Samsung BD C5500C User Manual

BD-C5500

BD-C5500C

Blu-ray Disc Player

user manual

imagine the possibilities

Thank you for purchasing this Samsung product.

To receive more complete service,

please register your product at

www.samsung.com/register

Safety Information

Warning

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK).

NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

The lighting flash and Arrowhead within the CAUTION: TO REDUCE THE RISK OF ELECTRIC The explanation point within the triangle

triangle is a warning sign alerting you of

dangerous voltage inside the product.

SHOCK, DO NOT REMOVE COVER (OR BACK)

NO USER SERVICEABLE PARTS INSIDE. REFER instructions accompanying the product.

SERVICING TO QUALIFIED SERVICE PERSONNEL.

is a warning sign alerting you of important

WARNING

CLASS 1 LASER PRODUCT

•

To reduce the risk of fire or electric shock, do

not expose this appliance to rain or moisture.

This Compact Disc player is classified as a CLASS

1 LASER product. Use of controls, adjustments

or performance of procedures other than those

specified herein may result in hazardous radiation

exposure.

Complies with 21CFR 1040.10 except for

deviations pursuant to Laser Notice No. 50, dated

June 24, 2007.

FCC NOTE (for U.S.A)

This equipment has been tested and found to

comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC rules. These limits

are designed to provide reasonable protection

against harmful interference in a residential

installation. This equipment generates, uses

and can radiate radio frequency energy and, if

not installed and used in accordance with the

instructions, may cause harmful interference

to radio or television reception, which can be

determined by turning the equipment off and on.

The user is encouraged to try to correct the

interference by one or more of the following measures.

•

DANGER :

•

VISIBLE AND INVISIBLE LASER RADIATION

WHEN OPEN. AVOID DIRECT EXPOSURE TO

BEAM. (FDA 21 CFR)

CAUTION :

•

CLASS 3B VISIBLE AND INVISIBLE LASER

RADIATION WHEN OPEN. AVOID EXPOSURE

TO THE BEAM (IEC 60825-1)

Reorient or relocate the receiving antenna.

Increase the separation between the equipment

and receiver.

Connect this equipment into an outlet on a

circuit different from that to which the receiver is

connected.

Consult the dealer or an experienced radio/TV

technician for help.

•

THIS PRODUCT UTILIZES A LASER. USE

OF CONTROLS OR ADJUSTMENTS OR

PERFORMANCE OF PROCEDURES OTHER

THAN THOSE SPECIFIED HEREIN MAY

RESULT IN HAZARDOUS RADIATION

EXPOSURE. DO NOT OPEN COVER AND DO

NOT REPAIR YOURSELF. REFER SERVICING

TO QUALIFIED PERSONNEL.

•

This class B digital product meets all

requirements of the Canadian Interference -

Causing Equipment Regulations.

CLASS 1

KLASSE 1

LUOKAN 1

KLASS 1

LASER PRODUCT

LASER PRODUKT

LASER LAITE

Note to CATV system installer

LASER APPARAT

PRODUCTO LÁSER CLASE 1

This reminder is provided to call CATV system

installer’s attention to Article 820-40 of the

National Electrical Code (Section 54 of Canadian

Electrical Code, Part I) that provides guidelines

for proper grounding and, in particular, specifies

that the cable ground shall be connected to the

grounding system of the building as close to the

point of cable entry as practical.

NOTE

✎

If the Region number of a Blu-ray Disc/DVD disc

does not correspond to the Region number of this

player, the player cannot play the disc.

▪

English

ꢁ

Safety Information

Precautions

14. Refer all servicing to a

qualified service personnel.

Servicing is required

Important Safety Instructions

Read these operating instructions carefully before

using the unit. Follow all the safety instructions

listed below.

Keep these operating instructions handy for future

reference.

when the player has been

damaged in any way, such

as power-supply cord or

plug is damaged, liquid has been spilled or

objects have fallen into the player, the player

has been exposed to rain or moisture, does

not operate normally, or has been dropped.

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

Disc Storage & Management

4. Follow all instructions.

Disc Handling

5. Do not use this player near water.

6. Clean only with dry cloth.

Disc Shape

7. Do not block any ventilation openings, install

in accordance with the manufacturer’s

instructions.

•

Use discs with regular

shapes. If an irregular disc

(a disc with a special shape)

is used, this player may be damaged.

8. Do not install near any heat sources such

as radiators, heat registers, or other player

(including amplifiers) that produce heat.

Holding discs

•

Avoid touching the surface of a

disc where recording is performed.

9. The polarized or the grounding type plug has

an important safety purpose. A polarized plug

has two blades with one wider than the other.

A grounding type plug has two blades and a

third grounding prong. The wide blade or the

third prong is provided for your safety. If the

provided plug does not fit into your outlet,

consult an electrician for replacement of the

obsolete outlet.

Blu-ray Discs

•

If the player is not used for a long period of time,

remove the Blu-ray Disc from the player and

store it in its case.

Be careful not to leave fingerprints or scratches

on the surface of the Blu-ray Disc.

•

10. Protect the power cord from being deformed

or pinched particularly at plugs, convenience

receptacles, and the point where they exit

from the player.

DVD-VIDEO, Audio CD (CD-DA)

•

Wipe off dirt or contamination on the disc with a

soft cloth.

11. Only use attachments/accessories specified

by the manufacturer.

12. Use only with the cart, stand, tripod, bracket,

or table specified by the manufacturer, or

sold with the player. When a cart is used,

use caution when moving the cart/player

combination to avoid injury from tip-over.

13. Unplug this player during lightning storms or

when unused for long periods of time.

ꢂ

English

•

Be sure to remove the disc and turn off the

player after use.

Disconnect the AC power cord from the AC

outlet when you don’t intend to use the player

for long periods of time.

To clean a disc, wipe it in a straight

line from the inside to the outside of

the disc.

Do not expose the player to any

liquid.

When the AC plug is connected to a wall outlet,

the player will still draw power (standby mode)

when it is turned off.

Apparatus shall not be exposed to dripping or

splashing and no objects filled with liquids, such

as vases, shall be placed on the apparatus.

Disc Storage

Be careful not to damage the disc because the

data on these discs is highly vulnerable to the

environment.

•

Do not keep under direct sunlight.

Keep in a cool ventilated area.

Store vertically.

•

Keep in a clean protection jacket.

•

If you move your player suddenly from a cold

place to a warm place, condensation may

generate on the operating parts and lens and

cause abnormal disc playback. If this occurs,

wait for two hours before connecting the plug to

the power outlet.

•

Then insert the disc and try to play back again.

The main plug is used as a disconnect device

and shall stay readily operable at any time.

Handling Cautions

•

Do not write on the printed side with a ball-point

pen or pencil.

Maintenance of Cabinet

•

Do not use record cleaning sprays or antistatic.

Also, do not use volatile chemicals, such as

benzene or thinner.

Do not apply labels or stickers to discs. (Do not

use discs fixed with exposed tape adhesive or

leftover peeled-off stickers.)

For safety reasons, be sure to disconnect the AC

power cord from the AC outlet.

•

Do not use benzene, thinner, or other solvents

for cleaning.

•

Wipe the cabinet with a soft cloth.

•

Do not use scratch-proof protectors or covers.

Do not use discs printed with label printers

available on the market.

Do not load warped or cracked discs.

Before connecting other components to this

player, be sure to turn them all off.

Do not move the player while a disc is being

played as the disc may be scratched or broken,

or the player’s internal parts may be damaged.

Do not put a flower vase filled with water or any

small metal objects on the player.

Be careful not to put your hand into the disc

tray.

Do not place anything other than the disc in the

disc tray.

Exterior interferences such as lightning and

static electricity can affect the normal operation

of this player. If this occurs, turn the player

off and on again with the POWER button, or

disconnect and then reconnect the AC power

cord to the AC power outlet. The player will

operate normally.

Restrictions on Playback

•

This player may not respond to all operating

commands because some Blu-ray, DVD and

CD discs allow specific or limited operation and

features during playback.

•

Please note that this is not a defect in the

player.

•

Samsung cannot assure that this player will

play every disc bearing the Blu-ray Disc, DVD

or CD logo because disc formats evolve, and

problems and errors may occur during the

creation of Blu-ray Disc, DVD, CD software

and/or the manufacture of discs.

•

Please contact the SAMSUNG customer care

center if you have questions or encounter

difficulty in playing Blu-ray, DVD, or CD discs

in this player. Also, refer to rest of this user

manual for additional information on playback

restrictions.

English

ꢃ

Contents

Blu-ray Disc Features

Blu-ray Disc Player Features

KEy FEATURES

Warning

Precautions

Important Safety Instructions

Disc Storage & Management

Disc Handling

SAFETy INFORMATION

10 Before Using the user manual

GETTING STARTED

Disc Types and Contents that can be played.

Disc types that cannot be played

Blu-ray Disc Compatibility

Disc Types

Supported File Formats

Region Code

Logos of Discs that can be played

14 Accessories

15 Front Panel

16 Front Panel Display

17 Rear Panel

18 Remote Control

Tour of the Remote Control

Setting the Remote Control

Controllable TV Codes

20 Connecting to a TV

CONNECTIONS

Case 1 : Connecting to a TV with an HDMI Cable

- Best Quality (Recommended)

Case 2 : Connecting to a TV with DVI Cable

- Best Quality (Recommended)

Case 3 : Connecting to a TV (Component)

- Better Quality

Case 4 : Connecting to a TV (Video)

- Good Quality

ꢄ

English

24 Connecting to an Audio System

CONNECTIONS

Case 1 : Connecting to an Audio System

(HDMI Supported Amplifier) - Best Quality

(Recommended)

Case 2 : Connecting to an Audio System

(Dolby Digital, DTS Amplifier) - Better Quality

Case 3 : Connecting to an Audio System

(2 Channel Amplifier) - Good Quality

26 Connecting to the Network

Cable Network

Wireless Network

28 Before Starting (Initial Settings)

29 Setting the Menu

30 Display

SETUP

TV Aspect

BD Wise (Samsung Players only)

Resolution

HDMI Format

Movie Frame (24Fs)

Progressive Mode

Still Mode

HDMI Deep Color

32 Audio

Digital Output

PCM Downsampling

Dynamic Range Control

Downmixing Mode

DTS Neo:6

34 System

Initial Settings

Internet@TV Screen Size

Anynet+(HDMI-CEC)

BD Data Management

Clock

DivX(R) Registration

DivX(R) Deactivation

36 Network Setup

Network Settings

Network Status

BD-LIVE Internet Connection

English

ꢅ

Contents

40 Language

40 Security

SETUP

Parental Rating

Change Password

40 General

Background

Energy Saving

Front Display

Power On/Off Sound

41 Support

Software Upgrade

Contact Samsung

43 Playing a Disc

BASIC FUNCTIONS

Playback

Disc Structure

43 Using the Disc menu/Title menu/Popup menu

Using the Disc Menu

Using the Title Menu

Playing the Title List

Using the Popup Menu

44 Using the Search and Skip Functions

Searching for a Desired Scene

Skipping Chapters

44 Slow Motion Play/Step Motion Play

Slow Motion Play

Step Motion Play

45 Repeat Playback

Repeat the Title or Chapter

Repeat the Section

45 Using the TOOLS button

Moving to a Desired Scene Directly

Selecting the Audio Language

Selecting the Subtitle Language

Changing the Camera Angle

Selecting the Picture Setting

Setting BONUSVIEW

ꢆ

English

47 Listening to Music

BASIC FUNCTIONS

Buttons on the Remote Control used for Music

Playback

Playing an Audio CD (CD-DA)/MP3

Repeat an Audio CD (CD-DA)/MP3

Playlist

49 Playing back a Picture

Playing a JPEG Disc

Using the TOOLS button

50 Playing back a USB Storage Device

51 Using Internet@TV

NETWORK SERvICES

Getting Started with Internet@TV

Settings

Samsung AppS

55 BD-LIVE™

55 Software Upgrade Notification

55 Using the AllShare Function

57 Troubleshooting

60 Index

APPENDIx

61 Specifications

Compliance and Compatibility Notice

Copy Protection

Network Service Disclaimer

License

English

ꢇ

Getting Started

Before Using the user manual

Disc Types and Contents that can be played.

Term

Logo

Icon

Definition

BD-ROM

This involves a function available on a BD-ROM.

�

BD-RE/-R

This involves a function available on a BD-RE/-R disc recorded in the BD-RE format.

This involves a function available on a DVD-VIDEO.

DVD-VIDEO

DVD-RW(V)

DVD-R

This involves a function available on recorded DVD+RW or DVD-RW(V)/DVD-R/+R

discs that have been recorded and finalized.

DVD+RW

�

DVD+R

Audio CD

This involves a function available on an audio CD-RW/-R (CD-DA format).

�

MP3

WMA

This involves a function available in a CD-RW/-R, DVD-RW/-R disc or a USB storage

media containing MP3 or WMA contents.

This involves a function available in a CD-RW/-R, DVD-RW/-R disc or a USB storage

media containing JPEG contents.

JPEG

DivX

MKV

MP4

This involves a function available in a CD-RW/-R, DVD-RW/-R disc or a USB storage

media containing DivX, MKV, MP4 contents.

�

NOTE

✎

The player may not play certain CD-RW/-R and DVD-R due to the disc type or recording conditions.

If a DVD-RW/-R disc has not been recorded properly in DVD video format, it will not be playable.

▪

Disc types that cannot be played

•

HD DVD

DVD-ROM/PD/MV-

Disc, etc

•

DVD-RAM

Super Audio CD

(except CD layer)

•

DVD-RW(VR mode)

•

3.9 GB DVD-R Disc for

Authoring.

CVD/CD-ROM/CDV/

CD-G/CD-I/LD

(CD-Gs play audio only,

not graphics.)

English

NOTE

✎

Disc Types

Some commercial discs and DVD discs purchased

▪

outside your region may not be playable with this

player. When these discs are played, either “This

disc can not be played.” or “Please check the

regional code of the disc.” will be displayed.

BD-ROM

This Blu-ray disc can only be played back.

This player can play back pre-recorded

commercial BD-ROM discs.

Playback may not work for some types of discs, or

when specific operations, such as angle change and

aspect ratio adjustment, are being performed.

Information about the discs is written in detail on the

disc box. Please refer to this if necessary.

▪

BD-RE/-R

This Blu-ray disc can be recorded and played

back.

This player can play back a BD-RE/-R disc

recorded by other compatible Blu-ray disc

recorders.

Do not allow the disc to become dirty or scratched.

Fingerprints, dirt, dust, scratches or deposits of

cigarette smoke on the recording surface may make

it impossible to use the disc for playback.

▪

Discs with PAL programs recorded on them cannot

be played using this player.

DVD-VIDEO

▪

•

This player can play back pre-recorded

commercial DVD discs (DVD-VIDEO discs) with

movies.

This player is compatible with the NTSC color system

only.

When a BD-J title is played, loading may take longer

than a normal title, or some functions may perform

slowly.

•

When switching from the first layer to the

second layer of a dual-layered DVD-VIDEO disc,

there may be momentary distortion in the image

and sound. This is not a malfunction of the

player.

This player may not respond to all operating

commands because some Blu-ray, DVD and CD

discs allow specific or limited operation and features

during playback.

▪

DVD-RW

Please note that this is not a defect in the player.

This player can play back a DVD-RW disc

recorded and finalized with a DVD video recorder.

Ability to play back may depend on recording

conditions.

Samsung cannot assure that this player will play

every disc bearing the Blu-ray Disc, DVD or CD logo

because disc formats evolve, and problems and

errors may occur during the creation of Blu-ray Disc,

DVD, CD software and/or the manufacture of discs.

Please contact the SAMSUNG customer care center

if you have questions or encounter difficulty when

playing Blu-ray, DVD, or CD discs in this player.

Also, refer to rest of this user manual for additional

information on playback restrictions.

▪

DVD-R

This player can play back a DVD-R disc recorded

and finalized with a DVD Video recorder. Ability to

play back may depend on recording conditions.

DVD+RW

•

This player can play back a DVD+RW disc

recorded with a DVD Video recorder. Ability to

play back may depend on recording conditions.

Blu-ray Disc Compatibility

Blu-ray Disc is a new and evolving format.

Accordingly, disc compatibility issues are possible.

Not all discs are compatible and not every disc will

play back. For additional information, refer to the

Compliance and Compatibility Notice section of

this user manual.

English

Getting Started

DVD+R

CD-RW/-R

•

This player can play back a DVD+R disc

recorded and finalized with a DVD Video

recorder. Ability to play back may depend on

recording conditions.

•

Use a 700MB(80 minutes) CD-RW/-R disc.

If possible, do not use a 800MB(90 minutes) or

above disc, as the disc may not play back.

If the CD-RW/-R disc was not recorded as a

closed session, you may experience delays

when playing back the beginning of the disc or

all recorded files may not play.

Some CD-RW/-R discs may not be playable

with this player, depending on the device which

was used to burn them. For contents recorded

on CD-RW/-R media from CDs for your

personal use, playability may vary depending on

contents and discs.

•

Audio CD (CD-DA)

•

This player can play back CD-DA format audio

CD-RW/-R discs.

The player may not be able to play some

CD-RW/-R discs due to the condition of the

recording.

•

Supported File Formats

Video File Support

File Extension

Container

Video Codec

Audio Codec

Resolution

1920x1080

Divx 3.11/4.x/5.1/6.0

XviD

MP3

AC3

DTS

WMA

PCM

*.avi

AVI

MP4v3

H.264 BP/MP/HP

VC-1 AP(wmv1)

DivX 5.1/6.0

XviD

MP3

AC3

DTS

*.mkv

MKV

H.264 BP/MP/HP

VC-1 AP

*.wmv

*.mp4

WMA

AAC

WMV

MP4

VC-1 SM

MP4 (mp4v)

H.264 BP/MP/HP

MPEG1

MP1, 2

AC3

DTS

*.mpg

*.mpeg

MPEG2

H.264 BP/MP/HP

1ꢀ

English

Music File Support

Region Code

Both the player and the discs are coded by region.

These regional codes must match in order to play

the disc. If the codes do not match, the disc will

not play.

File

Audio

Codec

Container

Extension

Support Range

*.mp3

MP3

The Region Number for this player is described on

the rear panel of the player.

Compliant with

WMA version 10

* Sampling rates (in

kHz) - 8, 11, 16,

22, 32, 44.1, 48

* Bit rates - All bit-

rates in the range

5kbps to 384kbps

Region

Disc Type

Area

Code

*.wma

WMA

North America, Central America,

South America, Korea, Japan,

Taiwan, Hong Kong and South

East Asia.

AVCHD (Advanced Video Codec High

Definition)

Europe, Greenland, French

territories, Middle East, Africa,

Australia and New Zealand.

Blu-ray

•

This player can playback AVCHD format discs.

These discs are normally recorded and used in

camcorders.

India, China, Russia, Central

and South Asia.

•

The AVCHD format is a high definition digital

video camera format.

The MPEG-4 AVC/H.264 format is capable of

compressing images at higher efficiency than

that of the conventional image compressing

format.

The U.S., U.S. territories and

Canada

Europe, Japan, the Middle East,

Egypt, South Africa, Greenland

•

Some AVCHD discs use the “x.v.Color” format.

This player can playback AVCHD discs using

“x.v.Color” format.

Taiwan, Korea, the Philippines,

Indonesia, Hong Kong

•

“x.v.Color” is a trademark of Sony Corporation.

Mexico, South America,

Central America, Australia,

New Zealand, Pacific Islands,

Caribbean

DVD-VIDEO

“AVCHD” and the AVCHD logo are trademarks

of Matsushita Electronic Industrial Co., Ltd. and

Sony Corporation.

NOTE

✎

Russia, Eastern Europe, India,

most of Africa, North Korea,

Mongolia

Some AVCHD format discs may not play, depending

▪

on the recording condition.

AVCHD format discs need to be finalized.

“x.v.Color” offers a wider color range than normal

DVD camcorder discs.

▪

China

Some DivX, MKV and MP4 format discs may not

play, depending on the video resolution and frame

rate condition.

manual may be reproduced or copied without the

prior written permission of Samsung Electronics

Co.,Ltd.

English

1ꢁ

Getting Started

Logos of Discs that can be played

Blu-ray Disc

DTS-HD Master Audio

DivX

BD-LIVE

NTSC broadcast system in U.S.A, Canada,

Korea, Japan

Dolby TrueHD

Java

Accessories

Check for the supplied accessories below.

Audio/Video cable

(AC39-00073A)

HDMI cable (BD-C5500C only)

Batteries for Remote Control (AAA Size)

(AC43-12002H)

(MF39-00299A)

POWER

BONUSVIEW

SOURCE

SUBTITLE

AUDIO

DISC MENU

TOOLS

TITLE MENU

POPUP

INFO

RETURN

EXIT

INTERNET@ FULL SCREEN REPEAT

MUTE

VOL

AK59-00104R

User Manual

(AK68-01854A)

Quick Guide

(AK68-01855A)

Remote Control

(AK59-00104R)

1ꢂ

English

Front Panel

b c

def g

DISC TRAY

Opens to accept a disc.

REMOTE CONTROL SENSOR Detects signals from the remote control.

DISPLAY

Displays the playing status, time, etc.

Opens and closes the disc tray.

Stops disc playback.

OPEN/CLOSE BUTTON

STOP BUTTON

PLAY/PAUSE BUTTON

POWER BUTTON

Plays a disc or pauses playback.

Turns the player on and off.

A USB memory flash stick can be connected here and used as storage when

connected to BD-LIVE. It can also be used for software upgrades and MP3/JPEG/

DivX/MKV/MP4 playback.

USB HOST

NOTE

✎

Software upgrades using the USB Host jack must be performed with a USB memory flash stick only.

A USB device consuming more than 500mA requires a separate power supply device for normal operation.

A USB HDD device cannot be used for BD Data storage (BD-LIVE).

▪

English

1ꢃ

Getting Started

Front Panel Display

IN DISC INDICATOR

Lights when a disc is inserted or played back.

Displays the play time and the current status.

Lights when the wireless network is connected.

CURRENT TIME AND

STATUS INDICATOR

WIFI INDICATOR

1ꢄ

English

Rear Panel

ab c

g f e

Connect the optional Wireless LAN Adapter (WIS09ABGN) here to use the Wireless

network.

WIRELESS LAN ADAPTER

Can be used for network based services (See pages 51~56), BD-LIVE and software

upgrades using a network connection.

LAN

Using an HDMI cable, connect this HDMI output terminal to the HDMI input terminal

on your TV for the best quality picture or to your Receiver for the best quality sound.

HDMI OUT

COMPONENT OUT

VIDEO OUT

Connects to equipment having component video input.

Connects the input of external equipment using a video cable.

Connects to the audio input of external equipment using audio cables.

Connects to a Receiver.

AUDIO OUT

DIGITAL AUDIO OUT

English

1ꢅ

Getting Started

Remote Control

Tour of the Remote Control

POWER

Turn the player on and off.

Turn the TV on and off.

(To operate your TV, please refer to page 19)

To open and close the disc tray.

BONUSVIEW

SOURCE

After setup, allows you to set the input

source on your TV.

Press this to use Bonusview function.

Press numeric buttons to operate options.

SUBTITLE

AUDIO

Use this to access various audio functions

on a disc (Blu-ray Disc/DVD).

Press this to switch the Blu-ray Disc/DVD’s

subtitle language.

Press to skip backwards or forwards.

Press to search a disc backwards or

forwards.

Press to stop a disc.

Press to pause a disc.

Press to play a disc.

Use this to enter the disc menu.

DISC MENU

TOOLS

TITLE MENU

POPUP

Use this to enter the popup menu/title

menu.

Use this to display the playback information

during playing a Blu-ray/DVD disc.

Press this to move to the home menu.

Press this to use Tools menu.

INFO

Select menu items and change menu value.

Press this to exit the menu.

RETURN

EXIT

Return to the previous menu.

These buttons are used both for menus

on the player and also several Blu-ray Disc

functions.

Press this to link to various Internet@TV

services.

Press this to see the full screen on a TV.

INTERNET@ FULL SCREEN REPEAT

Allows you to repeat a title, chapter, track

or disc.

MUTE

VOL

TV volume adjustment.

AK59-00104R

Use this to select a TV program.

Mutes the speakers of your TV.

Installing batteries

NOTE

✎

If the remote does not operate properly :

▪

•

Check the polarity +/– of the batteries (Dry-Cell)

Check if the batteries are drained.

Check if remote sensor is blocked by obstacles.

Check if there is any fluorescent lighting nearby.

1ꢆ

English

Setting the Remote Control

Controllable TV Codes

You can control certain functions of your TV with

this remote control.

Brand

SAMSUNG

AIWA

Code

Brand

NOBLEX

NOKIA

Code

TV POWER+66

TV POWER+74

TV POWER+01, +02,

+03, +04, +05,

+06, +07, +08, +09

Button

Function

TV POWER+72, +73,

+75

TV POWER

Used to switch the television on and off.

NORDMENDE

PANASONIC

PHILIPS

TV POWER+82

Used to select an external source

connected to the TV.

TV POWER+53, +54,

+74, +75

TV SOURCE

TV POWER+10, +11,

+12, +13, +14,

+15, +16, +17, +18

ANAM

TV POWER+06, +55,

+56, +57

TV VOL (+/–) Used to adjust the volume of the television.

BANG & OLUFSEN TV POWER+57

TV CH (

)

Used to select the desired channel.

Used to toggle the sound on and off.

, .

TV POWER+06, +56,

+57

PHONOLA

PIONEER

BLAUPUNKT

BRANDT

BRIONVEGA

CGE

TV POWER+71

TV POWER+73

TV POWER+57

TV POWER+52

TV MUTE

TV POWER+58, +59,

+73, +74

NOTE

✎

RADIOLA

TV POWER+06, +56

The functions listed above will not necessarily work

on all televisions. If you encounter problems, operate

the television directly.

▪

CONTINENTAL

EDISON

RADIOMARELLI TV POWER+57

TV POWER+75

RCA

REX

TV POWER+45, +46

TV POWER+19, +20,

+23, +24, +25,

+26, +27, +28,

+29, +30, +31,

+32, +33, +34

TV POWER+74

DAEWOO

To determine whether your television is

compatible, follow the instructions below.

TV POWER+57, +72,

+73, +74, +75

SABA

SALORA

SANYO

EMERSON

FERGUSON

TV POWER+64

TV POWER+73

TV POWER+74

1. Switch your television on.

TV POWER+41, +42,

+43, +44, +48

2. Point the remote control towards the

TV POWER+06, +49,

+57

FINLUX

television.

FORMENTI

FUJITSU

TV POWER+57

TV POWER+84

TV POWER+70

SCHNEIDER

SELECO

TV POWER+06

TV POWER+74

3. Press and hold the TV POWER button and

enter the two-figure code corresponding to

the brand of your television by pressing the

appropriate number buttons.

GRADIENTE

TV POWER+36, +37,

+38, +39, +48

SHARP

TV POWER+49, +52,

+71

GRUNDIG

HITACHI

If your television is compatible with the remote

control, it will switch off.

It is now programmed to operate with the

remote control.

SIEMENS

SINGER

TV POWER+71

TV POWER+57

TV POWER+35, +48

TV POWER+73

TV POWER+60, +72,

+73, +75

SINUDYNE

SONY

IMPERIAL

JVC

TV POWER+52

TV POWER+61, +79

NOTE

✎

TELEAVA

TV POWER+06, +19,

+20, +21, +22, +78

If several codes are listed for your television brand,

try each one in turn until you find one that works.

TV POWER+67, +73,

+75, +76

▪

TELEFUNKEN

THOMSON

LOEWE

TV POWER+06, +69

TV POWER+72, +73,

+75

LOEWE OPTA TV POWER+06, +57

If you replace the remote control’s batteries, you

must set the brand code again.

▪

MAGNAVOX

METZ

TV POWER+40

TV POWER+57

THOMSON ASIA TV POWER+80, +81

TV POWER+47, +48,

TOSHIBA

TV POWER+06, +48,

+62, +65

MITSUBISHI

+49, +50, +51, +52

MIVAR

NEC

TV POWER+52, +77

TV POWER+83

WEGA

YOKO

TV POWER+57

TV POWER+06

TV POWER+63

NEWSAN

TV POWER+68

ZENITH

English

1ꢇ

Connections

Connecting to a Tv

Case 1 : Connecting to a TV with an HDMI Cable - Best Quality

(Recommended)

1. Using an HDMI cable, connect the HDMI OUT terminal on the rear of the player to the HDMI IN

terminal of your TV.

2. Turn on the player and TV.

3. Press the input selector on your TV remote control until the HDMI signal from the player appears on

your TV screen.

•

If you have set the remote control to operate your TV (See page 19), press the TV SOURCE

button on the remote control and select HDMI as the external source of the TV.

HDMI cable

(not included)

NOTE

✎

An HDMI cable outputs digital video/audio, so you don’t need to connect an audio cable.

▪

If the player is connected to your TV in HDMI 720p, 1080i, 1080p output mode, you must use a High speed(category2)

HDMI cable.

HDMI outputs only a pure digital signal to the TV.

If your TV does not support HDCP (High-bandwidth Digital Content Protection), random noise appears on the screen.

▪

Depending on your TV, certain HDMI output resolutions may not work. Please refer to the user manual of your TV.

▪

When you connect the player to the TV using the HDMI cable for the first time or to a new TV, the HDMI output

resolution will be automatically set to the highest supported by the TV.

ꢀ0

English

Case 2 : Connecting to a TV with DVI Cable - Best Quality

(Recommended)

1. Using an HDMI-DVI cable, connect the HDMI OUT terminal on the rear of the player to the DVI IN

terminal of your TV.

2. Using the audio cables, connect the AUDIO OUT (red and white) terminals on the rear of the player

to the AUDIO IN (red and white) terminals of your TV.

3. Turn on the player and TV.

4. Press the input selector on your TV remote control until the DVI signal from the player appears on

your TV screen.

•

If you have set the remote control to operate your TV (See page 19), press the TV SOURCE

button on the remote control and select HDMI as the external source of the TV.

HDMI-DVI cable

(not included)

Audio cable

Red

White

NOTE

✎

HDMI outputs only a pure digital signal to the TV. If your TV does not support HDCP (High-bandwidth Digital Content

Protection), random noise appears on the screen.

▪

Depending on your TV, certain HDMI output resolutions may not work. Please refer to the user manual of your TV.

▪

When you connect the player to the TV using the HDMI-DVI cable for the first time or to a new TV, the HDMI output

resolution will be automatically set to the highest supported by the TV.

English

ꢀ1

Connections

Case 3 : Connecting to a TV (Component) - Better Quality

Connecting to your TV using Component video cables.

You will enjoy high quality images with accurate color reproduction. Component video separates the

picture element into black and white(Y), blue(P^B) and red(P^R) signals to present clear and clean images.

(Audio signals are delivered through the audio output.)

1. Using Component video cables, connect the COMPONENT VIDEO OUT terminals on the rear of

the player to the COMPONENT IN terminals of your TV.

2. Using the audio cables, connect the AUDIO OUT (red and white) terminals on the rear of the player

to the AUDIO IN (red and white) terminals of your TV.

3. Turn on the player and TV.

4. Press the input selector on your TV remote control until the “COMPONENT” signal from the player

appears on the TV screen.

•

If you have set the remote control to operate your TV (See page 19), press the TV SOURCE

button on the remote control and select COMPONENT as the external source of the TV.

Component cable

(not included)

Audio cable

Red

White Red

Blue Green

NOTE

✎

Depending on the manufacturer, the component terminals on your TV may be marked “R-Y, B-Y, Y ” or “Cr, Cb, Y”

instead of “P^B, P^R, Y”. The number and position of terminals may vary depending on the TV set.

Please refer to the user manual of your TV.

▪

You can select from a variety of resolution settings for Blu-ray Discs such as 1080i, 720p, 480p, 480i, depending on

the disc type. (See pages 30~31)

The actual resolution may differ from the setting in the setup menu if both Component and HDMI cables are connected.

The resolution may also be different depending on the disc. (See pages 30~31)

In DVD playback, if both HDMI and Component jacks are connected and you select the Component 1080p, 1080i or

720p mode, the Display Setup menu will show the output resolution as 1080p, 1080i or 720p in the menu.

The resolution is actually 480i.

▪

ꢀꢀ

English

Case 4 : Connecting to a TV (Video) - Good Quality

1. Using video/audio cables, connect the VIDEO OUT (yellow) / AUDIO OUT (red and white)

terminals on the rear of the player to the VIDEO IN (yellow) / AUDIO IN (red and white) terminals of

your TV.

2. Turn on the player and TV.

3. Press the input selector on your TV remote control until the “VIDEO” signal from the player appears

on the TV screen.

•

If you have set the remote control to operate your TV (See page 19), press the TV SOURCE

button on the remote control and select VIDEO as the external source of the TV.

Audio/Video cable

Red

White Yellow

NOTE

✎

Noise may be generated if the audio cable is placed too close to the power cable.

▪

If you want to connect to an Amplifier, please refer to the Amplifier connection pages. (See pages 24~25)

The number and position of terminals may vary depending on your TV set. Please refer to the user manual of your TV.

If there is only one audio input terminal on the TV, connect it to the AUDIO OUT(right/white) terminal of the player.

CAUTION

Do not connect the unit through a VCR. Video signals fed through VCRs may be affected by copyright protection

systems and the picture will be distorted on the television.

▪

English

ꢀꢁ

Connections

Connecting to an Audio System

•

Please turn the volume down when you turn on the Amplifier. Sudden loud sound may cause

damage to the speakers and your ears.

•

Please set the audio in the menu screen according to the Amplifier. (See pages 32~34)

The position of HDMI terminals may vary depending on the Amplifier. Please refer to the user manual

of your Amplifier.

Case 1 : Connecting to an Audio System (HDMI Supported Amplifier)

- Best Quality (Recommended)

1. Using an HDMI cable, connect the HDMI OUT terminal on the rear of the player to the HDMI IN

terminal of your Amplifier.

2. Using an HDMI cable, connect the HDMI OUT terminal of the Amplifier to the HDMI IN terminal of

your TV.

3. Turn on the player, TV and Amplifier.

4. Press the input select button of the Amplifier to select the external input in order to hear sound from

the player. Refer to your Amplifier’s user manual to set the Amplifier’s audio input.

HDMI cable

(not included)

HDMI cable

(not included)

ꢀꢂ

English

Case 2 : Connecting to an Audio

System (Dolby Digital, DTS

Amplifier) - Better Quality

Case 3 : Connecting to an Audio

System (2 Channel Amplifier)

- Good Quality

1. Using an optical cable, connect the DIGITAL

AUDIO OUT (OPTICAL) terminal on the

rear of the player to the DIGITAL AUDIO IN

(OPTICAL) terminal of your Amplifier.

1. Using the audio cables, connect the AUDIO

OUT (red and white) terminals on the rear of

the player to the AUDIO IN (red and white)

terminals of your Amplifier.

2. Using the video signal cable(s), connect

the HDMI, COMPONENT or VIDEO OUT

terminals on the rear of the player to the

HDMI, COMPONENT or VIDEO IN terminal

of your TV. (See pages 20~23)

2. Using the video signal cable(s), connect

the HDMI, COMPONENT or VIDEO OUT

terminals on the rear of the player to the

HDMI, COMPONENT or VIDEO IN terminal

of your TV. (See pages 20~23)

3. Turn on the player, TV and Amplifier.

4. Press the input select button of the Amplifier

to select the external input in order to

hear sound from the player. Refer to your

Amplifier’s user manual to set the Amplifier’s

audio input.

4. Press the input select button of the Amplifier

to select the external input in order to

hear sound from the player. Refer to your

Amplifier’s user manual to set the Amplifier’s

audio input.

Case 2 : Optical cable

(not included)

Case 3 : Audio cable

Red

White

NOTE

✎

When following the case 2 connection, discs with PCM audio soundtracks will only be heard over the front two

channels.

▪

English

ꢀꢃ

Connections

Connecting to the Network

This player enables you to view network based services (See pages 51~56) such as Internet@TV and

BD-LIVE, as well as receive software upgrades when a network connection is made. We recommend

using an AP (Access Point) or IP router for the connection. For more information on router connection,

refer to the user manual of the router or contact the router manufacturer for technical assistance.

Cable Network

1. Using the Direct LAN Cable (UTP cable), connect the LAN terminal of the player to the LAN terminal

of your modem.

2. Set the network options. (See pages 36~39)

Router

Broadband modem

(with integrated router)

Broadband modem

Broadband

service

Broadband

service

Networking with PC for

AllShare function

(See pages 55~56)

NOTE

✎

Internet access to Samsung’s software update server may not be allowed, depending on the router you use or the ISP’s

policy. For more information, contact your ISP (Internet Service Provider).

▪

For DSL users, please use a router to make a network connection.

▪

For the AllShare function, a PC must be connected in the network as shown in the figure.

ꢀꢄ

English

Wireless Network

You can connect to network with a Wireless IP sharer.

1. A wireless AP/IP router is required to make a wireless network connection. Connect the wireless

LAN adapter to the Wireless LAN Adapter on the rear panel of the player.

2. Set the network options. (See pages 36~39)

Broadband

service

Wireless LAN Adapter

(not included)

Wireless IP sharer

Networking with PC for

AllShare function

(See pages 55~56)

NOTE

✎

Use only the optional Samsung wireless LAN adapter with this player. (Model name: WIS09ABGN

▪

Do not use this adapter with any other third-party products.

Please contact the retailer of this player for purchasing the wireless LAN adapter.

You must use a wireless IP sharer that supports IEEE 802.11 a/b/g/n. (n is recommended for stable operation of the

wireless network.)

▪

Wireless LAN, by its nature, may cause interference, depending on the use condition (AP performance, distance,

obstacles, interference by other radio devices, etc).

Set the wireless IP sharer to Infrastructure mode. Ad-hoc mode is not supported.

When applying the security key for the AP (wireless IP sharer), only the following is supported.

1) Authentication Mode : WEP, WPAPSK, WPA2PSK

▪

2) Encryption Type : WEP, TKIP, AES

For the AllShare function, a PC must be connected in the network as shown in the figure.

▪

English

ꢀꢅ

Setup

5. Press the ◄► buttons to the select the

desired Network Settings: Wired, Wireless or

PBC (WPS), then press the ENTER button.

(See pages 36~39)

Before Starting (Initial Settings)

1. Turn on your TV after connecting the player.

(When the player is connected to TV for the

first time, player will turn on automatically and

the Initial Settings screen will be displayed.)

The Network Test will start and Initial Settings

will be completed.

6. Press the OK button.

Initial Settings I On-Screen Language

Select a language for the on-screen displays.

The home menu will be displayed. (For more

information about home menu, please see

page 29)

English

Français

Deutsch

Español

Italiano

•

Home Menu

Nederlands

You Tube

^raT^dioV service

Please activate Intern

int

^ert^ne

to enjoy a variety of Internet Services.

> Move " Select

2. Press the ▲▼ buttons to select desired

language, then press the ENTER button.

3. Press the ENTER button to select Start

No Disc

a Change Device

d View Devices " Enter

button.

Initial Settings

NOTE

✎

TV Aspect and Network will be set.

Each setting may be changed later under "Settings"

When the player is connected to TV for the first time,

player will turn on automatically.

▪

Do not confuse because this is not malfunction.

The home menu will not be displayed if you do not

configure the initial settings.

▪

Start

If you press the BLUE(D) button during the network

setup, you can access the home menu even if the

network setup is not completed yet.

Previous " Select

When you return to home menu, the full screen

mode will be cancelled automatically.

▪

4. Press the ▲▼ buttons to select the desired

TV Aspect ratio, then press the ENTER

button. (See page 30)

If you want to display Initial Setting screen again

in order to make changes, press the STOP (

)

button on the front panel of the player for more than

5 seconds with no disc inserted.

Initial Settings I Network

Network Setting is needed to use various Internet services.

Choose the primary method for connecting to network.

Use the HDMI cable to connect the player to an

Anynet+(HDMI-CEC)-compliant Samsung TV.

If the TV uses a language supported by the player,

that language will be set to a preferred language

automatically.

However, the Anynet+(HDMI-CEC) feature should

be set to On in both TV and the player.

▪

Wired : Set the network by using Ethernet cable.

Please make sure that Ethernet cable is connected.

Wireless

PBC (WPS)

Wired

Skip < Move " Select

ꢀꢆ

English

If the player is left in the stop mode more than 5

minutes without being used, a screen saver will

appear on your TV. If the player is left in the screen

saver mode for more than 25 minutes, the power

will automatically turn off.

▪

Selects the Settings.

Displays buttons available.

2. Press the ◄► buttons to select Settings,

then press the ENTER button.

3. Press the ▲▼ buttons to select the desired

Setting the Menu

submenu, then press the ENTER button.

4. Press the ▲▼ buttons to select the desired

DISC MENU

TITLE MENU

POPUP

item, then press the ENTER button.

TOOLS

INFO

5. Press the EXIT button to exit the menu.

NOTE

✎

When the player is connected to the network, select

▪

RETURN

EXIT

Internet@TV from the home menu.

Download desired content from Samsung AppS.

(See page 54)

MENU Button : Press this to move to the home menu.

The access step may differ depending on the

selected menu.

▪

RETURN Button : Return to the previous menu.

The OSD (On Screen Display) may change in this

player after upgrading the software version.

ENTER / DIRECTION Button :

Move the cursor or select an item.

Select the currently selected item.

Confirm the setting.

EXIT Button : Press this to exit the menu.

1. Press the POWER button.

The Home Menu will appear.

•

Home Menu

You Tube

^raT^dioV service

Please activate Intern

int

^ert^ne

to enjoy a variety of Internet Services.

No Disc

a Change Device

d View Devices " Enter

Selects the Internet@TV.

Selects the Videos.

Selects the Music.

Selects the Photos.

English

ꢀꢇ

Setup

If you select the 16:9 Normal, 4:3 Pillarbox may

displayed.

Display

▪

You can configure various display options such as

the TV Aspect, Resolution, etc.

In this case, you can’t see full screen by pressing

the FULL SCREEN button on the remote control.

TV Aspect

BD Wise (Samsung Players only)

Depending on the type of television you have, you

may want to adjust the screen setting.

BD Wise is Samsung’s latest inter-connectivity

feature.

When you connect Samsung players with BD

Wise to each other via HDMI, the optimum

resolution will be set automatically.

•

16:9 Normal

16:9 Wide

Certain movies(4:3 source) will be

displayed in 4:3 Pillarbox (black

bars on sides of picture) if 16:9

normal is selected.

•

On : The original resolution of the BD/DVD disc

will be output to the TV.

•

Off : The output resolution will be fixed

according to the Resolution previously set,

regardless of the resolution of the disc.

NOTE

✎

You can view the full 16:9 picture

on your widescreen TV.

If you want to change the resolution in BD Wise, you

must set BD Wise to Off in advance.

▪

If you set off the BD Wise, the resolution of the

connected TV will be adjusted to its maximum

resolution automatically.

▪

4:3 Letter Box

If the player is connected to a device that does not

support BD Wise, you can not use the BD Wise

function.

▪

Select when you want to see the

total 16:9 ratio screen a Blu-ray

Disc/DVD supplies, even though

you have a TV with a 4:3 ratio

screen. Black bars will appear at

the top and bottom of the screen.

For proper operation of BD Wise, set the BD Wise

menu of both the product and the TV to On.

Resolution

Sets the output resolution of the Component and

HDMI video signal.

The number in 1080p, 1080i, 720p, 480p, 480i

indicates the number of lines of video.

The i and p indicate interlace and progressive

scan, respectively.

•

4:3 Pan-Scan

Select when you want to see the

16:9 video supplied by the Blu-ray

Disc/DVD without the black bars

on top and bottom, even though

you have a TV with a 4:3 ratio

screen(extreme left and right portion

of the movie picture will be cut off).

•

Auto : It automatically checks and sets the

optimal resolution.

•

BD Wise : Automatically sets the optimal

resolution when connected via HDMI to a TV

with the BD Wise feature. (The BD Wise menu

item appears only if BD Wise is set to On.)

1080p : Outputs 1080 lines of progressive

video.

NOTE

✎

Depending on the disc type, some aspect ratios may

not be available.

▪

If you select an aspect ratio and option which is

different than the aspect ratio of your TV screen,

then the picture might appear to be distorted.

•

1080i : Outputs 1080 lines of interlaced video.

720p : Outputs 720 lines of progressive video.

480p : Outputs 480 lines of progressive video.

480i : Outputs 480 lines of interlaced video.

If you select the 4:3 Pan-Scan or 4:3 Letter Box, you

can’t see full screen by pressing the FULL SCREEN

button on the remote control.

▪

ꢁ0

English

Resolution according to the output mode

•

Blu-ray Disc playback

HDMI / connected

HDMI / not connected

Output

Setup

HDMI Mode

Component/VIDEO Mode

Component Mode

VIDEO Mode

Auto

Optimal Resolution

1080p@60F

480i

1080p, Movie Frame(24Fs) off

1080p/1080i,

Movie Frame(24Fs) on

1080p@24F

480i

1080i, Movie Frame(24Fs) off

1080i

720p

480p

480i

1080i

720p

480p

480i

720p

480p

480i

•

DVD playback

HDMI / connected

HDMI / not connected

Output

Setup

HDMI Mode

Optimal Resolution

1080p@60F

1080i

Component/VIDEO Mode

Component Mode

VIDEO Mode

Auto

1080p

1080i

720p

480p

480i

480p

480i

720p

480p

NOTE

If the screen is blank, press and hold the STOP (

)

✎

▪

button on the front of the player for more than 5

If the connected TV does not support Movie Frame or

the selected resolution, the message “If no pictures

are shown after the selection, please wait for 15

seconds. And then, the resolution will be reverted to

the previous value automatically. Would you like to

make a selection?” will be displayed.

▪

seconds (no disc inserted). All settings are restored to

the factory default. Follow the steps on the previous

page to access each mode and select the Display

Setup that your TV will support.

When the factory default settings are restored, all

the user data stored in the BD data will be deleted.

▪

If you select Yes and the resolution is not supported,

the TV’s screen will be blank. Please wait for 15

seconds and the resolution will be reverted to the

previous value automatically.

The Blu-ray Disc must have the 24 frame feature in

order to use the Movie Frame (24Fs) mode.

If both HDMI and Component jacks are connected

and you are currently viewing component output,

there is a difference between resolution table and

acutal resuloution depending on your TV.

English

ꢁ1

Setup

HDMI Format

HDMI Deep Color

You can optimize the color setting from the HDMI

output.

Set to output the picture from the HDMI OUT jack

with Deep Color or not. Deep Color allows more

accurate color reproduction with deeper color

depth.

Select a connected device Type.

•

TV : Select if connected to a TV via HDMI.

Monitor : Select if connected to a Monitor via

HDMI.

•

Auto : The picture will be output with Deep

Color to the connected TV which supports

HDMI Deep Color.

•

Off : The picture will be output without Deep

Color.

Movie Frame (24Fs)

Setting the Movie Frame (24Fs) feature to On

allows you to adjust the player’s HDMI output to

24 frames per second for improved picture quality.

You can enjoy the Movie Frame (24Fs) feature only

on a TV supporting this frame rate. This menu can

only be selected in 1080i or 1080p HDMI output

resolution modes.

Audio

Digital Output

Set Digital Output depending on the connected

receiver. (For more details, please refer to the

digital output selection on the next page)

•

On : Movie Frame (24Fs) functions will work.

Off : Movie Frame (24Fs) functions will not work.

•

PCM

NOTE

✎

Bitstream(Re-encode)

Bitstream(Audiophile)

If your TV does not support Movie Frame (24Fs)

function, the pop-up message will be displayed.

▪

NOTE

✎

Be sure to select the correct Digital Output or you

▪

Progressive Mode

Set to improve picture quality when viewing DVDs.

will hear no sound or a loud noise.

If the HDMI device (Receiver, TV) is not compatible

with compressed formats (Dolby digital, DTS), the

audio signal outputs as PCM.

▪

•

Auto : Select this to have the player

automatically set the best picture for the DVD

you’re watching.

Secondary and Effect audio will not be heard with

regular DVDs.

▪

•

Video : Select for the best picture quality from

concert or TV show DVDs.

Some Blu-ray Discs do not have Secondary and

Effect audio.

Still Mode

Set the type of picture shown when you pause

DVD playback.

This Digital Output setup does not effect the analog

(L/R) audio or HDMI audio output to your TV.

It effects the optical and HDMI audio output when

connected to a receiver.

•

Auto : Automatically set the best still picture

If you play MPEG audio soundtracks, audio signal

outputs PCM regardless of Digital Output Selections

(PCM or Bitstream).

▪

depending on the content.

Frame : Select when pausing a scene with a

little action.

Field : Select when pausing a scene with a lot

of action.

ꢁꢀ

English

Digital Output Selection

Audio Stream

Setup

Definition

Connection

Dolby

Digital

Plus

Dolby

Digital

Dolby

TrueHD

DTS-HD DTS-HD

PCM

DTS

HRA

Decodes Primary,

Secondary and

Effect audio

Up to

PCM

7.1ch

Up to

PCM

5.1ch

Up to

PCM

7.1ch

Up to

PCM

7.1ch

Up to

PCM

6.1ch

Up to

PCM

7.1ch

Up to

PCM

7.1ch

HDMI

Receiver

PCM

streams together

into PCM audio.

Optical

PCM 2ch PCM 2ch PCM 2ch PCM 2ch PCM 2ch PCM 2ch PCM 2ch

Decodes Primary,

Secondary and

Effect audio

streams together

into PCM

audio, then re-

encodes the PCM

audio into DTS

bitstream.

HDMI/

Optical

Bitstream

(Re-encode)

DTS

Outputs only the

Primary audio

soundtrack (main

soundtrack of

the movie) so

that your receiver

can decode the

audio bitstream.

You will not hear

Secondary and

Effect audio.

Up to

PCM

Dolby

Digital

Plus

HDMI 1.3

Receiver

Dolby

DTS-HD DTS-HD

DTS

Digital

TrueHD

HRA

7.1ch

Bitstream

(Audiophile)

Dolby

Digital

Dolby

Digital

Dolby

Digital

Optical

PCM 2ch

DTS

Blu-ray Discs may include three audio streams.

PCM Downsampling

Set whether to downsample 96KHz signals.

Primary Audio : The audio soundtrack of the

main feature

Secondary Audio : Addional soundtrack such as

director or actor’s commentary.

Interactive Audio : Interactive sounds will be

heard when selected.

•

On : Select this when the Amplifier connected

to the player is not 96KHz compatible. 96KHz

signals will be down converted to 48KHz.

•

Off : Select this when the Amplifier connected

to the player is 96KHz compatible.

Interactive Audio is different on each Blu-ray

Disc.

NOTE

✎

Even when PCM Downsampling is set to Off, some

discs will only output downsampled audio through

the optical digital outputs.

▪

English

ꢁꢁ

Setup

HDMI

•

Cinema : Select this if you want to play

2-channel movie sound over multi-channels.

•

If your TV is not compatible with compressed

multi-channel formats (Dolby Digital, DTS), the

player may output PCM 2ch downmixed audio

even though you set Bitstream(either Re-encode

or Audiophile) on your setup menu.

Music : Select this if you want to play 2-channel

music sound over multi-channels.

NOTE

✎

If you are using HDMI receiver, this option is

available when you set Digital Output setup as PCM.

▪

•

If your TV is not compatible with PCM sampling

rates over 48kHz, the player may output 48kHz

downsampled PCM audio even though you set

PCM Downsampling to Off.

System

Initial Settings

Dynamic Range Control

By using Initial Settings, you can set language, TV

aspect and Network Settings, etc.

For more information on the settings, refer to the

corresponding section in this user manual.

(See pages 28~42)

You can listen at low volumes but still hear dialog

clearly.

This is only active when a Dolby Digital signal is

detected.

•

On : When Movie soundtracks are played at low

volume or from smaller speakers, the system

can apply appropriate compression to make

low-level content more intelligible and prevent

dramatic passages from getting too loud.

Off : You can enjoy the movie with the standard

Dynamic Range.

Internet@TV Screen Size

Set the Internet@TV Screen to the optimal size.

•

Size 1 : Display smaller application icons, you

may see some black on sides of screen.

Size 2 : Display normal application icons, image

may be too large for your TV screen.

Size 3 : Display larger application icons, image

may be too large for your TV screen.

Downmixing Mode

Set whether to downmix the multi-channel audio

into fewer channels.

•

Normal Stereo : Downmixes the multi-channel

audio into two channel stereo. Choose when

connected to equipment that does not support

virtual surround functions such as Dolby Pro

Logic.

Surround Compatible : Downmixes multi-

channel audio into surround compatible stereo.

Choose when connected to equipment that

supports virtual surround functions such as

Dolby Pro Logic.

Anynet+(HDMI-CEC)

Anynet+ is a convenient function that offers linked

operations with other Samsung players with the

Anynet+ feature.

To operate this function, connect this player to a

Samsung TV with an HDMI cable.

You can operate this player using a Samsung TV

remote control and start disc playback simply

•

by pressing the PLAY (

remote control.

) button on the TV’s

For more information, please see the TV user

manual.

DTS Neo:6

You can enjoy multi-channel sound from a simple

2-channel audio source.

•

On : Anynet+ functions will work.

Off : Anynet+ function will not work.

•

Off : Outputs a 2-channel audio signal through

the front speakers only.

ꢁꢂ

English

NOTE

The total size of BD Data Management may differ,

depending on the software version.

✎

▪

This function is not available if the HDMI cable does

▪

not support CEC.

If your Samsung TV has an n logo, then it

supports the Anynet+ function.

Clock

Set time-related functions.

Depending on your TV, certain HDMI output

resolutions may not work.

Please refer to the user manual of your TV.

Settings

Display

Audio

Clock

: Auto

Clock Mode

Clock Set

Time Zone

DST

System

Network

Language

Security

General

Support

BD Data Management

Enables you to manage the downloaded contents

from a Blu-ray disc that supports the BD-LIVE

service.

You can check the device information including

the storage size, delete the BD data or change the

Flash memory device.

: GMT + 0:00

: Off

> Move " Enter ' Return

Choose your preferred method of setting clock.

•

Clock Mode : You can set it to Auto or

Manual.

Settings

If you select Manual, the Clock Set menu will

be activated while DST will be deactivated.

Clock Set : You can specify the current time

and date manually.

Time Zone : You can specify the time zone that

is applicable to your area.

DST : You can set DST (Daylight Saving Time)

on or off.

Display

Audio

BD Data Management

Current Device : External Memory

System

Network

Language

Security

General

Support

•

Total Size

: 955MB

: 949MB

Available Size

Delete BD Data

Change Device

: External Memory

" Select ' Return

Delete all BD data in the storage.

DivX(R) Registration

View DivX(R) VOD Registration Code to purchase

and play DivX(R) VOD content.

Description of Device(Storage) Information on

the Player

•

Total Size : Total size of the Device(Storage).

•

Available Size : Available size of the Device

(Storage).

Settings

NOTE

✎

Display

Audio

Initial Setting

Disc Menu

Audio

In the external memory mode, disc playback will

be stopped if you disconnect the USB device in the

middle of the playback.

▪

System

Network

Language

Security

General

Support

DivX(R) Video On Demand

Subtitle

Your registration code is : XXXXXXXXXX

To learn more visit www.divx.com/vod

Only those USB devices formatted in FAT file system

(DOS 8.3 volume label) are supported, and it is

recommended to use USB devices that support USB

2.0 protocol, 4 MB/sec or faster read/write speed.

▪

A USB HDD device cannot be used for BD Data

storage (BD-LIVE).

▪

NOTE

✎

The Resume Play function may not work after

formatting the storage device.

This option is not activated if you select OK.

To activate this option, please activate the DivX(R)

Deactivation.

▪

English

ꢁꢃ

Setup

DivX(R) Deactivation

Wired Network

Select this to get a new registration code.

1. In the Network Settings menu, press the ▲▼

buttons to select Network Settings, and then

press the ENTER button.

Settings

The Internet Protocol Setup screen appears.

Display

Audio

Initial Setting

Disc Menu

Audio

2. Press the ► button, then select Auto or

System

Network

Language

Security

General

Support

Manual, and then press the ENTER button.

Subtitle

Do you want to deactivate your device?

Setting Up a Wired Connection - Auto

Yes

1. If you selected Auto, the Network Function

acquires and fills in the values for IP Address,

Subnet Mask, etc., automatically.

NOTE

✎

This process can take up to five minutes.

NOTE

▪

✎

This function can be operated when DivX(R)

Registration function is deactivated.

▪

Settings

Display

Network Settings

Internet Protocol Setup : Auto

Audio

IP Address

Subnet Mask

Gateway

Network Setup

System

Network

Language

To begin setting up the network connection for

your player, follow these steps:

DNS

: Auto

Security

General

Support

DNS Server

1. In the Home menu, press the ◄► buttons

to select the Settings, and then press the

ENTER button.

> Move " Select ' Return

2. Press the ▲▼ buttons to select Network, and

2. After the Network Function has acquired the

network values, press the RETURN button.

Then, run a Network Test to ensure the player

has connected to your network (See page 39).

then press the ENTER button.

3. Press the ▲▼ buttons to select Network

Settings, and then press the ENTER button.

4. Press the ▲▼ buttons to select Network

3. If the Network Function does not acquire the

network values or you selected Manual, go to

the directions for Manual Setup.

Type, and then press the ENTER button.

5. Press the ▲▼ buttons to select Wired or

Wireless, and then press the ENTER button.

6. Go to the next section.

Network Settings

Please contact your ISP to find out if your IP

address is static or dynamic. If it is dynamic, we

recommend using the Auto setting. This is the

easiest and will work in the majority of cases. If it is

static, you must use the manual set up procedure.

Directions for wired networks are below. Directions

for wireless networks are after the directions for

wired networks.

ꢁꢄ

English

Setting Up a Wired Connection - Manual

9. Press the RETURN button on your remote.

If the Auto Setting does not work, you’ll need to

set the Network Setting values manually.

10. Run a Network Test to ensure the player has

connected to your network (See page 39).

To get the Network setting values from most

Windows computers, follow these steps:

Wireless Network

1. Right click the Network icon on the bottom

You can setup the wireless network three ways:

right of the screen.

•

Using PBC (WPS)

Using the Auto Network Search function.

Manually.

2. In the pop-up menu, click Status.

3. On the dialog that appears, click the Support

tab.

Each method is described below.

4. On the Support tab, click the Details button.

Setting Up the Wireless Network Connection

- PBC (WPS)

The easiest way to set up the wireless network

connection is using the PBC (WPS) function.

If your wireless router has a PBC (WPS) button,

follow these steps:

The Network settings are displayed.

To enter the Network settings into your player,

follow these steps:

1. On the Internet Protocol Setup screen, press

the ENTER button.

2. Press the ▲▼ buttons to select Manual, and

1. In the Network Settings menu, press the ▲▼

buttons to select Network Settings, and then

press the ENTER button.

then press the ENTER button.

3. Press the ▼ button to go to the first entry field

The Internet Protocol Setup screen appears.

(IP Address).

2. Press the RED(A) button on the remote

control.

Settings

Network Settings

3. Press the PBC (WPS) button on your router

within two minutes. Your player displays the

Network Selection Screen, and automatically

acquires all the network setting values it

needs and connects to your network. When

it is done, it displays an OK button. Press the

ENTER button on your remote.

Display

Audio

Internet Protocol Setup : Manual

IP Address

Subnet Mask

Gateway

System

Network

Language

255 255 255

DNS

: Manual

Security

General

Support

DNS Server

> Move " Select ' Return

Select to conﬁgure your network type and IP address, or to perform a Network Test.

4. After the network connection is set up, press

the RETURN button to exit the Network

Setting screen.

4. Use the number buttons on your remote to

enter numbers.

5. When done with each field, use the ► button

to move successively to the next field.

You can also use the other arrow buttons to

move up, down, and back.

6. Enter the IP Address, Subnet Mask, and

Gateway values.

7. Press the ▼ button to go to DNS.

8. Press the ▼ button to go to the first DNS

entry field. Enter the numbers as above.

English

ꢁꢅ

Setup

Setting Up the Wireless Network Connection

5. In the list of networks, press the ▲▼ buttons

to select a network, and then press the

ENTER button.

- Auto Network Search

Most wireless networks have an optional security

system that requires devices that access the

network to transmit an encrypted security code

called an Access or Security Key. The Security

Key is based on a Pass Phrase, typically a word

or a series of letters and numbers of a specified

length you were asked to enter when you set up

security for your wireless network. If you use this

method of setting up the network connection, and

have a Security Key for your wireless network,

you will have to enter the Pass Phrase during the

setup process.

6. If the PIN/Security pop-up appears, go to

Step 7. If the Network Connecting Screen

appears, go to Step 11.

7. Press the ▲▼ buttons to select PIN or

Security.

For most home networks, you would select

Security (for Security Key).

8. On the Security screen, enter your network’s

Pass Phrase.

NOTE

✎

You should be able to find the Pass Phrase on one of

the set up screens you used to set up your router or

modem.

▪

Setting Up the Network Connection

To set up the wireless connection using Auto

Network Search, follow these steps:

9. To enter the Pass Phrase, follow these

1. In the Network Settings menu, press the ▲▼

buttons to select Network Settings, and then

press the ENTER button.

general directions:

•

Press the number keys on your remote to

enter numbers.

The Internet Protocol Setup screen appears.

•

Use the arrow keys on your remote to move

from button to button on the Security Key

screen.

2. Press the ▲▼ buttons to select the Internet

Protocol Setup, and then press the ENTER

button.

•

To enter letters, move to the button labeled

3. Press the ▲▼ buttons to select Auto or

a/A/1/ , and then press the ENTER button.



Manual, and then press the ENTER button.

Each time you press the ENTER button,

4. If you selected Auto, press the ▲ button to

go to Access Point Selection, and then

press the ENTER button.

you change the kind of characters you can

enter (a/A/1/ ).



•

To enter a letter, press the number button

that corresponds to the letter. Pressing the

button repeatedly changes the letter.

The Network function searches for available

wireless networks.

When done, it displays a list of the available

networks.

To delete the last letter or number you

entered, move to the Delete button, and

then press the ENTER button.

Settings

To clear all entered letters and numbers,

move to the Clear key, and then press the

ENTER button. You can also just press the

RED(A) button on your remote.

Display

Audio

Network Settings

Network Selection

System

Network

Language

Security

General

Support

Connecting to network.

Network Name(SSID) : shj

10. When done, press the YELLOW(C) button

on your remote, or move to the Done button,

and then press the ENTER button.

Stop

" Select ' Return

The Network Connecting screen appears.

11. Wait until the connection confirmation

message is displayed, and then press the

ENTER button. The Network Settings screen

reappears.

ꢁꢆ

English

12. To test the connection, press the ▼ button

to select Network Test, and then press the

ENTER button.

6. Enter the IP Address, Subnet Mask, and

Gateway values.

7. Press the ▼ to go to DNS.

8. Press the ▼ button to go to the first DNS

Setting Up the Wireless Network Connection

- Manual

entry field. Enter the numbers as above.

9. When done, press the ▲ button to return to

Access Point Selection. Select the network,

and then press the ENTER button.

If the Auto Setting does not work, you need to

enter the Network settng values manually.

To get the Network setting values from most

Windows computers, follow these steps:

10. Go to Step 6 in the Automatic Wireless

procedure above, and follow the directions

from that point on.

1. Right click the Network icon on the bottom

right of the screen.

2. In the pop-up menu, click Status.

Network Test

3. On the dialog that appears, click the Support

Use this menu to connect the wired network

or check whether your network connection is

working or not.

tab.

4. On the Support tab, click the Details button.

The Network settings are displayed.

To Enter the Network settings into your player,

follow these steps:

Settings

Display

Audio

Network Test

1. On the Internet Protocol Setup screen, press



MAC Address (00:00:00:00:00:00)

IP Address,Subnet Mask,Gateway,DNS Server

Gateway Ping

System

Network

Language

Security

General

Support

the ENTER button.

2. Press the ▲▼ buttons to select Manual, and

Internet Service Test

then press the ENTER button.

Network testing...

3. Press the ▼ button to go to the first entry field

Test your Internet Protocol setup to see if it works correctly.

(IP Address).

Settings

Network Settings

Display

Audio

Access Point Selection : Not Selected

Internet Protocol Setup : Manual

Network Status

Check whether a connection to the network and

the Internet have been established.

System

Network

Language

Security

General

Support

IP Address

Subnet Mask

Gateway

255 255 255

DNS

: Manual

DNS Server

PBC (WPS) > Move " Select ' Return

BD-LIVE Internet Connection

Set to allow internet connection when BD-LIVE

service is used.

4. Use the number buttons to enter numbers.

•

Allow (All) : The Internet connection will be

allowed for all BD-LIVE contents.

5. When done with each field, use the ► button

to move successively to the next field.

You can also use the other arrow buttons to

move up, down, and back.

•

Allow (Valid Only) : The Internet connection will

be allowed only for BD-LIVE contents containing

a valid certificate.

•

Prohibit : No Internet connection will be allowed

for any BD-LIVE content.

English

ꢁꢇ

Setup

NOTE

✎

Settings

What is a valid certificate?

▪

Display

Audio

Parental Rating

 Off

When the player uses BD-LIVE to send the disc data

and a request to the server to certify the disc, the

server uses the transferred data to check if the disc is

valid and sends the certificate back to the player.

Change Password

8(Adults)

System

Network

Language

Security

General

Support

The Internet connection may be restricted while you

are using BD-LIVE contents.

▪

Language

Change Password

Change the 4-digit password used to access

security functions.

You can select the language you prefer for home

menu, disc menu, etc.

•

On-Screen Menu : Select the language for the

on-screen displays.

If you forgot your password

•

Disc Menu : Select the language for the disc

menu displays.

1. Remove the disc.

•

Audio : Select the language for disc audio.

Subtitle : Select the language for disc subtitles.

2. Press and hold the STOP (

) button on the

front panel for 5 seconds or more.

All settings will revert to the factory settings.

NOTE

✎

The selected language will only appear if it is

▪

NOTE

supported on the disc.

✎

When the factory default settings are restored, all

the user data stored in the BD data will be deleted.

▪

Security

General

When you operate this menu for the first time,

password setup screen will be displayed.

Enter the desired 4-digit password using the

number buttons. (Default password is set to 0000.)

Background

Change the background theme of the menu screen.

Parental Rating

Settings

Background

Display

Audio

System

Network

Language

Security

This function works in conjunction with Blu-ray

Disc/DVDs that have been assigned a rating,

which helps you control the types of Blu-ray Disc/

DVDs that your family watches.

Skin 1

Skin 2

Skin 3

Skin 4

Select the rating level you want to set.

Skin 5

General

A larger number indicates that the program is

intended for adult use only. For example, if you

select up to Level 6, discs that contain Level 7, 8

will not play.

Support

> Move " Select ' Return

ꢂ0

English

Support

Energy Saving

You can reduce power consumption by setting

the front panel to turn off automatically when there

is no operation for 5 seconds.

Software Upgrade

This menu allows you to upgrade software

for performance improvements or additional

services. You can check the current software

version, upgrade using the internet and set the

Auto upgrade notification. If the player is properly

connected to the network by cable or wirelessly,

the player will automatically connect to Samsung’s

website each time it is turned on and download

update files if any valid upgrade exists.

•

On : The front panel will automatically turn off

when there is no operation for 5 seconds.

•

Off : Energy Saving function is not used.

Front Display

Change the brightness of the front panel.

•

Auto : Dim during playback.

Dim : Dim the display window.

Bright : Brighten the display window.

Settings

Display

Audio

Software Upgrade

Disc Menu

Power On/Off Sound

Play a melody when the player is turned on and off.

System

Network

Language

Security

General

Support

Audio

Current Version

: XXX-XXXXXXXXX

Subtitle

By Internet

Auto Upgrade Notiﬁcation : On

•

On : Turn Power Sound On.

Off : Turn Power Sound Off.

" Select ' Return

1. To select By Internet, press the ENTER

button.

A popup message will appear if an update is

available.

2. If you select Yes, the player will turn off

automatically before restarting.

(Never turn it on manually.)

3. The update progress popup will appear.

When the update is completed, the player will

turn back off automatically.

4. Press the POWER button to turn on the

player.

NOTE

✎

The Update will be completed when the player turns

▪

off after restarting. Press the POWER button to turn

on the updated player for your use.

Never turn off or on the player manually during the

update process.

Samsung Electronics shall take no legal responsibility

for player malfunction caused an unstable internet

connection or consumer negligence during software

upgrade.

English

ꢂ1

Setup

You can also update software in any of the two

ways as follows: Software update is the same as

in the By Internet menu.

•

USB : Visit www.samsung.com/bluraysupport,

then download and store the latest software

(RUF file) into a USB flash drive. Connect

the USB flash drive to the USB port of the

player (disc tray must be empty) to update the

software, then follow the on-screen instructions.

•

CD/DVD : Visit www.samsung.com/

bluraysupport, download and write the latest

software (RUF file) onto a disc. Insert and play

the disc in the player to start the update, then

follow the on-screen instructions.

NOTE

✎

Software upgrades using the USB Host jack must be

performed with no disc inside.

▪

If you want to cancel the upgrade in the process of

downloading the upgrade data, press the ENTER

button.

▪

When the system upgrade is done, check the

software details in the software Upgrade menu.

▪

Do not turn off the player during the System

Upgrade, as it may cause the player to not work

properly.

Software upgrades using the USB Host jack must be

performed with a USB memory flash stick only.

▪

Contact Samsung

Provide contact information for assistance with

your player.

ꢂꢀ

English

Basic Functions

Playing a Disc

Using the Disc menu/Title menu/

Popup menu

Playback

Using the Disc Menu

1. Press the OPEN/CLOSE (

) button to

open the disc tray.

2. Place a disc gently into the tray with the disc’s

1. During playback, press the DISC

label facing up.

MENU button on the remote control.

3. Press the OPEN/CLOSE (

) button to

2. Press the ▲▼◄► buttons to make

the desired selection, then press the

ENTER button.

close the disc tray.

4. Press the PLAY (

) button.

NOTE

Playback related buttons

✎

Depending on the disc, the menu items may differ

▪

PLAY (

STOP (

PAUSE (

)

Starts playback.

Stops playback.

and this menu may not be available.

Using the Title Menu

•

If pressing the button once : The

stop position will be memorized.

)

•

If pressing the button twice : The

stop position will be not memorized.

1. During playback, press the TITLE

)

Pauses playback.

MENU button on the remote control.

2. Press the ▲▼◄► buttons to make

the desired selection, then press the

ENTER button.

Disc Structure

The contents of disc are usually divided as below.

NOTE

✎

•

Blu-ray Disc, DVD-VIDEO

Depending on the disc, the menu items may differ

and this menu may not be available.

▪

title 1

title 2

chapter 1 chapter 2 chapter 1 chapter 2 chapter 3

Playing the Title List

•

Audio CD (CD-DA)

track 1

track 2

track 3

track 4

track 5

file 3

�

MP3, WMA, DivX, MKV and MP4

folder (group) 1 folder (group) 2

file 1 file 2 file 2

1. During playback, press the DISC

MENU or TITLE MENU button.

2. Press the ▲▼ buttons to select an

entry you want to play from Title List,

then press the ENTER button.

file 1

NOTE

✎

If your disc has the playlist, press the GREEN(B)

button to go to the Playlist.

▪

English

ꢂꢁ

Basic Functions

Using the Popup Menu

Skipping Chapters

h�Z��

)

•

During playback, press the SKIP (

1. During playback, press the POPUP

button.

MENU button on the remote control.

If you press the SKIP (

the next chapter.

) button, it moves to

2. Press the ▲▼◄► buttons or ENTER

button to select the desired menu.

If you press the SKIP (

) button, it moves to

NOTE

✎

the beginning of the chapter. One more press

makes it move to the beginning of the previous

chapter.

Depending on the disc, the menu items may differ

▪

and this menu may not be available.

Using the Search and Skip Functions

Slow Motion Play/Step Motion Play

During play, you can search quickly through a

chapter or track, and use the skip function to

jump to the next selection.

Slow Motion Play

h�Z��

)

Searching for a Desired Scene

•

In pause mode, press the SEARCH (

button.

h�Z��

)

If you press the SEARCH (

playback speed is reduced to

) button, the

•

During playback, press the SEARCH (

button.

1/8

1/4

1/2

Each time you press the SEARCH (

)

•

To return to normal speed playback, press the

PLAY ( ) button.

button, the playback speed will change as follows.

NOTE

✎

BD-ROM,

)

1 

)

2 

)

3 

BD-RE/-R,

DVD-RW/-R,

DVD+RW/+R,

DVD-VIDEO

No sound is heard during slow mode.

▪

4 

5 

6 

)

(

Slow motion operates only in the forward direction.

(

1 

4 

(

2 

5 

(

3 

6 

Step Motion Play

)

(

1 

)

(

2 

)

(

DivX, MKV, MP4

h�Z��

) button.

•

To return to normal speed playback, press the

PLAY ( ) button.

•

In pause mode, press the PAUSE (

Each time the PAUSE (

a new frame will appear.

) button is pressed,

NOTE

✎

•

To return to normal speed playback, press the

PLAY ( ) button.

No sound is heard during search mode.

▪

NOTE

✎

No sound is heard during step mode.

▪

Step motion operates only in the forward direction.

ꢂꢂ

English

4. Press the ENTER button at the point where

Repeat Playback

you want repeat play to stop (B).

5. To return to normal play, press the REPEAT

Repeat the Title or Chapter

button again.

6. Press the ENTER button.

h�Z�

NOTE

✎

Repeat the disc title or chapter.

If you set point (B) before 5 seconds has lapsed, the

prohibition message will appear.

▪

Depending on the disc, the Repeat function may

not be available.

1. During playback, press the REPEAT

Using the TOOLS button

button on the remote control.

During playback, you can operate disc

menu by pressing the TOOLS button.

2. Press the ▲▼ buttons to select Chapter or

Title, then press the ENTER button.

•

TOOLS Menu Screen

Repeat

Chapter

Tools

Title

1/1

4/21

00:12:06

1/7 ENG Multi CH

1/6 ENG

1/1

Chapter

Playing Time

Audio

Subtitle

Angle

3. To return to normal play, press the REPEAT

button again.

BONUSVIEW Video :

BONUSVIEW Audio :

Picture Setting

Off

0/1 Off

4. Press the ▲▼ buttons to select Off, the press

the ENTER button.

< Change " Select

Repeat the Section

NOTE

✎

h�Z�

Depending on the disc, the TOOLS menu may differ.

▪

1. During playback, press the REPEAT

button on the remote control.

Moving to a Desired Scene Directly

h�Z�

1. During playback, press the TOOLS button.

2. Press the ▲▼ buttons to select Repeat A-B.

Repeat

Repeat A-B : Off

" Mark A

2. Press the ▲▼ buttons to select Title, Chapter

or Playing Time.

3. Enter the desired Title, Chapter or Playing

Time using the number buttons, then press

the ENTER button.

3. Press the ENTER button at the point where

you want repeat play to start (A).

English

ꢂꢃ

Basic Functions

Selecting the Audio Language

NOTE

✎

Depending on the Blu-ray Disc / DVD, you may be

able to change the desired subtitle in the Disc Menu.

▪

h�Z�

Press the DISC MENU button.

You can also operate this function by

pressing the AUDIO button on the

remote control.

This function depends on what subtitles are encoded

on the disc and may not be available on all Blu-ray

Discs/DVDs.

▪

A Blu-ray Disc can contain up to 255 subtitle

languages and a DVD up to 32.

▪

1. During playback, press the TOOLS button.

Information about the primary / secondary mode

will also be displayed if the Blu-ray Disc has a

BONUSVIEW section.

2. Press the ▲▼ buttons to select Audio.

3. Press the ◄► buttons to select the desired

audio language.

This function changes both the primary and

secondary subtitles at the same time.

▪

NOTE

✎

The ◄► indicator will not be displayed on the

screen if the BONUSVIEW section does not contain

any BONUSVIEW audio settings.

▪

The total number of subtitles is the sum of the

primary and secondary ones.

If you press the SUBTITLE button on the remote

control, the subtitle bar will be displayed.

Press the RETURN button to remove the subtitle bar.

Information about the primary / secondary mode

will be also displayed if the Blu-ray Disc has a

BONUSVIEW section.

▪

Use the ◄► button to switch between primary and

secondary audio modes.

Changing the Camera Angle

This function depends on what audio languages are

encoded on the disc and may not be available.

▪

A Blu-ray Disc can contain up to 32 audio languages

and a DVD up to 8.

When a Blu-ray Disc/DVD contains multiple angles

of a particular scene, you can use the ANGLE

function.

Some Blu-ray Discs may allow you to select either

the multi-channel LPCM or Dolby digital audio

soundtrack in English.

1. During playback, press the TOOLS button.

2. Press the ▲▼ buttons to select Angle.

If you press the AUDIO button on the remote control,

Audio bar will be displayed.

Press the RETURN button to remove the Audio bar.

▪

3. Press the ◄► buttons to select the desired

Angle.

Selecting the Picture Setting

Selecting the Subtitle Language

h�Z�

This function enables you to adjust video quality

when you are connected to a TV via HDMI.

hZ�

You can also operate this function by

pressing the SUBTITLE button on the

remote control.

1. During playback, press the TOOLS button.

2. Press the ▲▼ buttons to select Picture Setting,

then press the ENTER button.

1. During playback, press the TOOLS button.

3. Press the ◄► buttons to select the desired

2. Press the ▲▼ buttons to select Subtitle.

Picture Setting, then press the ENTER button.

3. Press the ◄► buttons to select the desired

subtitle language.

ꢂꢄ

English

•

Dynamic : Choose this setting to increase

Listening to Music

Sharpness.

Normal : Choose this setting for most

viewing applications.

o�

Buttons on the Remote Control

used for Music Playback

Movie : This is the best setting for watching

movies.

User : The user can adjust the sharpness

and noise reduction function respectively.

Setting BONUSVIEW

SUBTITLE

AUDIO

The BONUSVIEW feature allows you to view

additional content (such as commentaries) in a

small screen window while the movie is playing.

This function is only available if the disc has the

bonusview feature.

TOOLS

INFO

EXIT

You can also operate this function by

pressing the BONUSVIEW button on

the remote control.

RETURN

1. During playback, press the TOOLS button.

INTERNET@ FULL SCREEN REPEAT

2. Press the ▲▼ buttons to select BONUSVIEW

Video or BONUSVIEW Audio.

SEARCH buttons : Fast Play.

(Audio CD (CD-DA) only)

3. Press the ◄► buttons to select the desired

bonusview.

NOTE

PAUSE button : Pauses playback.

✎

If you switch from BONUSVIEW Video, BONUSVIEW

Audio will change automatically in accordance with

BONUSVIEW Video.

▪

PLAY button : Plays the currently selected track.

▲▼ buttons : Selects a track in the Music List or

Playlist.

Tools

YELLOW(C) button : Select or deselect a track in

the music list.

BONUSVIEW Video <

BONUSVIEW Audio :

Picture Setting

Off

0/1 Off

< Change " Select

REPEAT button : Selects the play mode in the

Playlist.

ENTER button : Plays and pauses the selected

track.

STOP button : Stops a track

SKIP button : During playback, moves to the next

page in the Music List or moves to the next track in

the Playlist.

English

ꢂꢅ

Basic Functions

SKIP button : During playback, moves to the

previous page in the Music List or moves to the

previous track in the Playlist.

Shows the current play time/total play time.

Displays the current playback status

Displays the repeated playback status.

If you press this button after three seconds of

playback in the Playlist, the current track will be

replayed from the beginning. But, if you press this

button within three seconds after playback starts in

the Playlist, the previous track will be played.

2. Press the ▲▼ buttons to select the track

you want to play, and then press the ENTER

button.

NUMBER button : During the Playlist playback,

press the desired track number. The selected track

will be played.

Repeat an Audio CD (CD-DA)/MP3

1. During the Playlist playback, press the

REPEAT button.

2. Select the desired play mode by

Playing an Audio CD (CD-DA)/MP3

pressing the REPEAT button repeatedly.

1. Insert an Audio CD (CD-DA) or an MP3 Disc

Tracks on a disc are

into the disc tray.

Audio CD

played in the order in

•

For an Audio CD (CD-DA), the first track will

be played automatically.

Off

(CD-DA)/MP3 which they were recorded

on the disc.

•

For an MP3 disc, press the ◄► buttons

to select Music, then press the ENTER

button.

Audio CD

(

) Track

) One

) All

Current track is repeated.

(CD-DA)

MP3

Current track is repeated.

All tracks are repeated.

Audio CD (CD-DA)/MP3 Screen Elements

Audio CD

(CD-DA)/MP3

The random option plays

a disc’s track in random

order.

Audio CD

Playlist

1/3

(

) Shuffle

TRACK 001

(CD-DA)/MP3

TRACK 001

TRACK 002

TRACK 003

TRACK 004

TRACK 005

TRACK 006

05:57

04:27

04:07

03:41

03:17

Playlist

00:08 / 05:57

1. Insert an Audio CD (CD-DA) or an MP3 Disc

03:35

into the disc tray.

Pause

Tools

Return

•

For an Audio CD (CD-DA), the first track will

be played automatically.

•

For an MP3 disc, press the ◄► buttons

to select Music, then press the ENTER

button.

Displays the music information.

Displays the playlist.

2. To move to the Music List, press the STOP (

or RETURN button.

)

The Music List screen is displayed.

Shows the current page/total pages.

Displays buttons available.

ꢂꢆ

English

3. Press the ▲▼◄► buttons to move desired

track, then press the YELLOW(C) button to

check desired tracks.

Playing back a Picture

Repeat this procedure to select additional

tracks.

Playing a JPEG Disc

Music TRACK 003

3 ﬁles selected 1/2 Page

1. Insert a JPEG disc into the disc tray.

TRACK 001