Polaroid PDM 2727M User Manual

7” Two Screen Car Portable DVD Player  
PDM-2727M  
User’s Manual  
20060628  
Important Safety  
Instructions  
CAUTION: These servicing instructions are for use by qualified service personnel only.  
To reduce the risk of electric shock, do not perform any servicing other than that  
contained in the operating instructions unless you are qualified to do so.  
Refer to service manual for servicing instructions.  
1) Read these instructions.  
2) Keep these instructions.  
3) Heed all warnings.  
4) Follow all instructions.  
5) Do not use near water.  
6) Clean only with dry cloth.  
7) Do not block any ventilation openings. Maintain well ventilated conditions around the  
product, Do not put product on bed, sofa or anything that blocks ventilation. Install  
in accordance with the manufacturer’s instructions.  
8) Do not install near any heat sources such as radiators, heat registers, stoves, or  
other apparatus (including amplifiers) that produce heat.  
9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized  
plug has two blades with one wider than the other. A grounding type plug has two  
blades and a third grounding prong. The wide blade or the third prong is provided for  
your safety. If the provided plug does not fit into your outlet, consult an electrician for  
replacement of the obsolete outlet.  
10) Protect the power cord from being walked on or pinched particularly at plugs,  
convenience receptacles, and the point where they exit from the apparatus.  
11) Only use attachments/accessories specified by the manufacturer.  
12) Use only with the cart, stand, tripod, bracket, or table specified by  
the manufacturer, or sold with the apparatus. When a cart is used,  
use caution when moving the cart/apparatus combination to avoid  
injury from tip-over.  
13) Unplug this apparatus during lightning storms or when unused for long periods of  
time.  
14) Refer all servicing to qualified service personnel. Servicing is required when the  
apparatus has been damaged in any way, such as power-supply cord or plug is  
damaged, liquid has been spilled or objects have fallen into the apparatus, the  
apparatus has been exposed to rain or moisture, does not operate normally, or has  
been dropped.  
15) Apparatus shall not be exposed to dripping or splashing and no objects filled with  
liquids, such as vases, shall be placed on the apparatus.  
Note: Do not touch the color TFT LCD screen by hand directly.  
2
Important Safety  
Instructions  
Copyright Protection  
This product incorporates copyright protection technology that is protected by U.S.  
patents and other intellectual property rights. Use of this copyright protection technology  
must be authorized by Macrovision, and is intended for home and other limited viewing  
uses only unless otherwise authorized by Macrovision. Reverse engineering or  
disassembly is prohibited.  
IMPORTANT FOR LASER PRODUCTS  
1. CLASS 1 LASER PRODUCT  
2. DANGER: Visible laser radiation when open and  
interlock failed or defeated. Avoid direct exposure to  
beam.  
3. CAUTION: Do not open the top cover. There are no  
user serviceable parts inside the unit. Leave all  
servicing to qualified service personnel.  
Region code information  
DVD players and discs are coded by region. If the region number described on the DVD  
disc does not correspond to the region number of this product, this product cannot play  
the disc. The region code of this unit is 4.  
3
Features  
High-quality audio and video  
Excellent sound: Dolby Decoder  
delivers great sound.  
AV Out: Analog audio output and  
video output.  
Advanced Playing Functions  
Compatibility: Compatible with  
DVD, CD and JPEG.  
On-screen Display: You can  
choose English, French or Spanish  
for the On-screen Display language.  
Particular  
Multi-speed, fast forward, fast  
backward and slow forward.  
Performance:  
Search by Time: Search for  
certain track of a disk by selected  
time.  
a
Last  
Memory  
Playback:  
Special  
screen aspect ratio changing,  
screen saver, multi-languages  
subtitle, multi-angles etc. functions.  
Functions:  
Supports  
Memorizes the stopped playback  
track and continues playing the disk  
from this spot when the power is  
kept to supply. (Only available for  
DVD and CD disc).  
4
Accessories  
Accessories List  
ITEM  
NAME  
QTY  
1
Remote Controlwith battery)  
Power Adapter  
Car Adapter  
1
1
1
Power Supply Cord  
Strap  
4
Earphone  
2
1
Game handle  
Audio/Video Cable  
Owner’s Manual  
2
1
NOTE  
Accessories and their parts numbers are subject to modification without prior notice due  
to improvements.  
5
Contents  
Important Safety Instructions  
Features  
…………………………………………..1  
…………………………………………...4  
…………………………………………...5  
…………………………………………...7  
…………………………………..……….9  
…………………………………………..11  
…………………………………………..12  
…………………………………………..14  
…………………………………………..15  
…………………………………………..17  
…………………………………………..18  
…………………………………………..19  
…………………………………………..20  
Accessories  
View of Front Panel  
View of Side Panels  
View of Main Unit Bottom  
View of Remote Control  
Battery Installation for RC  
System Connections  
Power Supply Preparation  
Notes on Discs  
Playback Operation  
DVD Playback  
CD Playback  
…………………………………………..24  
…………………………………………..26  
…………………………………………..28  
…………………………………………..32  
JPEG Playback  
System Setup  
Use of Straps  
Definitions  
…………………………………………..34  
…………………………………………..35  
…………………………………………..37  
Troubleshooting  
Specifications  
6
View of Front Panel  
1.  
2.  
(PLAY/PAUSE) button  
Press once to pause the playback, and press it again to resume the playback.  
(Stop) button  
Press to stop playback. Then press the  
button to resume playback from the  
stopped spot. Press this button twice to stop playback completely.  
SLOW button  
3.  
4.  
5.  
6.  
Press to activate the slow playback function.  
A-B Repeat button  
Press to play a certain selected segment repeatedly.  
TITLE button  
Press to access to or exit from the title menu if it exists in the disc.  
MENU button  
Press to access to or exit from the menu.  
7
View of Front Panel  
7.  
8.  
9.  
/button  
Press to select different options, or to return to the previous list, track or chapter.  
/button  
Press to select different options, or to search forward fast.  
/button  
Press to select different options, or to search backward fast.  
10. /button  
Press to select different options, or to skip to the next list, track or chapter.  
11. Setup button  
Press to enter the player’s system setup.  
12. ENT button  
Press to access playback, or confirm your selection.  
13. AUDIO button  
Press to select different languages when a DVD disc which contains multiple audio  
languages is played. Press to select different audio track when a CD disc is played.  
14. -/+ button  
Press to adjust the value of brightness and color.  
15. FUNC button  
Press the FUNC button to change the brightness and color level. Press and hold  
for 1-2 seconds to change the aspect ratio.  
16. Speaker  
17. Remote Control Sensor  
18. LCD Screen  
8
View of Side Panels  
Right Side View  
1. Volume Control  
Used to adjust the volume of the headphone and speaker.  
2. Headphone Jack  
Used to connect headphones for private listening. When the headphones are  
connected to this jack, the speaker will be turned off automatically.  
3. Audio Output Jack  
Used to connect to an external amplifier.  
4. Video Output Jack  
Used to connect to an external monitor.  
5. DC 9.5V Input Jack  
Used to connect the power adapter, including the car adapter.  
6.  
7.  
OPEN Switch  
Push to open the disc tray cover.  
Disc tray cover  
When the disc is loaded gently press the cover to close it.  
9
View of Side Panels  
Left Side View  
1. Headphone Jack  
Used to connect headphones for private listening. When the headphones are  
connected to this jack, the speaker will be turned off automatically.  
Power Switch  
2.  
Used to turn the power on or off.  
10  
View of Main Unit Bottom  
1. Rechargeable Battery Contacts  
For connecting the rechargeable battery pack.  
11  
View of Remote Control  
1. MUTE button  
Press to turn off or on the speaker output.  
2. INFO button  
Press repeatedly to display or conceal the detailed information of the disc during  
playback.  
3. TITLE button  
Press to access to or exit from the title menu if it exists in the disc.  
4. Direction button  
Press to select different options.  
5. ENTER button  
Press to access playback or confirm your selection.  
6. SETUP button  
Press to enter the player’s setup menu.  
7. 0-9 number buttons  
Press to select number.  
12  
View of Remote Control  
8. NEXT button  
Press to skip to the next list, track or chapter.  
9. PREV button  
Press to return to the previous list, track or chapter.  
10. SUBT button  
When playing a DVD coded with multi-subtitles, press to select a subtitle language  
or to turn subtitles off.  
11. ANGLE button  
Press to access various camera angles if the DVD disc contains multiple camera  
angles.  
12. A-B button  
Press to play a section of the disc from point A to point B. Press once to select the  
starting point A, press again to select the end point B. During A-B repeat playback,  
press this button to stop the repeat.  
13. ZOOM button  
Press to realize various zoom functions.  
14. REP button  
Press to repeat a chapter, title, the entire disc or close this function.  
15. MENU button  
Press to access to or exit from the menu during playback.  
16. PAUSE button  
Press to pause playback. Press the PLAY button to resume normal playback.  
17. STOP button  
Press to stop playback. Then press the PLAY button to resume playback from the  
stopped spot. Press this button twice to stop playback completely.  
18. PLAY button  
Press to start playback.  
19. +10 button  
Press this button first and then the additional number buttons as needed to select  
number greater than 9.  
20. GOTO button  
Press to select the desired title, chapter or playback start time.  
21. REV SCAN button  
Press to search backward fast during playback.  
22. FWD SCAN button  
Press to search forward fast during playback.  
23. SLOW button  
Press to activate slow playback function.  
24. AUDIO button  
Press to select different languages when a DVD disc with multiple audio languages  
is played. Press to select different audio track when a CD disc is played.  
13  
Battery Installation for  
Remote Control  
Installation Steps  
Follow the steps below to install the battery.  
Step1: Pull the battery holder out from the remote  
control in the direction of the arrow.  
Step 2: Load a new battery properly with  
the (+) side up.  
Step3: Insert the battery holder back into  
the remote control.  
Battery Property  
Battery Type: CR2025 3V  
Battery Life: Approximately 1 year under normal use (at room temperature).  
Caution  
1.  
Improper use of the battery may cause overheating, explosion or ignition, which  
can result in an injury or fire. Battery leakage may damage the remote control.  
2. Do not expose the remote control unit to direct sunlight.  
3. Do not recharge, disassemble, deform or heat the battery.  
4. Do not put the battery in fire or water.  
5.  
Immediately replace the exhausted battery.  
14  
System Connections  
z
z
Always ensure that the DVD player, TV and any other electrical equipment to be  
connected with are switched off and unplugged from the power supply.  
Ensure that you observe the color coding when connecting audio and video  
cables.  
Connecting to TV  
Audio/Video connections  
Follow the drawings below to connect the DVD player to TV's Audio/Video inputs with  
Audio/Video cables.  
15  
System Connections  
Connecting to Amplifier  
Refer to your Audio equipment's manual before connection.  
Follow the drawings below to connect the DVD player to AV amplifier.  
Connecting to Headphones  
Connect the headphones to the right side of the player for private listening.  
When headphone is connected, the speakers will automatically turn off.  
16  
Power Supply Preparation  
Using the AC Adapter  
The player is supplied with an AC adapter for powering the unit and charging the battery.  
1. Connect AC adapter to the right side  
of the DVD player in the jack marked  
DC 9.5V IN, as shown on the right.  
2. Plug the other end of the power cord  
into the wall AC outlet.  
NOTE: Turn player's power off before unplugging.  
Using of Car Adapter  
The player is supplied with a Car Adapter for powering the unit while in a vehicle.  
Connect the Car Adapter Power Plug to  
the unit’s power jack and plug the other  
end to the vehicle’s cigarette socket, as  
shown right.  
Attention  
¾
¾
¾
Do not operate the unit or view video software while driving a vehicle.  
Place the unit in a proper position for viewing.  
Disconnect the player from the Car Adapter when starting the vehicle.  
17  
Notes on Discs  
Compatible Disc Formats  
PLAYBACK TIME/  
DISC LOGO  
DIAMETER  
PLAYABLE SIDES  
133 min (SS-SL)  
242 min (SS-DL)  
266 min (DS-SL)  
484 min (DS-DL)  
41 min (SS-SL)  
75 min (SS-DL)  
82 min (DS-SL)  
150 min (DS-DL)  
12cm  
8cm  
DVD  
12cm  
8cm  
74 min  
20 min  
CD  
JPEG  
12cm  
Operation methods of some DVD discs are specified by the software manufacturer.  
Please follow the instructions of those discs.  
Care of Discs  
Holding Discs  
When loading or removing discs, do not touch their playing surfaces as  
the right figure.  
Cleaning  
Fingerprints or stain on the disc may affect the quality of sound and  
picture. To clean your discs, use a soft clean cloth to wipe them. If  
necessary, moisten a soft cloth with diluted neutral detergent to remove  
heave dirt or fingerprints.  
Do not wipe in a circular direction as the figure in the right middle  
(concentric scratches on the disc groove tend to cause noise). Gently  
wipe from the center of the disc to the outer edge as the right figure.  
18  
Playback Operation  
READ THE FOLLOWING INSTRUCTIONS CAREFULLY BEFORE USING YOUR DVD  
PLAYER FOR THE FIRST TIME.  
WARNING: Do not play poor-quality discs to avoid damaging the lens.  
Pre-operation  
1. Connect the unit to power supply through the provided AC adaptor.  
2. Switch “POWER ON/OFF” to “ON” on the left panel to turn on the DVD player.  
3. Press OPEN button on the unit to open the disc tray cover, put a disc in the disc tray  
with printed side facing up. Close the disc cover. (See below)  
4. The player will read the disc automatically.  
5. Adjust the volume with the VOLUME control on the right panel to the desired level.  
6. To turn the player off, switch the “POWER ON/OFF” on the left panel to “OFF”.  
Using of General Button  
Press the FUNC button to change the brightness and  
color level. Adjust these values with + and - buttons on  
FUNC button  
the front panel. Press and hold the FUNC button for  
about 1 or 2 seconds to change the aspect ration  
between 16:9 and 4:3. See the below for details:  
19  
Playback Operation  
DVD Playback  
Buttons Operation  
Press the ENTER/ENT button to start playback; press  
the ꢄꢅꢆꢇ direction buttons to select a title/chapter to  
play or use 0-9 buttons to select directly.  
ENTER/ENT  
button  
Press the PAUSE/  
step frame by frame playback, and press the PLAY/  
button to resume normal playback.  
button to pause playback or start  
PAUSE/  
button  
During playback, press the Stop/button once to stop  
playing, then press the PLAY/ button to resume normal  
playback from the stopped point. Press the STOP/ꢈ  
button twice repeatedly to stop playback completely.  
Then press the PLAY/ button and the player will play  
from the beginning.  
STOP/ꢈ  
button  
Press the ZOOM button repeatedly to shift among 1X,  
2X, 3X zooming effects and normal playback.  
ZOOM button  
A-B Button  
Press the A-B button once to set the starting point A,  
press it again to set the end point B. Then the player will  
play the segment between A and B continuously. Press  
this button a third time to stop the A-B repeat.  
20  
Playback Operation  
DVD Playback (continued)  
Press the TITLE button during playback. The title menu  
will appear on the screen.  
TITLE button  
Press the ꢄꢅꢆꢇ direction buttons to select the  
title/chapter to play, and press the ENTER/ENT button to  
confirm your selection. Or press the 0-9 buttons to select  
directly.  
Press the MENU button during playback. The root menu  
will appear on the screen.  
Press the ꢄꢅꢆꢇ direction buttons to select the  
title/chapter to play, and press the ENTER/ENT button to  
confirm your selection. Or press the 0-9 buttons to select  
directly.  
MENU button  
Press the button to go to the previous chapter.  
Press the button to play the next chapter.  
&buttons  
Press the button to start fast forward playback. Press it  
repeatedly to fast forward at the speed of 2X, 4X, 8X, 16X  
and normal playback in sequence. Press the button to  
fast backward. Press it repeatedly to fast backward at the  
speed of 2X, 4X, 8X, 16X and normal playback in  
sequence.  
&buttons  
Press the PLAY/ button to resume normal playback.  
21  
Playback Operation  
DVD Playback (continued)  
Press the SLOW button repeatedly, and the slow  
playback will be undergoing at the speed of 1/2, 1/4,  
1/6, 1/8 and normal playback in sequence. Press the  
PLAY/ button to resume normal playback during slow  
playback.  
SLOW button  
Press the INFO button to display or conceal the detailed  
information.  
INFO button  
DVD discs can contain up to 8 audio bit streams. For  
example: English, French etc.  
To select the audio bit stream you prefer, press the  
AUDIO button during playback. The DVD player will play  
the next audio bit stream if exists every time you press  
the AUDIO button in succession.  
AUDIO button  
NOTE: This function is available for DVD discs recorded  
multi-audio languages.  
When a DVD disc is playing, press the SUBT button to  
select a subtitle language or to turn the subtitle off. A DVD  
disc can be recorded with up to 32 subtitles.  
Press the SUBT button repeatedly, the mode of subtitles  
will recycle as follows:  
SUBTITLE 1/N: Subtitle 1 appears on the screen.  
SUBTITLE 2/N: Subtitle 2 appears on the screen.  
SUBTITLE */N: Subtitle * appears on the screen  
SUBTITLE OFF: No subtitle.  
SUBT button  
“N” refers to the total number of subtitles that the current  
disc contains.  
NOTE: This function is available for DVD discs recorded  
with multi-subtitles  
22  
Playback Operation  
DVD Playback (continued)  
Press the REP button to repeat a Chapter, Title or  
cancel the repeat in sequence.  
REP button  
Press the ANGLE button to play the disc in multi-angle.  
Multi-angle means that a scene is shot from different  
angle so that audience can watch from any angle, like the  
drawings below:  
ANGLE button  
If there are multiple angles in a scene, you can use the  
ANGLE button to select the angle you like to enjoy. Press  
the ANGLE button repeatedly to view from different  
angle.  
NOTE: This function is only available for the DVD disc  
that coded with multi-angles.  
Press the GOTO button to select desired disc title,  
chapter or time.  
Use the ꢆꢇ direction buttons to highlight Title, Chapter  
or Time.  
GOTO button  
Use the 0-9 number buttons to input numbers of the  
desired title, chapter or time and press the ENTER/ENT  
button to confirm. Then the player will begin playing from  
the selected title, chapter or time.  
Press the button again to cancel the item.  
23  
Playback Operation  
CD Playback  
When a CD disc is loaded, the player will read the disc. Then a playback menu will  
appear on the screen and the player will play the disc automatically by the default  
sequence of the disc. You can use the ꢀ ꢃ buttons to select the desired track. Or press  
the number buttons to input the number of the desired track first and then press the  
ENTER/ENT button to confirm to play.  
Buttons Operation  
Press the PAUSE/  
and press the PLAY/  
playback.  
button to pause during playback,  
button to resume normal  
PAUSE/  
button  
During playback, press the Stop/button once to stop  
playing and press the PLAY/ button to resume normal  
playback from the stopped point. Press the STOP/ꢈ  
button twice repeatedly to stop playback completely.  
Then press the PLAY/ button and the player will play  
from the beginning.  
STOP/ꢈ  
button  
Press the button to start fast forward playback. Press it  
repeatedly to fast forward at the speed of 2X, 4X, 8X, 16X  
and normal playback in sequence. Press the button to  
fast backward. Press it repeatedly to fast backward at the  
speed of 2X, 4X, 8X, 16X and normal playback in  
sequence.  
&buttons  
Press the PLAY/ button to resume normal playback  
during fast playback.  
Press the button to go to the previous chapter.  
Press the button to play the next chapter.  
&buttons  
24  
Playback Operation  
CD Playback (continued)  
Press the REP button to repeat signal, folder or cancel  
the repeat in sequence.  
REP button  
A-B Button  
Press the A-B button once to set the starting point A,  
press it again to set the end point B. Then the player will  
play the segment between A and B continuously. Press  
this button a third time to stop the A-B repeat.  
Press the GOTO button to select desired track, track time  
or disc time.  
Use the ꢆꢇ direction buttons to highlight Track, Time or  
Disc Time.  
GOTO button  
Use the 0-9 number buttons to input the desired numbers  
of track or time. And press the ENTER/ENT button to  
confirm. Then the player will begin playing from the  
selected track or time.  
Press it repeatedly to cancel the item.  
Press the AUDIO button to select desired sound effect.  
Press it repeatedly, the display will be as follows:  
Left Right Mix Stereo  
AUDIO button  
25  
Playback Operation  
JPEG Playback  
Pre-operation  
1.  
2.  
Load a JPEG in the disc tray, the player will read the disc automatically.  
The screen displays the root folder with several subdirectories/subfolders. Press  
the ENTER/ENT button to enter. Use the ꢆꢇ buttons to select a desired folder  
and press the ENTER/ENT button to confirm your selection.  
3.  
4.  
The screen enters the selected subfolder with several pictures. Press the ꢆꢇ  
buttons to select the desired picture and press the ENTER/ENT button to enter the  
playback.  
Press the ꢆꢇ buttons to highlight  
, then press the ENTER/ENT button to  
return to the last folder or directory.  
NOTE: Many discs have other items besides pictures.  
Filter and Repeat setup  
Under the folder mode, press the direction buttons to highlight “Filter” and you can  
change its settings according to the steps below:  
1.  
2.  
3.  
4.  
Press the ENTER/ENT button to enter the setup menu.  
Press the ꢆꢇ button to select the item you want to set.  
Press the ENTER/ENT button to select or cancel.  
Press the button to exit.  
Under the folder mode, press the direction buttons to highlight “Repeat” and press  
ENTER/ENT button repeatedly to change its setting. You can also press the REP button  
on the remote control to change its setting.  
Button Operation  
Press the Stop/button to return to the folder during  
STOP/ꢈ  
playback. Press the PLAY/ button to return to normal  
button  
playback.  
Press the PAUSE/  
and then press the PLAY/ button to resume normal  
playback.  
button to pause during playback,  
PAUSE/  
button  
26  
Playback Operation  
JPEG Playback (continued)  
During playback, press the button to go to the  
previous picture; press the button to go to the next  
&buttons  
picture.  
Press the REP button to repeat single, folder or cancel  
the repeat in sequence.  
REP button  
Picture Rotate  
During browsing a picture, you can use the direction buttons to rotate the current  
picture.  
f
Press the button to rotate the current picture 90° clockwise, as shown below:  
Press the button to rotate the current picture 180° clockwise, as shown below:  
Press the button to rotate the current picture 270° clockwise, as shown below:  
27  
System Setup  
You can change the default settings of this unit to customize its performance to your own  
preference. Read this section to learn how to set up the system.  
Follow the steps below to set up your system:  
1.  
2.  
Press the SETUP button and the setup menu will appear on the screen.  
Press the ꢆ ꢇ buttons to select a sub-menu that you want to set up and press the  
button to enter the menu.  
3. Press the button to return to the previous menu. Or press the SETUP button  
again at any time during the setting to exit from the setup menu.  
Language setup  
Press the SETUP button and press the ꢆ ꢇ  
buttons to select Language. The screen will  
display as shown left.  
1. OSD language  
This item is used to set the OSD (on-screen  
display) language.  
Press the ꢆ ꢇ buttons to highlight this item.  
Press the ENTER/ENT or button to enter the  
setup of this item.  
There are several languages for you to choose.  
Press the ꢆ ꢇ buttons to choose the proper  
one. Press the ENTER/ENT button to confirm  
your selection and return.  
28  
System Setup  
Language setup (continued)  
2. Subtitle  
This item is used to set the subtitle language.  
Press the ꢆ ꢇ buttons to highlight this item.  
Press the ENTER/ENT or button to enter the  
setup of this item.  
There are several items for you to choose.  
Press the ꢆ ꢇ buttons to choose the proper  
one. Press the ENTER/ENT button to confirm  
your selection and return.  
3. Audio  
This item is used to set the audio output  
language.  
Press the ꢆ ꢇ buttons to highlight this item.  
Press the ENTER/ENT or button to enter the  
setup of this item.  
There are several languages for you to choose.  
Press the ꢆ ꢇ buttons to choose the proper  
one. Press the ENTER/ENT button to confirm  
your selection and return.  
4. DVD menu  
This item is used to set the disc menu language.  
Press the ꢆ ꢇ buttons to highlight this item.  
Press the ENTER/ENT or button to enter the  
setup of this item.  
There are several languages for you to choose.  
Press the ꢆ ꢇ buttons to choose the proper  
one. Press the ENTER/ENT button to confirm  
your selection and return.  
29  
System Setup  
Video setup  
Press the SETUP button and press the ꢆ ꢇ  
buttons to select Video. The screen will display  
as shown left.  
1. Aspect Ratio  
This item is used to set aspect ratio.  
Press the ꢆ ꢇ buttons to highlight this item.  
Press the ENTER/ENT or button to enter the  
setup of this item.  
Press the ꢆ ꢇ buttons to choose 4:3 or 16:9.  
Press the ENTER/ENT button to confirm your  
selection and return.  
NOTE: Select 4:3 when a 4:3 TV is connected.  
Select 16:9 when a 16:9 wide screen TV is  
connected.  
2. View Mode  
This item is used to set the video mode of the  
unit screen display.  
Press the ꢆ ꢇ buttons to highlight this item.  
Press the ENTER/ENT or button to enter the  
setup of this item.  
There are several items for you to choose.  
Press the ꢆ ꢇ buttons to choose the proper  
one. Press the ENTER/ENT button to confirm  
your selection and return.  
30  
System Setup  
Misc setup  
Press the SETUP button and press the ꢆ ꢇ  
buttons to select Misc. The screen will display as  
shown left.  
1. Use Default Settings  
This item is used to reset the unit to the default.  
Press the ꢆ ꢇ buttons to highlight this item.  
Press the ENTER/ENT or button to enter the  
setup of this item.  
Use the ꢄꢅ buttons to choose Yes or No and  
press the ENTER/ENT button to confirm  
Choose Yes, all the setting of the unit will return  
to the default status; choose No, it will return.  
2. Screen saver  
This item is used to set screen saver On or Off.  
Press the ꢆ ꢇ buttons to highlight this item.  
Press the ENTER/ENT or button to enter the  
setup of this item.  
Press the ꢆ ꢇ buttons to choose On or Off.  
Press the ENTER/ENT button to confirm your  
selection and return.  
31  
Usage of straps  
Follow the steps below to fix the DVD Player onto the of a car seat headrest.  
1. Place the DVD player on a soft and smooth surface with the bottom facing up.  
2. Loose the strap and remove the buckle from the strap.  
3. Insert the strap through the holes as the Fig.1. Make sure the inside of the strap  
faces up.  
4. Thread the strap into the buckle as Fig.2 and Fig.3. After threading, make sure the  
outside of the buckle faces up.  
32  
Usage of straps  
5. Repeat these steps for the other strap.  
6. Adjust the length of the strap according to the backrest of the seat.  
7. Fasten the straps on the headrest of the seat as in Fig.4. Make sure the two straps  
are between the headrest support rods (if your car has them).  
NOTE: The drawings show the outside and the inside of the buckle and the strap.  
33  
Definitions  
Letterbox screen  
This refers to a screen on which the playback picture of wide-screen DVDs appears with black  
bands running along the top and bottom.  
Pan & Scan screen  
This refers to a screen on which the playback picture of wide-screen DVDs is cut off at  
the left and right sides.  
Title, Chapter (DVD)  
DVDs are divided into some large sections (titles) or some small sections (chapters). Each  
section is numbered: these numbers are called "Title number" or "Chapter number".  
Title 1  
Title 2  
Chapter 1  
Chapter1  
Chapter2  
……  
……  
Track (CD)  
CDs are divided into some sections (tracks). Each section is numbered; these numbers are  
called "Track number".  
Track 1  
Track 2  
Track 3  
……  
JPEG  
JPEG is a common picture format that has  
small file size and low quality loss rate of  
picture. Hundreds of pictures can be stored  
in a disc in this format. In order to utilize real  
digital album, use film to make a "PICTURE CD"  
in JPEG format.  
34  
Troubleshooting  
Take steps described in the tables below to solve simple problems before contacting  
after-sales service.  
If You Suspect Something Wrong, immediately turn the power off.  
Disconnect the power connector and check that there is neither smoke nor heat from the unit  
before asking for repairs. Never try to repair the unit by yourself because it is dangerous to do  
so.  
PROBLEM  
POSSIBLE CAUSE  
POSSIBLE SOLUTION  
The disc cover may not be Close the disc cover.  
closed.  
There may not be any discs Put a disc in to the DVD drive.  
in the DVD drive.  
The disc may not be put in Put the disc in with the label  
with the right way.  
side up.  
The player cannot  
play.  
The disc may be dirty or Clean or change the disc.  
warped.  
Make sure the player's  
The player's region code  
region code is the same as  
may not as the same as the  
the region code of DVD  
region code of DVD disc.  
disc.  
There may be water on the Remove the disc and keep  
lens.  
the player being powered off  
for at least two hours.  
The system connection may  
be not correct.  
Connect  
correctly.  
the  
system  
The speaker may not be  
turned on.  
Turn on the speaker.  
There is no sound  
Setup the sound of the DVD  
correctly.  
The sound setup of the DVD  
disc may be not correct.  
The disc may be dirty or  
warped.  
Clean or change the disc.  
35  
Troubleshooting  
PROBLEM  
POSSIBLE SOLUTION  
POSSIBLE CAUSE  
The LCD may be off or not  
be in correct video mode.  
Turn on the LCD and choose  
the correct video mode.  
The system connection may  
be not correct.  
Connect  
correctly.  
the  
system  
There is no picture.  
The unit may be not in AV  
out mode.  
Switch AV tab on the bottom  
of the unit to out.  
The disc may be dirty or  
warped.  
Clean or change the disc.  
Poor AV performance.  
There may be some  
obstructions between the  
remote control and the  
player.  
Remove the obstruction  
between the remote control  
and the player.  
The remote control may not  
be pointed at the player.  
Point the remote control at  
the player directly.  
The remote control  
does not work  
Make sure the polarity of  
each battery is correct.  
The batteries of remote  
control may not be inserted  
correctly.  
Replace the batteries.  
The batteries of remote  
control may be out of power  
or weak.  
Other possibilities:  
Static or other external interference may cause the player function abnormally. In order to  
recover normal status, unplug the power-supply cord and then plug it into the outlet again to  
reset the player. If the problems still exist, cut off the power supply and consult your service  
center or the qualified technician.  
36  
Specifications  
TFT screen size  
Laser Wavelength  
7 inches  
780/650 nm  
NTSC  
Video System  
Frequency Response  
Audio Signal-to-noise Rate  
Audio distortion+noise  
Channel Separation  
Dynamic Range  
20Hz20kHz  
±2.5dB  
85dB  
≤-70dB (1kHz)  
70dB (1kHz)  
80dB (1kHz)  
Output Level: 1.5V±01..02 , Load: 10K  
Analog Audio  
Audio Out  
Video Out  
Out  
Output Level: 1VP-P±0.2, Load: 75Ω  
Video Out  
Unbalanced Negative  
Power  
Power Consumption  
Dimensions  
AC 120V  
< 25W  
230mmX154mmX40mm (L*W*D)  
About 0.85kg  
Weight  
DESIGN AND SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE  
Manufactured under license from Dolby Laboratories.  
“Dolby” and the double-D symbol are trademarks of Dolby Laboratories.  
Confidential unpublished works. © 1992 -1997 Dolby Laboratories, Inc.  
All rights reserved.  
For service, support and warranty information, visit www.polaroid.com.  
"Polaroid" and “Polaroid and Pixel” are trademarks of Polaroid Corporation, Waltham, MA, USA.  
37  

RCA SMALL WONDER EZ217SL User Manual
Pioneer DEH 1200MP User Manual
Pelco Camera Lens 13FF8D 4PAK User Manual
Panasonic PALMCODER PV L657 User Manual
Panasonic HCX920K User Manual
Nikon 7x50CF User Manual
Mustang Survival Commander Rescue Suit IC9001 U GD User Manual
MB QUART REF480 User Manual
Kenwood KDC X9006U User Manual
JVC KS FX911 User Manual