Philips SHB1400 User Manual

Register your product and get support at  
Bluetooth Headset  
SHB1400  
EN User manual  
1 Welcome  
With the Philips Bluetooth headset SHB1400, you can enjoy  
convenient wireless handsfree call. Soft, ergonomically designed ear  
bud provides all-day wearing comfort and you can simply re-charge  
your headset on your computer or with a USB charger.  
Spend a few minutes to learn more about your headset to enjoy your  
Philips Bluetooth headset to its fullest.  
4
EN  
 
About operating and storage temperatures  
• Do not operate or store in a place where temperature is below  
-15ºC (5ºF) or above 55ºC (131ºF) as this may shorten your  
battery life.  
2 Important  
Hearing Safety  
The integrated battery shall not be exposed to excessive heat such  
as sunshine, fire or the like.  
Disposal of your old product  
Your product is designed and manufactured with high quality  
materials and components, which can be recycled and reused.  
Danger  
To avoid hearing damage, limit the time you use the headphones at high volume and set  
the volume to a safe level.The louder the volume, the shorter is the safe listening time.  
Be sure to observe the following guidelines when using your  
headphones.  
When this crossed-out wheeled bin symbol is attached to a product  
it means that the product is covered by the European Directive  
2002/96/EC.  
Listen at reasonable volumes for reasonable periods of time.  
Be careful not to adjust the volume continuously upwards as  
your hearing adapts.  
Please inform yourself about the local separate collection system for  
electrical and electronic products.  
Please act according to your local rules and do not dispose of your  
old products with your normal household waste. Correct disposal of  
your old product helps to prevent potential negative consequences  
for the environment and human health.  
Do not turn up the volume so high that you can’t hear what’s  
around you.  
You should use caution or temporarily discontinue use in  
potentially hazardous situations.  
Excessive sound pressure from earphones and headphones  
can cause hearing loss.  
You should use caution or temporarily discontinue use in  
potentially hazardous situations.  
Battery disposal  
For your safety, avoid distractions from phone calls while in  
traffic or other potentially dangerous environments.  
Your product contains batteries covered by the European Directive  
2006/66/EC, which cannot be disposed with normal household  
waste.  
Please inform yourself about the local rules on separate collection  
of batteries because correct disposal helps to prevent negative  
consequences for the environmental and human health.  
Electric-, Magnetic- and Electromagnetic  
Fields (EMF)  
1. Royal Philips Electronics manufactures and sells many products  
targeted at consumers, which, like any electronic apparatus, in  
general have the ability to emit and receive electromagnetic signals.  
2. One of Philips’ leading Business Principles is to take all necessary  
health and safety measures for our products, to comply with all  
applicable legal requirements and to stay well within the EMF  
standards applicable at the time of producing products.  
3. Philips is committed to develop, produce and market products that  
cause no adverse health effects.  
Notice for the European Union  
Hereby, Philips Consumer Lifestyle, BU P&A, declares that this Philips  
Bluetooth headset SHB1400 is in compliance with the essential  
requirements and other relevant provisions of Directive 1999/5/EC.  
This product has been designed, tested and manufactured according  
to the European R&TTE Directive 1999/5/EC.  
4. Philips confirms that if its products are handled properly for their  
intended use, they are safe to use according to scientific evidence  
available today.  
5. Philips plays an active role in the development of international  
EMF and safety standards, enabling Philips to anticipate further  
developments in standardization for early integration in its products.  
Trademarks  
Trademarks are the property of Koninklijke Philips Electronics N.V.  
or their respective owners.The Bluetooth word mark and logos  
are owned by the Bluetooth SIG, Inc. and any use of such marks by  
Koninklijke Philips Electronics N.V. is under license.  
General information  
To avoid damage or malfunction:  
• Do not expose the headset to excessive heat.  
• Do not drop your headset.  
• Apparatus shall not be exposed to dripping or splashing.  
• Do not allow your headset to be submerged in water.  
• Do not use any cleaning agents containing alcohol, ammonia,  
benzene, or abrasives.  
• If cleaning is required use a soft cloth, if necessary dampened with  
a minimum amount of water or diluted mild soap, to clean the  
product.  
EN  
5
 
3 What’s in the box  
Philips Bluetooth headset SHB1400  
Earhook  
Quick Start Guide  
Compatibility  
Your headset is compatible with Bluetooth enabled mobile phones. It  
features Bluetooth verson 2.1+EDR but will also work with devices  
featuring other Bluetooth versions that support the Headset (HSP)  
or Handsfree (HFP) Bluetooth profile.  
6
EN  
 
4 Overview of the headset  
c
b
d
e
f
a
a Ear cap  
b VOL -/VOL +: Volume button  
c LED  
d
: Function button  
e Mic  
f USB cap  
EN  
7
 
Pair the headset with your mobile phone  
5 Get started  
Before you use the headset with a mobile phone for the first time,  
pair it with the mobile phone.A successful pairing establishes a  
unique encrypted link between the headset and the mobile phone.  
The headset stores the last eight links in the memory. If you try to  
pair more than eight devices, the link for the earliest paired device is  
overwritten.  
Charge the headset  
Note  
Finish your call before charging the headset, as connecting the headset for  
charging will power off the unit.  
During charging, you can operate the headset normally.  
1 Ensure that the headset is charged and turned off.  
2 Ensure that the mobile phone is turned on and its Bluetooth  
feature is activated.  
1 Remove the USB cap.  
3 Press until the LED starts flashing red and blue alternately.  
Do not stop pressing the button after seeing the blue LED  
only.  
» The headset is in pairing mode, which lasts five minutes.  
4 Pair the headset with the mobile phone. For details, refer to  
the user manual of the mobile phone.  
A sample pairing is shown below.  
1 Under Bluetooth menu on the mobile phone, search for the  
headset.  
2 From the found devices, select Philips SHB1400.  
Enter “0000” (4 zeros), if prompted to enter the pin  
code of the headset. On mobile phones using Bluetooth  
2.1+EDR or higher, you may not need to enter a pass  
code.  
2 Plug the headset into a powered USB port on a PC or into a  
Settings  
Bluetooth  
Connectivity  
Settings  
Devices Found  
Settings  
Connectivity  
power adaptor with USB outlet.  
Enter Password  
Add  
Philips SHB1400  
Bluetooth  
device  
Select  
Select  
Select  
Back  
Back  
Back  
» When the pairing is successful, a long beep occurs and the  
LED on the headset starts to flash blue every 3 seconds.  
» During charging, the LED turns red.The LED turns off when  
the headset is fully charged.  
Tip  
Typically, a full charge takes 2 hours.  
8
EN  
 
6 Fit your headset  
1 Place the earbud in your ear and rotate the headset upwards  
or downwards until it fits your ear securely.  
Optional (with an earhook)  
For an extra-secure fit, you can attach the earhook: Push the ball joint  
between the earbud and the main body of the headset.  
EN  
9
 
Manage 3-way calls  
7 Use the headset  
If your mobile phone and network operator support 3-way-calls, you  
can manage 3-way-calls via the headset.  
Connect the headset to a mobile phone  
To hold the active call and  
Press while the 2nd call is  
1 With the mobile phone turned on, press until the LED lights  
accept a waiting call  
coming in.  
up, to turn on the headset.  
To drop the active call and  
Hold while the 2nd call is  
» Once turned on, the headset reconnects automatically to  
the last device it was connected to.  
accept a waiting call  
coming in.  
» If the last connected device is not available, the headset  
tries to reconnect to the second to last device that was  
connected to the headset. If it cannot find this device, it  
will look for all previously paired devices in the order of  
last usage, until it finds a device to connect to.The headset  
stores up to 8 previously paired devices.  
To swap the active call and the  
Press during a call.  
call on hold  
To drop the active call and  
Hold until a beep sound  
accept the call on hold  
occurs.  
To drop the call on hold  
Press and VOL - until a beep  
sound occurs.  
If you turn on the mobile phone or its Bluetooth feature after turning  
on the headset, connect the headset from your mobile phone’s  
Bluetooth menu.  
To add the call on hold to an  
active call  
Press and VOL + until a beep  
sound occurs.  
Automatic power saving  
LED and sound indication  
If the headset cannot find any Bluetooth device to connect to in  
range within five minutes, it automatically powers down to save  
battery life.  
The red/blue LED flashes alternately. The headset is ready for  
pairing.  
The blue LED flashes once every 3  
seconds.  
The headset is connected  
to the phone.  
Control your calls  
The red LED flashes twice every 3  
seconds.  
The headset is not  
connected.  
Turn the headset on/off  
Press until the LED turns on/off.  
The blue LED flashes once every half There is an incoming/  
Check battery  
Hold VOL + and VOL - simultaneously.  
> 50%: 1 blue flash  
< 50%: 2 red flashes  
a second.  
outgoing call.  
The blue LED flashes once every  
second.  
The headset is active on  
a call.  
< 25%: 3 red flashes  
The red LED flashes three times and The battery is low in  
beeps twice every minute.  
Pick up/end a call  
power.  
Press .  
Solid red LED  
The headset is charging.  
Adjust Volume  
Press VOL +/VOL -.  
The LED is off.  
The headset is off./Charging  
is finished.  
Redial the last number  
Press twice quickly.  
Hold .  
Reject a call  
The headset beeps every 5 seconds The Mic is muted.  
Activate voice dialing  
Hold until beep occurs.  
Hold during a call.  
Transfer a call to a  
mobile phone  
Mute the Mic  
Press twice quickly during a call.  
10 EN  
 
8 Product information  
Direct USB charging  
Talk time: Up to 7 hours  
Standby time: Up to 150 hours  
Typical time for a full charge: 2 hours  
Rechargeable Lithium-Polymer battery (78 mAh)  
Bluetooth 2.1+EDR, HSP – Headset Profile 1.1, HFP Hands-  
Free Profile 1.5  
Operating range: Up to 10 meters (33 feet)  
Auto power off  
Battery status check  
Supports Voice Dial, Redial, 3-way call support, Mic Mute  
Specifications are subject to change without notice.  
EN 11  
 
9 Frequently asked  
questions  
Bluetooth headset does not switch on.  
Battery is low.  
Charge the headset.  
No connection to a mobile phone.  
Bluetooth disabled.  
Enable the Bluetooth feature on your mobile phone and turn  
on the mobile phone before you turn on the headset.  
Pairing does not work.  
The headset is not in pairing mode.  
Follow the steps described in this user manual.  
Ensure that you see the LED light flashes red and blue  
alternately before you release the button. Do not stop  
pressing the button after seeing the blue LED only.  
The mobile phone cannot find the headset.  
The headset may be connected to another previously paired  
device.  
Turn the currently connected device off or move it out of  
range.  
Pairings may have been reset or headset has been previously paired  
with other device.  
Pair the headset with the mobile phone again as described in  
the user manual.  
Voice dialing or redialing does not work.  
Your mobile phone may not support this feature.  
The other side cannot hear me, and I hear  
a beep noise every couple of seconds.  
The microphone is muted.  
Quickly press twice to enable the microphone.  
Audio quality is poor and crackling noises  
can be heard.  
Bluetooth audio source is out of range.  
Reduce the distance between the headset and the Bluetooth  
audio source, or remove obstacles between them. It can help  
to wear the mobile phone on the same side as your headset, if  
you are wearing it in your pockets  
The earbud is not positioned correctly.  
Ensure that you position the earbud as described in this user  
manual, with the sound tube pointing slightly upward. Then,  
rotate the headset in your ear while slightly pressing against it,  
until it fits securely.  
Try the earhook for added stability.  
12 EN  
 
© 2009 Koninklijke Philips Electronics N.V.  
All rights reserved.  
SHB1400_UM_00_V1.0  

Redring 650 User Manual
QSC Audio Car Speaker KW122 User Manual
PYLE Audio Car Video System PLTS73FX User Manual
Pelco Camera Lens 13FF8D 4PAK User Manual
Nikon Coolpix 5400 User Manual
Motorola DSR500 User Manual
Modulaire 120 1469 User Manual
Lochinvar COPPER FIN CB 0645 User Manual
Legacy Car Audio LA 220 User Manual
Kenwood Car Stereo System KDC 4054UB User Manual