Philips JENHR1D User Manual

JENHR1D  
7” LCD MONITOR  
WITH BUILT-IN DVD PLAYER FOR  
REAR SEAT ENTERTAINMENT  
PUSH  
OPERATION MANUAL/ INSTALLATION GUIDE  
®
128-9095A  
FEATURES  
• 7Digital Thin Film Transistor (TFT) Active Matrix Liquid Crystal Display (LCD)  
Monitor  
• Built-in DVD Player  
• Last position memory for DVD player  
• Three Audio / Video Source inputs (DVD, AV and AUX)• USB 2.0 port / SD Card  
Reader input  
• Screen mode selection (4:3, 16:9)• On Screen Display (OSD) for control of picture  
quality and functions  
• Full function remote control  
• Plays DVD, CD and MP3 discs  
• IR headphone (optional)  
SPECIFICATIONS  
Type  
TFT Active Matrix LCD  
480x234  
Resolution  
Pixels  
336,960  
Operation Temperature  
Storage Temperature  
Backlit life  
32 ~113º F (0 ~ 45º C)  
-4 ~ 149º F (-20 ~ 65º C)  
20,000 Hours  
Video Display System  
Headphone Audio Output  
Video Output  
NTSC/PAL/AUTO  
0.03W @ 32 ohms  
1.0Vp-p @ 75 ohms  
12 VDC  
Power Source  
Dimension (L x W x H)  
147mm x 275mm x 200mm  
5.7in x 10.8in x 7.8in  
Specifications subject to change without notice.  
3
MATERIAL TO USE IN THIS PACKAGE:  
1) JENHR1D System Monitor with DVD Player (JENHR1D) (1pc)  
NOTE: The JENHR1D monitor has been designed to be  
interchangeable from one headrest to the other. The  
headrests will still have the Cigarette Lighter Adaptor  
cables and 3 RCA Jack (AV Input) on them and should  
be connected to their respective connectors. The  
headrest cover from the manufacturer is covered with  
shale colored vinyl.  
PUSH  
NOTE: Headrest cables are included with the headrest DVD player and the headrest  
monitor.  
1) Remote Control  
P/N 136-5150) - (1pc)  
2) AV Adapter Cable  
P/N 112B3227 - (1pc)  
POWE  
R
SOURCE  
DVD SOURC  
E
MUTE  
VOLUME  
+
-
PI  
X
ENTE  
R
PREV  
NEXT  
PAUS  
E
FR  
PLAY  
FF  
STO  
P
SETU  
P
REPEAT  
SUBTITLE  
DISC MENU  
AUDI  
O
ZOOM  
SYST EM MENU  
DIS PLAY  
1
5
9
2
6
0
3
4
7
8
FMM ON/O FF  
CHAN NEL SELE CT  
3) Black Vinyl Headrest Cover  
(P/N 126-1377)-(1pc)  
4) Pewter Vinyl Headrest Cover  
(P/N 126-1378)-(1pc)  
5) Support Tube Adaptor Box  
(P/N 170-0161)-(1box)  
4
HEADREST COVER REPLACEMENT:  
NOTE: Choose the best color match for your vehicle.  
1. Lay the headrest on a flat surface, screen facing up. Using a Philips screwdriver,  
unscrew the two Philips screws and lift the bottom edge of the monitor up-  
ward.  
Figure A  
Unscrew Philips Screws  
2. Carefully tilt the bottom edge of the DVD player upward and pull towards you  
to detach it from the top of the headrest.  
3. Carefully unplug the wire from the back of the DVD player and set aside in a  
safe place.  
4. Detach the velcro tabs securing the headrest cover and slip the cover off.  
Detach Velcro Tabs  
Figure B  
5. Replace the headrest cover with the desired color and secure the headrest  
cover by re-attaching the velcro tabs. Slide the posts through the rectangular  
cutouts first.  
6. Carefully plug the harness back into the back of the DVD player.  
Figure C  
RED WIRE  
5
7. Replace the player into the headrest.  
a. Slide the top of the DVD player into the top of the headrest.  
b. When lowering the bottom of the DVD player make sure the cable is not  
trapped between the DVD player and the headrest inside the shell.  
c. Press down on the DVD player to align the Philips head screws with the  
holes in the headrest.  
d. Secure the DVD player with two screws. Do not over tighten the screws.  
8. Tighten screws.  
Push  
Figure D  
Figure E  
Tighten Philips Screws  
6
VEHICLE PREPARATION  
1. Read the manual and get familiar with the product requirements and  
connections.  
2. Install the headrests.  
a. Remove vehicle’s original headrests and store in a safe place.  
b. Locate the box of tube adapters and find the tubes that match the  
diameter of your factory headrest post. There are six different sizes:  
12mm, 12.5mm, 12.7mm, 13.8mm, 14mm, and 16mm  
The chart lists standard post sizes for different vehicle makes. Insert  
appropriate support tube adaptors in vehicle post guides. (if needed).  
Vehicle  
Ford/Lincoln  
Factory Post  
Option Sizes  
10 mm, 12 mm and 12.7 mm  
12.7mm  
Nissan/Infiniti  
Toyota/Lexus  
Honda/Acura  
Chrysler/Dodge  
GM/Chevrolet  
12 mm and 13.88 mm  
10 mm and 12.7 mm  
10 mm, 12 mm, and 12.7 mm  
10 mm, 11 mm, 12 mm and 14 mm  
Locate an accessory power source (+12VDC present when the ignition key is in the  
accessory and run positions. 0VDC should be present when the ignition key is in the  
OFF position). (Refer to the Wiring Diagrams on page 9. Be sure, that all the wiring  
is protected from sharp edges and is routed in such a manner that it will not be  
pinched, when it is fully installed.  
3. Plug the power adapter into the accessory socket.  
7
Wireless Headphones  
The JENHR1D is equipped with a dual channel IR (Infrared) transmitter for use with  
wireless IR headphones (not supplied with the JENHR1D) which are available at  
many electronics stores.  
If two JENHR1D’s are installed in a vehicle the first JENHR1D has to be set to  
transmit on channel A (1) and the second JENHR1D has to be set to transmit on  
channel B (2). See page 17 for details on setting the IR transmitter channel.  
If wireless headphones are not used standard wired headphones or ear buds can be  
used.  
NOTE: A single channel headphone is required when only one JENHR1D is installed. If  
2 JENHR1Ds are installed a 2 channel headphone is required for the second headrest.  
Wireless FM Modulator  
The JENHR1D is equipped with a built-in wireless FM Modulator, that allows you  
to listen to the DVD audio signal by tuning your vehicle’s radio to the selected  
frequency, (CH1 87.7MHz, ( 88.1MHz, 88.5MHz, 88.9MHz, CH5 106.7.1MHz, CH6  
107.1MHz, CH7 107.5MHz, CH8 107.9MHz. This feature is accessed by using the FM  
transmitter buttons on the remote (FMM ON/OFF, and CHANNEL SELECT).  
Whenever the FM Modulator is on, broadcast reception on the vehicles radio will be  
poor. Switching the FM Modulator off will allow normal radio reception.  
NOTE 1: In certain areas where there are a large number of FM radio stations (e.g.  
large cities, urban areas), the reception of the FM signal may not be satisfactory,  
resulting in static, distorted sound or signal bleed thru from strong local radio  
stations. This is not a defect in the product, but the result of a stronger local radio  
station overpowering the wireless FM transmitter in your headrest monitor.  
NOTE 2: If two JENHR1D’s are installed in the vehicle do not use both FM Modulators  
at the same time.  
8
JENHR1D WIRING DIAGRAM  
Headrest Monitor  
PUSH  
Cigarette Lighter Adaptor  
RCA Jack (AV Input)  
1. Connect the cigarette lighter adaptor to the car.  
9
JENHR1D CONTROLS AND INDICATORS DIAGRAM  
(Front View)  
LCD PANEL  
PUSH  
POWER/SOURCE  
PLAY/PAUSE  
VOLUME /NEXT  
SYSTEM MENU  
VOLUME /PREVIOUS  
STOP  
SCREEN RELEASE  
IR SENSOR  
IR HEADPHONE  
TRANSMITTER LENS  
PULL DOWN  
HEADPHONE JACK  
USB PORT  
AUX IN JACK  
SD CARD READER  
COVER  
(BOTTOM VIEW)  
DVD DISC  
PUSH  
(FRONT VIEW MONITOR OPEN)  
10  
Playing DVDs  
Press the screen release button and raise the screen to insert a DVD disc. Snap  
the DVD disc onto the hub (spin the disc with your finger to make sure the disc is  
seated properly).  
Lower and close the LCD screen, disc playback will not start until the screen is  
closed for safety reasons. When the DVD menu appears press the play button.  
Playing USB  
The System will detect the insertion of the USB media automatically if no disc is  
loaded. The system only auto detects the first media inserted (DVD, SD Card or USB  
drive); the second media source, USB, SD Card or CD disc must be manually selected  
by pressing the DVD source button on the remote control.  
When a disc is inserted, the system will switch to DVD mode immediately regardless  
if USB media is currently playing. The DVD source (DVD or USB) can only be  
changed while the DVD is not playing. When a USB device is loaded in the player,  
the navigation menu appears automatically.  
1. Press the cursor button p or q to move the highlight to the desired folder and  
press ENTER to display the contents in the folder.  
2. Press the cursor button p or q to move the highlight to the desired file in the  
folder and press ENTER to begin playback of the highlighted file.  
Note: The System supports:  
Files: MP3 and JPEG files only.  
File systems: FAT16 and FAT32  
The system will NOT support:  
Files: BMP, M4P, WAV, ASF, H.264, DivX, WMA  
File systems: NTFS, ExFAT  
The system will always default to the DVD when the system detects a disc in the  
DVD player.  
Playing Audio CDs  
When playing an audio CD, the DISPLAY banner appears automatically. The track  
number and the elapsed time of the disc are displayed.  
Selecting a Track  
Selection of a specific track is accomplished by using the numbers keys. Press the  
number key corresponding to the desired track and press ENTER and the player will  
implement the selection.  
Using the REPEAT feature  
The default mode for the Repeat feature is OFF. Pressing REPEAT consecutively  
changes the repeat options  
• TRACK – repeat the track that is playing.  
• ALL – repeat the entire disc that is playing.  
• REPEAT OFF – repeat is turned off.  
11  
Playing MP3 Discs  
MP3 is a format for storing digital audio. An audio CD-quality song can be com-  
pressed into MP3 format with very little loss of quality, while taking up much less  
space. CD-R discs that have been encoded in MP3 format can be played on the DVD  
player. The DVD player plays the songs in the order they were burned on to the disc  
Selecting Folders and Songs  
When an MP3 disc is loaded in the player, the navigation menu will appear on the  
screen automatically.  
Press the cursor button, p or q, to move the highlight to the desired folder and  
press the ENTER button to display the songs in the folder.  
Press the cursor button, p or q, to move the highlight to the desired song and  
press the ENTER button to begin playback of the highlighted song.  
Selecting a Play Mode  
You can choose what order the songs will play on a disc temporarily. The default  
play mode is FOLDER. Press REPEAT consecutively to choose the desired play mode.  
The play mode options are :  
• Repeat One  
Repeat the song that is playing.  
• Repeat Folder Repeat the disc that is playing.  
• Repeat Off  
Turn off repeat function.  
Playing SD Card  
The System will detect the insertion of the SD Card automatically if no disc is load-  
ed. The system only auto detects the first media inserted (DVD or the second media  
source, USB device ,SD card or CD disc must be manually selected by pressing the  
DVD source button on the remote control.  
When a disc is inserted, the system will switch to DVD mode immediately regard-  
less if SD Card media is currently playing. The DVD source can only be changed  
while the DVD is not playing. When a SD Card is loaded in the player, the navigation  
menu appears automatically.  
1. Press the cursor button p or q to move the highlight to the desired folder and  
press ENTER to display the contents in the folder.  
2. 2. Press the cursor button p or q to move the highlight to the desired file in  
the folder and press ENTER to begin playback of the highlighted file.  
The system will always default to the DVD when the system detects a disc in the  
DVD player.  
12  
REMOTE CONTROL OPERATION  
NOTE: The remote control has a battery installed with a pull tab to prevent battery  
discharge. Remove the pull tab before attempting to use the remote.  
Battery Replacement  
1. Remove the battery holder.  
2. Remove the old battery and insert the new battery (CR2025) into the battery  
holder. Be sure to observe the correct polarity.  
3. Align the battery holder with the remote control and push until the holder  
clicks.  
Remote Control Function Description  
SOURCE  
POWER  
DVD SOURCE  
1
2
26  
25  
MUTE  
VOLUME  
3
4
+
PIX  
ENTER  
24  
23  
PREV  
NEXT  
PAUSE  
22  
21  
5
6
FR  
PLAY  
FF  
STOP  
20  
19  
7
SETUP  
REPEAT  
SUBTITLE  
AUDIO  
8
9
18  
17  
ZOOM  
SYSTEM MENU DISC MENU  
DISPLAY  
16  
15  
10  
11  
1
5
9
2
3
4
12  
6
7
8
FMM ON/OF  
F
CHANNEL SELECT  
14  
13  
0
13  
* Function control is available on the unit and the remote control.  
1. POWER ( ) Button*  
Press this button to turn the unit ON and OFF.  
2. SOURCE Button*  
Each time the button is pressed, the audio / video source will change in the  
following sequence: DVD > AV > AUX  
NOTE: The USB device and the SD card can be accessed using the DVD source  
button. Refer to Item 26.  
3. MUTE Button  
Press this button to mute all the audio. Pressing the button again restores the  
sound to the previously set level.  
4. CURSOR (pqt u)Buttons  
Use these buttons to navigate the menu selection on the screen.  
5. PREVIOUS ( ) Button*  
Press to return to the previous chapter or track.  
6. FR SCAN BACKWARD ( ) Button  
Press to search in the backward direction. Press repeatedly to change the  
search speed from 2, 4, 8, 16 and 32 times the normal speed. Pressing the fifth  
time returns to normal speed.  
7. PLAY ( u ) Button*  
Press to activate the play mode when a disc is loaded in the disc compartment,  
a USB memory device or a SD card is connected to the unit.  
8. SETUP Button  
Press the DVD button and SETUP button to display the Setup Menu which  
allows the user to change the DVD player options such as OSD Language,  
Video, Rating, etc. Refer to the settings and adjustment section for more  
information.  
9. REPEAT Button  
Allows the user to repeat a selected track, folder, title, chapter, or all  
14  
10. ZOOM Button  
Press this button to enlarge or decrease the picture size when playing a DVD  
disc.  
Press ZOOM button  
Once  
Twice  
3 Times  
4 Times  
5 Times  
6 Times  
7 Times  
DVD Player performs  
Enlarges the picture 2X  
Enlarges the picture 3X  
Enlarges the picture 4X  
Reduces the picture 1/2  
Reduces the picture 1/3  
Reduces the picture 1/4  
Picture is returned to original size  
11. SYSTEM MENU Button  
Press this button to enter the system menu which contains features and  
options to customize the screen display and change the OSD language.  
12. NUMBER Buttons  
Allows the user to enter numbers 0 to 9 for selection of CD tracks, DVD  
chapters,and passwords.  
13. FMM ON/OFF Button  
Turns the wireless FM Modulator on or off.  
14. FMM CHANNEL SELECT Button  
Selects the wireless FM Modulator Frequency: (CH1 87.7MHz, CH2 88.1MHz,  
CH3 88.5MHz, CH4 88.9MHz, CH5 106.7MHz, CH6 107.1MHz, CH7 107.5MHz,  
CH8 107.9MHz.  
15. DISC MENU Button  
Press this button to enter the DVD root menu.  
16. DISPLAY Button  
Press to display current disc information while the disc is playing. The  
information displayed will be Title Elapsed, Title Remaining, Chapter Elapsed  
and Chapter Remaining. Pressing the button will also turn the display off.  
17. SUBTITLE Button  
Press to display and select the available subtitle language in DVD mode. Each  
time he button the subtitle language changes.  
NOTE: The type and number of subtitle languages vary from disc to disc.  
15  
18. AUDIO Button  
Press to display and select the available AUDIO languages in DVD mode. Each  
time you press the button, the language changes.  
NOTE: The audio languages vary from disc to disc.  
19. FF SCAN FORWARD ( ) Button*  
Press to search in the forward direction. Press repeatedly to change the search  
speed from 2, 4, 8, 16 and 32 times the normal speed.  
20. STOP ( ) Button*  
Press to stop playback.  
21. NEXT ( ) Button*  
Press to skip to the next chapter or track.  
22. PAUSE ( II ) Button*  
Allows the user to pause the playback. Pressing pause again or pressing the  
Playbutton will resume normal playback.  
23. ENTER Button  
Used to implement a selected setting or menu option.  
24. PIX (Picture Select) Button  
Each time this button is pressed, the OSD picture adjustment displays the  
“Adjustment barfor BRIGHTNESS, CONTRAST, COLOR, TINT (For NTSC only).  
Once the desired adjustment bar is displayed, use the VOLUME+ and VOLUME–  
button to adjust the setting. The display will automatically turn off if no  
adjustments are made within 6 seconds from when the button was pressed.  
25. VOLUME DOWN (-) or UP (+)*  
Press to select the level of the picture adjustments when the unit is in picture  
adjustment mode or to increase or decrease the volume for the wired  
headphones.  
26. DVD Source*  
This button is only active when remote control is in the DVD mode. Each  
time the button is pressed one of the sources (DVD, USB and SD Card ) will be  
selected. If a USB device or SD Card is not plugged in, the unit will remain on  
DVD Source. Press to change source in sequence of DVD > USB > SD Card.  
NOTE: The DVD Source button is used to access MP3 and audio CDs when these  
discs are in the disc compartment.  
16  
SYSTEM MENU SETTINGS AND ADJUSTMENTS  
The System Menu contains features and options that allow you to customize your  
system.  
1. Press the “ button on unit or press the TV button and the SYSTEM MENU  
button on the remote control, the menu display below will appear on screen.  
2. Use the “+” “-buttons to change the setting .  
3. To select the next menu press the “ button or the SYSTEM MENU button on  
the remote control.  
MENU DISPLAY  
The first adjustment to appear is the volume adjustment for the wired headphones.  
The volume can be adjusted from 1 to 32.  
16  
The picture can be adjusted under the system menu. The picture adjustments  
consist of brightness (BRIGHT), CONTRAST, COLOR, TINT (for NTSC only). The  
adjustments range from 1 to 32.  
COLOR  
16  
BRIGHT  
16  
CONTRAST  
16  
TINT  
16  
The screen mode select feature allows the user to change the screen format (aspect  
ratio from 4:3 or to 16:9).  
SCREEN MODE  
16:9  
SCREEN MODE  
4:3  
The IRT can be set to Channel A or Channel B for use with optional wireless  
headphones. The IRT function can also be set to off.  
IRT  
A
IRT  
B
IRT  
OFF  
17  
The FM Modulator adjustments consist of turning the FM Modulator on or off and  
selecting the FM Modulator frequency. The wireless FM Modulator Frequencies that  
can be selected are:  
(CH1 87.7MHz, CH2 88.1MHz, CH3 88.5MHz, CH4 88.9MHz, CH5 106.7MHz, CH6  
107.1MHz, CH7 107.5MHz, CH8 107.9MHz.  
FMM  
OFF  
The OSD Language feature allows the user to select the language for the on-screen  
display. The user can either select English, Dutch, French, Spanish, Russian or  
Chinese for the OSD language.  
OSD LANGUAGE  
ENGLISH  
The RESET function allows all setting options to be reset to factory settings.  
RESET  
DVD SETTINGS AND ADJUSTMENTS  
The Setup Menu contains features and options that let you customize your DVD  
player. For example, you can set a language for the on-screen display or prevent  
DVD playback for children.  
Using the Setup Menu  
1. Press the DVD and SETUP buttons on the remote. The DVD Setup Menu  
appears on the screen. There are four menu pages which comprise the Setup  
Menu.  
2. To select and set an option, use the cursor buttons (t or u) to move the  
highlight to the desired page.  
3. After entering the highlighted page, use the cursor buttons (p or q) to  
highlight the desired option.  
4. Press u to open the sub menu that contains the different options available.  
Press p or q to highlight the desired option, and press ENTER to confirm the  
selection.  
5. Repeat steps 3 and 4 to set all the options that reside on the menu page.  
6. To change to another menu page, use the cursor buttons (t or u) then, repeat  
steps 2 through 4.  
18  
GENERAL PAGE  
General  
Audio  
Preference  
Exit  
General Setup Page  
TV Display  
Screen Saver  
Wide  
On  
On  
Last Memory  
Goto General Setup Page  
GENERAL SETUP PAGE  
TV Display  
The TV Display feature allows the user to change the screen format (aspect ratio to  
4:3 PScan, 4:3 LB, or 16:9 Wide)  
• To select the screen aspect ratio mode use the cursor button (p or q) to  
highlight TV DISPLAY. Press the cursor button u to open the sub menu that  
contains the different options available. Press the cursor button (p or q) to  
highlight the desired option, and press ENTER to confirm the selection. Use the  
cursor button t to return to the options.  
Screen Saver  
When set to ON and the DVD is not playing a screen saver will appear a short period  
of time.  
Last Memory  
The last memory function allows DVD playback to begin from the point when  
playback was last stopped or when the unit was shut off. The last memory feature  
allows the user to turn the last memory feature function on or off.  
19  
AUDIO PAGE  
General  
Audio  
Preference  
Exit  
Audio Setup Page  
Equalizer  
Sound Mode  
Bass Boost  
None  
Off  
Super Bass  
Treble Boost  
Off  
Off  
Goto Audio Setup Page  
AUDIO SETUP PAGE  
Sound Mode  
The sound mode feature allows the user to apply preset sound effects to the unit’s  
audio output signal. The user may choose from: None ,Rock, Pop, Live, Dance, Techno,  
Classic and Soft.  
• To select the sound mode use the cursor button (p or q) to highlight SOUND  
MODE. Press the cursor button u to open the sub menu that contains the different  
options available. Press the cursor button (p or q) to highlight the desired option,  
and press ENTER to confirm the selection. Use the cursor button t to return to the  
options.  
Bass Boost  
The bass boost feature increases the audio bass response and allows the function to  
be turned on or off.  
• To select the bass boost feature use the cursor button (p or q) to highlight BASS  
BOOST. Press the cursor button u to open the sub menu that contains the different  
options available. Press the cursor button (p or q) to highlight the desired option,  
and press ENTER to confirm the selection. Use the cursor button t to return to the  
options.  
Super Bass  
The super bass feature increases the audio bass response and allows the function to  
be turned on or off.  
• To select the super bass boost feature use the cursor button (p or q) to highlight  
SUPER BASS. Press the cursor button u to open the sub menu that contains the  
different options available. Press the cursor button (p or q) to highlight the  
desired option, and press ENTER to confirm the selection. Use the cursor button t  
to return to the options.  
Treble Boost  
The treble boost feature increases the audio treble response and allows the function  
to be turned on or off.  
• To select the treble boost feature use the cursor button (p or q) to highlight  
TREBLE BOOST. Press the cursor button u to open the sub menu that contains the  
different options available. Press the cursor button (p or q) highlight the desired  
option, and press ENTER to confirm the selection. Use the cursor button t to  
return to the options.  
20  
PREFERENCE PAGE  
General  
Audio  
Preference  
Exit  
Preference Page  
TV Type  
Audio  
NTSC  
Eng  
Subtitle  
Disc Menu  
Parental  
Password  
Default  
Eng  
Eng  
Goto Preference Page  
PREFERENCE PAGE  
NOTE: This menu page is available if there is no disc in the disc tray, the disc tray is  
open or the disc in the disc tray is stopped.  
There are seven items in the PREFERENCE PAGE. They are TV TYPE, AUDIO, SUBTITLE,  
DISC MENU, PARENTAL, PASSWORD, and DEFAULT.  
TV Type  
This function matches video output of the unit to the broadcast system of a  
connected TV. The unit supports both National Television System Committee (NTSC)  
and Phase Alternating Line (PAL) television broadcasting standards.  
Options:  
PAL: Select this mode if the connected TV is a PAL system. The video signal of a NTSC  
disc will be output in PAL format.  
AUTO: Select this mode if the connected TV is multi-system. The output format of  
video signal will be in accordance with the video signal of the disc.  
NTSC: Select this mode if the connected TV is a NTSC system. The video signal of a  
PAL disc will be output in NTSC format.  
• To select the TV type use the cursor button (p or q) to highlight TV TYPE. Press  
the cursor button u to open the sub menu that contains the different options  
available. Press the cursor button (p or q) to highlight the desired option, and  
press ENTER to confirm the selection. Use the cursor button t to return to the  
options..  
21  
Audio Menu  
This item allows a user to select a preferred audio language. This function only applies  
to discs encoded with different audio languages.  
Options: English, French, Spanish, Chinese, Japanese, Korean, Russian, and Thai.  
NOTE: If the selected language is not available for the currently playing disc, the  
disc’s default setting is applied.  
• To select the audio feature use the cursor button (p or q) to highlight AUDIO.  
Press the cursor button u to open the sub menu that contains the different  
options available. Press the cursor button (p or q) to highlight the desired  
option, and press ENTER to confirm the selection. Use the cursor button t to  
return to the options.  
Subtitle  
This item allows a user to select a preferred subtitle language. This function only  
applies to discs encoded with subtitles.  
Options: English, French, Spanish, Chinese, Japanese, Korean, Russian, and Thai.  
NOTE: If the selected language is not available for the currently playing disc, the  
disc’s default setting is applied.  
• To select the subtitle feature use the cursor button (p or q) to highlight  
SUBTITLE. Press the cursor button u to open the sub menu that contains the  
different options available. Press the cursor button (p or q) to highlight the  
desired option, and press ENTER to confirm the selection. Use the cursor button  
t to return to the options.  
Disc Menu  
This item allows a user to select a preferred disc menu language.  
Options: English, French, Spanish, Chinese, Japanese, Korean, Russian, and Thai.  
NOTE: If the selected language is not available for the currently playing disc, the disc’s  
default setting is applied.  
• To select the disc menu feature use the cursor button (p or q) to highlight  
DISC MENU. Press the cursor button u to open the sub menu that contains the  
different options available. Press the cursor button (p or q) to highlight the  
desired option, and press ENTER to confirm the selection. Use the cursor button  
t to return to the options.  
22  
Parental  
This item allows the user to limit the content of movie playback from G to Adult.  
The lower the value, the more strict the control. Movies rated higher than the level  
set for the parental lock can not be viewed without entering the correct password.  
Options:  
1) G, 2) PG, 3) PG – 13, 4) R, 5) NC17 6) Adult  
NOTE: The rating level can be changed only when the correct password is provided.  
This function only works with those discs with parental function.  
• To select the parental feature use the cursor button (p or q) to highlight  
PARENTAL. Press the cursor button u to open the sub menu that contains the  
different options available. Press the cursor button (p or q) to highlight the  
desired option, and press ENTER to confirm the selection. Use the cursor button  
t to return to the options  
Password  
This item allows a user to change the password. The default password is 3308.  
• To select the password feature use the cursor button (p or q) to highlight  
PASSWORD. Press the cursor button u to open the sub menu that contains the  
different options available. Press the cursor button (p or q) to highlight the  
desired option, and press ENTER to confirm the selection. Use the cursor button  
t to return to the options.  
• To change the password:  
1.Enter the old password in the OLD PASSWORD row.  
2.Enter the new password in the NEW PASSWORD row.  
3.Enter the new password again in the CONFIRM PWD row.  
NOTE: You may reset the password if you forget the old password by using the default  
password: 3308. This password is always active even after you have selected your  
own password and changed it. To avoid the possibility of others using the default  
password to set the parental level and change the password, record this default  
password in another area and delete it from this manual.  
Default  
This item allows a user to restore all the default settings except the settings in the  
Password Setup Page and the PARENTAL item.  
• To select the default feature use the cursor button (p or q) to highlight  
DEFAULT. Press the cursor button u to open the sub menu that contains the  
different options available. Press the cursor button (p or q) to highlight the  
desired option, and press ENTER to confirm the selection. Use the cursor button  
t to return to the options.  
23  
EXIT SETUP PAGE  
Exit  
General  
Audio  
Preference  
Video Setup Page  
Exit Setup Menu  
Exit Setup Page  
The exit setup page allows the user to exit the setup menu and return to the DVD  
playback.  
1. To exit the setup page use the u to highlight EXIT and press ENTER to confirm  
the selection.  
DVD Basics  
To get the optimum use out of the DVD Player, please read the following:.  
DVD Region Code  
The DVD player is preset to a region code at the factory depending on where the  
DVD player is sold. A DVD from a different region cannot be played in this unit and  
the unit will display “WRONG REGION.  
Region 1- USA, Canada  
Region 2- Japan, Europe, South Africa, Middle East, Greenland  
Region 3- S. Korea, Taiwan, Hong Kong, Parts of South East Asia  
Region 4- Australia, New Zealand, Latin America (including Mexico)  
Region 5- Eastern Europe, Russia, India, Africa  
Region 6- China  
24  
TROUBLESHOOTING  
PROBLEM  
SOLUTION  
IR remote inoperative  
• Verify that the battery in the remote is fresh.  
• Verify that the remote sensor eye is not  
obstructed.  
Disc won’t play  
• Insert a disc with the label side facing out.  
• Check the type of disc you put into disc  
tray. This DVD only plays DVD, audio CD and  
MP3s.  
• Both the unit and the disc are coded by  
region. If the regional codes don’t match, the  
disc can’t be played.  
Play starts, but then stops  
immediately  
• The disc is dirty. Clean it.  
• Condensation has formed. Allow player to  
dry out  
No sound or distorted  
sound  
• Make sure your DVD is connected properly.  
Make sure all cables are securely inserted  
into the appropriate jacks.  
• If you are using the 2-channel IR  
headphones, make sure you turn on the IR  
headphone power, make sure the correct  
channel (A or B) is selected.  
• If the FM Modulator is ON make sure proper  
frequency has been selected.  
Cannot advance through a  
movie  
• Most discs prohibit advancing through the  
opening credits and warning information  
that appear at the beginning of movies  
• The feature or action cannot be completed at  
this time because:  
1. The disc’s software restricts it.  
The icon ( ) appears on  
screen  
2. The disc’s software doesn’t support the  
feature (e.g., angles)  
3. The feature is not available at the moment.  
4. A title or chapter number that is out of  
range has been requested.  
Picture is distorted  
• The disc might be damaged. Try another disc.  
• It is normal for some distortion to appear  
during forward or reverse scan.  
25  
®
12 MONTH LIMITED WARRANTY  
Applies To Jensen Mobile Video Products  
AUDIOVOX ELECTRONICS CORP. (the Company) warrants to the original retail  
purchaser of this product that should this product or any part thereof, under  
normal use and conditions, be proven defective in material or workmanship within  
12 months from the date of original purchase, such defect(s) will be repaired or  
replaced with reconditioned product (at the Company’s option) without charge  
for parts and repair labor. A game controller, if supplied, is similarly warranted for  
ninety (90) days.  
To obtain repair or replacement within the terms of this Warranty, the product is to  
be delivered with proof of warranty coverage (e.g. dated bill of sale), specification  
of defect(s), transportation prepaid, to the Company at the address shown below.  
This Warranty does not extend to the elimination of externally generated static or  
noise, to correction of antenna problems, to costs incurred for installation, removal  
or reinstallation of the product, or to damage to digital memory/media devices,  
gaming devices, discs, speakers, accessories or vehicle electrical systems.  
This Warranty does not apply to any product or part thereof which, in the opinion  
of the Company, has suffered or been damaged through alteration, improper instal-  
lation, mishandling, misuse, neglect, accident, or by removal or defacement of the  
factory serial number/bar code label(s). THE EXTENT OF THE COMPANY’S LIABILITY  
UNDER THIS WARRANTY IS LIMITED TO THE REPAIR OR REPLACEMENT PROVIDED  
ABOVE AND, IN NO EVENT, SHALL THE COMPANY’S LIABILITY EXCEED THE PUR-  
CHASE PRICE PAID BY PURCHASER FOR THE PRODUCT.  
This Warranty is in lieu of all other express warranties or liabilities. ANY IMPLIED  
WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, SHALL  
BE LIMITED TO THE DURATION OF THIS WRITTEN WARRANTY. ANY ACTION FOR  
BREACH OF ANY WARRANTY HEREUNDER INCLUDING ANY IMPLIED WARRANTY OF  
MERCHANTABILITY MUST BE BROUGHT WITHIN A PERIOD OF 24 MONTHS FROM  
DATE OF ORIGINAL PURCHASE. IN NO CASE SHALL THE COMPANY BE LIABLE FOR  
ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES FOR BREACH OF THIS OR ANY  
OTHER WARRANTY. No person or representative is authorized to assume for the  
Company any liability other than expressed herein in connection with the sale of  
this product.  
Some states do not allow limitations on how long an implied warranty lasts or the  
exclusion or limitation of incidental or consequential damage so the above limita-  
tions or exclusions may not apply to you. This Warranty gives you specific legal  
rights and you may also have other rights which vary from state to state.  
Audiovox Electronics Corporation,  
150 Marcus Blvd., Hauppauge, New York 117881 1-800-645-4994 128-7385A  
26  
NOTES  
27  
© 2012 Audiovox Electronics Corp., Hauppauge, NY 11788  
128-9095A  

Quasar VML458 User Manual
Phoenix Gold Car Amplifier R10001 User Manual
Philips AQ 4420 User Manual
Panasonic WVCF20 User Manual
Orion Car Audio 2125SX User Manual
Melissa 746085 User Manual
Magnadyne pioneer XV DV323 User Manual
Lochinvar Kight XL 400 801 User Manual
Kenwood Car Stereo System KDC M4524G User Manual
JVC KD S675 User Manual