Philips CED1700 User Manual

Register your product and get support at  
CED1700  
EN  
Quick Start Guide  
b
R - C H  
L - C H  
R - C H  
L - C H  
1
5
6
7
"
!
0
/
§ $ %  
9
8
2
P
&
R
N
D
2
3
L
4
2
a
5mm  
183 mm  
53mm  
b
2
c
3
4
English  
8
Purple and Right speaker (Rear)  
purple/black  
wires  
Install the car audio  
2 Connect the other end of the supplied  
These instructions are for a typical installation.  
However, if your car has different requirements,  
make the corresponding adjustment. If you have  
any questions regarding installation kits, consult  
your Philips car audio dealer.  
standard connector to the car audio  
b
system.  
Connector/  
Obeject  
Connect to/with  
1
2
Pink wire  
Extension wire  
2.5m extension Parking brake (-)  
wire(Not  
included)  
1
Connect wires  
1 Check the car’s wiring carefully, then  
a
connect them to the supplied ISO wires.  
3
4
5
Brake switch  
Ground  
Connector Connect to  
ISO wires  
Grey wire  
Black wire  
Connected in step 1  
above.  
1
2
Yellow wire The +12V car battery which  
is live at all times.  
6
7
Rear line out Left/  
Right  
Blue wire  
The electric antenna control  
lead or power supply lead of  
the antenna booster  
If there is no electric antenna  
or antenna booster, or it is  
manually operated telescopic  
antenna, it is not necessary  
to connect this lead.  
Front line out Left/  
Right  
8
9
Blue cable  
Red cable  
Subwoofer  
Aux Right  
10 White cable  
11 Yellow cable  
12 Yellow cable  
13 Yellow cable  
14 Yellow cable  
15 Purple wire  
16 Gearbox switch  
Aux Left  
Video in  
3
4
Black wire  
Red wire  
A metal surface of the car  
First connect the black  
ground (earth) lead, then  
connect the yellow and red  
power supply leads.  
Camera in  
Video out 1  
Video out 2  
Reverse camera (B+)  
The +12V power terminal  
which is live in the  
accessory (ACC) position of  
the ignition switch  
If there is no accessory  
position, connect to the  
+12V car battery terminal  
that is always live. Be sure  
to connect the black ground  
(earth) lead to a metal  
surface of the car rst.  
17 Reverse gear  
signal  
Back lamp lead +  
2
Mount in the dashboard  
1 If the car does not have an on-board drive  
or navigation computer, disconnect the  
negative terminal of the car battery.  
5
6
7
Green and Left speaker (Rear)  
green/black  
wires  
2 Ensure that car dashboard opening is within  
a
these measurements:  
White and Left speaker (Front)  
3 Slide the unit into the dashboard until a  
white/black  
wires  
b
click sound is heard.  
c
4 Attach the trim plate.  
5 Reconnect the negative terminal of the car  
Gray and  
gray/black  
wires  
Right speaker (Front)  
battery.  
SetTime  
Turn on  
1 Touch [Set time].  
2 Touch hour/minute digit to highlight the digit.  
3 Touch / to set hour/minute.  
1 Press to turn on the unit.  
Set time format  
1 Touch[Clock Mode]repeatedly to toggle  
between [12Hr] and [24Hr] options.  
Listen to Radio  
2 Touch a language to select.  
1 Touch to display home menu.  
2 Touch [Radio].  
To adjust screen brightness, press DIMMER  
on the remote control, then press or  
.
To turn off the unit, press and hold for 3  
seconds.  
Set date and time  
1 Touch to display main menu.  
3 Touch on FM or AM repeatedly on the left  
of the screen to select band:  
Radio  
Disc  
USB  
SDHC  
Sun  
4 Briey touch or to tune to a radio  
Sep 27, 2009  
station by step.  
Touch or for over 1 seconds to  
tune to a radio station automatically.  
AV_IN1  
Navigation  
Settings  
2 Touch [Settings].  
3 Touch to access 2nd page.  
3
Play disc  
4 Touch [Date].  
You can play video, audio or images stored on the  
following discs:  
DVD video, DVD-R, DVD-RW  
VCD  
Audio CD, CD-R, CD-RW  
1 Insert the disc into the disc slot with label  
side facing up.  
Countries where you Supported DVD  
bought the unit  
region code  
5 Touch year digit to highlight this digit.  
China  
6 Touch / to set year.  
7 Repeat step 5 and 6 to set month and day.  
Asia Pacic, Taiwan,  
Korea  
Receive call  
By default, all incoming calls are received  
automatically.  
Latin America  
Russia, India  
1 If there is incoming call, [Incoming call...]  
ashes on the screen. Speak into the  
Bluetooth microphone.  
2 When conversation ends, tap  
(red) to  
terminate the call.  
4
Play USB device  
Note  
Ensure that the device contains playable  
content.  
1 Open the lid of USB socket.  
2 Insert the USB to the USB socket.  
Play with Bluetooth device  
Pair the Bluetooth-enabled devices  
1 Turn on the Bluetooth function on your  
device.  
2 Search for other Bluetooth device with  
your device.  
3 Select “CED1700” in the pairing list.  
4 Enter default password “0000”.  
Make a call  
1 Touch on top of the screen.  
2 Touch number icons directly to input  
phone number.  
3 After the phone number entered, touch  
.
© 2010 Koninklijke Philips Electronics N.V.  
All rights reserved.  
Document order number: CED1700_00_QSG_V3.0  

Rockford Fosgate FNQ3514 User Manual
Rockford Fosgate FNQ3146 User Manual
PYLE Audio PLTCDN7 User Manual
Pioneer S IW631 LR User Manual
Pelco Camera Lens 23FA8 User Manual
Panasonic P2HD AG HPX370P User Manual
Panasonic CQ C1304U User Manual
Olympus VS259601 User Manual
Kicker KS25 User Manual
Kambrook Cable Box keb542 User Manual