Pioneer Car Video System DVH P4390UB User Manual

Owners Manual  
DVD RECEIVER  
DVH-P4390UB  
English  
Section  
Section  
01  
Before you start  
Operating this unit  
02  
DVD video disc region numbers  
To ensure safe driving  
Head unit  
CAUTION  
Only DVD video discs with compatible region  
numbers can be played on this player. You can  
find the region number of the player on the  
bottom of this unit and in this manual (refer to  
Specifications on page 67).  
Use an optional Pioneer USB cable (CD-U50E) to  
connect the USB audio player/USB memory as  
any device connected directly to the unit will pro-  
trude out from the unit and may be dangerous.  
Do not use unauthorized products.  
1 2 3  
4 5  
WARNING  
!
!
!
To avoid the risk of accident and the potential  
violation of applicable laws, the front DVD or  
TV (sold separately) feature should never be  
used while the vehicle is being driven. Also,  
rear displays should not be in a location  
where they are visibly distracting to the driver.  
In some countries or states the viewing of  
images on a display inside a vehicle even by  
persons other than the driver may be illegal.  
Where such regulations apply, they must be  
obeyed and this units DVD features should  
not be used.  
Note  
The function of  
setting of the display connection (refer to V.OUT  
(display connection) on page 30).  
is different depending on the  
About this manual  
6 7 8  
9
a
b
!
Function setting operations are completed  
even if the menu is cancelled before the op-  
erations are confirmed.  
!
In this manual, iPod and iPhone will be re-  
ferred to as iPod.  
Head unit (front panel open)  
NEVER install the display in a location that  
enables the driver to watch images while driv-  
ing.  
c
Visit our website  
Visit us at the following site:  
When you park your car in a safe place and  
apply the parking brake, the picture appears  
on the screen.  
!
We offer the latest information about  
Pioneer Corporation on our website.  
d
In case of trouble  
Should this unit fail to operate properly, please  
contact your dealer or nearest authorized  
PIONEER Service Station.  
Part  
Part  
1
2
S (SRC/OFF)  
(list)  
8
9
a/b/c/d  
(clock)  
1 to 6  
!
1/S.Rtrv/DVD  
MENU  
!
!
!
!
2/PAUSE  
3/BOOKMARK  
4/iPod/AUDIO  
About this unit  
MULTI-CONTROL  
(M.C.)  
3
4
a
CAUTION  
5/  
/SUB  
!
Do not allow this unit to come into contact  
with liquids. Electrical shock could result.  
Also, damage to this unit, smoke, and over-  
heating could result from contact with liquids.  
Always keep the volume low enough to hear  
outside sounds.  
TITLE  
6/ /ANGLE  
!
AUX input jack  
(3.5 mm stereo  
jack)  
USB port  
b
!
5
6
Open button  
c
d
Disc loading slot  
!
!
Avoid exposure to moisture.  
If the battery is disconnected or discharged,  
any preset memory will be erased.  
B (BAND/ESC)  
h (eject)  
(Back/display/  
scroll)  
7
4
5
En  
En  
 
Section  
Section  
02  
Operating this unit  
Remote control  
Operating this unit  
02  
Button names  
DVH mode  
DVD mode  
Switch the operation mode between DVD and DVH modes. Normally, set to DVH.  
For details, refer to Using the remote control operation mode switch on the next  
page.  
1
2 3  
Remote control operation  
mode switch  
8
9
DIRECT  
Press to select tracks (chapters) directly.  
Not used.  
(Only in DVD source)  
PLAY/PAUSE (f)  
Press to pause or resume playback.  
Press to switch sequentially be-  
tween playback and pause.  
4
6
h
g
5
7
(Only in DVD source)  
Press to perform fast reverse.  
REVERSE (m)  
8
(Only in DVD source)  
Press to perform fast forward.  
FORWARD (n)  
f
e
d
c
9
a
(Only in DVD source)  
Press to return to the previous track (chapter).  
10 PREVIOUS (o)  
(Only in DVD source)  
Press to go to the next track (chapter).  
NEXT (p)  
(Only in DVD source)  
STEP (r/q)  
Press to move ahead one frame at a time during DVD/Video CD/DivX playback.  
Press and hold for one second to activate slow playback.  
b
(Only in DVD source)  
Press to stop playback.  
STOP (g)  
Not used.  
Press to select to a desired title  
When pressing DIRECT, press 0 to 10 to  
number on a DVD.  
input numbers. Press CLEAR to clear the  
Press to select a menu item on a  
11 0 to 10, CLEAR  
input numbers. Press 1 to 6 to select the  
video CD featuring PBC (playback  
desired preset station for the tuner.  
control).  
Button names  
VOLUME  
DVH mode  
DVD mode  
Press to select among three FM bands  
and one AM band and to cancel control  
modes of functions.  
Press to switch between media file  
types. (Refer to Switching the media  
file type on page 12.)  
12 BAND/ESC  
1
2
Press to increase or decrease volume.  
Press to mute. Press again to unmute.  
/MUTE  
Press to turn the information display on or off when the video is displayed.  
Depending on the selected source, pressing this button can switch the display in-  
dication.  
Press to cycle through all the available sources. Press and hold to turn the source  
off.  
13 DISP  
3
SRC/OFF  
AUDIO  
(Only in DVD source)  
Press to change the audio language/audio system during DVD/DivX playback.  
14 A.MENU  
15 FUNC  
Press to select various sound quality controls.  
Press to select functions.  
(Only in DVD source)  
Press to change the subtitle language during DVD/DivX playback.  
4
SUBTITLE  
ANGLE  
Functions are the same as a/b/c/d on  
the head unit.  
Use to select a menu on the DVD  
Move to operate fast forward, reverse and  
menu.  
(Only in DVD source)  
Press to change the viewing angle during DVD playback.  
Move the thumb pad  
track search controls. Also used for con-  
16  
trolling functions.  
(Only in DVD source)  
Press to turn the DVD auto-playback function on or off.  
5
6
AUTO PLAY  
RETURN  
Click to display the track title list, folder  
list or file list depending on the source.  
Click to select a menu on the DVD  
menu.  
Click the thumb pad  
(Only in DVD source)  
Press to display the PBC (playback control) menu during PBC playback.  
MENU  
17  
Press to display the DVD menu during DVD playback.  
Press to return to the top menu during DVD playback.  
(Only in DVD source)  
TOP MENU  
Press to turn the bookmark function  
on or off. For details, refer to Resume  
7
BOOKMARK  
Not used.  
playback (Bookmark) on page 15.  
6
7
En  
En  
 
Section  
Section  
02  
Operating this unit  
Operating this unit  
02  
Using the remote control  
operation mode switch  
There are two remote control operation modes  
on the remote control. If you want to operate  
this unit by remote control, select DVH mode.  
In this case, both the head units buttons and  
remote control can control this unit.  
Basic Operations of this unit  
Indicator  
Operation  
Indicator  
Operation  
Appears when Dolby Pro Logic II  
is used. (Activated only when  
Important  
!
!
Tuner: band and frequency  
(Dolby Pro  
Main dis-  
play sec-  
tion  
!
!
!
!
Handle gently when removing or attaching  
the front panel.  
Avoid subjecting the front panel to excessive  
shock.  
Keep the front panel out of direct sunlight and  
high temperatures.  
To avoid damaging the device or vehicle inter-  
ior, remove any cables and devices attached  
to the front panel before detaching it.  
e
Built-in DVD player ,USB sto-  
rage device and iPod: elapsed  
playback time and text infor-  
mation  
Logic II) in- DEQ-P7650 is connected to this  
dicator  
1
unit.)  
Appears when DTS audio is se-  
lected. (Activated only when DEQ-  
P7650 is connected to this unit.)  
(dts)  
indicator  
f
The disc (track) artist name is dis-  
played.  
Artist search refinement of the  
iPod browsing function is in use.  
2
3
(artist)  
(disc)  
Note  
DVH mode operation  
When operating this unit by remote control,  
the mode is normally switched to DVH.  
When you set the display connection (refer to  
V.OUT (display connection) on page 30) to on, the  
indicators of 2 to 7 do not appear.  
The disc (album) name is dis-  
played.  
Album search refinement of the  
iPod browsing function is in use.  
Removing the front panel to protect your unit from  
theft  
DVD mode operation  
If you switch the mode to DVD, the thumb pad  
and 0 to 10 operations are changed for the  
DVD player.  
1
Press the open button to open the front panel.  
Grip the left side of the front panel and pull it  
gently outward.  
Take care not to grip it too tightly or to drop the  
front panel and protect it from contact with water  
or other fluids to prevent permanent damage.  
Always keep the detached front panel in a protec-  
tion device such as a protection case.  
The track (song) name is dis-  
played.  
2
A playable file is displayed during  
viewing the file name list of disc  
and a USB storage device.  
Song search refinement of the  
iPod browsing function is in use.  
4
(song)  
%
When you want to operate the follow-  
3
ing functions, switch the mode to DVD:  
An upper tier of the folder or  
menu exists.  
5
6
c
!
When operating the DVD menu by using  
the thumb pad. (Refer to Operating the DVD  
menu on page 13.)  
Re-attaching the front panel  
1
Reattach the front panel by holding it upright to  
the unit and clipping it securely into the mount-  
ing hooks.  
The list function is being oper-  
ated.  
(list)  
!
!
When operating the PBC menu by using 0  
to 10. (Refer to PBC playback on page 13.)  
When specifying title or track by using 0 to  
10. (Refer to Specifying title on page 13 and  
Specifying track on page 14.)  
A lower tier of the folder or menu  
exists.  
This flashes when a song/album  
related to the song currently play-  
ing is selected from the iPod.  
7
d
!
When operating the DVD setup menu by  
using the thumb pad. (Refer to Setting up  
the DVD player on page 25.)  
8
9
LOC  
Local seek tuning is on.  
The loudness is on.  
Turning the unit on  
Press S (SRC/OFF) to turn the unit on.  
LOUD  
(loudness)  
1
Turning the unit off  
Receiving the stereo broadcast-  
ing.  
a
b
5 (stereo)  
1
Press and hold S (SRC/OFF) until the unit turns  
off.  
Display indication  
(repeat) Track or folder repeat is on.  
Selecting a source  
1
Random play is on.  
1
Press S (SRC/OFF) repeatedly to switch between  
the following sources:  
(ran-  
dom)  
The iPod source is selected and  
the shuffle or shuffle all function  
is on.  
c
d
TUNER (tuner)DVD (built-in DVD player)USB  
(USB storage device)/USB-iPod (iPod connected  
using USB input)EXTERNAL (external unit 1)—  
EXTERNAL (external unit 2)AUX1 (AUX 1)—  
AUX2 (AUX 2)BLUETOOTH (Bluetooth tele-  
phone/audio)  
Appears when Dolby Digital audio  
is selected. (Activated only when  
DEQ-P7650 is connected to this  
unit.)  
(Dolby  
Digital)  
indicator  
4 6 8  
2
3 5 7  
9
ab c d e  
f
Adjusting the volume  
Turn M.C. to adjust the volume.  
1
8
9
En  
En  
Section  
Section  
02  
Operating this unit  
Operating this unit  
Tuner  
02  
Notes  
!
Batteries (battery pack or batteries installed)  
must not be exposed to excessive heat such  
as sunshine, fire or the like.  
LOCAL (local seek tuning)  
!
Listening to the radio while connecting a USB  
storage device to this unit may generate  
noise. In this case disconnect the USB sto-  
rage device.  
When this units blue/white lead is connected  
to the vehicles auto-antenna relay control  
terminal, the vehicles antenna extends when  
this units source is turned on. To retract the  
antenna, turn the source off.  
Local seek tuning lets you tune in to only those radio  
stations with sufficiently strong signals for good re-  
ception.  
Basic operations  
Selecting a band  
1
Press M.C. to display the setting mode.  
Turn M.C. to select the desired setting.  
FM: OFFLEVEL 1LEVEL 2LEVEL 3LEVEL  
4
CAUTION  
1
Press B (BAND/ESC) until the desired band (F1,  
2
!
F2, F3 for FM or AM) is displayed.  
!
!
Use one CR2025 (3 V) lithium battery.  
Remove the battery if the remote control is not  
used for a month or longer.  
There is a danger of explosion if the battery is  
incorrectly replaced. Replace only with the  
same or equivalent type.  
Do not handle the battery with metallic tools.  
Do not store the battery with metallic objects.  
If the battery leaks, wipe the remote control  
completely clean and install a new battery.  
When disposing of used batteries, comply  
with governmental regulations or environmen-  
tal public institutionsrules that apply in your  
country/area.  
Manual tuning (step by step)  
Press c or d.  
1
AM: OFFLEVEL 1LEVEL 2  
!
The highest level setting allows reception of only  
the strongest stations, while lower levels allow the  
reception of weaker stations.  
Seeking  
Press and hold c or d, and then release.  
1
You can cancel seek tuning by briefly pressing c  
or d.  
While pressing and holding c or d, you can skip  
stations. Seek tuning starts as soon as you re-  
lease c or d.  
3
Press M.C. to confirm the selection.  
!
!
!
Use and care of the remote  
control  
!
Using the remote control  
1
Point the remote control in the direction of the  
front panel to operate.  
Storing and recalling stations  
for each band  
When using for the first time, pull out the film  
protruding from the tray.  
Using preset tuning buttons  
Replacing the battery  
1
Slide the tray out on the back of the remote con-  
trol.  
Insert the battery with the plus (+) and minus ()  
poles aligned properly.  
1
When you find a station that you want  
Menu operations identical  
for function settings/audio  
adjustments/initial  
to store in memory, press one of the preset  
tuning buttons (1 to 6) and hold until the  
preset number stops flashing.  
2
settings/lists  
2
Press one of the preset tuning buttons  
(1 to 6) to select the desired station.  
You can also recall stored radio stations by  
Returning to the previous display  
Returning to the previous list (the folder one level  
higher)  
#
pressing a or b during the frequency display.  
1
Press  
.
Important  
Returning to the main menu  
Function settings  
1
Press and hold  
.
!
!
!
Do not store the remote control in high tem-  
peratures or direct sunlight.  
The remote control may not function properly  
in direct sunlight.  
Do not let the remote control fall onto the  
floor, where it may become jammed under the  
brake or accelerator pedal.  
1
Press M.C. to display the main menu.  
Returning to the ordinary display  
Canceling the initial setting menu  
2
Turn M.C. to change the menu option  
1
Press B (BAND/ESC).  
and press to select FUNCTION.  
Turn M.C. to select the function.  
3
After selecting, perform the following proce-  
dures to set the function.  
WARNING  
BSM (best stations memory)  
!
Keep the battery out of the reach of children.  
Should the battery be swallowed, consult a  
doctor immediately.  
BSM (best stations memory) automatically stores the  
six strongest stations in the order of their signal  
strength.  
1
Press M.C. to turn BSM on.  
To cancel, press M.C. again.  
10  
11  
En  
En  
Section  
Section  
02  
Operating this unit  
Operating this unit  
02  
â
on the next page and PBC playback on the  
next page.  
!
If the remote control is set to DVH, g does not  
operate.  
Playing DivX VOD content  
Built-in DVD player  
Basic operations  
Some DivX VOD (video on demand) content may only  
be playable a fixed number of times. When you load a  
disc containing this type of DivX VOD content, the  
number of times you have played is shown on-screen  
and you then have the option of playing the disc  
(thereby using up one of the remaining plays), or  
stopping. If you load a disc that contains expired DivX  
VOD content (for example, content that has zero re-  
maining plays), EXPIRED (THIS DivX RENTAL HAS  
EXPIRED.) is displayed.  
!
When loading a CD/CD-R/RW containing only  
JPEG picture files, this unit automatically  
starts a slideshow from the first folder/picture  
on the disc. The player displays the pictures in  
each folder in alphabetical order.  
If the bookmark function is on, DVD playback  
resumes from the selected point. For more de-  
tails, refer to Resume playback (Bookmark) on  
page 15.  
When you are watching a DVD and attempt to  
perform an operation, it may not be performed  
due to the programming on the disc. When  
this happens, the unit indicates the button  
on the screen.  
Operating the DVD menu  
Open the front panel  
1
Press the open button.  
Disc loading slot appears.  
Some DVDs allow you to make a selection from the  
disc contents using a menu.  
!
!
Playing a disc  
Insert the disc into the disc loading slot with the  
label side up.  
!
!
This function is available for DVD video.  
You can display the menu by pressing the MENU  
or TOP MENU while a disc is playing. Pressing  
MENU again lets you start playback from the lo-  
cation selected from the menu. For details, refer  
to the instructions provided with the disc.  
Ways to display the menu will differ depending on  
the disc.  
1
Ejecting a disc  
Press h.  
!
If there is no limit to the number of times the DivX  
VOD content can be viewed, then you may load  
the disc into your player and play the content as  
often as you like, and no message will be dis-  
played.  
If the message is displayed after loading a disc  
containing DivX VOD content, press f.  
Playback of the DivX VOD content will start.  
To skip to the next file, press p.  
1
Selecting a folder  
!
1
Press a or b.  
You cannot select a folder that does not have a  
compressed audio file, JPEG file or DivX file re-  
corded in it.  
1
2
Press a/b/c/d to select the desired menu op-  
tion.  
Press M.C.  
1
Playback starts from the selected menu item.  
Selecting a chapter/track/file  
1
Press c or d.  
Basic playback controls  
The table below shows the basic controls for  
playing discs. The following chapters cover  
other playback features in more details.  
To return to the previous file, press o.  
If you do not want to play the DivX VOD content,  
press g.  
You can also skip back or forward to another  
chapter/track/file by pressing o or p.  
During PBC playback, a menu may be displayed  
if you perform these operations.  
PBC playback  
Important  
With Video CDs featuring PBC (playback control)  
function, you can operate a menu.  
!
1
Fast forwarding or reversing  
!
!
In order to play DivX VOD content on this unit,  
you first need to register the unit with your  
DivX VOD content provider. About your regis-  
tration code, refer to page 28.  
DivX VOD content is protected by a DRM (Di-  
gital Rights Management) system. This re-  
stricts playback of content to specific,  
registered devices.  
Button What it does  
This function is available for Video CD.  
1
Press and hold c or d.  
Starts playback, pauses a disc thats play-  
When PBC menu is displayed, press 0 to 10 cor-  
responding to a menu number to start playback.  
When the menu is two or more pages long, press  
o or p to switch between displays.  
When DVD, DivX or Video CD is playing, if you  
press and hold c or d for five seconds, the icon  
m or n is highlighted. When this happens,  
fast reverse/fast forward continues even if you re-  
lease c or d. To resume playback at a desired  
point, press f.  
ing or restarts a paused disc.  
Starts the slideshow, pauses the slideshow  
f
or restarts a paused slideshow.  
Stops playback.  
Stopping playback at the point set in Re-  
sume playback.  
Press one more time to stop playback com-  
pletely.  
Notes  
!
You can display the menu by pressing  
g
Returning to root folder  
Press and hold B (BAND/ESC).  
RETURN during PBC playback. For details,  
refer to the instructions provided with the  
disc.  
PBC playback of a Video CD cannot be can-  
celed.  
During playback of Video CDs featuring PBC  
(Playback Control), the following operations  
are not available:  
Search and time search functions  
Selection of a range for repeat play  
1
Switching the media file type  
Specifying title  
m
n
Press and hold to perform fast reverse.  
Press and hold to perform fast forward.  
1
Press B (BAND/ESC) to switch between media file  
!
!
types.  
!
!
This function is available for DVD video.  
To perform this function, set the remote control to  
DVD mode.  
Press 0 to 10 corresponding to a desired title  
number when the disc is stopped.  
!
In case of DVD-R/RW/ROM, this unit does not  
allow playback of audio data (CD-DA) and JPEG  
file.  
Skips to the start of the current track, chap-  
ter or file, then to previous tracks/chapters/  
files.  
o
1
Displays the previous picture.  
Notes  
Title number is displayed for eight seconds and play-  
back starts from the selected title.  
Skips to the next track, chapter or file.  
Displays the next picture.  
!
When the automatic playback function is on,  
p
this unit will cancel the DVD menu and auto-  
matically start playback from the first chapter  
of the first title. Refer to Automatic playback of  
DVDs on page 14.  
!
!
!
To select 3, press 3.  
To select 10, press 10 and 0 in that order.  
To select 23, press 10, 10 and 3 in that order.  
Notes  
!
You may find with some DVD or Video CD  
discs that some playback controls do not work  
in certain parts of the disc. This is not a mal-  
function.  
!
If you are playing a DVD or Video CD, a menu  
may appear. Refer to Operating the DVD menu  
12  
13  
En  
En  
Section  
Section  
02  
Operating this unit  
Specifying track  
Operating this unit  
02  
Slow motion playback  
Displaying text information  
Advanced operations using  
special buttons  
You can use the search function to specify a track to  
search for a desired track.  
This lets you slow down playback speed.  
Selecting the desired text information  
!
This function is available for DVD video, DivX and  
Video CD.  
!
This function is available for CDs and com-  
pressed audio files.  
Operating the DVD menu  
!
!
This function is available for Video CD.  
This function cannot be operated during Video  
CD playback featuring PBC (playback control).  
To perform this function, set the remote control to  
DVD mode.  
1
Press r and hold during playback.  
The icon is displayed, forward slow motion  
playback begins.  
1
Press  
.
Some DVDs allow you to make a selection from the  
disc contents using a menu.  
Scrolling the text information to the left  
!
!
!
This function is available for DVD video.  
You can display the menu by pressing the 1/S.  
Rtrv/DVD MENU while a disc is playing. Pressing  
1/S.Rtrv/DVD MENU again lets you start play-  
back from the location selected from the menu.  
For details, refer to the instructions provided with  
the disc.  
!
This function is available for CDs and com-  
pressed audio files.  
2
Press q or r to adjust playback speed during  
slow motion playback.  
For the numbers to press, please refer to Specifying  
title on the previous page.  
1
Press and hold  
.
Each time you press q or r it changes the  
speed in four steps in the following order:  
1/161/81/41/2  
To return to normal playback, press f.  
You cannot operate this step during DivX play-  
back.  
Notes  
!
Text information items that can be changed  
depend on the media.  
Depending on the version of iTunes used to  
write MP3 files to a disc or media file types, in-  
compatible text stored within an audio file  
may be displayed incorrectly.  
When ever scroll is set to on at the initial set-  
ting, text information scrolls continuously in  
the display. Refer to SCROLL (ever scroll) on  
page 30.  
Searching for the part you  
want to play  
1
2
Press a/b/c/d to select the desired menu op-  
tion.  
Press M.C.  
!
Notes  
You can use the search function to find the part you  
want to play.  
Playback starts from the selected menu item.  
!
!
!
There is no sound during slow motion play-  
back.  
Images during slow motion playback may be  
unclear for some discs.  
Reverse slow motion playback is not available.  
Note  
!
!
!
Chapter search and track search are not possible  
when disc playback has been stopped.  
This function cannot be operated during Video  
CD playback featuring PBC (playback control).  
To perform this function, set the remote control to  
DVH mode.  
!
You can also perform this operation by pressing  
MENU or TOP MENU on the remote control.  
Resume playback (Bookmark)  
1
2
Press DIRECT.  
Press 0 to 9 to input the desired number.  
To cancel the inputted numbers, press CLEAR.  
Press DIRECT.  
Return to the specified scene  
By using the Bookmark function, you can resume  
playback from a selected scene the next time the disc  
is loaded.  
Selecting and playing files/tracks  
from the file name/track title list  
3
You can return to the specified scene where the DVD  
you are currently playing has been preprogrammed  
to return.  
This starts playback from the selected part.  
!
1
This function is available for DVD video.  
During playback, press 3/BOOKMARK at the  
point you want to resume playback next time.  
The selected scene will be bookmarked so that  
playback resumes from that point next time. You  
can bookmark up to five discs. After that, the old-  
est bookmark is replaced by the new one.  
To clear the bookmark on a disc, press and hold  
3/BOOKMARK during playback.  
1
2
Press  
mode.  
to switch to the file name/track title list  
Note  
!
1
This function is available for DVD video.  
Press RETURN to return to the specified scene.  
This function cannot be used if a specified scene  
has not been preprogrammed on the DVD disc.  
With discs featuring a menu, you can also press  
MENU or TOP MENU and then make selections  
from the displayed menu.  
Use M.C. to select the desired file name (or folder  
name).  
Changing title, file or folder name  
Turn M.C.  
1
Playing  
Frame-by-frame playback  
Automatic playback of DVDs  
1
When a file or track is selected, press M.C.  
Notes  
This lets you move ahead one frame at a time during  
playback.  
When a DVD disc with a DVD menu is inserted, this  
unit will cancel the menu automatically and start  
playback from the first chapter of the first title.  
Viewing a list of the files (or folders) in the selected  
folder  
!
You can also perform this operation by press-  
ing BOOKMARK on the remote control.  
To perform this function, set the remote con-  
trol to DVD mode.  
!
This function is available for DVD video, DivX and  
Video CD.  
1
When a folder is selected, press M.C.  
!
!
This function is available for DVD video.  
Some DVDs may not operate properly. If this func-  
tion is not fully operated, turn this function off  
and start playback.  
Playing a song in the selected folder  
1
Press r during playback.  
1
When a folder is selected, press and hold M.C.  
Each time you press r, you move ahead one  
frame.  
To return to normal playback, press f.  
Images during frame-by-frame playback may be  
unclear for some discs.  
!
You can also bookmark a disc by pressing and  
holding h (eject) at the point you want to  
bookmark. Next time you load the disc, play-  
back will resume from the bookmarked point.  
Note that you can only bookmark one disc  
using this method. To clear the bookmark on a  
disc, press h (eject).  
Notes  
1
Press AUTO PLAY to turn automatic playback on.  
A PLAY:ON is displayed.  
!
!
This function is available for JPEG files, CD  
To turn automatic playback off, press AUTO PLAY  
again.  
TEXT, compressed audio files and DivX.  
When the separately sold display is connected  
to this unit, the listed information will appear  
on it.  
14  
15  
En  
En  
Section  
Section  
02  
Operating this unit  
Operating this unit  
02  
Notes  
Changing audio language during  
playback (Multi-audio)  
Changing the subtitle language  
during playback (Multi-subtitle)  
Function settings  
!
You can also perform this operation by press-  
ing ANGLE on the remote control.  
1
Press M.C. to display the main menu.  
With DVDs that provides audio playback in different  
languages and different audio systems (Dolby Digital,  
DTS, etc.), you can switch between languages/audio  
systems during playback.  
With DVDs featuring multi-subtitle recordings, you  
can switch between subtitle languages during play-  
back.  
!
Performing this operation during fast forward/  
fast reverse, pause or slow motion playback  
returns you to normal playback, but the view-  
ing angle does not change.  
2
Turn M.C. to change the menu option  
and press to select FUNCTION.  
Turn M.C. to select the function.  
!
1
This function is available for DVD video and DivX.  
Press 5/ /SUB TITLE during playback.  
3
!
This function is available for DVD video, DivX and  
Video CD.  
After selecting, perform the following proce-  
dures to set the function.  
The subtitle selection icon  
eight seconds.  
is displayed for  
1
Press 4/iPod/AUDIO during playback.  
The audio selection icon is displayed for eight  
seconds.  
Selecting a repeat play range  
2
Press 5/  
/SUB TITLE while the subtitle selec-  
REPEAT (repeat play)  
tion icon is displayed.  
2
Press 4/iPod/AUDIO while the audio selection  
icon is displayed.  
The subtitle language changes each time you  
!
This function is available for JPEG files, CDs and  
compressed audio files.  
!
During PBC (Playback Control) playback, you can-  
not select REPEAT.  
press 5/  
/SUB TITLE.  
The audio changes each time you press 4/iPod/  
AUDIO.  
1
Press 6/ /ANGLE to select the repeat range.  
Notes  
1
2
Press M.C. to display the setting mode.  
Turn M.C. to select a repeat play range.  
For details, refer to Selecting a repeat play range on  
this page.  
!
!
!
!
!
!
TITLE Repeat the current title  
CHAPTER Repeat the current chapter  
TRACK Repeat the current track/file  
FOLDER Repeat the current folder  
DISC Play through the current disc  
During playback of Video CDs featuring PBC  
(Playback Control), this function cannot be  
operated.  
!
!
You can also perform this operation by press-  
ing SUBTITLE on the remote control.  
With some DVDs and DivX, switching between  
subtitle languages may only be possible using  
a menu display.  
Notes  
!
You can also perform this operation by press-  
ing AUDIO on the remote control.  
3
Press M.C. to confirm the selection.  
!
With some DVDs and DivX, switching between  
languages/audio systems may only be possi-  
ble using a menu display.  
You can also switch between languages/audio  
systems using DVD setup menu. For details,  
refer to Setting the audio language on page 25.  
Only digital output of DTS audio is possible. If  
the units optical digital outputs are not con-  
nected, select an audio setting other than  
DTS.  
Display indications such as Dolby D and Mch  
indicate the audio system recorded on the  
DVD and DivX. Depending on the setting, play-  
back may not be with the same audio system  
as that indicated.  
Performing this operation during fast forward/  
fast reverse, pause or slow motion playback  
returns you to normal playback.  
RANDOM (random play)  
!
!
You can also switch between subtitle lan-  
guages using DVD setup menu. For details,  
refer to Setting the subtitle language on page  
25.  
Performing this operation during fast forward/  
fast reverse, pause or slow motion playback  
returns you to normal playback.  
!
This function is available for JPEG files, CDs and  
compressed audio files.  
Press M.C. to turn random play on or off.  
!
!
1
Playing tracks in random order  
LR SELECT (audio output)  
Tracks in a selected repeat range are played in ran-  
dom order.  
!
When playing DVD video discs recorded with LPCM  
audio, you can switch the audio output.  
When playing Video CD discs, you can switch be-  
tween stereo and monaural audio output.  
!
!
!
!
This function is available for JPEG files, CDs and  
compressed audio files.  
1
Press 5/  
/SUB TITLE to turn random play on or  
This function is available for DVD video and Video  
CD.  
This function is not available when disc playback  
is stopped.  
You may not be able to select or use this function  
depending on the disc and the playback location.  
If you select Linear PCM, you can operate this  
function when playing a disc recorded on a dual  
mono mode. (Refer to Setting for digital output on  
page 28.)  
Changing the viewing angle during  
playback (Multi-angle)  
!
!
off.  
With DVDs featuring multi-angle (scenes shot from  
multiple angles) recordings, you can switch among  
viewing angles during playback.  
Pausing playback  
!
!
This function is available for DVD video.  
During playback of a scene shot from multiple an-  
gles, the angle icon  
1
Press 2/PAUSE to pause or resume.  
is displayed. Turn angle  
icon display on or off using the DVD setup menu.  
For details, refer to Setting the angle icon display  
on page 26.  
Enhancing compressed audio and  
restoring rich sound (advanced  
sound retriever)  
1
2
Press M.C. to display the setting mode.  
Turn M.C. to select the desired setting.  
!
!
!
!
L+R left and right  
L left  
R right  
1
2
Press 6/ /ANGLE during playback of a scene  
shot from multiple angles.  
The angle icon  
and angle number are dis-  
!
This function is available for CDs and com-  
pressed audio files.  
Press 1/S.Rtrv/DVD MENU to cycle between:  
OFF (off)12  
1 is effective for low compression rates, and 2 is  
effective for high compression rates.  
MIX mixing left and right  
played for eight seconds.  
3
Press M.C. to confirm the selection.  
Press 6/ /ANGLE while the angle icon and  
angle number are displayed.  
The angle changes each time you press 6/  
/ANGLE.  
1
ROTATION (picture rotation)  
16  
17  
En  
En  
Section  
Section  
02  
Operating this unit  
Operating this unit  
02  
USB portable audio player/  
USB memory  
You can play compressed audio files, DivX and  
JPEG image files stored in a USB storage de-  
vice.  
!
1
This function is available for JPEG files.  
Press M.C. to display the setting mode.  
Turn M.C. to select the desired setting.  
1
Press  
to switch the information display.  
DVD video: Information display 1Information  
display 2Normal playback display  
Video CDs: Information displayNormal play-  
back display  
JPEG files and DivX: Information display—  
Folder name displayFile name displayNormal  
playback display  
CD TEXT discs and compressed audio files:  
Information displayTitle display  
Title display shows the text information of the cur-  
rently playing disc.  
CD TEXT discs: Disc Title (disc title), Disc Ar-  
tist (disc artist name), Track Title (track title),  
Track Artist (track artist name)  
Compressed audio files: Folder Name (folder  
name), File Name (file name), Track Title (track  
title), Artist Name (artist name), Album Title  
(album title), Comment (comment), Bit Rate (bit  
rate)  
2
!
!
!
!
0 Cancel the rotation  
90 Rotate 90 degrees  
180 Rotate 180 degrees  
90 Rotate 90 degrees  
!
For details about compatibility, refer to  
Compressed audio and DivX compatibility  
(disc, USB) on page 62.  
3
Press M.C. to confirm the selection.  
PAUSE (pause)  
Press M.C. to pause or resume.  
!
In the following instructions, USB mem-  
ories and USB audio players are collectively  
referred to as USB storage device.  
!
1
Title display  
S.RTRV (advanced sound retriever)  
1 Disc icon  
Automatically enhances compressed audio and re-  
stores rich sound.  
!
!
When playing a disc containing various  
data format, MIXED appear on it.  
Basic operations  
This function is available for CDs and compressed  
audio files.  
2 Media indicator  
3 Title/Folder number indicator  
DVD: shows the title currently playing.  
Compressed audio, JPEG files and DivX:  
shows the folder currently playing.  
4 Chapter/track/file number indicator  
DVD: shows the chapter currently playing.  
Video CD and CD: shows the track currently  
playing.  
Playing files on a USB storage device  
1
2
Press M.C. to display the setting mode.  
Turn M.C. to select the desired setting.  
Refer to Enhancing compressed audio and restor-  
ing rich sound (advanced sound retriever) on the  
previous page.  
1
Open the USB port cover and plug in the USB  
storage device using a USB cable.  
Stopping playback of files on a USB storage device  
Notes  
!
1
You may disconnect the USB storage device at  
any time.  
3
Press M.C. to confirm the selection.  
Text information on the Title display does not  
scroll.  
Selecting a folder  
Press a or b.  
!
When a Video CD featuring the PBC (playback  
control) function starts playing, PLAYBACK  
CONTROL ON will be displayed instead of  
track number indicator and play time in-  
dicator.  
1
Switching the information display  
Compressed audio, JPEG files and DivX:  
shows the file currently playing.  
5 Play time indicator  
Fast forwarding or reversing  
Press and hold c or d.  
When the video output is set to on in the initial  
setting menu (refer to V.OUT (display connec-  
tion) on page 30) and a separately sold display  
is connected to this unit, the text information  
appears on the display.  
1
Selecting a file  
Press c or d.  
JPEG files: not available.  
6 Variable message area  
1
Returning to root folder  
Press and hold B (BAND/ESC).  
DVD video: shows the audio language, subti-  
tle language, viewing angle, repeat range and  
speaker output channel.  
1
Switching the media file type  
1
Press B (BAND/ESC) to switch between media file  
types.  
Video CD: shows the repeat range and audio  
output channel.  
JPEG files: not available.  
DivX: shows the audio system, subtitle setting  
and repeat range.  
Pause or resume playback  
Press f.  
1
CD, compressed audio: shows the repeat  
range and random setting.  
Selecting a file directly in the  
current folder  
Information display  
The operation is the same as that of the built-in DVD  
player.  
Refer to Searching for the part you want to play on  
page 14.  
18  
19  
En  
En  
Section  
Section  
02  
Operating this unit  
Operating this unit  
iPod  
02  
!
Incompatible text saved on the iPod will not  
be displayed by the unit.  
Displaying text information  
Function settings  
1
Press M.C. to display the main menu.  
Basic operations  
The operation is the same as that of the compressed  
audio on the built-in DVD player.  
Refer to Displaying text information on page 15.  
1
Press  
to switch to the top menu of  
2
Turn M.C. to select the function.  
Playing songs on an iPod  
list search.  
After selecting, perform the following proce-  
dures to set the function.  
1
Open the USB port cover.  
Plug an iPod into the USB port/USB port and  
AUX input.  
2
2
Use M.C. to select a category/song.  
Selecting files from the file  
name list  
REPEAT (repeat play)  
!
When playing songs on an iPod, plug an iPod  
into the USB port using the iPod Dock Con-  
nector to USB Cable.  
Changing the name of the song or category  
1
Turn M.C.  
Refer to REPEAT (repeat play) on page 17.  
However, the repeat play ranges you can select are  
different from that of the built-in DVD player. The re-  
peat play ranges of the USB portable audio player/  
USB memory are:  
!
When browsing for a song  
Playlistsartistsalbumssongspodcasts—  
genrescomposersaudiobooks  
When browsing for a video  
Depending on your iPod, categories shown on the  
display differ.  
The operation is the same as that of the built-in DVD  
player.  
Refer to Selecting and playing files/tracks from the file  
name/track title list on page 15.  
!
When playing videos on an iPod with video  
capabilities, plug an iPod into the USB port  
and AUX input using an interface cable (e.g.,  
CD-IU50V).  
!
!
!
!
TRACK Repeat just the current file  
FOLDER Repeat the current folder  
ALL Repeat all files  
For details on the position of the USB port and  
AUX input, refer to Head unit on page 5.  
Press S (SRC/OFF) to select USB-iPod as a  
source.  
Playing  
1
3
Advanced operations using  
special buttons  
RANDOM (random play)  
When a song or video is selected, press M.C.  
Playback will start.  
Refer to RANDOM (random play) on page 17.  
ROTATION (picture rotation)  
Viewing a list of songs/videos in the selected cate-  
gory  
1
Selecting a track (chapter)  
Press c or d.  
Changing audio language during playback (Multi-  
audio)  
Refer to Changing audio language during playback  
(Multi-audio) on page 16.  
When a category is selected, press M.C.  
1
!
This function is available for JPEG files.  
Playing a song in the selected category  
1
Fast forwarding or reversing  
Press and hold c or d.  
Refer to ROTATION (picture rotation) on page 17.  
When a category is selected, press and hold M.C.  
1
!
You cannot perform this operation by pressing  
the button of the same name on the remote con-  
trol.  
PAUSE (pause)  
Searching the list by alphabet  
1
Notes  
When a list for the selected category is displayed,  
press  
to switch to alphabet search mode.  
Turn M.C. to select a letter.  
Press M.C. to display the alphabetical list.  
If alphabet search fails, NOT FOUND is dis-  
played.  
Refer to PAUSE (pause) on page 18.  
S.RTRV (advanced sound retriever)  
!
!
!
!
!
The iPod cannot be turned on or off when the  
Changing the subtitle language during playback  
(Multi-subtitle)  
Refer to Changing the subtitle language during play-  
back (Multi-subtitle) on page 16.  
2
3
!
control mode is set to CTRL AUDIO.  
Disconnect headphones from the iPod before  
connecting it to this unit.  
The iPod will turn off about two minutes after  
the ignition switch is set to OFF.  
Read the precautions for iPod in the following  
section. Refer to page 61.  
If an error message is displayed, refer to Error  
messages on page 57.  
!
This function is available for compressed audio  
files.  
Refer to S.RTRV (advanced sound retriever) on page  
18.  
!
You cannot perform this operation by pressing  
the button of the same name on the remote con-  
trol.  
Displaying text information  
Selecting a repeat play range  
When the video output is set to off in the initial  
setting menu (refer to Switching the informa-  
tion display on page 18), the text information  
of the currently playing song will appear on  
this unit. You can switch the text information.  
Refer to Selecting a repeat play range on page 17.  
However, the repeat play ranges you can select are  
different from that of the built-in DVD player. The re-  
peat play ranges of the USB portable audio player/  
USB memory are:  
Switching the information display  
The operation is the same as that of the built-  
in DVD player.  
Refer to Switching the information display on  
page 18.  
Browsing for a song/video  
!
!
!
TRACK Repeat the current file  
FOLDER Repeat the current folder  
ALL Repeat all files  
!
When the video output is set to on in the in-  
itial setting menu and an separately sold  
display is connected to this unit, the text in-  
formation appears on the display (refer to  
V.OUT (display connection) on page 30).  
The elapsed playing time is displayed on  
this unit and you cannot switch the text in-  
formation.  
Operations to control an iPod with this unit is  
designed to be as close to the iPod as possible  
to make operation and song/video search  
easy.  
Playing tracks in random order  
Refer to Playing tracks in random order on page 17.  
!
When the separately sold display is con-  
nected to this unit and the video output is  
set to on in the initial setting menu (refer to  
V.OUT (display connection) on page 30), the  
listed information of videos will appear on  
the display.  
Pausing playback  
Refer to Pausing playback on page 17.  
Enhancing compressed audio and restoring rich  
sound (advanced sound retriever)  
Refer to Enhancing compressed audio and restoring  
rich sound (advanced sound retriever) on page 17.  
20  
21  
En  
En  
Section  
Section  
02  
Operating this unit  
Operating this unit  
02  
S.RTRV (advanced sound retriever)  
Selecting the desired text information  
Operating this units iPod function from your iPod  
This function is not compatible with the following  
iPod models.  
1
Press M.C. to display the setting mode.  
Turn M.C. to select your favorite setting.  
1
Press  
.
2
Automatically enhances compressed audio and re-  
stores rich sound.  
!
!
!
SONGS Play back songs in the selected list  
in random order.  
ALBUMS Play back songs from a randomly  
selected album in order.  
Scrolling the text information to the left  
!
iPod nano 1st generation  
1
Press M.C. to display the setting mode.  
Turn M.C. to select the desired setting.  
For details, refer to Enhancing compressed audio  
and restoring rich sound (advanced sound retriever)  
on the previous page.  
1
Press and hold  
.
!
1
iPod 5th generation  
Press 4/iPod/AUDIO to switch the control mode.  
2
!
CTRL IPOD This units iPod function can be  
operated from the connected iPod.  
CTRL AUDIO This units iPod function can  
be operated from this unit.  
OFF Cancel random play.  
Advanced operations using  
special buttons  
3
Press M.C. to confirm the selection.  
!
3
Press M.C. to confirm the selection.  
SHUFFLEALL (shuffle all)  
2
When you select CTRL IPOD, operate the con-  
Selecting a repeat play range  
nected iPod to select a song/video and play.  
!
1
This function is available only for songs.  
Press M.C. to turn shuffle all on.  
To turn off, set SHUFFLE in the FUNCTION menu  
to off.  
1
Press 6/ /ANGLE to cycle between the follow-  
!
Switching the control mode to CTRL IPOD  
pauses song/video playback. Operate the iPod  
to start playback.  
Information display  
ing:  
When the video output is set to on in the initial  
setting menu (refer to V.OUT (display connec-  
tion) on page 30) and a separately sold display  
is connected to this unit, the text information  
appears on the display.  
!
!
ONE Repeat the current song  
ALL Repeat all songs in the selected list  
!
The following functions are still accessible  
from the unit even if the control mode is set  
to CTRL IPOD.  
LINK PLAY (link play)  
Playing songs in a random order (shuffle)  
1
Press 5/  
/SUB TITLE to turn shuffle all on.  
!
1
This function is available only for songs.  
Press M.C. to display the setting mode.  
Turn M.C. to change the mode; press to select.  
For details about the settings, refer to Playing  
songs related to the currently playing song on the  
previous page.  
!
!
!
Fast forward/reverse  
Track up/down  
Switching the text information  
!
To turn off, set SHUFFLE in the FUNCTION menu  
to off.  
2
!
This function is available only for songs.  
Pausing playback  
Press 2/PAUSE to pause or resume.  
Enhancing compressed audio and restoring rich  
sound (advanced sound retriever)  
1
Playing songs related to the currently playing song  
You can play songs from the following lists.  
Album list of the currently playing artist  
Song list of the currently playing album  
Album list of the currently playing genre  
1
Press 1/S.Rtrv/DVD MENU to cycle between:  
OFF (off)12  
1 is effective for low compression rates, and 2 is  
effective for high compression rates.  
CTRL (control mode)  
1
Press M.C. to select your favorite setting.  
For details, refer to Operating this units iPod func-  
tion from your iPod on the previous page.  
1
Press and hold  
to switch to link play mode.  
2
Turn M.C. to change the mode; press to select.  
PAUSE (pause)  
Function settings  
!
!
!
ARTIST Plays an album of the artist cur-  
rently being played.  
ALBUM Plays a song from the album cur-  
rently being played.  
GENRE Plays an album from the genre cur-  
rently being played.  
Information display  
1
Press M.C. to pause or resume.  
1
Press M.C. to display the main menu.  
AUDIO BOOK (changing of audiobook speed)  
2
Turn M.C. to change the menu option  
and press to select FUNCTION.  
Turn M.C. to select the function.  
!
1
This function is available only for songs.  
Press M.C. to display the setting mode.  
Turn M.C. to select your favorite setting.  
!
SEARCHING flashes while searching the list and  
then the playback of the list starts.  
3
2
!
FASTER Playback at a speed faster than nor-  
After selecting, perform the following proce-  
dures to set the function.  
mal  
!
!
NORMAL Playback at normal speed  
SLOWER Playback at a speed slower than  
normal  
REPEAT (repeat play)  
3
Press M.C. to confirm the selection.  
Title display  
1
2
Press M.C. to display the setting mode.  
Turn M.C. to select a repeat play range.  
For details, refer to Selecting a repeat play range on  
this page.  
WIDE (changing the screen mode)  
1 Source icon  
2 Power indicator  
!
1
This function is available only for video.  
Press M.C. to switch the screen mode.  
Appears when the power is supplied to the  
iPod.  
3
Press M.C. to confirm the selection.  
!
!
WIDE :ON Wide screen (16:9)  
WIDE :OFF Standard screen (4:3)  
SHUFFLE (shuffle)  
3 Song number indicator  
4 Repeat indicator  
5 Play time indicator  
6 Shuffle indicator  
22  
23  
En  
En  
Section  
Section  
02  
Operating this unit  
Operating this unit  
02  
%
play.  
Press  
to switch the information dis-  
Setting the subtitle language  
Setting up the DVD player  
Introduction of DVD setup  
adjustments  
SLA (source level adjustment)  
SLA (Source level adjustment) lets you adjust the vo-  
lume level of each source to prevent radical changes  
in volume when switching between sources.  
When selecting FM as the source, you cannot switch  
to SLA.  
You can set a desired subtitle language. When avail-  
able, the subtitles will be displayed in the selected  
language.  
Information displayTitle display  
#
PHOTO is displayed.  
If an album art data is not included in a song,  
1
2
3
4
Move the thumb pad up or down to select SUBTI-  
TLE LANG. in LANG.  
Click the thumb pad.  
A subtitle language menu is displayed.  
Move the thumb pad up, down, left or right to se-  
lect the desired language.  
You can use this menu to change audio, subtitle, par-  
ental lock and other DVD settings.  
!
!
!
Settings are based on the FM volume level, which  
remains unchanged.  
The AM volume level can also be adjusted with  
this function.  
Video CD, CD, compressed audio and DivX are  
automatically set to the same source level adjust-  
ment volume.  
!
To perform this function, set the remote control to  
DVD mode.  
Audio Adjustments  
1
1
2
Select DVD as the source and then press g.  
Press MENU when the disc is stopped.  
The DVD setup menu is displayed.  
Press M.C. to display the main menu.  
Click the thumb pad.  
The subtitle language is set.  
2
Turn M.C. to change the menu option  
3
Move the thumb pad left or right to switch the  
DVD setup menu categories.  
and press to select AUDIO.  
Turn M.C. to select the audio function.  
!
!
Bluetooth, external unit 1 and external unit 2 are  
automatically set to the same source level adjust-  
ment volume.  
iPod and USB storage device are automatically  
set to the same source level adjustment volume.  
Press M.C. to display the setting mode.  
Turn M.C. to adjust the source volume.  
Adjustment range: +4 to 4  
Notes  
LANG. (language)PICT. (picture)GEN. (gener-  
al)  
!
If the selected language is not available, the  
3
language specified on the disc is displayed.  
You can also switch the subtitle language by  
pressing SUBTITLE during playback. (Refer to  
Changing the subtitle language during play-  
back (Multi-subtitle) on page 16.)  
After selecting, perform the following proce-  
dures to set the audio function.  
4
Move the thumb pad up or down to select the  
DVD setup function names.  
!
For LANG.: SUBTITLE LANG. (subtitle language  
settings)AUDIO LANG. (audio language set-  
tings)MENU LANG. (menu language settings)  
OSD LANGUAGE (on screen display language  
setting)CHARACTER SET (character set set-  
ting)  
For PICT.: ANGLE ICON DISPLAY (angle icon)—  
TV ASPECT (TV aspect)SLIDESHOW TIME (sli-  
deshow interval time setting)  
For GEN.: PARENTAL (parental lock)DivX SUB-  
TITLE (DivX subtitle)IEC DIGITAL OUTPUT (di-  
gital output setting)DivX VOD (DivX VOD)—  
SAMPLING OUTPUT (down sampling output set-  
ting)  
If you press MENU during display of a DVD setup  
menu, the DVD setup menu is canceled and the  
unit returns to the previous display.  
1
2
FAD/BAL (fader/balance adjustment)  
1
2
Press M.C. to display the setting mode.  
Press M.C. to cycle between fader (front/rear) and  
balance (left/right).  
3
Press M.C. to confirm the selection.  
!
The setting made here will not be affected  
even if the subtitle language is switched dur-  
ing playback using SUBTITLE.  
3
Turn M.C. to adjust speaker balance.  
EQUALIZER (equalizer recall)  
When you select OTHERS  
1
2
Press M.C. to display the setting mode.  
Turn M.C. to select the equalizer.  
DYNAMICVOCALNATURALCUSTOM—  
FLATPOWERFUL  
A language code input display is shown when  
OTHERS is selected. Refer to Language code chart for  
DVD on page 66.  
3
Press M.C. to confirm the selection.  
1
Pressing CLEAR cancels the input numbers.  
TONE CTRL (equalizer adjustment)  
!
Adjusted equalizer curve settings are stored in  
CUSTOM.  
Setting the audio language  
1
2
Press M.C. to display the setting mode.  
Press M.C. to select BASS (bass)/MID (mid)/TRE-  
BLE (treble).  
Turn M.C. to adjust the level.  
Adjustment range: +6 to 6  
Menu operations identical for  
DVD setup adjustments  
1
2
3
4
Move the thumb pad up or down to select AUDIO  
LANG. in LANG.  
Click the thumb pad.  
An audio language menu is displayed.  
Move the thumb pad up, down, left or right to se-  
lect the desired audio language.  
Click the thumb pad.  
3
Returning to the previous display  
1
Press RETURN.  
LOUDNESS (loudness)  
Loudness compensates for deficiencies in the low-  
and high-frequency ranges at low volume.  
The audio language is set.  
1
Press M.C. to display the setting mode.  
Turn M.C. to select the desired setting.  
OFF (off)LOW(low)HIGH (high)  
Press M.C. to confirm the selection.  
Notes  
If the selected language is not available, the  
language specified on the disc is used.  
2
!
3
24  
25  
En  
En  
Section  
Section  
02  
Operating this unit  
Operating this unit  
02  
!
You can also switch the audio language by  
pressing AUDIO during playback. (Refer to  
Changing audio language during playback  
(Multi-audio) on page 16.)  
The setting made here will not be affected  
even if the audio language is switched during  
playback using AUDIO.  
Notes  
Setting the character set  
Setting parental lock  
!
When playing discs that do not specify  
PANSCAN, the disc is played back in  
LETTER BOX display even if you select the  
PANSCAN setting. Confirm whether the disc  
16 : 9 LB  
You can set the preferred character set for DivX subti-  
tle file, information display and list display.  
Some DVD video discs let you use parental lock to re-  
strict children from viewing violent and adult-oriented  
scenes. You can set parental lock to the desired level.  
1
2
3
4
Move the thumb pad up or down to select CHAR-  
ACTER SET in LANG.  
Click the thumb pad.  
A character set setting menu is displayed.  
Move the thumb pad up or down to select the de-  
sired character set.  
!
!
!
When you have a parental lock level set and play  
a disc featuring parental lock, code number input  
indications may be displayed. In such cases, play-  
back will begin when the correct code number is  
entered.  
package bears the  
mark.  
!
The TV aspect ratio cannot be changed for  
some discs. For details, refer to the discs in-  
structions.  
If you have selected OTHERS, refer to When  
you select OTHERS on the previous page.  
Click the thumb pad.  
Setting the code number and level  
A code number must be registered in order to play  
back discs with parental lock.  
The character set is set.  
Setting the menu language  
Setting the slide show interval  
1
Move the thumb pad up or down to select PAR-  
ENTAL in GEN.  
JPEG files can be viewed as a slide show on this unit.  
In this setting, the interval between each image can  
be set.  
Setting the angle icon display  
1
2
3
4
Move the thumb pad up or down to select MENU  
LANG. in LANG.  
Click the thumb pad.  
A menu language menu is displayed.  
Move the thumb pad up, down, left or right to se-  
lect the desired menu language.  
Click the thumb pad  
2
Click the thumb pad.  
Parental lock setting menu is displayed.  
Press 0 to 9 to input a four digit code number.  
Move the thumb pad left or right to move the cur-  
sor to the previous or next position.  
Click the thumb pad after entering the four digit  
code number.  
The angle icon can be set so it appears on scenes  
where the angle can be switched.  
1
2
3
Move the thumb pad up or down to select SLIDE-  
SHOW TIME in PICT.  
Click the thumb pad.  
A slide show interval time menu is displayed.  
Move the thumb pad up or down to select the de-  
sired TV aspect.  
3
4
1
Move the thumb pad up or down to select ANGLE  
ICON DISPLAY in PICT.  
5
2
Click the thumb pad to select on or off.  
A character set setting menu is displayed.  
The menu language is set.  
The code number is set, and the level can now be  
set.  
!
!
!
!
Manual JPEG images can be switched  
Notes  
manually  
6
Move the thumb pad left or right to select the de-  
sired level.  
!
If the selected language is not available, the  
5sec JPEG images switch at intervals of 5  
Setting the aspect ratio  
language specified on the disc is displayed.  
If you have selected OTHERS, refer to When  
you select OTHERS on the previous page.  
seconds  
!
LEVEL8 Playback of the entire disc is possi-  
ble (initial setting)  
!
10sec JPEG images switch at intervals of 10  
There are two kinds of display: a wide screen display  
that has a width-to-height ratio (TV aspect ratio) of  
16:9, and regular display that has a TV aspect of 4:3.  
Be sure to select the correct TV aspect for the display  
connected to V OUT.  
seconds  
!
LEVEL7 to LEVEL2 Playback of discs for  
children and non-adult-oriented discs is pos-  
sible  
15sec JPEG images switch at intervals of 15  
seconds  
4
Click the thumb pad.  
!
LEVEL1 Playback of discs for children only  
is possible  
Setting the on screen display  
language  
!
When using regular display, select either LETTER  
BOX or PANSCAN. Selecting 16:9 may result in  
an unnatural picture.  
The slideshow interval time is set.  
7
Click the thumb pad.  
The parental lock level is set.  
You can set the preferred language for information  
display, DVD setup menu and list display etc.  
1
!
If you select the TV aspect ratio, the units display  
will change to the same setting.  
Move the thumb pad up or down to select TV AS-  
PECT in PICT.  
Click the thumb pad.  
TV aspect menu is displayed.  
Notes  
Move the thumb pad up or down to select OSD  
LANGUAGE in LANG.  
Click the thumb pad.  
An on screen display language menu is dis-  
played.  
Move the thumb pad up or down to select the de-  
sired on screen display language.  
Click the thumb pad.  
1
2
3
!
We recommend to keep a record of your code  
number in case you forget it.  
2
!
The parental lock level is stored on the disc.  
Look for the level indication written on the  
disc package, included literature or on the  
disc itself. Parental lock of this unit is not pos-  
sible if a parental lock level is not stored on  
the disc.  
Move the thumb pad up or down to select the de-  
sired TV aspect.  
3
4
!
16:9 Wide screen picture (16:9) is displayed  
as is (initial setting)  
The on screen display language is set.  
!
LETTER BOX The picture is the shape of a  
letterbox with black bands on the top and bot-  
tom of the screen  
!
With some discs, the parental lock may be ac-  
tive only for certain levels of scenes. The play-  
back of those scenes will be skipped. For  
details, refer to the instruction manual that  
came with the disc.  
!
PANSCAN The picture is cut short on the  
right and left sides of the screen  
4
Click the thumb pad.  
26  
27  
En  
En  
Section  
Section  
02  
Operating this unit  
Operating this unit  
02  
!
Up to 126 characters can be displayed on one  
screen. If more than 126 characters are set,  
the excess characters will not be displayed.  
Changing the level  
Displaying the deregistration code  
CLOCK SET (setting the clock)  
You can change the set parental lock level.  
If your device is already activated, deregister it by en-  
tering the deregistration code.  
1
2
Press M.C. to display the setting mode.  
Press M.C. to select the segment of the clock dis-  
play you wish to set.  
1
Move the thumb pad up or down to select PAR-  
ENTAL in GEN.  
1
Move the thumb pad up or down to select DivX  
VOD in GEN.  
2
Click the thumb pad.  
Each time you press M.C., one segment of the  
clock display is selected.  
HourMinute  
Setting for digital output  
2
3
Click the thumb pad.  
Move the thumb pad up or down to select DE-  
REGISTRATION CODE.  
Parental lock setting menu is displayed.  
Press 0 to 9 to input the registered code number.  
Move the thumb pad left or right to move the cur-  
sor to the previous or next position.  
Click the thumb pad after entering the four digit  
code number.  
3
4
Audio which is outputted from digital output of this  
unit can be selected. Normally, set to STREAM. If this  
units digital output is not used, there is no need to  
change settings.  
3
Turn M.C. to adjust the clock.  
4
5
Click the thumb pad.  
Move the thumb pad up or down to select OK.  
FM STEP (FM tuning step)  
5
!
To cancel deregistration, select CANCEL.  
!
Selecting Linear PCM enables you to switch the  
output channel if playing dual mono mode DVD  
video discs.  
Move the thumb pad up or down to select IEC DI-  
GITAL OUTPUT in GEN.  
The FM tuning step employed by seek tuning can be  
switched between 100 kHz, the preset step,  
and 50 kHz.  
6
Click the thumb pad.  
This sets the code number, and the level can now  
be changed.  
The deregistration is complete.  
!
If you input an incorrect code number, the  
icon  
is displayed. Input the correct code  
1
2
!
If seek tuning is performed in 50 kHz steps, sta-  
tions may be tuned in imprecisely. Tune in the sta-  
tions with manual tuning or use seek tuning  
again.  
number.  
Click the thumb pad to select the desired digital  
output setting.  
Setting the down sampling output  
!
If you forget your code number, refer to If you  
forget your code number on this page.  
!
STREAM The Dolby Digital/DTS signal is  
output as it is (initial setting)  
!
The tuning step remains at 50 kHz during manual  
tuning.  
If the sampling frequency of the audio is more than  
96 kHz, the audio outputted from the digital output of  
this unit can be reduced to 48 kHz. Normally, set the  
down sampling output to on. If this units digital out-  
put is not used, there is no need to change settings.  
6
7
Move the thumb pad left or right to select the de-  
sired level.  
Click the thumb pad.  
!
Linear PCM The Dolby Digital/DTS signal is  
converted to and output as a linear PCM sig-  
nal  
1
2
Press M.C. to display the setting mode.  
Turn M.C. to select the FM tuning step.  
50KHZ (50 kHz)100KHZ (100 kHz)  
Press M.C. to confirm the selection.  
The parental lock level is set.  
3
1
Move the thumb pad up or down to select SAM-  
PLING OUTPUT in GEN.  
AM STEP (AM tuning step)  
If you forget your code number  
2
Click the thumb pad.  
â
Displaying the DivX VOD  
registration code  
Each time you click the thumb pad the selected  
setting switches on or off.  
1
2
Press M.C. to display the setting mode.  
Turn M.C. to select the AM tuning step.  
10KHZ (10 kHz)9KHZ (9 kHz)  
Please see the following section, and press CLEAR 10  
times in the parental lock setting menu. Refer to  
Changing the level on this page. The registered code  
number is canceled, letting you register a new one.  
In order to play DivX VOD (video on demand) con-  
tents on this unit, the unit must first be registered  
with a DivX VOD contents provider. For registration,  
generate a DivX VOD registration code and submit it  
to your provider.  
3
Press M.C. to confirm the selection.  
AUX1 (front AUX input setting)  
Activate this setting when using an auxiliary device  
connected to this unit.  
Initial Settings  
Setting the DivX subtitle file  
!
Keep a record of the code as you will need it  
when you register your unit to the DivX VOD provi-  
der.  
Move the thumb pad up or down to select DivX  
VOD in GEN.  
Click the thumb pad.  
Move the thumb pad up or down to select REGIS-  
TRATION CODE.  
1
Press and hold S (SRC/OFF) until the  
1
Press M.C. to display the setting mode.  
Turn M.C. to select the desired setting.  
AUDIO (auxiliary device connected with stereo  
mini plug cable) VIDEO (auxiliary video device  
connected with a 4-pole mini plug cable) OFF  
(No auxiliary device)  
2
You can select whether or not to display DivX external  
subtitles.  
unit turns off.  
1
!
The DivX subtitles will be displayed even when  
CUSTOM is selected if no DivX external subtitle  
files exist.  
2
Press M.C. and hold until the initial set-  
ting menu appears in the display.  
2
3
1
2
Move the thumb pad up or down to select DivX  
SUBTITLE in GEN.  
Click the thumb pad to select whether to display  
DivX external subtitles or not.  
3
Press M.C. to confirm the selection.  
3
Turn M.C. to select one of the initial set-  
4
Click the thumb pad.  
Your registration code is displayed.  
tings.  
AUX2 (rear RCA input setting)  
After selecting, perform the following proce-  
dures to set the initial setting.  
1
Press M.C. to turn AUX2 on or off.  
!
!
ORIGINAL Display the DivX subtitles  
CUSTOM Display the DivX external subtitles  
VIDEO IN (Setting AV input)  
Notes  
!
Up to 42 characters can be displayed on one  
line. If more than 42 characters are set, the  
line breaks and the characters are displayed  
on the next line.  
28  
29  
En  
En  
Section  
Section  
02  
Operating this unit  
Operating this unit  
02  
!
!
When the display connection is set to  
on, the files of the currently playing  
folder are displayed.  
When the display connection is set to  
off, the file of the root folder is dis-  
played.  
1
Use the rear RCA input to connect an  
You can connect AV components to the AV input with  
an RCA cable.  
Switch the AV input setting according to the con-  
nected AV component.  
You can minimize distortion that may be caused by  
the equalizer curve settings.  
Setting an equalizer level high can cause distortion. If  
high sound is crippled or distorted, try switching to  
LOW. Normally, leave the setting at HIGH to ensure  
quality sound.  
auxiliary device featuring RCA output.  
For more details, refer to the installation man-  
ual.  
This auxiliary device is automatically set to  
AUX2.  
#
For more details, refer to the installation manual.  
!
!
Select EXT-VIDEO to watch video of a connected  
video unit as EXTERNAL source.  
Select AUX to watch video of an auxiliary device  
as AUX2 source.  
!
This function is available only when the multi-  
channel processor (DEQ-P7650) is connected to  
this unit.  
Playing a compressed audio file and press-  
This type of connection can only be made if  
ing  
!
in the file name list  
the auxiliary device has RCA outputs.  
1
2
Press M.C. to display the setting mode.  
Turn M.C. to switch the digital attenuator setting.  
1
2
Press M.C. to display the setting mode.  
Turn M.C. to select the desired setting.  
OFF (off)EXT-VIDEO (external video unit)AUX  
(auxiliary device)  
When the display connection is set to  
on, the name of the currently playing  
file is selected.  
When the display connection is set to  
off, you can return to the previous list  
(the folder one level higher).  
2
Press S (SRC/OFF) to select AUX2 as the  
!
!
HIGH High quality sound  
LOW Minimize distortion sound  
source.  
!
3
Press M.C. to confirm the selection.  
3
Press M.C. to confirm the selection.  
To watch video of AUX source, set auxiliary 2 set-  
ting on. For details, refer to AUX2 (rear RCA input  
setting) on the previous page.  
!
RESET (Resetting the audio functions)  
Switching between digital  
and analog  
When this unit is connected to the DEQ-  
P7650, you can switch to the AUX mode to  
analog or digital. However, when you use  
AUX2 as the source, make sure the AUX  
mode is set to analog.  
!
This function is available only when the multi-  
channel processor (DEQ-P7650) is connected to  
this unit.  
SCROLL (ever scroll)  
Using AUX1 and AUX2 source  
About AUX1 and AUX2  
There are two methods to connect auxiliary de-  
vices to this unit.  
When ever scroll is set to EVER, recorded text infor-  
mation scrolls continuously in the display. Set to off if  
you prefer the information to scroll just once.  
You can reset audio functions other than the following  
settings.  
!
!
!
!
!
!
!
Volume setting (refer to Adjusting the volume on  
page 9)  
Listening position setting (refer to Using the posi-  
tion selector on page 34)  
Fader/balance setting (refer to Using fader/balance  
adjustment on page 34)  
SLA (source level adjustment) setting (refer to Ad-  
justing source levels on page 36)  
Dynamic range control (refer to Using dynamic  
range control on page 36)  
1
Press M.C. to display the setting mode.  
Turn M.C. to select the desired setting.  
EVER (ever)OFF (off)  
2
1
Press S (SRC/OFF) to select AUX2 as the  
3
Press M.C. to confirm the selection.  
source.  
AUX1 source  
When connecting auxiliary device using the  
front AUX input.  
COLOR SYS (DVD output signal setting)  
Press S (SRC/OFF) until AUX2 appears in the  
display.  
#
cannot be selected. For more details, refer to  
AUX2 (rear RCA input setting) on page 29.  
When this unit is connected to a display, you need to  
adjust the DVD output signal suitable to DVD and  
your display signal setting.  
If the auxiliary setting is not turned on, AUX2  
!
You need to activate the AUX setting in the  
initial setting menu. Refer to AUX1 (front  
AUX input setting) on page 29.  
1
Press M.C. to display the setting mode.  
Turn M.C. to select an appropriate DVD output  
signal.  
Direct control setting (refer to Using direct control  
on page 36)  
Down-mix setting (refer to Using the down-mix  
function on page 36)  
2
2
Press B (BAND/ESC) to switch the  
NTSCPAL  
1
Insert the mini plug into the AUX input  
jack on this unit.  
For more details, refer to Head unit on page 5.  
This auxiliary device is automatically set to  
AUX1.  
3
Press M.C. to confirm the selection.  
modes.  
1
2
3
Press M.C. to display the setting mode.  
Turn M.C. to display YES.  
Press M.C.  
ANALOG (analog) DIGITAL (digital)  
V.OUT (display connection)  
You can use this unit with or without the display.  
When using this unit connected to the display, you  
can turn the display connection setting on or off. If  
you turn this function on, the detailed text information  
of the DVD, USB and USB-iPod source appears on  
the display.  
REALLY? appears in the display.  
Press M.C. to reset audio functions.  
COMPLETE appears in the display.  
4
Displaying the clock  
%
2
Press S (SRC/OFF) to select AUX1 as the  
source.  
Press  
to turn the clock display on or  
Notes  
off.  
1
Press M.C. to turn display connection on or off.  
!
When V.OUT is set to ON, you cannot switch  
Note  
to SCROLL.  
DIGITALATT (Correcting distorted sound)  
AUX2 source  
When connecting auxiliary device using the  
rear RCA input.  
The clock display disappears temporarily when  
you perform other operations, but the clock dis-  
play appears again after 25 seconds.  
!
According to the setting of V.OUT, the opera-  
tion of this unit differs. The examples are as  
follows:  
!
You need to activate the AUX setting in the  
initial setting menu. Refer to AUX2 (rear  
RCA input setting) on page 29.  
Playing a compressed audio file and dis-  
playing the file name list mode  
30  
31  
En  
En  
Section  
Section  
02  
Operating this unit  
Available accessories  
Bluetooth adapter  
03  
Advanced operations  
Using an external unit  
Digital Signal Processor  
1
Press M.C. to display the main menu.  
An external unit refers to a Pioneer product,  
such as those which will be available in the fu-  
ture. Although incompatible as a source, the  
basic functions of up to two external units can  
be controlled with this unit. When two external  
units are connected, the external units are  
automatically allocated to external unit 1 or ex-  
ternal unit 2.  
The basic operations of the external unit are  
explained below. The allocated functions will  
differ depending on the connected external  
unit. For details concerning these functions,  
refer to the owners manual for the external  
unit.  
You can use this unit to control a Bluetooth  
adapter, which is sold separately.  
You can use this unit to control a DEQ-P7650  
multi-channel processor (sold separately).  
By carrying out the following settings/adjust-  
ments in the order shown, you can effortlessly  
create a finely-tuned sound field.  
2
Use M.C. to select FUNCTION.  
For details concerning operation, refer to the  
Bluetooth adapters manuals. This section  
provides information on Bluetooth telephone/  
audio operations with this unit which differs  
from that described in the Bluetooth adapters  
manual.  
Turn to change the menu option. Press to se-  
lect.  
1
2
3
Setting the speaker setting  
Using the position selector  
Auto TA and EQ (auto-time alignment and auto-  
equalizing)  
3
Turn M.C. to select the function.  
FUNCTION 1 (function 1)FUNCTION 2  
(function 2)FUNCTION 3 (function 3)—  
FUNCTION 4 (function 4)AUTO/MANU  
(auto/manual)  
!
In some countries, CD-BTB100 is not sold  
on the market.  
4
5
Adjusting time alignment  
Adjusting the speaker output levels using a  
test tone  
!
This unit is a head unit group 1 unit.  
But the selecting a function operation is  
the same as that of the head unit group  
2.  
#
You can also select the function by pressing  
FUNC on the remote control.  
6
7
8
Selecting a cross-over frequency  
Adjusting the speaker output levels  
Adjusting the 3-band parametric equalizer  
When a phone call ends, the system re-  
turns to the previous source.  
Selecting the external unit as  
the source  
When a call comes in during sources  
other than Bluetooth telephone/audio  
source and the call is being carried on,  
you cannot use B (BAND/ESC) to switch  
Bluetooth telephone and Bluetooth  
audio.  
Introduction of DSP adjustments  
1
Press M.C. to display the main menu.  
%
Press S (SRC/OFF) to select EXTERNAL as  
the source.  
2
Use M.C. to select AUDIO.  
Turn to change the menu option. Press to se-  
lect.  
Basic operations  
The functions allocated to the following opera-  
tions will differ depending on the connected  
external unit. For details concerning these  
functions, refer to the owners manual for the  
connected external unit.  
3
Turn M.C. to select the audio function.  
FADER (balance adjustment)POSI (position  
selector)PLII (Dolby Pro Logic II)PANO  
(music mode adjust)OFF (sound field con-  
trol)Lo/Ro (down mix)DRC (dynamic  
range control)DIRECT (direct)SLA (source  
level adjustment)AUTO EQ (auto-equalizer  
on/off)FRONT (speaker setting)HPF  
(cross-over frequency)FRONT-L (speaker  
output level)TEST TONE (test tone)—  
%
%
%
%
%
Press B (BAND/ESC).  
Press and hold B (BAND/ESC).  
Press c or d.  
INITIAL (time alignment mode)FL (time  
alignment adjustment)POWERFUL (equali-  
zer recall)PEQ (3-band parametric equalizer)  
Press and hold c or d.  
Press a or b.  
#
You can also use A.MENU on the remote con-  
trol to select an audio menu.  
You can switch to PLII when the speaker set-  
ting for either center or rear speakers is set to on.  
When direct control is on, you can select PLII,  
PANO and DIRECT in the audio function menu.  
When you select MUSIC in the PLII, you can  
select adjusting music mode.  
Using the functions allocated  
to 1 to 6 keys  
#
#
%
Press any of 1 to 6.  
#
32  
33  
En  
En  
Section  
Section  
03  
Available accessories  
Available accessories  
03  
#
#
DRC is only effective for Dolby Digital sound.  
When selecting FM as the source, you cannot  
delay time to match the number and position  
of the occupied seats. When used in conjunc-  
tion with the SFC, this feature will make the  
sound image more natural and offer a panora-  
mic sound that envelops you.  
2
Press c or d to select the desired  
front left and right speakers over a range 0 to  
7.  
3 is the default and its recommended for  
most recordings. 0 places all center sound in  
the center speaker. 7 places all center sound  
equally in the left/right speakers.  
mode.  
switch to SLA.  
When you select TA :OFF in INITIAL, you can-  
not select FL.  
!
!
!
MOVIE Suitable for movie playback  
#
MUSIC Suitable for music playback  
MATRIX Suitable when FM radio recep-  
tion is weak  
#
You cannot select AUTO EQ if auto TA and EQ  
!
When adjustments are made to the listen-  
ing position, the speaker outputs are auto-  
matically set to the appropriate levels. To  
tailor the levels more precisely, refer to Ad-  
justing the speaker output levels using a  
test tone on page 38 or Adjusting the speak-  
er output levels on page 38.  
has not been carried out. SET A-EQ is displayed.  
!
OFF Turn Dolby Pro Logic II off  
#
To return to the display of each source, press  
B (BAND/ESC).  
If you do not operate the DSP function except  
Using sound field control  
The SFC function creates the sensation of a  
live performance.  
Adjusting the music mode  
You can adjust the music mode with the fol-  
lowing three controls.  
#
for TEST TONE, FL and PEQ within about 30 sec-  
onds, the display is automatically returned to the  
source display.  
!
The acoustics of performance spaces differ  
depending on the extent and contour of  
space through which sound waves can  
move and on how the created sounds  
bounce off the stage, walls, floors and ceil-  
ings. At a live performance you hear music  
in three stages: direct sound, early reflec-  
tions, and late reflections, or reverbera-  
tions. These factors are programmed into  
the SFC circuitry to recreate the acoustics  
of various performance settings.  
!
Panorama (PANO) extends the front stereo  
image to include the surround speakers for  
an exciting wraparoundeffect.  
Dimension (DIME) gradually adjusts the  
sound field either towards the front or rear.  
Center width control (CENTER) positions  
center-channel sounds between the center,  
left and right speakers. It improves the left-  
center-right stage presentation for both the  
driver and front passenger.  
1
Use M.C. to select POSI in the audio  
function menu.  
Refer to Introduction of DSP adjustments on  
the previous page.  
!
!
Using fader/balance adjustment  
You can change the fader/balance setting to  
provide an ideal listening environment for all  
of the occupied seats.  
2
Press c/d/a/b to select a listening po-  
sition.  
1
Use M.C. to select FADER in the audio  
Direction Display Position  
function menu.  
Refer to Introduction of DSP adjustments on  
the previous page.  
c
d
a
b
F/L  
Left front seat  
Right front seat  
Front seats  
1
Use M.C. to select PANO (adjusting  
1
Use M.C. to select OFF (sound field con-  
F/R  
FRT  
ALL  
music mode) in the audio function menu.  
Refer to Introduction of DSP adjustments on  
page 33.  
#
If the balance setting has been previously ad-  
trol) in the audio function menu.  
Refer to Introduction of DSP adjustments on  
page 33.  
justed, BALANCE will be displayed.  
All seats  
#
You can adjust the music mode only when  
2
Press a or b to adjust front/rear speak-  
MUSIC has been selected in PLII (Dolby Pro Logic  
II).  
er balance.  
2
Press c or d to select the desired SFC  
#
To cancel the selected listening position,  
FADER :F25 to FADER :R25 is displayed as the  
front/rear speaker balance moves from front to  
rear.  
mode.  
press the same button again.  
MUSICAL (musical)DRAMA (drama)—  
ACTION (action)JAZZ (jazz)HALL (hall)—  
CLUB (club)OFF (off)  
2
Press c or d to select controls.  
PANO (panorama)DIME (dimension)—  
CENTER (center width)  
Using Dolby Pro Logic II  
Dolby Pro Logic II creates five full-bandwidth  
output channels from two-channel sources to  
achieve high-purity matrix surround sound.  
#
FADER : 0 is the proper setting when only two  
speakers are used.  
Note  
3
Press d to select PANO and then press  
3
Press c or d to adjust the left/right  
If the source is a 2-channel LPCM or Dolby Digital  
audio source, we recommend turning Dolby Pro  
Logic II on when selecting SFC effects that are  
most suitable for 5.1-channel audio sources  
(such as MUSICAL, DRAMA or ACTION).  
On the other hand, when selecting SFC effects  
that are suitable for 2-channel audio sources  
(such as JAZZ, HALL or CLUB), we recommend  
turning Dolby Pro Logic II off.  
a to turn the panorama control on.  
speaker balance.  
!
If both the center and the rear speakers are  
set to OFF, you cannot use this function.  
Dolby Pro Logic II supports stereo sources  
with a sampling rate of up to 48 kHz and  
has no effect on other types of sources.  
#
To turn the panorama control off, press b.  
BALANCE:L25 to BALANCE:R25 is displayed  
as the left/right speaker balance moves from  
left to right.  
!
4
Press d to select DIME and then a or b  
to adjust front/rear speaker balance.  
+3 to 3 is displayed as the front/rear speaker  
balance moves from front to surrounds.  
Using the position selector  
1
Use M.C. to select PLII in the audio func-  
One way to assure a more natural sound is to  
optimize the stereo image and place you right  
in the center of the sound field. With the posi-  
tion selector function, you can automatically  
adjust the speaker output levels and insert a  
tion menu.  
Refer to Introduction of DSP adjustments on  
the previous page.  
5
Press d to select CENTER and then a or  
b to adjust the center image.  
Each time a or b is pressed it gradually  
spreads the center channel sound into the  
34  
35  
En  
En  
Section  
Section  
03  
Available accessories  
Available accessories  
03  
#
You can switch REV (reverse phase) or NOR  
2
Press a and b to turn the direct control  
1
Use M.C. to select AUTO EQ in the  
Using the down-mix function  
Multi-channel audio can be played back in 2-  
channels with the down-mix function.  
(normal phase) when PHASE (subwoofer setting)  
has been selected.  
on or off.  
audio function menu.  
Refer to Introduction of DSP adjustments on  
page 33.  
Adjusting source levels  
#
If auto TA and EQ have not been carried out,  
1
Use M.C. to select Lo/Ro (down mix) in  
Correcting the subwoofers phase  
With SLA (source level adjustment), the vo-  
lume levels of each source can be adjusted to  
prevent significant differences between  
sources.  
SET A-EQ is displayed instead of AUTO EQ.  
the audio function menu.  
Refer to Introduction of DSP adjustments on  
page 33.  
If boosting the bass output from the subwoo-  
fer is not effective or you feel that the bass is  
becoming less clear, the subwoofer output  
and bass content emitted from the other  
speakers may be canceling each other out.  
2
Press a to turn the auto-equalizer on.  
ON appears in the display.  
To turn auto-equalizer off, press b.  
#
2
Press c or d to switch the down mix  
!
Settings are based on the FM volume level,  
which remains unchanged.  
settings.  
!
!
Lt/Rt Down mixing so that the surround  
sound components can be restored (de-  
coded).  
Lo/Ro Stereo mixing the original audio  
data that does not contain channel modes  
such as surround sound components.  
1
Use M.C. to select FRONT (speaker set-  
Setting the speaker setting  
1
Compare the FM volume level with the  
ting) in the audio function menu.  
Refer to Introduction of DSP adjustments on  
page 33.  
level of the source you wish to adjust.  
Be sure to adjust the speaker settings, such  
as size (bass capacity), according to the  
speakers installed. Set the size to LRG (large)  
if the speaker is capable of reproducing  
sounds of about 100 Hz and below. Otherwise,  
select SML (small).  
2
Use M.C. to select SLA in the audio  
function menu.  
Refer to Introduction of DSP adjustments on  
page 33.  
2
Press c or d to select SUB.W.  
Refer to Setting the speaker setting on this  
page.  
Using dynamic range control  
!
Low frequency sound is not emitted if the  
subwoofer is set to OFF and the front and  
rear speakers are set to SML or OFF.  
It is imperative that speakers that are not  
installed be set to OFF.  
Set the front or rear speaker to LRG if the  
speaker is capable of reproducing bass  
content, or if no subwoofer is installed.  
3
Press a or b to adjust the source vo-  
3
on.  
Press a to turn the subwoofer output  
The dynamic range refers to the difference be-  
tween the smallest and largest sounds  
emitted. Dynamic range control compresses  
this difference so that the sounds can be  
heard clearly even at low volume levels.  
lume.  
Each time M.C. is pushed up or down, source  
volume increases or decreases.  
+4 to 4 is displayed as the source volume is  
increased or decreased.  
!
!
4
Press d to select PHASE (subwoofer  
setting).  
!
The dynamic range control is only effective  
for Dolby Digital sound.  
5
Press a or b to select the phase of sub-  
Notes  
woofer output.  
Press a to select NOR (normal phase). Press  
b to select REV (reverse phase).  
!
The AM volume level can also be adjusted  
with this function.  
Video CD, CD, compressed audio and DivX  
are automatically set to the same source level  
adjustment volume.  
External unit 1 and external unit 2 are automa-  
tically set to the same source level adjustment  
volume.  
iPod and USB storage device are automati-  
cally set to the same source level adjustment  
volume.  
1
Use M.C. to select FRONT (speaker set-  
1
Use M.C. to select DRC in the audio  
ting) in the audio function menu.  
Refer to Introduction of DSP adjustments on  
page 33.  
function menu.  
Refer to Introduction of DSP adjustments on  
page 33.  
!
Note  
When playing a 2-channel mono source with  
Dolby Pro Logic II turned on:  
!
!
!
2
Press c or d to select the speaker to be  
2
Press a and b to turn the dynamic  
No sound is emitted if the center speaker set-  
ting is SML or LRG and no center speaker is  
installed.  
adjusted.  
range control on and off.  
FRONT (front speakers)CENTER (center  
speaker)REAR (rear speakers)SUB.W  
(subwoofer)PHASE (subwoofer setting)  
Using direct control  
You can override the audio settings to check  
their effectiveness.  
#
You can only switch to PHASE when the sub-  
Selecting a cross-over frequency  
woofer has been set to ON.  
The frequency under which sounds are repro-  
duced through a subwoofer can be selected.  
For example, if the size of one of the installed  
speakers is set to SML, you can select the fre-  
quency under which sounds will be repro-  
duced through a speaker set to LRG or a  
subwoofer.  
!
When direct control is on, all audio func-  
tions except VOLUME and PLII are locked.  
Using the auto-equalizer  
3
Press a or b to select the correct size  
The auto-equalizer is the equalizer curve cre-  
ated by auto TA and EQ (refer to Auto TA and  
EQ (auto-time alignment and auto-equalizing)  
on page 41).  
for the selected speaker.  
OFF (off)SML (small)LRG (large)  
1
Use M.C. to select DIRECT in the audio  
function menu.  
Refer to Introduction of DSP adjustments on  
page 33.  
#
You cannot select OFF when FRONT (front  
speakers) has been selected.  
You can select ON or OFF when SUB.W (sub-  
woofer) has been selected.  
You can turn the auto-equalizer on or off.  
#
36  
37  
En  
En  
Section  
Section  
03  
Available accessories  
Available accessories  
03  
1
Use M.C. to select HPF in the audio  
3
Press a or b to adjust the speaker out-  
5
Press B (BAND/ESC) to return to the or-  
1
Use M.C. to select FL (time alignment  
function menu.  
Refer to Introduction of DSP adjustments on  
page 33.  
put level.  
dinary display.  
adjustment) in the audio function menu.  
Refer to Introduction of DSP adjustments on  
page 33.  
+10 to 10 is displayed as the level is in-  
creased or decreased.  
Notes  
!
!
If necessary, select speakers and adjust their  
absoluteoutput levels. (Refer to Adjusting  
the speaker output levels on the previous  
page.)  
You will get the same results whether you ad-  
just the speaker output levels with this mode  
or with FRONT-L.  
#
When you select TA :OFF in INITIAL, you can-  
2
Press c or d to select the speaker to be  
Note  
not select FL.  
#
CHECK POSI is displayed. To set the position,  
refer to Using the position selector on page 34.  
adjusted.  
You will get the same results whether you adjust  
the speaker output levels with this mode or with  
TEST TONE.  
If a position other than F/L or F/R is selected,  
F (front speakers)C (center speaker)R  
(rear speakers)SW (subwoofer)  
3
Press a or b to select cross-over fre-  
2
Press c or d to select the speaker to be  
Adjusting the speaker output levels  
using a test tone  
You can easily get the right overall balance  
among the speakers with this function.  
quency for the selected speaker.  
6380100125160200 (Hz)  
adjusted.  
FL (front speaker left)C (center speaker)FR  
(front speaker right)RR (rear speaker right)  
RL (rear speaker left)SW (subwoofer)  
Using time alignment  
The distance between the listening position  
and each speaker can be adjusted with this  
function.  
Note  
When you select a cross-over frequency, you are  
setting the cross-over frequency for the subwoo-  
fers L.P.F. (low-pass filter) and the SML speakers  
H.P.F. (high-pass filter). The cross-over frequency  
setting has no effect if the subwoofer is set to  
OFF and other speakers are set to LRG or OFF.  
#
Speakers with the size set to OFF cannot be  
1
Use M.C. to select TEST TONE in the  
selected. (Refer to Setting the speaker setting on  
page 37.)  
audio function menu.  
Refer to Introduction of DSP adjustments on  
page 33.  
1
Use M.C. to select INITIAL (time align-  
ment mode) in the audio function menu.  
Refer to Introduction of DSP adjustments on  
page 33.  
3
Press a or b to adjust the distance be-  
tween the selected speaker and the listen-  
ing position.  
0.0 (cm) to 500.0 (cm) is displayed as the dis-  
tance is increased or decreased.  
2
Press d to start the test tone output.  
The test tone is emitted from each speaker in  
the following sequence at intervals of about  
two seconds. The current settings for the  
speaker emitting the test tone will be shown  
on the display.  
FRONT-L (left front speaker)CENTER (center  
speaker)FRONT-R (right front speaker)—  
REAR-R (right rear speaker)REAR-L (left rear  
speaker)SUB.W (subwoofer)  
Adjusting the speaker output  
levels  
Fine adjustments of the speaker output level  
can be made by listening to audio output.  
First, use the test tone to adjust the speaker to  
an approximate level, and then use this func-  
tion to make fine adjustments.  
2
Press c or d to select the time align-  
ment.  
!
!
INITIAL Initial time alignment (factory set-  
ting)  
AUTO TA Time alignment created by auto  
TA and EQ. (Refer to Auto TA and EQ (auto-  
time alignment and auto-equalizing) on  
page 41.)  
4
Press B (BAND/ESC) to return to the or-  
dinary display.  
Using the equalizer  
You can adjust the equalization to match the  
cars interior acoustic characteristics as de-  
sired.  
#
Check each speaker output level. If no adjust-  
!
!
CUSTOM Adjusted time alignment that  
you can create  
TA :OFF Turns Time Alignment off  
Adjusting the speaker output levels  
ments are necessary, perform step 4 to stop the  
test tone.  
1
Use M.C. to select FRONT-L (speaker  
#
The settings for speakers with the size set to  
output level) in the audio function menu.  
Refer to Introduction of DSP adjustments on  
page 33.  
#
If auto TA and EQ have not been carried out,  
OFF will not be displayed. (Refer to Setting the  
speaker setting on the previous page.)  
you cannot select AUTO TA. In this case,  
SET A-TA is displayed.  
3
Press a or b to adjust the speaker out-  
2
Press c or d to select the speaker to be  
Adjusting time alignment  
The distance between the selected position  
and each speaker can be adjusted.  
put level.  
adjusted.  
+10 to 10 is displayed as the level is in-  
creased or decreased.  
#
speaker after about two seconds after the last op-  
eration.  
FRONT-L (left front speaker)CENTER (center  
speaker)FRONT-R (right front speaker)—  
REAR-R (right rear speaker)REAR-L (left rear  
speaker)SUB.W (subwoofer)  
The test tone will be emitted from the next  
!
The adjusted time alignment is stored in  
CUSTOM.  
#
Speakers with the size set to OFF cannot be  
selected. (Refer to Setting the speaker setting on  
the previous page.)  
4
Press c to stop the test tone output.  
38  
39  
En  
En  
Section  
Section  
03  
Available accessories  
Available accessories  
03  
2
Press c or d to select the desired item.  
!
Be sure to perform auto TA and EQ using  
the optional microphone. Using another  
microphone may prevent measurement, or  
result in incorrect measurement of the  
cars interior acoustic characteristics.  
In order to perform auto TA and EQ, the  
front speaker must be connected.  
When this unit is connected to a power  
amp with input level control, auto TA and  
EQ may not be possible if the power amps  
input level is set below the standard level.  
When this unit is connected to a power  
amp with an LPF, turn this LPF off before  
performing auto TA and EQ. Also set the  
cut-off frequency for the built-in LPF of an  
active subwoofer to the highest frequency.  
The time alignment value resulting from  
auto TA and EQ has been calculated by a  
computer and is the optimum delay time  
that will give accurate results. Be sure to  
use the resulting value although it may dif-  
fer from the actual distance when:  
The reflected sound within the car is  
strong and delays occur.  
The LPF on active subwoofers or exter-  
nal amps delay the lower sounds.  
Auto TA and EQ changes the audio settings  
as follows:  
The fader/balance settings return to the  
center position. (Refer to Using fader/  
balance adjustment on page 34.)  
The equalizer curve switches to FLAT.  
(Refer to Recalling equalizer curves on  
the previous page.)  
Recalling equalizer curves  
Auto TA and EQ (auto-time  
alignment and auto-equalizing)  
PEQ FRONT (speakers)FRONT:LOW  
(bands)F LOW : 80 (center frequency)—  
F LOW : 0 (equalizer level)LOW 0 :WIDE (Q  
factor)  
There are seven stored equalizer curves which  
you can easily recall at any time. Here is a list  
of the equalizer curves.  
Auto-time alignment automatically adjusts the  
time alignment according to the distance be-  
tween the listening position and each speaker.  
The auto-equalizer automatically measures  
the cars interior acoustic characteristics, and  
then creates an auto-equalizer curve based on  
that information.  
!
The equalizer curves for CUSTOM1 and  
CUSTOM2 can be adjusted.  
!
!
3
Press d to select the speakers setting  
!
When FLAT, no changes are made to the  
sound. You can check the effects of the  
equalizer curves by switching alternatively  
between FLAT and another equalizer curve.  
and then a or b to select the speaker to be  
adjusted.  
FRONT (front speakers)CENTER (center  
speaker)REAR (rear speakers)  
!
To perform this function, dedicated micro-  
phone (e.g. CD-MC20) is required.  
#
Speakers with the size set to OFF cannot be  
1
Use M.C. to select POWERFUL (equali-  
!
!
selected. (Refer to Setting the speaker setting on  
page 37.)  
zer recall) in the audio function menu.  
Refer to Introduction of DSP adjustments on  
page 33.  
WARNING  
As a loud tone (noise) may be emitted from the  
speakers when measuring the cars interior  
acoustic characteristics, never perform auto TA  
or auto EQ while driving.  
4
Press d to select the band setting and  
then press a or b to select the equalizer  
band to be adjusted.  
LOW (low)MID (mid)HI (high)  
2
Press c or d to select the equalizer.  
POWERFULNATURALVOCALFLAT—  
CUSTOM1CUSTOM2SUPER-BASS  
5
Press d to select the center frequency  
CAUTION  
setting and then press a or b to select the  
center frequency of selected band.  
40506380100125160200—  
2503154005006308001K—  
1.2K1.6KHZ2K2.5K3.1K4K5K  
6.3K8K10K12K (Hz)  
Adjusting the 3-band parametric  
equalizer  
For CUSTOM1 and CUSTOM2 equalizer  
curves, you can adjust the front, rear and cen-  
ter equalizer curves separately by selecting a  
center frequency, an equalizer level and a Q  
factor for each band.  
!
Thoroughly check the conditions before per-  
forming auto TA and EQ as the speakers may  
be damaged if these functions are performed  
when:  
The speakers are incorrectly connected.  
(For example, when a rear speaker is con-  
nected as a subwoofer output.)  
A speaker is connected to a power amp de-  
livering output higher than the speakers  
maximum input power capability.  
!
6
Press d to select the equalizer level set-  
!
!
!
A separate CUSTOM1 curve can be cre-  
ated for each source.  
A CUSTOM2 curve that is common for all  
sources can be created.  
The center speaker largely determines the  
sound image and getting the balance right  
is not easy. We recommend that you first  
adjust the balance among all of the speak-  
ers except the center speaker, by playing 2-  
channel audio (a CD, for example). Then,  
play 5.1-channel audio (Dolby Digital or  
DTS) and adjust the center speaker output  
to match the balance already created  
among the other speakers.  
ting and then press a or b to adjust the  
equalizer level.  
+6 to 6 is displayed as the level is increased  
or decreased.  
!
If the microphone is placed in an unsuitable  
position the measurement tone may become  
loud and measurement may take a long time,  
resulting in battery drainage. Be sure to place  
the microphone in the specified location.  
7
Press d to select the Q factor setting  
and then press a or b to select the desired  
Q factor.  
WID (wide)NAR (narrow)  
When a subwoofer is connected to this  
unit, it will be adjusted automatically to  
both subwoofer output and high pass fil-  
ter setting for rear speaker.  
Previous settings for auto TA and EQ will be  
overwritten.  
#
Adjust the parameters of each band for the  
other speakers in the same way.  
Before operating the auto TA and EQ  
function  
!
8
Press B (BAND/ESC) to return to the or-  
!
Perform auto TA and EQ in a quiet place,  
with both the car engine and air condition-  
ing switched off. Also turn off any car  
phones or portable telephones in the car, or  
remove them from the car. Sounds other  
than the measurement tone (such as sur-  
rounding sounds, engine sound, tele-  
phones ringing) may prevent correct  
measurement of the cars interior acoustic  
characteristics.  
dinary display.  
Note  
Performing auto TA and EQ  
Stop the car in a place that is quiet,  
1
Use M.C. to select PEQ (3-band para-  
A center frequency can be selected for each  
band and can be changed in 1/3-octave steps.  
However, the interval between the selected center  
frequencies cannot be shorter than 1 octave.  
metric equalizer) in the audio function  
1
menu.  
close all the doors, windows and sun roof,  
and then turn the engine off.  
If the engine is left running, the noise from the  
engine may cause incorrect auto TA and EQ.  
Refer to Introduction of DSP adjustments on  
page 33.  
#
Adjusted PEQ settings are memorized in  
CUSTOM1 in the audio function menu.  
40  
41  
En  
En  
Section  
Section  
03  
Available accessories  
Connections  
04  
!
!
Secure all wiring with cable clamps or electri-  
cal tape. Do not allow any bare wiring to re-  
main exposed.  
2
Fix the optional microphone in the cen-  
7
Plug the microphone into the micro-  
WARNING  
ter of the headrest of the drivers seat, fa-  
cing forward.  
The auto TA and EQ may differ depending on  
where you place the microphone. If desired,  
place the microphone on the front passenger  
seat to perform auto TA and EQ.  
phone input jack on the multi-channel pro-  
cessor.  
!
!
To avoid the risk of accident and the potential  
violation of applicable laws, the front DVD or  
TV (sold separately) feature should never be  
used while the vehicle is being driven. Also,  
rear displays should not be in a location  
where they are visibly distracting to the driver.  
In some countries or states the viewing of  
images on a display inside a vehicle even by  
persons other than the driver may be illegal.  
Where such regulations apply, they must be  
obeyed and this units DVD features should  
not be used.  
Do not drill a hole into the engine compart-  
ment to connect the yellow cable of the dis-  
play unit to the vehicle battery. Engine  
vibration may eventually cause the insulation  
to fail at the point where the wire passes from  
the passenger compartment into the engine  
compartment. Take extra care in securing the  
wire at this point.  
It is extremely dangerous to allow the display  
lead to become wound around the steering  
column or gearshift. Be sure to install the dis-  
play in such a way that it will not obstruct driv-  
ing.  
Make sure that wires will not interfere with  
moving parts of the vehicle, such as the gear-  
shift, parking brake or seat sliding mechan-  
ism.  
Do not shorten any cables. If you do, the pro-  
tection circuit may fail to work properly.  
!
!
!
Use speakers over 50 W (output value) and be-  
tween 4 W to 8 W (impedance value). Do not  
use 1 W to 3 W speakers for this unit.  
8
9
Press M.C. to start the auto TA and EQ.  
When the 10-second countdown starts,  
!
!
The black cable is ground. When installing  
this unit or power amp (sold separately), make  
sure to connect the ground wire first. Ensure  
that the ground wire is properly connected to  
metal parts of the cars body. The ground wire  
of the power amp and the one of this unit or  
any other device must be connected to the car  
separately with different screws. If the screw  
for the ground wire loosens or falls out, it  
could result in fire, generation of smoke or  
malfunction.  
3
Turn the ignition switch to ON or ACC.  
get out of the car and close the door within  
10 seconds.  
If the air conditioner or heater is turned on,  
turn it off. The noise from the fan may cause  
incorrect auto TA and EQ.  
The measurement tone (noise) is outputted  
from the speakers, and auto TA and EQ be-  
gins.  
#
Press S (SRC/OFF) to turn the source on if this  
Notes  
!
unit is turned off.  
#
When all speakers are connected, auto TA  
This unit cannot be installed in a vehicle with-  
out ACC (accessory) position on the ignition  
switch.  
and EQ is completed in about nine minutes.  
4
Select the position for the seat on  
#
#
To stop auto TA and EQ, press any keys.  
To cancel auto TA and EQ part way through,  
which the microphone is placed.  
Refer to Using the position selector on page  
34.  
press B (BAND/ESC).  
POWER AMP  
Ground wire  
#
If no position is selected before auto TA and  
10 When auto TA and EQ is completed,  
COMPLETE is displayed.  
EQ is started, F/L is automatically selected.  
When the cars interior acoustic characteris-  
tics cannot be measured correctly, an error  
message will be displayed. (Refer to Auto TA  
and EQ error messages on page 59.)  
5
Press and hold S (SRC/OFF) until the  
ACC position  
No ACC position  
unit turns off.  
!
!
Use this unit with a 12-volt battery and nega-  
tive grounding only. Failure to do so may result  
in a fire or malfunction.  
To prevent a short-circuit, overheating or mal-  
function, be sure to follow the directions  
below.  
Disconnect the negative terminal of the  
battery before installation.  
Secure the wiring with cable clamps or ad-  
hesive tape. Wrap adhesive tape around  
wiring that comes into contact with metal  
parts to protect the wiring.  
6
Press and hold 1/S.Rtrv to enter the  
auto TA and EQ measurement mode.  
11 Press B (BAND/ESC) to cancel the auto  
TA and EQ mode.  
Other devices  
(Another electronic  
device in the car)  
Metal parts of cars body  
#
You can also perform this operation by press-  
ing and holding A.MENU on the remote control.  
12 Store the microphone carefully in the  
glove compartment or another safe place.  
If the microphone is subjected to direct sun-  
light for an extended period, high tempera-  
tures may cause distortion, color change or  
malfunction.  
CAUTION  
!
PIONEER does not recommend that you in-  
stall or service your display unit yourself. In-  
stalling or servicing the product may expose  
you to risk of electric shock or other hazards.  
Refer all installation and servicing of your dis-  
play unit to authorized Pioneer service person-  
nel.  
Place all cables away from moving parts,  
such as the gear shift and seat rails.  
Place all cables away from hot places,  
such as near the heater outlet.  
42  
43  
En  
En  
Section  
Section  
04  
Connections  
Connections  
04  
Do not connect the yellow cable to the bat-  
tery by passing it through the hole to the  
engine compartment.  
Cover any disconnected cable connectors  
with insulating tape.  
Do not shorten any cables.  
Never cut the insulation of the power cable  
of this unit in order to share the power  
with other devices. The current capacity of  
the cable is limited.  
Use a fuse of the rating prescribed.  
Never wire the negative speaker cable di-  
rectly to ground.  
Never band together negative cables of  
multiple speakers.  
!
When this unit is on, control signals are sent  
through the blue/white cable. Connect this  
cable to the system remote control of an exter-  
nal power amp or the vehicles auto-antenna  
relay control terminal (max. 300 mA 12 V DC).  
If the vehicle is equipped with a glass anten-  
na, connect it to the antenna booster power  
supply terminal.  
!
!
Never connect the blue/white cable to the  
power terminal of an external power amp.  
Also, never connect it to the power terminal of  
the auto antenna. Doing so may result in bat-  
tery drain or a malfunction.  
IP-BUS connectors are color-coded. Be sure  
to connect connectors of the same color.  
44  
45  
En  
En  
Section  
Section  
04  
Connections  
Connections  
04  
Power cable connection  
Wired remote input  
Hard-wired remote control  
adaptor can be connected  
(sold separately).  
This product  
IP-BUS input (Blue)  
Antenna jack  
IP-BUS cable  
(sold separately)  
When you connect the separately sold  
multi-channel processor (DEQ-P7650) to this  
unit, do not connect anything to the speaker  
leads and system remote control (blue/white).  
Pioneer IP-BUS  
accessories  
(sold separately)  
Black (chassis ground)  
Connect to a clean, paint-free metal location.  
Blue/white  
With a 2 speaker system, do not connect  
anything to the speaker leads that are not  
connected to speakers.  
Connect to system control terminal of the  
power amp or auto-antenna relay control  
terminal (max. 300 mA 12 V DC).  
Fuse (10 A)  
Yellow  
White  
Gray  
Connect to the constant 12 V supply terminal.  
Front speaker  
Front speaker  
Fuse resistor  
White/black  
Green  
Gray/black  
Violet  
Left  
Right  
Red  
Connect to terminal controlled by ignition switch (12 V DC).  
Rear speaker  
Rear speaker  
Green/black  
Violet/black  
46  
47  
En  
En  
 
Section  
Section  
04  
Connections  
Connections  
04  
When connecting to separately sold power amp  
Connect with RCA cables  
(sold separately)  
Power amp (sold  
separately)  
Power amp (sold  
separately)  
Front output  
Rear output  
This product  
Blue/white  
Connect to system control terminal of the power  
amp or auto-antenna relay control terminal  
(max. 300 mA 12 V DC).  
System remote control  
Left  
Right  
Front speaker  
Front speaker  
When you connect separately sold multi-channel  
processor (e.g. DEQ-P7650) to this unit, do not  
connect anything to the speaker leads and system  
remote control (blue/white).  
Rear speaker  
Rear speaker  
Note:  
When you connect multi-channel processor to  
this unit, separately sold power amp must be  
connected to multi-channel processor.  
Perform these connections when  
using the optional amplifier.  
48  
49  
En  
En  
Section  
Section  
04  
Connections  
Connections  
04  
2
Connect the optical cable to the optical  
When connecting with a multi-channel processor  
Connecting and installing the  
optical cable connection box  
cable connection box.  
AV system display  
(sold separately)  
WARNING  
RCA cable  
(sold separately)  
To video input  
!
Avoid installing the optical cable connection  
box in locations where the operation of safety  
devices such as airbags is prevented by this  
unit. Otherwise, there is a danger of a fatal ac-  
cident.  
1
1 Optical cable  
!
!
Avoid installing the optical cable connection  
box in locations where the operation of the  
brake may be prevented. Otherwise, it may re-  
sult in a traffic accident.  
Fix the optical cable connection box securely  
with the hook and loop fastener or lock tie. If  
the unit is loose, it disturbs driving stability,  
which may result in a traffic accident.  
Video output  
(VIDEO OUTPUT)  
Installing the optical cable  
connection box  
15 cm  
This product  
%
When installing the optical cable con-  
nection box with the hook and loop fasten-  
er.  
Black  
Install the optical cable connection box using  
the hook and loop fastener in the ample space  
of the console box.  
CAUTION  
Blue  
DEQ output  
!
!
Install this unit using only the parts supplied  
with this unit. If other parts are used, this unit  
may be damaged or could dismount itself,  
which leads to an accident or other problems.  
Do not install this unit near the doors where  
rainwater is likely to be spilled on the unit. In-  
cursion of water into the unit may cause  
smoke or fire.  
Black  
Blue  
Optical cable connection  
box (CD-DD25)  
(sold separately)  
1
2
RCA cable  
(supplied with multi-  
channel processor)  
Optical cable  
(supplied with multi-  
channel processor)  
IP-BUS cable  
1 Hook fastener  
(supplied with multi-channel  
processor)  
Connecting the optical cable  
2 Loop fastener  
Blue  
1
Connect the optical cable and ground  
%
When installing the optical cable con-  
nection box with the lock tie.  
Wrap the optical cable and connection box  
with the protection tape and fasten with the  
power code using the lock tie.  
lead to the main unit.  
Connect the optical cable so that it does not  
protrude from the main unit, as shown in the  
illustration. Fasten the ground lead to the pro-  
trusion on the back of the main unit.  
Multi-channel processor  
(DEQ-P7650)  
(sold separately)  
1
Blue  
Black  
Pioneer IP-BUS  
accessories  
(sold separately)  
2
1
IP-BUS cable  
1 Wrap with the protection tape  
1 Screw  
2 Fasten with the lock tie  
50  
51  
En  
En  
Section  
Section  
04  
Connections  
Installation  
05  
Important  
2
Secure the mounting sleeve by using a  
When using a display  
connected to video outputs  
When connecting the  
external video component  
It is necessary to set VIDEO IN to AUX in initi-  
al settings when connecting the external video  
component.  
screwdriver to bend the metal tabs (90°)  
into place.  
!
!
!
Check all connections and systems before  
final installation.  
Do not use unauthorized parts as this may  
cause malfunctions.  
Consult your dealer if installation requires dril-  
ling of holes or other modifications to the vehi-  
cle.  
Do not install this unit where:  
it may interfere with operation of the vehi-  
cle.  
WARNING  
Never install the display in a location where it is  
visible to the driver while driving.  
1
External video component  
(sold separately)  
Display with  
RCA input jacks  
(sold separately)  
!
2
it may cause injury to a passenger as a re-  
sult of a sudden stop.  
1 Dashboard  
2 Mounting sleeve  
To video input  
To video  
output  
To audio  
output  
!
!
The semiconductor laser will be damaged if it  
overheats. Install this unit away from hot  
places such as near the heater outlet.  
Optimum performance is obtained when the  
unit is installed at an angle of less than 30°.  
3
Install the unit as illustrated.  
Use commercially available parts when instal-  
ling.  
RCA cable  
(sold  
separately)  
RCA cable  
(sold  
separately)  
1
2
RCA cable  
(sold separately)  
Video input  
(VIDEO INPUT)  
3
4
Video output  
(VIDEO OUTPUT)  
!
To ensure proper heat dispersal when using  
this unit, make sure you leave ample space  
behind the rear panel and wrap any loose  
cables so they are not blocking the vents  
when installing the unit.  
5
15 cm  
This product  
1 Nut  
2 Firewall or metal support  
3 Metal strap  
4 Screw  
5 Screw (M4 × 8)  
Make sure that the unit is installed securely in  
15 cm  
This product  
DIN front/rear mount  
This unit can be properly installed using either  
front-mount or rear-mount installation.  
Audio input  
#
place. An unstable installation may cause skip-  
ping or other malfunctions.  
DIN Front-mount  
1
Insert the mounting sleeve into the  
dashboard.  
For installation in shallow spaces, use the sup-  
plied mounting sleeve. If there is enough  
space, use the mounting sleeve that came  
with the vehicle.  
52  
53  
En  
En  
Section  
Appendix  
05  
Installation  
Additional Information  
3
Pull the unit out of the dashboard.  
DIN Rear-mount  
Troubleshooting  
1
Determine the appropriate position  
Common  
where the holes on the bracket and the  
side of the unit match.  
Symptom  
Cause  
Action (Reference page)  
The power will not turn on.  
The unit will not operate.  
Leads and connectors are incor-  
rectly connected.  
Confirm once more that all connections are  
correct.  
The fuse is blown.  
Rectify the cause and then replace the fuse.  
Be sure to install a fuse with the same rating.  
Noise and/or other factors are caus- Turn the unit off and then on. (Page 9)  
ing the built-in microprocessor to  
operate incorrectly.  
Removing and re-attaching the  
front panel  
You can remove the front panel to protect your  
unit from theft.  
For details, refer to Removing the front panel to  
protect your unit from theft and Re-attaching  
the front panel on page 9.  
2
Tighten two screws on each side.  
Operation with the remote con- The remote control operation mode Switch to the correct remote control mode.  
trol is not possible.  
is incorrect.  
(Page 8)  
3
The unit does not operate cor-  
rectly even when the appropriate  
remote control buttons are  
pressed.  
1
Battery power is low.  
Load a new battery.  
Try operating with another disc.  
Some operations are prohibited  
with certain discs.  
2
Playback is not possible.  
The disc is dirty.  
Clean the disc. (Page 60)  
Check the disc type.  
The type of disc loaded cannot be  
played on this unit.  
1 Truss screw (5 mm × 8 mm)  
2 Mounting bracket  
3 Dashboard or console  
The disc loaded is not compatible  
with this video system.  
Change the disc to one that is compatible  
with your video system.  
There is no sound.  
Cables are not connected correctly. Connect the cables correctly.  
The volume level will not rise.  
The unit is performing still, slow mo- There is no sound during still, slow motion or  
Removing the unit  
tion or frame-by-frame playback.  
frame-by-frame playback.  
1
Remove the trim ring.  
The icon is displayed, and op- The operation is prohibited for the  
This operation is not possible.  
eration is not possible.  
disc.  
The operation is not compatible  
with the configuration of the disc.  
This operation is not possible.  
The image displayed stops  
The data could no longer be read  
Stop playback once, and start playback again.  
(pauses) and the unit cannot be during playback.  
operated.  
There is no sound.  
The volume level is low.  
The volume level is low.  
Adjust the volume level.  
Turn the attenuator off.  
Firmly secure the unit.  
The attenuator is on.  
1 Trim ring  
2 Notched tab  
The sound and video skip.  
The unit is not firmly secured.  
!
Releasing the front panel allows easier ac-  
cess to the trim ring.  
File size and transmission rate are  
above recommended rates.  
Create a DivX file that is within the recom-  
mended size and transmission rate.  
!
When reattaching the trim ring, point the  
side with the notched tab down.  
The aspect ratio is incorrect and The aspect ratio setting is incorrect Select the appropriate setting for your display.  
the image is stretched.  
for the display.  
(Page 26)  
The motor sounds when the  
ignition switch is turned ON (or not a disc is loaded.  
is turned to ACC).  
The unit is confirming whether or  
This is a normal operation.  
2
Insert the supplied extraction keys into  
both sides of the unit until they click into  
place.  
No xxxx appears when a dis-  
There is no embedded text informa- Switch the display or play another track/file.  
play is changed (No Title, for ex- tion.  
ample).  
54  
55  
En  
En  
Appendix  
Appendix  
Additional Information  
Additional Information  
iPod  
Symptom  
Symptom  
Cause  
Action (Reference page)  
Cause  
Action  
The repeat range changes auto- Another folder was selected during Select the repeat range again.  
matically.  
repeat play.  
The iPod does not operate cor-  
rectly.  
The cables are incorrectly con-  
nected.  
Disconnect the cable from the iPod. Once the  
iPods main menu is displayed, reconnect the  
iPod and reset it.  
Track search or fast forward/reverse Select the repeat range again.  
was performed during file repeat  
play.  
The iPod version is old.  
Update the iPod version.  
DVD  
Multi-channel processor  
Symptom  
Symptom  
Cause  
Action (Reference page)  
Cause  
Action (Reference page)  
Playback is not possible.  
The loaded disc has a different re-  
gion number from this unit.  
Replace the disc with one featuring the same  
region number as this unit.  
There is no sound.  
The volume level will not rise.  
The optical cables are not con-  
nected correctly.  
Connect the cables correctly.  
A parental lock message is dis- Parental lock is activated.  
played and playback is not pos-  
sible.  
Turn parental lock off or change the level.  
(Page 27)  
Audio output is 2-channel audio The digital output setting is set to  
Normally, set the digital output setting to  
STREAM. (Page 28)  
even though multi-channel  
audio is selected.  
Linear PCM.  
Parental lock cannot be can-  
celed.  
The code number is incorrect.  
Enter the correct code number. (Page 27)  
You have forgotten your code num- Press CLEAR 10 times to cancel the code  
ber. number. (Page 28)  
Dialog language (and subtitle  
language) cannot be switched. ture multiple language recordings. not recorded on the disc.  
The DVD being played does not fea- The language cannot be switched if they are  
Error messages  
When you contact your dealer or your nearest Pioneer Service Center, be sure to note the error  
message.  
You can only switch between items Switch the language using the disc menu.  
indicated in the disc menu.  
No subtitles are displayed.  
The DVD being played does not fea- Subtitles are not displayed if they are not re-  
ture subtitles. corded on the disc.  
DVD  
You can only switch between items Switch the language using the disc menu.  
indicated in the disc menu.  
Message  
Cause  
The disc does not have the same re- Replace the DVD with one bearing the correct  
gion number as this unit. region number.  
Action  
REGION ERR (DIFFERENT RE-  
GION DISC)  
Playback is not performed with The DVD being played does not fea- The language cannot be switched if the se-  
the audio language and subtitle ture dialog or subtitles in the se- lected language is not recorded on the disc.  
FRMT READ (FORMAT READ) Sometimes there is a delay between Wait until the message disappears and you  
the start of playback and when you hear sound.  
language settings selected in  
SETUP.  
lected language.  
start to hear any sound.  
The viewing angle cannot be  
switched.  
The DVD being played does not fea- The viewing angle cannot be switched if the  
ture scenes shot from multiple an- DVD does not feature scenes recorded from  
ERROR-02-XX  
The disc is dirty.  
Clean the disc.  
The disc is scratched.  
The disc is loaded upside down.  
Replace the disc.  
gles.  
multiple angles.  
Check that the disc is loaded correctly.  
You are trying to switch to multi-  
Switch between multiple angles when watch-  
angle viewing for a scene that was ing scenes recorded from multiple angles.  
not recorded from multiple angles.  
PROTECT (PROTECTED DISC)  
SKIPPED (FILE SKIPPED)  
All the files on the inserted disc are Replace the disc.  
embedded with DRM.  
The image is extremely unclear/ Some discs feature a signal to pro- Since this unit is compatible with the analog  
The inserted disc contains DRM  
protected files.  
Select the playable file.  
distorted and dark during play- hibit copying.  
back.  
copy generation management system, when  
playing a disc that has a signal prohibiting  
copying, horizontal stripes or other imperfec-  
tions may appear when viewed on some dis-  
plays. This is not a malfunction.  
HEAT (THERMAL PROTECTION The temperature of the unit is out-  
IN MOTION)  
Wait until the unit returns to a temperature  
within the normal operating limits.  
side the normal operating range.  
EXPIRED (THIS DivX RENTAL  
HAS EXPIRED.)  
The inserted disc contains expired  
DivX VOD content.  
Select the playable file.  
Video CD  
WRITE FAIL (CAN NOT SAVE  
DATA)  
This units flash memory used as  
the temporary storage area is full.  
Select the playable file.  
Symptom  
Cause  
Action  
ERROR (YOUR DEVICE IS NOT This units DivX registration code  
AUTHORIZED TO PLAY THIS  
DivX PROTECTED VIDEO)  
Register this unit to the DivX VOD contents  
The PBC (playback control)  
menu cannot be called up.  
The Video CD being played does not This operation is not available for Video CDs  
feature PBC. that do not feature PBC.  
has not been authorized by the DivX provider.  
VOD contents provider.  
Repeat play and track/time  
search are not possible.  
The Video CD being played features This operation is not available for Video CDs  
PBC. that feature PBC.  
56  
57  
En  
En  
Appendix  
Appendix  
Additional Information  
Additional Information  
Message  
Cause  
Action  
Message  
Cause  
Action  
NON-PLAY (UNPLAYABLE  
DISC)  
This type of disc cannot be played  
on this unit.  
Replace the disc with one that can be played  
on this unit.  
WRITE FAIL (CAN NOT SAVE  
DATA)  
This units flash memory used as  
the temporary storage area is full.  
Select a file that can be played.  
The inserted disc does not contain Replace the disc.  
any playable files.  
ERROR (YOUR DEVICE IS NOT This units DivX registration code  
Register this unit to the DivX VOD contents  
AUTHORIZED TO PLAY THIS  
DivX PROTECTED VIDEO)  
has not been authorized by the DivX provider.  
VOD contents provider.  
NON-PLAY (VIDEO RESOLU-  
TION NOT SUPPORTED)  
The inserted disc contains a high  
definition DivX file.  
Select a file that can be played.  
NON-PLAY (UNPLAYABLE FILE) This type of file cannot be played on Select the playable file.  
this unit.  
NON-PLAY (UNPLAYABLE FILE) This type of file cannot be played on Select a file that can be played.  
this unit.  
There are no songs.  
Transfer the audio files to the USB portable  
audio player/USB memory and connect.  
NON-PLAY (VIDEO FRAME-  
RATE NOT SUPPORTED)  
DivX files frame rate is more than  
30 fps.  
Select a file that can be played.  
Security for the connected USB  
memory is enabled.  
Follow the USB memory instructions to dis-  
able security.  
NO AUDIO (AUDIO FORMAT  
NOT SUPPORTED)  
This type of file is not supported on Select a file that can be played.  
this unit.  
NON-PLAY (VIDEO RESOLU-  
TION NOT SUPPORTED)  
The inserted external storage device Select a file that can be played.  
contains a high definition DivX file.  
NON-PLAY (VIDEO FRAME-  
RATE NOT SUPPORTED)  
DivX files frame rate is more than  
30 fps.  
Select a file that can be played.  
USB audio player/USB memory  
Message Cause  
Action  
NO AUDIO (AUDIO FORMAT  
NOT SUPPORTED)  
This type of file is not supported on Select a file that can be played.  
this unit.  
FRMT READ (FORMAT READ) Sometimes there is a delay between Wait until the message disappears and you  
the start of playback and when you hear sound.  
start to hear any sound.  
iPod  
SKIPPED (FILE SKIPPED)  
The connected USB portable audio Play an audio file not embedded with  
player/USB memory contains WMA Windows Media DRM 9/10.  
files that are protected by Windows  
Message  
Cause  
Action  
FRMT READ (FORMAT READ)/ Sometimes there is a delay between Wait until the message disappears and you  
Ready  
Mediaä DRM 9/10.  
the start of playback and when you hear sound.  
start to hear any sound.  
PROTECT (NO ACCESSIBLE  
DATA AVAILABLE)  
All the files on the connected USB Transfer audio files not protected by Windows  
portable audio player/USB memory Media DRM 9/10 to the USB portable audio  
are protected by Windows Media  
DRM 9/10.  
ERROR-02-6X  
Communication failed.  
Disconnect the cable from the iPod. Once the  
iPods main menu is displayed, reconnect the  
iPod and reset it.  
player/USB memory and connect.  
N/A USB (INCOMPATIBLE DE- The USB device connected to is not Connect a USB portable audio player or USB  
iPod failure.  
Reset the iPod.  
VICE)  
supported by this unit.  
memory that is USB Mass Storage Class  
compliant.  
ERROR-02-67  
The iPod firmware version is old.  
Update the iPod version.  
N/A USB (INCOMPATIBLE DE- Non-compatible iPod  
VICE)  
Disconnect your device and replace it with a  
compatible iPod.  
The USB device is not formatted  
with FAT16 or FAT32.  
The connected USB device should be for-  
matted with FAT16 or FAT32.  
STOP  
There are no songs.  
Transfer songs to the iPod.  
CHECK USB  
The USB connector or USB cable  
has short-circuited.  
Check that the USB connector or USB cable  
is not caught in something or damaged.  
There are no songs in the current  
list.  
Select a list that contains songs.  
The connected USB portable audio Disconnect the USB portable audio player/  
player/USB memory consumes USB memory and do not use it. Turn the igni-  
more than 500 mA (maximum allow- tion switch to OFF, then to ACC or ON and  
NOT FOUND  
No related songs.  
Transfer songs to the iPod.  
able current).  
then connect a compliant USB portable  
audio player/USB memory.  
ERROR-02-DX  
Communication failed.  
Perform one of the following operations.  
Turn the ignition switch OFF and back ON.  
Disconnect the USB portable audio player/  
USB memory.  
Auto TA and EQ error messages  
When correct measurement of cars interior acoustic characteristics is not possible using auto TA  
and EQ, an error message may appear on the display. In such cases, refer to the table below to  
see what the problem is and how it may be corrected. After checking, try again.  
Change to a different source.  
Then, return to the USB portable audio  
player/USB memory.  
EXPIRED (THIS DivX RENTAL  
HAS EXPIRED.)  
The inserted external storage device Select a file that can be played.  
contains expired DivX VOD content.  
58  
59  
En  
En  
 
Appendix  
Appendix  
Additional Information  
Additional Information  
USB storage device  
About iPod settings  
Message  
Cause  
Action  
!
When an iPod is connected, this unit changes the  
EQ (equalizer) setting of the iPod to off in order to  
optimize the acoustics. When you disconnect the  
iPod, the EQ returns to the original setting.  
You cannot set Repeat to off on the iPod when  
using this unit. Repeat is automatically changed  
to All when the iPod is connected to this unit.  
ERROR-MIC  
The microphone is not connected.  
Plug the optional microphone securely into  
the jack.  
Depending on the external storage device (USB), the  
following problems may occur.  
!
!
!
Operations may vary.  
The storage device may not be recognized.  
Files may not be played back properly.  
ERROR-FSP, ERROR-FLSP,  
ERROR-FRSP, ERROR-CSP,  
ERROR-RSP, ERROR-RLSP,  
ERROR-RRSP, ERROR-SW  
The microphone cannot pick up the ! Confirm that the speakers are connected  
measuring tone of a speaker.  
correctly.  
!
! Correct the input level setting of the power  
amp connected to the speakers.  
! Set the microphone correctly.  
USB storage device  
Incompatible text saved on the iPod will not be dis-  
played by the unit.  
ERROR-NOIS  
The surrounding noise level is too  
high.  
! Stop your car in a place that is quiet, and  
switch off the engine, air conditioner and hea-  
ter.  
Connections via USB hub are not supported.  
Do not connect anything other than a USB storage  
device.  
! Set the microphone correctly.  
DVD-R/DVD-RW discs  
Unfinalized DVD-R/-RW discs which have been re-  
corded in the Video format (video mode) cannot be  
played back.  
Playback of DVD-R/DVD-RW discs may not be possi-  
ble, due to disc characteristics, scratches or dirt on  
the disc, or dirt, condensation, etc. on the lens of this  
unit.  
Firmly secure the USB storage device when driving.  
Do not let the USB storage device fall onto the floor,  
where it may become jammed under the brake or ac-  
celerator pedal.  
Handling guidelines  
Discs and player  
Store discs in their cases when not in use.  
Depending on the USB storage device, the device  
may cause noise to occur in the radio.  
Do not attach labels, write on or apply chemicals to  
the surface of the discs.  
Depending on the application settings and the envir-  
onment, playback of discs recorded on a personal  
computer may not be possible. (For details, contact  
the manufacturer of the application.)  
Use only discs featuring any of following logos.  
Copyright protected files that are stored in the USB  
devices cannot be played back.  
To clean a disc, wipe the disc with a soft cloth out-  
ward from the center.  
You cannot connect a USB portable audio player/USB  
memory to this unit via USB hub.  
Condensation may temporarily impair the players  
performance. Let it rest for about one hour to adjust  
to a warmer temperature. Also, wipe any damp discs  
off with a soft cloth.  
CD-R/CD-RW discs  
Partitioned USB memory is not compatible with this  
unit.  
When CD-R/CD-RW discs are used, playback is possi-  
ble only for discs which have been finalized.  
Playback of CD-R/CD-RW discs recorded on a music  
CD recorder or a personal computer may not be pos-  
sible due to disc characteristics, scratches or dirt on  
the disc, or dirt, condensation, etc., on the lens of this  
unit.  
Depending on the application settings and the envir-  
onment, playback of discs recorded on a personal  
computer may not be possible. (For details, contact  
the manufacturer of the application.)  
Playback of CD-R/CD-RW discs may become impossi-  
ble in case of direct exposure to sunlight, high tem-  
peratures, or the storage conditions in the vehicle.  
Titles and other text information recorded on a CD-R/  
CD-RW disc may not be displayed by this unit (in the  
case of audio data (CD-DA)).  
Depending on the kind of USB portable audio player/  
USB memory you use, the device may not be recog-  
nized or audio files may not be played back properly.  
Playback of discs may not be possible because of  
disc characteristics, disc format, recorded applica-  
tion, playback environment, storage conditions, and  
so on.  
Do not leave the USB portable audio player/USB  
memory in direct sunlight for extended amounts of  
time. Doing so may cause the device to malfunction  
from the extreme rise in temperature.  
Road shocks may interrupt disc playback.  
Read the precautions for discs before using them.  
Use 12-cm discs. Do not use 8-cm discs or an adapter  
for 8-cm discs.  
Certain functions may not be available for some DVD  
video discs.  
iPod  
Use only conventional, fully circular discs. Do not use  
shaped discs.  
It may not be possible to play back some DVD video  
discs.  
To ensure proper operation, connect the dock connec-  
tor cable from the iPod directly to this unit.  
It is not possible to play back DVD-RAM discs.  
Firmly secure the iPod when driving. Do not let the  
iPod fall onto the floor, where it may become jammed  
under the brake or accelerator pedal.  
This unit is not compatible with discs recorded in  
AVCHD (Advanced Video Codec High Definition) for-  
mat. Do not insert AVCHD discs as you may not be  
able to eject the disc.  
DualDiscs  
Do not insert anything other than a DVD (-R/-RW) or  
CD (-R/-RW) into the disc loading slot.  
DualDiscs are two-sided discs that have a recordable  
CD for audio on one side and a recordable DVD for  
video on the other.  
Do not use cracked, chipped, warped, or otherwise  
damaged discs as they may damage the player.  
Playback of the DVD side is possible with this unit.  
However, since the CD side of DualDiscs is not physi-  
cally compatible with the general CD standard, it may  
not be possible to play the CD side with this unit.  
Unfinalized CD-R/CD-RW discs cannot be played  
back.  
Do not touch the recorded surface of the discs.  
60  
61  
En  
En  
 
Appendix  
Appendix  
Additional Information  
Additional Information  
Frequent loading and ejecting of a DualDisc may re-  
sult in scratches on the disc. Serious scratches can  
lead to playback problems on this unit. In some  
cases, a DualDisc may become stuck in the disc load-  
ing slot and will not eject. To prevent this, we recom-  
mend you refrain from using DualDisc with this unit.  
Please refer to the information from the disc manu-  
facturer for more detailed information about  
DualDiscs.  
Important  
DivX compatibility  
USB storage device  
!
!
When naming a JPEG image file, add the cor-  
responding filename extension (.jpg, .jpeg, .  
jpe or .jfif).  
This unit plays back files with these filename  
extensions (.jpg, .jpeg, .jpe or .jfif) as a JPEG  
image file. To prevent malfunctions, do not  
use these extensions for files other than JPEG  
image files.  
Compatible format: DivX video format implemented in  
relation to DivX standards  
Playable folder hierarchy: up to eight tiers (A practical  
hierarchy is less than two tiers).  
File extensions: .avi or .divx  
Playable folders: up to 6 000 (up to 700 for DivX)  
Playable files: up to 65 535  
DivX Ultra format: Not compatible  
DivX HD format: Not compatible  
Playback of copyright-protected files: Not compatible  
DivX files without video data: Not compatible  
Compatible audio codec: MP2, MP3, Dolby Digital  
LPCM: Not compatible  
Partitioned external storage device (USB): Only the  
first playable partition can be played.  
JPEG picture files  
JPEG is short for Joint Photographic Experts Group  
and refers to a still image compression technology  
standard.  
Compressed audio and DivX  
compatibility (disc, USB)  
WMA  
CAUTION  
Bit rate: 8 kbps to 320 kbps (CBR), VBR  
Sampling frequency: 8 kHz to 48 kHz  
Compatible external subtitle file extension: .srt  
DivX plus HD format: Not compatible  
!
!
Pioneer accepts no responsibility for data lost  
on the USB memory/USB portable audio  
player even if that data is lost while using this  
unit.  
Do not leave the discs/external storage device  
(USB) or iPod in places with high  
temperatures.  
Files are compatible with Baseline JPEG and EXIF 2.1  
still images up to a resolution of 8 192 × 7 680. (EXIF  
format is used most commonly with digital still cam-  
eras.)  
File extension: .wma  
Playback of EXIF format files that were processed by a  
personal computer may not be possible.  
Bit rate: 5 kbps to 320 kbps (CBR), VBR  
Sampling frequency: 8 kHz to 48 kHz  
Supplemental information  
There is no progressive JPEG compatibility.  
Only the first 32 characters can be displayed as a file  
name (including the file extension) or a folder name.  
Windows Media Audio Professional, Lossless, Voice/  
DRM Stream/Stream with video: Not compatible  
DivX video files  
This unit may not operate correctly depending on the  
application used to encode WMA files.  
iPod compatibility  
Depending on the composition of the file information,  
such as the number of audio streams or file size,  
there may be a slight delay when playing back discs.  
MP3  
This unit supports only the following iPod models.  
Supported iPod software versions are shown below.  
Older versions may not be supported.  
There may be a slight delay at the start of playback of  
audio files embedded with image data or audio files  
stored on a USB storage device that has numerous  
folder hierarchies.  
File extension: .mp3  
Some special operations may be prohibited due to  
the composition of the DivX files.  
Bit rate: 8 kbps to 320 kbps (CBR), VBR  
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
iPhone 4 (software version 4.0.1)  
iPhone 3GS (software version 4.0.1)  
iPhone 3G (software version 4.0.1)  
Sampling frequency: 8 kHz to 48 kHz (32 kHz, 44.1 kHz,  
48 kHz for emphasis)  
Only DivX files downloaded from a DivX partner site  
are guarantee for proper operation. Unauthorized  
DivX files may not operate properly.  
iPod nano 6th generation (software version 1.0)  
iPod nano 5th generation (software version 1.0.1)  
iPod nano 4th generation (software version 1.0.4)  
iPod nano 3rd generation (software version 1.1.3)  
iPod nano 2nd generation (software version 1.1.3)  
iPod nano 1st generation (software version 1.3.1)  
iPod touch 4th generation (software version 4.1)  
iPod touch 3rd generation (software version 3.1.2)  
iPod touch 2nd generation (software version 3.1.3)  
iPod touch 1st generation (software version 2.2.1)  
iPod classic 160GB (software version 2.0.4)  
iPod classic 120GB (software version 2.0.1)  
iPod classic (software version 1.1.2)  
Disc  
Compatible ID3 tag version: 1.0, 1.1, 2.2, 2.3 (ID3 tag  
Version 2.x is given priority than Version 1.x.)  
Playable folder hierarchy: up to eight tiers (A practical  
hierarchy is less than two tiers).  
DRM rental files cannot be operated until playback is  
started.  
M3u playlist: Not compatible  
Playable folders: up to 700  
MP3i (MP3 interactive), mp3 PRO: Not compatible  
This unit corresponds to a DivX file display of up to  
1 590 minutes 43 seconds. Search operation beyond  
this time limit is prohibited.  
Playable files: up to 999 for CD-R/CD-RW  
Playable files: up to 3 500 for DVD-R/DVD-RW  
AAC  
File system: ISO 9660 Level 1 and 2, Romeo, Joliet,  
UDF 1.02, 1.50, 2.00, 2.01, 2.50 (CD-R/DVD-R)  
Recommended file size: 2 Mbps or less with a trans-  
mission rate of 2 GB or less.  
Compatible format: AAC encoded by iTunes  
File extension: .m4a  
Multi-session playback: Compatible  
The ID code of this unit must be registered to a DivX  
VOD provider in order to playback DivX VOD files. For  
information on ID codes, refer to Displaying the DivXâ  
VOD registration code on page 28.  
Packet write data transfer: Not compatible  
Sampling frequency: 8 kHz to 44.1 kHz  
Bit rate: 8 kbps to 320 kbps  
iPod 5th generation (software version 1.3)  
Regardless of the length of blank sections between  
the songs from the original recording, compressed  
audio discs play with a short pause between songs.  
Depending on the generation or version of the iPod,  
some functions may not be available.  
For more details about DivX, visit the following site:  
Apple Lossless: Not compatible  
Operations may vary depending on the software ver-  
sion of iPod.  
AAC file bought from the iTunes Store (.m4p file ex-  
tension): Not compatible  
62  
63  
En  
En  
Appendix  
Appendix  
Additional Information  
Additional Information  
3 Save the folder containing files on the USB  
storage device.  
However, depending on the system environ-  
ment, you may not be able to specify the play-  
back sequence.  
This product includes technology owned by  
Microsoft Corporation and cannot be used or  
distributed without a license from Microsoft  
Licensing, Inc.  
When using an iPod, an iPod Dock Connector to USB  
Cable is required.  
When you use Pioneer CD-IU50/CD-IU50V interface  
cable, consult your dealer for details.  
About the file/format compatibility, refer to the iPod  
manuals.  
iPod & iPhone  
For USB portable audio players, the sequence  
is different and depends on the player.  
iPhone, iPod, iPod classic, iPod nano, and  
iPod touch are trademarks of Apple Inc., regis-  
tered in the U.S. and other countries.  
Made for iPodand Made for iPhonemean  
that an electronic accessory has been de-  
signed to connect specifically to iPod or  
iPhone, respectively, and has been certified by  
the developer to meet Apple performance  
standards.  
Apple is not responsible for the operation of  
this device or its compliance with safety and  
regulatory standards.  
Please note that the use of this accessory with  
iPod or iPhone may affect wireless perfor-  
mance.  
Audio Book, Podcast: Compatible  
CAUTION  
Copyright and trademark  
Pioneer accepts no responsibility for data lost on  
the iPod, even if that data is lost while this unit is  
used.  
This item incorporates copy protection tech-  
nology that is protected by U.S. patents and  
other intellectual property rights of Rovi  
Corporation. Reverse engineering and disas-  
sembly are prohibited.  
Sequence of audio files  
The user cannot assign folder numbers and  
specify playback sequences with this unit.  
DVD video  
is a trademark of DVD Format/Logo  
Licensing Corporation.  
Example of a hierarchy  
iTunes  
01  
02  
Apple and iTunes are trademarks of Apple  
Inc., registered in the U.S. and other coun-  
tries.  
Dolby Pro Logic II  
Manufactured under license from Dolby  
Laboratories. Dolby, Pro Logic, and the  
double-D symbol are trademarks of Dolby  
Laboratories.  
03  
: Folder  
: Compressed  
audio file  
MP3  
04  
Supply of this product only conveys a license  
for private, non-commercial use and does not  
convey a license nor imply any right to use  
this product in any commercial (i.e. revenue-  
generating) real time broadcasting (terrestrial,  
satellite, cable and/or any other media), broad-  
casting/streaming via internet, intranets and/  
or other networks or in other electronic con-  
tent distribution systems, such as pay-audio or  
audio-on-demand applications. An indepen-  
dent license for such use is required. For de-  
tails, please visit  
01 to 05: Folder  
number  
DivX  
DivXâ, DivX Certifiedâ and associated logos  
are trademarks of DivX, Inc. and are used  
under license.  
05  
1 to 6: Playback  
sequence  
Level 1 Level 2 Level 3 Level 4  
ABOUT DIVX VIDEO: DivXâ is a digital  
video format created by DivX, Inc. This is an of-  
ficial DivX Certifiedâ device that plays DivX  
video. Visit divx.com for more information and  
software tools to convert your files into DivX  
video.  
Disc  
Folder selection sequence or other operation  
may differ depending on the encoding or writ-  
ing software.  
USB storage device  
Playback sequence is the same as recorded  
sequence in the USB storage device.  
To specify the playback sequence, the follow-  
ing method is recommended.  
1 Create a file name that includes numbers that  
specify the playback sequence (e.g., 001xxx.  
mp3 and 009yyy.mp3).  
ABOUT DIVX VIDEO-ON-DEMAND: This  
DivX Certifiedâ device must be registered in  
order to play purchased DivX Video-on-De-  
mand (VOD) movies. To obtain your registra-  
tion code, locate the DivX VOD section in  
Displaying the DivXâ VOD registration code. Go  
to vod.divx.com for more information on how  
to complete your registration.  
WMA  
Windows Media is either a registered trade-  
mark or trademark of Microsoft Corporation in  
the United States and/or other countries.  
2 Put those files into a folder.  
64  
65  
En  
En  
 
Appendix  
Appendix  
Additional Information  
Additional Information  
Specifications  
WMA decoding format ......... Ver. 7, 7.1, 8, 9, 10, 11, 12  
(2 ch audio)  
Language code chart for DVD  
(Windows Media Player)  
AAC decoding format ............ MPEG-4 AAC (iTunes en-  
coded only) (.m4a)  
(Ver. 9.0.3 and earlier)  
DivX decoding format ............ Home Theater Ver. 3, 4, 5.2,  
6 (.avi, .divx)  
General  
Language (code), input code  
Rated power source ............... 14.4 V DC  
(allowable voltage range:  
12.0 V to 14.4 V DC)  
Japanese (ja), 1001  
English (en), 0514  
French (fr), 0618  
Spanish (es), 0519  
German (de), 0405  
Italian (it), 0920  
Chinese (zh), 2608  
Dutch, Flemish (nl), 1412  
Portuguese (pt), 1620  
Swedish (sv), 1922  
Russian (ru), 1821  
Korean (ko), 1115  
Greek (el), 0512  
Dzongkha (dz), 0426  
Ewe (ee), 0505  
Kurdish (ku), 1121  
Komi (kv), 1122  
Cornish (kw), 1123  
Kirghiz, Kyrgyz (ky), 1125  
Latin (la), 1201  
Luxembourgish (lb), 1202  
Ganda (lg), 1207  
Limburgan (li), 1209  
Lingala (ln), 1214  
Kinyarwanda (rw), 1823  
Sanskrit (sa), 1901  
Sardinian (sc), 1903  
Sindhi (sd), 1904  
Northern Sami (se), 1905  
Sangho (sg), 1907  
Sinhala (si), 1909  
Slovak (sk), 1911  
Slovenian (sl), 1912  
Samoan (sm), 1913  
Shona (sn), 1914  
Somali (so), 1915  
Albanian (sq), 1917  
Serbian (sr), 1918  
Swati (ss), 1919  
Esperanto (eo), 0515  
Estonian (et), 0520  
Basque (eu), 0521  
Persian (fa), 0601  
Fulah (ff), 0606  
Finnish (fi), 0609  
Fijian (fj), 0610  
Faroese (fo), 0615  
Western Frisian (fy), 0625  
Irish (ga), 0701  
Gaelic (gd), 0704  
Galician (gl), 0712  
Guarani (gn), 0714  
Gujarati (gu), 0721  
Manx (gv), 0722  
Hausa (ha), 0801  
Hebrew (he), 0805  
Hindi (hi), 0809  
Hiri Motu (ho), 0815  
Croatian (hr), 0818  
Haitian (ht), 0820  
Hungarian (hu), 0821  
Armenian (hy), 0825  
Herero (hz), 0826  
Interlingua (ia), 0901  
Indonesian (id), 0904  
Interlingue (ie), 0905  
Igbo (ig), 0907  
Grounding system ................... Negative type  
Maximum current consumption  
..................................................... 10.0 A  
Dimensions (W × H × D):  
DIN  
USB  
USB standard specification  
..................................................... USB 2.0 full speed  
Maximum current supply .... 500 mA  
USB Class ................................... MSC (Mass Storage Class)  
File system .................................. FAT16, FAT32  
MP3 decoding format ........... MPEG-1 & 2 Audio Layer 3  
WMA decoding format ......... Ver. 7, 7.1, 8, 9, 10, 11, 12  
(2 ch audio)  
(Windows Media Player)  
AAC decoding format ............ MPEG-4 AAC (iTunes en-  
coded only) (.m4a)  
Chassis ..................... 178 mm × 50 mm ×  
163 mm  
Nose ........................... 188 mm × 58 mm × 23 mm  
D
Lao (lo), 1215  
Lithuanian (lt), 1220  
Luba-Katanga (lu), 1221  
Latvian (lv), 1222  
Malagasy (mg), 1307  
Marshallese (mh), 1308  
Maori (mi), 1309  
Macedonian (mk), 1311  
Malayalam (ml), 1312  
Mongolian (mn), 1314  
Marathi (mr), 1318  
Malay (ms), 1319  
Maltese (mt), 1320  
Burmese (my), 1325  
Nauru (na), 1401  
Bokmal (nb), 1402  
Ndebele, North (nd), 1404  
Nepali (ne), 1405  
Ndonga (ng), 1407  
Nynorsk (nn), 1414  
Norwegian (no), 1415  
Ndebele, South (nr), 1418  
Chassis ..................... 178 mm × 50 mm ×  
163 mm  
Nose ........................... 170 mm × 46 mm × 23 mm  
Weight .......................................... 1.4 kg  
Afar (aa), 0101  
Abkhazian (ab), 0102  
Avestan (ae), 0105  
Afrikaans (af), 0106  
Akan (ak), 0111  
Amharic (am), 0113  
Aragonese (an), 0114  
Arabic (ar), 0118  
Sotho, Southern (st), 1920  
Sundanese (su), 1921  
Swahili (sw), 1923  
Tamil (ta), 2001  
Telugu (te), 2005  
Tajik (tg), 2007  
Audio  
(Ver. 9.0.3 and earlier)  
DivX decoding format ............ Home Theater Ver. 3, 4, 5.2,  
6 (.avi, .divx)  
Maximum power output ....... 50 W × 4  
Continuous power output ... 22 W × 4 (50 Hz to  
15 000 Hz, 5 % THD,  
4 W load, both channels dri-  
ven)  
Assamese (as), 0119  
Avaric (av), 0122  
Thai (th), 2008  
FM tuner  
Tigrinya (ti), 2009  
Turkmen (tk), 2011  
Tagalog (tl), 2012  
Tswana (tn), 2014  
Tonga (to), 2015  
Turkish (tr), 2018  
Tsonga (ts), 2019  
Tatar (tt), 2020  
Frequency range ...................... 87.5 MHz to 108.0 MHz  
Usable sensitivity ..................... 9 dBf (0.8 µV/75 W, mono,  
S/N: 30 dB)  
Load impedance ...................... 4 W (4 W to 8 W allowable)  
Preout maximum output level  
..................................................... 2.0 V  
Tone controls:  
Aymara (ay), 0125  
Azerbaijani (az), 0126  
Bashkir (ba), 0201  
Belarusian (be), 0205  
Bulgarian (bg), 0207  
Bihari (bh), 0208  
Bislama (bi), 0209  
Bambara (bm), 0213  
Bengali (bn), 0214  
Tibetan (bo), 0215  
Breton (br), 0218  
Signal-to-noise ratio ............... 72 dB (IEC-A network)  
Bass  
AM tuner  
Frequency ................ 100 Hz  
Gain ............................ 12 dB  
Mid  
Frequency ................ 1 kHz  
Gain ............................ 12 dB  
Treble  
Frequency range ...................... 531 kHz to 1 602 kHz (9 kHz)  
530 kHz to 1 640 kHz  
Sichuan Yi (ii), 0909  
Inupiaq (ik), 0911  
Ido (io), 0915  
Icelandic (is), 0919  
Inuktitut (iu), 0921  
Javanese (jv), 1022  
Georgian (ka), 1101  
Kongo (kg), 1107  
Twi (tw), 2023  
(10 kHz)  
Navajo, Navaho (nv), 1422 Tahitian (ty), 2025  
Usable sensitivity ..................... 25 µV (S/N: 20 dB)  
Signal-to-noise ratio ............... 62 dB (IEC-A network)  
Chichewa (ny), 1425  
Occitan (oc), 1503  
Ojibwa (oj), 1510  
Oromo (om), 1513  
Oriya (or), 1518  
Ossetian (os), 1519  
Panjabi, Punjabi (pa),  
1601  
Uighur, Uyghur (ug), 2107  
Ukrainian (uk), 2111  
Urdu (ur), 2118  
Uzbek (uz), 2126  
Venda (ve), 2205  
Vietnamese (vi), 2209  
Bosnian (bs), 0219  
Catalan (ca), 0301  
Chechen (ce), 0305  
Chamorro (ch), 0308  
Frequency ................ 10 kHz  
Gain ............................ 12 dB  
Note  
Specifications and the design are subject to mod-  
ifications without notice.  
DVD Player  
System .......................................... DVD video, Video CD, CD,  
WMA, MP3, AAC, DivX,  
Corsican (co), 0315  
Kikuyu, Gikuyu (ki), 1109  
Volapük (vo), 2215  
Cree (cr), 0318  
Czech (cs), 0319  
Church Slavic (cu), 0321  
Chuvash (cv), 0322  
Welsh (cy), 0325  
Kuanyama (kj), 1110  
Kazakh (kk), 1111  
Kalaallisut (kl), 1112  
Central Khmer (km), 1113  
Kannada (kn), 1114  
Pali (pi), 1609  
Walloon (wa), 2301  
Wolof (wo), 2315  
Xhosa (xh), 2408  
Yiddish (yi), 2509  
Yoruba (yo), 2515  
Zhuang, Chuang (za),  
2601  
JPEG system  
Region number ........................ 5  
Usable discs .............................. DVD video, Video CD, CD,  
CD-R/RW, DVD-R/RW/R DL  
Frequency response ............... 5 Hz to 44 000 Hz (with DVD,  
at sampling frequency  
Polish (pl), 1612  
Pashto, Pushto (ps), 1619  
Quechua (qu), 1721  
Romansh (rm), 1813  
Danish (da), 0401  
Kanuri (kr), 1118  
Rundi (rn), 1814  
96 kHz)  
Divehi (dv), 0422  
Kashmiri (ks), 1119  
Romanian (ro), 1815  
Zulu (zu), 2621  
Signal-to-noise ratio ............... 96 dB (1 kHz) (IEC-A net-  
work) (RCA level)  
Number of channels .............. 2 (stereo)  
MP3 decoding format ........... MPEG-1 & 2 Audio Layer 3  
66  
67  
En  
En  
PIONEER CORPORATION  
1-1, Shin-ogura, Saiwai-ku, Kawasaki-shi,  
Kanagawa 212-0031, JAPAN  
PIONEER ELECTRONICS (USA) INC.  
P.O. Box 1540, Long Beach, California 90801-1540, U.S.A.  
TEL: (800) 421-1404  
PIONEER EUROPE NV  
Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium/Belgique  
TEL: (0) 3/570.05.11  
PIONEER ELECTRONICS ASIACENTRE PTE. LTD.  
253 Alexandra Road, #04-01, Singapore 159936  
TEL: 65-6472-7555  
PIONEER ELECTRONICS AUSTRALIA PTY. LTD.  
5 Arco Lane, Heatherton, Victoria, 3202 Australia  
TEL: (03) 9586-6300  
PIONEER ELECTRONICS OF CANADA, INC.  
300 Allstate Parkway, Markham, Ontario L3R 0P2, Canada  
TEL: 1-877-283-5901  
TEL: 905-479-4411  
PIONEER ELECTRONICS DE MEXICO, S.A. de C.V.  
Blvd.Manuel Avila Camacho 138 10 piso  
Col.Lomas de Chapultepec, Mexico, D.F. 11000  
TEL: 55-9178-4270  
 
台北4078  
(02) 2657-3588  
司  
 
9901-6  
Published by Pioneer Corporation.  
Copyright ã 2010 by Pioneer Corporation.  
All rights reserved.  
(0852) 2848-6488  
Printed in Thailand  
<KKMZX> <10K00000>  
<QRB3172-A/N> ID  

Philips BDP2985 User Manual
Panasonic AJ HPX2700 User Manual
Motorola MOTOROKR S7 HD User Manual
Milwaukee 9560 User Manual
Miller Camera Support Projib 711 User Manual
Lowepro QC 5340 User Manual
Lanzar Car Audio HERITAGE HTG 434 User Manual
Konica Minolta MAXXUM 5D User Manual
Kenwood TS 570S TS 570D User Manual
JVC Model KD S580J User Manual