Radio Shack 999 User Manual

43-999.fm Page 1 Tuesday, August 17, 1999 8:28 AM  
Cat. No. 43-999  
OWNER’S MANUAL  
Please read before using this equipment.  
Caller ID System 999  
Big Button Caller ID Phone with Call Waiting  
43-999.fm Page 3 Tuesday, August 17, 1999 8:28 AM  
Pulse/Tone Option — lets you use your  
phone with pulse or tone service and  
lets you easily switch from pulse to tone  
dialing for long-distance, bank-by-  
phone, or other special services.  
Warning: To prevent fire or shock  
hazard, do not expose this product  
to rain or moisture.  
CAUTION  
Note: To protect the information stored  
in memory, your system requires four  
AA batteries (not supplied).  
RISK OF ELECTRIC SHOCK.  
!
DO NOT OPEN.  
CAUTION: TO REDUCE THE RISK OF  
ELECTRIC SHOCK, DO NOT REMOVE  
COVER OR BACK. NO USER-SERVICE-  
ABLE PARTS INSIDE. REFER SERVIC-  
ING TO QUALIFIED PERSONNEL.  
We recommend you record your sys-  
tem’s serial number here. The number is  
on the bottom of the system.  
Serial Number: __________________  
This symbol is intended to alert you to  
the presence of uninsulated danger-  
ous voltage within the product’s enclo-  
sure that might be of sufficient  
magnitude to constitute a risk of elec-  
tric shock. Do not open the product’s  
case.  
Your system is ETL listed to UL stan-  
dards and meets all applicable FCC  
standards.  
This symbol is intended to inform you  
that important operating and mainte-  
nance instructions are included in the  
literature accompanying this product.  
!
3
43-999.fm Page 4 Tuesday, August 17, 1999 8:28 AM  
READ THIS BEFORE  
INSTALLATION  
FCC STATEMENT  
Your telephone complies with Part 68 of  
FCC Rules. Upon request, you must  
provide the phone’s FCC registration  
number and REN to your telephone  
company. These numbers are shown on  
the bottom of the phone.  
We have designed your phone to con-  
form to federal regulations and you can  
connect it to most phone lines. Howev-  
er, each device that you connect to the  
telephone line draws power from the  
line. We refer to this power draw as the  
phone’s ringer equivalence number  
(REN). The REN is on the bottom of  
your phone.  
Note: You must not connect your tele-  
phone to:  
• coin-operated systems  
• party-line systems  
If you use more than one phone or other  
device on the line, add up all the RENs.  
If the total is more than five (three in ru-  
ral areas), your phones might not ring. If  
ringer operation is impaired, remove  
one of the devices from the line.  
• most electronic key phone systems  
The telephone complies with the limits  
for a Class B device as specified in Part  
15 of FCC Rules. These limits provide  
reasonable protection against radio and  
TV interference in a residential area.  
However, your telephone might cause  
TV or radio interference even when it is  
operating properly. To eliminate interfer-  
ence, you can try one or more of the fol-  
lowing corrective measures.  
• Reorient or relocate the TV’s receiv-  
ing antenna.  
• Increase the distance between the  
telephone and the radio or TV.  
Consult your local RadioShack store if  
the problem still exists.  
4
43-999.fm Page 5 Tuesday, August 17, 1999 8:28 AM  
CONTENTS  
Installation ........................................................................................................... 5  
Installing Batteries ........................................................................................... 5  
Mounting the Phone ........................................................................................ 6  
On a Desk ................................................................................................ 6  
On a Wall Plate ......................................................................................... 7  
On a Wall .................................................................................................. 8  
Connecting the Handset ........................................................................... 9  
Setting the Ringer ........................................................................................... 9  
Setting the Dialing Mode ............................................................................... 10  
Setting the Handset Volume ......................................................................... 10  
Setting the Display Contrast .......................................................................... 11  
Storing Your Area Code ................................................................................. 11  
Operation ........................................................................................................... 12  
Memory Dialing ............................................................................................. 12  
Storing a Number in the Emergency Memory ........................................ 12  
Storing a Number in Indirect Memory ..................................................... 12  
Dialing a Stored Number ........................................................................ 12  
Storing a Number in Voice Mail Memory ....................................................... 13  
Using FLASH ................................................................................................ 13  
Using REDIAL ............................................................................................... 13  
Using Tone Services on a Pulse Line ........................................................... 14  
Caller ID Operation ............................................................................................ 15  
Reviewing Caller ID Records ........................................................................ 15  
Dialing from a Caller ID Record .................................................................... 15  
Caller ID Messages ................................................................................ 16  
Store VIP Calls .............................................................................................. 17  
Deleting Caller ID RecordS ........................................................................... 17  
Troubleshooting ................................................................................................ 18  
Care and Maintenance ...................................................................................... 19  
The FCC Wants You to Know ....................................................................... 20  
Lightning ....................................................................................................... 20  
5
43-999.fm Page 6 Tuesday, August 17, 1999 8:28 AM  
INSTALLATION  
Follow this sequence to ensure your  
phone will work properly.  
Follow these steps to install batteries.  
1. If the desk top stand is connected,  
remove it by pressing the two tabs  
on the stand then lifting it off.  
• Install the batteries (see “Installing  
Backup Batteries”).  
• Reset the phone (see ).  
• Mount the phone (see ).  
Illustration showing phone stand re-  
moval  
If your phone does not work, disconnect  
it from the phone line, remove the bat-  
teries, then repeat the above sequence.  
2. Using a flat-bladed screwdriver,  
remove the battery compartment  
cover’s screw on the bottom of the  
system and remove the cover.  
INSTALLING BACKUP  
BATTERIES  
Illustration showing battery cover re-  
moval  
Your phone requires four AA batteries  
(not supplied) to protect its memory. We  
recommend you use Radio Shack alka-  
line batteries.  
3. Place four AA batteries in the bat-  
tery compartment as indicated by  
the polarity symbols (+ and –)  
marked inside.  
Cautions:  
• Use only fresh batteries of the  
required size and type.  
• Do not mix old and new batteries,  
different types of batteries (stan-  
dard, alkaline, or rechargeable), or  
rechargeable batteries of different  
capacities.  
Illustration showing inserting batteries  
4. Replace the cover and secure it with  
the screw.  
• Never leave dead or weak batteries  
in the phone.  
The telephone automatically tests the  
batteries each time it receives a call. If  
(batt icon) appears on the display or the  
display dims, replace the batteries.  
• Dispose of old batteries promptly;  
do not bury or burn them.  
6
43-999.fm Page 7 Tuesday, August 17, 1999 8:28 AM  
On a Desk  
MOUNTING THE PHONE  
2. Plug one end of the supplied long  
You can place the phone on a desk or  
table, mount it on a standard wall plate,  
or mount it directly on a wall.  
TEL. LINE  
modular cord into the  
jack  
on the back of the phone.  
Select a location that is:  
Illustration,  
connecting long line cord  
• near an AC outlet  
• near a modular phone line jack  
• out of the way of normal activities  
Notes:  
3. Plug the cord’s other end into a  
modular phone line jack.  
• Your telephone connects directly to  
a modular phone line jack. If your  
phone line jack is not modular, you  
can update it yourself, using jacks  
and adapters available from your lo-  
cal RadioShack store. Or, you can  
let the telephone company update it  
for you.  
4. Insert the tabs on the narrow end of  
the desk top stand into both upper  
slots. Then snap both of the bottom  
tabs of the stand into place.  
Illus. showing desk top stand  
• The USOC number of the jack to be  
installed is RJ11C for a baseboard,  
or RJ11W for a wall plate.  
Caution: The supplied AC adapter was  
designed specifically for your System  
999. Use only the supplied adapter.  
5. Insert the supplied AC adapter’s  
DC 9V  
barrel plug into the  
jack on  
the back of the phone.  
1. Remove the mounting bracket by  
pressing  
9V  
Illus. showing  
AC jack.  
7
43-999.fm Page 8 Tuesday, August 17, 1999 8:28 AM  
4. Plug the other end of the phone  
cord into the phone jack on the wall  
plate.  
On a Wall Plate  
Note: Check for the proper viewing an-  
gle of the liquid crystal display before  
mounting this system to a wall plate.  
5. Align the phone stand’s keyhole  
slots with the wall plate studs and  
slide the phone downward until it  
snaps into place.  
1. Plug one end of the supplied short  
modular phone cord into the TEL.  
LINE jack on the phone.  
Illustration,  
Illustration,  
mounting phone to wall plate  
connecting short line cord  
6. Slide out the handset holder, flip it  
over as shown, then slide it back  
into place.  
2. Route the cord through the strain-  
relief slot on the back of the phone.  
Illustration,  
routing cord through strain relief slot  
Illustration,  
flipping handset holder  
3. Insert the tabs on the narrow end of  
the stand into the matching slots  
near the top of the phone, making  
sure the cord is routed through the  
opening in the stand. Then snap the  
stand into place by pressing in the  
two tabs toward the bottom of the  
phone.  
Illustration,  
connecting phone stand  
8
43-999.fm Page 9 Tuesday, August 17, 1999 8:28 AM  
3. Route the cord through the strain-  
relief slot on the back of the phone.  
On a Wall  
To mount the System 999 directly on the  
wall, you need two screws (not supplied)  
with heads that fit into the keyhole slots  
on the bottom of the base.  
Illustration,  
routing cord through strain-relief slot  
Note: Check for the proper viewing an-  
gle of the liquid crystal display before  
mounting this system to a wall.  
4. Insert the tabs on the narrow end of  
the stand into the matching slots  
near the top of the phone, making  
sure the cord is routed through the  
opening in the stand. Snap the  
stand into place by pressing in the  
two tabs toward the bottom of the  
phone.  
1. Drill two holes, one above the other,  
31/4 inches apart. Thread a screw  
into each hole, letting the heads  
extend about 1/8 inch from the wall.  
1
"
/8  
Illustration,  
attaching phone stand  
1
"
3 /4  
5. Plug the other end of the modular  
phone cord into a modular phone  
jack.  
6. Align the phone stand’s keyhole  
slots with the screws and slide the  
phone down until it snaps into place.  
2. Plug one end of the supplied long  
modular phone cord into the TEL.  
LINE jack on the phone.  
Illustration,  
mounting phone on screws  
Illustration,  
connecting cord to phone  
7. Slide out the handset holder, flip it  
over as shown, then slide it back  
into place.  
Illustration,  
flipping handset holder  
9
43-999.fm Page 10 Tuesday, August 17, 1999 8:28 AM  
CONNECTING THE  
HANDSET  
SETTING THE RINGER  
If you do not want to hear the phone  
RINGER  
OFF  
. You can  
ring, set the  
to  
Plug one end of the supplied coiled cord  
into the modular jack on the side of the  
phone, and the other end into the modu-  
lar jack on the handset.  
still make calls with the ringer off, and  
you can answer calls if you hear another  
phone on the same phone line ring. If  
you want to hear the phone ring, set the  
RINGER  
ON  
.
to  
Illustration,  
connecting handset cord  
Illustration,  
RINGER  
Notes:  
• Your local RadioShack store sells a  
variety of longer coiled handset  
cords, which are especially useful  
when you mount the phone on the  
wall.  
To change the ringer’s frequency, set  
RINGER FREQ  
A
B
. to (highest pitch), , or  
C
(lowest pitch).  
• You can place the handset on the  
holder on top of the phone without  
disconnecting a call  
Illustration showing  
RINGER FREQ  
.
Illustration,  
top handset holder  
10  
43-999.fm Page 11 Tuesday, August 17, 1999 8:28 AM  
SETTING THE DIALING  
MODE  
SETTING THE HANDSET  
VOLUME  
TONE/PULSE  
HANDSET VOLUME  
HIGH,  
to  
Set  
(located on the back of  
Slide the  
MED LO  
.
the telephone) for the type of service  
you have. If you are not sure which type  
you have, do this simple test.  
or  
TONE/PULSE  
1. Be sure  
TONE  
is set to  
Illustration,  
.
HANDSET VOLUME  
.
Illustration,  
TONE/PULSE  
SETTING THE DISPLAY  
CONTRAST  
2. Lift the handset and listen for a dial  
tone.  
Note: If you wait more than 30 seconds  
between keypresses while setting the  
display contrast, the phone exits the set-  
up process without saving the new set-  
ting.  
3. Press any number except 0.  
Notes: If your phone system  
requires that you dial an access  
code (9, for example) before you  
dial an outside number, do not press  
the access code number either.  
1. Hold down  
and  
until  
ADJUST CONTRASTappears.  
If the dial tone stops, you have  
TONE/  
touch-tone service. Leave  
PULSE TONE  
Illustration,  
arrow buttons  
set to  
.
If the dial tone continues, you have  
TONE/PULSE  
pulse service. Set  
PULSE  
to  
.
2. Press  
or  
to change the dis-  
play contrast.  
11  
43-999.fm Page 12 Tuesday, August 17, 1999 8:28 AM  
STORING YOUR AREA  
CODE  
To quickly dial a number from a Caller  
ID record (see “Dialing from a Caller ID  
Record” on Page 16), you must store  
your local area code in the System  
999’s memory. Then, when you dial  
from a Caller ID record, the system  
skips the area code if it matches the one  
you stored.  
Follow these steps to store your area  
code.  
1. Leave the handset resting on the  
MEM  
base, press  
.
DIAL BACK  
2. Press  
code..appears.  
. Enter area  
Illustration,  
DIAL BACK  
3. Enter your three-digit area code.  
The phone beeps signaling that the  
area code is stored.  
To change an area code, store a new  
one in its place.  
12  
43-999.fm Page 13 Tuesday, August 17, 1999 8:28 AM  
OPERATION  
To make a call, pick up the handset.  
When you hear the dial tone, dial the  
number. The display shows the number  
you are dialing.  
• Should you store your own emer-  
gency numbers in the emergency  
memory buttons, when a power fail-  
ure occurs the emergency memory  
buttons return to the factory default  
setting. You must restore your  
emergency numbers.  
To answer a call, lift the handset and  
begin talking.  
With the handset on the base, press  
MEM.  
To end a call, return the handset to the  
base.  
Illustration,  
MEM  
MEMORY DIALING  
The System 999 lets you store three  
types of number for fast memory dialing.  
4. Enter an emergency phone number,  
up to __ digits, then press MEM  
again.  
• You can store up to three emer-  
gency numbers that you can dial by  
pressing one of three priority but-  
tons.  
5. Press either (cross icon), (fire icon)  
or (police icon) to store the number  
in that memory location. ”NUMBER  
STOREDappears.  
• You can store up to 13 indirect  
memory numbers that you can dial  
by pressing two buttons.  
• You can store a voice mail access  
code that you can dial by pressing a  
single button.  
Storing a Number in Indirect  
Memory  
Follow these steps to store a number in  
an indirect memory location.  
Storing a Number in the  
Emergency Memory  
1. With the handset on the base, press  
MEM.  
Follow these steps to store emergency  
phone numbers.  
2. Enter the phone number, up to __  
digits, then press MEM again.  
Notes:  
3. Press a number key (0–9) to store  
the phone number in that location.  
NUMBER STORED” appears.  
• The 3 emergency memory buttons  
are set with the factory default  
“911.”  
13  
43-999.fm Page 14 Tuesday, August 17, 1999 8:28 AM  
Dialing a Stored Number  
USING FLASH  
To dial a number stored in an emergen-  
cy memory location, press either emer-  
gency memory key.  
FLASH performs the electronic equiva-  
lent of a switchhook operation for spe-  
cial services, such as Call Waiting.  
To dial a number stored in the indirect  
memory location, press MEM and then  
the desired memory number (0–9).  
Illustration,  
FLASH  
STORING A NUMBER IN  
VOICE MAIL MEMORY  
For example, if you have Call Waiting,  
press FLASH to answer an incoming call  
without disconnecting the current call.  
Press FLASH again to return to the first  
call.  
If you subscribe to a message waiting  
service from your local telephone com-  
pany, the phone company will assign  
you an access number for retrieving  
your messages. The System 999 lets  
you store this access code and dial it  
with the touch of a button.  
Note: If you do not have any special  
phone services, pressing FLASH might  
disconnect the current call.  
Follow these steps to store your voice  
mail access code.  
USING REDIAL  
1. With the handset on the base, press  
You can quickly dial the last number di-  
aled. When you hear a dial tone, simply  
press REDIAL.  
MEM.  
2. Enter the access code, up to __ dig-  
its, then press MEM again.  
Illustration,  
REDIAL  
3. Press VOICE MAIL.  
Illustration,  
VOICE MAIL  
When your voice mail system prompts  
you for the access code, press VOICE  
MAIL.  
14  
43-999.fm Page 15 Tuesday, August 17, 1999 8:28 AM  
USING TONE SERVICES  
ON A PULSE LINE  
Some special services, such as bank by  
phone, require tone signals. If you have  
pulse service, you can still use these  
special tone services by following these  
steps.  
TONE/PULSE  
1. Be sure  
is set to  
PULSE.  
Illustration,  
TONE/PULSE  
2. Dial the service’s main number.  
3. When the service answers, press  
. Any additional numbers you dial  
are sent as tone signals.  
Illustration,  
*
4. The phone automatically resets to  
pulse dialing when you hang up.  
15  
43-999.fm Page 16 Tuesday, August 17, 1999 8:28 AM  
CALLER ID OPERATION  
If you subscribe to Caller ID service, the  
phone company sends information  
about the call, as well as the time and  
date, between the first and second rings  
of every call you receive.  
Notes:  
• If there is no call record in memory,  
the display shows, “NO CALLER  
ID”.  
• If you wait more than 30 seconds  
between keypresses while review-  
ing Caller ID records, the telephone  
automatically returns to the time dis-  
play.  
The System 999 displays this informa-  
tion when it receives a call, and it stores  
up to 50 Caller ID records for later re-  
view. It also shows if the name or num-  
ber were unavailable or blocked by the  
caller (see “Caller ID Messages” on  
Page 21).  
DIALING FROM A CALLER  
ID RECORD  
When a call comes in, ___ appears on  
the display, then the Caller ID record ap-  
pears.  
To dial a local number stored in a Caller  
ID record, recall the record, then lift the  
handset and press DIAL BACK.  
If the phone’s Caller ID memory be-  
comes full, any new call replaces the  
oldest call record.  
Illustration,  
DIAL BACK  
REVIEWING CALLER ID  
RECORDS  
When you have new Caller ID records  
(ones you have not reviewed), ___ ap-  
pears.To review Caller ID records, re-  
peatedly press  
records or  
to see the older  
to see the newer.  
Illustration,  
CID record example (?)  
16  
43-999.fm Page 17 Tuesday, August 17, 1999 8:28 AM  
Caller ID Messages  
Display  
Description  
Appears if you select to delete a caller ID record.  
Appears if you select to delete all caller ID records.  
ERASE  
ERASE ALL  
ERROR  
Appears if all caller ID information was garbled. Minor electri-  
cal disturbances can affect Caller ID information. Occasional  
errors are normal. If this happens often, contact your local  
telephone company and ask them to correct the problem,  
Appears when you reach the end of the information while  
reviewing stored information.  
END OF LIST  
Flashes if you subscribe to a message waiting service and a  
message is waiting.  
MESSAGE WAIT-  
ING  
Appears when you hang up call about 30 seconds after  
checking the message by the message waiting service.  
MSG WAITING  
OFF  
Appears if there is no Caller ID information stored in the sys-  
tem’s memory.  
NO CALLER ID  
OUT OF AREA  
PRIVATE  
Appears if the Caller is not within a Caller ID service area, or  
during the following types of incoming calls.  
Appears (if available) if the caller chose to block sending  
Caller ID information. No Caller information appears.  
Shows the number of a stored call.  
#
Flashes during a new incoming call, and appears at the first  
time you review a Call’s information. A new call is an incom-  
ing call where the caller’s number and name (if available) is  
not already stored in the system’s Caller ID memory.  
NEW  
Appears while you adjust the display’s contrast for the best  
readability.  
ADJUST CON-  
TRAST  
17  
43-999.fm Page 18 Tuesday, August 17, 1999 8:28 AM  
STORING VIP CALLS  
If you receive a call from an important caller (someone you call frequently, for exam-  
ple), the System 999 lets you store that caller’s call record as a VIP call. The System  
999 lets you know you have a VIP call by sounding an alert tone. You can also call  
back a VIP number with the touch of a button.  
The System 999 lets you store up to 10 call records as VIP calls, and review and de-  
lete the marks at any time.  
Follow these steps to store a VIP call:  
VIP  
1. To store a VIP number, recall the desired Caller ID record, then press  
.
Illustration,  
VIP  
VIP  
To call back a VIP number, press  
then lift the handset and press  
. Press or until you see the desired VIP number,  
DIAL  
.
DELETING CALLER ID RECORDS  
You can delete a single Caller ID record, or you can delete all records at once.  
ERASE  
To delete a single Caller ID record while it is on the display, press  
until  
ERASE CALL ID?” appears. The phone beeps twice.  
Illustration,  
ERASE  
To delete all Caller ID records, follow these steps.  
1. Press  
or  
to enter the records you want to delete.  
ERASE  
2. Hold down  
until “ERASE ALL?” appears.  
ERASE  
3. Press  
. The phone beeps twice.  
Note: The VIP call record will not be deleted when you delete all records.  
18  
43-999.fm Page 19 Tuesday, August 17, 1999 8:28 AM  
TROUBLESHOOTING  
We do not expect you to have any prob-  
lems with your telephone, but if you do,  
the following suggestions might help.  
Problem  
Suggestion  
No dial tone.  
Display is blank.  
appears.  
Check that the phone line and handset cords  
are securely connected.  
Batteries are weak or not installed and AC  
adapter is not connected.  
AC power is interrupted. Be sure AC adapter  
is correctly and securely connected.  
Volume drops or you hear  
unusual sounds.  
Someone has picked up another phone on  
the same line. Hang up the other phone.  
Call is noisy.  
Check that the phone line and handset cords  
are securely connected.  
Hang up and redial the number.  
Phone dials 1+area code+num- Store the local area code (see “Setting the  
ber when dialing a local number Area Codes” on Page 11).  
from a Caller ID record.  
Can receive calls, but cannot  
make calls.  
Set T/P correctly for the type of service you  
have (see “Setting the Dialing Mode” on  
Page 10).  
If you still have problems, disconnect  
the phone. If other phones on the same  
line work properly, the fault is in this  
phone or its installation. If you cannot  
find the problem, take your System 999  
to your local RadioShack store for assis-  
tance.  
19  
43-999.fm Page 20 Tuesday, August 17, 1999 8:28 AM  
CARE AND MAINTENANCE  
Your RadioShack Caller ID System 999 Telephone Big Button Caller ID is an example  
of superior design and craftsmanship. The following suggestions will help you care for  
your phone so you can enjoy it for years.  
Keep the phone dry. If it gets wet, wipe it dry immediately. Liquids might  
contain minerals that can corrode the electronic circuits.  
Use and store the phone only in normal temperature environments.  
Temperature extremes can shorten the life of electronic devices and  
distort or melt plastic parts.  
Keep the phone away from dust and dirt, which can cause premature  
wear of parts.  
Handle the phone gently and carefully. Dropping it can damage circuit  
boards and cases and can cause the phone to work improperly.  
Use only fresh batteries of the required size and type. Old batteries can  
leak chemicals that damage your phone’s electronic parts.  
Wipe the phone with a damp cloth occasionally to keep it looking new.  
CLEANER  
Do not use harsh chemicals, cleaning solvents, or strong detergents to  
clean the phone.  
Modifying or tampering with the phone’s internal components can cause a malfunction  
and might invalidate your phone’s warranty and void your FCC authorization to oper-  
ate it. If your phone is not performing as it should, take it to your local RadioShack store  
for assistance. If the trouble is affecting the phone lines, the phone company might ask  
you to disconnect your phone until you solve the problem.  
20  
43-999.fm Page 21 Tuesday, August 17, 1999 8:28 AM  
THE FCC WANTS YOU TO  
KNOW  
LIGHTNING  
Your telephone has built-in protection  
circuits to reduce the risk of damage  
from surges in telephone line current.  
These protection circuits meet or ex-  
ceed the FCC requirements. However,  
lightning striking the telephone lines can  
damage your telephone.  
In the unlikely event that your telephone  
causes problems on the telephone line,  
the telephone company can disconnect  
your service. The telephone company  
normally attempts to notify you in ad-  
vance. If advance notice is not practical,  
the telephone company notifies you as  
soon as possible and advises you of  
your right to file a complaint with the  
FCC.  
Lightning damage is not common. Nev-  
ertheless, if you live in an area that has  
severe electrical storms, we suggest  
that you unplug your telephone during  
storms to reduce the possibility of dam-  
age.  
Also, the telephone company can make  
changes to its lines, equipment, opera-  
tions, or procedures that could affect the  
operation of this telephone. The tele-  
phone company notifies you of these  
changes in advance so you can take the  
necessary steps to prevent interruption  
of your telephone service.  
21  
43-999.fm Page 22 Tuesday, August 17, 1999 8:28 AM  
RadioShack  
A Division of Tandy Corporation  
Fort Worth, Texas 76102  
11A8  
Printed in China  
43-999.fm Page 23 Tuesday, August 17, 1999 8:28 AM  
RadioShack  
A Division of Tandy Corporation  
Fort Worth, Texas 76102  
11A8  
Printed in China  
43-999.fm Page 24 Tuesday, August 17, 1999 8:28 AM  
Limited One-Year Warranty  
This product is warranted by RadioShack against manufacturing defects in material and workman-  
ship under normal use for one (1) year from the date of purchase from RadioShack company-owned  
stores and authorized RadioShack franchisees and dealers. EXCEPT AS PROVIDED HEREIN, Ra-  
dioShack MAKES NO EXPRESS WARRANTIES AND ANY IMPLIED WARRANTIES, INCLUDING  
THOSE OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED  
IN DURATION TO THE DURATION OF THE WRITTEN LIMITED WARRANTIES CONTAINED  
HEREIN. EXCEPT AS PROVIDED HEREIN, RadioShack SHALL HAVE NO LIABILITY OR RE-  
SPONSIBILITY TO CUSTOMER OR ANY OTHER PERSON OR ENTITY WITH RESPECT TO ANY  
LIABILITY, LOSS OR DAMAGE CAUSED DIRECTLY OR INDIRECTLY BY USE OR PERFOR-  
MANCE OF THE PRODUCT OR ARISING OUT OF ANY BREACH OF THIS WARRANTY, IN-  
CLUDING, BUT NOT LIMITED TO, ANY DAMAGES RESULTING FROM INCONVENIENCE, LOSS  
OF TIME, DATA, PROPERTY, REVENUE, OR PROFIT OR ANY INDIRECT, SPECIAL, INCIDEN-  
TAL, OR CONSEQUENTIAL DAMAGES, EVEN IF RadioShack HAS BEEN ADVISED OF THE  
POSSIBILITY OF SUCH DAMAGES.  
Some states do not allow the limitations on how long an implied warranty lasts or the exclusion of in-  
cidental or consequential damages, so the above limitations or exclusions may not apply to you.  
In the event of a product defect during the warranty period, take the product and the RadioShack  
sales receipt as proof of purchase date to any RadioShack store. RadioShack will, at its option, un-  
less otherwise provided by law: (a) correct the defect by product repair without charge for parts and  
labor; (b) replace the product with one of the same or similar design; or (c) refund the purchase  
price. All replaced parts and products, and products on which a refund is made, become the prop-  
erty of RadioShack. New or reconditioned parts and products may be used in the performance of  
warranty service. Repaired or replaced parts and products are warranted for the remainder of the  
original warranty period. You will be charged for repair or replacement of the product made after the  
expiration of the warranty period.  
This warranty does not cover: (a) damage or failure caused by or attributable to acts of God, abuse,  
accident, misuse, improper or abnormal usage, failure to follow instructions, improper installation or  
maintenance, alteration, lightning or other incidence of excess voltage or current; (b) any repairs  
other than those provided by a RadioShack Authorized Service Facility; (c) consumables such as  
fuses or batteries; (d) cosmetic damage; (e) transportation, shipping or insurance costs; or (f) costs  
of product removal, installation, set-up service adjustment or reinstallation.  
This warranty gives you specific legal rights, and you may also have other rights which vary from  
state to state.  
RadioShack Customer Relations, Dept. W, 100 Throckmorton St., Suite 600, Fort Worth, TX 76102  
We Service What We Sell  
3/97  
RadioShack  
A Division of Tandy Corporation  
Fort Worth, Texas 76102  
11A8  
Printed in China  

RocketFish RF MAB2 User Manual
Pioneer Car Video System X EM21V User Manual
Philips Car Video System 244EI User Manual
Pentair Intellitouch ScreenLogic User Manual
Olympus PT 019 User Manual
Nikon COOLPIXS9100BLK User Manual
Motorola MOTOPURE H12 User Manual
Lanzar Car Audio Lanzar Vibe VIBE411 User Manual
Kenwood KRC 479R User Manual
JVC KW AVX830 User Manual