RCA CC6151 User Manual

camcorder  
user's guide  
CC6151/CC6251/CC6271  
Assistance  
We want to make sure you enjoy your new camcorder. If you have any  
questions, call:  
Camcorder Exchange Warranty...........800-283-6503 (pages 84-85)  
Customer Service...................................800-336-1900 (page 83)  
Accessories............................................. 800-338-0376 (pages 70-75)  
Table of Contents  
Safety Information.............................. i  
Power Your Camcorder  
• Use the Adapter/Charger to  
Power Your Camcorder ............ 12  
• Use the Battery to Power  
Your Camcorder...................13-15  
• Use the Optional DCC08  
First Time Operation  
• Assistance ....................................... 3  
• Unpack the Camcorder and  
Accessories ................................. 3  
• Attach the Adapter/Charger ............ 4  
• Adjust the Handstrap to Fit  
Car Cord Adapter ..................... 16  
Date and Time Display  
Your Hand .................................. 4  
• Slide LENS COVER Control to  
Open Lens Cover........................ 4  
• Insert a Tape .................................... 5  
• Set POWER (CAMERA/OFF  
VCR) Switch to CAMERA .......... 5  
• Adjust the Viewfinder  
and Eyepiece Focus Control........ 6  
• Select a Recording Speed................ 6  
• Select a Tape Length ....................... 7  
• Set the AE Dial to AUTO................. 8  
• Start and Stop Recording ................ 8  
• Play Back What you Have  
• Install Clock Lithium Cell ........ 17  
• Set the Date and Time..........18-19  
• Record the Date, Time, and  
Title Displays ................... 20-21  
Videocassettes  
• Erase Protection ............................ 22  
• Recording and Playback  
Speeds and Times ..................... 22  
• Insert and Remove Cassettes......... 23  
• Cassette Care and Storage............. 23  
Recording  
Recorded .................................... 9  
• Set the POWER Switch to OFF  
to Turn Off the Camcorder ........ 9  
• Close the Lens Cover ...................... 9  
• Review Camcorder’s  
• Time-Remaining Display .........24-25  
• Recording Tips .............................. 26  
• Use the Viewfinder to See  
What You Record...................... 27  
• Viewfinder Displays .................28-31  
• Full Auto Mode ............................. 32  
Operating Controls .............. 10-11  
1
Table of Contents  
• Quick Record Feature ................... 33  
• Quick Review Feature ................... 33  
• Tally Light ..................................... 33  
• Camera Edit Feature ..................... 33  
• Flying Erase Head ......................... 33  
• Auto Head Cleaner ........................ 33  
• Zooming  
• Use the Zoom Buttons .........34-35  
• Tele Macro Zooming ................ 35  
• Focusing  
• Auto Focus................................ 36  
• Manual Focus ......................36-37  
• White Balance ..........................38-39  
• Exposure Control .....................40-41  
• Fade In and Out ............................. 42  
AE Dial .......................................... 43  
• Front Light and Back Light........... 44  
• Travel Tips .................................... 45  
• Titles  
Playback  
• Use the Viewfinder for  
Playback ..............................60-61  
• Tracking ........................................ 61  
• Playback Features  
• Position the Tape ...................... 62  
• Visual Search ............................ 62  
• Stop-Action Pause .................... 62  
• Time Counter ............................ 63  
• Memory-Stop Feature ........... 63  
• Use the Cassette Adapter .........64-65  
• Playback on TV (or VCR)  
with Audio/Video Inputs .....66-67  
• Playback on a TV Without  
Audio/Video Inputs .............68-69  
Optional Accessories...................70-75  
• Accessory Order Form .............73-75  
Trouble Checks ...........................76-79  
Care and Maintenance  
• Record a Preset Title or  
Title You Create.................... 46  
• Clean the Camcorder..................... 80  
• Clean the Camcorder’s Lens ......... 80  
• Clean the Camcorder’s  
Viewfinder ................................. 80  
• Proper Care and Storage ............... 81  
• Things to Avoid ............................. 81  
• Create Your Own Title .............. 47  
• Self-Timer Recording...............48-49  
• Animation Recording ...............50-51  
• Time-Lapse Recording .............52-53  
• Tally Light (Turn On or Off) ......... 54  
• Demo Mode .................................. 55  
• JLIP (Joint Level Interface  
Specifications.................................... 82  
Information to User ......................... 82  
Customer Assistance ........................ 83  
Limited Warranty .......................84-85  
Index ............................................86-89  
Protocol) Identification  
Number..................................... 56  
• Attach the Shoulder Strap ............. 57  
• Model CC6271 Only: Built-In Color  
Enhancement Light .............58-59  
2
First-Time Operation  
This section describes the steps necessary to set up your camcorder to record. Refer to  
the other sections for detailed operation and feature options.  
Assistance  
The toll-free numbers are available to help you with any problem you may encounter.  
Camcorder Exchange Warranty...............800-283-6503  
Customer Service................................... 800-336-1900  
Accessories............................................. 800-338-0376  
1. Unpack the camcorder and accessories.  
• Save the packing materials and box in case you ever need to ship  
or store your camcorder.  
• The items shown below are packed with your camcorder. If any  
are missing or appear damaged, contact your dealer immediately.  
S
U A  
P /  
U
I
C
K
R
E
Y L  
Q
T
E / T I M E C  
O U N T E R  
A
D
S
P / S L P  
WARNING:  
NICKEL  
MA  
N
CADMIUM  
BATTERY  
P
L
I
T
T
T
N
O
AU  
T
R
O
F
T
T
I
LE  
FA  
D
A
E
S
E
P
I
A
H
B
G
I
C
K
L
W
1 / 1 0 0 0  
S
H
D
H
AZE  
MUST BE  
RECYCLED  
OR DISPOSED  
OF PROPERLY.  
Shoulder Strap  
Part No. ACS091  
Rechargeable Battery  
Part No FB1260  
or BB700  
Model CC6151 or CC6251 or  
CC6271 Camcorder*  
(*Your camcorder may appear slightly  
different than the one shown.)  
Caution: Do not use  
this adapter/charger  
for any purpose other  
than charging the  
FB1260, BB700, or  
FB120 battery pack or  
supplying power to  
the camcorder.  
+
-
Cassette Adapter Cassette Adapter Battery  
Part No. VCA115A (Size "AA" 1.5 Volt)  
AC Adapter/Charger Part No. 241017  
and DC Cable Part No. 233087  
CAUTIONS: Lithium cell must be disposed of properly. Never handle  
punctured or leaking cell. May cause burns or personal injury.  
Clock Cell  
Keep out of the hands of children. Can cause death or injury if swallowed.  
If swallowed, consult a physician immediately for emergency treatment.  
3-Volt Micro Lithium  
Cell – such as CR2025 –  
available from most local  
drug stores and camera  
shops. Use of other cells  
present a risk of fire or  
explosion.  
The lithium cell used in this device may explode resulting in a fire or  
chemical burn if mistreated. Do not recharge, disassemble, heat above  
212°F (100°C), or incinerate.  
Never use metallic tweezers to hold the cell, and never short circuit the +  
and – sides of the cell.  
(continued on next page)  
3
First-Time Operation  
2. Attach the adapter/charger.  
To AC 100-240,  
50/60 Hz  
Adapter/  
Charger  
DC Cable  
VCR  
POWER  
OFF  
CAMERA  
DC OUT  
Jack  
DC In Jack  
Since the battery must be charged  
before it can be used the first time,  
attach the adapter/charger to the  
camcorder.  
• Connect the other end of the DC  
cable to the DC in jack on the  
camcorder as shown above.  
• Plug the adapter/charger’s plug  
into an operating outlet.  
• Connect one end of the DC cable  
to the DC OUT jack on the  
adapter/charger.  
3. Adjust the handstrap to fit your hand.  
LENS  
• Lift the flap on the  
handstrap and separate  
the velcro strip.  
Cover  
Control  
Handstrap  
• Insert your hand, adjust  
the strap to fit snugly,  
refasten the strap, and  
close the flap.  
Handstrap Velcro  
Strip (Under Flap)  
4. Slide LENS COVER control to open lens cover.  
4
First-Time Operation  
5. Insert a tape.  
EJECT Button  
Tape Wheel  
Tape Window  
PUSH Here to  
Close Cassette  
Compartment  
• Slide the EJECT button up.  
The cassette holder opens  
automatically.  
• Insert the cassette with the tape  
wheel facing up and the tape  
window facing out.  
• Turn the tape wheel on the  
cassette to remove any slack  
from the tape.  
• Press on the area labeled PUSH  
until the cassette holder locks  
into place.  
6. Set POWER (CAMERA/OFF/VCR) switch to CAMERA.  
POWER  
VCR  
POWER  
OFF  
CAMERA  
Switch and  
Indicator  
• The power indicator lights and the  
camcorder enters record-pause.  
power off (OFF), or play back  
tapes (VCR).  
PAUSE  
appears in the  
• The camcorder automatically turns  
off if it remains in record-pause  
for five minutes. Set POWER  
switch to OFF and then back to  
CAMERA.  
viewfinder when the camcorder is  
in record-pause.  
• The position of this switch tells  
the camcorder whether you want  
to record (CAMERA), turn the  
(continued on next page)  
5
First-Time Operation  
SP/SLP  
Button  
Eyepiece  
Focus  
Control  
Electronic  
Viewfinder  
SP/SLP  
TE/TIME  
A
D
COUNTER R/M  
UICK REC  
Q
L
P
VCR  
M
A
AU  
N
T
O
O
N
T
L
R
F
I
G
SEPIA  
H
T
EJECT  
F
ADE  
TITLE  
B
A
C
K
L
H T  
I
G
P
S
H
A
Z
E
1
/ 1 0 0 0  
OFF  
AU  
T
O
ON  
L
I
G
H
T
7. Adjust the viewfinder and eyepiece focus control.  
You can see what you record in the  
viewfinder.  
• Turn the eyepiece focus control to  
adjust the focus of the viewfinder  
for your vision.  
• Adjust the viewfinder for a  
comfortable viewing position.  
8. Select a recording speed.  
Select SP or SLP recording speed.  
Press and hold the SP/SLP button to  
select a recording speed. The tape  
speed you select (SP or SLP) appears  
in the viewfinder.  
recording time (20 minutes with a  
TC-20 tape).  
• SLP – Extended play provides  
three times the recording time as  
SP (60 minutes with a TC-20  
tape). SLP has slightly more  
picture noise in normal playback.  
• SP – Standard play provides the  
best picture, but the shortest  
6
First-Time Operation  
SP/SLP  
TE/TIME  
A
D
COUNTER R/M  
UICK REC  
Q
L
P
VCR  
M
A
AU  
N
T
O
O
N
T
L
R
F
I
G
SEPIA  
H
T
EJECT  
F
ADE  
TITLE  
B
A
C
K
L
H T  
I
G
P
S
H
A
Z
E
1
/ 1 0 0 0  
OFF  
AU  
T
O
ON  
L
I
G
H
T
MENU Dial  
9. Select a tape length.  
Set the length of the tape you are  
• Select T20 for a tape with 20  
minutes or less recording time  
in SP.  
using so the camcorder can correctly  
calculate the recording time  
remaining on the tape.  
• Select T30 for a tape with 30  
minutes recording time in SP.  
• Place the AE dial in MAN, and  
press the MENU dial to display  
the MENU in the viewfinder.  
Rotate the dial to select TAPE  
LENGTH.  
• Select T40 for a tape with 40  
minutes recording time in SP.  
• Press the MENU dial twice to  
remove the menus from the  
viewfinder.  
• Press the MENU dial in to display  
the TAPE LENGTH menu. Rotate  
the dial to select the length of tape  
you are using (T20, T30, or T40).  
• Details are on pages 24-25.  
7
First-Time Operation  
VCR  
POWER  
OFF  
CAMERA  
Power  
Indicator  
U
I C K R E  
U
Q
T E / T I M E C O U N T E R  
A
D
S P / S L P  
Thumb  
Trigger  
POWER (VCR/  
OFF/CAMERA)  
MA  
Switch  
N
P
H
G
T
AU  
R
T
O
TITLE  
ADE  
B
F
SEPIA  
W
1 / 1 0 0 0  
SHD  
AU  
T
O
T
FADE  
TITLE  
SEPIA  
I
W
SHD  
1 / 1 0 0 0  
H
AZE  
Tally  
Light  
AE Dial  
10. Set the AE dial to AUTO.  
• This places the camcorder in the  
• Many of the special effects do not  
AUTO mode.  
operate in the AUTO mode.  
• In the AUTO mode, the focus,  
exposure, and white balance are  
automatically controlled by the  
camcorder.  
Details on page 32.  
11. Start and stop recording.  
• Press and release the thumb trigger  
• Press and release the thumb trigger  
again to stop recording. The  
REC  
to start recording.  
appears in  
camcorder is now in the record-  
the viewfinder, and the tally light  
lights while the camcorder is  
recording.  
pause mode.  
appears in  
PAUSE  
the viewfinder.  
(continued on next page)  
8
First-Time Operation  
PLAY/PAUSE  
Button  
VCR  
Button  
VCR  
STOP  
Button  
U I C K R E  
Q
T E / T I M E C O U N T E R  
A
D
S P / S L P  
MA  
N
P
H
AU  
T
O
TITLE  
ADE  
B
F
SEPIA  
W
1 / 1 0 0 0  
SHD  
13. Set the POWER switch to  
OFF to turn off the  
camcorder.  
12. Play back what you have  
recorded.  
• Set the POWER switch to VCR.  
• Press VCR to rewind the tape.  
The power indicator turns off.  
• Press PLAY/PAUSE to play back  
the tape.  
14. Close the lens cover.  
• Press STOP when you are finished  
playing back the tape.  
Details on viewfinder playback are  
on pages 60-61.  
(continued on next page)  
9
First-Time Operation  
15. Review camcorder’s operating controls.  
PLAY/PAUSE  
Button  
VCR  
Button  
VCR  
VCR  
Button  
QUICK REC  
(Record) Button  
STOP  
Button  
DATE/TIME Button  
(Also COUNTER R/M Button)  
SP/SLP Button  
Model CC6271  
Only: Color  
Enhancement  
Light  
U
U I C K R E  
L
Q
T E / T I M E C O U N T E R  
A
D
S P / S L P  
MA  
N
P
S
G
T
AU  
R
T
O
TITLE  
ADE  
B
F
SEPIA  
M
A
N
L
W
1 / 1 0 0 0  
Lens  
SHD  
AU  
T
O
T
FADE  
TITLE  
I
SEPIA  
Tally  
Light  
W
SHD  
1 / 1 0 0 0  
Microphone  
AE Dial  
10  
First-Time Operation  
15. Review camcorder’s operating controls. (continued)  
Shoulder Strap  
Attachment Ring  
SP/SLP  
TE/TIME  
A
D
COUNTER R/M  
UICK REC  
Q
L
P
VCR  
M
A
AU  
N
T
O
O
N
T
L
R
F
I
G
SEPIA  
H
T
EJECT  
F
ADE  
EJECT Button  
TITLE  
B
A
C
K
L
H T  
I
G
P
        H
H
A
Z
E
1
/ 1 0 0 0  
OFF  
AU  
T
O
ON  
PUSH Here to  
Close Cassette  
Compartment  
L
I
G
H
T
MENU  
Dial  
BATT. (Battery)  
RELEASE Button  
Shoulder Strap  
Attachment Ring  
Model CC6271 Only: LIGHT  
OFF•AUTO•ON Switch  
Viewfinder  
Eyepiece Focus Control  
Models CC6251 and  
CC6271 Only  
Power Zoom Buttons  
B (Bright) and C  
(Color) Controls  
(See Trouble Checks for  
Details)  
LENS  
COVER  
Control  
Clock Cell Battery  
Compartment  
Handstrap  
Attach Rechargeable  
Battery Here  
VCR  
POWER  
OFF  
CAMERA  
Attach Adapter/  
Charger’s DC  
Cord Here  
Power Indicator  
POWER (VCR/OFF/  
CAMERA) Switch  
JLIP Connector  
Thumb Trigger  
(Located Under  
Small Cover)  
AUDIO (MONO), RF DC, and  
VIDEO OUT Jacks  
(Located Under Small Cover)  
11  
Power Your Camcorder  
Use the Adapter/Charger to Power Your Camcorder  
The adapter/charger attaches to the camcorder and lets you power your camcorder  
directly from standard household power. The adapter/charger operates on 100-240  
volts, 50/60 Hz, so it can be used virtually anywhere in the world to power the  
camcorder or recharge the battery.  
To AC 100-240,  
50/60 Hz  
Adapter/  
Charger  
DC Cable  
VCR  
POWER  
OFF  
CAMERA  
DC OUT  
Jack  
DC In Jack  
Attach Adapter/Charger  
Remove Adapter/Charger  
1. Connect one end of the DC cable to  
the DC OUT jack on the adapter/  
charger.  
1. Unplug the adapter/charger from the  
wall outlet.  
2. Remove the DC cable from the  
adapter/charger and camcorder.  
2. Connect the other end of the DC cable  
to the DC in jack on the camcorder as  
shown above.  
Using an Optional Plug Adapter  
3. Plug the adapter/charger’s plug into  
the nearest AC outlet (100-240V,  
50/60Hz).  
An optional plug adapter might be  
required in some countries.  
CAUTION: Do not use this adapter/  
charger for any other purpose other  
than charging the FB1260, BB700, or  
FB120 battery pack or supplying  
power to the camcorder.  
AC 100-240V  
Optional AC  
Adapter  
1. Plug the adapter/charger’s plug into  
the AC plug adapter.  
2. Plug the AC plug adapter into the AC  
outlet.  
12  
Power Your Camcorder  
Use the Battery to Power Your Camcorder  
The battery must be charged as described on the next page before it can be used the  
first time. Initial charging takes approximately 70 minutes for the FB1260 (100  
minutes for the BB700). When fully charged, the FB1260 supplies approximately  
50-55 minutes (BB700 approximately 75-85 minutes) of operating time – depending  
on how much you use the light, zoom, and pause. Conserve battery power by turning  
the camcorder off during recording breaks.  
Note: Use the small marker switch on the top of the battery to help remind yourself to charge  
the battery. It has no other purpose.  
Marker  
Switch  
Battery Safety Precautions  
Do not short the battery’s  
SP/SLP  
TE/TIME  
DA  
COUNTER R/M  
QUICK REC  
terminals.  
Do not attempt to disassemble or  
modify the battery. There are no  
M
A
user-serviceable parts inside.  
Use the battery only with  
specified adapter/chargers and  
camcorders.  
Throwing the battery into a fire  
or exposing it to excessive heat –  
over 149˚F (65˚C) could be  
hazardous.  
AUT  
N
O
O
N
T
L
R
F
I
G
SEPIA  
H
EJECT  
F
A
D
E
T
I
T
L
E
B
A
C
K
L
T
I
G
H
P
H
A
Z
E
1
/ 1 0 0 0  
OFF  
O
AUT  
ON  
L
I
G
H
T
BATT. RELEASE  
Button  
Attach the Charged Battery  
2. Press the battery down until it locks  
into place.  
If the DC cable is attached to the  
camcorder, remove it before attaching  
the battery. Also, install the lithium  
clock cell before attaching the battery.  
Details are on page 17.  
3. Set the POWER switch to CAMERA.  
The power indicator lights.  
Remove the Battery  
1. Hook the top end of the battery to the  
back of the camcorder as shown  
above.  
Slide and hold the BATT. RELEASE  
button to the right while removing the  
battery.  
ATTENTION: The RBRC seal on the battery used in your Thomson  
Consumer Electronics product indicates that we are participating in a  
program to collect and recycle Nickel Cadmium batteries throughout the  
United States. Please call 1-800-8-BATTERY for information or  
contact your local recycling center.  
Ni-Cd  
13  
Power Your Camcorder  
Use the Battery to Power Your Camcorder (continued)  
Hold Battery Flush  
and Slide  
Reference  
Marks  
To AC Wall  
Outlet 100-  
240 Volts,  
50/60 Hz.  
CHG  
(Charge)  
Indictor  
Adapter/Charger  
REFRESH  
Indicator  
REFRESH  
Button  
Caution: When a battery is attached to the adapter/charger, do not turn them  
upside down. The battery may fall off and be damaged or cause injury.  
Charge the Battery  
Use the REFRESH Button  
If the DC cable is attached to the DC OUT  
jack on the adapter/charger, remove it.  
The battery provides increased  
operation time if you “refresh” it after  
five chargings. The refresh feature  
“refreshes” the battery by completely  
discharging it.  
1. Align reference mark on battery with  
mark on adapter/charger.  
2. Hold the battery flush against the  
adapter/charger and slide it in the  
direction of the arrow.  
1. Attach battery to adapter/charger.  
2. Press REFRESH. The REFRESH  
indicator lights and the battery  
begins discharging.  
3. Plug adapter/charger into nearest AC  
outlet (100-240V, 50/60Hz).  
3. When discharging is completed, the  
REFRESH indicator turns off, and  
the CHG indicator flashes. The  
battery now charges.  
4. If the battery is properly connected,  
the CHG indicator flashes.  
Note: If you try to charge a battery that  
has not been charged for a long period of  
time, it may take a few minutes for the  
CHG indicator to flash.  
4. After the battery is charged, the  
CHG (charge) indicator stops  
flashing and lights.  
5. After the battery is charged, the CHG  
indicator stops flashing and lights.  
5. Remove the battery from the  
adapter/charger.  
6. Remove the charged battery by sliding  
it off the adapter/charger.  
7. Attach the charged battery to the  
camcorder.  
14  
Power Your Camcorder  
Use the Battery to Power Your Camcorder (continued)  
Battery Level Indicator  
The battery level indicator appears in the  
viewfinder and shows you the amount of  
power in the rechargeable battery.  
• When the battery power is almost  
gone, flashes in the viewfinder.  
The camcorder turns off automatically  
after a few seconds. Set the POWER  
switch to OFF to turn off the cam-  
corder before replacing the battery.  
The battery level indicator is not recorded  
on the tape.  
• When  
appears, the battery is  
fully charged.  
• As the power is used  
appear.  
and  
Battery Care and Storage  
• Recharging takes approximately 70  
minutes for the FB1260 and 100  
minutes for the BB700 depending on  
the battery’s condition.  
• If the battery discharging must be  
stopped in the middle, remove the  
battery from the adapter/charger before  
unplugging it from the AC outlet.  
• Refreshing takes approximately 3-1/2  
hours for the FB1260 and 5-1/2 hours  
for the BB700 depending on the  
battery’s condition.  
• If the battery pack become too hot,  
remove it from the charger and let it  
cool down.  
• Let a hot battery cool down before  
attaching it to the AC adapter/charger.  
• After repeated charging and use,  
operation time gradually decreases.  
When operation time is too short to be  
useful, it is time to replace the battery.  
15  
Power Your Camcorder  
Optional Car Cord Adapter  
The optional DCC08 car cord shown on  
page 70 allows you to power your  
camcorder from the cigarette lighter  
socket of a car, truck, or RV. It converts  
12-volts to a 6-volt output.  
Note: Consult the installation and operating  
instructions enclosed with the DCC08 for  
complete operating instructions.  
Cautions: The DCC08 is designed to  
be used only with vehicles having  
negative ground electrical systems.  
Use only car cord adapter DCC08 with  
this camcorder. Use of any other car  
cord adapter might damage the  
camcorder and void your warranty.  
Use the DCC08 Car Cord Adapter  
Cigarette  
Lighter Socket  
Power  
Connector  
POWER  
Indicator  
VCR  
POWER  
OFF  
CAMERA  
Optional DCC08 Car  
Cord Adapter  
1. Set the POWER switch to OFF to turn  
off the camcorder. The power  
5. Insert the car cord’s cigarette lighter  
plug into the vehicle’s cigarette lighter  
socket. The power indicator on the car  
cord adapter lights.  
indicator on the camcorder turns off.  
2. If the battery or DC cable is attached  
to the camcorder, remove it.  
6. Set the POWER switch to CAMERA to  
turn on the camcorder. The power  
indicator on the camcorder lights.  
3. Hold the top of the power connector  
flush against the camcorder, and press  
the bottom of the power connector  
down until it locks into place.  
Caution: Make sure the camcorder’s  
power is turned off before removing  
the car cord’s plug from the cigarette  
lighter socket.  
4. Take the vehicle’s cigarette lighter out  
of the socket.  
16  
Date and Time Display  
Install the Clock Lithium Cell  
The clock cell indicator  
flashes for a few seconds in the viewfinder when  
you turn on the camcorder if the cell is not installed or needs replacing.  
Insert Object Here  
to Remove Cell  
Clock Cell  
(+ Side Facing Out)  
VCR  
POWER  
OFF  
CAMERA  
Clock Cell  
Compartment  
1. Make sure camcorder is turned off,  
and remove any power supply  
attached to the camcorder.  
4. Close the compartment cover.  
It clicks into place.  
To Remove Lithium Cell  
2. Press release tab of clock cell  
compartment cover and open the  
compartment.  
To remove battery, insert a pointed  
nonmetallic object between battery and  
compartment and lift.  
3. Insert the clock cell with the “+”  
terminal facing out, and press it in.  
Cautions: Lithium cell battery. Replace only with 3-volt lithium cell – such  
as CR2025. Use of other cell presents a risk of fire or explosion. Must be  
disposed of properly. Never handle punctured or leaking cell. May cause  
burns or personal injury.  
Keep out of the hands of children. Can cause death or injury if swallowed. If  
swallowed, consult a physician immediately for emergency treatment.  
The lithium cell used in this device may explode resulting in a fire or chemical  
burn if mistreated. Do not recharge, disassemble, heat above 212˚F (100˚C), or  
incinerate.  
Never use metallic tweezers to hold the cell, and never short the + and – sides  
of the cell.  
17  
Date and Time Display  
Set the Date and Time  
You must set the correct date and time before you can display and record it  
on your tapes. The clock cell must be installed as shown on the previous  
page before you can set the date.  
U I C K R E  
Q
T E / T I M E C O U N T E R  
A
D
S P / S L P  
MA  
N
P
S
AU  
T
O
TITLE  
ADE  
F
SEPIA  
W
1 / 1 0 0 0  
SHD  
MENU Dial  
(Rotate or Press In)  
MENU  
1. Set the POWER switch to CAMERA,  
and make sure the AE dial is not set to  
AUTO.  
MENU END  
AUTO  
AUTO  
JAN 1.98  
OFF  
FOCUS  
EXPOSURE  
DATE/TIME  
TELE MACRO  
TAPE LENGTH  
M.W.B.  
2. Press the MENU dial in to display the  
main MENU in the viewfinder.  
T30  
AUTO  
FAST  
ZOOM SPEED  
NEXT  
MENU  
MENU END  
AUTO  
AUTO  
JAN 1.98  
OFF  
FOCUS  
4. Press the MENU dial to display the  
EXPOSURE  
DATE/TIME  
TELE MACRO  
TAPE LENGTH  
M.W.B.  
ZOOM SPEED  
NEXT  
DATE/TIME menu.  
T30  
AUTO  
FAST  
DATE/TIME  
YEAR  
MONTH  
DAY  
1998  
JAN  
1
TIME  
PM 12:00  
3. Rotate the MENU dial to highlight  
DATE/TIME.  
EXIT  
5. Rotate the MENU dial to highlight  
YEAR. Press the MENU dial in.  
18  
Date and Time Display  
Set the Date and Time (continued)  
When YEAR starts flashing, rotate the  
MENU dial to select the year. When  
the correct year appears, press the  
MENU dial in to set the year.  
DATE/TIME  
YEAR  
MONTH  
DAY  
1998  
NOV  
18  
TIME  
AM 8:00  
6. Repeat step 5 to set the MONTH and  
DAY.  
7. Rotate the MENU dial to highlight  
EXIT  
TIME.  
11. Press the MENU dial in. The main  
MENU appears with MENU END  
highlighted.  
DATE/TIME  
YEAR  
MONTH  
DAY  
1998  
NOV  
18  
TIME  
PM 12:00  
MENU  
MENU END  
AUTO  
AUTO  
NOV 18.98  
OFF  
FOCUS  
EXPOSURE  
DATE/TIME  
TELE MACRO  
TAPE LENGTH  
M.W.B.  
ZOOM SPEED  
NEXT  
EXIT  
T30  
8. Press the MENU dial in. When the  
hour starts flashing, rotate the MENU  
dial to set the hour including AM  
or PM.  
AUTO  
FAST  
12. Press the MENU dial in again to  
remove the main MENU from the  
viewfinder.  
9. Press the MENU dial in. When the  
hour stops flashing and the minutes  
start flashing, rotate the MENU dial to  
set the minutes.  
10. Press the MENU dial in. When none  
of the settings are flashing, rotate the  
MENU dial to highlight EXIT.  
Notes:  
If you decide to return the date and time to the  
previous settings while the DATE/TIME menu  
is displayed, rotate the MENU dial to highlight  
EXIT, and press. Press the MENU dial again  
to remove the main MENU from the  
viewfinder.  
To display and record the date and/or time, see  
the following pages.  
19  
Date and Time Display  
Record the Date, Time, and Title Displays  
You must install the clock cell and set the date and time (as shown on the previous  
pages) before the you can select and record the correct date and time. You must  
create your title (as described on pages 46-47) before you can select and record it.  
DATE/TIME  
Button  
U I C K R E  
Q
T E / T I M E C O U N T E R  
A
D
S P / S L P  
MA  
N
P
S
AU  
T
O
TITLE  
AE Dial  
ADE  
F
SEPIA  
W
1 / 1 0 0 0  
SHD  
Select Date, Time, Date and Time, AUTO DATE, or Title You  
Created to Record On Your Tape  
1. Attach a power supply and set  
POWER switch to CAMERA. The  
power indicator lights.  
Date and Time Display: The  
date and time are displayed  
and recorded.  
AUTO DATE: The date is auto-  
matically recorded for approxi-  
mately five seconds and then AUTO  
DATE is displayed whenever:  
2. Make sure the AE dial is not set to  
AUTO to select any mode except  
AUTO DATE.  
Note: AUTO DATE is selected when the  
AE dial is set to AUTO.  
• The date has been set or  
changed.  
3. Repeatedly press the DATE/TIME  
button until the display you want to  
record appears in the viewfinder.  
• This display mode has just been  
selected.  
4. Select date, time, date and time,  
• The tape has been changed or the  
tape compartment opened.  
AUTO DATE, or the title you created.  
Date Display: The date is dis-  
Title: The title you have created is  
displayed and recorded. No display  
appears if a title has not been created.  
played and recorded.  
Time: The time is displayed and  
recorded.  
No Display: No display is dis-  
played or recorded.  
20  
Date and Time Display  
Record the Date, Time, and Title Displays (continued)  
Viewfinder Displays  
Repeatedly Press DATE/TIME  
NOV 18.98  
AM 10:25:00  
Time Display  
Date Display  
NOV 18.98 AM 10:25:00  
No Display  
Date and Time Display  
TAYLOR IS FOUR  
AUTO DATE  
Title You Created  
AUTO DATE Display  
To Record the Date, Time, Date and Time, AUTO DATE,  
or Title You Created  
1. Make sure the camcorder is in  
record-pause.  
4. Begin recording.  
5. To remove the display, press DATE/  
TIME until no display appears in the  
viewfinder.  
2. Make sure the AE dial is not set to  
AUTO unless you want to record  
AUTO DATE.  
Note: If you do not want to record a date or  
time, press DATE/TIME to select the date and  
time off mode before you begin recording.  
No display appears in the viewfinder.  
3. Repeatedly press DATE/TIME to  
display the date, time, date and time,  
AUTO DATE, or title you created.  
21  
Videocassettes  
Make sure you select good quality tapes for your camcorder. Use of poor quality tapes  
or tapes that have been damaged or mishandled can contaminate the video heads,  
resulting in a snowy picture or no picture at all during playback. Because there is no  
control over the type of tape purchased or rented by consumers, head cleaning is not  
covered under warranty. It is considered normal maintenance.  
The automatic head-cleaning system minimizes the need for accessory cleaners or  
cleaning by a Service Center. This system is activated whenever you insert or remove  
a cassette.  
Erase Protection – Safety Tab  
You can use your videocassettes over and over again. To erase a previous recording,  
just record over it.  
Safety  
Tab  
A. Remove  
safety tab or  
B. Cover hole  
with vinyl tape or  
slide tab to REC ON to  
record over tape.  
slide tab to  
REC OFF.  
Recording and Playback Speeds and Times  
The camcorder records and plays back in standard speed (SP) or extended play  
(SLP). Select the recording speed by pressing and holding the SP/SLP button.  
The selected speed is displayed in the viewfinder. Listed below are the  
maximum SP and SLP recording times for popular VHS-C cassettes.  
• SP – Standard play provides the  
best picture (less picture noise),  
but the shortest recording time (20  
minutes with a TC-20 tape).  
Recording Time  
Cassette  
TC-20  
TC-30  
TC-40  
SP  
SLP  
• SLP – Extended play provides  
three times the recording time as  
SP (60 minutes with a TC-20 tape).  
SLP has slightly more picture  
noise than SP in normal playback.  
This might not be noticeable.  
20 Min. 60 Min.  
30 Min. 90 Min.  
40 Min. 120 Min.  
22  
Videocassettes  
Insert and Remove Cassettes  
Caution: Insert  
the cassette  
only one way  
with the tape  
wheel facing up  
and the tape  
SP/SLP Button  
EJECT Button  
Tape Wheel  
window facing  
out. The  
cassette should  
slide easily into  
the holder. Do  
not force the  
cassette.  
Push Here to  
Close Cassette  
Compartment  
Tape Window  
Before inserting a cassette, turn the tape  
wheel on the side of the cassette in the  
direction shown to remove any slack in  
the tape.  
1. Press EJECT. The cassette holder  
opens automatically.  
2. Insert the cassette with the tape wheel  
facing up and tape window facing out.  
3. Press on the area labeled PUSH until  
Tape Wheel  
the cassette holder locks into place.  
Cassette Care and Storage  
• When you are finished with a cassette,  
rewind it, remove it from the  
camcorder, and label it.  
• Keep dust from entering the cassette  
compartment. All dust is abrasive and  
causes excessive wear on the tape and  
the camcorder’s recording or playback  
heads.  
• Store cassettes vertically in their  
protective cases at normal room  
temperatures. Do not leave your  
camcorder or cassettes in a car or  
outdoors for an extended period.  
Excessive heat or cold might damage  
your cassettes.  
• Do not use cassettes with damaged or  
spliced tape.  
• Do not use a cassette if it has been  
damaged or exposed to moisture. The  
tape might jam and/or damage your  
camcorder.  
• Keep the cassette away from strong  
magnetic fields such as electric motors  
and other devices.  
23  
Recording  
Time-Remaining Display  
The approximate time remaining on the tape in the camcorder for the tape  
speed you select is displayed. You must set the correct tape length in the  
TAPE LENGTH feature of the main MENU before the camcorder can  
correctly calculate time remaining.  
SP/SLP  
Button  
SP/SLP  
TE/TIME  
A
D
COUNTER R/M  
UICK REC  
Q
L
P
VCR  
M
A
AU  
N
T
O
O
N
T
L
R
F
I
G
SEPIA  
H
T
EJECT  
F
ADE  
TITLE  
B
A
C
K
L
H T  
I
G
P
H
H
A
Z
E
1
/ 1 0 0 0  
OFF  
AU  
T
O
ON  
L
I
G
H
T
MENU Dial  
(Rotate or Press In)  
Select a Tape Length  
4. Rotate the MENU dial to highlight  
1. Set the POWER switch to CAMERA,  
and make sure the AE dial is not set to  
AUTO.  
TAPE LENGTH.  
MENU  
2. Press the SP/SLP button to select a  
MENU END  
tape speed.  
AUTO  
AUTO  
NOV 18.98  
OFF  
FOCUS  
EXPOSURE  
DATE/TIME  
TELE MACRO  
TAPE LENGTH  
M.W.B.  
ZOOM SPEED  
NEXT  
3. Press the MENU dial in to display the  
main MENU in the viewfinder.  
T30  
AUTO  
FAST  
MENU  
MENU END  
AUTO  
AUTO  
NOV 18.98  
OFF  
FOCUS  
EXPOSURE  
DATE/TIME  
TELE MACRO  
TAPE LENGTH  
M.W.B.  
ZOOM SPEED  
NEXT  
T30  
AUTO  
FAST  
24  
Recording  
Time-Remaining Display (continued)  
30MIN  
30MIN  
SP  
T30  
Tape Length  
Indicator  
29MIN  
3MIN  
Tape Speed  
Indicator  
TAPE END  
2MIN  
(Flashing)  
Time-Remaining Display  
in Viewfinder  
1MIN  
(Flashing)  
0MIN  
(Flashing)  
5. Press the MENU dial to display the  
• Select T30 for a tape with 30  
TAPE LENGTH menu.  
minutes recording time in SP.  
• Select T40 for a tape with 40  
minutes recording time in SP.  
TAPE LENGTH  
T20  
T30  
T40  
7. Press the MENU dial twice to select  
the speed and remove the MENU.  
The time-remaining display starts  
flashing when the remaining tape  
time reaches two minutes.  
EXIT  
TAPE END appears when the tape reaches  
its end during recording or a cassette is  
loaded thats tape is already at its end.  
6. Rotate the MENU dial to highlight the  
type of tape you are using.  
• Select T20 for a tape with 20  
minutes or less recording time  
in SP.  
25  
Recording  
Recording Tips  
• Fading in and out of scenes makes  
your videos appear more professional.  
• Try to make sure indoor scenes are  
well-lit. This improves picture quality  
and color reproduction.  
• Learn to use the special production  
effects available with your camcorder  
to add variety to your recordings.  
• Do not move the camcorder rapidly  
from side-to-side while recording.  
A steady, gradual “pan” avoids  
blurring and “jitter”.  
• Be aware of video and audio back-  
grounds. Background details barely  
noticed while you are taping may  
show up as visual “clutter” on your  
recording. Background noises  
(especially TV sets, radios, household  
appliances, traffic sounds, etc.) might  
detract from the sound you want  
to record.  
• Use the viewfinder to make sure the  
camcorder is level while recording so  
that your scene isn’t “tilted”.  
• Do not bump or tap the camcorder’s  
microphone while recording because  
this sound is recorded.  
• Avoid long “still” shots of landmarks  
and scenic attractions. Recordings are  
more interesting if they include people  
and details. “Local color” gives travel  
videos lasting appeal. Consider  
• Include close-ups of individuals  
when taping family outings or  
group functions.  
recording a familiar or landmark scene  
from an unfamiliar vantage point.  
26  
Recording  
Use the Viewfinder to See What You Record  
The camcorder’s viewfinder is a miniature monitor that displays the  
picture seen by the camcorder when recording.  
Eyepiece Focus Control  
Cautions  
Viewfinder  
Do not force the viewfinder  
to rotate completely  
around. This will damage  
the viewfinder and/or the  
camcorder.  
When carrying the  
camcorder with the  
shoulder strap, put the  
viewfinder down and in to  
help prevent possible  
damage to the viewfinder  
from bumping against your  
body as you move.  
VCR  
POWER  
OFF  
CAMERA  
Adjust Viewfinder for Convenient Viewing  
For convenient viewing, slide the viewfinder out from the camcorder and  
rotate it up and down.  
Eyepiece Focus Control  
The eyepiece focus control lets you set  
the focus of the viewfinder for your  
vision. If you wear eyeglasses, you  
probably can operate the camcorder  
without them.  
screen displays. Look through the  
viewfinder and adjust the eyepiece focus  
control for your vision.  
The eyepiece focus control does not affect  
the focus of the picture actually recorded  
by the camcorder.  
It is easiest to set the correct focus by  
focusing on one of the viewfinder’s on-  
27  
Recording  
Viewfinder Displays  
REC  
AT  
SEPIA  
MWB  
PAUSE  
HAPPY BIRTHDAY  
NOV 18.98 PM 8:30:03  
AE Dial Special Effect Indicators  
BACK LIT  
This indicator appears when you  
AUTO (Full Auto Mode)  
select  
to make a subject appear  
AUTO LOCK appears briefly when  
you select AUTO.  
brighter that appears too dark because  
of background lighting.  
MAN (Manual Mode)  
1 S 1/1000  
AUTO RELEASE appears briefly  
This indicator appears when you  
select 1/1000 to record fast-moving  
action.  
when you select MAN.  
SPORTS  
This indicator appears when you  
HZ: HAZE  
select  
to record fast-moving  
This indicator appears when you  
select HAZE to soften the image and  
create a misty white look.  
action, such as sporting events.  
SEPIA  
This indicator appears when you  
SD:SHADOW  
select  
to give your recordings a  
brown-tone like old photographs.  
This indicator appears when you  
select SHDW to darken the picture  
and reduce glare.  
FRONT LIT  
This indicator appears when you  
select  
to darken a subject that  
appears too bright because of front  
lighting.  
28  
Recording  
Viewfinder Displays (continued)  
Battery Level Indicator (  
)
appears when you select  
This indicator shows the amount of  
:CLOUD to record outdoors on a  
power left in the rechargeable battery.  
cloudy day.  
This indicator flashes when the battery  
is almost empty.  
appears when you select  
:HALOGEN to record using  
Cassette Warning  
• The indicator flashes when the  
POWER switch is set to CAMERA and  
there is no cassette in the camcorder.  
halogen or tungsten lighting.  
MWB appears when you select MWB  
to adjust the color temperatures.  
• Details are on pages 38-39.  
• The  
indicator flashes when the  
POWER switch is set to CAMERA and  
the safety tab is set to REC OFF or  
removed from the cassette.  
Status Displays  
The REC indicator appears when the  
camcorder is recording.  
PAUSE  
Date, Time, Date and Time, AUTO  
DATE, or Title you Created  
The  
indicator appears  
during record-pause.  
Press the DATE/TIME button to display  
the date, time, date and time, AUTO  
DATE, or the title you created.  
appears when the camcorder plays  
back a tape.  
appears during play-pause.  
appears during fast forward.  
appears during rewind.  
• These displays are recorded when they  
are displayed. If you do not want to  
record one of them, press DATE/TIME  
until no display appears.  
(AT) Tracking Indicator  
Details are on pages 20-21.  
AT appears when the camcorder is  
adjusting tracking automatically.  
Preset Titles  
Press the TITLE button to display and  
record one of the eight preset titles or the  
title you created. Details are on page 46.  
Zoom Indicator ( )  
The zoom indicator appears here when  
you use the zoom lever.  
MWB (Manual White Balance  
Indicators)  
The indicator for the manual white  
balance selected in the MENU appears  
here.  
appears when you select  
:FINE  
to record outdoors on a sunny day.  
29  
Recording  
Viewfinder Displays (continued)  
T
30  
5MIN  
SP  
EFFECT  
M 0:00:00  
FADER  
BK  
+03  
BK  
LENS COVER  
TAPE END  
15S  
1S  
Fade Indicators ( EFFECT and  
FADER)  
The EFFECT and  
briefly appear when you press the FADE  
button to turn on fading. remains  
when fading is turned on. Press FADE  
Dew Warning (  
)
BK  
The dew indicator appears when exces-  
sive moisture (condensation) has entered  
the camcorder. The camcorder will not  
operate when this indicator appears.  
Place the camcorder in a warm, dry area  
until this indicator disappears.  
BK  
FADER indicators  
BK  
again to remove  
BK  
and turn off fading.  
Exposure Indicators (+03)  
Focus Indicators (  
)
This indicator appears when you are  
adjusting brightness manually using the  
EXPOSURE menu. Make sure the AE  
dial is not set to AUTO.  
These indicators appear when you are  
adjusting focus manually using the  
FOCUS menu. Make sure the AE dial is  
not set to AUTO.  
Details are on pages 40-41.  
• The focus indicators (  
) flash  
when the auto-focus system cannot  
operate properly.  
30  
Recording  
Viewfinder Displays (continued)  
appear when you have  
Time Counter (M0:00:00)  
selected MAN in the FOCUS menu.  
The time counter appears during  
and  
flash while you adjust  
and flash  
playback. It is not recorded.  
manual focus and  
when you cannot adjust the focus  
any farther.  
• An M” appears in front of the time  
counter when memory-stop is on.  
Details are on page 63.  
• Details are on pages 36-37.  
Lithium Cell (  
Time-Remaining Display (5MIN)  
)
The approximate time remaining on the  
tape is automatically displayed. The  
correct tape length must be set in the  
TAPE LENGTH feature of the  
main MENU.  
• This indicator appears for a few  
seconds when you turn on the cam-  
corder and the clock cell is missing or  
needs to be replaced.  
• Details are on page 17.  
• Details are on pages 24-25.  
Self-Timer, Animation, and Time-  
Warnings and Information  
Lapse Indicators (  
1S and  
15S)  
LENS COVER briefly flashes to remind  
• The interval time selected for self-  
timer or time-lapse recording (  
you to open the lens cover.  
15S,  
LENS COVER might flash when the  
camcorder is used in dark areas -- even  
if the lens cover is open.  
30S, 1MIN, or 5MIN) appears here.  
Details are on pages 48-49 and 52-53.  
• The recording time selected for  
animation or time-lapse recording  
• TAPE END appears when the end of  
the tape is reached during recording or  
a cassette is inserted with its tape  
already at the end.  
(
1/4S, 1/2S, 1S, or 5S)  
appears here.  
Details are on pages 50-51 and 52-53.  
Tape Length (T30)  
The tape length (T20, T30, or T40)  
selected in the main MENU appears here.  
• Details are on pages 24-25.  
Tape Speed Indicators (SP or SLP)  
The tape speed selected with the SP/SLP  
button appears here.  
Details are on pages 24-25.  
31  
Recording  
PLAY/PAUSE  
Button  
VCR  
Button  
VCR  
VCR  
Button  
STOP Button  
QUICK REC Button  
I C K R E  
U
Q
L
T E / T I M E C O U N T E R  
A
D
S P / S L P  
MA  
N
P
S
G
T
AU  
R
T
O
TITLE  
ADE  
B
F
SEPIA  
M
A
N
L
W
1 / 1 0 0 0  
SHD  
AU  
T
O
T
FADE  
TITLE  
SEPIA  
Tally Light  
I
K
W
SHD  
1 / 1 0 0 0  
H
AZE  
Microphone  
AE Dial  
Full Auto Mode  
• The camcorder automatically  
controls focus, exposure, and white  
balance.  
The AE dial lets you select automatic or  
manual control of several features.  
To Turn on the Full Auto Mode  
• The MENU dial will not operate.  
1. Set the POWER switch to CAMERA.  
The power indicator lights and the  
camcorder enters record-pause.  
AUTO DATE is selected for the  
date and time display.  
To Turn Off the Full Auto Mode  
PAUSE  
appears in the viewfinder.  
1. Set the AE dial to MAN.  
2. Set the AE dial to AUTO.  
3. Press the thumb trigger to start  
recording.  
32  
Recording  
Camera Edit Feature  
Quick Record Feature  
The camera edit feature allows you to  
position the tape when the camcorder is in  
record-pause. Set POWER switch to  
CAMERA.  
The quick record feature allows you to  
record for five seconds providing short  
scene transitions.  
1. Set POWER switch to CAMERA.  
• Press and hold VCR  
to visually search the recorded tape  
in reverse.  
2. Press QUICK REC to display  
5S in  
the viewfinder.  
3. Press the thumb trigger to start  
recording. The camcorder records for  
five seconds and enters record-pause.  
• Press and hold VCR  
to visually search forward on the  
recorded tape.  
To Turn Off the Quick Record Mode  
Release the button to return the cam-  
corder to record-pause at that point on  
the tape. Press the thumb trigger to start  
recording at this point.  
1. Press the QUICK REC button to  
remove  
5S from the viewfinder.  
Quick Review Feature  
Flying Erase Head  
Press and release VCR  
when the  
A separate erase head is mounted on  
the spinning headwheel (hence the term  
“flying”). This allows you to make clean  
edits without the “glitches” or “rainbow  
noise” that might occur at the beginning  
or the end of recordings.  
camcorder is in record-pause to review  
the last few seconds of a recording. The  
POWER switch must be set to CAMERA.  
The camcorder plays back the last few  
seconds of the recording, returns the tape  
to its previous position, and returns to  
record-pause.  
Auto Head Cleaner  
The camcorder has an automatic head-  
cleaning system. Whenever you insert or  
remove a cassette, this system  
is activated.  
Tally Light  
The tally light lights when the camcorder  
is recording. The tally light flashes during  
self-timer and time-lapse recording.  
The head-cleaning system minimizes the  
need for accessory cleaners or cleaning  
by a Service Center.  
The tally light must be set to ON in the  
TALLY LAMP menu. See page 54 for  
details.  
33  
Recording  
Zooming  
You can zoom in and out for close ups or wide-angle shots just by pressing the  
zoom buttons on the camcorder. The camcorder automatically focuses when  
you zoom at most distances.  
To record a close-up of a small subject closer than three feet. Turn on the TELE  
MACRO feature in the main MENU. You can record a small subject at a  
distance of approximately 23 inches.  
Zoom Buttons  
(T and W)  
U
I C K R E  
U
Q
T E / T I M E C O U N T E R  
A
D
S P / S L P  
MA  
N
P
S
AU  
T
O
TITLE  
ADE  
F
SEPIA  
MENU Dial  
(Rotate or Press In)  
W
1 / 1 0 0 0  
SHD  
Use the Zoom Buttons (W and T)  
Use the ZOOM SPEED Menu  
1. To zoom in or out, press one of the  
zoom buttons on the camcorder.  
Select ZOOM FAST or ZOOM SLOW  
using the menus.  
• To move the lens in the telephoto  
1. Make sure the POWER switch is set  
to CAMERA and the AE dial is not  
set to AUTO.  
(close-up) direction, press T.  
• To move the lens in the wide angle  
direction, press W.  
2. Press the MENU dial in to display  
the main MENU.  
• The zoom level indicator appears in  
the viewfinder during zooming.  
MENU  
MENU END  
AUTO  
AUTO  
NOV 18.98  
OFF  
FOCUS  
EXPOSURE  
DATE/TIME  
TELE MACRO  
TAPE LENGTH  
M.W.B.  
ZOOM SPEED  
NEXT  
T30  
AUTO  
FAST  
34  
Recording  
Zooming (continued)  
3. Rotate the MENU dial to highlight  
ZOOM SPEED.  
5. Rotate the MENU dial to highlight  
FAST or SLOW, and press the dial in.  
4. Press the MENU dial in to display the  
• Select FAST to zoom faster.  
ZOOM SPEED menu.  
• Select SLOW to zoom slower.  
6. Rotate the MENU dial to EXIT and  
press the MENU dial in twice to  
remove the MENUS.  
ZOOM SPEED  
FAST  
SLOW  
Notes: For fastest zooming, select FAST in  
the ZOOM SPEED menu and press the zoom  
button firmly.  
EXIT  
For slowest zooming, select SLOW in the  
ZOOM SPEED menu and press the zoom  
button lightly.  
To Turn Tele Macro Zooming ON or OFF  
1. Make sure the POWER switch is set to  
CAMERA and the AE dial is not set to  
AUTO.  
TELE MACRO  
OFF  
ON  
2. Press the MENU dial in to display the  
main MENU in the viewfinder.  
MENU  
EXIT  
MENU END  
AUTO  
AUTO  
NOV 18.98  
OFF  
FOCUS  
5. Rotate the MENU dial to highlight  
EXPOSURE  
DATE/TIME  
TELE MACRO  
TAPE LENGTH  
M.W.B.  
ZOOM SPEED  
NEXT  
ON or OFF and press the dial in.  
T30  
• Select ON if you want to record a  
small subject within approxi-  
mately 23 inches.  
AUTO  
FAST  
• Select OFF for normal zooming.  
3. Rotate the MENU dial to highlight  
6. Press the MENU dial twice to  
TELE MACRO.  
remove the MENU.  
4. Press the MENU dial in to display the  
TELE MACRO menu.  
35  
Recording  
Focusing  
The camcorder adjusts focus automatically under normal conditions.  
You might need to focus manually under certain conditions.  
Zoom Buttons  
(T and W)  
U I C K R E  
Q
T E / T I M E C O U N T E R  
A
D
S P / S L P  
MA  
N
P
S
AU  
T
O
TITLE  
ADE  
F
SEPIA  
W
1 / 1 0 0 0  
SHD  
MENU Dial  
(Rotate or Press In)  
Auto Focus  
Manual Focus  
During auto focus the camcorder  
focuses on the object located in the  
center area of the viewfinder.  
You might need to focus manually under  
certain conditions.  
1. Set the POWER switch to CAMERA, and  
• Set the AE dial to AUTO to turn on  
the auto focus feature. No focus  
indicator appears in the viewfinder.  
make sure the AE dial is not set to AUTO.  
2. Press zoom button T to zoom in on the  
subject and center the subject in the  
viewfinder.  
Notes: The low-contrast indicator  
(
) in the viewfinder indicates  
3. Press the MENU dial in to display the  
the auto-focus system might not  
operate correctly due to low illumina-  
tion, low or no contrast, repeated  
patterns, or two subjects at different  
distances overlapping.  
main MENU in the viewfinder.  
MENU  
MENU END  
AUTO  
AUTO  
NOV 18.98  
OFF  
FOCUS  
Use tele macro zooming when  
recording a subject close to the  
lens or the camcorder may  
zoom out to focus.  
EXPOSURE  
DATE/TIME  
TELE MACRO  
TAPE LENGTH  
M.W.B.  
ZOOM SPEED  
NEXT  
T30  
AUTO  
FAST  
The lens must be clean for the cam-  
corder to focus accurately.  
36  
Recording  
Focusing (continued)  
4. Press the MENU dial in to display the  
flashes while you are adjusting  
the focus and flashes when  
FOCUS menu.  
you cannot adjust the focus any  
more.  
FOCUS  
AUTO  
MANU  
• Rotate the MENU dial up to focus  
on a subject nearer.  
flashes  
while you are adjusting the focus  
and flashes when you cannot  
adjust the focus any more.  
EXIT  
7. Press the MENU dial twice to  
remove the menus.  
5. Rotate the MENU dial to highlight  
Notes: To return to auto focus, select  
AUTO in the FOCUS menu or set the AE  
dial to AUTO.  
MANU (manual) and press the dial  
in.  
appears in the  
viewfinder. The focus is locked at  
this point.  
6. Adjust the focus for a subject nearer  
or farther away.  
• Rotate the MENU dial up to focus  
on a subject farther away.  
Conditions Requiring Manual Focus  
• When recording two subjects at  
different distances that overlap in the  
same scene.  
• When recording a subject through a  
window.  
• When recording a subject having a  
close foreground and a background that  
is far away.  
• When the subject is not in the center of  
the scene.  
• When recording a scene with fast  
motions, like a tennis swing.  
• When recording in low-light situations.  
37  
Recording  
White Balance  
Making colors look natural is what white balance is all about. This is achieved by  
adjusting the way the camcorder “sees” and records the light source in the scene  
you record. Your camcorder is equipped with automatic white balance.  
You might want to adjust white balance manually under certain conditions, such as  
recording an object with various shades of the same color or when recording a  
predominantly red or brown object outdoors.  
Zoom Buttons  
(T and W)  
U
U I C K R E  
Y
Q
T E / T I M E C O U N T E R  
A
D
S P / S L P  
MA  
N
P
S
N
AU  
T
O
TITLE  
ADE  
F
SEPIA  
W
1 / 1 0 0 0  
SHD  
MENU Dial  
(Rotate or Press In)  
Auto White Balance  
Manual White Balance  
During auto white balance, the camcorder 1. Set the POWER switch to CAMERA,  
adjusts the white balance.  
and make sure the AE dial is not set to  
AUTO.  
• Set the AE dial to AUTO to turn on the  
automatic white balance feature. No  
indicator appears in the viewfinder.  
2. Press the MENU dial in to display the  
main MENU in the viewfinder.  
MENU  
MENU END  
AUTO  
AUTO  
NOV 18.98  
OFF  
FOCUS  
EXPOSURE  
DATE/TIME  
TELE MACRO  
TAPE LENGTH  
M.W.B.  
ZOOM SPEED  
NEXT  
T30  
AUTO  
FAST  
38  
Recording  
White Balance (continued)  
A.Point camcorder at a white, flat  
object such as a piece of white  
paper.  
3. Rotate the MENU dial to highlight  
M.W.B. and press the dial in to display  
the M.W.B. menu.  
B. While MWB is highlighted, press  
and hold the MENU dial until  
MWB starts flashing.  
M.W.B.  
AUTO  
:FINE  
:CLOUD  
:HALOGEN  
MWB  
The MWB indicator flashes  
while the camcorder is adjusting  
white balance and stops flashing  
when it is ready to record.  
EXIT  
Note: To change the tint for special  
recording, substitute colored paper for  
white. The white balance is  
4. Rotate the MENU dial to highlight the  
white balance you want to use.  
adjusted based on the color.  
• No indicator appears when you  
Red paper – deeper green  
Blue paper – orange  
select AUTO white balance.  
• Select  
:FINE when recording  
Yellow paper – deeper purple  
outdoors on a sunny day.  
5. Press the MENU dial twice to select a  
• Select  
:CLOUD when record-  
white balance and remove the menus.  
ing outdoors on a cloudy day.  
Notes: To return to auto white balance,  
select AUTO in the M.W.B. menu or set the  
AE dial to AUTO.  
• Select  
:HALOGEN when  
recording using halogen or tungsten  
lighting.  
• Select MWB when shooting  
subjects with different color  
temperatures and adjust the white  
balance as follows:  
M.W.B.  
AUTO  
:FINE  
:CLOUD  
:HALOGEN  
MWB  
EXIT  
Note: Connecting your camcorder to a  
color TV monitor may be helpful when  
making white balance adjustments.  
39  
Recording  
Exposure Control  
The camcorder controls the iris for you when the AE dial is set to AUTO.  
The camcorder adjusts brightness automatically under normal condi-  
tions. You might need to adjust brightness manually when the back-  
ground is too bright or too dark in comparison with the subject.  
U I C K R E  
Q
T E / T I M E C O U N T E R  
A
D
S P / S L P  
MA  
N
P
S
AU  
T
O
TITLE  
ADE  
F
SEPIA  
W
1 / 1 0 0 0  
SHD  
MENU Dial  
(Rotate or Press In)  
Auto Exposure  
Manual Exposure  
The camcorder adjusts the iris for  
the best possible picture during  
auto exposure.  
You may need to adjust exposure  
manually under certain conditions, such  
as those listed on the next page.  
• Set the AE dial to AUTO to turn on the  
auto exposure feature. No exposure  
indicator appears in the viewfinder.  
1. Set the POWER switch to CAMERA,  
and make sure the AE dial is not set  
to AUTO.  
40  
Recording  
Exposure Control (continued)  
2. Press the MENU dial in to display the  
The exposure indicator (00) appears in  
main MENU in the viewfinder.  
the viewfinder.  
5. Adjust the exposure for a dark or  
bright subject.  
MENU  
MENU END  
• To brighten the image, rotate the  
MENU dial up. You can adjust the  
exposure to +06.  
AUTO  
AUTO  
NOV 18.98  
OFF  
FOCUS  
EXPOSURE  
DATE/TIME  
TELE MACRO  
TAPE LENGTH  
M.W.B.  
ZOOM SPEED  
NEXT  
T30  
AUTO  
FAST  
• To darken the image, rotate the  
MENU dial down. You can adjust  
the exposure to –06.  
6. Press the MENU dial in to select an  
3. Rotate the MENU dial to highlight  
EXPOSURE and press the dial in to  
display the EXPOSURE menu.  
exposure.  
7. Press MENU again to remove the  
main MENU.  
EXPOSURE  
Notes: To return to auto exposure, select  
AUTO in the EXPOSURE menu or set the  
AE dial to AUTO.  
AUTO  
MANU  
EXIT  
4. Rotate the MENU dial to highlight  
MANU (manual) and press the dial in.  
Conditions Requiring Manual Exposure  
• When recording with a bright back-  
ground or reverse lighting.  
• When recording with a very dark  
background or very bright subject.  
• When recording a reflective natural  
background — such as a beach or  
when skiing.  
41  
Recording  
Fade In or Out  
You can add a professional touch to your recordings when you fade in and out  
of scenes. The picture gradually appears or disappears. The speed of the fade  
is controlled by the camcorder.  
S
U A  
I C K R E  
P /  
U
Q
Y
L
T E / T I M E C O U N T E R  
A
D
S P / S L P  
MA  
N
P
S
I
T
L
T
N
AU  
O
R
T
O
F
TITLE  
T
ADE  
F
SEPIA  
H
B
G
A
I
L
K
W
1 / 1 0 0 0  
SHD  
HAZE  
FADE  
Button  
To Fade In or Out  
1. Set POWER switch to CAMERA.  
You can activate fading during record-  
pause or recording.  
Notes: Press and hold the thumb trigger to  
record a black screen.  
The screen becomes slightly reddish if fade is  
used with the sepia feature.  
EFFECT  
If the haze feature is selected, fading is in and  
out from a white screen.  
FADER  
BK  
BK  
To Turn Off the Fade Feature  
2. Press the FADE button.  
appears briefly and then  
in the viewfinder.  
B
K
FADER  
remains  
Press the FADE button while  
in the viewfinder. OFF appears briefly  
when the fade feature is turned off.  
appears  
BK  
B
K
3. Press the thumb trigger to start or stop  
recording. The camcorder fades in or  
out of the scene.  
42  
Recording  
AE Dial  
The AE dial lets you select one of several different effects. Turn the dial to  
select the effect you want. The name and indicator for the effect appears briefly  
and then the indicator remains. There are no indicators for AUTO or MAN. Set  
the AE dial to MAN for normal recording.  
U
U I C K R E  
Q
T E / T I M E C O U N T E R  
A
D
S P / S L P  
MA  
N
P
H
G
T
AU  
AE Dial  
R
T
O
TITLE  
ADE  
B
F
SEPIA  
W
1 / 1 0 0 0  
SHD  
AU  
T
O
T
FADE  
TITLE  
SEPIA  
I
W
SHD  
1 / 1 0 0 0  
H
AZE  
Mode  
Name  
and Indicator  
Uses  
Places camcorder in full auto mode. Time and date displays,  
title, manual focus, manual exposure, and manual white  
balance will not operate.  
AUTO LOCK  
AUTO  
MAN  
Use this mode for recording using some of the manual  
features.  
AUTO RELEASE  
Use to capture fast-moving action with less blurring. Use  
when playing back a recording on a VCR featuring special  
effects, such as pause or slow motion.  
SPORTS  
Use when subjects are in front of a window or have the sun  
to their back. Compensates for subjects appearing too dark  
because of backlighting.  
BACK LIT  
Use when there is a strong front light on the subject such as  
spotlights. Compensates for subjects appearing too light  
because of strong front lighting.  
FRONT LIT  
Sets shutter speed to 1/1000. Use to record faster moving  
action than sports mode with less blurring. Use when  
playing back a recording on a VCR featuring special effects,  
such as pause or slow motion.  
1 S 1/1000  
HZ:HAZE  
1/1000  
Use to soften the image and give the picture a misty white  
effect.  
HAZE  
SHDW  
SEPIA  
Use to counter effects of glare and darken the picture with a  
black mist.  
Picture is recorded in sepia (brownish red) and offers the  
vintage look of old movies.  
SD:SHADOW  
SEPIA  
43  
Recording  
Front Light and Back Light  
The camcorder adjusts the light automatically under normal conditions. You  
might need to adjust for a strong front light or back light (such as spotlights  
or subjects standing in front of a window with the sun at their backs). You  
can adjust for a strong front or back light using the AE dial, FRONTLIGHT  
button, or BACKLIGHT button.  
U I C K R E  
L
Q
T E / T I M E C O U N T E R  
A
D
S P / S L P  
MA  
FRONTLIGHT Button  
N
P
S
G
AU  
R
T
O
TITLE  
ADE  
B
F
SEPIA  
W
1 / 1 0 0 0  
SHD  
AU  
T
O
T
FADE  
TITLE  
SEPIA  
AE Dial  
I
W
SHD  
1 / 1 0 0 0  
BACKLIGHT Button  
To Use the AE Dial  
To compensate for a strong front light,  
press and hold the FRONTLIGHT  
To compensate for a strong front light,  
place the AE dial in front light ( ).  
FRONT LIT appears briefly and then  
remains in the viewfinder.  
button.  
and the exposure indicator  
(-02) appear in the viewfinder.  
Note: The exposure indicator shows a  
setting two steps lower (up to -06) than the  
current exposure setting.  
To compensate for a strong back light  
place the AE dial in back light ( ).  
BACK LIT appears briefly and then  
remains in the viewfinder.  
To compensate for a strong back light,  
press and hold the BACKLIGHT  
Set the AE dial to AUTO to turn off the  
front or back light feature.  
button.  
and the exposure indicator  
(+02) appear in the viewfinder.  
Note: The exposure indicator shows a  
setting two steps higher (up to +06) than  
the current exposure setting.  
To Use the FRONTLIGHT or  
BACKLIGHT Button  
Release the button to turn off manual  
front or back light.  
You may want to temporarily adjust for a  
strong front or back light using the  
FRONTLIGHT or BACKLIGHT button.  
44  
Recording  
Travel Tips  
• Write down your camcorder’s serial  
number and keep it separate from the  
camcorder when traveling. If your  
camcorder is lost or stolen, you will be  
able to identify it.  
• Make sure you have any plug adapters  
that you might need before taking your  
camcorder to other countries. Consult  
your dealer for advice.  
• Carry your camcorder in a carrying  
case when traveling. See page 70 for  
a case designed especially for this  
camcorder. An ordinary suitcase or  
carry bag does not offer the protection  
your camcorder needs. Treat your  
camcorder as carry-on luggage to  
protect it from rough handling.  
• Use extra care to avoid damage to your  
camcorder and accessories when  
operating them at a beach or pool.  
Spray, sand, and dust should be  
avoided. If your lens has been exposed  
to the elements, clean it only with  
proper lens cleaning supplies.  
45  
Recording  
Titles — Recording  
The title feature lets you choose one of eight preset titles or create your own  
title — up to 18 characters. You must install the clock cell battery as shown on  
page 17 before you can create or store your own title.  
DATE/TIME Button  
I C K R E  
U
Q
T E / T I M E C O U N T E R  
A
D
S P / S L P  
MA  
N
P
S
AU  
T
O
TITLE  
ADE  
F
SEPIA  
TITLE Button  
W
1 / 1 0 0 0  
SHD  
MENU Dial  
(Rotate or Press In)  
Record a Preset Title or Title You Create  
1. Make sure the camcorder is in record-  
pause and the AE dial is not set to  
AUTO.  
SOMEONE SPECIAL  
VACATION  
SUPER STAR  
FIRST  
2. Repeatedly press TITLE to select one  
of the preset titles or the title you  
created.  
Title you Created  
Title Off – No Title  
3. Start recording. The title is  
superimposed and recorded on your  
tape whenever it appears.  
4. Press TITLE to remove the title from  
the viewfinder when you are finished  
recording it.  
HAPPY BIRTHDAY  
HAPPY HOLIDAYS  
CONGRATULATIONS  
OUR FAMILY  
46  
Recording  
Create Your Own Title  
1. Make sure the camcorder is in record-  
pause and the AE dial is not set  
to AUTO.  
where you want the character to  
appear.  
6. When the box is highlighted, rotate  
the MENU dial to select a character.  
Press the MENU dial in to place the  
character in your title.  
2. Press the MENU dial in to display the  
main MENU in the viewfinder.  
MENU  
7. Repeat steps 5 and 6 until you  
complete your title.  
MENU END  
AUTO  
AUTO  
NOV 18.98  
OFF  
FOCUS  
Note: To erase a previous title, rotate the  
MENU dial to highlight CLEAR, and press  
the MENU dial in to erase the title.  
EXPOSURE  
DATE/TIME  
TELE MACRO  
TAPE LENGTH  
M.W.B.  
ZOOM SPEED  
NEXT  
T30  
AUTO  
FAST  
To change or delete a character, highlight  
BACK or NEXT and press the MENU dial  
in to highlight the character you want to  
change. Rotate the MENU dial to select  
the new character (or blank space) and  
press the MENU dial in to select the new  
character.  
3. Rotate the MENU dial to highlight  
NEXT. The second MENU will  
appear. Keep rotating the MENU dial  
to highlight CHARACTER.  
CHARACTER  
A
K
B
L
C
M
W
I
3
D
N
X
E
O
Y
F
P
Z
G
Q
H
R
I
J
S
˙˙ ˙˙ ˙˙  
BACK  
T U  
V
A
O
U
`
:
0
`
`
`
`
OFF  
OFF  
ON  
REC TIME  
A E  
O
U
Ñ Æ Ø  
/
5
Å
¿
8
&
9
.
1
,
-
!
6
?
7
INT. TIME  
2
4
TALLY LAMP  
CHARACTER  
JLIP ID NO.  
DEMO MODE  
T A Y L O R I S FOUR !  
BACK NEXT EXIT CLEAR  
07  
OFF  
8. When you are finished, rotate the  
MENU dial to highlight EXIT and  
press the MENU dial in twice to  
remove the menu.  
MENU END  
4. Press the MENU dial in to display the  
CHARACTER menu.  
To record your title, press the TITLE  
button until your title is displayed as  
described on the previous page. To  
record your title and a preset title,  
display the preset title and press DATE/  
TIME to display your title as described  
on pages 20-21.  
CHARACTER  
A
K
B
L
C
M
W
I
3
D
E
F
G
Q
H
R
I
J
N O P  
S
˙˙ ˙˙ ˙˙  
T U  
V
X
Y
Z
A
O
U
`
:
0
`
`
`
`
A E  
O
U
Ñ Æ Ø  
/
5
Å
¿
8
&
9
.
1
,
-
!
6
?
7
2
4
BACK NEXT  
EXIT CLEAR  
To Stop Recording Your Title  
Press the DATE/TIME button and/or  
TITLE button to remove the title from the  
viewfinder.  
5. Rotate the MENU dial to highlight  
BACK or NEXT. Repeatedly press the  
MENU dial in to highlight the box  
47  
Recording  
Self-Timer Recording  
You can set the self-timer to delay recording so you can be in the scene  
when recording begins.  
U I C K R E  
Q
T E / T I M E C O U N T E R  
A
D
S P / S L P  
MA  
N
P
S
AU  
T
O
TITLE  
ADE  
F
SEPIA  
W
1 / 1 0 0 0  
SHD  
MENU Dial  
(Rotate or Press In)  
Tally  
Light  
To Set the Self Timer  
1. Make sure the camcorder is in record-  
pause and the AE dial is not set  
to AUTO.  
MENU  
MENU END  
FOCUS  
EXPOSURE  
DATE/TIME  
TELE MACRO  
TAPE LENGTH  
M.W.B.  
AUTO  
AUTO  
NOV 18.98  
OFF  
2. Press the MENU dial in to display the  
main MENU in the viewfinder.  
T30  
AUTO  
FAST  
ZOOM SPEED  
NEXT  
48  
Recording  
Self-Timer Recording (continued)  
3. Rotate the MENU dial to highlight  
NEXT. The second MENU appears.  
Keep rotating the MENU dial to  
highlight INT. TIME.  
6. Press the MENU dial twice to exit the  
menu.  
7.  
and the amount of delayed  
recording time appear in the  
viewfinder.  
BACK  
REC TIME  
OFF  
OFF  
ON  
INT. TIME  
TALLY LAMP  
CHARACTER  
JLIP ID NO.  
DEMO MODE  
07  
OFF  
15S  
MENU END  
4. Press the MENU dial in to display the  
INT. TIME menu.  
8. Press the thumb trigger to start  
recording.  
INT. TIME  
Note: The tally light flashes. About five  
seconds before recording begins, the tally  
light starts flashing faster. When the  
camcorder starts recording, the tally light  
stops flashing.  
OFF  
15 S  
30 S  
1 MIN  
5 MIN  
9. To stop self-timer recording, press the  
thumb trigger.  
EXIT  
Note: To turn off self-timer recording  
before it starts, press the thumb trigger  
and set the interval time on the INT. TIME  
menu to OFF.  
5. Rotate the MENU dial to highlight  
the desired time (15S, 30S, 1 MIN,  
or 5 MIN).  
• Select 15S to delay the recording  
for 15 seconds.  
• Select 30S to delay the recording  
for 30 seconds.  
• Select 1MIN to delay the recording  
for one minute.  
• Select 5MIN to delay the recording  
for five minutes.  
• Select OFF if you do not want the  
camcorder to delay recording.  
49  
Recording  
Animation Recording  
You can produce an illusion of movement for an otherwise stationary scene  
or object by shooting a series of pictures of slightly different poses (such as  
cartooning).  
SP/SLP  
Button  
U I C K R E  
Q
T E / T I M E C O U N T E R  
A
D
S P / S L P  
MA  
N
P
S
AU  
T
O
TITLE  
ADE  
F
SEPIA  
W
1 / 1 0 0 0  
SHD  
MENU Dial  
(Rotate or Press In)  
Tally  
Light  
To Record Using Animation  
1. Make sure the camcorder is in record-  
pause and the AE dial is not set  
to AUTO.  
3. Press the MENU dial in to display the  
main MENU in the viewfinder.  
MENU  
2. Press and hold SP/SLP to select SP.  
SP appears in the viewfinder.  
MENU END  
AUTO  
AUTO  
NOV 18.98  
OFF  
FOCUS  
EXPOSURE  
DATE/TIME  
TELE MACRO  
TAPE LENGTH  
M.W.B.  
ZOOM SPEED  
NEXT  
T30  
AUTO  
FAST  
50  
Recording  
Animation Recording (continued)  
4. Rotate the MENU dial to highlight  
NEXT. The second MENU appears.  
Keep rotating the MENU dial to  
highlight REC TIME.  
• Select OFF if you do not want to  
record for a selected amount of  
time.  
7. Press the MENU dial twice to exit the  
menu.  
8.  
and the amount of recording  
time appear in the viewfinder.  
BACK  
OFF  
OFF  
ON  
REC TIME  
INT. TIME  
TALLY LAMP  
CHARACTER  
JLIP ID NO.  
DEMO MODE  
07  
OFF  
MENU END  
5. Press the MENU dial in to display the  
5S  
REC TIME menu.  
REC TIME  
9. Press the thumb trigger to start  
recording.  
OFF  
1/4 S  
1/2 S  
1 S  
Note: The recording stops automatically  
after the selected period of recording  
time. You might want to take two to five  
shots of the subject in the same position.  
5 S  
EXIT  
10. Move the subject and repeat step 9  
for the desired number of shots.  
6. Rotate the MENU dial to highlight  
the amount of time you want the  
camcorder to record.  
11. To stop animation recording, set  
the time in the REC TIME menu  
to OFF.  
• Select 1/4S to record for 1/4  
second.  
• Select 1/2S to record for 1/2  
second.  
• Select 1S to record for one second.  
• Select 5S to record for five seconds.  
51  
Recording  
Time-Lapse Recording  
You can make automatic recordings at preset time intervals. The recording  
shows subtle changes (such as shifts in cloud formations or plant growth)  
when it remains focused on an object.  
SP/SLP  
Button  
U I C K R E  
Q
T E / T I M E C O U N T E R  
A
D
S P / S L P  
MA  
N
P
S
AU  
T
O
TITLE  
ADE  
F
SEPIA  
W
MENU Dial  
(Rotate or  
Press In)  
1 / 1 0 0 0  
SHD  
Tally  
Light  
To Record Using Time Lapse  
1. Make sure the camcorder is in record-  
pause and the AE dial is not set  
to AUTO.  
Keep rotating the MENU dial to  
highlight INT. TIME.  
2. Press and hold SP/SLP to select SP.  
BACK  
SP appears in the viewfinder.  
REC TIME  
OFF  
OFF  
ON  
INT. TIME  
TALLY LAMP  
CHARACTER  
JLIP ID NO.  
DEMO MODE  
3. Press the MENU dial in to display the  
main MENU in the viewfinder.  
07  
OFF  
MENU  
MENU END  
MENU END  
AUTO  
AUTO  
NOV 18.98  
OFF  
FOCUS  
EXPOSURE  
DATE/TIME  
TELE MACRO  
TAPE LENGTH  
M.W.B.  
ZOOM SPEED  
NEXT  
5. Press the MENU dial in to display the  
INT. TIME menu.  
T30  
AUTO  
FAST  
INT. TIME  
OFF  
15 S  
4. Rotate the MENU dial to highlight  
30 S  
1 MIN  
5 MIN  
NEXT. The second MENU appears.  
EXIT  
52  
Recording  
Time-Lapse Recording (continued)  
• Select 1/4S to record for 1/4  
6. Rotate the MENU dial to highlight  
the desired time between recordings  
(15S, 30S, 1 MIN, or 5 MIN).  
second.  
• Select 1/2S to record for 1/2  
second.  
• Select 15S to delay the recording  
for 15 seconds.  
• Select 1S to record for one  
second.  
• Select 30S to delay the recording  
for 30 seconds.  
• Select 5S to record for five  
seconds.  
• Select 1MIN to delay the recording  
for one minute.  
• Select OFF if you do not want  
to record for a selected amount  
of time.  
• Select 5MIN to delay the recording  
for five minutes.  
• Select OFF if you do not want the  
10. Press the MENU dial twice to exit the  
camcorder to delay recording.  
menus.  
7. Press the MENU dial in to display the  
second MENU. Rotate the MENU  
dial to highlight REC TIME.  
and the amount of recording time  
and  
and the amount of interval  
time between recordings appear in  
the viewfinder.  
BACK  
OFF  
OFF  
ON  
REC TIME  
INT. TIME  
TALLY LAMP  
CHARACTER  
JLIP ID NO.  
DEMO MODE  
07  
OFF  
15S  
5S  
MENU END  
8. Press the MENU dial in to display the  
11. Press the thumb trigger to start  
recording.  
REC TIME menu.  
Note: The camcorder starts and stops  
recording the selected amount of time.  
The tally light flashes with the flash  
speed increasing five seconds before  
recording begins.  
REC TIME  
OFF  
1/4 S  
1/2 S  
1 S  
5 S  
12. To stop recording, place the  
camcorder in record-pause, and set the  
REC TIME and INT. TIME in the  
second MENU to OFF.  
Note: Fade does not operate during animation  
or time-lapse recording.  
EXIT  
9. Rotate the MENU dial to highlight  
the amount of time you want the  
camcorder to record.  
53  
Recording  
Tally Light (Turn On or Off)  
You can turn the tally light on or off using the second MENU.  
U I C K R E  
Q
T E / T I M E C O U N T E R  
A
D
S P / S L P  
MA  
N
P
H
AU  
T
O
TITLE  
MENU Dial  
(Rotate or  
Press In)  
ADE  
F
SEPIA  
Tally Light  
W
1 / 1 0 0 0  
SHD  
To Turn the Tally Light On or Off  
1. Make sure the camcorder is in record-  
pause and the AE dial is not set  
to AUTO.  
4. Press the MENU dial in to display the  
TALLY LAMP menu.  
TALLY LAMP  
2. Press the MENU dial in to display the  
ON  
OFF  
main MENU in the viewfinder.  
MENU  
MENU END  
AUTO  
AUTO  
NOV 18.98  
OFF  
FOCUS  
EXPOSURE  
DATE/TIME  
TELE MACRO  
TAPE LENGTH  
M.W.B.  
ZOOM SPEED  
NEXT  
EXIT  
T30  
AUTO  
FAST  
5. Rotate the MENU dial to highlight  
OFF or ON. Press the MENU dial in  
to select ON or OFF.  
3. Rotate the MENU dial to highlight  
NEXT. The second MENU will  
appear. Keep rotating the MENU dial  
to highlight TALLY LAMP.  
• Select ON if you want the tally  
light to light during recording.  
• Select OFF if you do not want the  
tally light to light during recording.  
6. Rotate the MENU dial to highlight  
EXIT and press the dial in twice to  
remove the menus.  
BACK  
OFF  
OFF  
ON  
REC TIME  
INT. TIME  
TALLY LAMP  
CHARACTER  
JLIP ID NO.  
DEMO MODE  
07  
OFF  
MENU END  
54  
Recording  
Demo Mode  
You can turn on the DEMO mode in the second MENU to have a demonstration  
of some of the camcorder’s features.  
I C K R E  
U
Y
Q
T E / T I M E C O U N T E R  
A
D
S P / S L P  
MA  
MENU Dial  
(Rotate or  
Press In)  
N
P
H
AU  
T
O
TITLE  
ADE  
F
SEPIA  
W
1 / 1 0 0 0  
SHD  
To Turn the Demo Mode On  
1. Make sure the camcorder is in record-  
pause and the AE dial is not set  
to AUTO.  
5. Press the MENU dial in to display the  
DEMO MODE menu.  
DEMO  
2. If a cassette is inserted, remove the  
OFF  
ON  
safety tab or set it to REC OFF.  
3. Press the MENU dial in to display the  
main MENU in the viewfinder.  
MENU  
EXIT  
MENU END  
AUTO  
AUTO  
NOV 18.98  
OFF  
FOCUS  
EXPOSURE  
DATE/TIME  
TELE MACRO  
TAPE LENGTH  
M.W.B.  
ZOOM SPEED  
NEXT  
6. Rotate the MENU dial to highlight  
OFF or ON. Press the MENU dial in  
to select ON or OFF.  
T30  
AUTO  
FAST  
• Select ON if you want the cam-  
corder to demonstrate some of the  
recording features.  
Note: Zoom is the only feature that  
operates during the demo mode.  
4. Rotate the MENU dial to highlight  
NEXT. The second MENU appears.  
Keep rotating the MENU dial to  
highlight DEMO MODE.  
• Select OFF if you do not want a  
demonstration.  
7. Rotate the MENU dial to highlight  
EXIT and press the dial in twice to  
remove the menus.  
BACK  
OFF  
OFF  
ON  
REC TIME  
INT. TIME  
TALLY LAMP  
CHARACTER  
JLIP ID NO.  
DEMO MODE  
To Turn the Demo Mode Off  
Turn off the camcorder.  
07  
OFF  
MENU END  
55  
Recording  
JLIP (Joint Level Interface Protocol) Identification  
Number  
You can connect a device, such as a home computer, to the JLIP  
connector on the camcorder.  
MENU Dial  
(Rotate or  
Press In)  
VCR  
POWER  
OFF  
CAMERA  
JLIP Connector  
(Under Cover)  
To Select a JLIP ID NO.  
1. Make sure the camcorder is in record-  
pause and the AE dial is not set  
to AUTO.  
4. Press the MENU dial in to display the  
JLIP ID NO. menu.  
JLIP ID NO.  
ID NO. 84  
2. Press the MENU dial in to display the  
main MENU in the viewfinder.  
MENU  
MENU END  
AUTO  
AUTO  
NOV 18.98  
OFF  
FOCUS  
EXPOSURE  
DATE/TIME  
TELE MACRO  
TAPE LENGTH  
M.W.B.  
ZOOM SPEED  
NEXT  
EXIT  
T30  
5. Press the MENU dial in to start the ID  
NO. (numbers) flashing. Rotate the  
MENU dial to select a number from  
01 to 99. Press the MENU dial in to  
select a JLIP number.  
AUTO  
FAST  
3. Rotate the MENU dial to highlight  
NEXT. The second MENU will  
appear. Keep rotating the MENU dial  
to highlight JLIP ID NO.  
Use the number you select to identify  
your camcorder if you connect it to a  
computer using the JLIP connector.  
6. Rotate the MENU dial to highlight  
EXIT and press the dial in twice to  
remove the menus.  
BACK  
OFF  
OFF  
ON  
REC TIME  
INT. TIME  
TALLY LAMP  
CHARACTER  
JLIP ID NO.  
DEMO MODE  
07  
OFF  
MENU END  
56  
Recording  
Attach the Shoulder Strap  
The camcorder’s shoulder strap is designed to let you carry the camcorder from  
your shoulder and – when you are ready to shoot – bring the camcorder to shooting  
position in one quick movement.  
To Attach the Shoulder Strap  
1. If the strap keeper  
is over a double  
section of the  
4. Attach the other end of the strap to the  
other shoulder strap attachment ring.  
strap, slide the  
strap keeper off the  
end of the strap.  
Replace the keeper  
on the strap  
between the buckle  
and the end of the  
strap as shown.  
Keeper  
5. Adjust the shoulder strap to the  
desired length.  
2. Loop the end of the strap over the top  
of the shoulder strap attachment ring.  
6. Slide both keepers up snugly against  
the shoulder strap attachment rings to  
prevent the strap from slipping.  
Keeper  
Buckle  
Cautions: When carrying the  
camcorder with the shoulder strap,  
you may find it convenient to rotate  
the viewfinder down and slide it to  
the front. This helps prevent possible  
damage to the viewfinder from  
bumping against your body as you  
move.  
Attachment  
Rings  
3. Thread the end of the strap back  
through the keeper and buckle  
making sure it is threaded under the  
outer strap. Make sure the strap is  
not twisted.  
Make sure the shoulder strap is  
firmly attached before using it  
to carry the camcorder.  
57  
Recording  
Model CC6271 Only: Built-In Color Enhancement Light  
Model CC6271’s built-in color enhancement light automatically adds more  
light when needed. The POWER switch must be set to CAMERA to operate  
the video light.  
SP/SLP  
TE/TIME  
A
D
COUNTER R/M  
ICK REC  
U
Q
L
P
VCR  
Video Light  
M
A
AU  
N
T
O
O
N
T
L
R
F
I
G
SEPIA  
H
T
EJECT  
F
A
D
E
T
I
T
L
E
B
A
C
K
L
H T  
P
U I C K R E  
I
G
Q
T E / T I M E C O U N T E R  
A
D
S P / S L P  
H
A
Z
E
1
/ 1 0 0 0  
OFF  
AU  
TO  
ON  
L
I
G
H
T
MA  
N
P
H
AU  
T
O
TITLE  
ADE  
F
SEPIA  
W
1 / 1 0 0 0  
SHD  
LIGHT OFF•AUTO•ON  
Switch  
To Use the Light  
Note: When the light is turned on, the  
Set the LIGHT OFF•AUTO•ON switch.  
camcorder may turn off if the battery’s power  
is low even though the battery level indicator  
is not flashing.  
Set to ON to turn the light on.  
Note: We recommend you set white  
balance to :HALOGEN in the M.W.B.  
menu when using the light.  
Cautions:  
Set to AUTO to have the light come on  
automatically when the camcorder  
senses there is insufficient light for the  
best recording.  
Do not operate the video light closer  
than one foot to people or other objects.  
The video light becomes very hot. Do  
not touch it during operating or right  
after using it. Serious injury may result.  
Notes: If the lighting condition is unstable  
the light might turn on and off. Set the  
light to ON or OFF.  
Do not place the camcorder in a  
The light might stay on when using high  
shutter speeds.  
carrying case right after using the light.  
Never operate the video light close to  
flammable or explosive material.  
Set to OFF to turn the light off. Turn  
the light off when you are not  
recording to save battery power.  
58  
Recording  
Model CC6271 Only: Built-In Color Enhancement Light (continued)  
Replace the Bulb Assembly  
Carefully follow the instructions below.  
Cautions  
The video light and bulb need to cool for approximately 30 minutes after  
the camcorder has been used before the bulb assembly is replaced.  
Do not touch the light bulb with your fingers. If the bulb is accidentally  
touched, wipe it with a soft cloth. A dirty bulb may cause smoke and have  
a reduced service life.  
To Replace the Bulb Assembly  
3. Place the new bulb assembly into the  
camcorder by inserting the top first  
and then slide the assembly into  
place.  
1. Insert a flat nonmetallic object (such  
as a plastic screwdriver) in the hole.  
Bulb Assembly  
Plastic  
Screwdriver  
S
U A  
I
C
K
R
E
P /  
Y L  
U A  
U
P /  
Q
U
I
C
K
R
E
Y L  
Q
A
T
E / T I M E C  
O U N T E R  
A
D
T
E / T I M E C  
O U N T E R  
A
D
S
P / S L P  
S
P / S L P  
MA  
MA  
N
N
P
H
P
H
I
T
T
L
T
N
I
T
T
L
T
AU  
N
O
R
AU  
O
T
T
R
O
F
O
F
T
T
I
LE  
T
T
I
LE  
A
D
E
F
A
D
E
F
S
E
P
I
A
S
E
P
I
A
H
B
H
I
G
B
A
L
G
K
A
I
K
L
W
W
1 / 1 0 0 0  
1 / 1 0 0 0  
S
H
D
S
H
D
H
AZE  
H
AZE  
2. Pull on the sides of the bulb  
assembly and remove it from the  
camcorder as shown.  
S
U A  
P /  
U
I
C
K
R
E
Y L  
Q
A
T
E / T I M E C  
O U N T E R  
A
D
S P / S L P  
MA  
N
P
H
I
T
T
L
T
N
O
AU  
T
R
O
F
T
T
I
LE  
A
D
E
F
S
E
P
I
A
H
B
G
A
I
K
L
W
1 / 1 0 0 0  
S
H
D
H
AZE  
59  
Playback  
Use the Viewfinder for Playback  
You can see tapes using the viewfinder. There is no sound during  
viewfinder playback.  
P
P
PLAY/PAUSE  
Button  
VCR  
VCR  
Button  
VCR  
Button  
STOP Button  
Eyepiece Focus  
Control  
U
I C K R E  
U
L
Q
T E / T I M E C O U N T E R  
A
D
S P / S L P  
Viewfinder  
MA  
N
P
S
T
N
AU  
T
O
TITLE  
T
ADE  
F
SEPIA  
H
B
A
K
W
1 / 1 0 0 0  
SHD  
EJECT  
Switch  
PUSH Button  
To Play Back a Tape  
1. Attach a power supply.  
• Insert the cassette with the tape  
wheel facing up and the tape  
window facing out.  
Attach the adapter/charger, charged  
battery, or optional car cord.  
• Press on the PUSH button to lock  
2. Insert a tape.  
the cassette compartment closed.  
• Slide EJECT up to open the cassette  
compartment.  
3. Set the POWER switch to VCR.  
• Turn the tape wheel on the cassette  
to remove any slack from the tape.  
The power indicator lights.  
4. Adjust the viewfinder for a  
comfortable viewing position.  
60  
Playback  
Use the Viewfinder for Playback (continued)  
• Turn the eyepiece focus control to  
adjust the focus of the viewfinder  
for your vision.  
• During playback, use the playback  
features on the following pages.  
6. Press the STOP button when you  
5. Press the PLAY/PAUSE button to  
are finished.  
begin playback.  
• If necessary, adjust tracking.  
Tracking  
U I C K R E  
Q
T E / T I M E C O U N T E R  
A
D
S P / S L P  
MA  
MENU Dial  
(Used for Tracking  
During Playback)  
N
P
H
AU  
T
O
TITLE  
ADE  
F
SEPIA  
W
1 / 1 0 0 0  
SHD  
(picture bouncing up and down). Some  
“jitter” is normal.  
During playback, streaks may appear in  
the playback picture. Press the MENU  
dial in to activate manual tracking. Rotate  
it up or down to move the streaks up or  
down and out of the picture.  
Press the MENU dial in again to turn  
automatic tracking back on. AT flashes in  
the viewfinder during automatic tracking.  
• During stop-action playback, rotating  
the MENU dial while in manual  
Note: The tracking buttons might have no  
effect on tapes recorded on other camcorders  
or VCRs.  
tracking might reduce picture “jitter”  
61  
Playback  
Playback Features  
P
P
PLAY/PAUSE Button  
VCR  
VCR  
Button  
VCR  
Button  
STOP Button  
U
U I C K R E  
L
Q
T E / T I M E C O U N T E R  
A
D
S P / S L P  
MA  
N
P
S
T
N
AU  
T
O
TITLE  
T
ADE  
F
SEPIA  
H
B
A
K
W
1 / 1 0 0 0  
SHD  
For brief searching, press and hold  
VCR button or VCR button for  
more than two seconds.  
Position the Tape  
Set POWER switch to VCR and  
press STOP.  
• Release the button to return to normal  
playback.  
• Press and quickly release the VCR  
button or VCR  
button to rewind or  
fast-forward the tape.  
Stop-Action Pause  
• Press STOP to stop the tape.  
• During playback, press PLAY/PAUSE  
to “stop the action” and view one frame  
of the tape.  
Visual Search  
• During playback, press and release  
• Press PLAY/PAUSE to return to normal  
VCR  
button or VCR  
button if  
playback.  
you want to search the tape visually in  
forward or reverse.  
Caution: Pause is designed for momentary  
interruptions and should not be used for an  
extended period of time. If the camcorder  
remains in pause for more than five minutes,  
it enters the stop mode and turns off to  
prevent excessive tape wear.  
• Press PLAY/PAUSE to return to normal  
playback.  
62  
Playback  
Playback Features (continued)  
P
P
PLAY/PAUSE  
Button  
VCR  
VCR  
Button  
VCR  
Button  
STOP Button  
COUNTER  
R/M Button  
U
U I C K R E  
Q
L
T E / T I M E C O U N T E R  
A
D
S P / S L P  
MA  
N
P
S
T
N
AU  
T
O
TITLE  
T
ADE  
F
SEPIA  
H
B
A
K
W
1 / 1 0 0 0  
SHD  
Time Counter  
The time-counter display shows the actual time elapsed when playing back a  
segment of tape. The memory-stop feature helps locate a certain point on the  
tape. Turn memory stop on to stop the tape automatically during rewind or fast  
forward when the time counter reaches M 0:00:00.  
To Use the Memory-Stop Feature  
1. Locate the place on the tape you want  
2. Press COUNTER R/M for less than  
to return to, set the POWER switch to  
VCR, and press COUNTER R/M for  
more than two seconds to reset the  
counter to 0:00:00.  
one second to turn the time counter’s  
memory-stop feature on or off.  
When memory stop is on, an M  
appears before the time counter.  
3. Continue to play the tape. When you  
M 0:00:00  
want to return to the place you  
marked, press the STOP button.  
4. Press VCR . The tape rewinds to  
the time counter reading of  
M 0:00:00.  
Time Counter With Memory  
Stop Turned On  
63  
Playback  
Use the Cassette Adapter  
The camcorder uses a smaller size cassette, but records in standard VHS format. The  
cassette adapter allows you to play your VHS-C cassettes in a VCR just like other  
standard VHS cassettes.  
Insert the VHS-C cassette into the cassette adapter. Insert the cassette adapter into the  
VHS VCR like a normal VHS cassette.  
Install Cassette Adapter’s Battery  
Battery  
Compartment  
Cover  
1. Remove battery compartment cover.  
Notes: Replace the battery when the load time  
becomes much longer than normal.  
2. Install supplied “AA” battery so  
positive (+) and negative (–) ends  
align properly with (+) and (–)  
terminals in battery compartment.  
Remove the battery from the cassette adapter  
if it is not used for a month or more. This  
prevents possible damage from battery  
leakage. If leakage occurs, wipe up the liquid  
inside the compartment and replace the battery  
with a new one.  
3. Replace battery compartment cover.  
Insert Cassette into Cassette Adapter  
Tape Wheel  
Cassette  
Compartment  
Lid  
EJECT Switch  
1. Before inserting the cassette into the  
adapter, remove any slack in the tape  
by turning the tape wheel on the side of  
the cassette.  
3. Insert the cassette with the tape  
window on the left and facing up.  
Allow the cassette to drop into the  
adapter. Do not force the cassette.  
2. Slide EJECT to the right to open the  
cassette compartment lid.  
64  
Playback  
Use the Cassette Adapter (continued)  
Load Detector  
4. Gently close the cassette compartment  
lid until it locks into place. Make sure  
the cassette reel area under the adapter  
is free to turn while the cassette is  
loading.  
Caution: If the load detector is still  
extending from the side of the cassette  
adapter after you have attempted to load  
the cassette, loading is not complete. Try  
to load the cassette again. Attempting to  
insert the cassette adapter into a VCR  
with the load detector extending may  
cause damage to the adapter and/or VCR.  
Note: You should hear a whirring sound  
while the tape loads. The adapter’s load  
detector will automatically retract into the  
adapter.  
Remove Cassette from Cassette Adapter  
Access Hole  
Caution: Do not touch the  
reels during loading and  
unloading. It could cause  
injury or damage the cassette  
adapter or tape.  
Reels  
2. Use the access hole on the bottom of  
the adapter to push the cassette up and  
remove it from the adapter.  
1. Slide the adapter’s EJECT switch to  
the right. The load detector extends  
from the side and the whirring sound  
indicates the tape is being released  
before the adapter’s cassette  
3. Gently close the adapter’s cassette  
compartment lid.  
compartment lid opens.  
65  
Playback  
Playback on TV (or VCR) with Audio/Video Inputs  
To connect your camcorder to a TV monitor (or VCR) with audio/video inputs, you  
need an optional audio/video cable, such as VH83 shown on page 72. If your TV is  
already connected to a VCR, attach the camcorder to the VCR and watch what the  
camcorder is recording or playing on the TV.  
Back of  
Mono VCR or  
TV Monitor  
White  
Audio Plug  
Audio/Video  
Output Cable  
(Optional)  
AUDIO  
IN  
AUDIO Jack  
VIDEO  
IN  
Yellow Video Plug  
OR  
Back of  
Stereo VCR or  
TV Monitor  
White  
Audio  
Plug  
Y-Adapter  
(Optional)  
Audio/Video  
Output Cable  
(Optional)  
L
AUDIO  
IN  
VIDEO Jack  
R
VIDEO  
IN  
Yellow Video Plug  
Installation  
1. Attach the white plug on one end of  
the audio/video cable to the AUDIO  
IN jack on the TV (or VCR).  
2. Attach the yellow plug to the VIDEO  
IN jack on the TV (or VCR).  
3. Attach the white plug on the other end  
of the audio/video cable to the AUDIO  
jack (located under the small cover)  
on the back of the camcorder.  
Notes: If your cable does not have white  
and yellow plugs, attach the same color to  
the audio jacks.  
If your TV (or VCR) has stereo AUDIO IN  
jacks, attach the plug to the one labeled  
MONO. If one is not labeled MONO, you  
need a Y-adapter, such as AH25, shown on  
page 72 to hear both channels.  
4. Attach the yellow plug to the yellow  
VIDEO jack on the camcorder.  
66  
Playback  
Playback on TV (or VCR) with Audio/Video Inputs (continued)  
Playback Operation and How to Copy Tapes on the VCR  
1. A. Camcorder connected directly to  
TV: Turn on the TV and tune it to  
the video input channel.  
• During playback, use the playback  
features on pages 62-63.  
4. To copy what the camcorder is  
playing, place a blank cassette in the  
VCR, and press the VCR’s RECORD  
button.  
B. Camcorder connected to VCR that  
is already connected to TV: Turn  
on VCR and place it in the “line”  
or “camera mode”. (If your VCR  
does not have a “line” or “camera  
mode”, consult the VCR owner’s  
manual.) Operate the TV as you  
normally do to see the signal  
Note: Make sure the memory-stop feature  
is turned off (press COUNTER R/M) or the  
camcorder enters play-pause when the  
counter reaches M 0:00:00.  
5. Press STOP when you are finished.  
coming from the VCR.  
2. Set the POWER switch to VCR to  
turn on the camcorder. The power  
indicator lights.  
Caution: The unauthorized recording  
of copyrighted material may infringe  
the rights of others.  
3. Press PLAY/PAUSE.  
Viewing What the Camcorder is Seeing (or Recording)  
1. A. Camcorder connected directly to  
TV: Turn on the TV, and tune it to  
the video input channel.  
2. Set the POWER switch to CAMERA.  
Note: Turn the TV’s volume down to  
prevent a high-pitched squeal caused by  
feedback.  
B. Camcorder connected to VCR that  
is already connected to TV: Turn  
on VCR and place it in the “line”  
or “camera mode”. (If your VCR  
does not have a “line” or “camera  
mode”, consult the VCR owner’s  
manual.) Operate the TV as you  
normally do to see the signal  
3. Press the thumb trigger to begin  
recording. You can watch what the  
camcorder is seeing (or recording) on  
the TV screen.  
coming from the VCR.  
67  
Playback  
Playback on a TV Without Audio/Video Inputs  
To connect your camcorder to a TV without audio/video inputs, you need an optional  
1CVA147C RF output adapter and an optional coaxial RF cable, such as VH82 or  
VH90 shown on page 72. If your TV has audio and video inputs (or is connected to a  
VCR), refer to pages 66-67.  
VHF Antenna  
Optional Coaxial  
RF Cable  
(such as VH82 or VH90)  
OR  
Back of TV  
VHF  
OR  
Optional  
Transformer  
(Such as VH54)  
VHF  
AUDIO, RF DC  
OUT, VIDEO Jacks  
OR  
RF Output  
Adapter's Plug  
OUT TO TV Connector  
Optional  
300-75 Ohm  
VCR/TV Switch  
Transformer  
IN FROM ANT  
Connector  
Optional RF Output Adapter  
(1CVA147C)  
CH3/CH4 Switch  
Installation  
Note: If your TV has 300 ohm screw  
1. Disconnect the VHF antenna from  
your TV. Connect the antenna to the  
IN FROM ANT connector on the RF  
output adapter if you are going to  
leave the adapter connected to the TV.  
terminals, you need a 75/300 ohm  
transformer, such as VH54, shown on  
page 72.  
3. Attach the RF output adapter’s plug to  
the AUDIO, RF DC OUT, and VIDEO  
jacks located under the small cover on  
the back of the camcorder.  
Note: If your VHF antenna is the flat  
twin-lead type attached by two screws,  
you need an optional 300/75 ohm  
transformer.  
2. Attach one end of the optional coaxial  
RF cable to the OUT TO TV  
connector on the adapter, and attach  
the other end to the VHF input on  
your TV as shown.  
68  
Playback  
Playback on a TV Without Audio/Video Inputs (continued)  
Playback Operation  
4. Set POWER switch to VCR. Power  
1. Set the CH3/CH4 switch on the RF  
indicator lights.  
output adapter to channel 3 or 4.  
5. Press PLAY/PAUSE on the camcorder.  
2. Turn on the TV, and tune it to the same  
channel you selected with the RF  
During playback, use the playback  
output adapter’s CH3/CH4 switch.  
features described on pages 62-63.  
3. Place adapter’s VCR/TV switch in  
6. Press STOP on the camcorder when  
VCR.  
you are finished.  
Seeing What the Camcorder Is Recording  
1. Turn on the TV and tune it to channel  
3 or 4. Turn the TV’s volume down to  
prevent a high-pitched squeal caused  
by feedback.  
3. Set adapter’s VCR/TV switch to VCR.  
4. Set POWER switch to CAMERA.  
Power indicator lights.  
5. Press the thumb trigger to begin  
recording. You can watch what the  
camcorder is seeing (or recording)  
on the TV screen.  
2. Set the CH3/CH4 switch on the RF  
output adapter to the same channel  
you selected on the TV.  
Normal TV Viewing  
For normal TV viewing, leave the RF  
output adapter hooked up to the TV.  
Disconnect the adapter’s plug from the  
camcorder and place the adapter’s VCR/  
TV switch in TV.  
Note to Cable TV Installer  
This reminder is provided to call your attention to Article 820-40 of the  
National Electrical Code (Section 54 of Canadian Electrical Code, Part I), that  
provides guidelines for proper grounding and, in particular, specifies that the  
cable ground shall be connected to the grounding system of the building as  
close to the point of cable entry as practical.  
69  
Optional Accessories  
We invite you to take a look at some great ideas for sparking creativity and adding to  
the fun of using your compact VHS camcorder. The following pages have a selection  
of accessories to help make your memorable moments look and sound even better.  
These accessories are designed to make the process of recording and watching your  
videos more enjoyable.  
To order accessories, contact your local Dealer.  
If a dealer is not nearby, all accessories are available through toll-free ordering or by  
using the order form on page 73.  
AC201A Soft Carrying Case  
DCC08 Car Cord Adapter  
Do not use any other car cord  
with this camcorder.  
Custom compact soft case designed  
This car cord adapter enables you to  
especially to provide protection and utility operate your camcorder from your car,  
for your compact VHS camcorder and  
most accessories. Rugged fabric lined  
with soft non-abrasive material and  
generous padding. Has three outside  
pockets with storage for lens filters,  
adapters, batteries, and tapes.  
truck, or RV by plugging the car cord  
directly into the vehicle’s cigarette lighter  
socket. The DCC08 is designed  
specifically to convert power from a  
12-volt battery to a 6-volt output.  
70  
Optional Accessories  
FB1260 and FB120 Rechargeable  
Batteries  
Using the Optional AC088 Tripod  
Mounting the camcorder on a tripod, such  
as AC088, keeps the camcorder steady  
and produces excellent video results.  
This tripod’s fluid-effect head provides  
smooth camera pan and tilt. The quick-  
release mount makes it easy to attach or  
remove the camcorder. The grooved,  
tubular 3-section leg design folds down to  
26" when not in use. Rubber feet allow  
for sure footing.  
These rechargeable nickel-cadmium  
batteries are designed specifically for long  
life. The FB1260 is a 1-hour battery. The  
FB120 powers your camcorder twice as  
long as the FB1260 (depending on how  
much you use zoom and pause). Both can  
be recharged with the AC adapter/charger  
that came with your camcorder.  
U
I
C
U
K
R
E
Y
Q
T
E A / T I M E C O U N T E R  
D
S
P
/
S
L
P
MA  
H
S
N
U
P
A
U
T
O
T
I
T
L
E
D
E
FA  
S
E
P
I
A
W
1 / 1 0 0 0  
S
H
D
CPS91 AC Battery Charger  
The CPS91 battery charger plugs directly  
into an AC outlet and charges the  
FB1260, BB700, and FB120 camcorder  
batteries. Because the CPS91 operates on  
100-240 Volts, 50/60 Hz, it can be used  
virtually anywhere in the world. A plug  
adapter might be required in some  
countries. Charging takes approximately  
seven hours for the FB1260 (1-hour  
battery), 11 hours for the BB700, and 13  
hours for the FB120 (2-hour battery).  
Cautions: Before using a tripod, make sure  
it is stable enough to hold the camcorder  
without falling over. Do not transport the  
camcorder attached to the tripod.  
When attaching your camcorder to a tripod,  
be careful not to force the tripod screw into  
the camcorder’s tripod mounting hole.  
The tripod screw should not protrude into the  
camcorder more than approximately three-  
eighth (3/8) inch. Forcing the screw could  
damage the mounting hole on the bottom of  
the camcorder.  
All specifications and descriptions  
of accessories are subject to change  
without notice.  
71  
Optional Accessories  
1CVA147C RF Output Adapter  
VH54 Cable Transformer  
This 75-to-300 ohm transformer is used to  
connect a standard 75-ohm antenna cable  
(such as VH82 or VH90) to the 300 ohm  
screw terminals on a TV.  
This RF output adapter is used with a  
coaxial RF cable, such as VH82 or VH90,  
to connect your camcorder to a standard  
TV (one without audio/video inputs) for  
playback. If your antenna cable is the flat  
twin-lead type attached by two screws,  
you need a 300-to-75 ohm transformer. If  
your TV has 300 ohm antenna screw  
terminals, you need an optional 75-to-300  
ohm transformer such as VH54.  
VH83 Audio/Video Cable  
Coaxial RF Cables  
This six foot audio/video cable can be  
used to connect the camcorder to a TV  
monitor or VCR for tape playback or  
copying tapes.  
VH82 (6-ft)  
VH90 (12-ft)  
These RF cables are used with the RF  
output adapter to connect your camcorder  
to a standard TV (one without audio/video  
input jacks) for playback. If your TV has  
300 ohm antenna screw terminals, you  
need an optional 75-to-300 ohm  
AH25 Y-Adapter  
transformer such as VH54. If your  
antenna cable is the flat twin-lead type  
attached by two screws, you need an  
optional 300-to-75 ohm transformer.  
This Y-adapter allows you to connect your  
camcorder’s mono audio cable to a stereo  
TV or VCR.  
All specifications and descriptions of accessories  
are subject to change without notice.  
72  
Accessory Order Form  
Order Form for Camcorder Model CC6151/CC6251/CC6271  
Description  
Part No.  
AC088  
AC201A  
ACS091  
AH25  
Price  
Qty.  
Total  
Super Lightweight Tripod  
Soft Camcorder Case  
Shoulder Strap  
$ 39.95  
$ 39.95  
$ 12.95  
Y-Adapter  
$
2.95  
AC Battery Charger  
Car Cord Adapter  
CPS91  
DCC08  
FB120  
FB1260  
VH54  
$ 59.95  
$ 89.95  
$ 89.95  
$ 49.95  
Rechargeable Battery (Extended)  
Rechargeable Battery (Standard)  
75-300 Cable Transformer  
Coaxial RF-Cable  
Audio/Video Cable  
Coaxial RF-Cable  
RF Output Adapter  
AC Adapter/Charger  
and  
$
$
$
$
2.95  
6.95  
5.95  
7.95  
VH82  
VH83  
VH90  
1CVA147C $ 59.95  
241017  
$126.55  
DC Cable  
233087  
232845  
$ 27.80  
$ 71.35  
$
Cassette Adapter  
Bulb Assembly (Model CC6271)  
Prices are subject to change without notice.  
Total Merchandise ........................................................................................... $_________  
Sales Tax .......................................................................................................... $_________  
We are required by law to collect the appropriate  
sales tax for each individual state, county, and  
locality to which the merchandise is being sent.  
Shipping and Handling .................................................................................... $  
5.00  
Total Amount Enclosed ................................................................................. $_________  
Use VISA, MasterCard, or Discover.  
Money order or check must be in U.S.  
currency only. No COD or cash.  
Please complete other side also  
73  
Accessory Order Form  
Charge your order on your VISA,MasterCard,  
or Discover Card by filling in below  
USE YOUR CREDIT CARD  
IMPORTANT: Copy complete account number from your VISA card  
®
Expiration date:  
IMPORTANT: Copy complete account number from your MasterCard  
s
r
r
TM  
Expiration date:  
Copy Number above your name on MasterCard  
IMPORTANT:  
Copy complete account number from your Discover Card  
Expiration date:  
AUTHORIZED SIGNATURE  
Prices are subject to change without notice.  
A complete and correct order will  
save you days of waiting.  
Print or type your name and  
address clearly.  
Name:  
Street:  
Apt:  
Zip:  
City:  
State:  
Please make sure that both sides of this form have been filled out completely.  
• Allow 4 weeks for delivery.  
• All accessories are subject to availability.  
74  
Accessory Order Form  
To order accessories, contact your local Dealer.  
If a dealer is not nearby, you can also follow the directions below to order by  
telephone or direct-by-mail.  
United States and Canada Orders  
To place your order by phone, have your Visa, MasterCard, or Discover card ready  
and call the toll-free number listed below between 8 AM and 10 PM (EST)  
Monday through Friday or between 9AM and 5PM (EST) Saturday.  
Use this number only to place an order for accessory items listed on  
this order form.  
1-800-338-0376  
To place your order by mail, detach and mail the completed order form with credit  
card information, money order, or check in U.S. currency (made payable to  
Thomson Consumer Electronics, Inc.) to the following address:  
Video Accessories  
PO Box 8419  
Ronks, PA 17573  
75  
Trouble Checks  
Troubles sometimes are caused by simple “faults” that you can easily correct without  
the help of a service technician by first checking a few basic remedies.  
Before you call or take your camcorder to an Authorized RCA Camcorder Service  
Center, look below for the type of trouble you are experiencing. Then perform the  
simple checks and adjustments listed for that trouble.  
If service should be necessary, the warranty information lists what your warranty  
covers and explains how to get service.  
Trouble  
Checks and Adjustments  
No power  
Set the POWER switch to CAMERA or VCR to turn on  
the camcorder. The power indicator lights.  
If using battery, it might need to be recharged.  
If using AC adapter/charger, make sure it is plugged  
into a working outlet.  
Won’t record or  
playback  
If using AC adapter/charger, make sure it is plugged  
into a working outlet.  
If the dew indicator ( ) flashes in the viewfinder, there  
is moisture in the camcorder. Wait until the dew  
indicator no longer appears before operating the  
camcorder.  
Make sure POWER switch is set to correct position for  
desired operation.  
There might not be a cassette in the camcorder.  
Try ejecting and reinserting the cassette.  
The cassette tape might be broken, try another cassette.  
You might have reached the end of the cassette, try  
rewinding it.  
Won’t playback  
Won’t record  
POWER switch must be set to VCR position.  
Safety tab removed or closed. (See page 22.)  
POWER switch must be set to CAMERA.  
No picture  
Open lens cover.  
Camcorder turns  
itself off  
Set POWER switch to OFF and then to CAMERA or  
VCR to turn back on. If camcorder is left in record-  
pause or play-pause for several minutes, it turns off to  
prevent tape wear.  
76  
Trouble Checks  
Trouble  
Checks and Adjustments  
Tape stops during  
rewind or fast  
forward  
Time-counter memory might be on. Whenever an “M”  
appears with the time-counter display, the camcorder  
stops rewinding (or fast forwarding) when counter  
reads M 0:00:00. Press VCR  
or VCR  
again to  
continue rewinding or fast forwarding, or press  
COUNTER R/M to turn off the memory-stop feature.  
Camcorder remains in  
pause mode  
Press PLAY/PAUSE to return to normal playback.  
Dew indicator flashes  
in viewfinder  
If the dew indicator ( ) flashes in the viewfinder,  
there is moisture in the camcorder. Wait until indicator  
no longer appears before operating the camcorder.  
Poor auto-focus  
operation  
Subject is dark or behind glass. Auto-focus may not  
work under these conditions. Rotate AE dial to MAN  
and focus manually. See pages 36-37.  
Subject is not in center of viewfinder or two subjects  
are at different distances. Rotate AE dial to MAN and  
focus manually. See pages 36-37.  
Lens is smudged, and image appears unfocused.  
Viewfinder displays  
are out of focus  
Lens is smudged and image appears unfocused.  
Eyepiece focus control is misadjusted.  
The small C (color) and B (brightness) controls on the  
bottom of the viewfinder control the color and bright-  
ness of the viewfinder. These controls are set at the  
factory and should require no adjustment. If the color  
or brightness every does need adjustment, carefully use  
a plastic screwdriver and make the adjustments with  
caution to prevent damaging the miniature controls.  
Picture is too dark or  
subject too dark  
For best results, only use higher shutter speeds  
outdoors. Rotate AE dial to sports ( ) or 1/1000.  
See page 43.  
Subject in front of a strong backlight. Rotate AE dial  
to select back lit ( ) or press BACKLIGHT button.  
See pages 43-44.  
Subject in front of a strong frontlight. Rotate AE dial  
to select front lit ( ) or press FRONTLIGHT button.  
See pages 43-44.  
Rotate AE dial to MAN and adjust exposure manually.  
See pages 40-41.  
Model CC6271 Only: Turn on built-in light.  
77  
Trouble Checks  
Trouble  
Checks and Adjustments  
Sound is too low or  
distorted  
Subject was too far from camcorder.  
Picture recorded  
with special effect  
AE dial might be turned to special effect mode.  
Rotate the AE dial to AUTO. See page 43.  
Colors do not look  
natural on recording  
Try adjusting white balance. See pages 38-39.  
Title recorded on  
tape  
Title is recorded when it appears in viewfinder.  
Remove the title. See pages 20-21 and 46.  
Date and/or time are  
recorded on tape  
Displays are recorded on tape whenever they appear  
in the viewfinder. Remove them from viewfinder  
when recording. See pages 20-21.  
When AUTO DATE is selected (AE dial in AUTO),  
date display is automatically recorded when you  
begin recording or change the cassette.  
See pages 20-21.  
Date and/or time are  
incorrect  
Clock lithium cell battery might need replacing.  
See page 17.  
Date or time might need to be set. See pages 18-19.  
Cannot set REC or  
INT. TIME for  
animation or time-  
Make sure there is a tape in the camcorder.  
Check tape speed setting. Tape speed must be set  
to SP for time-lapse or animation recording.  
Make sure AE dial is not set to AUTO to display  
MENU. See pages 50-53.  
lapse recording  
Tally light does not  
light during  
TALLY LAMP feature set to OFF in the TALLY LAMP  
menu. See page 54.  
recording  
Vertical white lines  
appear when shoot-  
ing bright object  
This might occur when the background extremely  
contrasts with the subject.  
Error number (E01,  
E02, etc.) appears in  
viewfinder  
Try disconnecting power source. Wait ten seconds  
and then connect power source again. If error  
number does not disappear from viewfinder, consult  
your Authorized RCA Camcorder Service Center.  
78  
Trouble Checks  
Trouble  
Checks and Adjustments  
Model CC6271:  
light turns on and  
off  
• Lighting condition changes frequently. Set LIGHT  
AUTO•OFF•ON light switch to ON or OFF.  
Streaks in picture  
during playback or  
play-pause  
• Adjust tracking with MENU dial. See page 61.  
Bright, crystal-  
shaped spots in  
viewfinder  
Sunlight is directly entering the lens.  
Colored bright  
spots appear in  
viewfinder  
Models CC6251 and CC6271: Black spots or bright spots  
of light (red, green, or blue) may appear. These spots are  
not recorded on the tape and are not due to a defect.  
Rechargeable  
battery runs down  
sooner than  
If battery has not been used for some time, completely drain  
the battery’s power and recharge it.  
Battery run times are measured when the camcorder is  
recording continuously. You can check your battery by first  
fully charging it and then aiming the camcorder at a clock  
and recording the picture of the clock. When the recording  
stops, play the last recorded section and note the clock time.  
A one-hour battery should give you about 60 minutes of  
recording time. In practical use, you might not be able to  
record for the full time because the camera uses battery  
power when it is waiting between recordings (record-pause)  
and zooming.  
expected  
79  
Care and Maintenance  
Clean the Camcorder  
To clean the camcorder’s exterior, remove  
any power source connected to the  
camcorder and gently wipe it with a clean  
soft cloth.  
Caution: Use of strong cleaning  
products, such as those containing  
alcohol or benzine, might damage  
the camcorder.  
Clean the Camcorder’s Lens  
To clean the camcorder’s lens, blow it with a blower brush and gently  
wipe the lens with cleaning tissue and commercially prepared cleaning  
solution designed for use on camera lens. Improper cleaning might  
scratch the lens.  
U A  
P /  
U
I
C
K
R
E
Y L  
A P  
Q
T
E / T I M E C  
O U N T E R  
A
D
S
P / S L P  
Caution: Do not touch the lens  
with your fingers. The oil from  
your skin might damage the lens.  
MA  
N
P
I
H
T
L
T
L
N
O
AU  
T
R
O
F
T
T
ITLE  
A
B
D
A
E
F
S
E
P
I
A
H
I
G
K
W
1 / 1 0 0 0  
S
H
D
Lens  
Clean the Camcorder’s Viewfinder  
You can remove the viewfinder eyepiece for cleaning.  
1. Turn the eyepiece counterclockwise  
and pull it out.  
2. Remove dust using a blower brush.  
3. Reattach the eyepiece by aligning the  
reference marks, and then turn the  
eyepiece clockwise until it clicks.  
Reference  
Marks  
80  
Care and Maintenance  
Proper Care and Storage  
• The camcorder might be damaged by  
improper storage or handling. Do not  
subject the camcorder to swinging,  
shaking, or dropping.  
• Keep dust and grit from entering the  
camcorder’s cassette door. Dust and  
grit are abrasive and cause excessive  
wear to both the camcorder’s  
recording/playback heads and  
cassettes.  
• Do not store the camcorder in  
temperatures below -22°F (-30ºC) or  
above 149°F (65ºC).  
• When the camcorder is not in use,  
always remove the cassette and AC  
adapter/charger or battery.  
• Always close the lens cover when the  
camcorder is not in use.  
• Before handling your camcorder, make  
sure your hands and face are free from  
any chemical products such as suntan  
lotion, as it might damage the finish.  
• Retain the original carton for future  
storage or shipping purposes.  
Things to Avoid  
• Do not attempt to disassemble your  
camcorder. There are no user-  
serviceable parts inside.  
• Do not operate the camcorder near the  
ocean as salt water or salt water spray  
might damage the internal parts of the  
camcorder.  
• Avoid operating your camcorder  
immediately after moving it from a  
cold location to a warm location. Give  
the camcorder 1-1/2 to 2 hours to reach  
a stable temperature before inserting a  
cassette. When the camcorder is  
moved from cold to warm,  
• Do not operate the camcorder for  
extended periods in temperatures  
below 40°F (4ºC) or above 95°F  
(35ºC).  
• Do not expose the camcorder or  
adapter/charger to rain or moisture.  
If any component becomes wet, turn  
off the power and take the unit to an  
Authorized RCA Camcorder  
Service Center.  
condensation might cause the tape to  
stick to the headwheel and damage the  
headwheel or tape.  
• Do not aim your camcorder at the sun  
or other bright objects.  
• Do not use an adapter/charger or  
batteries other than the ones specified  
for the camcorder. Use of the wrong  
accessories might cause damage to the  
camcorder.  
• Do not leave your camcorder in direct  
sunlight for extended periods of time.  
The resulting heat buildup might  
permanently damage the camcorder’s  
internal parts.  
• Do not operate the camcorder in  
extremely humid environments.  
81  
Specifications  
General  
Power requirement: 6VDC  
Power consumption:  
Viewfinder  
Models 6251 and 6271  
.55" Color viewfinder  
Model 6151  
CC6151: 5.0 watts  
CC6251: 5.1 watts  
CC6271 (normal): 5.1  
0.5" Black-and-white electronic viewfinder  
Camera Section  
CC6271 (light on): 8.0 watts  
Weight: CC6151: 1.8 lbs. (800g)  
CC6251: 1.8 lbs. (780g)  
CC6271: 1.8 lbs. (790g)  
Dimensions – Including Viewfinder:  
Models 6251 and 6271  
4-1/2" (W) x 4-5/8" (H) x 8-3/4" (D)  
114 (W) x 117 (H) x 222 (D) mm  
Model 6151  
Image sensor: 1/4" CCD imager  
Lens: F1.6, f=3.8 to 83.6mm  
22:1 power zoom lens  
Filter diameter: 46 mm  
Tripod Mount  
One 1/4" x 20 threaded hole  
AC Adapter/Charger  
4-1/2" (W) x 4-5/8" (H) x 9-9/16" (D)  
114 (W) x 117 (H) x 242 (D) mm  
Video Recorder Section  
Format: VHS-C  
Power requirement: 100-240 V,  
50/60 Hz.  
Power consumption: 23 watts  
Weight: .71 lbs. (300g)  
Dimensions:  
Record/playback system:  
Four video record/playback heads  
One flying erase head  
Video signal: EIA standard  
NTSC color  
5-9/16"(W) x 1-11/16"(H) x 2-11/16"(D)  
140 (W) x 42 (H) x 68 (D) mm  
Information to User  
Increase the separation between the  
equipment and receiver.  
This equipment has been tested and found to  
comply with the limits for a Class B digital  
device pursuant to Part 15 of the FCC Rules.  
These limits are designed to provide  
Connect the equipment into an outlet on a  
circuit different from that to which the  
receiver is connected.  
reasonable protection against harmful  
interference in a residential installation. This  
equipment generates, uses, and can radiate  
radio frequency energy and, if not installed  
and used in accordance with the instructions,  
may cause harmful interference to radio  
communications. However, there is no  
guarantee that interference will not occur in a  
particular installation. If this equipment does  
cause harmful interference to radio or  
television reception, which can be determined  
by turning the equipment off and on, the user  
is encouraged to try to correct the interference  
by one or more of the following measures:  
Consult the dealer or an experienced radio/  
TV technician for help.  
Alterations or modifications carried out  
without appropriate authorization may  
invalidate the user’s FCC right to operate the  
equipment.  
This Class B digital apparatus meets all  
requirements of the Canadian Interference —  
Causing Equipment Regulations.  
Cet appareil numérique de la classe B respecte  
toutes les exigences du Réglement sur le  
matériel brouilleur du Canada.  
Reorient or relocate the receiving antenna.  
82  
Customer Assistance and Service  
Thomson provides a toll-free telephone  
You can reach Thomson at the  
following number:  
number to help you with any problems you  
may encounter with your camcorder. Many  
can be diagnosed over the phone, and if  
necessary, repair or replacement will be  
arranged. Please have your camcorder model/  
serial number and date of purchase ready  
when you call. If your unit is out of warranty,  
we will quote the cost of a repair or  
800-283-6503  
(Toll free inside U.S.A.)  
Our toll-free Camcorder number  
operates from 8 a.m. to 5 p.m., CST  
Monday – Friday  
for U.S. customers only  
replacement unit to you.  
Returning equipment to Thomson for repair or exchange  
Always consult Thomson and get a Return  
If we are unable to resolve your problem over  
the phone, we will gladly service your unit or  
exchange it for a new or refurbished  
camcorder. Refer to the limited warranty on  
the reverse side to learn about your specific  
rights and responsibilities.  
Authorization number before returning  
anything! Obtain a Return Authorization  
(RA) number from the telephone  
representative before returning your  
equipment to avoid delays, accounting errors,  
or even loss of your unit.  
Important information to customers who ship defective equipment to  
Thomson Consumer Electronics  
The Thomson representative who authorized  
the return of your equipment will give you an  
RA number over the phone. They will also  
provide you with instructions on where and  
how to return your Camcorder. Write the  
number in large, clear characters on the  
outside of the box. To avoid confusion and  
misunderstandings, shipments without an RA  
number clearly visible on the outside of the  
box will be returned to you at your expense.  
are located on the bottom of your unit.  
If your Camcorder is within the warranty  
period, please provide a copy of the bill of sale  
to verify purchase date. Use the original box  
and packing material to protect the equipment  
from damage in shipment.  
For your protection, insure all shipments for  
full replacement value and use a reliable  
shipper. Thomson assumes no responsibility  
for warranty shipments from the customer to  
the factory if not shipped in the manner  
prescribed by Thomson.  
Include a brief note describing the problem  
and any conversations about the problem you  
have had with Thomson personnel.  
Include your name, address and model/serial  
number of your Camcorder. These numbers  
83  
Limited Warranty  
2. The exchange location will notify you of its  
arrival.  
What your warranty covers:  
Any defect in materials or workmanship.  
3. Take your unit, excluding all accessories,  
and your evidence of purchase date, such as  
a bill of sale, to the exchange location and  
you will be provided the new or refurbished  
unit.  
For how long after your purchase:  
90 days for labor charges.  
One year for parts.  
The warranty period for rental units begins  
with the first rental or 45 days from date of  
shipment to the rental firm, whichever  
comes first.  
4. If the repairs were covered by your  
warranty, you will not be billed.  
If you are not located near an exchange  
point:  
What we will do:  
1. Provide your Discover, MasterCard, or Visa  
account number and expiration date to our  
phone representative. This is for security  
purposes. If we receive your unit,  
During the initial 90 days  
Exchange your camcorder with a new or  
refurbished unit, or repair your camcorder.  
The option will be ours. There will be no  
cost to you.  
excluding all accessories, within 14 days  
from the date you were provided the RA  
number, only items not covered by  
warranty will be charged to your account.  
IF YOUR UNIT IS NOT RECEIVED  
WITHIN 14 DAYS, THE SUGGESTED  
RETAIL VALUE OF THE CAMCOR-  
DER WILL BE CHARGED TO YOUR  
CREDIT CARD. This amount will be  
credited if the unit is subsequently  
After the 90 days and within one year  
Exchange your camcorder with a new or  
refurbished unit, or repair your camcorder.  
The option will be ours. Parts will be  
provided at no charge, but you will be  
responsible for the cost of labor required  
for the repair.  
How you get service:  
received.  
Call 1-800-283-6503 and have your unit’s  
date of purchase and model/serial number  
ready. The model/serial number  
information is on the bottom of your  
camcorder.  
2. We will send you a replacement unit next  
business day delivery in the continental  
U.S.A.  
3. You will receive an invoice packed with the  
replacement product, but will not be  
A representative will troubleshoot your  
problem over the phone. If the  
charged for the unit portion of the invoice  
amount if we receive your unit within 14  
days from the date you were provided the  
RA number. Any labor and parts charges  
not covered by our warranty will be  
representative determines that you should  
receive a replacement unit, you will be  
provided with a Return Authorization (RA)  
number and the location of a nearby  
exchange point if one exists. No returns  
will be accepted without the RA number.  
included and charged against your account.  
4. Ship the unit back to us, excluding all  
accessories, using the replacement unit’s  
carton. Shipping instructions will be  
included in the carton along with your RA  
number which will allow you to easily ship  
the unit back to us. Make sure you insure  
your shipment in case of damage or loss.  
Include with the shipment:  
To receive a replacement Camcorder  
before you return yours:  
If you are located near an exchange point:  
1. We will send a replacement unit to the  
exchange point next business day delivery  
in the continental U.S.A.  
84  
Limited Warranty  
Evidence of purchase date, such as a  
bill of sale, to verify your unit’s  
warranty eligibility.  
Take your unit to the Authorized RCA  
Camcorder Service Center of your choice.  
Show the Authorized RCA Camcorder  
Service Center representative evidence of  
purchase date, such as a bill of sale.  
A brief note describing your  
camcorder’s problem.  
Your name, address and phone number.  
Pick up your camcorder when repairs are  
complete.  
Return transportation, storage, handling, and  
insurance costs are your sole responsibility.  
We accept no liability in case of damage or loss.  
What your warranty does not cover:  
Adjustment of customer controls.  
Damage from misuse or neglect.  
To receive a replacement unit after we have  
received your unit:  
A unit that has been modified or  
incorporated into other products or is used  
for institutional or other commercial  
purposes.  
1. Write the RA number on the outside of  
the carton used to return the unit.  
Make sure you insure your shipment in  
case of damage or loss.  
Batteries for remote control and clock.  
Cleaning of video/audio heads.  
2. Carefully pack the unit, excluding all  
accessories, using the original box and  
packing material if possible.  
Camcorders purchased or serviced outside  
the U.S.A.  
3. Include with the shipment:  
Evidence of purchase date, such as a  
bill of sale, to verify your unit’s  
warranty eligibility.  
Return transportation, storage and handling  
costs of your unit, including insurance for  
loss or damage.  
A brief note describing your camcorder  
problem.  
Acts of God, such as but not limited to  
lightning damage.  
Your name, address and phone number.  
Product Registration:  
Return transportation, storage, handling, and  
insurance costs are your responsibility. We  
accept no liability in case of damage or loss.  
Please complete and mail the Product  
Registration Card packed with your  
camcorder. It will make it easier to contact  
you should it ever be necessary. The return  
of the card is not required for warranty  
coverage.  
4. The representative will advise the address  
to mail a cashier’s check or money order  
for payment if there are any out of  
warranty labor or parts charges and you  
elect not to use your credit card.  
How State Law relates to warranty:  
5. Upon receipt of your product, a new or  
refurbished unit will be shipped to you  
next business day delivery in the  
continental U.S.A.  
This warranty gives you specific legal  
rights and you also may have other rights  
that vary from state to state.  
If you purchased your camcorder outside  
the United States:  
To have your Camcorder repaired by an  
Authorized RCA Camcorder Service  
Center:  
This warranty does not apply. Contact your  
dealer for warranty information.  
Check with your dealer or call 1-800-336-  
1900 for the Authorized RCA Camcorder  
Service Center nearest you.  
85  
Index  
Built-in light  
1 S 1/1000 indicator 28, 43  
(model CC6271) 58  
Bulb for light, replacing  
(model CC6271) 59  
A
Accessories  
included 3  
optional 70  
C
C (color) control  
order form 73  
(models CC6251 and CC6271) 11, 77  
Cable TV installer note 69  
Camcorder, cleaning 80  
Camcorder’s operating controls 10  
Camera edit feature 33  
Car cord adapter 16  
Accessory order form 73  
Adapter/charger  
charging battery 14  
using 4, 12  
AE dial  
7, 8, 10, 18, 20, 21, 24, 32, 34, 35,  
36, 38, 40, 43, 44, 46, 47, 48, 50, 52,  
54, 55, 56  
indicators 28, 43  
features 43  
Animation indicator 31, 51  
Animation recording 50  
Assistance 1, 3, 83  
Attach shoulder strap, 57  
Audio/video jacks 11, 66, 68  
Auto date display 20, 32  
Auto date feature 20, 32  
Auto exposure 40  
Care and maintenance  
clean the camcorder 80  
clean the camcorder’s lens 80  
clean the camcorder’s viewfinder 80  
proper care and storage 81  
things to avoid 81  
Care and storage  
battery 15  
camcorder 81  
cassette 23  
Cassette adapter 64  
Cassette care and storage 23  
Cassette compartment 11  
Cassette warning 29  
Auto focus 36  
Auto head cleaner 33  
AUTO indicator 28  
AUTO mode 8, 32  
Auto white balance 38  
Automatic head-cleaning system 22  
Cassettes  
inserting and removing 23  
Cassette's tape wheel 5, 23  
Cautions i  
CHARACTER menu 47  
Checks and adjustments 76  
Clean the camcorder 80  
Clean the camcorder’s lens 80  
Clean the camcorder’s viewfinder 80  
Clock cell battery compartment 11, 17  
Clock cell indicator 17, 31  
Color enhancement light  
(model CC6271) 10, 58  
Contents 1  
B
B (bright) control  
(models CC6251 and CC6271) 11, 77  
BACK LIT indicator 43, 44  
Back-lit feature 43, 44  
BACKLIGHT button 44  
BATT. (battery) RELEASE button 11, 13  
Battery  
attaching and removing 13  
care and storage 15  
charging 14  
level indicator 15, 29  
refreshing 14  
Copy tapes 67  
COUNTER R/M button 10, 63, 67  
Customer assistance and service 83  
using 13  
Battery, installing in cassette adapter 64  
86  
Index  
D
Date and time displays  
setting 18  
Date, time, and title displays  
recording 20  
DATE/TIME button 10, 20, 21, 29, 47  
DATE/TIME menu 18  
DC cable 12, 13, 14, 16  
DC in jack 4, 12  
AUTO RELEASE 43  
BACK LIT 28, 43, 44  
battery level 15  
cassette warning 29  
clock cell 17, 31  
date display 29  
exposure 30, 41, 44  
focus 30, 37  
FRONT LIT 28, 43, 44  
HAZE 28  
Demo mode 55  
HZ:HAZE 43  
DEMO MODE menu 55  
Design specifications 82  
Dew warning 30, 77  
Displays, status 29  
interval time 49, 53  
LENS COVER 31  
MAN 28  
manual white balance 29  
MWB 39  
record time 51, 53  
REFRESH 14  
S 1/1000 28  
E
EJECT button 5, 11, 23, 60  
Erase protection 22  
SD:SHADOW 28, 43  
self-timer 31  
SEPIA 28, 43  
Exposure control 40, 41  
Exposure indicator 41, 44  
EXPOSURE menu 41  
SPORTS 28, 43  
TAPE END 25, 31  
tape length 31  
tape speed 31  
time counter 31  
Eyepiece focus control 6, 11, 27, 60  
F
Fade/wipe feature 42  
First time operation 3  
Flying erase head 33  
Focus indicators 30, 37  
FOCUS menu 37  
time display 29  
time lapse 31, 53  
time remaining 25, 31  
title display 29  
Focusing 36  
tracking 29  
FRONT LIT indicator 43, 44  
FRONTLIGHT button 44  
Full auto feature 32  
white balance 39  
zoom level 29, 34  
Information to user 82  
Inserting and removing cassettes 23  
INT. TIME menu 49, 52  
Interval indicators 49, 53  
H
Handstrap 4, 11  
Head cleaning 22, 33  
HZ:HAZE indicator 28, 43  
J
I
JLIP (joint level interface protocol)  
identification number 56  
JLIP connector 11, 56  
JLIP ID no. 56  
Indicators  
1 S 1/1000 43  
AE dial 28, 43  
animation 31, 51  
AUTO 28, 43  
JLIP ID NO. menu 56  
87  
Index  
L
Lens 10  
Lens cover 4  
Playback features  
memory-stop 63  
position the tape 62  
stop-action pause 62  
LENS COVER control 4, 11  
LENS COVER indicator 31  
Light, color enhancement  
(model CC6271) 58, 59  
LIGHT OFF•AUTO•ON switch  
(model CC6271) 11, 58  
Limited warranty 84  
time counter 63  
tracking 61  
visual searching 62  
Playback on a TV without audio/video  
inputs 68  
Playback on TV (or VCR) with  
audio/video in jacks 66  
Playback speeds 22  
Plug adapter, optional 12  
Power indicator 5, 11, 16  
POWER switch  
Lithium cell  
inserting and removing 17  
Lithium cell indicator 17, 31  
Low-contrast indicator 36  
5, 9, 11, 13, 15, 16, 18, 20, 24, 29,  
32, 33, 35, 36, 38, 40, 42, 58, 60,  
62, 63, 67, 69  
M
M.W.B. menu 39  
Powering your camcorder  
using adapter/charger 12  
using battery 13  
Main MENU 18, 24, 29, 35, 36, 38,  
41, 47, 48, 50, 52, 54, 55, 56  
MAN indicator 28  
using optional car cord adapter 16  
Preset title, recording 46  
Problem solving 76  
Manual exposure 40  
Manual white balance 38  
Memory stop 63  
Product registration i  
PUSH button 5, 11, 23, 60  
MENU dial 7, 11, 18, 19, 24, 32, 34, 35,  
36, 38, 41, 47, 48, 49, 50, 51, 52,  
53, 54, 55, 56, 61  
Microphone 10, 32  
MWB indicator 39  
Q
QUICK REC button 10, 33  
Quick record feature 33  
Quick review feature 33  
O
Operating controls 10  
R
Optional accessories 70  
Optional plug adapter 12  
Order form, accessories 73  
RBRC seal 13  
REC TIME menu 51, 53  
Record indicator 8, 29  
Record time indicators 31, 49, 51  
Recording  
P
Pause indicator 5, 8  
Pause, stop-action 62  
PLAY/PAUSE button 9, 10, 61, 62, 67, 69  
Playback  
animation 50  
first time 3  
self timer 48  
time lapse 52, 53  
titles 20, 46  
Recording speeds 6, 22  
REFRESH button 14  
REFRESH indicator 14  
Registration i  
first 9  
on a TV without audio/video inputs 68  
on TV (or VCR) with audio/video  
inputs 66  
using cassette adapter 64  
viewfinder 60  
RF DC OUT jack 11, 68  
88  
Index  
RF output adapter, optional 68  
Thumb trigger 11, 32, 33, 49, 51, 53, 67  
Time counter 31, 63  
Time display: 20  
S
Time-counter display 31, 63  
Time-lapse indicator 31, 53  
Time-lapse recording 52, 53  
Time-remaining display 24, 25, 31  
Time-remaining feature 24  
Tips  
Safety information i  
Safety precautions, battery 13  
Safety tab 22  
SD:SHADOW indicator 28, 43  
Second MENU 47, 49, 51, 52,  
53, 54, 55, 56  
recording 26  
travel 45  
Self timer 48, 49  
Self timer indicator 31, 49  
SEPIA indicator 28, 43  
Setting tape length 7  
Shoulder strap, attach 57  
Shoulder strap attachment rings 11, 57  
Shutter speed indicator 43  
SLP recording speed 6  
SLP tape speed 6, 22  
Solving problems 76  
SP recording speed 6, 22  
SP tape speed 6, 22  
SP/SLP button 22, 24, 50, 52  
Specifications 82  
Speeds, recording and playback 22  
Sports feature 43  
TITLE button 29, 46, 47  
Title display 20, 29, 46, 47  
Titles  
creating your own 47  
recording preset 46  
recording your own 20  
Tracking 61  
Tracking indicator 29, 61  
Travel tips 45  
Tripod, using 71  
Trouble checks 76  
U
Unpack camcorder and accessories 3  
SPORTS indicator 28, 43  
Status displays 29  
STOP button 9, 10, 61, 62, 63, 67, 69  
Stop-action pause 62  
V
VCR buttons 9, 10, 33, 62, 63  
Videocassettes 22  
Viewfinder 6, 11, 27  
adjust for viewing 27  
eyepiece focus control 27  
playback 60  
T
Table of contents 1  
Tally lamp feature 33, 54  
TALLY LAMP menu 54  
Tally light 8, 10, 32, 33, 49  
Tally light feature 33, 54  
Tape copying 67  
Visual searching 62  
W
Warranty, limited 84  
White balance feature 38  
White balance indicators 29, 39  
TAPE END indicator 25, 31  
Tape, inserting 5  
Tape length feature 24  
Tape length indicators 25, 31  
TAPE LENGTH menu 7, 25  
Tape length, set 7, 24  
Tape wheel 5, 23  
Tele macro feature 35  
TELE MACRO menu 35  
Tele macro zooming 35  
Things to avoid 81  
Z
Zoom buttons 11, 34, 36, 38  
Zoom level indicator 29, 34  
Zoom speed feature 34  
ZOOM SPEED menu 35  
Zooming 34  
89  
10330 N Meridian Street  
Indianapolis, IN 46290  
©
1998 Thomson Consumer Electronics, Inc.  
®
Trademark(s) Registered  
Marca(s) Registrada(s)  
Printed in Japan  
TOCOM 15331700  

QSC Audio Car Speaker AD S82 User Manual
Profile Car Speaker BX10 User Manual
Planar Systems Car Video System PLL1911M User Manual
Panasonic AG AC160AEN User Manual
Olympus 227665 User Manual
LG Electronics LG Lifes Good Car Video System W2043T User Manual
KitchenAid KFP710 User Manual
Kenwood eXcelon KAC X811D User Manual
Kalorik Team International Group Blender 33029 User Manual
K2 Bike K013011 User Manual