Q See Digital Peripheral Solutions Cable Box qsdr44drtc User Manual

Quick Installation Guide  
4 Channel H.264 Compression DVR with  
(CIF) Real-Time Recording and  
4 Color CCD Camera Kits  
MODEL QSDR44DRTC  
Q-SEE QUICK INSTALLATION GUIDE  
MODEL NUMBER QSDR44DRTC  
PART 2 - DVR CAMERA AND POWER CONNECTIONS  
(Figure 1)  
1. Connect one end of the 60 Ft. extension cables to the cables that are connected to the cameras.  
2. Connect the other end of the 60 Ft. extension cable to the DVR as illustrated in Figure 1.  
3. Following the illustration in Figure 1, plug the power connecter of the 60 Ft. extension cable to the 4  
way splitter. Repeat steps 1 through 3 for each camera.  
4. Plug the end of the camera power adapter into the 4 way splitter.  
5. Plug the power adapter into the surge protector. Repeat steps 1-4 until all cameras are connected to  
a power adapter.  
6. Plug the power adapter for the DVR into the back of the DVR as illustrated in Figure 1.  
7. Plug the power chord of the power adapter into the surge protector.  
8. Plug the surge protector in to an electricity outlet.  
Please note that it is STRONGLY recommended to use a surge protector that is UL-1449 rated.  
Look for a clamping voltage of 330 or lower, a Joule rating of at least 400 and a response time of  
10 nanoseconds or less.  
2 | P a g e  
Q-SEE QUICK INSTALLATION GUIDE  
MODEL NUMBER QSDR44DRTC  
PART 4 - CONNECTING THE DVR TO YOUR TV  
1. Plug the BNC to RCA adapter in to Video Out port then connect the RCA cable (not included) to the DVR.  
2. Connect the other end of the RCA cable to the Video Input on the TV if you are using a television screen.  
3. If you are using a PC monitor, plug the VGA cable (not included) to the VGA port on the DVR.  
4. Connect the other end of the VGA cable to the monitor.  
PART 5 - DVR CONTROLS: FRONT PANEL  
1. Channel Selector, Quad Mode  
6. Pause  
11. Select/Edit, Right  
12. Down  
13. Power Light  
14. Infrared Sensor  
15. HDD Power Light  
2. Record  
7. Rewind  
3. Stop  
8. PTZ Button  
4. Forward  
9. Menu/Escape, Left  
5. Play  
10. Up  
3 | P a g e  
Q-SEE QUICK INSTALLATION GUIDE  
MODEL NUMBER QSDR44DRTC  
PART 6 - ACCESSING THE DVR MENUS  
Choose MENU by right clicking on the mouse or by pushing the MENU button  
on the DVR front panel or remote control.  
The Main Menu offers the following Setup Features:  
CAMERA: Setup name display, position, image view, and record quality of each  
channel (cameras).  
RECORD: Enable recording & audio, set resolution & quality, recording mode  
and file size.  
NETWORK: Setup Network access (Remote Internet Monitoring).  
SEARCH: Find files for playback and backup.  
DEVICES: Manage & Format hard drive and USB devices, setup alarms, PTZ  
cameras, mobile phone access and motion detection.  
SYSTEM: Setup time, date, password, and video mode.  
PART 7 - SETTING UP CAMERAS FOR VIEWING AND RECORDING  
From the Main menu, select CAMERA. Here you can setup the name display  
(up to 8 characters) and position of each channel (cameras). Select COLOR  
SETUP to adjust the image brightness, saturation, contrast and hue settings  
for each channel (camera). You can also choose whether each channel can be  
previewed in LIVE MODE and/or RECORDING MODE.  
PART 8 - TO START RECORDING  
This System offers 3 modes for recording:  
1. Manual 2. Time Schedule 3. Motion Detection.  
From the main menu, select RECORD to enter into the Record Setup  
menu (shown at right).  
CHANNEL: “ON” enables video to record from the respective camera. If  
the channel is set to “OFF”, video from that channel will not record.  
RESOLUTION: D1=704x480, HD1=704x240, CIF=352x240  
QUALITY: Best, Good, Normal  
Using higher resolution and quality settings results in better video quality, but takes up more space on the hard drive.  
Choosing lower settings result in lower video quality, but takes up less space on the hard drive.  
AUDIO: If audio is ENABLED sound will be recorded with the video from the channels, and will have audio output in  
playback mode. If audio is DISABLED, sound will not record, and there will be no audio output in playback mode  
(Audio cameras or a microphone is required to record the sound).  
REC MODE: Sets DVR to record on Manual, Motion Detection, and Time Schedule Recording (detailed instructions  
below).  
PACK TIME: Choose the time length of all recorded files: 15, 30, 45, 60 min.  
(Max = 60 min)  
4 | P a g e  
Q-SEE QUICK INSTALLATION GUIDE  
MODEL NUMBER QSDR44DRTC  
Grid Explanation:  
Red = Alarm (motion detection) recording  
Green = General (time schedule) recording  
Transparent = No recording  
Blue = The channel and date selected.  
Manual Recording:  
From the Record Setup screen set the Rec Mode to “ALWAYS”. Your DVR will continuously record and separate files will be  
created with the Pack Time intervals you selected.  
Time Schedule Recording:  
From the Record Setup screen, set the Rec Mode to “TIME SCHEDULE RECORD” and click “SCHEDULE” in green. This  
will display the Schedule menu (see below image). Select the channels (cameras) that you wish to record on a  
schedule. The options are: All, CH-1, CH-2, CH-3, and CH-4 respectively. The channel you select will be highlighted in  
“Blue”, and the unselected channels will be “Grey. Click on the green GENERAL option box then click on the boxes for  
the days and times that you want to record using this option on the timeline. You can use the [From – To] pull-down  
menus and COPY button to copy settings from one day to another day, or all days. Your DVR will record on it’s Time  
Schedule, and separate files with the Pack Time Interval you selected. Click APPLY to activate your customized  
schedule, and then reboot the DVR.  
You can also click on the DEFAULT button to use the system defaults. The system default settings are:  
Hr 01:00 am-07:59 am : No recording  
Hr 08:00 am-18:59 pm : General recording (Time Schedule)  
Hr 19:00 pm- 00:59 am : Alarm recording (Motion Detection)  
Motion Detection Recording:  
From the Record Setup screen, set the Rec Mode to “TIME SCHEDULE RECORD” and click “SCHEDULE” in green. This will  
display the Schedule menu (See picture above). The options are: All, CH-1, CH-2, CH-3, and CH-4 respectively. The  
channel you select will be highlighted in “Blue”, and the unselected channels will be “Grey. Click on the red ALARM  
option box then click on the boxes for the days and times that you want to record using this option on the timeline. You  
can use the [From – To] pull-down menus and COPY button to copy settings from one day to another day, or all days.  
Your DVR will record on Motion Detection. Click APPLY to activate your customized schedule, and then go to the Devices  
option (red box in first below picture) and select the Motion Option (red box in second picture below), which will display  
the Motion Detect Box.  
4 | P a g e  
Q-SEE QUICK INSTALLATION GUIDE  
MODEL NUMBER QSDR44DRTC  
The Motion detection Menu has three sections, including  
Channel Status, Sensitivity and Motion area.  
STATUS: This option allows you enable motion detection on  
any channel.  
SENSITIVITY: This option allows you to set sensitivity level  
of motion detection from 1 to 4, with 4 being the highest.  
Next, click on the MD AREA SETUP button, which will display the picture on  
the left. This option allows you to select the area you want to be sensitive  
to motion. The area in red is sensitive to motion. You can set this area by  
using the mouse or REV, FWD, and SEL keys on the front panel. Once you  
have set the area, right click with the mouse or push the ESC key to save  
the setting. After you have set all of the cameras, click on the Apply button  
to save the settings.  
PART 9 - SETTING UP THE DVR TO PLAYBACK  
Searched Playback:  
From the Main Menu select SEARCH to display the Video Search  
Menu shown to the right. If you input a specific date and click  
Search, you will find all the recordings for that day. When you select  
an item, you will playback the recordings in 4 channel mode; or, click  
[File list] button to display File list interface, where you can playback  
or backup the file you selected. See File List heading below.  
In the playback window you can play video Forward at 2x, 4x, and 8x speeds, Slow play at 1/2x, 1/4x, and 1/8x, or normal  
play, pause and play frame by frame using the playback control bar, and adjust volume by clicking or sliding tune control  
bar. When playback has finished, system will return to previous menu.  
File List:  
On the Video search menu mode, click File list to display the sub-  
menu shown in the picture on the left.  
This option will allow you to view all of the available files by channel  
and type (all, normal, or alarm).  
You can select a file and push the SEL button to playback the file, or  
use the FWD button and down button to select the backup option and  
backup the recorded file you selected. You can also put a checkmark  
in the BAK box at the end of multiple files if you want to backup more  
than one file. See section 5.2.4 Search Recordings in the User Manual  
for more information on using the File List option.  
5 | P a g e  
Q-SEE QUICK INSTALLATION GUIDE  
MODEL NUMBER QSDR44DRTC  
PART 10 - BACKING UP THE VIDEO ON THE DVR  
Attach a USB flash drive or USB hard drive to the USB backup port and follow the instructions in Part 8 to go to the File List  
in the Search menu.  
If you want to backup a single recorded file from the file list, from the File List dialog box pictured above, select the file you  
wish to back up by placing a check mark in the accompanying green box and hit the [BACKUP] button on the right of the  
screen. You will then receive a pop up screen as illustrated in Picture 22 showing you the progression of your backup. Once  
backup is complete, you will then receive a pop up message informing you that you have backed up your files successfully  
(see picture below). Note that all files will be in an H264 format that can be converted to AVI using the Multi Player  
program that comes with the DVR or through the net-viewer program. Once converted, you can then view these files  
through any program that supports an AVI format.  
6 | P a g e  
Q-SEE QUICK INSTALLATION GUIDE  
MODEL NUMBER QSDR44DRTC  
Questions or Comments?  
Contact Us:  
Mailing Address:  
DPS, Inc.  
8015 E. Crystal Dr.  
Anaheim, CA 92807  
Customer Service:  
Phone: 877-998-3440 x 538  
Live Chat from our Website  
Website:  
Fax:  
Tech Support:  
Phone: 877-998-3440 x 539  
Live Chat from our Website  
714-998-3509  
REVISED 1/5/2010  
7 | P a g e  

Rockford Fosgate ADDENDUM B050 000 User Manual
Pioneer DCS 353 User Manual
Olympus digital camera T 100 User Manual
Nikon Nikkor 1855mmf3556G User Manual
Lochinvar 286 User Manual
Kramer Electronics Camcorder Tr 1 User Manual
Kenwood KDC MP533V User Manual
Kenwood DDX5022 User Manual
JVC KW ADV792 User Manual
JVC KD LHX557 User Manual