Philips CE130 User Manual

Rwegwistewr yo.upr hproildiupctsan.dcgoetmsup/pworteatlcome  
CE130  
EN  
User manual  
Do not place any sources of danger on  
the apparatus (e.g. liquid filled objects,  
lighted candles).  
1 Important  
Safety  
Notice  
Read and understand all instructions  
before you use your apparatus. If damage  
is caused by failure to follow instructions,  
the warranty does not apply.  
This apparatus is designed for negative  
ground (earth) 12 V DC operation only.  
To ensure safe driving, adjust the volume  
to a safe and comfortable level.  
Improper fuses can cause damage or  
fire. When you need to change the fuse,  
consult a professional.  
The making of unauthorized copies of  
copy-protected material, including computer  
programs, files, broadcasts and sound  
recordings, may be an infringement of  
copyrights and constitute a criminal offence.  
This equipment should not be used for such  
purposes.  
Use only the supplied mounting hardware  
for a safe and secure installation.  
To avoid short circuit, do not expose the  
apparatus, remote control or remote  
control batteries to rain or water.  
Never insert objects into the ventilation  
slots or other openings on the apparatus.  
Clean the apparatus and frame with a  
soft, damp cloth. Never use substances  
such as alcohol, chemicals or household  
cleaners on the apparatus.  
Windows Media and the Windows logo are  
trademarks, or registered trademarks of  
Microsoft Corporation in the United States  
and/or other countries.  
This apparatus includes this label:  
Never place any objects other than discs  
into the apparatus.  
Never use solvents such as benzene,  
thinner, cleaners available commercially,  
or anti-static sprays intended for discs.  
Visible and invisible laser radiation when  
open. Avoid exposure to beam.  
Risk of damage to the apparatus screen!  
Never touch, push, rub or strike the  
screen with any object.  
Recycling  
Your product is designed and manufactured  
with high quality materials and components,  
which can be recycled and reused.  
When you see the crossed-out wheel bin  
symbol attached to a product, it means the  
product is covered by the European Directive  
2002/96/EC:  
Caution  
Use of controls or adjustments or  
performance of procedures other than herein  
may result in hazardous radiation exposure or  
other unsafe operation.  
The apparatus shall not be exposed to  
dripping or splashing.  
4
EN  
Specifications are subject to change without  
notice. Trademarks are the property of  
Koninklijke Philips Electronics N.V. or their  
respective owners. Philips reserves the right  
to change products at any time without being  
obliged to adjust earlier supplies accordingly.  
Never dispose of your product with other  
household waste. Please inform yourself about  
the local rules on the separate collection of  
electrical and electronic products. The correct  
disposal of your old product helps prevent  
potentially negative consequences on the  
environment and human health.  
Your product contains batteries covered by  
the European Directive 2006/66/EC, which  
cannot be disposed of with normal household  
waste.  
Please inform yourself about the local rules on  
separate collection of batteries. The correct  
disposal of batteries helps prevent potentially  
negative consequences on the environment  
and human health.  
This product complies with the radio  
interference requirements of the European  
Community.  
Environmental information  
All unnecessary packaging has been omitted.  
We have tried to make the packaging easy to  
separate into three materials: cardboard (box),  
polystyrene foam (buffer) and polyethylene  
(bags, protective foam sheet.)  
Your system consists of materials which can  
be recycled and reused if disassembled by  
a specialized company. Please observe the  
local regulations regarding the disposal of  
packaging materials, exhausted batteries and  
old equipment.  
Any changes or modifications made to this  
device that are not expressly approved by  
Philips Consumer Lifestyle may void the user’s  
authority to operate the equipment.  
2010 © Koninklijke Philips Electronics N.V. All  
rights reserved.  
EN  
5
h User manual  
2 Your car audio  
system  
i Quick start guide  
a
b
d
Congratulations on your purchase, and  
welcome to Philips!To fully benefit from the  
support that Philips offers, register your product  
c
Introduction  
With the in-car audio system, you can enjoy  
your drive while listening to:  
FM or AM (MW) radio  
Audio from USB devices  
Audio from SD/SDHC card  
Audio from other external devices  
g
i
e
h
f
The unit supports the following media format:  
What’s in the box  
Check and identify the contents of your  
package:  
a Main unit (with a sleeve)  
b Carrying case (includes the front panel)  
c Trim plate  
d ISO male connector  
e Rubber cushion  
f Screws x 4 pcs  
g Disassembly tools x 2 pcs  
6
EN  
Overview of the main unit  
a
b
c
d
o
n m l  
k
j i  
h
g
f
e
q
p
d
a
b
USB socket.  
Unlock the panel.  
6281'  
e MP3 LINK  
Connect external audio device.  
Turn on or off Maximizing volume.  
f +SONG/FOLDER -/PRESET  
c BAND/  
Select preset radio station.  
Search for track/folder.  
Select tuner band.  
Return to previous menu.  
EN  
7
g OPTIONS/CLOCK  
Access option menu.  
View clock.  
h
/
Tune for radio station.  
Skip/search for track.  
Fast forward/backward playback.  
i DISP  
Display current status.  
j MENU  
Access system menu.  
k
/
Turn the unit on or off.  
Confirm selection.  
Mute or unmute sound.  
Rotate to adjust settings.  
l EQ AUDIO  
Select equalizer (EQ) setting.  
Access audio setting menu.  
m SOURCE  
Select audio source.  
n ZONE  
Switch the music listening zone.  
o DBB  
Turn on/off Dynamic Bass Boost  
(DBB) sound.  
p RESET  
Restore default settings.  
q SD card slot  
8
EN  
Note on the power supply lead (yellow)  
3 Get started  
When you connect other devices to this  
system, ensure that the rating of the car  
circuit is higher than the total fuse value  
of all the connected devices.  
Caution  
Notes on speaker connection  
Use the controls only as stated in this user  
manual.  
Never connect speaker wires to the  
metal body or chassis of the car.  
Never connect speaker wires with stripes  
to one another.  
Always follow the instructions in this chapter in  
sequence.  
If you contact Philips, you will be asked for the  
model and serial number of your apparatus.The  
model number and serial number are on the  
bottom of your apparatus.Write the numbers  
here:  
Connect wires: ISO male connectors  
Caution  
Model No. __________________________  
Serial No. ___________________________  
Ensure that all loose leads are insulated with  
electrical tape.  
Note  
Install the car audio  
Consult a professional to connect CE130 as  
instructed below.  
These instructions are for a typical installation.  
However, if your car has different requirements,  
make the corresponding adjustment. If you have  
any questions regarding installation kits, consult  
your Philips car audio dealer.  
1 Connect the supplied male connector to  
the unit.  
Caution  
This unit is designed for negative ground  
(earth) 12 V DC operation only.  
Always install this unit in the car dashboard.  
Other locations can be dangerous as the rear  
of the unit heats up during use.  
To avoid short-circuit: before you connect,  
ensure that the ignition is off.  
Ensure that you connect the yellow and red  
power supply leads after all other leads are  
connected.  
Ensure that all loose leads are insulated with  
electrical tape.  
Ensure that the leads do not get caught under  
screws orin parts that will move (e.g. seat rail).  
Ensure that all ground (earth) leads are run to  
a common ground (earth) point.  
2 Check the car’s wiring carefully and  
connect them to the supplied male  
connector.  
Use only the supplied mounting hardware for a  
safe and secure installation.  
Improper fuses can cause damage or fire.  
When you need to change the fuse, consult a  
professional.  
Note  
Risk of danger! Please consult a professional to  
perform the below steps!  
EN  
9
Connector  
ANTENNA  
Connect to  
Antenna  
a
a
a
b
b
1
2
c
d
FRONT LINE OUT Front right  
R (Socket) speaker  
FRONT LINE OUT Front left  
L (Socket) speaker  
REAR LINE OUT R Rear right  
(Socket) speaker  
REAR LINE OUT L Rear left  
(Socket) speaker  
a
b
b
c
d
3
4
5
e
c
c
d
f
g
h
d
Tip  
The pin arrangement for the ISO connectors  
depends on the type of vehicle you drive. Be  
sure to make proper connections to prevent  
damage to the unit.  
1
2
3
4
e
f
Green/  
black strip  
White/  
black strip  
Gray/black Right speaker (Front)  
strip  
Purple/  
black strip  
Red  
Left speaker (Rear)  
Left speaker (Front)  
Mount into the dashboard  
1 If the car does not have an on-board  
drive or navigation computer, disconnect  
the negative terminal of the car battery.  
Right speaker (Rear)  
Ignition key +12V DC  
when ON/ACC  
Motor/electric antenna  
relay control lead/  
Amplifier relay control  
lead  
If you disconnect the car battery in  
a car that has an on-board drive or  
navigation computer, the computer  
may lose its memory.  
If the car battery is not disconnected,  
to avoid short-circuit, ensure that the  
bare wires do not touch each other.  
Blue  
g
h
Black  
Yellow  
Ground  
To the +12V car  
battery which is  
energized at all times  
2 Ensure that car dashboard opening is  
within these measurements:  
3 Connect the antenna and amplifier as  
illustrated, if applicable.  
5mm  
L
Rear  
Front  
183 mm  
R
53mm  
10 EN  
3 Remove the mounting sleeve with the  
supplied disassembly tools.  
6 Slide the unit into the dashboard until you  
hear a click sound.  
4 Install the sleeve into the dashboard and  
bend the tabs outward to fix the sleeve.  
Note  
If the unit is not fixed by sleeve but by the  
supplied screws, skip this step.  
53.5 m m  
183 mm  
7 Reconnect the negative terminal of the  
car battery.  
5 Place the supplied rubber cushion over  
the end of the mounting bolt.  
EN 11  
Attach the front panel  
1 Attach the trim plate.  
2 Press  
/
repeatedly until the current  
time is displayed.  
3 Rotate clockwise to set hour.  
4 Press to confirm.  
5 Rotate counterclockwise to set minute.  
6 Press to confirm.  
View clock  
1 Press and hold OPTIONS repeatedly  
until the clock is displayed.  
2 Insert the right side of the panel in the  
chassis until it is correctly engaged.  
1
2
3 Press the left side of the panel until it is  
locked into place.  
Turn on  
1 Press to turn on the unit.  
To turn off the unit, press for over  
3 seconds.  
Set clock  
1 Press MENU.  
12 EN  
Store radio stations in  
memory  
4 Listen to radio  
You can store up to 6 stations in each band.  
Tune to a radio station  
Store stations automatically  
1 Press SOURCE repeatedly to select radio  
mode.  
1 Press OPTIONS repeatedly until  
2 Press BAND/ to select band: [FM1],  
[AUTO-STORE] displays.  
[FM2], [FM3], [AW1] or [AW2] .  
2 Press to confirm.  
3 Press  
or  
to tune to a radio station  
» The six strongest stations of the  
selected band are saved in preset  
channel automatically.  
manually.  
» The radio station is broadcast.  
» To search for a radio station  
automatically, press  
3 seconds.  
or  
for over  
Store stations manually  
1 Tune to a station that you want to store.  
(see ‘Tune to a preset station’ on page  
14)  
Select tuner region  
You can select suitable country/region of the  
radio.  
2 Press and hold +/PRESET or -/RRESET to  
enter storing mode.  
» The preset number starts to blink..  
1 Press SOURCE to select Radio mode.  
2 Press MENU.  
3 Press +/PRESET or -/RRESET to select  
radio channel.  
3 Press  
/
repeatedly until [AREA]  
displays.  
4 Press to confirm.  
» The station is saved in the selected  
channel.  
4 Rotate to select:  
[USA]  
[LATIN]  
[Europe]  
[OIRT]  
» The preset number on LCD screen  
lights up and remains on.  
Select tuner sensitivity  
To receive more radio stations or only  
stations with strong signal, you can adjust the  
tuner sensitivity.  
Tune to a preset station  
1 Press BAND/ to select band.  
2 Press +/PRESET or -/RRESET to select  
the preset station.  
1 Press OPTIONS repeatedly to select  
[LOCAL SEEK].  
2 Rotate to select a setting:  
[LOCAL SEEK ON]: Only stations  
with strong signal can be broadcast.  
[LOCAL SEEK OFF]: Stations with  
strong and weak signals can be  
broadcast.  
EN 13  
1 Press to release the panel.  
5 Play audio files  
2 Push the left side of the panel rightward,  
then pull the panel towards you to  
disengage it from the chassis.  
Play from USB  
3 Insert the card into the card slot.  
» The unit starts playing from the card  
automatically.  
Note  
Ensure that the USB device contains playable  
music.  
Insert the USB device  
1 Slide the USB socket cover marked  
to the left.  
2 Insert the USB device into the USB  
socket.  
» The unit starts to play from the USB  
device automatically.  
Remove the card  
1 Press to turn off the unit.  
2 Press the card until you hear a click  
sound.  
» The card is now disengaged.  
3 Remove the card.  
Play options  
To pause, press  
.
To resume play, press again.  
Remove the USB device  
To skip to the previous/next track, press  
/
.
1 Press to turn off the unit.  
To search backward/forward rapidly  
2 Remove the USB device.  
within the current track, press  
3 seconds.  
/
for  
Insert a card  
Note  
This unit supports SD and SDHC cards.  
14 EN  
Search for an MP3/WMA track  
Shuffle play  
Search within the current folder  
You can play the tracks in random order:  
1 Press +SONG.  
» The name of the current track is  
displayed.  
1 During play, press OPTIONS repeatedly  
until [RANDOM] is displayed.  
2 Rotate to select a setting:  
[RANDOM OFF]: Turn off random  
play.  
[RANDOM FLD]: start random play  
for all tracks in the current folder.  
[RANDOM ALL]: start random play  
for all tracks.  
2 Rotate to select another track in current  
folder.  
3 Press to confirm.  
Search in other folder  
1 Press FOLDER -.  
» The name of the current folder is  
displayed.  
Intro play  
You can play the first 10 seconds of each  
track.  
2 Rotate to navigate through all folders.  
3 Press to access the selected folder.  
4 Rotate to select a track in the folder.  
5 Press to start play.  
1 During play, press OPTIONS repeatedly  
until [INTRO] is displayed.  
2 Rotate to select a setting:  
[INTRO OFF]: Cancel intro play and  
start normal play.  
[INTRO FLD]: Start introl play in the  
current folder.  
[INTRO ALL]: Play the first 10  
seconds of each track.  
Tip  
To go back to upper level of a folder, press  
.
View play information  
1 During playing, press DISP repeatedly to  
Connect external sound source  
view:  
Track number and elapsed play time  
1 Connect the external sound source to  
Folder  
File  
Title  
Album  
Artist  
MP3 LINK socket with a 3.5 mm cable.  
2 Press SOURCE repeatedly until [MP3  
LINK] is displayed.  
3 Operate the external component (refer  
to the instructions supplied with the  
external component).  
Repeat play  
1 During play, press OPTIONS repeatedly  
until [REPEAT] is displayed.  
2 Rotate to select a setting.  
[REPEAT ALL]: play all tracks repeatedly.  
[REPEAT TRK]: play current track  
repeatedly.  
[REPEAT FLD]: play all tracks in the  
current folder repeatedly.  
EN 15  
2 Press EQ/Audio again to select a preset  
6 Adjust sound  
EQ setting:  
[OPTIMAL] (optimal)  
[FLAT] (flat)  
Adjust volume  
[POP] (pop)  
[USER] (user)  
[TECHNO] (techno)  
[ROCK] (rock)  
[CLASSIC] (classic)  
[JAZZ] (jazz)  
1 Turn clockwise/counterclockwise to  
increase/decrease volume.  
Mute  
Switch music listening zone  
You can turn off the sound of your audio.  
1 During play, press  
.
Philips’ innovative Zone technology enables  
driver or passengers to enjoy music with the  
best speakers balance and experience more  
vivid spacial effect as the artist is intended to  
create.You can switch the music listening zone  
from driver to passengers for the best speaker  
sound settings in car.  
To resume sound, press again.  
Tunr on/off Max Sound  
6281'  
1 Press  
.
» The current setting is displayed.  
1 Press ZONE.  
» The current setting is displayed.  
» [MAX ON]:The maximum sound  
(max sound) function is on.  
2 Rotate to select a setting:  
» [MAX OFF]:The maximum sound  
[ZONE ALL]  
function is off.  
[FRONT]  
[F. LEFT] (Front left)  
[F. RIGHT] (Front right)  
3 Press OK to confirm the selection.  
Turn Dynamic Bass Boost  
(DBB) on/off  
Other sound settings  
1 Press DBB and the current setting is  
displayed:  
You can also adjust the preset EQ/Audio  
settings.  
» [DBB ON] :The Dynamic Bass Boost  
(DBB) function is on.  
1 Press EQ/Audio for 3 seconds.  
» [DBB OFF] :The DBB function is off.  
2 Press  
/
repeatedly to select the item  
2 Press DBB again to change the DBB  
to be adjusted:  
setting.  
[BAS] (Bass) range: -7 to +7  
[TRE] (Treble) range: -7 to +7  
[BAL] (Balance) range: 12L to 12R.  
(L= left speaker, R = right speaker)  
[FAD] (Fader) range: 12R to 12F. (R  
= rear speaker, F = front speaker)  
Select preset equalizer  
1 Press EQ/Audio.  
» Current Equalizer setting is displayed.  
3 Rotate to select a value/option.  
16 EN  
[DEMO ON] : Turn on the demo  
mode. When the unit is idle for  
more than 10 seconds, all functions  
are displayed.  
[DEMO OFF] : Turn off the demo  
mode.  
7 Adjust system  
settings  
Turn beep sound on/off  
Each time you press a button, the unit beeps.  
You can turn on or off this beep sound.  
Reset  
1 Press MENU.  
You can reset the unit to its default setting.  
2 Press  
/
repeatedly until [BEEP]  
1 Detach the front panel.  
displays.  
2 Press the reset button by using a ball-  
3 Rotate to select a setting:  
point pen or a similar tool.  
[BEEP ON]: Turn on the beep  
sound.  
[BEEP OFF]: Turn off the beep  
sound.  
» Preset adjustments such as preset  
channels and sound adjustments are  
erased.  
Select blackout setting  
You can set the screen to turn off automatically  
after the unit is idle for 10 or 20 seconds.  
RESET  
1 Press MENU.  
2 Press  
/
repeatedly until [BKO] is  
displayed.  
3 Rotate to select a setting:  
[BKO 10 S] : Turn off the screen  
automatically 10 seconds after last  
operation.  
[BKO 20 S] : Turn off the screen  
automatically 20 seconds after last  
operation.  
[BKO OFF] : Never turn off the  
screen.  
Turn demo mode on/off  
1 Press MENU.  
2 Press  
/
repeatedly until [DEMO]  
displays.  
3 Rotate to select a setting:  
EN 17  
8 Additional  
information  
Detach the front panel  
You can detach the front panel to deter theft.  
1 Press to release the panel.  
2 Push the left side of the panel rightward.  
Note  
If the new fuse gets damaged again, there may  
be an internal malfunction. Consult your Philips  
dealer.  
Remove the unit  
You can remove the unit from the dashboard.  
1 Detach the front panel and the trim plate.  
2 Pull out the unit by using the disassembly  
tools.  
3 Pull the panel towards you to disengage it  
from the chassis.  
4 Store the panel in the supplied carry case  
to protect it from dirt or damage.  
Replace fuse  
If the fuse is damaged,  
1 Check the electric connection.  
2 Buy a fuse that matches the voltage of the  
damaged fuse.  
3 Replace the fuse.  
18 EN  
Compatible USB devices:  
9 Product  
information  
USB flash memory: USB 1.1 host with  
interface reading all speed support (1.1,  
2.0)  
USB flash players: USB 1.1 host with  
interface reading all speed support (1.1,  
2.0)  
Note  
Memory cards (SD / SDHC)  
Product information is subject to change  
without prior notice.  
Supported formats:  
USB or memory file format: FAT16,  
FAT32  
Power supply  
12 V DC (11 V  
- 16 V), negative  
ground  
MP3 bit rate (data rate): 32-320 Kbps and  
variable bit rate  
WMA V4, V7, V8, V9 (L1, L2)  
ISO9660, Joliet  
Maximum title number: 512 (depending  
on file name length)  
Fuse  
15 A  
Suitable speaker  
impedance  
4 - 8  
Maximum power output 45 W x 4 channels  
Maximum album number: 255  
Supported sampling frequencies: 2 kHz,  
44.1 kHz, 48 kHz  
Continuous power  
output  
22 W x 4 RMS  
(4 10% T.H.D.)  
Supported Bit-rates: 2~256 (kbps),  
variable bit rates  
Directory nesting up to a maximum of 8  
levels  
Number of albums/ folders: CD  
maximum 99, USB maximum 199  
Number of tracks/titles: maximum 999  
ID3 tag v2.0 or later  
File name in Unicode UTF8 (maximum  
length 64 bytes)  
Pre-Amp output voltage 2.5 V  
Aux-in level  
Dimensions (W x H  
x D)  
500 mV  
188 x 58 x 140  
mm  
Weight  
0.8 kg  
Radio  
Frequency range 87.5 - 108.0 MHz (100kHz  
- FM  
per step in auto search and  
50kHz per step in manual  
search)  
Unsupported formats:  
Empty albums: an empty album is an  
album that does not contain MP3/WMA  
files, and is not be shown in the display.  
Unsupported file formats are skipped. For  
example, Word documents (.doc) or MP3  
files with extension .dlf are ignored and  
not played.  
Frequency range 522 - 1620 KHz (9 kHz)  
- AM (MW) 530 - 1710 kHz (10 kHz)  
Usable sensitivity 8 μV  
- FM  
Usable sensitivity 30 μV  
- AM(MW) (S/N  
= 20 dB)  
AAC, WAV, PCM audio files  
DRM protected WMA files (.wav, .m4a,  
.m4p, .mp4, .aac)  
WMA files in Lossless format  
EN 19  
10 Troubleshooting  
Caution  
Never remove the casing of this apparatus.  
To keep the warranty valid, never try to repair  
the system yourself.  
If you encounter problems when using this  
apparatus, check the following points before  
requesting service. If the problem remains  
unsolved, go to the Philips web site (www.  
philips.com/support).When you contact Philips,  
ensure that your apparatus is nearby and the  
model number and serial number are available.  
No power or no sound.  
Car engine is not on. Turn the car engine  
on.  
Cable is not correctly connected. Check  
connections.  
Fuse is burnt. Replace fuse.  
Volume is too low. Adjust volume.  
If the above solutions cannot help, press  
the RESET button.  
Ensure that the track played is of a  
compatible format.  
Noise in broadcasts.  
Signals are too weak. Select other  
stations with stronger signals.  
Check the connection of the car antenna.  
Change broadcast from Stereo to mono.  
Preset stations lost.  
Battery cable is not correctly connected.  
Connect the battery cable to the terminal  
that is always live.  
Display show ERR-12  
USB data error. Check the USB device.  
Display show ERR-3  
USB/SD data error.  
20 EN  
11 Glossary  
M
MP3  
A file format with a sound data compression  
system. MP3 is the abbreviation of Motion  
Picture Experts Group 1 (or MPEG-1) Audio  
Layer 3. With the MP3 format, one CD-R or  
CD-RW can contain about 10 times more  
data than a regular CD.  
S
SD  
Secure Digital. A type of memory card with a  
flash memory.  
SDHC  
Secure Digital High Capacity (SDHC) is a  
type of flash memory card based on the SDA  
2.00 specification. The SDA 2.00 specification  
enables SD cards to reach higher capacities  
from 4GB to 32GB, and growing.  
W
WMA (Windows Media Audio)  
An audio format owned by Microsoft, is a  
part of Microsoft Windows Media technology.  
Includes Microsoft Digital Rights Management  
tools, Windows Media Video encoding  
technology, and Windows Media Audio  
encoding technology.  
EN 21  
© 2010 Koninklijke Philips Electronics N.V.  
All rights reserved.  
CE130_78_UM_V1.0  

Polk Audio R Series Loudspeakers R15 User Manual
Pioneer DEH P88RS User Manual
Panasonic HDC27H User Manual
Panasonic CQ VA707N User Manual
Panasonic Camera Recorder User Manual
Nikon SB 400 User Manual
Lochinvar SOLUTION CB 090 User Manual
Legacy Car Audio LBF127 User Manual
KitchenAid Blender KHB100 User Manual
JVC KD ADX44 User Manual