab.
1/1
Normal
Submenu items
•
•
•
Super Fine ( ): Records videos in super fine image quality.
Fine ( ): Records videos in fine image quality.
Normal ( ): Records videos in normal image quality.
The higher the resolution is, the shorter the available recording time. On the other hand, the lower the
resolution, the longer the available recording time.
50
Photo Resolution
You can select the resolution of the photo to be recorded.
PRECHECK!
Select the record mode by pressing the MODE button. page 24
1. Touch the Menu (
) tab “Photo Resolution.”
Photo Resolution
2880x1620
1920x1080
2. Touch the desired submenu item.
3. To exit the menu, touch the Exit ( ) or Return (
) tab.
1/1
Submenu items
•
•
2880x1620 (
1920x1080 (
): Records in the 2880x1620 resolution.
): Records in the 1920x1080 resolution.
•
•
The number of recordable images differs according to the photo resolution you select. page 31
Photos that are recorded on your camcorder may not playback properly on other digital devices
that do not support these photo sizes.
Photo Sharpness
This function lets you create more sharper or softer image by processing the captured image
when you take a photo.
PRECHECK!
Select the record mode by pressing the MODE button. page 24
1. Touch the Menu (
) tab “Photo Sharpness.”
Photo Sharpness
Soft
2. Touch the desired submenu item.
Normal
Sharp
3. To exit the menu, touch the Exit ( ) or Return (
) tab.
1/1
Submenu items
•
•
Soft ( ): Smooths the edges of photo images. Makes image softer.
Normal ( ): The photo images appear with sharp edges and are
suitable for printing.
•
Sharp ( ): Sharpens the edges in photo images further.
51
advanced recording
White Balance
Using the White Balance function, you can select a setting that matches the light illuminating the subject
you are shooting (Daylight, Fluorescent, etc.). Based on your selection, the camcorder automatically
adjusts the color of the subject so the whites and colors in your recording or photo look natural.
PRECHECK!
White Balance
Select the record mode by pressing the MODE button. page 24
Auto
1. Touch the Menu (
) tab “White Balance.”
Daylight
Cloudy
1/2
2. Touch the desired submenu item.
Fluorescent
3. To exit the menu, touch the Exit ( ) or Return (
) tab.
Submenu items
•
•
•
•
•
•
Auto: Controls the white balance automatically in response to lighting conditions.
Daylight ( ): For recording outdoors in clear, natural light.
Cloudy ( ): For recording in the shade or cloudy weather.
Fluorescent ( ): For recording under white fluorescent lights.
Tungsten ( ): For recording under halogen lamps and incandescent lights.
Custom WB ( ): Lets you adjust the white balance manually to match the light source or situation.
Understanding White Balance
The White Balance (WB) process removes unrealistic color casts, so that white objects are rendered
white in your image and all other colors look natural. Proper white balance has to take into account the
“color temperature” of a light source, which refers to the relative warmth or coolness of white light.
To set the white balance manually
1. Touch the Menu (
) tab “White Balance” “Custom WB.”
White Balance
Tungsten
Custom WB
•
The “( ) Set White Balance” indicator appears.
2. Fill the screen with a white subject, and then touch the (
The camcorder stores the white balance setting.
) tab.
•
2/2
3. To exit the menu, touch the Exit ( ) or Return (
) tab.
•
The camcorder applies the stored white balance the next time you record.
•
When setting the white balance manually, the subject must be white, otherwise, your camcorder may not detect an
appropriate setting value.
•
•
•
•
The adjusted setting remains until you set the white balance again.
During normal outdoor recording, setting White Balance to “Auto” may provide better results.
Cancel the digital zoom function for clear and precise white balance setting. page 63
Reset the white balance if light conditions change.
52
Aperture
The camcorder adjusts the aperture (lens opening) automatically depending on the subject and
recording conditions. You can also manually adjust the aperture.
PRECHECK!
Select the record mode by pressing the MODE button. page 24
1. Touch the Menu (
) tab “Aperture.”
Aperture
Auto
2. Touch the desired submenu item.
Manual
3. To exit the menu, touch the Exit ( ) or Return (
) tab.
1/1
Submenu items
•
•
Auto: Sets the aperture value automatically.
Manual ( ): Touch the decrease ( ) or increase (
) tab
to adjust the aperture. You can choose from the
following settings:
F1.8, F2, F2.8, F4, F5.6, F8, F11, F16
Understanding Aperture
You can adjust the aperture value to control the amount of light reaching the image sensor. The smaller
the aperture value, the greater the amount of light. For example, F1.8 lets in more light than F2.8.
You need to adjust the aperture value in the following cases:
•
•
•
When you are shooting against the light or when the background is too bright.
When you are shooting on a reflective natural background such as at the beach or when skiing.
When the background is overly dark (for example, scenery at night).
•
•
When you specify “Aperture: Manual,” the SCENE mode is cancelled, “Super C.Nite” is set to
“Off,” and “Shutter” is set to “Auto” automatically.
If the aperture is set to manual, the aperture value changes depending on the zoom level you
change.
53
advanced recording
Shutter
The camcorder automatically sets the shutter speed depending on the scene’s brightness. User
high shutter speeds to record fast moving objects and low shutter speeds to record slow or
stationary objects or objects in dimmer light.
PRECHECK!
Select the record mode by pressing the MODE button. page 24
1. Touch the Menu (
) tab “Shutter.”
Shutter
Auto
2. Touch the desired submenu item.
Manual
3. To exit the menu, touch the Exit ( ) or Return (
) tab.
1/1
Submenu items
•
Auto: The camcorder automatically sets the appropriate shutter
speed value.
•
Manual ( ): Touch the decrease ( ) or increase ( ) tab to
adjust the setting values. You can choose from the
following settings: 1/60,1/100, 1/250, 1/500, 1/1000,
1/2000, 1/4000, or 1/10000.
•
•
The image may not seem smooth when you set a high shutter speed.
When recording at a shutter speed of 1/1000 or lower, make sure the sun is not shining directly
into the lens. As the shutter speed gets slower, the camcorder can be harmed by too much light.
When you specify “Shutter: Manual,” the SCENE mode is cancelled, “Super C.Nite” is set to “Off,”
and “Aperture” is set to “Auto” automatically.
•
•
Even if the shutter speed is set to 1/10000, the camcorder supports only up to 1/2000 while
photos.
recording
54
EV
Depending on the intensity of the ambient light, your videos and photos may be too bright or
dark. Using the EV function, you can manually adjust video and photo image brightness.
PRECHECK!
Select the record mode by pressing the MODE button. page 24
1. Touch the Menu (
) tab “EV.”
EV
2. Touch the decrease ( ) or increase ( ) tab to adjust the
setting values. You can choose from the following settings:
0
•
EV values ( ): -2.0, -1.6, -1.3, -1.0, -0.6, -0.3, 0, +0.3, +0.6,
+1.0, +1.3, +1.6, +2.0
3. To exit the menu, touch the Exit ( ) or Return ( ) tab.
Understanding EV (Exposure Value)
Exposure value is the total amount of light allowed to fall
on the photographic medium (Image sensor) during the
process of taking photos or videos. The higher the number,
the greater the exposure. For example, + 0.3 lets in more
light than -0.3.
Darker (-)
0
Brighter (+)
Super C.Nite
Use to get better images of slowly moving subjects or subjects in dark places. When you turn
the Super C.Nite function on, the camcorder adjusts the shutter speed so that the images are
brighter without compromising color.
PRECHECK!
Select the record mode by pressing the MODE button. page 24
1. Touch the Menu (
) tab “Super C.Nite.”
Super C.Nite
2. Touch the desired submenu item.
Off
OFF
Normal
Super
3. To exit the menu, touch the Exit ( ) or Return (
) tab.
1/1
SUPER
Submenu items
•
•
Off: Disables the function.
Normal ( ): The shutter opens for 1/60 of a second in the normal mode and
automatically switches to open for 1/30 of a second in a dark place. Use this
function to get bright images in a dark place.
•
Super (SUPER ): The shutter opens for 1/15 of a second regardless of surrounding
conditions. Use this function to get bright images in a darker place.
55
advanced recording
Back Light
When a subject is lit from behind, this function compensates for back lighting so that the
subject does not appear too dark.
PRECHECK!
Select the record mode by pressing the MODE button. page 24
1. Touch the Menu (
) tab “Back Light.”
Back Light
OFF Off
On
2. Touch the desired submenu item.
3. To exit the menu, touch the Exit ( ) or Return (
) tab.
1/1
Submenu items
•
•
Off: Disables the function.
On ( ) Backlight compensation brightens the subject.
:
Back lighting causes the subject to be darker than the background
It typically occurs when:
•
•
The subject is in front of a window.
The person you want to record is wearing white or shiny
clothes and is placed against a bright background. The
person’s face is too dark to distinguish his/her features.
The subject is outdoors and the background is overcast.
The light sources are too bright.
•
•
•
The subject is in front of a snowy background.
56
Focus
The camcorder usually focuses on a subject automatically (auto focus). When you turn the
camcorder on, focus is always set to automatic. You can also set the focus manually.
PRECHECK!
Select the record mode by pressing the MODE button. page 24
Focus
1. Touch the Menu (
) tab “Focus."
Auto
Manual
2. Touch the desired submenu item.
1/1
Touch Point
3. To exit the menu, touch the Exit ( ) or Return ( ) tab.
Submenu items
•
•
•
Auto: In most situations, it is better to use the automatic focus feature, as it lets you concentrate on the
creative side of your recording.
Manual ( ): You may need to focus manually under conditions in which automatic focusing is difficult or
unreliable. Touch (
) or (
) tab to adjust the focus.
Touch Point ( ): To focus on a subject shown on the LCD screen, simply touch the subject on the screen.
Focusing manually during recording
Your camcorder automatically focuses a subject from close-up to infinity. However, the camcorder may not
focus correctly, depending on the recording conditions. If it does not focus correctly, use the manual focus
mode. To adjust the focus, place and hold your finger on the (
tab for a farther subject.
) for a nearer subject, and on the (
)
•
•
The nearer or farther icon (
The camcorder applies the adjusted value right after you touch the (
/
) appears in the center when focus adjustment reaches the end.
) or (
) tab.
Manual
10CM
Manual
10CM
<Nearer subject>
<Farther subject>
Scenes to set focus manually for
•
•
•
•
Scenes containing several objects, some close to the camcorder, others farther away.
Scenes with a person enveloped in fog or surrounded by snow.
Scenes which contain very shiny or glossy surfaces such as that of a car.
Scenes with people or objects moving constantly or quickly such as athletic events or crowd scenes.
57
advanced recording
Using the touch point function
Using the Touch Point function, you can have the camcorder focus on a small
section of the picture. You get the camcorder to focus on a particular point by
touching the desired point on the LCD screen.
STBY 00:00:00
[307Min]
9999
To activate the touch point with a long touch
You can activate touch point by lightly pressing a particular point on the LCD
screen for about 2 seconds.
•
•
•
The Auto Focus (AF) setting is useful when you operate the zoom function because you might not be able to keep
accurate focus after the zoom ratio has been changed.
In the manual focus setting menu screen, you can access auto focus by touching the AF (
) tab on the screen.
You can return to manual focus by touching the manual focusing tabs.
If you have enabled the Touch Point function, you can reset the focus to Auto by touching the AF
) tab on the LCD screen.
(
Anti-Shake (OIS: Optical Image Stabilizer)
Smart OIS improves on existing Optical Image Stabilization by allowing the camcorder lens to shift
over wider range of motion in wide/tele zoom position. This allows the camcorder to compensate
for greater degrees of camcorder shake and delivers a stunning level of image smoothness.
PRECHECK!
Select the record mode by pressing the MODE button. page 24
Anti-Shake(OIS)
1. Touch the Menu (
) tab “Anti-Shake(OIS).”
Off
On
2. Touch the desired submenu item.
1/1
3. To exit the menu, touch the Exit ( ) or Return (
) tab.
Submenu items
•
•
Off: Disables the function.
:
On (
)
The Anti-Shake(OIS) function is enabled to compensate for shaking.
Use the Anti-Shake(OIS) function in the following cases
•
•
•
When recording while walking or riding in a moving car.
When recording with the zoom function.
When recording subjects of a small size.
58
•
•
When you turn on Smart Auto mode, it automatically sets Anti-shake (OIS) to On.
The Anti-Shake (OIS) function may not correct gross camcorder shake entirely. To decrease shake,
hold the camcorder firmly with both hands.
•
•
When this function is On, the actual movement of the subject and the movement displayed on the
screen may be slightly different.
When you record in dark or dim light at high magnification while this function is On, after-
images may stand out. If this occurs, we recommend using a tripod (not supplied) and turning
Anti-shake (OIS) to Off.
Digital Effect
Using the Digital Effect function gives your recording a creative look.
PRECHECK!
Select the record mode by pressing the MODE button. page 24
1. Touch the Menu (
) tab “Digital Effect.”
Digital Effect
Off
2. Touch the desired submenu item.
Black & White
Sepia
3. To exit the menu, touch the Exit ( ) or Return (
) tab.
1/2
Negative
Examples of 5 Digital Effect options
Off
Negative (
This mode reverses the colors,
creating a negative image.
)
Without any Digital Effect, the
image retains a normal, natural
look.
Black & White (
This mode changes the image to
black and white.
)
Art (
)
This mode helps adjust for facial
imperfections.
Sepia (
)
This mode gives the image an
old-time, reddish brown look.
59
advanced recording
Fader
You can give your recording a professional look by using special effects such as fade in at the
beginning of a sequence or fade out at the end of a sequence.
PRECHECK!
Select the record mode by pressing the MODE button. page 24
1. Touch the Menu (
) tab “Fader.”
Fader
Off
2. Touch the desired submenu item.
In
3. To exit the menu, touch the Exit ( ) or Return (
) tab.
1/1
Out
In-Out
Submenu items
•
•
•
•
Off: Disables the function
In ( ): As soon as you start recording, the recording fades in.
Out ( ): When the recording is done, it fades out.
In-Out ( ): When you start or stop recording, the recording fades
in or fades out accordingly.
Recording a video with Fade effect
Fade in
Fade In (Approx.3 seconds)
With “Fader” set to “In,” press the Recording start/
stop button. The recording starts with a dark screen,
and then the image and sound fade in.
Fade out
With “Fader” set to “Out,” press the Recording
start/stop button to stop recording. The image and
sound fade out, the screen goes black, and then the recording stops.
Fade Out (Approx. 3 seconds)
Fade in-out
With “Fader” set to “In-Out,” press the Recording start/stop button.
The recording starts with a dark screen, and then the image and sound fade in.
To stop recording, press the Recording start/stop button.
The image and sound fade out, the screen goes black, and then the recording stops.
The camcorder automatically turns the Fader function off after it has been used once. You must reset
it each time you want to use it.
60
Tele Macro
Using the Tele Macro function, you can get close up images which are created by focusing on
a small portion of a large object at a wide angle. It is useful to get close up images of flowers or
insects etc.
PRECHECK!
Select the record mode by pressing the MODE button. page 24
1. Touch the Menu (
) tab “Tele Macro.”
Tele Macro
Off
On
2. Touch the desired submenu item.
3. To exit the menu, touch the Exit ( ) or Return (
) tab.
1/1
Submenu items
•
•
Off: Disables the function.
On ( ): You can focus on a small portion of a large object at a
wide angle.
•
•
•
•
•
•
When recording in Tele Macro mode, the focus speed may be lowered.
Use a tripod (not supplied) to prevent camcorder shake in the Tele Macro mode.
Avoid shadows when recording in the Tele Macro mode.
As the distance to the subject decreases, focusing area narrows.
If you can not get proper focus, move the Zoom button or Zoom lever to adjust the focus.
The effective focal distance in the Tele Macro mode is between 1 to 50 cm. (0.4 to 19.7 inches).
61
advanced recording
Cont. Shot
The Continuous Shot function lets you capture up to eight photos in rapid succession to give
you more photo-taking opportunities when recording moving subjects.
PRECHECK!
Select the record mode by pressing the MODE button. page 24
Cont. Shot
1. Touch the Menu (
) tab “Cont. Shot.”
Off
On
2. Touch the desired submenu item.
1/1
3. To exit the menu, touch the Exit ( ) or Return (
) tab.
Submenu items
•
•
Off: The camcorder records only one photo image.
On (
): When you press the PHOTO button, the camcorder can take up to
8 photos in one second.
•
•
If an error occurs (Card full, etc.) during continuous shot, the recording stops and an error message appears.
When “Cont. Shot” is “On,” the camcorder fixes the photo resolution at 1920x1080.
Wind Cut
Using the Wind Cut function, you can reduce wind noise when recording sound using the
internal microphone.
PRECHECK!
Select the record mode by pressing the MODE button. page 24
Wind Cut
1. Touch the Menu (
) tab “Wind Cut.”
Off
On
2. Touch the desired submenu item.
1/1
3. To exit the menu, touch the Exit ( ) or Return (
) tab.
Submenu items
•
•
Off: Disables the function.
On ( ): Reduces wind noise when recording sound using the internal microphone.
Using the Wind Cut function also removes some low frequency sound with the wind noise.
62
Digital Zoom
The digital zoom enables higher zoom magnification than the optical zoom. Digital zoom can
electronically magnify an image created by the optical lens up to 1000 times.
PRECHECK!
Select the record mode by pressing the MODE button. page 24
Digital Zoom
Off
1. Touch the Menu (
) tab “Digital Zoom.”
On
2. Touch the desired submenu item.
1/1
3. To exit the menu, touch the Exit ( ) or Return (
) tab.
STBY 00:00:00
[307Min]
9999
Submenu items
•
•
Off : Disables Digital Zoom.
On : Enables higher digital zoom magnification.
The right side of the bar shows
the digital zooming zone. The
zooming zone appears when
you move the zoom lever.
When you use the digital zoom, the camcorder processes the image
digitally more than in the optical zoom mode. As a result, the image
resolution may deteriorate.
Self Timer
When you enable the self-timer, there is a time delay of 10 seconds before recording starts.
You can record videos or take photos of yourself.
PRECHECK!
Select the record mode by pressing the MODE button. page 24
1. Touch the Menu (
) tab “Self Timer.”
Self Timer
2. Touch the desired submenu item.
OFF
Off
10 Sec
3. To exit the menu, touch the Exit ( ) or Return (
) tab.
1/1
Submenu items
•
•
Off: Disables the Self Timer.
10 Sec ( ): There is a time delay of 10 seconds after you press the
Record Start/Stop or PHOTO button.
The camcorder automatically turns the Self Timer function off after it has been used once.
You must turn it on each time you want to use it.
63
advanced recording
Quick View
Using the Quick View function, you can view the most recently recorded video or photo images
immediately after you have recorded them.
PRECHECK!
Select the record mode by pressing the MODE button. page 24
1. Touch the Menu (
) tab “Quick View.”
Quick View
Off
On
2. Touch the desired submenu item.
3. To exit the menu, touch the Exit ( ) or Return (
) tab.
1/1
Submenu items
•
•
Off: Quick View ( ) icon does not appear on the screen after you finish the recording.
On: Quick View ( ) icon appears on the screen as soon as you finish the recording. Touch the
Quick View icon to view the most recent video or photo you have recorded. After the Quick View
is completed, your camcorder switches back to the standby mode.
Deleting files after Quick View
If you touch the delete (
during Quick View, the file you are
viewing is deleted.
) tab
00:00:05/00:00:50
100 0013
_
Quick View
•
•
The Quick View function is not available under the following conditions:
-
-
-
-
If the mode has been changed after the recording
If the USB cable is connected to the camcorder.
If the camcorder has been restarted after the recording
After playing Quick View
For photos recorded with “Cont. Shot,” only the last file in the sequence is displayed.
64
Guideline
Guideline displays straight line patterns on the LCD screen that can help you set the image
composition when recording images. The camcorder provides 3 types of guidelines.
PRECHECK!
Select the record mode by pressing the MODE button. page 24
1. Touch the Menu (
) tab “Guideline.”
Guideline
Off
2. Touch the desired guideline according to the subject.
•
The selected guideline appears on the screen.
3. To exit the menu, touch the Exit ( ) or Return (
) tab.
STBY 00:00:00
[307Min]
9999
Submenu items
•
•
Off: Disables the function.
: Placing the subject at the center cross point puts the subject in
the middle of the frame.
•
•
: Positioning subjects within the Safety Zone rectangle ensures
they will be recorded.
: For recording multiple subjects. Putting subjects at or near the
grid cross points creates a balanced composition.
•
•
Positioning a subject at the cross point of a guideline provides a balanced composition.
Guidelines are not recorded.
65
advanced playback
Play Option
You can select a specific video playback option.
PRECHECK!
HD
SD
Select the Play (
) tab on the LCD screen to select the Video play (
/
) mode. page 40
1. Touch the Menu (
) tab “Play Option.”
Play Option
Play All
2. Touch the desired submenu item.
Play One
3. To exit the menu, touch the Exit ( ) or Return (
) tab.
1/1
Repeat All
Repeat One
Submenu items
•
Play All ( ): Plays video clips in succession starting from a
video you select and ending at the last video you
recorded, then returns to the thumbnail index view.
•
•
•
Play One ( ): Plays the selected video once, and then returns
to the thumbnail view.
Repeat All ( ): Plays all the video clips repeatedly until you
touch the Return (
Repeat One ( ): Plays one selected video repeatedly until you
touch the Return ( ) tab.
) tab.
66
Highlight
The Highlight function plays a portion of each recorded video at random.
PRECHECK!
HD
SD
Select the Play (
) tab on the LCD screen to select the Video play (
/
) mode. page 40
1. Touch the Menu (
) tab. “Highlight.”
Highlight
Recent
2. Touch the desired submenu item.
All
3. To exit the menu, touch the Exit ( ) or Return ( ) tab.
1/1
Submenu items
•
Recent ( ): Plays a portion of all videos created within the last 24
hours.
•
All ( ): Plays a portion of all video files.
Highlight playback time to the duration of a video
Video Duration
Less than 5 sec. Full playback
5 to 30 sec. Plays 5 seconds at random.
Highlight playback time
30 sec. to 5 min. Plays 5 seconds of each 30 second section at random.
5 min. to 10 min. Plays 11 seconds of each 2 minute section at random.
Over 10 min.
Plays 15 seconds of each 3 minute section at random.
•
•
lf you run the Highlight function in the date thumbnail display, Highlight plays random portions of all
the files in the selected date set.
In the Highlight play mode, you can adjust the volume by touching the screen. You can also cancel
the playback.
67
advanced playback
Slide Show Option
You can set the play options for the slide show with the slide show setting menus.
PRECHECK!
Select the Play (
) tab on the LCD screen to select the photo ( ) mode. page 40
1. Touch the Menu (
) tab. “Slide Show Option.”
Slide Show Option
1 Sec
On
Interval
Music
fect
:
:
:
2. Touch the desired submenu item and touch the ( )/( ) tab to
set the value you want.
On
3. To exit the menu, touch the Exit ( ) or Return ( ) tab.
Submenu items
•
Interval: Continuously plays back photos at the interval you select.
You can choose 1 sec. or 3 sec.
•
Music: You can turn the internal background music on or off. This
camcorder has 7 default background melodies stored in the
boot-up flash memory. When music is On, starting a slide
show starts the play back of the 7 melodies in shuffle mode.
Effect: Continuously plays back photos using the fade in / out
effect to transition between images.
•
File Info
You can see the image information for all images.
PRECHECK!
Select the Play (
) tab on the LCD screen to select the Video play ( HD / SD ) or Photo play ( ) mode.
page 40
1. Touch the Menu (
) tab “File Info.”
File Info
100VIDEO
2. Select the file you want to view the file information for.
_
HDV 0017.MP4
•
The information of the selected file appears.
Date
: JAN.01.2010
: 00:00:05
Duration
Size
: 9.56MB
3. To exit the menu, touch the Return ( ) tab.
Resolution
: HD 1080 60i F
68
editing files
DELETING FILES
You can erase your recordings one by one or all at once.
PRECHECK!
•
•
Insert a memory card. page 28
Touch the Play ( ) tab on the LCD screen to select the play mode. page 40
1. Touch the HD ( HD ), SD ( SD ), or Photo ( ) tab.
Videos or photos appear as thumbnails.
Delete
•
Select Files
All Files
2. Touch the Menu (
) tab “Delete” touch the desired
submenu item.
1/1
•
•
If you touch “Select Files,” you will see image thumbnails. Go
to Step 3.
If you touch “All Files,” you will see the message that
corresponds to that option. Go to Step 4.
Delete
3. Touch the files you want to delete. After you have selected all the
files you want to delete, touch the ( ) tab. Go to Step 4.
See Submenu items below for additional details.
4. Touch “Yes.”
3/3
•
Remain:3.62GB
•
If you selected “All Files,” the camcorder deletes all the files in the storage media, except
for those that are protected.
•
If you selected “Select Files,” the camcorder deletes the files you selected.
Submenu items
•
Select Files: Deletes individual images.
Touch the images you want to delete. The indicator ( ) is displayed on the selected images. Touching the
thumbnail image toggles the image between being selected for deletion ( ) or not selected.
Touch the (
) tab.
•
All Files: Deletes all images.
•
•
Deleted images cannot be recovered.
Do not eject a memory card or power off the camcorder while deleting videos or photos recorded on the
storage media. Doing so may damage the storage media or data.
•
•
You can also operate this function in the full and single image display modes.
To protect important images from accidental erasure, activate the image protection function in advance.
page 70
•
•
•
You can not delete protected files. Cancel the protect function first. page 70
If the write protection tab on the memory card is set to lock, you cannot delete images.
The delete function does not work if the battery charge is insufficient. We recommend you use the AC
adapter to ensure the camera has continuous power when deleting.
69
editing files
PROTECTION FROM ACCIDENTAL ERASURE
You can protect important recordings from accidental erasure. The protected videos and
photos can not be deleted unless you format the memory card or cancel the protection.
PRECHECK!
•
•
Insert a memory card. page 28
Touch the Play ( ) tab on the LCD screen to select the play mode. page 40
1. Touch the HD ( HD ), SD ( SD ), or Photo ( ) tab.
Videos or photos appear as thumbnails.
Protect
•
Select Files
All On
2. Touch the Menu (
) tab “Protect” touch the desired
1/1
All Off
submenu item.
•
•
If you touch “Select Files,” you will see image thumbnails. Go
to Step 3.
If you touch “All Files,” you will see the message that
corresponds to that option. Go to Step 4.
Protect
3. Touch the files you want to protect. After you have selected all
the files you want to protect, touch the ( ) tab. Go to Step 4.
See Submenu items below for additional details.
3/3
•
4. Touch “Yes.”
•
•
•
If you selected “All On,” the ( ) indicator appears on all files.
If you selected “All Off,” the ( ) indicator disappears from all protected files.
If you selected “Select Files,” the indicator appears on the files you selected for
protection and disappears from the files you removed protection from.
Submenu items
•
Select Files: Protects individual images.
Touch the images to protect from erasure. The ( ) indicator appears on the selected images.
Touching the thumbnail image toggles the image between being selected ( ) or not selected.
Touch the (
) tab.
•
•
All On: Protects all images.
All Off: Turns off protection on all protected images all at once.
•
•
You can also operate this function in the full and single image display modes.
If the write protection tab on the memory card is set to lock, you cannot set this function.
page 29
70
DIVIDING A VIDEO
You can divide a video into two, and easily delete a section you no longer need. As this function
edits the original file, make sure to back up the original before dividing it.
PRECHECK!
•
•
Insert a memory card. page 28
Select the Play ( ) tab on the LCD screen to select the Video play (
HD
SD
/
) mode. page 40
1. Touch the Menu (
2. Touch the video you want to edit.
The selected video is displayed as paused.
) tab “Edit” “Divide.”
Edit
Divide
•
Combine
1/1
3. Search for the point of division by touching the playback
control tabs.
•
Playback control tabs:
/
/
/
/
/
4. Touch the pause (
) tab at the point of division, and then
) tab.
00:00:25/00:00:50
100_0013
touch the Cutting (
Divide
•
A message appears asking for your confirmation.
5. Touch “Yes.”
•
•
The video you selected is divided into two video clips.
The second clip of the divided video is displayed as the last
thumbnail.
•
After the division, you can partially delete an unnecessary section or combine it with other
videos.
Do not eject a memory card or power off the camcorder while editing a video recorded on the storage
media. Doing so may damage the storage media or data.
•
•
•
•
You can also operate this function in the full and single image display modes.
You can not divide files that are protected ( ). Cancel the protect function first. page 70
The divided video may drift before or after the division point by approximately 2 seconds.
The Divide function is not available under the following conditions:
-
-
-
-
If the total recorded time of the video is less than 6 seconds.
If you try to divide sections without leaving 3 seconds at the beginning and the end.
If the remaining memory space on your memory card is less than 15MB.
When the number of files on the card reaches 9999.
•
You can not divide photos.
71
editing files
COMBINING VIDEOS
You can combine two different videos. As this function edits the original files, make sure to back
up the original files before combining them.
PRECHECK!
•
•
Insert a memory card. page 28
Select the Play ( ) tab on the LCD screen to select the Video play (
HD
SD
/
) mode. page 40
1. Touch the Menu (
) tab “Edit” “Combine.”
Edit
Divide
2. Touch the video thumbnails of the videos you want to combine in
Combine
the order you want them combined.
1/1
•
The (
) indicator and the order number appear on the
selected videos. Touching the video thumbnail toggles a video
between being selected ( ) or not selected.
The ( ) indicator does not appear if the video files have
different resolutions.
•
Combine
1
3. Touch the (
) tab.
3/3
•
A message appears asking for your confirmation.
4. Touch “Yes.”
The camcorder combines the video files you selected in the
•
order you designated, and then stores the combined videos
as a single video file.
Do not eject a memory card or power off the camcorder while editing a video recorded on the memory
card. Doing so may damage the storage media or data.
•
•
•
You can not combine files that are protected ( ). Cancel the protect function first. page 70
The original videos are not preserved.
The Combine function is not available under the following conditions:
-
If the Videos are in different resolution formats. For example, videos recorded at “Video
Resolution: 1080/60i” and “Video Resolution: 720/60p” cannot be combined.
If the file size of the combined videos exceeds 1.8 GB.
If the remaining memory space on your memory card is less than 15MB.
If a video’s file format is not supported by the camcorder.
-
-
-
-
72
When the camcorder is playing a video file.
system setting
SETTING MENU ITEMS
•
•
Refer to page 45 for setting menus.
For item operation details, go to the page number listed in the table under Page.
Items
Card Info
File No.
Default value
Page
74
-
Series
Home
75
Time Zone
75
JAN/01/2010 12:00 AM
(Summer Time : Off)
Date/Time Set
76
Date Type
Time Type
JAN/01/2010
76
76
77
77
78
79
79
80
81
82
82
83
83
84
74
84
85
85
86
12 Hr
Date/Time Display
LCD Brightness
Auto LCD Off
Beep Sound
Shutter Sound
Auto Power Off
Quick On STBY
PC Software
USB Connect
HDMI TV Out
TV Connect Guide
TV Display
Off
18
On
On
On
5 Min
5 Min
On
Mass Storage
Auto
-
On
-
Format
Default Set
-
Language
English
On
On
Demo
Anynet+(HDMI-CEC)
•
•
Menu options and default values may be changed without prior notice.
The time type may change depending on the language you selected.
73
system setting
Card Info
This function shows you the storage information of the memory card, such as used memory
space, available memory space, etc.
PRECHECK!
Insert a memory card. page 28
1. Touch the Menu (
) Setting ( ) tab “Card Info.”
Card Info
•
Used memory space, available memory space, and
recordable time appear. Available space and recordable time
depend on the video resolution you’ve selected.
• Used: 40.5MB
• Free: 30.8GB
[HD]1080/60i
Super Fine
Fine
:
:
:
253Min
307Min
390Min
Normal
2. To exit the menu, touch the Return (
) tab.
Format
Use this function if you want to delete all files completely or to correct problems on the storage
media.
PRECHECK!
Insert a memory card. page 28
TV Connect Guide
1. Touch the Menu (
) Setting ( ) tab “Format.”
TV Display
Format
2. Touch “Yes” “Yes.”
5/6
•
The format is executed and the formatting message appears.
Default Set
•
Do not remove the storage media or perform any other operation (such as turning off the power)
during formatting. Also, be sure to use the provided AC power adapter to power the camcorder
when formatting. The memory card may be corrupted if the battery becomes exhausted during
formatting and the formatting process stops before the card is completely formatted.
If the storage media becomes corrupted, format it again.
•
•
Do not format the storage media on a PC or other device. Make sure to format the storage media
on this camcorder.
•
•
You can not format a memory card with the protection tab set to lock. page 29
If there is no storage media inserted, you can not select the Format function, and its name will be
dimmed on the menu.
•
Formatting completely deletes all files and options on a memory card, including protected files.
By deleting all files and options, formatting typically corrects problems, enabling stable read/write
speeds and operation.
74
File No.
File names (numbers) are assigned to recorded images according to the numbering option you
select.
1. Touch the Menu (
) Setting ( ) tab “File No..”
File No.
Series
Reset
2. Touch the desired submenu item.
3. To exit the menu, touch the Exit ( ) or Return (
) tab.
1/1
Submenu items
•
Series: Assigns file numbers in a continuous sequence even after you
replace or format the storage media or delete all files. Each file is given a
unique file number that allows convenient image management on a PC.
Reset: Resets the file number to 0001 after you format the memory card,
delete all files, or insert a new memory card.
•
When you set “File No.” to “Series,” the camcorder assigns each file a different number to avoid
duplicating file names. This is useful when you want to manage your files on a computer.
Time Zone
You can set the clock to the local time when using your camcorder in a different time zone.
Setting the local time
1. Touch the Menu (
) tab Setting ( ) tab “Time Zone”
Time Zone
“Visit.”
Home
Visit
2
Touch the left (
) or the right (
) tab to select the visited area.
1/1
3. Touch the ( ) tab when the time zone setting is complete.
•
The camcorder does not apply the time zone you set if you
finish the setting by touching the ( ) tab without touching
the ( ) tab.
Visit
London,Lisbon
Submenu items
[HOME 00:00] JAN/01/2010 12:00AM
•
Home: The camcorder displays the time according to your settings on the
Date/Time Set menu. Select Home when using the camcorder for the first
time or when returning the clock to your hometown date/time setting.
Visit ( ): When you visit a locale in a different time zone, the Visit
function allows you to use the local time without changing your
hometown time setting. The camcorder adjusts the clock in accordance
with the time difference between the two locations.
•
75
system setting
Date/Time Set
Date/Time Set
Month
Day
Year
JAN
Hr
01
2010
/
/
By setting the date and time, you can display the date and time of
Min
the recording during playback. page 26
12
:
00
AM
Date Type
You can set the display format for the date.
1. Touch the Menu (
) Setting ( ) tab “Date Type.”
Date Type
2. Touch the desired submenu item.
2010/01/01
JAN/01/2010
01/JAN/2010
01/01/2010
3. To exit the menu, touch the Exit ( ) or Return (
) tab.
1/1
Submenu items
•
•
•
•
2010/01/01: Displays the date in the year/month (two-digit)/day format.
JAN/01/2010: Displays the date in the month/day/year format.
01/JAN/2010: Displays the date in the day/month/year format.
01/01/2010: Displays the date in the day/month (two-digit)/year format.
This function depends on the “Date/Time Display” setting. page 77
Time Type
You can set the display format for the time.
1. Touch the Menu (
) Setting ( ) tab “Time Type.”
Time Type
2. Touch the desired display option.
3. To exit the menu, touch the Exit ( ) or Return (
12 Hr
24 Hr
) tab.
1/1
Submenu items
•
•
12Hr: Displays the time information in 12 hour units.
24Hr: Displays the time information in 24 hour units.
This function depends on the “Date/Time Display” setting. page 77
76
Date/Time Display
You can set whether or not the date and/or time are displayed on the LCD screen.
PRECHECK!
Before you use the “Date/Time Display” function, you must set the date and time. page 76
1. Touch the Menu (
) Setting ( ) tab “Date/Time Display.”
Date/Time Display
Off
2. Touch the desired submenu item.
Date
Time
3. To exit the menu, touch the Exit ( ) or Return (
) tab.
1/1
•
The date/time is displayed on the LCD screen according to
Date & Time
the selected option.
Submenu items
•
Off: Current date/time information is not displayed.
Date: Displays the current date.
Time: Displays the current time.
•
•
•
Date & Time: Displays the current date and time.
•
•
The date/time will read “JAN/01/2010 12:00 AM” in the following case:
When the internal rechargeable battery is depleted.
This function depends on the “Date Type” and “Time Type” setting. page 76
-
LCD Brightness
You can adjust the brightness of the LCD screen to compensate for ambient lighting conditions.
1. Touch the Menu (
) Setting ( ) tab “LCD Brightness.”
) or increase ( ) tab to adjust the
LCD Brightness
18
2. Touch the decrease (
setting values as you want.
You can set value for LCD brightness between 0 and 35.
•
3. To exit the menu, touch the Exit ( ) or Return ( ) tab.
•
•
•
If the surroundings are too bright, adjust the brightness of the LCD screen.
Adjusting the LCD screen does not affect the image you are recording.
A brighter LCD screen consumes more power.
77
system setting
Auto LCD Off
To reduce power consumption, the camcorder automatically dims the brightness of the LCD
screen if the camcorder is idle for a period of time.
1. Touch the Menu (
) Setting ( ) tab “Auto LCD Off.”
Auto LCD Off
Off
On
2. Touch the desired submenu item.
3. To exit the menu, touch the Exit ( ) or Return (
) tab.
1/1
Submenu items
•
•
Off: Disables the function.
On: When the camcorder is idle for more than 2 minutes in the STBY
mode, or for more than 5 minutes when recording a video, the
power saving mode starts by dimming the LCD screen.
STBY 00:00:00
[307Min]
9999
STBY 00:02:00
[307Min]
9999
After 2 minutes
<In the STBY mode>
<LCD screen is darkened>
00:00:00
[307Min]
00:05:00
[307Min]
After 5 minutes
<During recording>
<LCD screen is darkened>
•
•
When the “Auto LCD Off” function is enabled, you can press any button on the camcorder to
return LCD brightness to normal.
Auto LCD Off is disabled in the following cases:
-
-
If the AC power adaptor is connected.
While the Demo function is in operation.
78
Beep Sound
The Beep Sound function lets you control whether a beep sounds when you touch certain
buttons on the screen.
1. Touch the Menu (
) Setting ( ) tab “Beep Sound.”
Beep Sound
Off
On
2. Touch the desired submenu item.
3. To exit, touch the Exit ( ) or Return (
) tab until the menu
1/1
disappears.
Submenu items
•
•
Off: Disables the function.
On: You will hear a beep when pressing buttons or tabs such as the
Power ( ) button or Recording start/stop button.
The Beep Sound is canceled in the following cases:
-
-
During recording and playback.
When the camcorder has a cable connection (Audio/Video cable, HDMI cable, etc.).
Shutter Sound
The Shutter Sound function lets you turn the shutter sound that plays when you press the
PHOTO button on or off.
1. Touch the Menu (
) Setting ( ) tab “Shutter Sound.”
Shutter Sound
Off
On
2. Touch the desired submenu item.
3. To exit the menu, touch the Exit ( ) or Return (
) tab.
1/1
Submenu items
•
•
Off: Disables the function.
On: You will hear the shutter sound when you press the PHOTO
button.
The camcorder does not make the shutter sound:
-
-
If you press the PHOTO button during video recording.
When the camcorder has a cable connection (Audio/Video cable, HDMI cable, etc.).
79
system setting
Auto Power Off
You can set your camcorder to turn off automatically if it is idle for 5 minutes without an
operation. This function prevents unnecessary power consumption.
1. Touch the Menu (
) Setting ( ) tab “Auto Power Off.”
Auto Power Off
Off
2. Touch the desired submenu item.
5 Min
3. To exit the menu, touch the Exit ( ) or Return (
) tab.
1/1
Submenu items
•
•
Off: Disables the function.
5 Min: The camcorder turns off if idle for 5 minutes without an
operation.
•
•
Auto Power Off does not work in the following situations:
-
-
-
-
When the camcorder has a cable connection. (USB cable, AC power adaptor, etc.)
While the Quick On STBY function is in operation.
While the Demo function is in operation.
While you are recording, playing (except pause), or running a photo slide show.
To turn the camcorder on again, press the Power ( ) button.
80
Quick On STBY
When you are going to record frequently for an extended time, use the Quick On STBY function
to reduce energy consumption and battery drain. With the Quick On STBY function On and
the camcorder in standby mode, closing the LCD screen starts Quick On STBY. Once you are
ready to record again and you open the LCD screen, Quick On STBY triggers the camcorder to
come on quickly from the power saving mode.
1. Touch the Menu (
) Setting ( ) tab “Quick On STBY.”
Quick On STBY
Off
2. Touch the desired submenu item.
5 Min
10 Min
20 Min
3. To exit the menu, touch the Exit ( ) or Return (
) tab.
1/1
Submenu items
•
Off: In the standby mode, closing the LCD screen turns off the
camcorder.
•
5 Min: In the standby mode, closing the LCD screen starts the
Quick On STBY mode in a few seconds. The camcorder
stays in Quick On STBY mode for 5 minutes and then turns
off unless you open the LCD screen or push a button.
10 Min: In the standby mode, closing the LCD screen starts the
Quick On STBY mode in a few seconds. The camcorder
stays in Quick On STBY mode for 10 minutes and then
turns off unless you open the LCD screen or push a button.
20 Min: In the standby mode, closing the LCD screen starts the
Quick On STBY mode in a few seconds. The camcorder
stays in Quick On STBY mode for 20 minutes and then
turns off unless you open the LCD screen or push a button.
•
•
•
We recommend turning off the camcorder after use to reduce energy consumption.
However, as an alternative, you can use the Quick On STBY function under most shooting
conditions to reduce energy consumption effectively.
•
•
The mode indicator keeps blinking in the Quick On STBY mode.
The Quick On STBY mode is not available under the following conditions:
-
-
-
When the LCD screen is open.
When a video cable (HDMI, Audio/Video cable) or the USB cable is connected to the camcorder.
When you operate the buttons on the camcorder.
81
system setting
PC Software
If you set PC Software to On, you can use the PC software built into the camcorder (Intelli-
studio) by connecting your camcorder to your PC using the camcorder’s USB cable. You can
download the video and photo images stored on the camcorder to your PC’s hard disk and edit
the videos and photos using the internal PC software.
1. Touch the Menu (
) Setting ( ) tab “PC Software.”
PC Software
Off
On
2. Touch the desired submenu item.
3. To exit the menu, touch the Exit ( ) or Return (
) tab.
1/1
Submenu items
•
•
Off: Disables the PC Software function.
On: The internal editing software starts when you connect the
camcorder to a PC.
•
•
•
The PC Software function is not available under the following conditions:
If “USB Connect” is set to “PictBridge”
To enable the PC Software function, set “USB Connect” to “Mass Storage,” in the system setting
menu option. page 82
-
The PC Software is compatible with the Windows operating systems only.
USB Connect
You can transfer data to a PC or print photos directly by establishing the correct USB connection.
1. Touch the Menu (
) Setting ( ) tab “USB Connect.”
USB Connect
Mass Storage
PictBridge
2. Touch the desired submenu item.
3. To exit the menu, touch the Exit ( ) or Return (
) tab.
1/1
Submenu items
•
•
Mass Storage: Connect to a PC to transfer videos or photos. page 100
PictBridge: Connect to a PictBridge printer to print photos directly (when
using the PictBridge function). page 92
Before connecting a USB cable, check whether the current USB mode is appropriate for the function
you want to use.
82
HDMI TV Out
You can set the HDMI video output to match the TV you have connected the camcorder to.
PRECHECK!
Using the HDMI cable (not supplied), connect the camcorder to your TV. page 87
1. Touch the Menu (
) Setting ( ) tab “HDMI TV Out.”
HDMI TV Out
Auto
480p
2. Touch the desired submenu item.
3. To exit the menu, touch the Exit ( ) or Return (
) tab.
1/1
Submenu items
•
Auto: The video signals are output in the same format as the
recorded file. Use this setting only when connecting to an
HDTV.
•
480p: The recorded file is output in the 720x480p format. Use this
setting only when connecting to a standard, analog TV which
supports Standard Definition (SD) progressive scan through
its the HDMI jacks.
TV Connect Guide
You can view the TV Connect Guide before you connect the camcorder to your TV set.
1. Touch the Menu (
) tab Setting ( ) tab “TV Connect
TV Connect Guide
HDMI
Guide.”
Composite
2. Touch the desired submenu item.
1/1
•
The TV Connect Guide appears depending on the selected
submenu items.
•
Refer to the TV Connect Guide when you connect your
camcorder to a TV.
TV Connect Guide
Composite
3. To exit the menu, touch the Exit ( ) or Return (
) tab.
Camcorder
TV
Video
L
Audio
R
Submenu items
<To connect the
Audio/Video cable>
•
HDMI: Select HDMI when connecting the camcorder to a TV with
an HDMI cable.
•
Composite: Select Composite when connecting the camcorder to
a TV with a Video/Audio (composite) cable.
83
system setting
TV Display
You can enable or disable the On Screen Display (OSD) that appears on the TV screen when
you have connected your camcorder to a TV.
1. Touch the Menu (
) Setting ( ) tab “TV Display.”
TV Display
Off
On
2. Touch the desired submenu item.
3. To exit the menu, touch the Exit ( ) or Return (
) tab.
1/1
Submenu items
•
Off: The OSD (On Screen Display) menus are only shown on the
LCD screen.
•
On: The OSD menus are shown on the LCD screen and the TV
screen as well.
The thumbnail display and Demo screens are shown on the TV even if you set “TV Display” to “Off.”
Default Set
You can restore all menu settings to their factory default settings.
1. Touch the Menu (
) Setting ( ) tab “Default Set.”
A message appears asking for your confirmation.
•
TV Connect Guide
TV Display
Format
2. Touch "Yes" if you want all the settings returned to the default.
5/6
•
The Time Zone screen appears after all settings return to their
defaults.
Default Set
26
3. Set the date and time again. page
•
•
Do not turn off the power while using this function.
Initializing the camcorder settings to factory defaults does not affect recorded images.
84
Language
You can select a language in which to display the menu and
Language
messages. page 27
English
한국어
1/8
Français
Deutsch
Demo
Demo mode automatically shows you the major functions that are included with your camcorder
so that you may use them more easily.
1. Touch the Menu (
) Setting ( ) tab “Demo.”
Demo
Off
On
2. Touch the desired submenu item.
3. To exit the menu, touch the Exit ( ) or Return (
) tab.
1/1
Submenu items
•
•
Off: Disable the Demo function.
On: Enables the Demo function.
Using the Demo function
The Demo mode is canceled in the following cases:
-
-
If the LCD screen is touched.
If you press any button (Recording start/stop, Q.MENU, Display (
PHOTO, etc.). However, the camcorder enters the Demo mode automatically after 5 minutes in STBY
mode if it is idle for 5 minutes without an operation. If you don’t want the Demo function to start, set
“Demo” to “Off.”
), SMART AUTO, MODE,
The Demo function does not operate in the following case:
-
If you set “Auto Power Off” to “5 Min” and you are using the battery to power the camcorder, the
Auto Power Off function turns the camcorder off before Demo can run.
85
system setting
Anynet+ (HDMI-CEC)
This camcorder supports Anynet+. Anynet+ is an AV network system that lets you control all
connected Samsung AV devices with an Anynet+ supported Samsung TV remote control.
1. Touch the Menu (
) Setting ( ) tab “Anynet+ (HDMI-
Anynet+ (HDMI-CEC)
CEC).”
Off
On
2. Touch the desired submenu item.
1/1
3. To exit the menu, touch the Exit ( ) or Return (
) tab.
Submenu items
•
•
Off: Disables the function.
On: The Anynet+ function is enabled.
When the camcorder is connected to an Anynet+ supported TV,
you can operate some functions of the camcorder using the TV’
s remote control.
•
•
When you turn on the camcorder and it is connected by an HDMI cable to a TV that supports
Anynet+, the TV automatically turns on. If you do not want to use the Anynet+ function, set the
“Anynet+ (HDMI-CEC)” to “Off.”
For details on the Anynet+ (HDMI-CEC) function, refer to the user manual of Samsung’s Anynet+
supported TV.
86
connecting to a TV
CONNECTING TO A HIGH DEFINITION TV WITH HDMI
You can view High Definition (HD) quality videos recorded in HD resolution on an HDTV using
an HDMI connection. This camcorder supports HDMI output to deliver high-definition video
transfer.
PRECHECK!
•
•
•
Check if there is an HDMI input jack on your TV.
Use the AC power adaptor to power the camcorder when you attach it to a TV.
Select “HDMI TV Out.” page 83
HDTV
Camcorder
Signal flow
Mini HDMI Cable
Using a mini HDMI cable
1. Turn on the camcorder.
•
If you do not turn on the camcorder first, the camcorder may fail to recognize the
connected TV.
2. Connect the camcorder to the TV with a Mini HDMI cable.
3. Set the TV’s input or source selector to the HDMI input you’ve attached the camcorder to.
•
Refer to the TV’s instruction manual to see how to select the TV’s input or source.
4. Select the playback mode on your camcorder, and then start to play back videos or photos.
pages 41~43
87
connecting to a TV
Understanding the HDMI cable
HDMI (High Definition Multimedia Interface) is a compact audio/video interface for transmitting
uncompressed digital data.
What is Anynet+ function?
The Anynet+ function lets you control all devices that support the Anynet + function with the same
remote. You can use the Anynet + function on the camcorder if the camcorder is connected by an HDMI
cable to a TV that supports Anynet+. For more information, refer to the Anynet+ supported TV’s user
manual.
When “HDMI TV Out” is set to “Auto,” you can play an SD video file in HD format.
This camcorder comes with the “TV Connect Guide” menu function. If you try to connect the
camcorder to a TV and don’t have your user’s manual, you can use the “TV Connect Guide”
menu function to view connection instructions on the camcorder’s screen. page 83
You can use only a C to A type Mini HDMI cable with this camcorder.
The HDMI jack on the camcorder is for output only.
If you connect an Anynet+ supported TV to the camcorder with an HDMI cable, turning on the
camcorder may turn the TV’s power on. (an Anynet+ function) If you don’t want this to occur, set
“Anynet+ (HDMI-CEC)” to “Off.” page 86
Use only HDMI 1.3 cable when connecting to the HDMI jack of this camcorder. If you use another
type of HDMI cable, the screen display may not work.
88
CONNECTING TO A REGULAR TV
You can view images recorded with your camcorder on a regular TV that supports standard
definition. This camcorder supports the composite output for standard definition video transfer.
PRECHECK!
Use the AC power adaptor to power the camcorder when you connect it to a TV.
Regular TV
Camcorder
Signal flow
Audio/Video cable
Connecting an Audio/Video cable for the composite output
1. Connect the camcorder to a TV with an Audio/Video cable.
•
Turn on the camcorder, and then connect an Audio/Video cable. If you do not turn on
the camcorder first, the camcorder may fail to recognize the connected TV.
2. Set the TV’s input or source selector to the input you’ve attached the camcorder to.
Refer to the TV’s instruction manual to see how to select the TV input.
•
3. Select the playback mode on your camcorder, and then start to play back videos or photos.
pages 41~43
Make sure you’ve connected the camcorder to the correct input jacks. The TV screen may not display the right
video information if the camcorder is connected incorrectly.
When connecting to a TV using the Audio/Video cable, match the color of the cables to the color of the
corresponding jacks.
Video input may appear green depending on the TV. If this occurs, connect the yellow plug of the Audio/Video cable
to the green jack of the TV.
When the camcorder is connected to a TV with more than one type of cable, the camcorder outputs video signals
in the following order of priority:
-
HDMI Audio/Video (composite) output
This camcorder comes with the “TV Connect Guide” menu function. If you try to connect the camcorder to a
TV and don’t have your user’s manual, you can use the “TV Connect Guide” menu function to view connection
instructions on the camcorder’s screen. page 83
If your TV has one audio jack (mono input), connect the yellow plug of the Audio/Video cable to the video jack, the
white plug to the audio jack, and leave the red plug unconnected.
When you connect the camcorder to a TV using the Audio/Video cable, images recorded in high-definition image
quality (1080/60i or 720/60p) are played back in standard definition image quality.
89
connecting to a TV
VIEWING ON A TV SCREEN
Image appearance depends on the TV screen aspect ratio
Recording ratio
Appearance on Wide (16:9) TV Appearance on 4:3 TV
Images recorded in a 16:9 ratio:
•
•
•
Video images
Photo images
Photo capture images
Adjust the volume to a moderate level. If the volume is too high, the video may include noise.
If “TV Display” is set to “Off,” the TV screen does not display the camcorder’s OSD (On Screen
Display) menus. page 84
90
dubbing videos
DUBBING TO A VCR OR DVD/HDD RECORDER
Videos recorded in this camcorder can be dubbed to a VCR or DVD/HDD recorders.
PRECHECK!
•
Videos are dubbed to the other recording device via analog data transfer (composite connection). Use the
supplied Audio/Video cable.
•
Use the AC power adaptor to power the camcorder when you dub to a VCR or DVD/HDD recorder.
VCR or DVD/HDD
recorder
Camcorder
Signal flow
Audio/Video cable
1. Connect your camcorder to the recording device (VCR or DVD/HDD recorder) with the
Audio/Video cable.
•
•
Connect your camcorder to the input jacks of the recording device.
If your recording device has an input selector, set it to the correct input mode.
2. Insert the storage device (tape, disc, etc.) into the recording device.
3. Start the playback on your camcorder, and record it on the recording device.
•
Refer to the instruction manuals supplied with your recording device for details.
4. When dubbing is finished, stop the recording device and your camcorder.
Videos recorded on this camcorder can only be dubbed using the Audio/Video cable in SD (standard
definition) image quality, regardless of the recording resolution (HD/SD).
You cannot dub to a recorder with an HDMI cable.
To copy a video recorded in HD (high definition) image quality, use the internal software of your
camcorder, and copy the video to your computer. page 95
Because dubbing is performed via analog data transfer, the image quality may deteriorate.
To hide the screen indicators (such as the counter, etc.) on the screen of the connected monitor
device set “TV Display: Off.” page 84
To record the date/time, display it on the screen. page 77
91
printing photos
DIRECT PRINTING WITH A PICTBRIDGE PRINTER
You can print photos directly by connecting your camcorder to a PictBridge printer (sold
separately) using a USB cable.
PRECHECK!
•
•
Insert the memory card. page 28
Select the Play ( ) tab on the LCD screen to select the Photo play ( ) mode. page 40
1. Touch the Menu (
) Setting ( ) tab “USB Connect”
USB Connect
Mass Storage
PictBridge
“PictBridge.”
2. Use a USB cable to connect your camcorder to the printer.
1/1
3. Turn your printer on.
•
The photo thumbnails appear on the LCD screen.
14/17
4. Touch the photos you want to print, and then touch the
Print ( ) tab.
The corresponding message appears.
-
100 0014
01
•
5. Touch “Yes.”
Camcorder
To set the number of prints
Touch the decrease (
copies to print.
The number of copies is set.
)/increase (
) tab to set the number of
To cancel the print setting
Touch the Return ( ) tab on the LCD screen.
To stop printing after printing starts
Touch “Cancel” on the screen.
If the camcorder fails to recognize the printer, remove the
USB cable, and then turn off the printer. Set “USB Connect”
to “PictBridge,” and then connect the USB cable again.
Use the supplied USB cable.
Printer
(Compatible with PictBridge)
92
To set the date/time imprint for Pictbridge printers
1. In the printer mode, touch the Menu (
) tab.
14/17
-
100 0014
•
The print options appear on the screen.
01
2. Touch “Date/Time.”
3. Touch the desired submenu item.
4. To exit the menu, touch the Exit ( ) or Return (
) tab.
•
The printer prints the selected date and time on the photos.
Date/Time
1/1
Date/Time
Off
Date
1/1
Time
Date & Time
The date/time imprint option may not be supported by all printers. Check with your printer
manufacturer. You can not setup the “Date/Time” menu if the printer does not support this option.
PictBridge™ is a registered trademark of CIPA (Camera & Imaging Products Association), an image
transfer standard developed by Canon, Fuji, HP, Olympus, Seiko Epson, and Sony.
Use the AC power adaptor to power your camcorder during PictBridge direct printing. Turning the
camcorder off during printing might damage data on the storage media.
You can not print video images.
You can not print photos recorded on other devices.
Various printing options are available depending on the printer. Refer to the printer's user manual
for details.
93
using with a Windows computer
WHAT YOU CAN DO WITH A WINDOWS COMPUTER
You can perform the following functions by connecting your camcorder to your Windows computer with a
USB cable and using the Intelli-studio editing software built into your camcorder.
Main functions
Intelli-studio editing software’s main functions.
-
-
-
Playing back recorded videos or photos.
Editing recorded videos or photos.
Uploading the recorded videos and photos to YouTube, Flickr, Facebook, etc.
You can transfer or copy the files (videos and photos) saved on the storage media into your computer (the
mass storage function).
System requirements
The following requirements must be satisfied to use the internal editing software (Intelli-studio):
Items
OS
Requirement
Microsoft Windows XP SP2, Vista, or Windows 7
CPU
Intel® Core 2 Duo® 1.66 GHz or higher is recommended
AMD Athlon ™ X2 Dual-Core 2.2 GHz or higher is recommended
(Notebook: Intel Core2 Duo 2.2GHz or AMD Athlon X2 Dual-Core 2.6GHz or higher
is recommended)
RAM
1GB or higher is recommended
Video Card
NVIDIA GeForce 8500 or higher, ATI Radeon HD 2600 series or higher
Display
USB
1024 x 768, 16-bit color or higher (1280 x 1024, 32-bit color recommended)
USB 2.0
Direct X
DirectX 9.0c or higher
A Class 6 SDHC card or above.
Memory Card
*
System requirements mentioned above are recommendations. Even on a system that satisfies the
requirements, Intelli-studio may not operate optimally.
On a slower computer than recommended, video playback may skip frames or operate erratically.
If the version of DirectX on your computer is lower than 9.0c, install DirectX 9.0c or higher.
We recommend transferring the recorded videos to a PC before playing back or editing the video
data.
To run Intelli-studio, a laptop computer requires better and faster components than a desktop PC.
Intelli-studio is not Macintosh compatible.
94
USING THE Intelli-studio PROGRAM
Using the Intelli-studio program built into your camcorder, you can transfer video and photo files
to your PC using a USB cable and edit them on your PC screen. Intelli-studio offers the most
convenient way for you to manage your video and photo files.
Step 1. Connecting the USB cable
1. Set “USB Connect: Mass Storage” and “PC Software: On.”
PC Software
•
These are the default settings.
Off
On
2. Connect the camcorder to a PC with the USB cable.
1/1
•
•
A new file saving window appears along with the Intelli-studio
main window.
Depending on your version of Windows, the Windows
removable disk window may also appear.
3. Click “Yes” in the new file saving window. The uploading
procedure starts. Click “Yes” to confirm.
•
If you do not want to save any new files, select “No.”
95
using with a Windows computer
To disconnect the USB cable
To disconnect the USB cable after completing the file transfer, you must follow these steps:
1. Click the “Safely Remove Hardware” icon on the taskbar.
2. Select “USB Mass Storage Device,” and then click “Stop.”
3. If the “Stop a Hardware device” window appears, click “OK.”
4. Disconnect the USB cable from the camcorder and PC.
Use the provided USB cable. (Supplied by Samsung)
Make sure you insert the USB plug into the USB jack with the plug facing in the correct direction.
Use the AC power adaptor to power the camcorder when transferring files to your computer.
When the USB cable is connected, turning the camcorder on or off may cause the PC to
malfunction.
If you disconnect the USB cable from the PC or the camcorder while transferring files, the data
transmission will stop and the data may be damaged.
If you connect the camcorder to a PC via a USB HUB or simultaneously connect the camcorder
along with other USB devices, the camcorder may not work properly. If this occurs, remove all USB
devices from the PC, and then reconnect the camcorder.
Intelli-studio may not automatically run. If this occurs, access My Computer or Windows Explorer,
open the drive that corresponds to your camcorder, find Intelli-studio, and then run iStudio.exe.
96
Step 2. About the Intelli-studio main window
When the Intelli-studio starts up, video and photo thumbnails are displayed in the main window.
1
2
3
4
5
6
!
0
9
7
8
1. Menu items
2. Switches to Library of the computer and
connected camcorder.
9. Selects the connected device.
10. Shows Contents Manager and My
Computer directories.
3. Switches to Photo Edit mode.
4. Switches to Movie Edit mode.
5. Switches to Share mode.
Contents Manager: You can classify
and manage videos and photos on your
computer.
My Computer: You can view videos and
photos saved in selected directories of
your computer.
6.
:
Changes the size of
thumbnails.
: Displays all files (videos and photos).
: Displays video files only.
: Displays photo files only.
11. Shortcut icons
: Navigates files (previous and next).
: Prints selected photo(s).
: Displays voice files only.
7. Minimizes the connected device screen.
8. Displays videos and photos in various
ways.
:
Displays locations where you shot
selected photo(s) with GPS information.
: Registers to Contents Manager.
: Manages the registry of faces in the
selected photo folder.
Thumbnails: Displays video and photo
thumbnails.
Smart Album: Arranges multiple videos
and photos by various classifications.
Global Map: Displays the locations where
photos and videos were shot on a map.
Intelli-studio is a program commonly used in Samsung camcorders or digital cameras. Some functions
listed above may not work on the product you purchased.
97
using with a Windows computer
Step 3. Playing back videos or photos
You can play back the recordings conveniently using the Intelli-studio application.
1. Run the Intelli-studio program. page 95
2. Click the desired folder to display your recordings.
•
Video or photo thumbnails appear on the screen,
depending on the folder you selected.
3. Choose the video or photo that you want to play.
•
You can view the file information by moving the
mouse over the file.
•
If you click a video thumbnail once, the video
plays back inside the thumbnail frame, allowing
you to search for a desired scene with ease.
4. After you select the video or photo you want, double-click to play back.
•
Playback starts and the controls appear.
Intelli-studio supports the following file formats:
-
-
Video formats: MP4 (Video: H.264, Audio: AAC), WMV (WMV 7/8/9)
Photo formats: JPG, GIF, BMP, PNG, TIFF
Step 4. Editing videos or photos
With Intelli-studio, you can edit the videos or photos in
various ways with various functions. (Change Size, Fine-
Tuning, Image Effect, Insert Frame, etc.)
•
Before editing a video or photo in Intelli-studio,
make a backup copy of the video or photo file and
store it on your computer for safe-keeping using My
Computer or Windows Explorer.
98
Step 5. Sharing the videos/photos online
Share your contents with the world by uploading photos and videos directly to a web site with
one click.
1. Select the videos or photos you want to share.
2. Click “Share” on the Intelli-studio browser.
•
The selected file appears in the sharing window.
3. Click the web site you would like to upload files to.
•
You can choose “YouTube,” “Fickr,” “Facebook,”
or another web site you want to use for your
uploading management.
4. Click “Upload” to start uploading.
•
A pop up window appears asking for your ID and
password.
5. Enter your ID and the password to access.
•
Access to the web site contents can be limited
depending on your web access environment.
For more information about using Intelli-studio, open
the Help Guide by clicking “Help.”
The Intelli-studio application will run faster if you install
it on your Windows computer. To install, click “Tool”
“Install Intelli-studio on PC” on the Intelli-studio
screen.
Flickr is an image hosting website, web services suite, and online community platform.
In addition to being a popular website for users to share personal photographs,
theservice is widely used by bloggers as a photo repository.
http://www.flickr.com/
Facebook is a global social networking website that is operated and privately owned
by Facebook, Inc. Users can add friends and send messages, and update their
personal profiles to notify friends about themselves. Additionally, users can join
networks organized by city, workplace, school, and region.
http://www.facebook.com/
YouTube is a video sharing website. Users can upload, view, and share personalized
video clips. The San Bruno-based service uses Adobe Flash technology to display
a wide variety of users-generated contents including video clips, TV clips and music
videos, as well as amateur contents such as video blogging and short original videos.
http://www.youtube.com/
99
using with a Windows computer
USING AS A REMOVABLE STORAGE DEVICE
You can copy video or photo files recorded by the camcorder to a Windows computer by
connecting the camcorder to the computer using a USB cable.
Viewing the contents of storage media
1. Set “USB Connect” to “Mass Storage.” page 82
2. Set “PC Software” to “Off.” page 82
3. Insert a memory card. page 28
4. Connect the camcorder to the PC with the USB cable.
page 95
•
•
The “Removable Disk” or “Samsung” window appears
on the PC’s screen after a moment.
Select “Open folders to view files using Windows
Explorer”, and then click “OK.”
5. The folders in the storage media appear.
Different file types are stored in different folders.
•
6. Select the desired folder or files to copy, then drag and
drop them into the destination folder.
•
The folder or files are copied from the storage media
to the PC.
If the “Removable Disk” window does not appear,
confirm the connection (page 95) or perform steps
1 and 4 again. If the removable disk does not appear
automatically, open the removable disk folder in My
Computer.
If the connected camcorder’s disk drive does not open
or the context menu that appears when right clicking
your mouse (open or browse) appears broken, your
computer may be infected by Autorun virus.
Please update your anti-virus software to its latest
version and scan your disk drives.
Photos
Videos
Setting data
100
Structure of folders and files on the storage media
•
•
The folder and file structure for storage media are below.
File naming follows DCF (Design rule for Camera File System) rules.
Video file (H.264)
➀
HD-quality videos have an HDV_####.MP4 name format.
SD-quality videos have a SDV_####.MP4 name format.
The file number used in the file name automatically increases
when you create a new video file.
A new folder is created when the file number has reached
999~1,000.
The folder names are given in the following order:
100VIDEO, 101VIDEO, etc. The maximum number of folders
is 999.
The camcorder can create a maximum of 9,999 files in a
storage media.
Photo file
➁
As with video files, the file number used in the file name
automatically increases when you create a new photo file.
Photos have a SAM_####.JPG name format.
The folder names are given in the following order:
100PHOTO, 101PHOTO, etc.
File format
Video files
•
•
Video files are compressed in H.264 format. The file extension is “.MP4.”
Refer to page 50 for the video resolution.
Photo files
•
Photo images are compressed in JPEG (Joint Photographic Experts Group) format. The file
extension is “.JPG.”
•
Refer to page 51 for the photo resolution.
Do not modify the name of a video file recorded by the camcorder. For proper playback, the
camcorder requires that files have their original folder and file names.
101
troubleshooting
Before contacting a Samsung authorized service center, perform the following simple checks.
They may save you the time and expense of an unnecessary call.
WARNING INDICATORS AND MESSAGES
Problems may occur because of the following reasons. Check the information and take
corrective action.
Battery
Message
Icon
Informs that...
Action
Replace with a charged battery or
connect the AC power adaptor.
Low Battery
-
The battery is almost discharged.
Check whether the battery is
authentic. If not, change to an
authentic Samsung battery.
We recommend you use only
genuine Samsung batteries in this
camcorder.
Check authenticity of
the battery.
The battery can not pass
authenticity check.
-
Storage media
Message
Icon
Informs that ...
Action
There is no memory card inserted
in the memory card slot.
Insert card
Insert a memory card.
Delete unnecessary files from the
memory card.
Back-up files to a PC or another
storage media, and then delete
unneeded files.
Replace the memory card with
another card that has enough free
space.
There is not enough space to
record on the memory card.
Card Full
The write protection tab on an SD
or SDHC card has been set to
lock.
Card Locked
Card Error
Release the write protection tab.
The memory card has a problem
and the camcorder can not
recognize it.
Replace the memory card with
another card.
102
Message
Icon
Informs that ...
Action
The memory card is not
formatted in this camcorder.
Format the memory card using
this camcorder.
Not Formatted
Files cannot be played as the
memory card format is not
supported by the camcorder.
Format the card using the
camcorder or replace the card
with a card formatted correctly.
The memory card may have
been formatted by another
device and may still have existing
images on it.
Not Supported
Format
The memory card is not
supported in this camcorder.
Replace the memory card with a
recommended card.
Not Supported Card
Record video at a lower resolution
and quality.
Replace memory card with a
faster card.
Low Speed Card.
Please record at a
lower resolution.
The memory card is not fast
enough to record at this
resolution.
-
Recording
Message
Icon
Informs that ...
Action
Turn the camcorder's power off
and on for data recovery.
If a file is not recovered, use the
camcorder to format the storage
media after backing up important
files to a PC or another storage
media.
A problem has occurred while
the camcorder was writing data
to storage media.
Write Error
-
You can not operate some
functions manually when Smart
Auto is activated.
Release the Smart
Auto
-
-
Release the Smart Auto function.
Wait until data recovery is finished.
Never turn off the power or
eject the memory card during
recording.
Recovering Data…
Don’t power off and
keep card inside.
The file was not created
normally.
103
troubleshooting
Recording
Message
Icon Informs that ...
Action
Delete unnecessary files from the
storage media.
Back up files to your PC or another
storage media and delete unneeded
files.
The number of video
files is full.
Cannot record video.
The number of video files that can
be stored is 9,999.
-
Change to another card which has
enough free space.
Set “File No.” to “Reset.”
Format the storage media.
Delete unnecessary files on the
storage media.
Back up files to your PC or another
storage media and delete unneeded
files.
Change to another card which has
enough free space.
The number of photo
files is full.
Cannot take a photo.
The number of photo files that
can be stored is 9,999.
-
Set “File No.” to “Reset.”
Format the storage media.
Set “File No.” to “Reset” and
format the storage media.
Remember to back up important
files before formatting.
Folder and file number have
reached the maximum number
and you can not record.
File number is full.
Cannot record video.
-
-
Set “File No.” to “Reset” and
format the storage media.
Remember to back up important
files before formatting.
Folder and file number have
reached the maximum number
and you can not record.
File number is full.
Cannot take a photo.
Playback
Message
Icon Informs that ...
A problem has occurred while the
Action
Use the camcorder to format the
storage media after backing up
important files to a PC or another
storage device.
Read Error
-
camcorder was reading data from
the storage media.
Use the camcorder to format the
storage media after backing up
important files to a PC or another
storage device.
Corrupted file
-
This file can not be read.
104
Editing videos
Message
Icon
Informs that ...
Action
The files you want to combine
have different resolutions.
Cannot select
different resolution.
You can not combine files that
have different resolutions.
-
You cannot edit due to
insufficient space on memory
card.
Edit after deleting unnecessary
files.
Not enough free
space in Card.
-
-
Combine two files first, and then
combine the resulting file with an
additional file. Note that you can
not combine files if the total size
of the combined files exceeds
1.8GB.
Select 2 files for
combine.
Only two files can be combined.
Perform a divide or partial
delete function first to delete
unnecessary parts of the files,
and then perform the combine
function.
The files whose total size is
likely to exceed 1.8GB cannot
be combined.
Total file size is over
than 1.8GB.
-
105
troubleshooting
USB
Message
Icon
Informs that...
Action
Check the USB cable.
Try the connection procedure
again.
Switch “USB connect” function to
“PictBridge.”
Fail Printer
Connecting
Change 'USB
Connect'
A problem occurred when
connecting the camcorder via
USB to a printer.
-
Check the USB cable.
Try the connection procedure
again.
Switch “USB connect” function to
“Mass Storage.”
Fail USB
A problem occurred when
connecting the camcorder via
USB to a PC.
Connecting
Change 'USB
Connect'
-
Check the ink cartridge.
Put a new ink cartridge into the
printer.
There is a problem with an ink
cartridge.
Ink Error
-
-
There is a problem with the
paper.
Check the paper in the printer. If
there is no paper, insert paper.
Paper Error
Your camcorder does not support
this file format.
Try another file recorded on your
camcorder.
There is a problem with the
file.
File Error
-
Turn the printer’s power off and on.
Contact the printer manufacturer’s
service center.
There is a problem with the
printer.
Printer Error
Print Error
-
-
Do not remove the camcorder’s
power source or eject the memory
card during printing.
A problem occurred during
printing.
106
SYMPTOMS AND SOLUTIONS
If these instructions do not solve your problem, contact your nearest Samsung authorized
service center.
Power
Symptom
Explanation/Solution
The battery may not be installed in your camcorder. Insert the
battery into the camcorder.
The inserted battery may be discharged.
Charge the battery or replace it with a charged one.
If you use the AC power adaptor, make sure it is properly
connected to a wall outlet.
The camcorder does not turn on.
Is “Auto Power Off” set to “5 Min”? If no button is pressed for
about 5 minutes, the camcorder is automatically turned off (“Auto
Power Off”). To disable this option, change the setting of “Auto
Power Off” to “Off.” page 80
The power turns off automatically.
The battery is almost exhausted. Charge the battery or replace it
with a charged one.
Remove the battery or unplug the AC power adaptor, and connect
the power supply to the camcorder again before turning it on.
Power cannot be turned off.
The temperature is too low.
The battery is not fully charged. Charge the battery again.
The battery has reached the end of its lifespan and cannot be
recharged. Use another battery.
The battery discharges quickly.
Display
Symptom
Explanation/Solution
The TV screen or LCD display has
distorted images or has stripes at
the top/bottom or on the left/right.
This can occur when recording or viewing a 16:9 ratio image on
a 4:3 ratio TV, or vice versa. For more details, see the display
specification. page 90
Unknown image appears on the
LCD screen.
The camcorder is in Demo mode. If you do not want to see Demo
images, change “Demo” to “Off.” page 85
Unknown indicator appears on the
screen.
A warning indicator or message appears on the screen.
pages 102~106
An afterimage remains on the LCD
screen.
This occurs if you disconnect the AC power adaptor or remove the
battery before turning the power off.
The image on the LCD screen looks
dark.
Ambient light is too bright. Adjust the brightness and angle of the
LCD.
107
troubleshooting
Recording
Symptom
Explanation/Solution
Press the MODE button to set the record mode. page 24
There is not enough free space to record on the storage media.
Check if memory card is not inserted or write-protect tab is set to lock.
Pressing the Recording start/stop
button does not start recording.
The estimated recording time may vary depending on content and
features used.
When you record an object that moves quickly, the actual recording
time may be shortened.
The actual recording time is less than the
estimated recording time.
There is no more free space for recording on the storage media.
Back up important files on your PC and format the storage media or
delete unnecessary files.
If you make recordings or delete files frequently, the performance of the
storage media deteriorates. If this occurs, format the storage media again.
If you use a memory card with a low write speed, the camcorder
automatically stops recording videos and displays a message on the
LCD screen.
The recording stops automatically.
When recording a subject illuminated by
bright light, a vertical line appears.
This is not a malfunction.
This is not a malfunction.
When the screen is exposed to direct
sunlight during recording, the screen
becomes red or black for an instant.
During recording, the date/time does not
display.
“Date/Time Display” is set to “Off.” Set the “Date/Time Display”
to On. page 77
Set your camcorder to the record mode. page 24
Release the lock on the write-protection tab of the memory card if any.
The storage media is full. Use a new memory card or format the
storage media. page 74 Or remove unnecessary images. page 69
You cannot record a photo image.
Set “Shutter Sound” to “On.”
You don’t hear the shutter sound when
you record a photo image.
During dual recording (video and photo), the Shutter Sound is off.
When the Mini HDMI cable or Audio/Video cable is connected to the
camcorder, the Shutter Sound is not available.
Set “Beep Sound” to “On.”
Beep sound is temporally off while recording videos.
When the Mini HDMI cable or Audio/Video cable is connected to the
camcorder, the Beep Sound is not available.
You don’t hear the beep sound.
There is a time difference between the
point where you press the Recording
start/stop button and the point where
the recorded video starts/stops.
On your camcorder, there may be a slight time delay between the point
where you press the Recording start/stop button and the actual point
where the recorded video starts/stops. This is not an error.
This occurs when recording images under a fluorescent lamp,
sodium lamp, or mercury lamp. This is not a malfunction.
108
Horizontal stripes appear on the images.
Storage Media
Symptom
Explanation/Solution
Insert a memory card into your camcorder properly. page 28
If you use a memory card formatted on a computer, format it again
directly on your camcorder. page 74
Memory card functions do not
operate.
Release the lock on the write-protect tab of the memory card
(SDHC/SD memory card), if any. page 29
You cannot delete a protected image. Release protection of the
image using the Protect function. page 70
Image cannot be deleted.
Release the lock on the write-protect tab of the memory card
(SDHC/SD memory card), if any. page 29
The memory card is not supported on your camcorder or the card
has some problems.
You cannot format the memory
card.
The file may be corrupted.
The data file name is not indicated
correctly.
The file format is not supported by your camcorder.
The file name is displayed correctly only if the directory structure
complies with the international standard.
Adjusting the image during recording
Symptom
Explanation/Solution
Set “Focus” to “Auto.” page 57
The recording conditions are not suitable for auto focus. Adjust the
focus manually. page 57
Focus does not adjust
automatically.
The lens is dusty on the surface. Clean the lens and check the
focus.
Recording is being made in a dark location.
Use a light to brighten the area.
This may occur when you make a recording under a fluorescent
sodium, or mercury lamp. Cancel “ SCENE” to avoid or minimize
this phenomenon. page 49
The image appears too bright,
flickers, or changes color.
The white balance is incorrect. Set the proper “White Balance.”
page 52
Image’s color balance is not natural.
This is called the focal plane phenomenon. This is not a
A subject passing quickly through
the frame appears distorted
malfunction. Because of the way the image device (CMOS sensor)
reads out video signals, a subject passing through a frame rapidly
may appear to bend, depending on the recording conditions.
109
troubleshooting
Playback on your camcorder
Symptom
Explanation/Solution
Image files recorded using another device may not play on your
camcorder.
Check memory card compatibility. page 29
Playback (play/pause) function does
not work.
Photo images stored on a storage
media are not displayed in the
actual size.
Photo images recorded on other devices may not appear in their
actual size. This is not an error.
Playback is interrupted
unexpectedly.
Check if the AC power adaptor or battery back is properly
connected and secure.
Playback on other devices (TV, etc.)
Symptom
Explanation/Solution
You cannot view the image on or
hear the sound from the connected
device.
Make sure that the connection cable is connected to the proper
jack.
The image appears distorted on a
TV.
This phenomenon is caused by connecting to a TV with 4:3 aspect
ratio.
You cannot view the image on
or hear the sound from a TV
connected using the HDMI cable.
The camcorder can not output Images from the HDMI jack if the
material is copyright protected.
Connecting/Dubbing with other devices (Recorder, PC, Printer, etc.)
Symptom
Explanation/Solution
You cannot dub correctly using the
HDMI cable.
You cannot dub images using the HDMI cable.
The Audio/Video cable is not connected properly. Make sure that
the Audio/Video cable is connected to the proper jack, i.e. to
the input jack of the device used for dubbing images from your
camcorder. page 91
You cannot dub correctly using the
Audio/Video cable.
Your PictBridge printer cannot print
photos from your camcorder.
Your printer may not print images edited on a computer or
recorded using other devices. This is not an error.
110
Connecting to a computer
Symptom
Explanation/Solution
Disconnect the USB cable from the computer and camcorder,
restart the computer, and then connect the USB cable again
correctly.
Your computer does not recognize
your camcorder.
You need a video codec to play the file recorded on your
camcorder. Install the software provided with your camcorder.
page 99
Make sure you insert the connector in the correct direction, and
connect the USB cable to the USB jack on your camcorder firmly.
Disconnect the cable from the computer and camcorder, restart
the computer, and then connect the cable again properly.
To play back an HD video file, you need a computer with better
specifications.
Cannot play a video file properly on
a PC.
Use a computer with the recommended specifications. page 94
Intelli-studio does not function
properly.
Exit the Intelli-studio application, and restart the Windows
computer.
Set “PC Software” to “On” in the Settings menu or install Intelli-
studio on the computer. pages 82, 99
Intelli-studio does not start.
Video playback or sound may stop temporarily depending on your
computer. The video or sound copied to your computer is not
affected.
If your camcorder is connected to a computer that does not
support Hi-speed USB (USB2.0), the image or sound may not play
correctly. Images, video, and sound copied from the camcorder to
your computer are not affected.
Your computer is not playing
videos, images, or sound located
on your camcorder properly.
Check the system requirements to play a video.
Shut down all other applications currently running on the computer.
If you play a video on your camcorder when it is connected to
a computer, the video may not play smoothly on the computer,
depending on the transfer speed. Please copy the file to your PC,
and then play it back.
The playback screen is paused or
distorted.
111
troubleshooting
Overall operations
Symptom
Explanation/Solution
Has the camcorder been left unused for a long period of time?
The backup internal rechargeable battery may be discharged.
page 26
The date and time are incorrect.
Menu items that cannot be used at the same time
Symptom
Cannot use
Because of the following settings
Menu items are grayed out
“Photo Resolution”
“Cont. Shot”
You cannot select grayed menu items in the current recording/playback mode.
There are some functions you cannot activate simultaneously.
The list shown above shows examples of unworkable combinations of functions and menu items.
Menu and quick menu cannot be used in Smart Auto mode.
The following functions cannot be used during video recording:
“Video Resolution,” “Video Quality,” “Photo Resolution,” “Photo Sharpness,” “Fader,” “Cont.Shot,”
“Digital Zoom,” “Self Timer.”
The following functions are automatically set to Off or Auto mode in the Smart Auto mode:
“ SCENE,” “Shutter,” “Digital Effect,” “Tele Macro,” etc.
In the Smart Auto mode, your camcorder automatically chooses the appropriate camcorder settings
based on a detected type of scene. Most settings are automatically adjusted in Smart Auto mode. To set
or adjust functions on your own, release the Smart Auto mode first.
112
maintenance & additional information
MAINTENANCE
The suggestions below will help you fulfill any warranty obligations and allow you to enjoy this product for many years.
Cautions when storing
For safekeeping of the camcorder, turn off the camcorder.
-
Remove the battery and AC power adaptor.
-
Remove the memory card.
Cleaning the camcorder
Before cleaning, turn off the camcorder and remove the battery and AC power adaptor.
To clean the exterior
-
-
Wipe gently with a soft dry cloth. Do not apply excessive force when cleaning. Gently rub the surface.
Do not use benzene or thinner to clean the camcorder. The exterior coating could peel off or the case could deteriorate.
To clean the LCD screen
Wipe very gently with a soft dry cloth. Be careful not to damage the screen.
To clean the lens
Use a blower brush to remove dust, and then wipe the lens gently with a soft cloth.
If necessary, wipe gently with lens paper or tissue.
-
Mold may form if the lens is left dirty.
-
If the lens looks dim, turn off the camcorder and leave it off for about 1 hour.
LCD screen
To prolong its service life, do not rub the LCD screen with a coarse cloth.
Be aware of the following LCD screen phenomena. They are not malfunctions.
-
-
-
When you use the camcorder, the surface around the LCD screen may heat up.
If you leave the power on for a long time, the surface around the LCD screen becomes hot.
When using the camcorder in cold conditions, an afterimage may appear on the LCD screen.
An LCD screen is manufactured using advanced technology which creates screens with pixel failure rates of less than 0.01%.
However, a black or bright spot (red, blue, white) may appear in the center of the LCD screen and up to two spots may appear
outside the center. These spots, which are normally incurred during the manufacturing process, do not affect the recorded images.
When there is dew condensation, put the camcorder aside for a while before using
What is dew condensation?
Dew condensation happens when a camcorder is moved to a location where there is a significant temperature difference
from the previous location. The dew condenses on the external or internal parts of the camcorder, and on the reflection
lens. If there is dew on or in your camcorder, it may cause the camcorder to malfunction or damage the camcorder when
you turn the power on.
Exactly when does dew condensation occur?
When you move the camera to a location with a higher temperature than the previous location, or when you move it to a
hot area suddenly. Examples:
-
-
You record outside in cold weather during the winter and then move the camera in indoors.
You record outside in hot weather after being indoors or inside a car where the A/C was running.
What can I do?
Turn the power off, detach the battery, and leave the camcorder in a dry area for 1~2 hours before using it.
-
Use the camcorder only after dew condensation has completely disappeared.
Be sure to use the recommended accessories supplied with the camcorder. For service, contact your nearest
Samsung authorized service center.
113
maintenance & additional information
USING YOUR CAMCORDER ABROAD
•
•
Each country or region has its own electric and color systems.
Before using your camcorder abroad, check the following items.
Power sources
The AC adaptor provided lets you power, recharge, and use your camcorder in any country/
region that has AC power in the 100 V to 240 V, 50/60 Hz range. You may need a commercially
available AC plug adaptor depending on the design of local wall outlets.
On TV color systems
Your camcorder is an NTSC based camcorder. If you want to view your recordings on a TV or
copy them to an external device, it must be an NTSC based TV or external device and have
the appropriate Audio/Video jacks. Otherwise, you may need to use a separate video format
transcoder (For example, an NTSC to PAL format converter).
The format transcoder is not provided by Samsung.
NTSC-compatible countries/regions
Bahamas, Canada, Central America, Japan, Korea, Mexico, Philippines, Taiwan, United
States of America, etc.
PAL-compatible countries/regions
Australia, Austria, Belgium, Bulgaria, China, CIS, Czech Republic, Denmark, Egypt, Finland,
France, Germany, Greece, Great Britain, Holland, Hong Kong, Hungary, India, Iran, Iraq,
Kuwait, Libya, Malaysia, Mauritius, Norway, Romania, Saudi Arabia, Singapore, Slovak
Republic, Spain, Sweden, Switzerland, Syria, Thailand, Tunisia, etc.
You can make recordings with your camcorder and view pictures on the LCD screen anywhere
in the world.
114
specifications
Model name
HMX-T10WN / HMX-T10BN / HMX-T10ON
Video signal
NTSC
Picture compression format H.264 (MPEG-4.AVC)
Audio compression format AAC (Advanced Audio Coding)
Image device
Lens
1/4”, 5.1M Pixel CMOS
F1.8 ~ F2.5, 10x optical zoom,
100x digital zoom
2.75mm ~ 27.5mm
Ø 34
System
Focal length
Filter diameter
Size/dot number
LCD screen method
2.7” Wide Touch LCD / 230k
TFT LCD
LCD screen
Connectors
Composite output
HDMI output
Audio output
USB output
1Vp-p (75 Ω terminated)
C type connector
-7.5 dBs (600 Ω terminated)
mini USB-B type (USB2.0 High Speed)
Power source
Power source type
DC 5 V, Lithium Ion battery pack 3.7 V
Lithium Ion battery pack, Power supply
(100 V ~ 240 V) 50/60 Hz
Power consumption
(Recording)
Operating temperature
Storage temperature
Storage media
External dimensions
(WxHxD)
2.5W (LCD on)
0 ˚C ~ 40 ˚C (32 ˚F~104 ˚F)
-20 ˚C ~ 60 ˚C (-4 ˚F ~ 140 ˚F)
Memory card (SD/SDHC) (Not supplied)
Approx. 38.6mm (1.52 inches) x 54.4mm
(2.14 inches) x 118mm (4.65 inches)
Approx. 195.3g (0.43 lb, 6.89 oz)
(Except for Lithium Ion battery)
General
Weight
Internal MIC
Omni-directional stereo microphone
The technical specifications and design may be changed without notice.
115
warranty
SAMSUNG
LIMITED WARRANTY
SAMSUNG Electronics America Inc. (SEA), warrants that this product is free from defective
material and workmanship.
SEA further warrants that if product fails to operate properly within the specified warranty period
and the failure is due to improper workmanship or defective material, SEA will repair or replace
the product at it’s option.
All warranty repairs must be performed by a SEA authorized service center. The name and
address of the location nearest you can be obtained by calling toll free: 1-800 SAMSUNG
(1-800-726-7864).
Labor
90 days carry-in
Parts
1 year
On carry-in models, transportation to and from the service center is the customer’s
responsibility.
The original dated sales receipt must be retained by the customer and is the only acceptable
proof of purchase.
It must be presented to the authorized service center.
EXCLUSIONS (WHAT IS NOT COVERED)
This warranty does not cover damage due to accident, fire, flood and/or other acts of
God; misuse, incorrect line voltage, improper installation, improper or unauthorized repairs,
commercial use, or damage that occurs in shipping.
Exterior and interior finish, lamps, and glass are not covered under this warranty.
Customer adjustments which are explained in the instruction manual are not covered under the
terms of this warranty.
This warranty will automatically be voided for any unit found with a missing or altered serial
number. This warranty is valid only on products purchased in the United States and Puerto
Rico.
Some States do not allow the exclusions or limitations of incidental or consequential damages,
or allow limitations on how long an implied warranty lasts, so the above limitations or exclusions
may not apply to you.
This warranty gives you specific legal rights, and you may also have other rights which vary from
State to State.
COUNTRY
CALL
OR VISIT US ONLINE AT
WRITE
Samsung Electronics America, Inc.
85 Challenger Road Ridgefield Park,
NJ 07660-2112
1-800-SAMSUNG
(726-7864)
IN THE US
www.samsung.com
RoHS compliant
Our product complies with “The
Restriction Of the use of certain
Hazardous Substances in electrical and electronic
equipment”, and we do not use the 6 hazardous materials-
Cadmium(Cd), Lead (Pb), Mercury (Hg), Hexavalent
Chromium (Cr +6), Poly Brominated Biphenyls (PBBs),
Poly Brominated Diphenyl Ethers(PBDEs)- in our products.
|
Waring TAILGATER TG15 User Manual
Vizio Car Satellite TV System E4011 A2 User Manual
Turbo Air TCB 2SD User Manual
Soundstream Technologies REF2.370 User Manual
Sony XVM F65 User Manual
Sony TCM 21DV User Manual
Sony DCR DVD310E User Manual
Sony Cyber shot DSCW190R User Manual
Samsung VP M110 User Manual
Samsung Car Video System 1660C User Manual