Rockford Fosgate FNP2414 User Manual

FNP2414  
FNP2514  
FNP2614U  
FNP2614  
Installation  
& Operation  
COMPONENT SYSTEMS  
Páginas de Referencia para la Instalación  
Schéma d’Installation  
Installations Beiblatt  
Istruzioni di Installation  
TABLE OF CONTENTS  
Introduction ..............................................................................................1  
Package Contents......................................................................................1  
Installation Considerations ........................................................................2  
Mounting Location....................................................................................3  
Installation ................................................................................................4  
Troubleshooting ........................................................................................7  
Specifications............................................................................................8  
Warranty Information................................................................................9  
International Information ........................................................................10  
GETTING STARTED  
Welcome to Rockford Fosgate! This manual is designed to provide  
information for the owner, salesperson and installer. For those of you  
who want quick information on how to install this product, please turn  
to the Installation Section of this manual or refer to the icons listed  
below. Other information can be located by using the Table of  
Contents. We, at Rockford Fosgate, have worked very hard to make  
sure all the information in this manual is current. But, as we are con-  
stantly finding new ways to improve our product, this information is  
subject to change without notice.  
I
TROUBLE-  
S
H
O
O
T
I
N
G
N
S
T
A
L
L
A
T
I
O
N
+-  
Sections marked  
INSTALLATION  
Sections marked  
TROUBLESHOOTING  
include slam dunk”  
wiring connections  
include recommendations for  
curing installation problems  
Visit our website for the latest information on all Rockford products.  
ii –  
INTRODUCTION  
This manual provides information on the features and installation of the  
fanaticP System. We suggest you save this manual for future reference. We  
strongly recommend you have your Authorized Rockford Fosgate Dealer  
install the fanaticP System. If you do choose to install the system yourself,  
please be sure to read the entire manual before beginning.  
PACKAGE CONTENTS  
FNP2414  
4" fanaticP Component System  
(2) FNP2401 Tweeters: includes 3/4" [20mm]  
mylar dome tweeter, flush mount housing,  
surface mount housing, wedge mount housing  
(2) Tweeter Mounting Brackets  
(2) .110 Male Fast-on Connectors  
(2) FNP2404 4" Midrange Speakers  
(2) 4" Speaker Grilles  
(2) 4" Speaker Grille Rings  
(2) FNP242x 2-Way Crossovers  
(8) #8 x 1.25 Phillips Screws  
(20') 18 Gauge Speaker Wire  
(4) #8-32 x .500 Screws  
(8) #8 x .75 Phillips Screws  
(2) .110 Female Fast-on Connectors  
FNP2514  
5-1/4" fanaticP Component System  
(2) FNP2401 Tweeters: includes 3/4" [20mm]  
mylar dome tweeter, flush mount housing,  
surface mount housing, wedge mount housing  
(2) Tweeter Mounting Brackets  
(2) .110 Male Fast-on Connectors  
(2) FNP2405 5-14" Midrange Speakers  
(2) 5-14" Speaker Grilles  
(2) 5-14" Speaker Grille Rings  
(2) FNP242x 2-Way Crossovers  
(8) #8 x 1.25 Phillips Screws  
(20') 18 Gauge Speaker Wire  
(4) #8-32 x .500 Screws  
(8) #8 x .75 Phillips Screws  
(2) .110 Female Fast-on Connectors  
FNP2614U  
6" fanaticP Component System  
(2) FNP2401 Tweeters: includes 3/4" [20mm]  
mylar dome tweeter, flush mount housing,  
surface mount housing, wedge mount housing  
(2) Tweeter Mounting Brackets  
(2) .110 Male Fast-on Connectors  
(2) FNP2406U 6" Midrange Speakers  
(2) 6" Speaker Grilles  
(2) 6" Speaker Grille Rings  
(4) #8-32 x .500 Screws  
(2) FNP242x 2-Way Crossovers  
(8) #8 x 1.25 Phillips Screws  
(20') 18 Gauge Speaker Wire  
(8) #8 x .75 Phillips Screws  
(2) .110 Female Fast-on Connectors  
FNP2614  
6-1/2" fanaticP Component System  
(2) FNP2401 Tweeters: includes 3/4" [20mm]  
mylar dome tweeter, flush mount housing,  
surface mount housing, wedge mount housing  
(2) Tweeter Mounting Brackets  
(2) .110 Male Fast-on Connectors  
(2) FNP2406 6-12" Midrange Speakers  
(2) 6-12" Speaker Grilles  
(2) 6-12" Speaker Grille Rings  
(2) FNP242x 2-Way Crossovers  
(8) #8 x 1.25 Phillips Screws  
(20') 18 Gauge Speaker Wire  
(4) #8-32 x .500 Screws  
(8) #8 x .75 Phillips Screws  
(2) .110 Female Fast-on Connectors  
1 –  
I
N
S
T
A
L
L
A
T
I
O
N
INSTALLATION CONSIDERATIONS  
+-  
Tools Needed  
The following is a list of some of the tools necessary for the installation of  
your speakers:  
Power Drill with assorted bits  
#2 Phillips Screwdriver  
Tape Measure  
Voltmeter  
General  
1. For safety, disconnect the negative lead from the battery prior to beginning  
the installation.  
2. Never run wires underneath the vehicle. Running the wires inside the vehi-  
cle provides the best protection.  
3. Avoid running wires over or through sharp edges. Use rubber or plastic  
grommets to protect any wires routed through metal.  
4. Mount the speakers/crossovers away from electrical sources (other than the  
amplifier) i.e., power cables, electronic fuel pumps, vehicle computers, and  
other potential noise sources.  
5. Mount the speakers/crossovers away from areas of extreme heat or moisture.  
Speakers  
1. Make sure there is an area large enough of the speaker to mount.  
Warning! Failure to do this can cause damage to the speaker if the  
speaker frame is bent during installation.  
2. Check to see that the location is deep enough for the speaker(s) and the  
location does not interfere with the normal operation of the vehicle.  
3. When mounting the speaker(s) in the door of a vehicle, make sure the  
speaker(s) do not interfere with either the door or window operation.  
4. When mounting the speaker(s) on the rear deck of the vehicle, check the  
operation of the rear hatch or trunk lid. Make sure the torsion bars and  
other moving parts are not obstructed by the speaker(s) installation.  
Please refer to the Specifications section of this manual for proper  
mounting diameter and depth of the speaker(s).  
Crossovers  
1. Make sure there is a flat area large enough for the crossover to mount.  
2. For best results, mount the crossover(s) next to the amplifier for a deco-  
rative finish to the installation and provide an easy upgrade (no new  
wires to run) for a bi-amp Rockford Fosgate system in the future.  
2 –  
MOUNTING LOCATION  
A solid front stage with a good image is one of the most difficult tasks to  
achieve in a vehicle. No car has the optimum listening environment. This  
makes proper sound staging very difficult to accomplish. Most speakers  
tend to be placed where they will fit easily, as opposed to where they can  
perform the best. The mounting location of your speakers will have a great  
effect on the sound quality of your stereo system. The special care taken to  
place the speakers will yield many hours of listening enjoyment in return.  
Several important recommendations should be followed.  
Place the speakers where they have a direct path to the listening area.  
For the best integration between the midrange and tweeter, the tweeter  
should be placed less than 2" from the midrange (Figure 1).  
If you cannot place the tweeter less than 2"  
from the midrange, then place the tweeter  
more than 7" from the midrange. Placing the  
2" or less  
tweeter 2"-7" from the midrange can cause  
destructive interference (frequency response  
problems) which will affect the speaker's abil-  
ity to reproduce the frequency range around  
the crossover frequency of the system.  
Whenever possible, place the tweeter direct-  
ly above or below the midrange as this max-  
imizes the imaging (point source) capability  
of the speakers (Figure 2).  
Figure 1  
Figure 2-B  
Figure 2-A  
Sound radiated from a point sourceprovides the best stereo imaging  
because the separation of the acoustical centers between the midrange  
and tweeter for each channel is at the optimum distance. In a closed en-  
vironment such as an automobile, horizontal speaker alignment (Figure  
2-A) can cause severe amplitude and phase differences which will  
degrade not only the imaging, but also the frequency response. This is  
due to the path length differences between the midrange and tweeter.  
With a vertical alignment (Figure 2-B), the path length difference  
3 –  
between the midrange and tweeter are reduced to a minimum. The result  
is a negligible difference in path lengths between the midrange and  
tweeter regardless of the proximity of the listener to the speakers.  
Mounting the speaker with minimum path length difference will ensure  
the best staging and imaging possible from your audio system.  
I
N
INSTALLATION  
S
T
A
L
L
A
T
I
O
N
+-  
Mounting the Midrange  
1. Cut the proper size hole for the midrange/woofer.  
For the 4speaker, cut a 90mm (39") diameter hole  
16  
For the 5-1/4speaker, cut a 114mm (415") diameter hole  
32  
For the 6speaker, cut a 129mm (51") diameter hole  
For the 6-1/2speaker, cut a 139mm1(651") diameter hole  
2
2. Place the mounting ring over the mounting hole and mark the location  
of the screw mounting holes.  
3. Remove the ring. Drill the holes for the screws using a 1/8" drill bit.  
4. Route the wire through the hole.  
5. Attach the wires and be sure to observe the proper speaker polarity.  
6. Place the mounting ring over the speaker.  
7. Place the speaker into the hole and screw the speaker into place. Be  
careful not to bend the speaker frame during this step.  
8. Press the speaker grille into the mounting ring.  
4 –  
Flush Mount Tweeter  
Trim  
Ring  
Back  
Plate  
Tweeter  
Flush  
Housing  
Surface Mount Tweeter  
Surface  
Housing  
Tweeter Trim  
Ring  
Back  
Plate  
Wedge Mount Tweeter  
Tweeter  
Wedge  
Housing  
5 –  
Crossover Connections  
High-Passing the Midrange  
The fanaticP Component Systems are optimized for full range music repro-  
duction. In cases where a subwoofer is used, the midrange can be high-  
passed in order to prevent overlapping frequncies from the midrange into  
the subwoofer.  
1. Determine the frequency range that the subwoofer will play (i.e.: 20Hz-  
80Hz).  
2. Use the low-pass crossover frequency of the subwoofer system (i.e.:  
80Hz) as the high-pass crossover frequency for the midrange.  
3. Select the appropriate capacitor value (i.e.: 500µF) to properly high-pass  
the midrange.  
4. Place the capacitor in series with the "+" terminal of the speaker.  
Frequency  
(Hertz)  
Speaker  
(4 ohms)  
C1  
80Hz  
100Hz  
130Hz  
200Hz  
260Hz  
400Hz  
500µF  
400µF  
300µF  
200µF  
150µF  
100µF  
6 –  
TROUBLE-S  
H
O
O
T
I
N
G
TROUBLESHOOTING  
Symptom  
Diagnosis  
Remedy  
Wires between amplifier,  
crossover, or speakers not  
connected properly  
Check wiring, and repair or  
replace as needed  
No sound from  
speakers  
Amplifier has no output  
Check system with known  
working amplifier and repair  
or replace as needed  
Speaker wires are shorted  
to each other or to the  
chassis of the vehicle  
Check for shorts in the wiring  
with a volt/ohm meter, and  
repair or replace wires as  
needed  
Speakers are blown  
Check system with known  
working speaker, and repair or  
replace as needed  
Incorrect wiring between  
crossover and speakers  
Check wiring, and repair or  
replace as needed  
Distorted sound  
from speakers  
Excessive power from  
amplifier  
Tweeters “burn  
up” easily  
Check gain settings on ampli-  
fier and readjust as necessary  
Equalizer in system (if avail-  
able) has excessive boost in  
the high frequency range  
Check settings on equalizer  
and readjust as necessary  
Engine noise  
from one or  
more speakers  
Speaker wires shorted to  
chassis of vehicle  
Check for shorts in the wiring  
with a volt/ohm meter, and  
repair or replace wires as  
needed  
Speaker wires are routed  
near radiated noise source  
(power cables, vehicle com-  
puters, etc.)  
Re-route speaker wiring away  
from noise sources (refer to  
the Installation Considerations  
section of this manual)  
Crossover is mounted near  
radiated noise source  
(power cables, vehicle com-  
puters, etc.)  
Move crossovers away from  
noise sources (refer to the  
Installation Considerations  
section of this manual)  
7 –  
SPECIFICATIONS  
System Model Number FNP2414  
FNP2514  
FNP2614U  
FNP2614  
Midrange Model Number  
FNP2404  
4"  
FNP2405  
FNP2406U  
6"  
FNP2406  
1
1
Nominal Diameter  
5 "  
4
6 "  
2
Nominal Impedance  
4  
4Ω  
60Hz-6kHz  
60Hz  
4Ω  
4Ω  
55Hz-5kHz  
55Hz  
Frequency Response  
100Hz-8kHz  
100Hz  
.907  
61Hz-6kHz  
61Hz  
Fs (Hz)  
Qes  
.705  
.701  
.926  
Qms  
Qts  
3.372  
2.896  
2.58  
3.558  
.715  
.567  
.551  
.733  
3
Vas (ft /liter)  
.078/2.2  
.09/2.4  
84.9dB  
50 Watts  
90.48mm  
.29/8.1  
.11/2.9  
86.4dB  
50 Watts  
.335/9.5  
.11/2.9  
86.8dB  
50 Watts  
129mm  
.59/16.7  
.11/2.9  
87.1dB  
50 Watts  
139.06mm  
Xmax (in/mm)  
Sensitivity  
RMS Power Handling  
Mounting Diameter  
113.50mm  
15  
9
1
1
(3 ")  
(4  
")  
(5 ")  
16  
(5 ")  
2
16  
32  
3
3
3
45mm (1 ")  
4
1
63mm (2 ")  
2
Mounting Depth  
45mm (1 4")  
60mm (2 ")  
8
Model  
FNP2401  
Nominal Diameter  
Nominal Impedance  
Frequency Response  
Fs  
3/4" (20mm)  
4  
2.8kHz-20kHz  
2.8kHz  
Sensitivity  
91dB  
RMS Power Handling  
Mounting Diameter  
Mounting Depth  
50 Watts*  
See drawings  
See drawings  
* Power Ratings (PE) is established with recom-  
mended filter network  
Model  
FNP242x  
2-Way  
Crossover Type  
Crossover Frequency  
Crossover Slope  
6.3kHz @ 4Ω  
18dB/octave High-Pass  
Full-Range Low-Pass  
0.707 (Butterworth)  
Optical Compression  
See drawings  
Filter Q  
Tweeter Protection  
Dimensions  
(Specifications are subject to change without notice)  
8 –  
LIMITED WARRANTY INFORMATION  
Rockford Corporation offers a limited warranty on Rockford Fosgate products on the following terms:  
Length of Warranty  
1 year on speakers  
30 days on speaker B-stock (receipt required)  
90 days on electronic B-stock (receipt required)  
3 years on electronics  
1 year on source units  
What is Covered  
This warranty applies only to Rockford Fosgate products sold to consumers by Authorized Rockford  
Fosgate Dealers in the United States of America or its possessions. Product purchased by consumers  
from an Authorized Rockford Fosgate Dealer in another country are covered only by that countrys  
Distributor and not by Rockford Corporation.  
Who is Covered  
This warranty covers only the original purchaser of Rockford product purchased from an Authorized  
Rockford Fosgate Dealer in the United States. In order to receive service, the purchaser must provide  
Rockford with a copy of the receipt stating the customer name, dealer name, product purchased and  
date of purchase.  
Products found to be defective during the warranty period will be repaired or replaced (with a product  
deemed to be equivalent) at Rockford's discretion.  
What is Not Covered  
1. Damage caused by accident, abuse, improper operations, water, theft  
2. Any cost or expense related to the removal or reinstallation of product  
3. Service performed by anyone other than Rockford or an Authorized Rockford Fosgate Service Center  
4. Any product which has had the serial number defaced, altered, or removed  
5. Subsequent damage to other components  
6. Any product purchased outside the U.S.  
7. Any product not purchased from an Authorized Rockford Fosgate Dealer  
Limit on Implied Warranties  
Any implied warranties including warranties of fitness for use and merchantability are limited in dura-  
tion to the period of the express warranty set forth above. Some states do not allow limitations on the  
length of an implied warranty, so this limitation may not apply. No person is authorized to assume for  
Rockford Fosgate any other liability in connection with the sale of the product.  
How to Obtain Service  
Please call 1-800-669-9899 for Rockford Customer Service. You must obtain an RA# (Return  
Authorization number) to return any product to Rockford Fosgate. You are responsible for shipment of  
product to Rockford. Always include Proof of Purchase. Mark RA# on outside of shipping carton.  
Ship to: Electronics  
Ship to: Speakers  
Rockford Corporation  
Warranty Repair Department  
2055 E. 5th Street  
Rockford Acoustic Design  
(Receiving-speakers)  
609 Myrtle N.W.  
Tempe, AZ 85281  
RA#:_________________  
Grand Rapids, MI 49504  
RA#:_________________  
9 –  
LEA DETENIDAMENTE LAS SIGUIENTES INSTRUCCIONES DE INSTA-  
LACIÓN DEL PRODUCTO.  
INTRODUCCIÓN ESPAÑOL  
Este manual contiene información sobre la construcción, installación y fun-  
cionamiento de los sistemas fanaticP. Le recomendamos que conserve el  
manual para futuras consultas.  
Es preferible que la instalación de sistema fanaticP sea realizada por un dis-  
tribuidor autorizado Rockford Fosgate. Si prefiere realizar la instalación usted  
mismo, asegurese de leer el manual en su totalidad antes de comenzar.  
MONTAJE  
Le mejor interacción entre tweeter y medio se  
consigue si no están separados entre si más  
no superior a 5cm  
de 5 cenimetros (Figura 1).  
Figura 1  
I
N
S
T
A
L
L
A
T
I
O
N
INSTALACIÓN  
+-  
Montaje del altavoz de medios  
10 –  
1. Corte el agujero para el medio/woofer.  
Par el 102mm, corte un circulo de 90mm de diámetro  
Par el 133mm, corte un circulo de 114mm de diámetro  
Par el 152mm, corte un circulo de 129mm de diámetro  
Par el 165mm, corte un circulo de 139mm de diámetro  
2. Use los anillos de montaje de plástico como plantilla. Marque la posi-  
ción de los tornills de anclaje.  
3. Quite el anillo y perfore los agujeros con una broca de 3mm.  
4. Pase el cable de altavoz a través del agujero.  
5. Conecte los cables observando la polaridad. Mantenga los cables aleja-  
dos pe partes móviles o cortantes.  
6. Monte el anillo de montaje sobre el medio/woofer.  
7. Asegure el altavoz en la abertura con los tornillos. Tenga la precaución  
de no doblar el marco del altavoz en este proceso.  
8. Presione la rejilla en el anillo de montaje.  
Positivo  
de Mediorango  
+
Negativo  
cable Negro)  
Negativo  
de Mediorango  
Positivo  
de Agudo  
Positivo  
(cable Negro con  
raya Blanca)  
(Un canal del  
amplificador)  
Negativo  
Tweeter  
tweeter  
11 –  
VEUILLEZ LIRE LES INSTRUCITONS SUIVANTES POUR L'INSTALLA-  
TION DE CES PRODUITS.  
INTRODUCTION FRANÇAIS  
Ce manuel contient des informations sur les caractéristiques et l'installation  
des systèmes fanaticP. Nous vous proposons de garder ce manuel pour  
toute référence future.  
Nous vous recommandons vivement de faire installaer votre système  
punch fanaticP par un dealer agréé Rockford Fosgate. Si vous choisissez  
d'installer le système vous même, assurez-vous de lire ce manuel entière-  
ment avant de commencer.  
EMPLACEMENT DE MONTAGE  
Pour bénéficier d'une harmonie maximum  
entre le médium et l'aigu l'éloignement entre  
moins de 5cm  
ces deux haut-parleurs devrait être de moins  
de 5 cm entre les 2 chassis (Figure 1).  
Figure 1  
I
N
S
INSTALLATION  
Montage du haut-parleur médium  
T
A
L
L
A
T
I
O
N
+-  
12 –  
1. Découper un trou adapté au haut-parleur médium/woofer.  
Pour le 102mm, le diamètre du trou est de 90mm  
Pour le 133mm, le diamètre du trou est de 114mm  
Pour le 152mm, le diamètre du trou est de 129mm  
Pour le 165mm, le diamètre du trou est de 139mm  
2. Placer l'anneau de montage sur le trou et repérer l'emplacement des  
trous des vis.  
3. Retirer l'anneau. Percer les trous des vis en utilisant une mèche de 3mm.  
4. Faire passer les fils dans le médium/woofer.  
5. Connecter les fils au haut-parleur en respectant les polarités. Eloigner les  
fils de toute partie tranchante ou mobile du véhicule.  
6. Placer l'anneau de montage au-dessus du trou central.  
7. Placer le haut-parleur au-dussus du trou central. Visser le haut-parleur  
dans son emplacement. Faire attention à ne pas tordre le chassis du  
haut-parleur durant cette étape de montage.  
8. Mettre la grille dans l'anneau de montage.  
Positif  
du médium  
+
Négatif  
âble noire)  
Négatif  
du médium  
Positif  
de l aigu  
Positif  
(c ble noire  
rayé de blanc)  
al  
de l amplificateur)  
Négatif  
de l aigu  
tweeter  
13 –  
DIE FOLGENDE BEDIENUNGSANLEITUNG SOLL IHNEN BEIM EINBAU  
EINE HILFESTELLUNG GEBEN.  
ENLEITUNG DEUTSCH  
Diese Bedienungsanleitung enthält Informationen für den Gebrauch und  
Einbau des fanaticP Systems. Wir empfehlen, diese auch für Fragen in der  
Zukunft sorgfältig aufzubewahren.  
Es ist empfehlenswert, sich das fanaticP System von einem Autorisierten  
Rockford Fosgate Fachhändler einbauen zu lassen. Sollten Sie den Einbau  
jedoch selber vornehmen wollen, so empfehlen wir Ihnen, die  
Bedienungsanleitung sorgfälitg zu lesen.  
EINBAUORT  
Für das optimale Zusammenspiel von Mittel-  
Abstand max. 5cm  
und Hochtöner, sollte der Hochtöner  
niemals weiter als 5cm vorn Mitteltöner ent-  
fernt montiert werden (Abb. 1).  
Abb. 1  
I
N
S
T
A
L
L
A
T
I
O
N
EINBAU  
+-  
Montage des Mitteltöners  
14 –  
1. Schneiden Sie die richtige Lochgröbe für den Mitteltöner oder Midbab  
aus.  
Für den 102mm, schneiden Sie ein 90mm Ø Loch  
Für den 133mm, schneiden Sie ein 114mm Ø Loch  
Für den 152mm, schneiden Sie ein 129mm Ø Loch  
Für den 165mm, schneiden Sie ein 139mm Ø Loch  
2. Setzen Sie den Montagering auf das Loch und markieren Sie die Löcher  
für die Schrauben.  
3. Nehmen Sie den Ring wieder ab und bohren Sie dann, mit einem  
passenden Bohrer, die Schraubenlöcher vor.  
4. Führen Sie das Kabel durch das Loch.  
5. Schlieben Sie die Lautsprecherkabel an. Kontrollieren Sie, ob die  
Polarität stimmt. Stellen Sie sicher, dab das Lautsprecherkabel an keinen  
scharfen oder sich bewegenden Teilen anliegt.  
6. Plazieren sie den Montagering über dem mitteltöners.  
7. Plazieren Sie den Lautsprecher im Loch und befestigen Sie diesen. Seien  
Sie dabei sehr vorsichtig, so dab sich der Lautsprecherkorb nicht  
verzieht.  
8. Drücken Sie das Lautsprechergitter im Montagering fest.  
Mitteltöner  
Plus  
+
Minus  
(Schwarzes Kabel)  
Mitteltöner  
Minus  
Hochtöner  
Plus  
Plus  
(Schwarz/Weiβ  
gestreiftes Kabel)  
(Ein Kanal  
des Verstärkers)  
Hochtö er  
Minus  
tweeter  
15 –  
LEGGERE LE ISTRUZIONI SEGUENTI PRIMA DELL'INSTALLAZIONE DEL  
PRODOTTO.  
INTRODUZIONE ITALIANO  
Questo manuale fornisce informazioni sulle caratteristiche e sul instal-  
lazione dei sistemi fanaticP. Vi suggeriamo di conservare questo manuale  
come riferimento futuro.  
Raccomandiamo fortemente che is sistema sia installato dal vostro rivendi-  
tore Rockford Fosgate. Se scegliete di procedere con l'installazione da soli,  
leggete attentamente tutto il manuale prima di proseguire.  
POSIZIONAMENTO  
Per ottenere la miglior integrazione tra tweet-  
meno di 5 cm  
er e midrange, vi suggeriamo di posizionare  
i due componenti a meno di 5 cm tra loro  
(Figura 1).  
Figura 1  
I
N
S
T
A
L
L
A
T
I
O
N
INSTALLAZIONE  
+-  
Installazione del Midrange  
16 –  
1. Practicate un foro del diametro corretto per il midrange/woofer  
102mm per 90mm  
133mm per 114mm  
152mm per 129mm  
165mm per 139mm  
2. Posizionate l'anello della griglia sul foro e segnate la posizione delle viti.  
3. Togliete l'anello e forate il pannello con una puna da 3mm.  
4. Passate i cavi attraverso il foro.  
5. Collegate i cave assicurandovi di osservare la corretta polarità.  
Assicuratevi di mantenere i cavi lontano da parti in movimento o strut-  
ture taglienti.  
6. L'anello della griglia sopra il foro dell midrange.  
7. Posizionate l'altoparlante nel foro ed avvitatelo. Assicuratevi di non pie-  
gare il cestello dell'altoparlante.  
8. Incastrate la griglia sull'anello di fissaggio.  
Positivo  
Midrange  
+
Negativo  
Negativo  
Midrange  
Positivo  
Tweeter  
Positivo  
cavo nero/  
bianco)  
Negativo  
Tweeter  
dell’amplificatore)  
tweeter  
17 –  
Notes –  
18 –  
Notes –  
19 –  
Notes –  
20 –  
MADE IN USA  
This product is designed, developed and assembled in the USA by a  
dedicated group of American workers. The majority of the components  
used in the construction of this product are produced by American  
companies. However, due to the global nature of their manufacturing  
facilities and the loudspeaker parts industry in general, some parts may  
be manufactured in other countries.  
Rockford Corporation  
546 South Rockford Drive  
Tempe, Arizona 85281 U.S.A.  
In U.S.A., (480) 967-3565  
In Europe, Fax (49) 8503-934014  
In Japan, Fax (81) 559-79-1265  
2/01 B.M.  
LIT11112A  

Pioneer TAD M600 User Manual
Panasonic Lumix Mirrorless Camera DMC GF3XT User Manual
Panasonic Lumix DMC S2 User Manual
Panasonic DVD Palmcorder VDR M30PP User Manual
National Instruments FPT 1015 User Manual
Morphy Richards FP48952MEE User Manual
LaCie Slim Blu ray User Manual
Kenwood KDC 4070RV User Manual
Kenwood KDC 309A User Manual
JVC High Definition Camcorder GZ E200BUS User Manual