Samsung Blu ray BDE5400 User Manual

BD-E5400  
Blu-ray Disc Player  
user manual  
imagine the possibilities  
Thank you for purchasing this Samsung product.  
To receive more complete service,  
please register your product at  
ENGLISH  
12. Use only with the cart,  
stand, tripod, bracket,  
Disc Storage  
` Do not keep in direct sunlight.  
Contents  
or table specified by  
` Keep in a cool ventilated area.  
the manufacturer,  
` Keep in a clean protection jacket and  
Language Settings.....................................13  
Security Settings........................................13  
General Settings........................................13  
Support Settings .......................................13  
SAFETy INFORmATION  
or sold with the  
store vertically.  
apparatus. When  
Warning.......................................................2  
Precautions .................................................2  
Disc Storage & Management.......................3  
Handling Cautions .......................................3  
Copyright ....................................................3  
a cart is used, use  
Handling Cautions  
caution when moving the cart/apparatus  
combination to avoid injury from tip-over.  
Do not expose this apparatus to dripping  
or splashing. Do not put objects filled with  
liquids, such as vases on the apparatus.  
mEdIA pLAy  
13. Unplug this apparatus during lightning  
storms or when unused for long periods  
of time.  
Insert a Disc ..............................................14  
Insert a USB Device...................................14  
Controlling Video Playback ........................15  
Controlling Music Playback........................15  
Playing Photo Contents.............................16  
To turn this apparatus off completely, you  
must pull the power plug out of the wall  
socket. Consequently, the power plug must  
be easily and readily accessible at all times.  
GETTING STARTEd  
14. Refer all servicing to qualified service  
personnel. Servicing is required when  
the apparatus has been damaged in any  
way, such as when the power-supply  
cord or plug is damaged, liquid has  
been spilled or objects have fallen into  
the apparatus, the apparatus has been  
exposed to rain or moisture, does not  
operate normally, or has been dropped.  
Before using the User Manual......................4  
Logos of Discs the player can play ..............4  
Accessories.................................................5  
Front Panel..................................................6  
Rear Panel...................................................6  
Remote Control...........................................6  
Do not plug multiple electric devices into  
the same wall socket. Overloading a socket  
can cause it to overheat, resulting in a fire.  
AppENdIx  
Maintenance of Cabinet.  
Troubleshooting.........................................16  
-
-
Before connecting other components to  
this player, be sure to turn them off.  
Specifications............................................18  
If you move your player suddenly from a  
cold place to a warm place, condensation  
may occur on the operating parts and  
lens and cause abnormal disc playback. If  
this occurs, unplug the player, wait for two  
hours, and then connect the plug to the  
power outlet. Then, insert the disc, and try  
to play back again.  
CONNECTIONS  
Disc Storage & Management  
Holding Discs  
A. Connecting to a TV .................................7  
B. Connecting to an Audio System..............7  
C. Connecting to a Network ........................7  
-
Fingerprints or scratches  
on a disc may reduce  
sound and picture quality  
or cause skipping  
SETTINGS  
If the product makes an abnormal noise  
or produces a burning smell or smoke,  
turn off the power switch immediately and  
disconnect the power plug from the wall  
outlet. Then, contact the nearest customer  
service center for technical assistance. Do  
not use the product. Using the product as  
it is may cause a fire or an electric shock.  
The Initial Settings Procedure.......................8  
Menu Navigation..........................................8  
Accessing the Settings Menu ......................9  
Display Settings...........................................9  
Audio Settings...........................................10  
Network Settings.......................................10  
System Settings ........................................12  
-
-
-
Avoid touching the surface of a disc  
where data has been recorded.  
Hold the disc by the edges so that  
fingerprints will not get on the surface.  
Do not stick paper or tape on the disc.  
Cleaning Discs  
Copyright  
-
If you get fingerprints or dirt  
on a disc, clean it with a mild  
detergent diluted in water  
and wipe with a soft cloth.  
© 2012 Samsung Electronics Co.,Ltd.  
All rights reserved; No part or whole of this  
user's manual may be reproduced or copied  
without the prior written permission of  
Samsung Electronics Co.,Ltd.  
-
When cleaning, wipe gently  
from the inside to the outside of the disc.  
3
Some USB/External HDD/digital camera  
Region Code  
devices may not be compatible with the player.  
Getting Started  
Both players and discs are coded by region.  
These regional codes must match for a disc  
to play. If the codes do not match, the disc  
will not play.  
Your player supports the FAT16, FAT32,  
and NTFS file systems.  
Before using the User Manual  
Connect USB devices directly to the players  
USB port. Connecting through a USB cable  
may cause compatibility problems.  
The Region Code for this player is displayed  
on the rear panel of the player.  
disc Types and Contents your player can play  
Inserting more than one memory device  
into a multi-card reader may cause the  
reader to operate improperly.  
Media  
Disc Type  
Details  
Region  
Disc Type  
Area  
The player does not support the PTP protocol.  
Code  
Blu-ray Disc  
BD-ROM or BD-RE/-R recorded in the BD-RE format.  
Do not disconnect a USB device during a  
DVD-VIDEO  
DVD-RW  
DVD-R  
North America, Central  
“loading” process.  
DVD-VIDEO, recorded DVD+RW/DVD-RW(V)/DVD-R/+R that have  
been recorded and finalized, or a USB storage media containing MKV  
or MP4 contents.  
Blu-ray  
Disc  
America, South America,  
Korea, Japan, Taiwan, Hong  
Kong and South East Asia.  
VIDEO  
The bigger the image resolution, the longer  
A
the image takes to display.  
DVD+RW  
This player cannot play MP3 files with DRM  
(Digital Rights Management) downloaded  
from commercial sites.  
DVD+R  
DVD-  
The U.S., U.S. territories and  
CD-RW/-R,  
DVD-RW/-R,  
BD-RE/-R  
1
VIDEO  
Canada  
Music recorded on CD-RW/-R, DVD-RW/-R, BD-RE/-R or a USB  
storage media containing MP3 or WMA contents.  
MUSIC  
PHOTO  
Your player only supports video with a  
frame rate under 30fps (frames per second).  
Your player only supports USB Mass  
Storage Class (MSC) devices such as  
thumb drives and USB HDD. (HUB is not  
supported.)  
CD-RW/-R,  
DVD-RW/-R,  
BD-RE/-R  
Logos of Discs the player can play  
Photos recorded on CD-RW/-R, DVD-RW/-R, BD-RE/-R or a USB  
storage media containing JPEG contents.  
NOTE  
Certain USB HDD Devices, multi-card  
readers and thumb drives may not be  
compatible with this player.  
`
`
`
`
The player may not play certain CD-RW/-R and DVD-R because of the disc type or recording conditions.  
If a DVD-RW/-R has not been recorded properly in DVD video format, it will not be playable.  
Your player will not play content that has been recorded on a DVD-R at a bit-rate that exceeds 10 Mbps.  
Blu-ray Disc  
BD-LIVE  
If some USB devices require excessive  
power, they may be limited by the circuit  
safety device.  
Your player will not play content that has been recorded on a BD-R or USB device at a bitrate that exceeds  
25 Mbps.  
If playback from a USB HDD is unstable,  
provide additional power by plugging the  
HDD into a wall socket.  
`
Playback may not work for some types of discs, or when you use specific functions, such as angle change  
and aspect ratio adjustment. Information about the discs is written in detail on the disc box. Please refer to  
this if necessary.  
NTSC broadcast system in U.S.A, Canada, Korea, Japan  
If the problem continues, contact the USB  
HDD manufacturer.  
`
When you play a BD-J title, loading may take longer than a normal title or some functions may perform slowly.  
Supported File Formats  
You must remove the USB storage device  
safely. (by performing the "Safely Remove  
USB" function to prevent possible damage  
to the USB memory.)  
disc types your player cannot play  
Notes on the USB connection  
HD DVD  
DVD-RAM  
DVD-RW(VR mode) 3.9 GB DVD-R for  
Your player supports USB storage media,  
MP3 players, digital cameras, and USB  
card readers.  
Authoring.  
Press the HOmE button to move to the  
home screen, press the yELLOW (C)  
button, and then press the v button.  
DVD-ROM/PD/  
Super Audio CD  
CVD/CD-ROM/  
MV, etc  
(except CD layer)  
CDV/CD-G/CD-I/LD  
(CD-Gs play audio  
only, not graphics.)  
The player does not support folder or file  
names longer than 128 characters.  
4
SAMSUNG is not responsible for any data file damage or data loss.  
Audio decoder  
Your player does not support NTFS compressed files, sparse files, or encrypted files.  
You can repair or format a USB device on your Desktop PC. (MS-Windows OS only)  
- Supports WMA 7, 8, 9 and STD  
- Does not support WMA sampling rate of 22050Hz mono.  
Video File Support  
Music File Support  
File Extension  
Container  
Video Codec  
MP4v3  
Audio Codec  
Resolution  
1920x1080  
File Extension  
Container  
Audio Codec  
Support Range  
*.mp3  
-
MP3  
Dolby Digital  
DTS  
MP3  
MP3  
* Sampling rates (in kHz) - 8, 11, 16, 22, 32, 44.1, 48  
*.avi  
AVI  
*.wma  
WMA  
WMA  
* Bit rates - All bit-rates from 5kbps to 384kbps  
WMA  
1920x1080  
H.264 BP/MP/HP  
PCM  
AVCHd (Advanced Video Codec High definition)  
MP3  
Dolby Digital  
DTS  
1920x1080  
1920x1080  
VC-1 AP  
This player can play back AVCHD format discs. These discs are normally recorded and used  
*.mkv  
MKV  
in camcorders.  
H.264 BP/MP/HP  
The AVCHD format is a high definition digital video camera format.  
1920x1080  
1920x1080  
1920x1080  
1920x1080  
1920x1080  
1920x1080  
1920x1080  
VC-1 AP  
*.wmv  
*.mp4  
WMV (wmv9)  
MP4  
WMA  
The MPEG-4 AVC/H.264 format compresses images with greater efficiency than the  
VC-1 SM  
conventional image compressing format.  
MP4 (mp4v)  
H.264 BP/MP/HP  
MPEG1  
Some AVCHD discs use the “x.v.Color” format. This player can play back AVCHD discs that  
AAC  
use “x.v.Color” format.  
MP1, 2  
Dolby Digital  
DTS  
“x.v.Color” is a trademark of Sony Corporation.  
*.mpg  
PS  
MPEG2  
“AVCHD” and the AVCHD logo are trademarks of Matsushita Electronic Industrial Co., Ltd.  
*.mpeg  
and Sony Corporation.  
H.264 BP/MP/HP  
NOTE  
Limitations  
`
Some AVCHD format discs may not play, depending on the recording condition.  
AVCHD format discs need to be finalized.  
- Even when a the file is encoded by a supported codec mentioned above, the file might not  
be played if its content has a problem.  
`
`
“x.v.Color” offers a wider color range than normal DVD camcorder discs.  
- Normal playback is not guaranteed if the files container information is wrong or the file  
itself is corrupted.  
Some MKV and MP4 format discs may not play, depending on the video resolution and frame rate condition.  
- Files having higher Bit rate/frame rate than standard may stutter during sound/video playback.  
Accessories  
- The Seek (skip) function is not available if the files index table is damaged.  
Video decoder  
Check for the supplied accessories shown below.  
- Supports up to H.264 Level 4.1 and AVCHD  
- Does not support H.264 FMO/ASO/RS and VC1 SP/MP/AP L4  
- MPEG4 SP, ASP :  
Below 1280 x 720 : 60 frames max  
Above 1280 x 720 : 30 frames max  
- Does not support GMC 2 or higher  
Batteries for Remote Control  
(AAA Size) (BN43-00004A)  
User Manual  
(AK68-02273A)  
Remote Control  
(AK59-00146A)  
5
Front Panel  
Remote Control  
PLAY/PAUSE BUTTON  
Tour of the Remote Control  
STOP BUTTON  
Turn the player on and off.  
Press to eject a disc.  
Turn the TV on and off.  
OPEN/CLOSE BUTTON  
POWER BUTTON  
After setup, allows you to set the input  
source on your TV.  
TV volume adjustment.  
Press numeric buttons to operate options.  
Use to enter the disc menu.  
Use to enter the popup menu/title menu.  
Press to skip backwards or forwards.  
Press to search a disc backwards or  
forwards.  
REMOTE CONTROL SENSOR  
Press to stop a disc.  
Press to play a disc.  
Press to move to the home menu.  
Press to pause a disc.  
DISC TRAY  
Press to use Netflix.  
Press to use Pandora.  
NOTE  
`
When the player displays the Blu-ray Disc menu, you cannot start the movie by pressing the Play button  
on the player or the remote. To play the movie, you must select Play Movie or Start in the disc menu, and  
Press to use Tools menu.  
Use to display the playback information  
when playing a Blu-ray Disc/DVDs.  
then press the  
button.  
v
Use to select menu items and change menu  
values.  
Rear Panel  
Press to exit the menu.  
Return to the previous menu.  
These buttons are used both for menus on the  
player and also several Blu-ray Disc functions.  
Allows you to repeat a title, chapter, track or  
Press to see the full screen on a TV.  
disc.  
Press to switch the Blu-ray Disc/DVDs  
Use to access various audio functions on a  
subtitle language.  
disc (Blu-ray Disc/DVD).  
NOTE  
Installing batteries  
`
If the remote does not operate properly:  
Check the polarity (+/–) of the batteries.  
Check if the batteries are drained.  
Check if the remote sensor is blocked by  
obstacles.  
HDMI OUT  
USB HOST  
Check if there is any fluorescent lighting nearby.  
NOTE  
CAUTION  
!
`
You can perform software upgrades using the USB Host jack with a USB flash memory stick only.  
`
Dispose of batteries according to local environmental  
6
regulations. Do not put them in the household trash.  
Connecting to an Audio System (HdmI supported AV receiver)  
Connections  
1.  
2.  
Using an HDMI cable, connect the HdmI OUT terminal on the rear of the player to the  
HdmI IN terminal of your AV receiver. See page 8.  
A. Connecting to a TV  
Using an HDMI cable, connect the HdmI OUT terminal of the AV receiver to the HdmI IN  
terminal of your TV.  
Connecting to a TV with an HdmI Cable  
3.  
Turn on the player, TV, and AV receiver.  
4.  
Using the input select button of the AV receiver and TV, select the correct HDMI input or  
source on each to hear sound and see video from the player. Refer to your AV receivers  
user manual to set the AV receivers audio input.  
1.  
Using an HDMI cable, connect the HdmI OUT terminal on the rear of the player to the  
HdmI IN terminal of your TV. See page 8.  
2.  
Turn on the player and TV.  
5.  
If this is the first time you have turned on the Blu-ray player, the Initial Settings screen  
3.  
Press the input selector on your TV remote control until the HDMI signal from the player  
appears. See page 8.  
appears on your TV screen.  
4.  
If this is the first time you have turned on the Blu-ray player, the Initial Settings screen  
appears. See page 8.  
C. Connecting to a Network  
This player lets you use network based services, such as BD-LIVE, and download software  
upgrades when it is connected to a network. We recommend using a Broadband modem (with  
integrated router) or an IP router for the connection. For more information on router connections,  
refer to the user manual of the router or contact the router manufacturer for technical assistance.  
NOTE  
`
`
An HDMI cable outputs digital video/audio, so you don’t need to connect an audio cable.  
If the player is connected to your TV in the HDMI 720p, 1080i, or 1080p output mode, you must use a  
High speed (category 2) HDMI cable.  
`
HDMI outputs only a pure digital signal to the TV.  
Wireless Network  
If your TV does not support HDCP (High-bandwidth Digital Content Protection), random noise appears on  
the screen.  
1.  
2.  
You can connect this unit to a network via a wireless connection. See page 8.  
`
`
Depending on your TV, certain HDMI output resolutions may not work. Please refer to the user manual of  
Set the network options. See pages 10~12.  
your TV.  
When you connect the player to the TV using the HDMI cable for the first time or to a new TV, the HDMI  
output resolution will be automatically set to the highest supported by the TV.  
NOTE  
`
If your wireless router supports DHCP, this player can use a DHCP or static IP address to connect to the  
wireless network.  
`
`
A long HDMI cable may cause screen noise. If this occurs, set Deep Color to Off in the menu.  
If you use an HDMI-to-DVI cable to connect to your display device, you must also connect the Digital Audio  
`
`
Set your wireless router to Infrastructure mode. Adhoc mode is not supported.  
The player supports only the following wireless security key protocols:  
- WEP (OPEN/SHARED), WPA-PSK (TKIP/AES), WPA2-PSK (TKIP/AES)  
Out to an audio sytem to hear audio.  
B. Connecting to an Audio System  
`
`
`
Select a channel on the wireless router that is not currently being used. If the channel set for the wireless  
router is currently being used by another device nearby, it will result in interference and communication  
failure.  
Please turn the volume down when you turn on the AV receiver. A sudden loud sound  
If you select the Pure High-throughput (Greenfield) 802.11n mode and set the Encryption type on your  
router to WEP, TKIP or TKIP-AES (WPS2Mixed), the player will not support a connection in compliance with  
new Wi-Fi certification specifications.  
may cause damage to the speakers and your ears.  
Please set the audio format according to the capabilities of your AV receiver.  
The position of HDMI input terminals may vary depending on your AV receiver. Please  
Wireless LAN, by its nature, may cause interference, depending on the operating conditions (router  
refer to the user manual of your AV receiver.  
performance, distance, obstacles, interference by other radio devices, etc).  
7
Settings  
Connecting to a TV  
A
B
`
If you leave the player in the stop mode for  
more than 5 minutes without using it, a screen  
saver will appear on your TV. If the player is  
left in the screen saver mode for more than 25  
minutes, the power will automatically turn off.  
The Initial Settings Procedure  
The Home screen will not appear if you do not  
configure the initial settings.  
HDMI cable  
The OSD (On Screen Display) may change in this  
player after you upgrade the software version.  
(not included)  
Menu Navigation  
The access steps may differ depending on the  
menu you selected.  
Connecting to an Audio System  
After the loading process of this product is  
finished, the panel buttons and remote control  
can be operated.  
1
2
HDMI cable  
(not included)  
The Initial Settings Procedure lets you set  
the OSD and menu languages, configure  
the connection to your home network, and  
choose the aspect ratio output (screen size  
and format) that is correct for your TV.  
3
4
HOME Button : Press to move to the Home  
1
NOTE  
menu.  
HDMI cable  
(not included)  
`
`
The Home menu will not appear if you do not  
RETURN Button : Return to the previous menu.  
2
3
4
configure the initial settings except as noted below.  
If you press the BLUE (D) button during  
(Enter) / DIRECTION Button :  
v
network setup, you can access the Home menu  
Move the cursor or select an item.  
Activate the currently selected item.  
Confirm a setting.  
even if the network setup is not completed yet.  
`
`
When you return to the Home menu, the full  
screen mode is cancelled automatically.  
EXIT Button : Press to exit the current menu.  
If you want to display the Initial Setting screen  
Network  
C
again to make changes, press the button on  
@
Home menu  
the front panel of the player for more than 5  
seconds with no disc inserted. This resets the  
player to its default settings.  
3
4
5
`
`
After the loading process of this product is  
finished, you can operate the HDMI-CEC function.  
®
PANDORA  
i
n
t
e
r
n
e
t
r
a
d
i
o
YouTube  
2
HD Movies  
CinemaNow  
Wireless Router  
If you want to use an Anynet+(HDMI-CEC)  
function, please follow the instructions below.  
6
7
Videos  
1) Connect the player to an Anynet+(HDMI-  
CEC) compliant Samsung TV using HDMI Cable.  
Broadband service  
8
1
2) Set the Anynet+(HDMI-CEC) feature to On in  
both the TV and the player.  
9
NOTE : You can only connect this unit to a network via a wireless connection.  
3) Set the TV to the Initial Settings Procedure.  
No Disc  
a
Change Device  
d
View Devices  
"
Enter  
0
8
NOTE  
NOTE  
Resolution  
Selects Videos.  
Selects Netflix.  
Selects VUDU HD Movies.  
Selects CinemaNow.  
Selects Pandora Internet Radio.  
Selects YouTube.  
Selects Photos.  
Selects Music.  
Selects Settings.  
1
2
3
4
5
6
7
8
9
`
The access steps may differ depending on  
`
If the TV you connected to the player does not  
Lets you set the output resolution of the HDMI  
video signal to Auto, 1080p, 1080i, 720p or  
480p. The number indicates the number of  
lines of video per frame. The i and p indicate  
interlaced and progressive scan, respectively.  
The more lines, the higher the quality.  
the menu you selected. The OSD (On Screen  
Display) may change in this player after you  
upgrade the software version.  
support Movie Frame or the resolution you  
selected, the message “If no pictures are shown  
after selecting ‘Yes’, please wait for 15 seconds  
to return to the previous resolution. Do you  
want to change the resolution?” appears. If you  
select Yes, the TV’s screen will go blank for 15  
seconds, and then the resolution will revert to  
the previous resolution automatically.  
Display Settings  
®
Resolution according to the output  
You can configure various display options  
such as the TV Aspect Ratio, Resolution, etc. mode  
`
If the screen stays blank after you have  
changed the resolution, remove all discs,  
TV Aspect Ratio  
Blu-ray disc/E-contents/digital Contents  
and then press and hold the button on the  
@
playback  
front of the player for more than 5 seconds.  
All settings are restored to the factory default.  
Follow the steps on the previous page to  
access each mode and select the Display Setup  
that your TV will support.  
Depending on the type of television you have,  
you may want to adjust the screen size setting.  
HDMI / connected  
HDMI Mode  
Output  
NOTE  
Displays the buttons you can use on the  
E-contents/  
0
Setup  
remote to access functions.  
`
`
Depending on the disc type, some aspect  
ratios may not be available.  
Blu-ray Disc  
Digital  
`
`
When the factory default settings are restored,  
all stored user BD data is deleted.  
contents  
If you select an aspect ratio and option which is  
different than the aspect ratio of your TV screen,  
the picture might appear to be distorted.  
NOTE  
The Blu-ray Disc must have the 24 frame feature  
for the player to use the Movie Frame (24Fs) mode.  
Resolution of  
BD Wise  
1080p  
`
The Videos, Photos, and Music options require  
that you have an appropriate disc inserted into the  
player or a USB flash device attached to the player.  
Blu-ray Disc  
Max. Resolution Max. Resolution  
`
`
If you select the 4:3 Pan-Scan or 4:3 Letter  
Box, pressing the FULL SCREEN button on the  
remote will not bring up a full screen picture.  
Auto  
movie Frame (24Fs)  
of TV input  
1080@60F  
of TV input  
1080@60F  
`
The Netflix, VUDU, Cinema Now, Pandora, and  
YouTube options require a working Internet  
connection.  
1080p@60F  
Setting the Movie Frame (24Fs) feature to  
Auto allows you to adjust the players HDMI  
output to 24 frames per second for improved  
picture quality.  
If you select the 16:9 Original, your TV may display  
4:3 Pillarbox (black bars on sides of picture). If this  
occurs, pressing the FULL SCREEN button on the  
remote will not bring up a full screen picture.  
(Movie Frame : Off)  
Movie Frame :  
Auto (24Fs)  
1080@24F  
1080p@24F  
You can enjoy the Movie Frame (24Fs) feature  
only on a TV supporting this frame rate.  
You can select Movie Frame only when the  
player is in the HDMI 1080i or 1080p output  
resolution modes.  
Accessing the Settings Menu  
1080i  
720p  
480p  
1080i  
720p  
480p  
1080i  
720p  
480p  
Bd Wise (Samsung TVs only)  
To access the Settings menu and sub-menus,  
BD Wise is Samsungs latest inter-connectivity feature.  
follow these steps:  
When you connect a Samsung player and a Samsung TV  
with BD Wise to each other via HDMI, and BD Wise is on  
in both the player and TV, the player outputs video at the  
video resolution and frame rate of the Blu-ray Disc/DVDs.  
dVd playback  
1.  
2.  
3.  
Press the pOWER button.  
The Home Menu appears.  
HdmI Color Format  
Output  
Setup  
HDMI / connected  
Press the ◄► buttons to select Settings,  
HDMI Mode  
Lets you set the color space format for  
and then press the  
button.  
v
NOTE  
BD Wise  
Auto  
480i  
HDMI output to match the capabilities of the  
Press the ▲▼ buttons to select the  
cHodnnmecIteddedeevpiceC(oTVl,omronitor, etc).  
`
When BD Wise is on, the Resolution setting  
automatically defaults to BD Wise and BD Wise  
appears in the Resolution menu.  
Max. Resolution of TV input  
desired submenu, and then press the  
1080p  
1080i  
1080p  
1080i  
720p  
480p  
button.  
v
`
`
If the player is connected to a device that does not  
4.  
5.  
Press the ▲▼ buttons to select the desired  
720p  
Lets you output video from the HDMI OUT jack with  
Deep Color. Deep Color provides more accurate  
color reproduction with greater color depth.  
support BD Wise, you can not use the BD Wise function.  
item, and then press the  
button.  
v
480p  
For proper operation of BD Wise, set the BD  
Press the ExIT button to exit the menu.  
Wise menu of both the player and the TV to On.  
9
* If the Source Stream is 2ch, “Re-encoded  
Dolby D” Setting is not applied. Output will  
be PCM 2ch.  
If your TV is not compatible with PCM  
sampling rates over 48kHz, the player may  
output 48kHz downsampled PCM audio  
even though you set PCM Downsampling  
to Off.  
progressive mode  
Lets you improve picture quality when viewing DVDs.  
Blu-ray Discs may include three audio  
streams :  
Audio Settings  
-
-
Main Feature Audio : The audio soundtrack  
of the main feature.  
dynamic Range Control  
digital Output  
You can listen at low volumes, but still hear  
dialog clearly.  
BONUSVIEW audio : An additional  
soundtrack such as the director or actors  
commentary.  
Set the Digital Output to match the capabilities of the AV receiver you’ve connected to the  
player : For more details, please refer to the Digital Output Selection table below.  
This is only active if your player detects a  
Dolby Digital signal.  
-
Navigation Sound Effects : When you  
choose a menu navigation selection, a  
Navigation Sound Effect may sound.  
Navigation Sound Effects are different on  
each Blu-ray Disc.  
digital Output Selection  
downmixing mode  
Bitstream  
(Re-encoded  
DTS)  
Bitstream  
(Re-encoded  
Dolby D)  
Bitstream  
Setup  
PCM  
Select the Downmix method for stereo output.  
(Unprocessed)  
NOTE  
Re-encoded  
PCM  
Up to PCM 7.1ch  
PCM 2ch  
PCM  
Dolby Digital  
Dolby Digital Plus  
Dolby TrueHD  
DTS  
DTS re-encoded  
DTS re-encoded  
DTS re-encoded  
DTS re-encoded  
DTS re-encoded  
Network Settings  
Please contact your ISP to find out if your IP  
address is static or dynamic. If it is dynamic  
- and most are - we recommend using the  
Dolby Digital *  
`
`
Be sure to select the correct Digital Output or  
you will hear no sound or just loud noise.  
Re-encoded  
Dolby Digital  
Dolby Digital Plus  
Dolby TrueHD  
DTS  
Dolby Digital *  
If the HDMI device (AV receiver, TV) is not  
Re-encoded  
PCM 2ch  
compatible with compressed formats (Dolby  
Dolby Digital *  
Audio Stream  
on Blu-ray  
Disc  
Digital, DTS), the audio signal outputs as PCM. Auto procedure for network setup. This is  
Re-encoded  
PCM 2ch  
easiest and will work in the majority of cases.  
Dolby Digital *  
`
`
`
Regular DVDs do not have BONUSVIEW audio  
If it is static, you must use the manual set up  
Re-encoded  
and Navigation Sound Effects.  
PCM 2ch  
procedure. (See page 11.)  
Dolby Digital *  
Some Blu-ray Discs do not have BONUSVIEW  
audio and Navigation Sound Effects.  
Network setup directions start below.  
DTS-HD Hi  
Re-encoded  
PCM 2ch  
DTS-HD Hi Resolution Audio DTS re-encoded  
Resolution Audio  
Dolby Digital *  
NOTE  
DTS-HD Master  
Audio  
Re-encoded  
If you play MPEG audio soundtracks, the audio  
PCM 2ch  
DTS-HD Master Audio  
DTS re-encoded  
`
This unit can only be connected to a Network  
via a wireless connection.  
Dolby Digital *  
signal outputs as PCM regardless of your  
PCM  
Dolby Digital  
DTS  
PCM 2ch  
PCM 2ch  
PCM 2ch  
PCM 2ch  
Dolby Digital  
DTS  
PCM 2ch  
Dolby Digital  
DTS  
PCM 2ch  
Dolby Digital  
DTS  
pCmDdigoitawl Onutspuat mselepctliionnsg(PCM or Bitstream).  
Audio Stream  
on DVD  
Automatic Network Setup  
Decodes the main  
feature audio and  
BONUSVIEW audio  
stream together  
into PCM audio and  
adds Navigation  
Sound Effects, then  
re-encodes the PCM  
audio into Dolby  
Digital bitstream or  
PCM.  
Decodes the main  
feature audio and  
BONUSVIEW audio  
stream together into  
PCM audio and adds  
Navigation Sound  
Effects, then re-  
encodes the PCM  
audio into DTS  
Lets you set 48kHz and 96kHz PCM down-  
sampling on or off.  
1.  
In the Home menu, press the ◄►  
Outputs only the main feature  
buttons to select Settings, and then  
Decodes the main feature audio stream so that your  
audio and BONUSVIEW AV receiver can decode the  
press the  
button.  
v
HdmI  
Definition for  
Blu-ray Disc  
2.  
3.  
Press the ▲▼ buttons to select Network,  
Any  
audio stream together  
audio bitstream.  
If your TV is not compatible with  
and then press the  
button.  
v
into PCM audio and adds You will not hear BONUSVIEW  
Navigation Sound Effects. audio or Navigation Sound  
Effects.  
compressed multi-channel formats (Dolby  
Digital, DTS), the player may output PCM  
2ch downmixed audio even though you  
selected Bitstream (either Re-encoded or  
Unprocessed) in the setup menu.  
Press the ▲▼ buttons to select  
Network Setting, and then press the  
button. The Network Setting screen  
v
bitstream.  
appears.  
10  
Use the arrow keys on your remote  
to move from button to button on the  
Security Key screen.  
10. Wait until the connection confirmation  
message is displayed, and then press  
the v button. The Network Settings  
screen reappears.  
6.  
Enter the Ip Address, Subnet mask,  
Settings  
Displa
and Gateway values.  
Network Setting  
Access Point Selection  
:
:
:
:
:
Not Selected  
Auto  
Audio  
7.  
Press the ▼ to go to dNS.  
Internet Protocol Setup  
\
Netwo
System  
IP Address  
Subnet Mask  
Gateway  
0
0
0
0
0
0
0
0
0
0
0
0
To change the kind of characters  
you are entering, move to the button  
labeled a/A/1/, and then press the  
8.  
Press the ▼ button to go to the first  
DNS entry field. Enter the numbers as  
above.  
Langu
11. To test the connection, press the ▼  
button to select Network Test, and then  
press the v button.  
Securi
DNS  
:
Auto  
Gener
Suppo
DNS Server  
:
0
0
0
0
v
v
button. Each time you press the  
button, you change the kind of  
a
WPS(PBC)  
>
Move  
"
Select  
'
Return  
9.  
When done, press the ▲ button to return  
to Access Point Selection. Select the  
characters you can enter (a/A/1/).  
manual Network Setup  
network, and then press the  
button.  
v
4.  
leAccess point Selectionn
then press the v button.  
You can also change the kind of  
character by pressing the dISC  
mENU button on the remote.  
If the Auto Setting does not work, you need  
to enter the Network settng values manually.  
WpS(pBC) function  
The Network function searches for  
available wireless networks.  
When done, it displays a list of the  
available networks.  
Before you start manual network setup, you  
need the network setting values.  
The easiest way to set up the wireless  
To enter a letter, press the number  
button that corresponds to the  
letter. Pressing the button repeatedly  
changes the letter.  
network connection is using the WPS(PBC)  
function.  
To get the Network setting values, contact  
your ISP or your network administrator.  
If your wireless router has a WPS(PBC)  
button, follow these steps:  
5.  
6.  
In the list of networks, press the ▲▼  
buttons to select a network, and then  
press the v button.  
To Enter the Network settings into your player,  
To enter a number or symbol when  
the Security Key screen is displaying  
numbers or symbols, press the  
follow these steps:  
1.  
In the Network Settings menu, press the  
▲▼ buttons to select Network Setting,  
If the Security Key screen appears, go  
to Step 7. If the Network Connecting  
Screen appears, go to Step 10.  
1.  
2.  
On the Internet Protocol Setup screen,  
and then press the  
button.  
v
press the  
button.  
v
corresponding number button once.  
The Internet Protocol Setup screen  
Press the ▲▼ buttons to select manual,  
To delete the last letter, number, or  
symbol you entered, move to the  
delete button, and then press the  
v button.  
appears.  
and then press the  
button.  
v
7.  
On the Security Key screen, enter your  
2.  
3.  
Press the REd (A) button on the remote  
networks Pass Phrase.  
control.  
Settings  
NOTE  
Network Setting  
Displa
Press the WpS(pBC) button on your  
router within two minutes. Your player  
displays the Network Selection Screen,  
and automatically acquires all the  
Access Point Selection  
Internet Protocol Setup  
:
:
:
:
:
Not Selected  
Manual  
To see and use additional symbols,  
`
You should be able to find the Pass Phrase on  
one of the set up screens you used to set up  
your router or modem.  
Audio  
\
Netwo
System  
press the  
[
or  
]
button when  
IP Address  
Subnet Mask  
Gateway  
0
0
0
0
0
0
255 255 255  
the Security Key screen is displaying  
Langu
Securi
0
0
0
symbols.  
DNS  
:
Manual  
Gener
Suppo
DNS Server  
:
0
0
0
0
network setting values it needs and  
connects to your network. When it is  
done, it displays an OK button. Press  
Settings  
To clear all entered letters, numbers,  
and symbols, move to the Clear  
All button, and then press the v  
button. You can also just press the  
REd (A) button on your remote.  
a
WPS(PBC)  
>
Move  
"
Select  
'
Return  
Security Key  
Display  
Security Key  
(0)  
Audio  
a
b
c
Networ
System  
Langua
Securit
Genera
Suppor
the  
button on your remote.  
v
.,@  
ghi  
abc  
jkl  
def  
mno  
1
4
7
2
5
8
0
3
6
9
4.  
After the network connection is set up,  
press the RETURN button to exit the  
Network Setting screen.  
3.  
4.  
5.  
Press the ▼ button to go to the first  
entry field (IP Address).  
pqrs  
tuv  
wxyz  
a/A/1/  
Delete  
a
Clear All  
b
Space  
Cursor  
c
Done  
9.  
When done, press the yELLOW (C)  
button on your remote, or move to the  
done button, and then press the v  
button.  
Use the number buttons to enter  
(
/
)
"
Select  
'
Return  
numbers.  
NOTE  
`
To comply with the revised Wi-Fi standard  
specifications, WEP encryption of the wireless  
router does not support WPS connections.  
When done with each field, use the ► button  
to move successively to the next field.  
You can also use the other arrow  
8.  
nha, fle
general directions:  
The Network Connecting screen  
appears.  
buttons to move up, down, and back.  
11  
2.  
3.  
Insert a Blu-ray Disc that supports BD-  
LIVE.  
`
`
If your Samsung TV has an Anynet+ logo, then  
it supports the Anynet+ function.  
Network Test  
playing content located in your  
pC on the Blu-ray disc player  
Use this menu item to check whether your  
Depending on your TV, certain HDMI output  
resolutions may not work.  
Select an item from various BD-LIVE  
service contents provided by the disc  
manufacturer.  
nNeetwtworkocroknSnetcatitounsis working or not.  
You can view shared files from your computer  
on your Blu-ray Disc Player.  
Please refer to the user manual of your TV.  
`
`
After the product was turned off, disconnecting and  
connecting the power cable turns it on automatically.  
At the moment, it automatically turns off in about  
15 seconds for re-establishing Anynet+ connection.  
You can get detailed instructions for using  
NOTE  
AllShare from the Samsung.com web site.  
Use to check whether a connection to a  
`
The way you use BD-LIVE and the provided  
contents may differ, depending on the disc  
manufacturer.  
nBedtw-oLrkivaendItnheteInrtnerenettChaovenbneeecnteisotanblished.  
Blu-ray Disc Player  
For some TV products, if connected to this  
product with Anynet+ function, turning the TV on  
may display a warning popup message saying no  
connection was found. Still, Anynet+ connection  
Play back  
PC’s files  
Using the AllShare Function  
Set to allow or prohibit an Internet connection  
when you use the BD-LIVE service.  
AllShare lets you play music, video, and photo  
files located in your PC or NAS on the player.  
Bd dias tparopmerlyaenstaabglisheemd aendnatvailable to use.  
AllShare Connection  
Allow (All) : The Internet connection is  
To use AllShare with your player, you must  
connect the player to your network (See  
pages 10~12).  
allowed for all BD-LIVE contents.  
Allow (Valid Only) : The Internet  
connection is allowed only for BD-LIVE  
contents containing a valid certificate.  
System Settings  
Enables you to manage the downloaded  
contents you accessed through a Blu-ray disc  
that supports the BD-LIVE service and stored  
on a flash drive.  
To use AllShare with your PC, you must install  
AllShare software on your PC.  
Initial Settings  
prohibit : No Internet connection is allowed  
If you have NAS, you can use AllShare without  
any additional software.  
for any BD-LIVE content.  
You can check the devices information  
including the storage size, delete the BD data,  
or change the Flash memory device.  
By using the Initial Settings function, you can  
set the language, Network Settings, etc.  
For more information about the Initial Settings  
function, refer to the Initial Settings section of  
this user manual (page 8).  
NOTE  
To download AllShare software  
`
What is a valid certificate?  
When the player uses BD-LIVE to send the  
disc data and a request to the server to certify  
the disc, the server uses the transmitted data  
to check if the disc is valid and sends the  
certificate back to the player.  
NOTE  
1.  
Go to Samsung.com  
`
In the external memory mode, disc playback  
may be stopped if you disconnect the USB  
device in the middle of playback.  
2.  
Click Support, enter your players  
product number in the field that  
appears, and then click Product.  
Anynet+ (HdmI-CEC)  
Anynet+ is a convenient function that offers  
linked operations with other Samsung players  
that have the Anynet+ feature.  
`
Your player supports the FAT16, FAT32, and  
NTFS file systems. We recommend you use  
USB devices that support USB 2.0 protocol  
with 4 MB/sec or faster read/write speed.  
`
The Internet connection may be restricted  
3.  
On the next screen, click Get downloads  
while you are using BD-LIVE contents.  
under Downloads.  
To operate this function, connect this player to  
an Anynet+ Samsung TV with an HDMI cable.  
With Anynet+ on, you can operate this player  
using a Samsung TV remote control and start  
disc playback simply by pressing the pLAy  
4.  
5.  
Click Software on the next page.  
Using the Bd-LIVE™  
`
`
The Resume Play function may not work after  
Click the icon in the AllShare line under  
Once the player is connected to the network,  
you can enjoy various movie-related service  
contents using a BD-LIVE compliant disc.  
you format the storage device.  
File to start the download.  
The total memory available to BD Data  
Management may differ, depending on the  
conditions.  
(
) button on the TVs remote control.  
For more information, please see the TV user  
1.  
Attach a USB memory stick to the USB  
jack on the back of the player, and  
then check its remaining memory. The  
memory device must have at least 1GB  
of free space to accommodate the BD-  
LIVE services.  
manual.  
NOTE  
`
This function is not available if the HDMI cable  
does not support CEC.  
12  
4.  
The update progress popup will appear.  
When the update is completed, the  
player will turn off automatically.  
Language Settings  
If you forgot your password  
Netflix Lock  
Restrict the use of the Netflix service unless  
You can select the language you prefer for the  
1.  
Remove any discs.  
tVhUe 4ddUigiLt PoINckis entered.  
Home menu, disc menu, etc.  
5.  
Press the pOWER button to turn on the  
2.  
Press and hold the @ button on the  
front panel for 5 seconds or more.  
All settings will revert to the factory settings.  
player.  
NOTE  
NOTE  
`
The selected language will only appear if it is  
supported on the disc.  
Restrict the use of the VUDU service unless  
the 4 digit PIN is entered.  
NOTE  
`
The Update is complete when the player turns  
off after restarting. Press the POWER button to  
turn on the updated player for your use.  
`
When the factory default settings are restored,  
all the user stored BD data will be deleted.  
pandora Lock  
Security Settings  
`
`
Never turn the player off or back on manually  
Restrict the use of the Pandora service unless  
during the update process.  
General Settings  
When you access this function for the first  
time, the PIN screen appears. Enter the  
default PIN - 0000 - using the number  
buttons. To change the PIN, use the Change  
PIN function (page 13). Each time you access  
the Security Settings hereafter, you must  
enter that four digit PIN. If you don’t change  
the PIN, continue using the default PIN.  
tyhoeu4TduigbitePINLoiscekntered.  
Samsung Electronics takes no legal  
responsibility for player malfunction caused by  
an unstable Internet connection or consumer  
negligence during a software upgrade.  
Time Zone  
Restrict the use of the YouTube service unless  
the 4 digit PIN is entered.  
You can specify the time zone that is  
applicable to your area.  
`
If you want to cancel the upgrade while the  
upgrade software is downloading, press the  
Change pIN  
button.  
Support Settings  
v
Change the 4-digit password used to access  
security functions.  
Bd parental Rating  
By USB  
Software Upgrade  
Prevent playback of Blu-ray Discs with specific  
To upgrade by USB, follow these steps:  
To change the PIN, follow these steps:  
adgVedratipngasruennletsaslthRea4tidniggit PIN is entered.  
The Software Upgrade menu allows you to  
upgrade the players software for performance  
improvements or additional services.  
1.  
1.  
Select Change PIN, and then press the  
button. The Enter old PIN screen  
v
2.  
Download the latest USB software  
appears.  
upgrade zip archive to your computer.  
This function works in conjunction with DVDs  
that have been assigned an age rating or  
numeric rating that indicates the maturity level  
of the content. These numbers help you control  
the types of DVDs that your family can watch.  
2.  
Enter the old PIN. If you never changed  
the PIN, enter the default PIN: 0000.  
The Enter new PIN screen appears.  
By Online  
3.  
Unzip the zip archive to your computer.  
You should have a single RUF file with  
the same name as the zip file.  
To upgrade By Online, follow these steps:  
1.  
Select By Online, and then press the  
3.  
4.  
Enter the new PIN in the Enter new PIN  
4.  
5.  
Copy the RUF file to a USB flash drive.  
button. The Connecting to Server  
v
fields.  
message appears.  
Select the rating level you want to set.  
For example, if you select Level 6, discs rated  
above 6 - Level 7 and 8 - will not play.  
Make sure there is no disc in the player,  
and then insert the USB flash drive into  
the USB port of the player.  
Re-enter the new PIN in the Confirm  
new PIN fields. The “PIN is changed  
successfully.” message appears.  
2.  
3.  
A popup message will appear if an  
update is available.  
A larger number indicates more mature content.  
6.  
7.  
In the players menu, go to Settings >  
If you select yes, the player will turn off  
automatically before restarting.  
(Never turn the player on during an  
upgrade.)  
5.  
Press the  
button.  
v
Support > Software Upgrade.  
CinemaNow Lock  
Select By USB.  
Restrict the use of the CinemaNow service  
unless the 4 digit PIN is entered  
13  
NOTE  
NOTE  
`
The update is complete when the player turns  
Media Play  
`
`
`
`
No disc should be in the product when you  
off after restarting. Press the POWER button to  
upgrade the software using the USB Host jack.  
turn on the updated player for your use.  
Insert a Disc  
When the software upgrade is done, check the  
`
`
Never turn the player off or on manually during  
PANDORA  
i
n
t
e
r
n
e
t
r
a
d
i
o
YouTube  
HD Movies  
CinemaNow  
software details in the software Upgrade menu.  
the update process.  
1.  
2.  
3.  
4.  
Press the  
button to open the disc  
8
Do not turn off the player during the software  
upgrade. It may cause the player to malfunction.  
Samsung Electronics takes no legal  
tray.  
responsibility for player malfunction caused by  
an unstable Internet connection or consumer  
negligence during software upgrade.  
Push a disc gently into the disc tray with  
the disc's label facing up.  
Software upgrades using the USB Host jack  
must be performed with a USB flash memory  
stick only.  
No Disc  
123  
DLNA  
Press the  
button to close the disc  
8
123  
a
Change Device  
c
Safely Remove USB  
d
View Devices  
"
Enter  
Contact Samsung  
tray. Playback starts automatically.  
Auto Upgrade Notification  
5.  
6.  
Press the ▲▼ buttons to select USB,  
Provides contact information for assistance  
If playback does not start automatically,  
If you have connected the player to your  
network, and then set Auto Upgrade  
Notification on, the player automatically  
notifies you when a new software version is  
available for the player.  
then press the  
button.  
v
select the Videos option on the Main  
wTeithrmyosuropflaSyeer.rvice Agreement  
screen, and then press the  
button.  
v
Press the ◄► buttons to select Videos,  
Music or Photos, then press the  
v
button. Go to Step 7.  
View the general disclaimer regarding third  
party contents and services.  
Insert a USB Device  
-1  
4 . If you pressed the BLUE (d) button, the  
To set Auto Upgrade Notification on, follow  
-1  
screen below appears. Go to 5 .  
these steps:  
You can play multimedia files located on a  
Reset  
USB storage device.  
1.  
2.  
Select Auto Upgrade Notification, and  
PANDORA  
i
n
t
e
r
n
e
t
r
a
d
i
o
YouTube  
then press the  
button.  
v
HD Movies  
CinemaNow  
1.  
2.  
Move to the Home menu.  
All settings will revert to the factory default  
except for the network settings.  
Use the ▲▼ buttons to select On, and  
In Stop mode, connect the USB storage  
device to the USB port on the back  
panel of the player.  
then press the  
button.  
v
123  
If there is a new software version available,  
the player notifies you with a popup message.  
The message “Do you want to access  
the device?” will be displayed.  
1.  
To upgrade the firmware, select yes  
in the Pop-up. The player turns off  
automatically, then restarts, and begins  
the download. (Never turn on the player  
manually here.)  
123  
d
Home  
"
Enter  
3.  
4.  
Press the ◄► button to select yes,  
then press the  
button.  
v
-1  
5 . Press the ◄► buttons to select USB,  
If you have a disc in the Blu-ray player,  
press the REd (A) or BLUE (d) button.  
If you do not, go to Step 6.  
then press the  
button.  
v
-1  
2.  
3.  
4.  
The update progress popup appears.  
6 . Press the ▲▼ buttons to select Videos,  
When the update is complete, the player  
turns off again automatically.  
Music or Photos, then press the  
v
If you pressed the REd (A) button, go to  
button.  
Step 5.  
Press the pOWER button to turn on the  
If you pressed the BLUE (d) button, go  
7.  
The controls and tools you use to play  
videos, music, and pictures located on  
a USB device are identical to those you  
use to play videos, music, and pictures  
on a disc. (See pages 15~16)  
-1  
player.  
to Step 4 .  
14  
NOTE  
Controlling Music Playback  
Repeat an Audio Cd (Cd-dA)/  
button  
button  
button  
Starts playback.  
Stops playback.  
6
5
7
`
You must remove the USB storage device  
mp3  
You can control the playback of music  
safely (by performing the “Safely Remove USB”  
function) in order to prevent possible damage  
to the USB memory. Press the MENU button to  
move to the Home menu, select the YELLOW  
content located on a DVD, USB, or PC.  
1.  
During Playlist playback, press the  
Pauses playback.  
During playback, press the  
TOOLS button.  
Buttons on the Remote Control  
or  
3
(C) button, and then press the  
button.  
v
button.  
used for music playback  
4
Tools  
Fast Motion  
Play  
TRACK 0
Each time you press the  
or  
3
Repeat Mode  
?
Off  
\
`
`
When Audio-CD (CD-DA), MP3 or JPEG files  
are in stop mode, pressing the FULL SCREEN  
button on the remote will not bring up a full  
screen picture.  
Inform
a
ti  
on  
button, the playback speed  
4
<
Adjust  
>
Move  
'
Return  
TRACK 005  
TRACK 006  
will change.  
03:17  
1
+
00:08 / 05:57  
In pause mode, press the  
4
If you insert a disc when playing a USB storage  
device, the device mode changes to “DVD or  
CD” automatically.  
button.  
03:35  
Slow Motion  
Play  
Each time you press the  
4
"
Pause  
Tools  
'
Return  
CD  
4
5
button, the playback speed will  
change.  
2
2.  
3.  
ess h◄► btos o slcRepeat  
In pause mode, press the  
7
mode.  
Controlling Video Playback  
You can control the playback of video content  
located on a DVD, CD, or USB storage device.  
Depending on the disc, some of the functions  
described in this manual may not be available.  
3
6
Step Motion  
Play  
button.  
Press the  
button.  
v
Each time you press the  
7
NUMBER buttons (Audio CD (CD-DA) only) :  
During Playlist playback, press the desired  
track number.  
button, a new frame appears.  
Songs are played in the order  
Off  
1
in which they were recorded.  
During playback, press the  
or  
1
button.  
2
The selected track is played.  
Skip Motion  
Play  
(
(
) One Song  
) All  
The current song is repeated.  
All songs are repeated.  
Each time you press  
or  
1
2
Buttons on the Remote Control  
Skip : During playback, press the  
the playlist.  
or  
1
2
button, the disc moves to the  
previous or next chapter or file.  
used for Video playback  
button to move to the previous or next file of  
2
3
The random option plays  
(
)
Shuffle Mode  
2
songs in random order.  
Using the disc menu, title menu,  
wq  
button : Stops a track.  
5
popup menu, and title list  
Fast Play (Audio CD (CD-DA) only)  
During playback, press the  
button.  
or  
3
4
1
DISC MENU  
During playback, press this button  
4
button  
to start the disc menu function.  
Each time you press the  
or  
button,  
3
4
TITLE MENU  
During playback, press this button  
to start the title menu function.  
the playback speed will change.  
button  
Pause : Pauses a track.  
5
6
playback related buttons  
qq  
POPUP MENU  
button  
During playback, press this button  
button : Plays the currently selected  
6
track.  
to start the popup menu function.  
The player does not play sound in Search,  
Slow or Step mode.  
To return to normal speed playback, press  
the  
button.  
6
15  
Playing Photo Contents  
playlist  
Appendix  
You can play photo contents located on a  
1.  
To move to the Music List, press the  
5
DVD, CD, or a USB storage device.  
or RETURN button.  
Troubleshooting  
The Music List screen appears.  
Using the Tools menu  
Before requesting service, please try the following solutions.  
1/2 Page  
Music  
TRACK 001  
During playback, press the TOOLS button.  
TRACK 001  
TRACK 001  
02:38  
02:38  
PROBLEM  
No operation can be  
performed with the remote  
control.  
SOLUTION  
TRACK 001  
TRACK 001  
02:38  
Slide Show  
Select to start the slide show.  
02:38  
TRACK 001  
02:38  
TRACK 001  
Check the batteries in the remote control. They may need replacing.  
02:38  
Background  
Select to listen to music while  
TRACK 001  
TRACK 001  
02:38  
02:38  
Operate the remote control at a distance of no more than 20 feet.  
Music  
Zoom  
viewing a slide show.  
TRACK 001  
02:38  
TRACK 001  
02:38  
Remove batteries and hold down one or more buttons for several minutes  
to drain the microprocessor inside the remote control to reset it. Reinstall  
batteries and try to operate the remote control again.  
Select to enlarge the current  
picture. (Enlarge up to 4 times)  
c
Select  
(
)
Jump Page  
'
Return  
CD  
Select to rotate the picture. (This  
2.  
3.  
Disc does not play.  
Ensure that the disc is installed with the label side facing up.  
Check the region number of the Blu-ray Disc/DVD.  
Rotate  
will rotate the picture either  
to a desired track, and then press the  
yELLOW (C) button. A check appears  
on the track.  
clockwise or counter clockwise.)  
Information  
Shows the picture information.  
Repeat this procedure to select  
additional tracks.  
Disc Menu does not appear.  
Ensure that the disc has disc menus.  
NOTE  
The prohibition message  
appears on the screen.  
This message appears when an invalid button is pressed.  
To remove a track from the list, move to  
the track, and then press the yELLOW  
(C) button again.  
`
`
Depending on the disc or storage device, the  
Tools menu may differ.  
The Blu-ray Disc/DVD’s software doesn’t support the feature (e.g., angles).  
You’ve requested a title or chapter number or search time that is out of range.  
To enable the background music function, the  
photo file must be in the same storage media  
as the music file.  
The check on the track is cancelled.  
4.  
5.  
When done, press the  
button.  
v
Play mode differs from the  
Setup Menu selection.  
Some of the functions selected in the Setup Menu may not work properly if  
the disc is not encoded with the corresponding function.  
However, the sound quality can be affected  
by the bit rate of the MP3 file, the size of the  
photo, and the encoding method.  
To go to the Music List, press the  
RETURN button.  
The screen ratio cannot be  
changed.  
The Screen Ratio is fixed on your Blu-ray Disc/DVD.  
This is not a problem with the player.  
NOTE  
`
You can't enlarge the subtitle and PG graphic  
`
You can create a playlist with up to 99 tracks  
on Audio CDs (CD-DA).  
in the full screen mode.  
No audio.  
Make sure you have selected the correct Digital Output in the Audio Options  
Menu.  
The screen is blank.  
If the HDMI output is set to a resolution your TV cannot support (for example,  
1080p), you may not see a picture on your TV.  
Press the @ button (on front panel) for more than 5 seconds with no disc  
inside. All settings will revert to the factory settings.  
When the factory default settings are restored, all stored user BD data is  
deleted.  
16  
PROBLEM  
Forgot password  
SOLUTION  
PROBLEM  
BD-LIVE  
SOLUTION  
Press the @ button (on front panel) for more than 5 seconds with no disc  
inside. All settings including the password will revert to the factory settings.  
Don’t use this unless absolutely necessary.  
I cannot connect to the BD-  
Check whether the network connection is working or not by using the  
Network Status menu.  
LIVE server.  
When the factory default settings are restored, all stored user BD data is  
deleted.  
Check whether the USB memory device is connected to the player.  
The memory device must have at least 1GB of free space to accommodate  
the BD-LIVE service.  
If you experience other  
problems.  
Go to the contents and find the section of the user manual that contains the  
explanations regarding the current problem, and follow the procedure once  
again.  
You can check the available size in BD Data Management.  
Check whether the BD-LIVE Internet Connection menu is set to Allow(All).  
If all above fails, contact the contents provider or update the player to the  
latest firmware.  
If the problem still cannot be solved, please contact your nearest Samsung  
authorized service center.  
When using the BD-LIVE  
service, an error occurs.  
The memory device must have at least 1GB of free space to accommodate  
the BD-LIVE service.  
The picture is noisy or  
distorted  
Make sure that the disc is not dirty or scratched.  
Clean the disc.  
You can check the available size in BD Data Management.  
No HDMI output.  
Check the connection between the TV and the HDMI jack of the player.  
NOTE  
Check if your TV supports 480p, 720p, 1080i, or 1080p HDMI input  
resolutions.  
`
When the factory default settings are restored, all stored user BD data is deleted.  
Repairs  
Abnormal HDMI output  
screen.  
If random noise appears on the screen, it means that TV does not support  
HDCP (High-bandwidth Digital Content Protection).  
If you contact us to repair your player, an administration fee may be charged if either:  
AllShare function  
I can see folders shared  
through AllShare, but I cannot  
see the files.  
1.  
An engineer is called out to your home at your request and there is no defect in the  
product.  
AllShares shows only files corresponding to the Image, Music, and Movie  
categories. Files that do not correspond to these categories are not displayed.  
2.  
You bring the unit to a repair center and there is no defect in the product.  
We will provide you with the amount of the administration fee before we make a home visit or  
begin any work on your player.  
Video is played intermittently.  
Check if the network is stable.  
We recommend you read this manually thoroughly, search for a solution on line at www.  
samsung.com, or contact Samsung Customer Care at 1-800-SAMSUNG (726-7864) before  
seeking to repair your player.  
Check if the network cable is properly connected and if the network is not  
overloaded.  
AllShare connection between  
Player and PC is unstable.  
The IP address under the same subnetwork should be unique. If they are not,  
IP interference can cause this phenomenon.  
Check if you have a firewall enabled.  
If so, disable the firewall function.  
17  
Specifications  
Compliance and Compatibility Notice  
NOT ALL discs are compatible  
Power Requirements  
Power Consumption  
Weight  
AC 120V, 60Hz  
10.5W  
2.2 Ibs  
Subject to the restrictions described below and those noted throughout this Manual,  
including the Disc Type and Characteristics section of this user manual, disc types that can  
be played are: pre-recorded commercial BD-ROM, DVD-VIDEO, and Audio CD (CD-DA)  
discs; BD-RE/-R, DVD-RW/-R discs; and CD-RW/-R discs.  
General  
USB  
Discs other than those listed above cannot be and are not intended to be played by this  
player. Some of the discs listed above may not play due to one or more reasons provided  
below.  
Dimensions  
10.6 (W) X 7.6 (D) X 1.6 (H) inches  
+41°F to +95°F  
10 % to 75 %  
USB 2.0  
Operating Temperature Range  
Operating Humidity Range  
Type A  
Samsung cannot assure that this player will play every disc bearing the BD-ROM, BD-RE/-R,  
DVD-VIDEO, DVD-RW/-R, DVD+RW/+R and CD-RW/-R logos, and this player may not  
respond to all operating commands or operate all features of every disc. These and other  
disc compatibility and player operation issues with new and existing format discs are  
possible because:  
DC output  
Video  
Audio  
Wireless LAN  
5V 500mA Max.  
1080p, 1080i, 720p, 480p  
PCM, Bitstream  
Bulit-in  
-
Blu-ray is a new and evolving format and this player may not operate all features of Blu-  
ray Discs because some features may be optional, additional features may have been  
added to the Blu-ray Disc format after the production of this player, and certain available  
features may be subject to delayed availability;  
HDMI  
Network  
-
-
-
-
Network speeds equal to or below 10Mbps are not supported.  
Design and specifications are subject to change without prior notice.  
Weight and dimensions are approximate.  
-
-
not all new and existing disc format versions are supported by this player;  
new and existing disc formats may be revised, changed, updated, improved and/or  
supplemented;  
-
-
some discs are produced in a manner that allows specific or limited operation or restricts  
features during playback;  
Dispose unwanted electronics through an approved recycler.  
or call, (877) 278 - 0799  
some discs bearing the BD-ROM, BD-RE/-R, DVD-VIDEO, DVD-RW/-R, DVD+RW/+R  
and CD-RW/-R logos may still be non-standardized discs;  
-
-
some discs may not be played depending on their physical state or recording conditions;  
problems and errors can occur during the creation of Blu-ray Disc or DVD software and/or  
the manufacture of discs;  
-
-
this player operates differently than a standard DVD player or other AV equipment; and/or  
for reasons noted throughout this user manual and for other reason(s) discovered and  
posted by SAMSUNG customer care center.  
If you encounter disc compatibility or player operation problems, please contact SAMSUNG  
customer care center.  
You may also contact SAMSUNG customer care center for possible updates on this player.  
For additional information on playback restrictions and disc compatibility, refer to the  
Precautions, Before Reading the user manual, Disc Types and Characteristics, and Before  
Playing sections of this user manual.  
18  
For Blu-ray disc player progressive scan output : CONSUMERS SHOULD NOTE THAT  
NOT ALL HIGH DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS  
product AND MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE OF  
PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS RECOMMENDED THAT THE USER  
SWITCH THE CONNECTION TO THE ‘STANDARD DEFINITION’ OUTPUT. IF THERE ARE  
QUESTIONS REGARDING OUR TV SET COMPATIBILITY WITH THIS product, PLEASE  
CONTACT OUR CUSTOMER SERVICE CENTER.  
Network Service disclaimer  
All content and services accessible through this device belong to third parties and are  
protected by copyright, patent, trademark and/or other intellectual property laws. Such  
content and services are provided solely for your personal noncommercial use. You may not  
use any content or services in a manner that has not been authorized by the content owner or  
service provider. Without limiting the foregoing, unless expressly authorized by the applicable  
content owner or service provider, you may not modify, copy, republish, upload, post, transmit,  
translate, sell, create derivative works, exploit, or distribute in any manner or medium any  
content or services displayed through this device.  
Copy protection  
Because AACS (Advanced Access Content System) is approved as the content protection  
system for the Blu-ray Disc format, similar to use of CSS (Content Scramble System) for  
the DVD format, certain restrictions are imposed on playback, analog signal output, etc., of  
AACS protected contents.  
THIRD PARTY CONTENT AND SERVICES ARE PROVIDED “AS IS.” SAMSUNG DOES NOT  
WARRANT CONTENT OR SERVICES SO PROVIDED, EITHER EXPRESSLY OR IMPLIEDLY,  
FOR ANY PURPOSE. SAMSUNG EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTIES,  
INCLUDING BUT NOT LIMITED TO, WARRANTIES OF MERCHANTABILITY OR FITNESS FOR  
A PARTICULAR PURPOSE. SAMSUNG DOES NOT GUARANTEE THE ACCURACY, VALIDITY,  
TIMELINESS, LEGALITY, OR COMPLETENESS OF ANY CONTENT OR SERVICE MADE  
AVAILABLE THROUGH THIS DEVICE AND UNDER NO CIRCUMSTANCES, INCLUDING  
NEGLIGENCE, SHALL SAMSUNG BE LIABLE, WHETHER IN CONTRACT OR TORT,  
FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES,  
ATTORNEY FEES, EXPENSES, OR ANY OTHER DAMAGES ARISING OUT OF, OR IN  
CONNECTION WITH, ANY INFORMATION CONTAINED IN, OR AS A RESULT OF THE USE  
OF ANY CONTENT OR SERVICE BY YOU OR ANY THIRD PARTY, EVEN IF ADVISED OF THE  
POSSIBILITY OF SUCH DAMAGES.  
The operation of this product and restrictions on this product may vary depending on your  
time of purchase as those restrictions may be adopted and/or changed by AACS after the  
production of this product. Furthermore, BD-ROM Mark and BD+ are additionally used as  
content protection systems for the Blu-ray Disc format, which imposes certain restrictions  
including playback restrictions for BD-ROM Mark and/or BD+ protected contents. To obtain  
additional information on AACS, BD-ROM Mark, BD+, or this product, please contact  
SAMSUNG customer care center.  
Many Blu-ray Disc/DVDs are encoded with copy protection. Because of this, you should  
only connect your Player directly to your TV, not to a VCR. Connecting to a VCR results in a  
distorted picture from copy-protected Blu-ray Disc/DVDs.  
Third party services may be terminated or interrupted at any time, and Samsung makes no  
representation or warranty that any content or service will remain available for any period  
of time. Content and services are transmitted by third parties by means of networks and  
transmission facilities over which Samsung has no control. Without limiting the generality of  
this disclaimer, Samsung expressly disclaims any responsibility or liability for any interruption or  
suspension of any content or service made available through this device.  
Under the U.S. Copyright laws and Copyright laws of other countries, unauthorized  
recording, use, display, distribution, or revision of television programs, videotapes, Blu-ray  
Discs, DVDs, and other materials may subject you to civil and/or criminal liability.  
Cinavia Notice : This product uses Cinavia technology to limit the use of unauthorized  
copies of some commercially-produced film and videos and their soundtracks. When  
a prohibitet use of an unauthorized copy is detected, a message will be displayed and  
playback or copying will be interrupted. More information about Cinavia technology is  
To request additional information about Cinavia by email, send a postcard with your mailing  
address to: Cinavia Consumer Information Center, P.O. Box 86851, San Diego CA, 92138,  
USA.  
Samsung is neither responsible nor liable for customer service related to the content and  
services. Any question or request for service relating to the content or services should be made  
directly to the respective content and service providers.  
This product incorporates proprietary technology under licence from Verance Corporation  
and is protected by U.S. Patent 7,369,677 and other U.S. and worldwide patens issued  
and pending as well as copyright and trade secret protection for certain aspects of such  
technology. Cinavia is a trademark of Verance Corporation. Copyright 2004-2010 Verance  
Corporation. All right reserved by Verance. Reverse engineering or disassembly is prohibited.  
19  
License  
LImITEd WARRANTy TO ORIGINAL pURCHASER  
Manufactured under license from Dolby Laboratories. Dolby and the  
This SAMSUNG brand product, as supplied and this product or result in service problems; incorrect  
distributed by SAMSUNG and delivered new, in the electrical line voltage, fluctuations and surges;  
original carton to the original consumer purchaser, customer adjustments and failure to follow operating  
is warranted by SAMSUNG against manufacturing instructions, cleaning, maintenance and environmental  
defects in materials and workmanship for a limited instructions that are covered and prescribed in the  
double-D symbol are trademarks of Dolby Laboratories.  
warranty period of:  
instruction book; product removal or reinstallation;  
reception problems and distortion related to noise,  
echo, interference or other signal transmission and  
delivery problems. SAMSUNG does not warrant  
uninterrupted or error-free operation of the product.  
Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380;  
6,487,535 & other U.S. and worldwide patents issued & pending. DTS, the  
Symbol & DTS and the Symbol together are registered trademarks & DTS  
2.0+Digital Out is a trademark of DTS, Inc. Product includes software. © DTS, Inc. All Rights  
Reserved.  
One (1) year parts and Labor*  
(*90 days parts and Labor for Commercial Use)  
This limited warranty begins on the original date of  
purchase, and is valid only on products purchased and  
used in the United States. To receive warranty service,  
the purchaser must contact SAMSUNG for problem  
determination and service procedures. Warranty  
service can only be performed by a SAMSUNG  
authorized service center. The original dated bill of sale  
must be presented upon request as proof of purchase  
to SAMSUNG or SAMSUNG's authorized service  
center. Transportation of the product to and from the  
service center is the responsibility of the purchaser.  
THERE ARE NO EXPRESS WARRANTIES OTHER  
THAN THOSE LISTED AND DESCRIBED ABOVE, AND  
NO WARRANTIES WHETHER EXPRESS OR IMPLIED,  
INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED  
WARRANTIES OF MERCHANTABILITY OR FITNESS  
FOR A PARTICULAR PURPOSE, SHALL APPLY AFTER  
THE EXPRESS WARRANTY PERIODS STATED ABOVE,  
AND NO OTHER EXPRESS WARRANTY OR GUARANTY  
GIVEN BY ANY PERSON, FIRM OR CORPORATION  
WITH RESPECT TO THIS PRODUCT SHALL BE BINDING  
ON SAMSUNG. SAMSUNG SHALL NOT BE LIABLE  
FOR LOSS OF REVENUE OR PROFITS, FAILURE TO  
REALIZE SAVINGS OR OTHER BENEFITS, OR ANY  
OTHER SPECIAL, INCIDENTAL OR CONSEQUENTIAL  
DAMAGES CAUSED BY THE USE, MISUSE OR INABILITY  
TO USE THIS PRODUCT, REGARDLESS OF THE LEGAL  
THEORY ON WHICH THE CLAIM IS BASED, AND EVEN  
IF SAMSUNG HAS BEEN ADVISED OF THE POSSIBILITY  
OF SUCH DAMAGES. NOR SHALL RECOVERY OF ANY  
KIND AGAINST SAMSUNG BE GREATER IN AMOUNT  
THAN THE PURCHASE PRICE OF THE PRODUCT SOLD  
BY SAMSUNG AND CAUSING THE ALLEGED DAMAGE.  
WITHOUT LIMITING THE FOREGOING, PURCHASER  
ASSUMES ALL RISK AND LIABILITY FOR LOSS, DAMAGE  
OR INJURY TO PURCHASER AND PURCHASER’S  
PROPERTY AND TO OTHERS AND THEIR PROPERTY  
ARISING OUT OF THE USE, MISUSE OR INABILITY TO  
USE THIS PRODUCT SOLD BY SAMSUNG NOT CAUSED  
DIRECTLY BY THE NEGLIGENCE OF SAMSUNG. THIS  
LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE  
OTHER THAN THE ORIGINAL PURCHASER OF THIS  
PRODUCT, IS NONTRANSFERABLE AND STATES YOUR  
EXCLUSIVE REMEDY.  
The terms HDMI and HDMI High-Definition Multimedia Interface, and  
the HDMI Logo are trademarks or registered trademarks of HDMI  
Licensing LLC in the United States and other countries.  
Oracle and Java are registered trademarks of Oracle and/or its affiliates.  
Other names may be trademarks of their respective owners  
SAMSUNG will repair or replace this product, at  
our option and at no charge as stipulated herein,  
with new or reconditioned parts or products if  
found to be defective during the limited warranty  
period specified above. All replaced parts and  
products become the property of SAMSUNG and  
must be returned to SAMSUNG. Replacement  
parts and products assume the remaining original  
warranty, or ninety (90) days, whichever is longer.  
SAMSUNGs obligations with respect to software  
products distributed by SAMSUNG under the SAMSUNG  
brand name are set forth in the applicable end user  
license agreement. Non-SAMSUNG hardware and  
software products, if provided, are on an “AS IS” basis.  
Non-SAMSUNG manufacturers, suppliers, publishers,  
and service providers may provide their own warranties.  
This limited warranty covers manufacturing defects  
in materials and workmanship encountered in  
normal, and except to the extent otherwise expressly  
provided for in this statement, noncommercial use  
of this product, and shall not apply to the following,  
including, but not limited to: damage which occurs in  
shipment; delivery and installation; applications and  
uses for which this product was not intended; altered  
product or serial numbers; cosmetic damage or  
exterior finish; accidents, abuse, neglect, fire, water,  
lightning or other acts of nature; use of products,  
equipment, systems, utilities, services, parts,  
Open Source License Notice  
-
In the case of using open source software, Open Source Licenses are available on the  
product menu.  
Blu-ray Disc™, Blu-ray™ and the logos are trademarks of the Blu-ray Disc Association.  
Some states do not allow limitations on how long an  
implied warranty lasts, or the exclusion or limitation of  
incidental or consequential damages, so the above  
limitations or exclusions may not apply to you. This  
warranty gives you specific legal rights, and you may  
also have other rights which vary from state to state.  
supplies, accessories, applications, installations,  
repairs, external wiring or connectors not supplied  
and authorized by SAMSUNG, or which damage  
To obtain warranty service, please contact  
SAMSUNG customer care center.  
20  
QUESTIONS OR COMMENTS?  
COUNTRy  
CALL  
OR VISIT US ONLINE AT  
WRITE  
Samsung Electronics America, Inc.  
85 Challenger Road Ridgefield Park,  
NJ 07660-2112  
1-800-SAMSUNG  
IN THE US  
(726-7864)  
AK68-02273A-01  

Vizio Car Speaker VSB200 User Manual
Tiffen Domke F 804 User Manual
Sony HVR A1N User Manual
Sony DT 55 200MM F4 5.6 SAM User Manual
Sony CINEALTA PDW F330K User Manual
Sony CCD TRV438E User Manual
Sony CCD TRV428E User Manual
Samsung W70U User Manual
Samsung SMX F53SP User Manual
Samsung HMX U100UN User Manual