Samsung Bd F5100 Blu Ray Disc Player BDF5100ZA User Manual

BD-F5100

™

Blu-ray Disc Player

user manual

imagine the possibilities

Thank you for purchasing this Samsung product.

To receive more complete service,

please register your product at

www.samsung.com/register

ENGLISH

12. Use only with the cart,

stand, tripod, bracket,

• Disc Storage

` Do not keep in direct sunlight.

Contents

or table specified by

` Keep in a cool ventilated area.

the manufacturer,

` Keep in a clean protection jacket and

SAFETy INFORmATION

Language Settings.....................................13

Security Settings........................................13

General Settings........................................13

Support Settings .......................................13

or sold with the

store vertically.

Warning.......................................................2

Precautions .................................................2

Disc Storage & Management.......................3

Handling Cautions .......................................3

apparatus. When

a cart is used, use

Handling Cautions

caution when moving the cart/apparatus

combination to avoid injury from tip-over.

• Do not expose this apparatus to dripping

or splashing. Do not put objects filled with

liquids, such as vases on the apparatus.

mEdIA pLAy

13. Unplug this apparatus during lightning

storms or when unused for long periods

of time.

Playing a Commercially Recorded Disc......14

Playing Files on a USB Device ...................14

Playing a Disc with User Recorded Content15

Playing Content Located in Your PC..........15

Controlling Video Playback ........................15

Controlling Music Playback........................16

Playing Photo Contents.............................17

Using Netflix ..............................................17

Using Pandora...........................................18

Using You Tube .........................................18

• To turn this apparatus off completely, you

must pull the power plug out of the wall

socket. Consequently, the power plug must

be easily and readily accessible at all times.

GETTING STARTEd

14. Refer all servicing to qualified service

personnel. Servicing is required when

the apparatus has been damaged in any

way, such as when the power-supply

cord or plug is damaged, liquid has

been spilled or objects have fallen into

the apparatus, the apparatus has been

exposed to rain or moisture, does not

operate normally, or has been dropped.

Before using the User Manual......................4

Logos of Discs the player can play ..............4

Accessories.................................................6

Front Panel..................................................6

Rear Panel...................................................6

Remote Control...........................................7

• Do not plug multiple electric devices into

the same wall socket. Overloading a socket

can cause it to overheat, resulting in a fire.

• Before connecting other components to

this player, be sure to turn them off.

•

If you move your player suddenly from a cold

place to a warm place, condensation may

occur on the operating parts and lens and

cause abnormal disc playback. If this occurs,

unplug the player, wait for two hours, and

then connect the plug to the power outlet.

Then, insert the disc, and try to play back

again.

CONNECTIONS

Connecting to a TV......................................7

Connecting to an Audio System ..................8

Connecting to a Network Router .................8

Disc Storage & Management

• Holding Discs

AppENdIx

Troubleshooting.........................................20

Fingerprints or scratches

on a disc may reduce

sound and picture quality

or cause skipping

Specifications............................................21

SETTINGS

• If the product makes an abnormal noise

or produces a burning smell or smoke,

turn off the power switch immediately and

disconnect the power plug from the wall

outlet. Then, contact the nearest customer

service center for technical assistance. Do

not use the product. Using the product as

it is may cause a fire or an electric shock.

The Initial Settings Procedure.......................9

Menu Navigation..........................................9

Accessing the Settings Menu ......................9

Display Settings...........................................9

Audio Settings...........................................10

Network Settings.......................................11

System Settings ........................................12

Avoid touching the surface of a disc

where data has been recorded.

Hold the disc by the edges so that

fingerprints will not get on the surface.

Do not stick paper or tape on the disc.

• Cleaning Discs

If you get fingerprints or dirt

on a disc, clean it with a mild

detergent diluted in water

and wipe with a soft cloth.

user's manual may be reproduced or copied

without the prior written permission of

Samsung Electronics Co.,Ltd.

When cleaning, wipe gently

from the inside to the outside of the disc.

Region Code

Supported File Formats

Getting Started

Both players and discs are coded by region.

These regional codes must match for a disc

to play. If the codes do not match, the disc

will not play.

Notes on the USB connection

Before using the User Manual

• Your player supports USB storage media,

MP3 players, digital cameras, and USB

card readers.

The Region Code for this player is displayed

on the rear panel of the player.

disc Types and Contents your player can play

• The player does not support folder or file

names longer than 128 characters.

Media

Disc Type

Details

Region

Disc Type

Area

•

Some USB/External HDD/digital camera

Code

Blu-ray Disc

BD-ROM or BD-RE/-R recorded in the BD-RE format.

devices may not be compatible with the player.

North America, Central

DVD-VIDEO

DVD-RW

DVD-R

• Your player supports the FAT16, FAT32,

Blu-ray

Disc

America, South America,

Korea, Japan, Taiwan, Hong

Kong and South East Asia.

DVD-VIDEO, recorded DVD+RW/DVD-RW(V)/DVD-R/+R that have

been recorded and finalized, or a USB storage media containing MKV

or MP4 contents.

and NTFS file systems.

VIDEO

•

Connect USB devices directly to the player’s

USB port. Connecting through a USB cable

may cause compatibility problems.

DVD+RW

DVD+R

DVD-

The U.S., U.S. territories and

• Inserting more than one memory device

into a multi-card reader may cause the

reader to operate improperly.

CD-RW/-R,

DVD-RW/-R,

BD-RE/-R

VIDEO

Canada

Music recorded on CD-RW/-R, DVD-RW/-R, BD-RE/-R or a USB

storage media containing MP3 or WMA contents.

MUSIC

•

The player does not support the PTP protocol.

Logos of Discs the player can play

CD-RW/-R,

DVD-RW/-R,

BD-RE/-R

Photos recorded on CD-RW/-R, DVD-RW/-R, BD-RE/-R or a USB

storage media containing JPEG contents.

• Do not disconnect a USB device during a

PHOTO

"loading" process.

• The bigger the image resolution, the longer

the image takes to display.

NOTES

✎

• This player cannot play MP3 files with DRM

(Digital Rights Management) downloaded

from commercial sites.

The player may not play certain CD-RW/-R and DVD-R because of the disc type or recording conditions.

If a DVD-RW/-R has not been recorded properly in DVD video format, it will not be playable.

Your player will not play content that has been recorded on a DVD-R at a bit-rate that exceeds 10 Mbps.

Blu-ray Disc

BD-LIVE

•

Your player only supports video with a

frame rate under 30fps (frames per second).

Your player will not play content that has been recorded on a BD-R or USB device at a bitrate that exceeds

• Your player only supports USB Mass

Storage Class (MSC) devices such as

thumb drives and USB HDD. (HUB is not

supported.)

25 Mbps.

NTSC broadcast system in U.S.A, Canada, Korea, Japan

Playback may not work for some types of discs, or when you use specific functions, such as angle change

and aspect ratio adjustment. Information about the discs is written in detail on the disc box. Please refer to

this if necessary.

• Certain USB HDD Devices, multi-card

readers and thumb drives may not be

compatible with this player.

When you play a BD-J title, loading may take longer than a normal title or some functions may perform slowly.

disc types your player cannot play

• If some USB devices require excessive

power, they may be limited by the circuit

safety device.

• HD DVD

• DVD-RAM

• DVD-RW (VR mode) • 3.9 GB DVD-R for

Authoring.

• DVD-ROM/PD/

• Super Audio CD

• CVD/CD-ROM/

CDV/CD-G/CD-I/LD

(CD-Gs play audio

only, not graphics.)

MV, etc

(except CD layer)

• If playback from a USB HDD is unstable, provide additional power by plugging the HDD into

a wall socket.

• Video decoder

- Supports up to H.264 Level 4.1 and AVCHD

- Does not support H.264 FMO/ASO/RS and VC1 SP/MP/AP L4

If the problem continues, contact the USB HDD manufacturer.

• You must remove the USB storage device safely by performing the "Safely Remove USB"

function to prevent possible damage to the USB memory.

- MPEG4 SP, ASP :

Below 1280 x 720 : 60 frames max

Above 1280 x 720 : 30 frames max

Press the HOmE button to move to the home screen, press the yELLOW (C) button, and

then press the v button.

- Does not support GMC 2 or higher

• SAMSUNG is not responsible for any data file damage or data loss.

• Audio decoder

• Your player does not support NTFS compressed files, sparse files, or encrypted files.

• You can repair or format a USB device on your Desktop PC. (MS-Windows OS only)

- Supports WMA 7, 8, 9 and STD

- Does not support WMA sampling rate of 22050Hz mono.

- AAC: Max sampling rate: 96Khz (8, 11, 12, 16, 22,24, 32,44.1, 48, 64, 88.2, 96)

Video File Support

Max bitrate: 320kbps

File Extension

Container

Video Codec

MP4v3

Audio Codec

Resolution

1920x1080

Music File Support

MP3

Dolby Digital

DTS

File Extension

Container

Audio Codec

Support Range

*.avi

AVI

*.mp3

MP3

WMA

1920x1080

H.264 BP/MP/HP

PCM

* Sampling rates (in kHz) - 8, 11, 16, 22, 32, 44.1, 48

*.wma

WMA

* Bit rates - All bit-rates from 5kbps to 355kbps

MP3

Dolby Digital

DTS

WMA

1920x1080

VC-1 AP

*.mkv

MKV

H.264 BP/MP/HP

Picture File Support

1920x1080

VC-1 AP

*.wmv

*.mp4

WMV (wmv9)

MP4

File Extension

Type

Resolution

15360x8640

VC-1 SM

*.jpg

*.jpeg

*.jpe

MP4 (mp4v)

H.264 BP/MP/HP

MPEG1

AAC

MP1, 2

Dolby Digital

DTS

JPEG

PNG

*.mpg

MPEG2

*.png

*.mpeg

H.264 BP/MP/HP

• Limitations

- Even when a file is encoded by a supported codec listed above, the file might not be

played if its content has a problem.

- Normal playback is not guaranteed if the file’s container information is wrong or the file

itself is corrupted.

- Files having a higher Bit rate/frame rate than standard may stutter during sound/video playback.

- The Seek (skip) function is not available if the file’s index table is damaged.

AVCHd (Advanced Video Codec High definition)

Front Panel

• This player can play back AVCHD format discs. These discs are normally recorded and used

PLAY/PAUSE BUTTON

in camcorders.

• The AVCHD format is a high definition digital video camera format.

STOP BUTTON

• The MPEG-4 AVC/H.264 format compresses images with greater efficiency than the

conventional image compressing format.

OPEN/CLOSE BUTTON

POWER BUTTON

• Some AVCHD discs use the "x.v.Color" format. This player can play back AVCHD discs that

use "x.v.Color" format.

• "x.v.Color" is a trademark of Sony Corporation.

• "AVCHD" and the AVCHD logo are trademarks of Matsushita Electronic Industrial Co., Ltd.

and Sony Corporation.

NOTES

✎

Some AVCHD format discs may not play, depending on the recording condition.

AVCHD format discs need to be finalized.

"x.v.Color" offers a wider color range than normal DVD camcorder discs.

Some MKV and MP4 format discs may not play, depending on the video resolution and frame rate condition.

USB HOST

REMOTE CONTROL SENSOR

Accessories

Check for the supplied accessories shown below.

DISC TRAY

NOTES

✎

When the player displays the Blu-ray Disc menu, you cannot start the movie by pressing the Play button

on the player or the remote. To play the movie, you must select Play Movie or Start in the disc menu, and

then press the

button.

You can perform software upgrades using the USB Host jack with a USB flash memory stick only.

REPEAT

FULL

VIEW

A-B

SCREEN

Rear Panel

Batteries for Remote Control

(AAA Size) (4301-000121)

User Manual

(AK68-02285A)

Remote Control

(AK59-00149A)

HDMI OUT

LAN

DIGITAL AUDIO OUT

Remote Control

Connections

Tour of the Remote Control

Connecting to a TV

Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back of the product to

the HDMI IN jack on your TV.

Turn the player on and off.

Turn the TV on and off.

Do not connect the power cord to the wall outlet until you have made all the other

connections.

After setup, allows you to set the input

source on your TV.

TV volume adjustment.

Press to open and close the disc tray.

When you change the connections, turn off all devices before you start.

Press the number buttons to operate options.

Use to enter the disc menu.

Use to enter the popup menu/title menu.

Press to skip backwards or forwards.

Press to search a disc backwards or

forwards.

Audio

Video

Press to stop a disc.

Press to play a disc.

Press to pause a disc.

Press to move to the Home menu.

Press to switch the Blu-ray Disc/DVD’s

Use to access various audio functions on a

subtitle language.

disc (Blu-ray Disc/DVD).

Press to use the Tools menu.

Use to display the playback information

when playing a Blu-ray Disc/DVDs.

Use to select menu items and change menu

values.

Press to exit the menu.

Return to the previous menu.

NOTES

✎

These buttons are used both for menus on the

player and also several Blu-ray Disc functions.

Press to see the full screen on a TV.

During the Blu-ray Disc/DVDs playback, Full

Screen button does not operate.

If you use an HDMI-to-DVI cable to connect to your display device, you must also connect the Digital Audio

Out on the player to an audio system to hear audio.

BONUS REPEAT REPEAT

FULL

SCREEN

VIEW

A-B

Press to use bonusview function.

Allows you to repeat A-B disc.

Allows you to repeat a title, chapter, track or

An HDMI cable outputs digital video and audio, so you don't need to connect an audio cable.

disc.

Depending on your TV, certain HDMI output resolutions may not work. Please refer to the user manual of

your TV.

When you connect the player to your TV using the HDMI cable or to a new TV, and then turn it on for the

first time, the player automatically sets the HDMI output resolution to the highest supported by the TV.

NOTES

✎

Installing batteries

If the remote does not operate properly:

A long HDMI cable may cause screen noise. If this occurs, set HDMI Deep Color to Off in the menu.

•

Check the polarity (+/–) of the batteries.

Check if the batteries are drained.

Check if the remote sensor is blocked by

obstacles.

To view video in the HDMI 720p, 1080i, or 1080p output mode, you must use a High speed (category 2)

HDMI cable.

HDMI outputs only a pure digital signal to the TV.

•

Check if there is any fluorescent lighting nearby.

If your TV does not support HDCP (High-bandwidth Digital Content Protection), random noise appears on

the screen.

CAUTION

Dispose of batteries according to local environmental

regulations. Do not put them in the household trash.

Connecting to an Audio System

Connecting to a Network Router

You can connect the Blu-ray player to an audio system using one of the methods illustrated

You can connect your player to your network router using one of the methods illustrated below.

below.

To use the DLNA network functionality, you must connect your PC to your network as shown

ⁱW^{n t}i^hr^eeⁱd^llusN^tre^att^iowⁿo^s.rk

Do not connect the power cord to the wall outlet until you have made all the other

connections.

When you change the connections, turn off all devices before you start.

method 1 Connecting to an HdmI supported AV receiver

• Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back of the product

to the HDMI IN jack on your receiver.

• Best quality (Recommended)

Broadband modem

(with integrated router)

method 2 Connecting to an AV receiver with dolby digital or a dTS decoder

Broadband

service

• Using a digital Coaxial cable (not supplied), connect the Coaxial Digital Audio Out jack on the

product to the Digital Coaxial In jack of the receiver.

• Good quality

• You will hear sound only through the front two speakers with Digital Output set to PCM.

Router

Broadband

service

Broadband

modem

Method 1

Audio

Method 2

Audio

NOTES

✎

Internet access to Samsung's software update server may not be allowed, depending on the router you use or your

ISP's policy. For more information, contact your ISP (Internet Service Provider).

DSL users, please use a router to make a network connection.

NOTES

✎

Selects Music.

Selects Settings.

Settings

The access steps may differ depending on

the menu you selected. The OSD (On Screen

Display) may change in this player after you

upgrade the software version.

If you leave the player in the stop mode for

more than 5 minutes without using it, a screen

saver will appear on your TV. If the player is

left in the screen saver mode for more than 25

minutes, the power will automatically turn off.

The Initial Settings Procedure

Displays the buttons you can use on the

remote to access functions.

•

The Home screen will not appear if you do not

configure the initial settings.

Display Settings

Selects applications.

Selects Videos.

Selects Photos.

The OSD (On Screen Display) may change in this

player after you upgrade the software version.

You can configure various display options

such as the TV Aspect Ratio, Resolution, etc.

Menu Navigation

The access steps may differ depending on the

menu you selected.

TV Aspect Ratio

NOTES

✎

After the initial settings process is complete, you can

Depending on the type of television you have,

you may want to adjust the screen size setting.

then operate the panel buttons and remote control.

The Videos, Photos, and Music options require

that you have an appropriate disc inserted into

the player or a USB flash device attached to

the player.

The Initial Settings Procedure appears when

you turn on player for the first time and lets you

set the OSD and menu languages, configure

the connection to your home network, and

choose the aspect ratio output (screen size

and format) that is correct for your TV. Follow

the directions that appear on the screen.

NOTES

✎

Depending on the disc type, some aspect

ratios may not be available.

If you select an aspect ratio and option which is

different than the aspect ratio of your TV screen,

the picture might appear to be distorted.

Accessing the Settings Menu

To access the Settings menu and sub-menus,

HOME Button : Press to move to the Home

menu.

follow these steps:

Bd Wise (Samsung TVs only)

NOTES

✎

Press the pOWER button.

RETURN Button : Return to the previous menu.

The Home menu will not appear if you do not

BD Wise is Samsung’s latest inter-connectivity

feature.

The Home Menu appears.

configure the initial settings except as noted below.

(Enter) / DIRECTION Button :

Press the ◄► buttons to select Settings,

If you press the BLUE (D) button during

When you connect a Samsung player and a

Samsung TV with BD Wise to each other via

HDMI, and BD Wise is on in both the player

and TV, the player outputs video at the video

resolution and frame rate of the Blu-ray Disc/

DVDs.

Move the cursor or select an item.

Activate the currently selected item.

Confirm a setting.

network setup, you can access the Home menu

even if the network setup is not completed yet.

and then press the

button.

Press the ▲▼ buttons to select the

desired submenu, and then press the

When you return to the Home menu, the full

screen mode is cancelled automatically.

EXIT Button : Press to exit the current menu.

button.

If you want to display the Initial Setting screen

Press the ▲▼ buttons to select the desired

again to make changes, press the button on

• Home menu

item, and then press the

button.

the front panel of the player for more than 5

seconds with no disc inserted. This resets the

player to its default settings.

NOTES

✎

Press the ExIT button to exit the menu.

When BD Wise is on, the Resolution setting

automatically defaults to BD Wise and BD Wise

appears in the Resolution menu.

Videos

Photos

Music

Settings

After the initial settings process is complete, you

can operate the HDMI-CEC function.

If the player is connected to a device that does not

support BD Wise, you cannot use the BD Wise function.

If you want to use the Anynet+(HDMI-CEC)

function to aid in the initial set up process,

please follow the instructions below.

For proper operation of BD Wise, set the BD

Wise menu of both the player and the TV to On.

Netflix

Pandora

YouTube

1) Connect the player to an Anynet+(HDMI-

CEC) compliant Samsung TV using HDMI Cable.

No Disc

Change Device

View Devices

Enter

2) Set the Anynet+(HDMI-CEC) feature to On in

both the TV and the player.

3) Set the TV to the Initial Settings Procedure.

NOTES

✎

Resolution

progressive mode

If the TV you connected to the player does not

Lets you set the output resolution of the HDMI

video signal to Auto, 1080p, 1080i, 720p or

480p. The number indicates the number of

lines of video per frame. The i and p indicate

interlaced and progressive scan, respectively.

The more lines, the higher the quality.

Lets you improve picture quality when viewing DVDs.

support Movie Frame or the resolution you

selected, the message "If no pictures are shown

after selecting ‘Yes’, please wait for 15 seconds

to return to the previous resolution. Do you

want to change the resolution?" appears. If you

select Yes, the TV’s screen will go blank for 15

seconds, and then the resolution will revert to

the previous resolution automatically.

Audio Settings

digital Output

Resolution according to the output

Lets you select the digital audio output format that is suitable for your TV or AV Receiver. For

more details, please refer to the Digital Output Selection table below.

mode

If the screen stays blank after you have

changed the resolution, remove all discs,

• Blu-ray disc/E-contents/digital Contents

and then press and hold the button on the

digital Output Selection

playback

front of the player for more than 5 seconds.

All settings are restored to the factory default.

Follow the steps on the previous page to

access each mode and select the Display Setup

that your TV will support.

Bitstream

(Re-encoded

DTS)

Bitstream

(Re-encoded

Dolby D)

HDMI / connected

Bitstream

Setup

PCM

HDMI Mode

Output

(Unprocessed)

E-contents/

Setup

HDMI supported

AV receiver or

Coaxial

HDMI

HDMI Receiver or

Blu-ray Disc

Digital

When the factory default settings are restored,

all stored user BD data is deleted.

Connection

Coaxial

Receiver

Coaxial

Re-encoded DTS

contents

The Blu-ray Disc must have the 24 frame feature

for the player to use the Movie Frame (24Fs) mode.

Re-encoded

Dolby Digital *

Re-encoded

Dolby Digital *

Re-encoded

Dolby Digital *

Re-encoded

Dolby Digital *

Re-encoded

Dolby Digital *

Resolution of

PCM

Dolby Digital

Up to 7.1ch PCM 2ch

PCM

PCM 2ch

BD Wise

Auto

1080p

Blu-ray Disc

PCM 2ch PCM 2ch Dolby Digital Dolby Digital Re-encoded DTS

Dolby Digital

Max. Resolution Max. Resolution

movie Frame (24Fs)

of TV input

1080@60F

of TV input

1080@60F

Dolby Digital Plus PCM 2ch PCM 2ch

Dolby Digital Re-encoded DTS

Plus

1080p@60F

Setting the Movie Frame (24Fs) feature to

Auto allows you to adjust the player’s HDMI

output to 24 frames per second for improved

picture quality.

Audio Stream

on Blu-ray

Disc

(Movie Frame : Off)

Dolby TrueHD

DTS

PCM 2ch PCM 2ch Dolby TrueHD Dolby Digital Re-encoded DTS

Movie Frame :

Auto (24Fs)

1080@24F

1080p@24F

PCM 2ch PCM 2ch

DTS

Re-encoded DTS

PCM 2ch

Dolby Digital

DTS

You can enjoy the Movie Frame (24Fs) feature

only on a TV supporting this frame rate.

You can select Movie Frame only when the

player is in the HDMI 1080i or 1080p output

resolution modes.

DTS-HD High

Resolution

Audio

1080i

720p

480p

1080i

720p

480p

1080i

720p

480p

DTS-HD High

Re-encoded

PCM 2ch PCM 2ch

DTS

Resolution Audio

Dolby Digital *

DTS-HD Master

DTS-HD

Re-encoded

Dolby Digital *

PCM 2ch

PCM 2ch PCM 2ch

DTS

PCM 2ch

Audio

Master Audio

PCM 2ch

• dVd playback

PCM

Audio Stream

on DVD

Dolby Digital

DTS

PCM 2ch PCM 2ch Dolby Digital Dolby Digital

Dolby Digital

HdmI Color Format

Output

Setup

HDMI / connected

PCM 2ch PCM 2ch

DTS

HDMI Mode

Lets you set the color space format for

Decodes main

feature audio and

BONUSVIEW audio

stream together into

PCM audio and add

Navigation Sound

Effects, then re-

encodes the PCM

audio into Dolby

Digital bitstream

Decodes main feature

BD Wise

Auto

480i

HDMI output to match the capabilities of the

Outputs only main feature audio and BONUSVIEW

audio stream so that your audio stream together

^cH^odⁿⁿm^ecI^ted^de^de^evp^iceC⁽o^TVl^,o^mr^{onitor, etc).}

Max. Resolution of TV input

Decodes main feature

audio and BONUSVIEW AV receiver can decode the

into PCM audio

1080p

1080i

1080p

1080i

720p

480p

Definition for

Blu-ray Disc

Any

audio stream together

audio bitstream.

and add Navigation

into PCM audio and add You will not hear BONUSVIEW Sound Effects, then

Navigation Sound Effects. audio and Navigation Sound

Effects.

re-encodes the

PCM audio into DTS

bitstream

720p

Lets you output video from the HDMI OUT jack with

Deep Color. Deep Color provides more accurate

color reproduction with greater color depth.

480p

* If Source Stream is 2ch, "Re-encoded

Dolby D" Settings are not applied.

In the Internet Protocol Setup field,

select Auto if it is not selected. (Press

to select Auto, and then press

Network Settings

pCm downsampling

Lets you choose to have 96KHz PCM signals

downsampled to 48KHz before they are

outputted to an amplifier. Choose only if your

amplifier or receiver is not compatible with a

96KHz signal.

Blu-ray Discs may include three audio streams :

Please contact your ISP to find out if your IP

address is static or dynamic. If it is dynamic

- and most are - we recommend using the

Auto procedure for network setup. This is

easiest and will work in the majority of cases.

If it is static, you must use the manual set up

procedure.

Main Feature Audio : The audio soundtrack

of the main feature.

The Auto Function acquires and fills

in the values for Ip Address, Subnet

mask, etc., automatically.

BONUSVIEW audio : An additional

soundtrack such as the director or actor’s

commentary.

NOTES

✎

dynamic Range Control

This process can take up to five minutes.

Navigation Sound Effects : When you

choose a menu navigation selection, a

Navigation Sound Effect may sound.

Navigation Sound Effects are different on

each Blu-ray Disc.

Network setup directions start below.

Lets you apply dynamic range control to

Dolby Digital, Dolby Digital Plus, and Dolby

True HD audio.

After the Network Function has acquired

the network values, press the RETURN

button.

NOTES

✎

This unit can only be connected to a Network

via a wired connection.

• Auto : Automatically controls the dynamic

range of Dolby TrueHD audio, based

on information in the Dolby TrueHD

soundtrack.

Select Network Test, and then press

to ensure the player has connected

NOTES

✎

to your network.

Wired Network Settings

Be sure to select the correct Digital Output or

you will hear no sound or just loud noise.

When the Network Test is complete,

press the RETURN twice to return to

the Main Menu.

Also turns dynamic range control on for

Dolby Digital and Dolby Digital Plus.

In the Home menu, press the ◄►

If the HDMI device (AV receiver, TV) is not

compatible with compressed formats (Dolby

Digital, DTS), the audio signal outputs as PCM.

buttons to select Settings, and then

• Off : Leaves the dynamic range uncompressed,

press the

button.

If the Network Function does not acquire

the network values, go to the directions

for Manual Setup.

letting you hear the original sound.

Press the ▲▼ buttons to select

• On : Turns dynamic range control on for

all three Dolby formats. Quieter sounds

are made louder and the volume of loud

sounds is reduced.

Regular DVDs do not have BONUSVIEW audio

Network, and then press the

and Navigation Sound Effects.

button.

manual Network Setup

Some Blu-ray Discs do not have BONUSVIEW

audio and Navigation Sound Effects.

Press the ▲▼ buttons to select Wired

Network Settings, and then press the

Before you start manual network setup, you

need the network setting values.

button. The Wired Network Settings

If you play MPEG audio soundtracks, the audio

signal outputs as PCM regardless of your

Digital Output selections (PCM or Bitstream).

downmixing mode

screen appears.

To get the network setting values, contact

your ISP (Internet Service Provider) or your

network administrator.

Lets you select the multi-channel downmix

method that is compatible with your stereo

system. You can choose to have the player

downmix to normal stereo or to surround

compatible stereo.

Settings

If your TV is not compatible with compressed

multi-channel formats (Dolby Digital, DTS), the

player may output PCM 2ch downmixed audio

even though you selected Bitstream (either Re-

encoded or Unprocessed) in the setup menu.

Wired Network Settings

Display

Internet Protocol Setup

IP Address

Auto

Audio

To enter the Network Settings into your

Network

System

Subnet Mask

Gateway

player, follow these steps:

Language

DNS

Auto

Security

General

Support

DNS Server

In the Home menu, press the ◄►

If your TV is not compatible with PCM sampling

rates over 48kHz, the player may output 48kHz

downsampled PCM audio even though you set

PCM Downsampling to Off.

Move

Select

Return

buttons to select Settings, and then

press the

button.

Press the ▲▼ buttons to select

Network, and then press the

button.

Press the ▲▼ buttons to select Wired

NOTES

✎

Bd-Live Internet Connection

Quick Start

Network Settings, and then press the

The way you use BD-LIVE and the provided

Set to allow or prohibit an Internet connection

when you use the BD-LIVE service.

You can turn on the power quickly by

decreasing the boot time.

button. The Wired Network Settings

contents may differ, depending on the disc

screen appears.

manufacturer.

• Allow (All) : The Internet connection is

Select the Internet Protocol Setup field,

NOTES

✎

The dLNA Function

allowed for all BD-LIVE contents.

and then press the

button.

If this function is set to On, Standby power

• Allow (Valid Only) : The Internet

connection is allowed only for BD-LIVE

contents containing a valid certificate.

Press the ▲▼ buttons to select manual,

consumption will be increased.

DLNA lets you play music, video, and photo

files located in your PC or NAS on the player.

and then press the

button.

Anynet+ (HdmI-CEC)

To use DLNA with your player, you must

connect the player to your network.

(See pages 11~12).

Press the ▼ button to go to the first

• prohibit : No Internet connection is allowed

entry field (IP Address).

Anynet+ is a convenient function that offers

linked operations with other Samsung players

that have the Anynet+ feature.

for any BD-LIVE content.

Use the number buttons on your remote

to enter numbers.

To use DLNA with your PC, you must install

DLNA software on your PC.

NOTES

✎

To operate this function, connect this player to

an Anynet+ Samsung TV with an HDMI cable.

With Anynet+ on, you can operate this player

using a Samsung TV remote control and start

disc playback simply by pressing the pLAy

What is a valid certificate?

When done with each field, use the ►

button to move to the next field. You

can also use the other arrow buttons to

move up, down, and back.

If you have NAS, you can use DLNA without

any additional software.

When the player uses BD-LIVE to send the

disc data and a request to the server to certify

the disc, the server uses the transmitted data

to check if the disc is valid and sends the

certificate back to the player.

To download dLNA software

(

) button on the TV’s remote control.

Enter the Ip Address, Subnet mask,

For more information, please see the TV user

and Gateway values in the same way.

Go to Samsung.com

manual.

✎

The Internet connection may be restricted

10. Press the ▼ button to go to dNS.

Click Support, enter your player’s

product number in the field that

appears, and then click Product.

while you are using BD-LIVE contents.

NOTES

11. Press the ▼ button to go to the first

This function is not available if the HDMI cable

does not support CEC.

Using Bd-LIVE™

DNS entry field.

On the next screen, click Get downloads

12. Enter the numbers as above.

Once the player is connected to the network,

you can enjoy various movie-related service

contents using a BD-LIVE compliant disc.

If your Samsung TV has an Anynet+ logo, then

it supports the Anynet+ function.

under Downloads.

13. Press the RETURN button on your

Click Software on the next page.

remote control.

Depending on your TV, certain HDMI output

resolutions may not work.

Click the icon in the DLNA line under File

Attach a USB memory stick to the

USB jack on the front of the player, and

then check its remaining memory. The

memory device must have at least 1GB

of free space to accommodate the BD-

LIVE services.

14. Run a Network Test to ensure the player

Please refer to the user manual of your TV.

to start the download.

has connected to your network.

If you have Anynet+ turned on, when you

turn off the product, disconnect, and then

reconnect the power cable, the product turns

on automatically to re-establish the Anynet+

connection. After about 15 seconds, it turns off

again automatically.

For instructions explaining how to play content

located on your PC, see page 15.

Network Test

Use this menu item to check whether your

ⁿN^ee^twtw^orko^cr^okⁿS^net^ca^tit^ouⁿs^{is working or not.}

System Settings

Insert a Blu-ray Disc that supports BD-

LIVE.

Some Samsung TVs, when connected to this

product using the Anynet+ function will, when

you turn them on, display a warning popup

message saying no connection has been

found. Never-the-less, the Anynet+ connection

is properly established and available to use.

Select an item from various BD-LIVE

service contents provided by the disc

manufacturer.

Initial Settings

Use to check whether a connection to a

network and the Internet has been established.

By using the Initial Settings function, you can

set the language, Network Settings, etc.

For more information about the Initial Settings

function, refer to the Initial Settings section of

this user manual (page 9).

Security Settings

Support Settings

Bd data management

Change pIN

Enables you to manage the downloaded

contents you accessed through a Blu-ray disc

that supports the BD-LIVE service and stored

on a flash drive.

Change the 4-digit password used to access

security functions.

When you access this function for the first

time, the PIN screen appears. Enter the

default PIN - 0000 - using the number

buttons. To change the PIN, use the Change

PIN function (page 13). Each time you access

the Security Settings hereafter, you must

enter that four digit PIN. If you don’t change

the PIN, continue using the default PIN.

Software Upgrade

To change the PIN, follow these steps:

The Software Upgrade menu allows you to

upgrade the player’s software for performance

improvements or additional services.

You can check the device’s information

including the storage size, delete the BD data,

or change the Flash memory device.

Select Change PIN, and then press the

button. The Enter old PIN screen

appears.

By Online

Enter the old PIN. If you never changed

the PIN, enter the default PIN: 0000.

The Enter new PIN screen appears.

NOTES

✎

To upgrade By Online, follow these steps:

In the external memory mode, disc playback

may be stopped if you disconnect the USB

device in the middle of playback.

Bd parental Rating

Select By Online, and then press the

Enter the new PIN in the Enter new PIN

Prevents playback of Blu-ray Discs with

specific age ratings unless the 4 digit PIN is

button. The Connecting to Server

fields.

message appears.

Your player supports the FAT16, FAT32, and

NTFS file systems. We recommend you use

USB devices that support USB 2.0 protocol

with 4 MB/sec or faster read/write speed.

Re-enter the new PIN in the Confirm

new PIN fields. The "PIN is changed

successfully." message appears.

^edⁿV^ted^redp^.arental Rating

A popup message will appear if an

update is available.

If you select yes, the player will turn off

automatically before restarting.

(Never turn the player on or off manually

during an upgrade.)

Press the

button.

The Resume Play function may not work after

This function works in conjunction with DVDs

that have been assigned an age rating or

numeric rating that indicates the maturity level

of the content. These numbers help you control

the types of DVDs that your family can watch.

you format the storage device.

If you forget your password

The total memory available to BD Data

Management may differ, depending on the

conditions.

Remove any discs.

The update progress popup will appear.

When the update is completed, the

player will turn off automatically.

Press and hold the @ button on the

front panel for 5 seconds or more.

All settings will revert to the factory settings.

Select the rating level you want to set.

For example, if you select Level 6, discs rated

above 6 - Level 7 and 8 - will not play.

Press the pOWER button to turn on the

Language Settings

player.

NOTES

✎

A larger number indicates more mature content.

You can select the language you prefer for the

NOTES

When the factory default settings are restored,

all the user stored BD data will be deleted.

✎

When the DVD Parental Rating function is on,

you must enter the 4 digit PIN to play discs

with restricted rating levels.

Home menu, disc menu, audio, and subtitles.

The Update is complete when the player turns

off after restarting. Press the POWER button to

turn on the updated player for your use.

NOTES

✎

General Settings

The selected language will only appear if it is

supported on the disc.

Never turn the player off or back on manually

during the update process.

Time Zone

Samsung Electronics takes no legal

Lets you specify the time zone that is

applicable to your area.

responsibility for player malfunction caused by

an unstable Internet connection or consumer

negligence during a software upgrade.

Select Auto Upgrade Notification, and

By USB

then press the

button.

Media Play

To upgrade by USB, follow these steps:

Use the ▲▼ buttons to select On, and

then press the

button.

Visit www.samsung.com/bluraysupport.

Playing a Commercially Recorded

If there is a new software version available,

Videos

Photos

Music

Settings

Disc

Download the latest USB software

the player notifies you with a popup message.

upgrade zip archive to your computer.

To upgrade the firmware, select yes

in the Pop-up. The player turns off

automatically, then restarts, and begins

the download. (Never turn the player on

or off manually during an upgrade.)

Unzip the zip archive to your computer.

You should have a single RUF file with

the same name as the zip file.

Press the

tray.

button to open the disc

No Disc

123

Place a disc gently into the disc tray

Pandora

YouTube

Copy the RUF file to a USB flash drive.

with the disc's label facing up.

123

Change Device

Safely Remove USB

View Devices

Enter

Make sure there is no disc in the player,

and then insert the USB flash drive into

the USB port of the player.

Press the

button to close the disc

The update progress popup appears.

tray. Playback starts automatically.

Press the ◄► buttons to select Videos,

When the update is complete, the player

turns off again automatically.

music, or photos, and then press the

button. Go to Step 7.

In the player’s menu, go to Settings >

Press the pOWER button to turn on the

Playing Files on a USB Device

-1

Support > Software Upgrade.

player.

5 . Press the ◄► buttons to select USB,

then press the

button.

Select By USB.

You can play multimedia files located on a

NOTES

✎

USB storage device.

The update is complete when the player turns

off after restarting. Press the POWER button to

turn on the updated player for your use.

NOTES

✎

123

Settings

No disc should be in the product when you

upgrade the software using the USB Host jack.

Move to the Home menu.

In Stop mode, connect the USB storage

device to the USB port on the front

panel of the player.

Never turn the player off or on manually during

the update process.

When the software upgrade is done, check the

software details in the software Upgrade menu.

Samsung Electronics takes no legal

The message "Do you want to access

Do not turn off the player during the software

upgrade. It may cause the player to malfunction.

responsibility for player malfunction caused by

an unstable Internet connection or consumer

negligence during software upgrade.

the device?" is displayed.

Netflix

123

Pandora

YouTube

Home

Enter

Press the ◄► button to select yes, and

Software upgrades using the USB Host jack

must be performed with a USB flash memory

stick only.

then press the

button.

-1

6 . Press the ▲▼ buttons to select Videos,

Contact Samsung

If you have a disc in the Blu-ray player,

press the REd (A) or BLUE (d) button.

If you do not, go to Step 6.

music or photos, and then press the

Provides contact information for assistance

button.

Auto Upgrade Notification

^wTe^ithrm^yos^uro^pf^laS^yee^r.rvice Agreement

A screen appears listing the contents

of the device. Depending on how the

contents are arranged, you will see

either folders, individual files, or both.

If you pressed the REd (A) button, go to

Step 5.

If you have connected the player to your

network, and then set Auto Upgrade

Notification on, the player automatically

notifies you when a new software version is

available for the player.

If you pressed the BLUE (d) button, go

-1

to Step 5 .

Lets you view the general disclaimer regarding

third party contents and services.

If necessary, use the ▲▼◄►buttons to

Press the ▲▼ buttons to select USB,

select a folder, and then press the

and then press the

button.

To set Auto Upgrade Notification on, follow

these steps:

button.

Reset

Returns all settings to their factory defaults

except for the network settings.

Use the ◄►▲▼ buttons to select a file

Press the RETURN button one or more

times to exit a current screen, exit a

folder, or to return to the Home screen.

Press the ExIT button to return directly

to the Home Screen.

Playing a Disc with User Recorded

Content

Playing Content Located in Your PC

to view or play, and then press the

button.

NOTES

To play content located in your PC on your

Blu-ray disc player, you must connect the

Blu-ray player to you network. (See pages

11~12.) and install DLNA Software on your

You can play multimedia files you have

✎

recorded on Blu-ray, DVD, or CD discs.

Even though the player will display folders for

all content types, it will only display files of the

Content Type you selected in Step 6 or Step

6-1.

Go to pages 15~17 for instructions

that explain how to control playback of

videos, music, and pictures on a PC.

Place a user recorded disc into the

disc tray with the disc’s label facing

up, and then close the tray. The Device

Connected pop-up appears.

^PTo^C.play Content From your pC

For example, if you selected music, you will

only be able to see music files. You can change

this selection by returning to the Home screen

and following the directions from Step 4.

Go to the Home Menu.

Use the ◄► buttons to select the type

of content you want to view or play -

Videos, Photos, or Music - and then

Controlling Video Playback

Press the BLUE (d) button on your

You can control the playback of video content

located on a Blu-ray disc, DVD, CD, USB

device, or you computer. Depending on the

media, some of the functions described in this

manual may not be available.

remote (Device).

press the

button.

10. Press the RETURN button one or more

times to exit a current screen, exit a

folder, or to return to the Home screen.

Press the ExIT button to return directly

to the Home Screen.

In the Device screen that appears, select

NOTES

✎

your PC, and then press the

button.

Even though the player will display folders for

all content types, it will only display files of

the Content Type you selected in Step 2. For

example, if you selected music, you will only

be able to see music files. You can change this

selection by returning to the Home screen and

repeating Step 2.

Use the ◄► buttons to select the type

of content you want to view or play -

Videos, Photos, or Music - and then

During Blu-ray or DVD disc playback, the Full

^sB^cu^ret^etⁿo^bn^us^ttooⁿn^doth^eseⁿR^ote^om^peo^rat^te^e.Control

11. The controls and tools you use to

control and play videos, music, and

pictures located on a USB device are

identical to those you use to play videos,

music, and pictures on a disc.

press the

button.

NOTES

✎

used for Video playback

Even though the player will display folders for

all content types, it will only display files of

the Content Type you selected in Step 4. For

example, if you selected music, you will only

be able to see music files. You can change this

selection by returning to the Home screen and

repeating Step 4.

A screen appears listing the contents

of the disc. Depending on how the

contents are arranged, you will see

either folders, individual files, or both.

Go to pages 15~17 for instructions.

NOTES

✎

You must remove the USB storage device

safely by performing the "Safely Remove USB"

function in order to prevent possible damage

to the USB memory. Press the MENU button to

move to the Home menu, select the YELLOW

If necessary, use the ▲▼◄►buttons to

select a folder, and then press the

A screen appears listing the contents

on your PC. Depending on how the

contents are arranged, you will see

either folders, individual files, or both.

button.

Use the ◄►▲▼ buttons to select a file

button.

to view or play, and then press the

playback related buttons

If you insert a disc when playing a USB storage

device, the device mode changes to Blu-ray,

DVD or CD automatically.

button.

If necessary, use the ▲▼◄►buttons to

The player does not play sound in Search,

Slow or Step mode.

Press the RETURN button one or more

times to exit a current screen, exit a

folder, or to return to the Home screen.

Press the ExIT button to return directly

to the Home Screen.

select a folder, and then press the

button.

• To return to normal speed playback, press

Use the ◄►▲▼ buttons to select a file

the

button.

to view or play, and then press the

button.

Go to pages 15~17 for instructions

that explain how to control playback of

videos, music, and pictures on a disc.

Controlling Music Playback

Repeat an Audio Cd (Cd-dA)/

playlist

button

Starts playback.

Stops playback.

mp3

You can control the playback of music located

To move to the Music List, press the

on a Blu-ray disc, DVD, CD, USB device, or

or RETURN button.

During Playlist playback, press the

Pauses playback.

During playback, press the

^yB^ou^urtt^co^omns^puo^ten^r.the Remote Control

1/2 Page

The Music List screen appears.

TOOLS button.

Playlist

1/6

Music

button.

TRACK 001

Tools

Fast Motion

Play

TRACK 001

TRACK 002

Repeat Mode

Off

Each time you press the

05:57

used for music playback

02:38

InformTR

002

04:27

button, the playback speed

TRACK 003

TRACK 004

02:38

Adjust

Move

Return

02:38

TRACK 003

TRACK 004

TRACK 005

TRACK 006

04:07

03:41