AP-5102
AcousticPerformance™ Series
AP-5102
High power, installation
loudspeaker
Features
Performance Spaces ∙ Worship Facilities ∙ Dance/Night Clubs ∙
Sports Facilities ∙ Themed Entertainment
• DMT™ (Directivity Matched
Transition) ensures smooth,
coherent power response
across the listening plane
The QSC AcousticPerformance™ AP-5102
is a professional, two-way, fullrange
The AP-5102 enclosure features M10
mounting points for suspension via eye-
bolts as well as mount points for an
optional yoke bracket.
• 105 degree coverage of the
axisymmetric waveguide
matches natural coverage
of the 10-inch woofer at the
crossover point for consistent
power response
loudspeaker ideal for a variety of installed
sound reinforcement applications requiring
high power, wide coverage and compact
size. The AP-5102 uses a high power-
capacity, 76mm (3-inch) diaphragm
compression driver and combines it with
a 254mm (10-inch) woofer to deliver
exceptional full bandwidth reproduction.
Presenting a clean, unobtrusive look,
AcousticPerformance grilles are unadorned
eliminating the need to cover-up logo
treatments which can be difficult to hide
or remove. The grille is also lined with
acoustically transparent backing adding to
the enclosure’s professional appearance. The
AP-5102 is available in black (RAL 9011),
and white (RAL 9010) finishes.
• 3-inch voice coil compression
driver for outstanding high-
frequency performance
The uniform power-response of the
AP-5102 loudspeaker is a result of
• M10 fittings and yoke
mount fittings offer flexible
deployment options for a
variety of applications
DMT™ (Directivity Matched Transition), a
design approach that matches LF and HF
coverage in the cross-over region. Another
key to the extraordinary accuracy and flat
power response of the AP-5102 is the
axisymetric waveguide with uncompromised
performance in both the vertical and
horizontal axes. The result is remarkably
consistent coverage and smooth, accurate
reproduction on and off-axis.
To minimize impact and disposal fees at the
job site, all AcousticPerformance loudspeakers
are packaged in environmentally friendly,
recyclable cartons.
• Clean industrial design with
unadorned grilles compliment
most decors and settings
• NL4 Speakon™ connector and
covered barrier strip terminals
• Bi-Amp / Passive switchable
The AP-5102 may be used as a passive (full-
range) loudspeaker to minimize amplifier
channel count or it may be bi-amplified for
greater control and performance. To further
enhance performance, bi-amp and full-
range tunings using QSC Intrinsic Correction
techniques are available for Q-Sys and future
QSC products.
• 15-ply Baltic birch plywood
construction
• 16-Gauge powder coated
steel grilles
• Conforms to tests
outlined in ANSI/ EIA-636:
Recommended Loudspeaker
Safety Practices
• Available in black (RAL 9011)
and white (RAL 9010)
• Complete EASE, CAD &
BIM information available
at qsc.com
AP-5102 Horizontal Polars
Polar Plot
Polar Plot
90
90
200Hz
500Hz
630Hz
800Hz
1000Hz
250Hz
315Hz
400Hz
180
0
0
0
180
0
+
+
+
+
-6
-6
-6
0
0
0
6
6
6
-6
0
6
270
270
Polar Plot
1250Hz
Polar Plot
90
90
3150Hz
4000Hz
5000Hz
6300Hz
1600Hz
2000Hz
2500Hz
180
180
0
+
-6
0
6
270
270
Polar Plot
90
8000Hz
10000Hz
12500Hz
16000Hz
180
270
AP-5102 Vertical Polars
Polar Plot
Polar Plot
90
90
200Hz
500Hz
630Hz
800Hz
1000Hz
250Hz
315Hz
400Hz
180
0
0
0
180
0
+
+
+
+
-6
-6
-6
0
0
0
6
6
6
-6
0
6
270
270
Polar Plot
Polar Plot
90
90
1250Hz
3150Hz
4000Hz
5000Hz
6300Hz
1600Hz
2000Hz
2500Hz
180
180
0
+
-6
0
6
270
270
Polar Plot
90
8000Hz
10000Hz
12500Hz
16000Hz
180
270
AP-5102 Technical Drawing
1675 MacArthur Boulevard • Costa Mesa, CA 92626 • Ph: 800/854-4079 or 714/957-7100 • Fax: 714/754-6174
please recycle
© 2012 QSC Audio Products, LLC. All rights reserved. QSC and the QSC logo are registered
trademarks of QSC Audio Products, LLC in the U.S. Patent and Trademark office and other
countries. DMT is a trademark of QSC. Speakon is a registered trademark of Neutrik
AP-5102 Spec Sheet 12/12/2012
|