RCA DRC69702 User Manual

User manual  
DRC69702  
It is important to read this instruction book prior to using your new product for the first time.  
RCA DRC69702 IB.indd  
3
11/25/2008 2:28:49 PM  
Notes on Copyright  
It is forbidden by law to copy, broadcast, show, broadcast on cable, play in public, or rent copyrighted  
material without permission.  
Apparatus Claims of U.S. Patent Nos. 6,836,549; 6,381,747; 7,050,698; 6,516,132; and 5,583,936 licensed for  
limited viewing uses only.  
This product incorporates copyright protection technology that is protected by U.S. patents and other  
intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision,  
and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision.  
Reverse engineering or disassembly is prohibited.  
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR  
MOISTURE. DO NOT PLACE OBJECTS FILLED WITH LIQUIDS ON OR NEAR THIS UNIT.  
SHOULD ANY TROUBLE OCCUR, DISCONNECT THE AC POWER ADAPTER AND REFER  
SERVICING TO A QUALIFIED TECHNICIAN.  
TO BE COMPLETELY DISCONNECTED FROM THE POWER INPUT, THE UNIT'S AC  
ADAPTER SHOULD BE DISCONNECTED FROM THE WALL OUTLET. THE AC ADAPTER  
SHOULD NOT BE OBSTRUCTED AND SHOULD BE EASILY ACCESSIBLE DURING  
INTENDED USED.  
Important Safety Instructions  
1. Read these instructions.  
2. Keep these instructions.  
3. Heed all warnings.  
4. Follow all instructions.  
5. Do not use this apparatus near water.  
6. Clean only with a dry cloth.  
7. Do not block any of the ventilation openings. Install in accordance with the manufacturer’s  
instructions.  
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including  
amplifiers) that produce heat.  
9. Do not defeat the safety purpose of the polarized or grounding - type plug. A polarized plug has two  
blades with one wider than the other. A grounding type plug has two blades and a third grounding  
prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit  
into your wall outlet, consult an electrician for replacement of the obsolete outlet.  
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles,  
and the point where they exit from the apparatus.  
11. Only use attachments/accessories specified by the manufacturer.  
12. Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer,  
or sold with the apparatus. When a cart is used, use caution when moving the cart/  
apparatus combination to avoid injury from tip-over.  
13. Unplug this apparatus during lightning storms or when unused for long periods of  
time.  
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been  
damaged in any way, such as the power-supply cord or plug is damaged, liquid has spilled or objects  
have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate  
normally, or has been dropped.  
RCA DRC69702 IB.indd  
5
11/25/2008 2:28:50 PM  
Table of Contents  
Disc Formats......................................1 Locating a Desired Section ............14  
Locating a Specific Title ...........................14  
Accessories .......................................2  
Locating a Specific Chapter.....................14  
Remote Control ...............................2  
Locating a Specific Time ..........................14  
Control Reference Guide ............. 3-4  
DVD Programmable Memory ........14  
Remote Control..........................................3  
Playing Titles/Chapters in a Favorite  
DVD Player..................................................4  
Order.........................................................14  
Monitor.......................................................4  
Repeat Playback .............................15  
Power Supply................................... 5  
Repeating a Chapter/Title....................... 15  
Using the Car Power Adapter ...................5  
Repeating a Single Track/Whole Disc..... 15  
Connections...................................6-8  
Repeating a Specific Section .................. 15  
Watching a DVD on the DVD Player and  
the Monitor................................................6  
Viewing JPG Files............................16  
Play Modes for CD or JPG Disc.......17  
Connecting a TV.........................................6  
Connecting a Stereo Receiver or Amplifier  
(DVD Player only).......................................7  
Customizing the Functions  
Settings ......................................18-20  
Language Setup .......................................18  
Video Setup..............................................19  
Misc Setup ................................................20  
Connecting Game Systems/Video  
Equipment (monitor only).........................7  
Using the Monitor with Other Equipment  
while Playing DVD on the DVD Player......8  
Using Headphones/Earphones ..................8  
Maintenance...................................20  
Cleaning the Disc .....................................20  
Cleaning the Unit.....................................20  
Important Note .......................................20  
Mounting in the Vehicle..................9  
Installation guide.......................................9  
Using the Stand for Desktop Use ..10  
Sound System .................................10  
Unit Operation ..............................10  
Troubleshooting Guide..................21  
Limited Warranty ...........................22  
Playing a Disc.............................11-13  
Playing a Disc............................................11  
Pausing Playback (Still Mode) .................11  
Stopping Playback....................................11  
Fast Forward / Fast Reverse .....................11  
Skip (Forward / Reverse) ..........................11  
Audio Selection.......................................11  
Subtitle Selection .....................................12  
Angle Selection ........................................12  
Display Function.......................................13  
Adjust the LCD Screen .............................13  
RCA DRC69702 IB.indd  
6
11/25/2008 2:28:51 PM  
Disc Formats  
This DVD player can playback discs bearing any of the following marks:  
DVDs  
Audio CDs  
[8cm(3")/12cm(5") disc]  
[8cm(3")12cm(5") disc]  
Compatible  
Region Management Information  
Region Management Information: This unit is designed and manufactured to respond to the Region  
Management Information that is encoded on DVDs. If the region number printed on the DVD does not  
correspond to the region number of this unit, this unit cannot play that disc.  
The region number of this unit is 1.  
Disc Function or Operation that is Not Available  
When the  
symbol appears on the TV screen, it indicates that the function or operation attempted is not  
available at that time. This occurs because the DVD manufacturer determines the specific functions. Certain  
functions may not be available on some discs. Be sure to read the documentation provided with the disc.  
Icons Used on DVDs  
Sample lcons  
Language selections for audio  
Language selections for subtitles  
Screen aspect ratio  
Multiple camera angles  
Region code indicator  
Note:  
When playing back a CD-G (Graphics) or CD EXTRA disc, the audio portion will be played, but the graphic  
images will not be shown.  
Titles, Chapters and Tracks  
DVDs are divided into “titles” and “chapters”. If  
the disc has more than one movie on it, each movie  
would be a separate “title”. “Chapters” are sections  
of titles.  
Audio CDs are divided into “tracks”. A “track” is  
usually one song on an Audio CD.  
Note:  
Numbers identify each title, chapter, and track on a disc. Most discs have these numbers recorded on  
them, but some do not.  
Notes on Unauthorized Discs  
You may not be able to play back some DVDs on this unit if they were purchased from outside your  
geographic area or made for business purposes.  
1
RCA DRC69702 IB.indd  
1
11/25/2008 2:28:52 PM  
Accessories  
Please check and identify the supplied accessories.  
Remote Control (with battery)...............................................................................................................x 1  
Car Power Adapter..................................................................................................................................x 1  
DC-AV Cable ............................................................................................................................................x 1  
Mounting Strap.......................................................................................................................................x 2  
Remote Control  
Using the Remote Control  
Take out the plastic sheet before operating the  
Remote Control.  
Point the remote control at the REMOTE SENSOR  
located on the unit.  
When there is a strong ambient light source, the  
performance of the infrared REMOTE SENSOR  
may be degraded, causing unreliable operation.  
To Change Remote Battery  
2. Insert one CR2025 (3V) size battery.  
1. Open the battery door.  
Battery Replacement  
When the battery becomes weak, the operating distance of the remote control will be greatly reduced and  
you will need to replace the battery.  
Note:  
If the remote control is not going to be used for a long time, remove the battery to avoid damage caused  
by battery leakage corrosion.  
When discarding batteries, environmental problems must be considered and local rules or laws governing  
the disposal of these batteries must be strictly followed.  
WARNING:  
• Do not dispose of battery in fire; battery may explode or leak.  
• Batteries should not be exposed to excessive heat such as sunshine, fire or the like.  
CAUTION:  
Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.  
2
RCA DRC69702 IB.indd  
2
11/25/2008 2:28:52 PM  
Control Reference Guide  
Remote Control  
1) VIDEO MODE Button  
9) MENU Button  
Adjusts Brightness, Contrast, Color or View  
Mode of the LCD screen.  
Enters and exits the main DVD menu.  
10)  
NEXT Button  
2)  
3)  
PREV Button  
Moves back through titles, chapters or tracks on  
a disc.  
Moves forward through titles, chapters or tracks  
on a disc.  
11) STOP Button  
/
SEARCH Buttons  
Stops playing a disc.  
SEARCH: Fast reverse playback.  
SEARCH: Fast forward playback.  
4) GOTO Button  
PLAY Button  
Starts or resumes playback of a disc.  
PAUSE Button  
Skips directly to a location on a DVD.  
Pauses playback and frame advance.  
12) DISPLAY Button  
5) Cursor (  
,
,
,
) Buttons  
Moves between selections on a menu screen  
and adjusts certain settings.  
ENTER Button  
Shows status information on the screen.  
13) ANGLE Button  
Switches between multiple camera angles when  
the DVD you are playing has been programmed  
with multiple camera angles.  
14) AUDIO Button  
Selects one of the audio sound tracks on a DVD  
(if more than one is available) or select the  
audio output mode on a CD.  
15) SUBTITLE Button  
Confirms selections on a menu screen.  
6) MEMORY Button  
In STOP mode, sets titles/chapters in a favorite  
order.  
7) Number (0 - 9) Buttons  
Use when creating programs or locating a title/  
chapter/track or specific time.  
8) REPEAT A-B Button  
Selects one of the subtitle languages  
programmed on a DVD (if available).  
RETURN Button  
Performs point-to-point repeat playback on a  
DVD or CD.  
REPEAT DISC Button  
Returns to normal operation after using the  
SETUP menu of a DVD.  
Repeats a DVD chapter or title.  
Repeats a CD track or the entire disc.  
SETUP Button  
In stop mode, it brings up the unit’s SETUP  
menu.  
3
RCA DRC69702 IB.indd  
3
11/25/2008 2:28:53 PM  
Control Reference Guide  
DVD Player  
1) Remote Sensor  
1
2
3
4
5
6
Receives the remote control signal.  
2)  
3)  
OPEN Button  
Press the OPEN button and hold the  
front panel to open the disc door.  
SEARCH Button  
Performs fast reverse playback.  
SEARCH Button  
7
Performs fast forward playback.  
PREV Button  
Goes backwards to previous chapters/  
tracks.  
8
9
NEXT Button  
Advances chapters/tracks.  
STOP Button  
Stops playing a disc.  
PAUSE Button  
Pauses playback and frame advance.  
PLAY Button  
10  
11  
8) AUDIO / VIDEO OUT Jacks  
9) DC IN 9V-12V Jack  
10) POWER ON Indicator  
Starts or resumes playback of a disc.  
4) STANDBY(power off) / ON Switch  
5) LCD Screen  
6) Headphone Jack  
7) VOLUME Control  
Adjusts the volume.  
When the STANDBY / ON switch is in the ON  
position, the light will illuminate.  
11) Stand  
Monitor  
5
6
7
2
3
4
1) DC OUT 9-12V Jack  
2) VOLUME Control  
Adjusts the volume.  
3) Headphone Jack  
4) AUDIO / VIDEO IN Jacks  
5) LCD Screen  
6) BRIGHTNESS Control  
Adjusts the relative lightness or  
darkness of the screen.  
7) COLOR Control  
Adjusts the color intensity.  
8) Screen Switch  
WIDE: Wide Screen  
NORMAL: Pan Screen  
9) ON / OFF Switch  
10) DC IN 9-12V Jack  
11) POWER ON Indicator  
8
9
10  
11  
12  
1
When the ON / OFF switch is in the ON position,  
the light will illuminate.  
12) Stand  
4
RCA DRC69702 IB.indd  
4
11/25/2008 2:28:54 PM  
Power Supply  
A. Using the Car Power Adapter  
The included 12V car power adapter is designed for use with vehicles that have a 12V, negative ground  
electrical system.  
IMPORTANT  
This car adapter is for use with  
Using the DVD Player and the Monitor Together  
12 volt batteries only.  
DVD player  
right side  
Monitor -  
left side right side  
To 12V  
power outlet  
4
AV-DC cable  
(included)  
Car Power  
Adapter  
To DC IN 9V-12V  
jack  
3
To A/V OUT &  
DC IN 9V-12V  
jacks  
1
To A/V IN &  
DC OUT 9V-12V  
jacks  
2
WARNING:  
Disconnect this car power adapter when  
not in use. Not for use in 24V vehicles.  
Using the DVD Player or the Monitor Separately  
DVD player  
right side  
Monitor  
right side  
Car Power Adapter  
Car Power Adapter  
2
2
To 12V power outlet  
To 12V power outlet  
To DC IN 9V-12V  
1
To DC IN 9V-12V  
1
jack  
jack  
Cautions:  
• Use this unit only with the included 12V car power adapter. Use with other car adapters could  
damage the unit, or even your vehicle.  
• The included 12V car power adapter is for use with this unit only. Do not use it with any other  
equipment.  
In the interest of traffic safety, drivers should not operate the unit or view videos while driving.  
When the inside of the 12V power outlet is dirty with ashes or dust, the plug section may become hot  
due to poor contact. Be sure to clean the 12V power outlet before use.  
After use, disconnect the 12V car power adapter from both the unit and 12V power outlet.  
If the unit is not properly attached to a vehicle, it may become airborne in the event of an accident and  
cause damage, injury, or death.  
Check your local traffic laws for rules governing the use of video devices in vehicles.  
5
RCA DRC69702 IB.indd  
5
11/25/2008 2:28:55 PM  
Connections  
A. Watching a DVD on the DVD Player and the Monitor  
You can watch the same DVD on the DVD player and the monitor.  
DVD player  
right side  
Monitor -  
left side right side  
AV-DC cable  
(included)  
To A/V OUT &  
DC IN 9V-12V  
jacks  
To A/V IN &  
DC OUT 9V-12V  
jacks  
Watching a DVD on the DVD Player and the Monitor  
1. Connect the DVD player and the monitor using the included DC-AV Cable.  
2. Turn on the DVD player and the monitor.  
3. Play a DVD on the DVD player; the monitor will play the same DVD at the same time.  
B. Connecting a TV (for the DVD Player Only)  
If your TV has Audio/Video inputs, you can connect the DVD player to your TV using a standard A/V cable  
(not included).  
DVD player  
right side  
AV cable  
(not included)  
TV  
To A/V OUT jacks  
Watching a DVD on your TV  
1. Connect your TV to the DVD player using a standard AV Cable (not included).  
2. Turn on the TV and follow the instructions included with it to play the DVD.  
Note:  
6
Make sure to use the correct Audio/Video cable. Connecting the plugs incorrectly may cause a weak  
signal.  
If your TV does not have Audio/Video inputs, you will need to purchase an RF modulator (sold separately)  
and follow the instructions included with it to connect the unit to your TV.  
RCA DRC69702 IB.indd  
6
11/25/2008 2:28:56 PM  
Connections  
C. Connecting a Stereo Receiver or Amplifier (for the DVD Player Only)  
The DVD player can play two channels Dolby Digital.  
DVD player  
right side  
Listening on External Audio  
Equipment  
1. Connect the DVD player to the left/right  
Audio In jacks on the other equipment  
using  
a
standard Audio cable (not  
Audio cable  
(not included)  
included).  
Stereo Receiver /  
Amplifier  
2. Turn on your audio equipment and  
follow the instructions provided with it  
to select the AUDIO IN function.  
To Audio OUT jacks  
Note:  
Make sure to use the correct Audio cable. Connecting the plugs incorrectly may cause a weak signal.  
If you have a stereo VCR, make sure you set it to stereo mode.  
Due to copyright protection, DVD movies cannot be copied. If you copy a DVD movie onto a videotape, the  
resulting copy will be unclear, with poor sound quality. This is NOT caused by a defective DVD system.  
D. Connecting Game Systems/Video Equipment (for the Monitor Only)  
You can connect game systems or other video equipment for playback using the monitor.  
Watching video equipment  
1. Connect the other equipment to the monitor using a standard AV Cable (not included).  
2. Turn on the monitor.  
3. Turn on the video equipment and follow the instructions provided with it to playback.  
Note:  
Make sure to use the correct Audio/Video cable. Connecting the plugs incorrectly may cause a weak  
signal.  
If you have a mono VCR, the volume level from the speakers will be low.  
Monitor -  
left side right side  
Game System /  
Video Equipment  
AV cable  
(not included)  
To A/V IN jacks  
7
RCA DRC69702 IB.indd  
7
11/25/2008 2:28:56 PM  
Connections  
E. Using the Monitor with Other Equipment while Playing DVD on the DVD Player  
You can use a game console or other video equipment on the monitor while viewing a DVD on the DVD  
player.  
Game System /  
Video Equipment  
Monitor -  
left side right side  
DVD player  
right side  
AV cable  
(not included)  
Connect to  
Car Power Adapter  
To A/V OUT &  
DC IN 9V-12V jacks  
To A/V IN &  
DC OUT 9V-12V  
jacks  
AV-DC cable  
(included)  
Watching Video Equipment on the Monitor while Viewing a DVD on the DVD Player  
1. Connect the power connector between the DVD player and the monitor. Do not connect the Audio/Video  
portion of the DC-AV cable.  
2. Connect the monitor to the other equipment using a standard AV cable (not included).  
3. Turn on the DVD player, the monitor and the other equipment.  
4. Play a DVD on the DVD player.  
6. Use the monitor for the other equipment.  
Note:  
Make sure to use the correct Audio/Video cable. Connecting the plugs incorrectly may cause a weak  
signal.  
If you have a mono VCR, the volume level from the speakers will be low.  
Headphones / Earphones  
[1/8(3.5mm) diameter plug]  
F. Using Headphones/Earphones  
Turn down the volume before connecting the headphones/  
earphones. Slowly raise the volume with the headphones  
on until you reach your desired volume. When headphones  
are connected, the speaker is automatically disabled.  
Warning:  
Excessive sound pressure from earphones and  
headphones can cause hearing loss. Avoid  
listening to sound at excessive levels which  
could be harmful to your ears.  
DVD player  
right side  
Monitor  
left side  
8
RCA DRC69702 IB.indd  
8
11/25/2008 2:28:57 PM  
Mounting in the Vehicle  
Mounting in the Vehicle  
Use the supplied mounting straps to install the DVD player and monitor on the back of the vehicle's headrests.  
Tightly wrap the mounting strap around the headrest.  
Mounting the DVD Player  
Mounting the Monitor  
SAFETY WARNING!  
This unit should never be used by the vehicle's driver or left unsecured in the vehicle while driving.  
If this unit is being used in your vehicle, be sure that it is secured or held safely, and does not obstruct any  
safety device, including air bags or seat belts.  
All passengers should wear seat belts when using this unit in a moving vehicle.  
If in doubt, please contact your vehicle manufacturer for further advice.  
Installation Guide  
9
RCA DRC69702 IB.indd  
9
11/25/2008 2:28:58 PM  
Using the Stand for Desktop Use  
You can stand the DVD Player and monitor up on a desk or table using the stand on the back.  
Sound System  
Dolby Digital  
Dolby Digital is a technology developed by Dolby Laboratories. Soundtracks encoded in Dolby Digital can  
reproduce from one to 5.1 discrete channels of excellent quality audio.  
The unit automatically recognizes the Dolby Digital bitstream and provides a downmix suitable for two-  
channel listening. An additional Dolby Digital decoder is required for reproduction of the discrete multi-  
channel soundtracks available on many DVDs.  
Manufactured under license from Dolby Laboratories.  
'Dolby' and the double-D symbol are trademarks of Dolby Laboratories.  
Unit Operation  
Turning on the Unit  
1. Slide the STANDBY / ON switch on the DVD player to the ON position. Slide the ON / OFF switch on the  
monitor to the ON position.  
2. The start-up picture will appear on the screens.  
3. After use, slide the STANDBY / ON switch on the DVD player to STANDBY (power off). Slide the ON / OFF  
switch on the monitor to the OFF position.  
10  
RCA DRC69702 IB.indd 10  
11/25/2008 2:28:58 PM  
Playing a Disc  
This owner’s manual explains the basic instructions  
for operating this unit. Some DVDs are produced  
accompanying the specific DVD in question for  
more information about the options available on  
that DVD.  
in  
a
manner that allows specific or limited  
operation during playback. Therefore, this unit  
may not respond to all operating commands. THIS  
IS NOT A DEFECT. Please refer to the instructions  
A “  
” may appear on the screen during operation.  
” means that the desired operation is not  
permitted by the unit or disc.  
Playing a Disc  
1. Slide the STANDBY / ON switch to the ON position. Slide the ON / OFF switch on the monitor to the ON  
position. See CUSTOMIZING THE FUNCTION SETTINGS before proceeding to step 2.  
2. Press the  
OPEN button and hold the front panel to open the disc door.  
3. Hold the disc by its sides and gently push it onto the spindle, with label side facing toward you, until you  
hear a “click”.  
4. Gently push the disc door closed. It takes a short while for your unit to load the disc. After loading, for  
most DVDs, the unit will automatically take you to the main menu or start playing. If the unit does not  
automatically start playing the DVD, press the  
PLAY button.  
Pausing Playback (Still Mode)  
Press the PAUSE button. To resume normal playback, press the  
PLAY button.  
Each time you press the PAUSE button, the picture advances one frame.  
Stopping Playback  
Press the STOP button at the location where you want to interrupt playback. To resume playback at the  
position where the disc was stopped, press the  
PLAY button.  
If you press the STOP button twice, the unit’s memory will be cleared and pressing the  
reset the disc to the beginning.  
PLAY button will  
Fast Forward / Fast Reverse  
1. Press the SEARCH  
or  
SEARCH button when a disc is playing. Each time you press the SEARCH  
or  
SEARCH button, the playback speed changes in the following sequence:  
2. Press the  
Note:  
PLAY button when you reach the desired point to resume normal playback.  
The DVD player mutes sound and subtitles during reverse and forward scan of DVDs.  
The fast playback speed may differ depending on the disc.  
Skip (Forward / Reverse)  
Press the  
Press the  
PREV button to go back to current or previous chapters/tracks/titles.  
NEXT button to advance chapters/tracks/titles.  
For audio CDs, use the number buttons on the remote control to jump immediately to the desired track  
number.  
11  
RCA DRC69702 IB.indd 11  
11/25/2008 2:28:59 PM  
Audio Selection  
On some DVDs, the sound is recorded in two or more formats. Follow the directions below to select the  
preferred language and sound system.  
1. While a disc is playing, press the AUDIO button to show the current audio format number.  
2. Press the AUDIO button repeatedly to select the desired audio format.  
Note:  
If only one audio format is recorded on the DVD, the number does not change.  
Some DVDs allow you to change audio selections using the disc menu only. If this is the case, press the  
MENU button and choose the appropriate language on the disc menu.  
You can select different audio channels (Stereo, Left or Right) on an Audio CD by pressing the AUDIO  
button repeatedly.  
Subtitle Selection  
1. While a DVD is playing, press the SUBTITLE button to display the current language setting, as shown in the  
example.  
2. Press the SUBTITLE button repeatedly to select the desired subtitle language. You can turn subtitles off by  
pressing the SUBTITLE button repeatedly until the “  
Note:  
” is displayed.  
Some DVDs are set to display subtitles automatically, and you cannot turn them off even if you set the  
subtitle function to off.  
During some scenes, the subtitles may not appear immediately after you select your desired scene.  
The number of subtitle languages recorded differs depending on the disc. If only one language is recorded,  
the language does not change.  
This function can only be used for discs on which subtitles have been recorded in multiple languages.  
Some DVDs allow you to change subtitles using the disc menu only. If this is the case, press the MENU  
button and choose the appropriate subtitle on the disc menu.  
Angle Selection  
Some DVDs contain scenes which have been shot from a number of different angles. For these discs, the same  
scene can be viewed from each of these different angles.  
1. While you are playing  
a
DVD with different angles  
recorded, press the ANGLE button to view the number of  
current angles available.  
2. Press the ANGLE button repeatedly to change the scene to  
the next recorded angle.  
After approximately two seconds, playback will continue  
from the new angle you selected.  
If no button is pressed within 10 seconds, playback  
continues without changing the current angle.  
Note:  
This function can only be used for discs on which scenes shot from multiple angles have been recorded.  
If only one angle is recorded, “ ” is displayed.  
Display Function  
While the disc is playing, press the DISPLAY button repeatedly to display  
information on operation status.  
Elapsed Time:  
Elapsed time from the beginning of the title which is  
currently playing.  
Remain Time:  
12  
Remaining time of the title which is currently playing.  
RCA DRC69702 IB.indd 12  
11/25/2008 2:29:00 PM  
Adjust the LCD Screen  
You can adjust Brightness, Contrast, Color or View Mode of the LCD screen.  
1. Press the VIDEO MODE button.  
2. Press the  
3. Press the  
setting).  
/
/
button to select Brightness, Contrast, Color or View Mode.  
button to change the setting. (For View Mode, press the ENTER button to change the  
4. Press the VIDEO MODE button to exit the menu.  
Note:  
For the monitor, you can adjust the LCD screen by the BRIGHTNESS control, COLOR control and Screen (WIDE  
/ NORMAL) switch on the monitor.  
Locating a Desired Section  
Locating a Specific Title  
If a DVD contains title numbers, you can locate a specific title by directly selecting its title number.  
1. Press the GOTO button.  
2. Press the corresponding number button(s) for the title you want.  
3. Press the ENTER button to confirm. Playback starts from the selected section.  
Note:  
If the title numbers you entered is not permitted by the DVD, after you press the ENTER button, it will  
restore to - - -. You should re-enter correct numbers.  
Some discs may not respond to this process.  
This method of locating a title is available only on a DVD that contains title numbers.  
Locating a Specific Chapter  
If you know the chapter number for the chapter that you want to play, you can locate it by directly selecting  
that number.  
1. Press the GOTO button.  
2. Press the or button to display Chapter and press the corresponding number button(s) for the chapter  
you want.  
3. Press the ENTER button to confirm. Playback starts from the selected section.  
Note:  
If the chapter numbers you entered is not permitted by the DVD, after you press the ENTER button, it will  
restore to - - -. You should re-enter correct numbers.  
Some discs may not respond to this process.  
This method of locating a chapter is available only on a DVD that contains chapter numbers.  
13  
RCA DRC69702 IB.indd 13  
11/25/2008 2:29:00 PM  
Locating a Specific Time  
You can move to a specific location by entering its corresponding time (hours, minutes, seconds).  
1. Press the GOTO button.  
2. Press the or button to display Time and press the corresponding number buttons for the setting point  
you want.  
3. Press the ENTER button to confirm. Playback starts from the selected section.  
Note:  
If the time numbers you entered is not permitted by the DVD, after you press the ENTER button, it will  
restore to - - : - - : - -. You should re-enter correct numbers.  
Some discs may not respond to this process.  
Some scenes may not be located as precisely as you specified.  
This method for accessing specific locations is available only within the current title of the DVD.  
DVD Programmable Memory  
Playing Titles/Chapters in a Favorite Order  
You can combine your favorite titles/chapters and play them in the order you determine.  
1. When a DVD is stopped, press the MEMORY button and the following display appears.  
2. Select the items in the order you want by pressing the number buttons.Each time you press the Cursor  
buttons (  
corresponding number buttons.  
3. Press the Cursor buttons (  
,
,
,
), the space is highlighted. Highlight where you want to enter, then press the  
,
,
,
) to move the highlighted bar  
to Play Memory, then press the ENTER button. The DVD player  
starts memory playback.  
4. To resume normal playback from memory playback  
a) Press the MEMORY button in stop mode.  
b) Press the Cursor buttons (  
,
,
,
) to move the highlighted  
bar to “Clear All”, then press the ENTER button. All the input  
programs will be cleared.  
c) Press the  
PLAY button to resume normal playback.  
Note:  
If the title or chapter numbers you entered is not permitted by the DVD, after you press the ENTER button,  
it will restore to - - -. You should re-enter correct numbers.  
Some discs may not permit memory playback operation.  
If you select repeat during memory playback, the DVD player repeats the current memory playback.  
If you press the MEMORY button while the display appears on the TV screen, the display disappears.  
The programmed selections will be cleared when you open the disc tray or turn off the DVD player.  
14  
RCA DRC69702 IB.indd 14  
11/25/2008 2:29:01 PM  
Repeat Playback  
You can play a specific title or chapter repeatedly. Title repeat, chapter repeat, A-B repeat.  
Repeating a Chapter  
1. While the DVD is playing, press the REPEAT DISC button until the “  
” indicator displays on  
the screen. The current chapter is played repeatedly.  
Repeating a Title  
2. While the DVD is playing, press the REPEAT DISC button until the “  
screen. The current title is played repeatedly.  
” indicator displays on the  
” indicator displays on the  
To Resume Normal Playback  
3. While the DVD is playing, press the REPEAT DISC button until the “  
screen.  
You can play a single track or the whole disc repeatedly.  
Repeating a Single Track  
1. While the CD is playing, press the REPEAT DISC button until the “  
screen. The current track is played repeatedly.  
” indicator displays on the  
” indicator displays on the  
Repeating a Whole Disc  
2. While the CD is playing, press the REPEAT DISC button until the “  
screen. The whole disc is played repeatedly.  
To Resume Normal Playback  
3. Press the REPEAT DISC button until the “  
” indicator displays on the screen.  
Repeating a Specific Section  
You can play a specific section repeatedly.  
1. While the disc is playing, press the REPEAT A-B button at the beginning of the section (“  
” is  
displayed) you want to play repeatedly.  
2. Press the REPEAT A-B button again at the end of the section (“  
” is displayed).  
3. The Unit will immediately begin replaying your selection.  
To Resume Normal Playback  
While the disc is playing, press the REPEAT A-B button until the “  
” indicator displays on the  
screen.  
Note:  
Some discs may not permit A-B repeat operation.  
You cannot set the A-B repeat function for a segment that includes multiple camera angles.  
You can specify a segment only within the current title or track.  
There may be a slight difference between point A and the location where playback actually resumes  
depending on the disc.  
15  
RCA DRC69702 IB.indd 15  
11/25/2008 2:29:02 PM  
Viewing JPG Files  
This unit can play JPG files recorded on a CD-R or CD-ROM disc (CD-RW is not recommendable).  
Viewing JPG Files  
1. Open the disc door.  
2. Hold a JPG file disc by its edge and gently push it onto the spindle  
with the label side facing up until you hear a “click”.  
3. Close the disc door. A list of folders/files will appear on the  
screen.  
4. Press the or button to select your desired file. The selected  
picture will appear at the lower right corner. Press the  
PLAY  
button to start playback. Press the  
folder list.  
STOP button to display a  
Note:  
You can press the PAUSE button to interrupt playback. Press the  
You can press the STOP button to quit playback.  
PLAY button to resume playback.  
You can press the  
PREV or  
NEXT button to change the picture.  
You can press the ANGLE button to rotate direction of the picture by 90°.  
Some discs may not permit this operation.  
16  
RCA DRC69702 IB.indd 16  
11/25/2008 2:29:03 PM  
Play Modes for CD or JPG Disc  
When playing CD / JPG discs, you can modify the Play Modes through the Toolkit which appears on the  
picture on the screen. Press the  
/
button to navigate between the windows and the  
/
button to  
select files/tracks or play mode items. Then press the ENTER button.  
1. In Stop mode, press the Cursor buttons (  
,
,
,
) to select "Edit mode" then press the ENTER button.  
2. Use the Cursor buttons ( ) to select tracks/files shown on the left hand side of the window. Press  
,
,
,
the ENTER button to confirm the selected tracks/files. " " will appear in front of the selected tracks/  
files.  
3. Select "Add to program", then press the ENTER button. " " will disappear from the screen. It means  
that the tracks/files you have selected are added into the "Program view".  
4. Select "Program view" to view programmed files. To add more files by "Browser view" follow the steps.  
5. Press the  
PLAY button to start the program playback.  
The Toolkit has the following play mode items:  
Repeat ( Off / Single / All ):  
Off: Resumes normal playback.  
Single: Repeats the current track/file.  
All: Repeats all files on the current folder or all tracks on the  
disc.  
Mode ( Normal / Shuffle / Music intro ):  
Normal: Resumes normal playback.  
Shuffle: Plays back tracks/files in random order.  
Music intro (for Audio CD only): Only plays back the first 10  
seconds of all the tracks on the current folder/disc.  
Edit mode: Program operation works only when "Edit mode" is  
selected.  
Program view: To view tracks/files in the "Program view" list. It is disabled when the "Program view" list  
is empty.  
Add to program: Add files/tracks to the "Program view" list. It is disabled if the "Edit mode" is not  
selected.  
Browser view: To view files/tracks in the original view list.  
Clear program: Delete the files/tracks in the "Program view" list.  
Select a file/track or more you want to delete in complete stop mode (press the  
" will appear beside the deleted file/track. Select "Clear program" and then press the ENTER button. It  
is disabled if the "Edit mode" is not selected.  
STOP button twice).  
"
Note: The program will be deleted if the disc door is opened, or selected files are deleted by selecting "Clear  
program".  
17  
RCA DRC69702 IB.indd 17  
11/25/2008 2:29:03 PM  
Customizing the Function Settings  
LANGUAGE  
OSD Language  
1. Press the SETUP button in stop mode.  
2. Press the button to select OSD Language.  
3. Press the ENTER button, then the  
change the Language.  
/
button to shift and  
4. Press the ENTER button.  
5. Press the SETUP button or RETURN button to exit the menu.  
Subtitle  
1. Press the SETUP button in stop mode.  
2. Press the button, then the  
3. Press the ENTER button, then the  
change the Language.  
/
button to select Subtitle.  
button to shift and  
/
4. Press the ENTER button.  
5. Press the SETUP button or RETURN button to exit the menu.  
Note:  
• Some DVDs may be set to display subtitles in a different language  
other than the ones you selected. A prior subtitle language may  
be programmed on the disc.  
Some DVDs allow you to change subtitle selections using the  
disc menu only. If this is the case, press the MENU button and  
choose the appropriate subtitle language from the selection on  
the disc menu.  
Audio  
1. Press the SETUP button in stop mode.  
2. Press the button, then the  
/
button to select Audio.  
button until your  
3. Press the ENTER button, then the  
preferred Audio is displayed.  
4. Press the ENTER button.  
/
5. Press the SETUP button or RETURN button to exit the menu.  
Note:  
• Some DVDs may not be played in the language you selected. A  
prior language may be programmed on the disc.  
DVD Menu  
1. Press the SETUP button in stop mode.  
2. Press the button, then the  
3. Press the ENTER button, then the  
/
button to select DVD Menu.  
button until your  
/
preferred DVD Menu language is displayed.  
4. Press the ENTER button.  
5. Press the SETUP button or RETURN button to exit the menu.  
Note:  
Some DVDs may not include your pre-selected language. In  
this case, the DVD player automatically displays disc menus  
consistent with the disc's initial language setting.  
18  
RCA DRC69702 IB.indd 18  
11/25/2008 2:29:04 PM  
Customizing the Function Settings  
VIDEO  
Aspect Ratio  
1. Press the SETUP button in stop mode.  
2. Press the  
3. Press the  
Ratio.  
/
button to select Video.  
button, then the button to select Aspect  
/
4. Press the ENTER button, then the  
change the aspect ratio.  
/
button to shift and  
5. Press the ENTER button.  
6. Press the SETUP button or RETURN button to exit the menu.  
Note:  
The displayable picture size is preset on the DVD. Therefore,  
the playback picture of some DVDs may not conform to the picture size you select.  
When you play DVDs recorded in the 4:3 picture size only, the playback picture always appears in the 4:3  
picture size regardless of the Aspect Ratio setting.  
Select 16:9 to conform to the LCD screen on the unit. Always be sure that your Aspect Ratio conforms to  
the actual TV in use if you connect the unit to a TV.  
View Mode  
1. Press the SETUP button in stop mode.  
2. Press the  
3. Press the  
Mode.  
4. Press the ENTER button, then the  
change the View Mode.  
/
button to select Video.  
button, then the  
/
button to select View  
button to shift and  
/
5. Press the ENTER button.  
6. Press the SETUP button or RETURN button to exit the menu.  
Fill  
Fill the screen with decoded image.  
Original  
Auto Fit  
Display image as its original size.  
Automatically fit the decoded image on screen without distortion. Black bars will be present on  
top/bottom or left/right of screen.  
Pan Scan  
Select when a standard 4:3 TV is connected. Displays pictures cropped to fill your TV screen.  
Sides of the picture are cut off.  
Note:  
• Depending on the DVD, you may not be able to view the mode as selected.  
19  
RCA DRC69702 IB.indd 19  
11/25/2008 2:29:05 PM  
Customizing the Function Settings  
MISC  
Use Default Settings  
1. Press the SETUP button in stop mode.  
2. Press the  
/
button to select Misc.  
3. Press the button, then press the  
“Use Default Settings” dialogue box.  
4. Press the ENTER button, then press the  
/
button to select  
button to  
/
select “Yes”. Press the ENTER button and the original  
setting will be restored. The unit will exit the default  
setting menu automatically and re-load the disc in the disc  
tray.  
Note: It will take 3-5 seconds to reset the DVD player to the  
factory default.  
Screen Saver  
1. Press the SETUP button in stop mode.  
2. Press the  
/
button to select Misc.  
3. Press the button, then press the  
Screen Saver.  
4. Press the ENTER button, then press the  
change the On/Off mode.  
/
button to select  
button to  
/
5. Press the ENTER button.  
6. Press the SETUP button or RETURN button to exit the  
menu.  
Maintenance  
Cleaning the Disc  
A defective or soiled disc inserted into the unit can cause sound to drop out during playback.  
Handle the disc by holding its inner and outer edges.  
Do NOT touch the surface of the unlabeled side of the disc.  
Do NOT stick paper or tape on the surface.  
Do NOT expose the disc to direct sunlight or excessive heat.  
Clean the disc before playback. Wipe the disc from the center outward with a cleaning  
cloth.  
NEVER use solvents such as benzine or alcohol to clean the disc.  
Do NOT use irregular shaped discs (example: heart shaped, octagonal, etc.). They may cause  
malfunctions.  
Cleaning the Unit  
Be sure to turn the unit off and disconnect the power source before maintaining the unit.  
Wipe the unit with a dry soft cloth. If the surfaces are extremely dirty, wipe clean with a cloth that has  
been dipped in a weak soap-and-water solution and wrung out thoroughly. Then wipe with a dry cloth.  
Never use alcohol, benzine, thinner, cleaning fluid or other chemicals. Do NOT use compressed air to  
remove dust.  
Important Note  
Before transporting the unit, remove any disc from the disc compartment.  
20  
RCA DRC69702 IB.indd 20  
11/25/2008 2:29:05 PM  
Troubleshooting Guide  
SYMPTOM  
CAUSE (AND REMEDY)  
No power.  
Ensure the car power adapter is connected.  
Make sure that the unit is turned on.  
The remote control  
does not function.  
Remove any obstacles between the remote and the unit.  
Use the remote near the unit.  
Point the remote at the remote sensor on the unit.  
Replace the battery in the remote with new one.  
Make sure plastic sheet has been removed from battery section.  
Very little or no sound  
is coming from a DVD.  
Make sure that you select ON mode.  
Make sure the unit is not paused. Press the  
Make sure the unit is not in fast-forward or fast-reverse mode. Press the  
PLAY button.  
PLAY button.  
Make sure the AUDIO/VIDEO input/output connections are correct.  
The DTS DVD cannot be decoded to have speaker output.  
The unit has overheated. Shut it off for 30 minutes to allow it to cool down.  
The volume control is located on the side of the unit - please try adjusting  
this.  
No picture.  
The region number of the disc doesn't match the region number of this unit.  
The picture is not  
clear.  
The DVD is dirty. Gently clean the disc.  
The disc is scratched.  
Please adjust the LCD's brightness, contrast, color or view mode using the  
VIDEO MODE button on the remote control.  
Loud hum or noise is  
heard.  
The plugs and jacks are dirty. Wipe them with a cloth slightly moistened with  
alcohol.  
Clean the disc.  
The disc does not play.  
There is no disc inside the unit ("No Disc" appears on the screen).  
Insert the disc correctly with the graphics facing up.  
Clean the disc.  
A non-NTSC disc has been inserted, or the disc region number does not match  
the region number of the unit.  
Condensation may have formed inside the unit due to a sudden change in  
temperature. Wait about an hour for it to clear and try again.  
Specifications and external appearance are subject to change without notice.  
21  
RCA DRC69702 IB.indd 21  
11/25/2008 2:29:06 PM  
Limited Warranty  
AVC MULTIMEDIA (“AVC”) makes the following limited warranty. This limited warranty extends to the original consumer  
purchaser and is limited to non-commercial use of the product.  
One Year Parts & Labor Warranty  
AVC products purchased in the United States are warranted to be free from defects in materials or workmanship for a  
period of one year from the date of their original retail purchase. If the unit fails to conform to this warranty, we will  
service the product using new or refurbished parts and products, at AVC’s sole discretion.  
During a period of one year from the effective warranty date, AVC will provide, when needed, service labor to repair a  
manufacturing defect at its designated Service Center. To obtain warranty service in the Untied States, you must first call  
our Customer Support Center at 1-800-506-5746 or 1-877-252-6873, during the hours listed in the box below.  
The determination of service will be made by AVC Customer Support. PLEASE DO NOT RETURN YOUR UNIT TO AVC  
WITHOUT PRIOR AUTHORIZATION. New or remanufactured replacements for defective parts or products will be used for  
repairs by AVC at its designated Service Center for one year from the effective warranty date. Such replacement parts or  
products are warranted for an additional one year from the date of repair or replacement. The Customer will be required  
to ship the unit to the Service Center indicated at the time Customer Support is contacted to make the necessary repairs.  
The customer is responsible for all transportation charges to the service facility.  
Packaging and Shipping Instruction  
When you send the product to the AVC service facility you must use the original carton box and packing material or an  
equivalent as designated by AVC.  
LIMITED WARRANTY  
Your Responsibility  
(1) You must retain the original sale receipt to provide proof of purchase.  
(2) These warranties are effective only if the product is purchased and operated in the U.S.A. or Canada.  
(3) Warranties extend only to defects in material or workmanship, and do not extend to any product or parts which have  
been lost or discarded, or damage to product or parts caused by misuse, accident, improper operation or maintenance,  
or use in violation of instructions provided with the product, or to product which has been altered or modified without  
authorization of AVC, or to products or parts thereof which have had the serial number removed or changed.  
Out of Warranty  
In the event your product requires repair after the limited warranty period has expired, please contact our Customer  
Support Center at 1-800-506-5746, 1-877-252-6873 or www.1800customersupport.com/RCA  
Hours: Monday–Thursday: 9am–7pm, Friday: 9am–5pm, Saturday: 9am–NOON Eastern time.  
Important: You are responsible for any transportation, shipping or insurance relative to the return of product to our  
Product Returns Center.  
All warranties implied by state law, including the implied warranties of merchantability and fitness for a particular purpose,  
are expressly limited to the duration of the limited warranties set forth above. With the exception of any warranties  
implied by state law as hereby limited, the foregoing warranty is exclusive and in lieu of all other warranties, guarantees,  
agreements and similar obligations of manufacturer or seller with respect to the repair or replacement of any parts. In no  
event shall AVC be liable for consequential or incidental damages.  
No person, agent, distributor, dealer or company is authorized to change, modify or extend the terms of these warranties  
in any manner whatsoever. The time within action must be commenced to enforce any obligation of AVC arising under the  
warranty or under any statute, or law of the United States or any state thereof, is hereby limited to one year from the date  
of purchase. This limitation does not apply to implied warranties arising under state law.  
This warranty gives you specific legal rights and you may also have other rights, which may vary, from state to state. Some  
states do not allow limitation on how long an implied warranty lasts, when an action may be brought, or the exclusion or  
limitation of incidental or consequential damages, so the above provisions may not apply to you.  
For more information on other products and services, please visit our web site at  
www.1800customersupport.com/RCA  
Important: Also keep your “Bill of Sale” as proof of purchase.  
Model no. ..........................................................................Product name...............................................................................  
Type of set ................................................................................................................................................................................  
Serial no.............................................................................Invoice no.....................................................................................  
Date purchased .................................................................Dealer name.................................................................................  
FOR SERVICE AND REPAIR, PLEASE VISIT www.1800customersupport.com/RCA  
22  
RCA DRC69702 IB.indd 22  
11/25/2008 2:29:06 PM  
RCA DRC69702 IB.indd 23  
11/25/2008 2:29:06 PM  
AVC Multimedia  
Markham, Ontario L3R 1E3  
http://www.1800customersupport.com/RCA  
Printed in China  
811-770191W030  
RCA DRC69702 IB.indd  
2
11/25/2008 2:52:49 PM  

RCA DRC97983 User Manual
Raypak 241275 User Manual
QSC Audio Car Speaker KW181 User Manual
Philips SCB4375NB User Manual
Panasonic AG HPX301E User Manual
Nikon Camcorder WT 2A User Manual
Laney Amplification Car Speaker CX10 User Manual
Kambrook Cable Box keb442 User Manual
JVC LYT2152 001A M User Manual
JVC LYT0190 001B User Manual