Samsung BD E5200 User Manual

BD-E5200  
BD-E5300  
Blu-ray Disc Player  
user manual  
imagine the possibilities  
Thank you for purchasing this Samsung product.  
To receive more complete service,  
please register your product at  
ENGLISH  
12. Use only with the  
This product satisfies CE regulations when  
shielded cables and connectors are used  
to connect the unit to other equipment.  
To prevent electromagnetic interference  
with electric appliances, such as radios  
and televisions, use shielded cables and  
Blu-ray Discs  
Precautions  
cart, stand, tripod,  
bracket, or table  
Do not leave a Blu-ray Disc in the player for  
long periods of time. Remove the Blu-ray  
Disc from the player and store it in its case.  
Be careful not to scratch or leave  
fingerprints on the surface of the Blu-ray  
Disc.  
specified by the  
Important Safety Instructions  
manufacturer,  
or sold with the  
Read these operating instructions carefully  
before using the unit. Follow all the safety  
instructions listed below.  
apparatus. When a  
connectors for connections  
.
cart is used, use caution when moving  
the cart/apparatus combination to avoid  
injury from tip-over.  
IMPORTANT NOTE  
Keep these operating instructions handy for  
future reference.  
DVD-VIDEO, Audio CD (CD-DA)  
The mains lead on this equipment is supplied  
with a moulded plug incorporating a fuse. The  
value of the fuse is indicated on the pin face  
of the plug.  
13. Unplug this apparatus during lightning  
storms or when unused for long periods  
of time.  
1. Read these instructions.  
Wipe off dirt or contamination on the disc  
2. Keep these instructions.  
with a soft cloth.  
3. Heed all warnings.  
14. Refer all servicing to qualified service  
personnel. Servicing is required when  
the apparatus has been damaged in any  
If it requires replacing, a fuse approved to  
BS1362 of the same rating must be used.  
Never use the plug with the fuse cover  
omitted if the cover is detachable. If a  
replacement fuse cover is required, it must be  
of the same colour as the pin face of the plug.  
Replacement covers are available from your  
dealer.  
4. Follow all instructions.  
Disc Storage  
5. Do not use this apparatus near water.  
6. Clean only with a dry cloth.  
7. Do not block any ventilation openings.  
Install in accordance with the  
way, such as when power-supply cord or Be careful not to damage the disc because  
plug is damaged, liquid has been spilled  
the data on these discs is highly vulnerable to  
or objects have fallen into the apparatus, the environment.  
the apparatus has been exposed to rain  
or moisture, does not operate normally,  
or has been dropped.  
Do not keep under direct sunlight.  
Keep in a cool ventilated area.  
Store vertically.  
manufacturers instructions.  
8. Do not install near any heat sources such  
as radiators, heat registers, stoves, or  
other apparatus (including AV receivers)  
that produce heat.  
If the fitted plug is not suitable for the power  
points in your house or the cable is not long  
enough to reach a power point, you should  
obtain a suitable safety approved extension  
lead or consult your dealer for assistance.  
However, if there is no alternative to cutting  
off the plug, remove the fuse and then safely  
dispose of the plug. Do not connect the plug  
to a mains jack, as there is a risk of shock  
hazard from the bared flexible cord.  
Keep in a clean, protective jacket.  
If you move your player suddenly from a  
cold place to a warm place, condensation  
may occur on the operating parts and lens  
and cause abnormal disc playback. If this  
occurs, unplug the player, wait for two  
hours, and then connect the plug to the  
power outlet. Then, insert the disc, and try  
to play back again.  
Disc Storage & Management  
Disc Handling  
9. Do not defeat the safety purpose of  
the polarized or grounding-type plug.  
A polarized plug has two blades with  
one wider than the other. A grounding  
type plug has two blades and a third  
grounding prong. The wide blade or  
the third prong are provided for your  
safety. If the provided plug does not fit  
into your outlet, consult an electrician for  
replacement of the obsolete outlet.  
10. Protect the power cord from being  
walked on or pinched particularly at  
plugs, convenience receptacles, and the  
point where they exit from the apparatus.  
11. Only use attachments/accessories  
specified by the manufacturer.  
Disc Shape  
Use discs with  
To disconnect the apparatus from the mains,  
the plug must be pulled out from the mains  
socket, therefore the mains plug shall be  
readily operable.  
regular shapes. If you  
use an irregular disc  
Handling Cautions  
(a disc with a special  
Do not write on the printed side with a ball-  
shape), you can damage the player.  
point pen or pencil.  
The product unit accompanying this user  
manual is licensed under certain intellectual  
property rights of certain third parties.  
Do not use record cleaning sprays or  
antistatic sprays to clean discs. Also,  
do not use volatile chemicals, such as  
benzene or thinner.  
Holding discs  
Avoid touching the surface  
of a disc where data has  
been recorded.  
Do not apply labels or stickers to discs.  
(Do not use discs fixed with exposed tape  
adhesive or leftover peeled-off stickers.)  
3
Do not use scratch-proof protectors or covers.  
Do not use discs printed with label printers  
available on the market.  
If you encounter an abnormal noise, burning  
smell or smoke, turn off the power switch  
immediately and disconnect the power plug  
from the wall outlet. Then, contact the nearest  
customer center for technical assistance. If you  
still use the product as it is, this may cause an  
electric shock or fire.  
Contents  
Do not load warped or cracked discs.  
Before connecting other components to this  
player, be sure to turn them off.  
Audio.........................................................14  
Network ....................................................16  
System......................................................17  
Language ..................................................17  
Security.....................................................17  
General......................................................18  
Support.....................................................18  
KEY FEATURES  
Blu-ray Disc Features...................................2  
Do not move the player while it is playing a disc.  
The disc can be scratched or damaged and the  
players internal parts can be damaged.  
Do not put a flower vase filled with water or any  
small metal objects on the player.  
Blu-ray Disc Player Features........................2  
Maintenance of Cabinet  
SAFETY INFORMATION  
Before you clean the Blu-ray Discs cabinet,  
be sure to disconnect the AC power cord  
from the AC outlet.  
Warning.......................................................2  
Precautions .................................................3  
Disc Storage & Management.......................3  
Be careful not to put your hand into the disc slot.  
Do not place anything other than the disc in the  
disc slot.  
Do not use benzene, thinner, or other  
solvents for cleaning.  
BASIC FUNCTIONS  
Interference from exterior sources such as  
lightening and static electricity can affect the  
normal operation of this player. If this occurs,  
turn the player off and on again with the POWER  
button, or disconnect and then reconnect the AC  
power cord to the AC power outlet. The player  
will operate normally.  
GETTING STARTED  
Wipe the cabinet with a soft cloth.  
Playing a Video..............................................19  
Using the Disc Menu/Title Menu/  
Before using the User Manual......................5  
Accessories.................................................7  
Front Panel..................................................8  
Rear Panel...................................................8  
Remote Control...........................................9  
Restrictions on Playback  
Popup Menu..................................................19  
Using the Search and Skip Functions ............19  
Slow Motion Play/Step Motion Play ...............20  
Using the TOOLS button ...............................20  
Listening to Music..........................................21  
Playing back Pictures ....................................22  
Playing back a USB Storage Device ..............22  
This player may not respond to all operating  
commands because some Blu-ray Disc,  
DVD, and CD discs allow specific or limited  
operation and provide only certain features  
during playback.  
Be sure to remove the disc and turn off the  
player after use.  
Disconnect the AC power cord from the AC  
outlet when you don’t intend to use the player for  
long periods of time.  
CONNECTIONS  
Please note that this is not a defect in the  
player.  
A. Connecting to a TV .................................9  
B. Connecting to an Audio System............10  
C. Connecting to a Network ......................10  
Samsung cannot guarantee that this player  
will play every disc bearing the Blu-ray  
Disc, DVD or CD logo because disc  
formats evolve, and problems and errors  
may occur during the creation of Blu-ray  
Disc, DVD, and CD software and/or the  
manufacture of discs.  
To clean a disc, wipe it in a  
straight line from the inside to the  
NETWORK SERVICES  
outside of the disc.  
Do not expose the player to any  
BD-LIVE™.................................................23  
Using the AllShare Function.......................23  
SETUP  
liquid.  
When the AC plug is connected to a wall outlet,  
the player will still draw power (standby mode)  
when it is turned off.  
The Initial Settings Procedure.....................12  
Menu Navigation........................................12  
Accessing the Settings Menu ....................12  
Display ......................................................13  
APPENDIX  
Please contact the SAMSUNG customer  
care center if you have questions or  
encounter difficulty in playing Blu-ray Disc,  
DVD, or CD discs in this player. Also, refer  
to rest of this user manual for additional  
information on playback restrictions.  
Apparatus shall not be exposed to dripping or  
splashing and no objects filled with liquids, such  
as vases, shall be placed on the apparatus.  
The main plug is used as a disconnect device  
and shall stay readily operable at any time.  
Do not touch the power plug with a wet hand.  
Otherwise, it can cause an electric shock.  
Do not share one power socket with multiple  
electric devices. Otherwise, it may cause an  
overheat, resulting in a fire.  
Troubleshooting.........................................23  
Specifications............................................25  
4
Disc types your player cannot play  
Getting Started  
HD DVD  
DVD-RAM  
DVD-RW(VR mode)  
3.9 GB DVD-R Disc for  
Authoring.  
DVD-ROM/PD/MV-  
Disc, etc  
Super Audio CD  
(except CD layer)  
CVD/CD-ROM/CDV/  
CD-G/CD-I/LD  
Before using the User Manual  
(CD-Gs play audio only,  
not graphics.)  
Disc Types and Contents your player can play  
Logo  
Icon  
Content  
Definition  
NOTE  
Blu-ray Disc Compatibility  
Some commercial discs and DVDs discs purchased  
outside your region may not play on this player.  
Blu-ray Disc is a new and evolving format.  
Accordingly, disc compatibility issues are  
possible. Not all discs are compatible and  
not every disc will play back. For additional  
information, refer to the Compliance and  
Compatibility Notice section of this user manual.  
h
z
Indicates a function available on a BD-ROM or BD-RE/-R disc  
recorded in the BD-RE format.  
Playback may not work for some types of discs,  
or when you use specific operations, such as  
angle change and aspect ratio adjustment.  
Information about the discs is written in detail on  
the disc box. Please refer to this if necessary.  
Do not allow the disc to become dirty or  
scratched. Fingerprints, dirt, dust, scratches or  
deposits of cigarette smoke on the recording  
surface may make it impossible to use the disc  
for playback.  
Disc Types  
BD-ROM  
Indicates a function available on a DVD-VIDEO or recorded  
DVD+RW/DVD-RW(V)/DVD-R/+R discs that have been recorded  
and finalized.  
Z
VIDEO  
Blu-ray ROM discs can only be played back.  
This player can play back pre-recorded  
commercial BD-ROM discs.  
When you play a BD-J title, loading may take  
longer than a normal title or some functions may  
perform slowly.  
Indicates a function available on a CD-RW/-R, DVD-RW/-R, BD-  
RE/-R disc or in a USB storage media containing DivX, MKV, MP4  
contents.  
BD-RE/-R  
-
o
G
This player may not respond to all operating  
commands because some Blu-ray Disc, DVD, and  
CD discs allow specific or limited operation and  
provide only certain features during playback.  
Please note that this is not a defect in the player.  
Blu-ray RE/-R discs can be recorded on and  
played back.  
Indicates a function available on an audio CD-RW/-R (CD-DA  
format).  
This player can play back a BD-RE/-R disc  
recorded by other compatible Blu-ray Disc  
recorders.  
MUSIC  
Indicates a function available on a CD-RW/-R, DVD-RW/-R, BD-  
RE/-R disc or in a USB storage media containing MP3 or WMA  
contents.  
-
-
Samsung cannot guarantee that this player will  
play every disc bearing the Blu-ray Disc, DVD  
or CD logo because disc formats evolve, and  
problems and errors may occur during the creation  
of Blu-ray Disc, DVD, and CD software and/or the  
manufacture of discs.  
DVD-VIDEO  
Indicates a function available on a CD-RW/-R, DVD-RW/-R, BD-  
RE/-R disc or in a USB storage media containing JPEG contents.  
PHOTO  
This player can play back pre-recorded  
commercial DVDs (DVD-VIDEO discs) with  
movies.  
NOTE  
The player may not play certain CD-RW/-R and DVD-R because of the disc type or recording conditions.  
If a DVD-RW/-R disc has not been recorded properly in DVD video format, it will not be playable.  
Your player will not play content that has been recorded on a DVD-R at a bit-rate that exceeds 10 Mbps.  
Your player will not play content that has been recorded on a BD-R or USB device at a bit rate that exceeds  
25 Mbps.  
When switching from the first layer to the  
second layer of a dual-layered DVD-VIDEO  
disc, there may be momentary distortion  
in the image and sound. This is not a  
malfunction of the player.  
Please contact the SAMSUNG customer care  
center if you have questions or encounter difficulty  
when playing Blu-ray Disc, DVD, or CD discs in  
this player. Also, refer to rest of this user manual  
for additional information on playback restrictions.  
5
AVCHD (Advanced Video Codec High  
Definition)  
DVD-RW/-R/+R  
Supported File Formats  
Region  
Code  
Disc Type  
Area  
This player can play back a DVD-RW/-R/+R  
disc recorded and finalized with a DVD video  
recorder. The ability to play back may depend  
on recording conditions.  
Notes on the USB connection  
This player can play back AVCHD format  
discs. These discs are normally recorded and  
used in camcorders.  
North America, Central  
America, South America,  
Korea, Japan, Taiwan, Hong  
Kong and South East Asia.  
Your player supports USB storage media, MP3  
players, digital cameras, and USB card readers.  
A
B
C
1
The AVCHD format is a high definition digital  
video camera format.  
DVD+RW  
The player does not support folder or file names  
longer than 128 characters.  
The MPEG-4 AVC/H.264 format compresses  
images with greater efficiency than the  
conventional image compressing format.  
Some AVCHD discs use the “x.v.Color”  
format. This player can play back AVCHD  
discs that use “x.v.Color” format.  
“x.v.Color” is a trademark of Sony  
Corporation.  
Blu-ray  
Disc  
Europe, Greenland, French  
territories, Middle East, Africa,  
Australia and New Zealand.  
This player can play back a DVD+RW  
disc recorded with a DVD Video recorder.  
The ability to play back may depend on  
recording conditions.  
Some USB/External HDD/digital camera devices  
may not be compatible with the player.  
Your player supports the FAT16, FAT32, and  
NTFS files systems.  
India, China, Russia, Central  
Connect USB devices directly to the players  
USB port. Connecting through a USB cable may  
cause compatibility problems.  
and South Asia.  
Audio CD (CD-DA)  
The U.S., U.S. territories and  
Canada  
Europe, Japan, the Middle  
East, Egypt, South Africa,  
Greenland  
This player can play back CD-DA format  
audio CD-RW/-R discs.  
“AVCHD” and the AVCHD logo are  
trademarks of Matsushita Electronic Industrial  
Co., Ltd. and Sony Corporation.  
Inserting more than one memory device into  
a multi-card reader may cause the reader to  
operate improperly.  
The player may not be able to play some  
CD-RW/-R discs due to the condition of  
the recording.  
2
3
NOTE  
The player does not support the PTP protocol.  
Some AVCHD format discs may not play,  
depending on the recording condition.  
AVCHD format discs need to be finalized.  
Do not disconnect a USB device during a  
“loading” process.  
CD-RW/-R  
Taiwan, Korea, the Philippines,  
Indonesia, Hong Kong  
The bigger the image resolution, the longer the  
image takes to display.  
Use a 700MB (80 minute) CD-RW/-R disc.  
If possible, do not use an 800MB (90 minute) or  
larger disc, as the disc may not play back.  
If the CD-RW/-R disc was not recorded as a  
closed session, you may experience delays  
when playing back the beginning of the disc or  
all recorded files may not play.  
“x.v.Color” offers a wider colour range than  
Mexico, South America,  
Central America, Australia,  
New Zealand, Pacific Islands,  
Caribbean  
Russia, Eastern Europe, India,  
most of Africa, North Korea,  
Mongolia  
DVD-VIDEO  
normal DVD camcorder discs.  
This player cannot play MP3 files with DRM  
(Digital Rights Management) downloaded from  
commercial sites.  
Some DivX, MKV and MP4 format discs may  
not play, depending on the video resolution and  
frame rate condition.  
4
Your player only supports the video that is under  
30fps (frame rate).  
Some CD-RW/-R discs may not play on this player,  
depending on the device which was used to burn  
them. For contents recorded on CD-RW/-R media  
from CDs for your personal use, playability may  
vary depending on the contents and discs.  
5
Region Code  
Both players and discs are coded by region.  
These regional codes must match for a disc  
to play. If the codes do not match, the disc  
will not play.  
China  
6
Copyright  
The Region Code for this player is displayed  
on the rear panel of the player.  
© 2012 Samsung Electronics Co.,Ltd.  
All rights reserved; No part or whole of this  
users manual may be reproduced or copied  
without the prior written permission of  
Samsung Electronics Co.,Ltd.  
6
Video File Support  
File Extension  
Music File Support  
Container  
Video Codec  
DivX 3.11/4.x/5.1/6.0  
MP4v3  
Audio Codec  
Resolution  
1920x1080  
1920x1080  
File Extension  
Container  
Audio Codec  
Support Range  
MP3  
*.mp3  
MP3  
-
MP3  
Dolby DIgital  
*.avi  
AVI  
DTS  
WMA  
PCM  
*
*
Sampling rates (in kHz) - 8, 11, 16, 22, 32, 44.1, 48  
Bit rates - All bit-rates from 5kbps to 384kbps  
*.wma  
WMA  
WMA  
1920x1080  
H.264 BP/MP/HP  
1920x1080  
1920x1080  
1920x1080  
1920x1080  
1920x1080  
1920x1080  
1920x1080  
1920x1080  
1920x1080  
1920x1080  
VC-1 AP  
DivX 5.1/6.0  
H.264 BP/MP/HP  
VC-1 AP  
MP3  
Dolby DIgital  
DTS  
Logos of Discs the player can play  
*.mkv  
MKV  
*.wmv  
*.mp4  
WMA  
AAC  
WMV (wmv9)  
MP4  
VC-1 SM  
MP4 (mp4v)  
H.264 BP/MP/HP  
MPEG1  
MPEG2  
H.264 BP/MP/HP  
PAL broadcast System in  
U.K., France, Germany, etc  
Blu-ray Disc  
BD-LIVE  
MP1, 2  
Dolby DIgital  
DTS  
*.mpg  
PS  
Accessories  
Check for the supplied accessories shown below.  
*.mpeg  
Limitations  
-
Even when the file is encoded by a supported codec mentioned above, a file might not be played if its  
content has a problem.  
- Normal playback is not guaranteed if the files container information is wrong or the file itself is corrupted.  
- Files having higher Bit rate/frame rate than standard may stutter during sound/video playback.  
- The Seek (skip) function is not available if the files index table is damaged.  
Video decoder  
Batteries for Remote Control (AAA Size)  
User Manual  
- Supports up to H.264 Level 4.1and AVCHD  
- Does not support H.264 FMO/ASO/RS, and VC1 SP/MP/AP L4.  
- MPEG4 SP, ASP :  
Below 1280 x 720 : 60 frames max  
Above 1280 x 720 : 30 frames max  
- Does not support GMC 2 or higher  
Remote Control  
Audio decoder  
- Supports WMA 7, 8, 9 and STD  
- Does not support WMA sampling rate of 22050Hz mono.  
7
Rear Panel  
Front Panel  
a
a b  
c
bc  
d
e
g
f
Use for network based services, BD-LIVE, and software upgrades using  
a network connection.  
LAN  
1
DISC TRAY  
Opens to accept a disc.  
1
2
REMOTE CONTROL  
Detects signals from the remote control.  
Using an HDMI cable, connect this HDMI output terminal to the HDMI  
input terminal on your TV for the best quality picture or to your AV  
receiver for the best quality sound.  
SENSOR  
HDMI OUT  
2
3
DISPLAY  
OPEN/CLOSE BUTTON  
POWER BUTTON  
Displays the playing status, time, etc.  
Opens and closes the disc tray.  
Turns the player on and off.  
3
4
5
DIGITAL AUDIO OUT  
Connects to an AV receiver.  
You can connect a USB memory flash stick here and use it as storage  
when the player is connected to BD-LIVE. You can also use the USB Host  
for software upgrades and MP3/JPEG/DivX/MKV/MP4 playback.  
USB HOST  
6
7
PLAY/PAUSE BUTTON  
NOTE  
Plays a disc or pauses playback.  
You can perform software upgrades using the USB Host jack with a USB flash memory stick only.  
When the player displays the Blu-ray Disc menu, you cannot start the movie by pressing the Play button on  
the player or the remote. To play the movie, you must select Play Movie or Start in the disc menu, and then  
press the ENTER button.  
8
Remote Control  
Connections  
A. Connecting to a TV  
Tour of the Remote Control  
Connecting to a TV with an HDMI Cable - Best Quality  
Turn the player on and off.  
Turn the TV on and off.  
1. Using an HDMI cable, connect the HDMI OUT terminal on the rear of the player to the  
HDMI IN terminal of your TV. See page 11.  
After setup, allows you to set the input  
source on your TV.  
Press to eject a disc.  
TV volume adjustment.  
2. Turn on the player and TV.  
3. Press the input selector on your TV remote control until the HDMI signal from the player  
appears on your TV screen.  
Press numeric buttons to operate options.  
NOTE  
An HDMI cable outputs digital video/audio, so you don’t need to connect an audio cable.  
Use to enter the disc menu.  
Use to enter the popup menu/title menu.  
If the player is connected to your TV in the HDMI 720p, 1080i, or 1080p output mode, you must use a High  
speed (category 2) HDMI cable.  
Press to skip backwards or forwards.  
Press to search a disc backwards or  
forwards.  
Press to stop a disc.  
Press to play a disc.  
Press to pause a disc.  
HDMI outputs only a pure digital signal to the TV.  
Press to move to the home menu.  
If your TV does not support HDCP (High-bandwidth Digital Content Protection), random noise appears on the  
screen.  
Use to access various audio functions on a  
Press to switch the Blu-ray Disc/DVDs  
subtitle language.  
disc (Blu-ray Disc/DVD).  
Depending on your TV, certain HDMI output resolutions may not work. Please refer to the user manual of  
your TV.  
Press to use Tools menu.  
Use to display the playback information  
when playing a Blu-ray Disc/DVDs.  
Use to select menu items and change menu  
value.  
When you connect the player to the TV using the HDMI cable for the first time or to a new TV, the HDMI  
output resolution will be automatically set to the highest supported by the TV.  
Return to the previous menu.  
Press to exit the menu.  
A long HDMI cable may cause screen noise. If this occurs, set Deep Color to Off in the menu.  
These buttons are used both for menus on the  
If you use an HDMI-to-DVI cable to connect to your display device, you must also connect the Digital Audio  
Out to an audio sytem to hear audio.  
player and also several Blu-ray Disc functions.  
Press to use the bonusview function.  
Allows you to repeat A-B disc  
Press to see the full screen on a TV.  
Allows you to repeat a title, chapter, track  
or disc.  
Installing batteries  
NOTE  
If the remote does not operate properly:  
Check the polarity (+/–) of the batteries.  
Check if the batteries are drained.  
Check if the remote sensor is blocked by obstacles.  
Check if there is any fluorescent lighting nearby.  
!
CAUTION  
Dispose of batteries according to local environmental  
regulations. Do not put them in the household trash.  
9
B. Connecting to an Audio System  
C. Connecting to a Network  
This player lets you use network based services such as BD-LIVE, and download software  
upgrades when it is connected to a network. We recommend using a Broadband modem (with  
integrated router) or IP router for the connection. For more information on router connections,  
refer to the user manual of the router or contact the router manufacturer for technical assistance.  
Cable Network  
Please turn the volume down when you turn on the AV receiver. A sudden loud sound  
may cause damage to the speakers and your ears.  
Please set the audio format according to the capabilities of your AV receiver.  
The position of HDMI input terminals may vary depending on your AV receiver. Please  
refer to the user manual of your AV receiver.  
1. Using a Direct LAN (UTP) CAT 5 cable, connect the LAN terminal of the player to the LAN  
Case 1 : Connecting to an Audio System (HDMI supported AV  
receiver) - Best Quality (Recommended)  
terminal of your modem or router. See page 11  
2. Set the network options. See page 16.  
NOTE  
1. Using an HDMI cable, connect the HDMI OUT terminal on the rear of the player to the  
Internet access to Samsung’s software update server may not be allowed, depending on the router you use  
or your ISP’s policy. For more information, contact your ISP (Internet Service Provider).  
HDMI IN terminal of your AV receiver. See page 11.  
2. Using an HDMI cable, connect the HDMI OUT terminal of the AV receiver to the HDMI IN  
terminal of your TV.  
DSL users, please use a router to make a network connection.  
To use the AllShare function, you must connect your PC to your network as shown in the figure.  
The connection can be wired.  
3. Turn on the player, TV, and AV receiver.  
4. Using the input select button of the AV receiver and TV, select the correct HDMI input or  
each to hear sound and see video from the player. Refer to your AV receivers user manual  
to set the AV receivers audio input.  
Case 2 : Connecting to an Audio System (AV receiver with Dolby  
Digital or DTS decoder) - Better Quality  
1. Using a coaxial cable, connect the DIGITAL AUDIO OUT (COAXIAL) terminal on the rear of  
the player to the DIGITAL AUDIO IN (COAXIAL) terminal of your AV receiver. See page 11.  
2. Using an HDMI cable, connect the HDMI terminal on the rear of the player to the HDMI  
terminal of your TV.  
3. Turn on the player, TV, and AV receiver.  
4. Press the input select button of the AV receiver to select the correct external input and hear  
sound from the player. Refer to your AV receivers user manual to set the AV receivers audio  
input.  
5. Press the input selector on your TV remote control to select the HDMI video source.  
10  
Connecting to an Audio System  
A
C
Connecting to a TV  
B
Case 1 : HDMI cable  
(not included)  
HDMI cable  
(not included)  
Case 1 : HDMI cable  
(not included)  
Network  
Case 2 : Coaxial cable  
(not included)  
Router  
Broadband modem (with  
integrated router)  
service  
Or  
Broadband modem  
Broadband  
service  
Broadband  
Networking with PC for AllShare function  
NOTE : You can only connect this unit to a network via a wired connection.  
11  
Selects Videos.  
Selects YouTube.  
Selects Photos.  
Selects Music.  
Selects Settings.  
1
2
3
4
5
Menu Navigation  
Setup  
7. The “Initial settings completed.” message  
appears, and then the Home screen  
appears.  
The Initial Settings Procedure  
1
2
1. Turn on your TV after connecting the  
- If you Blu-ray player does not connect to your  
network or you want to connect manually, go to  
Network Setup on page 16.  
player.  
When you connect the player to a TV for the  
first time, the player turn on automatically  
and the Initial Settings screen appears.  
3
4
NOTE  
Displays the buttons you can use on the  
6
The Home menu will not appear if you do not  
configure the initial settings except as noted  
below.  
remote to access functions.  
Initial Settings I On-Screen Language  
Select a language for the on-screen displays.  
If you press the BLUE (D) button during network  
setup, you can access the Home menu even if  
the network setup is not completed yet.  
When you return to the Home menu, the full  
screen mode is cancelled automatically.  
If you want to display the Initial Setting screen again  
HOME Button : Press to move to the Home  
English  
Accessing the Settings Menu  
1
Français  
Deutsch  
Español  
Italiano  
menu.  
To access the Settings menu and sub-menus,  
RETURN Button : Return to the previous  
follow these steps:  
2
3
4
Nederlands  
menu.  
1. Press the POWER button.  
>
Move  
"
Select  
ENTER / DIRECTION Button :  
Move the cursor or select an item.  
Activate the currently selected item.  
Confirm a setting.  
The Home Menu appears.  
to make changes, press the PLAY/PAUSE (  
)
2. Press the ◄► buttons to select Settings,  
and then press the ENTER button.  
3. Press the ▲▼ buttons to select the  
desired submenu, and then press the  
ENTER button.  
button on the front panel of the player for more than  
5 seconds with no disc inserted. This resets the  
player to its default settings.  
2. Use the ▲▼ buttons on the remote to  
select the desired language, and then  
press the ENTER button.  
If you use an HDMI cable to connect the player  
to an Anynet+(HDMI-CEC)-compliant Samsung  
TV and 1.) You have set the Anynet+(HDMI-  
CEC) feature set to On in both the TV and  
the player and 2.) You have set the TV to a  
language supported by the player, the player will  
select that language as the preferred language  
automatically.  
EXIT Button : Press to exit the current  
3. Press the ENTER button to select Start.  
menu.  
4. Press the ▲▼ buttons to select the desired  
item, and then press the ENTER button.  
5. Press the EXIT button to exit the menu.  
4. Use the ▲▼ buttons to select an Aspect  
Ratio, and then press the ENTER button.  
Home Menu  
5. Select Auto, and then press the ENTER  
button. If you do not have a home  
network, press the BLUE (D) button on  
your remote. You will go directly to the  
Home menu.  
NOTE  
2
The access steps may differ depending on the  
menu you selected. The OSD (On Screen Display)  
may change in this player after you upgrade the  
software version.  
If you leave the player in the stop mode for more  
than 5 minutes without using it, a screen saver  
will appear on your TV. If the player is left in the  
screen saver mode for more than 25 minutes,  
the power will automatically turn off.  
YouTube  
6. The Blu-ray player automatically verifies  
your wired network. When verification  
in complete, the screen displays “Your  
network is operating properly.” Press the  
ENTER button.  
3
4
Videos  
1
5
6
No Disc  
a
Change Device  
d
View Devices  
Enter  
"
12  
1080p : Outputs 1080 lines of progressive  
720p : Outputs 720 lines of progressive  
video.  
BD Wise (Samsung Players only)  
Display  
video.  
576p/480p : Outputs 576/480 lines of  
BD Wise is Samsungs latest inter-connectivity 1080i : Outputs 1080 lines of interlaced  
You can configure various display options  
feature.  
video.  
progressive video.  
such as the TV Aspect Ratio, Resolution, etc.  
When you connect a Samsung player and a  
Samsung TV with BD Wise to each other via  
HDMI, and BD Wise is on in both the player and  
TV, the player outputs video at the video resolution  
and frame rate of the Blu-ray Disc/DVDs.  
Off : The output resolution stays fixed at  
the resolution you set previously in the  
Resolution menu, regardless of the resolution  
of the disc.  
Resolution according to the output mode  
TV Aspect Ratio  
Blu-ray Disc/E-contents/Digital Contents playback  
Depending on the type of television you have,  
you may want to adjust the screen size setting.  
HDMI / connected  
HDMI Mode  
16:9 Original : Select when you connect  
the player to a 16:9 TV screen. The player  
will display all content in its original aspect  
ratio.  
Output  
Setup  
Blu-ray Disc  
E-contents/Digital contents  
1080p  
Max. Resolution of TV input  
On : The player outputs video at the original  
resolution and frame rate of the Blu-ray  
Disc/DVDs.  
Content formatted in 4:3 will be displayed  
with black bars on the left and right.  
16:9 Full : Select when you connect the  
player to a 16:9 TV screen. All content will  
fill the full screen. Content formatted in 4:3  
will be stretched.  
BD Wise  
Auto  
Resolution of Blu-ray Disc  
Max. Resolution of TV input  
NOTE  
1080p@60F (Movie  
1080p@60F  
1080p@24F  
1080p@60F  
When BD Wise is on, the Resolution setting  
automatically defaults to BD Wise and BD Wise  
appears in the Resolution menu.  
Frame : Off)  
Movie Frame : Auto  
(24Fs)  
4:3 Letter Box : Select when you connect  
the player to a 4:3 TV screen. The player will  
display all content in its original aspect ratio.  
Content formatted in 16:9 will be displayed  
with black bars on the top and bottom.  
1080p@24F  
If the player is connected to a device that does  
not support BD Wise, you can not use the BD  
Wise function.  
1080i  
720p  
576p/480p  
1080i  
720p  
576p/480p  
1080i  
720p  
576p/480p  
For proper operation of BD Wise, set the BD Wise  
4:3 Pan-Scan : Select when you connect  
the player to a 4:3 TV screen. 16:9 content  
will have the extreme left and right portions  
cut off.  
menu of both the player and the TV to On.  
Resolution  
DVD playback  
Lets you set the output resolution of the HDMI  
video signal to Auto, 1080p, 1080i, 720p or  
576p/480p. The number indicates the number  
of lines of video per frame. The i and p indicate  
interlaced and progressive scan, respectively.  
The more lines, the higher the quality.  
HDMI / connected  
HDMI Mode  
576i/480i  
Max. Resolution of TV input  
NOTE  
Output  
Setup  
Depending on the disc type, some aspect ratios  
may not be available.  
BD Wise  
Auto  
If you select an aspect ratio and option which is  
different than the aspect ratio of your TV screen,  
then the picture might appear to be distorted.  
If you select the 4:3 Pan-Scan or 4:3 Letter  
Box, pressing the FULL SCREEN button on the  
remote will not bring up a full screen picture.  
If you select the 16:9 Original, your TV may  
display 4:3 Pillarbox (black bars on sides of  
picture). If this occurs, pressing the FULL  
SCREEN button on the remote will not bring up  
a full screen picture.  
Auto : Automatically sets the output  
resolution to the connected TVs maximum  
resolution.  
1080p  
1080i  
720p  
1080p  
1080i  
720p  
BD Wise : Automatically sets the resolution  
to the resolution of the Blu-ray Disc/DVDs  
if you have connected the player via HDMI  
to a TV with the BD Wise feature. (The BD  
Wise menu item appears only if BD Wise is  
set to On. See BD Wise above.)  
576p/480p  
576p/480p  
13  
Bitstream (Unprocessed) : Choose if you want  
your receiver to decode all the audio.  
NOTE  
HDMI Color Format  
Audio  
If the TV you connected to the player does not  
Bonusview audio will not be available.  
support Movie Frame or the resolution you  
selected, the message “If no pictures are shown  
after selecting ‘Yes’, please wait for 15 seconds  
to return to the previous resolution. Do you want  
to change the resolution?” appears. If you select  
Yes, the TV’s screen will go blank for 15 seconds,  
and then the resolution will revert to the previous  
resolution automatically.  
Lets you set the color space format for  
HDMI output to match the capabilities of the  
connected device (TV, monitor, etc).  
Digital Output  
Bitstream (Re-encoded DTS) : The original  
audio will be re-encoded into DTS.  
Set the Digital Output to match the capabilities of  
the AV receiver you’ve connected to the player :  
Bitstream (Re-encoded Dolby D) : The original  
Auto : Automatically sets the player to the  
audio will be re-encoded into Dolby Digital.  
optimum format supported by your device.  
PCM : This is the default setting. It is compatible  
For more details, please refer to the Digital Output  
Selection table.  
YCbCr (4:4:4) : If your TV supports the  
YCbCr color space via HDMI, select this to  
output the normal YCbCr color gamut.  
Diwgiitthaml oOsut TtVpsuatnSderelceecivteiro. n  
If the screen stays blank after you have changed  
the resolution, remove all discs, and then press and  
RGB (Standard) : Select to output the  
normal RGB color gamut.  
hold the PLAY/PAUSE  
(
)
button on the front of  
Bitstream  
Bitstream  
Bitstream  
the player for more than 5 seconds. All settings are  
restored to the factory default. Follow the steps on  
the previous page to access each mode and select  
the Display Setup that your TV will support.  
RGB (Enhanced) : If you have connected  
the player to a DVI display device such as a  
monitor, select this to output the enhanced  
RGB color gamut.  
Setting  
PCM  
(Re-encoded (Re-encoded  
(Unprocessed)  
DTS)  
Dolby D)  
HDMI  
HDMI  
HDMI  
HDMI  
When the factory default settings are restored, all  
stored user BD data is deleted.  
supported  
supported  
supported  
supported  
Connection  
Coaxial  
Coaxial  
AV receiver or AV receiver or  
AV  
HDMI Deep Color  
AV receiver  
The Blu-ray Disc must have the 24 frame feature  
for the player to use the Movie Frame (24Fs) mode.  
Coaxial  
Coaxial  
receiver  
Lets you output video from the HDMI OUT jack with  
Deep Color. Deep Color provides more accurate  
color reproduction with greater color depth.  
Auto : The player outputs video with Deep  
Color to a connected TV which supports  
HDMI Deep Color.  
Up to PCM  
Re-encoded  
PCM  
PCM 2ch  
PCM  
PCM 2ch DTS re-encoded  
7.1ch  
Dolby Digital *  
Movie Frame (24Fs)  
Re-encoded  
Setting the Movie Frame (24Fs) feature to Auto  
allows you to adjust the players HDMI output to  
24 frames per second for improved picture quality.  
You can enjoy the Movie Frame (24Fs) feature  
only on a TV supporting this frame rate.  
You can select Movie Frame only when the  
player is in the HDMI 1080i or 1080p output  
resolution modes.  
Dolby Digital PCM 2ch  
PCM 2ch Dolby Digital Dolby Digital DTS re-encoded  
Dolby Digital  
Dolby Digital *  
Dolby Digital  
PCM 2ch  
Plus  
Re-encoded  
Off : The picture is output without Deep Color.  
PCM 2ch  
Dolby Digital DTS re-encoded  
Plus  
Dolby Digital *  
Audio  
Stream on  
Blu-ray  
Disc  
Progressive Mode  
Re-encoded  
Dolby TrueHD PCM 2ch  
PCM 2ch Dolby TrueHD Dolby Digital DTS re-encoded  
Dolby Digital *  
Lets you improve picture quality when viewing DVDs.  
Auto : Select to have the player  
Re-encoded  
Auto : Movie Frame (24Fs) functions work.  
DTS  
PCM 2ch  
PCM 2ch  
DTS  
DTS  
DTS  
DTS re-encoded  
DTS re-encoded  
DTS re-encoded  
Dolby Digital *  
automatically select the best picture quality  
for the DVD you’re watching.  
Off : Movie Frame (24Fs) functions are off.  
Re-encoded  
DTS-HD HRA PCM 2ch  
DTS-HD MA PCM 2ch  
PCM 2ch DTS-HD HRA  
PCM 2ch DTS-HD MA  
Video : Select for the best picture quality  
from concert or TV show DVDs.  
Dolby Digital *  
Re-encoded  
DTS  
Dolby Digital *  
PCM  
PCM 2ch  
PCM 2ch  
PCM 2ch  
PCM 2ch  
PCM 2ch  
Dolby Digital  
DTS  
PCM 2ch  
Dolby Digital  
DTS  
Audio  
Stream on Dolby Digital PCM 2ch  
PCM 2ch Dolby Digital Dolby Digital  
PCM 2ch DTS DTS  
DVD  
DTS  
PCM 2ch  
14  
Dynamic Range Control  
PCM Downsampling  
Bitstream  
Bitstream  
Bitstream  
Setup  
PCM  
(Re-encoded (Re-encoded  
(Unprocessed)  
DTS)  
Dolby D)  
You can listen at low volumes, but still hear  
dialog clearly.  
Lets you set 48kHz and 96kHz PCM down-  
sampling on or off.  
HDMI  
AV  
HDMI  
HDMI  
This is only active if your player detects a  
HDMI  
Off : Select when the AV receiver  
connected to the player is 96kHz  
compatible.  
supported  
supported  
supported  
receiver  
supported  
Connection  
Coaxial  
Coaxial  
Dolby Digital signal.  
AV receiver or AV receiver or  
AV receiver  
Coaxial  
Coaxial  
Auto : The Dynamic Range Control will be  
set automatically based on the information  
provided by the Dolby TrueHD Soundtrack.  
Off : You can enjoy the movie with the  
standard Dynamic Range.  
On : Select when the AV receiver  
connected to the player is not 96kHz  
compatible. 96kHz signals will be down  
Decodes the main  
feature audio  
Decodes the main  
feature audio  
and BONUSVIEW  
audio stream  
Outputs only the main  
and BONUSVIEW  
converted to 48kHz  
.
Decodes the main feature feature audio stream so that audio stream  
audio and BONUSVIEW your AV receiver can decode together into PCM  
together into PCM  
audio and adds  
Navigation Sound  
Effects, then re-  
encodes the PCM  
audio into Dolby  
digital bitstream  
or PCM.  
Definition  
On : When Movie soundtracks are played  
at low volume or through smaller speakers,  
the system can apply appropriate  
NOTE  
for Blu-ray  
Disc  
Any  
audio stream together  
into PCM audio and adds  
Navigation Sound Effects.  
the audio bitstream.  
You will not hear  
audio and adds  
Navigation Sound  
Effects, then re-  
Even when PCM Downsampling is set to Off,  
BONUSVIEW audio or  
some discs will only output downsampled audio  
through the coaxial digital outputs.  
Navigation Sound Effects. encodes the PCM  
compression to make low-level content  
more intelligible and prevent dramatic  
passages from getting too loud.  
audio into DTS  
bitstream.  
HDMI  
* If the Source Stream is 2ch, “Re-encoded Dolby D” Setting is not applied. Output will be  
If your TV is not compatible with  
compressed multi-channel formats (Dolby  
Digital, DTS), the player may output PCM  
2ch downmixed audio even though you  
selected Bitstream (either Re-encoded or  
Unprocessed) in the setup menu.  
LPCM 2ch.  
Downmixing Mode  
Blu-ray Discs may include three audio  
streams :  
If the HDMI device (AV receiver, TV) is not  
compatible with compressed formats (Dolby  
digital, DTS), the audio signal outputs as PCM.  
Regular DVDs do not have BONUSVIEW audio  
and Navigation Sound Effects.  
Select Downmix method for stereo output.  
Normal Stereo : Downmix the multichannel  
audio into normal stereo. Choose this if you  
hear the sound from TV or Stereo Amplifier.  
Surround Compatible : Downmix  
the multichannel audio into surround  
compatible stereo. This mode helps your  
AV Receiver to decode stereo into surround  
sound.  
-
Main Feature Audio : The audio soundtrack  
of the main feature.  
-
BONUSVIEW audio : An additional  
soundtrack such as the director or actors  
commentary.  
If your TV is not compatible with PCM  
sampling rates over 48kHz, the player may  
output 48kHz downsampled PCM audio  
even though you set PCM Downsampling  
to Off.  
Some Blu-ray Discs do not have BONUSVIEW  
audio and Navigation Sound Effects.  
This Digital Output setup does not affect the  
HDMI audio output to your TV. It affects the  
coaxial and HDMI audio output when your player  
is connected to an AV receiver.  
-
Navigation Sound Effects : When you  
choose a menu navigation selection, a  
Navigation Sound Effect may sound.  
Navigation Sound Effects are different on  
each Blu-ray Disc.  
If you play MPEG audio soundtracks, the audio  
signal outputs as PCM regardless of your Digital  
Output selections (PCM or Bitstream).  
NOTE  
Be sure to select the correct Digital Output or  
you will hear no sound or just loud noise.  
15  
5. The Auto Function acquires and fills in the  
values for IP Address, Subnet Mask,  
etc., automatically.  
12. Enter the numbers as above.  
13. Press the RETURN button on your  
remote.  
ƒ Windows 7  
Network  
1. Click the Network icon on the bottom right  
of the Windows desktop.  
Please contact your ISP to find out if your IP  
address is static or dynamic. If it is dynamic  
-and most are- we recommend using the  
Auto procedure for network setup. This is  
easiest and will work in the majority of cases.  
If it is static, you must use the manual set up  
procedure.  
14. Run a Network Test to ensure the player  
2. In the pop-up menu, click Network and  
NOTE  
NethwasocroknTneecstetd to your network.  
Sharing Center.  
This process can take up to five minutes.  
3. On the dialog that appears, click the Local  
Area Connection or Wireless Network  
Connection depending on your network  
connection.  
6. After the Network Function has acquired  
the network values, press the RETURN  
button.  
Use this menu item to connect to the wired  
network or check whether your network  
connection is working or not.  
4. On the Support tab, click the Details  
button. The Network settings are  
displayed.  
7. Select Network Test, and then press  
ENTER to ensure the player has connected  
to your network.  
Network setup directions start below.  
NOTE  
To enter the Network Settings into your  
Network Status  
8. When the Network Test is complete, press  
the RETURN twice to return to the Main  
Menu.  
This unit can only be connected to a Network via  
a wired connection.  
player, follow these steps:  
Use to check whether a connection to  
the network and the Internet have been  
established.  
1. In the Home menu, press the ◄►  
buttons to select Settings, and then  
press the ENTER button.  
9. If the Network Function does not acquire  
the network values, go to the directions for  
Manual Setup.  
Automatic Network Setup  
2. Press the ▲▼ buttons to select Network,  
and then press the ENTER button.  
3. Press the ▲▼ buttons to select Wired  
Network Settings, and then press the  
ENTER button. The Wired Network  
Settings screen appears.  
1. In the Home menu, press the ◄► buttons  
to select Settings, and then press the  
ENTER button.  
BD-LIVE Internet Connection  
Manual Network Setup  
Set to allow or prohibit an Internet connection  
when you use the BD-LIVE service.  
2. Press the ▲▼ buttons to select Network,  
and then press the ENTER button.  
3. Press the ▲▼ buttons to select Wired  
Network Settings, and then press the  
ENTER button. The Wired Network  
Setting screen appears  
Before you start manual network setup, you  
need the network setting values.  
Allow (All) : The Internet connection is  
4. Select the Internet Protocol Setup field,  
and then press the ENTER button.  
5. Press the ▲▼ buttons to select Manual,  
and then press the ENTER button.  
6. Press the ▼ button to go to the first entry  
field (IP Address).  
allowed for all BD-LIVE contents.  
To get the Network setting values through  
most Windows computers, follow these  
steps:  
Allow (Valid Only) : The Internet  
connection is allowed only for BD-LIVE  
contents containing a valid certificate.  
Prohibit : No Internet connection is allowed  
for any BD-LIVE content.  
ƒ Windows XP  
Settings  
Wired Network Settings  
Displa
7. Use the number buttons on your remote  
1. Right click the Network icon on the bottom  
Internet Protocol Setup  
IP Address  
:
:
:
:
Auto  
\
Audio  
to enter numbers.  
0
0
0
0
0
0
0
0
0
right of the Windows desktop.  
0
0
0
Netwo
Syste
NOTE  
Subnet Mask  
8. When done with each field, use the ►  
button to move to the next field. You can  
also use the other arrow buttons to move  
up, down, and back.  
2. In the pop-up menu, click Status.  
Gateway  
Langu
What is a valid certificate?  
SecurDNS  
:
Auto  
3. On the dialog that appears, click the  
GenerDNS Server  
Suppo
:
0
0
0
0
When the player uses BD-LIVE to send the disc data  
and a request to the server to certify the disc, the  
server uses the transmitted data to check if the disc  
is valid and sends the certificate back to the player.  
The Internet connection may be restricted while  
you are using BD-LIVE contents.  
Support tab.  
>
Move  
"
Select  
'
Return  
4. On the Support tab, click the Details  
button. The Network settings are  
displayed.  
9. Enter the IP Address, Subnet Mask,  
and Gateway values in the same way.  
10. Press the ▼ button to go to DNS.  
11. Press the ▼ button to go to the first DNS  
entry field.  
4. In the Internet Protocol Setup field, select  
Auto if it is not selected. (Press ENTER  
select AUTO, and then press ENTER.)  
16  
BD Data Management  
DVD Parental Rating  
System  
Language  
Enables you to manage the downloaded  
contents you accessed through a Blu-ray disc  
that supports the BD-LIVE service and stored  
on a flash drive.  
This function works in conjunction with DVDs  
that have been assigned an age rating or  
numeric rating that indicates the maturity  
level of the content. These numbers help you  
control the types of DVDs that your family can  
watch.  
You can select the language you prefer for the  
Initial Settings  
Home menu, disc menu, etc.  
On-Screen Menu : Select the language for  
the on-screen displays.  
By using the Initial Settings function, you can  
set the language, Network Settings, etc.  
For more information about the Initial Settings  
function, refer to the Initial Settings section of  
this user manual (page 12).  
You can check the devices information  
Disc Menu : Select the language for the  
disc menu displays.  
including the storage size, delete the BD  
Select the rating level you want to set.  
For example, if you select Level 6, discs rated  
above 6 - Level 7 and 8 - will not play.  
A larger number indicates more mature  
content.  
data, or change the Flash memory device.  
Audio : Select the language for disc audio.  
BD Data Management Screen Information :  
Total Size : Total memory size of the device.  
Available Size : Available memory in the  
device.  
Subtitle : Select the language for disc subtitles.  
NOTE  
Anynet+(HDMI-CEC)  
The selected language will only appear if it is  
supported on the disc.  
Anynet+ is a convenient function that offers linked  
operations with other Samsung players that have  
the Anynet+ feature.  
YouTube Lock  
NOTE  
Restrict the use of the YouTube service unless  
a password is entered.  
In the external memory mode, disc playback  
may be stopped if you disconnect the USB  
device in the middle of playback.  
Security  
To operate this function, connect this player to an  
Anynet+ Samsung TV with an HDMI cable.  
With Anynet+ on, you can operate this player  
using a Samsung TV remote control and start  
disc playback simply by pressing the PLAY  
Off : Turn Off YouTube lock.  
When you access this function for the first time,  
the password setup screen appears. Enter a  
desired 4-digit password using the number  
buttons. (The default password is 0000.)  
On : Turn On YouTube lock.  
Only those USB devices formatted in FAT file  
format (DOS 8.3 volume label) are supported.  
We recommend you use USB devices that  
support USB 2.0 protocol with 4 MB/sec or  
faster read/write speed.  
Change PIN  
(
) button on the TVs remote control.  
Change the 4-digit password used to access  
security functions.  
For more information, please see the TV user  
BD Parental Rating  
manual.  
The Resume Play function may not work after  
you format the storage device.  
Prevent playback of Blu-ray Discs with specific  
age ratings unless a password is entered.  
If you forgot your password  
Off : Anynet+ functions will not work.  
On : Anynet+ functions will work.  
The total memory available to BD Data  
Management may differ, depending on the  
conditions.  
1. Remove any discs.  
Off : BD Parental Rating is not active and  
2. Press and hold the PLAY/PAUSE  
(
)
NOTE  
all Blu-ray discs will play in full.  
button on the front panel for 5 seconds or  
This function is not available if the HDMI cable  
does not support CEC.  
On : This will prohibit playback of Blu-ray  
disc rated above Parental Rating.  
more.  
All settings will revert to the factory settings.  
DivX® Video On Demand  
If your Samsung TV has an Anynet+ logo, then  
it supports the Anynet+ function.  
NOTE  
View DivX® VOD Registration Codes to  
purchase and play DivX® VOD contents.  
When the factory default settings are restored,  
all the user stored BD data will be deleted.  
Depending on your TV, certain HDMI output  
resolutions may not work.  
Please refer to the user manual of your TV.  
17  
Never turn the player off or back on manually  
during the update process.  
Auto Upgrade Notification  
Contact Samsung  
General  
If you have connected the player to your  
network, and then set Auto Upgrade  
Notification on, the player automatically  
notifies you when a new software version is  
available for the player.  
Samsung Electronics shall take no legal  
responsibility for player malfunction caused by  
an unstable Internet connection or consumer  
negligence during a software upgrade.  
If you want to cancel the upgrade while the  
upgrade software is downloading, press the  
ENTER button.  
Provides contact information for assistance  
with your player.  
Time Zone  
You can specify the time zone that is  
applicable to your area.  
Terms of Service Agreement  
To set Auto Upgrade Notification on, follow  
these steps:  
View the general disclaimer regarding third  
party contents and services.  
1. Select Auto Upgrade Notification, and  
then press the ENTER button.  
Support  
By USB  
2. Use the ▲▼ buttons to select On, and then  
press the ENTER button.  
Reset  
To upgrade by USB, follow these steps:  
Software Upgrade  
2. Download the latest USB software  
upgrade zip archive to your computer.  
3. Unzip the zip archive to your computer.  
You should have a single RUF file with the  
same name as the zip file.  
If there is a new software version available,  
the player notifies you with a popup message.  
All settings will revert to the default except for  
the network settings.  
The Software Upgrade menu allows you to  
upgrade the players software for performance  
improvements or additional services.  
1. To upgrade the firmware, select Yes on the  
Pop-up. The player turns off automatically,  
then restarts, and begins the download.  
(Never turn on the player manually here.)  
2. The update progress popup appears.  
3. When the update is complete, the player  
turns off again automatically.  
By Online  
4. Copy the RUF file to a USB flash drive.  
5. Make sure there is no disc in the player,  
and then insert the USB flash drive into the  
USB port of the player.  
To upgrade By Online, follow these steps:  
1. Select By Online, and then press the  
ENTER button. The Connecting to Server  
message appears.  
6. In the players menu, go to Settings >  
Support > Software Upgrade.  
4. Press the POWER button to turn on the  
player.  
2. A popup message will appear if an update  
7. Select By USB.  
is available.  
NOTE  
3. If you select Yes, the player will turn off  
automatically before restarting.  
(Never turn the player on during an  
upgrade.)  
NOTE  
Update is complete when the player turns off  
after restarting. Press the POWER button to turn  
on the updated player for your use.  
No disc should be inserted in the product when  
you upgrade the software using the USB Host  
jack.  
Never turn the player off or on manually during  
the update process.  
4. The update progress popup will appear.  
When the update is completed, the player  
will turn back off automatically.  
5. Press the POWER button to turn on the  
player.  
When the software upgrade is done, check the  
software details in the software Upgrade menu.  
Do not turn off the player during the software  
upgrade. It may cause the player to malfunction.  
Software upgrades using the USB Host jack  
must be performed with a USB flash memory  
stick only.  
Samsung Electronics shall take no legal  
responsibility for player malfunction caused by  
an unstable Internet connection or consumer  
negligence during software upgrade.  
NOTE  
The Update is complete when the player turns  
off after restarting. Press the POWER button to  
turn on the updated player for your use.  
18  
Using the Title Menu  
Using the Search and Skip Functions  
Basic Functions  
During play, you can search quickly through a  
chapter or track, and use the skip function to  
jump to the next selection.  
Playing a Video  
Z
title 1  
title 2  
chapter 1 chapter 2 chapter 1 chapter 2 chapter 3  
TIPTLOEPMUEPNU  
1. During playback, press the TITLE  
MENU button on the remote control.  
2. Press the ▲▼◄► buttons to make  
the desired selection, then press the  
ENTER button.  
Playback  
Searching for a Desired Scene  
hzZ�  
1. Press the OPEN/CLOSE  
(
)
button to  
Audio CD (CD-DA)  
open the disc tray.  
2. Place a disc gently into the tray with the  
NOTE  
During playback, press the SEARCH (  
)
track 1  
track 2  
track 3  
track 4  
track 5  
file 3  
discs label facing up.  
Depending on the disc, the menu items may  
button.  
3. Press the OPEN/CLOSE (  
) button  
differ or this menu may not be available.  
Each time you press the SEARCH (  
)
to close the disc tray.  
button, the playback speed will change as follows:  
4. Press the PLAY (  
) button.  
Playing the Title List  
MP3, WMA, DivX, MKV and MP4  
BD-ROM,  
)
1   
)
2 ) 3   
Playback related buttons  
BD-RE/-R,  
DVD-RW/-R,  
DVD+RW/+R,  
DVD-VIDEO  
) 4 ) 5 ) 6 ) 7  
folder (group) 1  
folder (group) 2  
z
file 1 file 2  
file 1  
file 2  
(
1   
(
2 ( 3   
Starts playback.  
Stops playback.  
PLAY (  
)
DISC MENU  
1. During playback, press the DISC  
MENU or TITLE MENU button.  
( 4 ( 5 ( 6 ( 7  
2. Press the ▲▼ buttons to select an  
entry you want to play from the TitleTITLE MENU  
)
(
1   
)
(
2   
)
(
3
3
DivX, MKV,  
If you press the button once : The  
stop position is memorized.  
POPUP  
MP4  
1   
2   
STOP (  
)
List, and then press the ENTER  
If you press the button twice : The  
Using the Disc Menu/Title Menu/  
Popup Menu  
button.  
NOTE  
To return to normal speed playback, press  
stop position is not memorized.  
the PLAY (  
) button.  
Pauses playback.  
PAUSE (  
)
If your disc has a playlist, press the GREEN (B)  
NOTE  
Using the Disc Menu  
button to go to the playlist.  
The player does not play sound in search mode.  
NOTE  
Using the Popup Menu  
For some discs, pressing the STOP (  
)
button  
hZ  
Skipping Chapters  
once may not memorize the stop position.  
DISC MENU  
Video files with high bit rates of 20Mbps or  
more strain the player’s capabilities and may  
stop playing during playback.  
1. During playback, press the DISC  
h
MENU button on the remote  
hzZ��  
TIPTLOEPMUEPNU  
1. During playback, press the POPUP  
MENU button on the remote control.  
2. Press the ▲▼◄► buttons or ENTER  
button to select the desired menu.  
control.  
During playback, press the SKIP (  
)
2. Press the ▲▼◄► buttons to make a  
selection, and then press the ENTER button.  
button.  
Disc Structure  
If you press the SKIP (  
If you press the SKIP (  
) button, the  
disc moves to the next chapter.  
NOTE  
NOTE  
The content of discs are usually divided as  
shown below.  
) button, the  
Depending on the disc, the menu items may  
differ or this menu may not be available.  
Depending on the disc, the menu items may  
disc moves to the beginning of the chapter.  
One more press makes the disc move to  
the beginning of the previous chapter.  
differ or this menu may not be available.  
Blu-ray Disc, DVD-VIDEO  
19  
3. Press the REPEAT A-B button at the point  
where you want repeat play to stop (B).  
4. To return to normal play, press the REPEAT  
A-B buttons to select Off.  
Some Blu-ray Discs may allow you to select  
either the PCM or Dolby digital audio soundtrack  
in English.  
Moving to a Desired Scene  
Directly  
Slow Motion Play/Step Motion Play  
Slow Motion Play  
If you press the AUDIO button on the remote  
control, the Audio bar appears.  
hzZ�  
NOTE  
Press the RETURN button to remove the Audio bar.  
1. During playback, press the TOOLS button.  
2. Press the ▲▼ buttons to select Title,  
Chapter or Playing Time.  
hzZ��  
If you set point (B) less than 5 seconds of  
playing time after point (A), a prohibition  
message appears.  
Selecting the Subtitle Language  
hZ�  
In pause mode, press the SEARCH (  
)
button.  
3. Press the ◄► or number button to select  
the desired Title, Chapter or Playing Time,  
then press the ENTER button.  
Depending on the disc, the menu items may  
differ and this menu may not be available.  
Each time you press the SEARCH (  
)
button, the playback speed will change as  
follows:  
*
1/8  
*
1/4  
*
1/2  
SUBTITLE  
You can also operate this function  
To return to normal speed playback, press  
Selecting the Audio Language  
hzZ�  
by pressing the SUBTITLE  
Repeating the Title or Chapter  
the PLAY (  
) button.  
button on the remote control.  
NOTE  
hzZ�  
1. During playback, press the TOOLS button.  
2. Press the ▲▼ buttons to select Subtitle.  
3. Press the ◄► buttons to select the  
desired subtitle language.  
The player does not play sound in Slow mode.  
AUDIO  
Lets you repeat the disc title or chapter.  
Depending on the disc, the Repeat function  
may not be available.  
You can also operate this function  
by pressing the AUDIO button on  
Step Motion Play  
the remote control.  
REPEAT  
1. During playback, press the  
NOTE  
hzZ��  
In pause mode, press the PAUSE (  
REPEAT button.  
1. During playback, press the TOOLS button.  
2. Press the ▲▼ buttons to select Audio.  
3. Press the ◄► buttons to select the  
desired audio language.  
Depending on the Blu-ray Disc / DVD, you may  
be able to select the desired subtitle in the Disc  
Menu. Press the DISC MENU button.  
2. Press the ▲▼ buttons to select  
Chapter or Title, then press the  
ENTER button.  
)
button.  
This function depends on the selection of  
subtitles that are encoded on the disc and may  
not be available on all Blu-ray Discs/DVDs.  
Each time you press the PAUSE (  
button, a new frame appears.  
)
3. To return to normal play, press the  
REPEAT button again.  
NOTE  
To return to normal speed playback, press  
4. Press the ▲▼ buttons to select Off, then  
The ◄► indicator will not appear on the screen  
if the BONUSVIEW section does not contain any  
BONUSVIEW audio settings.  
A Blu-ray Disc can contain up to 255 subtitle  
the PLAY (  
) button.  
press the ENTER button.  
languages and a DVD up to 32.  
Information about the main feature/BONUSVIEW  
NOTE  
Information about the main feature/BONUSVIEW  
mode will also appear if the Blu-ray Disc has a  
BONUSVIEW section.  
Repeating a Section  
mode will also appear if the Blu-ray Disc has a  
The player does not play sound in step mode.  
BONUSVIEW section.  
This function changes both the primary and  
secondary subtitles at the same time.  
The total number of primary and secondary  
subtitles are displayed respectively.  
If you press the SUBTITLE button on the remote  
control, the subtitle bar appears.  
Press the ◄► button to switch between main  
feature and BONUSVIEW audio modes.  
This function depends on the selection of audio  
languages encoded on the disc and may not be  
available.  
hzZ�  
Using the TOOLS button  
REPEAT  
1. During playback, press the REPEAT  
A-B button.  
A-B  
During playback, you can operate  
the disc menu by pressing the  
TOOLS button.  
2. Press the REPEAT A-B button at the  
point where you want repeat play to  
start (A).  
A Blu-ray Disc can contain up to 32 audio  
languages and a DVD up to 8.  
Press the RETURN button to remove the subtitle  
bar.  
NOTE  
Depending on the disc, the Tools menu may  
differ.  
20  
Repeat Modes :  
Audio CD (CD-DA)/MP3 Screen  
Elements  
Setting BONUSVIEW  
Changing the Camera Angle  
Tracks on a disc are  
played in the order  
Audio CD  
h
Off  
hZ  
(CD-DA)/MP3 in which they were  
1
2
3
The BONUSVIEW feature allows you to view  
additional content (such as commentaries)  
in a small screen window while the movie is  
playing.  
When a Blu-ray Disc/DVD contains multiple  
angles of a particular scene, you can use the  
ANGLE function.  
recorded on the disc.  
Current track is  
repeated.  
Playlist  
1/6  
Audio CD  
(CD-DA)  
TRACK 001  
(
(
(
) Track  
) One  
) All  
TRACK 001  
TRACK 002  
TRACK 003  
TRACK 004  
TRACK 005  
TRACK 006  
05:57  
04:27  
04:07  
1. During playback, press the TOOLS button.  
2. Press the ▲▼ buttons to select Angle.  
3. Press the ◄► buttons to select the  
desired Angle.  
This function is only available if the disc has  
the Bonusview feature.  
Current track is  
MP3  
7
6
03:41  
repeated.  
+
00:08 / 05:57  
03:17  
1. During playback, press the  
Audio CD  
All tracks are  
03:35  
TOOLS button.  
(CD-DA)/MP3 repeated.  
Pause  
Tools  
Return  
"
'
CD  
Selecting the Picture Settings  
hzZ�  
2. Press the ▲▼ buttons to  
select BONUSVIEW Video or  
BONUSVIEW Audio.  
The random option  
Audio CD  
plays a disc’s tracks  
in random order.  
(
)Shuffle  
5
4
(CD-DA)/MP3  
3. Press the ◄► buttons to select the  
desired Bonusview.  
This function enables you to adjust video  
Displays the music information.  
Displays the playlist.  
Display the current track/total tracks.  
Displays buttons available.  
Shows the current play time/total play time.  
Displays the current playback status.  
Displays the repeated playback status.  
1
2
3
4
5
6
7
quality when the player is connected to a TV.  
Playlist  
NOTE  
1. During playback, press the TOOLS button.  
If you switch from BONUSVIEW Video,  
BONUSVIEW Audio will change automatically in  
accordance with BONUSVIEW Video.  
1. Insert an Audio CD (CD-DA) or an MP3  
Disc into the disc tray.  
2. Press the ▲▼ buttons to select Picture  
Setting, and then press the ENTER  
button.  
For an Audio CD (CD-DA), the first track  
plays automatically.  
3. Press the ◄► buttons to select the  
Listening to Music  
For an MP3 disc, press the ◄► buttons  
to select Music, then press the ENTER  
button.  
desired Picture Setting  
.
Dynamic : Choose this setting to  
Playing an Audio CD (CoD-DA)/MP3  
2. To move to the Music List, press the  
increase Sharpness.  
STOP (  
) or RETURN button.  
Normal : Choose this setting for most  
The Music List screen appears.  
3. Press the ▲▼◄► buttons to move to a  
desired track, then press the YELLOW (C)  
button to check the desired track.  
Repeat this procedure to select additional  
tracks.  
viewing applications.  
Repeat an Audio CD (CD-DA)/  
MP3  
Movie : This is the best setting for  
1. Insert an Audio CD (CD-DA) or an MP3  
watching movies.  
Disc into the disc tray.  
User : Lets you adjust the sharpness  
and noise reduction function  
respectively.  
For an Audio CD (CD-DA), the first  
track plays automatically.  
1. During the Playlist playback, press  
For an MP3 disc, press the ◄►  
buttons to select Music, then press  
the ENTER button.  
the TOOLS button.  
4. If you want to remove a track from the  
playlist, go to the track, and then press the  
YELLOW (C) button again. The track is  
removed.  
2. Select Repeat Mode, and then  
press the ◄► buttons to select  
the desired repeat mode.  
NOTE  
When you use BD wise function, this menu will  
not appear.  
2. Press the ▲▼ buttons to select the track  
you want to play, and then press the  
ENTER button.  
5. Press the ENTER button to play the  
selected tracks.  
3. Press the ENTER button  
.
The selected tracks will play automatically.  
21  
Background Music : Select to listen to  
6. To go to the Music List, press the STOP (  
)
Playing back a USB Storage Device  
YouTube  
music while viewing a slide show.  
or RETURN button.  
Zoom : Select to enlarge the current  
7. To go to the Playlist, press the ENTER  
You can use the USB connection to play  
multimedia files (MP3, JPEG, DivX, etc) located  
on a USB storage device.  
picture. (Enlarged up to 4 times)  
button.  
Rotate : Select to rotate the picture. (This  
will rotate the picture either clockwise or  
counter clockwise.)  
NOTE  
1. Move to the Home menu.  
2. In Stop mode, connect the USB storage  
device to the USB port on the front panel  
of the player.  
You can create a playlist with up to 99 tracks on  
Audio CDs (CD-DA).  
Information : Shows the picture information  
123  
d
Home  
Enter  
"
including the name and size, etc.  
-1  
5 . Press the ◄► buttons to select USB,  
The message “Do you want to access the  
device?” will be displayed.  
NOTE  
Playing back Pictures  
then press the ENTER button.  
To enable the background music function, the  
-1  
6 . Press the ▲▼ buttons to select the  
3. Press the ◄► button to select Yes, then  
photo file must be in the same storage media as  
the music file. However, the sound quality can  
be affected by the bit rate of the MP3 file, the  
size of the photo, and the encoding method.  
desired Videos, Music or Photos, then  
G
press the ENTER button.  
press the ENTER button.  
4. Press the RED (A) button or BLUE (D)  
button.  
Playing JPEG files  
7. For playing back Video, Music or Photo  
files see pages 19~22.  
If you pressed the RED (A) button, go to  
1. Insert a JPEG disc into the disc tray.  
2. Press the ◄► buttons to select Photos,  
and then press the ENTER button.  
3. Press the ▲▼◄► buttons to select the  
folder you want to play, and then press the  
ENTER button.  
Start Slide Show and Stop Slide Show alternate,  
depending on whether you are running a slide  
show or not.  
Step 5.  
NOTE  
If you pressed the BLUE (D) button, go to  
You must remove the USB storage device  
safely (by performing the “Safely Remove USB”  
function) in order to prevent possible damage  
to the USB memory. Press the MENU button to  
move to the Home menu, select the YELLOW (C)  
button, and then press the ENTER button.  
When the Audio-CD (CD-DA), MP3 or JPEG files  
are in stop mode, pressing the FULL SCREEN  
button on the remote will not bring up a full  
screen picture.  
-1  
Step  
4
.
Playing Selected Photos  
YouTube  
You can select spesific photos to play pressing  
the YELLOW (C) button on your remote. To  
select specific photos, follow these steps:  
4. Press the ▲▼◄► buttons to select the  
photo you want to play, and then press the  
ENTER button.  
1. Select the folder that contains the photos  
you want to view, and then press the  
ENTER button.  
No Disc  
123  
NOTE  
DLNA  
123  
You can’t enlarge the subtitle and PG graphic in  
a
Change Device  
c
Safely Remove USB  
d
View Devices  
Enter  
"
2. Press the ▲▼◄►buttons to select a  
photo you want to play, and then press  
the YELLOW (C) button. A check mark  
appears on the photo.  
If you insert a disc when playing a USB storage  
device, the device mode changes to “DVD or  
CD” automatically.  
the full screen mod  
e.  
5. Press the ▲▼ buttons to select USB,  
Using the TOOLS button  
then press the ENTER button.  
3. Repeat Step 2 for each photo you want to  
You can use various functions by  
6. Press the ◄► buttons to select the  
desired Videos, Music or Photos, then  
press the ENTER button. Go to Step 7  
play.  
pressing the TOOLS button.  
NOTE  
Start Slide Show : Select to start  
the slide show.  
-1  
To deselect a photo, press the ▲▼◄►buttons  
to highlight the photo, and then press the  
YELLOW (C) button.  
4 . If you pressed the BLUE (D) button, the  
Stop Slide Show : Select if you want to  
-1  
screen below appears. Go to 5 .  
stop the slide show.  
Slide Show Speed : Select if you want to  
4. Press the ENTER button when done. The  
adjust the Slide Show speed.  
slide show starts.  
22  
Appendix  
Network Services  
You can enjoy various network services such  
as BD-LIVE by connecting the player to your  
network.  
Troubleshooting  
Using the AllShare Function  
AllShare lets you play music, video, and photo  
Before requesting service, please try the following solutions.  
files located in your PC or NAS on the player.  
Read the following instructions before  
using any network service.  
PROBLEM  
SOLUTION  
To use AllShare with your player, you must  
connect the player to your network (See  
pages 10~11).  
1. Connecting the player to the network  
No operation can be  
performed with the  
remote control.  
Check the batteries in the remote control. They may need replacing.  
(pages 10 and 11).  
Operate the remote control at a distance of no more than 6,1 m.  
To use AllShare with your PC, you must install  
2. Configuring the network settings  
Remove batteries and hold down one or more buttons for several  
minutes to drain the microprocessor inside the remote control to reset it.  
Reinstall batteries and try to operate the remote control again.  
AllShare software on your PC.  
(page 16).  
If you have NAS, you can use AllShare without  
any additional software.  
Disc does not play.  
Ensure that the disc is installed with the label side facing up.  
BD-LIVE™  
Check the region number of the Blu-ray Disc/DVD.  
To download AllShare software  
Once the player is connected to the network,  
you can enjoy various movie-related service  
contents using a BD-LIVE compliant disc.  
Disc Menu does not  
appear.  
Ensure that the disc has disc menus.  
1. Go to Samsung.com  
2. Click Support, enter your players product  
number in the field that appears, and then  
click Product.  
1. Attach a USB memory stick to the USB  
jack on the side of the player, and then  
check its remaining memory. The memory  
device must have at least 1GB of free  
space to accommodate the BD-LIVE  
services.  
The prohibition message  
This message appears when an invalid button is pressed.  
appears on the screen.  
The Blu-ray Disc/DVDs software doesn’t support the feature (e.g.,  
angles).  
3. On the next screen, click Get downloads  
under Downloads.  
You’ve requested a title or chapter number or search time that is out of  
4. Click Software on the next page.  
5. Click the icon in the AllShare line under File  
to start the download.  
range.  
Play mode differs from the  
Setup Menu selection.  
Some of the functions selected in the Setup Menu may not work properly  
if the disc is not encoded with the corresponding function.  
2. Insert a Blu-ray Disc that supports BD-  
LIVE.  
Playing content located in your PC  
3. Select an item from various BD-LIVE  
service contents provided by the disc  
manufacturer.  
on the Blu-ray Disc Player  
The screen ratio cannot  
The Screen Ratio is fixed on your Blu-ray Disc/DVD.  
be changed.  
This is not a problem with the player.  
You can view shared files of your computer  
to your Blu-ray Disc Player.  
No audio.  
Make sure you have selected the correct Digital Output in the Audio  
Options Menu.  
NOTE  
You can get detailed instructions for using  
The way you use BD-LIVE and the provided contents AllShare from the Samsung.com web site.  
may differ, depending on the disc manufacturer.  
The screen is blocked  
If the HDMI output is set to a resolution your TV cannot support (for  
example, 1080p), you may not see a picture on your TV.  
Press the PLAY/PAUSE (  
) button (on front panel) for more than 5  
Blu-ray Disc Player  
Play back PC’s files  
seconds with no disc inside. All settings will revert to the factory settings.  
When the factory default settings are restored, all stored user BD data is  
AllShare Connection  
deleted.  
23  
PROBLEM  
SOLUTION  
PROBLEM  
BD-LIVE  
SOLUTION  
Forgot password  
Press the PLAY/PAUSE (  
) button (on front panel) for more than  
5 seconds with no disc inside. All settings including the password will  
revert to the factory settings.  
I cannot connect to the BD-  
Check whether the network connection is successful or not by using the Network  
Status menu.  
LIVE server.  
Don’t use this unless absolutely necessary.  
Check whether the USB memory device is connected to the player.  
The memory device must have at least 1GB of free space to accommodate the BD-  
LIVE service.  
When the factory default settings are restored, all stored user BD data  
is deleted.  
If you experience other  
problems.  
Go to the contents and find the section of the user manual that  
contains the explanations regarding the current problem, and follow the  
procedure once again.  
You can check the available size in BD Data Management.  
Check whether the BD-LIVE Internet Connection menu is set to Allow(All).  
If all above fails, contact the contents provider or update the player to the latest  
firmware.  
If the problem still cannot be solved, please contact your nearest  
Samsung authorized service center.  
When using the BD-LIVE  
service, an error occurs.  
The memory device must have at least 1GB of free space to accommodate the BD-  
The picture is noisy or  
distorted  
Make sure that the disc is not dirty or scratched.  
Clean the disc.  
LIVE service.  
You can check the available size in BD Data Management.  
No HDMI output.  
Check the connection between the TV and the HDMI jack of the player.  
Check if your TV supports 576p/480p, 720p, 1080i, 1080p HDMI input  
resolution.  
NOTE  
When the factory default settings are restored, all stored user BD data is deleted.  
Abnormal HDMI output  
screen.  
If random noise appears on the screen, it means that TV does not  
Repairs  
support HDCP (High-bandwidth Digital Content Protection).  
If you contact us to repair your player, an administration fee may be charged if either:  
1. An engineer is called out to your home at your request and there is no defect in the product.  
2. You bring the unit to a repair center and there is no defect in the product.  
We will provide you with the amount of the administration fee before we make a home visit  
or begin any work on your player.  
AllShare function  
I can see folders shared  
through AllShare, but I  
cannot see the files.  
AllShares shows only files corresponding to the Image, Music, and  
Movie categories. Files that do not correspond to these categories may  
not be displayed.  
We recommend you read this manually thoroughly, search for a solution on line at www.  
samsung.com, or contact Samsung Customer Care before seeking to repair your player.  
Video is played  
Check if the network is stable.  
intermittently.  
Check if the network cable is properly connected and if the network is  
not overloaded.  
AllShare connection  
between Player and PC  
is unstable.  
The IP address under the same subnetwork should be unique. If they  
are not, IP interference can cause this phenomenon.  
Check if you have a firewall enabled.  
If so, disable the firewall function.  
24  
Specifications  
Weight  
1.3 Kg  
Dimensions  
360 (W) X 193 (D) X 41 (H) mm  
+5°C to +35°C  
General  
Operating Temperature Range  
Operating Humidity Range  
Type A  
10 % to 75 %  
USB 2.0  
USB  
DC Output  
5V 500mA Max.  
Video  
1080p, 1080i, 720p, 576p/480p  
PCM, Bitstream  
HDMI  
Audio  
Audio Output  
Network  
Digital Audio Output  
Ethernet  
Coaxial  
100BASE - TX Terminal  
-
-
It is not supported when the network speed is below or equal to 10 Mbps.  
Design and specifications are subject to change without prior notice.  
- For the power supply and power consumption, refer to the label attached to the  
product.  
-
Weight and dimensions are approximate.  
25  
Many Blu-ray Disc/DVDs are encoded with copy protection. Because of this, you should only connect  
your Player directly to your TV, not to a VCR. Connecting to a VCR results in a distorted picture from copy-  
protected Blu-ray Disc/DVDs.  
Compliance and Compatibility Notice  
NOT ALL discs are compatible  
Under the U.S. Copyright laws and Copyright laws of other countries, unauthorized recording, use, display,  
distribution, or revision of television programs, videotapes, Blu-ray Discs, DVDs, and other materials may  
subject you to civil and/or criminal liability.  
Subject to the restrictions described below and those noted throughout this Manual, including the Disc Type and  
Characteristics section of this user manual, disc types that can be played are: pre-recorded commercial BD-ROM, DVD-  
VIDEO, and Audio CD (CD-DA) discs; BD-RE/-R, DVD-RW/-R discs; and CD-RW/-R discs.  
Cinavia Notice : This product uses Cinavia technology to limit the use of unauthorized copies of some  
commercially-produced film and videos and their soundtracks. When a prohibitet use of an unauthorized  
copy is detected, a message will be displayed and playback or copying will be interrupted. More information  
cinavia.com. To request additional information about Cinavia by email, send a postcard with your mailing  
address to: Cinavia Consumer Information Center, P.O. Box 86851, San Diego CA, 92138, USA.  
This product incorporates proprietary technology under licence from Verance Corporation and is protected  
by U.S. Patent 7,369,677 and other U.S. and worldwide patens issued and pending as well as copyright  
and trade secret protection for certain aspects of such technology. Cinavia is a trademark of Verance  
Corporation. Copyright 2004-2010 Verance Corporation. All right reserved by Verance. Reverse engineering  
Discs other than the above cannot and/or is not intended to be played by this player. And some of the above discs may  
not play due to one or more reasons provided below.  
Samsung cannot assure that this player will play every disc bearing the BD-ROM, BD-RE/-R,  
DVD-VIDEO, DVD-RW/-R, DVD+RW/+R and CD-RW/-R logos, and this player may not respond to all operating  
commands or operate all features of every disc. These and other disc compatibility and player operation issues with new  
and existing format discs are possible because:  
-
Blu-ray is a new and evolving format and this player may not operate all features of Blu-ray Discs because some  
features may be optional, additional features may have been added to the Blu-ray  
Disc format after the production of this player, and certain available features may be subject to delayed availability;  
-
-
-
-
not all new and existing disc format versions are supported by this player;  
or disassembly is prohibited.  
new and existing disc formats may be revised, changed, updated, improved and/or supplemented;  
some discs are produced in a manner that allows specific or limited operation and feature during playback;  
Network Service Disclaimer  
some features may be optional, additional features may have been added after the production of this player or certain  
available features may be subject to delayed availability;  
All content and services accessible through this device belong to third parties and are protected by copyright,  
patent, trademark and/or other intellectual property laws. Such content and services are provided solely for  
your personal noncommercial use. You may not use any content or services in a manner that has not been  
authorized by the content owner or service provider. Without limiting the foregoing, unless expressly authorized  
by the applicable content owner or service provider, you may not modify, copy, republish, upload, post,  
transmit, translate, sell, create derivative works, exploit, or distribute in any manner or medium any content or  
-
some discs bearing the BD-ROM, BD-RE/-R, DVD-VIDEO, DVD-RW/-R, DVD+RW/+R and  
CD-RW/-R logos may still be non-standardized discs;  
-
-
-
-
some discs may not be played depending on their physical state or recording conditions;  
problems and errors can occur during the creation of Blu-ray Disc, DVD software and/or the manufacture of discs;  
this player operates differently than a standard DVD player or other AV equipment; and/or  
for reasons noted throughout this user manual and for other reason(s) discovered and posted by SAMSUNG  
customer care center.  
services displayed through this device.  
THIRD PARTY CONTENT AND SERVICES ARE PROVIDED “AS IS.” SAMSUNG DOES NOT WARRANT  
CONTENT OR SERVICES SO PROVIDED, EITHER EXPRESSLY OR IMPLIEDLY, FOR ANY PURPOSE.  
SAMSUNG EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO,  
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. SAMSUNG DOES NOT  
GUARANTEE THE ACCURACY, VALIDITY, TIMELINESS, LEGALITY, OR COMPLETENESS OF ANY CONTENT  
OR SERVICE MADE AVAILABLE THROUGH THIS DEVICE AND UNDER NO CIRCUMSTANCES, INCLUDING  
NEGLIGENCE, SHALL SAMSUNG BE LIABLE, WHETHER IN CONTRACT OR TORT, FOR ANY DIRECT,  
INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES, ATTORNEY FEES, EXPENSES, OR  
ANY OTHER DAMAGES ARISING OUT OF, OR IN CONNECTION WITH, ANY INFORMATION CONTAINED IN,  
OR AS A RESULT OF THE USE OF ANY CONTENT OR SERVICE BY YOU OR ANY THIRD PARTY, EVEN IF  
If you encounter disc compatibility or player operation problems, please contact SAMSUNG customer care center.  
You may also contact SAMSUNG customer care center for possible updates on this player.  
For additional information on playback restrictions and disc compatibility, refer to the Precautions, Before Reading the  
user manual, Disc Types and Characteristics, and Before Playing sections of this user manual.  
For Blu-ray Disc Player progressive scan output : CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION  
TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS PRODUCT AND MAY CAUSE ARTIFACTS TO BE DISPLAYED  
IN THE PICTURE. IN CASE OF PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS RECOMMENDED THAT THE USER  
SWITCH THE CONNECTION TO THE ‘STANDARD DEFINITION’ OUTPUT. IF THERE ARE QUESTIONS REGARDING  
OUR TV SET COMPATIBILITY WITH THIS PRODUCT, PLEASE CONTACT OUR CUSTOMER SERVICE CENTER.  
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.  
Third party services may be terminated or interrupted at any time, and Samsung makes no representation  
or warranty that any content or service will remain available for any period of time. Content and services are  
transmitted by third parties by means of networks and transmission facilities over which Samsung has no  
control. Without limiting the generality of this disclaimer, Samsung expressly disclaims any responsibility or  
liability for any interruption or suspension of any content or service made available through this device.  
Copy Protection  
Because AACS (Advanced Access Content System) is approved as content protection system for  
Blu-ray Disc format, similar to use of CSS (Content Scramble System) for DVD format, certain restrictions  
are imposed on playback, analog signal output, etc., of AACS protected contents.  
The operation of this product and restrictions on this product may vary depending on your time of purchase  
as those restrictions may be adopted and/or changed by AACS after the production of this product.  
Furthermore, BD-ROM Mark and BD+ are additionally used as content protection system for Blu-ray Disc  
format, which imposes certain restrictions including playback restrictions for BD-ROM Mark and/or BD+  
protected contents. To obtain additional information on AACS, BD-ROM Mark, BD+, or this product, please  
contact SAMSUNG customer care center.  
Samsung is neither responsible nor liable for customer service related to the content and services. Any  
question or request for service relating to the content or services should be made directly to the respective  
content and service providers.  
26  
License  
Manufactured under license from Dolby Laboratories. Dolby and the double-D  
symbol are trademarks of Dolby Laboratories.  
Manufactured under license under U.S. Patent Nos : 5,956,674; 5,974,380;  
6,487,535 & other U.S. and worldwide patents issued & pending. DTS, the  
Symbol, & DTS and the symbol together are registered trademarks & DTS  
2.0+ Digital Out is a trademark of DTS, Inc. Product includes software.  
© DTS, Inc. All Rights Reserved.  
DivX  
®
-
ABOUT DIVX VIDEO : DivX is a digital video format created by DivX, LLC, a  
subsidiary of Rovi Corporation.  
®
This is an DivX Certified device that plays DivX video.  
®
-
ABOUT DIVX VIDEO-ON-DEMAND : This DivX Certified device must be registered in  
order to play purchased DivX Video-on-Demand (VOD) movies. To obtain your registration  
code, locate the DivX VOD section in your device setup menu. Go to vod.divx.com for  
more information on how to complete your registration.  
®
®
-
-
DivX Certified to play DivX video up to HD 1080p, including premium content.  
®
®
DivX , DivX Certified and associated logos are trademarks of Rovi Corporation or its  
subsidiaries and are used under lisence.  
-
Covered by one or more of the following U.S. patents : 7,295,673; 7,460,668; 7,515,710;  
7,519,274.  
HDMI, the HDMI Logo, and High-Definition Multimedia Interface are  
trademarks or registered trademarks of HDMI Licensing LLC in the  
United States and other countries.  
Oracle and Java are registered trademarks of Oracle and/or its affiliates.  
Other names may be trademarks of their respective owners  
Open Source License Notice  
-
In the case of using open source software, Open Source Licenses are available on the  
product menu.  
Blu-ray Disc™, Blu-ray™ and the logos are trademarks of the Blu-ray Disc Association.  
Contact SAMSUNG WORLD WIDE  
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center.  
Area  
` Asia Pacific  
AUSTRALIA  
NEW ZEALAND  
CHINA  
Contact Centre  
Web Site  
Area  
` Middle East  
U.A.E  
Contact Centre   
Web Site  
1300 362 603  
800-SAMSUNG (726-7864)  
0800 SAMSUNG (0800 726 786)  
400-810-5858  
(852) 3698 4698  
OMAN  
800-SAMSUNG (726-7864)  
183-2255  
KUWAIT  
BAHRAIN  
Egypt  
8000-4726  
HONG KONG  
08000-726786  
800-22273  
1800 1100 11  
JORDAN  
IRAN  
3030 8282  
INDIA  
021-8255  
1800 3000 8282  
1800 266 8282  
Morocco  
Saudi Arabia  
` Africa  
NIGERIA  
080 100 2255  
9200-21230  
0800-112-8888  
021-5699-7777  
INDONESIA  
MALAYSIA  
1800-88-9999  
0800-726-7864  
1-800-10-SAMSUNG(726-7864) for PLDT  
1-800-3-SAMSUNG(726-7864) for Digitel  
1-800-8-SAMSUNG(726-7864) for Globe  
02-5805777  
0800-10077  
Ghana  
0302-200077  
PHILIPPINES  
Cote D’ Ivoire  
8000 0077  
Senegal  
800-00-0077  
SINGAPORE  
THAILAND  
1800-SAMSUNG(726-7864)  
Cameroon  
KENYA  
7095- 0077  
1800-29-3232  
02-689-3232  
0800 724 000  
0800 300 300  
0685 88 99 00  
0860-SAMSUNG(726-7864 )  
UGANDA  
0800-329-999  
0266-026-066  
TAIWAN  
VIETNAM  
TANZANIA  
SOUTH AFRICA  
1 800 588 889  
AK68-02164A-00  

Windmere HA 3206 User Manual
Weil McLain PCG (Series 7) User Manual
Vita Mix High Performance Commercial Blenders User Manual
Sony Cyber shot DSC HX20V User Manual
Sony CFD 656 User Manual
Sony Camcorder D90P User Manual
Sony BRAVIA DMX NV1 User Manual
Sears 153333531 User Manual
Samsung HMX U10 User Manual
Rola Bicycle Accessories 59403 User Manual