Planar Systems Car Video System LX1201PTI User Manual

Mariner  
LX0801PTI/ LX1201PTI/ LX1501PTI  
IP-65 Touch Monitors  
USER’S GUIDE  
Table of Contents  
Usage Notice  
Precautions.................................................................................................................................... 5  
In a Watercraft or Vehicle...................................................................................................... 5  
Cleaning the Monitor............................................................................................................. 5  
Introduction  
About the Product ...................................................................................................................... 6  
Front View .................................................................................................................................. 6  
Rear View with Connector Information........................................................................... 7  
Features....................................................................................................................................... 8  
Package Overview....................................................................................................................... 9  
Installation  
Before Installing.........................................................................................................................10  
Step 1 - Mounting the Monitor ........................................................................................11  
Step 2 - Connecting the Monitor.....................................................................................12  
Step 3 - IRtouch Software Installation ...........................................................................13  
User Controls  
Front Panel Controls.................................................................................................................17  
Turning the Monitor On and Off..........................................................................................18  
Using the Touchscreen............................................................................................................18  
Navigating the Touchscreen..................................................................................................18  
Cleaning the Monitor...............................................................................................................18  
Appendix  
Troubleshooting the Monitor ...............................................................................................20  
Specifications ............................................................................................................................21  
LX0801PTI/ LX1201PTI/ LX1501PTI - IP-65 Touch Monitors User’s Guide (020-0982-00A)  
3
Addendum A.................................................................................................................................... 24  
USB Control of OSD Functions............................................................................................... 24  
Addendum B ................................................................................................................................... 24  
Wiring the IP-67 sealed field installable connector manufactured by LTW  
(p/n LTWCD-07 BFFA-LL 7001) .............................................................................................. 24  
Addendum C ................................................................................................................................... 25  
Mechanical Drawing for LX0801 PTI- (not available at time of print)...................... 25  
Addendum D ................................................................................................................................... 25  
Mechanical Drawing for LX1201PTI..................................................................................... 25  
Addendum E .................................................................................................................................... 26  
Mechanical Drawing for LX1501PTI..................................................................................... 26  
Addendum F .................................................................................................................................... 27  
CPU Power Switch Scheme..................................................................................................... 27  
Direct 8-30 VDC Power Scheme ............................................................................................ 27  
Addendum G ................................................................................................................................... 28  
RAM Mount for LX0801PTI...................................................................................................... 28  
Addendum H ................................................................................................................................... 29  
Frequently Asked Questions .................................................................................................. 29  
Support and Service...................................................................................................................... 30  
4
LX0801PTI/ LX1201PTI/ LX1501PTI - IP-65 Touch Monitors User’s Guide (020-0982-00A)  
Usage Notice  
WARNING – Please do not open or disassemble the product as this may  
cause electric shock. Doing so will void the warranty.  
!
!
ATTENTION – Do not plug the touchscreen in yet! Install the touchscreen  
driver first!  
Precautions  
To maximize the life and safe use of your unit, always be sure to follow the  
warnings, precautions and maintenance recommendations in this user’s guide.  
In a Watercraft or Vehicle:  
• The monitor should be visible to the driver only if it is used for navigation, or  
system control. Care should be taken to ensure distraction does not occur.  
• Review all applicable federal, state and local laws and regulations to make sure  
the monitor is used properly and safely.  
• Avoid using the monitor for extended times while the charging system is not  
running, or the monitor could drain the watercraft’s battery.  
Cleaning the Monitor:  
• Use a soft cloth moistened with mild detergent, isopropyl alcohol, or window  
cleaners to clean the display housing.  
• Never use abrasive cleaners, waxes or solvents to clean the unit.  
LX0801PTI/ LX1201PTI/ LX1501PTI - IP-65 Touch Monitors User’s Guide (020-0982-00A)  
5
Introduction  
About Planar’s Mariner Touch Monitors  
The LX0801PTI, LX1201PTI and LX1501PTI are high-performance, rugged touch  
monitors intended for demanding environments, such as those aboard a watercraft.  
The monitors feature a AMLCD TFT display with IR touchscreen, bright enough to  
be read in daylight. The monitors include several mounting points for front or rear  
mounting. The monitors are to be powered directly from circuit breaker protected  
and switched 8-32 VDC power aboard the watercraft. The metal enclosure is IP-65,  
designed to withstand liquid and dust intrusion. An optional cosmetic bezel is  
included with each monitor.  
1
3
2
Front Views:  
1. AMLCD TFT with Touchscreen  
2. Auxiliary power switch  
3. Brightness adjust/auto sync buttons  
6
LX0801PTI/ LX1201PTI/ LX1501PTI - IP-65 Touch Monitors User’s Guide (020-0982-00A)  
1
2
3
Rear View (Descriptions):  
1. USB port (Type B) for connecting the touchscreen to the remote computer  
2. VGA Signal Input  
3. 8-32 VDC Internally Regulated Power Input  
4. Modular, removable connector plate for customizing I/O (not available on 12"  
model at time of print)  
Mating Connectors (sourced from http://www.ltw-tech.com):  
USB Cable Assembly: 1 to 5 meter available. LTWWUB-20BFM-A7Axx (01, 02,  
...05 for meter length)  
VGA: The VGA connector located inside the monitor is waterproof.  
The connector style is standard 15-pin VGA.  
DC Power Connector Only: LTWCD-07BFFA-LL 7001  
DC Cable Assembly: LTWCD07AFFM-LL7Axx (01, 02, ... 99 meter length)  
LX0801PTI/ LX1201PTI/ LX1501PTI - IP-65 Touch Monitors User’s Guide (020-0982-00A)  
7
Features  
• Brightness control allows you to easily adjust the display to match the  
ambient light, from full sunlight to night.  
• The monitor’s TFT display is optically bonded to the Touchscreen to  
increase contrast ratio. Increased contrast ratio makes it easier to  
read information displayed on the monitor.  
• The monitor’s autosync function eliminates the need for adjusting the  
monitor for the best image - the monitor automatically makes any needed  
adjustments whenever it is powered up or the display mode is changed.  
• The monitor supports standard VGA signal input:  
• LX0801PTI is 800 x 600 SVGA (native) and 640 x 480.  
• LX1201PTI and LX1501PTI are 1024 x 768 XGA (native), 800 x 600 and  
640 x 480.  
• The monitor’s IP-65 enclosure protects from splashed water and dust. It  
is designed to withstand shock and vibration for greater endurance and  
reliability.  
• There are several mounting point features incorporated in the design of  
the enclosure to enable installation flexibility.  
Note: The LX0801PTI/LX1201PTI/LX1501PTI monitors do not have OSD controls  
available from the front buttons. All OSD commands can be controlled via USB  
cable from the host CPU (see Addendum A).  
8
LX0801PTI/ LX1201PTI/ LX1501PTI - IP-65 Touch Monitors User’s Guide (020-0982-00A)  
Package Overview  
The following items are shipped with the display. If any of these items are not in the  
shipping container, please contact Planar.  
LX080PTI/ LX1201PTI/ LX1501PTI  
Quick Start Guide  
2M Power Cord  
Touch Monitor  
(Bezel is attached for shipping.)  
Note: Mounting hardware (M4 Screws), mounting brackets, power supply,  
USB and video cables are sold separately.  
LX0801PTI/ LX1201PTI/ LX1501PTI - IP-65 Touch Monitors User’s Guide (020-0982-00A)  
9
Installation  
Before Installing  
Keep the following in mind while installing the monitor:  
• The monitor should be visible to the driver only if it is used for navigation,  
system control or vehicle information. If the monitor will be used for other  
purposes, it should be installed in such a way that it will only operate while the  
watercraft is not moving.  
• Review all applicable federal, state and local laws and regulations to make sure  
the monitor is used properly and safely.  
• The installed monitor must not interfere with the driver’s vision.  
Installing the monitor consists of three steps:  
1. Attaching the monitor using one of the mounting interfaces built into the  
monitor’s enclosure.  
2. Connecting the monitor to the computer and power source.  
3. Installing the touchscreen driver software.  
10  
LX0801PTI/ LX1201PTI/ LX1501PTI - IP-65 Touch Monitors User’s Guide (020-0982-00A)  
Step 1 - Mounting the Monitor  
The back and sides of the monitor include mounting points that you can use to  
mount the monitor as your installation requires.  
Mounting holes on the LX0801PTI, LX1201PTI and LX1501PTI allow the monitor  
to be mounted :  
• Front mounted using corner mounting holes (1)  
• Rear mounted using either VESA, 3 hole RAM style, or edge  
mounting holes (2, 3)  
• Side mounted using variegated bosses (4)  
1
2
4
3
Mounting  
Front  
Details  
LX0801PTI  
n/a  
LX1201PTI LX1501PTI  
Non-Tapped Holes in Flange Clearance for M4  
4 Holes  
6 Holes  
Rear  
VESA 4 Hole Pattern  
Accepts M4 x .07 up to 8mm depth  
75mm  
100mm  
n/a  
100mm  
n/a  
3 Hole RAM Mount Style  
(Addendum G)  
Accepts M4 x .07 up to 8mm depth (0.91 radius, 120°)  
Edge of Rear Casting  
Accepts M4 x .07 up to 8mm depth  
n/a  
n/a  
8 Holes  
Yes  
4 Holes  
n/a  
Side  
Variegated Mounting Boss  
Accepts M8 x 1.25 up to 8mm depth  
NOTE: Planar does not supply fasteners.  
Removing Bezel:  
• If you are flange mounting the monitor, it  
will be necessary to remove the decorative  
bezel from the enclosure. As shown, insert a  
narrow straight blade screw driver between  
the bezel and enclosure near one of the  
friction points. Pry upwards gently.  
LX0801PTI/ LX1201PTI/ LX1501PTI - IP-65 Touch Monitors User’s Guide (020-0982-00A)  
11  
Step 2 - Connecting the Monitor  
Once the monitor is mounted in place, connect it to the computer (or other  
video source) and the regulated DC power supply as follows. Planar does not supply  
a power supply. The monitor is intended to be powered from the watercraft’s DC  
power system. Power to the monitor (and CPU) is hard switched from the line power  
that should be protected by a magnetic hydraulic circuit breaker. DO NOT connect  
the USB cable at this time!  
Note: This procedure refers to connections to and from the computer.  
However, depending on your particular hardware configuration, these  
connections may be to a dock or other device rather than directly to  
the computer.  
1. Install IRtouch software on computer.  
2. As needed, route any data and power cables from the computer to the  
monitor.  
3. Make sure the computer is turned off . Connect video cable and USB cable.  
4. Connect to the monitor’s power supply.  
Note: Use a appropriately sized fuse in line to the power source. Also, to  
prevent the watercraft’s battery from draining in standby mode, you  
should install a device that shuts off power to the monitor while the  
monitor is inactive. (An example is Lind Electronic’s Vehicle Battery  
Voltage Shutdown Timer - www.lindeletronic.com).  
12VDC system: 4A slow blow fuse  
24VDC system: 2A slow blow fuse  
5. Turn on power to the computer and monitor. The monitor then turns on as  
soon as it receives a video signal from the computer, and its LED turns green.  
Also, the first time the monitor is powered up, it automatically displays a test  
pattern of repeating colored screens (black, white, red, green, and blue) until a  
video signal is detected.  
Note: For best results, adjust the display mode of the computer to a resolution  
of 800 x 600 (LX0801PTI) or 1024 x 768 (LX1201PTI and LX1501PTI) and a  
refresh rate of 60 Hz.  
12  
LX0801PTI/ LX1201PTI/ LX1501PTI - IP-65 Touch Monitors User’s Guide (020-0982-00A)  
Step 3 - IRtouch Software Installation  
IMPORTANT – Do not plug in the touchscreen yet! Install the driver first.  
!
1. Run IRtouch driver setup  
2. Accept user agreement  
3. Install in default location  
LX0801PTI/ LX1201PTI/ LX1501PTI - IP-65 Touch Monitors User’s Guide (020-0982-00A)  
13  
4. Click Install  
5. Click continue, you can trust Planar and IRtouch  
6. Click on Finish  
Attach the Planar monitor to the system or install the computer to a  
docking station. Attach the USB cable. After the USB cable from the  
monitor is attached to the computer it will recognize the touchscreen for  
the first time.  
14  
LX0801PTI/ LX1201PTI/ LX1501PTI - IP-65 Touch Monitors User’s Guide (020-0982-00A)  
7. Continue  
8. Click Finish  
9. Click the IRtouch icon located on your desktop to calibrate the touch  
monitor.  
10. Click Calibrate  
LX0801PTI/ LX1201PTI/ LX1501PTI - IP-65 Touch Monitors User’s Guide (020-0982-00A)  
15  
11. Set Modes  
When used in rugged environments with software written for touchscreens,  
you may find it easier to use the ‘click on releaseradio button.  
12. Beep  
You can set the computer to beep on touch activation if needed.  
16  
LX0801PTI/ LX1201PTI/ LX1501PTI - IP-65 Touch Monitors User’s Guide (020-0982-00A)  
User Controls  
Front Panel Controls  
3
2
1
CONTROL  
FUNCTION  
Auxiliary Power Switch  
Turns the CPU off and sends signal to host PC through  
power cable.  
Brightness Adjust Switches Enables brightness adjustment by depressing  
one or the other button. Depressing both buttons  
simultaneously enables auto sync of the monitor to  
the video source.  
Touchscreen  
Enables user to control software and computer with a  
touch  
Note: The Mariner design does not have a power switch that turns off the power to  
the monitor. This is because the vast majority of marine installations utilize a  
circuit breaker to turn power on/off to electrical devices.  
LX0801PTI/ LX1201PTI/ LX1501PTI - IP-65 Touch Monitors User’s Guide (020-0982-00A)  
17  
Turning the Monitor On and Off  
The monitor’s power button can control power to the display and CPU. It is  
not designed to electrically isolate the monitor or CPU from the supply. Use  
an appropriately sized (4A slow blow 12VDC/2A slow blow 24VDC) magnetic  
hydraulic circuit breaker to switch line power on/off.  
Note: Be sure to configure the computer’s power options, including how the  
computer responds, when the button is pressed. See Windows on-line  
help for details. The monitor goes into standby whenever the computer is  
put into sleep or into hibernation.  
Using the Touchscreen  
The touchscreen allows you to operate the computer by touching  
the screen with a finger or stylus, rather than using a mouse or keyboard.  
Navigating the Touchscreen  
• To click an item, tap the item once.  
• To double-click an item, tap the item twice rapidly.  
• To drag an item, touch the item, and then drag it along the screen to the  
new location.  
• To move the cursor, touch the screen and move the cursor as needed.  
Cleaning the Monitor  
Clean the monitor’s touchscreen periodically to keep the display image bright  
and sharp, and to keep the touchscreen functions working properly.  
• Always turn off the monitor before cleaning.  
• Clean the touchscreen with a dry soft cloth. If this does not clean  
the screen adequately, preferably use Sparkle or Glass X cleaners.  
18  
LX0801PTI/ LX1201PTI/ LX1501PTI - IP-65 Touch Monitors User’s Guide (020-0982-00A)  
If these optimal cleaners are not available use water or mild glass or window cleaner  
(that does not contain ammonia) applied to the cloth and not to the display.  
• Clean the monitor housing with a soft cloth moistened with mild  
detergent.  
• Never apply abrasive cleaners, waxes or solvents to the monitor.  
LX0801PTI/ LX1201PTI/ LX1501PTI - IP-65 Touch Monitors User’s Guide (020-0982-00A)  
19  
Appendix  
Troubleshooting the Monitor  
If you are experiencing trouble with the monitor, refer to the following. If the  
problem persists, please contact your local dealer or our service center.  
Problem: No image appears on screen  
• Make sure the brightness is not turned all the way down.  
• Make sure all data and power cables are properly connected to the  
monitor and to the computer and power supply.  
• Make sure the pins on the cables and connectors are not crooked or  
broken.  
• Make sure the computer is functioning properly, and has not entered  
power-saving mode. (You may also want to disable the computer’s  
power-saving feature.)  
Problem: Partial image or incorrectly displayed image  
• Make sure the computer’s image resolution is set to one of these  
resolutions: 1024 x 768 (XGA) (LX1201PTI only), 800 x 600 (SVGA) or 640  
x 480 (VGA).  
Problem: Image is scrolling  
• Check and make sure the VGA signal cable (or adapter) is securely  
connected at both ends.  
• Initiate an auto-sync to solve the problem.  
Problem: The monitor does not appear to respond to the touchscreen  
• Make sure the USB cable to the computer is securely connected at both  
ends.  
20  
LX0801PTI/ LX1201PTI/ LX1501PTI - IP-65 Touch Monitors User’s Guide (020-0982-00A)  
Specifications  
Parameter  
LX1501PTI - 15"  
Display Type  
Full Color TFT AMLCD  
304 (w) x 228 (h) mm  
15" (381 mm)  
Display Viewing Area  
Diagonal Viewing Area  
Display Color  
262 K (6 bit/color); 16.7 m (8 bit)  
1024 (H) x 768 (V) pixels XGA  
650:1 (typical)  
Resolution  
Contrast Ratio  
Response Time  
25 ms (on/off)  
Luminance  
1200 Nits (typical)  
80° (right), 80° (left)  
80° (down), 70° (up)  
VGA  
Horizontal Viewing Angle (CR>5)  
Vertical Viewing Angle (CR>5)  
Video Input  
Backlight  
6 CCFLs  
Backlight Adjustment  
Backlight Inverter  
Power Consumption  
0-100% dimmable  
Pizeoelectric, dims to off  
<45 Watts (total), 4.2W standby typical with USB connected;  
3.6W standby typical without USB.  
Touch screen  
Infrared, 4096 points of resolution  
USB  
Touch screen Interface  
Cover Glass  
AG etched, direct bonded  
-40° C to + 60° C  
Operating Survival Temp Range  
Operating Temperature  
Storage Temperature  
Shock  
-20° C to + 60° C  
-20° C to + 80° C  
30 Gs, Half Sine Wave, 11 ms  
10-500 Hz, 2 Gs rms, 1hr/axis  
10-500 Hz, 2 Gs rms, 1hr/axis  
90% RH @ 40° C, Non-condensing  
EN 55022, EN6100-3-2, -3 (targeted standards at time of printing)  
Vibration, Endurance  
Vibration, Operating  
Humidity  
Emission  
Immunity  
IEC 6100-4-2, -3, -4, -5, -6, -8, -11: 1995  
(targeted standards at time of printing)  
Reverse Polarity Protection  
Regulatory and Safety  
Enclosure Including Front Bezel  
Input/Outputs  
Protected  
FCC Class A, CE, UL/CUL, TUV  
IP-65 (Waterproof)  
Power On/Off Button  
Dimming/Auto Sync rocker switch  
Watertight USB “B”Type  
Watertight VGA 15-Pin  
Watertight Power Connector (LTW p/n LTWCD-07BFFA-LL7001  
is field installable mating connector)  
Weight with Plastic Bezel  
12.35 lbs (5.62 kg)  
LX0801PTI/ LX1201PTI/ LX1501PTI - IP-65 Touch Monitors User’s Guide (020-0982-00A)  
21  
Parameter  
LX1201PTI - 12.1"  
Display Type  
Full Color TFT AMLCD  
246 (w) x 184.5 (h) mm  
12.1" (307 mm)  
Display Viewing Area  
Diagonal Viewing Area  
Display Color  
262 K (6 bit/color); 16.7 m (8 bit)  
1024 (H) x 768 (V) pixels XGA  
650:1 (typical)  
Resolution  
Contrast Ratio  
Response Time  
25 ms (on/off)  
Luminance  
>800 Nits (typical)  
65° (right), 65° (left) (CR>1)  
80° (down), 70° (up) (CR>1)  
VGA  
Horizontal Viewing Angle (CR>5)  
Vertical Viewing Angle (CR>5)  
Video Input  
Backlight  
4 CCFLs  
Backlight Adjustment  
Backlight Inverter  
Power Consumption  
0-100% dimmable  
Pizeoelectric, dims to off  
<30 Watts (total), 4.2W standby typical with USB connected;  
3.6W standby typical without USB.  
Touch screen  
Infrared, 4096 points of resolution  
USB  
Touch screen Interface  
Cover Glass  
AG etched, direct bonded  
-40° C to + 60° C  
Operating Survival Temp Range  
Operating Temperature  
Storage Temperature  
Shock  
-20° C to + 60° C  
-20° C to + 80° C  
18 Gs, SAE J1455  
100-1100 Hz, 4 Gs rms, 1hr/axis  
5-150 Hz, 4 Gs rms, 1hr/axis  
95% RH, Non-condensing  
-
Vibration, Endurance  
Vibration, Operating  
Humidity  
Emission  
Immunity  
-
Reverse Polarity Protection  
Regulatory and Safety  
Enclosure Including Front Bezel  
Input/Outputs  
Protected  
FCC Class A, CE, UL/CUL, TUV  
IP-65 (Waterproof)  
Power On/Off Button  
Dimming/Auto Sync rocker switch  
Watertight USB “B”Type  
Watertight VGA 15-Pin  
Watertight Power Connector (LTW p/n LTWCD-07BFFA-LL7001  
is field installable mating connector)  
Weight with Plastic Bezel  
8.65 lbs (3.92 kg)  
22  
LX0801PTI/ LX1201PTI/ LX1501PTI - IP-65 Touch Monitors User’s Guide (020-0982-00A)  
Parameter  
LX0801PTI - 8.4"  
Display Type  
Full Color TFT AMLCD  
170 (w) x 127 (h) mm  
8.4" (213 mm)  
Display Viewing Area  
Diagonal Viewing Area  
Display Color  
262 K (6 bit/color); 16.7 m (8 bit)  
800 (H) x 600 (V) SVGA  
650:1 (typical)  
Resolution  
Contrast Ratio  
Response Time  
-
Luminance  
700 Nits (typical)  
80° (right), 80° (left)  
60° (down), 80° (up)  
VGA  
Horizontal Viewing Angle (CR>5)  
Vertical Viewing Angle (CR>5)  
Video Input  
Backlight  
2 CCFLs  
Backlight Adjustment  
Backlight Inverter  
Power Consumption  
0-100% dimmable  
Pizeoelectric, dims to off  
<15 Watts (total), 4.2W standby typical with USB connected;  
3.6W standby typical without USB.  
Touch screen  
Infrared, 4096 points of resolution  
USB  
Touch screen Interface  
Cover Glass  
AG etched, direct bonded  
-40° C to + 70° C  
Operating Survival Temp Range  
Operating Temperature  
Storage Temperature  
Shock  
-20° C to + 60° C  
-20° C to + 85° C  
18 Gs, SAE J1455  
100-1100 Hz, 4 Gs rms, 1hr/axis  
5-150 Hz, 4 Gs rms, 1hr/axis  
95% RH, Non-condensing  
-
Vibration, Endurance  
Vibration, Operating  
Humidity  
Emission  
Immunity  
-
Reverse Polarity Protection  
Regulatory and Safety  
Enclosure Including Front Bezel  
Input/Outputs  
Protected  
FCC Class A, CE, UL/CUL, TUV  
IP-65 (Waterproof)  
Power On/Off Button  
Dimming/Auto Sync rocker switch  
Watertight USB “B”Type  
Watertight VGA 15-Pin  
Watertight Power Connector (LTW p/n LTWCD-07BFFA-LL7001  
is field installable mating connector)  
Weight with Plastic Bezel  
4.8 lbs (2.2 kg)  
LX0801PTI/ LX1201PTI/ LX1501PTI - IP-65 Touch Monitors User’s Guide (020-0982-00A)  
23  
Addendum A  
An interconnection to the host PC with USB can be exploited by the customer to  
create an OSD. Planar has utilized a powerful Pixelworks video IC to enable this  
functionality should customers desire increased control functions. Planar does  
not provide the programming to do this. Please consult with Planar’s application  
engineering team if you have questions about the scale of this undertaking.  
Contact [email protected].  
Addendum B  
Monitor is not provided with a power supply brick. The AC/DC power supply is  
not required in DC powered vehicle applications. The power brick is available as  
an optional accessory should one be required in AC powered applications.  
Power source:  
DC power or optional  
universal input (110-  
240VAC) AC/DC supply.  
Pins 4 and 5 are the switch connections. These are connected to our front bezel  
button so when the button is depressed these signals will be shorted together for  
as long as you hold the button. When you release the button the connection will  
be open.  
24  
LX0801PTI/ LX1201PTI/ LX1501PTI - IP-65 Touch Monitors User’s Guide (020-0982-00A)  
Addendum C  
Note, this manual has been published prior to the release of LX0801PTI, please  
consult factory for additional information.  
Addendum D  
325  
247 (TOUCH SCREEN OPENING)  
BRIGHNESS  
CONTROL  
186  
(TOUCH  
SCREEN  
262  
OPENING)  
35  
61  
75  
REMOTE CPU POWER SWITCH  
(NOT DISPLAY POWER)  
142  
25  
275.0  
100.0  
4X M4x0.7  
MOUNTING HOLES  
7MM MIN THREAD  
DEPTH  
112  
8X M4x0.7  
MOUNTING HOLES  
7MM MIN THREAD  
DEPTH  
2X M8.0x1.25  
10MM MIN THREAD  
DEPTH  
210.0  
100.0  
FEATURE ALLOWS  
FOR TILTING AND  
LOCK DOWN  
MOUNTING. SEE  
CAD DATA.  
135.0  
75.0  
A
81  
26  
67  
VGA CONNECTOR  
LOCKING POWER  
TOUCH SCREEN  
CONNECTOR  
USB TYPE B  
LTWHDB-15PFFP-SA8001  
INPUT CONNECTOR  
LTWCD-07PMMS-LC7001  
POSSIBLE MATING CABLES  
LTWHDB-15AMMM-SL7A02 (2m LONG)  
LTWHDB-15AMMM-SL7A05 (5m LONG)  
LTWUB-20PMFP-SC8002  
POSSIBLE MATING CABLE  
LTWCD-07AFFM-LL7A02 (2m LONG)  
POSSIBLE MATING CABLES  
LTWUB-20BFM-A7A02 (2m LONG)  
LTWUB-20BFM-A7A05 (5m LONG)  
FIELD INSTALLABLE CONNECTOR  
LTWHDB-15BMMA-SL7001  
FIELD INSTALLABLE CONNECTOR  
LTWCD-07BFFA-LL7001  
LX0801PTI/ LX1201PTI/ LX1501PTI - IP-65 Touch Monitors User’s Guide (020-0982-00A)  
25  
Addendum E  
392  
307 (TOUCH SCREEN OPENING)  
BRIGHNESS  
CONTROL  
231  
(TOUCH  
SCREEN  
317  
OPENING)  
64  
90  
104  
REMOTE CPU POWER SWITCH  
(NOT DISPLAY POWER)  
171  
28  
336.0  
100.0  
4
X
M4X0.7  
MOUNTING HOLES  
5.5MM MIN THREAD  
DEPTH  
4
X
M4X0.7  
146  
MOUNTING HOLES  
5MM MIN THREAD  
DEPTH  
100.0  
260  
A
128  
28  
VGA CONNECTOR  
LOCKING POWER  
TOUCH SCREEN  
CONNECTOR  
USB TYPE B  
LTWHDB-15PFFP-SA8001  
INPUT CONNECTOR  
LTWCD-07PMMS-LC7001  
POSSIBLE MATING CABLES  
LTWHDB-15AMMM-SL7A02 (2m LONG)  
LTWHDB-15AMMM-SL7A05 (5m LONG)  
75  
LTWUB-20PMFP-SC8002  
POSSIBLE MATING CABLES  
LTWCD-07AFFM-LL7A02 (2m LONG)  
POSSIBLE MATING CABLES  
LTWUB-20BFM-A7A02 (2m LONG)  
LTWUB-20BFM-A7A05 (5m LONG)  
FIELD INSTALLABLE CONNECTOR  
LTWHDB-15BMMA-SL7001  
FIELD INSTALLABLE CONNECTOR  
LTWCD-07BFFA-LL7001  
26  
LX0801PTI/ LX1201PTI/ LX1501PTI - IP-65 Touch Monitors User’s Guide (020-0982-00A)  
Addendum F  
CPU Power Switch Scheme  
Direct 8-30 VDC Power Scheme  
Pin  
1
Wire Color  
Blue  
Definition  
8-30 VDC to Invertor  
8-30 VDC to Invertor  
8-30 VDC to Video Board  
Ground to Invertor  
Ground to Video Board  
3
Yellow  
6
Green  
2
Orange  
White  
7
LX0801PTI/ LX1201PTI/ LX1501PTI - IP-65 Touch Monitors User’s Guide (020-0982-00A)  
27  
Addendum G  
RAM Mount for LX0801 PTI  
7.35 REF.  
0.22  
0.91 RAD. 120 DEGREES 3 PLACES  
1.50  
2.49  
1.19  
2.44 REF.  
28  
LX0801PTI/ LX1201PTI/ LX1501PTI - IP-65 Touch Monitors User’s Guide (020-0982-00A)  
Addendum H  
Frequently Asked Questions  
Q1: I want to be able to turn power off to the monitor on/off with a switch. I do  
not want the monitor to be in stand-by power mode because it draws power; and,  
I don’t want to use a Vehicle Battery Voltage Shutdown Timer mentioned on page  
12 of this manual. Can I tie the inverter power and video power together in my wire  
harness to switch the power?  
A1: Yes, Pins 1, 3 and 6 can be tied together. Pins 2 and 7 can be tied together.  
Q2: In Addendum F, does pin 3 have to be connected to pin 1?  
A2: No pin 3 was reserved to provide more current capacity for future display family  
growth in either size or brightness.  
LX0801PTI/ LX1201PTI/ LX1501PTI - IP-65 Touch Monitors User’s Guide (020-0982-00A)  
29  
Support and Service  
Planar is a US company based in Beaverton, Oregon and Espoo, Finland, with a  
world-wide sales distribution network. Full application engineering support and  
service are available to make the integration of Planar displays as simple and quick  
as possible for our customers.  
RMA Procedure: For a Returned Material Authorization number, please contact Planar  
Systems, Inc. with the model number(s) and serial number(s). When returning goods  
for repair, please include a brief description of the problem, and mark the outside of  
the shipping container with the RMA number.  
Planar Systems, Inc.  
Customer Service  
Americas Support  
1195 NW Compton Drive  
Beaverton, OR 97006-1992  
Tel: 1-866-PLANAR-1 (752-6271) (US only)  
1-503-748-5799 (outside the US)  
Hours: M-F, 8am - 8pm Eastern Time | 5am - 5pm Pacific Time  
Europe and Asia-Pacific Support  
Olarinluoma 9 PO Box 46  
FIN-02201 Espoo, Finland  
Tel: +358-9-420-01  
Hours: M-F, 7am - 4pm CET  
© 2009 Planar Systems, Inc. 2/09 Planar is a registered trademark of Planar Systems, Inc.  
Other brands and names are the property of their respective owners.  
Technical information in this document is subject to change without notice.  
Document No. 020-0982-00A  
30  
LX0801PTI/ LX1201PTI/ LX1501PTI - IP-65 Touch Monitors User’s Guide (020-0982-00A)  

PYLE Audio View Series PLTVD7IN User Manual
Pioneer XDV P9 User Manual
Philips AQ 6482 User Manual
Panasonic NV GS25GN User Manual
Panasonic AGDVC30E5 User Manual
Olympus PEN E PL3 User Manual
Nokia HDW 2 User Manual
Newcon Optik NSN_ 5855 20 000 8284 NVS 7 User Manual
Kenwood KVT727DVD User Manual
Kenwood DDX7037 User Manual