AZ3068
CD Soundmachine
PHILIPS CONSUMER ELECTRONICS COMPANY
Marietta, GA 30006-0026, U.S.A.
Register your product and get support at
Meet Philips at the Internet
Philips vous remercie de
Thank you for choosing Philips.
Gracias por escoger Philips
votre confiance.
Need help fast?
Besoin d'une aide
rapide?
Le Guide rapide de début et Manuel de
l'utilisateur regorgent d'astuces destinées à
simplifier l'utilisation de votre produit Philips.
Toutefois, si vous ne parvenez pas à résoudre
votre probléme, vous pouvez accéder à
notre aide en ligne à l'adresse
Necesita ayuda
inmediata?
Lea primero la Guía rápida del comienzo
o el Manual del usuario, en donde encontrará
consejos que le ayudarán a disfrutar
plenamente de su producto Philips.
Si después de leerlo aún necesita ayuda,
consulte nuestro servicio de
Read your Quick Start Guide and/or
User Manual first for quick tips
that make using your Philips product
more enjoyable.
If you have read your instructions
and still need assistance,
you may access our online help at
asistencia en línea en
W
CLASS 1
LASER PRODUCT
AZ3068
Printed in China
PDCC-JH-0811
1
2
6
1 2 3 4 5 6 7
7
3
# @!09 8
8
4
1
CD
TUNER
9
2
3
4
3
$
TUNING +
0
4
TUNING –
PROG
!
@
#
REPEAT
5
6
DISPLAY
BAND
SEARCH
SHUFFLE
%
^
9
5
7
8
$
DBB
MUTE
%
English
CONTROL
0
Congratulations on your purchase and wel-
come to Philips!
@ PROGRAM
CD/MP3/WMA: programs tracks and reviews the
program;
Tuner: programs preset radio stations
# Display – shows the status of the set
To fully benefit from the support that Philips
offers, register your product at
C
B
A
A
SUPPLIED ACCESSORIES
BACK PANEL
– AC mains lead
– Remote control
$ Telescopic aerial – improves FM reception
% AC MAINS – inlet for mains lead
^ Battery compartment – for 6 batteries, type
R-20, UM1 or D-cells
TOP AND FRONT PANELS (See 1)
1
p– 3.5 mm stereo headphone socket
X
Helpful hints: The speakers will be muted when
headphones are connected to the set.
AUX – 3.5 mm line-injack for external audio
appliance
REMOTE CONTROL (See 1)
2
1 TUNER – selects tuner source
2 CD – selects CD sound source
3 TUNING -, + – tunes to tuner stations
4 ∞, § – skips to the beginning of a current/
previous/ subsequent disc track
5 REPEAT – select repeat modes
6 SHUFFLE – selects shuffle modes
7 ALBUM/PRESET 3,4 –
MP3/WMA only : select next/ previous album.
TUNER : select a preset station.
8 DBB – switches the bass enhancement on
(DBB1or DBB2)/ off
3
4
STANDBYy– power on/ off switch
Source selector – selects CD/ TUNER/ AUX/
TAPE function
5
6
IR Sensor – infrared sensor for remote control
Cassette recorder keys
RECORD 0 – starts recording
PLAY 1 – starts playback
SEARCH 5/6 – fast winds/rewinds tape
STOP•OPEN 9/
– opens the cassette compartment
– stops the tape
A
6 x D-cells - R20 - UM1
PAUSE ; – pauses playback or recording
9 9 – stops disc playback;
7 OPEN•CLOSE - press to open/close CD door
– erases a disc program
8 DBB – switches the bass enhancement on (DBB1
or DBB2) / off
9 VOLUME – adjusts volume level
0 FM•MW•DISPLAY
TUNER: selects wavebands
MP3/WMA: display MP3/WMA-CD information
! Navigation controls
0 2; – starts/ pauses disc playback
! PROGRAM
CD/MP3/WMA: programs tracks and reviews the
program;
Tuner: programs preset radio stations
@ SEARCH 5, 6 – searches backwards/ forwards
within a disc track
Remove the insulation plastic tab.
Retirez la feuille de protection en
plastique.
PRESET (ALB/ PRE) -, + (down, up) –
MP3/WMA only : selects previous / next album.
TUNER : selects a preset station.
9 – stops CD playback;
– erases a CD programme
SEARCH ∞, § –
CD/MP3/WMA: – searches backwards and for-
wards within a track;
– skips to the beginning of a current/
previous/ later track
# BAND / DISPLAY
– selects wavebands
– display MP3/WMA-CD information
$ VOLUME +, - (up, down) – adjusts volume level
% MUTE – interrupts/ resumes sound
CAUTION
Use of controls or adjustments or performance
of procedures other than herein may result in
hazardous radiation exposure or other unsafe
operation.
TUNER: tunes to radio stations (down, up).
MODE – selects different play modes:
e.g. REPEAT or SHUFFLE (random order)
2; – starts or pauses disc playback
POWER SUPPLY
POWER SUPPLY
Whenever convenient, use the mains supply to
conserve battery life. Make sure you remove the
power plug from the set and wall socket before insert-
ing batteries.
BASIC FUNCTIONS
DIGITAL TUNER
DIGITAL TUNER
DIGITAL TUNER
Auto-Standby mode
Autostore
When a CD has reached the end of playback and
remains in the stop position for more than 15 minutes,
the set will switch off automatically to save mains.
When in pause position for 5 minutes, the CD playback
will stop automatically. 15 minutes later, the set
switches off.
Autostore automatically starts programming radio sta-
tions from preset 1. Any previous presets e.g. manual-
ly programmed will be erased.
Tuning to radio stations
1 Press yto on, then press Source selector
to select TUNER (or press TUNER on the remote
control) .
• Press and hold PROGRAM until
appears.
Batteries (not included)
–
is displayed briefly and then the radio
station frequency, waveband and, if programmed,
a preset number are shown. (See 3)
™ Available stations are programmed.
™After all stations are stored, the first autostore
preset station will then automatically play.
• Insert 6 batteries, type R-20, UM-1 or D-cells,
(preferably alkaline) with the correct polarity.
(See A)
BASIC FUNCTIONS
2 Press FM•MW once or more to select your
waveband. (or press BAND on the remote control)
3 Press and hold SEARCH ∞ or §
(or TUNING -, + on the remote control) until the
frequency in the display starts running.
™ The radio automatically tunes to a station of suf-
ficient reception. Display shows
ing automatic tuning.
4 Repeat steps 2-3 if necessary until you find the
desired station.
• To tune to a weak station, press ∞ or § briefly
and repeatedly until you have found optimal recep-
tion.
Switching on and off and selecting function
1 Press STANDBY y (on the set only) to switch on.
2 Press Source selector once or more to select: CD,
TUNER, AUX or TAPE function.
Remote control
Important!
To listen to a preset or autostore station
Press the PRESET (ALB/ PRE) -, + buttons once or
more until the desired preset station is displayed.
•
Before using the remote control, remove the
insulation plastic tab as shown in fig. A.
If the remote control does not function cor-
rectly or the operating range is reduced,
replace the battery with a new (CR2025) type
battery
3 Press yto switch off the set.
•
dur-
Helpful hints:
– To change from TAPE to CD, TUNER or AUX
function, or when you are switching off the set:
first, make sure you press the tape STOP 9 key to
end playback and all the cassette keys are
released.
– The tone, sound settings, tuner presets and the
volume level (up to a maximum volume level of 20)
will be retained in the set’s memory.
1 Pull the battery tray out.
2 Replace a new battery
3 Fully insert the battery tray back to the original
position.
Incorrect use of batteries can cause electrolyte leak-
age and will corrode the compartment or cause the
batteries to burst.
• Do not mix battery types: e.g. alkaline with carbon
zinc. Only use batteries of the same type for the
set.
To improve radio reception:
• For FM, extend, incline and turn the telescopic aeri-
al. Reduce its length if the signal is too strong.
• For MW, the set uses a built-in aerial. Direct this
aerial by turning the whole set.
ADJUSTING VOLUME AND SOUND
• Adjust the volume with the VOLUME control.
• When inserting new batteries, do not try to mix old
batteries with the new ones.
= Display shows the volume level
and a
Programming radio stations
You can store up to a total of 30 radio stations in the
memory, manually or automatically (Autostore).
number from 0-32. (See 2)
• Batteries contain chemical substances, so
they should be disposed of properly.
• Perchlorate Material-special handling may
Bass adjustment
There are three DBB (Dynamic Bass Boost) options:
– Off: no bass enhancement
– DBB1: moderate bass enhancement
– DBB2: strong bass enhancement
• Press DBB once or more to select your option.
™DBB1,2 appears if DBB is activated.
Manual programming
1 Tune to your desired station (see Tuning to radio
stations).
2 Press PROGRAM to activate programming.
™ Display: program flashes.
3 Press PRESET (ALB/ PRE) -, + once or more to
allocate a number from 1 to 30 for this station.
4 Press PROGRAM to confirm.
™ Display shows the preset number, waveband
and the frequency of the preset station.
5 Repeat steps 1-4 to store other stations.
Helpful hints: You can erase a preset station by
storing another frequency in its place.
hazardouswaste/perchlorate.
Using AC Mains
1 Check if the mains supply, as shown on the type
plate located on the bottom of the set, corre-
sponds to your local mains supply. If it does not,
consult your dealer or service centre.
How to MUTE the sound
1. Press MUTE on the remote control to interrupt
sound reproduction instantly.
2 Connect the mains lead to the wall socket.
3 To disconnect the mains supply, unplug the set from
the wall socket.
4 Install the unit near the AC outlet and where the
AC power plug can be easily reached.
= Playback continues without sound and in the
display flashes
.
2. To reactivate sound reproduction you can:
– press MUTE again;
– adjust the volume controls;
– change to another source.
MP3-CD/CD PLAYER
MP3-CD/CD PLAYER
MP3-CD/CD PLAYER
MP3-CD/CD PLAYER
Finding a passage within a track
1. During playback, press and hold SEARCH ∞ or §
(5, or 6 on the remote control )
= The disc is played at high speed and low vol-
ume.
Clearing a program
You can erase the contents of the memory by:
• Press
– Once, if in the stop position;
– Twice, during playback.
About MP3
Helpful Hints:
The music compression technology MP3 (MPEG1
Audio Layer 3) significantly reduce the digital data of
an audio CD while maintaining CD quality sound.
- When playing a disc with CD Audio tracks and
MP3/WMA files, the CD Audio tracks will be played
first.
9
:
•
Getting MP3 files: you can either download legal
music files from the internet to your computer hard - “0” is shown as your album number, if you have not
2. When you recognize the passage you want,
• Press STANDBY ON y
;
disc, or create such files by converting audio CD
files in your computer through appropriate encoder
software. (128kbps bit rate or higher is recom-
mended for MP3 files.)
organized your MP3/WMA files into any albums on
your disc.
release ∞ or §
.
• Select another sound source;
• open the CD door
=Normal playback continues.
5. To pause playback press 2;. Press 2; again to
resume play.
= Time digits flashes during pause. (See 4)
=
displayed briefly, and program
disappears.
Programming track numbers
•
Creating a MP3 CD: burn the music files from
your computer hard disc on a CDR or CDRW using
your CD burner.
In the stop position, select and store your CD tracks in
the desired sequence. Up to 20 tracks can be stored in
the memory.
1. In the stop position, press ∞ or § once or
repeatedly to select your desired track number.
MP3-CD/WMA only:
Different play modes: SHUFFLE and REPEAT
(See 7 - 8)
6.To stop playback, press
9.
Helpful Hints:
Helpful Hints:
You can select and change the various play modes
before or during playback. The play modes can be
combined with PROGRAM.
– Make sure that the file names of the MP3/WMA
files end with .mp3 or wma.
– Total number of music files and albums: around 350
(with a typical file name length of 20 characters).
– The length of file names affects the number of
tracks for playback. With shorter file names, more
files can be burned on a disc.
CD play will also stop when:
– the disc door is opened
– the disc has reached the end
– you select other sound sources.
•
First press ALBUM/ PRESET – or + once or more
shuffle - tracks of the entire CD/ program are
played in random order
shuffle repeat all - to repeat the entire CD/ program
continuously in random order
repeat all - repeats the entire CD/ program
repeat - plays the current track continuously
1. To select play mode, press MODE once or more.
(SHUFFLE / REPEAT on the remote control).
to find your album.
2. Press PROGRAM.
Display information (MP3/WMA-CD only)
™
and the number of tracks stored
The ID3 tag is part of an MP3/WMA file and contains
various track information such as the track´s title or
the artist´s name.
appear briefly. (See 5)
Playing a disc
™
Display shows: PROG and the selected track
•
set
During playback, press FM•MW•DISPLAY on the
This player plays Audio Discs including
CD-R/CD-RWs, and MP3 CDs.
number. (See 6)
3. Repeat steps 1-2 to select and store all desired
tracks.
4. To start playback of your disc program, press 2;.
repeatedly to view ID3 tag information or select
your display function.
• CD-I, CDV, VCD, DVD or computer CDs are not
possible.
• DRM-protected WMA disc is not supported.
1. Press STANDBY ON yonce or more to on, then
select CD source (or press CD on the remote control).
2. Press OPEN•CLOSE to open the disc door.
™Display show
2. Press 2; to start playback if in the stop position.
• If you have selected shuffle, playback starts
automatically.
– Display shows:
information is not available.
if ID3 tag
Helpful Hints:
3. To select normal playback, press MODE
repeatedly until the various modes are no longer
displayed.
Helpful Hints:
– During normal playback, you can press PROGRAM
to add a current track to your program list.
- Complete the ID3 tag information with your
MP3/WMA encoder software before burning the
MP3/WMA-CD.
when the disc door is
– You can also press the
mode in playing.
9
to cancel your play
open.
–
–
appears if you press
PROGRAM and there is no track selected.
3. Insert a disc with the printed side facing up and
press down on OPEN CLOSE to close the CD door.
,is displayed as the player scans the
contents of a disc.
•
Selecting a different track
appears if you try to store more than 20
tracks.
™
•
Press SEARCH ∞ or § ∞ or § on the
(
remote control ) once or repeatedly until the
desired track number appears in the display.
MP3-CD/WMA only:
First press ALBUM/ PRESET – or + once or more
to find your album.
Reviewing the program
– MP3-CDs may take more than 10 seconds to
read.
• In the stop position, press and hold down
PROGRAM for a while until the display shows all
your stored track numbers in sequence.
= Audio CD: the total number of tracks and the total
playing time are displayed.
MP3-CD: the total numbers of tracks and
albums are displayed respectively.
•
In the pause/stop position, press 2; to start
playback.
Helpful Hints:
– Display shows :
programmed.
if there is no track
4. Press 2; to start playback.
Helpful Hints:
=MP3-CD /WMA only:: the album/track informa-
tion appears (if the ID3 tag information is avail-
able).
–
In shuffle modes, press
beginning of the current track.
∞
to go to the
MAINTENANCE & SAFETY
MAINTENANCE & SAFETY (See 0)
AUX / CASSETTE RECORDER
CASSETTE RECORDER
GENERAL INFORMATION ON RECORDING
• Do not expose the set, batteries, CDs to humidity,
rain, sand or excessive heat caused by heating
equipment or direct sunlight.
• The apparatus shall not be exposed to dripping or
splashing.
• Adequate ventilation with a minimum gap of 6
inches between the ventilation holes and surround-
ing surfaces is necessary to prevent heat build-up.
• The ventilation should not be impeded by covering
the ventilation openings with items, such as news-
papers, table-cloths, curtains, etc..
AUX (audio cable not included) .(See 9)
• Recording is permissible insofar as copyright or.
other rights of third parties are not infringed.
• For recording, use only NORMAL type cassettes
(IEC type I) on which the tabs have not yet been
broken. This deck is not suited for recording on
CHROME (IEC II) or METAL (IEC IV) type cassettes.
• The best recording level is set automatically.
Altering the VOLUME or BASS controls will not
affect the recording.
CD player and disc handling
This 3.5mm socket allows you to connect other audio
equipment to your system.
1. Press y to on, then the source selector to select
AUX.
= Display shows: AUX and PHILIPS scrolls
2. Use an audio cable to connect the AUX socket to
the LINE OUT/headphone socket on your external
equipment.
3. To avoid noise distortion, turn down the volume on
your external equipment.
• If the CD player cannot read CDs correctly, use a
cleaning CD to clean the lens before taking the set
to repair.
• The lens of the CD player should never be touched!
• Sudden changes in the surrounding temperature
can cause condensation on the lens of your CD
player. Playing a CD is then not possible. Do not
attempt to clean the lens but leave the set in a
warm environment until the moisture evaporates.
• To protect a tape from accidental erasure, break
out the tabs. If you wish to record again, cover the
tabs with a piece of adhesive tape.
• No objects filled with liquids, such as vases, shall
be placed on the apparatus.
4. To adjust the sound and volume, use the sound
controls on your external equipment and the
AZ3068.
• Always close the CD door to avoid dust on the lens.
• No naked flame sources, such as lighted
candles, should be placed on the apparatus.
• To clean the CD, wipe in a straight line from the
centre towards the edge using a soft, lint-free
cloth. Do not use cleaning agents as they may
damage the disc.
Recording from the CD Player
• The mechanical parts of the set contain
self-lubricating bearings and must not be oiled or
lubricated.
Cassette recorder
1
2
Select CD source.
Cassette playback
1. Press yto on, then the source selector to
select TAPE.
Insert a CD and if desired, program track num-
bers.
• Never write on a CD or attach any stickers to it.
• To clean the set, use a dry cloth. Do not use any
cleaning agents containing alcohol, ammonia, ben-
zene or abrasives as these may harm the housing.
3
Press STOP•OPEN 9// to open the cassette
holder. Insert a blank tape and close the deck.
Tape deck maintenance
= Display shows
throughout tape
To ensure quality recording and playback of the tape
deck, clean parts A, B and C as shown, once a
month. Use a cotton bud slightly moistened with alco-
hol or a special head cleaning fluid to clean the deck.
1 Open the cassette door.
2 Press PLAY 1 and clean the roller C.
3 Press PAUSE ; and clean the heads A, and the
capstan B.
operation.
4
5
6
Press RECORD 0 to start recording.
2. Insert a cassette and close the door.
3. Press PLAY 1 to start playback.
4. To pause, press PAUSE ;;. Press PAUSE ; again
to resume.
5. Press SEARCH 5/6 to fast wind the tape.
6. To stop the tape, press STOP•OPEN 9/.
• Batteries (battery pack or batteries installed) shall
not be exposed to excessive heat such as sunshine,
fire or the like.
Press 2; to start CD playback.
For brief interruptions press PAUSE ;. To resume
recording, press PAUSE
;
again.
CAUTIONS:
7
To stop recording, press STOP•OPEN 9//.
- Visible and invisible laser radiation. If the
cover is open, do not look at the beam.
Helpful Hints:
Recording from the Radio
1 Tune to the desired radio station (see Tuning to
radio stations).
2 Follows steps 3, 4, 6,7 under Recording from
the CD Player.
4 After cleaning, press STOP/OPEN 9/.
- During playback, the keys are automatically
released at the end of a tape and the set is
- High voltage! Do not open.You run the risk of
getting an electric shock. The machine does
not contain any user-serviceable parts.
Safety Information
• Place the set on a hard, flat and stable surface
so that the system does not tilt.
• Where the MAINS plug or an appliance coupler is
used as the disconnet device, the disconnet device
shall remain readily operable.
switched off (unless PAUSE mode
activated.)
;
has been
- Modification of the product could result in haz-
ardous radiation of EMC or other unsafe opera-
tion.
- During fast forwarding/rewinding, the keys will
not be released at the end of a tape. To switch
off the set, make sure the cassette keys are
also released.
The making of unauthorized copies of copy-protected material, including computer
programmes, files, broadcasts and sound recordings, may be an infringement of copy-
rights and constitute a criminal offence. This equipment should not be used for such
purposes.
Specifications
Power Consumption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ≤ 24 W
Dimensions (w x h x d) . . . . . . . . . . . . . . . . . . . . . . . . . . 471 x 153 x 251 (mm)
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3.8 kg
Environmental information
We have done our best to reduce the packaging and make it easy to separate into 3
materials:cardboard, expandable polystyrene, polyethylene.
TROUBLESHOOTING
If a fault occurs, first check the points listed below before taking the set for repair. If you are
unable to remedy a problem by following these hints, consult your dealer or service centre.
Your set consists of materials which can be recycled if disassembled by a specialized
company. Please observe the local regulations regarding the disposal of packaging,
exhausted batteries and old equipment.
WARNING: Do not open the set as there is a risk of electric shock! Under no
circumstances should you try to repair the set yourself, as this will invalidate the
warranty.
No sound /power
indication
– Volume not adjusted
• Adjust the VOLUME
– No CD inserted
• Inserted a suitable disc
– Power Cord not securely connected
• Connect the AC power cord properly
Hearing Safety
– CD badly scratched or dirty
• Replace/ clean CD, see Maintenance
– Laser lens steamed up
• Wait until lens has cleared
Listen at a moderate volume.
– Batteries flat / incorrectly inserted
• Insert (fresh) batteries correctly
•
Using headphones at a high volume can impair your hearing. This product can produce sounds in decibel
ranges that may cause hearing loss for a normal person, even for exposure less than a minute. The higher
decibel ranges are offered for those that may have already experienced some hearing loss.
– Headphones connected to the set
• Disconnect headphones
The CD skips tracks
– CD damaged or dirty
• Replace or clean CD
•
Sound can be deceiving. Over time your hearing "comfort level" adapts to higher volumes of sound. So
after prolonged listening, what sounds "normal" can actually be loud and harmful to your hearing. To
guard against this, set your volume to a safe level before your hearing adapts and leave it there.
– Electrostatic discharge/interference
• Unplug the set. If batteries inserted, remove batteries
from the battery compartment. Press and hold
STANDBY ON yfor 10 seconds, then re-plug /
replace battery supply, and try activating the set again.
– CD contains non-audio files
– shuffle or program is active
• Switch off shuffle / program
To establish a safe volume level:
•
•
Set your volume control at a low setting.
Slowly increase the sound until you can hear it comfortably and clearly, without distortion.
Sound skips during MP3/WMA playback
–
MP3/WMA file made at compression level
exceeding 320kbps
• Press SEARCH ∞ or §. once or more to skip to
a CD audio track, instead of the data file
Listen for reasonable periods of time:
•
•
Prolonged exposure to sound, even at normally "safe" levels, can also cause hearing loss.
Be sure to use your equipment reasonably and take appropriate breaks.
• Use a lower compression level to record CD tracks
into MP3/WMA format
Severe radio hum or noise
– Disc damaged or dirty
• Replace or clean disc
Be sure to observe the following guidelines when using your headphones.
Listen at reasonable volumes for reasonable periods of time.
Be careful not to adjust the volume as your hearing adapts.
Do not turn up the volume so high that you can't hear what's around you.
You should use caution or temporarily discontinue use in potentially hazardous situations.
Do not use headphones while operating a motorized vehicle, cycling, skateboarding, etc.; it may create a
traffic hazard and is illegal in many areas.
– Electrical interference: set too close to TV, VCR or
computer
• Move the set to increase the distance
•
•
•
•
•
Poor cassette sound quality
Remote control does not function properly
– Dust and dirt on the heads, etc.
• Clean deck parts, see Maintenance
– Use of incompatible cassette types
(METAL or CHROME)
– Batteries flat/ incorrectly inserted
• Insert (fresh) batteries correctly
– Distance/ angle between the set too large
• Reduce the distance/ angle
• Only use NORMAL (IEC I) for recording
Poor radio reception
Recording does not work
– Weak radio signal
• FM / MW: Adjust the FM / MW telescopic aerial
– Cassette tab(s) may be broken
• Apply adhesive tape over the missing tab space
indication
–
CD-R(W) is blank/ not finalized
•
Use a finalized CD-R(W)
PHILIPS LIMITED WARRANTY
ONE (1) YEAR
This product complies with the FCC-Rules, Part 15 and with
21 CFR 1040.10. Operation is subject to the following two
conditions:
1.This device may not cause harmful interference, and
2. this device must accept any interference received, includ-
ing interference that may cause undesired operation.
WARRANTY COVERAGE:
Philips, or (d) if any Philips serial number has been removed or
defaced, or (e) product, accessories or consumables sold “AS IS”
without warranty of any kind by including refurbished Philips
product sold “AS IS” by some retailers.
PHILIPS warranty obligation is limited to the terms set forth
below.
WHO IS COVERED:
Philips warrants the product to the original purchaser or the per- This Limited Warranty does not cover:
son receiving the product as a gift against defects in materials and
workmanship as based on the date of original purchase
(“Warranty Period”) from an Authorized Dealer. The original
sales receipt showing the product name and the purchase date
from an authorized retailer is considered such proof.
•
•
Shipping charges to return defective product to Philips.
Labor charges for installation or setup of the product, adjust-
ment of customer controls on the product, and installation or
repair of antenna/signal source systems outside of the product.
Product repair and/or part replacement because of improper
installation or maintenance, connections to improper voltage
supply, power line surge, lightning damage, retained images or
screen markings resulting from viewing fixed stationary con-
tent for extended periods, product cosmetic appearance items
due to normal wear and tear, unauthorized repair or other
cause not within the control of Philips.
Damage or claims for products not being available for use, or
for lost data or lost software.
Damage from mishandled shipments or transit accidents when
returning product to Philips.
A product that requires modification or adaptation to enable
it to operate in any country other than the country for which
it was designed, manufactured, approved and/or authorized, or
repair of products damaged by these modifications.
A product used for commercial or institutional purposes
(including but not limited to rental purposes).
•
WHAT IS COVERED:
The Philips warranty covers new products if a defect in material
or workmanship occurs and a valid claim is received by Philips
within the Warranty Period. At its option, Philips will either (1)
repair the product at no charge, using new or refurbished
replacement parts, or (2) exchange the product with a product
that is new or which has been manufactured from new, or ser-
viceable used parts and is at least functionally equivalent or most
comparable to the original product in Philips current inventory,
or (3) refund the original purchase price of the product.
Philips warrants replacement products or parts provided under
this warranty against defects in materials and workmanship from
the date of the replacement or repair for ninety (90) days or for
the remaining portion of the original product’s warranty,
whichever provides longer coverage for you. When a product or
part is exchanged, any replacement item becomes your property
and the replaced item becomes Philips’ property. When a refund
is given, your product becomes Philips’ property.
•
•
•
Canada
English:
This digital apparatus does not exceed the Class B limits for radio noise emis-
sions from digital apparatus as set out in the Radio Interference Regulations of
the Canadian Department of Communications.This Class B digital apparatus
complies with Canadian ICES-003.
•
•
•
Product lost in shipment and no signature verification receipt
can be provided.
Failure to operate per Owner’s Manual.
Note: Any product sold and identified as refurbished or
renewed carries a ninety (90) day limited warranty.
TO OBTAIN ASSISTANCE IN THE U.S.A., PUERTO
RICO, OR U.S. VIRGIN ISLANDS…
Contact Philips Customer Care Center at:
1-888-PHILIPS (1-888-744-5477)
Français:
Replacement product can only be sent if all warranty
requirements are met. Failure to follow all requirements
can result in delay.
Cet appareil numérique n'émet pas de bruits radioélectriques dépassant les li-
mites applicables aux appareils numériques de Classe B prescrites dans le
Règlement sur le Brouillage Radioélectrique édicté par le Ministère des
Communications du Canada. Cet appareil numérique de la classe B est con-
forme à la norme NMB-003 du Canada.
TO OBTAIN ASSISTANCE IN CANADA…
1-800-661-6162 (French Speaking)
1-888-PHILIPS (1-888-744-5477) - (English or Spanish
Speaking)
WHAT IS NOT COVERED - EXCLUSIONS AND LIMI-
TATIONS:
This Limited Warranty applies only to the new products manu-
factured by or for Philips that can be identified by the trademark,
trade name, or logo affixed to it. This Limited Warranty does not REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS
apply to any non-Philips hardware product or any software, even
if packaged or sold with the product. Non-Philips manufacturers,
WARRANTY IS THE EXCLUSIVE REMEDY FOR THE CON-
SUMER. PHILIPS SHALL NOT BE LIABLE FOR ANY INCIDEN-
suppliers, or publishers may provide a separate warranty for their TAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF
own products packaged with the bundled product.
ANY EXPRESS OR IMPLIED WARRANTY ON THIS PROD-
UCT. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE
LAW, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT
IS LIMITED IN DURATION TO THE DURATION OF THIS
WARRANTY.
Philips is not liable for any damage to or loss of any programs,
data, or other information stored on any media contained within
the product, or any non-Philips product or part not covered by
this warranty. Recovery or reinstallation of programs, data or
other information is not covered under this Limited Warranty.
Some states do not allow the exclusions or limitation of inciden-
tal or consequential damages, or allow limitations on how long an
implied warranty lasts, so the above limitations or exclusions may
not apply to you.
This warranty does not apply (a) to damage caused by accident,
abuse, misuse, neglect, misapplication, or non-Philips product, (b)
to damage caused by service performed by anyone other than
Philips or Philips Authorized Service Location, (c) to a product or
a part that has been modified without the written permission of
This warranty gives you specific legal rights. You may have other rights which vary from state/province to state/province.
Philips, P.O. Box 671539, Marietta, GA. 30006-0026
3121 233 48802
|