Samsung Car Video System P2350G User Manual

SyncMaster P1950W,P2050,P2250,P2350,P2050G,P2250G,P2350G  
LCD Monitor  
User Manual  
The appearance and the color may differ depending on the  
model.  
Table Of Contents  
Correct Disposal of This Product  
1 Major Safety Precautions  
1-1 Before You Start  
Icons used in this manual  
ICON  
NAME  
MEANING  
Caution  
Indicates cases where the function may not work or the setting may be canceled.  
Note  
Indicates a hint or tip to operate a function.  
Using this Manual  
Make yourself fully aware of the safety precautions before using this product.  
If a problem occurs, refer to the 'Troubleshooting' section.  
Copyright Notice  
The contents of this manual are subject to change without prior notice for performance improvement.  
Copyright © 2009 Samsung Electronics Co., Ltd. All Rights Reserved.  
The copyright of this manual is reserved by Samsung Electronics, Co., Ltd.  
The contents of this manual may not be partially or in whole reproduced, distributed or used in any form without the written  
permission of Samsung Electronics, Co., Ltd.  
The SAMSUNG logo and SyncMaster are the registered trademarks of Samsung Electronics, Co., Ltd.  
Microsoft, Windows and Windows NT are the registered trademarks of Microsoft Corporation.  
VESA, DPM and DDC are the registered trademarks of the Video Electronics Standard Association.  
The ENERGY STAR logo is the registered trademark of the U.S. Environmental Protection Agency.  
All other trademarks mentioned herein belong to their respective companies.  
As a partner of ENERGY STAR, Samsung Electronics, Co., Ltd. admits that this product satisfies the ENERGY STAR  
specifications for energy saving.  
Major Safety Precautions  
1-1  
   
1-2 Custody and Maintenance  
External Surface and Screen Maintenance  
Clean the product with a soft dry cloth.  
Do not clean the product with an inflammable substance such  
as benzene or thinner or with a wet cloth. This may result in a  
problem with the product.  
Do not scratch the screen with your fingernails or a sharp  
object.  
This may result in scratches or damage to the product.  
Do not clean the product directly by spraying water onto the  
product.  
If water enters the product, it may result in fire, electric shock or  
a problem with the product.  
A white stain may be generated on the surface of the high-  
glossy model due to the inherent characteristics of the material,  
if a supersonic humidifier is used.  
The appearance and the color may differ depending on the  
model.  
About persistent images  
Displaying a still image for a long time may create a persistent image or stain on the screen. If you do not use the product for  
a long time, set the power-saving mode or screen saver.  
Due to technological constraints of the LCD Panel manufacturer, the images generated by this product may appear either  
brighter or darker than normal by appr. 1ppm (parts per million) pixel.  
The number of sub-pixels of an LCD panel by size: The number of Sub-Pixels = Max. Horizontal Resolution x Max. Vertical  
Resolution x 3  
Example) If the maximum resolution is 1680 x 1050, the number of sub-pixels is 1680 x 1050 x 3 = 5,292,000.  
1-2  
Major Safety Precautions  
 
1-3 Safety Precautions  
Icons used for safety precautions  
ICON  
NAME  
MEANING  
Failing to follow the precautions marked with this sign, may result in a serious injury or  
even a fatality.  
Warning  
Failing to follow the precautions marked with this sign, may result in a personal injury or  
property damage.  
Caution  
Meaning of Signs  
Do not perform.  
Must be followed.  
The power plug must be unplugged from the  
wall outlet.  
Do not disassemble.  
Do not touch.  
Must be grounded to prevent electric shock.  
Power Related  
The following images are for your reference and may differ depending on models and countries.  
Warning  
Avoid using a damaged power cord or plug or a  
loose power outlet.  
Avoid connecting multiple electric appliances to  
a single wall outlet.  
Otherwise, it may result in electric shock or  
fire.  
Otherwise, it may result in fire due to  
overheating of the wall outlet.  
Avoid plugging in or unplugging the power  
supply with wet hands.  
Plug the power plug in firmly.  
Otherwise, it may result in fire.  
Otherwise, it may result in electric shock.  
Make sure to connect the power cord to a  
grounded wall outlet (for insulation class 1  
equipment only).  
Avoid bending or twisting the power cord  
excessively and avoid placing heavy objects on  
the cord.  
Otherwise, it may result in electric shock or  
injury.  
Otherwise, it may result in electric shock or  
fire due to a damaged power cord.  
Keep the power cord and the product away  
from a heater.  
If the pins of the power plug or the wall outlet  
are covered in dust, clean it using a dry cloth.  
Otherwise, it may result in electric shock or  
fire.  
Otherwise, it may result in fire.  
Major Safety Precautions  
1-3  
 
Caution  
Avoid unplugging the power plug while the  
product is operating.  
Make sure to use only the power cord supplied  
by our company. In addition, do not use the  
power cord of another electric appliance.  
Otherwise, it may damage the product due  
to electric shock.  
Otherwise, it may result in electric shock or  
fire.  
When unplugging the power plug from the wall  
outlet, make sure to hold it by the plug and not  
by the cord.  
Connect the power plug to a wall outlet that can  
be easily reached.  
When a problem occurs with the product,  
you must unplug the power plug to cut the  
power off completely. You cannot cut the  
power off completely using only the power  
button on the product.  
Otherwise, it may result in electric shock or  
fire.  
Installation Related  
Warning  
Avoid placing burning candles, mosquito-  
Ask an installation engineer or relevant  
repellent or cigarettes on the product and  
installing the product near a heater.  
company to install the product onto the wall.  
Otherwise, it may result in injury.  
Otherwise, it may result in fire.  
Make sure to use the specified wall mount.  
Avoid installing the product in a badly-ventilated  
location such as inside a bookshelf or closet.  
Keep a distance of at least 10 cm from the wall  
when installing the product for ventilation.  
Otherwise, it may result in fire due to  
internal over-heating.  
Otherwise, it may result in fire due to  
internal over-heating.  
Keep the plastic bags used to pack the product  
away from children.  
Avoid installing the product in a location that is  
unstable or exposed to excessive vibrations  
such as on an unstable or slanted shelf.  
If children place the plastic bags over their  
heads, they may suffocate.  
The product may fall and this may result in  
damage to the product or injury.  
If you use the product in a location exposed  
to excessive vibrations, it may result in a  
problem with the product or fire.  
Avoid installing the product in a location  
exposed to dust, moisture (sauna), oil, smoke  
or water (rain drops) and installing it within a  
vehicle.  
Avoid installing the product in a location  
exposed to direct sunlight and installing the  
product near a heat source such as a fire or  
heater.  
This may result in electric shock or fire.  
This may shorten the product life cycle or  
cause fire.  
Avoid installing the product at an easily  
reachable height where children may reach it.  
If a child touches the product, the product  
may fall and this may result in injury.  
Since the front part is heavier, install the  
product on a flat and stable surface.  
1-3  
Major Safety Precautions  
Caution  
Do not let the product drop while moving it.  
Do not place the product face down on the  
floor.  
This may result in a problem with the  
product or injury.  
This may damage the panel of the product.  
When installing the product on a console or  
shelf, make sure that the front of the product  
does not protrude out of the console or shelf.  
When putting the product down, handle it  
gently.  
Otherwise, it may result in a problem with  
the product or injury.  
Otherwise, this may cause the product to  
fall off and result in a malfunction or injury.  
Make sure to use a cabinet or shelf suitable  
to the size of the product.  
If the product is installed in a location where the  
operating conditions vary considerably, a  
serious quality problem may occur due to the  
surrounding environment. In this case, install  
the product only after consulting one of our  
service engineers about the matter.  
Places exposed to microscopic dust,  
chemicals, too high or low temperature,  
high humidity, such as airports or stations  
where the product is continuously used for  
a long time and so on.  
Cleaning Related  
Since using a surfactant, which contains a large amount of alcohol, solvent or other strong chemicals, may result  
in the discoloration or cracking of the product exterior or the panel surface coming off, be sure to use the recom-  
mended cleansing agent only.  
You can purchase the recommended cleansing agent from a service center.  
Before cleaning the product, unplug the power  
cord.  
When cleaning the product, do not spray water  
directly over the product parts.  
Otherwise, it may result in electric shock or  
fire.  
Make sure that water does not enter the  
product.  
Otherwise, it may result in fire, electric  
shock or a problem with the product.  
Major Safety Precautions  
1-3  
Caution  
Avoid spraying cleansing agent directly onto  
the product.  
When cleaning the product, disconnect the  
power cord and clean the product with a soft  
dry cloth.  
This may result in discoloration or cracking  
of the exterior of the product or the panel  
coming off.  
Avoid using chemicals such as wax,  
benzene, alcohol, thinner, mosquito-  
repellent, fragrance, lubrication or cleansing  
agent when cleaning the product.  
This may result in the exterior being  
deformed or the print being removed.  
Use a soft, damp cloth with a "monitor-  
exclusive cleansing agent" and wipe the  
product with it.  
Since the exterior of the product is easily  
scratched, be sure to use a proper cleansing  
cloth. Use the cleansing cloth with a small  
amount of water. However, if the cloth is  
contaminated by alien substances, it may result  
in scratches to the exterior; therefore shake off  
any alien substances from the cloth before  
using it.  
If no monitor-exclusive cleansing agent is  
available, dilute a cleansing agent with  
water at a ratio of 1:10 before cleaning the  
product.  
Usage Related  
Warning  
Since a high voltage runs through the product,  
never disassemble, repair or modify the product  
yourself.  
When cleaning the product, do not spray water  
directly over the product parts.  
Make sure that water does not enter the  
product.  
Otherwise, it may result in fire or electric  
shock.  
Otherwise, it may result in fire, electric  
shock or a problem with the product.  
If the product needs to be fixed, contact  
a service center.  
If the product generates a strange noise, a  
burning smell, or smoke, unplug the power  
plug immediately and contact a service cen-  
ter.  
Avoid letting children to hang or climb onto the  
product.  
Otherwise, it may result in the product  
falling and this may result in injury or death.  
Otherwise, it may result in electric shock or  
fire.  
If you drop the product or the case is dam-  
aged, turn the power off and unplug the  
power cord. Contact a service center.  
Avoid placing objects such as toys and cookies  
on top of the product.  
If a child hangs over the product to grab an  
object, the object or the product may fall  
and this may result in injury or even death.  
Otherwise, it may result in fire or electric  
shock.  
When thunder or lighting occurs, unplug the  
power cord and under no circumstance touch  
the antenna cable as this is dangerous.  
Avoid dropping an object over the product or  
cause impact to the product.  
Otherwise, it may result in electric shock or  
fire.  
Otherwise, it may result in electric shock or  
fire.  
1-3  
Major Safety Precautions  
Avoid moving the product by pulling the power  
cord or antenna cable.  
When a gas leak occurs, do not touch the  
product or the power plug and ventilate  
immediately.  
Otherwise, it may result in electric shock,  
fire or a problem with the product due to  
damage to the cable.  
A spark may result in an explosion or fire.  
During a thunder or lighting storm, do not  
touch the power cord or antenna cable.  
Avoid lifting up or move the product by holding  
only the power cord or signal cable.  
Avoid using or placing inflammable spray or  
objects near the product.  
Otherwise, it may result in electric shock,  
fire or a problem with the product due to  
damage to the cable.  
This may result in an explosion or fire.  
Take care not to block the vent by a table cloth  
or curtain.  
Avoid inserting metal objects such as a  
chopsticks, coins or hairpins, or inflammable  
objects into the product (the vents, ports, etc).  
Otherwise, it may result in fire due to  
internal overheating.  
If water or an alien substance enters the  
product, turn the power off, unplug the  
power cord and contact a service center.  
Otherwise, it may result in a problem with  
the product, electric shock or fire.  
Avoid placing a liquid container such as a vase,  
flowerpot, beverage, cosmetics or drugs, or a  
metal object over the product.  
If water or an alien substance enters the  
product, turn the power off, unplug the  
power cord and contact a service  
center.  
Otherwise, it may result in a problem with  
the product, electric shock or fire.  
Caution  
Displaying a still image for a long time may  
create a persistent image or stain on the  
screen.  
When not using the product for a long time  
such as leaving your home, unplug the power  
cord from the wall outlet.  
If you do not use the product for a long time,  
use the power-saving mode or set the  
screensaver to the moving picture mode.  
Otherwise, it may cause dust accumulation  
and result in fire caused by overheating or  
short circuit or result in an electric shock.  
Set the appropriate resolution and frequency  
for the product.  
Avoid turning the product upside down or move  
the product holding only the stand.  
Otherwise, it may result in eye strain.  
This may cause the product to fall resulting  
in damage to the product or injury.  
Watching the product from too close a distance  
continuously may damage your eyesight.  
Avoid using a humidifier or cooker near the  
product.  
Otherwise, it may result in electric shock or  
fire.  
It is important to give your eyes some rest (5  
minutes every hour) when viewing the product  
screen for long periods of time.  
Since the display panel is hot after using it for a  
long time, do not touch the product.  
This will alleviate any eye strain.  
Major Safety Precautions  
1-3  
Keep small accessories away from the children.  
Take care when adjusting the angle of the  
product or the height of the stand.  
If your hand or finger is caught, you may be  
injured.  
If the product is tilted excessively, the  
product may fall and this may result in  
injury.  
Avoid placing a heavy object over the product.  
Otherwise, it may result in a problem with  
the product or injury.  
Maintaining the Correct Posture when Using this Product  
Maintain the correct posture when using this product.  
Straighten your back.  
Keep a distance of 45~50 cm from your eyes to the screen. Look down at the screen and  
face the screen forwards.  
Maintain the correct posture when using this product.  
Adjust the angle of the product so that light is not reflected onto the screen.  
Keep your elbow at a right angle and keep your arm level with the back of your hand.  
Keep your elbow at a right angle.  
Place your heels flat on the ground while keeping your knees at an angle of 90 degrees or  
higher and maintain the position of your arm so that your arm is below your heart.  
1-3  
Major Safety Precautions  
2 Installing the Product  
2-1 Package Contents  
Unpack the product and check if all of the following contents have been included.  
Store the packaging box in case you need to move the Product at a later stage.  
Monitor  
CONTENTS  
Installation Manual  
Product Warranty  
User Manual  
D-Sub Cable  
Power Cord  
Stand  
Cleaning Cloth  
Cable Arrangement Link  
Stand Connector  
OPTIONAL PARTS  
DVI Cable  
The cleaning cloth is supplied with black high-glossy models only.  
Installing the Product  
2-1  
   
2-2 Installing the Stand  
Before assembling the product, place the product down on a flat and stable surface so that the screen is facing downwards.  
Insert the Stand Connector into the Stand in the direction shown by the figure.  
Check if the Stand Connector is firmly connected.  
Turn the connecting screw at the bottom of the stand fully so that it is completely fixed.  
Place a soft cloth over the table to protect the product and place the product onto the  
cloth so that the front of the product is facing downwards.  
2-2  
Installing the Product  
 
Hold the main body of the product with your hand as shown by the figure.  
Push the assembled stand into the main body in the direction of the arrow as shown in  
the figure.  
- Caution  
Do not lift the product holding only the stand  
Installing the Product  
2-2  
2-3 Removing the Stand  
Before removing the stand, place the product down on a flat and stable surface so that the screen faces downwards.  
Place a soft cloth over the table to protect the product and place the product onto the  
cloth so that the front of the product faces downwards.  
Hold the main body of the product with your hand as shown by the figure.  
Pull the stand in the direction of the arrow as shown in the figure to separate it.  
Turn the connecting screw at the bottom of the stand to separate it.  
Take the Stand Connector out of the Stand by pulling it in the direction of the arrow as  
shown in the figure.  
2-3  
Installing the Product  
 
2-4 Installing the Stand for the Wall Mount  
This product provides a stand mount of 75 mm x 75 mm that complies with the VESA specifications.  
A. Stand Mount  
B. Stand (Optional)  
1. Turn the product off and unplug the power cord from the wall outlet.  
2. Place a soft cloth or cushion on a flat surface to protect the panel and place the product down on the cloth so that the front of  
the product faces downwards.  
3. Separate the stand.  
4. Align the groove of the part of the product that is to be connected to the stand with the groove in the stand (desk-top stand,  
wall mount stand or another stand) and firmly fix the stand by fastening the screw.  
If you use a screw that is longer than the standard specifications, the inside of the product may be damaged.  
For wall mounts that are not compatible with the standard VESA specifications, the length of the screw may differ  
depending on the corresponding specifications.  
Do not use screws that are incompatible with the standard VESA specifications and do not assemble them using  
excessive force.  
This may result in damage to the product or injury due to the product falling.  
The company shall not be held liable for any damage or injury.  
The company shall not be held liable for any damage to the product or injury caused by using a stand that is not  
compatible with the specified specifications or due to an installation not performed by an authorized installation  
engineer.  
When installing the product using a wall mount, purchase a wall mount that provides at least 10 cm of space from the  
wall.  
The company shall not be held liable for any problems caused by using a stand that is not compatible with the specified  
specifications.  
Use the wall mount according to the international specifications.  
Installing the Product  
2-4  
 
2-5 Connecting with a PC  
The connecting part may differ depending on the product model.  
1. Connect the product to a PC depending on the video output supported by the PC.  
When the graphics card provides D-Sub (analog) output  
Connect the [RGB IN] port of the product to the [D-Sub] port of the PC with the D-Sub cable.  
When the graphics card provides DVI (digital) output  
Connect the [DVI IN] port of the product to the DVI port of the PC with the DVI cable.  
2. Connect one end of the power cord to the [POWER] port of the product and connect the other end of the power cord to the  
220V or 110V wall outlet.  
(The input voltage is switched automatically.)  
When the product is connected to a PC, you can turn the product on and use it.  
When both the DVI (<Digital>) and D-Sub (<Analog>) cables are connected, you can select the input signal <Analog/  
2-5  
Installing the Product  
 
Digital> by pressing the  
button.  
Installing the Product  
2-5  
2-6 Kensington Lock  
Kensington Lock  
A Kensington Lock is an anti-theft device that enables users to lock the product so that they can safely use it in public locations.  
Since the shape and usage of the locking device may differ depending on the model and the manufacturer, for more information,  
refer to the User Manual supplied with the locking device. You have to purchase an additional locking device.  
Locking the product  
1. Insert the locking part of the locking device into the hole of the Kensington lock of the product and turn it in the locking  
direction.  
2. Connect the Kensington lock cable.  
3. Tie the Kensington lock cable to a desk or heavy object.  
You can purchase the locking device from an electronics store, an online shop, or our service center.  
2-6  
Installing the Product  
 
3 Using the product  
3-1 Setting the Optimal Resolution  
If you turn the power on after purchasing the product, a message regarding the optimal resolution setting appears on the screen.  
Select a language and the optimal resolution.  
/: You can select a language with these buttons.  
MENU : If you press this button, the message disappears.  
The message appears up to 3 times if the resolution has not been set to the optimal resolution.  
To set the resolution to the optimal resolution  
When the PC is turned off, connect the product and the PC and turn the power on.  
Right-click over the Desktop and select 'Properties' from the pop-up menu.  
In the 'Settings' tab, set the resolution to the optimal resolution.  
Using the product  
3-1  
   
3-2 Standard Signal Mode Table  
The LCD monitor has one optimal resolution for the best visual quality depending on the screen size due to the inherent  
characteristics of the panel, unlike for a CDT monitor.  
Therefore, the visual quality will be degraded if the optimal resolution is not set for the panel size. It is recommended setting  
the resolution to the optimal resolution of the product.  
If the signal from the PC is one of the following standard signal modes, the screen is set automatically. However, if the signal from  
the PC is not one of the following signal modes, a blank screen may be displayed or only the Power LED may be turned on.  
Therefore, configure it as follows referring to the User Manual of the graphics card.  
P1950W  
HORIZONTAL  
FREQUENCY (KHZ)  
VERTICAL  
FREQUENCY (HZ)  
SYNC POLARITY (H/  
V)  
DISPLAY MODE  
PIXEL CLOCK (MHZ)  
IBM, 640 x 480  
VESA, 800 x 600  
VESA, 800 x 600  
VESA, 1024 x 768  
VESA, 1280 x 800  
VESA, 1440 x 900  
31.469  
35.156  
37.879  
48.363  
49.702  
55.935  
59.940  
56.250  
60.317  
60.004  
59.810  
59.887  
25.175  
36.000  
40.000  
65.000  
83.500  
106.500  
-/-  
+/+  
+/+  
-/-  
-/+  
-/+  
P2050 / P2050G  
HORIZONTAL  
FREQUENCY (KHZ)  
VERTICAL  
FREQUENCY (HZ)  
SYNC POLARITY (H/  
V)  
DISPLAY MODE  
PIXEL CLOCK (MHZ)  
IBM, 640 x 480  
VESA, 800 x 600  
VESA, 800 x 600  
VESA, 1024 x 768  
VESA, 1280 x 800  
VESA, 1280 X 1024  
VESA, 1440 x 900  
VESA, 1600 x 900  
31.469  
35.156  
37.879  
48.363  
49.702  
63.981  
55.935  
60.000  
59.940  
56.250  
60.317  
60.004  
59.810  
60.020  
59.887  
60.000  
25.175  
36.000  
40.000  
65.000  
83.500  
108.000  
106.500  
108.000  
-/-  
+/+  
+/+  
-/-  
-/+  
+/+  
-/+  
+/+  
P2250 / P2250G / P2350 / P2350G  
3-2  
Using the product  
 
HORIZONTAL  
FREQUENCY (KHZ)  
VERTICAL  
FREQUENCY (HZ)  
SYNC POLARITY (H/  
V)  
DISPLAY MODE  
PIXEL CLOCK (MHZ)  
IBM, 640 x 480  
VESA, 800 x 600  
VESA, 800 x 600  
VESA, 1024 x 768  
VESA, 1280 x 800  
VESA, 1280 X 960  
VESA, 1280 X 1024  
VESA, 1440 x 900  
VESA, 1600 x 1200  
VESA, 1680 x 1050  
VESA, 1920 x 1080  
31.469  
35.156  
37.879  
48.363  
49.702  
60.000  
63.981  
55.935  
75.000  
65.290  
66.587  
59.940  
56.250  
60.317  
60.004  
59.810  
60.000  
60.020  
59.887  
60.000  
59.954  
59.934  
25.175  
36.000  
-/-  
+/+  
+/+  
-/-  
40.000  
65.000  
83.500  
-/+  
+/+  
+/+  
-/+  
+/+  
-/+  
+/-  
108.000  
108.000  
106.500  
162.000  
146.250  
138.500  
Horizontal Frequency  
The time taken to scan one line from the left-most position to the right-most position on the screen is called the horizontal cycle  
and the reciprocal of the horizontal cycle is called the horizontal frequency. The horizontal frequency is represented in kHz.  
Vertical Frequency  
A panel must display the same picture on the screen tens of times every second so that humans can see the picture. This  
frequency is called the vertical frequency. The vertical frequency is represented in Hz.  
Using the product  
3-2  
3-3 Installing the Device Driver  
If you install the device driver, you can set up the appropriate resolution and frequency for the product. The device driver is  
included on the CD-ROM supplied with the product. If the supplied drive file is corrupted, please visit a service center or  
1. Insert the driver installation CD-ROM into the CD-ROM drive.  
2. Click on "Windows Driver".  
3. Select the model of your product from the model list.  
4. Complete the remaining installation steps according to the instructions displayed on the screen.  
5. Check if the appropriate resolution and screen refresh rate are displayed in the Control Panel settings. For more information,  
refer to the document about the Windows operating system.  
3-3  
Using the product  
 
3-4 Product Operating Buttons  
Product Operating Buttons  
Touch one of the operating buttons lightly.  
The LED buttons appear.  
ICON  
DESCRIPTION  
MENU  
Press this button to view the On Screen Display (OSD).  
This button is also used to exit the OSD or to return to a higher-level OSD menu  
* OSD Adjustment Lock  
This function locks the OSD in order to maintain the current settings or to prevent the settings  
from being changed by another person  
On: If you press and hold the MENU button down for 5 seconds, the OSD Adjustment Lock  
function is activated.  
Off: If you press and hold the MENU button down for 5 seconds again, the OSD Adjustment  
Lock function is disabled.  
Even if the OSD Adjustment Lock function is activated, users can adjust the brightness  
and contrast and can set up the adjustment function assigned to the [ ].  
/▼  
Use these buttons to navigate the menu or to adjust a value in the OSD.  
Users can set the Customized Key to one of the following functions. If the user presses the  
Customized Key[ ] after setting it, the configured function will be performed  
<MagicBright> - <MagicColor> - <Color Effect> - <Image Size>  
You can set the function of the Customized Key by selecting "SETUP&RESET ->  
Customized Key" in the OSD.  
Use this button to control the brightness of the screen.  
Use this button to select a function.  
If you press the [  
] button when there is no OSD, the input signal (analog/digital) is  
] button or the product is  
switched. When the input signal is switched by pressing [  
turned on, a message displaying the selected input signal appears at the top left of the  
screen.)  
To select digital mode, you have to connect the product and the PC with the DVI cable.  
Using the product  
3-4  
 
ICON  
DESCRIPTION  
AUTO  
Press [AUTO] button to adjust the screen settings automatically  
This function is only available in analog mode.  
If the resolution settings are changed in the Display Properties, the AUTO adjustment func-  
tion is performed.  
Press this button to turn the product on or off  
The buttons on the right of the product are touch-type buttons.  
Touch the buttons lightly with your finger.  
Power LED  
This LED is turned on when the product works normally.  
For more information on the power-saving function, refer to the power saving function  
in More Information. When not using the product for a long time, unplugging the power  
cord is recommended to minimize power consumption.  
3-4  
Using the product  
3-5 Using the Screen Adjustment Menu (OSD: On Screen Display)  
The Screen Adjustment Menu (OSD: On Screen Display) Structure  
TOP MENUS  
SUB MENUS  
Brightness  
Fine  
Contrast  
Response Time  
Red  
Sharpness  
MagicBright  
Blue  
Coarse  
PICTURE  
MagicColor  
Color Effect  
H-Position  
Green  
Color Tone  
Menu V-Position  
COLOR  
Gamma  
V-Position  
Image Size  
Menu H-Position  
SIZE & POSI-  
TION  
Reset  
Menu Transpar-  
ency  
Language  
LED On/Off  
LED Brightness  
Display Time  
SETUP&RESET  
Off Timer On/Off  
Customized Key  
Off Timer Setting  
Auto Source  
PC/AV Mode  
INFORMA-  
TION  
PICTURE  
MENU  
DESCRIPTION  
Brightness  
Controls the screen brightness.  
This menu is unavailable when <MagicBright> is set to <Dynamic Contrast> mode.  
Contrast  
Controls the contrast of the pictures displayed on the screen  
This menu is unavailable when <MagicBright> is set to <Dynamic Contrast> mode.  
This menu is unavailable when <MagicColor> is set to <Full> mode or <Intelligent> mode.  
Sharpness  
Controls the clarity of details of pictures displayed on the screen  
This menu is unavailable when <MagicBright> is set to <Dynamic Contrast> mode.  
This menu is unavailable when <MagicColor> is set to <Full> mode or <Intelligent> mode.  
Using the product  
3-5  
 
MENU  
MagicBright  
DESCRIPTION  
Provides preset picture settings optimized for various user environments such as editing a document,  
surfing the Internet, playing games, watching sports or movies and so on.  
<Custom>  
If the preset picture modes are not sufficient, users can configure the <brightness> and  
<Contrast> directly using this mode.  
<Text>  
This mode provides the picture setting appropriate for editing a document.  
<Internet>  
This mode provides the picture setting appropriate for surfing the Internet (text + picture).  
<Game>  
This mode provides the picture setting appropriate for playing games that include lots of graphics  
and that require a fast screen refresh rate.  
<Sport>  
This mode provides the picture setting appropriate for watching sports games that include lots of  
movement.  
<Movie>  
This mode provides brightness and sharpness settings similar to those of a TV for the best  
entertainment environment (movie, DVD, etc.).  
<Dynamic Contrast>  
Controls the picture contrast automatically so that bright and dark pictures are balanced overall.  
Coarse  
Removes vertical noise lines (line pattern) from the screen.  
The location of the screen may be changed after the adjustment. In this case, move the screen so  
that the screen is displayed at the center of the display panel using the <H-Position> menu.  
This function is only available in analog mode.  
Fine  
Removes horizontal noise lines (line pattern) from the screen.  
If you cannot remove the noise completely with the <Fine> function, adjust the <Coarse> and then  
use the <Fine> function again.  
This function is only available in analog mode.  
Response Time  
Accelerates the response time of the LCD panel faster than the original response time so that moving  
pictures appear sharper and more natural.  
<Normal>  
<Faster>  
<Fastest>  
It is recommended setting the Normal or Faster when not viewing a movie.  
COLOR  
3-5  
Using the product  
MENU  
MagicColor  
DESCRIPTION  
Expresses natural colors more clearly without changing the picture quality using proprietary digital  
picture quality improvement technology developed by Samsung Electronics.  
<Off> - Turns the MagicColor function off.  
<Demo> - You can compare the pictures processed by MagicColor with the original pictures.  
<Full> - Provides a clearer picture including areas corresponding to skin color.  
<Intelligent> - Improves the chroma of pictures except for areas corresponding to skin color.  
Red  
You can adjust the red color value of pictures according to your preference.  
This menu is unavailable when <MagicColor> is set to <Full> mode or <Intelligent> mode.  
Green  
Blue  
You can adjust the green color value of pictures according to your preference.  
This menu is unavailable when <MagicColor> is set to <Full> mode or <Intelligent> mode.  
You can adjust the blue color value of pictures according to your preference.  
This menu is unavailable when <MagicColor> is set to <Full> mode or <Intelligent> mode.  
Color Tone  
You can set the color temperature according to your preference.  
<Cool> - Sets the color temperature of the screen to a cooler color.  
<Normal> - Sets the color temperature of the screen to the standard color temperature.  
<Warm> - Sets the color temperature of the screen to a warmer color.  
<Custom> - Select this menu to set the color temperature manually.  
If you do not like the preset color temperatures, you can manually adjust the colors of <Color  
Effect>.  
This menu is unavailable when <MagicColor> is set to <Full> mode or <Intelligent> mode.  
Color Effect  
You can change the overall atmosphere by changing the color of pictures.  
This menu is unavailable when <MagicColor> is set to <Full> mode or <Intelligent> mode.  
<Off> - Turns the color effect function off.  
<Grayscale> -Displays pictures in black and white.  
<Green> - Displays pictures in green mono color.  
<Aqua> - Displays pictures in aqua mono color.  
<Sepia> - Displays pictures in sepia mono color.  
Gamma  
Using this menu, you can change the intensity of the colors of medium brightness.  
(This is unavailable when MagicBright is set to <Dynamic Contrast> mode.)  
SIZE & POSITION  
Using the product  
3-5  
MENU  
H-Position  
DESCRIPTION  
Moves the position of the display area on the screen horizontally.  
This function is only available in analog mode.  
V-Position  
Image Size  
Moves the position of the display area on the screen vertically.  
This function is only available in analog mode.  
PC signals  
<Auto> - The picture is displayed at the aspect ratio of the input signal.  
<Wide> - The picture is displayed in full screen regardless of the aspect ratio of the input signal.  
A signal not in the standard mode table is not supported.  
If the resolution is set to the optimal resolution, the aspect ratio does not change whether  
the <Image Size> is set to <Auto> or <Wide>.  
AV signals  
<4 : 3> - Displays pictures at the 4 : 3 aspect ratio.  
<16 : 9> - Displays pictures at the 16 : 9 aspect ratio.  
<Screen Fit> - If a 720P, 1080i or 1080P signal is input in DVI input mode, the picture is displayed  
as is without truncation.  
This can only be set when the external input is connected through DVI and <PC/AV Mode> is  
set to <AV>.  
Menu H-Position  
Menu V-Position  
You can adjust the horizontal position of the OSD.  
You can adjust the vertical position of the OSD.  
SETUP&RESET  
MENU  
DESCRIPTION  
Reset  
Use this function to restore the visual quality and color settings to the factory defaults.  
<No> - <Yes>  
You can select the transparency of the OSD.  
<Off> - <On>  
Menu Transparency  
3-5  
Using the product  
MENU  
Language  
DESCRIPTION  
Select a language for the OSD.  
The selected language is only applied to the product OSD. This setting does not affect the other  
functions of the PC.  
LED On/Off  
Turns the Menu button LED on or off.  
<Off> - Turns the Power button LED lamp off.  
<On> - Turns the Power button LED lamp on.  
LED Brightness  
Off Timer On/Off  
Adjusts the brightness of the Menu button LED in levels.  
You can turn the Off Timer on or off.  
<Off> - <On>  
Off Timer Setting  
Auto Source  
Turns the power off automatically when the configured time is reached.  
<Auto> - The monitor automatically selects an input signal.  
<Manual> - Users have to manually select an input signal.  
PC/AV Mode  
Set to PC when connected to a PC.  
Set to AV when connected to an AV device.  
This function does not support analog mode.  
Display Time  
The OSD automatically disappears if no action is taken by the user.  
You can determine the time to wait before the OSD is hidden.  
<5 sec> - <10 sec> - <20 sec> - <200 sec>  
Customized Key  
You can set the function of the Customized Key to one of the following.  
<MagicBright> - <MagicColor> - <Color Effect> - <Image Size>  
INFORMATION  
MENU  
DESCRIPTION  
INFORMATION  
Shows the frequency and resolution set on the PC.  
Using the product  
3-5  
4 Installing the Software  
4-1 Natural Color  
What is Natural Color ?  
This software works only for Samsung products and enables adjusting the displayed colors on the product and matches the  
colors on the product with the colors of the printed pictures. For more information, refer to the online help of the software (F1).  
The Natural Color is provided online. You can download it from the website below and install;  
4-1  
Installing the Software  
   
4-2 MagicTune  
What is MagicTune?  
MagicTune is a software program that helps with monitor adjustments by providing comprehensive descriptions of monitor  
functions and easy-to-understand guidelines.  
Users can adjust the product with the mouse and the keyboard without using the operating buttons of the product.  
Installing the Software  
1. Insert the installation CD into the CD-ROM drive.  
2. Select the MagicTune setup program.  
If the pop-up screen for the software installation does not appear on the main screen, find and double-click the  
MagicTune setup file on the CD-ROM.  
3. Select the installation language and click [Next].  
4. Complete the remaining software installation steps according to the instructions displayed on the screen.  
The software may not work properly if you do not restart the computer after the installation.  
The MagicTune icon may not appear depending on the computer system and the product specifications.  
If the shortcut icon does not appear, press the F5 key.  
Restrictions and Problems with the Installation (MagicTune™)  
The installation of MagicTune™may be affected by the graphics card, motherboard and the networking environment.  
System Requirements  
OS  
Windows 2000  
Windows XP Home Edition  
Windows XP Professional  
Windows Vista  
For MagicTune™, Windows 2000 or later is recommended.  
Hardware  
At least 32MB of memory  
At least 60MB of free space on the hard disk drive  
For more information, refer to the website.  
Removing the Software  
You can only remove MagicTune™through [Add or Remove Programs ] in Windows.  
To remove MagicTune™, complete the following steps.  
1. Click [Start] select [Settings], and select [Control Panel] from the menu.  
For Windows XP, click [Start], and select [Control Panel] from the menu.  
2. Double-click the [Add or Remove Programs] icon in the Control Panel.  
Installing the Software  
4-2  
 
3. In the [Add/Remove] window, find and select MagicTune™so that it is highlighted.  
4. Click [Change or Remove Programs] to remove the software.  
5. Select [Yes] to start removing MagicTune™.  
6. Wait until a message box appears informing you that the software has been removed completely.  
For technical support, the FAQ (frequently asked questions) or information about the software upgrade for MagicTune™,  
please visit our website.  
4-2  
Installing the Software  
4-3 MultiScreen  
What is MultiScreen ?  
MultiScreen enables users to use the monitor by partitioning multiple sections.  
Installing the Software  
1. Insert the installation CD into the CD-ROM drive.  
2. Select the MultiScreen setup program.  
If the pop-up screen for the software installation does not appear on the main screen, find and double-click the  
MultiScreen setup file on the CD-ROM.  
3. When the Installation Wizard appears, click [Next].  
4. Complete the remaining software installation steps according to the instructions displayed on the screen.  
The software may not work properly if you do not restart the computer after the installation.  
The MultiScreen icon may not appear depending on the computer system and the product specifications.  
If the shortcut icon does not appear, press the F5 key.  
Restrictions and Problems with the Installation (MultiScreen)  
The MultiScreen installation may be affected by the graphics card, motherboard and the networking environment.  
Operating System  
OS  
Windows 2000  
Windows XP Home Edition  
Windows XP Professional  
Windows Vista  
For MultiScreen, the operating systems Windows 2000 or later is recommended.  
Hardware  
At least 32MB of memory  
At least 60MB of free space on the hard disk drive  
Removing the Software  
Click [Start], select [Settings]/[Control Panel], and then double-click [Add or Remove Programs].  
Select MultiScreen from the program list and click the [Add/Delete] button.  
Installing the Software  
4-3  
 
5 Troubleshooting  
5-1 Monitor Self-Diagnosis  
You can check if the product is working properly using the Self-Diagnosis function.  
If a blank screen is displayed and the Power LED blinks even if the product and the PC are properly connected, perform  
the self-diagnosis function according to the procedures below.  
1. Turn the product and the PC off.  
2. Separate the D-Sub cable from the product .  
3. Turn the product on.  
4. If the product is working properly, the 'Check Signal Cable' message appears.  
In this case, if a blank screen is displayed again, make sure that there is no problem with the PC and the connection. The  
product is working properly.  
5-1  
Troubleshooting  
   
5-2 Before Requesting Service  
Please check the following before requesting After-Sales service. If the problem continues, please contact your nearest  
Samsung Electronics Service Center.  
A BLANK SCREEN APPEARS / I CANNOT TURN THE PRODUCT ON  
Is the power cord connected properly?  
Check the connection status of the power cord.  
Is the “Check Signal Cable” message displayed on the  
screen?  
Check the cable connecting the PC and the product.  
If the message appears on the screen even if the cable is  
properly connected, recheck the input signal by pressing the  
button of the product.  
Is the “Not Optimum Mode” message displayed on the  
screen?  
This occurs when the signal from the graphics card exceeds  
the maximum resolution or the maximum frequency of the  
product.  
In this case, set up the appropriate resolution and the fre-  
quency for the product.  
Is a blank screen displayed and does the power LED blink at  
a 1 second interval?  
This occurs when the power saving function is running.  
If you click the mouse or press any key, the screen will be  
turned on.  
Did you connect with a DVI cable?  
If you connect the DVI cable when the PC has booted up or if  
you reconnect the DVI cable after disconnecting the cable  
while using a PC, the screen may not be displayed because  
some graphics cards do not output the video signal.  
In this case, reboot the PC while the DVI cable is connected.  
THE ON SCREEN ADJUSTMENT MENU (OSD) DOES NOT APPEAR.  
Did you cancel the screen adjustment?  
Check if the <OSD Adjustment Lock> function is set to Off.  
THE COLOR IS WEIRD / THE PICTURE IS DISPLAYED IN BLACK AND WHITE  
Is the entire screen displayed in the same color as if viewing  
the screen through a cellophane paper?  
Check the cable connection to the computer.  
Reinsert the graphics card into the computer completely.  
Check if the <Color Effect> is set to <Off>.  
Is the graphics card configured correctly?  
Set up the graphics card referring to the user manual.  
THE DISPLAY AREA SUDDENLY MOVES TO AN EDGE OR TO THE CENTER.  
Did you change the graphics card or the driver?  
Please press the [AUTO] button to run the auto adjustment  
function.  
Did you change the resolution and frequency appropriate to  
the product?  
Set the resolution and the frequency to the appropriate values  
in the graphics card  
refer to the (Standard Signal Mode Table)  
Is the graphics card configured correctly?  
Set up the graphics card referring to the user manual.  
THE PICTURES ARE OUT-OF-FOCUS.  
Did you change the resolution and the frequency appropriate  
to the product?  
Set the resolution and the frequency to the appropriate values  
in the graphics card  
refer to the (Standard Signal Mode Table)  
Troubleshooting  
5-2  
 
THE COLOR IS DISPLAYED IN 16 BIT (16 COLORS). THE COLOR HAS BEEN CHANGED AFTER CHANGING THE  
GRAPHICS CARD.  
Did you install the device driver for the product?  
Windows ME/XP/2000 : Set the color again by selecting Con-  
trol Panel Display Settings.  
Is the graphics card configured correctly?  
Configure the color again in accordance with the new graph-  
ics card driver.  
WHEN I CONNECT THE MONITOR, THE 'UNKNOWN MONITOR, PLUG&PLAY (VESA DDC) MONITOR FOUND'  
MESSAGE IS DISPLAYED.  
Did you install the device driver for the product?  
Install the device driver referring to the descriptions about the  
driver installation.  
Check if all the Plug&Play (VESA DDC) functions are sup-  
ported referring to the User Manual of the graphics card.  
Install the device driver referring to the descriptions about the  
driver installation.  
WHEN I LOOK AT THE EXTERIOR EDGES OF THE PRODUCT, SMALL ALIEN SUBSTANCES APPEAR ON IT.  
Since this product is designed so that the color has a soft appearance by coating it with a transparent material over the black  
edges, such things may be seen. This is not a defect of the product.  
A “BEEP, BEEP” SOUND IS HEARD WHEN BOOTING THE COMPUTER.  
If the beep sound is generated 3 or more times when booting up the computer, please request service for the computer.  
5-2  
Troubleshooting  
5-3 FAQ  
FAQ!  
PLEASE TRY THE FOLLOWING!  
How can I change the frequency of the video signal?  
You have to change the frequency of the graphics card.  
(For more information, refer to the User Manual of the com-  
puter or the graphics card.)  
How can I change the resolution?  
Windows XP : Change the resolution by selecting Control  
Panel Appearance and Themes Display Settings.  
Windows ME/2000 : Change the resolution by selecting Con-  
trol Panel Display Settings.  
(For more information, refer to the User Manual of the com-  
puter or the graphics card.)  
How can I use the power saving function?  
Windows XP : Configure it by selecting Control Panel →  
Appearance and Themes Display Screen Saver Set-  
ting or configure it in the BIOS Setup of the computer.  
Windows ME/2000 : Configure it by selecting Control Panel  
Display Screen Saver Setting or Configure it in the  
BIOS Setup of the computer.  
For more information, refer to the Windows user manual for  
the computer.  
Troubleshooting  
5-3  
 
6 More Information  
6-1 Specifications  
MODEL NAME  
P1950W  
P2050 / P2050G  
P2250 / P2250G  
P2350 / P2350G  
LCD  
Size  
19 inch (48 cm)  
20 inch (50 cm)  
21.53 inch (54 cm)  
23 inch (58 cm)  
Panel  
Display area  
408.24 mm (H) X  
255.15 mm (V)  
442.8 mm (H) X  
249.075 mm (V)  
476.64 mm (H) X  
268.11 mm (V)  
509.73 mm (H) X  
286.74 mm (V)  
Pixel Pitch  
0.2835 mm (H) X  
0.2835 mm (V)  
0.2768 mm (H) X  
0.2768 mm (V)  
0.248 mm (H) X 0.248 0.2655 mm (H) X  
mm (V) 0.2655 mm (V)  
Syn-  
chroni-  
zation  
Horizontal  
Vertical  
30~81 kHz  
56~75 Hz  
56~60 Hz  
Display Color  
16.7M  
Reso-  
lution  
Optimum reso- 1440 X 900 @ 60 Hz  
lution (RB)  
1600 X 900 @ 60 Hz  
(RB)  
1920 X 1080 @ 60 Hz 1920 X 1080 @ 60 Hz  
(RB) (RB)  
Maximum res- 1440 X 900 @ 60 Hz  
olution (RB)  
1600 X 900 @ 60 Hz  
(RB)  
1920 X 1080 @ 60 Hz 1920 X 1080 @ 60 Hz  
(RB) (RB)  
RGB Analog, DVI(Digital Visual Interface)  
0.7 Vp-p ± 5 %  
Input Signal, Terminated  
Maximum Pixel Clock  
Separate H/V sync, Composite, SOG  
TTL Level (V high 2.0 V, V low 0.8 V)  
165 MHz (Analog, Dig- 164 MHz (Analog, Digital)  
ital)  
Power Supply  
Signal Cable  
AC 100 - 240 V~ (+/- 10 %), 50/60 Hz ± 3 Hz  
15pin-to-15pin D-sub cable, Detachable  
DVI-D to DVI-D connector, Detachable  
Dimensions (WxHxD) /  
Weight (Simple stand)  
449 x 314 x 66 mm /  
17.7 x 12.4 x 2.6 inch  
(Without Stand)  
486.6 x 308.3 x 65 mm 518.2 x 327.7 x 66 mm 555.8 x 345.0 x 63.8  
/ 19.2 x 12.1 x 2.6 inch / 20.4 X 12.9 X 2.6  
mm / 21.9 X 13.6 X 2.5  
inch (Without Stand)  
(Without Stand)  
inch (Without Stand)  
449 x 384 x 190 mm /  
486.6 x 377.3 x 189.4  
518.2 x 396.7 x 189.4  
555.8 x 416.2 x 189.4  
17.7 x 15.1 x 7.5 inch / mm / 19.2 x 14.9 x 7.5 mm / 20.4 X 15.6 X 7.5 mm / 21.9 X 16.4 X 7.5  
4.3 kg / 9.5 Ibs (With  
Stand)  
inch / 4.4 kg / 9.7 Ibs  
(With Stand)  
inch / 4.4 kg / 9.7 Ibs  
(With Stand)  
inch / 5.1 kg / 11.2 Ibs  
(With Stand)  
Envi-  
ron-  
mental  
consid-  
era-  
Operating  
Storage  
Temperature : 50°F ~ 104°F (10°C ~ 40°C)  
Humidity : 10 % ~ 80 %, non-condensing  
Temperature : -4°F ~ 113°F (-20°C ~ 45°C)  
Humidity : 5 % ~ 95 %, non-condensing  
tions  
Tilt  
-2° ~ 21°  
Class B (Information Communication equipment for residential use)  
This device has been registered regarding EMI for home use (Class B). It may be used in all areas. (Class B equipment  
emits less electromagnetic waves than Class A equipment.)  
6-1  
More Information  
   
6-2 Power Saving Function  
This product provides a power saving function that automatically turns the screen off when the product is not used for a  
predetermined period of time to reduce power consumption. If the product enters power saving mode, the power LED turns to a  
different color to indicate that the product is in power saving mode.  
When the product is in power saving mode, the power is not turned off and you can turn the screen on again by pressing any key  
or clicking the mouse. However, the power saving function only works when the product is connected to a computer that provides  
the power saving function.  
STATE  
NORMAL OPERATION  
POWER SAVING MODE  
POWER OFF  
Power Indicator  
On  
Blinking  
Off  
P1950W : 34 watts  
P2050 / P2050G : 34 watts  
P2250 / P2250G : 38 watts  
P2350 / P2350G : 40 watts  
Power Consumption  
Less than 1 watts  
Less than 1 watts  
If there is no power cut-off switch, the power consumption is "0" only when the power cord is disconnected.  
This product satisfies the ENERGY STAR® specifications.  
More Information  
6-2  
 
6-3 Contact SAMSUNG WORLDWIDE  
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center.  
NORTH AMERICA  
U.S.A  
1-800-SAMSUNG(726-7864)  
1-800-SAMSUNG(726-7864)  
01-800-SAMSUNG(726-7864)  
CANADA  
MEXICO  
LATIN AMERICA  
ARGENTINA  
BRAZIL  
0800-333-3733  
0800-124-421  
4004-0000  
CHILE  
800-SAMSUNG(726-7864)  
01-8000112112  
0-800-507-7267  
1-800-10-7267  
COLOMBIA  
COSTA RICA  
ECUADOR  
EL SALVADOR  
GUATEMALA  
HONDURAS  
JAMAICA  
800-6225  
1-800-299-0013  
800-7919267  
1-800-234-7267  
00-1800-5077267  
800-7267  
NICARAGUA  
PANAMA  
PUERTO RICO  
REP. DOMINICA  
TRINIDAD & TOBAGO  
VENEZUELA  
1-800-682-3180  
1-800-751-2676  
1-800-SAMSUNG(726-7864)  
0-800-100-5303  
EUROPE  
AUSTRIA  
BELGIUM  
0810 - SAMSUNG(7267864,€ 0.07/min) http://www.samsung.com/at  
02 201 2418  
(French)  
CZECH REPUBLIC  
800 - SAMSUNG (800-726786)  
DENMARK  
EIRE  
8 - SAMSUNG (7267864)  
0818 717 100  
FINLAND  
FRANCE  
GERMANY  
30 - 6227 515  
01 4863 0000  
01805 - SAMSUNG (7267864,€ 0.14/  
Min)  
6-3  
More Information  
 
EUROPE  
HUNGARY  
ITALIA  
06-80-SAMSUNG(726-7864)  
800-SAMSUNG(726-7864)  
02 261 03 710  
LUXEMBURG  
NETHERLANDS  
0900 - SAMSUNG (0900-7267864) (€  
0.10/Min)  
NORWAY  
POLAND  
3 - SAMSUNG (7267864)  
0 801 1SAMSUNG (172678)  
022 - 607 - 93 - 33  
PORTUGAL  
SLOVAKIA  
SPAIN  
808 20 - SAMSUNG (7267864)  
0800-SAMSUNG(726-7864)  
902 - 1 - SAMSUNG (902 172 678)  
075 - SAMSUNG (726 78 64)  
SWEDEN  
SWITZERLAND  
0848-SAMSUNG(7267864, CHF 0.08/  
min)  
U.K  
0845 SAMSUNG (7267864)  
CIS  
ESTONIA  
800-7267  
LATVIA  
8000-7267  
LITHUANIA  
KAZAKHSTAN  
KYRGYZSTAN  
RUSSIA  
8-800-77777  
8-10-800-500-55-500  
00-800-500-55-500  
8-800-555-55-55  
8-10-800-500-55-500  
8-800-502-0000  
8-10-800-500-55-500  
TADJIKISTAN  
UKRAINE  
UZBEKISTAN  
ASIA PACIFIC  
AUSTRALIA  
CHINA  
1300 362 603  
800-810-5858  
400-810-5858  
010-6475 1880  
HONG KONG:3698 - 4698  
INDIA  
3030 8282  
1800 110011  
1-800-3000-8282  
INDONESIA  
JAPAN  
0800-112-8888  
0120-327-527  
MALAYSIA  
NEW ZEALAND  
1800-88-9999  
0800 SAMSUNG (0800 726 786)  
More Information  
6-3  
ASIA PACIFIC  
PHILIPPINES  
1800-10-SAMSUNG(726-7864)  
1800-3-SAMSUNG(726-7864)  
02-5805777  
SINGAPORE  
THAILAND  
1800-SAMSUNG(726-7864)  
1800-29-3232  
02-689-3232  
TAIWAN  
0800-329-999  
1 800 588 889  
VIETNAM  
MIDDLE EAST & AFRICA  
SOUTH AFRICA  
TURKEY  
0860-SAMSUNG(726-7864)  
444 77 11  
U.A.E  
800-SAMSUNG(726-7864)  
8000-4726  
6-3  
More Information  
6-4 Correct Disposal of This Product  
(Waste Electrical & Electronic Equipment) - Europe only  
(Applicable in the European Union and other European countries with separate collection systems)  
This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g.  
charger, headset, USB cable) should not be disposed of with other household waste at the end of their working  
life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please sepa-  
rate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of mate-  
rial resources.  
Household users should contact either the retailer where they purchased this product, or their local government  
office, for details of where and how they can take these items for environmentally safe recycling.  
Business users should contact their supplier and check the terms and conditions of the purchase contract. This  
product and its electronic accessories should not be mixed with other commercial wastes for disposal.  
More Information  
6-4  
 
6-4  
More Information  

Westcott 1095 User Manual
ViewSonic Car Video System VS10697 User Manual
Sony Walkman WM FX493 User Manual
Sony Handycam DCR PC109 User Manual
Sony DCR HC42E User Manual
Sony Camcorder HDR SR10E User Manual
Sanyo Xacti VPC CA102 User Manual
Samsung VP D301(i) User Manual
Samsung ST60 User Manual
Roland DS 7 User Manual